YST-SW315: Subwoofer System
YST-SW315: Subwoofer System
YST-SW315: Subwoofer System
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA
Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry,
and more specifically YAMAHA Products, are already known and
understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety
procedures when servicing this product may result in
personal injury, destruction of expensive components,
YST-SW315
and failure of the product to perform as specified. For
these reasons, we advise all YAMAHA product owners
that any service required should be performed by an
authorized YAMAHA Retailer or the appointed service
representative.
IMPORTANT: The presentation or sale of this manual to any individual
or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or
establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s)
indicated on the cover. The research, engineering, and service departments
of YAMAHA are continually striving to improve YAMAHA products.
Modifications are, therefore, inevitable and specifications are subject to
change without notice or obligation to retrofit. Should any discrepancy
appear to exist, please contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components.
Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in
the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part
replacement. Recheck all work before you apply power
to the unit.
CONTENTS
TO SERVICE PERSONNEL .......................................... 2 ADJUSTMENTS / ............................................ 8~10
SPECIFICATIONS / ........................................ 3 PRINTED CIRCUIT BOARD .................................. 11~12
INTERNAL VIEW ........................................................... 3 SCHEMATIC DIAGRAM .............................................. 13
BLOCK DIAGRAM ......................................................... 4 PARTS LIST ........................................................... 15~23
REAR PANELS .......................................................... 4~5
DISASSEMBLY PROCEDURES / ............. 6~7
100855
P.O.Box 1, Hamamatsu, Japan
YST-SW315
AC LEAKAGE
TO SERVICE PERSONNEL WALL EQUIPMENT TESTER OR
1. Critical Components Information
OUTLET UNDER TEST EQUIVALENT
Components having special characteristics are marked s
and must be replaced with parts having specifications equal
to those originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify INSULATING
that all exposed conductive surfaces are properly insulated TABLE
from supply circuits.
Meter impedance should be equivalent to 1500 ohm shunted Leakage current must not exceed 0.5mA.
by 0.15F. Be sure to test for leakage with the AC plug in both polarities.
CAUTION
F1: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 6A, 125V FUSE.
CAUTION
F1: REPLACE WITH SAME TYPE 6A, 125V FUSE.
ATTENTION
F1: UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE DE 6A, 125V.
electrical/electronic and /or plastic (where applicable) components may also contain traces of chemicals found by the
California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive
harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA-
SON WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
Caution:
1. As the melting point temperature of the lead-free solder 30
is about 30C to 40C (50F to 70F) higher than that of 40
the lead solder, be sure to use a soldering iron suitable
to each solder.
2. If lead solder must be used, be sure to remove lead-
free solder from each terminal section of the parts to be
replaced and from the area around it completely before
soldering, or make sure that the lead-free solder and
lead solder melt together fully.
2
YST-SW315
SPECIFICATIONS /
Type / ................. Advanced Yamaha Active Servo Technology Weight / ................................................... 19 kg (41 lbs. 14 oz.)
Output Power / .................... 250 W (100 Hz, 5 , 10% T.H.D.) Finish
Input Sensitivity / Cherry Color ............................... U, C, A, B, G, R, T, K, J models
INPUT1 (SP) ............................... 1 V (50 Hz, 250 W / 5 , L + R) Black Color ...................................... U, C, A, B, G, R, T, J models
INPUT2 (PJ) ........................... 50 mV (50 Hz, 250 W / 5 , L + R) Accessories /
Input Impedance / Subwoofer Cable (3 m) x 1 (J model), Speaker cable (4 m) x 2 (J
INPUT1 (SP) ....................................................................... 2.2 k model), Nonskid Pad x 4
INPUT2 (PJ) ......................................................................... 12 k
Frequency Response / ................. 20 Hz to 160 Hz * Specifications are subject to change without notice due to product
improvements.
Driver / ...... 10" (25 cm) cone, Magnetic Shielding Type
Input Section /
INPUT1 .............................................................. Speaker Terminal U .......... U.S.A. model C ...... Canadian model
INPUT2 .................................................................... RCA Pin Jack A .......... Australian model B ...... British model
Operation Section / G .......... European model R ...... General model
T .......... Chinese model K ...... Korean model
Front Panel ....... STANDBY/ON Switch, B.A.S.S. Switch, Volume J ........... Japanese model
Control, High Cut Control, LED Indicator
Rear Panel ....... Power Switch, Auto Standby Switch (HIGH /
LOW / OFF), Phase Switch (NORM / REV), DIMENSIONS /
Voltage Selector (R, T, K models only)
350(13-3/4") 382(15-7/16") 27
Power Supply /
355(14") (1-1/16")
U, C models ........................................................ AC 120 V, 60 Hz
A model ............................................................... AC 240 V, 50 Hz
B, G models ........................................................ AC 230 V, 50 Hz
350(13-3/4")
YST-SW315
R, T, K models ................... AC 240 / 220 / 120 / 110 V, 50/60 Hz
430(16-15/16")
J model .......................................................... AC 100 V, 50/60 Hz
Power Consumption /
U, C, A, B, G, R, T, K models ............................................... 80 W
J model ................................................................................ 100 W
Standby Power Consumption / ................... 0.5 W
(3-1/8")
Dimension / (W x H x D) ................... 350 x 430 x 382 mm
80
(13-3/4" x 16-15/16" x 15-1/16")
Unit: mm (inch)
