PHP My Admin

phpMyAdmin Documentation
Release 4.8.0-dev
The phpMyAdmin devel team
Mar 16, 2017

Contents
1 Introduction 3
1.1 Supported features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Shortcut keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 A word about users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 Requirements 5
2.1 Web server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 PHP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.3 Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.4 Web browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Installation 7
3.1 Linux distributions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.2 Installing on Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.3 Installing from Git . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.4 Installing using Composer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.5 Installing using Docker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.6 Quick Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.7 Verifying phpMyAdmin releases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.8 phpMyAdmin configuration storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.9 Upgrading from an older version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.10 Using authentication modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.11 Securing your phpMyAdmin installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3.12 Known issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4 Configuration 27
4.1 Basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.2 Server connection settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4.3 Generic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
4.4 Cookie authentication options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
4.5 Navigation panel setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4.6 Main panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
4.7 Database structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
4.8 Browse mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
4.9 Editing mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
4.10 Export and import settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
4.11 Tabs display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
i
4.12 PDF Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
4.13 Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
4.14 Web server settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
4.15 Theme settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
4.16 Design customization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
4.17 Text fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
4.18 SQL query box settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
4.19 Web server upload/save/import directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
4.20 Various display setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
4.21 Page titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
4.22 Theme manager settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
4.23 Default queries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
4.24 MySQL settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
4.25 Developer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
4.26 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
5 User Guide 81
5.1 Transformations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
5.2 Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
5.3 User management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
5.4 Relations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
5.5 Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
5.6 Import and export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
5.7 Other sources of information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
6 FAQ - Frequently Asked Questions 101

6.1 Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
6.2 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
6.3 Known limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
6.4 ISPs, multi-user installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
6.5 Browsers or client OS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
6.6 Using phpMyAdmin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
6.7 phpMyAdmin project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
6.8 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
6.9 Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
7 Developers Information 133
8 Distributing and packaging phpMyAdmin 135

8.1 External libraries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
9 Copyright 137
9.1 Third party licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
10 Credits 139
10.1 Credits, in chronological order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
10.2 Translators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
10.3 Documentation translators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
10.4 Original Credits of Version 2.1.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
11 Glossary 157
12 Indices and tables 165
ii
phpMyAdmin Documentation, Release 4.8.0-dev
Contents:
Contents 1
2 Contents
CHAPTER 1
Introduction
phpMyAdmin can manage a whole MySQL server (needs a super-user) as well as a single database. To accomplish
the latter youll need a properly set up MySQL user who can read/write only the desired database. Its up to you to
look up the appropriate part in the MySQL manual.
Supported features
Currently phpMyAdmin can:

browse and drop databases, tables, views, columns and indexes
display multiple results sets through stored procedures or queries
create, copy, drop, rename and alter databases, tables, columns and indexes
maintenance server, databases and tables, with proposals on server configuration
execute, edit and bookmark any SQL-statement, even batch-queries
load text files into tables
create1 and read dumps of tables
export1 data to various formats: CSV, XML, PDF, ISO/IEC 26300 - OpenDocument Text and Spreadsheet,
Microsoft Word 2000, and LATEX formats
import data and MySQL structures from OpenDocument spreadsheets, as well as XML, CSV, and SQL files
administer multiple servers
manage MySQL users and privileges
check referential integrity in MyISAM tables
using Query-by-example (QBE), create complex queries automatically connecting required tables
1 phpMyAdmin can compress (Zip, GZip or RFC 1952 formats) dumps and CSV exports if you use PHP with Zlib support (--with-zlib).
Proper support may also need changes in php.ini.
3
create PDF graphics of your database layout

search globally in a database or a subset of it
transform stored data into any format using a set of predefined functions, like displaying BLOB-data as image
or download-link
track changes on databases, tables and views
support InnoDB tables and foreign keys
support mysqli, the improved MySQL extension see 1.17 Which Database versions does phpMyAdmin support?
create, edit, call, export and drop stored procedures and functions
create, edit, export and drop events and triggers
communicate in 80 different languages
Shortcut keys
Currently phpMyAdmin supports following shortcuts:

k - Toggle console
h - Go to home page
s - Open settings
d + s - Go to database structure (Provided you are in database related page)
d + f - Search database (Provided you are in database related page)
t + s - Go to table structure (Provided you are in table related page)
t + f - Search table (Provided you are in table related page)
backspace - Takes you to older page.
A word about users
Many people have difficulty understanding the concept of user management with regards to phpMyAdmin. When
a user logs in to phpMyAdmin, that username and password are passed directly to MySQL. phpMyAdmin does no
account management on its own (other than allowing one to manipulate the MySQL user account information); all
users must be valid MySQL users.
4 Chapter 1. Introduction
CHAPTER 2
Requirements
Web server
Since phpMyAdmins interface is based entirely in your browser, youll need a web server (such as Apache, nginx,
IIS) to install phpMyAdmins files into.
PHP
You need PHP 5.5.0 or newer, with session support, the Standard PHP Library (SPL) extension, JSON
support, and the mbstring extension (see mbstring).
To support uploading of ZIP files, you need the PHP zip extension.
You need GD2 support in PHP to display inline thumbnails of JPEGs (image/jpeg: inline) with their original
aspect ratio.
When using the cookie authentication (the default), the openssl extension is strongly suggested.
To support upload progress bars, see 2.9 Seeing an upload progress bar.
To support XML and Open Document Spreadsheet importing, you need the libxml extension.
To support reCAPTCHA on the login page, you need the openssl extension.
To support displaying phpMyAdmins latest version, you need to enable allow_url_open in your php.ini
or to have the curl extension.
See also:
1.31 Which PHP versions does phpMyAdmin support?, Using authentication modes
5
Database
phpMyAdmin supports MySQL-compatible databases.

MySQL 5.5 or newer
MariaDB 5.5 or newer
See also:
1.17 Which Database versions does phpMyAdmin support?
Web browser
To access phpMyAdmin you need a web browser with cookies and JavaScript enabled.
You need browser which is supported by jQuery 2.0, see <https://jquery.com/browser-support/>.
6 Chapter 2. Requirements
CHAPTER 3
Installation
phpMyAdmin does not apply any special security methods to the MySQL database server. It is still the system
administrators job to grant permissions on the MySQL databases properly. phpMyAdmins Users page can be used
for this.
Warning: Mac users should note that if you are on a version before Mac OS X, StuffIt unstuffs with Mac formats.
So youll have to resave as in BBEdit to Unix style ALL phpMyAdmin scripts before uploading them to your
server, as PHP seems not to like Mac-style end of lines character (\r).
Linux distributions
phpMyAdmin is included in most Linux distributions. It is recommended to use distribution packages when possible
- they usually provide integration to your distribution and you will automatically get security updates from your
distribution.
Debian
Debians package repositories include a phpMyAdmin package, but be aware that the configuration file is maintained
in /etc/phpmyadmin and may differ in some ways from the official phpMyAdmin documentation. Specifically it
does:
Configuration of web server (works for Apache and lighttpd).
Creating of phpMyAdmin configuration storage using dbconfig-common.
Securing setup script, see Setup script on Debian, Ubuntu and derivatives.
See also:
More information can be found in README.Debian (it is installed as /usr/share/doc/phmyadmin/README.
Debian with the package).
7
OpenSUSE
OpenSUSE already comes with phpMyAdmin package, just install packages from the openSUSE Build Service.
Ubuntu
Ubuntu ships phpMyAdmin package, however if you want to use recent version, you can use packages from php-
MyAdmin PPA.
See also:
The packages are same as in Debian please check the documentation there for more details.
Gentoo
Gentoo ships the phpMyAdmin package, both in a near stock configuration as well as in a webapp-config config-
uration. Use emerge dev-db/phpmyadmin to install.
Mandriva
Mandriva ships the phpMyAdmin package in their contrib branch and can be installed via the usual Control Center.
Fedora
Fedora ships the phpMyAdmin package, but be aware that the configuration file is maintained in /etc/
phpMyAdmin/ and may differ in some ways from the official phpMyAdmin documentation.
Red Hat Enterprise Linux
Red Hat Enterprise Linux itself and thus derivatives like CentOS dont ship phpMyAdmin, but the Fedora-driven
repository Extra Packages for Enterprise Linux (EPEL) is doing so, if its enabled. But be aware that the config-
uration file is maintained in /etc/phpMyAdmin/ and may differ in some ways from the official phpMyAdmin
documentation.
Installing on Windows
The easiest way to get phpMyAdmin on Windows is using third party products which include phpMyAdmin together
with a database and web server such as XAMPP.
You can find more of such options at Wikipedia.
Installing from Git
You can clone current phpMyAdmin source from https://github.com/phpmyadmin/phpmyadmin.git:
git clone https://github.com/phpmyadmin/phpmyadmin.git
Additionally you need to install dependencies using Composer tool:
8 Chapter 3. Installation
composer update
If you do not intend to develop, you can skip installation of developer tools by invoking:
composer update --no-dev
Installing using Composer
You can install phpMyAdmin using Composer tool, however its currently not available in the default Packagist repos-
itory due to its technical limitations.
The installation is possible by adding our own repository <https://www.phpmyadmin.net/packages.json>:
composer create-project phpmyadmin/phpmyadmin --repository-url=https://www.phpmyadmin.

net/packages.json --no-dev
Installing using Docker
phpMyAdmin comes with a Docker image, which you can easily deploy. You can download it using:
docker pull phpmyadmin/phpmyadmin
The phpMyAdmin server will be executed on port 80. It supports several ways of configuring the link to the database
server, either by Dockers link feature by linking your database container to db for phpMyAdmin (by specifying
--link your_db_host:db) or by environment variables (in this case its up to you to setup networking in Docker
to allow phpMyAdmin container to access the database container over network).
Docker environment variables
You can configure several phpMyAdmin features using environment variables:

PMA_ARBITRARY
Allows you to enter database server hostname on login form.
See also:
$cfg['AllowArbitraryServer']
PMA_HOST
Host name or IP address of the database server to use.
See also:
$cfg['Servers'][$i]['host']
PMA_HOSTS
Comma separated host names or IP addresses of the database servers to use.
Note: Used only if PMA_HOST is empty.
3.4. Installing using Composer 9

PMA_VERBOSE
Verbose name the database server.
See also:
$cfg['Servers'][$i]['verbose']
PMA_VERBOSES
Comma separated verbose name the database servers.
Note: Used only if PMA_VERBOSE is empty.
PMA_USER
User name to use for Config authentication mode.
PMA_PASSWORD
Password to use for Config authentication mode.
PMA_PORT
Port of the databse server to use.
PMA_ABSOLUTE_URI
The fully-qualified path (https://pma.example.net/) where the reverse proxy makes phpMyAdmin
available.
See also:
$cfg['PmaAbsoluteUri']
By default, Cookie authentication mode is used, but if PMA_USER and PMA_PASSWORD are set, it is switched to
Config authentication mode.
Note: The credentials you need to login are stored in the MySQL server, in case of Docker image there are various
ways to set it (for example MYSQL_ROOT_PASSWORD when starting MySQL container). Please check documentation
for MariaDB container or MySQL container.
Customizing configuration
Additionally configuration can be tweaked by /etc/phpmyadmin/config.user.inc.php. If this file

exists, it will be loaded after configuration generated from above environment variables, so you can over-
ride any configuration variable. This configuraiton can be added as a volume when invoking docker using -v
/some/local/directory/config.user.inc.php:/etc/phpmyadmin/config.user.inc.php parameters.
Note that the supplied configuration file is applied after Docker environment variables, but you can override any of the
values.
For example to change default behaviour of CSV export you can use following configuration file:
<?php
$cfg['Export']['csv_columns'] = true;
See also:
See Configuration for detailed description of configuration options.
Docker Volumes
You can use following volumes to customise image behavior:

/etc/phpmyadmin/config.user.inc.php
Can be used for additional settings, see previous chapter for more details.
/sessions/
Directory where PHP sessions are stored. You might want to share this for example when uswing Signon
authentication mode.
Docker Examples
To connect phpMyAdmin to given server use:
docker run --name myadmin -d -e PMA_HOST=dbhost -p 8080:80 phpmyadmin/phpmyadmin
To connect phpMyAdmin to more servers use:
docker run --name myadmin -d -e PMA_HOSTS=dbhost1,dbhost2,dbhost3 -p 8080:80

phpmyadmin/phpmyadmin
To use arbitrary server option:
docker run --name myadmin -d --link mysql_db_server:db -p 8080:80 -e PMA_ARBITRARY=1

phpmyadmin/phpmyadmin
You can also link the database container using Docker:
docker run --name phpmyadmin -d --link mysql_db_server:db -p 8080:80 phpmyadmin/

phpmyadmin
Running with additional configuration:
docker run --name phpmyadmin -d --link mysql_db_server:db -p 8080:80 -v /some/local/

directory/config.user.inc.php:/etc/phpmyadmin/config.user.inc.php phpmyadmin/
phpmyadmin
Using docker-compose
Alternatively you can also use docker-compose with the docker-compose.yml from <https://github.com/phpmyadmin/
docker>. This will run phpMyAdmin with arbitrary server - allowing you to specify MySQL/MariaDB server on login
page.
docker-compose up -d
Customizing configuration file using docker-compose
You can use external file to customize phpMyAdmin configuration and pass it using volumes directive:
3.5. Installing using Docker 11

phpmyadmin:
image: phpmyadmin/phpmyadmin
container_name: phpmyadmin
environment:
- PMA_ARBITRARY=1
restart: always
ports:
- 8080:80
volumes:
- /sessions
- ~/docker/phpmyadmin/config.user.inc.php:/etc/phpmyadmin/config.user.inc.php
See also:
Customizing configuration
Running behind haproxy in a subdirectory
When you want to expose phpMyAdmin running in a Docker container in a subdirectory, you need to rewrite the
request path in the server proxying the requests. For example using haproxy it can be done as:
frontend http
bind *:80
option forwardfor
option http-server-close
### NETWORK restriction

acl LOCALNET src 10.0.0.0/8 192.168.0.0/16 172.16.0.0/12
# /phpmyadmin
acl phpmyadmin path_dir /phpmyadmin
use_backend phpmyadmin if phpmyadmin LOCALNET
backend phpmyadmin
mode http
reqirep ^(GET|POST|HEAD)\ /phpmyadmin/(.*) \1\ /\2
# phpMyAdmin container IP
server localhost 172.30.21.21:80
You then should specify PMA_ABSOLUTE_URI in the docker-compose configuration:

version: '2'
services:
phpmyadmin:
restart: always
image: phpmyadmin/phpmyadmin
container_name: phpmyadmin
hostname: phpmyadmin
domainname: example.com
ports:
- 8000:80
environment:
- PMA_HOSTS=172.26.36.7,172.26.36.8,172.26.36.9,172.26.36.10
- PMA_VERBOSES=production-db1,production-db2,dev-db1,dev-db2
- PMA_USER=root
- PMA_PASSWORD=
- PMA_ABSOLUTE_URI=http://example.com/phpmyadmin/
Quick Install
1. Choose an appropriate distribution kit from the phpmyadmin.net Downloads page. Some kits contain only
the English messages, others contain all languages. Well assume you chose a kit whose name looks like
phpMyAdmin-x.x.x -all-languages.tar.gz.
2. Ensure you have downloaded a genuine archive, see Verifying phpMyAdmin releases.
3. Untar or unzip the distribution (be sure to unzip the subdirectories): tar -xzvf phpMyAdmin_x.x.
x-all-languages.tar.gz in your webservers document root. If you dont have direct access to your
document root, put the files in a directory on your local machine, and, after step 4, transfer the directory on your
web server using, for example, ftp.
4. Ensure that all the scripts have the appropriate owner (if PHP is running in safe mode, having some scripts with
an owner different from the owner of other scripts will be a problem). See 4.2 Whats the preferred way of
making phpMyAdmin secure against evil access? and 1.26 I just installed phpMyAdmin in my document root of
IIS but I get the error No input file specified when trying to run phpMyAdmin. for suggestions.
5. Now you must configure your installation. There are two methods that can be used. Traditionally, users have
hand-edited a copy of config.inc.php, but now a wizard-style setup script is provided for those who prefer
a graphical installation. Creating a config.inc.php is still a quick way to get started and needed for some
advanced features.
Manually creating the file
To manually create the file, simply use your text editor to create the file config.inc.php (you can copy config.
sample.inc.php to get a minimal configuration file) in the main (top-level) phpMyAdmin directory (the one that
contains index.php). phpMyAdmin first loads libraries/config.default.php and then overrides those
values with anything found in config.inc.php. If the default value is okay for a particular setting, there is no need
to include it in config.inc.php. Youll probably need only a few directives to get going; a simple configuration
may look like this:
<?php
// use here a value of your choice at least 32 chars long
$cfg['blowfish_secret'] = '1{dd0`<Q),5XP_:R9UK%%8\"EEcyH#{o';
$i=0;
$i++;
$cfg['Servers'][$i]['auth_type'] = 'cookie';
// if you insist on "root" having no password:
// $cfg['Servers'][$i]['AllowNoPasswordRoot'] = true; `
?>
Or, if you prefer to not be prompted every time you log in:
<?php
$i=0;
$i++;
$cfg['Servers'][$i]['user'] = 'root';
3.6. Quick Install 13

$cfg['Servers'][$i]['password'] = 'cbb74bc'; // use here your password

$cfg['Servers'][$i]['auth_type'] = 'config';
?>
Warning: Storing passwords in the configuration is insecure as anybody can then manipulate with your database.
For a full explanation of possible configuration values, see the Configuration of this document.
Using Setup script
Instead of manually editing config.inc.php, you can use phpMyAdmins setup feature. The file can be generated
using the setup and you can download it for upload to the server.
Next, open your browser and visit the location where you installed phpMyAdmin, with the /setup suffix. The
changes are not saved to the server, you need to use the Download button to save them to your computer and then
upload to the server.
Now the file is ready to be used. You can choose to review or edit the file with your favorite editor, if you prefer to set
some advanced options which the setup script does not provide.
1. If you are using the auth_type config, it is suggested that you protect the phpMyAdmin installation direc-
tory because using config does not require a user to enter a password to access the phpMyAdmin installation.
Use of an alternate authentication method is recommended, for example with HTTPAUTH in a .htaccess file
or switch to using auth_type cookie or http. See the ISPs, multi-user installations for additional information,
especially 4.4 phpMyAdmin always gives Access denied when using HTTP authentication..
2. Open the main phpMyAdmin directory in your browser. phpMyAdmin should now display a welcome screen
and your databases, or a login dialog if using HTTP or cookie authentication mode.
Setup script on Debian, Ubuntu and derivatives
Debian and Ubuntu have changed way how setup is enabled and disabled, in a way that single command has to be
executed for either of these.
To allow editing configuration invoke:
/usr/sbin/pma-configure
To block editing configuration invoke:
/usr/sbin/pma-secure
Setup script on openSUSE
Some openSUSE releases do not include setup script in the package. In case you want to generate configuration on
these you can either download original package from <https://www.phpmyadmin.net/> or use setup script on our demo
server: <https://demo.phpmyadmin.net/STABLE/setup/>.
Verifying phpMyAdmin releases
Since July 2015 all phpMyAdmin releases are cryptographically signed by the releasing developer, who through
January 2016 was Marc Delisle. His key id is 0xFEFC65D181AF644A, his PGP fingerprint is:
436F F188 4B1A 0C3F DCBF 0D79 FEFC 65D1 81AF 644A
and you can get more identification information from <https://keybase.io/lem9>.

Beginning in January 2016, the release manager is Isaac Bennetch. His key id is 0xCE752F178259BD92, and his PGP
fingerprint is:
3D06 A59E CE73 0EB7 1B51 1C17 CE75 2F17 8259 BD92
and you can get more identification information from <https://keybase.io/ibennetch>.

r.
Some additional downloads (for example themes) might be signed by Michal Ciha His key id is
0x9C27B31342B7511D, and his PGP fingerprint is:
63CB 1DF1 EF12 CF2A C0EE 5A32 9C27 B313 42B7 511D
and you can get more identification information from <https://keybase.io/nijel>.

You should verify that the signature matches the archive you have downloaded. This way you can be sure that you
are using the same code that was released. You should also verify the date of the signature to make sure that you
downloaded the latest version.
Each archive is accompanied with .asc files which contains the PGP signature for it. Once you have both of them in
the same folder, you can verify the signature:
$ gpg --verify phpMyAdmin-4.5.4.1-all-languages.zip.asc
gpg: Signature made Fri 29 Jan 2016 08:59:37 AM EST using RSA key ID 8259BD92
gpg: Can't check signature: public key not found
As you can see gpg complains that it does not know the public key. At this point you should do one of the following
steps:
Download the keyring from our download server, then import it with:
$ gpg --import phpmyadmin.keyring
Download and import the key from one of the key servers:
$ gpg --keyserver hkp://pgp.mit.edu --recv-keys
3D06A59ECE730EB71B511C17CE752F178259BD92
gpg: requesting key 8259BD92 from hkp server pgp.mit.edu

gpg: key 8259BD92: public key "Isaac Bennetch <[email protected]>" imported
gpg: no ultimately trusted keys found
gpg: Total number processed: 1
gpg: imported: 1 (RSA: 1)
This will improve the situation a bit - at this point you can verify that the signature from the given key is correct but
you still can not trust the name used in the key:
gpg: Good signature from "Isaac Bennetch <[email protected]>"
gpg: aka "Isaac Bennetch <[email protected]>"
gpg: WARNING: This key is not certified with a trusted signature!
3.7. Verifying phpMyAdmin releases 15

gpg: There is no indication that the signature belongs to the owner.

Primary key fingerprint: 3D06 A59E CE73 0EB7 1B51 1C17 CE75 2F17 8259 BD92
The problem here is that anybody could issue the key with this name. You need to ensure that the key is actually
owned by the mentioned person. The GNU Privacy Handbook covers this topic in the chapter Validating other keys
on your public keyring. The most reliable method is to meet the developer in person and exchange key fingerprints,
however you can also rely on the web of trust. This way you can trust the key transitively though signatures of others,
who have met the developer in person. For example you can see how Isaacs key links to Linuss key.
Once the key is trusted, the warning will not occur:

gpg: Good signature from "Isaac Bennetch <[email protected]>" [full]
Should the signature be invalid (the archive has been changed), you would get a clear error regardless of the fact that
the key is trusted or not:

gpg: BAD signature from "Isaac Bennetch <[email protected]>" [unknown]
phpMyAdmin configuration storage
Changed in version 3.4.0: Prior to phpMyAdmin 3.4.0 this was called Linked Tables Infrastructure, but the name was
changed due to extended scope of the storage.
For a whole set of additional features (Bookmarks, comments, SQL-history, tracking mechanism, PDF-generation,
Transformations, Relations etc.) you need to create a set of special tables. Those tables can be located in your own
database, or in a central database for a multi-user installation (this database would then be accessed by the controluser,
so no other user should have rights to it).
Zero configuration
In many cases, this database structure can be automatically created and configured. This is called Zero Configuration
mode and can be particularly useful in shared hosting situations. Zeroconf mode is on by default, to disable set
$cfg['ZeroConf'] to false.
The following three scenarios are covered by the Zero Configuration mode:
When entering a database where the configuration storage tables are not present, phpMyAdmin offers to create
them from the Operations tab.
When entering a database where the tables do already exist, the software automatically detects this and begins
using them. This is the most common situation; after the tables are initially created automatically they are
continually used without disturbing the user; this is also most useful on shared hosting where the user is not able
to edit config.inc.php and usually the user only has access to one database.
When having access to multiple databases, if the user first enters the database containing the configuration stor-
age tables then switches to another database, phpMyAdmin continues to use the tables from the first database;
the user is not prompted to create more tables in the new database.
Manual configuration
Please look at your ./sql/ directory, where you should find a file called create_tables.sql. (If you are using a
Windows server, pay special attention to 1.23 Im running MySQL on a Win32 machine. Each time I create a new
table the table and column names are changed to lowercase!).
If you already had this infrastructure and:
upgraded to MySQL 4.1.2 or newer, please use sql/upgrade_tables_mysql_4_1_2+.sql.
upgraded to phpMyAdmin 4.3.0 or newer from 2.5.0 or newer (<= 4.2.x), please use sql/
upgrade_column_info_4_3_0+.sql.
upgraded to phpMyAdmin 4.7.0 or newer from 4.3.0 or newer, please use sql/
upgrade_tables_4_7_0+.sql.
and then create new tables by importing sql/create_tables.sql.
You can use your phpMyAdmin to create the tables for you. Please be aware that you may need special (administrator)
privileges to create the database and tables, and that the script may need some tuning, depending on the database name.
After having imported the sql/create_tables.sql file, you should specify the table names in your config.
inc.php file. The directives used for that can be found in the Configuration.
You will also need to have a controluser ($cfg['Servers'][$i]['controluser'] and
$cfg['Servers'][$i]['controlpass'] settings) with the proper rights to those tables. For example
you can create it using following statement:
GRANT SELECT, INSERT, UPDATE, DELETE ON <pma_db>.* TO 'pma'@'localhost' IDENTIFIED

BY 'pmapass';
Upgrading from an older version
Warning: Never extract the new version over an existing installation of phpMyAdmin, always first remove the
old files keeping just the configuration.
This way you will not leave old no longer working code in the directory, which can have severe security implica-
tions or can cause various breakages.
Simply copy config.inc.php from your previous installation into the newly unpacked one. Configuration files
from old versions may require some tweaking as some options have been changed or removed. For compatibility with
PHP 5.3 and later, remove a set_magic_quotes_runtime(0); statement that you might find near the end of
your configuration file.
You should not copy libraries/config.default.php over config.inc.php because the default config-
uration file is version- specific.
The complete upgrade can be performed in few simple steps:
1. Download the latest phpMyAdmin version from <https://www.phpmyadmin.net/downloads/>.
2. Rename existing phpMyAdmin folder (for example to phpmyadmin-old).
3. Unpack freshly donwloaded phpMyAdmin to desired location (for example phpmyadmin).
4. Copy config.inc.php` from old location (phpmyadmin-old) to new one (phpmyadmin).
5. Test that everything works properly.
3.9. Upgrading from an older version 17

6. Remove backup of previous version (phpmyadmin-old).

If you have upgraded your MySQL server from a version previous to 4.1.2 to version 5.x or newer
and if you use the phpMyAdmin configuration storage, you should run the SQL script found in sql/
upgrade_tables_mysql_4_1_2+.sql.
If you have upgraded your phpMyAdmin to 4.3.0 or newer from 2.5.0 or newer (<= 4.2.x) and if you use the phpMyAd-
min configuration storage, you should run the SQL script found in sql/upgrade_column_info_4_3_0+.sql.
Do not forget to clear the browser cache and to empty the old session by logging out and logging in again.
Using authentication modes
HTTP and cookie authentication modes are recommended in a multi-user environment where you want to give users
access to their own database and dont want them to play around with others. Nevertheless be aware that MS Internet
Explorer seems to be really buggy about cookies, at least till version 6. Even in a single-user environment, you might
prefer to use HTTP or cookie mode so that your user/password pair are not in clear in the configuration file.
HTTP and cookie authentication modes are more secure: the MySQL login information does not need to be set
in the phpMyAdmin configuration file (except possibly for the $cfg['Servers'][$i]['controluser']).
However, keep in mind that the password travels in plain text, unless you are using the HTTPS protocol. In cookie
mode, the password is stored, encrypted with the AES algorithm, in a temporary cookie.
Then each of the true users should be granted a set of privileges on a set of particular databases. Normally you
shouldnt give global privileges to an ordinary user, unless you understand the impact of those privileges (for example,
you are creating a superuser). For example, to grant the user real_user with all privileges on the database user_base:
GRANT ALL PRIVILEGES ON user_base.* TO 'real_user'@localhost IDENTIFIED BY 'real_

password';
What the user may now do is controlled entirely by the MySQL user management system. With HTTP or cookie
authentication mode, you dont need to fill the user/password fields inside the $cfg['Servers'].
See also:
1.32 Can I use HTTP authentication with IIS?, 1.35 Can I use HTTP authentication with Apache CGI?, 4.1 Im an ISP.
Can I setup one central copy of phpMyAdmin or do I need to install it for each customer?, 4.2 Whats the preferred
way of making phpMyAdmin secure against evil access?, 4.3 I get errors about not being able to include a file in /lang
or in /libraries.
HTTP authentication mode
Uses HTTP Basic authentication method and allows you to log in as any valid MySQL user.
Is supported with most PHP configurations. For IIS (ISAPI) support using CGI PHP see 1.32 Can I use HTTP
authentication with IIS?, for using with Apache CGI see 1.35 Can I use HTTP authentication with Apache
CGI?.
When PHP is running under Apaches mod_proxy_fcgi (e.g. with PHP-FPM), Authorization headers are
not passed to the underlying FCGI application, such that your credentials will not reach the application. In this
case, you can add the following configuration directive:
SetEnvIf Authorization "(.*)" HTTP_AUTHORIZATION=$1
See also 4.4 phpMyAdmin always gives Access denied when using HTTP authentication. about not using the
.htaccess mechanism along with HTTP authentication mode.
Note: There is no way to do proper logout in HTTP authentication, most browsers will remember credentials until
there is no different successful authentication. Because of this this method has limitation that you can not login with
same user after logout.
Cookie authentication mode
Username and password are stored in cookies during the session and password is deleted when it ends.
With this mode, the user can truly log out of phpMyAdmin and log back in with the same username (this is not
possible with HTTP authentication mode).
If you want to allow users to enter any hostname to connect (rather than only servers that are configured in
config.inc.php), see the $cfg['AllowArbitraryServer'] directive.
As mentioned in the Requirements section, having the openssl extension will speed up access considerably,
but is not required.
Signon authentication mode
This mode is a convenient way of using credentials from another application to authenticate to phpMyAdmin to
implement single signon solution.
The other application has to store login information into session data (see
$cfg['Servers'][$i]['SignonSession'] and $cfg['Servers'][$i]['SignonCookieParams'])
or you need to implement script to return the credentials (see $cfg['Servers'][$i]['SignonScript']).
When no credentials are available, the user is being redirected to
$cfg['Servers'][$i]['SignonURL'], where you should handle the login process.
The very basic example of saving credentials in a session is available as examples/signon.php:
<?php
/* vim: set expandtab sw=4 ts=4 sts=4: */
/**
* Single signon for phpMyAdmin
*
* This is just example how to use session based single signon with
* phpMyAdmin, it is not intended to be perfect code and look, only
* shows how you can integrate this functionality in your application.
*
* @package PhpMyAdmin
* @subpackage Example
*/
/* Need to have cookie visible from parent directory */

session_set_cookie_params(0, '/', '', true, true);
/* Create signon session */
$session_name = 'SignonSession';
session_name($session_name);
// Uncomment and change the following line to match your $cfg['SessionSavePath']
//session_save_path('/foobar');
@session_start();
/* Was data posted? */

if (isset($_POST['user'])) {
3.10. Using authentication modes 19

/* Store there credentials */

$_SESSION['PMA_single_signon_user'] = $_POST['user'];
$_SESSION['PMA_single_signon_password'] = $_POST['password'];
$_SESSION['PMA_single_signon_host'] = $_POST['host'];
$_SESSION['PMA_single_signon_port'] = $_POST['port'];
/* Update another field of server configuration */
$_SESSION['PMA_single_signon_cfgupdate'] = array('verbose' => 'Signon test');
$id = session_id();
/* Close that session */
@session_write_close();
/* Redirect to phpMyAdmin (should use absolute URL here!) */
header('Location: ../index.php');
} else {
/* Show simple form */
header('Content-Type: text/html; charset=utf-8');
echo '<?xml version="1.0" encoding="utf-8"?>' , "\n";
?>
<!DOCTYPE HTML>
<html lang="en" dir="ltr">
<head>
<link rel="icon" href="../favicon.ico" type="image/x-icon" />
<link rel="shortcut icon" href="../favicon.ico" type="image/x-icon" />
<meta charset="utf-8" />
<title>phpMyAdmin single signon example</title>
</head>
<body>
<?php
if (isset($_SESSION['PMA_single_signon_error_message'])) {
echo '<p class="error">';
echo $_SESSION['PMA_single_signon_error_message'];
echo '</p>';
}
?>
<form action="signon.php" method="post">
Username: <input type="text" name="user" /><br />
Password: <input type="password" name="password" /><br />
Host: (will use the one from config.inc.php by default)
<input type="text" name="host" /><br />
Port: (will use the one from config.inc.php by default)
<input type="text" name="port" /><br />
<input type="submit" />
</form>
</body>
</html>
<?php
}
?>
Alternatively you can also use this way to integrate with OpenID as shown in examples/openid.php:
<?php
/**
* Single signon for phpMyAdmin using OpenID
*
* This is just example how to use single signon with phpMyAdmin, it is
* not intended to be perfect code and look, only shows how you can
* integrate this functionality in your application.
*
* It uses OpenID pear package, see https://pear.php.net/package/OpenID
*
* User first authenticates using OpenID and based on content of $AUTH_MAP
* the login information is passed to phpMyAdmin in session data.
*
*/
if (false === @include_once 'OpenID/RelyingParty.php') {

exit;
}
/**
* Map of authenticated users to MySQL user/password pairs.
*/
$AUTH_MAP = array(
'https://launchpad.net/~username' => array(
'user' => 'root',
'password' => '',
),
);
/**
* Simple function to show HTML page with given content.
*
* @param string $contents Content to include in page
*
* @return void
*/
function Show_page($contents)
{
header('Content-Type: text/html; charset=utf-8');
echo '<?xml version="1.0" encoding="utf-8"?>' , "\n";
?>
<!DOCTYPE HTML>
<html lang="en" dir="ltr">
<head>
<link rel="icon" href="../favicon.ico" type="image/x-icon" />
<link rel="shortcut icon" href="../favicon.ico" type="image/x-icon" />
<meta charset="utf-8" />
<title>phpMyAdmin OpenID signon example</title>
</head>
<body>
<?php
if (isset($_SESSION) && isset($_SESSION['PMA_single_signon_error_message'])) {
echo '<p class="error">' , $_SESSION['PMA_single_signon_message'] , '</p>';
unset($_SESSION['PMA_single_signon_message']);
}
echo $contents;
?>
</body>
</html>
<?php
}
function Die_error($e)

{
$contents = "<div class='relyingparty_results'>\n";
$contents .= "<pre>" . htmlspecialchars($e->getMessage()) . "</pre>\n";
$contents .= "</div class='relyingparty_results'>";
Show_page($contents);
exit;
}
/* Need to have cookie visible from parent directory */

session_set_cookie_params(0, '/', '', true, true);
/* Create signon session */
$session_name = 'SignonSession';
session_name($session_name);
@session_start();
// Determine realm and return_to

$base = 'http';
if (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') {
$base .= 's';
}
$base .= '://' . $_SERVER['SERVER_NAME'] . ':' . $_SERVER['SERVER_PORT'];
$realm = $base . '/';

$returnTo = $base . dirname($_SERVER['PHP_SELF']);
if ($returnTo[strlen($returnTo) - 1] != '/') {
$returnTo .= '/';
}
$returnTo .= 'openid.php';
/* Display form */
if (!count($_GET) && !count($_POST) || isset($_GET['phpMyAdmin'])) {
/* Show simple form */
$content = '<form action="openid.php" method="post">
OpenID: <input type="text" name="identifier" /><br />
<input type="submit" name="start" />
</form>
</body>
</html>';
Show_page($content);
exit;
}
/* Grab identifier */
if (isset($_POST['identifier']) && is_string($_POST['identifier'])) {
$identifier = $_POST['identifier'];
} else if (isset($_SESSION['identifier']) && is_string($_SESSION['identifier'])) {
$identifier = $_SESSION['identifier'];
} else {
$identifier = null;
}
/* Create OpenID object */

try {
$o = new OpenID_RelyingParty($returnTo, $realm, $identifier);
} catch (Exception $e) {
Die_error($e);
}
/* Redirect to OpenID provider */

if (isset($_POST['start'])) {
try {
$authRequest = $o->prepare();
Die_error($e);
}
$url = $authRequest->getAuthorizeURL();
header("Location: $url");
exit;
} else {
/* Grab query string */
if (!count($_POST)) {
list(, $queryString) = explode('?', $_SERVER['REQUEST_URI']);
} else {
// I hate php sometimes
$queryString = file_get_contents('php://input');
}
/* Check reply */
try {
$message = new OpenID_Message($queryString, OpenID_Message::FORMAT_HTTP);
Die_error($e);
}
$id = $message->get('openid.claimed_id');
if (!empty($id) && isset($AUTH_MAP[$id])) {

