Were better

together...

the new name for plastics

www.wavin.co.uk

Below Ground Product Conversion Guide

All the choice.
All the quality.
All now under one name.
Some things are just better together. Like bacon and eggs,
pancakes and maple syrup, tea and biscuits and now
PlastiDrain plastics and OsmaDrain.
Weve brought together the best products from the PlastiDrain
range and incorporated them with the best products from
OsmaDrain. So you can now enjoy even more of the high
quality products, unrivalled service and extensive choice youve
come to rely on - but theyre now all available under one
industry-leading brand name... OsmaDrain.
With 35% more fittings than PlastiDrain plus, a greater variety
of universal and bottle gully fittings all supported by a
comprehensive range of inspection chambers, this new,
more comprehensive range means that whatever project
youre undertaking, all your needs will be covered.

the new name for plastics

Below Ground Product Conversion Guide www.wavin.co.uk

 Hepworth to OSMA Product Conversion Guide

Contents Page

Introduction 2-3
PlastiDrain to OsmaDrain 4-10
82mm & 110mm Diameter Pipe & Fittings 4-6
Drain Connectors 7
110mm Gully Fittings 7-8
Anti-Flood Valves 8
160mm Diameter Pipe & Fittings 8-9
Yard and Road Gullies 10

Hepworth Chambers to OSMA Chambers (plastic only) 11-17

Access Chambers Universal Access System 11-17

Numerical Index 18
Notes 19-20

We have developed this guide to help identify equivalent OsmaDrain pipe and fittings
codes to the PlastiDrain codes which you are accustomed to.
For a complete catalogue of all OsmaDrain products please refer to the OsmaDrain
price list and OsmaDrain product installation guide. Both of which can be downloaded
from www.wavin.co.uk
We have developed a simple key which tells you the products are compatible:
Fittings are compatible
Those fittings where an alternative is available in OsmaDrain but you cannot mix ranges
Obsolete, fittings no longer available
We hope you find this a useful resource

1
 PlastiDrain to OsmaDrain Product Introduction

New to OsmaDrain Range

S/S Square Top Rodding Point sealed, c/w coupling
Cost effective alternative to an inspection chamber or manhole
Existing PlastiDrain Cat. No. 4A10SA
New OsmaDrain Cat. No. 4D361
Available in 110mm only
45 socketed outlet, ease of alignment
Screw down sealed cover suitable for external or internal use
Suitable for loading up to 1.5 tonnes (domestic driveways,
when supported by a concrete plinth)
Square cover for easy abutment of paving slabs/blocks

Internal Blanking Plug

For use when blanking-off internal 110mm drain pipes
Existing PlastiDrain Cat. No. S89P
New OsmaDrain Cat. No. 4D291
For internal use
Airtight seal
Simple push-t connection to pipe

Internal Drain Connector soil stacks

For use when connecting 110mm spigotted drain pipe to a
110mm soil pipe
Existing PlastiDrain Cat. No. S464P
New OsmaDrain Cat. No. 4D464
For internal use
Airtight seal
Simple push-t connection into 110mm spigotted
drain pipe

OSMA below ground drainage systems comply

where applicable with the requirements of the
following British Standards.
BS EN13476
BS EN13598
BS 4660:1989/2000
BS 7158:2001

2
 PlastiDrain to OsmaDrain Product Introduction

New to OsmaDrain Range

D/S Adaptors to Waste Pipe
For use when connecting 32, 40 & 50mm waste pipe to 110mm spigotted drain pipe
Existing PlastiDrain Cat. No's:
32mm - 4A03A
40mm - 4A04A
50mm - 4A05A
New OsmaDrain Cat. No's:
32mm - 4D287
40mm - 4D288
50mm - 4D286
For internal use
Airtight seal
Simple push-t connection over spigotted 110mm drain pipe

S/S Paved Area Gully 110mm

For use when draining paved/concrete drives and hard standing areas
Existing PlastiDrain Cat. No. 4A22A
New OsmaDrain Cat. No. 4D860
Manufactured from tough polypropylene
Rodding point is provided by means of a removable dip tube
Lightweight, compact design
Trapped, easy to clean and roddable
One tonne wheel load
110mm socketed outlet
150mm square hinged, captive grid
360 rotatable grid

