InteliDrive

IPC

Order code: ID2IPCXXBAA

Irrigation Pump Controller
Datasheet
Product description
The InteliDrive IPC is a cost effective and Pump functionalities: flow meter, flow switch,
sophisticated irrigation pump controller, which set of flexible timers
features outstanding control, monitoring and Selectable protections alarm/shutdown
protection for both mechanical and electronic
3 levels of password protection
diesel/gas engines all in one unit. The controller is
Ethernet, USB, GSM/GPRS, RS485 or
designed for the specific requirements of the
RS232/Modem/Modbus communication
irrigation system, which comprises a diesel engine
and pump. Automatic SMS on alarm
On-line control and monitoring over web pages
Key features (embedded web server)
Engine and pump controller for land-based and 2 languages (user changeable)
marine Tier4 applications Real time clock and event history log
Control, monitoring and protection for both
Front panel sealed to IP65
mechanical and electronic diesel/gas engines in
EN, UL certifications
one unit
Automatic, manual or remote start/stop of the Application overview
engine
Support of engines with Electronic Control Unit
(ECU) - J1939 or Cummins Modbus
Analog oil pressure, water temperature, fuel
level, battery voltage, engine speed (pick-up)
Smooth engine speed control by Up/Down
controller buttons, binary inputs for predefined
speed options, Speed Up/Down binary inputs or
one analog input

|InteliDrive IPC Datasheet |Related HW ver: 1.6 |Related SW ver: 1.0.0 |Date of issue: 15.3.2016 1
 Technical data
Power supply Input impedance > 100 k
Precision 1 % 1 mV out of measured value
Power supply range 8 - 36 V DC
Supported sensor User-defined: 30 points non-linear
Power supply drop-out
100 ms (from min. 10 V) types sensors can be defined by the user
immunity
Power consumption 440 mA @ 8 V; 40 mA @ 36 V Communication
Backup battery type CR 1225 External modules
Estimated backup CAN 250 kbps, max 200 m
10 years Isolated
battery lifetime

Operating conditions Magnetic pick-up

Operating temperature -20 .. +70 C Voltage input range 2 - 70 V
pp

95% non-condensing 4 Hz - 10 kHz (min 2 V @

pp
Operating humidity
(IEC/EN 60068-2-30) Frequency input range 4Hz - 4 kHz, 6 V @ 10
pp
Protection degree (front kHz)
IP65
panel) Frequency measurement
0.2 %
5-25 Hz, +/- 1,6 mm; 25-100 tolerance
Vibration
Hz, a = 4 g
Shocks a 200 m/s2
D+
max
300 mA, during the engine start
Storage temperature -30 .. +80 C Excitation current
only
Binary inputs Charging fail
80 % of U
threshold supply
Number 5 non-isolated
Input resistance 4,2 k Voltage range 0 - 60 V (max. 70 V)

Common pole Positive, V = 8 - 36 V DC Voltage accuracy 0.1 V

s
0 - 2 V close contact
Close/Open indication
4 V - V open contact
Display
s
Type Built-in monochromatic
Binary outputs Resolution 128x64

Number 5 non-isolated
Operating voltage 8 - 36 V DC
Switching to negative supply terminal
Max current 0,5 A (2 A per group)

Analog inputs - resistive

Number 3 non-isolated
Electrical range 0 - 2500
Resolution 10 bits, 4 digits
Precision 2 % 2 out of measured value
Predefined: VDO 10Bar, VDO
Supported sensor Temperature, VDO Fuel level
types User-defined: 30 points non-linear
sensors can be defined by the user

Analog inputs - voltage

Number 3 non-isolated
Electrical range 0 - 10 V
Resolution 10 bits, 4 digits

InteliDrive IPC Datasheet 2

 Dimensions, terminals and mounting

Plug in module

Note: Dimension x depends on plug-in module

Panel door mounting Overview of parameter x

Plug-in module Parameter x [mm]
IL-NT-AOUT8 75
IL-NT-BIO8 74
IL-NT-IO1 75
IL-NT-AIO 75
IL-NT-RS232 113
IL-NT-RS232-485 115 @ RS232 / 74 @ RS485
IL-NT-S-USB 128
IB-Lite 108
IL-NT-GPRS 122

Note: Parameter x includes reserve for connectors of plug-in modules.

Note: The controller is to be mounted onto the switchboard door. The requested cut-out size is 175x115 mm.
Use the screw holders delivered with the controller to fix the controller into the door.

InteliDrive IPC Datasheet 3

 Available extension modules
Product Description Order code
IL-NT-AOUT8 8 analog outputs packed in a unit IL-NT-AOUT8
IL-NT-BIO8 8 binary inputs in a unit (HW switchable to 8 binary outputs) IL-NT-BIO8
IL-NT-IO1 4 binary inputs and 4 analog inputs in a unit IL-NT-IO1
IL-NT-AIO 4 configurable analog inputs and 1 configurable analog output in a unit IL-NT-AIO
IGL-RA15 15 binary LED output (3 colors) packed in a rugged metal unit IGL-RA15
IL-NT-RS232 Communication module which provides additional RS232 interface for controller IL-NT-RS232
IL-NT-RS232-485 Communication module which provides additional RS232 and RS485 interface for controller IL-NT-232-485
IL-NT-S-USB Communication module which provides additional USB interface for controller IL-NT-S-USB
IB-Lite Communication module which provides additional Ethernet interface for controller IB-Lite
IL-NT-GPRS Communication module with integrated GSM modem with GPRS Internet connection IL-NT-GPRS
I-LB+ Direct connection (PC) to all controllers on CAN2 I-LB+
InternetBridge-NT Multiple Internet connections (PC and Modbus) to all controllers on CAN2 or RS485 IB-NT

Certificates and standards

EN 60068-2-30

EN 61000-6-1
EN 61000-6-2
EN 61000-6-3
EN 61000-6-4
EN 61010-1

All certificates and standards are available on: https://webstore.iec.ch/publication/.

Manufacturer:
ComAp a.s. Fax: +420 266 316 647
Czech Republic E-mail: [email protected]
Phone: +420 246 012 111 Internet: www.comap.cz

InteliDrive IPC Datasheet 4