Proximity Transducers, Seismic Sensors and Accessories

ProvibTechs Case Mount Sensors Selection Guide

Model Number TM0782A TM0784B TM0793V TM079VD
TM0783A
TM0786A
Low
General Purpose Low Power Velocity Transducer Frequency
Accelerometer Accelerometer Velocity/
Displacement
Sensitivity 40
mV/mm/sec
100 mV/g 100 mV/g 4.0 mV/mm/sec
4.0mV/um
(p-p)
Frequency Response 0.5 - 10KHz 1.0 - 10KHz 2.0 - 7KHz 0.5 - 20 Hz
Temperature o
o o -50 C to o o o o
-50 C to 120 C o -50 C to 120 C -20 C to 70 C
120 C
Environmental Rating IP67 IP67 IP67 IP67
Connection TM0782A:
Mil 2 pin; Special 2-pin
Mil 2 Pin Mil 2 pin
TM0783A: connector
Integral cable
Maximum Transmission
300m 300m 300m 100m
Distance
Constant Current 2 - 10mA
3 - 10mA 3 - 10mA 3-10mA
(3-10mA for TM0786A)
Power Supply 18 - 30VDC 9 - 30VDC 18 - 30VDC 18 - 30VDC
Bias Voltage 10 - 14VDC 6VDC 10 - 14VDC 10 - 14VDC
Connector Direction TM0782A/ 0783A:Top; TM0793V: Top
Top
TM0786A:Side
Intrinsically Safe
TM0782A/0786A: ATEX: II 1 G,Ex ia IIC
ATEX: II 1 G, Ex iaIICT4; T4;
CSA: Class l, Div. 1, CSA: Class 1, Div. 1,
groups A,B,C&D; groups A,B,C&D;
PCEC: Ex ia IIC T4 PCEC: Ex ia IIC T4
GOST R: 0ExiallCT4X GOST R:
0ExiallCT4X

CE
Warranty

2 years

ProvibTech Phone: +1-713-830-7601 Fax: +1-281-754-4972 [email protected] www.provibtech.com

17
 Proximity Transducers, Seismic Sensors and Accessories

Accelerometer TM0782A

General Purpose, Industrial Piezoelectric

Accelerometers
The TM0782A-K accelerometer kit consists of one
accelerometer and one 5 meter cable. This accelerometer
kit directly interfaces with ProvibTechs signal conditioners:
DTM, TR transmitters, DM Dual Monitors and PT580
vibration switches to measure case vibration in acceleration
or velocity.

Specifications

Electrical
Sensitivity: 100mV/g, @ 25oC, 10%
Frequency Response: 0.5 - 10,000Hz (3dB)
Acceleration Range: 50g Resonance Frequency: 30 kHz
Isolation: Fully isolated Maximum Transmission Distance:
Electrical Noise: 0.0007g 300 meters (1,000 feet)
Power Requirement: 2 - 10mA constant current
18 - 30VDC Environmental and Physical
Bias Voltage: 10 - 14VDC Temperature Range: -50oC to +120oC
Environmental Protection: IP67
Weight: 90 grams
Case Material: Stainless Steel
Mounting: 1/4-28UNF tapped hole
Installation Torque: 29N x M
Hazardous Area Approval:
2-pin connector
ATEX: II 1 G Ex ia IIC T4
CSA: Class l, Div. 1, Groups A, B, C and D
I.S. Class I, Div. 1, Group A,B,C,D and T4,
Ex ia IIC T4
CSA: Class I, Div.2, Groups A, B, C, D
Non- Incendive
52.5 (2.07")

PCEC: Ex ia IIC T4
TR CU: 0Ex ia IIC T4 X
RU C-US.05..00477
NANIO CCVE

1/4 -28" Connection

A: Power (red)
1/4-28"
B: COM (white)
M 6 or 1 /4-28" Shield

25.4(1")

ProvibTech Phone: +1-713-830-7601 Fax: +1-281-754-4972 [email protected] www.provibtech.com