P/E Gully 110mm

For use when discharging external rainwater or waste pipes to drain
Existing PlastiDrain Cat. No. 4A12A
New OsmaDrain Cat. No. 4D850
Manufactured from tough polypropylene
Lightweight, compact design
Square rotating top
Trapped, easy to clean and roddable
Dedicated, versatile grid
Lightweight

3
 PlastiDrain to OsmaDrain
Hepworth OSMA Hepworth Compat- Notes OSMA Size
Cat. No. Cat. No. Description ibility Image mm
82mm & 110mm Diameter Pipe & Fittings
3P01A3 3D073 Plain Ended Pipe 3m 82
3P01A6 3D076 Plain Ended Pipe 6m 82
4P01A3 4D073 Plain Ended Pipe 3m 110
4P01A6 4D076 Plain Ended Pipe 6m 110
4P01C6 4D066 Plain Ended Slotted Pipe 6m 110

3P02B 3D205 D/S Coupling PVC-U 82

4P02A 4D205 D/S Coupling Polypropylene OSMA version is PVC-U 110
4P02B 4D205 D/S Coupling PVC-U 110
4P02C 4D105 PVC-U Coupling Repair 110
4P02D 4D124 Socket S/S Loose Socket Solvent 110

4P50C 4D115 Socket S/S Expansion Socket 110

Install vertically

4P03B 4D561 D/S Bend 87.5 110

4P04B 4D563 D/S Bend 45 110
4P05B 4D566 D/S Bend 30 110
4P06B 4D567 D/S Bend 15 110
3P03A 3D161 S/S Bend 87.5 82
3P04A 3D163 S/S Bend 45 82
4P03A 4D161 S/S Bend 87.5 110
4P04A 4D163 S/S Bend 45 110
4P05A 4D166 S/S Bend 30 110
4P06A 4D167 S/S Bend 15 110
4F05A 4D173 S/S Flexible Bend 0 to 25 110

4P07B 4D281 P/E Long Radius Bend 87.5 110

450mm radius

4P07F 4D581 D/S Long Radius Rest Bend 87.5 110

375mm radius

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
4
 PlastiDrain to OsmaDrain
Hepworth OSMA Hepworth Compat- Notes OSMA Size
Cat. No. Cat. No. Description ibility Image mm
82mm & 110mm Diameter Pipe & Fittings
3P08B 3D190 D/S Equal Junction 87.5 82
4P08B 4D190 D/S Equal Junction 87.5 110
4P09B 4D210 D/S Equal Junction 45 110

3P09C 3D213 T/S Equal Junction 45 82

4P08C 4D193 T/S Equal Junction 87.5 110
4P09C 4D213 T/S Equal Junction 45 110

4P11A 4D095 Reducer S/S Level Invert Reducer 110

110 x 82mm

3P10A n/a P/E Socket Stopper This item is no longer 82

available
4P10A 4D295 P/E Socket Stopper 110
S360 n/a Replacement Sealing Ring This item is no longer 110
available
4A15A 4D295 Temporary Pipe Cover fits into 110
socket

4A01A 4D107 Adaptor to Clay/Concrete Socket 110

mortar joint

4A02A n/a D/S W.C. Adaptor This item is no longer 110

available
4A03A 4D287 D/S Adaptor to Waste Pipe 32mm 110
4A04A 4D288 D/S Adaptor to Waste Pipe 40mm 110
4A05A 4D286 D/S Adaptor to Waste Pipe 50mm 110

3A06A 3D206 D/S Adaptor to Rainwater Pipe 68mm 82

Round terracotta
3A06A n/a D/S Adaptor to Rainwater Pipe 68mm This item is no longer 82
Round black available
3A06S n/a D/S Adaptor to Rainwater Pipe This item is no longer 82
65mm Square available
4A06A 4D149 D/S Adaptor to Rainwater Pipe 68mm 110
Round terracotta

4A06R n/a D/S Adaptor to Rainwater Pipe 68mm This item is no longer 110
Round black available
4A06S n/a D/S Adaptor to Rainwater Pipe 68mm This item is no longer 110
Square black available
4A07A n/a D/S Adaptor to Rainwater Pipe This item is no longer 110
82mm Round available
4A07U 4D159 Rainwater Adaptor to Round or Square 110
Rainwater Pipes up to 76mm

