Item Description Unit Quantity Rate Amount

WORK BELOW LOWEST FLOOR FINISH

EXCAVATION AND EARTHWORK

EXCAVATION

Excavating to reduce level; commencing from formation level; cart away,

deposit, spread and level where directed within the site

A Maximum depth not exceeding 1.00m M3 54

Excavating trenches starting from reduced level; including backfill with

approved excavated material, compaction in layers and disposal of
surplus excavated material where directed within the site

To receive strip foundation

B Maximum depth not exceeding 1.00m M3 1

To receive ground beams

C Maximum depth not exceeding 1.00m M3 25

FILLING

Hardcore as specified

D To make up levels not exceeding 250mm thick; average 150mm thick M2 154

E To receive strip footings M2 1

CONCRETE WORK

IN-SITU CONCRETE

Plain Concrete Grade 7 as specified; blinding screed; laid on earth or

Under strip footings

F Not exceeding 100mm thick M3 1

Under ground beam

G Not exceeding 100mm thick M3 2

Under ground floors slab

H Not exceeding 100mm thick M3 8

Reinforced Concrete Grade 30 as specified

Foundations or the likes;

J In strip footings M3 1

K In column stumps M3 3

Ground Beams or the likes;

L In ground beams M3 21

Bed and Ground Floor Slab or the likes;

In ground floor slab

M 100mm - 150mm Thick M3 23

To Collection
Item Description Unit Quantity Rate Amount

WORK BELOW LOWEST FLOOR FINISH (Contd)

CONCRETE WORK (Contd)

Reinforcement bars; hot rolled plain round mild steel

Foundations or the likes;

In strip footings

A 10mm Diameter; straight and bent KG 56

In column stumps

B 10mm Diameter; links or the likes KG 90

Ground beams or the likes;

In ground beams

C 10mm Diameter; stirrups or the likes KG 770

Reinforcement bars; hot rolled deformed high tensile steel

Foundations or the likes;

In column stumps

D 16mm Diameter; straight and bent KG 191

E 25mm Diameter; straight and bent KG 535

Ground beams or the likes;

In ground beams

F 16mm Diameter; straight and bent KG 561

G 20mm Diameter; straight and bent KG 1393

H 25mm Diameter; straight and bent KG 560

Reinforcement; fabric; hard drawn plain round steel, welded as

Slab or the likes

J In ground floor slab; Reference A193 M2 309

Class F1 formwork as specified

Foundations or the likes

To sides of strip footings

K 250mm - 500mm High M 2

L To sides of column stumps M2 44

Ground beams or the likes

To edges and faces ground beams

M 250mm - 500mm High M 169

WATERPROOFING AND ASPHALT WORK

DAMP PROOFING AND TANKING

Damp Proof Membrane as specified

Coverings; 1 layer of Polythene sheet as specified, 0.125mm thick; laid

N Over 300mm wide; flat; subsequently covered M2 154

To Collection
Item Description Unit Quantity Rate Amount

Collection

WORK BELOW LOWEST FLOOR FINISH

B1/1

B1/2

To Summary
Item Description Unit Quantity Rate Amount

RAMPS, APRON AND PERIMETER DRAINS

EXCAVATION AND EARTHWORK

EXCAVATION

Excavating to reduce level; to formation level; commencing from ground

A Maximum depth not exceeding 1.00m M3 23

FILLING

Hardcore as specified

To make up levels not exceeding 250mm thick; average 150mm thick

B To receive apron slab M2 76

CONCRETE WORK

IN-SITU CONCRETE

Plain Concrete Grade 7 as specified; blinding screed; laid on earth or

Under apron slab

C Not exceeding 100mm thick M3 4

Reinforced Concrete Grade 30 as specified

Slabs or the likes;

In apron slab

D 100mm - 150mm Thick M3 11

Reinforcement; fabric; hard drawn plain round steel, welded as

Slab or the likes

E In apron slab; Reference A193 M2 152

DRAINAGE

DRAINS

PERIMETER DRAIN

230mm insitu concrete as specified glazed ware half round perimeter

drain, cast in suitable length, finished fair on exposed surfaces, bedded,
jointed and pointed in cement mortar (1:3) on and including 50mm thick
sand bedding, 450mm x 100mm thick reinforced concerete bed and
concrete haunching, raised both sides with 100mm thick reinforced
concrete wall rebated edge to receive 75mm thick reinforced concrete
plank including non-woven geotextile or equivalent filter cloth, 100mm
thick layer of single size 25 coarse aggregate and 100mm thick layer of
well graded river pebbles 25 to 50 grain size and all necessary
excavation, formwork, junctions and ends and remove surplus
excavated materials as per drawing no HQA (98) A208 / C6 (SBH)/
F Average invert not exceeding 600mm deep ( Provisional) M 71

To Summary 0
Item Description Unit Quantity Rate Amount

FRAME

CONCRETE WORK

IN-SITU CONCRETE

Reinforced Concrete Grade 30 as specified

Columns or the likes;

A In columns M3 6

Beams or the likes;

B In floor beams M3 15

C In roof beams M3 13

Reinforcement bars; hot rolled plain round mild steel

Columns or the likes;

In columns

D 10mm Diameter; links or the likes KG 490

Beams or the likes;

In floor beams

E 10mm Diameter; links or the likes KG 965

In roof beams

F 10mm Diameter; links or the likes KG 501

Reinforcement bars; hot rolled deformed high tensile steel

Columns or the likes;

In columns

G 16mm Diameter; straight and bent KG 196

H 20mm Diameter; straight and bent KG 699

J 25mm Diameter; straight and bent KG 1221

Beams or the likes;

In floor beams

K 16mm Diameter; straight and bent KG 502

L 20mm Diameter; straight and bent KG 1565

M 25mm Diameter; straight and bent KG 244

In roof beams

N 16mm Diameter; straight and bent KG 511

P 20mm Diameter; straight and bent KG 750

Q 25mm Diameter; straight and bent KG 1247

To Collection 0
Item Description Unit Quantity Rate Amount

FRAME (Contd)

CONCRETE WORK (Contd)

Class F1 formwork as specified

Columns or the likes

A To sides of columns M2 127

Beams or the likes

To sides and soffits of floor beams

B Horizontal M2 184

To sides and soffits of roof beams

C Horizontal M2 157

D Sloping over 15 degree from horizontal M2 8

To Collection 0
Item Description Unit Quantity Rate Amount

Collection

FRAME

B1/5

B1/6

To Summary 0
Item Description Unit Quantity Rate Amount

UPPER FLOOR

CONCRETE WORK

IN-SITU CONCRETE

Reinforced Concrete Grade 30 as specified

Slabs or the likes;

