Scribd
Upload
116 views33 pages

Traverse Survey: Lecture - 3

The document discusses how to calculate the area of a closed traverse using the Double Meridian Distance (DMD) method. It explains that the DMD of each line is equal to the DMD of the previous line plus the departures of the previous and current lines. It provides an example calculation using the latitudes and departures provided for each line of a closed traverse. The total area is calculated as half the sum of the DMD multiplied by the latitude for each line.

Uploaded by

Bishwajit Chowdhury
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
116 views33 pages

Traverse Survey: Lecture - 3

The document discusses how to calculate the area of a closed traverse using the Double Meridian Distance (DMD) method. It explains that the DMD of each line is equal to the DMD of the previous line plus the departures of the previous and current lines. It provides an example calculation using the latitudes and departures provided for each line of a closed traverse. The total area is calculated as half the sum of the DMD multiplied by the latitude for each line.

Uploaded by

Bishwajit Chowdhury
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 33

TRAVERSE SURVEY(CONTD)

Lecture - 3
Fore and Back Bearing:
Every line has two bearings, one observed at each
end of the line. The bearing of the line which is the
direction of the progress of survey is called fore or
forward bearing (F.B), while its bearing in the
opposite direction is known as back or reverse
bearing (B.B).
It may be noted that the fore and back bearings of
a line differ exactly by 180o. In the whole circle
bearing system, the back bearing of a line may be
obtained from the fore bearing by using the
following relation:
Back Bearing = Fore Bearing 180o
Fore and Back Bearing

When the fore bearing is less than 180o, then use


plus sign, and if it exceeds 180o, use minus sign.

In the quadrantal bearing system, the fore and


back bearings are numerically equal but with
opposite letters. For example, if the fore bearing
of a line is N 40o 25 E, then the back bearing of a
line is S40o25W.
To find Back Bearing from Fore Bearing

Qn: Fore bearing of Line PQ is 38o15, find Back bearing.

Back Bearing =218o15

38o15

P
To find Back Bearing from Fore Bearing

Qn: Fore bearing of Line RS is 210o15 find the back


bearing.
R

210o15

Back Bearing =30o30

S
Conversion of FB to BB:
WCB System

Quadrantal Bearing System

Examples

Problems in Book
Local Attraction, Dip and Magnetic
Declination:
The magnetic needle is deflected from its normal
position when it is under the influence of external
attractive forces (called the sources of local
attraction). Such a disturbing influence in known as
local attraction. The term is also used to denote the
amount of deviation of the needle from its normal
position.
If the needle is perfectly balanced before
magnetization, it remains in horizontal position. But it
will not remain in the same position after it is
magnetized, on account of the magnetic influence of
the earth. It will be inclined downwards the pole.
Local Attraction, Dip and Magnetic
Declination:
The inclination of the needle with the horizontal is
known as dip of the needle. The amount of dip is
not constant, but varies in different parts of the
earth. It is 0o at the equator and 90o at the
magnetic poles.
The magnetic meridian at a place does not
coincide with the true meridian at that place
except in few places.
The horizontal angle which the magnetic
meridian makes with the true meridian is known
as magnetic declination or simply declination.
Calculation of Angles from Bearings:
When the bearings are given in WCB
When given bearings of the two lines are RB
1. When both the lines lie in the same quadrant
2. When both the lines are on the same side of
different poles
3. When the lines are on different sides of different
poles.
4. When the lines are lying on different side of same
pole.

Examples
Calculated Bearing:
Bearings observed in the field with the help of magnetic
compass are called observed bearings of that line.

If we measure the angle between this line and another


line at this point of intersection, the bearings of second
line can be calculated, which is called the calculated
bearing of second line.
Problem:
A,B,C,D and E are five survey stations of an closed
traverse. Following are the interior angles :
A = 78o 10' 40''
B = 165o 30' 20''
C = 85o 10' 20''
D = 120o 45' 20''
E = 90o 18' 20''
If the observed bearing of AB is 110o 20' 40'', then
compute the bearings of remaining sides?
Solution
Since observed bearing of AB is 110o 20' 40'' and we have
to find bearings of:
BC, CD, DE, & EA.

Bearing of BC = Bearing of BA + angle ABC


= B.B of BA + angle ABC
= F.B of AB 180o + angle ABC
= 110o 20' 40'' + 180o + 165o 30' 20''
= 455o 51' > 360o
= 95o 51' (i.e. 455o 51' 360o )
Solution
Bearing of CD = Bearing of CB + angle BCD
= B.B of CB + angle BCD
= F.B of BC 180o + angle BCD
= 95o 51' + 180o + 85o 10' 20''
= 361o 1' 20'' > 360o
= 1o 1' 20'' (i.e. 361o 1' 20'' 360o)

Bearing of DE = Bearing of DC + angle CDE


= B.B of DC + angle CDE
= F.B of CD 180o + angle CDE
= 1o 1' 20'' + 180o + 120o 45' 20''
= 301o 46' 40''
Solution
Bearing of EA = Bearing of ED + angle DEA
= B.B of ED + angle DEA
= F.B of DE 180o + angle DEA
= 301o 46' 40'' 180o + 90o 18' 20''
= 212o 5' 0''
Latitude

It is a projection of a line parallel to the meridian

OR

Latitude of a line is the length of its projection along the


meridian

AB' is the latitude of AB.