18
 Proximity Transducers, Seismic Sensors and Accessories

Order Information TM0782A-M-S

Accelerometer with mounting screw 1/4-28 to M61
Hazardous area approval
TM0782A-M
Accelerometer with mounting screw 1/4-28 to M61
TM0782A-E-S
Accelerometer with mounting screw 1/4-28 to 1/4-28
TM0782A-E Hazardous area approval
Accelerometer with mounting screw 1/4-28 to 1/4-28

TM0782A-K-M
Accelerometer kit includes:
9 TM0782A accelerometer
9 Mounting screw (1/4-28 to M61)
9 TM0702-05

TM0782A-K-E
Accelerometer kit includes:
9 TM0782A accelerometer
.
9 Mounting screw (1/4-28 to 1/4-28)
9 TM0702-05

Accessories:

(Standard cable length is 5 meters. XX = 05)

TM0702-XX: Aluminum MIL connector with XX meters cable, 6.35mm diameter.

o o
Operating temperature range goes up to 120 C (250 F)

TM0703-XX: Seal tight boot connector with XX meters cable, 6.35mm diameter.
o o
Operating temperature range goes up to 120 C (250 F)

TM0704-XX: Stainless steel MIL connector with armored XX meters cable,

o o
4.83mm diameter. Operating temperature range goes up to 150 C (300 F), Maximum
Length is 10 meters.
TM0704-XX-F: Stainless steel MIL connector with armor with FEP jacket XX
meters cable.

TM0705-XX: Cornered MIL connector with armored XX meters cable, 4.83mm

o o
diameter. Operating temperature range goes up to 120 C (250 F) , Maximum Length
is 10 meters
TM0705-XX-F: Cornered MIL connector with Armor with FEP jacket XX meters
cable.

TM0710: Mounting screw 1/4-28 - M61

TM0711: Mounting screw 1/4-28 - 1/4-28
TM0712: Mounting screw 1/4-28 - M8
TM0713: Mounting screw 1/4-28 - M10

ProvibTech Phone: +1-713-830-7601 Fax: +1-281-754-4972 [email protected] www.provibtech.com

19
 Proximity Transducers, Seismic Sensors and Accessories

Accelerometer with Integral Cable TM0783A

General Purpose, Industrial Piezoelectric Resonance Frequency: 30 kHz

Accelerometers Maximum Transmission Distance:
300 meters (1,000 feet)
The TM0783A accelerometer kit consists of one
accelerometer and one 3 meter cable. This accelerometer Environmental and Physical
kit directly interfaces with ProvibTechs signal conditioners: Temperature Range: -50oC to +120oC
DTM, TR Transmitters, DM dual monitors and PT580 Environmental Protection: IP67
vibration switches to measure case vibration in acceleration Weight: 90 grams
or velocity. Case Material: Stainless steel
Mounting: 1/4-28UNF tapped hole
Specifications Installation Torque: 29N x M
Electrical
Sensitivity: 100mV/g, @ 25oC, 10% Connection
A: Power (red)
Frequency Response: 0.5 - 10,000Hz (3dB)
B: COM (white)
Acceleration Range: 50g Shield
Isolation: Fully isolated
Electrical Noise: 0.0007g Order Information
Power Requirement: 2 - 10mA constant current
TM0783A-M
18 - 30VDC
Accelerometer Includes:
Bias Voltage: 10 - 14VDC 9 Accelerometer
9 Mounting screw (1/4-28 to M61)
9 3m cable
38(1.5")
TM0783A-E
Accelerometer Includes:
9 Accelerometer
9 Mounting screw (1/4-28 to 1/4-28)
9 3m cable

Accessories

76(3.0") TM0710: Mounting screw 1/4-28 - M61

TM0711: Mounting screw 1/4-28 - 1/4-28
TM0712: Mounting screw 1/4-28 - M8
TM0713: Mounting screw 1/4-28 - M10
36(1.42")

1/4-28"
1/4-28"

M6 or 1/4-28"

21(0.83")

ProvibTech Phone: +1-713-830-7601 Fax: +1-281-754-4972 [email protected] www.provibtech.com

20
 Proximity Transducers, Seismic Sensors and Accessories

Low Power Accelerometer TM0784B

General Purpose Portable Meter Accelerometers Mounting: 1/4-28UNF tapped

hole
The TM0784B is ideal for battery powered portable meter
applications which require measuring vibration with a
lower power supply voltage.

