OptiX OSN 6800 Hardware Description ISSUE

OptiX OSN 6800
Hardware Description
www.huawei.com
Copyright 2007 Huawei Technologies Co., Ltd. All rights reserved.

Forward
z OptiX OSN 6800 is future-oriented according to the

development trend of metropolitan area network (MAN)
with IP as the core.
z OptiX OSN 6800 achieves dynamic optical layer

grooming and flexible electrical layer grooming with
brand-new architecture.
Copyright 2007 Huawei Technologies Co., Ltd. All rights reserved. Page1
Learning Guide
z Before learn this course, you should have:

Known WDM Basic Principle
Studied OTN Basic Knowledge
References
z OptiX OSN 6800 Product Description
z OptiX OSN 6800 Hardware Description
Objectives
z Upon completion of this course, you will be able to:
Describe the position and networking ability of OptiX OSN

6800
List the main functions and features of OptiX OSN 6800
Outline the layout of OptiX OSN 6800 subrack
Generalize the categories of boards
List the main functions and features of the boards
Contents
1. Network Application
2. Functions and Features
3. Cabinet, Subrack and Frame
4. Boards
Contents
1.1 System Architecture
1.2 Position in Networks
1.3 Networking and Applications
System Architecture
z Optical and Electrical Grooming Architecture
Optical Grooming Control plane based on GMPLS
FOADM
Optical layer : L0 FOADM/ROADM
ROADM
Electrical Grooming Line-side processing
Colored interface
L1 electrical layer O
Electrical layer : L1
T Electrical layer grooming
U
L2 electrical layer
Electrical layer : L2 Packet
Client service processing
GMPLS: Generalized multiprotocal label switching
Network Position
z OptiX OSN 6800 is mainly used in:
Area Backbone
Local networks
Metro core layer
Metro convergence layer
Networking and Applications
z OptiX OSN 6800 supports Point to Point, Chain, Ring and
Mesh network.
Point to Point
OTM OTM
Chain
OTM OADM OTM
Ring
Because of its excellent survivability, ring network is a dominant
networking mode in MAN DWDM network planning.
OADM
OADM OADM
OADM
Ring with chain
OADM
OTM
OADM OADM
OADM
Tangent rings
OADM OADM
OADM OADM OADM OADM
OADM OADM
Intersecting rings
OADM OADM OADM
OADM OADM OADM
Mesh Network
No node bottleneck, flexible and good expandability
Ready for ASON
OADM OADM
OADM OADM OADM
OADM OADM
Contents
3. Cabinet, Subrack and Frames
4. Boards
Contents
2.1 Optical Layer Technology
2.2 Electrical Layer Technology
2.3 Service Access
2.4 Guaranteed Reliability
2.5 Service Processing and Transmission
Optical Layer Technology
z Wavelength Grooming Ability
Distribution solutions of medium wavelength resource of WDM
equipment include FOADM and ROADM
Realizes intra-ring two-dimensional grooming and inter-ring

multi-dimensional grooming
z Supports DWDM and CWDM

DWDM:40 (2.5G / 10G / 40G
CWDM:18 2.5G
z Integrated System and Open System Compatibility
Electrical Layer Technology
z Electrical Layer Grooming Capacity

Centralized cross-connection of GE services, ODU1 signals via
the XCS board.
Distributed cross-connection of GE services, ODU1 signals and

Any services via the dual boards.
z L2 electrical layer switching based on VLAN and Stack

VLAN.
Service Access
z OptiX OSN 6800 can access multi-services:

SDH/ SONET
POS
ATM
Ethernet
SAN
OTN
Video and others
Guaranteed Reliability
z Equipment Level Protection

Input power supply 1+1 backup
Cross-connect board 1+1 protection
SCC protection
1+1 protection
External memory for NE configuration data backup
Secondary power protection for OTU
Guaranteed Reliability
z Network Level Protection
Optical line protection
Optical channel protection
Subnetwork connect protection (SNCP)
Service Processing and Transmission
z OTN Processing
z OSC and ESC
z FEC Function
z Tunable Wavelengths
Adopts 10Gbit/s, 5Gbit/s and 2.5Gbit/s OTUs
z ALS, IPA, ALC and APE functions
z Main/Slave Subrack Unified Management

Maximum of seven slave subrack under one main subrack
Contents
4. Boards
Contents