In floor slab

A 150mm - 300mm Thick M3 2

Reinforcement bars; hot rolled deformed high tensile steel

Slabs or the likes

In floor slab

B 12mm Diameter; straight and bent KG 251

Class F1 formwork as specified

Slabs or the likes

To soffits of floor slab

C Horizontal M2 12

PRECAST CONCRETE

Notes;

The tenderer shall have deemed to have studied the

drawing/specification and visited the site to determine the extent and/or
nature of pre casting, transportation, double handling, hoisting, hoisting
equipments, fixing, etc. No claims will not be entertained on the ground
of ignorance of extent and/or nature of such works as he is deemed to xx

If in the opinion of the tenderer, the precast panels may be cast into
smaller/bigger units, he should seek for clarification and approval from
the S. O. All costs in connection with any amendments to the precast xx

The tenderer shall note that all unplastered surfaces to precast concrete
shall be finished smooth.He shall allow for this in his prices accordingly. xx

Rates to include casting in conduits, forming chases and openings etc.

for mechanical and electrical installation. It is the tenderer's
responsibility to check the extent of this work from the Mechanical and xx

Precast concrete slab

Precast concrete ; BS 5750,reinforced at contractor's discrection; to

approval all as per drawing no.IP(S-

D 900mm x 2100mm x 175mm Thick reinforced with lattice girder and

main bar complete with bracket, sealer, peripheral ties and fair finished NR 1

E 900mm x 3000mm x 175mm Thick reinforced with lattice girder and

main bar complete with bracket, sealer, peripheral ties and fair finished NR 1

F 900mm x 3600mm x 175mm Thick reinforced with lattice girder and

main bar complete with bracket, sealer, peripheral ties and fair finished NR 1

To Collection 0
Item Description Unit Quantity Rate Amount

UPPER FLOOR (Contd)

CONCRETE WORK (Contd)

A 1200mm x 1500mm x 175mm Thick reinforced with lattice girder and

main bar complete with bracket, sealer, peripheral ties and fair finished NR 1

B 1200mm x 2100mm x 175mm Thick reinforced with lattice girder and

main bar complete with bracket, sealer, peripheral ties and fair finished NR 4

C 1200mm x 2100mm x 175mm Thick reinforced with lattice girder and

main bar complete with bracket, sealer, peripheral ties and fair finished NR 1

D 1200mm x 2200mm x 175mm Thick reinforced with lattice girder and

main bar complete with bracket, sealer, peripheral ties and fair finished NR 2

E 1200mm x 3000mm x 175mm Thick reinforced with lattice girder and

main bar complete with bracket, sealer, peripheral ties and fair finished NR 2

F 1200mm x 3600mm x 175mm Thick reinforced with lattice girder and

main bar complete with bracket, sealer, peripheral ties and fair finished NR 10

G 1200mm x 4200mm x 175mm Thick reinforced with lattice girder and

main bar complete with bracket, sealer, peripheral ties and fair finished NR 4

H 2100mm x 1500mm x 175mm Thick reinforced with lattice girder and

main bar complete with bracket, sealer, peripheral ties and fair finished NR 1

To Collection 0
Item Description Unit Quantity Rate Amount

Collection

UPPER FLOOR

B1/8

B1/9

To Summary 0
Item Description Unit Quantity Rate Amount

ROOF

CONCRETE WORK

IN-SITU CONCRETE

Reinforced Concrete Grade 30 as specified

Slabs or the likes;

In upper floor slab

A 100mm - 150mm Thick gutter slab including all necessary formwork and M3 4

In roof slab

B 100mm - 150mm Thick M3 4

In plinth

C 4200mm x 200mm x 450mm Thick plinth slab including all necessary

reinforcement and formwork all as per drawing NoIP(S- NO 6

Reinforcement bars; hot rolled plain round mild steel

Slabs or the likes

In roof slab

D 12mm Diameter; straight and bent KG 998

Class F1 formwork as specified

Slabs or the likes

To soffits of roof slab

E Horizontal M2 24

ROOFING

SLATE OR TILE ROOFING

Roofing; concrete interlocking tiles as specified; fixing every fifth course

with two aluminium alloy nails per tile to 75mm lap; 38mm x 25mm
pressure treated Group 'B' timber battens fixed with galvanised nails

Coverings

F Sloping, pitch 32 degrees M2 335

EXTRA OVER 30 degrees pitch coverings for

G Ridge tiles; bedded and jointed in cement mortar (1:3) M 26

EXTRA OVER 32 degrees pitch coverings for

H Hip tiles; bedded and jointed in cement mortar (1:3) M 50

J Fair ends; bedded and jointed in cement mortar (1:3) NO 12

Underlay

K Double sided aluminium foil insulation as specified; lapped 150mm at M2 335

To Collection 0
Item Description Unit Quantity Rate Amount

ROOF (Contd)

ROOFING (Contd)

Flashings; zinc sheet as specified

SHEET METAL FLASHINGS AND GUTTERS

Valley tray; zinc sheet as specified

20 Gauge linings to valley tray; fixing with zinc clips

A 600mm Girth M 38

No. 8 gauge flashings; 150mm lapped joints; fixing with matching clips

B 300mm Girth; one ends dressed over roof covering; other ends fixed to M 45

C 300mm Girth; one ends dressed over roof covering; other ends fixed to M 32

WOODWORK

CARCASSING ITEMS

Wrot pressure treated Group `B' timber as specified

Strutting

C 50mm x 50mm Timber support; including all necessary plate, bolt and M 14

D 100mm x 50mm Timber support; including all necessary plate, bolt and M 59

BOARDING AND FLOORING

Wrot pressure treated Group `B' timber as specified

Boarding to eaves, verges, fascias or the like

E 200mm thick x 20mm wide board M 150

COMPOSITE ITEM

Sawn pressure treated Group `B' timber as specified

Roof trusses

The Contractor shall submit with his Tender Preliminary Design

Proposals for the proprietary trusses system duly certified by the
manufacturer approved by the Government, together with all other xx

The proposed design shall be approved by the S.O. prior to fabrication

and installation on site. The S.O. reserves the right to make any
changes/amendments to the proposed design. Any such xx

F `PATENTED' Roof trusses for pitch roof with and including all necessary
supports as indicated based on relevant drawings and as specified,
overall area approximately 290m2 (measured flat on plan) including
design, built, supply, erection and fixing in position of trusses ITEM 1

