This tutorial explains Subnetting in easy language with examples.

This tutorial is divided in

three sections. First section provides a basic overview of Subnetting tools. Second section
explains Subnetting process in easy steps. Last section includes Subnetting examples for
beginners.
Subnetting
Subnetting is a process of dividing large network into the smaller networks based on layer 3 IP
address. Every computer on network has an IP address that represent its location on network.
Two version of IP addresses are available IPv4 and IPv6. In this article we will perform
subnetting on IPv4.
IPv4
IP addresses are displayed in dotted decimal notation, and appear as four numbers separated
by dots. Each number of an IP address is made from eight individual bits known as octet. Each
octet can create number value from 0 to 255. An IP address would be 32 bits long in binary
divided into the two components, network component and host component. Network
component is used to identify the network that the packet is intend for, and host component
is used to identify the individual host on network.
IP addresses are broken into the two components:
Network component :- Defines network segment of device.
Host component :- Defines the specific device on a particular network segment

IP Classes in decimal notation

Class A addresses range from 1-126
Class B addresses range from 128-191
Class C addresses range from 192-223
Class D addresses range from 224-239
Class E addresses range from 240-254

0 [Zero] is reserved and represents all IP addresses.

127 is a reserved address and is used for testing, like a loop back on an interface.
255 is a reserved address and is used for broadcasting purposes.

This tutorial is the second part of our article Network Addressing Explained with Subnetting
and VLSM. You can read other parts of this article here.

http://computernetworkingnotes.com/ccna-study-guide/basic-of-network-addressing.html

This tutorial is the first part of this article. In this introductory part I explained how computers find
each other in network with basic terminology of network addressing.
http://computernetworkingnotes.com/ccna-study-guide/vlsm-tutorial-with-examples.html

This tutorial is the last part of this article. In this part I will explain VLSM in detail with examples.
Later I will provide a unique six steps method of VLSM that will help you in learning VLSM rapidly.

Subnet mask
Subnet mask is a 32 bits long address used to distinguish between network address and host
address in IP address. Subnet mask is always used with IP address. Subnet mask has only one
purpose, to identify which part of an IP address is network address and which part is host
address.
For example how will figure out network partition and host partition from IP address
192.168.1.10 ? Here we need subnet mask to get details about network address and host
address.

In decimal notation subnet mask value 1 to 255 represent network address and value 0
[Zero] represent host address.
In binary notation subnet mask on bit [ 1] represent network address while off bit[0]
represent host address.
In decimal notation
IP address 192.168.1.10
Subnet mask 255.255.255.0

Network address is 192.168.1 and host address is 10.

In binary notation

IP address 11000000.10101000.00000001.00001010
Subnet mask 11111111.11111111.11111111.00000000

Network address is 11000000.10101000.00000001 and host address is 00001010

IP Class Default Subnet Network bits Host bits Total hosts Valid hosts
A 255.0.0.0 First 8 bits Last 24 bits 16, 777, 216 16, 777, 214
B 255.255.0.0 First 16 bits Last 16 bits 65,536 65,534
C 255.255.255.0 First 24 bits Last 8 bits 256 254

Network ID
First address of subnet is called network ID. This address is used to identify one segment or
broadcast domain from all the other segments in the network.
Block Size
Block size is size of subnet including network address, hosts addresses and broadcast address.
Broadcast ID
There are two types of broadcast, direct broadcast and full broadcast.
Direct broadcast or local broadcast is the last address of subnet and can be hear by all hosts in
subnet.
Full broadcast is the last address of IP classes and can be hear by all IP hosts in network. Full
broadcast address is 255.255.255.255
The main difference between direct broadcast and full broadcast is that routers will not
propagate local broadcasts between segments, but they will propagate directed broadcasts.
Host Addresses
All address between the network address and the directed broadcast address is called host
address for the subnet. You can assign host addresses to any IP devices such as PCs, servers,
routers, and switches.
Subnetting
Subnetting is a process of breaking large network in small networks known as subnets.
Subnetting happens when we extend default boundary of subnet mask. Basically we borrow
host bits to create networks. Let's take a example
Being a network administrator you are asked to create two networks, each will host 30
systems. Single class C IP range can fulfill this requirement, still you have to purchase 2 class
C IP range, one for each. Single class C range provides 256 total addresses and we need only
30 addresses, this will waste 226 addresses. These unused addresses would make additional
route advertisements slowing down the network.
With subnetting you only need to purchase single range of class C. You can configure router to
take first 26 bits instead of default 24 bits as network bits. In this case we would extend
default boundary of subnet mask and borrow 2 host bits to create networks. By taking two bits
from the host range and counting them as network bits, we can create two new subnets, and
assign hosts them. As long as the two new network bits match in the address, then the
address belongs to the same network. You can change either of the two bits, and you would be
in a new subnet.