3.1 Cabinet
3.2 Subrack
3.3 Frame
Cabinet
z OptiX OSN 6800 can be installed in:

ETSI 300mm rear column cabinet
Standard ETSI 300 mm cabinet
23-inch open rack

Item 2.2m 2.6m
Quantity of configurable subracks in a ETSI 300mm 4 4

rear column cabinet
Quantity of configurable subracks in a Standard ETSI 3 4

300mm cabinet
Quantity of configurable subracks in a 23-inch open rack (7 feet high): 4
Cabinet
z DC Power Distribution Box

Maximum Power Consumption (full configured) :3400W
Input interface area is divided into part A and part B
Part A is working, part B is protection.
Part A and part B access two 48V DC power each.
Part A and part B provide six power output interfaces each.
Two ways to connect the input terminals based on the working

current.
Cabinet
1 Output cable terminal 3 Input cable terminal

2 Grounding screw 4 Power switch
Cabinet

Six power switches match for the corresponding output in each
part:
Part A: the input RTN1(+) and RTN1(-) are in one group. They
supply power to output 1, 2, and 3. The corresponding power
switches are respectively SW1, SW2, and SW3.
Part A: the input RTN2(+) and RTN2(-) are in one group. They
supply power to output 4, 5, and 6. The corresponding power
switches are respectively SW4, SW5, and SW6.
Part B is the same.
Subrack
z Subrack Front Layout:
Indicators, Board area, Fiber cabling area, Fan Tray Assembly,
Air Filter and Interface area.
Item Specification
Dimensions (mm) 400 (H) 487 (W) 295 (D)
Max power consumption

850W
(full configuration)
Rated working current 30A
Working voltage range -48V/-60V DC (20)
Subrack
Interface Area
I I I I I I I I I I I I I I I I I S P
zI
U U U U U U U U U U U U U U U U U C I
# # # # # # # # / /U # # # # # # / U
C Power Interface unit
X X
7 1 1 1 1 1 1 S
1 2 3 4 5 6 7 8 # P
C C 1 2 3 4 5 6 C
9U 1 I
S S C
8 U
# # #
1 A
9 1
0 7 U Inter-subrack
X communication and
Fiber Cabling system auxiliary slot
Fan Tray Assembly
Air Filter
System control and

communication
Slot 1-17 can be used
for XCS 1+1 backup SCC standby slots
OTU/OADM/OA/OSC optional
Subrack
z Dual Slots
OptiX OSN 6800 provides centralized cross-connection.
ODU1 signal and GE service
OptiX OSN 6800 provides distributed cross-connection through

dual slots.
ODU1 signal, GE service and Any service (100Mbit/s2.5Gbit/s)
Dual slots:
1 IU1&IU2 4 IU7&IU8
2 IU3&IU4 5 IU11&IU12
3 IU5&IU6 6 IU13&IU14
7 IU15&IU16
Subrack
z Interfaces in the interface area
COM ETH3 ALMO1ALMO2ALMO3ALMO4 SERIAL ALMI1 ALMI2 LAMP1LAMP2
COM: Commissioning interface
ETH3: Inter-subrack communication interface
ALMO1ALMO4: Alarm output and cascading interface
SERIAL: OAM interface
ALMI1, ALMI2: Alarm input interface
LAMP1, LAMP2: Subrack alarm output and cascading interface
Frame
z Fiber Spooling Frame
Coil up the redundant fiber jumpers
Fiber-spooling
1 Grommet 4
post
2 Tray 5 Fiber outlet
3 Front panel of tray 6 Frame body
Contents
4. Boards
Contents
4. Boards
4.1 Overview of Boards
4.2 Optical Transponder Unit
4.3 Tributary Unit and Line Unit
4.4 Cross-connect Unit
4.5 Optical Multiplexer and Demultiplexer Unit
4.6 Optical Add and Drop Multiplexing Unit
4.7 Optical Amplifying Unit
4.8 System Control and Communication Unit
4.9 Optical Supervisory Channel Unit
4.10 Other Units
Overview of Boards
z Four laser safety levels
Laser Level Label Reference Power Range
Class 1 <10.00 dBm (<10.00 mW)
Class 1M 10.00 dBm ~ 22.15 dBm (10.00 mW ~ 164 mW)
Class 3B 22.15 dBm ~ 27.00 dBm (164.00 mW ~ 500.00 mW)
Class 4 >27.00 dBm (>500.00 mW)
Overview of Boards
z Bar Code for Boards
On the front panel of each board
Includes the BOM code, delivery information, board version,

board name, board characteristic code and etc.
Overview of Boards
z Bar Code for Boards
Characteristic code for a DWDM OTU e.g.L4G
DWDM side receiving optical