mm
INTERNAL VIEW
1 2 3 4 5 6
7 8 9 0
3
YST-SW315
BLOCK DIAGRAM
+ VR1 +B
SW1 PRE DRIVE
PHASE VOLUME Q210 POWER DRIVE
L IC11A SELECT
Q1C, 17C, 24A DRIVER
Q28, 29 Q16A/C, 26A/C PS AMP Q27, 31
3 IC11B IC10A B.P.F.
1 6 7 IC7A RY1
7 8 6 IC7B Q201204
5 6 + 8 4 IC10B
2 7 + 2 4
INPUT 1 3 + 2
3
+
L.P.F. L.P.F. H.P.F. Q1A, 17A, 24C
12dB/oct PS AMP
R 6dB/oct 12dB/oct B.A.S.S. Q30, 32
SELECT
+ SW3 B
L
LIMITER
Q1821
D6, 14, 33, 34
OUTPUT
8
OFF
R 4
L TIMER 3 Q37, 38 IC3
+ R252
IC201 D36 Q22, 23
H 6
PROTECTION
AUTO STANDBY 7
SW2 POWER SUPPLY
MUSIC + D1
L SENSOR C227
OFF IC4 +B
INPUT 2 Q205
L
R
H AUTO POWER
ON/OFF CIRCUIT B
REGULATOR
SW5
12 IC1
Q209
SUB
YST-SW315
POWER SUPPLY
D11
T1
REGULATOR REGULATOR
IC202 Q207, 208
STANDBY/ON D203
D9 D202
SW4
(R, T, K models only)
D201
Q206
REAR PANELS
U, C models A model
4
YST-SW315
B, G models R model
T model K model
YST-SW315
J model
5
YST-SW315
DISASSEMBLY PROCEDURE /
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet. AC
1. Removal of Driver 1.
a. Remove 4 screws (1) and then remove the Base. (Fig. 1) a. 4Fig. 1
b. Remove 4 screws (2) and then remove the Driver. b. 4
(Fig. 1) Fig. 1
c. Disconnect the connector connected to the terminal of c.
the Driver. (Fig. 1) Fig. 1
1 1
Base
2 2 Connector
YST-SW315
Driver
Fig. 1
Fig. 2
6
YST-SW315
to CB4
to CB9
4
to CB10
YST-SW315
Cover 5
4
Fig. 3
Note:
Replace this Bush (V7324600) with the new
article when remove the Rear Panel Ass'y.
Ass'y
V7324600
Fig. 4
7
YST-SW315
ADJUSTMENTS /
Confirmation of Power Amp operation
For the power amplifier which has been repaired, it is
absolutely necessary to confirm that a correct A B
waveform is obtained at points indicated by andA B
in
the schematic diagram according to the following
procedure.
Devices required
Signal generator
8 or 6 load resistor 86
Oscilloscope (dual trace type) 2
Connection
1) Connect the output signal from the signal generator to 1
the input terminal of the unit. 2
2) Disconnect the connector terminal connected to the
speaker unit and reconnect it to the load resistor. 3CH1HOT
3) Connect the HOT side of the oscilloscope CH1 probe to ABGNDGND
the point A or B indicated in the figure and the GND side
to the GND of the main unit. 4CH2HOT
4) Connect the oscilloscope CH2 input to the red side of
the connector cable, which is connected with the load CH2GND
YST-SW315
resistor.
At this time, the GND terminal of CH2 must be left
unconnected.
Setting
1) Set the signal generator to the sine wave, 100 Hz and 1100 Hz
minimum output level settings.
2) Set the volume of the unit to the minimum position. 2
3) Turn on the power to the unit. 3
4) Adjust the output level of the signal generator and the 4
volume of the unit so that the output level observed at CH2
oscilloscope CH2 is 28 Vp-p. 28 Vp-p
Waveform observation
With the settings made as described above, observe CH1
the waveform obtained at CH1 for judgment.
Normal
Point A (Cathode of D29) AD29
V : 20V/div H : 2 msec/div V20 V/div H2 msec/div
DC range 1 : 1 probe DC 11
Abnormal
+B or GND level +BGND
0V
Becomes constant
Normal
Point B (Anode of D31) BD31
V : 20 V/div H : 2 msec/div V20 V/div H2 msec/div
DC range 1 : 1 probe DC 11
Abnormal
0V
-B or GND level -BGND
Becomes constant
8
YST-SW315
Idling Adjustment
To stabilize operation of the amplifier, turn ON the power
with no input signal and wait for 2 to 3 minutes in non 23
loaded condition before the adjustment.
Confirm that the voltage across the terminals TP11 and TP11TP1210 mV 200 mV
TP12 is 10 mV to 200 mV.
