Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time
Halliburton Light Cement
(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time
Halliburton Light Cement
(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time
Halliburton Light Cement
(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time
Halliburton Light Cement
(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time
Halliburton Light Cement
(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time
Halliburton Light Cement
(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time

Halliburton Light Cement

(HLC)
Description and Primary Function: Halliburton
Light Cement (HLC) is a blend of cement, POZMIX
A, and bentonite. HLC is a filler-type cementing
composition used in high column cementing or
where hole conditions do not require critical cement
slurries.
Secondary Effects: HLC has variable density and is
economical.
Interaction with Other Additives: It is compatible
with most additives.
Safety and Handling Procedures: Avoid inhaling
dust and getting dust in eyes. Wash skin with soap
and water. Flush eyes with plenty of water.
Properties:
Additive: HLC
Form: powder
Color: gray
How Packaged: bulk blended
Bulk Density: 87 lb/cu ft
Water Requirement: variable
Absolute Volume: 0.0414 gal/lb
Normal Range of Use in Wells:
Temperature: 80F to 230F (27C to 110C) Adding
SSA-1 or SSA-2 increases temperature range to
400F (204C).
Concentration: 65% cement, 35% POZMIX A, and
6% bentonite
Special Information:
Usage Restrictions: It is not recommended as a
completion cement.
Effect on Slurry Properties:
1. decreases density and strength
2. increases the amount of water needed for mixing
and thickening time