Grundfos CR 1 19 A FGJ A e Hqqe
Grundfos CR 1 19 A FGJ A e Hqqe
Grundfos CR 1 19 A FGJ A e Hqqe
[email protected]
tel. +31-15-261.09.00
fax. +31-15-261.62.89
Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)
enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron all
other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling
and easy service and access. Power transmission is via a split coupling. Pipework connection is via
combined DIN-ANSI-JIS flanges.
The pump is fitted with a 1-phase, fan-cooled asynchronous motor.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor
stool by means of two coupling guards.
The pump head, pump head cover and flange for motor mounting is made in one piece. The pump
head has a combined 1/2" priming plug and air vent screw.
1/8
Printed from Grundfos CAPS [2013.03.059]
Company name: Lenntech BV - lenntech.com
Created by: [email protected]
Phone: +31 15 2610900
Fax: +31 15 2616289
Date: -
The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal type is
assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type is
suitable for high-pressure applications. The cartridge construction also protects the pump shaft from possible
wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
- Rotating seal ring material: Silicon carbide (SiC)
- Stationary seat material: Silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of
this material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The chambers and impellers are made of stainless steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,
and the shape of the blades ensure a high efficiency.
The base is made of cast iron. The flanges and base are cast in one piece. The discharge side of
the base has a combined drain plug and bypass valve. The pump is secured to the foundation by
four bolts through the base plate.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN
standards. The motor is flange-mounted with tapped-hole flange (FT).
Motor mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).
Electrical tolerances comply with IEC 60034.
The motor has built-in thermal protection (PTO current and temperature sensors) in accordance with
IEC 60034-11 and requires no further motor protection. The protection reacts to both slow- and
quick-rising temperatures, e.g. constant overload and stalled conditions.
As the thermal protection incorporates automatic reset, the motor must be connected in a way which
ensures that the automatic reset cannot cause accidents.
Technical data
Liquid:
Pumped liquid: Water
Liquid temperature range: 253 .. 393 K
Liquid temp: 293 K
Density: 998.2 kg/m
2/8
Printed from Grundfos CAPS [2013.03.059]
Company name: Lenntech BV - lenntech.com
Created by: [email protected]
Phone: +31 15 2610900
Fax: +31 15 2616289
Date: -
Position Qty. Description
Technical:
Speed for pump data: 2789 rpm
Rated flow: 1.8 m/h
Rated head: 85 m
Shaft seal: HQQE
Approvals on nameplate: CE,TR
Curve tolerance: ISO 9906:1999 Annex A
Materials:
Pump housing: Cast iron
EN-JL1030
ASTM A48-30 B
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Maximum ambient temperature: 313 K
Max pressure at stated temp: 25 bar / 120 C
25 bar / -20 C
Flange standard: DIN
Pipe connection: DN 25 / DN 32
Pressure stage: PN 16 / PN 25
Flange size for motor: FT115
Electrical data:
Motor type: 90SB
IE Efficiency class: NA
Number of poles: 2
Rated power - P2: 1.1 kW
Power (P2) required by pump: 1.1 kW
1.1 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 220-230/240 V
Rated current: 7,40/6,70 A
Starting current: 390 %
Cos phi - power factor: 0,98/0,99
Rated speed: 2770 rpm
Motor efficiency at full load: 73-71 %
Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)
Insulation class (IEC 85): F
Others:
Minimum efficiency index, MEI : 0.7
Net weight: 39.4 kg
Gross weight: 42.3 kg
Shipping volume: 0.08 m3
3/8
Printed from Grundfos CAPS [2013.03.059]
Company name: Lenntech BV - lenntech.com
Created by: [email protected]
Phone: +31 15 2610900
Fax: +31 15 2616289
Date: -
96537602 CR 1-19 50 Hz
H CR 1-19, 1*230 V, 50Hz eta
[m] [%]
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m
120
110
100
90 90
80 80
70 70
60 60
50 50
40 40
30 30
20 20
10 10
0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 Q [m/h]
P NPSH
[kW] [m]
1.4 7
P1
1.2 6
1.0 5
0.8 P2 4
0.6 3
0.4 2
0.2 1
0.0 0
4/8
Printed from Grundfos CAPS [2013.03.059]
Company name: Lenntech BV - lenntech.com
Created by: [email protected]
Phone: +31 15 2610900
Fax: +31 15 2616289
Date: -
Description Value H CR 1-19, 1*230 V, 50Hz eta
[m] [%]
Pumped liquid = Water
Product name: CR 1-19 A-FGJ-A-E-HQQE 120
Liquid temperature = 293 K
Product No: 96537602 110 Density = 998.2 kg/m
EAN number: 5700397596951 100
90 90
Technical: 80 80
Speed for pump data: 2789 rpm 70 70
Rated flow: 1.8 m/h 60 60
Rated head: 85 m 50 50
Head max: 116 m 40 40
Impellers: 19 30 30
4 x 13.5
Impeller: Stainless steel 100
89
DIN W.-Nr. 1.4301
AISI 304
35
Material code: A
180
220
19 x 24.5
Code for rubber: E
Installation: 20
G 1/2
100
141
250
G 1/2
G 1/2
Pressure stage: PN 16 / PN 25
Flange size for motor: FT115
Liquid:
Pumped liquid: Water
Liquid temperature range: 253 .. 393 K
Liquid temp: 293 K
Density: 998.2 kg/m
Electrical data:
Motor type: 90SB
IE Efficiency class: NA
Number of poles: 2
Rated power - P2: 1.1 kW
Power (P2) required by pump: 1.1 kW
1.1 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 220-230/240 V
Rated current: 7,40/6,70 A
Starting current: 390 %
Cos phi - power factor: 0,98/0,99
Rated speed: 2770 rpm
Motor efficiency at full load: 73-71 %
Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)
Insulation class (IEC 85): F
Motor protec: PTO
Motor No: 85215705
Others:
5/8
Printed from Grundfos CAPS [2013.03.059]
Company name: Lenntech BV - lenntech.com
Created by: [email protected]
Phone: +31 15 2610900
Fax: +31 15 2616289
Date: -
Description Value
Minimum efficiency index, MEI : 0.7
Net weight: 39.4 kg
Gross weight: 42.3 kg
Shipping volume: 0.08 m3
6/8
Printed from Grundfos CAPS [2013.03.059]
Company name: Lenntech BV - lenntech.com
Created by: [email protected]
Phone: +31 15 2610900
Fax: +31 15 2616289
Date: -
96537602 CR 1-19 50 Hz
139
178
281
G 1/2 G 1/2
589
G 1/2 19 x 24.5
100
140
89
75
20
100 35 4 x 13.5
141 180
250 220
7/8
Printed from Grundfos CAPS [2013.03.059]
Company name: Lenntech BV - lenntech.com
Created by: [email protected]
Phone: +31 15 2610900
Fax: +31 15 2616289
Date: -
96537602 CR 1-19 50 Hz
8/8
Printed from Grundfos CAPS [2013.03.059]
Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.