If it exceeds 200 mV, open (cut off) R172. 200 mVR172
Confirmation
1) Set the AUTO STANDBY switch to the LOW position. 1/
YST-SW315
2) Turn on the STANDBY/ON switch. 2STANDBY/ONON
The display LED lights up (green) and its color changes LED
510LED
to red after 5 to 10 seconds.
3) Turn off the STANDBY/ON switch. 3STANDBY/ONOFF
The display LED goes off. LED
4) Set the AUTO STANDBY switch to the HIGH position. 4/
After confirmation
1) Turn off the power switch. 1
2) Disconnect the 10k resistor connected to both ends of 2R252
R252.
9
YST-SW315
Schematic Diagram /
A
DRIVER
B
YST-SW315
IDLING CURRENT DC 10 mV
ADJ to
200 mV
Test Points /
Point A Point B
D29 D31
TP11 (+)
TP12 (-)
DC 10 mV to 200 mV
MAIN (2) P.C.B.
R172
10
A B C D E F G H I J
YST-SW315
1
PRINTED CIRCUIT BOARD (Foil side)
Semiconductor Location
Ref. No. Location Ref. No. Location
D1 J6 Q1C H5
D2 J3 Q2 H3 MAIN (4) P.C.B. MAIN (2) P.C.B.
MAIN (10) P.C.B.
BASS
BASS
TOVL
TOVL
MAIN
PWS
PWS
VCC
VCC
MA2
MA1
D3 H3 Q3 H3
+V2
+V1
+V1
+12
+12
LIM
-12
-12
E
E
D4 H2 Q4 H3
D5 H3 Q5 H3
D6 F3 Q6 H3
2 D7 E6 Q7 H3
D9 I2 Q8 H3
D12 E3 Q9 G5
D13 F3 Q10 G3 MAIN (3) P.C.B.
D14 F3 Q16A F5
D15 H6 Q16C H5
TR-C
TR-E
TR-B
D19 E3 Q17A G5
D20 G2 Q17C H5
D21 F6 Q18 F2
D22 G3 Q19 F2 BE
R
D25 G3 Q22 H6 R252 BE
D26 G3 Q23 H6 add 10k
INPUT1/OUTPUT
D27 G7 Q24A G6
+B1
D28 G6 Q24C F6
-B1
E
D29 G6 Q25 F3
D30 F6 Q26A F7
DR2+
DR1+
AVST
DR1-
DR2-
OUT
D31 F6 Q26C G7
-V
D32 F6 Q27 H2 MAIN (6) P.C.B.
D33 F6 Q28 H2
D34 F3 Q29 G3
4
D36 I2 Q30 G3
L
IC1 I3 Q31 G6
IC3 H7 Q32 F6
IC4 B5 Q37 I2 MAIN (1) P.C.B.
IC6 I3 Q38 I2
IC8 E2 Q201 B7
IC11 B4 Q203 B7
IC201 B5 Q204 B7
Q1A F5 Q205 C6
5
OFF
STANDBY
AUTO
LOW
HIGH
TR-C
TR-E
TR-B
+B1
-B1
E
RE
NORM
PHASE
BASS
TOVL
PWS
MA2
MA1
BL
+V1
+12
LIM
-12
6
REV
RE
DRIVER
7
DR2+
DR1+
AVST
DR1-
DR2-
OUT
-V
11
A B C D E F G H I J
YST-SW315
1
PRINTED CIRCUIT BOARD (Foil side)
MAIN (2) P.C.B. MAIN (5) P.C.B. MAIN (4) P.C.B. MAIN (10) P.C.B. MAIN (8) P.C.B.
BASS
TOVL
MAIN
PWS
VCC
+V2
+12
-12
E
OR STANDBY/ON
LEDG
LEDR
E1
BE
2 AC POWER
LEDG
LEDR
E1
GY
OR B.A.S.S. STANDBY/ON
VOLUME HIGH CUT
GY 10 0 150Hz 50Hz MOVIE
MUSIC Semiconductor Location
WH
3 Ref. No. Location
D11 B2
D201 I2
D202 H2
D203 B2
D204 B2
VCC
+V1
IC7 G2
E
IC202 B3
MAIN (10) P.C.B. Q206 H2
Q207 B2
J, U, C, A, B, G models Q208 A2
4 Q209 B2
R, T, K models
MAIN (11) P.C.B. MAIN (7) P.C.B.
BE WH BE BE GR BR YE BL RE WH
GR
YE
RE
BR
BE BL
RE BL RE BE BL BE RE BL RE BE BL BE VOLTAGE
SELECTOR
MAIN (1) P.C.B. MAIN (10) P.C.B. MAIN (1) P.C.B. MAIN (10) P.C.B.