Wrot pressure treated Group `B' timber as specified

gable end

G Fixed louvred vent including framing and finished complete overall size
1000 mm x 600 mm as per Drawing No HQA(98)A208/ C6 (SBH) / BG2 NO 6

H Fixed louvred vent including framing and finished complete overall size
1400 mm x 900 mm as per Drawing No HQA(98)A208/ C6 (SBH) / 7 NO 1

To Collection 0
Item Description Unit Quantity Rate Amount

ROOF (Contd)

WOODWORK (Contd)

PLUMBING AND MECHANICAL ENGINEERING INSTALLATIONS

RAINWATER INSTALLATION; GUTTERWORK

uPVC box gutters and fittings; push fit connector joints; gutterwork and
supports self coloured grey as specified

300 mm x 200mm; joints in the running length; supports at average

A In standard fascia brackets fixed with galvanized screws to timber M 66

RAINWATER INSTALLATION; PIPEWORK

uPVC pipes and fittings; push fit joints; pipework and supports self
coloured grey as specified; externally

100 Diameter pipework; joints in the running length

B In standard bracket including all necessary fixings fixed to wall or column M 54

100mm Diameter pipework; joints in the running length

C EXTRA OVER for swan neck NO 10

D EXTRA OVER for bend NO 20

100 pipework; joints in the running length; embedded in the concrete or

E Laid in position M 15

Sundries

Balloon grating to suit and set on top of rainwater pipe

F 100mm Diameter NO 10

PAINTING AND DECORATING

NEW WORK

Woodwork

Knot and stop, prime and enamel paint as specified

G General surfaces of timber; 150mm - 300mm Girth M 150

H On surfaces of timber frame; 150mm - 300mm girth M 73

To Collection 0
Item Description Unit Quantity Rate Amount

Collection

ROOF

B1/11

B1/12

B1/13

To Summary 0
Item Description Unit Quantity Rate Amount

STAIRS

CONCRETE WORK

IN-SITU CONCRETE

Reinforced Concrete Grade 30 as specified

Staircase

A In steps and staircase M3 3

Reinforcement bars; hot rolled plain round mild steel

Staircase or the likes;

In steps and staircase

B 10mm Diameter; straight and bent KG 14

Reinforcement bars; hot rolled deformed high tensile steel

Staircase or the likes;

In steps and staircase

C 12mm Diameter; straight and bent KG 15

D 16mm Diameter; straight and bent KG 490

E 20mm Diameter; straight and bent KG 12

Class F1 formwork as specified

Staircase or the likes

To soffits of staircases

F Sloping over 15 degree from horizontal M2 6

To soffits of landing slab

G Horizontal M2 4

To sides and soffits of landing beam

H Horizontal M2 2

To riser of staircase

J Not exceeding 250mm wide M 24

To edges of landing slab

K Not exceeding 250mm wide M 11

To edges of staircase flights

L Maximum width 250mm M 11

To Collection 0
Item Description Unit Quantity Rate Amount

STAIRS (Contd)

METALWORK

BALUSTRADES & STAIRCASES

Mild steel in welded joints as specified

Decorative railing comprising of 50mm Diameter x 3.2mm thick mild

steel handrail (measured separately), 20mm x 20mm x 3.2mm thick
RHS top and bottom rail; both end welded to 50mm x 20mm x 3.2mm
thick RHS column post at 584mm centres; infilled with 3.2mm x 20mm
thick m.s plate and 12mm x 3.2mm m.s. plate; welded all members
together and including all finish with a layer of anti-rust and two coats of
gloss enamel paint as specified to S.O's approval as per drawing no. HQ
(98)KK(TG)3 3 d 3 4
A 1020mm High mild steel railing Type ST2 M 4

Handrails

B 50mm Diameter x 3.2mm thick in welded joints as per drawing No.

HQA(98)A208/C6(SBH)/TG2 M 8

C EXTRA OVER for quadrant NO 1

FLOOR, WALL AND CEILING FINISHINGS

STAIRCASE AREA

Tiled Work

'Kempas' timber strip, 50mm x 10mm timber strip with and approved
adhesive on and including 20mm thick cement and sand (1:3) screeded

D Landing slab; level, falls and crossfalls and to slope not exceeding 15
degrees from horizontal M2 4

E Riser; 160mm high M 24

F Tread; 260mm wide M 22

G 100mm high timber skirting on concrete base with top rounded edge M 13

PAINTING AND DECORATING

NEW WORK

Staircase Finishes

Emulsion paint as specified

H To soffit of landing slab M2 4

J To sloping soffit of staircase M2 6

K To sides of raking open string M 11

L To sides and soffit of landing beams M2 2

Prepare and apply two coats varnish as specified

M On general surfaces of timber; 0mm - 150mm girth M 13

N On general surfaces of timber; over 300mm girth M2 4

To Collection 0
Item Description Unit Quantity Rate Amount

Collection

STAIRS

B1/15

B1/16

To Summary 0
Item Description Unit Quantity Rate Amount

EXTERNAL WALLS AND BALUSTRADING

CONCRETE WORK

PRECAST CONCRETE

Precast concrete; standard or stock pattern units

Decorative capping

A 75mm x 50mm Overall size approved 'GRC' capping including

necessary painting all as per drawing no. HQ(98)KK(TG)1-4 M 14

B 250mm x 75mm Overall size approved 'GRC' capping including

necessary painting all as per drawing no. HQ(98)KK(TG)1-4 M 3

BRICKWORK AND BLOCKWORK

LOAD BEARING SUPERSTRUCTURE

Common bricks as specified; in cement mortar (1:3)

Walls

C Half brick thick; stretcher bond M2 264

Damp proof course as specified; 100 laps; bedding in cement mortar

(1:6); no allowance in measurement for laps

On horizontal surfaces

D 115mm Wide M 68

NON-LOAD BEARING SUPERSTRUCTURE

Aerated concrete blocks as specified; in cement mortar (1:3); stretcher

Walls or partitions

E 150mm Thick M2 4

METALWORK

RAILING

Mild steel in welded joints as specified

Railing comprising of 50mm x 40mm x 3.2mm thick RHS handrail,

20mm x 20mm x 3.2mm thick RHS top and bottom rail; both end welded
to 20mm x 20mm x 3.2mm thick RHS vertical post, 20mm x 3.2mm thick
plates as vertical and horizontal intermediate rails welded all members
together and including all finish with a layer of anti-rust and two coats of
gloss enamel paint as specified to S.O's approval and as per
Architectural drawing no. HQ (98)KK(TG) 1-1, HQ (98)KK(TG) 1-3 and
HQ (98)KK(TG) 1 4
F 1200mm x 1100mm high overall size mild steel railing Type ST2 NO 2

