Heres ho to impro e the producti ity of your

discrete parts manufacturing process:

Londonderry, NH USA (603) 434-2300 [email protected]

 The System: ProductionACE

ProductionACE is a practical, proven and affordable system to help you improve the
productivity of your discrete parts manufacturing process. With it you can manage
production, machines, people and OEE in real-time.

The system connects directly to any older, non-communicating production

equipment through a family of Machine/Operator Data Transducers (MDT). For
newer, intelligent equipment, OPC or MTConnect provides the connection.
Either way, you can match your data collection and operator interface requirements
to individual machine characteristics for the most flexible and cost-effective system
available today.

ProductionACE is installed in more than 500 manufacturing facilities of all types and
sizesfrom an eight--machine molder, to many multi-plant Fortune 1000 companies.

2
Machine Data Transducers (MDT) are Operator/Machine Interfaces that collect,
display and transmit real-time data to a remote PCs.
MDTs connect directly to any production machine using the existing electrical signals that operate the
machine: switches/relays, photo/proximity sensors and voltages: 24V-120V AC/DC.

MDTs communicate with remote PCs running Windows Production Manager or Job Manager
software to collect, display, analyze and share data throughout the Enterprise.

MDT-150

MDT-40

Tablet Operator Interface

add-on to MDT-20
MDT-20

MDT-02

3
ProductionACE is a practical, proven and economical means to improve the
productivity of any discrete parts manufacturing process.

Manufacturing Production Reporting: Eliminate manual data collection, transcription.

Monitor Equipment OEE: Track and display machine status to analyze, improve production efficiency.

Analyze Machine Down Time and Rejects: Collect, analyze, eliminate causes for downtime and rejects.

Visual Factory Displays: Inform, empower, motivate Operators and Management with real-time data displayed
on low cost, large screen TV displays.

Production Scheduling: Visual Production Scheduler produces real-world forecasts because it tracks job
progress in real time.

Preventive Maintenance: Schedule Predictive Maintenance based on actual equipment and

tooling/molds/dies run hours and cycle count.

Link ERP and Manufacturing: Link Master Production Schedule to production floor for dynamic
scheduling, accurate Job completion forecasts, automatic inventory and WIP updates.

4
 Eliminate manual data collection and reporting with Report Generator.

Live and printed reports available Enterprise-wide with Crystal Reports, and export to Excel.

User Customized
Screens:
Point and click to
select Data
Elements to be
displayed.

5
Analyze OEE and production performance with Excel and Crystal Reports.

* Wide choice of selection criteria.

* Use standard reports, or make your own with Crystal Reports.
* Export to Excel or other applications.
* Sorting control for multiple levels: For example, by Date, Shift, Product, Machine, Material, etc.

OEE Individual Components

that make up OEE.

6
Identify problems fast, before quality suffers, with real-time OEE displays.

Track OEE, and its components: Availability/Utilization, Yield/Quality and Performance/Std Rate
of individual machines, all machines, or a department/group.

7
Increase uptime, reduce downtime: collect and analyze causes for Downtime and
Rejects with simple, yet powerful graphical tools.

Downtime and Reject Causes can be reported by Machine, Job, Product, Shift, etc.

Use standard, but sophisticated Excel tools like Pivot Tables to summarize and analyze data.

8
Establish benchmarks, set standards, then track your progress with analytical tools.

Historical data can be viewed by user-selected date range from a day to years.
Charts/reports can be run for a single machine, a department, or the entire plant.

9
 Notify managers to potential issues with real-time e-mail alerts .

E-mail notifications can be automatically generated to identify actual or potential problems on the
production floor. Selecting reasons to generate e-mail is a simple check-the-box process. (This
screen is typical, many other trigger reasons are provided).

