User Manual

V1.0 / 2014
General Information
Please review the product manual carefully, handle
the product in strict accordance with the manual.

Welcome To Use
Thanks for purchasing a product from ALLScanner Tech Co., Ltd.
This manual provides a comprehensive overview and standard
configuration for users.
This manual describes product information, hardware connection,
software installation and usage etc significant information.
Please read this instruction manual and familiarize yourself with
your device before operating. The manual only states the
operational method of use, specific vehicle diagnosis and
maintenance please refer to original maintenance manual.
ALLScanner reserves the rights to make any change to product
designs and specifications without notice.

Copyright
Copyright 2014 by ALLScanner Tech Co., Ltd. All rights reserved.
No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise,
without the prior written permission of ALLScanner.

Trademark
is a registered trademark of ALLScanner Tech Co., Ltd.
is a registered trademark of ALLScanner Tech Co., Ltd.

In addition to the above-mentioned, All other names of actual

companies and products mentioned herein may be the
trademarks of their respective owners.

1
Product Introduction
Profile
Brand-new design VXDIAG, first integrated the three automotive
industry standards, supports all major vehicle bus protocols,
have strong compatibility and it is the best equipment to realize
OEM level diagnostic functions.

Features
One Device to Support Multiple OEM Diagnostics

Achieved the world's most of brand OEM level vehicle

diagnostic, One device can replace mass expensive OEM tools

Advanced Diagnostics fully consistent with the OEM tools, even

beyond the OEM tools

One-click to install OEM support driver and update online, Easy

to use

Brand-New Design VXDIAG Hardware

Equipped with high-speed processor VXDIAG is a

high-performance Vehicle Network Interface

Support 4 x CAN BUS and 2 x K-Line/L-Line, support

multi-protocol high-speed and concurrent communication

With the innovation design of OBD-II intelligent bus multiplex

hardware, one device can diagnosis all models and fully meet
the future demand for complex vehicle communication.

Supports 24V heavy-duty and diesel vehicles communication

Rugged design can be used in a variety of harsh environments

Compatible with Three Automotive Industry Standard

SAE-J2534-1/2 Pass-Thru Driver with EURO 5

2
 ISO-22900-1/2 MVCI with D-PDU Driver

RP-1210A/B/C Heavy Duty VDA Driver

J2534 OEM Level ECU Reprogramming Function

ECU software update and calibration

ECU replace flash and programming

OEM Vehicle Diagnostic Function

# OEM Diagnostic Software Compatible Status
1 PASSTHRU SAE-J2534-1/2 Pass-Thru YES Release
2 PORSCHE Porsche PIWIS-II Tester YES Release
3 TOYOTA TOYOTA Techstream TIS YES Release
4 HONDA HONDA Diagnostic System HDS YES Release
5 SUBARU SUBARU Select Monitor SSM YES Release
6 VOLVO VOLVO VIDA YES Release
7 JLR Jaguar & Land Rover SDD YES Release
8 CHRYSLER Chrysler wiTECH Diagnostic YES Develop
9 GM GM GDS2 YES Develop
10 GM GM Tech2Win YES Develop
11 FORD FORD IDS YES Develop
12 MAZDA MAZDA IDS YES Develop
13 KIA KIA GDS YES Develop
14 HYUNDAI HYUNDAI GDS YES Develop
15 MMC Mitsubishi MUT-III YES Develop
16 NISSAN * NISSAN Consult-III Plus YES Develop
17 SUZUKI * Suzuki SDT-II YES Develop
18 VAG * VW & AUDI ODIS YES Develop
19 BMW * BMW RHEINGOLD ISTA/D YES Develop
20 BENZ * BENZ XENTRY YES Develop
21 FERRARI * Ferrari DEIS Tester YES Develop
22 MASERATI * Maserati Diagnosi MDVCI YES Develop

Vehicle Protocols Coverage

3
Supported Automotive ISO-9141 K-Line
Protocols ISO-14230 K-Line
ISO-15765 CAN
SAE-J1850-VPW (GM Class2)
SAE-J1850-PWM (FORD SCP)
ISO-11898-2 DWCAN
ISO-11898-3 DWFTCAN
SAE-J2411 Single Wire CAN (GMLAN)
VAG TP16 CAN
VAG TP20 CAN (SAE-J2819)
VAG KW81 (SAE J2818)
SAE-J2610 SCI (Chrysler)
SAE-J1567 CCD BUS (Chrysler)
SAE-J2740 GM ALDL
SAE-J2809 (HONDA DIAG-H)
NISSAN DDL UART with CLOCK
BMW DS2
FORD UBP
Supported Heavy-duty CAN125/CAN250/CAN500/CAN1000
Protocols SAE-J1939 CAN
SAE-J1708/J1587 On RS485
CAT DATALINK (Caterpillar)
ATA DATALINK (Caterpillar)

Specifications
ITEM DESCRIPTION
CPU 32bit 180MHz ARM CPU
Storage 1MByte
Cable InterfacePC USB2.0
Network InterfaceOptional LAN 10/100M Ethernet
Wireless InterfaceOptional WLAN 802.11 b/g/n Wi-Fi