GLAZING

GLASS BLOCKS

Glass block, 190mm x 190mm x 80mm as specified, jointing in white

coloured cement mortar (1:6); flush smooth pointing as work proceeds;
work designed to be built without cutting blocks As per drawing No HQA

Walls or partitions

G 20mm Thick; finishing fair and pointing each side M2 3

To Summary 0
Item Description Unit Quantity Rate Amount

WINDOWS, VENTS AND EXTERNAL DOORS

CONCRETE WORK

PRECAST CONCRETE

Precast concrete lintel

A 150mm x 115mm Precast concrete Grade 30 as specified lintel;

reinforced with and including 4 nos. 12mm Diameter high tensile bars
and 6mm diameter mild steel stirrups; fair finish all faces M 47

WOODWORK

UNFRAMED FIXING

Sawn pressure treated Group `B' timber as specified

Window beads, nosings, or the likes

B 75mm x 13mm M 11

Wrot pressure treated Group `B' timber as specified

Framework to brick walls; to receive door finish

C 150mm x 50mm hardwood frame M 11

Architrave, cover fillets or the likes

D 75mm x 15mm; splays M 224

Stops

E 50mm x 18mm M 11

COMPOSITE ITEM

Wrot pressure treated Group `B' timber as specified

Flush door

F 900mm x 2100mm x 40mm thick door (Type P4) comprising of 100mm x

30mm stiles, rails; covered both sides with 4mm thick plywood, and
lipped all around with twice rebated edging.As per drawing No HQA (98) NO 1

G 900mm x 2100mm x 40mm Thick door (Type P5) comprising of 100mm

x 30mm top rail, 50mm x 18mm intermediate frame, 150mm x 30mm
bottom rail and 100mm x 30mm side frame; 50mm x 18mm nogging,
12mm thick fixed louvres size 350mm x 500mm including 20mm 40mm
framing all round and 12mm beading and covered with 4mm thick
plywood lining on both sides, and lipped all around with twice rebated NO 1
Q( ) ( ) O
Panelled door

H 900mm x 2100mm x 50mm thick decorative door in 8 panel (Type P3)

(framing and ironmongeries measured separately) all as per drawing
NoHQA (98) A208 / C6 (SBH) / PT1a NO 1

J 1500mm x 2100mm x 50mm thick decorative door in 16 panel (Type P1)

(framing and ironmongeries measured separately) all as per drawing
NoHQA (98) A208 / C6 (SBH) / PT1a NO 1

IRONMONGERY

Ironmongery or other equal and approved; to timber or concrete

including providing requisite matching screws

Knobset

K 'Yale NVCA 5057-H30-US3' or approved equivalent decorative Entrance NO 1

To Collection 0
Item Description Unit Quantity Rate Amount

WINDOWS, VENTS AND EXTERNAL DOORS (Contd)

WOODWORK (Contd)

A 'NEMEF H30349/715/760' or approved equivalent mortise body

complete with KTT and lever handle NO 1

B 'TREX RC 607 - H30 - 70mm or approved equivalent SSF Knobset NO 1

C 'YALE ANSI Grade 3 CA5237-H30-70' or approved equivalent SSF NO 1

D 'TREX H30' or approved equivalent 150mm x 25mm Stainless steel NO 1

E 'TREX H30' or approved equivalent 300mm x 25mm Stainless steel NO 1

F 'YALE 373 x H30 x 374' or approved equivalent rebatted set NO 1

G 'YALE 180 degrees - H30 - Eye Viewer US3 Finish' or approved NO 1

Hinges

H 102mm x 76mm x 2.0mm 'TREX PB H30' or approved equivalent plain

bearing stainless steel hinges NO 12

Door closer/stopper

J TREX H30, 38mm rubber stopper NO 5

K YALE H30, Door Guard US3 finish NO 3

METALWORK

METAL WORKS IN STEEL HOLLOW SECTION, B.S.4848; PT.2

Mild Steel Grilles

Mild steel sliding door grille comprising of 30mm x 30mm x 30mm L mild
steel angle framing; 30mm x 30mm mild steel hollow section rib
anchored to wall panel all welded together complete with `Henderson
marathonr' or equivalent sliding grille gear set and complete with flush

L 2550mm x 2100mm High; Type GP8a NO 3

Mild steel grille comprising of 12mm x 12mm x 6mm thick mild steel
hollow section framing and filled with 12mm x 4mm thick plat and set
dioganally all welded together equivalent lock-set all as per

M 900mm x 2100mm High; Type GP4 NO 2

N 1500mm x 2100mm High; Type GP1 NO 1

Mild steel grille comprising of 12mm x 12mm x 6mm thick mild steel
hollow section framing and filled with 12mm x 4mm thick plat and set
dioganally all welded together as per manufacturer's detail

P 600mm x 1.2mm High; Type GTA1 NO 1

Q 600mm x 600mm High; Type GTA14 NO 4

R 1200mm x 600mm High; Type GTA15 NO 1

S 1200mm x 1050mm High; Type GTA11 NO 1

To Collection 0
Item Description Unit Quantity Rate Amount

WINDOWS, VENTS AND EXTERNAL DOORS (Contd)

METALWORK (Contd)

A 1200mm x 1200mm High; Type GTA2 NO 4

B 1800mm x 1200mm High; Type GTA3 NO 3

C 2400mm x 1200mm High; Type GTA4 NO 1

DOORS

Mild Steel door frame to manufacturer's detail

D 320mm Girth; including fixed to wall and lintol M 112

Aluminium; natural anodised finish as specified

Sliding door consisting of frame, top and bottom track factory infilled with
6mm thick float glass, weatherstrip woolpile and all necessary painting
all as per manufacturer's detail and as per drawing no.