Type
module
A APD-Avalanche Photo Diode
P PIN-Positive Intrinsic Negative
19210 P A
DWDM side transmitting

DWDM-side central
optical module
frequency:192.10THz
Overview of Boards
z Board Category
Board category
Optical transponder unit Optical amplifying unit
Tributary unit and Line unit System control and communication
Cross-connect unit unit

Optical supervisory channel unit
Optical multiplexer and demultiplexer unit Optical protection unit
FOADM unit Spectrum analyzer unit
ROADM unit Variable optical attenuator unit
Optical Transponder Unit
z Board list
Board Occupied
Board description Valid slots
name slots
Line wavelength conversion unit with 4xGE
L4G 1 IU1~IU8 and IU11~IU16
line capacity
LDGS / 2 x GE unit, single / dual fed and single
1 IU1~IU8 and IU11~IU16
LDGD /selective receiving
4-channel multi-rate (100Mbit/s-2.5Gbit/s)
LQMS /
wavelength conversion unit, single/dual fed 1 IU1~IU8 and IU11~IU16
LQMD
and single/selective receiving
z Board list
Board Occupied
name slots
LSX 10 Gbit/s wavelength conversion unit 1 IU1IU17
LSXR 10 Gbit/s wavelength conversion relay unit 1 IU1IU17
LWXS / Arbitrary rate (16Mbit/s-2.5Gbit/s) wavelength

1 IU1IU17
LWXD conversion board (single / double transmit)
Arbitrary rate (16Mbit/s-2.5Gbit/s) dual-

LWX2 1 IU1IU17
wavelength conversion board
z Front Panel
See the right picture, (e.g. LDGD) TX/RX
Client Side
z Indicators
All OTUs provide four indicators
IN/OUT
Indicator Name Color
WDM
Side
STAT Board hardware status Red, green
indicator
ACT Service active status indicator Green
PROG Board software status Red, green

indicator
SRV Service alarm indicator Red, green, yellow
z LDGD
2xGE unit, concurrent sending and selective receiving
realizes the conversion between two GE signals and

standard WDM signals
Type of the optical interface: LC
Laser Safety Level: Class 1
z LDGD
Functional modules and signal flow
z LDGD
Functions and Features
Client-side service: GE
Cross-connect capabilities:
Supports the transmission of 4 GE signals to the XCS and 2 GE
signals to the dual slots through the the backplane.
Provides the OTN interface on WDM-side
Supports the DWDM and the CWDM specifications
Supports the tunable wavelength optical module
z LDGD
ESC function
Adopts FEC encoding compliant with the ITU-T G.975
Protection scheme
SW SNCP
Client-side 1+1 protection
Intra-OTU 11 protection
Automatic Laser Shutdown (ALS) function
z L4G
Line wavelength conversion unit with 4xGE line capacity
Converges up to 6 GE service signals into 4 GE service

signals and multiplexes these 4 signals into an OTU
5G/FEC 5G signal.
z L4G
z L4G
Supports the transmission of 8 GE signals to the XCS and 4 GE
signals to the dual slots through the the backplane.
Supports DWDM specification
z L4G
ESC function
Protection scheme
SW SNCP
VLAN SNCP
Client-side 11 protection
ALS function
z LQMS
4-channel multi-rate (100 Mbit/s-2.5 Gbit/s) wavelength
conversion unit, single fed and single receiving
Multiplexes 4 signals at the rate between 100 Mbit/s

and 2.5 Gbit/s into a 2.5 Gbit/s signal.
z LQMS
z LQMS
Client-side service:
STM-16, STM-4, STM-1, OC-48, OC-12, OC-3, FC200, FC100, GE,
FE, ESCON, DVB-ASI, FICON, FICON Express
Only Tx1/Rx1optical interface supports 2.5Gbit/s service.

Four Any signals at the rate between 100 Mbit/s and 2.5 Gbit/s to the
dual slots

z LQMS
ESC function
Protection scheme:
SW SNCP
ALS function
z LSX
10 Gbit/s wavelength conversion unit
Maps one channel of 10Gbit/s service signals into

OTU2 or OTU2v signals and realizes the conversion
between the 10Gbit/s service signal and standard
DWDM signal.
z LSX
z LSX
OC-192,STM-64,10GE LAN,10GE WAN,OTU2
Cross-connect capabilities: None
Provides the OTN interfaces on WDM-side and client side
z LSX
ESC function
FEC encoding:
Adopts AFEC encoding compliant with the ITU-T G.975.1
Protection scheme:
ALS function
z LWXD
Arbitrary rate (16Mbit/s~2.5Gbit/s) wavelength
conversion board (double transmit).
Realizes the conversion between the signal at the rate

between 16 Mbit/s and 2.5 Gbit/s and standard WDM
signal.
Concurrently sending and selective receiving at WDM-

side
z LWXD
z LWXD
STM-16, STM-4, STM-1, OC-48, OC-12, OC-3, FC200, FC100, GE, FE,
FDDI, ESCON, DVB-ASI/SDI, FICON, FICON Express, HDTV
Cross-connect capabilities: None