Lat. (ab) = Lcos
Departure
Departure of a line is the length of its projection along a
line perpendicular to meridian

AB'' is the departure of AB.


Dep. (ab) = Lsin
Problem:
Calculate the latitude & departure from the following
observations?

LINE LENGTH (L) BEARINGS () BEARINGS IN LATITUDE DEPARTURE


W.C.B Lcos Lsin

AB 522.1 N 43o 50' E 43o 50'

BC 560.0 N 35o 20' E 35o 20'

CD 385.0 N 75o 30' W 284o 30'

DA 360.0 S 60o 30' W 240o 30'


Solution
LINE LENGTH (L) BEARINGS () BEARINGS IN LATITUDE DEPARTURE
W.C.B Lcos Lsin

AB 522.1 N 43o 50' E 43o 50' --do-- --do--

BC 560.0 N 35o 20' E 35o 20' --do-- --do--

CD 385.0 N 75o 30' W 284o 30' --do-- --do--

DA 360.0 S 60o 30' W 240o 30' --do-- --do--


CLOSING ERROR OR ERROR OF
ENCLOSURE:
When there is a gap between the starting point of the first
line and the finishing point of last line. This gap is called
the error of enclosure.
Problem:
Following data was calculated in connection with a closed
traverse PQRS.

LINE LENGTH (L) BEARINGS ()

PQ 782 140o12'

QR 1980 36o24'

RS 378 338o48'

SP ? ?

Calculate the missing length & bearing of SP?


Solution
LINE LENGTH (L) BEARINGS () LATITUDE DEPARTURE
Lcos Lsin

PQ 782 140o12' -600.797 500.565

QR 1980 36o24' 1593.689 1174.969

RS 378 338o48' 352.418 -136.694

SP ? ? Lat.(sp) Dep.(sp)
= 1345.31 + = 1538.84 +
Lat.(sp) Dep.(sp)

Now;
Lat. (sp) = -1345.31
& Dep. (sp) = -1538.84
Solution
Since we know that:

Length of SP = ( Lat.)2 + ( Dep.)2


OR Length of SP = (Lat.(sp))2 + (Dep.(sp))2

Thus on substituting the vales in the above equation, we


get;
Length of SP = 2043.988
Also;
= tan-1 ( dep. / Lat.) = tan-1 (1538.84 / 1345.31)
* S W = 48o50'20''
Solution
In W.C.B, we have
= 180o + 48o50'20''
= --do--

*NOTE:

Why we have written S W and not only , because


value of SP-Latitude is negative and we know that south
& west directions are taken as negative.
AREA OF A CLOSED TRAVERSE BY (D.M.D)
METHOD:
D.M.D stands for Double Meridian Distance

Area = (longitude latitude)

2 Area = 2 (Longitude Latitude).


= (2 Longitude Latitude).
= (2 M.D latitude).
= (D.M.D latitude).

Area = (D.M.D latitude).


Longitude:
Longitude (or meridian distance) of a line is the
perpendicular distance from a convenient meridian to the
center of the line.

The most convenient meridian for any particular close


traverse is the North-South line passing through the most
westerly station of the traverse.
AREA OF A CLOSED TRAVERSE BY (D.M.D)
METHOD:
In closed traverse ABCDA, A'1 and B'1 are the mid points of sides
AB & BC respectively.

A1 and B1 are the foots of perpendicular from A'1 and B'1 on the
Meridian.

Meridian distance or longitude of AB = A1A'1 = (departure of


AB).

D.M.D of AB = Departure of AB

(M.D) Longitude of BC = B1B'1 = A1A'1 + A'1B' +B'B''1


= M.D of AB + Departure of AB +
Departure of BC.
AREA OF A CLOSED TRAVERSE BY (D.M.D)
METHOD:
DMD of BC = DMD of AB + Dep. of AB + Dep. of BC

Similarly, we can prove that:

DMD of CD = DMD of BC + Dep. of BC + Dep. of CD

So;
In general we have:

DMD of nth line = DMD of (n-1) th line + Dep. of (n-1) th line + Dep. of
nth line.

DMD of last line is equal to the departure of that line but with the
opposite sign.

Area = (DMD latitude).


Problem:
Following are the latitudes and departures of a closed
Traverse ABCDA. Calculate the area enclosed by DMD
method?
Solution:
Line Latitude Departure DMD DMD
Latitude
AB -375.98 362.2 362.2 -136179.956
BC 456.82 323.87 1048.27 478870.70
CD 96.40 -372.74 999.4 963421.16
DA -177.27 -313.33 313.33 -55544.0091
Solution
Area = (D.M.D latitude).
= (383488.8949)

Area = 191744.4475

*Hint:
323.87 + 362.2 + 362.2 = 1048.27

You might also like