Advantage of Subnetting
Subnetting breaks large network in smaller networks and smaller networks are easier
to manage.
Subnetting reduces network traffic by removing collision and broadcast traffic, that
overall improve performance.
Subnetting allows you to apply network security polices at the interconnection between
subnets.
Subnetting allows you to save money by reducing requirement for IP range.

Subnetting math
Subnetting process involves binary math calculation. Computers communicate with each
others in binary language. To succeed in any kind of networking career, you might be fluent
in binary math calculation. Subnetting needs two type of calculation, convert decimal to
binary and convert binary to decimal.

Binary system works exactly same as decimal system, except the base number. Base number
is 2 in binary system and 10 in decimal system. To calculate decimal equivalent value of a
binary number, you have to replace base value 10 with 2. Binary numbers are displayed in
columns and each position in binary system has double value than the position in right. From
earlier section of this article you know that each number of an IP address is made from eight
individual bits known as octet. So you should remember at least eight decimal equivalent
value from binary position.

Base position 27 26 25 24 23 22 21 20

Decimal value 128 64 32 16 8 4 2 1

Convert decimal to binary

To convert a decimal number in binary we would use addition till number method. In this
method we start adding from left to get target value. If after adding right position value, sum
is lower than target number, keep adding, or if sum is greater than target number skip the
position value. Only the value of on bit [1] will be added in sum. Off bit [0] has zero value. For
example, convert decimal number 117 in binary.

Target decimal number 117

Move direction From Left ===========================> to Right

Base position 27 26 25 24 23 22 21 20

Decimal value 128 64 32 16 8 4 2 1

Bit status 0 1 1 1 0 1 0 1

Decimal value in
0 64 32 16 0 4 0 1
addition

Binary value of 117 is 01110101.

Decimal calculation Bit in binary
128 is greater than 117 off the bit
0+64 = 64 is less than 117 on the bit
0+64+32 = 96 is less than 117 on the bit
0+64+32+16 = 112 is less than 117 on the bit
0+64+32+16+8 = 120 is greater than 117 off the bit
0+64+32+16+0+4 = 116 is less than 117 0n the bit
0+64+32+16+0+4+2 = 118 is greater than 117 off the bit
0+64+32+16+0+4+0+1 = 117 is equivalent to 117 on the bit
Convert binary in decimal
To convert a binary in decimal we will follow above method in reverse mode. We will find the
decimal value of on binary bit position and add them. For example convert 10101010 binary
number in decimal.
Target binary number 10101010
Move direction From Left ===========================> to Right

Base position 27 26 25 24 23 22 21 20

Decimal value 128 64 32 16 8 4 2 1

Bit status 1 0 1 0 1 0 1 0

Decimal value in
128 0 32 0 8 0 2 0
addition

Decimal value of 10101010 is 170 [ 128+0+32+0+8+0+2+0 ].

Binary bit Decimal value
1 On bit 128
0 Off bit 0
1 On bit 64
0 Off bit 0
1 On bit 32
0 Off bit 0
1 On bit 8
0 Off bit 0
1 On bit 2
0 Off bit 0
Review above method and do as much practice of following as you can.
Pick any number from 0 - 255 and convert it in binary.
Pick any combination from 00000000 - 11111111 and convert it in decimal.

Better you are with this conversion, the better you will do on the subnetting.
Combination provided by binary position
Now you know the process of converting binary in decimal and decimal in binary. Our next
step is to figure out the combination provided by a binary position.
 First bit provide two combination 0 or 1. If we take two bits than we have four combinations
00,01,10,11. IP address has 32 bits, so you should be able to find the number of combinations
provided by each bit position until position number 32.