OTN function: None
z LWXD
ESC function
Protection scheme:
Intra-OTU 11 protection
ALS function
Tributary Unit and Line Unit
z Board list
Board Board Occupie

category name d slots
4 x multi-rate tributary service
TQM 1 IU1~IU8 and IU11~IU16
processing unit
Tributary 2 x GE tributary service

TDG 1 IU1~IU8 and IU11~IU16
unit processing unit
4 x STM-16/OC-48/OTU1
TQS tributary service processing 1 IU1~IU8 and IU11~IU16
unit
4 x ODU1 multiplexing OTU2
Line unit NS2 1 IU1~IU8 and IU11~IU16
optical interface unit
z Front Panel
See the picture on the right(e.g. TDG)
z Indicators
All tributary units and line units provide four indicators

indicator

indicator
z TDG
2 x GE tributary service processing unit
Realizes the conversion between two GE optical

signals and two GE electrical signals or one ODU1
electrical signal
z TDG
z TDG
Supports the cross-connection of an ODU1 signal and two GE signals
between the TDG and the XCS or the paired board through the
backplane.
Protection scheme
SW SNCP
ODUk SNCP
ALS function
z TQM
4 x multi-rate tributary service processing unit
Realizes the conversion between four optical signals at

the rate between 100 Mbit/s and 2.5 Gbit/s and four
client-side electrical signals or one ODU1 electrical
signal.
z TQM
z TQM
STM-16,STM-4,STM-1,OC-48,OC-12,OC-
3,FC200,FC100,GE,FE,ESCON,DVB-ASI,FICON,FICON Express
Supports the cross-connection of one ODU1 signal between the TQM
and XCS or the paired board.
Supports the cross-connection of four signals at the rate between 100

Mbit/s and 2.5 Gbit/s between the boards in dual slots
z TQM
Protection scheme:
SW SNCP
ODUk SNCP
ALS function
z TQS
4 x STM-16/OC-48/OTU1 tributary service processing
unit
Realizes the conversion between four STM-16/OC-

48/OTU1 optical signals and four ODU1 electrical signals
z TQS
z TQS
STM-16,OC-48,OTU1
Supports the cross-connection of four ODU1 signals between the TQS
and XCS or the paired board
Provides the OTN interface on Client-side
ESC function
z TQS
Protection scheme:
ODUk SNCP
ALS function
z NS2
4 x ODU1 multiplexing OTU2 optical interface unit
Maps four ODU1 signals sent from XCS or the paired

board into an OTU2 signal.
z NS2
z NS2
Client-side service: None
Supports the cross-connection of four ODU1 signals between the NS2
and XCS or the paired board.
z NS2
ESC function
FEC encoding:
Adopts AFEC encoding compliant with the ITU-T G.975.1
Protection scheme:
ODUk SNCP
ALS function
Cross-connect Unit
z Board list
Board category Board name Board description
Cross-connect unit XCS Cross-connect and clock unit
Cross-connect Unit
z XCS
Cross-connect and clock unit
Realizes the cross-connection of services
Occupies one slot, IU9 / IU10
Indicators

indicator

indicator
Cross-connect Unit
z XCS
Cross-connect function:
Supports the Centralized grooming of ODU1 signals or GE services.
Supports a maximum cross-connect and grooming capacity of 320
Gbit/s for ODU1 signals.
Supports a maximum cross-connect and grooming capacity of 160
Gbit/s for GE services.
Provides 1+1 hot backup

Switching mode
Manual switching and auto switching
Non-revertive switching only
Optical multiplexer and demultiplexer unit
z Board list
Board Board Occupied

category name slots
D40 40-channel demultiplexing unit 3 IU1~IU17
Optical
D40V 40-channel demultiplexing unit with 3 IU1~IU17
multiplexer
VOA
and M40 40-channel multiplexing unit 3 IU1~IU17
demultiplexer
M40V 40-channel multiplexing unit with VOA 3 IU1~IU17
unit
FIU Fiber interface unit 1 IU1~IU17
z Front Panel
See the picture on the right (e.g. D40)
z Indicators
All Optical multiplexer and demultiplexer unit
provide four indicators

indicator

indicator
z D40/D40V
40-channel demultiplexing unit without/with VOA
Demultiplexes main path signal to a maximum of 40

channels of service.
Adjusts the optical power of each signal after

demultiplexing (D40V).
z D40/D40V
Supports C-even band wavelength
Online optical performance monitoring at IN port.

