Scribd
Upload
321 views6 pages

Design of Doubly Reinforced Beam Details

This document summarizes the design of a doubly reinforced concrete beam. It provides the beam dimensions, load details, material properties, and calculations for the required moment capacity, steel reinforcement areas, and shear capacity. The design includes top and bottom reinforcement bars with diameters of 16mm and 25mm respectively, with 2 top bars and 5 bottom bars, along with 8mm diameter secondary bars spaced at 150mm.

Uploaded by

Vijay Aravind
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
321 views6 pages

Design of Doubly Reinforced Beam Details

This document summarizes the design of a doubly reinforced concrete beam. It provides the beam dimensions, load details, material properties, and calculations for the required moment capacity, steel reinforcement areas, and shear capacity. The design includes top and bottom reinforcement bars with diameters of 16mm and 25mm respectively, with 2 top bars and 5 bottom bars, along with 8mm diameter secondary bars spaced at 150mm.

Uploaded by

Vijay Aravind
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

DESIGN OF DOUBLY REINFORCED BEAM

Details
Depth of the beam 600
Width of the beam 300
Span of beam 5
Effective depth 560 Cover 40
Dead Load 0
Live load 75 kN/m
Grade of concrete 25
Grade of steel 415

Calculation of load & Moment


Dead load 4.5 kN/m
Live load 75
Other load 0
Factored load 119.25

Factored Moment 372.65625 kN-m


Factored shear 298.125 KN
Limiting moment 324.576 kN-m

Xu/d=> Xu 268.8

Calculation of steel reinforcement


Xu/d=(0.87*fy*Ast1)/(0.36*Fck*b*d)
Determine of Ast1
Ast1 2010.1371

Calculation of strain w.r.t stress


=0.0035*(Xu-d')/Xu
0.0029792
Stress due to above strain
Fsc 625.625 N/mm2 (or) 361.05
M-M,lim=Asc*Fsc*(d-d')
Asc 256.09201
Ast2=Asc*Fsc/0.87*fy
Ast2= 443.7545

Ast 2453.8916

Check for shear


Vs=V-c*b*d
Vs=*Asv*d/Sv
consider dia of sec reinforcement 8
Vs 298.09476 0.0299314
Spacing Sv 38.798079
Design Details
Dia of main reinforcement
Dia of top bar 16
Dia of bottom bar 25
No of top bars 2
No of bottom bars 5
Dia of secondary reinforcement 8
Spacings 150
DESIGN OF SINGLY REINFORCED BEAM
1. Given
Depth of the beam 400 mm
Width of the beam 280 mm
Span of the beam 6m
Effective depth 350 Cover 50
Dead Load 5 kN/m
Live load 10 kN/m
Grade of concrete 20 N/mm2
Grade of steel 415 N/mm2

2. Calculation of Moment
Self weight of the beam 2.24 kN/m
Factored load 25.86 kN/m
Factored Moment 116.37 kN-m

3. Check for moment


W.K.T
Moment of resistance 0.138Fck*b*d2 for Fe415
Moment 123.648 kN-m SAFE

4. Calculation of steel reinforcement


W.K.T
Limiting moment 0.87fy*Ast*d(1-Ast*fy/b*d*Fck)
A 26.7563839286 29.96715
B -126367.5
C 123648000

Area of steel 3338.77577625 (or) 1384.1158


M

Design
Dia. of main reinforcement 20
No of bars 5
mm

You might also like