$_SESSION['PMA_single_signon_user'] = $AUTH_MAP[$id]['user'];
$_SESSION['PMA_single_signon_password'] = $AUTH_MAP[$id]['password'];
session_write_close();
/* Redirect to phpMyAdmin (should use absolute URL here!) */
header('Location: ../index.php');
} else {
Show_page('<p>User not allowed!</p>');
exit;
}
}
If you intend to pass the credentials using some other means than, you have to implement wrapper in PHP to get that
data and set it to $cfg['Servers'][$i]['SignonScript']. There is very minimal example in examples/
signon-script.php:
<?php
/**
*
* This is just example how to use script based single signon with
*

*/
/**
* This function returns username and password.
*
* It can optionally use configured username as parameter.
*
* @param string $user User name
*
* @return array
*/
function get_login_credentials($user)
{
/* Optionally we can use passed username */
if (!empty($user)) {
return array($user, 'password');
}
/* Here we would retrieve the credentials */

$credentials = array('root', '');
return $credentials;
}
See also:
$cfg['Servers'][$i]['auth_type'], $cfg['Servers'][$i]['SignonSession'],
$cfg['Servers'][$i]['SignonCookieParams'], $cfg['Servers'][$i]['SignonScript'],
$cfg['Servers'][$i]['SignonURL'], Example for signon authentication
Config authentication mode
This mode is sometimes the less secure one because it requires you to fill the
$cfg['Servers'][$i]['user'] and $cfg['Servers'][$i]['password'] fields (and as
a result, anyone who can read your config.inc.php can discover your username and password).
In the ISPs, multi-user installations section, there is an entry explaining how to protect your configuration file.
For additional security in this mode, you may wish to consider the
Host authentication $cfg['Servers'][$i]['AllowDeny']['order'] and
$cfg['Servers'][$i]['AllowDeny']['rules'] configuration directives.
Unlike cookie and http, does not require a user to log in when first loading the phpMyAdmin site. This is
by design but could allow any user to access your installation. Use of some restriction method is suggested,
perhaps a .htaccess file with the HTTP-AUTH directive or disallowing incoming HTTP requests at ones router
or firewall will suffice (both of which are beyond the scope of this manual but easily searchable with Google).
Securing your phpMyAdmin installation
The phpMyAdmin team tries hard to make the application secure, however there are always ways to make your
installation more secure:
Follow our Security announcements and upgrade phpMyAdmin whenever new vulnerability is published.
Serve phpMyAdmin on HTTPS only. Preferably, you should use HSTS as well, so that youre protected from
protocol downgrade attacks.
Ensure your PHP setup follows recommendations for production sites, for example display_errors should be
disabled.
Remove the test directory from phpMyAdmin, unless you are developing and need test suite.
Remove the setup directory from phpMyAdmin, you will probably not use it after the initial setup.
Properly choose an authentication method - Cookie authentication mode is probably the best choice for shared
hosting.
Deny access to auxiliary files in ./libraries/ or ./templates/ subfolders in your webserver config-
uration. Such configuration prevents from possible path exposure and cross side scripting vulnerabilities that
might happen to be found in that code. For the Apache webserver, this is often accomplished with a .htaccess
file in those directories.
It is generally a good idea to protect a public phpMyAdmin installation against access by robots as they usually
can not do anything good there. You can do this using robots.txt file in root of your webserver or limit
access by web server configuration, see 1.42 How can I prevent robots from accessing phpMyAdmin?.
In case you dont want all MySQL users to be able to access phpMyAdmin, you
can use $cfg['Servers'][$i]['AllowDeny']['rules'] to limit them or
$cfg['Servers'][$i]['AllowRoot'] to deny root user access.
Consider hiding phpMyAdmin behind an authentication proxy, so that users need to authenticate prior to pro-
viding MySQL credentials to phpMyAdmin. You can achieve this by configuring your web server to request
HTTP authentication. For example in Apache this can be done with:
AuthType Basic
AuthName "Restricted Access"
AuthUserFile /usr/share/phpmyadmin/passwd
Require valid-user
Once you have changed the configuration, you need to create a list of users which can authenticate. This can be
done using the htpasswd utility:
htpasswd -c /usr/share/phpmyadmin/passwd username
If you are afraid of automated attacks, enabling Captcha by $cfg['CaptchaLoginPublicKey'] and

$cfg['CaptchaLoginPrivateKey'] might be an option.
Failed login attemps are logged to syslog (if available). This can allow using a tool such as fail2ban to block
brute-force attempts. Note that the log file used by syslog is not the same as the Apache error or access log files.
Known issues
Users with column-specific privileges are unable to Browse
If a user has only column-specific privileges on some (but not all) columns in a table, Browse will fail with an error
message.
As a workaround, a bookmarked query with the same name as the table can be created, this will run when using the
Browse link instead. Issue 11922.
3.12. Known issues 25

Trouble logging back in after logging out using http authentication
When using the http auth_type, it can be impossible to log back in (when the logout comes manually or after a
period of inactivity). Issue 11898.
CHAPTER 4
Configuration
All configurable data is placed in config.inc.php in phpMyAdmins toplevel directory. If this file does not
exist, please refer to the Installation section to create one. This file only needs to contain the parameters you want to
change from their corresponding default value in libraries/config.default.php (this file is not inteded for
changes).
See also:
Examples for examples of configurations
If a directive is missing from your file, you can just add another line with the file. This file is for over-writing the
defaults; if you wish to use the default value theres no need to add a line here.
The parameters which relate to design (like colors) are placed in themes/themename/layout.inc.php. You
might also want to create config.footer.inc.php and config.header.inc.php files to add your site
specific code to be included on start and end of each page.
Note: Some distributions (eg. Debian or Ubuntu) store config.inc.php in /etc/phpmyadmin instead of
within phpMyAdmin sources.
Warning: Mac users should note that if you are on a version before Mac OS X, PHP does not seem to like Mac
end of lines character (\r). So ensure you choose the option that allows to use the *nix end of line character (\n)
in your text editor before saving a script you have modified.
Basic settings
$cfg['PmaAbsoluteUri']
Type string
Default value ''
27
Changed in version 4.6.5: This setting was not available in phpMyAdmin 4.6.0 - 4.6.4.
Sets here the complete URL (with full path) to your phpMyAdmin installations directory. E.g. https://
www.example.net/path_to_your_phpMyAdmin_directory/. Note also that the URL on most of
web servers are case sensitive (even on Windows). Dont forget the trailing slash at the end.
Starting with version 2.3.0, it is advisable to try leaving this blank. In most cases phpMyAdmin automatically
detects the proper setting. Users of port forwarding or complex reverse proxy setup might need to set this.
A good test is to browse a table, edit a row and save it. There should be an error message if phpMyAdmin is
having trouble autodetecting the correct value. If you get an error that this must be set or if the autodetect code
fails to detect your path, please post a bug report on our bug tracker so we can improve the code.
See also:
1.40 When accessing phpMyAdmin via an Apache reverse proxy, cookie login does not work., 2.5 Each time I
want to insert or change a row or drop a database or a table, an error 404 (page not found) is displayed or,
with HTTP or cookie authentication, Im asked to log in again. Whats wrong?, 4.7 Authentication window is
displayed more than once, why?, 5.16 With Internet Explorer, I get Access is denied Javascript errors. Or I
cannot make phpMyAdmin work under Windows.
$cfg['PmaNoRelation_DisableWarning']
Type boolean
Default value false
Starting with version 2.3.0 phpMyAdmin offers a lot of features to work with master / foreign tables (see
$cfg['Servers'][$i]['pmadb']).
If you tried to set this up and it does not work for you, have a look on the Structure page of one database where
you would like to use it. You will find a link that will analyze why those features have been disabled.
If you do not want to use those features set this variable to true to stop this message from appearing.
$cfg['SuhosinDisableWarning']
Type boolean
Default value false
A warning is displayed on the main page if Suhosin is detected.
You can set this parameter to true to stop this message from appearing.
$cfg['LoginCookieValidityDisableWarning']
Type boolean
Default value false
A warning is displayed on the main page if the PHP parameter session.gc_maxlifetime is lower than cookie
validity configured in phpMyAdmin.
$cfg['ServerLibraryDifference_DisableWarning']
Type boolean
Default value false
Deprecated since version 4.7.0: This setting was removed as the warning has been removed as well.
A warning is displayed on the main page if there is a difference between the MySQL library and server version.
28 Chapter 4. Configuration
$cfg['ReservedWordDisableWarning']
Type boolean
Default value false
This warning is displayed on the Structure page of a table if one or more column names match with words which
are MySQL reserved.
If you want to turn off this warning, you can set it to true and warning will no longer be displayed.
$cfg['TranslationWarningThreshold']
Type integer
Default value 80
Show warning about incomplete translations on certain threshold.
$cfg['SendErrorReports']
Type string
Default value 'ask'
Sets the default behavior for JavaScript error reporting.
Whenever an error is detected in the JavaScript execution, an error report may be sent to the phpMyAdmin team
if the user agrees.
The default setting of 'ask' will ask the user everytime there is a new error report. However you can set this
parameter to 'always' to send error reports without asking for confirmation or you can set it to 'never' to
never send error reports.
This directive is available both in the configuration file and in users preferences. If the person in charge of
a multi-user installation prefers to disable this feature for all users, a value of 'never' should be set, and
the $cfg['UserprefsDisallow'] directive should contain 'SendErrorReports' in one of its array
values.
$cfg['ConsoleEnterExecutes']
Type boolean
Default value false
Setting this to true allows the user to execute queries by pressing Enter instead of Ctrl+Enter. A new line can
be inserted by pressing Shift + Enter.
The behaviour of the console can be temporarily changed using consoles settings interface.
$cfg['AllowThirdPartyFraming']
Type boolean
Default value false
Setting this to true allows phpMyAdmin to be included inside a frame, and is a potential security hole allowing
cross-frame scripting attacks or clickjacking.
Server connection settings
$cfg['Servers']
Type array
4.2. Server connection settings 29

Default value one server array with settings listed below

Since version 1.4.2, phpMyAdmin supports the administration of multiple MySQL servers. Therefore, a
$cfg['Servers']-array has been added which contains the login information for the different servers.
The first $cfg['Servers'][$i]['host'] contains the hostname of the first server, the second
$cfg['Servers'][$i]['host'] the hostname of the second server, etc. In libraries/config.
default.php, there is only one section for server definition, however you can put as many as you need in
config.inc.php, copy that block or needed parts (you dont have to define all settings, just those you need
to change).
Note: The $cfg['Servers'] array starts with $cfg[Servers][1]. Do not use $cfg[Servers][0]. If you
want more than one server, just copy following section (including $i incrementation) serveral times. There is no
need to define full server array, just define values you need to change.
$cfg['Servers'][$i]['host']
Type string
Default value 'localhost'
The hostname or IP address of your $i-th MySQL-server. E.g. localhost.
Possible values are:
hostname, e.g., 'localhost' or 'mydb.example.org'
IP address, e.g., '127.0.0.1' or '192.168.10.1'
IPv6 address, e.g. 2001:cdba:0000:0000:0000:0000:3257:9652
dot - '.', i.e., use named pipes on windows systems
empty - '', disables this server
Note: The hostname localhost is handled specially by MySQL and it uses the socket based connection
protocol. To use TCP/IP networking, use an IP address or hostname such as 127.0.0.1 or db.example.
com. You can configure the path to the socket with $cfg['Servers'][$i]['socket'].
See also:
$cfg['Servers'][$i]['port'], <https://dev.mysql.com/doc/refman/5.7/en/connecting.html>
$cfg['Servers'][$i]['port']
Type string
Default value ''
The port-number of your $i-th MySQL-server. Default is 3306 (leave blank).
Note: If you use localhost as the hostname, MySQL ignores this port number and connects with the
socket, so if you want to connect to a port different from the default port, use 127.0.0.1 or the real hostname
in $cfg['Servers'][$i]['host'].
See also:
$cfg['Servers'][$i]['host'], <https://dev.mysql.com/doc/refman/5.7/en/connecting.html>
$cfg['Servers'][$i]['socket']
Type string
Default value ''
The path to the socket to use. Leave blank for default. To determine the correct socket, check your MySQL
configuration or, using the mysql commandline client, issue the status command. Among the resulting
information displayed will be the socket used.
Note: This takes effect only if $cfg['Servers'][$i]['host'] is set to localhost.
See also:
$cfg['Servers'][$i]['host'], <https://dev.mysql.com/doc/refman/5.7/en/connecting.html>
$cfg['Servers'][$i]['ssl']
Type boolean
Default value false
Whether to enable SSL for the connection between phpMyAdmin and the MySQL server to secure the connec-
tion.
When using the 'mysql' extension, none of the remaining 'ssl...' configuration options apply.
We strongly recommend the 'mysqli' extension when using this option.
See also:
Google Cloud SQL with SSL $cfg['Servers'][$i]['ssl_key'],
$cfg['Servers'][$i]['ssl_cert'], $cfg['Servers'][$i]['ssl_ca'],
$cfg['Servers'][$i]['ssl_ca_path'], $cfg['Servers'][$i]['ssl_ciphers'],
$cfg['Servers'][$i]['ssl_verify']
$cfg['Servers'][$i]['ssl_key']
Type string
Default value NULL
Path to the key file when using SSL for connecting to the MySQL server.
For example:
$cfg['Servers'][$i]['ssl_key'] = '/etc/mysql/server-key.pem';
See also:
Google Cloud SQL with SSL $cfg['Servers'][$i]['ssl'], $cfg['Servers'][$i]['ssl_cert'],
$cfg['Servers'][$i]['ssl_ca'], $cfg['Servers'][$i]['ssl_ca_path'],
$cfg['Servers'][$i]['ssl_ciphers'], $cfg['Servers'][$i]['ssl_verify']
$cfg['Servers'][$i]['ssl_cert']
Type string
Default value NULL
Path to the cert file when using SSL for connecting to the MySQL server.
See also:
Google Cloud SQL with SSL $cfg['Servers'][$i]['ssl'], $cfg['Servers'][$i]['ssl_key'],
$cfg['Servers'][$i]['ssl_ca'], $cfg['Servers'][$i]['ssl_ca_path'],

$cfg['Servers'][$i]['ssl_ca']
Type string
Default value NULL
Path to the CA file when using SSL for connecting to the MySQL server.
See also:
$cfg['Servers'][$i]['ssl_cert'], $cfg['Servers'][$i]['ssl_ca_path'],
$cfg['Servers'][$i]['ssl_ca_path']
Type string
Default value NULL
Directory containing trusted SSL CA certificates in PEM format.
See also:
$cfg['Servers'][$i]['ssl_ciphers']
Type string
Default value NULL
List of allowable ciphers for SSL connections to the MySQL server.
See also:
$cfg['Servers'][$i]['ssl'], $cfg['Servers'][$i]['ssl_key'],
$cfg['Servers'][$i]['ssl_ca_path'], $cfg['Servers'][$i]['ssl_verify']
Type boolean
Default value true
New in version 4.6.0: This is supported since phpMyAdmin 4.6.0.
If your PHP install uses the MySQL Native Driver (mysqlnd), your MySQL server is 5.6 or later, and your SSL
certificate is self-signed, there is a chance your SSL connection will fail due to validation. Setting this to false
will disable the validation check.
Since PHP 5.6.0 it also verifies whether server name matches CN of its certificate. There is currently no way to
disable just this check without disabling complete SSL verification.
Warning: Disabling the certificate verification defeats purpose of using SSL. This will make the connection
vulnerable to man in the middle attacks.
Note: This flag only works with PHP 5.6.16 or later.
See also:

$cfg['Servers'][$i]['connect_type']
Type string
Default value 'tcp'
Deprecated since version 4.7.0: This setting is no longer used as of 4.7.0, since MySQL decides the connection
type based on host, so it could lead to unexpected results. Please set $cfg['Servers'][$i]['host']
accordingly instead.
What type connection to use with the MySQL server. Your options are 'socket' and 'tcp'. It defaults to
tcp as that is nearly guaranteed to be available on all MySQL servers, while sockets are not supported on some
platforms. To use the socket mode, your MySQL server must be on the same machine as the Web server.
$cfg['Servers'][$i]['compress']
Type boolean
Default value false
Whether to use a compressed protocol for the MySQL server connection or not (experimental).
$cfg['Servers'][$i]['controlhost']
Type string
Default value ''
Permits to use an alternate host to hold the configuration storage data.
See also:
$cfg['Servers'][$i]['control_*']
$cfg['Servers'][$i]['controlport']
Type string
Default value ''
Permits to use an alternate port to connect to the host that holds the configuration storage.
See also:
$cfg['Servers'][$i]['controluser']
Type string
Default value ''
$cfg['Servers'][$i]['controlpass']
Type string
Default value ''
This special account is used to access phpMyAdmin configuration storage. You dont need it in single user case,
but if phpMyAdmin is shared it is recommended to give access to phpMyAdmin configuration storage only to
this user and configure phpMyAdmin to use it. All users will then be able to use the features without need to
have direct access to phpMyAdmin configuration storage.

Changed in version 2.2.5: those were called stduser and stdpass

See also:
Installation, Using authentication modes, phpMyAdmin configuration storage,
$cfg['Servers'][$i]['pmadb'], $cfg['Servers'][$i]['controlhost'],
$cfg['Servers'][$i]['controlport'], $cfg['Servers'][$i]['control_*']
Type mixed
New in version 4.7.0.
You can change any MySQL connection setting for control link (used to access phpMyAdmin configuration
storage) using configuration prefixed with control_.
This can be used to change any aspect of the control connection, which by default uses same parameters as the
user one.
For example you can configure SSL for the control connection:
// Enable SSL
$cfg['Servers'][$i]['control_ssl'] = true;
// Client secret key
$cfg['Servers'][$i]['control_ssl_key'] = '../client-key.pem';
// Client certificate
$cfg['Servers'][$i]['control_ssl_cert'] = '../client-cert.pem';
// Server certification authority
$cfg['Servers'][$i]['control_ssl_ca'] = '../server-ca.pem';
See also:
$cfg['Servers'][$i]['auth_type']
Type string
Default value 'cookie'
Whether config or cookie or HTTP or signon authentication should be used for this server.
config authentication ($auth_type = 'config') is the plain old way: username and password are
stored in config.inc.php.
cookie authentication mode ($auth_type = 'cookie') allows you to log in as any valid MySQL
user with the help of cookies.
http authentication allows you to log in as any valid MySQL user via HTTP-Auth.
signon authentication mode ($auth_type = 'signon') allows you to log in from prepared PHP
session data or using supplied PHP script.
See also:
$cfg['Servers'][$i]['auth_http_realm']
Type string
Default value ''
When using auth_type = http, this field allows to define a custom HTTP Basic Auth Realm which will be
displayed to the user. If not explicitly specified in your configuration, a string combined of phpMyAdmin and
either $cfg['Servers'][$i]['verbose'] or $cfg['Servers'][$i]['host'] will be used.
$cfg['Servers'][$i]['user']
Type string
Default value 'root'
$cfg['Servers'][$i]['password']
Type string
Default value ''
When using $cfg['Servers'][$i]['auth_type'] set to config, this is the user/password-pair which
phpMyAdmin will use to connect to the MySQL server. This user/password pair is not needed when HTTP or
cookie authentication is used and should be empty.
$cfg['Servers'][$i]['nopassword']
Type boolean
Default value false
Deprecated since version 4.7.0: This setting was removed as it can produce unexpected results.
Allow attempt to log in without password when a login with password fails. This can be used together with http
authentication, when authentication is done some other way and phpMyAdmin gets user name from auth and
uses empty password for connecting to MySQL. Password login is still tried first, but as fallback, no password
method is tried.
$cfg['Servers'][$i]['only_db']
Type string or array
Default value ''
If set to a (an array of) database name(s), only this (these) database(s) will be shown to the user. Since ph-
pMyAdmin 2.2.1, this/these database(s) name(s) may contain MySQL wildcards characters (_ and %): if
you want to use literal instances of these characters, escape them (I.E. use 'my\_db' and not 'my_db').
This setting is an efficient way to lower the server load since the latter does not need to send MySQL requests to
build the available database list. But it does not replace the privileges rules of the MySQL database server.
If set, it just means only these databases will be displayed but not that all other databases cant be used.
An example of using more that one database:
$cfg['Servers'][$i]['only_db'] = array('db1', 'db2');
Changed in version 4.0.0: Previous versions permitted to specify the display order of the database names via
this directive.
$cfg['Servers'][$i]['hide_db']
Type string
Default value ''
Regular expression for hiding some databases from unprivileged users. This only hides them from listing, but
a user is still able to access them (using, for example, the SQL query area). To limit access, use the MySQL
privilege system. For example, to hide all databases starting with the letter a, use

$cfg['Servers'][$i]['hide_db'] = 'â';
and to hide both db1 and db2 use
$cfg['Servers'][$i]['hide_db'] = '^(db1|db2)$';
More information on regular expressions can be found in the PCRE pattern syntax portion of the PHP reference
manual.
$cfg['Servers'][$i]['verbose']
Type string
Default value ''
Only useful when using phpMyAdmin with multiple server entries. If set, this string will be displayed instead
of the hostname in the pull-down menu on the main page. This can be useful if you want to show only certain
databases on your system, for example. For HTTP auth, all non-US-ASCII characters will be stripped.
$cfg['Servers'][$i]['extension']
Type string
Default value 'mysqli'
The PHP MySQL extension to use (mysql or mysqli).
It is recommended to use mysqli in all installations.
$cfg['Servers'][$i]['pmadb']
Type string
Default value ''
The name of the database containing the phpMyAdmin configuration storage.
See the phpMyAdmin configuration storage section in this document to see the benefits of this feature, and for a
quick way of creating this database and the needed tables.
If you are the only user of this phpMyAdmin installation, you can use your current database to store those special
tables; in this case, just put your current database name in $cfg['Servers'][$i]['pmadb']. For a
multi-user installation, set this parameter to the name of your central database containing the phpMyAdmin
configuration storage.
$cfg['Servers'][$i]['bookmarktable']
Type string or false
Default value ''
Since release 2.2.0 phpMyAdmin allows users to bookmark queries. This can be useful for queries you often
run. To allow the usage of this functionality:
set up $cfg['Servers'][$i]['pmadb'] and the phpMyAdmin configuration storage
enter the table name in $cfg['Servers'][$i]['bookmarktable']
This feature can be disabled by setting the configuration to false.
$cfg['Servers'][$i]['relation']
Default value ''
Since release 2.2.4 you can describe, in a special relation table, which column is a key in another table (a
foreign key). phpMyAdmin currently uses this to:
make clickable, when you browse the master table, the data values that point to the foreign table;
display in an optional tool-tip the display column when browsing the master table, if you move the
mouse to a column containing a foreign key (use also the table_info table); (see 6.7 How can I use the
display column feature?)
in edit/insert mode, display a drop-down list of possible foreign keys (key value and display column are
shown) (see 6.21 In edit/insert mode, how can I see a list of possible values for a column, based on some
foreign table?)
display links on the table properties page, to check referential integrity (display missing foreign keys) for
each described key;
in query-by-example, create automatic joins (see 6.6 How can I use the relation table in Query-by-
example?)
enable you to get a PDF schema of your database (also uses the table_coords table).
The keys can be numeric or character.
To allow the usage of this functionality:
put the relation table name in $cfg['Servers'][$i]['relation']
now as normal user open phpMyAdmin and for each one of your tables where you want to use this feature,
click Structure/Relation view/ and choose foreign columns.
Note: In the current version, master_db must be the same as foreign_db. Those columns have been put
in future development of the cross-db relations.
$cfg['Servers'][$i]['table_info']
Default value ''
Since release 2.3.0 you can describe, in a special table_info table, which column is to be displayed as a tool-tip
when moving the cursor over the corresponding key. This configuration variable will hold the name of this
special table. To allow the usage of this functionality:
put the table name in $cfg['Servers'][$i]['table_info'] (e.g. pma__table_info)
then for each table where you want to use this feature, click Structure/Relation view/Choose column to
display to choose the column.
See also:
6.7 How can I use the display column feature?
$cfg['Servers'][$i]['table_coords']
Default value ''

The designer feature can save your page layout; by pressing the Save page or Save page as button in the
expanding designer menu, you can customize the layout and have it loaded the next time you use the designer.
That layout is stored in this table. Furthermore, this table is also required for using the PDF relation export
feature, see $cfg['Servers'][$i]['pdf_pages'] for additional details.
$cfg['Servers'][$i]['pdf_pages']
Default value ''
Since release 2.3.0 you can have phpMyAdmin create PDF pages showing the relations between your ta-
bles. Further, the designer interface permits visually managing the relations. To do this it needs two tables
pdf_pages (storing information about the available PDF pages) and table_coords (storing coordinates where
each table will be placed on a PDF schema output). You must be using the relation feature.
put the correct table names in $cfg['Servers'][$i]['table_coords'] and
$cfg['Servers'][$i]['pdf_pages']
This feature can be disabled by setting either of the configurations to false.
See also:
6.8 How can I produce a PDF schema of my database?.
$cfg['Servers'][$i]['column_info']
Default value ''
This part requires a content update! Since release 2.3.0 you can store comments to describe each column for
each table. These will then be shown on the printview.
Starting with release 2.5.0, comments are consequently used on the table property pages and table browse view,
showing up as tool-tips above the column name (properties page) or embedded within the header of table in
browse view. They can also be shown in a table dump. Please see the relevant configuration directives later on.
Also new in release 2.5.0 is a MIME- transformation system which is also based on the following table structure.
See Transformations for further information. To use the MIME- transformation system, your column_info table
has to have the three new columns mimetype, transformation, transformation_options.
Starting with release 4.3.0, a new input-oriented transformation system has been introduced. Also, backward
compatibility code used in the old transformations system was removed. As a result, an update to column_info
table is necessary for previous transformations and the new input-oriented transformation system to work.
phpMyAdmin will upgrade it automatically for you by analyzing your current column_info table structure.
However, if something goes wrong with the auto-upgrade then you can use the SQL script found in ./sql/
upgrade_column_info_4_3_0+.sql to upgrade it manually.
put the table name in $cfg['Servers'][$i]['column_info'] (e.g. pma__column_info)
to update your PRE-2.5.0 Column_comments table use this: and remember that the Variable in
config.inc.php has been renamed from $cfg['Servers'][$i]['column_comments'] to
$cfg['Servers'][$i]['column_info']
ALTER TABLE `pma__column_comments`

ADD `mimetype` VARCHAR( 255 ) NOT NULL,
ADD `transformation` VARCHAR( 255 ) NOT NULL,
ADD `transformation_options` VARCHAR( 255 ) NOT NULL;
to update your PRE-4.3.0 Column_info table manually use this ./sql/

upgrade_column_info_4_3_0+.sql SQL script.
Note: For auto-upgrade functionality to work, your $cfg['Servers'][$i]['controluser'] must

have ALTER privilege on phpmyadmin database. See the MySQL documentation for GRANT on how to
GRANT privileges to a user.
$cfg['Servers'][$i]['history']
Default value ''
Since release 2.5.0 you can store your SQL history, which means all queries you entered manually into the
phpMyAdmin interface. If you dont want to use a table-based history, you can use the JavaScript-based history.
Using that, all your history items are deleted when closing the window. Using $cfg['QueryHistoryMax']
you can specify an amount of history items you want to have on hold. On every login, this list gets cut to the
maximum amount.
The query history is only available if JavaScript is enabled in your browser.
put the table name in $cfg['Servers'][$i]['history'] (e.g. pma__history)
$cfg['Servers'][$i]['recent']
Default value ''
Since release 3.5.0 you can show recently used tables in the navigation panel. It helps you
to jump across table directly, without the need to select the database, and then select the ta-
ble. Using $cfg['NumRecentTables'] you can configure the maximum number of recent ta-
bles shown. When you select a table from the list, it will jump to the page specified in
$cfg['NavigationTreeDefaultTabTable'].
Without configuring the storage, you can still access the recently used tables, but it will disappear after you
logout.
To allow the usage of this functionality persistently:
put the table name in $cfg['Servers'][$i]['recent'] (e.g. pma__recent)
$cfg['Servers'][$i]['favorite']

Default value ''

Since release 4.2.0 you can show a list of selected tables in the navigation panel. It helps you to jump to the
table directly, without the need to select the database, and then select the table. When you select a table from
the list, it will jump to the page specified in $cfg['NavigationTreeDefaultTabTable'].
You can add tables to this list or remove tables from it in database structure page by clicking on the star icons
next to table names. Using $cfg['NumFavoriteTables'] you can configure the maximum number of
favorite tables shown.
Without configuring the storage, you can still access the favorite tables, but it will disappear after you logout.
To allow the usage of this functionality persistently:
put the table name in $cfg['Servers'][$i]['favorite'] (e.g. pma__favorite)
$cfg['Servers'][$i]['table_uiprefs']
Default value ''
Since release 3.5.0 phpMyAdmin can be configured to remember several things (sorted column
$cfg['RememberSorting'], column order, and column visibility from a database table) for browsing
tables. Without configuring the storage, these features still can be used, but the values will disappear after you
logout.
To allow the usage of these functionality persistently:
put the table name in $cfg['Servers'][$i]['table_uiprefs'] (e.g.
pma__table_uiprefs)
$cfg['Servers'][$i]['users']
Default value ''
$cfg['Servers'][$i]['usergroups']
Default value ''
Since release 4.1.0 you can create different user groups with menu items attached to them. Users can be assigned
to these groups and the logged in user would only see menu items configured to the usergroup he is assigned
to. To do this it needs two tables usergroups (storing allowed menu items for each user group) and users
(storing users and their assignments to user groups).
put the correct table names in $cfg['Servers'][$i]['users'] (e.g. pma__users) and
$cfg['Servers'][$i]['usergroups'] (e.g. pma__usergroups)
This feature can be disabled by setting either of the configurations to false.
See also:
Configurable menus and user groups

$cfg['Servers'][$i]['navigationhiding']
Default value ''
Since release 4.1.0 you can hide/show items in the navigation tree.
put the table name in $cfg['Servers'][$i]['navigationhiding'] (e.g.
pma__navigationhiding)
$cfg['Servers'][$i]['central_columns']
Default value ''
Since release 4.3.0 you can have a central list of columns per database. You can add/remove columns to the
list as per your requirement. These columns in the central list will be available to use while you create a new
column for a table or create a table itself. You can select a column from central list while creating a new column,
it will save you from writing the same column definition over again or from writing different names for similar
column.
put the table name in $cfg['Servers'][$i]['central_columns'] (e.g.
pma__central_columns)
$cfg['Servers'][$i]['designer_settings']
Default value ''
Since release 4.5.0 your designer settings can be remembered. Your choice regarding Angular/Direct Links,
Snap to Grid, Toggle Relation Lines, Small/Big All, Move Menu and Pin Text can be remembered
persistently.
put the table name in $cfg['Servers'][$i]['designer_settings'] (e.g.
pma__designer_settings)
$cfg['Servers'][$i]['savedsearches']
Default value ''
Since release 4.2.0 you can save and load query-by-example searches from the Database > Query panel.


put the table name in $cfg['Servers'][$i]['savedsearches'] (e.g.
pma__savedsearches)
$cfg['Servers'][$i]['export_templates']
Default value ''
Since release 4.5.0 you can save and load export templates.
put the table name in $cfg['Servers'][$i]['export_templates'] (e.g.
pma__export_templates)
$cfg['Servers'][$i]['tracking']
Default value ''
Since release 3.3.x a tracking mechanism is available. It helps you to track every SQL command which is exe-
cuted by phpMyAdmin. The mechanism supports logging of data manipulation and data definition statements.
After enabling it you can create versions of tables.
The creation of a version has two effects:
phpMyAdmin saves a snapshot of the table, including structure and indexes.
phpMyAdmin logs all commands which change the structure and/or data of the table and links these
commands with the version number.
Of course you can view the tracked changes. On the Tracking page a complete report is available for every
version. For the report you can use filters, for example you can get a list of statements within a date range.
When you want to filter usernames you can enter * for all names or you enter a list of names separated by ,. In
addition you can export the (filtered) report to a file or to a temporary database.
put the table name in $cfg['Servers'][$i]['tracking'] (e.g. pma__tracking)
$cfg['Servers'][$i]['tracking_version_auto_create']
Type boolean
Default value false
Whether the tracking mechanism creates versions for tables and views automatically.
If this is set to true and you create a table or view with
CREATE TABLE ...
CREATE VIEW ...
and no version exists for it, the mechanism will create a version for you automatically.
$cfg['Servers'][$i]['tracking_default_statements']
Type string
Default value 'CREATE TABLE,ALTER TABLE,DROP TABLE,RENAME TABLE,CREATE
INDEX,DROP INDEX,INSERT,UPDATE,DELETE,TRUNCATE,REPLACE,CREATE
VIEW,ALTER VIEW,DROP VIEW,CREATE DATABASE,ALTER DATABASE,DROP
DATABASE'
Defines the list of statements the auto-creation uses for new versions.
$cfg['Servers'][$i]['tracking_add_drop_view']
Type boolean
Default value true
Whether a DROP VIEW IF EXISTS statement will be added as first line to the log when creating a view.
$cfg['Servers'][$i]['tracking_add_drop_table']
Type boolean
Default value true
Whether a DROP TABLE IF EXISTS statement will be added as first line to the log when creating a table.
$cfg['Servers'][$i]['tracking_add_drop_database']
Type boolean
Default value true
Whether a DROP DATABASE IF EXISTS statement will be added as first line to the log when creating a
database.
$cfg['Servers'][$i]['userconfig']
Default value ''
Since release 3.4.x phpMyAdmin allows users to set most preferences by themselves and store them in the
database.
If you dont allow for storing preferences in $cfg['Servers'][$i]['pmadb'], users can still personal-
ize phpMyAdmin, but settings will be saved in browsers local storage, or, it is is unavailable, until the end of
session.
put the table name in $cfg['Servers'][$i]['userconfig']
$cfg['Servers'][$i]['MaxTableUiprefs']
Type integer
Default value 100
Maximum number of rows saved in $cfg['Servers'][$i]['table_uiprefs'] table.
When tables are dropped or renamed, $cfg['Servers'][$i]['table_uiprefs'] may contain in-
valid data (referring to tables which no longer exist). We only keep this number of newest rows in
$cfg['Servers'][$i]['table_uiprefs'] and automatically delete older rows.