The ratio of MON port and IN port :10/90 (9.5dB)
Attenuation range of D40V: 0dB15dB
z M40/M40V
40-channel multiplexing unit without/with VOA
Realizes the multiplexing of a maximum of 40
standard WDM signals into one fiber.
Adjusts the optical power of each signal before

multiplexing (M40V).
z M40/M40V
Support C-even band wavelength
Online optical performance monitoring at OUT port

The ratio of MON port and OUT port :10/90 (9.5dB)
Attenuation range of M40V: 0dB15dB
z FIU
Fiber interface unit
Realizes the multiplexing and demultiplexing of

signals transmitted by the main path and the
optical supervisory channel.
Laser Safety Level: Class 1M
Functions and features

The ratio of MON port to OUT port: 1/99 (20dB).
z FIU
OADM Unit
z Board list
Board Boar
Occupie Valid
categor d Board description
d slots slots
y name
MR2 2-channel optical add/drop multiplexing unit 1 IU1~IU17
MR4 4-channel optical add/drop multiplexing unit 1 IU1~IU17

Fixed
OADM MR8 8-channel optical add/drop multiplexing unit 2 IU1~IU17
Unit
CMR2 CWDM 2-channel optical add/drop multiplexing 1 IU1~IU17
unit
CMR4 CWDM 4-channel optical add/drop multiplexing 1 IU1~IU17
unit
OADM Unit
z Board list
Boar
Board Occupied
d Board description Valid slots
category slots
name
ROAM Reconfigurable optical adding board 3 IU1~IU17
WSM9 9-port wavelength selective 2 IU1~IU17

Reconfigurabl switching multiplexing board
e OADM Unit WSD9 9-port wavelength selective 2 IU1~IU17
switching demultiplexing board
RMU9 9-Port ROADM multiplexing board 1 IU1~IU17
OADM Unit
z Indicators
All Fixed OADM units provide one indicator.

indicator
All Reconfigurable OADM units provide four indicators.

indicator

indicator
OADM Unit
z MR2
2-channel optical add/drop multiplexing unit
Realizes the adding/dropping and multiplexing of two

signals
OADM Unit
z MR2
OADM Unit
z CMR2
CWDM 2-channel optical add/drop multiplexing unit
Realizes the adding/dropping and multiplexing of two signals
OADM Unit
z RMU9
ROADM multiplexing unit.
Adds eight single-channel signal or multi-channel

signals to the main path.
OADM Unit
z RMU9
OADM Unit
z RMU9
8 colorless adding interface, dynamic input.
The TOA interface can be connected to optical amplifying

unit to realize cascading. If cascading is not needed, the
optical signals should be directly sent to the ROA interface.
Online optical performance monitoring at TOA and EXPI

ports.
The ratio of MONO port to TOA port and MONI port to EXPI
port: 3/97 (15dB).
OADM Unit
z ROAM
Reconfigurable optical adding unit
Realizes the dynamic adding/dropping, pass-

through, and blocking of a maximum of 40
wavelengths with the demultiplexing board.
OADM Unit
z ROAM
OADM Unit
z ROAM
Used for dynamic grooming of wavelength.
Realizes the wavelength-level equilibrium and control of

optical power to flatten the spectrum for the working signals.
OADM Unit
z WSD9
9-port wavelength selective switching demultiplexing
board
Configured any wavelengths to any interfaces
OADM Unit
z WSD9
DM1 DM2 DM3 DM4 DM5 DM6 DM7 DM8
IN EXPO
WSS optical module
MONI MONO
Control and communication module
SCC
OADM Unit
z WSD9
Multi-dimension, fully dynamic allocation of wavelengths.
Adjust the optical power of each channel.
Online optical performance monitoring in IN and EXPO

ports.
The ratio of MONI port to IN port and MONO port to EXPO port:
3/97 (15dB).
OADM Unit
z WSM9
9-port wavelength selective switching multiplexing board
Configures any wavelengths to any interfaces
OADM Unit
z WSM9
OADM Unit
z WSM9
Multi-dimension, fully dynamic allocation of wavelengths.
Adjust the optical power of each channel.
Online optical performance monitoring in OUT and EXPI

ports.
The ratio of MONO port to OUT port and MONI port to EXPI
port: 3/97 (15dB).
Optical Amplifying Unit
z Board list
Valid
Board name Board description Occupied slots
slots
OAU1 Optical amplifying unit 2 IU1~IU17
OBU1 Optical booster unit 1 IU1~IU17
Case-shape Raman pump