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
5
 PlastiDrain to OsmaDrain
Hepworth OSMA Hepworth Compat- Notes OSMA Size
Cat. No. Cat. No. Description ibility Image mm
82mm & 110mm Diameter Pipe & Fittings
4A08A 4D127 D/S Adaptor to Clay HepSleve 110
4A18A 4D129 D/S Adaptor to Clay SuperSleve 110
4A09A n/a P/E Adaptor to Clay/Cast Iron Spigot This item is no longer 110
single mortar joint socket available
4A09B n/a D/S Adaptor to Cast Iron This item is no longer 110
available
4A19A n/a P/E Spigot Adaptor This item is no longer 110
available
S420 2S498 Boss Adaptor for Push-fit/Solvent/ 110
Copper 11/4" 32mm
S421 2S499 Boss Adaptor for Push-fit/Solvent/ 110
Copper 11/4" 40mm
4A10SA 4D361 S/S Square Top Rodding Point 110
sealed, c/w coupling

4A20A n/a P/E Straight Rodding Eye Terminal This item is no longer 110
available
4A11A 4D274 S/S Access Pipe c/w screw cap 110

4A13A 4D420 D/S Access Pipe c/w screw down 110

cover

4P03D 4D169 S/S Access Bend 87.5 c/w screw 110

cap

4A13C 4D492 Double Access Junction 45 c/w 110

screw down cover and optimal left/
right stoppers

4A21A 4D292 P/E Access Plug c/w screw cap 110

4A14A 4D131 Wall Protection Sleeve 110

S300/A 4S595 PVC-U Soil Manifold Inlet 3 = Also need to select special 110
32/40mm inlets OSMA manifold fittings
(2S354W, 2S355W, 2S356W)

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
6
 PlastiDrain to OsmaDrain
Hepworth OSMA Hepworth Compat- Notes OSMA Size
Cat. No. Cat. No. Description ibility Image mm
Drain Connectors
S89P 4D291 Internal Blanking Plug 110

S460P 4D298 Internal Drain Connector to 110

32mm/40mm Waste
S462P 4D299 Internal Drain Connector to 50mm 110
Waste
S464P 4D464 Internal Drain Connector to Soil 110
Stacks

110mm Gully Fittings

4A12A 4D850 P/E Gully square with rotating top 110
and grid

4A12H 4D851 Rotating Top and Grid spare Now the spare for 4D850

4A12B 4D852 Grid spare for 4A12A Now the spare for 4D850

4A17A 4D900 S/S Inlet Gully polypropylene 110

4A17D n/a Dip Tube Trap spare This item is no longer 110
available
4A17E n/a Raising Piece height 300mm This item is no longer 110
available
4A17G n/a Hopper c/w grid This item is no longer 110
available
4A22A 4D860 S/S Paved Area Gully polypropylene 110

4A22B 4D861 Top Assembly c/w grid Now the spare for 4D860

4A22C 4D862 Sealed Cover Plate

4A22D 4D863 Metal Grid

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
7
 PlastiDrain to OsmaDrain
Hepworth OSMA Hepworth Compat- Notes OSMA Size
Cat. No. Cat. No. Description ibility Image mm
110mm Gully Fittings
4H10A 4D507 P/E Square Hopper c/w grid and two 110
boss inlets

4H11B n/a Grid spare This item is no longer

available
4H11A 4D508 P/E Rectangular Hopper c/w grid 110
and two boss inlets

4H11B n/a Grating spare This item is no longer

available
4H11E n/a Cover Plate spare This item is no longer
available
4H12A 4D527 P/E Sealed Hopper c/w screwed 110
blanking plate

4T10C 4D500 D/S Lowback P Trap with improved 110

stability for trench seating

Anti-Flood Valves
QS100P 4D921 S/S 110mm Anti-Flood Valve single 110
flap
QS150P 6D921 S/S 160mm Anti-Flood Valve single 160
flap
160mm Diameter Pipe & Fittings
6P01A3 6D073 Plain Ended Pipe 3m 160
6P01A6 6D076 Plain Ended Pipe 6m 160
6P01C6 6D066 Plain Ended Slotted Pipe 6m 160

6P02A 6D205 D/S Coupling Polypropylene OSMA version is PVC-U 160

6P02B 6D205 D/S Coupling PVC-U 160
6P02C 6D105 PVC-U Coupling Repair 160
6P02D n/a Socket S/S Loose Socket Solvent This item is no longer 160
available
6P03B 6D561 D/S Bend 87.5 160
6P04B 6D563 D/S Bend 45 160
6P05B 6D566 D/S Bend 30 160
6P06B 6D567 D/S Bend 15 160

