Scribd
Upload
361 views

Assignment 1

This document contains an assignment on fluid mechanics concepts with multiple questions. It includes questions about weight, mass, density, specific gravity, viscosity, surface tension, and capillary effect. Students are asked to calculate values like specific weight, kinematic viscosity, mass, density, surface tension, and capillary rise using information provided, such as fluid properties, tube dimensions, torque measurements, and liquid rise levels. The document provides context about these concepts from a fluid mechanics textbook.

Uploaded by

Alif Bukhari Imran Naim
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
361 views

Assignment 1

This document contains an assignment on fluid mechanics concepts with multiple questions. It includes questions about weight, mass, density, specific gravity, viscosity, surface tension, and capillary effect. Students are asked to calculate values like specific weight, kinematic viscosity, mass, density, surface tension, and capillary rise using information provided, such as fluid properties, tube dimensions, torque measurements, and liquid rise levels. The document provides context about these concepts from a fluid mechanics textbook.

Uploaded by

Alif Bukhari Imran Naim
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

FLUID MECHANICS - BFC10403/1043 SEM.

1
SESSION 2015/2016

ASSIGNMENT 1
1. A mass of liquid weights 400 N when exposed to standard earths
gravity g = 9.81m/s2
(a) What is its mass? (Answer : 40.77kg)
(b) What will be its weight in a planet with acceleration due to gravity
is
(i) 3.5m/s2 (ii) 18.0 m/s2 (Answer : 142.7N , 733.86N)

2. The relative density of fluid is 1.26 and its dynamic viscosity is 150
Pa.s. Calculate its
(a) Specific weight. (Answer : 12,361 N/m3)
(b) Kinematic viscosity. (Answer : 0.119m/s2)

3. Determine the weight of a 3 kg mass on a planet where the


acceleration due to
gravity is 10.00 m/s2? (Answer : 30N)

Density and Specific Gravity -From text book FLUID MECHANICS (3rd Edition in
SI Units)-Fundamental and Applications- Yunus A.Cengal , John M.Cimbala(2014)

2.2 C What is specific gravity? How is it related to density?


2.7 A fluid that occupies a volume of 24L weighs 225N at a location
where the
gravitational acceleration is 9.80 m/s2.Determine the mass of this
fluid and its density? (Answer : 23kg,0.957kg/L)

Viscosity- From text book FLUID MECHANICS (3rd Edition in SI Units)-Fundamental


and Applications- Yunus A.Cengal , John M.Cimbala(2014)

2.68C What is viscosity? What is the cause of it in liquids and in gases?


Do liquids or gases have higher dynamic viscosities?

2.73 The viscosity of a fluid is to be measured by a viscometer


constructed of two
1.5 m long concentric cylinders. The inner diameter of the outer
cylinder is 16 cm and the gap between the two cylinders is
0.09cm.The outer cylinder is rotated at 250 rpm and the torque is
measured to be 1.4N.m.Determine the viscosity of the fluid?
(Answer : 0.00997N.s/m2)

Section- 1
T1- Prepared by : NOOR ALIZA AHMAD
FLUID MECHANICS - BFC10403/1043 SEM.1
SESSION 2015/2016

Surface Tension and Capillary Effect- From text book FLUID MECHANICS (3rd
Edition in SI Units)-Fundamental and Applications- Yunus A.Cengal , John
M.Cimbala(2014)

2.91C What is surface tension? What is it cause? Why is the surface


tension also called surface energy?

2.92C A small diameter tube is inserted into a liquid whose contact


angle is 110o. Will the level of liquid in the tube be higher or
lower than the level of the rest of the liquid? Explain?

2.93C What is capillary effect? What is its cause? How is it affected by


the contact angle?

2.98 A 1.2 mm diameter tube is inserted into unknown liquid whose


density is 960 kg/m3 and it is observed that the liquid rises 5mm
in the tube, making a contact angle of 15o.Determine the surface
tension of the liquid.( Answer :0.0146N/m)

2.100 A 0.8 mm diameter glass tube is inserted into kerosene at


20oC.The contact angle of kerosene with a glass surface is
26o.Determine the capillary rise of kerosene in the tube.
(Answer : 16mm)

Submitted date: 22 October 2015 before 3.00pm at


my room.

Section- 1
T1- Prepared by : NOOR ALIZA AHMAD

You might also like