CRPC -- --
amplifier unit for C-band
z OAU1
Optical Amplifier Unit
Indicators

indicator

indicator
z OAU1
z OAU1
Amplifies a maximum of 40 channels with the channel
spacing of 100 GHz at the same time.
Gain locking function
Transient control function
Continuously adjusts the gain from 20 dB to 31 dB

The ratio of MON port and OUT port :1/99 (20dB)
z OBU1
Optical Booster Amplifier Unit
Indicators

indicator

indicator
z OBU1
z OBU1
Amplifies a maximum of 40 channels with the channel
spacing of 100 GHz at the same time.
Gain locking function
Transient control function
The ratio of MON port and OUT port :1/99 (20dB)
Typical gain
OBU1C01: 20dB, for receive end
OBU1C02: 23dB, for transmit end
z CRPC
Case-shape Raman pump amplifier unit for C-band
External, case-shape amplifier
Types of the optical interface: LC,LSH/APC
z CRPC
Indicators
RUN Running status indicator green
ALRM Service alarm indicator red
z CRPC
SYS
LINE Pump source module
MON
Control and
communication module
SCC
z CRPC
Provides energy for the amplification of signals in the fiber.
Realizes the distributed online amplification of signals over long

distance with wide bandwidth and low noise.
Used at the receive end of the system, must be used with EDFA.
The LAN interface is connected to the ETH1/ETH2 of AUX for the

communications with SCC.
z CRPC
The logical slot of CRPC is slot 31 on T2000.
Supports long-hop and 40G OTU application.
Online optical performance monitoring at SYS port

The ratio of MON port and SYS port :1/99 (20dB)
System Control and Communication Unit
z Board list
Board category Board name Board description

System control
and SCC System control and communication Unit
communication AUX System auxiliary interface unit
unit
z SCC
System control and communication unit
Accomplishes the service grooming, configuration

management and alarm output of a subrack.
Occupies one slot, IU17 and IU18
z SCC
Indicators
STAT Board hardware status indicator Red, green
PROG Board software status indicator Red, green
PWRA System power supply indicator Red, green
PWRB System power supply indicator Red, green
PWRC Protection power supply Red, green

indicator
ALMC Alarm cut-off indicator Yellow
z SCC
Buttons
Button Function
RESET Used to reset the SCC
ALM CUT Used to cut off the audible alarm
LAMP TEST Used to test all the indicators in the subrack
z SCC
LED
LED indicator Function
Subrack_ID The LED on the front panel is used to indicate

whether the subrack is a primary or a secondary
one when subracks are cascaded.
"0 indicates that the subrack which the SCC

placed is a primary one.
"1 to "7" indicates that the subrack which the SCC

placed is a secondary one.
z SCC
Other boards
Power supply
Clock module
module
Overhead CPU and

Monitoring
processing control
module
module module
Communications
module
Other boards
z SCC
1+1 hot backup
Supports 7 slave subracks cascading
A secondary subrack cannot be upgraded to a primary subrack
1:N power supply backup for the system.
IU18 is default for SCC.
z AUX
System auxiliary interface unit
NM_ETH1 NM_ETH2
Provides the system with various auxiliary interfaces and
management interfaces.
ETH1
Three-bit jumper used to set the subrack ID
ETH2
Indicators
STAT
PROG
Indicator Name Color AUX
PROG Board software status indicator Red, green
z AUX
Interfaces
NM_ETH1 NM_ETH2
Interface Type Function
NM_ETH1 RJ-45 NM interface or NM cascading interface
ETH1
ETH2
NM_ETH2 RJ-45 NM interface or NM cascading interface
ETH1 RJ-45 Inter-subrack communications network STAT

PROG
ETH2 RJ-45 interfaces

Inter-subrack communications network AUX
interfaces
Optical Supervisory Channel Unit
z Board list
Valid
Board name Board description Occupied slots
slots
Unidirectional optical supervisory channel
SC1 1 IU1~IU17
unit
Bi-directional optical supervisory channel
SC2 1 IU1~IU17
unit
z SC2
Realizes the processing of two supervisory channels in
opposite directions
Indicators
indicator

indicator
z SC2
z SC2
No limitation on the distance between two optical line amplifiers
Independent of the SCC

