Scribd
Upload
1K views1 page

Readme

Extract files to HDD/SSD, disable antivirus, install AutoCAD 2018 selecting components, copy keygen to HDD, launch and enter fake serial and product key to bypass activation, run keygen as admin to patch and generate a real activation code to fully register the Autodesk product.

Uploaded by

RONYROY222
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
1K views1 page

Readme

Extract files to HDD/SSD, disable antivirus, install AutoCAD 2018 selecting components, copy keygen to HDD, launch and enter fake serial and product key to bypass activation, run keygen as admin to patch and generate a real activation code to fully register the Autodesk product.

Uploaded by

RONYROY222
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

1.

) Recommended course of action is to extract all files to you HDD/SSD before r


unning setup.exe
2.) Disable antivirus or create exception for the .exe in /Crack/
3.) Install AutoCAD 2018 with selected components.
4.) Copy one of keygens (32bit or 64bit) from Crack folder to HDD.
5.) Launch the program. Select "Enter a Serial Number", agree with
the Autodesk Privacy Statement and press Activate on the
activation screen. Use 111-11111111 as Serial and 001J1 as
Product Key, and press Next.
6.) Press "Close" on the error screen and confirm that. Press
Activate again, use 111-11111111, 222-22222222 or 333-33333333
as Serial and 001J1 as Product Key, and press Next. Then select
"I have an activation code from Autodesk".
7.) Run keygen from HDD as Administrator and press Patch.
You should see "Successfully patched".
8.) Copy the Request Code from from the activation screen into the
keygen and press Generate. Copy the Activation Code back to
the activation screen and press Next.
9.) You have a fully registered autodesk product. Enjoy!
Supplied by m0nkrus & crack by x-force

You might also like