Scribd Logo
Upload

Welcome to Scribd!

  • 99 views

    Solar Spotlight With Led Bulbs: Model

    Uploaded by

    jollyrosegonzales
    yes

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Solar Spotlight With Led Bulbs: Model

    Uploaded by

    jollyrosegonzales
    99 views6 pages
    yes

    Original Title

    95388

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    yes

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    99 views6 pages

    Solar Spotlight With Led Bulbs: Model

    Uploaded by

    jollyrosegonzales
    yes

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 6

    solar spotlight with led

    bulbs
    Model 95388
    Assembly And Operation Instructions

    Due to continuing improvements, actual product may differ slightly from the product described herein.

    3491 Mission Oaks Blvd., Camarillo, CA 93011


    Visit our website at: http://www.harborfreight.com

    To prevent serious injury, read and understand


    all warnings and instructions before use.
    Copyright 2006 by Harbor Freight Tools. All rights reserved. No portion of this
    manual or any artwork contained herein may be reproduced in any shape or form
    without the express written consent of Harbor Freight Tools.
    For technical questions or replacement parts, please call 1-800-444-3353.
    Specifications
    High impact ABS housing, monocrystalline solar
    Material/Construction
    panel
    Overall Dimensions 6-1/4 L X 3-5/16 W X 12-5/8 Thick
    (2) Ni-Cd AA, 600 mAh, 1.2V rechargeable
    Power Source
    batteries
    Run Time On Fully Charged
    8-12 hours
    Batteries
    Light Intensity 9000-12000 MCD
    Solar Panel 4V/70 mA

    You will need this manual for the safety warnings and precautions, assembly, oper-
    ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
    Keep your invoice with this manual. Write the invoice number on the inside of the front
    cover. Keep this manual and invoice in a safe and dry place for future reference.

    GENERAL SAFETY RULES


    1. Keep your work area clean and well lit. Cluttered benches and dark areas invite ac-
    cidents.

    2. Keep children away while assembling and working with the Solar Spotlight. Do not
    let them handle the Solar Spotlight.

    3. Stay alert. Watch what you are doing, and use common sense when operating the Spot-
    light. Do not assemble while tired or under the influence of drugs, alcohol, or medication.
    A moment of inattention while operating this tool may result in serious personal injury.

    4. Dress properly. Protective, electrically nonskid footwear are recommended when working
    with the Solar Spotlight. Wear restrictive hair covering to contain long hair.

    5. Keep proper footing and balance at all times. Proper footing and balance enables better
    control of the tool in unexpected situations.

    6. Store idle tools out of reach of children and other untrained persons. Tools are dan-
    gerous in the hands of untrained users.

    7. Always wear ANSI-approved goggles when assembling and working with this prod-
    uct.

    8. Always check hardware and assembled parts after assembling. All connections should
    be tight and hardware tightened.

    9. Maintain products with care. Keep the Solar Spotlights clean for better and safer per-
    formance. Inspect the Solar Spotlights periodically. If damaged, have it repaired by an
    qualified technician.

    10. Keep the Solar Panel free of dirt, dust and grime. Dust covering the Solar Panel will block
    out sunlight causing a decrease or stoppage of efficiency in recharging the batteries.

    SKU 95388 For technical questions, please call 1-800-444-3353. Page 


    11. WARNING: NiCd batteries must be disposed of properly. Do not incinerate. Batteries
    may burst, causing personal injury and/or property damage. Contact your local hazardous
    waste disposal authority for proper disposal.

    12. People with pacemakers should consult their physician(s) before using this product. Elec-
    tromagnetic fields in close proximity to a heart pacemaker could cause interference to or
    failure of the pacemaker.

    Unpacking
    When unpacking, check to make sure that the item is intact and undamaged. If any
    parts are missing or broken, please call Harbor Freight Tools at the number shown on the
    cover of this manual as soon as possible.
    Assembly and operating Instructions
    Note: For additional information regarding the parts listed in the following pages, refer to the As-
    sembly Diagram near the end of this manual.

    1. WARNING! Make sure the Power Button at the back of the Lamp Housing (5) is in its
    OFF position before making any adjustments to the Spotlight. See Figure 1.

    2. Decide where you want to place the Solar Spotlight. Choose a location that receives full,
    direct sunlight a minimum of six hours a day. The location should not be near nighttime
    light sources such as porch lights or streetlights as this may trigger the lights to turn off or
    flicker.

    3. The Solar Spotlight will need to charge for at least 6 hours before using it for the first
    time.

    4. The light is powered by two AA batteries. For directions on how to replace the batteries,
    refer to the Replacing the Batteries section on the following page.