Specifications
Electrical
Sensitivity: 100mV/g, @ 25oC, 10%
Frequency Response: 1.0 - 10,000Hz (3dB)
Acceleration Range: 10g
Isolation: Fully isolated
Electrical Noise: 0.0007g Installation Torque: 29N x M
Power Requirement: 3 - 10mA constant current
9 - 30VDC
Nominal Bias Voltage: 6.0 VDC I

Resonance Frequency: 20 KHz

Maximum Transmission Distance: Order Information
300 meters (1,000 feet)

TM0784B-K
Environmental and Physical
Accelerometer kit includes:
9 TM0784B Accelerometer
Temperature Range: -50oC to +120oC
Environmental Protection: IP67 Accessories

PT600-TP: accelerometer tip, 50mm

Weight: 90 grams
PT600-MG: magnet for accelerometer
Case Material: Stainless steel

ProvibTech Phone: +1-713-830-7601 Fax: +1-281-754-4972 [email protected] www.provibtech.com

21
 Proximity Transducers, Seismic Sensors and Accessories

Side-Exit Accelerometer TM0786A

The TM0786A accelerometer is a side-exit connector and

multi-purpose accelerometer.

Specifications

Electrical
Sensitivity: 100mV/g, @ 25oC, 10%
Frequency Response: 1 - 10,000Hz (3dB)
Dynamic Range: 50g
Isolation: Fully isolated Environmental and Physical
Electrical Noise: 0.0007g
Power Requirement: 3 - 10mA constant current Temperature Range: -50oC to +120oC
18 - 30VDC Environmental Protection: IP67
Bias Voltage: 10 - 14VDC Weight: 200 grams
Resonance Frequency: 15 kHz Case Material: 304 Stainless steel
Maximum Transmission Distance: Sealing: Hermetically welded
300 meters (1,000 feet) Mounting: 1/4-28UNF or M61 screw
Installation Torque: 29N x M
Connector: MIL-C connector
Hazardous Area Approvals:
ATEX: II 1 G Ex ia IIC T4
CSA: I.S. Class I, Div. 1, Group A,B,C,D and T4,
Ex ia IIC T4
Class I, Div.2, Groups A, B, C, D
Non- Incendive

PCEC: Ex ia IIC T4
TR CU: 0Ex ia IIC T4 X
M6 x 1 or 1/4-28"UNF screw RU C-US.05..00477
NANIO CCVE

Order Information
A B

TM0786A-M
Side-exit accelerometer with metric mounting screw
9 TM0786A accelerometer
9 Mounting screw M61

TM0786A-E
Side-exit accelerometer with English mounting screw
9 TM0786A accelerometer
9 Mounting screw 1/4-28

ProvibTech Phone: +1-713-830-7601 Fax: +1-281-754-4972 [email protected] www.provibtech.com

22
 Proximity Transducers, Seismic Sensors and Accessories

TM0786A-E-S
TM0786A-M-S Side-exit accelerometer with English mounting screw
Side-exit accelerometer with metric mounting screw 9 TM0786A accelerometer
9 TM0786A accelerometer 9 Mounting screw 1/4-28
9 Mounting screw M61 9 Hazardous area approval
9 Hazardous area approval

Accessories:

TM0714: Mounting screw M61

TM0715: Mounting screw 1/4-28

(Standard cable length is 5 meters. XX = 05)

TM0702-XX: Aluminum MIL connector with XX meters cable, 6.35mm diameter.

o o
Operating temperature range goes up to 120 C (250 F)

TM0703-XX: Seal tight boot connector with XX meters cable, 6.35mm diameter.
o o
Operating temperature range goes up to 120 C (250 F)

TM0704-XX: Stainless steel MIL connector with Armored XX meters cable,

4.83mm diameter. Operating temperature range goes up to 150oC (300oF) , Maximum
Length is 10 meters.
TM0704-XX-F: Stainless steel MIL connector with Armor with FEP jacket XX meters
cable.