$cfg['Servers'][$i]['SessionTimeZone']
Type string
Default value ''
Sets the time zone used by phpMyAdmin. Leave blank to use the time zone of your database server. Possible
values are explained at https://dev.mysql.com/doc/refman/5.7/en/time-zone-support.html
This is useful when your database server uses a time zone which is different from the time zone you want to use
in phpMyAdmin.
$cfg['Servers'][$i]['AllowRoot']
Type boolean
Default value true
Whether to allow root access. This is just a shortcut for the
$cfg['Servers'][$i]['AllowDeny']['rules'] below.
$cfg['Servers'][$i]['AllowNoPassword']
Type boolean
Default value false
Whether to allow logins without a password. The default value of false for this parameter prevents unintended
access to a MySQL server with was left with an empty password for root or on which an anonymous (blank)
user is defined.
$cfg['Servers'][$i]['AllowDeny']['order']
Type string
Default value ''
If your rule order is empty, then IP authorization is disabled.
If your rule order is set to 'deny,allow' then the system applies all deny rules followed by allow rules.
Access is allowed by default. Any client which does not match a Deny command or does match an Allow
command will be allowed access to the server.
If your rule order is set to 'allow,deny' then the system applies all allow rules followed by deny rules.
Access is denied by default. Any client which does not match an Allow directive or does match a Deny directive
will be denied access to the server.
If your rule order is set to 'explicit', authorization is performed in a similar fashion to rule order
deny,allow, with the added restriction that your host/username combination must be listed in the allow rules,
and not listed in the deny rules. This is the most secure means of using Allow/Deny rules, and was available in
Apache by specifying allow and deny rules without setting any order.
Please also see $cfg['TrustedProxies'] for detecting IP address behind proxies.
$cfg['Servers'][$i]['AllowDeny']['rules']
Type array of strings
Default value array()
The general format for the rules is as such:
<'allow' | 'deny'> <username> [from] <ipmask>
If you wish to match all users, it is possible to use a '%' as a wildcard in the username field.
There are a few shortcuts you can use in the ipmask field as well (please note that those containing
SERVER_ADDRESS might not be available on all webservers):
'all' -> 0.0.0.0/0

'localhost' -> 127.0.0.1/8
'localnetA' -> SERVER_ADDRESS/8
'localnetB' -> SERVER_ADDRESS/16
'localnetC' -> SERVER_ADDRESS/24
Having an empty rule list is equivalent to either using 'allow % from all' if your rule order is set to
'deny,allow' or 'deny % from all' if your rule order is set to 'allow,deny' or 'explicit'.
For the IP address matching system, the following work:
xxx.xxx.xxx.xxx (an exact IP address)
xxx.xxx.xxx.[yyy-zzz] (an IP address range)
xxx.xxx.xxx.xxx/nn (CIDR, Classless Inter-Domain Routing type IP addresses)
But the following does not work:
xxx.xxx.xxx.xx[yyy-zzz] (partial IP address range)
For IPv6 addresses, the following work:
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (an exact IPv6 address)
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:[yyyy-zzzz] (an IPv6 address range)
xxxx:xxxx:xxxx:xxxx/nn (CIDR, Classless Inter-Domain Routing type IPv6 addresses)
But the following does not work:
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xx[yyy-zzz] (partial IPv6 address range)
$cfg['Servers'][$i]['DisableIS']
Type boolean
Default value false
Disable using INFORMATION_SCHEMA to retrieve information (use SHOW commands instead), because of
speed issues when many databases are present.
Note: Enabling this option might give you big performance boost on older MySQL servers.
$cfg['Servers'][$i]['SignonScript']
Type string
Default value ''
Name of PHP script to be sourced and executed to obtain login credentials. This is alternative approach to
session based single signon. The script has to provide a function called get_login_credentials which
returns list of username and password, accepting single parameter of existing username (can be empty). See
examples/signon-script.php for an example:
<?php
/**

*
* This is just example how to use script based single signon with
*
*/
/**
* This function returns username and password.
*
* It can optionally use configured username as parameter.
*
* @param string $user User name
*
* @return array
*/
function get_login_credentials($user)
{
/* Optionally we can use passed username */
if (!empty($user)) {
return array($user, 'password');
}
/* Here we would retrieve the credentials */

$credentials = array('root', '');
return $credentials;
}
See also:
$cfg['Servers'][$i]['SignonSession']
Type string
Default value ''
Name of session which will be used for signon authentication method. You should use something differ-
ent than phpMyAdmin, because this is session which phpMyAdmin uses internally. Takes effect only if
$cfg['Servers'][$i]['SignonScript'] is not configured.
See also:
$cfg['Servers'][$i]['SignonCookieParams']
Type array
An associative array of session cookie parameters of other authentication system. It is not needed if the other
system doesnt use session_set_cookie_params(). Keys should include lifetime, path, domain, secure
or httponly. Valid values are mentioned in session_get_cookie_params, they should be set to same values
as the other application uses. Takes effect only if $cfg['Servers'][$i]['SignonScript'] is not

configured.
See also:
$cfg['Servers'][$i]['SignonURL']
Type string
Default value ''
URL where user will be redirected to log in for signon authentication method. Should be absolute including
protocol.
See also:
$cfg['Servers'][$i]['LogoutURL']
Type string
Default value ''
URL where user will be redirected after logout (doesnt affect config authentication method). Should be absolute
including protocol.
Generic settings
$cfg['DisableShortcutKeys']
Type boolean
Default value false
You can disable phpMyAdmin shortcut keys by setting $cfg['DisableShortcutKeys'] to false.
$cfg['ServerDefault']
Type integer
Default value 1
If you have more than one server configured, you can set $cfg['ServerDefault'] to any one of them
to autoconnect to that server when phpMyAdmin is started, or set it to 0 to be given a list of servers without
logging in.
If you have only one server configured, $cfg['ServerDefault'] MUST be set to that server.
$cfg['VersionCheck']
Type boolean
Default value true
Enables check for latest versions using JavaScript on the main phpMyAdmin page or by directly accessing
version_check.php.
Note: This setting can be adjusted by your vendor.
$cfg['ProxyUrl']
4.3. Generic settings 47

Type string
Default value

The url of the proxy to be used when phpmyadmin needs to access the outside internet such as when retrieving
the latest version info or submitting error reports. You need this if the server where phpMyAdmin is installed
does not have direct access to the internet. The format is: hostname:portnumber
$cfg['ProxyUser']
Type string
Default value

The username for authenticating with the proxy. By default, no authentication is performed. If a username is
supplied, Basic Authentication will be performed. No other types of authentication are currently supported.
$cfg['ProxyPass']
Type string
Default value

The password for authenticating with the proxy.
$cfg['MaxDbList']
Type integer
Default value 100
The maximum number of database names to be displayed in the main panels database list.
$cfg['MaxTableList']
Type integer
Default value 250
The maximum number of table names to be displayed in the main panels list (except on the Export page).
$cfg['ShowHint']
Type boolean
Default value true
Whether or not to show hints (for example, hints when hovering over table headers).
$cfg['MaxCharactersInDisplayedSQL']
Type integer
Default value 1000
The maximum number of characters when a SQL query is displayed. The default limit of 1000 should be correct
to avoid the display of tons of hexadecimal codes that represent BLOBs, but some users have real SQL queries
that are longer than 1000 characters. Also, if a querys length exceeds this limit, this query is not saved in the
history.
$cfg['PersistentConnections']
Type boolean
Default value false

Whether persistent connections should be used or not. Works with following extensions:
mysql (mysql_pconnect),
mysqli (requires PHP 5.3.0 or newer, more information).
$cfg['ForceSSL']
Type boolean
Default value false
Deprecated since version 4.6.0: This setting is no longer available since phpMyAdmin 4.6.0. Please adjust your
webserver instead.
Whether to force using https while accessing phpMyAdmin. In a reverse proxy setup, setting this to true is
not supported.
Note: In some setups (like separate SSL proxy or load balancer) you might have to set
$cfg['PmaAbsoluteUri'] for correct redirection.
$cfg['ExecTimeLimit']
Type integer [number of seconds]
Default value 300
Set the number of seconds a script is allowed to run. If seconds is set to zero, no time limit is imposed. This
setting is used while importing/exporting dump files but has no effect when PHP is running in safe mode.
$cfg['SessionSavePath']
Type string
Default value ''
Path for storing session data (session_save_path PHP parameter).
$cfg['MemoryLimit']
Type string [number of bytes]
Default value '-1'
Set the number of bytes a script is allowed to allocate. If set to '-1', no limit is imposed. If set to '0', no
change of the memory limit is attempted and the php.ini memory_limit is used.
This setting is used while importing/exporting dump files so you definitely dont want to put here a too low
value. It has no effect when PHP is running in safe mode.
You can also use any string as in php.ini, eg. 16M. Ensure you dont omit the suffix (16 means 16 bytes!)
$cfg['SkipLockedTables']
Type boolean
Default value false
Mark used tables and make it possible to show databases with locked tables (since MySQL 3.23.30).
$cfg['ShowSQL']
Type boolean
Default value true
4.3. Generic settings 49

Defines whether SQL queries generated by phpMyAdmin should be displayed or not.

$cfg['RetainQueryBox']
Type boolean
Default value false
Defines whether the SQL query box should be kept displayed after its submission.
$cfg['CodemirrorEnable']
Type boolean
Default value true
Defines whether to use a Javascript code editor for SQL query boxes. CodeMirror provides syntax highlighting
and line numbers. However, middle-clicking for pasting the clipboard contents in some Linux distributions
(such as Ubuntu) is not supported by all browsers.
$cfg['DefaultForeignKeyChecks']
Type string
Default value 'default'
Default value of the checkbox for foreign key checks, to disable/enable foreign key checks for certain queries.
The possible values are 'default', 'enable' or 'disable'. If set to 'default', the value of the
MySQL variable FOREIGN_KEY_CHECKS is used.
$cfg['AllowUserDropDatabase']
Type boolean
Default value false
Warning: This is not a security measure as there will be always ways to circumvent this. If you want to
prohibit users from dropping databases, revoke their corresponding DROP privilege.
Defines whether normal users (non-administrator) are allowed to delete their own database or not. If set as false,
the link Drop Database will not be shown, and even a DROP DATABASE mydatabase will be rejected.
Quite practical for ISP s with many customers.
This limitation of SQL queries is not as strict as when using MySQL privileges. This is due to nature of SQL
queries which might be quite complicated. So this choice should be viewed as help to avoid accidental dropping
rather than strict privilege limitation.
$cfg['Confirm']
Type boolean
Default value true
Whether a warning (Are your really sure...) should be displayed when youre about to lose data.
$cfg['UseDbSearch']
Type boolean
Default value true
Define whether the search string inside database is enabled or not.
$cfg['IgnoreMultiSubmitErrors']
Type boolean
Default value false

Define whether phpMyAdmin will continue executing a multi-query statement if one of the queries fails. Default
is to abort execution.
Cookie authentication options
$cfg['blowfish_secret']
Type string
Default value ''
The cookie auth_type uses AES algorithm to encrypt the password. If you are using the cookie auth_type,
enter here a random passphrase of your choice. It will be used internally by the AES algorithm: you wont be
prompted for this passphrase.
The secret should be 32 characters long. Using shorter will lead to weaker security of encrypted cookies, using
longer will cause no harm.
Note: The configuration is called blowfish_secret for historical reasons as Blowfish algorithm was originally
used to do the encryption.
Changed in version 3.1.0: Since version 3.1.0 phpMyAdmin can generate this on the fly, but it makes a bit
weaker security as this generated secret is stored in session and furthermore it makes impossible to recall user
name from cookie.
$cfg['LoginCookieRecall']
Type boolean
Default value true
Define whether the previous login should be recalled or not in cookie authentication mode.
This is automatically disabled if you do not have configured $cfg['blowfish_secret'].
$cfg['LoginCookieValidity']
Default value 1440
Define how long a login cookie is valid. Please note that php configuration option session.gc_maxlifetime might
limit session validity and if the session is lost, the login cookie is also invalidated. So it is a good idea to set
session.gc_maxlifetime at least to the same value of $cfg['LoginCookieValidity'].
$cfg['LoginCookieStore']
Default value 0
Define how long login cookie should be stored in browser. Default 0 means that it will be kept for existing
session. This is recommended for not trusted environments.
$cfg['LoginCookieDeleteAll']
Type boolean
Default value true
4.4. Cookie authentication options 51

If enabled (default), logout deletes cookies for all servers, otherwise only for current one. Setting this to false
makes it easy to forget to log out from other server, when you are using more of them.
$cfg['AllowArbitraryServer']
Type boolean
Default value false
If enabled, allows you to log in to arbitrary servers using cookie authentication.
Note: Please use this carefully, as this may allow users access to MySQL servers behind the firewall where
your HTTP server is placed. See also $cfg['ArbitraryServerRegexp'].
$cfg['ArbitraryServerRegexp']
Type string
Default value ''
Restricts the MySQL servers to which the user can log in when $cfg['AllowArbitraryServer'] is
enabled by matching the IP or the hostname of the MySQL server to the given regular expression. The regular
expression must be enclosed with a delimiter character.
It is recommended to include start and end symbols in the regullar expression, so that you can avoid partial
matches on the string.
Examples:
// Allow connection to three listed servers:

$cfg['ArbitraryServerRegexp'] = '/^(server|another|yetdifferent)$/';
// Allow connection to range of IP addresses:

$cfg['ArbitraryServerRegexp'] = '@^192\.168\.0\.[0-9]{1,}$@';
// Allow connection to server name ending with -mysql:

$cfg['ArbitraryServerRegexp'] = '@^[^:]\-mysql$@';
Note: The whole server name is matched, it can include port as well. Due to way MySQL is permissive in
connection parameters, it is possible to use connection strings as `server:3306-mysql`. This can be used
to bypass regullar expression by the suffix, while connecting to another server.
$cfg['CaptchaLoginPublicKey']
Type string
Default value ''
The public key for the reCaptcha service that can be obtained from https://www.google.com/recaptcha/intro/.
reCaptcha will be then used in Cookie authentication mode.
$cfg['CaptchaLoginPrivateKey']
Type string
Default value ''
The private key for the reCaptcha service that can be obtain from https://www.google.com/recaptcha/intro/.
reCaptcha will be then used in Cookie authentication mode.
Navigation panel setup
$cfg['ShowDatabasesNavigationAsTree']
Type boolean
Default value true
In the navigation panel, replaces the database tree with a selector
$cfg['FirstLevelNavigationItems']
Type integer
Default value 100
The number of first level databases that can be displayed on each page of navigation tree.
$cfg['MaxNavigationItems']
Type integer
Default value 50
The number of items (tables, columns, indexes) that can be displayed on each page of the navigation tree.
$cfg['NavigationTreeEnableGrouping']
Type boolean
Default value true
Defines whether to group the databases based on a common prefix in their name
$cfg['NavigationTreeDbSeparator'].
$cfg['NavigationTreeDbSeparator']
Type string
Default value '_'
The string used to separate the parts of the database name when showing them in a tree.
$cfg['NavigationTreeTableSeparator']
Type string or array
Default value '__'
Defines a string to be used to nest table spaces. This means if you have tables like first__second__third
this will be shown as a three-level hierarchy like: first > second > third. If set to false or empty, the feature is
disabled. NOTE: You should not use this separator at the beginning or end of a table name or multiple times
after another without any other characters in between.
$cfg['NavigationTreeTableLevel']
Type integer
Default value 1
Defines how many sublevels should be displayed when splitting up tables by the above separator.
$cfg['NumRecentTables']
Type integer
Default value 10
4.5. Navigation panel setup 53

The maximum number of recently used tables shown in the navigation panel. Set this to 0 (zero) to disable the
listing of recent tables.
$cfg['NumFavoriteTables']
Type integer
Default value 10
The maximum number of favorite tables shown in the navigation panel. Set this to 0 (zero) to disable the listing
of favorite tables.
$cfg['ZeroConf']
Type boolean
Default value true
Enables Zero Configuration mode in which the user will be offered a choice to create phpMyAdmin configura-
tion storage in the current database or use the existing one, if already present.
This setting has no effect if the phpMyAdmin configuration storage database is properly created and the related
configuration directives (such as $cfg['Servers'][$i]['pmadb'] and so on) are configured.
$cfg['NavigationLinkWithMainPanel']
Type boolean
Default value true
Defines whether or not to link with main panel by highlighting the current database or table.
$cfg['NavigationDisplayLogo']
Type boolean
Default value true
Defines whether or not to display the phpMyAdmin logo at the top of the navigation panel.
$cfg['NavigationLogoLink']
Type string
Default value 'index.php'
Enter URL where logo in the navigation panel will point to. For use especially with self made theme which
changes this. For external URLs, you should include URL scheme as well.
$cfg['NavigationLogoLinkWindow']
Type string
Default value 'main'
Whether to open the linked page in the main window (main) or in a new one (new). Note: use new if you are
linking to phpmyadmin.net.
$cfg['NavigationTreeDisplayItemFilterMinimum']
Type integer
Default value 30
Defines the minimum number of items (tables, views, routines and events) to display a JavaScript filter box
above the list of items in the navigation tree.
To disable the filter completely some high number can be used (e.g. 9999)
$cfg['NavigationTreeDisplayDbFilterMinimum']
Type integer
Default value 30
Defines the minimum number of databases to display a JavaScript filter box above the list of databases in the
navigation tree.
To disable the filter completely some high number can be used (e.g. 9999)
$cfg['NavigationDisplayServers']
Type boolean
Default value true
Defines whether or not to display a server choice at the top of the navigation panel.
$cfg['DisplayServersList']
Type boolean
Default value false
Defines whether to display this server choice as links instead of in a drop-down.
$cfg['NavigationTreeDefaultTabTable']
Type string
Default value 'structure'
Defines the tab displayed by default when clicking the small icon next to each table name in the navigation
panel. The possible values are the localized equivalent of:
structure
sql
search
insert
browse
$cfg['NavigationTreeDefaultTabTable2']
Type string
Default value null
Defines the tab displayed by default when clicking the second small icon next to each table name in the naviga-
tion panel. The possible values are the localized equivalent of:
(empty)
structure
sql
search
insert
browse
$cfg['NavigationTreeEnableExpansion']
Type boolean
4.5. Navigation panel setup 55

Default value false

Whether to offer the possibility of tree expansion in the navigation panel.
$cfg['NavigationTreeShowTables']
Type boolean
Default value true
Whether to show tables under database in the navigation panel.
$cfg['NavigationTreeShowViews']
Type boolean
Default value true
Whether to show views under database in the navigation panel.
$cfg['NavigationTreeShowFunctions']
Type boolean
Default value true
Whether to show functions under database in the navigation panel.
$cfg['NavigationTreeShowProcedures']
Type boolean
Default value true
Whether to show procedures under database in the navigation panel.
$cfg['NavigationTreeShowEvents']
Type boolean
Default value true
Whether to show events under database in the navigation panel.
Main panel
$cfg['ShowStats']
Type boolean
Default value true
Defines whether or not to display space usage and statistics about databases and tables. Note that statistics
requires at least MySQL 3.23.3 and that, at this date, MySQL doesnt return such information for Berkeley DB
tables.
$cfg['ShowServerInfo']
Type boolean
Default value true
Defines whether to display detailed server information on main page. You can additionally hide more informa-
tion by using $cfg['Servers'][$i]['verbose'].
$cfg['ShowPhpInfo']
Type boolean
Default value false
Defines whether to display the PHP information or not at the starting main (right) frame.
Please note that to block the usage of phpinfo() in scripts, you have to put this in your php.ini:
disable_functions = phpinfo()
Warning: Enabling phpinfo page will leak quite a lot of information about server setup. Is it not recom-
mended to enable this on shared installations.
This might also make easier some remote attacks on your installations, so enable this only when needed.
$cfg['ShowChgPassword']
Type boolean
Default value true
Defines whether to display the Change password link or not at the starting main (right) frame. This setting does
not check MySQL commands entered directly.
Please note that enabling the Change password link has no effect with config authentication mode: because of
the hard coded password value in the configuration file, end users cant be allowed to change their passwords.
$cfg['ShowCreateDb']
Type boolean
Default value true
Defines whether to display the form for creating database or not at the starting main (right) frame. This setting
does not check MySQL commands entered directly.
$cfg['ShowGitRevision']
Type boolean
Default value true
Defines whether to display informations about the current Git revision (if applicable) on the main panel.
$cfg['MysqlMinVersion']
Type array
Defines the minimum supported MySQL version. The default is chosen by the phpMyAdmin team; however
this directive was asked by a developer of the Plesk control panel to ease integration with older MySQL servers
(where most of the phpMyAdmin features work).
Database structure
$cfg['ShowDbStructureCreation']
Type boolean
Default value false
Defines whether the database structure page (tables list) has a Creation column that displays when each table
was created.
4.7. Database structure 57

$cfg['ShowDbStructureLastUpdate']
Type boolean
Default value false
Defines whether the database structure page (tables list) has a Last update column that displays when each
table was last updated.
$cfg['ShowDbStructureLastCheck']
Type boolean
Default value false
Defines whether the database structure page (tables list) has a Last check column that displays when each
table was last checked.
$cfg['HideStructureActions']
Type boolean
Default value true
Defines whether the table structure actions are hidden under a More drop-down.
Browse mode
$cfg['TableNavigationLinksMode']
Type string
Default value 'icons'
Defines whether the table navigation links contain 'icons', 'text' or 'both'.
$cfg['ActionLinksMode']
Type string
Default value 'both'
If set to icons, will display icons instead of text for db and table properties links (like Browse, Select, Insert,
...). Can be set to 'both' if you want icons AND text. When set to text, will only show text.
$cfg['RowActionType']
Type string
Whether to display icons or text or both icons and text in table row action segment. Value can be either of
'icons', 'text' or 'both'.
$cfg['ShowAll']
Type boolean
Default value false
Defines whether a user should be displayed a Show all button in browse mode or not in all cases. By default
it is shown only on small tables (less than 500 rows) to avoid performance issues while getting too many rows.
$cfg['MaxRows']
Type integer
Default value 25
Number of rows displayed when browsing a result set and no LIMIT clause is used. If the result set contains
more rows, Previous and Next links will be shown. Possible values: 25,50,100,250,500.
$cfg['Order']
Type string
Default value 'SMART'
Defines whether columns are displayed in ascending (ASC) order, in descending (DESC) order or in a smart
(SMART) order - I.E. descending order for columns of type TIME, DATE, DATETIME and TIMESTAMP,
ascending order else- by default.
Changed in version 3.4.0: Since phpMyAdmin 3.4.0 the default value is 'SMART'.
$cfg['GridEditing']
Type string
Default value 'double-click'
Defines which action (double-click or click) triggers grid editing. Can be deactivated with the
disabled value.
$cfg['RelationalDisplay']
Type string
Default value 'K'
Defines the initial behavior for Options > Relational. K, which is the default, displays the key while D shows the
display column.
$cfg['SaveCellsAtOnce']
Type boolean
Default value false
Defines whether or not to save all edited cells at once for grid editing.
Editing mode
$cfg['ProtectBinary']
Type boolean or string
Default value 'blob'
Defines whether BLOB or BINARY columns are protected from editing when browsing a tables content. Valid
values are:
false to allow editing of all columns;
'blob' to allow editing of all columns except BLOBS;
'noblob' to disallow editing of all columns except BLOBS (the opposite of 'blob');
'all' to disallow editing of all BINARY or BLOB columns.
$cfg['ShowFunctionFields']
Type boolean
4.9. Editing mode 59

Default value true

Defines whether or not MySQL functions fields should be initially displayed in edit/insert mode. Since version
2.10, the user can toggle this setting from the interface.
$cfg['ShowFieldTypesInDataEditView']
Type boolean
Default value true
Defines whether or not type fields should be initially displayed in edit/insert mode. The user can toggle this
setting from the interface.
$cfg['InsertRows']
Type integer
Default value 2
Defines the maximum number of concurrent entries for the Insert page.
$cfg['ForeignKeyMaxLimit']
Type integer
Default value 100
If there are fewer items than this in the set of foreign keys, then a drop-down box of foreign keys is presented,
in the style described by the $cfg['ForeignKeyDropdownOrder'] setting.
$cfg['ForeignKeyDropdownOrder']
Type array
Default value array(content-id, id-content)
For the foreign key drop-down fields, there are several methods of display, offering both the key and value data.
The contents of the array should be one or both of the following strings: content-id, id-content.
Export and import settings
$cfg['ZipDump']
Type boolean
Default value true
$cfg['GZipDump']
Type boolean
Default value true
$cfg['BZipDump']
Type boolean
Default value true
Defines whether to allow the use of zip/GZip/BZip2 compression when creating a dump file
$cfg['CompressOnFly']
Type boolean
Default value true
Defines whether to allow on the fly compression for GZip/BZip2 compressed exports. This doesnt affect smaller
dumps and allows users to create larger dumps that wont otherwise fit in memory due to php memory limit.
Produced files contain more GZip/BZip2 headers, but all normal programs handle this correctly.
$cfg['Export']
Type array
Default value array(...)
In this array are defined default parameters for export, names of items are similar to texts seen on export page,
so you can easily identify what they mean.
$cfg['Export']['format']
Type string
Default value 'sql'
Default export format.
$cfg['Export']['method']
Type string
Default value 'quick'
Defines how the export form is displayed when it loads. Valid values are:
quick to display the minimum number of options to configure
custom to display every available option to configure
custom-no-form same as custom but does not display the option of using quick export
$cfg['Export']['charset']
Type string
Default value ''
Defines charset for generated export. By default no charset conversion is done assuming UTF-8.
$cfg['Export']['file_template_table']
Type string
Default value '@TABLE@'
Default filename template for table exports.
See also:
6.27 What format strings can I use?
$cfg['Export']['file_template_database']
Type string
Default value '@DATABASE@'
Default filename template for database exports.
See also:
$cfg['Export']['file_template_server']
Type string
4.10. Export and import settings 61

Default value '@SERVER@'

Default filename template for server exports.
See also:
$cfg['Import']
Type array
In this array are defined default parameters for import, names of items are similar to texts seen on import page,
so you can easily identify what they mean.
$cfg['Import']['charset']
Type string
Default value ''
Defines charset for import. By default no charset conversion is done assuming UTF-8.
Tabs display settings
$cfg['TabsMode']
Type string
Defines whether the menu tabs contain 'icons', 'text' or 'both'.
$cfg['PropertiesNumColumns']
Type integer
Default value 1
How many columns will be utilized to display the tables on the database property view? When setting this to a
value larger than 1, the type of the database will be omitted for more display space.
$cfg['DefaultTabServer']
Type string
Default value 'welcome'
Defines the tab displayed by default on server view. The possible values are the localized equivalent of:
welcome (recommended for multi-user setups)
databases,
status
variables
privileges
$cfg['DefaultTabDatabase']
Type string
Default value 'structure'
Defines the tab displayed by default on database view. The possible values are the localized equivalent of:
structure
sql
search
operations
$cfg['DefaultTabTable']
Type string
Default value 'browse'
Defines the tab displayed by default on table view. The possible values are the localized equivalent of:
structure
sql
search
insert
browse
PDF Options
$cfg['PDFPageSizes']
Type array
Default value array('A3', 'A4', 'A5', 'letter', 'legal')
Array of possible paper sizes for creating PDF pages.
You should never need to change this.
$cfg['PDFDefaultPageSize']
Type string
Default value 'A4'
Default page size to use when creating PDF pages. Valid values are any listed in $cfg['PDFPageSizes'].
Languages
$cfg['DefaultLang']
Type string
Default value 'en'
Defines the default language to use, if not browser-defined or user- defined. The corresponding language file
needs to be in locale/code/LC_MESSAGES/phpmyadmin.mo.
$cfg['DefaultConnectionCollation']
Type string
Default value 'utf8mb4_general_ci'
4.12. PDF Options 63

Defines the default connection collation to use, if not user-defined. See the MySQL documentation for charsets
for list of possible values.
$cfg['Lang']
Type string
Default value not set
Force language to use. The corresponding language file needs to be in lo-
cale/code/LC_MESSAGES/phpmyadmin.mo.
$cfg['FilterLanguages']
Type string
Default value ''
Limit list of available languages to those matching the given regular expression. For example if you want only
Czech and English, you should set filter to '^(cs|en)'.
$cfg['RecodingEngine']
Type string
Default value 'auto'
You can select here which functions will be used for character set conversion. Possible values are:
auto - automatically use available one (first is tested iconv, then recode)
iconv - use iconv or libiconv functions
recode - use recode_string function
mb - use mbstring extension
none - disable encoding conversion
Enabled charset conversion activates a pull-down menu in the Export and Import pages, to choose the character
set when exporting a file. The default value in this menu comes from $cfg['Export']['charset'] and
$cfg['Import']['charset'].
$cfg['IconvExtraParams']
Type string
Default value '//TRANSLIT'
Specify some parameters for iconv used in charset conversion. See iconv documentation for details. By default
//TRANSLIT is used, so that invalid characters will be transliterated.
$cfg['AvailableCharsets']
Type array
Available character sets for MySQL conversion. You can add your own (any of supported by recode/iconv) or
remove these which you dont use. Character sets will be shown in same order as here listed, so if you frequently
use some of these move them to the top.
Web server settings
$cfg['OBGzip']
Type string/boolean
Defines whether to use GZip output buffering for increased speed in HTTP transfers. Set to true/false for
enabling/disabling. When set to auto (string), phpMyAdmin tries to enable output buffering and will automat-
ically disable it if your browser has some problems with buffering. IE6 with a certain patch is known to cause
data corruption when having enabled buffering.
$cfg['TrustedProxies']
Type array
Lists proxies and HTTP headers which are trusted for $cfg['Servers'][$i]['AllowDeny']['order'].
This list is by default empty, you need to fill in some trusted proxy servers if you want to use rules for IP
addresses behind proxy.
The following example specifies that phpMyAdmin should trust a HTTP_X_FORWARDED_FOR (X
-Forwarded-For) header coming from the proxy 1.2.3.4:
$cfg['TrustedProxies'] = array('1.2.3.4' => 'HTTP_X_FORWARDED_FOR');
The $cfg['Servers'][$i]['AllowDeny']['rules'] directive uses the clients IP address as usual.

$cfg['GD2Available']
Type string
Specifies whether GD >= 2 is available. If yes it can be used for MIME transformations. Possible values are:
auto - automatically detect
yes - GD 2 functions can be used
no - GD 2 function cannot be used
$cfg['CheckConfigurationPermissions']
Type boolean
Default value true
We normally check the permissions on the configuration file to ensure its not world writable. However, ph-
pMyAdmin could be installed on a NTFS filesystem mounted on a non-Windows server, in which case the
permissions seems wrong but in fact cannot be detected. In this case a sysadmin would set this parameter to
false.
$cfg['LinkLengthLimit']
Type integer
Default value 1000
Limit for length of URL in links. When length would be above this limit, it is replaced by form with button.
This is required as some web servers (IIS) have problems with long URL .
$cfg['CSPAllow']
Type string
Default value ''
4.14. Web server settings 65

Additional string to include in allowed script and image sources in Content Security Policy header.
This can be useful when you want to include some external JavaScript files in config.footer.inc.php
or config.header.inc.php, which would be normally not allowed by Content Security Policy.
To allow some sites, just list them within the string:
$cfg['CSPAllow'] = 'example.com example.net';

$cfg['DisableMultiTableMaintenance']
Type boolean
Default value false
In the database Structure page, its possible to mark some tables then choose an operation like optimizing
for many tables. This can slow down a server; therefore, setting this to true prevents this kind of multiple
maintenance operation.
Theme settings
Please directly modify themes/themename/layout.inc.php, although your changes will be

overwritten with the next update.
Design customization
$cfg['NavigationTreePointerEnable']
Type boolean
Default value true
When set to true, hovering over an item in the navigation panel causes that item to be marked (the background
is highlighted).
$cfg['BrowsePointerEnable']
Type boolean
Default value true
When set to true, hovering over a row in the Browse page causes that row to be marked (the background is
highlighted).
$cfg['BrowseMarkerEnable']
Type boolean
Default value true
When set to true, a data row is marked (the background is highlighted) when the row is selected with the
checkbox.
$cfg['LimitChars']
Type integer
Default value 50
Maximum number of characters shown in any non-numeric field on browse view. Can be turned off by a toggle
button on the browse page.
$cfg['RowActionLinks']
Type string
Default value 'left'
Defines the place where table row links (Edit, Copy, Delete) would be put when tables contents are displayed
(you may have them displayed at the left side, right side, both sides or nowhere).
$cfg['RowActionLinksWithoutUnique']
Type boolean
Default value false
Defines whether to show row links (Edit, Copy, Delete) and checkboxes for multiple row operations even when
the selection does not have a unique key. Using row actions in the absence of a unique key may result in
different/more rows being affected since there is no guaranteed way to select the exact row(s).
$cfg['RememberSorting']
Type boolean
Default value true
If enabled, remember the sorting of each table when browsing them.
$cfg['TablePrimaryKeyOrder']
Type string
Default value 'NONE'
This defines the default sort order for the tables, having a primary key, when there is no sort order defines
externally. Acceptable values : [NONE, ASC, DESC]
$cfg['ShowBrowseComments']
Type boolean
Default value true
$cfg['ShowPropertyComments']
Type boolean
Default value true
By setting the corresponding variable to true you can enable the display of column comments in Browse or
Property display. In browse mode, the comments are shown inside the header. In property mode, comments
are displayed using a CSS-formatted dashed-line below the name of the column. The comment is shown as a
tool-tip for that column.
Text fields
$cfg['CharEditing']
Type string
Default value 'input'
4.17. Text fields 67

Defines which type of editing controls should be used for CHAR and VARCHAR columns. Applies to data
editing and also to the default values in structure editing. Possible values are:
input - this allows to limit size of text to size of columns in MySQL, but has problems with newlines in
columns
textarea - no problems with newlines in columns, but also no length limitations
$cfg['MinSizeForInputField']
Type integer
Default value 4
Defines the minimum size for input fields generated for CHAR and VARCHAR columns.
$cfg['MaxSizeForInputField']
Type integer
Default value 60
Defines the maximum size for input fields generated for CHAR and VARCHAR columns.
$cfg['TextareaCols']
Type integer
Default value 40
$cfg['TextareaRows']
Type integer
Default value 15
$cfg['CharTextareaCols']
Type integer
Default value 40
$cfg['CharTextareaRows']
Type integer
Default value 2
Number of columns and rows for the textareas. This value will be emphasized (*2) for SQL query textareas and
(*1.25) for SQL textareas inside the query window.
The Char* values are used for CHAR and VARCHAR editing (if configured via $cfg['CharEditing']).
$cfg['LongtextDoubleTextarea']
Type boolean
Default value true
Defines whether textarea for LONGTEXT columns should have double size.
$cfg['TextareaAutoSelect']
Type boolean
Default value false
Defines if the whole textarea of the query box will be selected on click.
$cfg['EnableAutocompleteForTablesAndColumns']
Type boolean
Default value true
Whether to enable autocomplete for table and column names in any SQL query box.
SQL query box settings
$cfg['SQLQuery']['Edit']
Type boolean
Default value true
Whether to display an edit link to change a query in any SQL Query box.
$cfg['SQLQuery']['Explain']
Type boolean
Default value true
Whether to display a link to explain a SELECT query in any SQL Query box.
$cfg['SQLQuery']['ShowAsPHP']
Type boolean
Default value true
Whether to display a link to wrap a query in PHP code in any SQL Query box.
$cfg['SQLQuery']['Refresh']
Type boolean
Default value true
Whether to display a link to refresh a query in any SQL Query box.
Web server upload/save/import directories
If PHP is running in safe mode, all directories must be owned by the same user as the owner of the phpMyAdmin
scripts.
If the directory where phpMyAdmin is installed is subject to an open_basedir restriction, you need to create a
temporary directory in some directory accessible by the PHP interpreter.
For security reasons, all directories should be outside the tree published by webserver. If you cannot avoid having this
directory published by webserver, limit access to it either by web server configuration (for example using .htaccess or
web.config files) or place at least an empty index.html file there, so that directory listing is not possible. However
as long as the directory is accessible by web server, an attacker can guess filenames to download the files.
$cfg['UploadDir']
Type string
Default value ''
4.18. SQL query box settings 69