E 2400mm x 2100mm high (Type P8a) double leaf door NO 3

WINDOWS

Aluminium; natural anodised finish as specified

Casement

F 600mm x 600mm top hung window Type TA14 consisting of top hung
panel each size 600mm x 600mm high; coupling mullion, assembling;
fixing by bolting; fixing with screws complete with matching restrainer NO 4

G 1200mm x 600mm top hung window Type TA15 consisting of top hung
panel each size 600mm x 600mm high; coupling mullion, assembling;
fixing by bolting; fixing with screws complete with matching restrainer NO 1

H 1200mm x 1500mm composite window Type TA11a consisting of fix

louvered panel at top and side hung window each size 600mm x
950mm; coupling mullion, assembling; fixing by bolting; fixing with
screws complete with matching restrainer and latch set and all NO 1

J 1200mm x 1650mm composite window Type TA7 consisting of fix

louvered panel at top and side hung window each size 600mm x
1100mm; coupling mullion, assembling; fixing by bolting; fixing with
screws complete with matching restrainer and latch set and all NO 2

K 1800mm x 1650mm composite window Type TA8 consisting of fix

louvered panel at top and side hung window each size 600mm x
1100mm; coupling mullion, assembling; fixing by bolting; fixing with
screws complete with matching restrainer and latch set and all NO 1

L 1200mm x 1650mm composite window Type TA7b consisting of fixed

louvre panel at bottom and side hung window each size 600mm x
1100mm; coupling mullion, assembling; fixing by bolting; fixing with
screws complete with matching restrainer and latch set and all NO 2

To Collection 0
Item Description Unit Quantity Rate Amount

WINDOWS, VENTS AND EXTERNAL DOORS (Contd)

METALWORK (Contd)

A 1800mm x 1650mm composite window Type TA8b consisting of fixed

louvre panel at bottom and side hung window each size 600mm x
1100mm; coupling mullion, assembling; fixing by bolting; fixing with
screws complete with matching restrainer and latch set and all NO 2

B 600mm x 1200mm side hung window Type TA1 each size 600mm x
1200mm; coupling mullion, assembling; fixing by bolting; fixing with
screws complete with matching restrainer and latch set and all NO 1

C 2400mm x 1200mm side hung window Type TA16 each size 600mm x
1200mm; coupling mullion, assembling; fixing by bolting; fixing with
screws complete with matching restrainer and latch set and all NO 1

D 1200mm x 3700mm composite window consisting of 4 nos. top hung

panel each size 600mm x 900mm high and 4 nos. fix glass panel each
size 600mm x 925mm; coupling mullion, assembling; fixing by bolting;
fixing with screws complete with matching restrainer and latch set and all
necessary accessories all as per drawing no. NO 1

Supply and install complete approved louvred window complete with

frame, head, sills, mullion, transome, rustproofed fixing brackets, back
PVC infill strip and accessories and including hoisting , placing panel
unit into position, plugging and screwing, fixing brackets to brickwork or
concrete, bedding and filling in back of frame with waterproof cement
mortar (1:3) and pointing joints with sealants and fixing all in accordance
t th f t ' i t ti d h d d t il d i
E Fixed louvred window overall size 600mm wide x 600mm high with and
including approved anti-vermin netting fixed on internal face (Type TR4) NO 1

F Fixed louvred window overall size 1500mm wide x 600mm high with and
including approved anti-vermin netting fixed on internal face (Type TR5) NO 4

GLAZING

WINDOWS, VENTS AND EXTERNAL DOORS

Clear float glass as specified

6mm Thick glass fixed to aluminium frame with and including glazing
strip and silicon topping

G 0.1m2 - 0.5m2 M2 7

H 0.5m2 - 1m2 M2 20

PAINTING AND DECORATING

NEW WORK

Woodwork

Knot and stop, prime and enamel paint as specified

J On surfaces of timber frame; 0mm - 150mm girth M 224

K On surfaces of timber frame; 150mm - 300mm girth M 11

To Collection 0
Item Description Unit Quantity Rate Amount

WINDOWS, VENTS AND EXTERNAL DOORS (Contd)

PAINTING AND DECORATING (Contd)

A On surfaces of door ; over 300mm girth M2 8

Varnish as specified

B On surfaces of panel door (measured flat overall); over 300mm girth M2 10

Metalwork

Etching primer and enamel paint as specified

C Surfaces of metal door frame; over 300mm girth M2 36

To Collection 0
Item Description Unit Quantity Rate Amount

Collection

WINDOWS, VENTS AND EXTERNAL DOORS

B1/19

B1/20

B1/21

B1/22

B1/23

To Summary 0
Item Description Unit Quantity Rate Amount

INTERNAL WALLS

BRICKWORK AND BLOCKWORK

LOAD BEARING SUPERSTRUCTURE

Common bricks as specified; in cement mortar (1:3)

Walls

A Half brick thick; stretcher bond M2 222

Damp proof course as specified; 100 laps; bedding in cement mortar

(1:3); no allowance in measurement for laps

On horizontal surfaces

B 115mm Wide M 32

WOODWORK

BOARDING AND FLOORING

'NEWLUX" or approved equivalent calsium silicate board cladding

Boarding to walls; shiplapped joints

C 9mm Thick vertically fixed to with and including mild steel plate, bolt
and nuts with finishes complete all as per drawing no. M2 17

To Summary 0
Item Description Unit Quantity Rate Amount

INTERNAL DOORS

CONCRETE WORK

PRECAST CONCRETE

Precast concrete lintel

A 150mm x 115mm Precast concrete Grade 30 as specified lintel;

reinforced with and including 4 nos. 12mm Diameter high tensile bars
and 6mm diameter mild steel stirrups; fair finish all faces M 15

Precast concrete heel stones

B 150mm x 50mm x 150mm High cast to profile of door frame including

wrot formwork as specified NO 12

WOODWORK

UNFRAMED FIXING

Sawn pressure treated Group `B' timber as specified

Stops

C 50mm x 18mm M 5

Window beads, nosings, or the likes

D 75mm x 13mm M 5

Wrot pressure treated Group `B' timber as specified

Framework to brick walls; to receive door finish

E 150mm x 50mm hardwood frame M 5

Architrave, cover fillets or the likes

F 75mm x 15mm; splays M 111

COMPOSITE ITEM

Wrot pressure treated Group `B' timber as specified

Flush door

G 900mm x 2100mm x 40mm Thick door (Type P4) comprising of 100mm

x 30mm top rail, 50mm x 30mm intermediate frame, 150mm x 30mm
bottom rail and 100mm x 30mm side frame; covered with 4mm thick
plywood lining with an approved water-proof lamination on both sides,
and lipped all around with twice rebated edging all as per drawing no. NO 6

H 800mm x 2100mm x 40mm thick doors (Type P6) comprising of 50mm x

30mm intermediate frame ,100mm x 30mm top rail, side frame; 150mm
x 30mm bottom rails; covered both sides with 4mm thick plywood lining
with an approved water proof lamination on both sides lipped all around
with twice rebated edging and including mild steel frame and all
necessary fixing to brickwork or concrete as per drawing no. NO 4
Q( ) ( )
J 900mm x 2100mm x 40mm Thick door (Type P5) comprising of 100mm
x 30mm top rail, 50mm x 18mm intermediate frame, 150mm x 30mm
bottom rail and 100mm x 30mm side frame; 50mm x 18mm nogging,
12mm thick fixed louvres size 350mm x 500mm including 20mm 40mm
framing all round and 12mm beading and covered with 4mm thick
plywood lining on both sides, and lipped all around with twice rebated NO 1
Q( ) ( ) O

