15EE101 Basic Electrical Engineering

This document outlines a basic electrical engineering course that provides an introduction to circuit analysis, electrical machines, and measuring instruments. The course consists of 5 units that cover fundamentals of DC circuits, magnetic circuits, AC circuits, electrical machines including motors and transformers, and electrical safety, wiring, and an introduction to power systems. The course aims to help students understand basic concepts in these areas and gain knowledge of principles, construction, and applications of relevant devices and equipment.

Uploaded by

Ashish Singh

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

352 views2 pages

15EE101 Basic Electrical Engineering

Uploaded by

Ashish Singh

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 2

BASIC ELECTRICAL ENGINEERING L T P C

Total Contact Hours - 30 2 0 0 2

15EE101
Prerequisite
Nil
PURPOSE
This course provides comprehensive idea about circuit analysis, working principles of machines
and common measuring instruments.
INSTRUCTIONAL OBJECTIVES
1. Understand the basic concepts of magnetic circuits, AC & DC circuits.
Explain the working principle, construction, applications of DC & AC machines and
2.
measuring instruments.
3. Gain knowledge about the fundamentals of wiring and earthing

UNIT I FUNDAMENTALS OF DC CIRCUITS (6 hours)

Introduction to DC and AC circuits, Active and passive two terminal elements, Ohms law,
Voltage-Current relations for resistor, inductor, capacitor , Kirchhoff's laws, Mesh analysis,
Nodal analysis, Ideal sources equivalent resistor, current division, voltage division

UNIT II MAGNETIC CIRCUITS (6 hours)

Introduction to magnetic circuits-Simple magnetic circuits-Faraday's laws, induced emfs and
inductances

UNIT III AC CIRCUITS (6 hours)

Sinusoids, Generation of AC, Average and RMS values, Form and peak factors, concept of
phasor representation, J operator. Analysis of R-L, R-C, R-L-C circuits. Introduction to three
phase systems - types of connections, relationship between line and phase values.

UNIT IV ELECTRICAL MACHINES & MEASURING INSTRUMENTS (6 hours)

Working principle, construction and applications of DC machines and AC machines (1 - phase
transformers, single phase induction motors: split phase, capacitor start and capacitor start & run
motors). Basic principles and classification of instruments -Moving coil and moving iron
instruments.

UNIT V ELECTRICAL SAFETY, WIRING &INTRODUCTION TO POWER SYSTEM

(6 hours)
Safety measures in electrical system- types of wiring- wiring accessories- staircase, fluorescent
lamps & corridor wiring- Basic principles of earthing-Types of earthing- Simple layout of
generation, transmission & distribution of power.
TEXT BOOK

1. Dash.S.S, Subramani.C, Vijayakumar.K, Basic Electrical Engineering, First edition,Vijay

Nicole Imprints Pvt.Ltd,2013

REFERENCES

1. Smarajt Ghosh, Fundamentals of Electrical & Electronics Engineering, Second edition,

PHI Learning, 2007.
2. Metha.V.K, Rohit Metha, Basic Electrical Engineering, Fifth edition, Chand. S & Co,
2012.
3. Kothari.D.P and Nagrath.I.J, Basic Electrical Engineering, Second edition, Tata McGraw -
Hill, 2009.
4. Bhattacharya.S.K, Basic Electrical and Electronics Engineering, First edition, Pearson
Education, 2011.