The name of the directory where SQL files have been uploaded by other means than phpMyAdmin (for example,
ftp). Those files are available under a drop-down box when you click the database or table name, then the Import
tab.
If you want different directory for each user, %u will be replaced with username.
Please note that the file names must have the suffix .sql (or .sql.bz2 or .sql.gz if support for compressed
formats is enabled).
This feature is useful when your file is too big to be uploaded via HTTP, or when file uploads are disabled in
PHP.
Warning: Please see top of this chapter (Web server upload/save/import directories) for instructions how
to setup this directory and how to make its usage secure.
See also:
See 1.16 I cannot upload big dump files (memory, HTTP or timeout problems). for alternatives.
$cfg['SaveDir']
Type string
Default value ''
The name of the directory where dumps can be saved.
If you want different directory for each user, %u will be replaced with username.
Please note that the directory must exist and has to be writable for the user running webserver.
$cfg['TempDir']
Type string
Default value ''
The name of the directory where temporary files can be stored.
This is needed for importing ESRI Shapefiles, see 6.30 Import: How can I import ESRI Shapefiles? and to work
around limitations of open_basedir for uploaded files, see 1.11 I get an open_basedir restriction while
uploading a file from the import tab..
This directory should have as strict permissions as possible as the only user required to access this directory is
the one who runs the webserver. If you have root privileges, simply make this user owner of this directory and
make it accessible only by it:
chown www-data:www-data tmp

chmod 700 tmp
If you cannot change owner of the directory, you can achieve a similar setup using ACL:
chmod 700 tmp

setfacl -m "g:www-data:rwx" tmp
setfacl -d -m "g:www-data:rwx" tmp
If neither of above works for you, you can still make the directory chmod 777, but it might impose risk of
other users on system reading and writing data in this directory.
Various display setting
$cfg['RepeatCells']
Type integer
Default value 100
Repeat the headers every X cells, or 0 to deactivate.
$cfg['QueryHistoryDB']
Type boolean
Default value false
$cfg['QueryHistoryMax']
Type integer
Default value 25
If $cfg['QueryHistoryDB'] is set to true, all your Queries are logged to a table, which has to be created
by you (see $cfg['Servers'][$i]['history']). If set to false, all your queries will be appended to
the form, but only as long as your window is opened they remain saved.
When using the JavaScript based query window, it will always get updated when you click on a new table/db to
browse and will focus if you click on Edit SQL after using a query. You can suppress updating the query window
by checking the box Do not overwrite this query from outside the window below the query textarea. Then you
can browse tables/databases in the background without losing the contents of the textarea, so this is especially
useful when composing a query with tables you first have to look in. The checkbox will get automatically
checked whenever you change the contents of the textarea. Please uncheck the button whenever you definitely
want the query window to get updated even though you have made alterations.
If $cfg['QueryHistoryDB'] is set to true you can specify the amount of saved history items using
$cfg['QueryHistoryMax'].
$cfg['BrowseMIME']
Type boolean
Default value true
Enable Transformations.
$cfg['MaxExactCount']
Type integer
Default value 500000
For InnoDB tables, determines for how large tables phpMyAdmin should get the exact row count using SELECT
COUNT. If the approximate row count as returned by SHOW TABLE STATUS is smaller than this value,
SELECT COUNT will be used, otherwise the approximate count will be used.
4.20. Various display setting 71

See also:
3.11 The number of rows for InnoDB tables is not correct.
$cfg['MaxExactCountViews']
Type integer
Default value 0
For VIEWs, since obtaining the exact count could have an impact on performance, this value is the maximum
to be displayed, using a SELECT COUNT ... LIMIT. Setting this to 0 bypasses any row counting.
$cfg['NaturalOrder']
Type boolean
Default value true
Sorts database and table names according to natural order (for example, t1, t2, t10). Currently implemented in
the navigation panel and in Database view, for the table list.
$cfg['InitialSlidersState']
Type string
Default value 'closed'
If set to 'closed', the visual sliders are initially in a closed state. A value of 'open' does the reverse. To
completely disable all visual sliders, use 'disabled'.
$cfg['UserprefsDisallow']
Type array
Contains names of configuration options (keys in $cfg array) that users cant set through user preferences. For
possible values, refer to libraries/config/user_preferences.forms.php.
$cfg['UserprefsDeveloperTab']
Type boolean
Default value false
Activates in the user preferences a tab containing options for developers of phpMyAdmin.
Page titles
$cfg['TitleTable']
Type string
Default value '@HTTP_HOST@ / @VSERVER@ / @DATABASE@ / @TABLE@ |
@PHPMYADMIN@'
$cfg['TitleDatabase']
Type string
Default value '@HTTP_HOST@ / @VSERVER@ / @DATABASE@ | @PHPMYADMIN@'
$cfg['TitleServer']
Type string
Default value '@HTTP_HOST@ / @VSERVER@ | @PHPMYADMIN@'

$cfg['TitleDefault']
Type string
Default value '@HTTP_HOST@ | @PHPMYADMIN@'
Allows you to specify windows title bar. You can use 6.27 What format strings can I use?.
Theme manager settings
$cfg['ThemeManager']
Type boolean
Default value true
Enables user-selectable themes. See 2.7 Using and creating themes.
$cfg['ThemeDefault']
Type string
Default value 'pmahomme'
The default theme (a subdirectory under ./themes/).
$cfg['ThemePerServer']
Type boolean
Default value false
Whether to allow different theme for each server.
Default queries
$cfg['DefaultQueryTable']
Type string
Default value 'SELECT * FROM @TABLE@ WHERE 1'
$cfg['DefaultQueryDatabase']
Type string
Default value ''
Default queries that will be displayed in query boxes when user didnt specify any. You can use standard 6.27
What format strings can I use?.
MySQL settings
$cfg['DefaultFunctions']
Type array
4.22. Theme manager settings 73

Functions selected by default when inserting/changing row, Functions are defined for meta types
as (FUNC_NUMBER, FUNC_DATE, FUNC_CHAR, FUNC_SPATIAL, FUNC_UUID) and for
first_timestamp, which is used for first timestamp column in table.
Developer
Warning: These settings might have huge effect on performance or security.
$cfg['DBG']
Type array
$cfg['DBG']['sql']
Type boolean
Default value false
Enable logging queries and execution times to be displayed in the consoles Debug SQL tab.
$cfg['DBG']['sqllog']
Type boolean
Default value false
Enable logging of queries and execution times to the syslog. Requires $cfg['DBG']['sql'] to be enabled.
$cfg['DBG']['demo']
Type boolean
Default value false
Enable to let server present itself as demo server. This is used for phpMyAdmin demo server.
Examples
See following configuration snippets for typical setups of phpMyAdmin.
Basic example
Example configuration file, which can be copied to config.inc.php to get some core configuration layout; it is
distributed with phpMyAdmin as config.sample.inc.php. Please note that it does not contain all configuration
options, only the most frequently used ones.
<?php
/**
* phpMyAdmin sample configuration, you can use it as base for
* manual configuration. For easier setup you can use setup/
*
* All directives are explained in documentation in the doc/ folder
* or at <https://docs.phpmyadmin.net/>.
*
*/
/**
* This is needed for cookie based authentication to encrypt password in
* cookie. Needs to be 32 chars long.
*/
$cfg['blowfish_secret'] = ''; /* YOU MUST FILL IN THIS FOR COOKIE AUTH! */
/**
* Servers configuration
*/
$i = 0;
/**
* First server
*/
$i++;
/* Authentication type */
/* Server parameters */
$cfg['Servers'][$i]['host'] = 'localhost';
$cfg['Servers'][$i]['compress'] = false;
$cfg['Servers'][$i]['AllowNoPassword'] = false;
/**
* phpMyAdmin configuration storage settings.
*/
/* User used to manipulate with storage */

// $cfg['Servers'][$i]['controlhost'] = '';
// $cfg['Servers'][$i]['controlport'] = '';
// $cfg['Servers'][$i]['controluser'] = 'pma';
// $cfg['Servers'][$i]['controlpass'] = 'pmapass';
/* Storage database and tables */

// $cfg['Servers'][$i]['pmadb'] = 'phpmyadmin';
// $cfg['Servers'][$i]['bookmarktable'] = 'pma__bookmark';
// $cfg['Servers'][$i]['relation'] = 'pma__relation';
// $cfg['Servers'][$i]['table_info'] = 'pma__table_info';
// $cfg['Servers'][$i]['table_coords'] = 'pma__table_coords';
// $cfg['Servers'][$i]['pdf_pages'] = 'pma__pdf_pages';
// $cfg['Servers'][$i]['column_info'] = 'pma__column_info';
// $cfg['Servers'][$i]['history'] = 'pma__history';
// $cfg['Servers'][$i]['table_uiprefs'] = 'pma__table_uiprefs';
// $cfg['Servers'][$i]['tracking'] = 'pma__tracking';
// $cfg['Servers'][$i]['userconfig'] = 'pma__userconfig';
// $cfg['Servers'][$i]['recent'] = 'pma__recent';
// $cfg['Servers'][$i]['favorite'] = 'pma__favorite';
// $cfg['Servers'][$i]['users'] = 'pma__users';
// $cfg['Servers'][$i]['usergroups'] = 'pma__usergroups';
// $cfg['Servers'][$i]['navigationhiding'] = 'pma__navigationhiding';
// $cfg['Servers'][$i]['savedsearches'] = 'pma__savedsearches';
// $cfg['Servers'][$i]['central_columns'] = 'pma__central_columns';
// $cfg['Servers'][$i]['designer_settings'] = 'pma__designer_settings';
// $cfg['Servers'][$i]['export_templates'] = 'pma__export_templates';
4.26. Examples 75
/**
* End of servers configuration
*/
/**
* Directories for saving/loading files from server
*/
$cfg['UploadDir'] = '';
$cfg['SaveDir'] = '';
/**
* Whether to display icons or text or both icons and text in table row
* action segment. Value can be either of 'icons', 'text' or 'both'.
* default = 'both'
*/
//$cfg['RowActionType'] = 'icons';
/**
* Defines whether a user should be displayed a "show all (records)"
* button in browse mode or not.
* default = false
*/
//$cfg['ShowAll'] = true;
/**
* Number of rows displayed when browsing a result set. If the result
* set contains more rows, "Previous" and "Next".
* Possible values: 25, 50, 100, 250, 500
* default = 25
*/
//$cfg['MaxRows'] = 50;
/**
* Disallow editing of binary fields
* valid values are:
* false allow editing
* 'blob' allow editing except for BLOB fields
* 'noblob' disallow editing except for BLOB fields
* 'all' disallow editing
* default = 'blob'
*/
//$cfg['ProtectBinary'] = false;
/**
* Default language to use, if not browser-defined or user-defined
* (you find all languages in the locale folder)
* uncomment the desired line:
* default = 'en'
*/
//$cfg['DefaultLang'] = 'en';
//$cfg['DefaultLang'] = 'de';
/**
* How many columns should be used for table display of a database?
* (a value larger than 1 results in some information being hidden)
* default = 1
*/
//$cfg['PropertiesNumColumns'] = 2;
/**
* Set to true if you want DB-based query history.If false, this utilizes
* JS-routines to display query history (lost by window close)
*
* This requires configuration storage enabled, see above.
* default = false
*/
//$cfg['QueryHistoryDB'] = true;
/**
* When using DB-based query history, how many entries should be kept?
* default = 25
*/
//$cfg['QueryHistoryMax'] = 100;
/**
* Whether or not to query the user before sending the error report to
* the phpMyAdmin team when a JavaScript error occurs
*
* Available options
* ('ask' | 'always' | 'never')
* default = 'ask'
*/
//$cfg['SendErrorReports'] = 'always';
/**
* You can find more configuration options in the documentation
* in the doc/ folder or at <https://docs.phpmyadmin.net/>.
*/
Warning: Dont use the controluser pma if it does not yet exist and dont use pmapass as password.
Example for signon authentication
This example uses examples/signon.php to demonstrate usage of Signon authentication mode:

<?php
$i = 0;
$i++;
$cfg['Servers'][$i]['extension'] = 'mysqli';
$cfg['Servers'][$i]['auth_type'] = 'signon';
$cfg['Servers'][$i]['SignonSession'] = 'SignonSession';
$cfg['Servers'][$i]['SignonURL'] = 'examples/signon.php';
?>`
Example for IP address limited autologin
If you want to automatically login when accessing phpMyAdmin locally while asking for a password when accessing
remotely, you can achieve it using following snippet:
if ($_SERVER["REMOTE_ADDR"] == "127.0.0.1") {
$cfg['Servers'][$i]['auth_type'] = 'config';
4.26. Examples 77
$cfg['Servers'][$i]['user'] = 'root';
$cfg['Servers'][$i]['password'] = 'yourpassword';
} else {
}
Note: Filtering based on IP addresses isnt reliable over the internet, use it only for local address.
Example for using multiple MySQL servers
You can configure any number of servers using $cfg['Servers'], following example shows two of them:
<?php
$cfg['blowfish_secret']='multiServerExample70518';
//any string of your choice
$i = 0;
$i++; // server 1 :
$cfg['Servers'][$i]['verbose'] = 'no1';
$cfg['Servers'][$i]['host'] = 'localhost';
// more options for #1 ...
$i++; // server 2 :
$cfg['Servers'][$i]['verbose'] = 'no2';
$cfg['Servers'][$i]['host'] = 'remote.host.addr';//or ip:'10.9.8.1'
// this server must allow remote clients, e.g., host 10.9.8.%
// not only in mysql.host but also in the startup configuration
// more options for #2 ...
// end of server sections

$cfg['ServerDefault'] = 0; // to choose the server on startup
// further general options ...

?>
Google Cloud SQL with SSL
To connect to Google Could SQL, you currently need to disable certificate verification. This is caused by the certficate
being issued for CN matching your instance name, but you connect to an IP address and PHP tries to match these two.
With verfication you end up with error message like:
Peer certificate CN=àpi-project-851612429544:pmatest' did not match expected CN=`8.8.

8.8'
Warning: With disabled verification your traffic is encrypted, but youre open to man in the middle attacks.
To connect phpMyAdmin to Google Cloud SQL using SSL download the client and server certificates and tell php-
MyAdmin to use them:
// IP address of your instance

$cfg['Servers'][$i]['host'] = '8.8.8.8';
// Use SSL for connection
$cfg['Servers'][$i]['ssl'] = true;
// Client secret key
$cfg['Servers'][$i]['ssl_key'] = '../client-key.pem';
// Client certificate
$cfg['Servers'][$i]['ssl_cert'] = '../client-cert.pem';
// Server certification authority
$cfg['Servers'][$i]['ssl_ca'] = '../server-ca.pem';
// Disable SSL verification (see above note)
$cfg['Servers'][$i]['ssl_verify'] = false;
See also:
$cfg['Servers'][$i]['ssl_verify'], <https://bugs.php.net/bug.php?id=72048>
4.26. Examples 79
CHAPTER 5
User Guide
Transformations
Note: You need to have configured the phpMyAdmin configuration storage for using transformations feature.
Introduction
To enable transformations, you have to setup the column_info table and the proper directives. Please see the
Configuration on how to do so.
You can apply different transformations to the contents of each column. The transformation will take the content of
each column and transform it with certain rules defined in the selected transformation.
Say you have a column filename which contains a filename. Normally you would see in phpMyAdmin only this
filename. Using transformations you can transform that filename into a HTML link, so you can click inside of the
phpMyAdmin structure on the columns link and will see the file displayed in a new browser window. Using trans-
formation options you can also specify strings to append/prepend to a string or the format you want the output stored
in.
For a general overview of all available transformations and their options, you can consult your <www.your-
host.com>/<your-install- dir>/transformation_overview.php installation.
For a tutorial on how to effectively use transformations, see our Link section on the official phpMyAdmin homepage.
Usage
Go to your tbl_structure.php page (i.e. reached through clicking on the Structure link for a table). There click on
Change (or change icon) and there you will see three new fields at the end of the line. They are called MIME-type,
Browser transformation and Transformation options.
81
The field MIME-type is a drop-down field. Select the MIME-type that corresponds to the columns contents.
Please note that transformations are inactive as long as no MIME-type is selected.
The field Browser transformation is a drop-down field. You can choose from a hopefully growing amount
of pre-defined transformations. See below for information on how to build your own transformation. There
are global transformations and mimetype-bound transformations. Global transformations can be used for any
mimetype. They will take the mimetype, if necessary, into regard. Mimetype-bound transformations usually
only operate on a certain mimetype. There are transformations which operate on the main mimetype (like
image), which will most likely take the subtype into regard, and those who only operate on a specific subtype
(like image/jpeg). You can use transformations on mimetypes for which the function was not defined for.
There is no security check for you selected the right transformation, so take care of what the output will be like.
The field Transformation options is a free-type textfield. You have to enter transform-function specific options
here. Usually the transforms can operate with default options, but it is generally a good idea to look up the
overview to see which options are necessary. Much like the ENUM/SET-Fields, you have to split up several
options using the format a,b,c,...(NOTE THE MISSING BLANKS). This is because internally the options
will be parsed as an array, leaving the first value the first element in the array, and so forth. If you want to specify
a MIME character set you can define it in the transformation_options. You have to put that outside of the pre-
defined options of the specific mime-transform, as the last value of the set. Use the format ; charset=XXX.
If you use a transform, for which you can specify 2 options and you want to append a character set, enter
first parameter,second parameter,charset=us-ascii. You can, however use the defaults for the parameters:
,,charset =us-ascii.
File structure
All specific transformations for mimetypes are defined through class files in the directory li-
braries/plugins/transformations/. Each of them extends a certain transformation abstract class declared in
libraries/plugins/transformations/abstract.
They are stored in files to ease up customization and easy adding of new transformations.
Because the user cannot enter own mimetypes, it is kept sure that transformations always work. It makes no sense to
apply a transformation to a mimetype the transform-function doesnt know to handle.
There is a file called transformations.lib.php that provides some basic functions which can be included by any other
transform function.
The file name convention is [Mimetype]_[Subtype]_[Transformation Name].class.php, while the
abtract class that it extends has the name [Transformation Name]TransformationsPlugin. All of the
methods that have to be implemented by a transformations plug-in are:
1. getMIMEType() and getMIMESubtype() in the main class;
2. getName(), getInfo() and applyTransformation() in the abstract class it extends.
The getMIMEType(), getMIMESubtype() and getName() methods return the name of the MIME type, MIME Subtype
and transformation accordingly. getInfo() returns the transformations description and possible options it may receive
and applyTransformation() is the method that does the actual work of the transformation plug-in.
Please see the libraries/plugins/transformations/TEMPLATE and libraries/plugins/transformations/TEMPLATE_ABSTRACT
files for adding your own transformation plug-in. You can also generate a new transformation plug-in (with or without
the abstract transformation class), by using scripts/transformations_generator_plugin.sh or
scripts/transformations_generator_main_class.sh.
The applyTransformation() method always gets passed three variables:
1. $buffer - Contains the text inside of the column. This is the text, you want to transform.
2. $options - Contains any user-passed options to a transform function as an array.
82 Chapter 5. User Guide

3. $meta - Contains an object with information about your column. The data is drawn from the output of the
mysql_fetch_field() function. This means, all object properties described on the manual page are available in
this variable and can be used to transform a column accordingly to unsigned/zerofill/not_null/... properties. The
$meta->mimetype variable contains the original MIME-type of the column (i.e. text/plain, image/jpeg etc.)
Bookmarks
Note: You need to have configured the phpMyAdmin configuration storage for using bookmarks feature.
Storing bookmarks
Any query you have executed can be stored as a bookmark on the page where the results are displayed. You will find
a button labeled Bookmark this query just at the end of the page. As soon as you have stored a bookmark, it is related
to the database you run the query on. You can now access a bookmark dropdown on each page, the query box appears
on for that database.
Variables inside bookmarks
You can also have, inside the query, placeholders for variables. This is done by inserting into the query SQL comments
between /* and */. Inside the comments, the special strings [VARIABLE{variable-number}] is used. Be
aware that the whole query minus the SQL comments must be valid by itself, otherwise you wont be able to store it
as a bookmark.
When you execute the bookmark, everything typed into the Variables input boxes on the query box page will replace
the strings /*[VARIABLE{variable-number}]*/ in your stored query.
Also remember, that everything else inside the /*[VARIABLE{variable-number}]*/ string for your query
will remain the way it is, but will be stripped of the /**/ chars. So you can use:
/*, [VARIABLE1] AS myname */
which will be expanded to
, VARIABLE1 as myname
in your query, where VARIABLE1 is the string you entered in the Variable 1 input box.
A more complex example. Say you have stored this query:
SELECT Name, Address FROM addresses WHERE 1 /* AND Name LIKE '%[VARIABLE1]%' */
Say, you now enter phpMyAdmin as the variable for the stored query, the full query will be:
SELECT Name, Address FROM addresses WHERE 1 AND Name LIKE '%phpMyAdmin%'
NOTE THE ABSENCE OF SPACES inside the /**/ construct. Any spaces inserted there will be later also inserted
as spaces in your query and may lead to unexpected results especially when using the variable expansion inside of a
LIKE expression.
5.2. Bookmarks 83
Browsing table using bookmark
When bookmark is named same as table, it will be used as query when browsing this table.
See also:
6.18 Bookmarks: Where can I store bookmarks? Why cant I see any bookmarks below the query box? What are these
variables for?, 6.22 Bookmarks: Can I execute a default bookmark automatically when entering Browse mode for a
table?
User management
User management is the process of controlling which users are allowed to connect to the MySQL server and what per-
missions they have on each database. phpMyAdmin does not handle user management, rather it passes the username
and password on to MySQL, which then determines whether a user is permitted to perform a particular action. Within
phpMyAdmin, administrators have full control over creating users, viewing and editing privileges for existing users,
and removing users.
Within phpMyAdmin, user management is controlled via the Users link from the main page. Users can be created,
edited, and removed.
Creating a new user
To create a new user, click the Add a new user link near the bottom of the Users page (you must be a superuser,
e.g., user root). Use the textboxes and drop-downs to configure the user to your particular needs. You can then
select whether to create a database for that user and grant specific global privileges. Once youve created the user (by
clicking Go), you can define that users permissions on a specific database (dont grant global privileges in that case).
In general, users do not need any global privileges (other than USAGE), only permissions for their specific database.
Editing an existing user
To edit an existing user, simply click the pencil icon to the right of that user in the Users page. You can then edit their
global- and database-specific privileges, change their password, or even copy those privileges to a new user.
Deleting a user
From the Users page, check the checkbox for the user you wish to remove, select whether or not to also remove any
databases of the same name (if they exist), and click Go.
Assigning privileges to user for a specific database
Users are assigned to databases by editing the user record (from the Users link on the home page) not from within the
Users link under the table. If you are creating a user specifically for a given table you will have to create the user first
(with no global privileges) and then go back and edit that user to add the table and privileges for the individual table.
Configurable menus and user groups
By enabling $cfg['Servers'][$i]['usergroups'] and $cfg['Servers'][$i]['usergroups']

you can customize what users will see in the phpMyAdmin navigation.

Warning: This feature only limits what a user sees, he is still able to use all the functions. So this can not be
considered as a security limitation. Should you want to limit what users can do, use MySQL privileges to achieve
that.
With this feature enabled, the User accounts management interface gains a second tab for managing User groups,
where you can define what each group will view (see image below) and you can then assign each user to one of these
groups. Users will be presented with a simplified user interface, which might be useful for inexperienced users who
could be overwhelmed by all the features phpMyAdmin provides.
Relations
phpMyAdmin allows relationships (similar to foreign keys) using MySQL-native (InnoDB) methods when available
and falling back on special phpMyAdmin-only features when needed. There are two ways of editing these relations,
with the relation view and the drag-and-drop designer both of which are explained on this page.
Note: You need to have configured the phpMyAdmin configuration storage for using phpMyAdmin only relations.
Technical info
Currently the only MySQL table type that natively supports relationships is InnoDB. When using an InnoDB table, ph-
pMyAdmin will create real InnoDB relations which will be enforced by MySQL no matter which application accesses
the database. In the case of any other table type, phpMyAdmin enforces the relations internally and those relations are
not applied to any other application.
5.4. Relations 85
Relation view
In order to get it working, you first have to properly create the [[pmadb|pmadb]]. Once that is setup, select a tables
Structure page. Below the table definition, a link called Relation view is shown. If you click that link, a page
will be shown that offers you to create a link to another table for any (most) fields. Only PRIMARY KEYS are shown
there, so if the field you are referring to is not shown, you most likely are doing something wrong. The drop-down at
the bottom is the field which will be used as the name for a record.
Relation view example

Lets say you have categories and links and one category can contain several links. Your table structure would be
something like this:
category.category_id (must be unique)
category.name
link.link_id
link.category_id
link.uri.
Open the relation view (below the table structure) page for the link table and for category_id field, you select cate-
gory.category_id as master record.
If you now browse the link table, the category_id field will be a clickable hyperlink to the proper category record. But
all you see is just the category_id, not the name of the category.
5.4. Relations 87
To fix this, open the relation view of the category table and in the drop down at the bottom, select name. If you now
browse the link table again and hover the mouse over the category_id hyperlink, the value from the related category
will be shown as tooltip.
Designer
The Designer feature is a graphical way of creating, editing, and displaying phpMyAdmin relations. These relations
are compatible with those created in phpMyAdmins relation view.
To use this feature, you need a properly configured phpMyAdmin configuration storage and must have the
$cfg['Servers'][$i]['table_coords'] configured.
To use the designer, select a databases structure page, then look for the Designer tab.
To export the view into PDF, you have to create PDF pages first. The Designer creates the layout, how the tables shall
be displayed. To finally export the view, you have to create this with a PDF page and select your layout, which you
have created with the designer.
See also:
6.8 How can I produce a PDF schema of my database?

Charts

Since phpMyAdmin version 3.4.0, you can easily generate charts from a SQL query by clicking the Display chart
link in the Query results operations area.
A window layer Display chart is shown in which you can customize the chart with the following options.
Chart type: Allows you choose the type of the chart. Supported types are bar charts, column charts, line
charts, spline charts, area charts, pie charts and timeline charts (only the chart types applicable for current series
selection are offered).
X-axis: Allows to choose the field for the main axis.
Series: Allows to choose series for the chart. You can choose multiple series.
Title: Allows specifying a title for the chart which is displayed above the chart.
X-axis and Y-axis labels: Allows specifying labels for axes.
Start row and number of rows: Allows generating charts only for a specified number of rows of the results set.
5.5. Charts 89
Chart implementation
Charts in phpMyAdmin are drawn using jqPlot jQuery library.
Examples
Pie chart
Query results for a simple pie chart can be generated with:
SELECT 'Food' AS 'expense',

1250 AS 'amount' UNION
SELECT 'Accommodation', 500 UNION
SELECT 'Travel', 720 UNION
SELECT 'Misc', 220
And the result of this query is:

expense anount
Food 1250
Accommodation 500
Travel 720
Misc 220
Choosing expense as the X-axis and amount in series:
Bar and column chart
Both bar charts and column chats support stacking. Upon selecting one of these types a checkbox is displayed to select
stacking.
Query results for a simple bar or column chart can be generated with:

SELECT
'ACADEMY DINOSAUR' AS 'title',
0.99 AS 'rental_rate',
20.99 AS 'replacement_cost' UNION
SELECT 'ACE GOLDFINGER', 4.99, 12.99 UNION
SELECT 'ADAPTATION HOLES', 2.99, 18.99 UNION
SELECT 'AFFAIR PREJUDICE', 2.99, 26.99 UNION
SELECT 'AFRICAN EGG', 2.99, 22.99

title rental_rate replacement_cost
ACADEMY DINOSAUR 0.99 20.99
ACE GOLDFINGER 4.99 12.99
ADAPTATION HOLES 2.99 18.99
AFFAIR PREJUDICE 2.99 26.99
AFRICAN EGG 2.99 22.99
Choosing title as the X-axis and rental_rate and replacement_cost as series:
Scatter chart
Scatter charts are useful in identifying the movement of one or more variable(s) compared to another variable.
Using the same data set from bar and column charts section and choosing replacement_cost as the X-axis and
rental_rate in series:
5.5. Charts 91
Line, spline and timeline charts
These charts can be used to illustrate trends in underlying data. Spline charts draw smooth lines while timeline charts
draw X-axis taking the distances between the dates/time into consideration.
Query results for a simple line, spline or timeline chart can be generated with:
SELECT
DATE('2006-01-08') AS 'date',
2056 AS 'revenue',
1378 AS 'cost' UNION
SELECT DATE('2006-01-09'), 1898, 2301 UNION
SELECT DATE('2006-01-15'), 1560, 600 UNION
SELECT DATE('2006-01-17'), 3457, 1565

date revenue cost
2016-01-08 2056 1378
2006-01-09 1898 2301
2006-01-15 1560 600
2006-01-17 3457 1565

5.5. Charts 93
Import and export
Import
To import data, go to the Import tab in phpMyAdmin. To import data into a specific database or table, open the
database or table before going to the Import tab.
In addition to the standard Import and Export tab, you can also import an SQL file directly by dragging and dropping
it from your local file manager to the phpMyAdmin interface in your web browser.
If you are having troubles importing big files, please consult 1.16 I cannot upload big dump files (memory, HTTP or
timeout problems)..
You can import using following methods:
Form based upload
Can be used with any supported format, also (b|g)zipped files, e.g., mydump.sql.gz .
Form based SQL Query
Can be used with valid SQL dumps.
Using upload directory
You can specify an upload directory on your web server where phpMyAdmin is installed, after up-
loading your file into this directory you can select this file in the import dialog of phpMyAdmin, see
$cfg['UploadDir'].
phpMyAdmin can import from several various commonly used formats.
CSV
Comma separated values format which is often used by spreadsheets or various other programs for export/import.

Note: When importing data into a table from a CSV file where the table has an auto_increment field, make the
auto_increment value for each record in the CSV field to be 0 (zero). This allows the auto_increment field to
populate correctly.
It is now possible to import a CSV file at the server or database level. Instead of having to create a table to import the
CSV file into, a best-fit structure will be determined for you and the data imported into it, instead. All other features,
requirements, and limitations are as before.
CSV using LOAD DATA
Similar to CSV, only using the internal MySQL parser and not the phpMyAdmin one.
ESRI Shape File
The ESRI shapefile or simply a shapefile is a popular geospatial vector data format for geographic information systems
software. It is developed and regulated by Esri as a (mostly) open specification for data interoperability among Esri
and other software products.
MediaWiki
MediaWiki files, which can be exported by phpMyAdmin (version 4.0 or later), can now also be imported. This is the
format used by Wikipedia to display tables.
Open Document Spreadsheet (ODS)
OpenDocument workbooks containing one or more spreadsheets can now be directly imported.
When importing an ODS speadsheet, the spreadsheet must be named in a specific way in order to make the import as
simple as possible.
Table name
During import, phpMyAdmin uses the sheet name as the table name; you should rename the sheet in your spreadsheet
program in order to match your existing table name (or the table you wish to create, though this is less of a concern
since you could quickly rename the new table from the Operations tab).
Column names
You should also make the first row of your spreadsheet a header with the names of the columns (this can be accom-
plished by inserting a new row at the top of your spreadsheet). When on the Import screen, select the checkbox for
The first line of the file contains the table column names; this way your newly imported data will go to the proper
columns.
Note: Formulas and calculations will NOT be evaluated, rather, their value from the most recent save will be loaded.
Please ensure that all values in the spreadsheet are as needed before importing it.
5.6. Import and export 95

SQL
SQL can be used to make any manipulation on data, it is also useful for restoring backed up data.
XML
XML files exported by phpMyAdmin (version 3.3.0 or later) can now be imported. Structures (databases, tables,
views, triggers, etc.) and/or data will be created depending on the contents of the file.
The supported xml schemas are not yet documented in this wiki.
Export
phpMyAdmin can export into text files (even compressed) on your local disk (or a special the webserver
$cfg['SaveDir'] folder) in various commonly used formats:
CodeGen
NHibernate file format. Planned versions: Java, Hibernate, PHP PDO, JSON, etc. So the preliminary name is codegen.
CSV
Comma separated values format which is often used by spreadsheets or various other programs for export/import.
CSV for Microsoft Excel
This is just preconfigured version of CSV export which can be imported into most English versions of Microsoft Excel.
Some localised versions (like Danish) are expecting ; instead of , as field separator.
Microsoft Word 2000
If youre using Microsoft Word 2000 or newer (or compatible such as OpenOffice.org), you can use this export.
JSON
JSON (JavaScript Object Notation) is a lightweight data-interchange format. It is easy for humans to read and write
and it is easy for machines to parse and generate.
Changed in version 4.7.0: The generated JSON structure has been changed in phpMyAdmin 4.7.0 to produce valid
JSON data.
The generated JSON is list of objects with following attributes:
type
Type of given object, can be one of:
header Export header containing comment and phpMyAdmin version.
database Start of a database marker, containing name of database.
table Table data export.

version
Used in header type and indicates phpMyAdmin version.
comment
Optional textual comment.
name
Object name - either table or database based on type.
database
Database name for table type.
data
Table content for table type.
Sample output:
[
{
"comment": "Export to JSON plugin for PHPMyAdmin",
"type": "header",
"version": "4.7.0-dev"
},
{
"name": "cars",
"type": "database"
},
{
"data": [
{
"car_id": "1",
"description": "Green Chrysler 300",
"make_id": "5",
"mileage": "113688",
"price": "13545.00",
"transmission": "automatic",
"yearmade": "2007"
}
],
"database": "cars",
"name": "cars",
"type": "table"
},
{
"data": [
{
"make": "Chrysler",
"make_id": "5"
}
],
"database": "cars",
"name": "makes",
"type": "table"
}
]
LaTeX
If you want to embed table data or structure in LaTeX, this is right choice for you.
5.6. Import and export 97

LaTeX is a typesetting system that is very suitable for producing scientific and mathematical documents of high
typographical quality. It is also suitable for producing all sorts of other documents, from simple letters to complete
books. LaTeX uses TeX as its formatting engine. Learn more about TeX and LaTeX on the Comprehensive TeX
Archive Network also see the short description od TeX.
The output needs to be embedded into a LaTeX document before it can be rendered, for example in following docu-
ment:
\documentclass{article}
\title{phpMyAdmin SQL output}
\author{}
\usepackage{longtable,lscape}
\date{}
\setlength{\parindent}{0pt}
\usepackage[left=2cm,top=2cm,right=2cm,nohead,nofoot]{geometry}
\pdfpagewidth 210mm
\pdfpageheight 297mm
\begin{document}
\maketitle
% insert phpMyAdmin LaTeX Dump here
\end{document}
MediaWiki
Both tables and databases can be exported in the MediaWiki format, which is used by Wikipedia to display tables. It
can export structure, data or both, including table names or headers.
OpenDocument Spreadsheet
Open standard for spreadsheet data, which is being widely adopted. Many recent spreadsheet programs, such as
LibreOffice, OpenOffice or Google Docs can handle this format. Additionally, some versions of Microsoft Excel can
be adapted to use the OpenDocument Formats through helpers like <http://odf-converter.sourceforge.net/>.
OpenDocument Text
New standard for text data which is being widely addopted. Most recent word processors (such as OpenOffice.org,
AbiWord or KWord) can handle this.
PDF
For presentation purposes, non editable PDF might be best choice for you.
PHP Array
You can generate a php file which will declare a multidimensional array with the contents of the selected table or
database.

SQL
Export in SQL can be used to restore your database, thus it is useful for backing up.
The option Maximal length of created query seems to be undocumented. But experiments has shown that it splits
large extended INSERTS so each one is no bigger than the given number of bytes (or characters?). Thus when
importing the file, for large tables you avoid the error Got a packet bigger than max_allowed_packet bytes.
See also:
https://dev.mysql.com/doc/refman/5.7/en/packet-too-large.html
Data Options
Complete inserts adds the column names to the SQL dump. This parameter improves the readability and reliability
of the dump. Adding the column names increases the size of the dump, but when combined with Extended inserts its
negligible.
Extended inserts combines multiple rows of data into a single INSERT query. This will significantly decrease filesize
for large SQL dumps, increases the INSERT speed when imported, and is generally recommended.
See also:
http://www.scriptalicious.com/blog/2009/04/complete-inserts-or-extended-inserts-in-phpmyadmin/
Texy!
Texy! markup format. You can see example on Texy! demo.
XML
Easily parsable export for use with custom scripts.