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
8
 PlastiDrain to OsmaDrain
Hepworth OSMA Hepworth Compat- Notes OSMA Size
Cat. No. Cat. No. Description ibility Image mm
160mm Diameter Pipe & Fittings
6P03A 6D161 S/S Bend 87.5 160
6P04A 6D163 S/S Bend 45 160
6P05A 6D166 S/S Bend 30 160
6P06A 6D167 S/S Bend 15 160
6P07C 6D281 P/E Long Radius Bend 87.5 160
600mm radius

6P08C 6D193 T/S Equal Junction 90 160

6P09C 6D213 T/S Equal Junction 45 160

6P08F 6D199 T/S Unequal Junction 90 x 110mm 160

6P09F 6D219 T/S Unequal Junction 45 x 110mm 160

6P11A 6D099 Reducer S/S Level Invert Reducer 160

160 x 110mm

6P10A n/a P/E Socket Stopper This item is no longer 160

available
6A08A 6D127 D/S Adaptor to Clay HepSleve 160
6A18A 6D129 D/S Adaptor to Clay SuperSleve 160
6A09A n/a P/E Adaptor to Clay/Cast Iron Spigot This item is no longer 160
single mortar joint socket available
6A19A n/a P/E Spigot Adaptor This item is no longer 160
available
6A13A 6D274 S/S Access Pipe c/w screw cap 160

6A21A 6D292 P/E Access Plug c/w screw cap 160

S360/6 n/a Replacement Sealing Ring This item is no longer 160

available

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
9
 PlastiDrain to OsmaDrain
Hepworth OSMA Hepworth Compat- Notes OSMA Size
Cat. No. Cat. No. Description ibility Image mm
Yard and Road Gullies
4A30A 4D800 P/E Yard Gully available with 110
medium duty grating

4A31A n/a Domestic Duty Grating up to 1 This item is no longer

Tonne available
4A32A 4D810 Medium Duty Grating up to 5
Tonnes
4A33A 4D815 Combined Filter and Silt Bucket

4A34A n/a Yard Gully Raising Piece 300mm This item is no longer
high available
G01A n/a Polypropylene Gully Plain 150mm This item is no longer 160
outlet available
G02A n/a P/E Polypropylene Trap This item is no longer 160
available
G06A n/a S/S Polyethylene Gully Trapped This item is no longer 160
available
G07A n/a S/S Polyethylene Gully Trapped This item is no longer 160
available

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
10
 Hepworth Chambers to OSMA Chambers (plastic only)

Access Chambers Universal Access System

4D960 D/S Equal Shallow Inspection Chamber

Option 1
4D325 Round Cover & Frame

Mini-Access 4D961 Square Cover & Adjustable Frame

SDAC1/1

4D917 D/S Equal Multi-Base Shallow Inspection Chamber Base

Option 2 4D937 P/E Inspection Chamber Shaft

4D969 Square Cover & Adjustable Frame

(See pages 11-12 for full product details of options)

Hepworth OSMA OSMA Direct Product Features Shaft Dia Pipe Dia OSMA
Cat. No. Cat. No. Description Comparison (mm) (mm) Image
Access Chambers Universal Access System
Options
SDAC1/1 4D960 D/S Equal Shallow Inspection No Low cost option 250 110
Chamber Lightweight, easy
- 110mm straight channel with installation
one 110mm x 45 branch entry No wet trades required
either side of the main channel, for Shaft can be cut to length
use with either 4D325 or 4D961. Kitemarked
Supplied with 2 profiled
plugs
SDAC1/1 4D325 Round Cover & Frame - No Lightweight, easy 250
polypropylene installation
SDAC1/1 - Sealed, for use with 4D960 in Kitemarked
Option 1 situations requiring a loading Can be used internally
upto 10kN (1 Tonne), where the Non slip tread pattern
frame of the unit is supported by a
concrete plinth.
SDAC1/1 4D961 Square Cover & Adjustable No Lightweight, easy 250
Frame - polypropylene installation
- Sealed, for use with 4D960 in Kitemarked
situations requiring a loading Can be used internally
upto 10kN (1 Tonne), where the Non slip tread pattern
frame of the unit is supported by a Ideal for use with paving
concrete plinth. slabs

