0% found this document useful (0 votes)
391 views4 pages

InteliDrive IPU Datasheet

The InteliDrive IPU is an engine controller suitable for pumps, compressors and other simple engine applications. It features control, monitoring and protection of diesel/gas engines in one unit with start/stop, speed control, protections and communication options. Key features include password protection, Ethernet/USB/GSM connectivity, alarm SMS, online control/monitoring via web pages and event logging. It has inputs for sensors, outputs for control and optional extension modules for additional functionality.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
391 views4 pages

InteliDrive IPU Datasheet

The InteliDrive IPU is an engine controller suitable for pumps, compressors and other simple engine applications. It features control, monitoring and protection of diesel/gas engines in one unit with start/stop, speed control, protections and communication options. Key features include password protection, Ethernet/USB/GSM connectivity, alarm SMS, online control/monitoring via web pages and event logging. It has inputs for sensors, outputs for control and optional extension modules for additional functionality.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

InteliDrive

IPU

Order code: ID2IPUXXBAA


Industrial Power Unit Controller
Datasheet
Product description
The InteliDrive IPU is a cost effective and 3 levels of password protection
sophisticated engine controller, which features Ethernet, USB, GSM/GPRS, RS485 or
outstanding control, monitoring and protection for RS232/Modem/Modbus communication
both mechanical and electronic diesel/gas engines
Automatic SMS on alarm
all in one unit. The controller is suitable for pumps,
On-line control and monitoring over web pages
compressors, and other simple engine control
(embedded web server)
requirements.
2 languages (user changeable)
Key features Real time clock and event history log
Engine controller for land-based and marine Push buttons for simple control, lamp test
Tier4 applications Front panel sealed to IP65
Control, monitoring and protection for both
EN, UL certifications
mechanical and electronic diesel/gas engines in
one unit
Automatic, manual or remote start/stop of the Application overview
engine
Support of engines with Electronic Control Unit
(ECU) - J1939 or Cummins Modbus
Analog oil pressure, water temperature, fuel
level, battery voltage, engine speed (pick-up)
Smooth engine speed control by Up/Down
controller buttons, binary inputs for predefined
speed options, Speed Up/Down binary inputs or
one analog input
Selectable protections alarm/shutdown

|InteliDrive IPU Datasheet |Related HW ver: 1.6 |Related SW ver: 1.0.0 |Date of issue: 15.3.2016 1
Technical data
Power supply Magnetic pick-up
Power supply range 8 - 36 V DC Voltage input range 2 - 70 V
pp
Power supply drop-out 4 Hz - 10 kHz (min 2 V @
100 ms (from min. 10 V) pp
immunity Frequency input range 4Hz - 4 kHz, 6 V @ 10
pp
Power consumption 440 mA @ 8 V; 40 mA @ 36 V kHz)

Backup battery type CR 1225 Frequency measurement


0.2 %
tolerance
Estimated backup
10 years
battery lifetime
D+
Operating conditions 300 mA, during the engine start
Excitation current
Operating temperature -20 .. +70 C only

95% non-condensing Charging fail


Operating humidity 80 % of U
threshold supply
(IEC/EN 60068-2-30)
Protection degree (front Voltage range 0 - 60 V (max. 70 V)
IP65
panel) Voltage accuracy 0.1 V
5-25 Hz, +/- 1,6 mm; 25-100
Vibration
Hz, a = 4 g Display
Shocks a 200 m/s2
max Type Built-in monochromatic
Storage temperature -30 .. +80 C Resolution 128x64

Binary inputs
Number 4 non-isolated
Input resistance 4,2 k
Common pole Positive, V = 8 - 36 V DC
s
0 - 2 V close contact
Close/Open indication
4 V - V open contact
s

Binary outputs
Number 4 non-isolated
Operating voltage 8 - 36 V DC
Switching to negative supply terminal
Max current 0,5 A (2 A per group)

Analog inputs
Number 3 non-isolated
Electrical range 0 - 2500
Resolution 10 bits, 4 digits
Precision 2 % 2 out of measured value
Predefined: VDO 10Bar, VDO
Supported sensor Temperature, VDO Fuel level
types User-defined: 30 points non-linear
sensors can be defined by the user

Communication
External modules
CAN 250 kbps, max 200 m
Isolated

InteliDrive IPU Datasheet 2


Dimensions, terminals and mounting

Plug in module

Note: Dimension x depends on plug-in module

Panel door mounting Overview of parameter x


Plug-in module Parameter x [mm]
IL-NT-AOUT8 75
IL-NT-BIO8 74
IL-NT-IO1 75
IL-NT-AIO 75
IL-NT-RS232 113
IL-NT-RS232-485 115 @ RS232 / 74 @ RS485
IL-NT-S-USB 128
IB-Lite 108
IL-NT-GPRS 122

Note: Parameter x includes reserve for connectors of plug-in modules.

Note: The controller is to be mounted onto the switchboard door. The requested cut-out size is 175x115 mm.
Use the screw holders delivered with the controller to fix the controller into the door.

InteliDrive IPU Datasheet 3


Available extension modules
Product Description Order code
IL-NT-AOUT8 8 analog outputs packed in a unit IL-NT-AOUT8
IL-NT-BIO8 8 binary inputs in a unit (HW switchable to 8 binary outputs) IL-NT-BIO8
IL-NT-IO1 4 binary inputs and 4 analog inputs in a unit IL-NT-IO1
IL-NT-AIO 4 configurable analog inputs and 1 configurable analog output in a unit IL-NT-AIO
IGL-RA15 15 binary LED output (3 colors) packed in a rugged metal unit IGL-RA15
IL-NT-RS232 Communication module which provides additional RS232 interface for controller IL-NT-RS232
IL-NT-RS232-485 Communication module which provides additional RS232 and RS485 interface for controller IL-NT-232-485
IL-NT-S-USB Communication module which provides additional USB interface for controller IL-NT-S-USB
IB-Lite Communication module which provides additional Ethernet interface for controller IB-Lite
IL-NT-GPRS Communication module with integrated GSM modem with GPRS Internet connection IL-NT-GPRS
I-LB+ Direct connection (PC) to all controllers on CAN2 I-LB+
InternetBridge-NT Multiple Internet connections (PC and Modbus) to all controllers on CAN2 or RS485 IB-NT

Certificates and standards


EN 60068-2-30

EN 61000-6-1
EN 61000-6-2
EN 61000-6-3
EN 61000-6-4
EN 61010-1

All certificates and standards are available on: https://webstore.iec.ch/publication/.

Manufacturer:
ComAp a.s. Fax: +420 266 316 647
Czech Republic E-mail: [email protected]
Phone: +420 246 012 111 Internet: www.comap.cz

InteliDrive IPU Datasheet 4

You might also like