4
Diagnostic Interface 24PIN highly reliable and easy-swap
interface to OBD-II 16PIN
Indicator Light 4 LED: Power, Wireless, Host and Vehicle.
Power Vehicle power input: DC 9V-36V
Compatible: 12V&24V
Power Dissipation 2W
Size L x W x H = 175 x 110 x 45mm
Weight Device Weight: 0.6 Kg
Package Weight: 2.3 Kg
Shell Aluminum metal & Rugged plastic shell
Working Temperature -20+70 C
Storage Temperature -40+85 C
Standard Certification Certification of Euro CE and US FCC

Product Overview

Device Operation Status (Red)

Wireless Network Status (Blue)
Host Communication Status(Blue)
Vehicle Communication Status(Blue)

5
Product Package

VCI Device

USB LAN cable

OBD-II diagnostic cable

Tool box and package

CD, User Manual, Fix Card

6
Software Setup
Computer Requirements
Processor: Pentium 4 / 1.6GHz+.
Memory: 2G Bytes or more.

Hard disk: 40G or more.

Display: Resolution 1024x768 or higher.

Network interfaces: LAN 10 / 100M or 802.11b / g.

Communication Interface: USB2.0 or USB3.0

Operating System: Windows XP / Vista / Win7 / Win8 / Win8.1.

Software Installation
Before start to diagnose vehicle, you have to install VX Manager
and driver which are stored in the CD-ROM, or you can browse
http://www.vxdiag.net to download the newest setup files.

1
Run VX Manager.exe to
setup

7
 2
Click [Next]

3
Select [I accept the
agreement], then click
[Next]

4
During installation,
disconnect USB cable to
the computer, then click
[Next]

8
 5
Software Installing

6
VXDIAG SDK Driver
installing

7
Setup complete. The
shortcut will create on the
desktop

9
Start to Use
Hardware Connection
Connect OBDII cable to the vehicle 16pin diagnostic port, and
USB cable to the computer.

After device boot complete, the power led will flash, and
the buzzer will prompt.

Install USB driver for Windows 7 / 8 / 8.1

The first time to connect USB cable to the computer, Windows
will prompt [Installing device driver].
Windows automatically complete driver installation.

Install USB Driver for Windows XP

The first time to connect USB cable to the computer, Windows
will prompt [Found New Hardware],

Please follow these steps to complete USB driver installation.

10
 1
Select [No, not this time],
then click [Next]

2
Select [Install Driver
Automatically], then click
[Next]

3
Please wait while the
wizard installs the
software

11
 4
Complete Found New
Hardware Wizard, click
[Finish]

Thereafter, it will pop up the second time [Found New Hardware

Wizard], same as above.

The USB Driver installed completed:

After USB driver is successfully installed, PC LED will

flashing.

12
VX Manager
Please make sure the device is connected. Run VX Manager, The
information of device will be displayed in Device Manager.

Basic Functions
ReConnect To establish a connection with the device

Firmware Upgrade device firmware from server

License Update device license from server

Restart Reset device and start to run

Self Test Run device test program and report

HW Test Device LED flashing and buzzer beep

13
Device License
You can check your license status in Device License. You can
buy the License from the dealer.

Vehicle Diagnosis
VX Manager can manage multiple original diagnosis functions.

14
To use the original factory diagnosis functions, you will need to
install corresponding vehicle diagnosis driver.
Click an application in vehicle diagnosis window, and you will get
a driver installation window.

Install VX Manager will download the newest diagnostic

driver from server and install, then you can start to use the
original diagnosis function. The installation UI is below:

Update Update installed diagnostic driver from server.

Uninst Uninstall the diagnostic driver.
Run Run the original diagnostic application.

15
Warranty Terms

One Year Warranty

1. The warranty is valid from the date of dispatch until the end
of 1 year. If the invoice is lost, the warranty is valid from the
date of manufacture.
2. Warranty covers repairs or replacement of item in the event
that the damages are caused by design or material defect or
fault of production during the warranty period. The invoice
must be presented in order to make this claim.
3. During the warranty period, we will cover the cost of postage
for product repairs; after the warranty period, you will be
responsible the delivery cost.
4. The warranty offered is strictly for the purchased item only.
We will not be held liable for any defects or damage on any
other item(s) used in conjunction with this product.
5. The laptop that comes with the product is not built by us. The
manufacturer of the laptop is responsible for its after-sale
service.
6. We also cover damages excluded in the quality assurance. If
accessory replacement is necessary, we will let you know in
advance. You will be responsible for the material cost and
delivery cost.

General Exclusions (What's NOT Covered):

1. Faults caused by fire, dust, sand, water contamination or
ingress, fall or shock, chemical corrosion, blown fuse, theft,
dirt, dampness or corrosion, leaky batteries, incorrect use of
power supply or other adverse weather conditions.

