Scribd
Upload
250 views2 pages

Commissioning Service Department Commissioning Standard Test Formats Description: SPAU 341 C3 AVR RELAY

1) The document is a commissioning test form for a SPAU 341 C3 AVR relay. 2) It includes general information about the relay such as serial number, make, model, ratings, and technical parameters being tested. 3) The form documents the completion of mechanical checks, visual inspections, and electrical tests to verify the relay is functioning properly.

Uploaded by

m kh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
250 views2 pages

Commissioning Service Department Commissioning Standard Test Formats Description: SPAU 341 C3 AVR RELAY

1) The document is a commissioning test form for a SPAU 341 C3 AVR relay. 2) It includes general information about the relay such as serial number, make, model, ratings, and technical parameters being tested. 3) The form documents the completion of mechanical checks, visual inspections, and electrical tests to verify the relay is functioning properly.

Uploaded by

m kh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Commissioning Service

Department
Commissioning Standard Test
Formats
Description: SPAU 341 C3 AVR RELAY ITEM No. :
Bay no.: Drawing ref.: Sheet : 1 of 2
Contractor : Contract no.: Substation No :

1 GENERAL INFORMAYION :

Serial No. Rated Voltage 100/110/120 VAC


Make Aux. Voltage 80 265 VAC/DC
ORDER NO. RS 454 004 - AA MODEL NO. SPAU 341 C3
Frequency 60 Hz VT Ratio 13.8 kV/120V
Rated Current 5A CT Ratio 2510/1A

Reference Voltage Us Ud = Um - Up
Bandwidth Us Up = Us Uz Uci = Urev
Time delay T1 Us = Reference Voltage
Time delay T2 Uz = Line Drop
Compensation
Overcurrent blocking I> Uci = Circulating Current
compensation
Undervoltage blocking U< Urev = Reduce Set Voltage
value
Overvoltage detection U> Ud = Difference Voltage
Ur line drop compensation Up = Control Voltage
Ux line drop compensation
Checksum of switchgroup SGF1
Checksum of switchgroup SGF2
Reduce Set Voltage (RSV)

2 MECHANICAL CHECKS AND VISUAL INSPECTION:

ITEM DESCRIPTION CHECKED


1 Inspect for physical damage / defects.
2 Check tightness of all connections.
3 Test Switch checked for correct function.
4 Watchdog contact.

3 ELECTRICAL TESTS: With relay energized condition

ITEM DESCRIPTION CHECKED


1 Measured auxiliary supply.
5 Relay healthy (green) LED working.
6 OUT (Yellow) LED working.
Tested by: ENG. Witnessed by: ENG.

Signature & Date: Signature & Date:


Commissioning Service
Department
Commissioning Standard Test
Formats
Description: SPAU 341 C3 AVR RELAY ITEM No. :
Bay no.: Drawing ref.: Sheet : 2 of 2
Contractor : Contract no.: Substation No :

AL-BABTAIN

Tested by: ENG. Witnessed by: ENG.

Signature & Date: Signature & Date:

You might also like