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
11
 Hepworth Chambers to OSMA Chambers (plastic only)
Hepworth OSMA OSMA Direct Product Features Shaft Dia Pipe Dia OSMA
Cat. No. Cat. No Description Comparison (mm) (mm) Image
Access Chambers Universal Access System
SDAC1/1 4D917 D/S Equal Inspection No Multiple base options 315 110
Chamber Base Lightweight, easy
- 110mm straight channel with installation
one 110mm x 45 branch entry No wet trades required
either side of the main channel, Kitemarked
for use with 4D937 shaft and
4D969 Cover and Frame. Other
base configurations available.
SDAC1/1 4D937 P/E Inspection Chamber No Push-fit shaft sections, 315
Shaft one or more can be used
SDAC1/1 - 315m diameter x 150mm long to achieve required invert
for use with all types of Multi-Base depth
Option 2
315mm bases. Supplied with pre- Kitemarked
fitted elastomeric seal.
SDAC1/1 4D969 Square Cover & Adjustable No Lightweight, easy 315
Frame - polypropylene installation
Kitemarked
- Sealed, for use with 4D960 in
External use only
situations requiring a loading
Ideal for use with paving
upto 15kN (1.5 Tonne), where the
slabs - 1.5kN (1.5 Tonne)
frame of the unit is supported by
loading
a concrete plinth. For external
use only.

Hepworth OSMA Hepworth Compat- Notes OSMA Size

Cat. No. Cat. No. Description ibility Image mm
Access Chambers Universal Access System
SDAC1/1 n/a Mixed Base OSMA alternative available, 315
315mm deep with 150/160mm please seek advice
straight through main channel with
two 150/160mm branches at 90 &
two 100/110mm branches at 45
SDC3 4D969 Polymer Cover & Frame (airtight) 315
345mm x 345mm square. Effective
height 85mm.
SDC4 4D937 Raising Piece 315
With rubber sealing ring. Effective
height 150mm.
SDC5 4D917 Base Unit 315
215mm deep with two 100/110mm
flexible inlets allowing 10 of
movement. Conversion adaptors
supplied.

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
12
Hepworth Chambers to OSMA Chambers (plastic only)

Access Chambers Universal Access System

D/S Equal Inspection Chamber 110mm
4D922
(2 x 45 & 2 x 90 L/RH branch entries)
SPIC1/1 Option
P/E Inspection Chamber Shaft
4D975
3 number of units required

Note: Cover & Frame not included in SPIC1/1 option

D/S Equal Inspection Chamber 110mm

4D922
(2 x 45 & 2 x 90 L/RH branch entries)
SPIC2/1 Option
P/E Inspection Chamber Shaft
4D975
2 number of units required

Note: Cover & Frame not included in SPIC2/1 option

Inspection Chambers Universal Access System

D/S Equal Shallow Inspection Chamber 160mm
6D928
(2 x 90 L/RH branch entries)
Option 1
P/E Inspection Chamber Shaft
4D975
3 number of units required

SPIC1/2

D/S Equal Shallow Inspection Chamber 160mm

6D929
(2 x 45 & 2 x 90 R/LH branch entries)
Option 2
P/E Inspection Chamber Shaft
4D975
3 number of units required

(See pages 14-16 for full product details of options)

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
13
 Hepworth Chambers to OSMA Chambers (plastic only)
Hepworth OSMA OSMA Direct Product Features Shaft Dia Pipe Dia OSMA
Cat. No. Cat. No. Description Comparison (mm) (mm) Image
Access Chambers Universal Access System
Options
SPIC1/1 4D922 D/S Equal Inspection No Low cost option 450 110
Chamber Base Lightweight, easy
- 110mm straight channel with installation
four 110mm (2 x 45 and 2 x 90) No wet trades required
left/right hand branch entries. Kitemarked
Supplied complete with 3 x Supplied with 3 profiled
110mm blank-off plugs for use in plugs for use in unused
SPIC1/1 inlets
unused side entries.
SPIC1/1 4D975 P/E Inspection Chamber No Push-fit shaft sections, 450
Shaft one or more can be used to
- 450m diameter x 305mm long achieve required invert
for use with 4D922 Base. Supplied depth
with pre-fitted elastomeric seal. Kitemarked
SPIC2/1 4D922 D/S Equal Inspection No Low cost option 450 110
Chamber Base Lightweight, easy
- 110mm straight channel with installation
four 110mm (2 x 45 and 2 x 90) No wet trades required
left/right hand branch entries. Kitemarked
Supplied complete with 3 x Supplied with 3 profiled
110mm blank-off plugs for use in plugs for use in unused
SPIC2/1 inlets
unused side entries.
SPIC2/1 4D975 P/E Inspection Chamber No Push-fit shaft sections, 450
Shaft one or more can be used to
- 450m diameter x 305mm long achieve required invert
for use with 4D922 Base. Supplied depth
with pre-fitted elastomeric seal. Kitemarked

