Identification of The Material and Supplier: Page 1 of 6 SDS Date: 22 Mar 2016 Version No: 2
Identification of The Material and Supplier: Page 1 of 6 SDS Date: 22 Mar 2016 Version No: 2
Identification of The Material and Supplier: Page 1 of 6 SDS Date: 22 Mar 2016 Version No: 2
2. HAZARDS IDENTIFICATION
2.1 Classification of the substance or mixture
NOT CLASSIFIED AS HAZARDOUS ACCORDING TO AUSTRALIAN WHS REGULATIONS
2.2 Label elements
No signal word, pictograms, hazard or precautionary statements have been allocated.
4.2 Most important symptoms and effects, both acute and delayed
May cause irritation to the eyes and skin.
Biological limits
No biological limit values have been entered for this product.
PPE
Eye / Face Wear splash-proof goggles.
Hands Wear PVC or rubber gloves.
Body Wear a PVC apron. When using large quantities or where heavy contamination is likely, wear coveralls.
Respiratory Not required under normal conditions of use.
Report status This document has been compiled by RMT on behalf of the manufacturer, importer or supplier of the
product and serves as their Safety Data Sheet ('SDS').
It is based on information concerning the product which has been provided to RMT by the
manufacturer, importer or supplier or obtained from third party sources and is believed to represent
the current state of knowledge as to the appropriate safety and handling precautions for the product
at the time of issue. Further clarification regarding any aspect of the product should be obtained
directly from the manufacturer, importer or supplier.
While RMT has taken all due care to include accurate and up-to-date information in this SDS, it does
not provide any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts
no liability for any loss, injury or damage (including consequential loss) which may be suffered or
incurred by any person as a consequence of their reliance on the information contained in this SDS.
[ End of SDS ]