University of The Philippines College of Science
University of The Philippines College of Science
University of The Philippines College of Science
College of Science
Physics 72
Set A
Final Exam (Pilot Copy)
First Semester, AY 20152016
Name: Instructor:
Course: College:
Final Exam (Pilot Copy) First Semester, AY 20152016 Physics 72
INSTRUCTIONS: Choose the letter of the best answer to each of the following questions.
Use Mongol 2 pencil only to shade your answer to the exam. To change your answer, neatly
erase your old answer and shade the new one. Take all the given variables to be positive. No
computational devices allowed (e.g. calculators, mobile phones). Any form of cheating in ex-
aminations or any act of dishonesty in relation to studies, such as plagiarism, shall be subject
to disciplinary action. Following instructions is part of the exam.
Useful formulas:
Surface Area Volume Volume element
4
Sphere (radius = r) 4r2 3 r
3
4r2 dr
Cylinder (radius = r, height = h) 2r2 + 2rh r2 h 2rh dr
Useful constants:
e 1.60 1019 C sin(/3) = cos(/6) = 3/2
me 9.1 1031 kg cos(/3) = sin(/6) = 1/2
0 8.854 1012 C2 /Nm2 sin(/4) = cos(/4) = 2/2
k 9 109 Nm2 /C2
0 4 107 Tm/A
c 3 108 m/s
1. what a qt! A negative test charge is placed a distance r from a positive charge q. Which of
the following statements is/are TRUE regarding the electric field of q, E, and the electric
force, Ft , on the negative test charge?
I. Ft is in the same direction as E.
II. Ft and E are in opposite directions.
III. At r, |E| |Ft |.
2. Moligoyong arrow! Shown are the electric field lines due to three point charges X, Y,
and Z. Which of the following statements is TRUE about the direction of the electric field
vector at point P and the nature of the charges?
A2
Final Exam (Pilot Copy) First Semester, AY 20152016 Physics 72
4. Liberte. What is the electric flux through the spherical Gaussian surface with radius r < R
located inside the conducting sphere?
A3
Final Exam (Pilot Copy) First Semester, AY 20152016 Physics 72
5. Egalit
e. What is the magnitude of the electric field on this Gaussian surface?
A. zero Q Qr Qr
B. C. D.
40 r2 40 R3 20 R3
6. Fraternite. What is the net charge on the outer surface of the rectangular conductor?
A. +2Q B. +Q C. Q D. 3Q
7. May potential! The potential at a point due to a unit positive charge is found to be V . If
the distance between the charge and the point is tripled, what is the new potential?
V B. 3V V D. 9V
A. C.
3 9
8. Sore Eyes. Consider the following electric configuration. Which of the labelled points has
the highest electric field magnitude?
A4
Final Exam (Pilot Copy) First Semester, AY 20152016 Physics 72
For the next three items, consider the capacitor circuit shown. All
capacitors in the circuit have the same capacitance C.
9. Tor-Capa ba? Tor na! What is the effective capacitance of the
circuit?
C C. 2C
A.
2
B. C D. 4C
10. Dark Energy. How much electric energy is stored in each of the
capacitors?
CV 2 C. CV 2
A.
4 D. 2CV 2
CV 2
B.
2
11. Darkelectric. If a dielectric with = 2 is inserted in all the capacitors, what is the new
effective capacitance of the circuit?
A. C B. 2C C. 4C D. 8C
12. Thou Shall DRIFT. What is the magnitude of the drift velocity of the electrons in a current
carrying wire with current density J = 8.0 106 A/m2 and free electron density n =
5.0 1028 m3 . (The charge of an electron is e.)
13. Step Current. Consider the circuit shown. What is the current
passing through the 8- resistor?
A. 3/8 A C. 3 A
B. 1 A D. 24 A
A5
Final Exam (Pilot Copy) First Semester, AY 20152016 Physics 72
For the next two items, consider the circuit shown. Each resistor
has the same resistance R = 1.0 .
14. Req. What is the equivalent resistance of the circuit?
7 6
A. C.
2 7
7 2
B. D.
6 7
15. Aywan. Which of the following is TRUE about the current passing through the resistors
when an ideal 6.0-V battery is connected to the circuit?
A6
Final Exam (Pilot Copy) First Semester, AY 20152016 Physics 72
A. 5 104 Wb C. 1 103 Wb
B. +5 104 Wb D. +1 103 Wb
20. Wire-in-a-wire-in-a-wire. Consider the cross section of three insulated coaxial wires with
the indicated currents as shown. What is the relationship of the magnetic field magnitudes
at points X, Y, and Z?