Typical reasons that trigger e-mail alerts:

* Help call: the e-mail will specify the particular machine requesting the help call.
* Down/Reject Reason occurrence: any time a specific Down or Reject Reason occurs.
* Fast/Slow Rate or Cycle Time: whenever the machine is operating outside limits.
* OEE deviation: if machine, group of machines or department OEE is below user-set limit.
* Shift Schedule change: any time the shift schedule is changed.
* Parts-made-per-cycle change: for example, if a mold cavity has been closed off. 10
 Customizable, web-enabled displays provide plant wide, enterprise wide real-time
data visibility onto any production floor.

Users can point and click to develop their own screens (and reports) like this.

Machine Status:
Green: Running in limits
Yellow: Slow
Blue: Production Hold
Red: Down

11
 Give customers accurate delivery dates with Visual Job Queue.
Job Queue provides a graphical view of production schedule and Job completion time.
It continually monitors actual shop floor activity to provide an accurate Job completion date.
Drag and drop a Job to see effect on
schedule: The System highlights a Job
that wont meet needed date, or if
machine or tooling is already scheduled.

From the MDT-150 or Tablet, the

Operator can select the next job in
the queue, or he can wand-in the
new Job with a bar code wand.

Job completion calculation factors:

1. Production quantity scheduled.
2. Shift production schedule.
3. Performance of current running Jobs.
4. Machine setup/change-over time.
5. Machine and Job-specific efficiencies.
6. Maintenance schedule.

Interface to any ERP/MRPII system.

ERP downloads production requirements
into each machines Job Queue. At Job
or Shift end, production and productivity
data is exported to ERP.
12
Visual Factory Displays: Inform, empower, motivate operator with Andon Displays
at individual machines.

Optional intelligent TV Displays are low cost OEE/productivity scoreboards. More capable
and much less expensive than LED-style Andon Systems that typically cost $3000 or more. Many
standard display formats are available, or build-your-own with a simple software tool we supply.

Call for details and pricing at 603-434-2300.

13
MDT Machine/Operator Interfaces: a choice of capabilities to match machine
functionality means a very economical system.

You can mix all types of Machine Data Transducers (MDT) in the same system.
All models of MDT accept 24V to 120V AC/DC, contact closures and sensor open collector outputs directly from
machine. Below is a brief summary of MDT types capabilities, but following slides will provide more detail.

MDT-02 has no operator interface. It has two direct machine connections for production and direct reject part tracking,
productivity/OEE recording and job tracking. It automatically records two Reasons for downtime. Hard-wired plant floor
communications interface also supplies operating power to MDT-02 for a very low cost installation.

MDT-20 has no display or data entry ability, but can be upgraded with a touch screen Tablet PC operator interface. Has four
machine connections for production and reject part tracking , productivity/OEE recording, an end-of-line output/Case Count.
Automatically records two Reasons for downtime. Choice of wired or wireless Ethernet for plant floor communications.

MDT-40 has operator data display and data entry. Has six direct machine connections for Production counts, Reject counts, Case
Count, automatic downtime tracking (three reasons), or Cycle Start and Cycle Stop (for CNC). Operator enters Reason for 10
downtime and 5 Reject types. Operator a i itiate Jo ha ge fro MDT. Ma hi e lo kout output e sures dow reaso
entry by Operator. Options include three color light tree and wired or wireless Ethernet for plant floor communications.

MDT-150 has operator data display, data entry. Has six direct machine connections for Production counts, Reject counts, Case
Count, automatic downtime tracking (three reasons), or Cycle Start and Cycle Stop (for CNC). Operator enters Reason for 40
downtime and 20 Reject types. Operator can initiate Job change from MDT from keypad or optional Bar Code Scanner Machine
lo kout output e sures dow reaso e try y Operator. Optio s i lude three olor light tree a d wired or wireless Ether et
for plant floor communications.
14
Use the very low cost MDT-02 when no Operator interface is required.

MDT-02 has two Machine Signal Input connections:

One input is connected to machine cycle signal:
This input should be momentarily activated each time one or more
Parts are made/processed.
4 inches

One input can (you select one function at installation):

* Track downtime when input is absent or present
* Count Reject Parts
* Count Filled Cases
MDT-02
Plant Floor Communications: Standard wired (similar to
RS485) where a black box VT-28 Communications
Interface at the PC also supplies operating power to MDT-02
for a very low cost installation..