To Collection 0
Item Description Unit Quantity Rate Amount

INTERNAL DOORS (Contd)

WOODWORK (Contd)

Panelled door

A 900mm x 2100mm x 50mm thick decorative door in 8 panel (Type P3)

all as per drawing (framing and ironmongeries measured separately) NO 1 0

IRONMONGERY

Ironmongery or other equal and approved; to timber or concrete

including providing requisite matching screws

Knobset

B 'NEMEF H30349/715/760' or approved equivalent mortise body

complete with KTT and lever handle NO 1

C 'TREX RC 607 - H30 - 70mm or approved equivalent SSF Knobset NO 6

E 'YALE ANSI Grade 3 CA5237-H30-70' or approved equivalent SSF NO 1

E 'YALE ANSI Grade 3 CA5232-H30-70' or approved equivalent SSF NO 4

F 'TREX H30 1729' or approved equivalent hat and coat hook NO 8

Hinges

G 102mm x 76mm x 2mm 'TREX PB H30' or approved equivalent plain

bearing stainless steel hinges NO 24

H 102mm x 76mm x 2mm 'TREX NRH30' or approved equivalent nylon

ring galvanised steel hinges NO 12

Door closer/stopper

J TREX H30, 38mm rubber stopper NO 8

K YALE H30, Door Guard US3 finish NO 7

METALWORK

DOORS

Mild Steel door frame to manufacturer's detail

L 320mm Girth; including fixed to wall and lintol M 56

PAINTING AND DECORATING

NEW WORK

Woodwork

Knot and stop, prime and enamel paint as specified

M General surfaces of timber; 150mm - 300mm Girth M 5

N On surfaces of timber frame; 0mm - 150mm girth M 111

P On surfaces of door ; over 300mm girth M2 46

Metalwork

Etching primer and enamel paint as specified

Q General surfaces of metal; over 300mm girth M2 18

To Collection 0
Item Description Unit Quantity Rate Amount

Collection

INTERNAL DOORS

B1/26

B1/27

To Summary 0
Item Description Unit Quantity Rate Amount

EXTERNAL FLOOR FINISHES

FLOOR, WALL AND CEILING FINISHINGS

FLOOR

In situ Finishings

Cement and sand (1:3) rendering as specified; trowelled smooth

A 20 Thick to apron; level, falls and crossfalls and to slope not exceeding
15 degrees from horizontal; laid to fall M2 21

Tile, Slab and Block Finishing

Homogeneous floor tiles; 300mm x 300mm x 8.5mm as specified;

bedded and jointed in cement and sand (1:3) mortar; pointing with grout
in white cement; on and including 20mm thick cement and sand (1:3)

B Floor; level, falls and crossfalls and to slope not exceeding 15 degrees M2 55

C 100mm High to skirtings; with bull nose on edge M 36

Ceramic floor tiles, 200mm x 200mm x 6.8mm as specified; bedded and

jointed in cement mortar (1:3); pointing with grout in white cement; on
and including 20mm thick cement and sand (1:3) screeded bed

D Floor, level, falls and crossfalls and to slope not exceeding 15 degrees M2 8

E 100mm High to skirtings; with bull nose on edge M 9

Approved interlocking concrete tiles as specified with and including

50mm thick sand bed as per manufacturer's instructions

F Floor; level, falls and crossfalls and to slope not exceeding 15 degrees M2 7

Accessories

Brass dividing strips; setting in bed or finishing

G 3mm x 10mm; flat section M 4

To Summary 0
Item Description Unit Quantity Rate Amount

INTERNAL FLOOR FINISHES

FLOOR, WALL AND CEILING FINISHINGS

FLOOR

In situ Finishings

Cement and sand (1:3) rendering as specified; trowelled smooth

A 20 Thick to floor; level, falls and crossfalls and to slope not exceeding 15
degrees from horizontal M2 2

Tile, Slab and Block Finishing

Homogeneous floor tiles; 200mm x 200mm x 8.5mm as specified;

bedded and jointed in cement and sand (1:3) mortar; pointing with grout
in white cement; on and including 20mm thick cement and sand (1:3)

B Floor; level, falls and crossfalls and to slope not exceeding 15 degrees M2 33

C 100mm High to skirtings; with bull nose on edge M 33

Homogeneous floor tiles; 300mm x 300mm x 8.5mm as specified;

bedded and jointed in cement and sand (1:3) mortar; pointing with grout
in white cement; on and including 20mm thick cement and sand (1:3)

D Floor; level, falls and crossfalls and to slope not exceeding 15 degrees M2 66

E 100mm High to skirtings; with bull nose on edge M 46

'Non slip' homogeneous floor tiles; 200mm x 200mm x 8.5mm as

specified; bedded and jointed in cement and sand (1:3) mortar; pointing
with grout in white cement; on and including 20mm thick cement and

F Floor; level, falls and crossfalls and to slope not exceeding 15 degrees M2 19

G 100mm High to skirtings; with bull nose on edge M 32

Ceramic floor tiles, 300mm x 300mm x 6.8mm as specified; bedded and

jointed in cement mortar (1:3); pointing with grout in white cement; on
and including 20mm thick cement and sand (1:3) screeded bed

H Floor, level, falls and crossfalls and to slope not exceeding 15 degrees M2 60

J 100mm High to skirtings; with bull nose on edge M 45

Hardwood timber strip; timber strip with an approved adhesive on and

including 20mm thick cement and sand (1:3) screeded bed

K 100mm High timber skirting on concrete base with top rounded edge M 91

'Kempas' timber strip; 50mm x 10mm timber strip with an approved

adhesive on and including 20mm thick cement and sand (1:3) screeded

L Floor, level, falls and crossfalls and to slope not exceeding 15 degrees M2 102

To Collection 0
Item Description Unit Quantity Rate Amount

INTERNAL FLOOR FINISHES (Contd)

PAINTING AND DECORATING (Contd)