12
A B C D E F G H I J K L
YST-SW315
SCHEMATIC DIAGRAM
IC1: NJM79M12FA
1 Voltage Regulator
3.4
3.4
0
-1.6 POWER DRIVE PS AMP
6.0
0 PRE DRIVE 70.1
70.1
3.4 -0.1 OUTPUT
2.7 70.1 70.1
0 11.9
0 0.7 -0.1 0 70.1 70.1
0 0 69.5 4.4 69.8 70.0 69.4 69.4 69.6
0 70.1 4.4 3.8 69.6 2.7 70.1
0 69.7 69.8 69.3
69.8 69.6
67.8 2.7
0.7 1.8 1.8 3.4 2.7 INPUT
1.2
0.1
L.P.F. 1.2 1.2
3.3
70.1
2.7
2.7
0.6 2.7 0.1
IC3 : TA7317P
0 70.1 Protector
0 0 0.1
2
INPUT 2
0 0.7
8 9
0 0.1 69.9
70.1
-0.6 DRIVER
-11.8 0 Muting Constant voltage
circuit power supply circuit
PHASE 11.9
0.7 0.7
0.1 Power supply
ON/OFF
0.2 0.2 detecting circuit
1
-69.6 -69.6 Schmidt Relay drive
AUTO POWER ON / OFF CIRCUIT
5.6
5.6
7.9
Overcurrent OR circuit 6
circuit circuit
detecting circuit
5.3
-0.1
TIMER 2 Current voltage
Discharging
circuit
Substrate
-0.5 detecting circuit
7.9
3
-0.3 -2.7
-69.6 -69.6 -2.7 7 4 5
6.6
1.4
0
-1.0 -1.0 -0.1 -70.3 -3.3 0 GND
-1.6 -2.7
-68.9 -1.6 -2.7
-69.6 -3.7
-70.3 -2.7 IC4, 7, 8, 10: PC4570HA
0.1 -69.6 -69.6 -4.3 -70.7
7.9 -68.9 Dual OP-Amp
-70.3 -69.5 -3.7 -2.7 -2.3 -70.3
6.7 -70.7 -69.6
3 4.0
6.8 5.8 -69.6 -4.3
-70.4
-70.0 -70.2
-70.2 -70.3
1.4 0
4.0 0
0 -70.3 -70.3
-70.2 -70.3 1 2
- + + -
1 2 3 4 5 6 7 8 9
11.9 0 0 0
0.1 Vcc Vo1 -Vm1 +Vm1 VEE +Vm2 -Vm2 Vo2 Vcc
0 0
-0.6
0.1
-0.7
1.0
1.4
3.1
0.1
0
0
0
0 0.1 0.1
1.9 STANDBY/ON
0 0 IC6: NJM78M12FA
0.7 Voltage Regulator
B.A.S.S. 0
0 0.1 PROTECTION INPUT
0.1
0 0 0 0
7.3
7.9 24.8 1.1
-11.8
0 AC 102.4
0 11.9
-11.8
0
0 0 POWER SUPPLY
0 0
-70.3 COMMON
VOLUME 70.1
0 IC11: NJM4558L
Dual OP-Amp
A.N.I.C
0 -0.2
40 0.2 1 2 3 4 5 6 7 8
2 0 0 -1.8
-0.3
OUT1
+IN1
IN1
Vcc
+IN2
IN2
OUT2
+Vcc
3 -0.2
5 0 0 5 0
11.9 0
IC201: LB8555D
Timer
AC 27.9 POWER SUPPLY -0.1 -12.5
-12.5 -12.5 VCC 8 7 DISCHARGE
0 -11.8
THRESHOLD 6 +
-18.2 18.3 18.3 11.9 CONTROL VOLTAGE 5
R
-0.6
0 + S Q
0 -5.9
0 TRIGGER 2
3 OUTPUT
0
RESET 4
-18.2 -11.8
1
GND
6
IC202 NJM78L08A
Voltage Regulator
VIN
13.2 7.2
0
SUB POWER SUPPLY
VOUT
6.1
0.1
0.1
AC 12.4 0.1
13.2
0.8
0
6.2
x: NOT USED
O: USED / APPLICABLE
9 13
YST-SW315
PARTS LIST
ELECTRICAL PARTS
WARNING
Components having special characteristics are marked s and must be replaced with parts having specifications equal to
those originally installed.
s
YST-SW315
C.MYLAR : MYLAR FILM CAP R.FUS : FUSABLE RESISTOR
C.MYLAR.ML : MULTILAYER MYLAR FILM CAP R.MTL.CHP : CHIP METAL FILM RESISTOR
C.PAPER : PAPER CAPACITOR R.MTL.FLM : METAL FILM RESISTOR
C.PLS : POLYSTYRENE FILM CAP R.MTL.OXD : METAL OXIDE FILM RESISTOR
C.POL : POLYESTER FILM CAP R.MTL.PLAT : METAL PLATE RESISTOR
C.POLY : POLYETHYLENE FILM CAP RSNR.CE : CERAMIC RESONATOR
C.PP : POLYPROPYLENE FILM CAP RSNR.CRYS : CRYSTAL RESONATOR
C.TNTL : TANTALUM CAP R.TW.CEM : TWIN CEMENT FIXED RESISTOR
C.TNTL.CHP : CHIP TANTALUM CAP R.WW : WIRE WOUND RESISTOR
C.TRIM : TRIMMER CAP SCR.BND.HD : BIND HEAD B-TITE SCREW
CN : CONNECTOR SCR.BW.HD : BW HEAD TAPPING SCREW
CN.BS.PIN : CONNECTOR,BASE PIN SCR.CUP : CUP TITE SCREW
CN.CANNON : CONNECTOR,CANNON SCR.TERM : SCREW TERMINAL
CN.DIN : CONNECTOR,DIN SCR.TR : SCREW,TRANSISTOR
CN.FLAT : CONNECTOR,FLAT CABLE SUPRT.PCB : SUPPORT,P.C.B.