Number of
Number Number of Numbe Number of Numbe Numbe Number of
combination
of bit[s] combinations r of bits combinations r of bits r of bits combinations
s
1 2 9 512 17 131072 25 33554432

2 4 10 1024 18 262144 26 67108864

3 8 11 2048 19 524288 27 134217728

4 16 12 4096 20 1048576 28 268435456

5 32 13 8192 21 2097152 29 536870912

6 64 14 16384 22 4194304 30 1073741824

7 128 15 32768 23 8388608 31 2147483648

8 256 16 65536 24 16777216 32 4294967296

Default subnet mask

Class Subnet Mask Format

A 255.0.0.0 Network.Host.Host.Host

B 255.255.0.0 Network.Network.Host.Host

C 255.255.255.0 Network.Network.Network.Host
Key terms to remembers

A subnet is a smaller portion of large network treated as its own separate network. To
create subnet we borrow bits from host portion and assign them as network bits. This
mean more networks, fewer hosts.
If the network bits on two addresses do not match, then the two packets are intended
for two separate networks.
On a 32 bits IP address at least eight bits must belong to the network portion and at
least 2 bits must belong to the host portion.
Each IP address has a predefined IP class and that cannot be changed.
 Each class has a predefined default subnet mask that tell us the octets, which are
already part of the network portion, as well as how many bits we have available to work
with.
Whatever network class is it, we cannot change those bits that are already assigned.
We cannot assign the network ID and the broadcast address to a host.
Regardless how many bits are left in the host field, network ID and the broadcast
address must be reserved.
Subnet bits start at the left and go to the right, without skipping bits.

CIDR [ Classless Inter Domain Routing]

CIDR is a slash notation of subnet mask. CIDR tells us number of on bits in a network
address.
o Class A has default subnet mask 255.0.0.0. that means first octet of the subnet mask
has all on bits. In slash notation it would be written as /8, means address has 8 bits on.
o Class B has default subnet mask 255.255.0.0. that means first two octets of the subnet
mask have all on bits. In slash notation it would be written as /16, means address has
16 bits on.
o Class C has default subnet mask 255.255.255.0. that means first three octets of the
subnet mask have all on bits. In slash notation it would be written as /24, means
address has 24 bits on.

Method of subnetting
In subnetting we find the answer of following questions.

What is subnet mask for given address?

How many subnets does given subnet mask provide ?
What is block size for given subnet mask?
What are the valid subnets?
What are the total hosts?
How many valid hosts are available per subnet?
What is broadcast address of each subnet?
What is network address of each subnet?

To answer above questions we use following method of subnetting.

What is subnet mask for given address?

Subnetting take places when we extend the default subnet mask. We cannot perform
subnetting with default subnet mask and every classes have default subnet mask. To figure out
subnetted subnet mask ,we first need to write down the default subnet mask. Now find the
host bits borrowed to create subnets and convert them in decimal. For example find the
subnet mask of address 188.25.45.48/20 ? This address belong to class B and class B has
default subnet mask 255.255.0.0[ /16 in CIDR ]. We borrowed 4 bits from hosts portion. As
you know subnetting move from left to right and it cannot skip any network bit. So this subnet
mask in binary would be 11111111. 11111111.11110000.00000000. First two octet have default
value so its decimal value would be 255.255. We will convert third octet in decimal value. To
convert a binary number in decimal we add its decimal equivalent value. In our example it
would be 128+64+32+16+0+0+0+0 = 240. Our fourth octet has all bits off so its decimal
value would be 0+0+0+0+0+0+0+0 =0. Our answer subnet mask would be 255.255.240.0

How many subnets does given subnet mask provide ?

To calculate the number of subnets provided by given subnet mask we use 2 N , where N =
number of bits borrowed from host bits to create subnets. For example in 192.168.1.0/27, N is
3. By looking at address we can determined that this address is belong to class C and class C
has default subnet mask 255.255.255.0 [/24 in CIDR]. In given address we borrowed 27 - 24
= 3 host bits to create subnets. Now 23 = 8, so our answer is 8.

What is block size for subnet mask?

Block size or increment number is used to calculate the valid subnets. Once you figure out the
block size, calculation of valid subnets become pieces of cake. To figure out the block size, use
this formula 256 - Subnet mask = block size. For example block size for subnet mask
255.255.255.240 is 256 - 240 = 16.