SPIC1/2 6D928 D/S Equal Inspection No Low cost option 450 160
Chamber Base Lightweight, easy
- 160mm straight channel with installation
two 160mm x 90 left/right hand No wet trades required
branch entries. Supplied complete Kitemarked
with 1 x 160mm blank-off plug for Supplied with 1 profiled
SPIC2/1 use in unused side entry. plug for use in unused
Option 1 inlet
SPIC1/2 4D975 P/E Inspection Chamber No Push-fit shaft sections, 450
Shaft one or more can be used to
- 450m diameter x 305mm long for achieve required invert
use with 6D928 Base. Supplied with depth
pre-fitted elastomeric seal. Kitemarked

SPIC1/2 6D929 D/S UnEqual Inspection No Low cost option 450 160
Chamber Base Lightweight, easy
- 160mm straight channel with installation
four 110mm (2 x 45 and 2 x 90) No wet trades required
left/right hand branch entries. Kitemarked
Supplied complete with 3 x Supplied with 1 profiled
SPIC2/1 110mm blank-off plugs for use in plug for use in unused
Option 2 unused side entries. inlet
SPIC1/2 4D975 P/E Inspection Chamber No Push-fit shaft sections, 450
Shaft one or more can be used to
- 450m diameter x 305mm long for achieve required invert
use with 6D929 Base. Supplied with depth
pre-fitted elastomeric seal. Kitemarked

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
14
 Hepworth Chambers to OSMA Chambers (plastic only)
Hepworth OSMA Hepworth Compat- Notes OSMA Size
Cat. No. Cat. No. Description ibility Image mm
Access Chambers Universal Access System
SPIC1/1 n/a 100/110mm PPIC Polypropylene OSMA alternative available, 110
Inspection Chamber 475mm diameter please seek advice
supplied with four inlet stoppers,
940mm deep, with five 100/110mm
inlets
SPIC1/1N n/a 100/110mm PPIC Polypropylene Alternative available, please 450
Inspection Chamber 475mm diameter seek advice
supplied with four inlet stoppers,
940mm deep, with five 100/110mm
inlets
SPIC2/1 n/a 100/110mm PPIC Polypropylene OSMA alternative available, 450
Inspection Chamber 475mm diameter please seek advice
supplied with four inlet stoppers,
595mm deep, with five 100/110mm
inlets
SPIC1/2 n/a 150/160mm PPIC Polypropylene OSMA alternative available, 450
Inspection Chamber 475mm diameter please seek advice
supplied with four inlet stoppers,
1030mm deep, with 150/160mm
straight through main channel with
2x150/160mm branches at 90 and
2x100/110 branches at 45
SPIC1/2N n/a Mixed Base PPIC Polypropylene Alternative available, please 450
Inspection Chamber 475mm diameter seek advice
supplied with four inlet stoppers,
1030mm deep, with 150/160mm
straight through main channel with
2x150/160mm branches at 90 and
2x100/110 branches at 45
SPIC4 4D975 Raising Piece 450
- 175mm high

SPIC5 n/a Sealing Ring for Raising Piece This item is no longer
available
SPIC6/1 4D922 Base
- 225mm deep, with five 100/110
inlets. 4 inlet stoppers supplied.

SPIC6/1N n/a Base Alternative available, please 450

- 225mm deep, with five 100/110 seek advice
inlets. Conversion adaptors and 4 inlet
stoppers supplied.
SPIC6/2 6D928 Mixed Base 450
Option 1 - 315mm deep, with 150/160mm
straight through main channel
with 2x150/160 branches at 90 &
2x100/110 branches at 45. 4 inlet
stoppers supplied.