CN.POST : CONNECTOR,BASE POST SURG.PRTCT : SURGE PROTECTOR
COIL.MX.AM : COIL,AM MIX SW.TACT : TACT SWITCH
COIL.AT.FM : COIL,FM ANTENNA SW.LEAF : LEAF SWITCH
COIL.DT.FM : COIL,FM DETECT SW.LEVER : LEVER SWITCH
COIL.MX.FM : COIL,FM MIX SW.MICRO : MICRO SWITCH
COIL,OUTPT : OUTPUT COIL SW.PUSH : PUSH SWITCH
DIOD.ARRAY : DIODE ARRAY SW.RT.ENC : ROTARY ENCODER
DIODE.BRG : DIODE BRIDGE SW.RT.MTR : ROTARY SWITCH WITH MOTOR
DIODE.CHP : CHIP DIODE SW.RT : ROTARY SWITCH
DIODE.VAR : VARACTOR DIODE SW.SLIDE : SLIDE SWITCH
DIOD.Z.CHP : CHIP ZENER DIODE TERM.SP : SPEAKER TERMINAL
DIODE.ZENR : ZENER DIODE TERM.WRAP : WRAPPING TERMINAL
DSCR.CE : CERAMIC DISCRIMINATOR THRMST.CHP : CHIP THERMISTOR
FER.BEAD : FERRITE BEADS TR.CHP : CHIP TRANSISTOR
FER.CORE : FERRITE CORE TR.DGT : DIGITAL TRANSISTOR
FET.CHP : CHIP FET TR.DGT.CHP : CHIP DIGITAL TRANSISTOR
FL.DSPLY : FLUORESCENT DISPLAY TRANS : TRANSFORMER
FLTR.CE : CERAMIC FILTER TRANS.PULS : PULSE TRANSFORMER
FLTR.COMB : COMB FILTER MODULE TRANS.PWR : POWER TRANSFORMER ASSY
FLTR.LC.RF : LC FILTER,EMI TUNER.AM : TUNER PACK,AM
GND.MTL : GROUND PLATE TUNER.FM : TUNER PACK,FM
GND.TERM : GROUND TERMINAL TUNER.PK : FRONT-ENDTUNER PACK
HOLDER.FUS : FUSE HOLDER VR : ROTARY POTENTIOMETER
IC.PRTCT : IC PROTECTOR VR.MTR : POTENTIOMETER WITH MOTOR
JUMPER.CN : JUMPER CONNECTOR VR.SW : POTENTIOMETER WITH ROTARY SW
JUMPER.TST : JUMPER,TEST POINT VR.SLIDE : SLIDE POTENTIOMETER
L.DTCT : LIGHT DETECTING MODULE VR.TRIM : TRIMMER POTENTIOMETER
Note) Those parts marked with # are not included in the P.C.B. assy.
15
YST-SW315
P.C.B. MAIN
Schm
Ref. PART NO. Description Remarks Markets Rank
* WB373300 P.C.B. MAIN J
* WB373400 P.C.B. MAIN UC
* WB373500 P.C.B. MAIN RTK
* WB373600 P.C.B. MAIN A
* WB373700 P.C.B. MAIN BG
CB1 VB389900 CN.BS.PIN 3P 01
CB3 VB390600 CN.BS.PIN 10P 01
CB4 VB858800 CN.BS.PIN 9P 01
CB5 VP206500 HOLDER.FUS EYF-52BCT RTK 01
CB6 VP206500 HOLDER.FUS EYF-52BCT RTK 01
CB7 VP206500 HOLDER.FUS EYF-52BCT 01
CB8 VP206500 HOLDER.FUS EYF-52BCT 01
CB9 VB390500 CN.BS.PIN 9P 03
CB10 LB932020 CN.BS.PIN 2P 01
* C1 WB540200 C.POL.MTL 0.1uF ECQE2104KF3
C2 UR837470 C.EL 47uF 16V 01
C3 UR837470 C.EL 47uF 16V 01
C4 UR897100 C.EL 10uF 100V 01
YST-SW315
P.C.B. MAIN
Schm
Ref. PART NO. Description Remarks Markets Rank
C57 UA655100 C.MYLAR 0.1uF 50V 01
C58 UA654220 C.MYLAR 0.022uF 50V 01
C59 UA654220 C.MYLAR 0.022uF 50V 01
C60 UR798330 C.EL 330uF 100V 02
C86 FG644100 C.CE 0.01uF 50V 01
C87 FG644100 C.CE 0.01uF 50V 01
C88 UA654100 C.MYLAR 0.01uF 50V 01
C89 UA654100 C.MYLAR 0.01uF 50V 01
C90 UA654220 C.MYLAR 0.022uF 50V 01
C91 FG644100 C.CE 0.01uF 50V 01
C92 UR867100 C.EL 10uF 50V 01
C94 UR828220 C.EL 220uF 10V 01
C95 UR865470 C.EL 0.47uF 50V 01
