International Journal of Engineering and Technical Research (IJETR)

ISSN: 2321-0869, Volume-3, Issue-4, April 2015

Environment Monitoring and Device Control using

ARM based Embedded Controlled Sensor Network
Suneha D. Pawar, Prof.U. A. Rane

Abstract Embedded controlled detector network is that the

technology need to implement environmental solutions.Many
researchers have been making attempts to develop the embedded
controlled sensor network. The present systems unit of activity
huge, very pricey and arduous to need care of. The planned
system is price effective and embedded systems within the
planned system. ARM primarily based microcontroller and
wireless sensors want to management the assorted devices and to
watch the knowledge concerning the atmosphere exploitation
zig bee.

Index Terms Embedded controlled sensor networks,

Environment monitoring system,zigbee

I. INTRODUCTION Fig a-Block diag of Monitoring system

Embedded controlled sensing element networks (ECSN)are
mainly designed to be application- specific so that the energy IV. Hardware Description
consumption is minimum as the battery-powered nodes
demand life-time of several months or even a few years. 1. PIN DIAGRAM of Zigbee
Zigbee is the name for a short-range,low-price, and 2.
low-data-rate wireless multi-hop networking technology.The
obtainable technologies area unit Bluetooth, Wi-Fi,
Wi-Max,wireless mobile Ad-hoc network (WMANET),
UMB, wireless HART, Bluetooth and ZigBee Embedded
sensing element networks square measure fashioned by
human action.
II. METHODOLOGY

Environment observation and device management allows new

level of comfort in homes and it can also manage the energy
consumption efficiently which in turns promotes the saving.
Remote controlling of the devices offers many advantages to
senior citizens and people with disabilities which helps them
in being more autonomous and increasing quality of life.
Researchers have worked on home automation and 1. Pin details of Zigbee
environmental monitoring system in the past but in the the
existing systems value is high, size is difficult which they unit
of measurement tough to stay up. The projected system is
price effective and controlled by user friendly embedded
systems.

III. BLOCK DIAGRAM

Fig a shows the complete block diagram of ARM based
Monitoring system.

Manuscript received April 21, 2015

Suneha D. Pawar, Digital Electronics,SSGMCE,Shegaon,Amravati
University,India,MobileNo.-9423125373.
Prof.U. A. Rane Digital Electronics,SSGMCE,Shegaon,Amravati
2. Image of Zigbee
University,India,MobileNo.9422926166

339 www.erpublication.org
 Environment Monitoring and Device Control using ARM based Embedded Controlled Sensor Network

V. SOFTWARE PART

KEIL uVISION 4
1 .Keil software is a compiler and debugger use to compile
C code for microcontroller.

2. It compile code, assemble assembly source files, link and

3. Circuit Diagram of End Zigbee locate object modules and libraries, create HEX files, and
debug your target program.

3. Keil is Project management, source code editing, and

program debugging in one single, environment.

START PROJECT WITH A KEIL

FLASH MAGIC
1. Flash magic is to download the hex file in the
LPC2148 controller.
2. We have to select IC and set some parameter like
4. LPC 2138 MODULE crystal value.

VI. FLOWCHART

5. Interfacing LCD with controller

VI. RESULT

When we start our Monitoring System it displays-

SENSORS USED

There are four different types of sensors used in our

Monitoring System.
a) Temperature sensor (LM35)
b) Humidity sensor (AM1001) Fig 1.project name display on LCD display
c) Light intensity sensor (LDR)
d) CO gas sensor (MQ7)
Following fig 2 shows -

340 www.erpublication.org
 International Journal of Engineering and Technical Research (IJETR)
ISSN: 2321-0869, Volume-3, Issue-4, April 2015
Area 1- Intensity:212 l REFERENCES
It means intensity is in the specific range therfore LED will [1] Burrell, T. Bro [2] A. Camilli, C. E. Cugnasca, A. M. Saraiva, A. R.
not glow. Hirakawa, and P. L. P. CorrAea. From wireless sensors to field mapping:
Anatomy of an application for precision agriculture. Comput. Electron.
Agric.,58( I ):25-36,2007.
[2] Guangming Song, Fei Ding, Weijuan Zhang and Aiguo Song, "A
Wireless Power Outlet System for Smart Homes," IEEE Transactions on
Consumer Electronics, Vol. 54, No.4, November,2008.
[3] Shen Jin, Song Jingling, Han Qiuyan, Wang Shengde, Yang Yan, "A
Remote Measurement and Control System for Greenhouse based on
GSM-SMS" IEEE 8th International Conference on Electronic
Measurement and Instrument, 2007.
[4] G. K. Banerjee, Rahul Singhal, Bhubaneswar, Orissa India
"Microcontroller Based Polyhouse Automation Controller",
International Symposium on Electronic System Design, pp.158- 162,
Dec20 10.
[5] Wen bin Huang, Guanglong Wang, Jianglei Lu, Fengqi Gao,1ianhui
Chen "Research of wireless sensor networks for an intelligent
measurement system based on ARM",Tnternational conference on
Mechatronics and Automation, pp. 1074 - 1079,20 II.
[6] Yuksekkaya, B.; Kayalar, A.A.; Tosun, M.B.; Ozcan, M.K.;Alkar,A
Fig 2 .Z.;"Research of Wireless Sensor Networks for an Intelligent
Measurement System Based on ARM", IEEE Transactions on
Area 1- CO gas:1789 ppm Mechatronics and Automation, Volume: 52, Issue: 3,2006 , pp. 837 -
It means CO is out of specific range therfore LED will 843.
glow.

Suneha D. Pawar is born in 1990.She received Bachelor of Engineering

degree in Electronics and tele comm Engineering from Yashwantrao Chavan
College of Engg,Nagpur,India in 2012. She is persuing her M. Tech. degree
in Digital Electronics from Shree Sant Gajanan Maharaj clg of
Engg,Shegaonbfrom Amravati University,India. She is doing her masters
project in Embedded Design System. Her current interests include
microcontroller applications, digital electronics sensor networks and
applications of embedded systems.

Fig-3
Glow LED is taken for CO gas.
This type of reading of Area 2 is also displayed on LCD
display.
Prof U.A.Rane received B.E. degree from VNIT, Nagpur in 1989 in
A. Those LED which remains OFF when the system is Electronics and tele comm Engineering and ME degree from
operating then the LEDs are in Specified range. S.S.G.M.C.E,Shegaon in 1999 in Electronics Engineering.Currently, he is
an associate Professor in S.S.G.M.C.E,Shegaon,India. He is an Associate
Professor at the Embedded System,Shegaon, India.His current interests
B. When sensors shows out of range values,we can include Embedded system Design, microcontroller and
connect relay to those sensors and cotrol it. applications,computer applications.

C. In this way,our Monitoring system works.

VII. CONCLUSION
This paper demonstrates planning of embedded controlled
sensor networks used for dominant the house devices further
as watching the environmental parameters. The options of
Zigbee is explored to style the system for long distance as well
as short distance .Embedded controlled sensor networks have
tested themselves to be a reliable resolution in providing
remote and sensing for indoor environmental monitoring
systems. Four commercial sensors had been integrated with
the system to monitor and compute the level of existence of
temperature,humidity,light intensity and CO gas in
atmosphere usmg information and communication
technologies.

341 www.erpublication.org