Scribd
Upload
25 views1 page

Procedure For Making Project

Building electronics projects requires following instructions carefully and having the proper tools. The workbench should be comfortable and equipped with a soldering iron, pliers, wire cutters, screwdrivers, nuts, bolts, and electrical tape. Soldering involves melting an alloy onto metal parts to join them firmly together.

Uploaded by

Bhartendu Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
25 views1 page

Procedure For Making Project

Building electronics projects requires following instructions carefully and having the proper tools. The workbench should be comfortable and equipped with a soldering iron, pliers, wire cutters, screwdrivers, nuts, bolts, and electrical tape. Soldering involves melting an alloy onto metal parts to join them firmly together.

Uploaded by

Bhartendu Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

PROCEDURE FOR MAKING PROJECT

Building project in the proper manner is really an art, something


that must be practiced and learned through trial and error. It is not
all that difficult. The main thing is to remember to take each step
slowly and carefully according to the instructions giving making
since that everything at it should be before proceeding further.

TOOLS: The electronics workbench is an actual place of work


with comfortably and conveniently and should be supplied with
compliment of those tools must often used in project building.
Probably, the most important device is a soldering tool. Other tool
which should be at the electronic work bench includes a pair of
needle nose pliers, diagonal wire cutter, a small knife (blade), an
assortment of screw driver, nut driver, few nuts and bolts, electrical
tape, plucker, etc. diagonal wire cutter will be used to cut away any
excess lead length from copper side of P.C.B. and to cut section of
the board after the circuit is complete. The needle nose pliers are
most often used to bend wire leads and wrap them in order to form
a strong mechanical connection.

MOUNTING AND SOLDERING: Soldering is a process of


joining together two metallic parts. It is actually a process of
function in which an alloy, the solder, with a comparatively low
melting point penetrates the surface of the metal being joined and
make a firm joint between them on cooling and solidifying. Before
discussing the way of proper soldering, we should know the
complete kit of soldering station.

You might also like