C96 UR867220 C.EL 22uF 50V 01
s C97 V7682500 C.CE.SAFTY 1500pF 250V 01
C201 UR867100 C.EL 10uF 50V 01
C202 FG612220 C.CE 220pF 50V 01
C203 UA654390 C.MYLAR 0.039uF 50V 01
YST-SW315
C204 UR838100 C.EL 100uF 16V 01
C205 UR838100 C.EL 100uF 16V 01
C206 UR867100 C.EL 10uF 50V 01
C207 FG612220 C.CE 220pF 50V 01
C208 UR867100 C.EL 10uF 50V 01
C209 UR867100 C.EL 10uF 50V 01
C210 VA761000 C.CE 22pF 50V RTKBG 01
C211 UA655390 C.MYLAR 0.39uF 50V 01
C212 VE326400 C.MYLAR.ML 0.22uF 50V 01
C213 UR837470 C.EL 47uF 16V 01
C214 UA655470 C.MYLAR 0.47uF 50V 01
C217 VA777700 C.CE 220pF 50V RTKBG 01
C218 UA654470 C.MYLAR 0.047uF 50V 01
C219 FG644100 C.CE 0.01uF 50V 01
C220 UR867100 C.EL 10uF 50V 01
C221 FG652100 C.CE 100pF 50V 01
C222 FG613100 C.CE 1000pF 50V 01
C223 FG644100 C.CE 0.01uF 50V 01
C224 UA655100 C.MYLAR 0.1uF 50V 01
C225 UR866100 C.EL 1uF 50V 01
C226 UA654100 C.MYLAR 0.01uF 50V 01
C227 UR838330 C.EL 330uF 16V 01
C228 UR838220 C.EL 220uF 16V 01
C229 FG644100 C.CE 0.01uF 50V 01
C230 FG644220 C.CE 0.022uF 50V 01
C231 UR867100 C.EL 10uF 50V 01
C232 VE326400 C.MYLAR.ML 0.22uF 50V 01
C233 VE326400 C.MYLAR.ML 0.22uF 50V 01
C234 UR867100 C.EL 10uF 50V 01
C235 VE326200 C.MYLAR.ML 0.15uF 50V
C236 VE327000 C.MYLAR.ML 0.68uF 50V 01
* C238 UR778470 C.EL 470uF 63V RTK
C239 UR867100 C.EL 10uF 50V RTK 01
C240 UR749100 C.EL 1000uF 25V JUCABG 01
C241 UR867100 C.EL 10uF 50V 01
New Parts
#
17
YST-SW315
P.C.B. MAIN
Schm
Ref. PART NO. Description Remarks Markets Rank
C242 FG644100 C.CE 0.01uF 50V 01
C243 FG644100 C.CE 0.01uF 50V 01
s D1 VQ111400 DIODE.BRG D5SBA20-4001 6A 03
s D2 VR253700 DIODE.BRG S1NB20 1A 200V 02
D3 VD631600 DIODE 1SS133,176 01
D4 VD631600 DIODE 1SS133,176 01
D5 VD631600 DIODE 1SS133,176 01
D6 VD631600 DIODE 1SS133,176 01
D7 VG442500 DIODE.ZENR MTZJ24B 24V 01
D9 VD631600 DIODE 1SS133,176 01
s D11 VR253700 DIODE.BRG S1NB20 1A 200V 02
D12 VD631600 DIODE 1SS133,176 01
D13 VD631600 DIODE 1SS133,176 01
D14 VD631600 DIODE 1SS133,176 01
D15 VU264100 DIODE 1SR139-400 01
D19 VD631600 DIODE 1SS133,176 01
D20 VG436400 DIODE.ZENR MTZJ3.6B 3.6V 01
D21 VU264100 DIODE 1SR139-400 01
YST-SW315
P.C.B. MAIN
Schm
Ref. PART NO. Description Remarks Markets Rank
IC201 X2020A00 IC LB8555D 04
* IC202 X4472A00 IC NJM78L08A-T3
* L1 V8426000 COIL 120uH BCS10-03060
* L2 V8426000 COIL 120uH BCS10-03060
L3 VU038200 COIL 0.95uH 02
PJ1 V6415800 JACK.PIN 2P 03
* PN1 WB543600 PIN WB54360 L=50 #18
* PN2 WB543600 PIN WB54360 L=50 #18
# Q1A iX632610 TR 2SA1837 O,Y 02
# Q1C iX632620 TR 2SC4793 O,Y 02
Q2 iC1815I0 TR 2SC1815 Y 01
Q3 iA097030 TR 2SA970 GR,BL 01
Q4 iA097030 TR 2SA970 GR,BL 01
Q5 iC1815I0 TR 2SC1815 Y 01
Q6 iA1015I0 TR 2SA1015 Y 01
Q7 iA097030 TR 2SA970 GR,BL 01
Q8 VE198700 TR 2SA1145 O,Y 01
