Scribd
Upload
67 views2 pages

Reactive Power Compensation-Transformer Paralleling

This document contains a table with tap settings for two transformers (TRF-1 and TRF-2) and the corresponding differential voltage and reactive power compensation. It shows how the differential voltage and reactive power compensation change as the tap settings are increased from 0% to 10% in increments of 2.5% for TRF-1 only, and from 10% to 10% with additional tap changes of -1.25% and -2.5% for TRF-2. The values are slightly different than reported elsewhere due to being obtained from a computer simulation.

Uploaded by

balaeee123
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
67 views2 pages

Reactive Power Compensation-Transformer Paralleling

This document contains a table with tap settings for two transformers (TRF-1 and TRF-2) and the corresponding differential voltage and reactive power compensation. It shows how the differential voltage and reactive power compensation change as the tap settings are increased from 0% to 10% in increments of 2.5% for TRF-1 only, and from 10% to 10% with additional tap changes of -1.25% and -2.5% for TRF-2. The values are slightly different than reported elsewhere due to being obtained from a computer simulation.

Uploaded by

balaeee123
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

P Power 75

XT Impedance 0.118
IB Base current 1312.1981944153

Tap (%) Differential Voltage (%) Differential Voltage (pu)


S.no
TRF-1 TRF-2 V V
1 0 0 0 0
2 1.25 0 1.25 0.0125
3 2.5 0 2.5 0.025
4 3.75 0 3.75 0.0375
5 5 0 5 0.05
6 6.25 0 6.25 0.0625
7 7.5 0 7.5 0.075

8 8.75 0 8.75 0.0875

9 10 0 10 0.1

10 10 -1.25 11.25 0.1125

11 10 -2.5 12.5 0.125

Note
Values are slightly different than in the article (Table-2), since it is obtained from computer simulation (which takes the exac
MVA
pu
Amps

Circulating current (A) Reactive power compensation (MVAr)


Ic Q
0 0
69.5020230093 0.0496557203
139.0040460186 0.1986228814
208.5060690279 0.4469014831
278.0080920371 0.7944915254
347.5101150464 1.2413930085
417.0121380557 1.7876059322

486.514161065 2.4331302966

556.0161840743 3.1779661017

625.5182070836 4.0221133475

695.0202300928 4.9655720339

d from computer simulation (which takes the exact impedance values at that tap position for calculation)

You might also like