Changed in version 3.3.0: The XML schema used has changed as of version 3.3.0
YAML
YAML is a data serialization format which is both human readable and computationally powerful ( <http://www.yaml.
org> ).
Other sources of information
Printed Book
The definitive guide to using phpMyAdmin is the book Mastering phpMyAdmin for Effective MySQL Management
by Marc Delisle. You can get information on that book and other officially endorsed books at the phpMyAdmin site.
Tutorials
Third party tutorials and articles which you might find interesting:
5.7. Other sources of information 99

Cesky (Czech)
Seril o phpMyAdminovi
English
Having fun with phpMyAdmins MIME-transformations & PDF-features

Learning SQL Using phpMyAdmin (old tutorial)
Install and configure phpMyAdmin on IIS
(Russian)
Russian server about phpMyAdmin

CHAPTER 6
FAQ - Frequently Asked Questions
Please have a look at our Link section on the official phpMyAdmin homepage for in-depth coverage of phpMyAdmins
features and or interface.
Server
1.1 My server is crashing each time a specific action is required or phpMyAdmin

sends a blank page or a page full of cryptic characters to my browser, what
can I do?
Try to set the $cfg['OBGzip'] directive to false in your config.inc.php file and the zlib.
output_compression directive to Off in your php configuration file.
1.2 My Apache server crashes when using phpMyAdmin.
You should first try the latest versions of Apache (and possibly MySQL). If your server keeps crashing, please ask for
help in the various Apache support groups.
See also:
1.1 My server is crashing each time a specific action is required or phpMyAdmin sends a blank page or a page full of
cryptic characters to my browser, what can I do?
1.3 (withdrawn).
1.4 Using phpMyAdmin on IIS, Im displayed the error message: The specified CGI
application misbehaved by not returning a complete set of HTTP headers ....
You just forgot to read the install.txt file from the PHP distribution. Have a look at the last message in this PHP bug
report #12061 from the official PHP bug database.
101
1.5 Using phpMyAdmin on IIS, Im facing crashes and/or many error messages with
the HTTP.
This is a known problem with the PHP ISAPI filter: its not so stable. Please use instead the cookie authentication
mode.
1.6 I cant use phpMyAdmin on PWS: nothing is displayed!
This seems to be a PWS bug. Filippo Simoncini found a workaround (at this time there is no better fix): remove or
comment the DOCTYPE declarations (2 lines) from the scripts libraries/Header.class.php and index.
php.
1.7 How can I gzip a dump or a CSV export? It does not seem to work.
This feature is based on the gzencode() PHP function to be more independent of the platform (Unix/Windows,
Safe Mode or not, and so on). So, you must have Zlib support (--with-zlib).
1.8 I cannot insert a text file in a table, and I get an error about safe mode being in
effect.
Your uploaded file is saved by PHP in the upload dir, as defined in php.ini by the variable upload_tmp_dir
(usually the system default is /tmp). We recommend the following setup for Apache servers running in safe mode, to
enable uploads of files while being reasonably secure:
create a separate directory for uploads: mkdir /tmp/php
give ownership to the Apache servers user.group: chown apache.apache /tmp/php
give proper permission: chmod 600 /tmp/php
put upload_tmp_dir = /tmp/php in php.ini
restart Apache
1.9 (withdrawn).
1.10 Im having troubles when uploading files with phpMyAdmin running on a se-
cure server. My browser is Internet Explorer and Im using the Apache
server.
As suggested by Rob M in the phpWizard forum, add this line to your httpd.conf :
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
It seems to clear up many problems between Internet Explorer and SSL.
1.11 I get an open_basedir restriction while uploading a file from the import tab.
Since version 2.2.4, phpMyAdmin supports servers with open_basedir restrictions. However you need to create tem-
porary directory and configure it as $cfg['TempDir']. The uploaded files will be moved there, and after execution
of your SQL commands, removed.
102 Chapter 6. FAQ - Frequently Asked Questions

1.12 I have lost my MySQL root password, what can I do?
phpMyAdmin does authenticate against MySQL server youre using, so to recover from phpMyAdmin password loss,
you need to recover at MySQL level.
The MySQL manual explains how to reset the permissions.
If you are using MySQL server installed by your hosting provider, please contact their support to recover the password
for you.
1.13 (withdrawn).
1.14 (withdrawn).
1.15 I have problems with mysql.user column names.
In previous MySQL versions, the User and Password columns were named user and password. Please modify
your column names to align with current standards.
1.16 I cannot upload big dump files (memory, HTTP or timeout problems).
Starting with version 2.7.0, the import engine has been rewritten and these problems should not occur. If possible,
upgrade your phpMyAdmin to the latest version to take advantage of the new import features.
The first things to check (or ask your host provider to check) are the values of max_execution_time,
upload_max_filesize, memory_limit and post_max_size in the php.ini configuration file. All of
these three settings limit the maximum size of data that can be submitted and handled by PHP. Please note that
post_max_size needs to be larger than upload_max_filesize. There exist several workarounds if your
upload is too big or your hosting provider is unwilling to change the settings:
Look at the $cfg['UploadDir'] feature. This allows one to upload a file to the server via scp, ftp, or your
favorite file transfer method. PhpMyAdmin is then able to import the files from the temporary directory. More
information is available in the Configuration of this document.
Using a utility (such as BigDump) to split the files before uploading. We cannot support this or any third party
applications, but are aware of users having success with it.
If you have shell (command line) access, use MySQL to import the files directly. You can do this by issuing the
source command from within MySQL:
source filename.sql;
1.17 Which Database versions does phpMyAdmin support?
For MySQL, versions 5.5 and newer are supported. For older MySQL versions, our Downloads page offers older
phpMyAdmin versions (which may have become unsupported).
For MariaDB, versions 5.5 and newer are supported.
6.1. Server 103

1.17a I cannot connect to the MySQL server. It always returns the error message,
Client does not support authentication protocol requested by server; con-
sider upgrading MySQL client
You tried to access MySQL with an old MySQL client library. The version of your MySQL client library can be
checked in your phpinfo() output. In general, it should have at least the same minor version as your server - as
mentioned in 1.17 Which Database versions does phpMyAdmin support?. This problem is generally caused by using
MySQL version 4.1 or newer. MySQL changed the authentication hash and your PHP is trying to use the old method.
The proper solution is to use the mysqli extension with the proper client library to match your MySQL installation.
More information (and several workarounds) are located in the MySQL Documentation.
1.18 (withdrawn).
1.19 I cant run the display relations feature because the script seems not to know
the font face Im using!
The TCPDF library were using for this feature requires some special files to use font faces. Please refers to the
TCPDF manual to build these files.
1.20 I receive an error about missing mysqli and mysql extensions.
To connect to a MySQL server, PHP needs a set of MySQL functions called MySQL extension. This extension
may be part of the PHP distribution (compiled-in), otherwise it needs to be loaded dynamically. Its name is probably
mysqli.so or php_mysqli.dll. phpMyAdmin tried to load the extension but failed. Usually, the problem is solved by
installing a software package called PHP-MySQL or something similar.
There are currently two interfaces PHP provides as MySQL extensions - mysql and mysqli. The mysqli is tried
first, because its the best one.
This problem can be also caused by wrong paths in the php.ini or using wrong php.ini.
Make sure that the extension files do exist in the folder which the extension_dir points to and that the corre-
sponding lines in your php.ini are not commented out (you can use phpinfo() to check current setup):
[PHP]
; Directory in which the loadable extensions (modules) reside.

extension_dir = "C:/Apache2/modules/php/ext"
The php.ini can be loaded from several locations (especially on Windows), so please check youre updating the
correct one. If using Apache, you can tell it to use specific path for this file using PHPIniDir directive:
LoadFile "C:/php/php5ts.dll"
LoadModule php5_module "C:/php/php5apache2_2.dll"
<IfModule php5_module>
PHPIniDir "C:/PHP"
<Location>
AddType text/html .php
AddHandler application/x-httpd-php .php
</Location>
</IfModule>
In some rare cases this problem can be also caused by other extensions loaded in PHP which prevent MySQL exten-
sions to be loaded. If anything else fails, you can try commenting out extensions for other databses from php.ini.

1.21 I am running the CGI version of PHP under Unix, and I cannot log in using
cookie auth.
In php.ini, set mysql.max_links higher than 1.
1.22 I dont see the Location of text file field, so I cannot upload.
This is most likely because in php.ini, your file_uploads parameter is not set to on.
1.23 Im running MySQL on a Win32 machine. Each time I create a new table the
table and column names are changed to lowercase!
This happens because the MySQL directive lower_case_table_names defaults to 1 (ON) in the Win32 version
of MySQL. You can change this behavior by simply changing the directive to 0 (OFF): Just edit your my.ini file that
should be located in your Windows directory and add the following line to the group [mysqld]:
set-variable = lower_case_table_names=0
Note: Forcing this variable to 0 with lower-case-table-names=0 on a case-insensitive filesystem and access MyISAM
tablenames using different lettercases, index corruption may result.
Next, save the file and restart the MySQL service. You can always check the value of this directive using the query
SHOW VARIABLES LIKE 'lower_case_table_names';
See also:
Identifier Case Sensitivity in the MySQL Reference Manual
1.24 (withdrawn).
1.25 I am running Apache with mod_gzip-1.3.26.1a on Windows XP, and I get prob-
lems, such as undefined variables when I run a SQL query.
A tip from Jose Fandos: put a comment on the following two lines in httpd.conf, like this:
# mod_gzip_item_include file \.php$

# mod_gzip_item_include mime "application/x-httpd-php.*"
as this version of mod_gzip on Apache (Windows) has problems handling PHP scripts. Of course you have to restart
Apache.
1.26 I just installed phpMyAdmin in my document root of IIS but I get the error No
input file specified when trying to run phpMyAdmin.
This is a permission problem. Right-click on the phpmyadmin folder and choose properties. Under the tab Security,
click on Add and select the user IUSR_machine from the list. Now set his permissions and it should work.
6.1. Server 105

1.27 I get empty page when I want to view huge page (eg. db_structure.php with
plenty of tables).
This was caused by a PHP bug that occur when GZIP output buffering is enabled. If you turn off it (by
$cfg['OBGzip'] in config.inc.php), it should work. This bug will has been fixed in PHP 5.0.0.
1.28 My MySQL server sometimes refuses queries and returns the message Error-
code: 13. What does this mean?
This can happen due to a MySQL bug when having database / table names with upper case characters although
lower_case_table_names is set to 1. To fix this, turn off this directive, convert all database and table names to
lower case and turn it on again. Alternatively, theres a bug-fix available starting with MySQL 3.23.56 / 4.0.11-gamma.
1.29 When I create a table or modify a column, I get an error and the columns are
duplicated.
It is possible to configure Apache in such a way that PHP has problems interpreting .php files.
The problems occur when two different (and conflicting) set of directives are used:
SetOutputFilter PHP
SetInputFilter PHP
and
AddType application/x-httpd-php .php
In the case we saw, one set of directives was in /etc/httpd/conf/httpd.conf, while the other set was in
/etc/httpd/conf/addon-modules/php.conf. The recommended way is with AddType, so just comment
out the first set of lines and restart Apache:
#SetOutputFilter PHP
#SetInputFilter PHP
1.30 I get the error navigation.php: Missing hash.
This problem is known to happen when the server is running Turck MMCache but upgrading MMCache to version
2.3.21 solves the problem.
1.31 Which PHP versions does phpMyAdmin support?
Since release 4.5, phpMyAdmin supports only PHP 5.5 and newer. Since release 4.1 phpMyAdmin supports only PHP
5.3 and newer. For PHP 5.2 you can use 4.0.x releases.
PHP 7 is supported since phpMyAdmin 4.6, PHP 7.1 is supported since 4.6.5.
phpMyAdmin also works fine with HHVM.

1.32 Can I use HTTP authentication with IIS?
Yes. This procedure was tested with phpMyAdmin 2.6.1, PHP 4.3.9 in ISAPI mode under IIS 5.1.
1. In your php.ini file, set cgi.rfc2616_headers = 0
2. In Web Site Properties -> File/Directory Security -> Anonymous Access dialog
box, check the Anonymous access checkbox and uncheck any other checkboxes (i.e. uncheck Basic
authentication, Integrated Windows authentication, and Digest if its enabled.) Click
OK.
3. In Custom Errors, select the range of 401;1 through 401;5 and click the Set to Default button.
See also:
RFC 2616
1.33 (withdrawn).
1.34 Can I access directly to database or table pages?
Yes. Out of the box, you can use URL like http://server/phpMyAdmin/index.php?
server=X&db=database&table=table&target=script. For server you use the server number
which refers to the order of the server paragraph in config.inc.php. Table and script parts are optional. If
you want http://server/phpMyAdmin/database[/table][/script] URL, you need to do some
configuration. Following lines apply only for Apache web server. First make sure, that you have enabled some
features within global configuration. You need Options SymLinksIfOwnerMatch and AllowOverride
FileInfo enabled for directory where phpMyAdmin is installed and you need mod_rewrite to be enabled. Then
you just need to create following .htaccess file in root folder of phpMyAdmin installation (dont forget to change
directory name inside of it):
RewriteEngine On
RewriteBase /path_to_phpMyAdmin
RewriteRule ^([a-zA-Z0-9_]+)/([a-zA-Z0-9_]+)/([a-z_]+\.php)$ index.php?db=$1&table=$2&
target=$3 [R]
RewriteRule ^([a-zA-Z0-9_]+)/([a-z_]+\.php)$ index.php?db=$1&target=$2 [R]

RewriteRule ^([a-zA-Z0-9_]+)/([a-zA-Z0-9_]+)$ index.php?db=$1&table=$2 [R]
RewriteRule ^([a-zA-Z0-9_]+)$ index.php?db=$1 [R]
1.35 Can I use HTTP authentication with Apache CGI?
Yes. However you need to pass authentication variable to CGI using following rewrite rule:
RewriteEngine On
RewriteRule .* - [E=REMOTE_USER:%{HTTP:Authorization},L]
1.36 I get an error 500 Internal Server Error.
There can be many explanations to this and a look at your servers error log file might give a clue.
6.1. Server 107

1.37 I run phpMyAdmin on cluster of different machines and password encryption

in cookie auth doesnt work.
If your cluster consist of different architectures, PHP code used for encryption/decryption wont work correct. This
is caused by use of pack/unpack functions in code. Only solution is to use mcrypt extension which works fine in this
case.
1.38 Can I use phpMyAdmin on a server on which Suhosin is enabled?
Yes but the default configuration values of Suhosin are known to cause problems with some operations, for example
editing a table with many columns and no primary key or with textual primary key.
Suhosin configuration might lead to malfunction in some cases and it can not be fully avoided as phpMyAdmin is kind
of application which needs to transfer big amounts of columns in single HTTP request, what is something what Suhosin
tries to prevent. Generally all suhosin.request.*, suhosin.post.* and suhosin.get.* directives can
have negative effect on phpMyAdmin usability. You can always find in your error logs which limit did cause dropping
of variable, so you can diagnose the problem and adjust matching configuration variable.
The default values for most Suhosin configuration options will work in most scenarios, however you might want to
adjust at least following parameters:
suhosin.request.max_vars should be increased (eg. 2048)
suhosin.post.max_vars should be increased (eg. 2048)
suhosin.request.max_array_index_length should be increased (eg. 256)
suhosin.post.max_array_index_length should be increased (eg. 256)
suhosin.request.max_totalname_length should be increased (eg. 8192)
suhosin.post.max_totalname_length should be increased (eg. 8192)
suhosin.get.max_value_length should be increased (eg. 1024)
suhosin.sql.bailout_on_error needs to be disabled (the default)
suhosin.log.* should not include SQL, otherwise you get big slowdown
suhosin.sql.union must be disabled (which is the default).
suhosin.sql.multiselect must be disabled (which is the default).
suhosin.sql.comment must be disabled (which is the default).
To further improve security, we also recommend these modifications:
suhosin.executor.include.max_traversal should be enabled as a mitigation against local file inclusion attacks.
We suggest setting this to 2 as ../ is used with the ReCaptcha library.
suhosin.cookie.encrypt should be enabled.
suhosin.executor.disable_emodifier should be enabled.
You can also disable the warning using the $cfg['SuhosinDisableWarning'].
1.39 When I try to connect via https, I can log in, but then my connection is redi-
rected back to http. What can cause this behavior?
This is caused by the fact that PHP scripts have no knowledge that the site is using https. Depending on used webserver,
you should configure it to let PHP know about URL and scheme used to access it.

For example in Apache ensure that you have enabled SSLOptions and StdEnvVars in the configuration.
See also:
<https://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
1.40 When accessing phpMyAdmin via an Apache reverse proxy, cookie login does
not work.
To be able to use cookie auth Apache must know that it has to rewrite the set-cookie headers. Example from the
Apache 2.2 documentation:
ProxyPass /mirror/foo/ http://backend.example.com/
ProxyPassReverse /mirror/foo/ http://backend.example.com/
ProxyPassReverseCookieDomain backend.example.com public.example.com
ProxyPassReverseCookiePath / /mirror/foo/
Note: if the backend url looks like http://server/~user/phpmyadmin, the tilde (~) must be url encoded as
%7E in the ProxyPassReverse* lines. This is not specific to phpmyadmin, its just the behavior of Apache.
ProxyPass /mirror/foo/ http://backend.example.com/~user/phpmyadmin
ProxyPassReverse /mirror/foo/ http://backend.example.com/%7Euser/phpmyadmin
ProxyPassReverseCookiePath /%7Euser/phpmyadmin /mirror/foo
See also:
<https://httpd.apache.org/docs/2.2/mod/mod_proxy.html>, $cfg['PmaAbsoluteUri']
1.41 When I view a database and ask to see its privileges, I get an error about an
unknown column.
The MySQL servers privilege tables are not up to date, you need to run the mysql_upgrade command on the
server.
1.42 How can I prevent robots from accessing phpMyAdmin?
You can add various rules to .htaccess to filter access based on user agent field. This is quite easy to circumvent, but
could prevent at least some robots accessing your installation.
RewriteEngine on
# Allow only GET and POST verbs

RewriteCond %{REQUEST_METHOD} !^(GET|POST)$ [NC,OR]
# Ban Typical Vulnerability Scanners and others

# Kick out Script Kiddies
RewriteCond %{HTTP_USER_AGENT} ^(java|curl|wget).* [NC,OR]
RewriteCond %{HTTP_USER_AGENT} ^.*(libwww-
perl|curl|wget|python|nikto|wkito|pikto|scan|acunetix).* [NC,OR]
RewriteCond %{HTTP_USER_AGENT} ^.
*(winhttp|HTTrack|clshttp|archiver|loader|email|harvest|extract|grab|miner).* [NC,
OR]
# Ban Search Engines, Crawlers to your administrative panel

# No reasons to access from bots
6.1. Server 109

# Ultimately Better than the useless robots.txt

# Did google respect robots.txt?
# Try google: intitle:phpMyAdmin intext:"Welcome to phpMyAdmin *.*.*" intext:"Log in"
-wiki -forum -forums -questions intext:"Cookies must be enabled"
RewriteCond %{HTTP_USER_AGENT} ^.*(AdsBot-Google|ia_archiver|Scooter|Ask.

Jeeves|Baiduspider|Exabot|FAST.Enterprise.Crawler|FAST-WebCrawler|www\.neomo\.
de|Gigabot|Mediapartners-Google|Google.Desktop|Feedfetcher-Google|Googlebot|heise-
IT-Markt-Crawler|heritrix|ibm.com\cs/
crawler|ICCrawler|ichiro|MJ12bot|MetagerBot|msnbot-NewsBlogs|msnbot|msnbot-media|NG-
Search|lucene.apache.org|NutchCVS|OmniExplorer_Bot|online.link.
validator|psbot0|Seekbot|Sensis.Web.Crawler|SEO.search.Crawler|Seoma.\[SEO.
Crawler\]|SEOsearch|Snappy|www.urltrends.com|www.tkl.iis.u-tokyo.ac.jp/~
crawler|SynooBot|[email protected]|TurnitinBot|voyager|W3.SiteSearch.
Crawler|W3C-checklink|W3C_Validator|www.WISEnutbot.com|yacybot|Yahoo-
MMCrawler|Yahoo\!.DE.Slurp|Yahoo\!.Slurp|YahooSeeker).* [NC]
RewriteRule .* - [F]
1.43 Why cant I display the structure of my table containing hundreds of columns?
Because your PHPs memory_limit is too low; adjust it in php.ini.
1.44 How can I reduce the installed size of phpMyAdmin on disk?
Some users have requested to be able to reduce the size of the phpMyAdmin installation. This is not recommended
and could lead to confusion over missing features, but can be done. A list of files and corresponding functionality
which degrade gracefully when removed include:
./vendor/tecnickcom/tcpdf folder (exporting to PDF)
./locale/ folder, or unused subfolders (interface translations)
Any unused themes in ./themes/
./js/jquery/src/ (included for licensing reasons)
./js/line_counts.php
./doc/ (documentation)
./setup/ (setup script)
./examples/
./sql/ (SQL scripts to configure advanced functionality)
./js/openlayers/ (GIS visualization)
Configuration
2.1 The error message Warning: Cannot add header information - headers already
sent by ... is displayed, whats the problem?
Edit your config.inc.php file and ensure there is nothing (I.E. no blank lines, no spaces, no characters...) neither
before the <?php tag at the beginning, neither after the ?> tag at the end. We also got a report from a user under IIS,

that used a zipped distribution kit: the file libraries/Config.php contained an end-of-line character (hex 0A)
at the end; removing this character cleared his errors.
2.2 phpMyAdmin cant connect to MySQL. Whats wrong?
Either there is an error with your PHP setup or your username/password is wrong. Try to make a small script which
uses mysql_connect and see if it works. If it doesnt, it may be you havent even compiled MySQL support into PHP.
2.3 The error message Warning: MySQL Connection Failed: Cant connect to local
MySQL server through socket /tmp/mysql.sock (111) ... is displayed. What
can I do?
The error message can also be: Error #2002 - The server is not responding (or the local MySQL servers socket is not
correctly configured).
First, you need to determine what socket is being used by MySQL. To do this, connect to your server and
go to the MySQL bin directory. In this directory there should be a file named mysqladmin. Type ./
mysqladmin variables, and this should give you a bunch of info about your MySQL server, including the
socket (/tmp/mysql.sock, for example). You can also ask your ISP for the connection info or, if youre hosting your
own, connect from the mysql command-line client and type status to get the connection type and socket or port
number.
Then, you need to tell PHP to use this socket. You can do this for all PHP in the php.ini or for phpMyAdmin only
in the config.inc.php. For example: $cfg['Servers'][$i]['socket'] Please also make sure that the
permissions of this file allow to be readable by your webserver.
On my RedHat-Box the socket of MySQL is /var/lib/mysql/mysql.sock. In your php.ini you will find a line
mysql.default_socket = /tmp/mysql.sock
change it to
mysql.default_socket = /var/lib/mysql/mysql.sock
Then restart apache and it will work.

Have also a look at the corresponding section of the MySQL documentation.
2.4 Nothing is displayed by my browser when I try to run phpMyAdmin, what can I
do?
Try to set the $cfg['OBGzip'] directive to false in the phpMyAdmin configuration file. It helps sometime.
Also have a look at your PHP version number: if it contains b or alpha it means youre running a testing version
of PHP. Thats not a so good idea, please upgrade to a plain revision.
2.5 Each time I want to insert or change a row or drop a database or a table, an error
404 (page not found) is displayed or, with HTTP or cookie authentication, Im
asked to log in again. Whats wrong?
Check your webserver setup if it correctly fills in either PHP_SELF or REQUEST_URI variables.
If you are running phpMyAdmin behind reverse proxy, please set the $cfg['PmaAbsoluteUri'] directive in the
phpMyAdmin configuration file to match your setup.
6.2. Configuration 111

2.6 I get an Access denied for user: root@localhost (Using password: YES)-
error when trying to access a MySQL-Server on a host which is port-
forwarded for my localhost.
When you are using a port on your localhost, which you redirect via port-forwarding to another host, MySQL is not
resolving the localhost as expected. Erik Wasser explains: The solution is: if your host is localhost MySQL (the
command line tool mysql as well) always tries to use the socket connection for speeding up things. And that doesnt
work in this configuration with port forwarding. If you enter 127.0.0.1 as hostname, everything is right and MySQL
uses the TCP connection.
2.7 Using and creating themes
Themes are configured with $cfg['ThemeManager'] and $cfg['ThemeDefault']. Under ./themes/,

you should not delete the directory pmahomme or its underlying structure, because this is the system theme used by
phpMyAdmin. pmahomme contains all images and styles, for backwards compatibility and for all themes that would
not include images or css-files. If $cfg['ThemeManager'] is enabled, you can select your favorite theme on the
main page. Your selected theme will be stored in a cookie.
To create a theme:
make a new subdirectory (for example your_theme_name) under ./themes/.
copy the files and directories from pmahomme to your_theme_name
edit the css-files in your_theme_name/css
put your new images in your_theme_name/img
edit layout.inc.php in your_theme_name
edit info.inc.php in your_theme_name to contain your chosen theme name, that will be visible in user
interface
make a new screenshot of your theme and save it under your_theme_name/screen.png
In theme directory there is file info.inc.php which contains theme verbose name, theme generation and theme
version. These versions and generations are enumerated from 1 and do not have any direct dependence on phpMyAd-
min version. Themes within same generation should be backwards compatible - theme with version 2 should work in
phpMyAdmin requiring version 1. Themes with different generation are incompatible.
If you do not want to use your own symbols and buttons, remove the directory img in your_theme_name. php-
MyAdmin will use the default icons and buttons (from the system-theme pmahomme).
2.8 I get Missing parameters errors, what can I do?
Here are a few points to check:

In config.inc.php, try to leave the $cfg['PmaAbsoluteUri'] directive empty. See also 4.7 Authen-
tication window is displayed more than once, why?.
Maybe you have a broken PHP installation or you need to upgrade your Zend Optimizer. See <https://bugs.php.
net/bug.php?id=31134>.
If you are using Hardened PHP with the ini directive varfilter.max_request_variables set to the
default (200) or another low value, you could get this error if your table has a high number of columns. Adjust
this setting accordingly. (Thanks to Klaus Dorninger for the hint).
In the php.ini directive arg_separator.input, a value of ; will cause this error. Replace it with
&;.

If you are using Suhosin, you might want to increase request limits.
The directory specified in the php.ini directive session.save_path does not exist or is read-only (this
can be caused by bug in the PHP installer).
2.9 Seeing an upload progress bar
To be able to see a progress bar during your uploads, your server must have the APC extension, the uploadprogress
one, or you must be running PHP 5.4.0 or higher. Moreover, the JSON extension has to be enabled in your PHP.
If using APC, you must set apc.rfc1867 to on in your php.ini.
If using PHP 5.4.0 or higher, you must set session.upload_progress.enabled to 1 in your php.ini.
However, starting from phpMyAdmin version 4.0.4, session-based upload progress has been temporarily deactivated
due to its problematic behavior.
See also:
RFC 1867
Known limitations
3.1 When using HTTP authentication, a user who logged out can not log in again in
with the same nick.
This is related to the authentication mechanism (protocol) used by phpMyAdmin. To bypass this problem: just close
all the opened browser windows and then go back to phpMyAdmin. You should be able to log in again.
3.2 When dumping a large table in compressed mode, I get a memory limit error or
a time limit error.
Compressed dumps are built in memory and because of this are limited to phps memory limit. For gzip/bzip2 exports
this can be overcome since 2.5.4 using $cfg['CompressOnFly'] (enabled by default). zip exports can not be
handled this way, so if you need zip files for larger dump, you have to use another way.
3.3 With InnoDB tables, I lose foreign key relationships when I rename a table or a
column.
This is an InnoDB bug, see <https://bugs.mysql.com/bug.php?id=21704>.
3.4 I am unable to import dumps I created with the mysqldump tool bundled with
the MySQL server distribution.
The problem is that older versions of mysqldump created invalid comments like this:
-- MySQL dump 8.22

--
-- Host: localhost Database: database
---------------------------------------------------------
-- Server version 3.23.54
6.3. Known limitations 113

The invalid part of the code is the horizontal line made of dashes that appears once in every
dump created with mysqldump. If you want to run your dump you have to turn it into valid
MySQL. This means, you have to add a whitespace after the first two dashes of the line or
add a # before it: -- ------------------------------------------------------- or
#---------------------------------------------------------
3.5 When using nested folders, multiple hierarchies are displayed in a wrong man-
ner.
Please note that you should not use the separating string multiple times without any characters between them, or at the
beginning/end of your table name. If you have to, think about using another TableSeparator or disabling that feature.
See also:
$cfg['NavigationTreeTableSeparator']
3.6 (withdrawn).
3.7 I have table with many (100+) columns and when I try to browse table I get series
of errors like Warning: unable to parse url. How can this be fixed?
Your table neither have a primary key nor an unique key, so we must use a long expression to identify this row. This
causes problems to parse_url function. The workaround is to create a primary key or unique key.
3.8 I cannot use (clickable) HTML-forms in columns where I put a MIME-

Transformation onto!
Due to a surrounding form-container (for multi-row delete checkboxes), no nested forms can be put inside the table
where phpMyAdmin displays the results. You can, however, use any form inside of a table if keep the parent form-
container with the target to tbl_row_delete.php and just put your own input-elements inside. If you use a custom submit
input field, the form will submit itself to the displaying page again, where you can validate the $HTTP_POST_VARS
in a transformation. For a tutorial on how to effectively use transformations, see our Link section on the official
phpMyAdmin-homepage.
3.9 I get error messages when using sql_mode=ANSI for the MySQL server.
When MySQL is running in ANSI-compatibility mode, there are some major differences in how SQL is structured
(see <https://dev.mysql.com/doc/refman/5.7/en/sql-mode.html>). Most important of all, the quote-character () is in-
terpreted as an identifier quote character and not as a string quote character, which makes many internal phpMyAdmin
operations into invalid SQL statements. There is no workaround to this behaviour. News to this item will be posted in
issue #7383.
3.10 Homonyms and no primary key: When the results of a SELECT display
more that one column with the same value (for example SELECT lastname
from employees where firstname like 'A%' and two Smith values
are displayed), if I click Edit I cannot be sure that I am editing the intended
row.
Please make sure that your table has a primary key, so that phpMyAdmin can use it for the Edit and Delete links.

3.11 The number of rows for InnoDB tables is not correct.
phpMyAdmin uses a quick method to get the row count, and this method only returns an approximate count in the
case of InnoDB tables. See $cfg['MaxExactCount'] for a way to modify those results, but this could have
a serious impact on performance. However, one can easily replace the approximate row count with exact count by
simply clicking on the approximate count. This can also be done for all tables at once by clicking on the rows sum
displayed at the bottom.
See also:
$cfg['MaxExactCount']
3.12 (withdrawn).
3.13 I get an error when entering USE followed by a db name containing an hyphen.
The tests I have made with MySQL 5.1.49 shows that the API does not accept this syntax for the USE command.
3.14 I am not able to browse a table when I dont have the right to SELECT one of
the columns.
This has been a known limitation of phpMyAdmin since the beginning and its not likely to be solved in the future.
3.15 (withdrawn).
3.16 (withdrawn).
3.17 (withdrawn).
3.18 When I import a CSV file that contains multiple tables, they are lumped together
into a single table.
There is no reliable way to differentiate tables in CSV format. For the time being, you will have to break apart CSV
files containing multiple tables.
3.19 When I import a file and have phpMyAdmin determine the appropriate data
structure it only uses int, decimal, and varchar types.
Currently, the import type-detection system can only assign these MySQL types to columns. In future, more will likely
be added but for the time being you will have to edit the structure to your liking post-import. Also, you should note the
fact that phpMyAdmin will use the size of the largest item in any given column as the column size for the appropriate
type. If you know you will be adding larger items to that column then you should manually adjust the column sizes
accordingly. This is done for the sake of efficiency.
3.20 After upgrading, some bookmarks are gone or their content cannot be shown.
At some point, the character set used to store bookmark content has changed. Its better to recreate your bookmark
from the newer phpMyAdmin version.
6.3. Known limitations 115

3.21 I am unable to log in with a username containing unicode characters such as

.
This can happen if MySQL server is not configured to use utf-8 as default charset. This is a limitation of how PHP
and the MySQL server interact; there is no way for PHP to set the charset before authenticating.
See also:
phpMyAdmin issue 12232, MySQL documentation note
ISPs, multi-user installations
4.1 Im an ISP. Can I setup one central copy of phpMyAdmin or do I need to install
it for each customer?
Since version 2.0.3, you can setup a central copy of phpMyAdmin for all your users. The development of this feature
was kindly sponsored by NetCologne GmbH. This requires a properly setup MySQL user management and phpMyAd-
min HTTP or cookie authentication.
See also:
4.2 Whats the preferred way of making phpMyAdmin secure against evil access?
This depends on your system. If youre running a server which cannot be accessed by other people, its sufficient to
use the directory protection bundled with your webserver (with Apache you can use .htaccess files, for example). If
other people have telnet access to your server, you should use phpMyAdmins HTTP or cookie authentication features.
Suggestions:
Your config.inc.php file should be chmod 660.
All your phpMyAdmin files should be chown -R phpmy.apache, where phpmy is a user whose password is only
known to you, and apache is the group under which Apache runs.
Follow security recommendations for PHP and your webserver.
4.3 I get errors about not being able to include a file in /lang or in /libraries.
Check php.ini, or ask your sysadmin to check it. The include_path must contain . somewhere in it, and
open_basedir, if used, must contain . and ./lang to allow normal operation of phpMyAdmin.
4.4 phpMyAdmin always gives Access denied when using HTTP authentication.
This could happen for several reasons:

$cfg['Servers'][$i]['controluser'] and/or $cfg['Servers'][$i]['controlpass']
are wrong.
The username/password you specify in the login dialog are invalid.
You have already setup a security mechanism for the phpMyAdmin- directory, eg. a .htaccess file. This would
interfere with phpMyAdmins authentication, so remove it.

4.5 Is it possible to let users create their own databases?
Starting with 2.2.5, in the user management page, you can enter a wildcard database name for a user (for exam-
ple joe%), and put the privileges you want. For example, adding SELECT, INSERT, UPDATE, DELETE,
CREATE, DROP, INDEX, ALTER would let a user create/manage his/her database(s).
4.6 How can I use the Host-based authentication additions?
If you have existing rules from an old .htaccess file, you can take them and add a username between the
'deny'/'allow' and 'from' strings. Using the username wildcard of '%' would be a major ben-
efit here if your installation is suited to using it. Then you can just add those updated lines into the
$cfg['Servers'][$i]['AllowDeny']['rules'] array.
If you want a pre-made sample, you can try this fragment. It stops the root user from logging in from any networks
other than the private network IP blocks.
//block root from logging in except from the private networks

$cfg['Servers'][$i]['AllowDeny']['order'] = 'deny,allow';
$cfg['Servers'][$i]['AllowDeny']['rules'] = array(
'deny root from all',
'allow root from localhost',
'allow root from 10.0.0.0/8',
'allow root from 192.168.0.0/16',
'allow root from 172.16.0.0/12',
);
4.7 Authentication window is displayed more than once, why?
This happens if you are using a URL to start phpMyAdmin which is different than the one set in your
$cfg['PmaAbsoluteUri']. For example, a missing www, or entering with an IP address while a domain
name is defined in the config file.
4.8 Which parameters can I use in the URL that starts phpMyAdmin?
When starting phpMyAdmin, you can use the db, pma_username, pma_password and server parameters.
This last one can contain either the numeric host index (from $i of the configuration file) or one of the host names
present in the configuration file. Using pma_username and pma_password has been tested along with the usage
of cookie auth_type.
Browsers or client OS
5.1 I get an out of memory error, and my controls are non-functional, when trying
to create a table with more than 14 columns.
We could reproduce this problem only under Win98/98SE. Testing under WinNT4 or Win2K, we could easily create
more than 60 columns. A workaround is to create a smaller number of columns, then come back to your table properties
and add the other columns.
6.5. Browsers or client OS 117

5.2 With Xitami 2.5b4, phpMyAdmin wont process form fields.
This is not a phpMyAdmin problem but a Xitami known bug: youll face it with each script/website that use forms.
Upgrade or downgrade your Xitami server.
5.3 I have problems dumping tables with Konqueror (phpMyAdmin 2.2.2).
With Konqueror 2.1.1: plain dumps, zip and gzip dumps work ok, except that the proposed file name for the dump is
always tbl_dump.php. The bzip2 dumps dont seem to work. With Konqueror 2.2.1: plain dumps work; zip dumps
are placed into the users temporary directory, so they must be moved before closing Konqueror, or else they disappear.
gzip dumps give an error message. Testing needs to be done for Konqueror 2.2.2.
5.4 I cant use the cookie authentication mode because Internet Explorer never
stores the cookies.
MS Internet Explorer seems to be really buggy about cookies, at least till version 6.
5.5 (withdrawn).
5.6 (withdrawn).
5.7 I refresh (reload) my browser, and come back to the welcome page.
Some browsers support right-clicking into the frame you want to refresh, just do this in the right frame.
5.8 With Mozilla 0.9.7 I have problems sending a query modified in the query box.
Looks like a Mozilla bug: 0.9.6 was OK. We will keep an eye on future Mozilla versions.
5.9 With Mozilla 0.9.? to 1.0 and Netscape 7.0-PR1 I cant type a whitespace in the
SQL-Query edit area: the page scrolls down.
This is a Mozilla bug (see bug #26882 at BugZilla).
5.10 (withdrawn).
5.11 Extended-ASCII characters like German umlauts are displayed wrong.
Please ensure that you have set your browsers character set to the one of the language file you have selected on
phpMyAdmins start page. Alternatively, you can try the auto detection mode that is supported by the recent versions
of the most browsers.
5.12 Mac OS X Safari browser changes special characters to ?.
This issue has been reported by a Mac OS X user, who adds that Chimera, Netscape and Mozilla do not have this
problem.

