Scribd
Upload
364 views1 page

Graesser Extractor

This document provides specifications for a horizontal cylindrical extraction vessel including: - It is designed for extracting organics from an aqueous solution and mixed phase at temperatures up to 100°C and pressures up to 3.5 kg/cm2. - The vessel has a 5.25 kg/cm2 hydrotest pressure and is constructed of SA 515 GR 60 steel with internal coils of an unspecified material. - It has 9 nozzles ranging from 40-50mm in diameter for inlets, outlets, drains and spares.

Uploaded by

sushant_jhawer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
364 views1 page

Graesser Extractor

This document provides specifications for a horizontal cylindrical extraction vessel including: - It is designed for extracting organics from an aqueous solution and mixed phase at temperatures up to 100°C and pressures up to 3.5 kg/cm2. - The vessel has a 5.25 kg/cm2 hydrotest pressure and is constructed of SA 515 GR 60 steel with internal coils of an unspecified material. - It has 9 nozzles ranging from 40-50mm in diameter for inlets, outlets, drains and spares.

Uploaded by

sushant_jhawer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

SPECIFICATION VESSELS AND TANKS

DESCRIPTION GRAESSER EXTRACTOR TYPE HORIZONTAL CYLINDRICAL VESSEL


DESIGN CODE GOOD ENGINEERING PRACTICE EQUIP NO. V - 107

CONTENT Organics (Liq) + Aqeous Solution + Mixed phase


CAPACITY
WORKING (LITER)
SERVICE DATA TOTAL (LITER) SHELL INTERNAL COIL

NORMAL / MAX OPERATING PRESS Kg / cm2) 0.1 NA


NORMAL / MAX OPERATING TEMP (C) 50 NA

DESIGN PRESSURE (Kg/cm2) 3.5


DESIGN TEMPERATURE ( C) 100
SHELL CLOSURE TYPE (END) FLAT
SHELL CLOSURE TYPE (END) FLAT
CORROSION ALLOWANCE mm 3
DESIGN DATA JOINT EFFICIENCY 0.7
RADIOGRAPHY (%) Nil
STRESS RELIEVE Nil
TEST PRESSURE (HYDRO / PNEU) (Kg/cm2) 5.25
WELDING PROCEDURE SMAW
SUPPORT ARRANGMENT 3 NOS OF SADDLE

SHELL SA 515 GR 60 NOZZLE SA 106 GR B FLANGE SA 105


MATERIAL OF INTERNAL COIL NA NOZZLE NA FLANGE NA
CONSTRUCTION SHELL CLOSURE SA 515 GR 60 COIL SUPPORT NA
SUPPORTS ISMA - 75 BOLTS & NUTS A 193 GR B GASKET CAF

SHELL
DIMENSIONS
INTERNAL COIL NA

PAINTING Two Coats of Red Oxide Primer on exterior


INSULATION CLEATS, RINGS Not Required
OTHERS INSPECTION
OTHER ACCESSORIES BY VENDOR Name Plate, Lifting Lugs, Earthing Boss

NOZZLES SCHEDULE
NOZZLE SERVICE FLANGE NOZZLE NECK NOM SIZE
REMARKS
NO QTY STD RTG TYPE SCH PROJ (mm)
N1 1 Aqueous inlet B 16.5 150 RF 40 150 50
N2 1 Organic outlet B 16.5 150 RF 40 150 50
N3 1 Mixed Phase out B 16.5 150 RF 40 150 50
N4 1 Organic Inlet B 16.5 150 RF 40 150 50
N5 1 Spare B 16.5 150 RF 40 150 40
N6 1 Spare B 16.5 150 RF 40 150 40
N7 1 Drain B 16.5 150 RF 40 150 50
N8 1 Spare B 16.5 150 RF 40 150 40
N9 1 Spare B 16.5 150 RF 40 150 40

You might also like