When the SCC needs to be maintained , the SC2 can still ensure the
pass-through of ECC with the two optical interfaces or the paired
board and monitor other stations.
Operating Wavelength: 1510nm
Other Units
z Board list
Board Board Occupied Valid

Board description
category name slots slots
DCP 2-channel optical path Protection unit 1 IU1~IU1
Optical 7
OLP Optical line protection unit 1 IU1~IU1
protection unit
SCS Sync optical channel separator unit 1 7
IU1~IU1
MCA4 4-channel spectrum analyzer unit 2 7

IU1~IU1
Spectrum
analyzer unit MCA8 8-channel spectrum analyzer unit 2 7
IU1~IU1
VA1 1-channel variable optical attenuator unit 1 7

IU1~IU1
Variable optical
attenuator unit VA4 4-channel variable optical attenuator unit 1 7
IU1~IU1
7
Other Units
z OLP
Optical Line Protection Unit
Indicators

indicator

indicator
Other Units
z OLP
Other Units
z OLP
Protection Type:
optical line protection
intra-OTU 1+1 protection
client-side 1+1 protection
Protection scheme:
concurrent sending and selective receiving
single-end switching
Other Units
z OLP
Switching Type:
Locked switching
Forced switching Priority

Automatic switching
Manual switching
Clear switching
Other Units
z DCP
2-channel optical path protection unit
Protection Type:
intra-OTU 1+1 protection
Indicators
indicator

indicator
Other Units
z SCS
Sync optical channel separator unit
Indicators

Other Units
z SCS
Other Units
z SCS
Protection Type:
Protection scheme:
Concurrent sending and selective receiving
single-end switching by detecting SD and SF events of the channel
Protection switching time < 50ms
Other Units
z MCA4
4-channel spectrum analyzer unit
Indicators:

indicator

indicator
Other Units
z MCA4
Supports the following detection functions and reporting
Optical power of the channel
Central Wavelength
OSNR
Number of wavelengths in the main optical path
Used in APE function with other boards.
Supports C band
Other Units
z MCA4
Detect accuracy for optical power: 1.5dB
Detect accuracy for OSNR: 1.5dB
Detect accuracy for central wavelength: 0.1nm
Other Units
z VA1
1-channel variable optical attenuator unit
Indicators

indicator

indicator
Other Units
z VA1
Supports optical power adjustment and alarm monitoring
Supports the power-off protection
variable attenuation ranges: 1.5dB21.5dB
Resolution: 0.1dB
Question
z How many networking topologies does OptiX OSN 6800

support ?
z What are the main types of the boards in OptiX OSN 6800?
Question
z Does XCS work in any slots ?
z Which services are there for centralized cross-connection ?
z How many services are there for distributed cross-

connection?
Summary
z Position and networking ability of OptiX OSN 6800
z Main functions and features of OptiX OSN 6800
z OptiX OSN 6800 subrack layout
z OptiX OSN 6800 board category
z Main functions and features of the boards
Thank You
www.huawei.com
Appendix 1: Indicators
z Cabinet Indicators
Indicator Name Status Description
power Power indicator On (green) The cabinet is powered on.
Off The cabinet is not powered on.
critical Critical alarm indicator On (red) There is a critical alarm.
Off There is no critical alarm.
major Major alarm indicator On (Orange) There is a major alarm.
Off There is no major alarm.
minor Minor alarm indicator On (Yellow) There is a minor alarm.
Off There is no minor alarm.
z Board Indicators
STAT Board On The board works normally.

Hardwar (green)
e
On (red) The board hardware fails.
Indicator
Off The board is not powered on.
SRV Service On Service is normal, no service alarm occurs.
Alarm (green)
Indicator
On (red) Critical or major alarm occurs to service.
On Minor or remote alarm occurs to service.
(yellow)
Off No service is configured. (The SRV indicator of the
XCS has no "Off".)
z Board Indicators
Indicato Name Status Description
r
PROG Board On (red) Memory check failed/loading unit software failed/the
Softwar FPGA file is lost/the unit software is lost.
e Blinking 100ms on and 100ms off
Indicato (red) BOOTROM check failed.
r
Blinking 100ms on and 100ms off
quickly Writing FLASH.
(green)
slowly BIOS booting/loading FPGA/loading unit software.
(green)
On The board software or software for FPGA is
(green) uploaded successfully, or the board software is
initialized successfully.
z Board Indicators
ACT Service On The board is in working mode.