What are the valid subnets?

Calculating valid subnet is two steps process. First calculate total subnet by using formula 2 N.
In second step find the block size and count from zero in block until you reach the subnet
mask value. For example calculate the valid subnets for 192.168.1.0/26.
Borrowed host bits are 2 [26-24].
Total subnets are 22 = 4.
Subnet mask would be 255.255.255.192.
Block size would be 256-192 = 64.
Start counting from zero at blocks of 64, so our valid subnets would be 0,64,128,192.

What are the total hosts?

Total hosts are the hosts available per subnet. To calculate total hosts use formula 2 H = Total
hosts. H is the number of host bits. For example in address 192.168.1.0/26 we have 32 - 26
[Total bits in IP address - Bits consumed by network address] = 6. Total hosts per subnet
would be 26 = 64.

How many valid hosts are available per subnet?

Valid hosts are the number of hosts those can be assigned to devices. As we know, we need to
reduce two address per subnet, one for network ID and another for broadcast ID. So our
formula, to calculate valid hosts would be Total hosts -2 = Valid hosts. In above example we
have 64 hosts per subnet, so valid hosts in each subnet would be 64 - 2 = 62.

What is broadcast address of each subnet?

Broadcast address is the last address of subnet. This address is reserve for network broadcast,
and cannot be assigned to any host. In above example
0 Subnet has broadcast address 63
64 Subnet has broadcast address 127
128 Subnet has broadcast address 191
192 Subnet has broadcast address 255

What is the network address of each subnet?

Network address is the first address of subnet. This address is used to locate the network, and
cannot be assigned to any host. In above example address 0,64,128,192 are the network
address.

Network address is always the first IP address of subnet.

Broadcast address is always the last IP address of subnet ( IP address before the next
subnet).
Valid hosts are the IP addresses between network address and broadcast address.

At this point you have powered with all essential tools for subnetting. In last section of this
article we will practically implement what we have learn so far. Due to length of this article I
will include examples only from class C.

Class C Subnetting

Default subnet mask of class C is 255.255.255.0. CIDR notation of class C is /24, which means
24 bits from IP address are already consumed by network portion and we have 8 host bits to
work with. We cannot skip network bit, when we turned them on. Subnetting moves from left
to right. So Class C subnet masks can only be the following:

CIDR Decimal Binary

/25 128 10000000
/26 192 11000000
/27 224 11100000
/28 240 11110000
/29 248 11111000
/30 252 11111100
As we have already discussed earlier in this article that we have to have at least 2 host bits for
assigning IP addresses to hosts, that means we can't use /31 and /32 for subnetting.

/25

CIDR /25 has subnet mask 255.255.255.128 and 128 is 10000000 in binary. We used one host
bit in network address.
 H
Default subnet mask of class C =======
11111111. 11111111. 11111111.10000000
N
N = 1 [Number of host bit used in network]
H = 7 [Remaining host bits]
Total subnets ( 2N ) :- 21 = 2.
Block size (256 - subnet mask) :- 256 - 128 = 128.
Valid subnets ( Count blocks from 0) :- 0,128
Total hosts (2H) :- 27 = 128
Valid hosts per subnet ( Total host - 2 ) :- 128 - 2 = 126

Subnets Subnet 1 Subnet 2

Network ID 0 128
First host 1 129
Last host 126 254
Broadcast ID 127 255

/26

CIDR /26 has subnet mask 255.255.255.192 and 192 is 11000000 in binary. We used two host
bits in network address.

H
Default subnet mask of class C ======
11111111. 11111111. 11111111.11000000
N

N=2
H=6
Total subnets ( 2N ) :- 22 = 4.
Block size (256 - subnet mask) :- 256 - 192 = 64.
Valid subnets ( Count blocks from 0) :- 0,64,128,192
Total hosts (2H) :- 26 = 64
Valid hosts per subnet ( Total host - 2 ) :- 64 - 2 = 62
 Subnets Subnet 1 Subnet 2 Subnet 3 Subnet 4

Network ID 0 64 128 192

First host 1 65 129 193

Last host 62 126 190 254

Broadcast ID 63 127 191 255

/27

CIDR /27 has subnet mask 255.255.255.224 and 224 is 11100000 in binary. We used three
host bits in network address.

