Scribd
Upload
132 views2 pages

Chapter 9

ch9 ogata

Uploaded by

isbetaaccount
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
132 views2 pages

Chapter 9

ch9 ogata

Uploaded by

isbetaaccount
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
PROBLEMS B-9-1, Draw Bode diagrams of the lead network and lag network shown in Figures 9-61(a) and (b), respectively ‘Assume that R = 50kQand C = 10,F, BLS, Referring to the closed-loop system shown in Figure 9-63, design a lead compensator G(s) such that the phase ‘margin is 45°, gain margin is not less than 8 dB, and the static velocity error constant K, is 4.0 sec" Plot unit-step and unit- ramp response curves of the compensated system with MATLAB. tt o Figure 9-61 (a) Lead network; (b) lag network. : een .+3) sete PO cutter by Gs) = 5(1 + 058) B-9-3, Consider a PID controller given by (s+ 065) GAs) = 303215" Draw a Bode diagram of the controller. B-9-4, Figure 9-62 shows a block diagram of a space vehi- le attitude control system. Determine the proportional gain constant K,, and derivative time 7; such thatthe bandwidth of the closed-loop system is 0 to 0.5 rad/sec, (Note that the closed-loop bandwidth s close to the gain crossover fe 4queney.) The system must have an adequate phase margin, Plot both the open-loop and closed-loop frequency response curves on Bode diagrams axiom Figure 9-62, ‘Block diagram of space vehicle attitude control system. Problems ‘Closed-toop system, B-9-6, Consider the system shown in Figure 9-64. Design a compensator such that the static velocity error constant K, is 50 sec", phase margin is 50°, and gain margin not less than 8 dB. Plot unitstep and unit-ramp response curves of the compensated and uncompensated systems with MATLAB. cad | hy = Figure 9-64 Control system. B-9-7. Consider the system shown in Figure 9-65. Design ‘a compensator such that the static velocity error constaat is 4 sec, phase margin is 50°, and gain margin is 10 dB or ‘more, Plot unitstep and unit-ramp response curves of the ‘compensated system with MATLAB. Also, draw a Nyquist plot of the compensated system with MATLAB. eat G0) am Figure 9-65 Control system. 679 B-9-8, Consider the system shown in Figure 9-66. It is sired to design a compensator such that the static velocity error constant is4 sec", phase margin is 0°,and gain margin {8 4B or more. Plot the unitstep and unit-ramp response curves of the compensated system with MATLAB, fo Lf eon Ges) 7 Fe0ised Hydralioseno Atri Rate gyro Figure 9-66 Control system, . T a9) aa DES Figure 9-67 Control system. {B-9-9, Consider the system shown in Figure 9-67. Design ‘ Tag-lead compensator such that the static velocity error constant K, is 20 see“ phase margin is 60°, and gain margin is not less than 8 dB. Plot the unitstep and unit-ramp response curves ofthe compensated system with MATLAB. Chapter 9 / Control Systems Design by Frequency Response

You might also like