15
Use the MDT-20 when no operator interface is required and you need wired or
wireless Ethernet communications.

MDT-20 has four Machine Signal Input connections:

One input is connected to machine cycle signal.
This input should be momentarily activated each time one or more
Parts are made/processed.
One input is used for direct input of Reject Part counts.
Can be from automatic inspection/reject station.

One input can be configured as end-of-line Totalizer /Case Count

or automatic Reject input. If you dont have a direct Reject Part
Input, the system can track Rejects by recording difference between
Parts made and the Totalizer/Case Count.

One input senses when the machine is powered down.

This downtime is tracked as a separate Reason from machine
powered up, but not cycling downtime.

Installation is economical: Device is powered by machine power

(120V or 220V AC) and records downtime when machine is off.
5 inches
Plant Floor Communications: wired or wireless Ethernet

16
Tablet PC Operator interface expands MDT-20 functionality

Expand MDT-20 with a low cost touch screen

Tablet PC Operator Interface for a very cost-
effective shop floor control system:
* Operator enters 20 Reasons for Downtime
Machine Lockout * In addition to MDT-20 automatic Reject
Output tracking, Operator enters 20 Reasons/Counts.
* Select next Job in Job Queue from Tablet, or
with Bar Code wand.
* Entering Non-Scheduled Modeneed for OEE
* Track Setup time. MDT can track Parts
made in Setup as rejects.
* Real-time OEE display including components:
Availability, Performance, Quality
* Log on Operator and Maintenance staff for
tracking their performance.
* MDT-20 Machine Lockout is activated when
machine goes down to ensure Operator enters
Reason for down event.
* Custom displays, real-time OEE Dashboards.

17
 Mid-level MDT-40 has operator display and data entry keypad.

MDT-40 has 6 Machine Signal Inputs:

* A machine cycle signal should be momentarily
activated each time a Part(s) is made/processed
* Three inputs for Direct entry into a down reason.
* Automatic Reject Signal
* Case Count

Operator enters through keypad:

* 10 Reasons for Downtime
* 5 Reasons and quantities of Rejects

MDT-40 has four outputs:

* Lockout machine to force Reason entry
* Indicate machine down.
* Indicate machine fast/slow.
* Batch Count.
* Tri-color Light Tree (replaces down/fast/Batch
outputs.

10 inches Communications to system Poller PC

MDT enclosure is heavy gauge steel. options: Standard wired (similar to RS485), or
wired or wireless Ethernet..

18
 MDT-40 has simple operator interface and multiple data displays.

Use Function keys to enter:

* Next Job
* Rejects
* Setup Mode (MDT tracks
Rejects made in Setup)
* Non-scheduled Mode
* Operator Help Call

3 colored Status Indictors:

Red--machine down
Yellow--outside high/low limits.
Green-- Running OK.
Red & Greenin Setup.

When machine goes down

MDT prompts Operator to enter
Reason and tracks the downtime.

Operator uses arrow keys to select Data Functions to Reason keys are labeled with user-
display such as: prepared labels of 10 Down and 5
* Hours to Go to finish Job Reject Reasons specific to each
* Parts to Go to finish Job machine.
* OEE and productivity components that make up OEE
* Rejects Change Reason list at any time: A
* Cycle Time and Rate total of 999 Down and Reject
* Custom Functions Reasons are available in System.
19
The MDT-150 has operator Interface, many Down and Reject reasons.

Operator can enter through keypad:

* 40 Reasons for Downtime
* 20 Reasons and quantities of Rejects

Six electrical inputs for:

* Machine Cycle should be momentarily
activated each time a Part(s)
* 3 inputs for direct tracking of Down Reasons.
* One automatic Reject
* One Case Count

Three or (optionally) four outputs for:

* Lockout machine to force Reason entry
* Indicate machine Fast/Slow
* Batch Count
* 3 color Light Tree (replaces Fast & Batch).