# Q9 VC398100 TR 2SC1846 S 01
YST-SW315
Q10 VE198800 TR 2SC2705 O,Y 01
# Q16A iX606460 TR 2SA1492 O,P,Y 05
# Q16C iX606470 TR 2SC3856 O,P,Y 05
# Q17A iX606460 TR 2SA1492 O,P,Y 05
# Q17C iX606470 TR 2SC3856 O,P,Y 05
Q18 iC1815I0 TR 2SC1815 Y 01
Q19 iA1015I0 TR 2SA1015 Y 01
Q20 iC224030 TR 2SC2240 GR,BL 01
Q21 iA097030 TR 2SA970 GR,BL 01
Q22 iA097030 TR 2SA970 GR,BL 01
Q23 iC224030 TR 2SC2240 GR,BL 01
Q24A iX632610 TR 2SA1837 O,Y 02
Q24C iX632620 TR 2SC4793 O,Y 02
Q25 V3028000 FET 2SK304 E 01
Q26A iX632610 TR 2SA1837 O,Y 02
Q26C iX632620 TR 2SC4793 O,Y 02
Q27 VE198800 TR 2SC2705 O,Y 01
Q28 VE198800 TR 2SC2705 O,Y 01
Q29 VE198700 TR 2SA1145 O,Y 01
Q30 VE198700 TR 2SA1145 O,Y 01
Q31 iA097030 TR 2SA970 GR,BL 01
Q32 iC224030 TR 2SC2240 GR,BL 01
Q37 iA097030 TR 2SA970 GR,BL 01
Q38 iC224030 TR 2SC2240 GR,BL 01
Q201 iA097030 TR 2SA970 GR,BL 01
Q202 iA097030 TR 2SA970 GR,BL 01
Q203 iC287820 TR 2SC2878 A,B 01
Q204 iC287820 TR 2SC2878 A,B 01
Q205 iC224030 TR 2SC2240 GR,BL 01
Q206 iC224030 TR 2SC2240 GR,BL 01
Q207 iC224030 TR 2SC2240 GR,BL RTK 01
Q208 VK801200 TR 2SC4688 R,O RTK 04
Q209 iC224030 TR 2SC2240 GR,BL 01
R2 HV755470 R.CAR.FP 470 1/4W 01
R3 HV755470 R.CAR.FP 470 1/4W 01
New Parts
#
19
YST-SW315
P.C.B. MAIN
Schm
Ref. PART NO. Description Remarks Markets Rank
R4 V7093700 R.MTL.OXD 1.8K 3W
R10 HB027100 R.MTL.FLM 10K 1/4W
R11 HB027100 R.MTL.FLM 10K 1/4W
R12 HB027100 R.MTL.FLM 10K 1/4W
R16 HV753470 R.CAR.FP 4.7 1/4W 01
R17 VG730500 R.MTL.OXD 0.15 3W 01
R18 VG730500 R.MTL.OXD 0.15 3W 01
R19 HV755470 R.CAR.FP 470 1/4W 01
R20 HV753470 R.CAR.FP 4.7 1/4W 01
R22 HV756220 R.CAR.FP 2.2K 1/4W 01
R23 HV755330 R.CAR.FP 330 1/4W 01
R27 HV753100 R.CAR.FP 1 1/4W 01
R28 HV753100 R.CAR.FP 1 1/4W 01
R31 HB026390 R.MTL.FLM 3.9K 1/4W 01
R32 HV754220 R.CAR.FP 22 1/4W 01
R33 HV755220 R.CAR.FP 220 1/4W 01
R39 HB028100 R.MTL.FLM 100K 1/4W
R40 HV755220 R.CAR.FP 220 1/4W 01
YST-SW315
New Parts
# : Not available
21
A B C D E F G H I J
YST-SW315
1
EXPLODED VIEW 20 MECHANICAL PARTS
Rear Panel Ass'y Schm
Ass'y Ref. PART NO. Description Remarks Markets Rank
20 * 1 WB373800 CABINET ASS'Y CH
* 1 WB373900 CABINET ASS'Y BL
* 2 X4457A00 DRIVER, WOOFER 25cm 6 JA2564
* 3-1 WB248400 FRONT PANEL
8 U, C models only * 3-3 WB276500 SWITCH KNOB
2 * 3-4 WB276700 VOLUME KNOB
3-11 EP600280 BIND HEAD P-TITE SCREW 3x8 MFZN2Y 01
* 4-1-1 WB373300 PCB ASS'Y MAIN J
* 4-1-1 WB373400 PCB ASS'Y MAIN UC
* 4-1-1 WB373500 PCB ASS'Y MAIN RTK
* 4-1-1 WB373600 PCB ASS'Y MAIN A
* 4-1-1 WB373700 PCB ASS'Y MAIN BG
to Speaker 1 * 5 WB258800 BASE
6 V2729700 EMBLEM A 09
7 V7324600 BUSH
3
8 V6933900 FERRITE CORE ESD-2-25SD UC
20 WA206700 BIND HEAD TAPPING SCREW 4x35 MFZN2BL 01
7 21 VF573000 BIND HEAD TAPPING SCREW 4x25 MFZN2BL 01