Activatio (green) The board is in the active mode.
n
Off The board is not in working mode.
Indicator
The board is in the standby mode.
quickly Backing up the system database in patches.
(green)
PWRA Indicator On The 48 V power supply A is normal.
for (green)
system
On (red) The 48 V power supply A is faulty (lost or failed).
power
supply Off No power supply inputs.
z Board Indicators
Indicato Name Status Description
r
PWRB Indicator On The 48 V power supply B is normal.
for (green)
system On (red) The 48 V power supply B is faulty (lost or failed).
power Off No power supply inputs.
supply
PWRC Indicator On The +3.3 V protection power is normal.
for (green)
protection On (red) The +3.3 V protection power is lost.
power
supply
ALMC Alarm cut On Currently in permanent alarm cut-off status.

indicator (green)
Off Give sound warning upon alarm.
z Fan Indicator
On (green) The fan is normal
On (red) The fan failure

STAT Fan indicator
On (yellow) The fan is stopped manually
Off The fan is not powered on or is absent.
Appendix 2: Power Consumption and Valid slots
Maximum Power Maximum Power Number of

Board
Consumption at 25(W) Consumption at 55(W) Occupied Slots
L4G 50.0 55.0 1
LQMS 52.9 58.2 1
LSX 45.5 50.1 1
M40 / D40 20.0 22.0 3
FIU 4.2 4.6 1
MR2 0.2 0.3 1
ROAM 66.0 72.6 3
WSM9 / WSD9 17.0 18.7 2
XCS 20.0 22.0 1
OAU1 33.0 36.3 2
Appendix 3:Abbreviations
Abbreviation Full Name
AFEC Advanced Forward Error Correction

ALC Automatic Level Control
APD Avalanche Photo Diode
APE Automatic Power Equilibrium
ESCON Enterprise Systems Connection
ETSI European Telecommunication Standards Institute
FICON Fiber Connection
IPA Intelligent Power Adjustment
PIN Positive Intrinsic Negative
ROADM Reconfiguration Optical Add/drop Multiplexer

OptiX OSN 6800 Hardware Description ISSUE

Uploaded by

Copyright:

Available Formats

OptiX OSN 6800 Hardware Description ISSUE

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

OptiX OSN 6800 Hardware Description ISSUE

Uploaded by

Copyright:

Available Formats

OptiX OSN 6800

Copyright 2007 Huawei Technologies Co., Ltd. All rights reserved.

z OptiX OSN 6800 is future-oriented according to the

z OptiX OSN 6800 achieves dynamic optical layer

z Before learn this course, you should have:

Studied OTN Basic Knowledge

z OptiX OSN 6800 Product Description

z OptiX OSN 6800 Hardware Description

z Upon completion of this course, you will be able to:

Describe the position and networking ability of OptiX OSN

List the main functions and features of OptiX OSN 6800

Outline the layout of OptiX OSN 6800 subrack

Generalize the categories of boards

List the main functions and features of the boards

2. Functions and Features

3. Cabinet, Subrack and Frame

1.2 Position in Networks

1.3 Networking and Applications

Electrical Grooming Line-side processing

Client service processing

GMPLS: Generalized multiprotocal label switching

Metro core layer

Metro convergence layer

OTM OADM OTM

OADM OADM OADM OADM

OADM OADM OADM

OADM OADM OADM

Ready for ASON

OADM OADM OADM

2. Functions and Features

3. Cabinet, Subrack and Frames

Realizes intra-ring two-dimensional grooming and inter-ring

z Supports DWDM and CWDM

z Integrated System and Open System Compatibility

z Electrical Layer Grooming Capacity

Distributed cross-connection of GE services, ODU1 signals and

z L2 electrical layer switching based on VLAN and Stack

z OptiX OSN 6800 can access multi-services:

Video and others

z Equipment Level Protection

Cross-connect board 1+1 protection

External memory for NE configuration data backup

Secondary power protection for OTU

z OSC and ESC

z ALS, IPA, ALC and APE functions

z Main/Slave Subrack Unified Management

2. Functions and Features

3. Cabinet, Subrack and Frame

3. Cabinet, Subrack and Frame

z OptiX OSN 6800 can be installed in:

Standard ETSI 300 mm cabinet

23-inch open rack

Quantity of configurable subracks in a ETSI 300mm 4 4

Quantity of configurable subracks in a Standard ETSI 3 4

Quantity of configurable subracks in a 23-inch open rack (7 feet high): 4

z DC Power Distribution Box

Input interface area is divided into part A and part B

Part A is working, part B is protection.

Part A and part B access two 48V DC power each.

Part A and part B provide six power output interfaces each.