E-

Sold & Serviced By:

ELECTROMATE

ET
R

Toll Free Phone (877) SERVO98 DRIVE

DRIVE

AC
Toll Free Fax (877) SERV099
www.electromate.com
[email protected]

Economical Thrust
Ball Screw
Linear
Actuators

Force from 200 to 300 LBf

Velocity to 33 in/sec
Ratio 1:1 and 2:1
Sealed from Contamination (IP54)
Piston with Rugged Anti-Rotation
Any Motor up to 3.5 Square
Optional Adjustable Limit Switch Positions

E- AC ET Linear Actuator Capabilities:

Model Thrust Linear Travel Frame Lead(2) Ball Ball Torque @ Dynamic Dynamic Motor Unit
Number Load Velocity Length(1) Size Screw Screw Ball Screw Capacity Capacity Gearhead Weight
Rated Max. Max. Diameter Max. Max. per per Frame U Motor
million million Supported Mount
revs inches Max.
(lbf) (in/sec) (in) (in) (in) (in) (RPM) (in-lb) (lbf) (lbf) (in) (lb)

ET202-06 200 33 6 2.25 0.50 0.50 3,960 18 1,070 850 3.5 9.0
ET202-12 200 20 12 2.25 0.50 0.50 2,400 18 1,070 850 3.5 12.0
ET203-06 300 13 6 2.25 0.20 0.63 3,900 14 1,070 850 3.5 9.0
ET203-12 300 10 12 2.25 0.20 0.63 3,000 14 1,070 850 3.5 12.0
(1) Intermediate lengths are available. (2) Lead accuracy is 0.003 in/ft; Backlash is 0.004 in max.

Precision Mechanical Products

For Application Support 800-878-1157

R

DRIVE
DRIVE
DRIV E Call us Today at Fax: 860-953-0496
A C TQuality
U AT Since
O R S1980 Web www.edrivedesign.com Email [email protected] Tel: 860-953-0588
 E- ET
Sold & Serviced By:

ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
[email protected]
AC
Graph: Life Vs. Load
Life vs Load EQUIVALENT LOAD is the average force over the working
stroke, weighted proportionately to the distance traveled. For
constant force loads, the equivalent load is the same as the
typical or average load. Where forces vary due to gravity,
angle of actuator, acceleration and deceleration, friction, and
B10 Life (million Inches)

changing dynamic loads at different positions, it is best to

determine the equivalent load in order to most accurately pre-
dict the B10 life of the actuator.

3
F= L1(F1)3 +L2(F2)3 +L3(F3)3 +L4(F4)3 +.......Ln(Fn)3

Where: Fn is the calculated force for segment "n" with travel

L
ET202/ET203
length of Ln and total travel L.
Find the intersection of this value and the appropriate curve.
The value on the scale to the left reflects the B10 life of the
actuator.
Equivalent Load (lb)

E- AC ET General Dimensions
Standard Unit: U-Parallel Offset Motor with Front Flange Configuration

Option: L-Inline Motor Configuration

For Application Support 800-878-1157

DRIVE 2 Call us Today at Fax: 860-953-0496
Tel: 860-953-0588
A C T U AT O R S Web www.edriveactuators.com Email [email protected] 120 Vanderbilt Avenue West Hartford, CT 06110
Sold & Serviced By:

ELECTROMATE

Toll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099
DRIVE
www.electromate.com

Option: Bottom Mount

[email protected]

Option: Clevis Mount

Option: Foot Mount

Option: Trunnion Mount

For Application Support 800-878-1157

DRIVE 3 Call us Today at Fax: 860-953-0496
Tel: 860-953-0588
A C T U AT O R S Web www.edriveactuators.com Email [email protected] 120 Vanderbilt Avenue West Hartford, CT 06110
 E- ET
Sold & Serviced By:

ELECTROMATE
Toll Free Fax (877) SERV099
www.electromate.com AC
Toll Free Phone (877) SERVO98

Rod End Options

[email protected]

Self-Aligning Coupler (1) Male Thread

+ .000 + .000
- .005 - .010

Spherical Rod Eye Female Eye

Rod End Options

Model A B C D E F G H J K L M N P Q R S T U
ET2 2.00 0.75 1/2-20 0.63 1.25 0.56 0.31 1.31 0.50 0.63 1.50 0.50 1.00 0.75 0.63 2.00 0.75 2.44 1.50
(1) Zero backlash version also available

How To Order:
Base Number Options Special
E T 2 0

Standard
Stroke Gearbelt
Reduction: Custom
Capacity (lb): x100 Length (in): 00- Direct Coupled Length (in):
Unit Mounting Option: 10- 1:1 00.00
MB Bottom Mount 20- 2:1
FF Front Flange N.C. Switch Qty:
Motor Position
MF Foot Mount
TF Front Trunnion
0, 1, 2, 3, etc.
1, 2, 3, 4
TR Rear Trunnion
0 = Inline
CR Rear Clevis N.O. Switch Qty:
(refer to figure)

End Effector/Rod End:

0, 1, 2, 3, etc.

E Female Eye
F Female Thread Switch Type:
A Self-Aligning Coupler Configuration: A - Hall Sourcing PNP
1

M Male Thread L- In-Line B - Hall Sinking NPN

4 2

S Spherical Rod Eye U- Parallel Offset 3 C - Reed

For Application Support 800-878-1157

The products shown in this catalog are intended for industrial use only and should not be used to lift,

Call us Today at
support or otherwise transport people, unless written authorization is obtained. The information

DRIVE provided in this catalog is believed to be accurate and reliable. However, EDRIVE assumes no
Fax: 860-953-0496
Tel: 860-953-0588
responsibility for its use or for any errors that may appear in this document. This information in this

800-878-1157
publication is subject to change without notice.

A C T U AT O R S

Web www.edriveactuators.com Email [email protected] 120 Vanderbilt Avenue West Hartford, CT 06110
2008 EDRIVE Design, Inc. Printed USA 05/2008