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
15
 Hepworth Chambers to OSMA Chambers (plastic only)
Hepworth OSMA Hepworth Compat- Notes OSMA Size
Cat. No. Cat. No. Description ibility Image mm
Access Chambers Universal Access System
SPIC6/2 6D929 Mixed Base 450
Option 2 - 315mm deep, with 150/160mm
straight through main channel
with 2x150/160 branches at 90 &
2x100/110 branches at 45. 4 inlet
stoppers supplied.
SPIC6/2N n/a Mixed Base Alternative available, please 450
- 315mm deep, with 150/160mm seek advice
straight through main channel
with 2x150/160 branches at 90 &
2x100/110 branches at 45.
SPIC7 6D099 Inlet Adaptor 150mm to 100mm 110

SPICBPLH 4D948 Left Hand Baffle Plate

- for use in 100/110 SPIC bases.

SPICBPRH 4D949 Right Hand Baffle Plate

- for use in 100/110 SPIC bases.

UGS 4D926 Extra Stopper 110

UYS 6D926 Extra Stopper 160

M09H n/a Extra Conversion Adaptor 100mm This item is no longer

to 110mm available
M09J n/a Extra Conversion Adaptor 150mm This item is no longer
to 160mm available
SPK8 4D924 Round Ductile Iron Cover & Plastics
Frame
- includes security clips for additional
safety EN124 A15 35kN.
SPK9 4D942 Round Ductile Iron Cover & Plastics
Frame
- includes security clips for additional
safety EN124 A15 35kN.
SPK8 n/a Spare Security Clip for SPK8 & SPK9 This item is no longer
+9CLIP available
SPK10 4D924 Round Composite Cover & Plastics
Frame
- includes security clips for additional
safety EN124.
SPK11 n/a Round Composite Cover & Plastics This item is no longer
Frame available

UCIF n/a Spare Round Composite Cover for This item is no longer
SPK10 & SPK11 available

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
16
 Hepworth Chambers to OSMA Chambers (plastic only)
Hepworth OSMA Hepworth Compat- Notes OSMA Size
Cat. No. Cat. No. Description ibility Image mm
Access Chambers Universal Access System
SPKS8 4D920 Square Ductile Iron Cover & Plastics
Frame (airtight)
- includes security clips for additional
safety EN124 A15 35kN.
SPCR8 4D945 Recessed Cover
- for optional surface finish.

= Compatible = Alternative available (but cannot mix ranges) = Obsolete (no longer available)
17
 Hepworth to OSMA
Osma Product
Product Compatibility
Compatibility