5.13 (withdrawn)
5.14 (withdrawn)
5.15 (withdrawn)
5.16 With Internet Explorer, I get Access is denied Javascript errors. Or I cannot
make phpMyAdmin work under Windows.
Please check the following points:

Maybe you have defined your $cfg['PmaAbsoluteUri'] setting in config.inc.php to an IP address
and you are starting phpMyAdmin with a URL containing a domain name, or the reverse situation.
Security settings in IE and/or Microsoft Security Center are too high, thus blocking scripts execution.
The Windows Firewall is blocking Apache and MySQL. You must allow HTTP ports (80 or 443) and MySQL
port (usually 3306) in the in and out directions.
5.17 With Firefox, I cannot delete rows of data or drop a database.
Many users have confirmed that the Tabbrowser Extensions plugin they installed in their Firefox is causing the prob-
lem.
5.18 (withdrawn)
5.19 I get JavaScript errors in my browser.
Issues have been reported with some combinations of browser extensions. To troubleshoot, disable all extensions then
clear your browser cache to see if the problem goes away.
5.20 I get errors about violating Content Security Policy.
If you see errors like:
Refused to apply inline style because it violates the following Content Security
Policy directive
This is usually caused by some software, which wrongly rewrites Content Security Policy headers. Usually
this is caused by antivirus proxy or browser addons which are causing such errors.
If you see these errors, try disabling the HTTP proxy in antivirus or disable the Content Security Policy
rewriting in it. If that doesnt help, try disabling browser extensions.
Alternatively it can be also server configuration issue (if the webserver is configured to emit Content Security
Policy headers, they can override the ones from phpMyAdmin).
Programs known to cause these kind of errors:
Kaspersky Internet Security
6.5. Browsers or client OS 119

5.21 I get errors about potentially unsafe operation when browsing table or execut-
ing SQL query.
If you see errors like:
A potentially unsafe operation has been detected in your request to this site.
This is usually caused by web application firewall doing requests filtering. It tries to prevent SQL injection, however
phpMyAdmin is tool designed to execute SQL queries, thus it makes it unusable.
Please whitelist phpMyAdmin scripts from the web application firewall settings or disable it completely for phpMyAd-
min path.
Programs known to cause these kind of errors:
Wordfence Web Application Firewall
Using phpMyAdmin
6.1 I cant insert new rows into a table / I cant create a table - MySQL brings up a
SQL error.
Examine the SQL error with care. Often the problem is caused by specifying a wrong column-type. Common errors
include:
Using VARCHAR without a size argument
Using TEXT or BLOB with a size argument
Also, look at the syntax chapter in the MySQL manual to confirm that your syntax is correct.
6.2 When I create a table, I set an index for two columns and phpMyAdmin gener-
ates only one index with those two columns.
This is the way to create a multi-columns index. If you want two indexes, create the first one when creating the table,
save, then display the table properties and click the Index link to create the other index.
6.3 How can I insert a null value into my table?
Since version 2.2.3, you have a checkbox for each column that can be null. Before 2.2.3, you had to enter null,
without the quotes, as the columns value. Since version 2.5.5, you have to use the checkbox to get a real NULL value,
so if you enter NULL this means you want a literal NULL in the column, and not a NULL value (this works in
PHP4).
6.4 How can I backup my database or table?
Click on a database or table name in the navigation panel, the properties will be displayed. Then on the menu, click
Export, you can dump the structure, the data, or both. This will generate standard SQL statements that can be used
to recreate your database/table. You will need to choose Save as file, so that phpMyAdmin can transmit the resulting
dump to your station. Depending on your PHP configuration, you will see options to compress the dump. See also the
$cfg['ExecTimeLimit'] configuration variable. For additional help on this subject, look for the word dump
in this document.

6.5 How can I restore (upload) my database or table using a dump? How can I run
a .sql file?
Click on a database name in the navigation panel, the properties will be displayed. Select Import from the list of
tabs in the righthand frame (or SQL if your phpMyAdmin version is previous to 2.7.0). In the Location of the text
file section, type in the path to your dump filename, or use the Browse button. Then click Go. With version 2.7.0, the
import engine has been rewritten, if possible it is suggested that you upgrade to take advantage of the new features.
For additional help on this subject, look for the word upload in this document.
Note: For errors while importing of dumps exported from older MySQL versions to newer MySQL versions, please
check 6.41 I get import errors while importing the dumps exported from older MySQL versions (pre-5.7.6) into newer
MySQL versions (5.7.7+), but they work fine when imported back on same older versions ?.
6.6 How can I use the relation table in Query-by-example?
Here is an example with the tables persons, towns and countries, all located in the database mydb. If you dont have
a pma__relation table, create it as explained in the configuration section. Then create the example tables:
CREATE TABLE REL_countries (

country_code char(1) NOT NULL default '',
description varchar(10) NOT NULL default '',
PRIMARY KEY (country_code)
) TYPE=MyISAM;
INSERT INTO REL_countries VALUES ('C', 'Canada');
CREATE TABLE REL_persons (

id tinyint(4) NOT NULL auto_increment,
person_name varchar(32) NOT NULL default '',
town_code varchar(5) default '0',
country_code char(1) NOT NULL default '',
PRIMARY KEY (id)
) TYPE=MyISAM;
INSERT INTO REL_persons VALUES (11, 'Marc', 'S', '');

INSERT INTO REL_persons VALUES (15, 'Paul', 'S', 'C');
CREATE TABLE REL_towns (

town_code varchar(5) NOT NULL default '0',
description varchar(30) NOT NULL default '',
PRIMARY KEY (town_code)
) TYPE=MyISAM;
INSERT INTO REL_towns VALUES ('S', 'Sherbrooke');

INSERT INTO REL_towns VALUES ('M', 'Montral');
To setup appropriate links and display information:

on table REL_persons click Structure, then Relation view
for town_code, choose from dropdowns, mydb, REL_towns, code for foreign database, table and col-
umn respectively
for country_code, choose from dropdowns, mydb, REL_countries, country_code for foreign database,
table and column respectively
on table REL_towns click Structure, then Relation view
6.6. Using phpMyAdmin 121

in Choose column to display, choose description

repeat the two previous steps for table REL_countries
Then test like this:
Click on your db name in the navigation panel
Choose Query
Use tables: persons, towns, countries
Click Update query
In the columns row, choose persons.person_name and click the Show tickbox
Do the same for towns.description and countries.descriptions in the other 2 columns
Click Update query and you will see in the query box that the correct joins have been generated
Click Submit query
6.7 How can I use the display column feature?
Starting from the previous example, create the pma__table_info as explained in the configuration section, then
browse your persons table, and move the mouse over a town code or country code. See also 6.21 In edit/insert mode,
how can I see a list of possible values for a column, based on some foreign table? for an additional feature that
display column enables: drop-down list of possible values.
6.8 How can I produce a PDF schema of my database?
First the configuration variables relation, table_coords and pdf_pages have to be filled in. Then you need to
think about your schema layout. Which tables will go on which pages?
Select your database in the navigation panel.
Choose Operations in the navigation bar at the top.
Choose Edit PDF Pages near the bottom of the page.
Enter a name for the first PDF page and click Go. If you like, you can use the automatic layout, which will
put all your linked tables onto the new page.
Select the name of the new page (making sure the Edit radio button is selected) and click Go.
Select a table from the list, enter its coordinates and click Save. Coordinates are relative; your diagram will be
automatically scaled to fit the page. When initially placing tables on the page, just pick any coordinates say,
50x50. After clicking Save, you can then use the 6.28 How can I easily edit relational schema for export? to
position the element correctly.
When youd like to look at your PDF, first be sure to click the Save button beneath the list of tables and
coordinates, to save any changes you made there. Then scroll all the way down, select the PDF options you
want, and click Go.
Internet Explorer for Windows may suggest an incorrect filename when you try to save a generated PDF. When
saving a generated PDF, be sure that the filename ends in .pdf, for example schema.pdf. Browsers on other
operating systems, and other browsers on Windows, do not have this problem.
See also:
Relations

6.9 phpMyAdmin is changing the type of one of my columns!
No, its MySQL that is doing silent column type changing.
6.10 When creating a privilege, what happens with underscores in the database
name?
If you do not put a backslash before the underscore, this is a wildcard grant, and the underscore means any character.
So, if the database name is john_db, the user would get rights to john1db, john2db ... If you put a backslash before
the underscore, it means that the database name will have a real underscore.
6.11 What is the curious symbol in the statistics pages?
It means average.
6.12 I want to understand some Export options.
Structure:
Add DROP TABLE will add a line telling MySQL to drop the table, if it already exists during the import. It
does NOT drop the table after your export, it only affects the import file.
If Not Exists will only create the table if it doesnt exist. Otherwise, you may get an error if the table name
exists but has a different structure.
Add AUTO_INCREMENT value ensures that AUTO_INCREMENT value (if any) will be included in backup.
Enclose table and column names with backquotes ensures that column and table names formed with special
characters are protected.
Add into comments includes column comments, relations, and MIME types set in the pmadb in the dump as
SQL comments (/* xxx */ ).
Data:
Complete inserts adds the column names on every INSERT command, for better documentation (but resulting
file is bigger).
Extended inserts provides a shorter dump file by using only once the INSERT verb and the table name.
Delayed inserts are best explained in the MySQL manual - INSERT DELAYED Syntax.
Ignore inserts treats errors as a warning instead. Again, more info is provided in the MySQL manual - INSERT
Syntax, but basically with this selected, invalid values are adjusted and inserted rather than causing the entire
statement to fail.
6.13 I would like to create a database with a dot in its name.
This is a bad idea, because in MySQL the syntax database.table is the normal way to reference a database and table
name. Worse, MySQL will usually let you create a database with a dot, but then you cannot work with it, nor delete it.

6.14 (withdrawn).
6.15 I want to add a BLOB column and put an index on it, but MySQL says BLOB
column ... used in key specification without a key length.
The right way to do this, is to create the column without any indexes, then display the table structure and use the
Create an index dialog. On this page, you will be able to choose your BLOB column, and set a size to the index,
which is the condition to create an index on a BLOB column.
6.16 How can I simply move in page with plenty editing fields?
You can use Ctrl+arrows (Option+Arrows in Safari) for moving on most pages with many editing fields (table
structure changes, row editing, etc.).
6.17 Transformations: I cant enter my own mimetype! What is this feature then
useful for?
Defining mimetypes is of no use if you cant put transformations on them. Otherwise you could just put a comment
on the column. Because entering your own mimetype will cause serious syntax checking issues and validation, this
introduces a high-risk false- user-input situation. Instead you have to initialize mimetypes using functions or empty
mimetype definitions.
Plus, you have a whole overview of available mimetypes. Who knows all those mimetypes by heart so he/she can
enter it at will?
6.18 Bookmarks: Where can I store bookmarks? Why cant I see any bookmarks
below the query box? What are these variables for?
You need to have configured the phpMyAdmin configuration storage for using bookmarks feature. Once you have
done that, you can use bookmarks in the SQL tab.
See also:
Bookmarks
6.19 How can I create simple LATEX document to include exported table?
You can simply include table in your LATEX documents, minimal sample document should look like following one
(assuming you have table exported in file table.tex):
\documentclass{article} % or any class you want
\usepackage{longtable} % for displaying table
\begin{document} % start of document
\include{table} % including exported table
\end{document} % end of document
6.20 I see a lot of databases which are not mine, and cannot access them.
You have one of these global privileges: CREATE TEMPORARY TABLES, SHOW DATABASES, LOCK TABLES.
Those privileges also enable users to see all the database names. So if your users do not need those privileges, you can
remove them and their databases list will shorten.

See also:
<https://bugs.mysql.com/bug.php?id=179>
6.21 In edit/insert mode, how can I see a list of possible values for a column, based
on some foreign table?
You have to setup appropriate links between the tables, and also setup the display column in the foreign table.
See 6.6 How can I use the relation table in Query-by-example? for an example. Then, if there are 100 values or
less in the foreign table, a drop-down list of values will be available. You will see two lists of values, the first list
containing the key and the display column, the second list containing the display column and the key. The reason
for this is to be able to type the first letter of either the key or the display column. For 100 values or more, a dis-
tinct window will appear, to browse foreign key values and choose one. To change the default limit of 100, see
$cfg['ForeignKeyMaxLimit'].
6.22 Bookmarks: Can I execute a default bookmark automatically when entering

Browse mode for a table?
Yes. If a bookmark has the same label as a table name and its not a public bookmark, it will be executed.
See also:
Bookmarks
6.23 Export: I heard phpMyAdmin can export Microsoft Excel files?
You can use CSV for Microsoft Excel, which works out of the box.
Changed in version 3.4.5: Since phpMyAdmin 3.4.5 support for direct export to Microsoft Excel version 97 and newer
was dropped.
6.24 Now that phpMyAdmin supports native MySQL 4.1.x column comments, what
happens to my column comments stored in pmadb?
Automatic migration of a tables pmadb-style column comments to the native ones is done whenever you enter Struc-
ture page for this table.
6.25 (withdrawn).
6.26 How can I select a range of rows?
Click the first row of the range, hold the shift key and click the last row of the range. This works everywhere you see
rows, for example in Browse mode or on the Structure page.
In all places where phpMyAdmin accepts format strings, you can use @VARIABLE@ expansion and strftime format
strings. The expanded variables depend on a context (for example, if you havent chosen a table, you can not get the
table name), but the following variables can be used:
@HTTP_HOST@ HTTP host that runs phpMyAdmin

@SERVER@ MySQL server name

@VERBOSE@ Verbose MySQL server name as defined in $cfg['Servers'][$i]['verbose']
@VSERVER@ Verbose MySQL server name if set, otherwise normal
@DATABASE@ Currently opened database
@TABLE@ Currently opened table
@COLUMNS@ Columns of the currently opened table
@PHPMYADMIN@ phpMyAdmin with version
6.28 How can I easily edit relational schema for export?
By clicking on the button toggle scratchboard on the page where you edit x/y coordinates of those elements you can
activate a scratchboard where all your elements are placed. By clicking on an element, you can move them around
in the pre-defined area and the x/y coordinates will get updated dynamically. Likewise, when entering a new position
directly into the input field, the new position in the scratchboard changes after your cursor leaves the input field.
You have to click on the OK-button below the tables to save the new positions. If you want to place a new element,
first add it to the table of elements and then you can drag the new element around.
By changing the paper size and the orientation you can change the size of the scratchboard as well. You can do so by
just changing the dropdown field below, and the scratchboard will resize automatically, without interfering with the
current placement of the elements.
If ever an element gets out of range you can either enlarge the paper size or click on the reset button to place all
elements below each other.
6.29 Why cant I get a chart from my query result table?
Not every table can be put to the chart. Only tables with one, two or three columns can be visualised as a chart.
Moreover the table must be in a special format for chart script to understand it. Currently supported formats can be
found in Charts.
6.30 Import: How can I import ESRI Shapefiles?
An ESRI Shapefile is actually a set of several files, where .shp file contains geometry data and .dbf file contains data
related to those geometry data. To read data from .dbf file you need to have PHP compiled with the dBase extension
(enable-dbase). Otherwise only geometry data will be imported.
To upload these set of files you can use either of the following methods:
Configure upload directory with $cfg['UploadDir'], upload both .shp and .dbf files with the same filename and
chose the .shp file from the import page.
Create a zip archive with .shp and .dbf files and import it. For this to work, you need to set $cfg['TempDir'] to a
place where the web server user can write (for example './tmp').
To create the temporary directory on a UNIX-based system, you can do:
cd phpMyAdmin
mkdir tmp
chmod o+rwx tmp

6.31 How do I create a relation in designer?
To select relation, click: The display column is shown in pink. To set/unset a column as the display column, click the
Choose column to display icon, then click on the appropriate column name.
6.32 How can I use the zoom search feature?
The Zoom search feature is an alternative to table search feature. It allows you to explore a table by representing its
data in a scatter plot. You can locate this feature by selecting a table and clicking the Search tab. One of the sub-tabs
in the Table Search page is Zoom Search.
Consider the table REL_persons in 6.6 How can I use the relation table in Query-by-example? for an example. To use
zoom search, two columns need to be selected, for example, id and town_code. The id values will be represented on
one axis and town_code values on the other axis. Each row will be represented as a point in a scatter plot based on its
id and town_code. You can include two additional search criteria apart from the two fields to display.
You can choose which field should be displayed as label for each point. If a display column has been set for the table
(see 6.7 How can I use the display column feature?), it is taken as the label unless you specify otherwise. You can
also select the maximum number of rows you want to be displayed in the plot by specifing it in the Max rows to plot
field. Once you have decided over your criteria, click Go to display the plot.
After the plot is generated, you can use the mousewheel to zoom in and out of the plot. In addition, panning feature is
enabled to navigate through the plot. You can zoom-in to a certain level of detail and use panning to locate your area
of interest. Clicking on a point opens a dialogue box, displaying field values of the data row represented by the point.
You can edit the values if required and click on submit to issue an update query. Basic instructions on how to use can
be viewed by clicking the How to use? link located just above the plot.
6.33 When browsing a table, how can I copy a column name?
Selecting the name of the column within the browse table header cell for copying is difficult, as the columns support
reordering by dragging the header cells as well as sorting by clicking on the linked column name. To copy a column
name, double-click on the empty area next to the column name, when the tooltip tells you to do so. This will show
you an input box with the column name. You may right-click the column name within this input box to copy it to your
clipboard.
6.34 How can I use the Favorite Tables feature?
Favorite Tables feature is very much similar to Recent Tables feature. It allows you to add a shortcut for the frequently
used tables of any database in the navigation panel . You can easily navigate to any table in the list by simply choosing
it from the list. These tables are stored in your browsers local storage if you have not configured your phpMyAdmin
Configuration Storage. Otherwise these entries are stored in phpMyAdmin Configuration Storage.
IMPORTANT: In absence of phpMyAdmin Configuration Storage, your Favorite tables may be different in different
browsers based on your different selections in them.
To add a table to Favorite list simply click on the Gray star in front of a table name in the list of tables of a Database
and wait until it turns to Yellow. To remove a table from list, simply click on the Yellow star and wait until it turns
Gray again.
Using $cfg['NumFavoriteTables'] in your config.inc.php file, you can define the maximum number
of favorite tables shown in the navigation panel. Its default value is 10.

6.35 How can I use the Range search feature?
With the help of range search feature, one can specify a range of values for particular column(s) while performing
search operation on a table from the Search tab.
To use this feature simply click on the BETWEEN or NOT BETWEEN operators from the operator select list in front
of the column name. On choosing one of the above options, a dialog box will show up asking for the Minimum
and Maximum value for that column. Only the specified range of values will be included in case of BETWEEN and
excluded in case of NOT BETWEEN from the final results.
Note: The Range search feature will work only Numeric and Date data type columns.
6.36 What is Central columns and how can I use this feature?
As the name suggests, the Central columns feature enables to maintain a central list of columns per database to avoid
similar name for the same data element and bring consistency of data type for the same data element. You can use the
central list of columns to add an element to any table structure in that database which will save from writing similar
column name and column definition.
To add a column to central list, go to table structure page, check the columns you want to include and then simply
click on Add to central columns. If you want to add all unique columns from more than one table from a database
then go to database structure page, check the tables you want to include and then select Add columns to central list.
To remove a column from central list, go to Table structure page, check the columns you want to remove and then
simply click on Remove from central columns. If you want to remove all columns from more than one tables from
a database then go to database structure page, check the tables you want to include and then select Remove columns
from central list.
To view and manage the central list, select the database you want to manage central columns for then from the top
menu click on Central columns. You will be taken to a page where you will have options to edit, delete or add new
columns to central list.
6.37 How can I use Improve Table structure feature?
Improve table structure feature helps to bring the table structure upto Third Normal Form. A wizard is presented
to user which asks questions about the elements during the various steps for normalization and a new structure is
proposed accordingly to bring the table into the First/Second/Third Normal form. On startup of the wizard, user gets
to select upto what normal form they want to normalize the table structure.
Here is an example table which you can use to test all of the three First, Second and Third Normal Form.
CREATE TABLE `VetOffice` (

`petName` varchar(64) NOT NULL,
`petBreed` varchar(64) NOT NULL,
`petType` varchar(64) NOT NULL,
`petDOB` date NOT NULL,
òwnerLastName` varchar(64) NOT NULL,
òwnerFirstName` varchar(64) NOT NULL,
òwnerPhone1` int(12) NOT NULL,
òwnerPhone2` int(12) NOT NULL,
òwnerEmail` varchar(64) NOT NULL,
);
The above table is not in First normal Form as no primary key exists. Primary key is supposed to be (pet-
Name,ownerLastName,ownerFirstName) . If the primary key is chosen as suggested the resultant table wont
be in Second as well as Third Normal form as the following dependencies exists.

(OwnerLastName, OwnerFirstName) -> OwnerEmail

(OwnerLastName, OwnerFirstName) -> OwnerPhone
PetBreed -> PetType
Which says, OwnerEmail depends on OwnerLastName and OwnerFirstName. OwnerPhone depends on OwnerLast-
Name and OwnerFirstName. PetType depends on PetBreed.
6.38 How can I reassign auto-incremented values?
Some users prefer their AUTO_INCREMENT values to be consecutive; this is not always the case after row deletion.
Here are the steps to accomplish this. These are manual steps because they involve a manual verification at one point.
Ensure that you have exclusive access to the table to rearrange
On your primary key column (i.e. id), remove the AUTO_INCREMENT setting
Delete your primary key in Structure > indexes
Create a new column future_id as primary key, AUTO_INCREMENT
Browse your table and verify that the new increments correspond to what youre expecting
Drop your old id column
Rename the future_id column to id
Move the new id column via Structure > Move columns
6.39 What is the Adjust privileges option when renaming, copying, or moving a
database, table, column, or procedure?
When renaming/copying/moving a database/table/column/procedure, MySQL does not adjust the original privileges
relating to these objects on its own. By selecting this option, phpMyAdmin will adjust the privilege table so that users
have the same privileges on the new items.
For example: A user bob@localhost has a SELECT privilege on a column named id. Now, if this column is
renamed to id_new, MySQL, on its own, would not adjust the column privileges to the new column name. php-
MyAdmin can make this adjustment for you automatically.
Notes:
While adjusting privileges for a database, the privileges of all database-related elements (tables, columns and
procedures) are also adjusted to the databases new name.
Similarly, while adjusting privileges for a table, the privileges of all the columns inside the new table are also
adjusted.
While adjusting privileges, the user performing the operation must have the following privileges:
SELECT, INSERT, UPDATE, DELETE privileges on following tables: mysql.db, mysql.columns_priv,
mysql.tables_priv, mysql.procs_priv
FLUSH privilege (GLOBAL)
Thus, if you want to replicate the database/table/column/procedure as it is while renaming/copying/moving these
objects, make sure you have checked this option.

6.40 I see Bind parameters checkbox in the SQL page. How do I write parame-
terized SQL queries?
From version 4.5, phpMyAdmin allows users to execute parameterized queries in the SQL page. Parameters should
be prefixed with a colon(:) and when the Bind parameters checkbox is checked these parameters will be identified
and input fields for these parameters will be presented. Values entered in these field will be substituted in the query
before being executed.
6.41 I get import errors while importing the dumps exported from older MySQL
versions (pre-5.7.6) into newer MySQL versions (5.7.7+), but they work fine
when imported back on same older versions ?
If you get errors like #1031 - Table storage engine for table_name doesnt have this option while importing
the dumps exported from pre-5.7.7 MySQL servers into new MySQL server versions 5.7.7+, it might be because
ROW_FORMAT=FIXED is not supported with InnoDB tables. Moreover, the value of innodb_strict_mode would
define if this would be reported as a warning or as an error.
Since MySQL version 5.7.9, the default value for innodb_strict_mode is ON and thus would generate an error when
such a CREATE TABLE or ALTER TABLE statement is encountered.
There are two ways of preventing such errors while importing:
Change the value of innodb_strict_mode to OFF before starting the import and turn it ON after the import is
successfully completed.
This can be achieved in two ways:
Go to Variables page and edit the value of innodb_strict_mode
Run the query : SET GLOBAL innodb_strict_mode = [value]
After the import is done, it is suggested that the value of innodb_strict_mode should be reset to the original value.
phpMyAdmin project
7.1 I have found a bug. How do I inform developers?
Our issues tracker is located at <https://github.com/phpmyadmin/phpmyadmin/issues>. For security issues, please

refer to the instructions at <https://www.phpmyadmin.net/security> to email the developers directly.
7.2 I want to translate the messages to a new language or upgrade an existing

language, where do I start?
Translations are very welcome and all you need to have are the language skills. The easiest way is to use our online
translation service. You can check out all the possibilities to translate in the translate section on our website.
7.3 I would like to help out with the development of phpMyAdmin. How should I
proceed?
We welcome every contribution to the development of phpMyAdmin. You can check out all the possibilities to
contribute in the contribute section on our website.
See also:

Developers Information
Security
8.1 Where can I get information about the security alerts issued for phpMyAdmin?
Please refer to <https://www.phpmyadmin.net/security/>.
8.2 How can I protect phpMyAdmin against brute force attacks?
If you use Apache web server, phpMyAdmin exports information about authentication to the Apache environment and
it can be used in Apache logs. Currently there are two variables available:
userID User name of currently active user (he does not have to be logged in).
userStatus Status of currently active user, one of ok (user is logged in), mysql-denied (MySQL denied user
login), allow-denied (user denied by allow/deny rules), root-denied (root is denied in configuration),
empty-denied (empty password is denied).
LogFormat directive for Apache can look like following:
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %{userID}n %

{userStatus}n" pma_combined
You can then use any log analyzing tools to detect possible break-in attempts.
8.3 Why are there path disclosures when directly loading certain files?
This is a server configuration problem. Never enable display_errors on a production site.
8.4 CSV files exported from phpMyAdmin could allow a formula injection attack.
It is possible to generate a CSV file that, when imported to a spreadsheet program such as Microsoft Excel, could
potentially allow the execution of arbitrary commands.
The CSV files generated by phpMyAdmin could potentially contain text that would be interpreted by a spreadsheet
program as a formula, but we do not believe escaping those fields is the proper behavior. There is no means to
properly escape and differentiate between a desired text output and a formula that should be escaped, and CSV is a
text format where function definitions should not be interpreted anyway. We have discussed this at length and feel it
is the responsibility of the spreadsheet program to properly parse and sanitize such data on input instead.
Google also has a similar view.
Synchronization
9.1 (withdrawn).
9.2 (withdrawn).
6.8. Security 131


CHAPTER 7
Developers Information
phpMyAdmin is Open Source, so youre invited to contribute to it. Many great features have been written by other
people and you too can help to make phpMyAdmin a useful tool.
You can check out all the possibilities to contribute in the contribute section on our website.
133
134 Chapter 7. Developers Information

CHAPTER 8
Distributing and packaging phpMyAdmin
This document is intended to give advices to people who want to redistribute phpMyAdmin inside other software
package such as Linux distribution or some all in one package including web server and MySQL server.
Generally you can customize some basic aspects (paths to some files and behavior) in libraries/
vendor_config.php.
For example if you want setup script to generate config file in var, change SETUP_CONFIG_FILE to /var/
lib/phpmyadmin/config.inc.php and you will also probably want to skip directory writable check, so set
SETUP_DIR_WRITABLE to false.
External libraries
phpMyAdmin includes several external libraries, you might want to replace them with system ones if they are available,
but please note that you should test whether version you provide is compatible with the one we ship.
Currently known list of external libraries:
js/jquery jQuery js framework and various jQuery based libraries.
vendor/ The download kit includes various Composer packages as dependencies.
135
136 Chapter 8. Distributing and packaging phpMyAdmin

CHAPTER 9
Copyright
Copyright (C) 1998-2000 Tobias Ratschiller <tobias_at_ratschiller.com>

Copyright (C) 2001-2017 Marc Delisle <marc_at_infomarc.info>
Olivier Mller <om_at_omnis.ch>
Robin Johnson <robbat2_at_users.sourceforge.net>
Alexander M. Turek <me_at_derrabus.de>
Michal
Ciha
r <michal_at_cihar.com>
Garvin Hicking <me_at_supergarv.de>
Michael Keck <mkkeck_at_users.sourceforge.net>
Sebastian Mendel <cybot_tm_at_users.sourceforge.net>
[check credits for more details]
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public
License version 2, as published by the Free Software Foundation.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see <https:
//www.gnu.org/licenses/>.
Third party licenses
phpMyAdmin includes several third party libraries which come under their respective licenses.
jQuerys license, which is where we got the files under js/jquery/ is (MIT|GPL), a copy of each license is available in
this repository (GPL is available as LICENSE, MIT as js/jquery/MIT-LICENSE.txt).
The download kit additionally includes several composer libraries. See their licensing information in the vendor/
directory.
137
138 Chapter 9. Copyright

CHAPTER 10
Credits
Credits, in chronological order
Tobias Ratschiller <tobias_at_ratschiller.com>

creator of the phpmyadmin project
maintainer from 1998 to summer 2000
Marc Delisle <marc_at_infomarc.info>
multi-language version in December 1998
various fixes and improvements
first version of the SQL analyser (most of it)
maintainer from 2001 to 2015
Olivier Mller <om_at_omnis.ch>
started SourceForge phpMyAdmin project in March 2001
synced different existing CVS trees with new features and bugfixes
multi-language improvements, dynamic language selection
many bugfixes and improvements
Loc Chapeaux <lolo_at_phpheaven.net>
rewrote and optimized JavaScript, DHTML and DOM stuff
rewrote the scripts so they fit the PEAR coding standards and generate XHTML1.0 and CSS2 compliant
codes
improved the language detection system
Robin Johnson <robbat2_at_users.sourceforge.net>
139
database maintenance controls

table type code
Host authentication IP Allow/Deny
DB-based configuration (Not completed)
SQL parser and pretty-printer
SQL validator
Armel Fauveau <armel.fauveau_at_globalis-ms.com>
bookmarks feature
multiple dump feature
gzip dump feature
zip dump feature
Geert Lund <glund_at_silversoft.dk>
various fixes
moderator of the phpMyAdmin former users forum at phpwizard.net
Korakot Chaovavanich <korakot_at_iname.com>
insert as new row feature
Pete Kelly <webmaster_at_trafficg.com>
rewrote and fix dump code
bugfixes
Steve Alberty <alberty_at_neptunlabs.de>
rewrote dump code for PHP4
mySQL table statistics
bugfixes
Benjamin Gandon <gandon_at_isia.cma.fr>
main author of the version 2.1.0.1
bugfixes
Alexander M. Turek <me_at_derrabus.de>
MySQL 4.0 / 4.1 / 5.0 compatibility
abstract database interface (PMA_DBI) with MySQLi support
privileges administration
XML exports
various features and fixes
German language file updates
Mike Beck <mike.beck_at_web.de>
automatic joins in QBE
140 Chapter 10. Credits

links column in printview

Relation view
Michal Ciha
enhanced index creation/display feature
feature to use a different charset for HTML than for MySQL
improvements of export feature
various features and fixes
Czech language file updates
created current website for phpMyAdmin
Christophe Gesch from the MySQL Form Generator for PHPMyAdmin (https://sourceforge.net/projects/
phpmysqlformgen/)
suggested the patch for multiple table printviews
Garvin Hicking <me_at_supergarv.de>
built the patch for vertical display of table rows
built the Javascript based Query window + SQL history
Improvement of column/db comments
(MIME)-Transformations for columns
Use custom alias names for Databases in left frame
hierarchical/nested table display
PDF-scratchboard for WYSIWYG- distribution of PDF relations
new icon sets
vertical display of column properties page
some bugfixes, features, support, German language additions
Yukihiro Kawada <kawada_at_den.fujifilm.co.jp>
japanese kanji encoding conversion feature
Piotr Roszatycki <d3xter_at_users.sourceforge.net> and Dan Wilson
the Cookie authentication mode
Axel Sander <n8falke_at_users.sourceforge.net>
table relation-links feature
Maxime Delorme <delorme.maxime_at_free.fr>
PDF schema output, thanks also to Olivier Plathey for the FPDF library (see <http:
//www.fpdf.org/>), Steven Wittens for the UFPDF library (see <https://acko.net/blog/
ufpdf-unicode-utf-8-extension-for-fpdf/>) and Nicola Asuni for the TCPDF library (see
<https://tcpdf.org/>).
Olof Edlund <olof.edlund_at_upright.se>
SQL validator server
Ivan R. Lanin <ivanlanin_at_users.sourceforge.net>
10.1. Credits, in chronological order 141

phpMyAdmin logo (until June 2004)

Mike Cochrane <mike_at_graftonhall.co.nz>
blowfish library from the Horde project (withdrawn in release 4.0)
Marcel Tschopp <ne0x_at_users.sourceforge.net>
mysqli support
Nicola Asuni (Tecnick.com)
TCPDF library (<https://tcpdf.org>)
Michael Keck <mkkeck_at_users.sourceforge.net>
redesign for 2.6.0
phpMyAdmin sailboat logo (June 2004)
Mathias Landhuer
Representation at conferences
Sebastian Mendel <cybot_tm_at_users.sourceforge.net>
interface improvements
various bugfixes
Ivan A Kirillov
new relations Designer
Raj Kissu Rajandran (Google Summer of Code 2008)
BLOBstreaming support (withdrawn in release 4.0)
Piotr Przybylski (Google Summer of Code 2008, 2010 and 2011)
improved setup script
user preferences
Drizzle support
Derek Schaefer (Google Summer of Code 2009)
Improved the import system
Alexander Rutkowski (Google Summer of Code 2009)
Tracking mechanism
Zahra Naeem (Google Summer of Code 2009)
Synchronization feature (removed in release 4.0)
Tom Srnka (Google Summer of Code 2009)
Replication support
Muhammad Adnan (Google Summer of Code 2010)
Relation schema export to multiple formats
Lori Lee (Google Summer of Code 2010)
User interface improvements