    Figure 1

    Power Button
    Lamp Housing (5)

    5. Press the Power Button to the On position-see Figure 1.


    6. Pressing the Power Button will automatically turn on the Solar Spotlight during the
    night. After the initial charge is set, check to see that the LED Lights (2) are on by
    viewing the light at night or in a dark location.

    SKU 95388 For technical questions, please call 1-800-444-3353. Page 


    Note: During the day, the Solar Panel converts sunlight into electricity, recharging the
    batteries. The amount of light the Solar Panel receives depends on placement of
    the Solar Spotlight, geographic location and weather. If the weather is cloudy and
    the panel did not receive a full charge, the Solar Spotlight may not achieve the full
    hours of operating time. It will catch up on its own after two to three days of full
    sun.
    Inserting the Ground Stake (11):
    1. Insert the Connecting Shaft Screw (7) into the hole on the Connecting Shaft (6).
    Slide the Connecting Shaft 2 (9) onto the Shaft Screw (7) so that Connecting Shaft
    (6) and Connecting Shaft 2 (9) are fitted together. Thread on Nut (10) to secure in
    place.
    2. Insert Ground Stake (11) up into the Connecting Shaft 2 (9).
    3. Warning: Before inserting the Solar Spotlight into the ground, make certain to
    choose an area where there are no underground pipes, cables or other obstructions.
    Make certain that the ground is soft enough to accept the Ground Stake (11). Gently
    insert the Ground Stake (11) into the ground making certain that it is in solid. Make
    certain that the Stake is completely inserted into the ground to assure full stability
    for the Solar Spotlight.
    4. The Lamp Housing (5) rotates up and down to obtain the best lighting situation.
    The Solar Panel (1) pivots on a ball and can be set to a number of different angles
    to obtain the best angle for solar power.

    REPLACING THE BATTERIES


    1. It is recommended that you replace the batteries every 12 months. Before perform-
    ing any maintenance on the Spotlight, make certain that the Power Button is in the
    OFF position.
    2. To access the batteries, twist the Lamp Cover (22) and remove it from the Lamp
    Housing (5). Then remove the Transparent Cover (21) and Reflecting Bowl (20)
    from the Housing (5). The Battery Housing (17) and Batteries (16) are attached to
    the Reflecting Bowl (20). See Figure 2, next page.
    3. Remove the old Batteries (16). Make certain that the new batteries are AA , Ni-Cd
    rechargeable. Install the new batteries into the Battery Housing (17). Make certain
    that the batteries are placed according to the correct polarity. Insert the Battery
    Housing (17) and Reflecting Bowl (20) back into the Lamp Housing (5). Place the
    Transparent Cover (21) back over the Reflecting Bowl (20) and screw the Lamp
    Cover (22) back over the Lamp Housing (5).

    SKU 95388 For technical questions, please call 1-800-444-3353. Page 


    Lamp Cover (22)

    Figure 2 Reflecting Bowl (22)

    Batteries (16)

    Maintenance
    1. Clean regularly with a damp towel. Do not use any type of solvent for cleaning. Do
    not put too much pressure on the light or components while cleaning. Dry thor-
    oughly.

    Parts list

    Part Description Qty Part Description Qty


    1 Solar Panel 1 12 Button Cover 1
    2 Solar Panel Frame 1 13 Power Button 1
    3 Screw 1 2 14 Circuit Board 1
    4 Rotation Bracket 2 15 C i r c u i t B o a r d 1
    Screw
    5 Lamp Housing 1 16 Batteries 2
    6 Connecting Shaft 1 1 17 Battery Housing 1
    7 Connecting Shaft Screw 1 18 Screw 3 1
    8 Screw 2 1 19 LED 3
    9 Connecting Shaft 2 1 20 Reflecting Bowl 1
    10 Nut 1 21 T r a n s p a r e n t 1
    Cover
    11 Ground Stake 1 22 Lamp Cover 1

    SKU 95388 For technical questions, please call 1-800-444-3353. Page 


    PLEASE READ THE FOLLOWING CAREFULLY
    The manufacturer and/or distributor has provided the parts list and assem-
    bly diagram in this manual as a reference tool only. Neither the manufacturer
    or distributor makes any representation or warranty of any kind to the buyer
    that he or she is qualified to make any repairs to the product, or that he or
    she is qualified to replace any parts of the product. In fact, the manufacturer
    and/or distributor expressly states that all repairs and parts replacements
    should be undertaken by certified and licensed technicians, and not by the
    buyer. The buyer assumes all risk and liability arising out of his or her repairs
    to the original product or replacement parts thereto, or arising out of his

    ASSEMBLY DIAGRAM

    SKU 95388 For technical questions, please call 1-800-444-3353. Page 

    You might also like