22 WA200300 HEXAGON SOCKET TAPPING SCREW 3x20 MFNI33 01
22
3-3
5
3-1
3-4 22
203 6
6 21
200
201
7
20
5 New Parts
#
22
A B C D E F G H I J
YST-SW315
1
EXPLODED VIEW (REAR PANEL ASSY) MECHANICAL PARTS (REAR PANEL ASSY)
Schm
Ref. PART NO. Description Remarks Markets Rank
4-1-1 (3)
* 4-1-1 WB373300 PCB ASS'Y MAIN J
* 4-1-1 WB373400 PCB ASS'Y MAIN UC
* 4-1-1 WB373500 PCB ASS'Y MAIN RTK
4-35 4-1-6A 4-1-6C * 4-1-1 WB373600 PCB ASS'Y MAIN A
* 4-1-1 WB373700 PCB ASS'Y MAIN BG
2 # 4-1-5A iX606460 TRANSISTOR 2SA1492 O,P,Y Q16A,Q17A 05
(10) # 4-1-5C iX606470 TRANSISTOR 2SC3856 O,P,Y Q16C,Q17C 05
4-1-1 # 4-1-6A iX632610 TRANSISTOR 2SA1837 O,Y Q1A 02
4-35 # 4-1-6C iX632620 TRANSISTOR 2SC4793 O,Y Q1C 02
4-32 # 4-1-7 VC398100 TRANSISTOR 2SC1846 S Q9 01
4-1-5A 4-1-7 4-1-5C
4-1-8 VK195900 SHEET 19x24 01
4-1-11 VT669300 PW HEAD B-TITE SCREW 3x8-8 MFC2 01
4-1-11
4-22 4-1-12 EP600190 BIND HEAD B-TITE SCREW 3x8 MFZN2BL 01
4-1-13 VK173200 SCREW, TRANSISTOR 3x15 SP MFC2 01
s 4-3 V6893000 POWER CABLE 2m J 06
3
4-37 s 4-3 V2689600 POWER CABLE 2m UC 05
4-1-1 (1) 4-38 * s 4-3 WA507100 POWER CABLE 2m R
s 4-3 VZ555600 POWER CABLE 2m T 05
* s 4-3 V8012900 POWER CABLE 2m K
4-34 * s 4-3 V6792800 POWER CABLE 2m A
4-35
* s 4-3 V6977100 POWER CABLE 2m B
4-33
4-32 * s 4-3 V6893100 POWER CABLE 2m G
4-1-8 4-33 4-4 CB072750 CORD STOPPER SR-4N-4 01
4-35
s 4-5 X2221A00 POWER TRANSFORMER J 15
4 * s 4-5 XY289C00 POWER TRANSFORMER UC
4-31
* s 4-5 XY290C00 POWER TRANSFORMER RTK
4-32 * s 4-5 XY291C00 POWER TRANSFORMER A
4-37
4-20 * s 4-5 XY292C00 POWER TRANSFORMER BG
s 4-7 V5520700 ROCKER SWITCH JW-M11RKK UCS TV-5 06
4-32
4-1-13 4-8 CB069250 BINDING TIE BK-1 01
4-39
4-7 * 4-11 WB276900 REAR PANEL J
4-1-12
4-28 * 4-11 WB277000 REAR PANEL UC
(6) * 4-11 WB277100 REAR PANEL RTK
4-3
5 * 4-11 WB277200 REAR PANEL A
4-1-1
4-19 * 4-11 WB277300 REAR PANEL BG
4-28 4-4 * 4-18 WB249900 COVER
4-5
* 4-19 WB377300 PACKING
4-1-1 (5) 4-11 * 4-20 WB377400 PACKING E
4-1-1 (11) J,B, U,G models
C, A,
4-21 V7324600 BUSH
4-18 4-1-1 (7) R, T, K models * 4-22 WB279400 REAR COVER
* 4-28 WB828100 PACKING
4-31 V6655200 BIND HEAD S-TITE SCREW 4x8 MFZN2BL
R, T, K version
4-32 EP600190 BIND HEAD B-TITE SCREW 3x8 MFZN2BL 01
6 4-21
4-33 EG340190 BIND HEAD B-TITE SCREW 4x8 MFZN2BL 01
4-34 EP630660 BIND HEAD P-TITE SCREW 3x10 MFZN2BL 01
4-35 4-35 VT669300 PW HEAD B-TITE SCREW 3x8-8 MFC2 01
4-36 4-36 VA295800 BIND HEAD SCREW 3x8 MFZN2BL RT 01
4-37 VA847600 BIND HEAD P-TITE SCREW 4x12 MFZN2BL 01
4-38 VC082800 BIND HEAD BONDING SCREW 3x6 MFC2BL 01
4-1-1 (2) 4-39 VK697600 BIND HEAD B-TITE SCREW 3x10 SP MFZN2Y 01
Replace this Bush with
the new article when 4-1-1 (9)
remove the Rear Panel 4-8
Ass'y.
7 Ass'y
4-19
New Parts
#
23
YST-SW315