ENUM/SET editor
Simplified interface for export/import
Ninad Pundalik (Google Summer of Code 2010)
AJAXifying the interface
Martynas Mickevicius (Google Summer of Code 2010)
Charts
Barrie Leslie
BLOBstreaming support with PBMS PHP extension (withdrawn in release 4.0)
Ankit Gupta (Google Summer of Code 2010)
Visual query builder
Madhura Jayaratne (Google Summer of Code 2011)
OpenGIS support
Ammar Yasir (Google Summer of Code 2011)
Zoom search
Aris Feryanto (Google Summer of Code 2011)
Browse-mode improvements
Thilanka Kaushalya (Google Summer of Code 2011)
AJAXification
Tyron Madlener (Google Summer of Code 2011)
Query statistics and charts for the status page
Zarubin Stas (Google Summer of Code 2011)
Automated testing
Rouslan Placella (Google Summer of Code 2011 and 2012)
Improved support for Stored Routines, Triggers and Events
Italian translation updates
Removal of frames, new navigation
Dieter Adriaenssens
Various bugfixes
Dutch translation updates
Alex Marin (Google Summer of Code 2012)
New plugins and properties system
Thilina Buddika Abeyrathna (Google Summer of Code 2012)
Refactoring
Atul Pratap Singh (Google Summer of Code 2012)
Refactoring
Chanaka Indrajith (Google Summer of Code 2012)
10.1. Credits, in chronological order 143

Refactoring
Yasitha Pandithawatta (Google Summer of Code 2012)
Automated testing
Jim Wigginton (phpseclib.sourceforge.net)
phpseclib
Bin Zu (Google Summer of Code 2013)
Refactoring
Supun Nakandala (Google Summer of Code 2013)
Refactoring
Mohamed Ashraf (Google Summer of Code 2013)
AJAX error reporting
Adam Kang (Google Summer of Code 2013)
Automated testing
Ayush Chaudhary (Google Summer of Code 2013)
Automated testing
Kasun Chathuranga (Google Summer of Code 2013)
Interface improvements
Hugues Peccatte
Load/save query by example (database search bookmarks)
Smita Kumari (Google Summer of Code 2014)
Central list of columns
Improve table structure (normalization)
Ashutosh Dhundhara (Google Summer of Code 2014)
Interface improvements
Dhananjay Nakrani (Google Summer of Code 2014)
PHP error reporting
Edward Cheng (Google Summer of Code 2014)
SQL Query Console
Kankanamge Bimal Yashodha (Google Summer of Code 2014)
Refactoring: Designer/schema integration
Chirayu Chiripal (Google Summer of Code 2014)
Custom field handlers (Input based MIME transformations)
Export with table/column name changes
Dan Ungureanu (Google Summer of Code 2015)
New parser and analyzer
Nisarg Jhaveri (Google Summer of Code 2015)

Page-related settings
SQL debugging integration to the Console
Other UI improvements
Deven Bansod (Google Summer of Code 2015)
Print view using CSS
Other UI improvements and new features
And also to the following people who have contributed minor changes, enhancements, bugfixes or support for a new
language since version 2.1.0:
Bora Alioglu, Ricardo ?, Sven-Erik Andersen, Alessandro Astarita, Pter Bakondy, Borges Botelho, Olivier Bussier,
Neil Darlow, Mats Engstrom, Ian Davidson, Laurent Dhima, Kristof Hamann, Thomas Klger, Lubos Klokner, Martin
Marconcini, Girish Nair, David Nordenberg, Andreas Pauley, Bernard M. Piller, Laurent Haas, Sakamoto, Yuval
Sarna, www.securereality.com.au, Alexis Soulard, Alvar Soome, Siu Sun, Peter Svec, Michael Tacelosky, Rachim
Tamsjadi, Kositer Uros, Lus V., Martijn W. van der Lee, Algis Vainauskas, Daniel Villanueva, Vinay, Ignacio Vazquez-
Abrams, Chee Wai, Jakub Wilk, Thomas Michael Winningham, Vilius Zigmantas, Manuzhai.
Translators
Following people have contributed to translation of phpMyAdmin:

Albanian
Arben okaj <acokaj_at_shkoder.net>
Arabic
Ahmed Saleh Abd El-Raouf Ismae <a.saleh.ismael_at_gmail.com>
Ahmed Saad <egbrave_at_hotmail.com>
hassan mokhtari <persiste1_at_gmail.com>
Armenian
Andrey Aleksanyants <aaleksanyants_at_yahoo.com>
Azerbaijani
Mirclal <01youknowme_at_gmail.com>
Huseyn <huseyn_esgerov_at_mail.ru>
Sevdimali Isa <sevdimaliisayev_at_mail.ru>
Jafar <sharifov_at_programmer.net>
Belarusian
Viktar Palstsiuk <vipals_at_gmail.com>
Bulgarian
Boyan Kehayov <bkehayov_at_gmail.com>
Valter Georgiev <blagynchy_at_gmail.com>
Valentin Mladenov <hudsonvsm_at_gmail.com>
P <plamen_mbx_at_yahoo.com>
10.2. Translators 145

krasimir <vip_at_krasio-valia.com>
Catalan
josep constanti <jconstanti_at_yahoo.es>
Xavier Navarro <xvnavarro_at_gmail.com>
Chinese (China)
Vincent Lau <3092849_at_qq.com>
Zheng Dan <clanboy_at_163.com>
disorderman <disorderman_at_qq.com>
Rex Lee <duguying2008_at_gmail.com>
<fundawang_at_gmail.com>
popcorner <memoword_at_163.com>
Yizhou Qiang <qyz.yswy_at_hotmail.com>
zz <tczzjin_at_gmail.com>
Terry Weng <wengshiyu_at_gmail.com>
whh <whhlcj_at_126.com>
Chinese (Taiwan)
Albert Song <albb0920_at_gmail.com>
Chien Wei Lin <cwlin0416_at_gmail.com>
LNDDYL <lnddyl_at_outlook.com>
Peter Dave Hello <xs910203_at_gmail.com>
Colognian
Purodha <publi_at_web.de>
Czech
Ale Hakl <ales_at_hakl.net>
Dalibor Straka <dalibor.straka3_at_gmail.com>
Martin Vidner <martin_at_vidner.net>
Ondra imecek <ondrasek.simecek_at_gmail.com>
Jan Palider <palider_at_seznam.cz>
Petr Katerink <petr.katerinak_at_gmail.com>
Danish
Aputsia Niels Janussen <aj_at_isit.gl>
Dennis Jakobsen <dennis.jakobsen_at_gmail.com>
Jonas <jonas.den.smarte_at_gmail.com>
Claus Svalekjaer <just.my.smtp.server_at_gmail.com>
Dutch
1. Voogt <a.voogt_at_hccnet.nl>

dingo thirteen <dingo13_at_gmail.com>

Robin van der Vliet <info_at_robinvandervliet.nl>
Dieter Adriaenssens <ruleant_at_users.sourceforge.net>
Niko Strijbol <strijbol.niko_at_gmail.com>
English (United Kingdom)
Dries Verschuere <dries.verschuere_at_outlook.com>
Francisco Rocha <j.francisco.o.rocha_at_zoho.com>
Marek Tomatk <tomastik.m_at_gmail.com>
Esperanto
Eliovir <eliovir_at_gmail.com>
Estonian
Kristjan Rts <kristjanrats_at_gmail.com>
Finnish
Juha Remes <jremes_at_outlook.com>
Lari Oesch <lari_at_oesch.me>
French
Frisian
Galician
Xos Calvo <xosecalvo_at_gmail.com>
German
Julian Ladisch <github.com-t3if_at_ladisch.de>
Jan Erik Zassenhaus <jan.zassenhaus_at_jgerman.de>
Lasse Goericke <lasse_at_mydom.de>
Matthias Bluthardt <matthias_at_bluthardt.org>
Michael Koch <michael.koch_at_enough.de>
Ann + J.M. <phpMyAdmin_at_ZweiSteinSoft.de>
<pma_at_sebastianmendel.de>
Phillip Rohmberger <rohmberger_at_hotmail.de>
Hauke Henningsen <sqrt_at_entless.org>
Greek
oo <papaz_p_at_yahoo.com>
Hebrew

Moshe Harush <mmh15_at_windowslive.com>

Yaron Shahrabani <sh.yaron_at_gmail.com>
Eyal Visoker <visokereyal_at_gmail.com>
Hindi
Atul Pratap Singh <atulpratapsingh05_at_gmail.com>
Yogeshwar <charanyogeshwar_at_gmail.com>
Deven Bansod <devenbansod.bits_at_gmail.com>
Kushagra Pandey <kushagra4296_at_gmail.com>
Nisarg Jhaveri <nisargjhaveri_at_gmail.com>
Roohan Kazi <roohan_cena_at_yahoo.co.in>
Yugal Pantola <yug.scorpio_at_gmail.com>
Hungarian
Akos Eros <erosakos02_at_gmail.com>
Dniel Tth <leedermeister_at_gmail.com>
Szsz Attila <undernetangel_at_gmail.com>
Balzs r <urbalazs_at_gmail.com>
Indonesian
Deky Arifianto <Deky40_at_gmail.com>
Andika Triwidada <andika_at_gmail.com>
Dadan Setia <da2n_s_at_yahoo.co.id>
Dadan Setia <dadan.setia_at_gmail.com>
Yohanes Edwin <edwin_at_yohanesedwin.com>
Fadhiil Rachman <fadhiilrachman_at_gmail.com>
Benny <tarzq28_at_gmail.com>
Tommy Surbakti <tommy_at_surbakti.net>
Zufar Fathi Suhardi <zufar.bogor_at_gmail.com>
Interlingua
Giovanni Sora <g.sora_at_tiscali.it>
Italian
Francesco Saverio Giacobazzi <francesco.giacobazzi_at_ferrania.it>
Marco Pozzato <ironpotts_at_gmail.com>
Stefano Martinelli <stefano.ste.martinelli_at_gmail.com>
Japanese
k725 <alexalex.kobayashi_at_gmail.com>
Hiroshi Chiyokawa <hiroshi.chiyokawa_at_gmail.com>
Masahiko HISAKAWA <orzkun_at_ageage.jp>

worldwideskier <worldwideskier_at_yahoo.co.jp>
Kannada
Shameem Ahmed A Mulla <shameem.sam_at_gmail.com>
Korean
Bumsoo Kim <bskim45_at_gmail.com>
Kyeong Su Shin <cdac1234_at_gmail.com>
Dongyoung Kim <dckyoung_at_gmail.com>
Myung-han Yu <greatymh_at_gmail.com>
JongDeok <human.zion_at_gmail.com>
Yong Kim <kim_at_nhn.com>
<kyungjun2_at_gmail.com>
Seongki Shin <skshin_at_gmail.com>
Yoon Bum-Jong <virusyoon_at_gmail.com>
Koo Youngmin <youngminz.kr_at_gmail.com>
Kurdish Sorani
Alan Hilal <alan.hilal94_at_gmail.com>
Aso Naderi <aso.naderi_at_gmail.com>
muhammad <esy_vb_at_yahoo.com>
Zrng Abdulla <zhyarabdulla94_at_gmail.com>
Latvian
Latvian TV <dnighttv_at_gmail.com>
Edgars Neimanis <edgarsneims5092_at_inbox.lv>
Ukko <perkontevs_at_gmail.com>
Limburgish
Lithuanian
Vytautas Motuzas <v.motuzas_at_gmail.com>
Malay
Amir Hamzah <amir.overlord666_at_gmail.com>
diprofinfiniti <anonynuine-999_at_yahoo.com>
Nepali
Nabin Ghimire <nnabinn_at_hotmail.com>
Norwegian Bokml
Brge Holm-Wennberg <borge947_at_gmail.com>
Tor Stokkan <danorse_at_gmail.com>

Espen Fryshov <efroys_at_gmail.com>

Kurt Eilertsen <kurt_at_kheds.com>
Christoffer Haugom <ph3n1x.nobody_at_gmail.com>
Sebastian <sebastian_at_sgundersen.com>
Tomas <tomas_at_tomasruud.com>
Persian
ashkan shirian <ashkan.shirian_at_gmail.com>
HM <goodlinuxuser_at_chmail.ir>
Polish
Andrzej <andrzej_at_kynu.pl>
Przemo <info_at_opsbielany.waw.pl>
Krystian Biesaga <krystian4842_at_gmail.com>
Maciej Gryniuk <maciejka45_at_gmail.com>
Micha VonFlynee <vonflynee_at_gmail.com>
Portuguese
Alexandre Badalo <alexandre.badalo_at_sapo.pt>
Joo Rodrigues <geral_at_jonilive.com>
Pedro Ribeiro <p.m42.ribeiro_at_gmail.com>
Sandro Amaral <sandro123iv_at_gmail.com>
Portuguese (Brazil)
Alex Rohleder <alexrohleder96_at_outlook.com>
bruno mendax <brunomendax_at_gmail.com>
Danilo GUia <danilo.eng_at_globomail.com>
Douglas Rafael Morais Kollar <douglas.kollar_at_pg.df.gov.br>
Douglas Eccker <douglaseccker_at_hotmail.com>
Ed Jr <edjacobjunior_at_gmail.com>
Guilherme Souza Silva <g.szsilva_at_gmail.com>
Guilherme Seibt <gui_at_webseibt.net>
Helder Santana <helder.bs.santana_at_gmail.com>
Junior Zancan <jrzancan_at_hotmail.com>
Luis <luis.eduardo.braschi_at_outlook.com>
Marcos Algeri <malgeri_at_gmail.com>
Renato Rodrigues de Lima Jnio <renatomdd_at_yahoo.com.br>
Thiago Casotti <thiago.casotti_at_uol.com.br>
Victor Laureano <victor.laureano_at_gmail.com>

Vincius Arajo <vinipitta_at_gmail.com>

Washington Bruno Rodrigues Cav <washingtonbruno_at_msn.com>
Yan Gabriel <yansilvagabriel_at_gmail.com>
Punjabi
Romanian
Alex <amihaita_at_yahoo.com>
Costel Cocerhan <costa1988sv_at_gmail.com>
Ion Adrian-Ionut <john_at_panevo.ro>
Raul Molnar <molnar.raul_at_wservices.eu>
Deleted User <noreply_at_weblate.org>
Stefan Murariu <stefan.murariu_at_yahoo.com>
Russian
<ddrmoscow_at_gmail.com>
<khomutov.ivan_at_mail.ru>
Alexey Rubinov <orion1979_at_yandex.ru>
<salvadoporjc_at_gmail.com>
Egorov Artyom <unlucky_at_inbox.ru>
Serbian
Smart Kid <kidsmart33_at_gmail.com>
Sinhala
Madhura Jayaratne <madhura.cj_at_gmail.com>
Slovak
Martin Lacina <martin_at_whistler.sk>
Patrik Kollmann <parkourpotex_at_gmail.com>
Jozef Pistej <pistej2_at_gmail.com>
Slovenian
Domen <mitenem_at_outlook.com>
Spanish
Luis Garca Sevillano <floss.dev_at_gmail.com>
Franco <fulanodetal.github1_at_openaliasbox.org>
Luis Ruiz <luisan00_at_hotmail.com>
Macofe <macofe.languagetool_at_gmail.com>
Matas Bellone <matiasbellone+weblate_at_gmail.com>

Rodrigo A. <ra4_at_openmailbox.org>
FAMMA TV NOTICIAS MEDIOS DE CO <revistafammatvmusic.oficial_at_gmail.com>
Ronnie Simon <ronniesimonf_at_gmail.com>
Swedish
Anders Jonsson <anders.jonsson_at_norsjovallen.se>
Tamil
<GANESHTHEONE_at_gmail.com>
Achchuthan Yogarajah <achch1990_at_gmail.com>
Rifthy Ahmed <rifthy456_at_gmail.com>
Thai
<nontawat39_at_gmail.com>
Somthanat W. <somthanat_at_gmail.com>
Turkish
Burak Yavuz <hitowerdigit_at_hotmail.com>
Ukrainian
<nitrotoll_at_gmail.com>
Igor <vmta_at_yahoo.com>
Vitaliy Perekupka <vperekupka_at_gmail.com>
Vietnamese
Bao Phan <baophan94_at_icloud.com>
Xuan Hung <mr.hungdx_at_gmail.com>
Bao trinh minh <trinhminhbao_at_gmail.com>
West Flemish
Documentation translators
Following people have contributed to translation of phpMyAdmin documentation:

Albanian
Arben okaj <acokaj_at_shkoder.net>
Arabic
Ahmed El Azzabi <ahmedtek1993_at_gmail.com>
Omar Essam <omar_2412_at_live.com>
Armenian
Azerbaijani

Mirclal <01youknowme_at_gmail.com>
Sevdimali Isa <sevdimaliisayev_at_mail.ru>
Catalan
josep constanti <jconstanti_at_yahoo.es>
Joan Montan <joan_at_montane.cat>
Xavier Navarro <xvnavarro_at_gmail.com>
Chinese (China)
Vincent Lau <3092849_at_qq.com>
<6375lpd_at_gmail.com>
disorderman <disorderman_at_qq.com>
ITXiaoPang <djh1017555_at_126.com>
tunnel213 <tunnel213_at_aliyun.com>
Terry Weng <wengshiyu_at_gmail.com>
whh <whhlcj_at_126.com>
Chinese (Taiwan)
Chien Wei Lin <cwlin0416_at_gmail.com>
Peter Dave Hello <xs910203_at_gmail.com>
Czech
Ale Hakl <ales_at_hakl.net>
Michal Ciha
Jan Palider <palider_at_seznam.cz>
Petr Katerink <petr.katerinak_at_gmail.com>
Danish
Aputsia Niels Janussen <aj_at_isit.gl>
Claus Svalekjaer <just.my.smtp.server_at_gmail.com>
Dutch
1. Voogt <a.voogt_at_hccnet.nl>
dingo thirteen <dingo13_at_gmail.com>
Dries Verschuere <dries.verschuere_at_outlook.com>
Stefan Koolen <nast3zz_at_gmail.com>
Ray Borggreve <ray_at_datahuis.net>
Dieter Adriaenssens <ruleant_at_users.sourceforge.net>
Tom Hofman <tom.hofman_at_gmail.com>
Estonian
Kristjan Rts <kristjanrats_at_gmail.com>
10.3. Documentation translators 153

Finnish
Juha <jremes_at_outlook.com>
French
Cdric Corazza <cedric.corazza_at_wanadoo.fr>
tienne Gilli <etienne.gilli_at_gmail.com>
Donavan_Martin <mart.donavan_at_hotmail.com>
Frisian
Galician
Xos Calvo <xosecalvo_at_gmail.com>
German
Daniel <d.gnauk89_at_googlemail.com>
JH M <janhenrikm_at_yahoo.de>
Lasse Goericke <lasse_at_mydom.de>
Michael Koch <michael.koch_at_enough.de>
Ann + J.M. <phpMyAdmin_at_ZweiSteinSoft.de>
Niemand Jedermann <predatorix_at_web.de>
Phillip Rohmberger <rohmberger_at_hotmail.de>
Hauke Henningsen <sqrt_at_entless.org>
Greek
oo <papaz_p_at_yahoo.com>
Hungarian
Balzs r <urbalazs_at_gmail.com>
Italian
Francesco Saverio Giacobazzi <francesco.giacobazzi_at_ferrania.it>
Marco Pozzato <ironpotts_at_gmail.com>
Stefano Martinelli <stefano.ste.martinelli_at_gmail.com>
TWS <tablettws_at_gmail.com>
Japanese
Eshin Kunishima <ek_at_luna.miko.im>
Hiroshi Chiyokawa <hiroshi.chiyokawa_at_gmail.com>
Lithuanian
Jur Kis <atvejis_at_gmail.com>
Dovydas <dovy.buz_at_gmail.com>
Norwegian Bokml

Tor Stokkan <danorse_at_gmail.com>

Kurt Eilertsen <kurt_at_kheds.com>
Portuguese (Brazil)
Alexandre Moretti <alemoretti2010_at_hotmail.com>
Douglas Rafael Morais Kollar <douglas.kollar_at_pg.df.gov.br>
Guilherme Seibt <gui_at_webseibt.net>
Helder Santana <helder.bs.santana_at_gmail.com>
Michal Ciha
Michel Souza <michel.ekio_at_gmail.com>
Danilo Azevedo <mrdaniloazevedo_at_gmail.com>
Thiago Casotti <thiago.casotti_at_uol.com.br>
Vincius Arajo <vinipitta_at_gmail.com>
Yan Gabriel <yansilvagabriel_at_gmail.com>
Slovak
Martin Lacina <martin_at_whistler.sk>
Michal Ciha
Jozef Pistej <pistej2_at_gmail.com>
Slovenian
Domen <mitenem_at_outlook.com>
Spanish
Luis Garca Sevillano <floss.dev_at_gmail.com>
Franco <fulanodetal.github1_at_openaliasbox.org>
Matas Bellone <matiasbellone+weblate_at_gmail.com>
Ronnie Simon <ronniesimonf_at_gmail.com>
Turkish
Burak Yavuz <hitowerdigit_at_hotmail.com>
Original Credits of Version 2.1.0
This work is based on Peter Kuppelwiesers MySQL-Webadmin. It was his idea to create a web-based interface to
MySQL using PHP3. Although I have not used any of his source-code, there are some concepts Ive borrowed from
him. phpMyAdmin was created because Peter told me he wasnt going to further develop his (great) tool.
Thanks go to
Amalesh Kempf <ak-lsml_at_living-source.com> who contributed the code for the check when dropping a
table or database. He also suggested that you should be able to specify the primary key on tbl_create.php3. To
version 1.1.1 he contributed the ldi_*.php3-set (Import text-files) as well as a bug-report. Plus many smaller
improvements.
10.4. Original Credits of Version 2.1.0 155

Jan Legenhausen <jan_at_nrw.net>: He made many of the changes that were introduced in 1.3.0 (including
quite significant ones like the authentication). For 1.4.1 he enhanced the table-dump feature. Plus bug-fixes and
help.
Marc Delisle <DelislMa_at_CollegeSherbrooke.qc.ca> made phpMyAdmin language-independent by outsourc-
ing the strings to a separate file. He also contributed the French translation.
Alexandr Bravo <abravo_at_hq.admiral.ru> who contributed tbl_select.php3, a feature to display only some
columns from a table.
Chris Jackson <chrisj_at_ctel.net> added support for MySQL functions in tbl_change.php3. He also added the
Query by Example feature in 2.0.
Dave Walton <walton_at_nordicdms.com> added support for multiple servers and is a regular contributor for
bug-fixes.
Gabriel Ash <ga244_at_is8.nyu.edu> contributed the random access features for 2.0.6.
The following people have contributed minor changes, enhancements, bugfixes or support for a new language:
Jim Kraai, Jordi Bruguera, Miquel Obrador, Geert Lund, Thomas Kleemann, Alexander Leidinger, Kiko Albiol, Daniel
C. Chao, Pavel Piankov, Sascha Kettler, Joe Pruett, Renato Lins, Mark Kronsbein, Jannis Hermanns, G. Wieggers.
And thanks to everyone else who sent me email with suggestions, bug- reports and or just some feedback.

CHAPTER 11
Glossary
From Wikipedia, the free encyclopedia

.htaccess the default name of Apaches directory-level configuration file.
See also:
<https://en.wikipedia.org/wiki/.htaccess>
ACL Access Contol List
Blowfish a keyed, symmetric block cipher, designed in 1993 by Bruce Schneier.
See also:
<https://en.wikipedia.org/wiki/Blowfish_(cipher)>
Browser a software application that enables a user to display and interact with text, images, and other information
typically located on a web page at a website on the World Wide Web.
See also:
<https://en.wikipedia.org/wiki/Web_browser>
bzip2 a free software/open source data compression algorithm and program developed by Julian Seward.
See also:
<https://en.wikipedia.org/wiki/Bzip2>
CGI Common Gateway Interface is an important World Wide Web technology that enables a client web browser to
request data from a program executed on the Web server.
See also:
<https://en.wikipedia.org/wiki/CGI>
Changelog a log or record of changes made to a project.
See also:
<https://en.wikipedia.org/wiki/Changelog>
157
Client a computer system that accesses a (remote) service on another computer by some kind of network.
See also:
<https://en.wikipedia.org/wiki/Client_(computing)>
column a set of data values of a particular simple type, one for each row of the table.
See also:
<https://en.wikipedia.org/wiki/Column_(database)>
Cookie a packet of information sent by a server to a World Wide Web browser and then sent back by the browser
each time it accesses that server.
See also:
<https://en.wikipedia.org/wiki/HTTP_cookie>
CSV Comma- separated values
See also:
<https://en.wikipedia.org/wiki/Comma-separated_values>
DB look at database
database an organized collection of data.
See also:
<https://en.wikipedia.org/wiki/Database>
Engine look at storage engines
extension a PHP module that extends PHP with additional functionality.
See also:
<https://en.wikipedia.org/wiki/Software_extension>
FAQ Frequently Asked Questions is a list of commonly asked question and there answers.
See also:
<https://en.wikipedia.org/wiki/FAQ>
Field one part of divided data/columns.
See also:
<https://en.wikipedia.org/wiki/Field_(computer_science)>
foreign key a column or group of columns in a database row that point to a key column or group of columns forming
a key of another database row in some (usually different) table.
See also:
<https://en.wikipedia.org/wiki/Foreign_key>
FPDF the free PDF library
See also:
<http://www.fpdf.org/>
GD Graphics Library by Thomas Boutell and others for dynamically manipulating images.
See also:
<https://en.wikipedia.org/wiki/GD_Graphics_Library>
158 Chapter 11. Glossary

GD2 look at gd
gzip gzip is short for GNU zip, a GNU free software file compression program.
See also:
<https://en.wikipedia.org/wiki/Gzip>
host any machine connected to a computer network, a node that has a hostname.
See also:
<https://en.wikipedia.org/wiki/Host>
hostname the unique name by which a network attached device is known on a network.
See also:
<https://en.wikipedia.org/wiki/Hostname>
HTTP HyperText Transfer Protocol is the primary method used to transfer or convey information on the World Wide
Web.
See also:
<https://en.wikipedia.org/wiki/HyperText_Transfer_Protocol>
https a HTTP-connection with additional security measures.
See also:
<https://en.wikipedia.org/wiki/Https:_URI_scheme>
IEC International Electrotechnical Commission
IIS Internet Information Services is a set of Internet-based services for servers using Microsoft Windows.
See also:
<https://en.wikipedia.org/wiki/Internet_Information_Services>
Index a feature that allows quick access to the rows in a table.
See also:
<https://en.wikipedia.org/wiki/Index_(database)>
IP Internet Protocol is a data-oriented protocol used by source and destination hosts for communicating data across
a packet-switched internetwork.
See also:
<https://en.wikipedia.org/wiki/Internet_Protocol>
IP Address a unique number that devices use in order to identify and communicate with each other on a network
utilizing the Internet Protocol standard.
See also:
<https://en.wikipedia.org/wiki/IP_Address>
IPv6 IPv6 (Internet Protocol version 6) is the latest revision of the Internet Protocol (IP), designed to deal with the
long-anticipated problem of its precedessor IPv4 running out of addresses.
See also:
<https://en.wikipedia.org/wiki/IPv6>
159
ISAPI Internet Server Application Programming Interface is the API of Internet Information Services (IIS).
See also:
<https://en.wikipedia.org/wiki/ISAPI>
ISP Internet service provider is a business or organization that offers users access to the Internet and related services.
See also:
<https://en.wikipedia.org/wiki/ISP>
ISO International Standards Organisation
JPEG a most commonly used standard method of lossy compression for photographic images.
See also:
<https://en.wikipedia.org/wiki/JPEG>
JPG look at jpeg
Key look at index
LATEX a document preparation system for the TEX typesetting program.
See also:
<https://en.wikipedia.org/wiki/LaTeX>
Mac Apple Macintosh is line of personal computers is designed, developed, manufactured, and marketed by Apple
Computer.
. seealso:: <https://en.wikipedia.org/wiki/Mac>
Mac OS X the operating system which is included with all currently shipping Apple Macintosh computers in the
consumer and professional markets.
See also:
<https://en.wikipedia.org/wiki/Mac_OS_X>
mbstring The PHP mbstring functions provide support for languages represented by multi-byte character sets, most
notably UTF-8.
If you have troubles installing this extension, please follow 1.20 I receive an error about missing mysqli and
mysql extensions., it provides useful hints.
See also:
<https://secure.php.net/manual/en/book.mbstring.php>
MCrypt a cryptographic library.
See also:
<https://en.wikipedia.org/wiki/MCrypt>
mcrypt the MCrypt PHP extension.
See also:
<https://secure.php.net/mcrypt>
MIME Multipurpose Internet Mail Extensions is an Internet Standard for the format of e-mail.
See also:
<https://en.wikipedia.org/wiki/MIME>

module some sort of extension for the Apache Webserver.

See also:
<https://en.wikipedia.org/wiki/Apache_HTTP_Server>
mod_proxy_fcgi an Apache module implmenting a Fast CGI interface; PHP can be run as a CGI module, FastCGI,
or directly as an Apache module.
MySQL a multithreaded, multi-user, SQL (Structured Query Language) Database Management System (DBMS).
See also:
<https://en.wikipedia.org/wiki/MySQL>
mysqli the improved MySQL client PHP extension.
See also:
<https://secure.php.net/manual/en/book.mysqli.php>
mysql the MySQL client PHP extension.
See also:
<https://secure.php.net/manual/en/book.mysql.php>
OpenDocument open standard for office documents.
See also:
<https://en.wikipedia.org/wiki/OpenDocument>
OS X look at Mac OS X.
See also:
<https://en.wikipedia.org/wiki/OS_X>
PDF Portable Document Format is a file format developed by Adobe Systems for representing two dimensional
documents in a device independent and resolution independent format.
See also:
<https://en.wikipedia.org/wiki/Portable_Document_Format>
PEAR the PHP Extension and Application Repository.
See also:
<https://pear.php.net/>
PCRE Perl Compatible Regular Expressions is the perl-compatible regular expression functions for PHP
See also:
<https://secure.php.net/pcre>
PHP short for PHP: Hypertext Preprocessor, is an open-source, reflective programming language used mainly for
developing server-side applications and dynamic web content, and more recently, a broader range of software
applications.
See also:
<https://en.wikipedia.org/wiki/PHP>
port a connection through which data is sent and received.
See also:
161
<https://en.wikipedia.org/wiki/Port_(computing)>
primary key A primary key is an index over one or more fields in a table with unique values for each single row in
this table. Every table should have a primary key for easier accessing/identifying data in this table. There can
only be one primary key per table and it is named always PRIMARY. In fact a primary key is just an unique
key with the name PRIMARY. If no primary key is defined MySQL will use first unique key as primary key if
there is one.
You can create the primary key when creating the table (in phpMyAdmin just check the primary key radio
buttons for each field you wish to be part of the primary key).
You can also add a primary key to an existing table with ALTER TABLE or CREATE INDEX (in phpMyAdmin
you can just click on add index on the table structure page below the listed fields).
RFC Request for Comments (RFC) documents are a series of memoranda encompassing new research, innovations,
and methodologies applicable to Internet technologies.
See also:
<https://en.wikipedia.org/wiki/Request_for_Comments>
RFC 1952 GZIP file format specification version 4.3
See also:
RFC 1952
Row (record, tuple) represents a single, implicitly structured data item in a table.
See also:
<https://en.wikipedia.org/wiki/Row_(database)>
Server a computer system that provides services to other computing systems over a network.
See also:
<https://en.wikipedia.org/wiki/Server_(computing)>
Storage Engines MySQL can use several different formats for storing data on disk, these are called storage engines
or table types. phpMyAdmin allows a user to change their storage engine for a particular table through the
operations tab.
Common table types are InnoDB and MyISAM, though many others exist and may be desirable in some situa-
tions.
See also:
<https://dev.mysql.com/doc/refman/5.7/en/storage-engines.html>
socket a form of inter-process communication.
See also:
<https://en.wikipedia.org/wiki/Unix_domain_socket>
SSL Secure Sockets Layer is a cryptographic protocol which provides secure communication on the Internet.
See also:
<https://en.wikipedia.org/wiki/Secure_Sockets_Layer>
Stored procedure a subroutine available to applications accessing a relational database system
See also:
<https://en.wikipedia.org/wiki/Stored_procedure>

SQL Structured Query Language

See also:
<https://en.wikipedia.org/wiki/SQL>
table a set of data elements (cells) that is organized, defined and stored as horizontal rows and vertical columns where
each item can be uniquely identified by a label or key or by it?s position in relation to other items.
See also:
<https://en.wikipedia.org/wiki/Table_(database)>
tar a type of archive file format: the Tape ARchive format.
See also:
<https://en.wikipedia.org/wiki/Tar_(file_format)>
TCP Transmission Control Protocol is one of the core protocols of the Internet protocol suite.
See also:
<https://en.wikipedia.org/wiki/TCP>
TCPDF Rewrite of UFPDF with various improvements.
See also:
<https://tcpdf.org/>
trigger a procedural code that is automatically executed in response to certain events on a particular table or view in
a database
See also:
<https://en.wikipedia.org/wiki/Database_trigger>
unique key An unique key is an index over one or more fields in a table which has a unique value for each row. The
first unique key will be treated as primary key if there is no primary key defined.
UFPDF Unicode/UTF-8 extension for FPDF
See also:
<https://acko.net/blog/ufpdf-unicode-utf-8-extension-for-fpdf/>
URL Uniform Resource Locator is a sequence of characters, conforming to a standardized format, that is used for
referring to resources, such as documents and images on the Internet, by their location.
See also:
<https://en.wikipedia.org/wiki/URL>
Webserver A computer (program) that is responsible for accepting HTTP requests from clients and serving them
Web pages.
See also:
<https://en.wikipedia.org/wiki/Webserver>
XML Extensible Markup Language is a W3C-recommended general- purpose markup language for creating special-
purpose markup languages, capable of describing many different kinds of data.
See also:
<https://en.wikipedia.org/wiki/XML>
163
ZIP a popular data compression and archival format.