PAINTING AND DECORATING

NEW WORK

Woodwork

Varnish as specified

A General surfaces of timber beading; 0mm - 150mm Girth M 91

B General surfaces of timber; over 300mm Girth M2 102

To Collection 0
Item Description Unit Quantity Rate Amount

Collection

INTERNAL FLOOR FINISHES

B1/30

B1/31

To Summary 0
Item Description Unit Quantity Rate Amount

EXTERNAL CEILING FINISHES

WOODWORK

CARCASSING ITEMS

Sawn pressure treated Group `B' timber as specified

Pitched roof members including ceiling joists

A 100mm x 50mm Ceiling Joist M 293

B 50mm x 50mm Nogging M 112

FLOOR, WALL AND CEILING FINISHINGS

CEILING

Ceiling Board

Cement Board ceiling as specified; 600mm x 1200mm x 4.5mm Thick

fixed to ceiling joist and spacer (measured separately) and including all
necessary timber beading

C Linings to ceilings M2 124

Suspended ceilings; Cement Board ceiling as specified; 600mm x

1200mm x 4.5mm thick lay in grid and complete with metal framing and
tee-grid channel suspension system

D Linings to ceilings; M2 8

Fibrous Plaster

Suspended ceilings; Fibrous plaster ceiling board as specified; 1200mm

x 1800mm x 4.5mm thick lay in grid and complete with metal framing
and tee-grid channel suspension system

E Linings to ceilings M2 20

Fibre glass reinforced concrete cornice

F 100mm x 100mm Overall size to fibrous plaster board ceiling; level,

falls,falls and crossfalls and to slope not exceeding 15 degrees from M 17

PAINTING AND DECORATING

NEW WORK

Ceiling Finishes

Acrylic weathershield paint as specified

G To soffits of ceiling panel M2 152

H To cornice; 150mm - 300mm girth M 17

Woodwork

Knot and stop, prime and enamel paint as specified

J General surfaces of timber beading; 0mm - 150mm Girth M 405

To Summary 0
Item Description Unit Quantity Rate Amount

INTERNAL CEILING FINISHES

FLOOR, WALL AND CEILING FINISHINGS

CEILING

Plastering

Cement and sand (1:6) with an approved plasticiser as specified,

trowelled finish to sides and soffit of beams and concrete slab

A 20mm Thick M2 63

Ceiling Board

Suspended ceilings; Cement Board ceiling as specified; 600mm x

1200mm x 4.5mm thick lay in grid and complete with metal framing and
tee-grid channel suspension system

B Linings to ceilings; M2 22

Fibrous Plaster

Suspended ceilings; Fibrous plaster ceiling board as specified; 1200mm

x 1800mm x 4.5mm thick lay in grid and complete with metal framing
and tee-grid channel suspension system

C Linings to ceilings M2 183

D EXTRA OVER for forming 600mm x 600mm access panel and including
all necessary framing NO 1

Fibre glass reinforced concrete cornice

E 100mm x 100mm Overall size to fibrous plaster board ceiling; level,

falls,falls and crossfalls and to slope not exceeding 15 degrees from M 102

PAINTING AND DECORATING

NEW WORK

Ceiling Finishes

Emulsion paint as specified

F On ceiling board; over 300mm girth M2 205

G To soffit of plastered suspended slab and beams; over 300mm girth M2 63

H On cornice; 150 - 300mm girth M 102

To Summary 0
Item Description Unit Quantity Rate Amount

EXTERNAL WALL FINISHES

FLOOR, WALL AND CEILING FINISHINGS

WALL

Plastering

Cement and sand (1:6) plainface plaster mixed with an approved

plasticiser as specified; steel trowelled

A 20mm Thick work to walls on brickwork, blockwork or concrete work M2 300

B 20mm Thick work to isolated column M2 12

C EXTRA OVER for coping 300mm girth; not exceeding 300 mm M 64

Tile work

150mm x 100mm Stack stone as specified, bedded jointed and pointed

in cement mortar ( 1:3 ); on and including 20mm thick cement and sand

D Tiled to wall M2 30

PAINTING AND DECORATING

NEW WORK

Wall Finishes

Acrylic weathershield paint as specified

E On plastered isolated column; over 300mm girth M2 12

F On plastered wall; 150mm - 300mm girth M 64

G On plastered wall; over 300mm girth M2 300

To Summary 0
Item Description Unit Quantity Rate Amount

INTERNAL WALL FINISHES

FLOOR, WALL AND CEILING FINISHINGS

WALL

Plastering

Cement and sand (1:6) plainface plaster mixed with an approved

plasticiser as specified; steel trowelled

A 20mm Thick work to walls on brickwork, blockwork or concrete work M2 697

Tile work

Ceramic wall tiles 200mm x 200mm as specified, bedded jointed and

pointed in cement mortar (1:3); on and including 20mm thick cement

B Tiled to wall M2 84

PAINTING AND DECORATING

NEW WORK

Wall Finishes

Emulsion paint as specified

C On plastered wall; over 300mm girth M2 697

To Summary 0
Item Description Unit Quantity Rate Amount

FITTINGS AND FURNISHINGS

WOODWORK

COMPOSITE ITEM

Wrot pressure treated Group `C' timber as specified

Fittings

A Kitchen cabinet; overall size 450mm x 600mm x 750mm high kitchen

cabinet all as per drawing (Type B15) NO 2

B Kitchen cabinet; overall size 600mm x 600mm x 750mm high kitchen

cabinet all as per drawing (Type B12) NO 1

C Kitchen cabinet; overall size 600mm x 600mm x 2000mm high kitchen

cabinet all as per drawing (Type T10) NO 1

D Kitchen cabinet; overall size 900mm x 600mm x 750mm high kitchen

cabinet all as per drawing (Type B13) NO 2

E Kitchen sink worktop cum cabinet ; overall size 1200mm x 600mm x

750mm all as per drawing (Type S18) NO 2

F High level wall hung cabinet; overall size 450mm x 300mm x 450mm
high all as per drawing (TypeG5) NO 1

G High level wall hung cabinet; overall size 450mm x 300mm x 600mm
high all as per drawing (TypeG1) NO 1

H High level wall hung cabinet; overall size 600mm x 300mm x 450mm
high all as per drawing (TypeG6) NO 1

J High level wall hung cabinet; overall size 900mm x 300mm x 450mm
high all as per drawing (TypeG7) NO 1

K High level wall hung cabinet; overall size 900mm x 300mm x 600mm
high all as per drawing (TypeG3) NO 1

L `L' shaped cabinet; overall size 1950mm x 300mm x 450mm high as per
drawing No.HQA (98) A208 / C6 (SBH) PR 1b NO 1