16
2. Damages caused by repair or tuning or improper installation
or repairs by unauthorized personnel.
3. Damages caused by illegal operation such as reading or
changing product programs.
4. Products whose mechanical serial number or electronic serial
number has been deleted, changed or damaged.
5. Malfunction caused due to exposure to excessive heat or
extreme cold.
6. Wear or damages of qualified parts through natural use.

17
Service and Support
Technique Support
You can browse the product Wiki from http://www.vxdiag.net
There was some useful documents and resources:
VXDIAG Software installation and usage.

Multiple OE Diagnostic software installation and usage.

Multiple OE Diagnostic help tutorials and videos.

Repair Service
If your product need repair, Please download and fill out the
repair form, Be sure to include the following information
Contact name

Phone number

Product Serial Number

Fault description

Fix Card
Delivery Address

Other problems can contact us:

Address 103, A Building, Shenzhen Academy of Aerospace
Technolgy, 10 South Road, High-tech Zone, Nanshan
Dist, Shenzhen, P.R.China
Telephone +86-0755-33000960
Post 518057
Sales [email protected]
Support [email protected]

18


19


VXDIAG,
VXDIAG

OEM

VXDIAG

VXDIAG

4 CAN BUS2 K-Line/L-Line

OBD-II

12V 24V

SAE-J2534-1/2 Pass-Thru Driver with EURO 5

ISO-22900-1/2 MVCI with D-PDU Driver

RP-1210A/B/C Heavy Duty VDA Driver

J2534 ECU

ECU

ECU

20

# OEM Diagnostic Software Compatible Status
1 PASSTHRUU SAE-J2534-1/2 Pass-Thru YES Release
2 PORSCHE Porsche PIWIS-II Tester YES Release
3 TOYOTA TOYOTA Techstream TIS YES Release
4 HONDA HONDA Diagnostic System HDS YES Release
5 SUBARU SUBARU Select Monitor SSM YES Release
6 VOLVO VOLVO VIDA YES Release
7 JLR Jaguar & Land Rover SDD YES Release
8 CHRYSLER Chrysler wiTECH Diagnostic YES Develop
9 GM GM GDS2 YES Develop
10 GM GM Tech2Win YES Develop
11 FORD FORD IDS YES Develop
12 MAZDA MAZDA IDS YES Develop
13 KIA KIA GDS YES Develop
14 HYUNDAI HYUNDAI GDS YES Develop
15 MMC Mitsubishi MUT-III YES Develop
16 NISSAN * NISSAN Consult-III Plus YES Develop
17 SUZUKI * Suzuki SDT-II YES Develop
18 VAG * VW & AUDI ODIS YES Develop
19 BMW * BMW RHEINGOLD ISTA/D YES Develop
20 BENZ * BENZ XENTRY YES Develop
21 FERRARI * Ferrari DEIS Tester YES Develop
22 MASERATI * Maserati Diagnosi YES Develop

ISO-9141 K-Line
ISO-14230 K-Line
ISO-15765 CAN
SAE-J1850-VPW (GM Class2)
SAE-J1850-PWM (FORD SCP)
ISO-11898-2 DWCAN

21
 ISO-11898-3 DWFTCAN
SAE-J2411 Single Wire CAN (GMLAN)
VAG TP16 CAN
VAG TP20 CAN (SAE-J2819)
VAG KW81 (SAE J2818)
SAE-J2610 SCI (Chrysler)
SAE-J1567 CCD BUS (Chrysler)
SAE-J2740 GM ALDL
SAE-J2809 (HONDA DIAG-H)
NISSAN DDL UART with CLOCK
BMW DS2
FORD UBP
CAN125/CAN250/CAN500/CAN1000
SAE-J1939 CAN
SAE-J1708/J1587 On RS485
CAT DATALINK (Caterpillar)
ATA DATALINK (Caterpillar)

32bit 180MHz ARM
1M Byte
PC USB 2.0
PC LAN 10/100M
PC WLAN 802.11 b/g/n
24PIN OBD-II 16PIN
4 LED
DC 9V-36V

22
 12V 24V
2W
L x W x H = 175 x 110 x 45mm
0.6Kg
++2.3Kg
+
-20+70 C
-40+85 C
CE FCC

23


USB

OBD-II

24


PC
4/1.6GHz

1G Bytes
40G

1024x768

LAN 10/100M 802.11b/g

USB2.0 USB3.0

Windows XP / Vista / Win7 / Win8 / Win8.1

PC VX Manager
CD-ROM
http://www.vxdiag.net

1
VX Manager

25
 2
[ Next ]

3
[ I accept the
agreement ]
[ Next ]

4
USB

[ Next ]

26
5

27


OBD-II
PC USB PC

USB Windows 7 / 8 / 8.1

USB PC Windows

USB Windows xp
USB PC Windows

28
1

29
 4

USB

USB PC

30
VX Manager
VX Manager

31


32


VX Manager

33


1.

2.

3.

4.

5.

6.

1.

2.

3.

4.

5.

6.

34


http://www.vxdiag.net Wiki

VXDIAG

6
A A103-104
+86-0755-33000960
518057
[email protected]
[email protected]

35
Copyright 2008-2014 ALLScanner
All rights reserved.
http://www.allscanner.com