WAN Device Modules (Instructor Version)

Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only.

Objective
Select WAN access technologies to satisfy business requirements in a small-to-medium-sized business network.
Instructor Note: This activity can be completed individually or in small groups it can then be shared and
discussed with another group of students, with the entire class, or with the instructor.

Scenario
Your medium-sized company is upgrading its network. To make the most of the equipment currently in use, you
decide to purchase WAN modules instead of new equipment.
All branch offices use either Cisco 1900 or 2911 series ISRs. You will be updating these routers in several
locations. Each branch has its own ISP requirements to consider.
To update the devices, focus on the following WAN modules access types:
Ethernet
Broadband
T1/E1 and ISDN PRI
BRI
Serial
T1 and E1 Trunk Voice and WAN
Wireless LANs and WANs

Resources
World Wide Web
Word processing software

Directions

Step 1: Visit Interfaces and Modules. On this page, you will see many options ISR interface
modules options remember that you currently own and use only the Cisco 1900 and
2900 series routers.
Note: If the above link is no longer valid, search the Cisco site for Interfaces and Modules.

Step 2: Create a comparison matrix listing the following WAN access types for your branch
networks:
Ethernet

Broadband

T1/E1 and ISDN PRI

BRI

2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 5
WAN Device Modules

Serial WAN

T1 and E1Trunk Voice and WAN

Wireless LANs and WANs

Step 3: In the matrix, record the interface module type you need to purchase for your ISRs for
upgrade purposes.

Step 4: Use the Internet to research pictures of the modules. Provide a screenshot of the
module or a hyperlink to a picture of each module.

Step 5: Share your matrix with a classmate, group, class, or your instructor.

Suggested Activity Example Solution:

Instructor Notes:
This is a good place to have students discuss the terminology. For instance, WIC2T = WAN Interface Card
with 2 serial ports.

Students can also add various cards to routers in PT and use commands such as show ip interface brief to
view the changes.
Please encourage students to read the datasheet information listed on the modular card graphics sites they
will become familiar with different interface types by doing so.

All graphics will vary as shown in the students final matrix the graphics shown in this Activity Example
Solution are representative in nature and were copied from the Cisco products sites. Each graphic is
hyperlinked to the source available at the time this activity was created.

2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 5
WAN Device Modules

WAN Module (interface card) Example

2900 and 1900 Series Module
Access
Availability (* from Column 2 indicates the graphic shown)
Type

EHWIC 1-port dual mode

SFP(100M/1G) or
Ethernet GE(10M/100M/1G)*
2-port 10/100 Routed-Port
HWIC

Multimode
VDSL2/ADSL/2/2+ EHWIC
Annex (A, B, and M
variations)*
Multimode EFM/ATM
Broadband SHDSL EHWIC
4-pair G.SHDSL HWIC with
2-wire, 4-wire, and 8-wire
support or 2-pair G.SHDSL
HWIC with 2-wire and 4-wire
support

(for use with 2900 series only)

2-port Channelized
T1/E1 and
E1/T1/ISDN PRI HWIC*
ISDN PRI
1-port Channelized
E1/T1/ISDN PRI HWIC

(for use with 2900 series only)

2-port VIC card-BRI (NT and
TE
(for use with 2900 and 1900
series)
BRI 4-port ISDN BRI High-Speed
WAN Interface Card*
1-port ISDN BRI U High-
Speed WAN Interface Card
1-port ISDN WAN Interface
Card (dial and leased line)

2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 5
WAN Device Modules

(for use with 2900 series only)

One-port clear-channel
T3/E3 Service Module
4-port clear-channel T1/E1
HWIC
4-port serial HWI
(for use with 2900 and 1900
series)
Serial 1-Port 4-Wire 56/64 Kpbs
CSU/DSU WAN Interface
Card
1-Port T1/Fractional T1
DSU/CSU High-Speed WAN
Interface Card*
1-Port Serial High-Speed
WAN Interface Card
2-Port Serial High-Speed
WAN Interface Card
1

1-port T1/E1 Voice / WAN w/

D&I & unstructured E1
(G703)1
2-port T1/E1 Voice / WAN w/
Drop & Insert
T1/E1
1-port T1/E1 Voice / WAN w/
Trunk 2
Drop & Insert2
Voice and
WAN 2-port T1/E1 Voice / WAN w/
D&I & unstructured E1
(G703)
1-port T1/E1 Voice / WAN w/
D&I & unstructured E1
(G703)

Wireless Dedicated 4G LTE EHWIC

LANs and for Verizon Wireless
WAN Network, US (Verizon SKU)
operates on LTE at 700MHz
(band 13) with GPS
4G LTE EHWIC for AT&T,
700 MHz Band 17,
850/1900/2100 MHz
UMTS/HSPA
4G LTE EHWIC for Europe,
LTE 800/900/1800/
2100/2600 MHz,
900/1900/2100 MHz
UMTS/HSPA bands
(non-US) 3.7G HSPA+

2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 4 of 5
WAN Device Modules

Release 7 EHWIC w/
SMS/GPS (MC8705)
ATT HSPA+ R7 EHWIC with
SMS/GPS based on
MC8705
3.5G EHWIC (Non-US)
HSPA/UMTS
850/900/1900/2100MHz with
SMS/GPS
3G EHWIC Verizon EV-DO
Rev A/0/1xRTT
800/1900MHz with
SMS/GPS
3G EHWIC Sprint EV-DO
Rev A/0/1xRTT
800/1900MHz with
SMS/GPS
3G EHWIC BSNL EV-DO
Rev A/0/1xRTT
800/1900MHz with
SMS/GPS
3G (for India only) HWIC
TATA EVDO Rev A/0/1xRTT
800/1900MH

Identify elements of the model that map to IT-related content:

WAN modular interfaces

Network card interface types
ISR module availability by model type

2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 5 of 5