M Wardrobe; overall size 450mm x 600mm x 1200mm high all as per NO 3

N Wardrobe; overall size 450mm x 600mm x 2400mm high all as per NO 4

P Wardrobe; overall size 1500mm x 600mm x 2400mm high all as per

drawing (Type BT5) NO 4

Q Wardrobe; overall size 600mm x 450mm x 2100mm high,comprising of

shelves and glass door all as per drawing (Type RT2) NO 4

R Shoes Cabinet; overall size 1050mm x 400mm x 2100mm high

comprising of shelves and fixed louvre door all as per manufacturer's NO 2

S Tv cabinet; overall size 1500mm x 450mm x 2100mm high comprising of

shelves and glass door all as per manufacturer's detail and drawing NO 2

To Summary 0
Item Description Unit Quantity Rate Amount

SANITARY FITTINGS

PLUMBING AND MECHANICAL ENGINEERING INSTALLATIONS

SANITARY INSTALLATION; FITTINGS

Supply and fix the following Sanitary Fittings and accessories, including
jointing and connecting to services and soil and waste pipes and making
good all work disturbed; internally

Basin

A Approved 570mm x 4200mm vitreous china counter top vanity basin

complete with plastic bottle trap; waste plug and chain complete with
pillar tap; bright chrome plated with metal handle including making good NO 2 0

B Approved 500mm x 420mm vitreous wall hung wash basin complete

with plastic bottle trap; waste plug and chain complete with pillar tap;
bright chrome plated with metal handle including making good wall tiling NO 2

Water Closet

C Approved back inlet squatting water closet pan in white vitreous china
complete with integral foot treads and loose 'S' trap in vitreous china;
complete with 6 litres mid level cistern (level) and lid in vitreous china
and complete with all necessary internal fittings; bedding pan in concrete
bed and including working or making good floor and wall tiling around. NO 1

D Approved close coupled washdown pedestal water closet in vitreous

china with horizontal/bottom outlet in vitreous china; 6 litres button
activated cistern and lid in vitreous china complete with all necessary
internal fittings; complete with hinged seat and cover in matching colour;
fixing pan with screws and setting pan in tiled concrete floor and NO 3

Shower

E Approved equivalent complete with arm and hand wall flanged with stop NO 3

Soap Holder

F Approved equivalent 310mm x 160mm x 95mm semi recessed soap and

sponge holder in vitreous china fixed to tiled wall NO 3

G Approved equivalent 165mm x 165mm x 95mm semi recessed soap

dish in vitreous china fixed to tiled wall NO 1

Mirror

H 600mm x 1000mm x 6mm Thick approved bevelled edge plate glass

complete with 4mm thick waterproof plywood backing and fixed with
chromium plated dome headed fixing screws and cork washers NO 4

Toilet Roll Holder

J Approved equivalent 165mm x 165mm x 95mm semi recessed toilet roll

holder in vitreous china complete with plastic roller NO 4

Towel Rail

K Screw to wall complete with 600mm x 125mm chrome plated bar, plastic
rail insert and accessories fixing screws and plug NO 4

To Collection 0
Item Description Unit Quantity Rate Amount

SANITARY FITTINGS (Contd)

PLUMBING AND MECHANICAL ENGINEERING INSTALLATIONS

Tap and Hand Bidet

A Approved 12mm diameter booster bib tap; bright crome plated with
arrowline metal handle. NO 2

B Approved hand bidet set complete with flexible hose and wall bracket
with arrowline metal handle. NO 4

Water Trough

C Approved 558.8mm x 736.6mm (25 gallons) precast terrazo water tub. NO 1

Floor Trap

D Approved floor trap with cover NO 5

BUILDER'S WORK

Stool

Plain Concrete Grade 30 as specified

E 150mm - 300mm thick M3 1

Class F1 formwork as specified to edge of

F Not exceeding 250mm high M 2

TESTING

Sanitary Installation

Pipework and Fittings

G On completion of the plumbing installation test all appliances, pipe and

fittings, make good any defects and leave the whole in perfect working
order to the approval of the Superintending Officer. IT 1

To Collection 0
Item Description Unit Quantity Rate Amount

Collection

SANITARY FITTINGS

B1/38

B1/39

To Summary 0
Item Description Unit Quantity Rate Amount

PLUMBING INSTALLATION

PLUMBING AND MECHANICAL ENGINEERING INSTALLATIONS

COLD WATER INSTALLATION; PIPEWORK

Cold Water System; internally

Acrylonitrile Butadiene Styrene (ABS) pipes as specified

A Supply pipes and fittings, from and including first stopcock from
incoming mains to water storage tanks to sanitary appliances and scour
and overflow pipes from water storage tanks, including all necessary
excavation, connections with requisite connectors to water storage tank
and sanitary appliances, requisite pipe fittings, stopcock and requisite IT 1

Storage Water Tank

Fibreglass Reinforce Polyester (FRP) water tank as specified complete

with all accessories and fittings of approved manufacturer to JBA
approval, hoisted and placed in position at approximately 6500mm
above ground level in accordance to manufacturer's instruction all as

B 3000mm x 2000mm x 1000mm High (880 Gallon) NO 1

SANITARY INSTALLATION PIPEWORK

Soil, Waste and Vent Pipes; internally

UPVC pipes Class B.S 466 as specified

C Waste water, soil and vent pipes with and including all requisite fittings
from sanitary appliances and from floor traps and outlet grating to
connecting manholes or water channel drains including all necessary
excavation, concrete casing around pipework, connections with requisite
connectors to sanitary appliances, requisite openings, requisite to IT 1
h i f fl b d ll l t ll d i N
TESTING

Soil , waste, vent pipes and cold water installation

Pipework

D On completion of the plumbing installation test all soil, waste, vent pipes
and cold water piping and make good any defects and leave the whole
in perfect working order to the entire satisfaction of the Superintending it 1

To Summary 0
Item Description Unit Quantity Rate Amount

:Summary

:WORK BELOW LOWEST FLOOR FINISH

:RAMPS, APRON AND PERIMETER DRAINS

:FRAME

:UPPER FLOOR

:ROOF

:STAIRS

:EXTERNAL WALLS AND BALUSTRADING

:WINDOWS, VENTS AND EXTERNAL DOORS

:INTERNAL WALLS

:INTERNAL DOORS

:EXTERNAL FLOOR FINISHES

:INTERNAL FLOOR FINISHES

:EXTERNAL CEILING FINISHES

:INTERNAL CEILING FINISHES

:EXTERNAL WALL FINISHES

:INTERNAL WALL FINISHES

:FITTINGS AND FURNISHINGS

:SANITARY FITTINGS

:PLUMBING INSTALLATION

To Main Summary 0