TM0705-XX: Cornered MIL connector with armored XX meters cable, 4.83mm

diameter.
Operating temperature range goes up to 120oC (250oF) , Maximum Length is 10 meters.
TM0705-XX-F: Cornered MIL connector with Armor with FEP jacket XX meters cable.

ProvibTech Phone: +1-713-830-7601 Fax: +1-281-754-4972 [email protected] www.provibtech.com

23
 Proximity Transducers, Seismic Sensors and Accessories

Velocity Transducer TM0793V

Piezoelectric Velocity Transducer
The TM0793V-K velocity transducer kit consists of one
velocity transducer and one 5 meter cable. This velocity
transducer kit directly interfaces with ProvibTechs signal
conditioners: DTM, TR transmitters, DM dual monitors and
PT580 vibration switches to measure case vibration in
velocity or displacement.

Specifications
Electrical
Sensitivity: 4.0mV/mm/sec (100mV/in/sec),
@ 25oC, 10%
Velocity Range: 5.0V pk
Amplitude Nonlinearity: 1%
Frequency Response: 2 - 7,000Hz (3dB)
Isolation: Fully isolated
Power Requirement:
Transverse Sensitivity: < 5% or axial
3 - 10mA constant current
18 - 30VDC
Resonance Frequency: 15 kHz
Bias Voltage: 10 - 14VDC
Maximum Transmission Distance:
300 meters (1,000 feet)

2-pin connector Environmental and Physical

Temperature Range: -50oC to +120oC
Environmental Protection: IP67
Weight: 250 grams
Case Material: Stainless steel
61.5(2.42") Mounting: 1/4-28UNF tapped hole
Hazardous Area Approvals:
ATEX: II 1 G Ex ia IIC T4;
CSA: I.S. Class l, Div. 1, Groups A, B, C & D
Exia IIC T4
Class I, Div.2, Groups A, B, C, D
1/4-28"
Non- Incendive
1/4-28"
PCEC: Ex ia IIC T4X
M6/ 1/4-28" TR CU: 0Ex ia IIC T4 X
RU C-US.05..00477
25.4(1") NANIO CCVE

Connection
A: Power (red)

ProvibTech Phone: +1-713-830-7601 Fax: +1-281-754-4972 [email protected] www.provibtech.com

24
 Proximity Transducers, Seismic Sensors and Accessories

B: COM (white) TM0793V-M-S

Velocity sensor with mounting screw 1/4-28 to M61
Order Information Hazardous area approval

TM0793V-E-S
TM0793V-M Velocity sensor with mounting screw 1/4-28 to 1/4-28
Velocity sensor with mounting screw 1/4-28 to M61 Hazardous area approval

TM0793V-E
Velocity sensor with mounting screw 1/4-28 to 1/4-28

TM0793V-K-M
Velocity sensor kit includes:
9 TM0793V velocity sensor
9 Mounting screw (1/4-28 to M61)
9 TM0702-05

TM0793V-K-E
Velocity sensor kit includes:
9 TM0793V velocity sensor
9 Mounting screw (1/4-28 to 1/4-28)
9 TM0702-05
Accessories:

(Standard cable length is 5 meters. XX = 05)

TM0702-XX: Aluminum MIL connector with XX meters cable, 6.35mm diameter.

o o
Operating temperature range goes up to 120 C (250 F)

TM0703-XX: Seal tight boot connector with XX meters cable, 6.35mm diameter.
o o
Operating temperature range goes up to 120 C (250 F)

TM0704-XX: Stainless steel MIL connector with armored XX meters cable,

4.83mm diameter. Operating temperature range goes up to 150oC (300oF) ,
Maximum Length is 10 meters.
TM0704-XX-F: Stainless steel MIL connector with Armor with FEP jacket XX
meters cable.
TM0705-XX: Cornered MIL connector with armored XX meters cable, 4.83mm
o o
diameter. Operating temperature range goes up to 120 C (250 F) , Maximum Length
is 10 meters.
TM0705-XX-F: Cornered MIL connector with Armor with FEP jacket XX meters
cable.