See also:
<https://en.wikipedia.org/wiki/ZIP_(file_format)>
zlib an open-source, cross- platform data compression library by Jean-loup Gailly and Mark Adler.
See also:
<https://en.wikipedia.org/wiki/Zlib>

CHAPTER 12
Indices and tables
genindex
search
Glossary
165
166 Chapter 12. Indices and tables

Index
Symbols $cfg[EnableAutocompleteForTablesAndColumns], 68
.htaccess, 157 $cfg[ExecTimeLimit], 49, 120
$cfg[ActionLinksMode], 58 $cfg[Export], 61
$cfg[AllowArbitraryServer], 9, 19, 52 $cfg[Export][charset], 61, 64
$cfg[AllowThirdPartyFraming], 29 $cfg[Export][file_template_database], 61
$cfg[AllowUserDropDatabase], 50 $cfg[Export][file_template_server], 61
$cfg[ArbitraryServerRegexp], 52 $cfg[Export][file_template_table], 61
$cfg[AvailableCharsets], 64 $cfg[Export][format], 61
$cfg[BZipDump], 60 $cfg[Export][method], 61
$cfg[BrowseMIME], 71 $cfg[FilterLanguages], 64
$cfg[BrowseMarkerEnable], 66 $cfg[FirstLevelNavigationItems], 53
$cfg[BrowsePointerEnable], 66 $cfg[ForceSSL], 49
$cfg[CSPAllow], 65 $cfg[ForeignKeyDropdownOrder], 60
$cfg[CaptchaLoginPrivateKey], 25, 52 $cfg[ForeignKeyMaxLimit], 60, 125
$cfg[CaptchaLoginPublicKey], 25, 52 $cfg[GD2Available], 65
$cfg[CharEditing], 67, 68 $cfg[GZipDump], 60
$cfg[CharTextareaCols], 68 $cfg[GridEditing], 59
$cfg[CharTextareaRows], 68 $cfg[HideStructureActions], 58
$cfg[CheckConfigurationPermissions], 65 $cfg[IconvExtraParams], 64
$cfg[CodemirrorEnable], 50 $cfg[IgnoreMultiSubmitErrors], 50
$cfg[CompressOnFly], 60, 113 $cfg[Import], 62
$cfg[Confirm], 50 $cfg[Import][charset], 62, 64
$cfg[ConsoleEnterExecutes], 29 $cfg[InitialSlidersState], 72
$cfg[DBG], 74 $cfg[InsertRows], 60
$cfg[DBG][demo], 74 $cfg[Lang], 64
$cfg[DBG][sql], 74 $cfg[LimitChars], 66
$cfg[DBG][sqllog], 74 $cfg[LinkLengthLimit], 65
$cfg[DefaultConnectionCollation], 63 $cfg[LoginCookieDeleteAll], 51
$cfg[DefaultForeignKeyChecks], 50 $cfg[LoginCookieRecall], 51
$cfg[DefaultFunctions], 73 $cfg[LoginCookieStore], 51
$cfg[DefaultLang], 63 $cfg[LoginCookieValidity], 51
$cfg[DefaultQueryDatabase], 73 $cfg[LoginCookieValidityDisableWarning], 28
$cfg[DefaultQueryTable], 73 $cfg[LongtextDoubleTextarea], 68
$cfg[DefaultTabDatabase], 62 $cfg[MaxCharactersInDisplayedSQL], 48
$cfg[DefaultTabServer], 62 $cfg[MaxDbList], 48
$cfg[DefaultTabTable], 63 $cfg[MaxExactCount], 71, 115
$cfg[DisableMultiTableMaintenance], 66 $cfg[MaxExactCountViews], 72
$cfg[DisableShortcutKeys], 47 $cfg[MaxNavigationItems], 53
$cfg[DisplayServersList], 55 $cfg[MaxRows], 58
$cfg[MaxSizeForInputField], 68
167
$cfg[MaxTableList], 48 $cfg[SQLQuery][ShowAsPHP], 69
$cfg[MemoryLimit], 49 $cfg[SaveCellsAtOnce], 59
$cfg[MinSizeForInputField], 68 $cfg[SaveDir], 70, 96
$cfg[MysqlMinVersion], 57 $cfg[SendErrorReports], 29
$cfg[NaturalOrder], 72 $cfg[ServerDefault], 47
$cfg[NavigationDisplayLogo], 54 $cfg[ServerLibraryDifference_DisableWarning], 28
$cfg[NavigationDisplayServers], 55 $cfg[Servers], 18, 29, 30, 78
$cfg[NavigationLinkWithMainPanel], 54 $cfg[Servers][$i][AllowDeny][order], 24, 44, 65
$cfg[NavigationLogoLink], 54 $cfg[Servers][$i][AllowDeny][rules], 24, 25, 44, 65,
$cfg[NavigationLogoLinkWindow], 54 117
$cfg[NavigationTreeDbSeparator], 53 $cfg[Servers][$i][AllowNoPassword], 44
$cfg[NavigationTreeDefaultTabTable], 39, 40, 55 $cfg[Servers][$i][AllowRoot], 25, 44
$cfg[NavigationTreeDefaultTabTable2], 55 $cfg[Servers][$i][DisableIS], 45
$cfg[NavigationTreeDisplayDbFilterMinimum], 54 $cfg[Servers][$i][LogoutURL], 47
$cfg[NavigationTreeDisplayItemFilterMinimum], 54 $cfg[Servers][$i][MaxTableUiprefs], 43
$cfg[NavigationTreeEnableExpansion], 55 $cfg[Servers][$i][SessionTimeZone], 43
$cfg[NavigationTreeEnableGrouping], 53 $cfg[Servers][$i][SignonCookieParams], 19, 24, 46
$cfg[NavigationTreePointerEnable], 66 $cfg[Servers][$i][SignonScript], 19, 23, 24, 4547
$cfg[NavigationTreeShowEvents], 56 $cfg[Servers][$i][SignonSession], 19, 24, 46
$cfg[NavigationTreeShowFunctions], 56 $cfg[Servers][$i][SignonURL], 19, 24, 47
$cfg[NavigationTreeShowProcedures], 56 $cfg[Servers][$i][auth_http_realm], 34
$cfg[NavigationTreeShowTables], 56 $cfg[Servers][$i][auth_type], 24, 34, 35
$cfg[NavigationTreeShowViews], 56 $cfg[Servers][$i][bookmarktable], 36
$cfg[NavigationTreeTableLevel], 53 $cfg[Servers][$i][central_columns], 41
$cfg[NavigationTreeTableSeparator], 53, 114 $cfg[Servers][$i][column_info], 38
$cfg[NumFavoriteTables], 40, 54, 127 $cfg[Servers][$i][compress], 33
$cfg[NumRecentTables], 39, 53 $cfg[Servers][$i][connect_type], 33
$cfg[OBGzip], 64, 101, 106, 111 $cfg[Servers][$i][control_*], 33, 34
$cfg[Order], 59 $cfg[Servers][$i][controlhost], 33, 34
$cfg[PDFDefaultPageSize], 63 $cfg[Servers][$i][controlpass], 17, 33, 116
$cfg[PDFPageSizes], 63 $cfg[Servers][$i][controlport], 33, 34
$cfg[PersistentConnections], 48 $cfg[Servers][$i][controluser], 17, 18, 33, 116
$cfg[PmaAbsoluteUri], 10, 27, 49, 109, 111, 112, 117, $cfg[Servers][$i][designer_settings], 41
119 $cfg[Servers][$i][export_templates], 42
$cfg[PmaNoRelation_DisableWarning], 28 $cfg[Servers][$i][extension], 36
$cfg[PropertiesNumColumns], 62 $cfg[Servers][$i][favorite], 39, 40
$cfg[ProtectBinary], 59 $cfg[Servers][$i][hide_db], 35
$cfg[ProxyPass], 48 $cfg[Servers][$i][history], 39, 71
$cfg[ProxyUrl], 47 $cfg[Servers][$i][host], 9, 30, 31, 33, 35
$cfg[ProxyUser], 48 $cfg[Servers][$i][navigationhiding], 41
$cfg[QueryHistoryDB], 71 $cfg[Servers][$i][nopassword], 35
$cfg[QueryHistoryMax], 39, 71 $cfg[Servers][$i][only_db], 35
$cfg[RecodingEngine], 64 $cfg[Servers][$i][password], 24, 35
$cfg[RelationalDisplay], 59 $cfg[Servers][$i][pdf_pages], 38
$cfg[RememberSorting], 40, 67 $cfg[Servers][$i][pmadb], 28, 34, 3643, 54
$cfg[RepeatCells], 71 $cfg[Servers][$i][port], 30
$cfg[ReservedWordDisableWarning], 28 $cfg[Servers][$i][recent], 39
$cfg[RetainQueryBox], 50 $cfg[Servers][$i][relation], 36, 37
$cfg[RowActionLinks], 67 $cfg[Servers][$i][savedsearches], 41, 42
$cfg[RowActionLinksWithoutUnique], 67 $cfg[Servers][$i][socket], 30, 111
$cfg[RowActionType], 58 $cfg[Servers][$i][ssl], 3134, 79
$cfg[SQLQuery][Edit], 69 $cfg[Servers][$i][ssl_ca], 3134, 79
$cfg[SQLQuery][Explain], 69 $cfg[Servers][$i][ssl_ca_path], 3134
$cfg[SQLQuery][Refresh], 69 $cfg[Servers][$i][ssl_cert], 3134, 79
168 Index
$cfg[Servers][$i][ssl_ciphers], 3134 $cfg[UseDbSearch], 50

$cfg[Servers][$i][ssl_key], 3134, 79 $cfg[UserprefsDeveloperTab], 72
$cfg[Servers][$i][ssl_verify], 3134, 79 $cfg[UserprefsDisallow], 29, 72
$cfg[Servers][$i][table_coords], 37, 38, 88 $cfg[VersionCheck], 47
$cfg[Servers][$i][table_info], 37 $cfg[ZeroConf], 16, 54
$cfg[Servers][$i][table_uiprefs], 40, 43 $cfg[ZipDump], 60
$cfg[Servers][$i][tracking], 42 $cfg[blowfish_secret], 51
$cfg[Servers][$i][tracking_add_drop_database], 43
$cfg[Servers][$i][tracking_add_drop_table], 43 A
$cfg[Servers][$i][tracking_add_drop_view], 43 ACL, 157
$cfg[Servers][$i][tracking_default_statements], 42 ActionLinksMode, 58
$cfg[Servers][$i][tracking_version_auto_create], 42 AllowArbitraryServer, 52
$cfg[Servers][$i][user], 24, 35 AllowDeny, order, 44
$cfg[Servers][$i][userconfig], 43 AllowDeny, rules, 44
$cfg[Servers][$i][usergroups], 40, 84 AllowNoPassword, 44
$cfg[Servers][$i][users], 40 AllowRoot, 44
$cfg[Servers][$i][verbose], 10, 35, 36, 56, 126 AllowThirdPartyFraming, 29
$cfg[SessionSavePath], 49 AllowUserDropDatabase, 50
$cfg[ShowAll], 58 ArbitraryServerRegexp, 52
$cfg[ShowBrowseComments], 67 auth_http_realm, 34
$cfg[ShowChgPassword], 57 auth_type, 34
$cfg[ShowCreateDb], 57 Authentication mode, 18
$cfg[ShowDatabasesNavigationAsTree], 53 Config, 24
$cfg[ShowDbStructureCreation], 57 Cookie, 19
$cfg[ShowDbStructureLastCheck], 58 HTTP, 18
$cfg[ShowDbStructureLastUpdate], 57 Signon, 19
$cfg[ShowFieldTypesInDataEditView], 60 AvailableCharsets, 64
$cfg[ShowFunctionFields], 59
$cfg[ShowGitRevision], 57 B
$cfg[ShowHint], 48 Blowfish, 157
$cfg[ShowPhpInfo], 56 blowfish_secret, 51
$cfg[ShowPropertyComments], 67 bookmarktable, 36
$cfg[ShowSQL], 49 BrowseMarkerEnable, 66
$cfg[ShowServerInfo], 56 BrowseMIME, 71
$cfg[ShowStats], 56 BrowsePointerEnable, 66
$cfg[SkipLockedTables], 49 Browser, 157
$cfg[SuhosinDisableWarning], 28, 108 bzip2, 157
$cfg[TableNavigationLinksMode], 58 BZipDump, 60
$cfg[TablePrimaryKeyOrder], 67
$cfg[TabsMode], 62 C
$cfg[TempDir], 70, 102, 126 CaptchaLoginPrivateKey, 52
$cfg[TextareaAutoSelect], 68 CaptchaLoginPublicKey, 52
$cfg[TextareaCols], 68 central_columns, 41
$cfg[TextareaRows], 68 CGI, 157
$cfg[ThemeDefault], 73, 112 Changelog, 157
$cfg[ThemeManager], 73, 112 CharEditing, 67
$cfg[ThemePerServer], 73 CharTextareaCols, 68
$cfg[TitleDatabase], 72 CharTextareaRows, 68
$cfg[TitleDefault], 73 CheckConfigurationPermissions, 65
$cfg[TitleServer], 72 Client, 158
$cfg[TitleTable], 72 CodemirrorEnable, 50
$cfg[TranslationWarningThreshold], 29 column, 158
$cfg[TrustedProxies], 44, 65 column_info, 38
$cfg[UploadDir], 69, 94, 103, 126 comment (global variable or constant), 97
Index 169
compress, 33 $cfg[FirstLevelNavigationItems], 53
CompressOnFly, 60 $cfg[ForceSSL], 49
Config $cfg[ForeignKeyDropdownOrder], 60
Authentication mode, 24 $cfg[ForeignKeyMaxLimit], 60, 125
config.inc.php, 26 $cfg[GD2Available], 65
configuration option $cfg[GZipDump], 60
$cfg[ActionLinksMode], 58 $cfg[GridEditing], 59
$cfg[AllowArbitraryServer], 9, 19, 52 $cfg[HideStructureActions], 58
$cfg[AllowThirdPartyFraming], 29 $cfg[IconvExtraParams], 64
$cfg[AllowUserDropDatabase], 50 $cfg[IgnoreMultiSubmitErrors], 50
$cfg[ArbitraryServerRegexp], 52 $cfg[Import], 62
$cfg[AvailableCharsets], 64 $cfg[Import][charset], 62, 64
$cfg[BZipDump], 60 $cfg[InitialSlidersState], 72
$cfg[BrowseMIME], 71 $cfg[InsertRows], 60
$cfg[BrowseMarkerEnable], 66 $cfg[Lang], 64
$cfg[BrowsePointerEnable], 66 $cfg[LimitChars], 66
$cfg[CSPAllow], 65 $cfg[LinkLengthLimit], 65
$cfg[CaptchaLoginPrivateKey], 25, 52 $cfg[LoginCookieDeleteAll], 51
$cfg[CaptchaLoginPublicKey], 25, 52 $cfg[LoginCookieRecall], 51
$cfg[CharEditing], 67, 68 $cfg[LoginCookieStore], 51
$cfg[CharTextareaCols], 68 $cfg[LoginCookieValidity], 51
$cfg[CharTextareaRows], 68 $cfg[LoginCookieValidityDisableWarning], 28
$cfg[CheckConfigurationPermissions], 65 $cfg[LongtextDoubleTextarea], 68
$cfg[CodemirrorEnable], 50 $cfg[MaxCharactersInDisplayedSQL], 48
$cfg[CompressOnFly], 60, 113 $cfg[MaxDbList], 48
$cfg[Confirm], 50 $cfg[MaxExactCount], 71, 115
$cfg[ConsoleEnterExecutes], 29 $cfg[MaxExactCountViews], 72
$cfg[DBG], 74 $cfg[MaxNavigationItems], 53
$cfg[DBG][demo], 74 $cfg[MaxRows], 58
$cfg[DBG][sql], 74 $cfg[MaxSizeForInputField], 68
$cfg[DBG][sqllog], 74 $cfg[MaxTableList], 48
$cfg[DefaultConnectionCollation], 63 $cfg[MemoryLimit], 49
$cfg[DefaultForeignKeyChecks], 50 $cfg[MinSizeForInputField], 68
$cfg[DefaultFunctions], 73 $cfg[MysqlMinVersion], 57
$cfg[DefaultLang], 63 $cfg[NaturalOrder], 72
$cfg[DefaultQueryDatabase], 73 $cfg[NavigationDisplayLogo], 54
$cfg[DefaultQueryTable], 73 $cfg[NavigationDisplayServers], 55
$cfg[DefaultTabDatabase], 62 $cfg[NavigationLinkWithMainPanel], 54
$cfg[DefaultTabServer], 62 $cfg[NavigationLogoLink], 54
$cfg[DefaultTabTable], 63 $cfg[NavigationLogoLinkWindow], 54
$cfg[DisableMultiTableMaintenance], 66 $cfg[NavigationTreeDbSeparator], 53
$cfg[DisableShortcutKeys], 47 $cfg[NavigationTreeDefaultTabTable], 39, 40, 55
$cfg[DisplayServersList], 55 $cfg[NavigationTreeDefaultTabTable2], 55
$cfg[EnableAutocompleteForTablesAndColumns], $cfg[NavigationTreeDisplayDbFilterMinimum],
68 54
$cfg[ExecTimeLimit], 49, 120 $cfg[NavigationTreeDisplayItemFilterMinimum],
$cfg[Export], 61 54
$cfg[Export][charset], 61, 64 $cfg[NavigationTreeEnableExpansion], 55
$cfg[Export][file_template_database], 61 $cfg[NavigationTreeEnableGrouping], 53
$cfg[Export][file_template_server], 61 $cfg[NavigationTreePointerEnable], 66
$cfg[Export][file_template_table], 61 $cfg[NavigationTreeShowEvents], 56
$cfg[Export][format], 61 $cfg[NavigationTreeShowFunctions], 56
$cfg[Export][method], 61 $cfg[NavigationTreeShowProcedures], 56
$cfg[FilterLanguages], 64 $cfg[NavigationTreeShowTables], 56
170 Index
$cfg[NavigationTreeShowViews], 56 $cfg[Servers][$i][SignonSession], 19, 24, 46

$cfg[NavigationTreeTableLevel], 53 $cfg[Servers][$i][SignonURL], 19, 24, 47
$cfg[NavigationTreeTableSeparator], 53, 114 $cfg[Servers][$i][auth_http_realm], 34
$cfg[NumFavoriteTables], 40, 54, 127 $cfg[Servers][$i][auth_type], 24, 34, 35
$cfg[NumRecentTables], 39, 53 $cfg[Servers][$i][bookmarktable], 36
$cfg[OBGzip], 64, 101, 106, 111 $cfg[Servers][$i][central_columns], 41
$cfg[Order], 59 $cfg[Servers][$i][column_info], 38
$cfg[PDFDefaultPageSize], 63 $cfg[Servers][$i][compress], 33
$cfg[PDFPageSizes], 63 $cfg[Servers][$i][connect_type], 33
$cfg[PersistentConnections], 48 $cfg[Servers][$i][control_*], 33, 34
$cfg[PmaAbsoluteUri], 10, 27, 49, 109, 111, 112, $cfg[Servers][$i][controlhost], 33, 34
117, 119 $cfg[Servers][$i][controlpass], 17, 33, 116
$cfg[PmaNoRelation_DisableWarning], 28 $cfg[Servers][$i][controlport], 33, 34
$cfg[PropertiesNumColumns], 62 $cfg[Servers][$i][controluser], 17, 18, 33, 116
$cfg[ProtectBinary], 59 $cfg[Servers][$i][designer_settings], 41
$cfg[ProxyPass], 48 $cfg[Servers][$i][export_templates], 42
$cfg[ProxyUrl], 47 $cfg[Servers][$i][extension], 36
$cfg[ProxyUser], 48 $cfg[Servers][$i][favorite], 39, 40
$cfg[QueryHistoryDB], 71 $cfg[Servers][$i][hide_db], 35
$cfg[QueryHistoryMax], 39, 71 $cfg[Servers][$i][history], 39, 71
$cfg[RecodingEngine], 64 $cfg[Servers][$i][host], 9, 30, 31, 33, 35
$cfg[RelationalDisplay], 59 $cfg[Servers][$i][navigationhiding], 41
$cfg[RememberSorting], 40, 67 $cfg[Servers][$i][nopassword], 35
$cfg[RepeatCells], 71 $cfg[Servers][$i][only_db], 35
$cfg[ReservedWordDisableWarning], 28 $cfg[Servers][$i][password], 24, 35
$cfg[RetainQueryBox], 50 $cfg[Servers][$i][pdf_pages], 38
$cfg[RowActionLinks], 67 $cfg[Servers][$i][pmadb], 28, 34, 3643, 54
$cfg[RowActionLinksWithoutUnique], 67 $cfg[Servers][$i][port], 30
$cfg[RowActionType], 58 $cfg[Servers][$i][recent], 39
$cfg[SQLQuery][Edit], 69 $cfg[Servers][$i][relation], 36, 37
$cfg[SQLQuery][Explain], 69 $cfg[Servers][$i][savedsearches], 41, 42
$cfg[SQLQuery][Refresh], 69 $cfg[Servers][$i][socket], 30, 111
$cfg[SQLQuery][ShowAsPHP], 69 $cfg[Servers][$i][ssl], 3134, 79
$cfg[SaveCellsAtOnce], 59 $cfg[Servers][$i][ssl_ca], 3134, 79
$cfg[SaveDir], 70, 96 $cfg[Servers][$i][ssl_ca_path], 3134
$cfg[SendErrorReports], 29 $cfg[Servers][$i][ssl_cert], 3134, 79
$cfg[ServerDefault], 47 $cfg[Servers][$i][ssl_ciphers], 3134
$cfg[ServerLibraryDifference_DisableWarning], $cfg[Servers][$i][ssl_key], 3134, 79
28 $cfg[Servers][$i][ssl_verify], 3134, 79
$cfg[Servers], 18, 29, 30, 78 $cfg[Servers][$i][table_coords], 37, 38, 88
$cfg[Servers][$i][AllowDeny][order], 24, 44, $cfg[Servers][$i][table_info], 37
65 $cfg[Servers][$i][table_uiprefs], 40, 43
$cfg[Servers][$i][AllowDeny][rules], 24, 25, $cfg[Servers][$i][tracking], 42
44, 65, 117 $cfg[Servers][$i][tracking_add_drop_database],
$cfg[Servers][$i][AllowNoPassword], 44 43
$cfg[Servers][$i][AllowRoot], 25, 44 $cfg[Servers][$i][tracking_add_drop_table], 43
$cfg[Servers][$i][DisableIS], 45 $cfg[Servers][$i][tracking_add_drop_view], 43
$cfg[Servers][$i][LogoutURL], 47 $cfg[Servers][$i][tracking_default_statements],
$cfg[Servers][$i][MaxTableUiprefs], 43 42
$cfg[Servers][$i][SessionTimeZone], 43 $cfg[Servers][$i][tracking_version_auto_create],
$cfg[Servers][$i][SignonCookieParams], 19, 24, 42
46 $cfg[Servers][$i][user], 24, 35
$cfg[Servers][$i][SignonScript], 19, 23, 24, 45 $cfg[Servers][$i][userconfig], 43
47 $cfg[Servers][$i][usergroups], 40, 84
Index 171
$cfg[Servers][$i][users], 40 controluser, 33
$cfg[Servers][$i][verbose], 10, 35, 36, 56, 126 Cookie, 158
$cfg[SessionSavePath], 49 Authentication mode, 19
$cfg[ShowAll], 58 CSPAllow, 65
$cfg[ShowBrowseComments], 67 CSV, 158
$cfg[ShowChgPassword], 57
$cfg[ShowCreateDb], 57 D
$cfg[ShowDatabasesNavigationAsTree], 53 data (global variable or constant), 97
$cfg[ShowDbStructureCreation], 57 database, 158
$cfg[ShowDbStructureLastCheck], 58 database (global variable or constant), 97
$cfg[ShowDbStructureLastUpdate], 57 DB, 158
$cfg[ShowFieldTypesInDataEditView], 60 DBG, 74
$cfg[ShowFunctionFields], 59 DBG, demo, 74
$cfg[ShowGitRevision], 57 DBG, sql, 74
$cfg[ShowHint], 48 DBG, sqllog, 74
$cfg[ShowPhpInfo], 56 DefaultConnectionCollation, 63
$cfg[ShowPropertyComments], 67 DefaultForeignKeyChecks, 50
$cfg[ShowSQL], 49 DefaultFunctions, 73
$cfg[ShowServerInfo], 56 DefaultLang, 63
$cfg[ShowStats], 56 DefaultQueryDatabase, 73
$cfg[SkipLockedTables], 49 DefaultQueryTable, 73
$cfg[SuhosinDisableWarning], 28, 108 DefaultTabDatabase, 62
$cfg[TableNavigationLinksMode], 58 DefaultTabServer, 62
$cfg[TablePrimaryKeyOrder], 67 DefaultTabTable, 63
$cfg[TabsMode], 62 designer_settings, 41
$cfg[TempDir], 70, 102, 126 DisableIS, 45
$cfg[TextareaAutoSelect], 68 DisableMultiTableMaintenance, 66
$cfg[TextareaCols], 68 DisableShortcutKeys, 47
$cfg[TextareaRows], 68 DisplayServersList, 55
$cfg[ThemeDefault], 73, 112
$cfg[ThemeManager], 73, 112 E
$cfg[ThemePerServer], 73 EnableAutocompleteForTablesAndColumns, 68
$cfg[TitleDatabase], 72 Engine, 158
$cfg[TitleDefault], 73 environment variable
$cfg[TitleServer], 72 PMA_ABSOLUTE_URI, 10, 12
$cfg[TitleTable], 72 PMA_ARBITRARY, 9
$cfg[TranslationWarningThreshold], 29 PMA_HOST, 9
$cfg[TrustedProxies], 44, 65 PMA_HOSTS, 9
$cfg[UploadDir], 69, 94, 103, 126 PMA_PASSWORD, 10
$cfg[UseDbSearch], 50 PMA_PORT, 10
$cfg[UserprefsDeveloperTab], 72 PMA_USER, 10
$cfg[UserprefsDisallow], 29, 72 PMA_VERBOSE, 9, 10
$cfg[VersionCheck], 47 PMA_VERBOSES, 10
$cfg[ZeroConf], 16, 54 ExecTimeLimit, 49
$cfg[ZipDump], 60 Export, 61
$cfg[blowfish_secret], 51 Export, charset, 61
Configuration storage, 16 Export, file_template_database, 61
Confirm, 50 Export, file_template_server, 61
connect_type, 33 Export, file_template_table, 61
ConsoleEnterExecutes, 29 Export, format, 61
control_*, 34 Export, method, 61
controlhost, 33 export_templates, 42
controlpass, 33 extension, 36, 158
controlport, 33
172 Index
F L
FAQ, 158 Lang, 64
favorite, 39 LATEX, 160
Field, 158 LimitChars, 66
FilterLanguages, 64 LinkLengthLimit, 65
FirstLevelNavigationItems, 53 LoginCookieDeleteAll, 51
ForceSSL, 49 LoginCookieRecall, 51
foreign key, 158 LoginCookieStore, 51
ForeignKeyDropdownOrder, 60 LoginCookieValidity, 51
ForeignKeyMaxLimit, 60 LoginCookieValidityDisableWarning, 28
FPDF, 158 LogoutURL, 47
LongtextDoubleTextarea, 68
G
GD, 158 M
GD2, 159 Mac, 160
GD2Available, 65 Mac OS X, 160
GridEditing, 59 MaxCharactersInDisplayedSQL, 48
gzip, 159 MaxDbList, 48
GZipDump, 60 MaxExactCount, 71
MaxExactCountViews, 72
H MaxNavigationItems, 53
hide_db, 35 MaxRows, 58
HideStructureActions, 58 MaxSizeForInputField, 68
history, 39 MaxTableList, 48
host, 30, 159 MaxTableUiprefs, 43
hostname, 159 mbstring, 160
HTTP, 159 MCrypt, 160
Authentication mode, 18 mcrypt, 160
https, 159 MemoryLimit, 49
MIME, 160
I MinSizeForInputField, 68
IconvExtraParams, 64 mod_proxy_fcgi, 161
IEC, 159 module, 161
IgnoreMultiSubmitErrors, 50 MySQL, 161
IIS, 159 mysql, 161
Import, 62 mysqli, 161
Import, charset, 62 MysqlMinVersion, 57
Index, 159
InitialSlidersState, 72 N
InsertRows, 60 name (global variable or constant), 97
IP, 159 NaturalOrder, 72
IP Address, 159 NavigationDisplayLogo, 54
IPv6, 159 NavigationDisplayServers, 55
ISAPI, 160 navigationhiding, 41
ISO, 160 NavigationLinkWithMainPanel, 54
ISP, 160 NavigationLogoLink, 54
NavigationLogoLinkWindow, 54
J NavigationTreeDbSeparator, 53
JPEG, 160 NavigationTreeDefaultTabTable, 55
JPG, 160 NavigationTreeDefaultTabTable2, 55
NavigationTreeDisplayDbFilterMinimum, 54
K NavigationTreeDisplayItemFilterMinimum, 54
Key, 160 NavigationTreeEnableExpansion, 55
Index 173
NavigationTreeEnableGrouping, 53 relation, 36
NavigationTreePointerEnable, 66 RelationalDisplay, 59
NavigationTreeShowEvents, 56 RememberSorting, 67
NavigationTreeShowFunctions, 56 RepeatCells, 71
NavigationTreeShowProcedures, 56 ReservedWordDisableWarning, 28
NavigationTreeShowTables, 56 RetainQueryBox, 50
NavigationTreeShowViews, 56 RFC, 162
NavigationTreeTableLevel, 53 RFC 1867, 113
NavigationTreeTableSeparator, 53 RFC 1952, 162
nopassword, 35 RFC 2616, 107
NumFavoriteTables, 54 RFC 1952, 162
NumRecentTables, 53 Row (record, tuple), 162
RowActionLinks, 67
O RowActionLinksWithoutUnique, 67
OBGzip, 64 RowActionType, 58
only_db, 35
OpenDocument, 161 S
Order, 59 SaveCellsAtOnce, 59
OS X, 161 SaveDir, 70
savedsearches, 41
P SendErrorReports, 29
password, 35 Server, 162
PCRE, 161 server configuration
PDF, 161 AllowDeny, order, 44
pdf_pages, 38 AllowDeny, rules, 44
PDFDefaultPageSize, 63 AllowNoPassword, 44
PDFPageSizes, 63 AllowRoot, 44
PEAR, 161 auth_http_realm, 34
PersistentConnections, 48 auth_type, 34
PHP, 161 bookmarktable, 36
phpMyAdmin configuration storage, 16 central_columns, 41
PMA_ABSOLUTE_URI, 12 column_info, 38
PMA_HOST, 9 compress, 33
PMA_PASSWORD, 10 connect_type, 33
PMA_USER, 10 control_*, 34
PMA_VERBOSE, 10 controlhost, 33
PmaAbsoluteUri, 27 controlpass, 33
pmadb, 16, 36 controlport, 33
PmaNoRelation_DisableWarning, 28 controluser, 33
port, 30, 161 designer_settings, 41
primary key, 162 DisableIS, 45
PropertiesNumColumns, 62 export_templates, 42
ProtectBinary, 59 extension, 36
ProxyPass, 48 favorite, 39
ProxyUrl, 47 hide_db, 35
ProxyUser, 48 history, 39
host, 30
Q LogoutURL, 47
QueryHistoryDB, 71 MaxTableUiprefs, 43
QueryHistoryMax, 71 navigationhiding, 41
nopassword, 35
R only_db, 35
recent, 39 password, 35
RecodingEngine, 64 pdf_pages, 38
174 Index
pmadb, 36 ShowStats, 56
port, 30 Signon
recent, 39 Authentication mode, 19
relation, 36 SignonCookieParams, 46
savedsearches, 41 SignonScript, 45
SessionTimeZone, 43 SignonSession, 46
SignonCookieParams, 46 SignonURL, 47
SignonScript, 45 SkipLockedTables, 49
SignonSession, 46 socket, 30, 162
SignonURL, 47 SQL, 163
socket, 30 SQLQuery, Edit, 69
ssl, 31 SQLQuery, Explain, 69
ssl_ca, 31 SQLQuery, Refresh, 69
ssl_ca_path, 32 SQLQuery, ShowAsPHP, 69
ssl_cert, 31 SSL, 162
ssl_ciphers, 32 ssl, 31
ssl_key, 31 ssl_ca, 31
ssl_verify, 32 ssl_ca_path, 32
table_coords, 37 ssl_cert, 31
table_info, 37 ssl_ciphers, 32
table_uiprefs, 40 ssl_key, 31
tracking, 42 ssl_verify, 32
tracking_add_drop_database, 43 Storage Engines, 162
tracking_add_drop_table, 43 Stored procedure, 162
tracking_add_drop_view, 43 SuhosinDisableWarning, 28
tracking_default_statements, 42
tracking_version_auto_create, 42 T
user, 35 table, 163
userconfig, 43 table_coords, 37
usergroups, 40 table_info, 37
users, 40 table_uiprefs, 40
verbose, 36 TableNavigationLinksMode, 58
ServerDefault, 47 TablePrimaryKeyOrder, 67
ServerLibraryDifference_DisableWarning, 28 TabsMode, 62
Servers, 29 tar, 163
SessionSavePath, 49 TCP, 163
SessionTimeZone, 43 TCPDF, 163
Setup script, 14 TempDir, 70
ShowAll, 58 TextareaAutoSelect, 68
ShowBrowseComments, 67 TextareaCols, 68
ShowChgPassword, 57 TextareaRows, 68
ShowCreateDb, 57 ThemeDefault, 73
ShowDatabasesNavigationAsTree, 53 ThemeManager, 73
ShowDbStructureCreation, 57 ThemePerServer, 73
ShowDbStructureLastCheck, 58 TitleDatabase, 72
ShowDbStructureLastUpdate, 57 TitleDefault, 73
ShowFieldTypesInDataEditView, 60 TitleServer, 72
ShowFunctionFields, 59 TitleTable, 72
ShowGitRevision, 57 tracking, 42
ShowHint, 48 tracking_add_drop_database, 43
ShowPhpInfo, 56 tracking_add_drop_table, 43
ShowPropertyComments, 67 tracking_add_drop_view, 43
ShowServerInfo, 56 tracking_default_statements, 42
ShowSQL, 49 tracking_version_auto_create, 42
Index 175
TranslationWarningThreshold, 29
trigger, 163
TrustedProxies, 65
type (global variable or constant), 96
U
UFPDF, 163
unique key, 163
UploadDir, 69
URL, 163
UseDbSearch, 50
user, 35
userconfig, 43
usergroups, 40
UserprefsDeveloperTab, 72
UserprefsDisallow, 72
users, 40
V
verbose, 36
version (global variable or constant), 96
VersionCheck, 47
W
Webserver, 163
X
XML, 163
Z
ZeroConf, 54
ZIP, 164
ZipDump, 60
zlib, 164
176 Index

PHP My Admin

Uploaded by

Copyright:

Available Formats

PHP My Admin

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PHP My Admin

Uploaded by

Copyright:

Available Formats

phpMyAdmin Documentation

The phpMyAdmin devel team

Mar 16, 2017

6 FAQ - Frequently Asked Questions 101

7 Developers Information 133

8 Distributing and packaging phpMyAdmin 135

12 Indices and tables 165

Currently phpMyAdmin can:

Proper support may also need changes in php.ini.

create PDF graphics of your database layout

Currently phpMyAdmin supports following shortcuts:

A word about users

phpMyAdmin supports MySQL-compatible databases.

Red Hat Enterprise Linux

Installing from Git

You can clone current phpMyAdmin source from https://github.com/phpmyadmin/phpmyadmin.git:

git clone https://github.com/phpmyadmin/phpmyadmin.git

Additionally you need to install dependencies using Composer tool:

composer update --no-dev

Installing using Composer

composer create-project phpmyadmin/phpmyadmin --repository-url=https://www.phpmyadmin.

Installing using Docker

docker pull phpmyadmin/phpmyadmin

Docker environment variables

You can configure several phpMyAdmin features using environment variables:

Note: Used only if PMA_HOST is empty.

3.4. Installing using Composer 9

Note: Used only if PMA_VERBOSE is empty.

Additionally configuration can be tweaked by /etc/phpmyadmin/config.user.inc.php. If this file

You can use following volumes to customise image behavior:

To connect phpMyAdmin to given server use:

docker run --name myadmin -d -e PMA_HOST=dbhost -p 8080:80 phpmyadmin/phpmyadmin

To connect phpMyAdmin to more servers use:

docker run --name myadmin -d -e PMA_HOSTS=dbhost1,dbhost2,dbhost3 -p 8080:80

To use arbitrary server option:

docker run --name myadmin -d --link mysql_db_server:db -p 8080:80 -e PMA_ARBITRARY=1

You can also link the database container using Docker:

docker run --name phpmyadmin -d --link mysql_db_server:db -p 8080:80 phpmyadmin/

Running with additional configuration:

docker run --name phpmyadmin -d --link mysql_db_server:db -p 8080:80 -v /some/local/

Customizing configuration file using docker-compose

3.5. Installing using Docker 11

Running behind haproxy in a subdirectory

### NETWORK restriction

reqirep ^(GET|POST|HEAD)\ /phpmyadmin/(.*) \1\ /\2

You then should specify PMA_ABSOLUTE_URI in the docker-compose configuration:

Manually creating the file

3.6. Quick Install 13

$cfg['Servers'][$i]['password'] = 'cbb74bc'; // use here your password

Using Setup script

Setup script on Debian, Ubuntu and derivatives

To block editing configuration invoke:

Setup script on openSUSE

Verifying phpMyAdmin releases

and you can get more identification information from <https://keybase.io/lem9>.

and you can get more identification information from <https://keybase.io/ibennetch>.

and you can get more identification information from <https://keybase.io/nijel>.

gpg: requesting key 8259BD92 from hkp server pgp.mit.edu

3.7. Verifying phpMyAdmin releases 15