Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    Equivalent Lateral Force Procedure: Seismic Design

    Uploaded by

    crdavalos
    This document outlines the equivalent lateral force procedure for seismic design of a structure with a maximum height of 16.5 feet located in Site Class D. Given the site class and mapped spectral accelerations, the design parameters SDS, SD1, Cs, and the minimum base shear V are calculated. The total seismic weight Ws is 1027 lbs, resulting in a required base shear of 80 lbs. Tables from ASCE 7-10 are referenced to determine the appropriate values for Fa and Fv based on the site class and mapped spectral accelerations.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Equivalent Lateral Force Procedure: Seismic Design

    Uploaded by

    crdavalos
    27 views5 pages
    This document outlines the equivalent lateral force procedure for seismic design of a structure with a maximum height of 16.5 feet located in Site Class D. Given the site class and mapped spectral accelerations, the design parameters SDS, SD1, Cs, and the minimum base shear V are calculated. The total seismic weight Ws is 1027 lbs, resulting in a required base shear of 80 lbs. Tables from ASCE 7-10 are referenced to determine the appropriate values for Fa and Fv based on the site class and mapped spectral accelerations.

    Original Description:

    seismic analisys

    Original Title

    Seismic

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the equivalent lateral force procedure for seismic design of a structure with a maximum height of 16.5 feet located in Site Class D. Given the site class and mapped spectral accelerations, the design parameters SDS, SD1, Cs, and the minimum base shear V are calculated. The total seismic weight Ws is 1027 lbs, resulting in a required base shear of 80 lbs. Tables from ASCE 7-10 are referenced to determine the appropriate values for Fa and Fv based on the site class and mapped spectral accelerations.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    27 views5 pages

    Equivalent Lateral Force Procedure: Seismic Design

    Uploaded by

    crdavalos
    This document outlines the equivalent lateral force procedure for seismic design of a structure with a maximum height of 16.5 feet located in Site Class D. Given the site class and mapped spectral accelerations, the design parameters SDS, SD1, Cs, and the minimum base shear V are calculated. The total seismic weight Ws is 1027 lbs, resulting in a required base shear of 80 lbs. Tables from ASCE 7-10 are referenced to determine the appropriate values for Fa and Fv based on the site class and mapped spectral accelerations.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 5

    SEISMIC DESIGN

    EQUIVALENT LATERAL FORCE PROCEDURE

    Max. Height = 16.50 FT

    Ss = 0.218 S1 = 0.083 Site Class = D

    Fa = 1.600 Fv = 2.400

    SDS = 2/3(Fa)Ss = 0.233 SD1 = 2/3(Fv)S1 = 0.133

    Risk Category = II SEISMIC DESIGN CATEGORY = C

    T = 0.02 * h (3/4) = 0.164


    SDS R= 3.00 (ASCE 7- Table 12.2-1)
    Cs =
    R/I Ie = 1.00 (ASCE 7- Sec. 11.5.1 Table 1.5-2)

    Cs = 0.078 << CONTROLS

    SD1
    Cs, MAX =
    T (R / I) Cs, MAX = 0.271

    Cs, MIN = 0.01 Cs, MIN = 0.010

    SEISMIC BASE SHEAR, V = Cs Ws

    LOADS
    W s1 = 1027 LBS
    W s2 = 0 LBS

    Ws = 1027 LBS VBASE = 80 LBS


    SITE CLASE D
    Ss 0.218
    S1 0.083

    Fa 1.60
    Fv 2.40

    ASCE 7-10 Table 11.4-1, Page 66


    Values of Fa a function of a site class and mapped
    Short-Period Spectral Response Acceleration SS
    D 1.60 1.40 1.20 1.10 1.00
    1.60
    Mapped Spectral Acceleration at Short Period SS
    SITE CLA SS < 0.25 SS < 0.50 SS < 0.75 SS < 1.00 SS < 1.25
    A 0.8 0.8 0.8 0.8 0.8
    B 1.0 1.0 1.0 1.0 1.0
    C 1.2 1.2 1.1 1.0 1.0
    D 1.6 1.4 1.2 1.1 1.0
    E 2.5 1.7 1.2 0.9 *
    F * * * * *
    * Site-specific geotechnical investigation and dynamic site response analysis should be performed

    ASCE 7-10 Table 11.4-2, Page 66


    Values of Fv a function of a site class and mapped
    Short-Period Spectral Response Acceleration S1
    D 2.40 2.00 1.80 1.60 1.50
    2.40
    Mapped Spectral Acceleration at Short Period S1
    SITE CLA S1 < 0.10 S1 < 0.20 S1 < 0.30 S1 < 0.40 S1 < 0.50
    A 0.8 0.8 0.8 0.8 0.8
    B 1.0 1.0 1.0 1.0 1.0
    C 1.7 1.6 1.5 1.4 1.3
    D 2.4 2.0 1.8 1.6 1.5
    E 3.5 3.2 2.8 2.4 2.4
    F * * * * *
    * Site-specific geotechnical investigation and dynamic site response analysis should be performed
    alysis should be performed
    alysis should be performed

    You might also like