TM0710: Mounting screw 1/4-28 - M61

TM0711: Mounting screw 1/4-28 - 1/4-28
TM0712: Mounting screw 1/4-28 - M8

ProvibTech Phone: +1-713-830-7601 Fax: +1-281-754-4972 [email protected] www.provibtech.com

25
 Proximity Transducers, Seismic Sensors and Accessories

TM0713: Mounting screw 1/4-28 - M10

Low Frequency Velocity/Displacement Sensor TM079VD

The TM079VD is specially designed to measure low Isolation: Fully isolated

frequency vibration. The TM079VD output is in velocity or
displacement.

Features

9 Measures frequency down to 30 rpms in velocity

9 IEPE power used with most accelerometer receivers
9 Stainless steel hermetically sealed case
Power Requirement: 3 - 10mA constant current
9 Ideal for low speed machines (hydro turbines, cooling
18 - 30VDC
towers, fin-fans and wind-turbines)
Output Impedance: 50
9 Large signal output, high signal/noise ratio
Output Bias Voltage: 10 - 14VDC
Maximum Transmission Distance:
Specifications 300 meters (1,000 feet)

Electrical Environmental and Physicals

Sensitivity: Temperature Range: -20oC to +70oC
Velocity: Environmental Protection: IP67
40 mV/mm/s (1000mV/in/sec), pk, @ 25oC, 10% Weight: 1,400 grams
Maximum Amplitude: Case Material: 304 stainless steel
Velocity: 100 mm/s pk Mounting: 3/4 NPT or M20
Frequency Response: 0.5 - 20 Hz (3dB) Mounting Torque: 29N x M

Connection
A: Power (red)
B: COM (white)
Order Information
TM079VD

TM079VD-V-AX-BX
Vertical mounting low frequency sensor

TM079VD-H-AX-BX
Horizontal mounting low frequency sensor

AX: Sensitivity
A0: Velocity: 40 mV/mm/s (1000mV/in/sec), pk
A1: Displacement: 4.0mV/m (100mV/mil), pkpk
BX: Mounting Stud
B0: 3/4 NPT
B1: M201.5

ProvibTech Phone: +1-713-830-7601 Fax: +1-281-754-4972 [email protected] www.provibtech.com

26
 Proximity Transducers, Seismic Sensors and Accessories

Accessories

TM0716: Mounting screw M201.5

TM0717: Mounting screw 3/4 NPT

(Standard cable length is 5 meters. XX = 05)

TM0702-XX: Aluminum MIL connector with XX meters cable, 6.35mm diameter.

Operating temperature range goes up to 120oC (250oF)

TM0703-XX: Seal tight boot connector with XX meters cable, 6.35mm diameter.
o o
Operating temperature range goes up to 120 C (250 F)

TM0704-XX: Stainless steel MIL connector with armored XX meters cable,

4.83mm diameter. Operating temperature range goes up to 150oC (300oF), Maximum
Length is 10 meters.
TM0704-XX-F: Stainless steel MIL connector with Armor with FEP jacket XX meters
cable.

TM0705-XX: Cornered MIL connector with armored XX meters cable, 4.83mm diameter.
Operating temperature range goes up to 120oC (250oF), Maximum Length is 10 meters.
TM0705-XX-F: Cornered MIL connector with Armor with FEP jacket XX meters cable.

ProvibTech Phone: +1-713-830-7601 Fax: +1-281-754-4972 [email protected] www.provibtech.com

27