Scribd
Upload
204 views

JVL MotoWare32 Programming Software For JVL Controllers

MotoWare32 is a Windows-based programming software that makes it easier to program JVL motor controllers. It allows users to edit multiple control programs simultaneously with each saved as a separate file. Programs can be written in a simple BASIC-like language and then transferred to the controller. MotoWare32 also enables online communication with controllers and monitoring of parameters like motor power and velocity while programs are running. The software is supplied on CD-ROM and easily installed to provide a simple interface for programming and setting up JVL stepper and servo controllers.

Uploaded by

Electromate
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
204 views

JVL MotoWare32 Programming Software For JVL Controllers

MotoWare32 is a Windows-based programming software that makes it easier to program JVL motor controllers. It allows users to edit multiple control programs simultaneously with each saved as a separate file. Programs can be written in a simple BASIC-like language and then transferred to the controller. MotoWare32 also enables online communication with controllers and monitoring of parameters like motor power and velocity while programs are running. The software is supplied on CD-ROM and easily installed to provide a simple interface for programming and setting up JVL stepper and servo controllers.

Uploaded by

Electromate
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MotoWare32

Programming Software for JVL Controllers

With JVLs new windows-based


programming tool,
MotoWare32, it is now easier to
program your motor controller.

MotoWare32 allows you to


easily edit one or several control
programs simultaneously. Each
program is saved in a separate
file which can be opened and
edited as required. Once a
program has been written, it can
be easily transferred to a Con-
troller.

The Controller type, Controller


address and whether checksum For users of JVL step- and servo ity, torque etc. graphically to
is to be used during transmis- controllers, SMI3x, SMC35 and assist set-up and trouble shoot-
sion are selected. The [Send] AMC20, it is easy to create the ing.
button is then selected and the correct set-up. MotoWare32
control program is transferred in windows display a total over- With the new Poll-function is it
the correct format to the se- view of the various parameters. now possible to view different
lected controller. Several parameter sets can be parameters used in the program
stored using individual names, when it is running.
MotoWare32 also enables on- and these sets can be opened,
line communication with a edited and sent to the control-
motor controller. The on-line ler. The set-up of a specific
editor window functions in the controller can also be retrieved
same way as a terminal pro- from the controller and dis-
gram. Key-in a command string, played on the screen or stored
press [Enter] and the command in the computer.
is sent to the selected controller.
All responses from the control- With JVL AC-Servocontroller,
ler are automatically detected AMC20, it is in addition possible
and displayed. to monitor motor power, veloc-

LD0060-01GB Sold & Serviced By: Date: 3-11-04


ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
[email protected]
MotoWare32
Motoware32 is supplied on a CD-Rom
and is easily installed on a PC that
fulfils the System Requirements
below. MotoWare32 is built up like
other standard Windows programs and
it is therefore very easy to get started
and use the program. The Main Menu is
shown below:

The Main Menu can, as shown here,


also contain document windows.

Controller programs are easily opened


and edited. Simply select your controller
and whether addressing and checksum
are used. The control program code
itself is written in a very simple BASIC-
like language that is quickly learned.
Once a program has been written, the
SEND button is used to transmit the
program to the controller in the correct
format depending on the selected
controller type, with information on
addressing and checksum. If there is an
error in the program code, the program
line containing the error is automati-
cally displayed.
The control program can be saved on
hard-disk or diskette for subsequent
use.

The On-Line Editor, shown below,


enables direct communication with
your controller. Simply key-in the
command line, press <ENTER> and the System
command is sent to the controller in Requirements:
the correct format, with addressing and
PC with Windows 3.1 or later
checksum information. Messages from
COM port available
the controller are received and auto-
Hard-disk with 1.5-2 Mbyte available
matically displayed.
space
It is also possible to obtain a very quick
overview of the set-up of your servo-
controller. A window shows the most
important set-up parameters. To adjust
individual parameters, simply key-in
the required value in the correct field JVL Industri Elektronik A/S
and select SEND. The new value is then Blokken 42
set up on the Controller. It couldnt be DK-3460 Birkerd, Denmark
simpler. Tel: +45 4582 4440
ming JVL Motor Controllers, SMI3x, Fax: +45 4582 5550
Motoware32 can be used for program- SMC35 and AMC20. E-mail: [email protected] www.jvl.dk
Sold & Serviced By:

ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
[email protected]

You might also like