A7
Final Exam (Pilot Copy) First Semester, AY 20152016 Physics 72
21. 101. What is the net magnetic field at the center of the circular conductor?
0 I 0 I 0 I
A. , out of the page C. , out of the page
2R 2R 2R
0 I 0 I 0 I
B. , into the page D. , into the page
2R 2R 2R
22. One-on-One. If the circular conductor is removed, what is the force per unit length expe-
rienced by the left straight conductor due to the right straight conductor?
A8
Final Exam (Pilot Copy) First Semester, AY 20152016 Physics 72
0 I 2 0 I 2 0 I 2 0 I 2
A. B. C. D.
8R 4R 2R R
23. Field. A 0.50-m copper wire moves perpendicularly through a 0.60-T magnetic field at a
speed of 2.0 m/s. What is the motional emf?
24. Induced emf. A circular wire loop of radius 2.0 m has its plane oriented perpendicular to
a spatially uniform magnetic field that is changing at a constant rate of 2.0 T/s. What is the
magnitude of the induced emf in the loop?
A. 2 V B. 4 V C. 6 V D. 8 V
A. up C. right
B. left D. down
26. Half-half. A fully-charged capacitor with C = 25 mF is connected in series to a 10-H
inductor. After how many seconds does the energy from the capacitor transfer completely
to the inductor? Assume that the resistance in the circuit is negligible.
1 1
A. s B. s C. s D. s
4 8 4 8
27. ULIT. What is the energy stored in a 10-mH inductor connected to a circuit with a steady
current of 0.2 A?
A. 400 J B. 200 J C. 40 J D. 20 J
28. Crude Audio Filter. An AC signal consists of a superposition of frequencies 200 Hz,
800 Hz, and 1200 Hz. Each frequency component has the same voltage amplitude 1 V. The
signal is then fed to a capacitor C = 10 F. Which of the following statements regarding
the system is TRUE?
I. The 200 Hz signal will cause the largest peak current through the capacitor.
A9
Final Exam (Pilot Copy) First Semester, AY 20152016 Physics 72
29. Riding the LRC. What is the impedance of a series LRC circuit with zero inductance,
5
capacitance C = nF, resistance R = 900 , and angular frequency = 2 106 rad/s?
12
A. 600 B. 1200 C. 1300 D. 1500
30. Pairwise. Which of the following pairs of phasor diagrams correctly illlustrates the current
and voltage across a given circuit element?
A 10
Final Exam (Pilot Copy) First Semester, AY 20152016 Physics 72
34. Pol-pol. Unpolarized light of intensity I0 is incident on two consecutive polarizers whose
axes are 60 with respect to each other. What is the final intensity of the transmitted light?
I0 3I0 I0 3I0
A. B. C. D.
4 4 8 8
A 11
Final Exam (Pilot Copy) First Semester, AY 20152016 Physics 72
For the next three items, consider a thin lens and snow globe aligned along the same optical
axis as shown below (grid interval is 5 cm). Elsa is 15 cm in front of the converging lens, whose
focal length has a magnitude of 10 cm. The spherical snow globe, whose radius is 10 cm, is
placed 20 cm behind the lens.
36. imahe ni elsa. Where is the Elsas image formed by the lens alone?
37. Nyebe hindi olaf. Which of the following best describes this image?
38. Pasko na! The index of refraction inside the snow globe is 1.5. Where is Elsas final image
formed by the lens AND the snow globe? Ignore the effects of the snow globes thin glass
casing.
A. At the snow globes center
B. 20 cm to the left of the snow globes center
C. 5 cm to the left of the snow globes center
D. 5 cm to the right of the snow globes center
For the next two items, consider a 500-nm laser incident on two slits separated by a distance
d. The resulting interference pattern is projected on a screen 1.00 m away.
39. Liwanag sa Dilim. If successive bright fringes were observed 1.00 mm and 2.00 mm away
from the center, what is the separation distance d between the two slits?
A 12
Final Exam (Pilot Copy) First Semester, AY 20152016 Physics 72
A. 0.250 mm C. 1.00 mm
B. 0.500 mm D. 2.00 mm
40. Darkness into Light. Which of the following would decrease the spacing of the dark
fringes?
I. Increasing the wavelength of incident light
II. Increasing the slit separation
III. Decreasing the slit-to-screen distance
A 13