Operator uses Function keys to enter:

* Next Job in Job Queue from keypad or
10 inches
(optionally) a Bar Code Scanner.
* Setup Mode: MDT can track Rejects in Setup.
* Non-Scheduled Mode
* Operator Help Call
* Log on Operator and Maintenance staff to
track their performance.
MDT enclosure is heavy gauge steel.
* Lot Number

20
The MDT-150 has operator Interface, tracks 40 Down and 20 Reject reasons.

Data function and Down

and Reject Reason
menua user-prepared
listing of up to 40 Down and
20 Reject codes specific to
each machine.
A total of 999 Down and
Reject Reasons are Four colored indicators or
available for use in System. light tree for MDT status:
AmberJob changing
Redmachine down
Orangemachine fast, slow
Operator uses arrow or number keys to select Data Functions to
Greenmachine operating within
display such as: high and low limits
* Cycle Time: last cycle and shift average
Red and Green: In Setup
* Production Rate: instantaneous, average, shift average
* OEE and components that make up OEE: Availability,
Performance and Quality.
* Hours to Go to finish Job
* Parts to Go to finish Job Communications to system Poller PC
* Rejects options: Standard wired (similar to
* Run Time, Down Time, Setup Time RS485), or wired or wireless Ethernet.

21
 System architecture makes real-time manufacturing operations visibility and
integration with Enterprise applications as simple as 1 2 3.

A dedicated Poller PC talks to MDTs

connected to each production machine via
1. RS485, wired or wireless Ethernet.

MDT-150

MDT-40
Mobile access via
smartphone. Also alert e-
MDT-02 or mails are automatically sent
MDT-20
22
System architecture makes real-time manufacturing operations visibility and
integration with Enterprise applications as simple as 1 2 3.

Large, low cost TVs

display your choice of
alphanumeric or
graphical data.

Windows User PCs allow

2. managers, supervisors,
and IT department, to
monitor/manage from
A dedicated Poller their PCs.
1. PC talks to MDTs
connected to each
production machine.

23
System architecture makes real-time manufacturing operations visibility and
integration with Enterprise applications as simple as 1 2 3.

Large TVs for real-

time on-machine or
remote displays.

Windows User PCs allow

3. Multi-plant, Enterprise-wide
production, productivity, and

2. managers, supervisors,
and IT department to
performance data access,
integration with ERP, MRPII
and CMMS systems.
monitor/manage from
A dedicated Poller their PCs.
1. PC talks to MDTs
connected to each
production machine.

24
Preventive Maintenance Scheduler replaces ineffectual calendar-based
scheduling with usage-based PM.
PM Scheduler tracks actual Run Time and Cycle Count on machine and up to 99 individual
machine Components, dies, tooling, etc. System alerts users when maintenance is near and
due for machine and each component.
The System can also export equipment Run Time and Cycle Count to any CMMS application.

MDTs collect Cycle Count Export to any third

and Run Time as part of party CMMS/EAM
their normal operation application

25
Most ERP systems have a disconnect when it comes to the shop floor, but now
you can link production operations to any ERP with Advanced ERP Interface

Import ERP production schedule into ProductionACE Job Queue, then track Job
progress in real-time at each machine.
* Simplify and improve Production Scheduling performance.
* Maintain accurate Finished Goods and WIP counts.
* Provide accurate delivery dates.
* Track raw material usage.
* Detect slowdowns, stoppages before productivity suffers.

At end of Shift and Job, export actual production and performance data to ERP.
* Eliminate error prone, manual data collection and data entry.
* Improve Product Costing accuracy.

ERP
A direct link to ALL types of 26
manufacturing machinery.
ProductionACE: Installed worldwide in over 500 manufacturing facilities, from
an eight-machine molder to many large, multi-plant Fortune 1000 operations.

27
Please contact us for a live system Web demo.
(603) 434-2300
[email protected]

28