In this exercise, you will learn how to:

Create geometry and organize it into components

Organize elements into the components
Rename components
Identify and delete empty components
Delete all the geometry lines
Reorder the components in a specific order
Renumber all the components, starting with ID 1 and incrementing by 1
Create an assembly
Organize the constraint

Overview
It is recommend to review the general overview before completing this tutorial.

Step 1: Retrieve the model file, bumper.hm.

Step 2: Create a component named geometry to hold the models

geometry.
1. Access the Component Collector panel in one of the following ways:
From the Menu Bar, choose Collectors > Create > Components.
 Right click in the Model Browser and click Create > Component
2. Click the Name: field and enter geometry.
3. Click color and choose yellow.
4. Leave the material and property unassigned and click Create to create the component
collector, geometry.
The message: "Component created." appears in the status bar.
Left-click once anywhere in the HyperMesh window (except on a button) to dismiss the
message in the status bar.
The component called geometry is the current component and is bold in the Model
Browser.

Step 3: Create two geometry lines and organize them into different
components.
1. Access the Lines panel by clicking Geometry > Create > Lines > Standard Nodes.
2. With the node list selector active, select two nodes, opposite and diagonal to each other, on
the same element as indicated in the following image.

3. Click create to create the line.

4. Notice the line is yellow, the same color assigned to the component, geometry. This is
because the line is organized into the current component, geometry.
5. In the Model Browser click the rigid component..
6. Right click and click Make Current in the menu.
The rigid component is now the active component.
7. With the node list selector active, select two nodes, opposite and diagonal to each other on
another element.
8. Click create to create the line.
Notice the line is the same color assigned to the component, rigid. This is because the line is
organized into the current component, rigid.
9. Click return to exit the panel.

Step 4: Move all the models geometry surfaces into the component,
geometry.
1. Click Geometry > Organize > Surfaces to access the Organize panel.
2. Go to the collectors sub-panel if not already there.
3. Switch the entity selector to surfs if not already set.
4. Click surfs >> all.
Displayed surfaces are highlighted in white indicating they are selected. All other surfaces
that are not displayed are still selected because you selected surfs >> all.
5. Click dest component= and select geometry from the list of components in the model.
6. Click move to move the selected surfaces into the geometry component.

Step 5: Move all the models shell elements (quads and trias) into the
component, center.
You should still be in the Organize panel.
1. Switch the entity selector to elems.
2. Click elems >> by collector.
A list of the models components appears.
3. Select the components, mid1, mid2, and end.
Select a component by left-clicking its name, color, or check box. A component is selected
when it has a check in its check box. To unselect a component, right-click it.
4. Click select to complete the selection of components.
5. Set dest component = to the component, center.
6. Click move to move the elements in the selected components to the component, center.
All of the shell elements should now be a cyan blue, the same color assigned to the
component, center.
7. Click return to exit the panel.

Step 6: Rename the component, center, to shells.

1. In the Model Browser select the center component..
2. Right click and click Rename in the menu.
3. Type shells for the component name and press Enter.
Step 7: Identify and delete all of the empty components.
1. Press F2 to open the Delete panel.
2. Switch the selector to comps.
3. Click preview empty.
The status bar displays the message: "3 entities are empty."
These are the mid1, mid2, and end components that no longer have elements in them.
4. Click the entity selector, comps, once to see a list of the identified empty components.
A complete list of the models components appears. The empty components are indicated
with an activated check box.
5. Click return to return to the delete panel.
6. Click delete entity.
The status bar displays the message, "Deleted 3 comps."

Step 8: Delete all the geometry lines in the model.

You should still be in the delete panel.
1. Switch the entity selector to lines.
2. Click lines >> all.
3. Click delete entity.
The two lines you created earlier are deleted.
4. Click return to exit the menu.