Numerical Index
Hepworth OSMA Page Hepworth OSMA Page Hepworth OSMA Page
Cat. No. Cat. No. No Cat. No. Cat. No. No Cat. No. Cat. No. No
3A06A 3D206 5 4P01A6 4D076 4 M09H n/a 16
3A06A n/a 5 4P01C6 4D066 4 M09J n/a 16
3A06S n/a 5 4P02A 4D205 4 QS100P 4D921 8
3P01A3 3D073 4 4P02B 4D205 4 QS150P 6D921 8
3P01A6 3D076 4 4P02C 4D105 4 S89P 4D291 7
3P02B 3D205 4 4P02D 4D124 4 S300/A 4S595 6
3P03A 3D161 4 4P03A 4D161 4 S360 n/a 5
3P04A 3D163 4 4P03B 4D561 4 S360/6 n/a 9
3P08B 3D190 5 4P03D 4D169 6 S420 2S498 6
3P09C 3D213 5 4P04A 4D163 4 S421 2S499 6
3P10A n/a 5 4P04B 4D563 4 S460P 4D298 7
4A01A 4D107 5 4P05A 4D166 4 S462P 4D299 7
4A02A n/a 5 4P05B 4D566 4 S464P 4D464 7
4A03A 4D287 5 4P06A 4D167 4 SDAC1/1 4D960 11
4A04A 4D288 5 4P06B 4D567 4 SDAC1/1 4D325 11
4A05A 4D286 5 4P07B 4D281 4 SDAC1/1 4D961 11
4A06A 4D149 5 4P07F 4D581 4 SDAC1/1 4D917 12
4A06R n/a 5 4P08B 4D190 5 SDAC1/1 4D937 12
4A06S n/a 5 4P08C 4D193 5 SDAC1/1 4D969 12
4A07A n/a 5 4P09B 4D210 5 SDC3 4D969 12
4A07U 4D159 5 4P09C 4D213 5 SDC4 4D937 12
4A08A 4D127 6 4P10A 4D295 5 SDC5 4D917 12
4A09A n/a 6 4P11A 4D095 5 SPCR8 4D945 17
4A09B n/a 6 4P50C 4D115 4 SPIC1/1 n/a 15
4A10SA 4D361 6 4T10C 4D500 8 SPIC1/1N n/a 15
4A11A 4D274 6 6A08A 6D127 9 SPIC1/2 n/a 15
4A12A 4D850 7 6A09A n/a 9 SPIC1/2N n/a 15
4A12B 4D852 7 6A13A 6D274 9 SPIC2/1 n/a 15
4A12H 4D851 7 6A18A 6D129 9 SPIC4 4D975 15
4A13A 4D420 6 6A19A n/a 9 SPIC5 n/a 15
4A13C 4D492 6 6A21A 6D292 9 SPIC6/1 4D922 15
4A14A 4D131 6 6P01A3 6D073 8 SPIC6/1N n/a 15
4A15A 4D295 5 6P01A6 6D076 8 SPIC6/2 6D928 15
4A17A 4D900 7 6P01C6 6D066 8 SPIC6/2 6D929 16
4A17D n/a 7 6P02A 6D205 8 SPIC6/2N n/a 16
4A17E n/a 7 6P02B 6D205 8 SPIC7 6D099 16
4A17G n/a 7 6P02C 6D105 8 SPICBPLH 4D948 16
4A18A 4D129 6 6P02D n/a 8 SPICBPRH 4D949 16
4A19A n/a 6 6P03A 6D161 9 SPK8 4D924 16
4A20A n/a 6 6P03B 6D561 8 SPK9 4D942 16
4A21A 4D292 6 6P04A 6D163 9 SPK10 4D924 16
4A22A 4D860 7 6P04B 6D563 8 SPK11 n/a 16
4A22B 4D861 7 6P05A 6D166 9 SPKS8 4D920 17
4A22C 4D862 7 6P05B 6D566 8 UCIF n/a 16
4A22D 4D863 7 6P06A 6D167 9 UGS 4D926 16
4A30A 4D800 10 6P06B 6D567 8 UYS 6D926 16
4A31A n/a 10 6P07C 6D281 9
4A32A 4D810 10 6P08C 6D193 9
4A33A 4D815 10 6P08F 6D199 9
4A34A n/a 10 6P09C 6D213 9
4F05A 4D173 4 6P09F 6D219 9
4H10A 4D507 8 6P10A n/a 9
4H11A 4D508 8 6P11A 6D099 9
4H11B n/a 8 +9CLIP n/a 16
4H11B n/a 8 G01A n/a 10
4H11E n/a 8 G02A n/a 10
4H12A 4D527 8 G06A n/a 10
4P01A3 4D073 4 G07A n/a 10

18
 Hepworth to OSMA Product Compatibility

Notes

19
 Hepworth to OSMA Product Compatibility

Notes

20
Our Guarantee
OSMA products are manufactured to the
same high standards which youve come to
rely on, including a commitment to the British
Kitemark and all relevant European standards.
This commitment ensures reliability and long
lasting service. Whilst it remains the responsibility
of the installer, as always, to satisfy themselves
that products are suitable for the purpose
and application intended, Wavin stands by its
standard terms and conditions of sale which
state unless otherwise indicated in writing,
goods are guaranteed against defects in
materials or manufacturing for a period
of 12 months from delivery. This promise
remains intact, irrespective of whether you
install a single or mixed system from Wavin.

Below Ground Product Conversion Guide www.wavin.co.uk

You can rely on us.
Everything in the new OsmaDrain range is manufactured to the same high
standards youve come to rely on. In fact, every fitting we make has been
designed to exceed British and European standards. Exactly what youd expect
from an industry-leading company with over 50 years experience.

Together we get the job done

For OSMA products and information
visit www.wavin.co.uk
For further guidance for conversion from
Hepworth Plastics visit
http://codeconverter.wavin.co.uk/
For more information contact us on:
Tel 0844 856 5152
or email [email protected]

Disclaimer: Wavin operates a programme of continuous product development and therefore reserves the right to modify or
amend the specification of their products without notice. All information in this publication is given in good faith and believed
EN007

to be correct at the time of going to press. However, no responsibility can be accepted for any errors, omissions or incorrect
assumptions. Users should satisfy themselves that products are suitable for the purpose and application intended.

Below Ground Product Conversion Guide www.wavin.co.uk