H
Default subnet mask of class C =====
11111111. 11111111. 11111111.11100000
N
N=3
H=5
Total subnets ( 2N ) :- 23 = 8.
Block size (256 - subnet mask) :- 256 - 224 = 32.
Valid subnets ( Count blocks from 0) :- 0,32,64,96,128,160,192,224
Total hosts (2H) :- 25 = 32
Valid hosts per subnet ( Total host - 2 ) :- 32 - 2 = 30

Subnet Subnet Subnet Subnet Subnet Subnet

Subnets Subnet1 Subnet7
2 3 4 5 6 8
Network
0 32 64 96 128 160 192 224
ID
First host 1 33 65 97 129 161 193 225
Last host 30 62 94 126 158 190 222 254
Broadcas
31 63 95 127 159 191 223 255
t ID
/28

CIDR /28 has subnet mask 255.255.255.240 and 240 is 11110000 in binary. We used four host
bits in network address.

H
Default subnet mask of class C ====
11111111. 11111111. 11111111.11110000
N
N=4
H=4
Total subnets ( 2N ) :- 24 = 16.
Block size (256 - subnet mask) :- 256 - 240 = 16.
Valid subnets ( Count blocks from 0) :-
0,16,32,48,64,80,96,112,128,144,160,176,192,208,224,240
Total hosts (2H) :- 24 = 16
Valid hosts per subnet ( Total host - 2 ) :- 16 - 2 = 14

"I hope you have understand the pattern of making the subnet
chart with above information's. Let's join me in this practice.
For this example and next two examples I will fill only two
subnets [first and last one], it's your turn to fill the middle
subnets."

Subnet 2 To Subnet
Subnets Subnet 1 15 Subnet 16
(Filled by you)
....................................
Network ID 0 240
......
....................................
First host 1 241
......
....................................
Last host 14 254
......
....................................
Broadcast ID 15 255
.....

/29

CIDR /29 has subnet mask 255.255.255.248 and 248 is 11111000 in binary. We used five host
bits in network address.

H
Default subnet mask of class C ===
11111111. 11111111. 11111111.11111000
 N
N=5
H=3
Total subnets ( 2N ) :- 25 = 32.
Block size (256 - subnet mask) :- 256 - 248 = 8.
Valid subnets ( Count blocks from 0) :-
0,8,16,24,32,40,48,56,64,72,80,88,96,104,112,120,128,136,144,152,160,168,176,184,192,200,
208,216,224,232,240,248
Total hosts (2H) :- 23 = 8
Valid hosts per subnet ( Total host - 2 ) :- 8-2=6

Subnet 2 To Subnet
Subnets Subnet 1 31 Subnet 32
(Filled by you)
....................................
Network ID 0 248
......
....................................
First host 1 249
......
....................................
Last host 6 254
......
....................................
Broadcast ID 7 255
.....

/30

CIDR /30 has subnet mask 255.255.255.252 and 252 is 11111100 in binary. We used six host
bits in network address.

H
Default subnet mask of class C ==
11111111. 11111111. 11111111.11111100
N

N=6
H=2
Total subnets ( 2N ) :- 26 = 64 .
Block size (256 - subnet mask) :- 256 - 252 = 4.
Valid subnets ( Count blocks from 0) :-
0,4,8,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68,72,76,80,84,88,92,96,100,104,108,112,11
6,120,124,128,132,136,140,144,148,152,156,160,164,168,172,176,180,184,188,192,196,200,204
,208,212,216,220,224,228,232,236,240,244,248,252

Total hosts (2H) :- 22 = 4

Valid hosts per subnet ( Total host - 2 ) :- 4-2=2

Subnet 2 To Subnet
Subnets Subnet 1 63 Subnet 64
(Filled by you)
....................................
Network ID 0 252
......
....................................
First host 1 253
......
....................................
Last host 2 254
......
....................................
Broadcast ID 3 255
.....

At the end of this long article I have a small word for you, that is practice. Believe me in exam
you are going to face many questions related to subnetting. More practice will make you more
comfortable in exam.

For more article visit our site

ComputerNetworkingNotes.com