CFRP Wrap Cfw-600

Page 1 of 3
CFRP Wrap CFW-600

Woven Carbon Fiber Fabric for Structural Strengthening
____________________________________________________________________
Product Description CFRP Wrap CFW-600 is a unidirectional woven
carbon fiber fabric for the wet application process.
____________________________________________________________________________________________________
Uses Strengthening of reinforced concrete structures, brickwork
and timber to increase flexural and shear load capacity.
Reasons:
- Prevention of defects caused by seismic action
- Blast mitigation (accidents or terrorism)
- Improved seismic performance of masonry walls
- Substitute missing rebars
- Strength and ductility of columns
- Increasing loading capacity of structural elements
- Change of building utilization
- Structural design construction defects
- Improved serviceability
- Structural upgrading to comply with current standards
________________________________________________________________________________________________________
Advantages - Manufactured with weft fibers to keep the fabric
stable (heat-set process)
- Multifunctional use for every kind of strengthening
requirement
- Flexibility of surface geometry (Beams, columns,
chimneys, piles, walls, silos)
- Approvals available in several countries
- Low density for minimal additional weight
- Economical compared to traditional techniques
________________________________________________________________________________________________________
Approvals / Standards Conforms to the requirement of:
- ICBO Evaluation Report ER 5558 (USA)
________________________________________________________________________________________________________
Product Data
____________________________________________________________________________________________________
Fiber type Mid strength carbon fibers
__________________________________________________________________
Fiber Construction Fiber orientation: 0 (unidirectional)
Wrap: black carbon fibers (99% of total a real weight)
Weft: white thermoplastic heat-set fibers(1% of total a
real weight).
___________________________________________________________________________________________________
Packaging Fabric length / roll Fabric Width
1 roll in cardboard box = 50 m 500 mm
___________________________________________________________________________________________________________________________________________
Storage
_______________________________________________________________________________________________________
Storage Conditions/ 24 months from date of production if stored properly in
Shelf Life undamaged original sealed packaging in dry conditions
at temperatures between +5C and + 35 C
________________________________________________________________________________________________________
Page 2 of 3
_______________________________________________________________________________________________________
Technical Data
_______________________________________________________________________________________________________
2 2
Areal Weight 610 g/m 20 g/m
_______________________________________________________________________________________________________
Fabric Design Thickness 0.337 mm (based on fiber content)
______________________________________________________________________________________________________
Fiber Density 1.79 g/cm3
_______________________________________________________________________________________________________
Mechanical / Physical Properties
______________________________________________________________________________________________________
Dry Fiber Properties Tensile strength:
4900 N/mm2 (nominal)
Tensile E-modulus:
230, 000 N/mm2
Elongation at break:
1.5 % (nominal)
_______________________________________________________________________________________________________
Laminate Properties Laminate thickness:
1.4 mm per layer (impregnated with Chemdur 300)
Ultimate load:
1000 kN/mm2 (based on typical laminate thickness of
1.4 mm)
Tensile E-modulus:
48.0 kN/mm2 (based on typical laminate thickness of 1.4 mm)
Note:
The above values are typical and indicative only.
The achievable laminate properties obtained from tensile test
are dependent on the impregnating/laminating resin used and
the type of tensile testing procedure.
Apply material reduction factors according to the relevant
design standard.
_______________________________________________________________________________________________________
Design Design strain:
This value is dependent on the type of loading and must
be adapted according to the relevant design standards.
________________________________________________________________________________________________________
System Information
___________________________________________________________________________________________________________________________________________
System Structure The system configuration as described must be fully

compiled with and may not be changed.
Concrete primer Chemdur -300
Impregating / laminating resin Chemdur -300
Structural strengthening fabric CFRP Wrap CFW-600
For detailed resin properties, fabric application details and
general information, refer to Chemdur -300 Product Data
Sheet.
________________________________________________________________________________________________________
Page 3 of 3
________________________________________________________________________________________________________
Application Details
___________________________________________________________________________________________________________________________________________
Consumption Primer on prepared substrate (depending on the roughness):

- Smooth surface: ~ 0.5 Kg/m2 (Chemdur -300)
- Rough Surface: ~ 0.5 -1.0 Kg/m2 (Chemdur-300 mixed
with max.
Impregnation resin for every layer (manually or with saturator):
= 0.75 Kg/m2 (Chemdur -300)
___________________________________________________________________________________________________________
Substrate Quality Specific requirements:
Minimal substrate tensile strength: 1.0 N/mm2 or as specified
in the strengthening
________________________________________________________________________________________________________
Application Instructions
________________________________________________________________________________________________________
Application Method/ The fabric can be cut with special scissors or razor knife.
Tools Never fold the fabric. Refer to Chemdur -300 Product Data
Sheet for impregnating /laminating procedure.
________________________________________________________________________________________________________
Notes on Application/ This product may only be used by experienced professionals.
Limitations Minimum radius required for application around
corners: > 20 mm.
Grinding edges or building up with Chemdur mortars may be
necessary.
In fiber direction, overlapping of the fabric must be at least 100
mm depending on CFRP Wrap type or as specified in the
strengthening design.
For side-by-side application, no overlapping length in the weft
direction is required. Overlaps of additional layers must be
distributed over the column circumference.
The strengthening application is inherently structural and great
care must be taken when choosing suitably experienced
contractors.
The CFRP Wrap CFW-600 fabric is coated to ensure
maximum bond and durability with the Chemdur
impregnating/laminating resins. To maintain system
compatibility do not interchange system parts.
The CFRP Wrap CFW-600 can be coated with a cementitious
overlay or coatings for aesthetic and / or protective purposes.
Selection will be dependent on exposure requirements.
________________________________________________________________________________________________________
Health & Safety Non-Toxic & Non- Hazardous
________________________________________________________________________________________________________

CFRP Wrap Cfw-600

Uploaded by

Copyright:

Available Formats

CFRP Wrap Cfw-600

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CFRP Wrap Cfw-600

Uploaded by

Copyright:

Available Formats

Page 1 of 3

CFRP Wrap CFW-600

System Structure The system configuration as described must be fully

Consumption Primer on prepared substrate (depending on the roughness):

You might also like