Step 9: Move the component, geometry, to the front in the components list.
1. From the menu bar click Collectors > Reorder > Components.
2. Click the comps selector to see a list of the models components.
3. On the right side of the panel, click the switch and select name(id). (Switch from name to
name(id).)
Notice the IDs of the components. The ID for shells is one, the ID for rigid is five, and the ID
for geometry is six.
4. Select the component, geometry.
5. Click select to complete the selection.
6. Activate the option move to: front.
7. Click reorder to apply the reorder function to the component, geometry.
The status bar displays the message, "The selected collectors have been moved."
9. Click the comps selector once to review the reordered list of components.
Notice the component, geometry, is at the top of the list. However, it still has the same ID,
six.
10. Click return to exit the panel.
Step 10: Renumber the components to be the same as their position in the
list.
1. From the menu bar click Collectors > Renumber > Components.
2. Go to the single sub-panel.
3. Switch the entity selector to comps if not already set.
4. Click the comps selector to see a list of the models components.
5. On the panels right side, click comps >> all.
6. Click select to complete the selection of components.
7. Verify start with = is set to 1.
8. Verify increment by = is set to 1.
9. Verify offset = is set to 0.
10. Click renumber to renumber the components.
11. Click the comps selector to review the models component list.
Notice the components are numbered according to their position in the list. Set the view to
name(id) if not already done to see the numbers.
12. Click return to exit the panel.
Having components with IDs that do not reflect their position in the models list of
components will not result in errors. However, having components with IDs that do reflect
their position in the models list of components can be helpful for organizational purposes.

Step 11: Create an assembly containing the components, shells and rigid.
1. From the menu bar click Collectors > Create > Assemblies .
2. For Name:, enter elements.
3. Select a Color for the assembly.
4. Click Create to create the assembly.
5. Select the rigid and shells components in the model tree.
6. Drag the components with the left mouse button over the elements assembly until it
highlights. The components are now added to the assembly.

Step 12: Create a load collector named constraints.

1. Access the Load Collector dialog box in one of the following ways:
From the menu bar click Collectors > Create > Load Collectors
Right click in the Model Browser and click Create > Load Collector
2. For Name: enter constraints.
3. Click Color and choose red.
4. Click Create to create the load collector.
The status bar displays the message: "Load collector created.
5. Left-click anywhere in the HyperMesh window (except on a button) to dismiss the message in
the status bar.
The constraints load collector is bold in the Model Browser showing it is the active load
collector. Any loads that are created will be organized into this load collector.

Step 13: Move the models one constraint into the load collector,
constraints.
The existing load collector, loads, contains several forces and one constraint. The organize
panel is used to move the one constraint in the load collector, constraints.
1. From the menu bar click Collectors > Organize > Load Collectors.
2. Go to the collectors sub-panel.
3. Switch the entity selector to loads.
4. Select loads >> by config.
5. Click config = and select const.
6. In the center of the panel, toggle from displayed to all.
7. Click select entities.
8. Verify that dest = is set to the load collector, constraints.
9. Click move to move the selected (constraints) into the load collector, constraints.

Step 14: Create a component from the Model browser.

1. Right-click in the white blank area below the list of components, materials, load collectors,
and system collectors in the Model Browser.
2. From the pop-up menu, click Create > Component.
3. Enter the name component1 in the Name: field.
4. Click the Color icon and chose the components color as pink.
5. Click Create to create the component.
 The component named component1 is appended to the list.

6. In the Model Browser, click the + button beside the Components entity to see that
Component1 is bolded in the list to indicate it is the current component.

Step 16: Review the existing assembly elements from the Model Browser.
1. Left-click the + button next to Assembly Hierarchy then click the + button next to elements
to expand its tree. Notice that it contains two components, rigid and shells.
Note that the Assemblies panel allows you to add components, which are in one assembly,
to another assembly. The Model Browser does not allow you to do this, but you can create
assemblies from it.

Step 17: Add the components, geometry and component1, to the

assembly, assem_mid, using the Model Browser.
1. Left-click the component name, geometry, to select it.
2. Press the CTRL key and left-click the component name, component1.
Press the CTRL key and left-click a selected item to deselect it.
3. Left-click any one of the selected components and drag the mouse pointer over the
assembly, assem_mid. When assem_mid is highlighted, release the mouse button.
The selected components are added to the assembly, assem_mid.
Use the SHIFT key and left mouse button to select multiple items in the Model Browser list
at one time. Left-click the first item in the list. Then press the SHIFT key and left-click the last
item in the list.

Step 18: Rename the assembly, assem_mid to assem_geom, from the

Model Browser.
1. Right-click assem_mid and click Rename.
Assem_mid is highlighted and ready for editing.
2. Type assem_geom and press Enter.

Step 19: Delete component1 from the Model Browser.

1. Right-click component1 and select Delete.
2. Confirm that you wish to delete the component by clicking Yes in the delete confirm dialog.
Component1 is deleted.
Notice that in the list, there is no bolded component name. This indicates there is no current
component specified.

Step 20: Set the current component from the Model Browser.
1. Right-click shells and select Make Current.
The component name is bolded.
.