Scribd
Upload
196 views4 pages

Teclast Intel Tablet Android 5.0 Update Tutorial

This 3-sentence summary provides the key steps for updating the firmware on a Teclast tablet with an Intel processor to Android 5.0: Install the necessary update applications in the specified order, copy a configuration file to the flash tool directory, and use the flash tool to select the update file while holding buttons at startup to initiate the automated update process when connected to a PC. Disconnect and wait for the update to complete before using the tablet again.

Uploaded by

ad_gib
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
196 views4 pages

Teclast Intel Tablet Android 5.0 Update Tutorial

This 3-sentence summary provides the key steps for updating the firmware on a Teclast tablet with an Intel processor to Android 5.0: Install the necessary update applications in the specified order, copy a configuration file to the flash tool directory, and use the flash tool to select the update file while holding buttons at startup to initiate the automated update process when connected to a PC. Disconnect and wait for the update to complete before using the tablet again.

Uploaded by

ad_gib
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Teclast Intel powered tablets Android 5.

0 firmware update tutorial

1. Install below applications in update tool folder, please strictly follow below
order to install the applications:

a. iSocUSB-Driver-Setup-1.2.0.exe
b. IntelAndroidDrvSetup1.5.0.exe
c. ManufacturingFlashTool_Setup_6.0.51.exe

2. Copy CUSTOM_CONFIG.INI (in Firmware folder) to

C:\Program Files or Program Files (x86)\Intel\Manufacturing Flash Tool

3. Launch Manufacturing Flash Tool.exe then open Settings in File menu


Set all the parameters as below screenshot shows:

b. Click OK

d. Close the Manufacturing Flash Tool then reopen it

c. FileOPENSelect the flash_nopartition.xml file in firmware images folder


4. Power off the tablet

5. Synchronously HOLD Power, Volume+ and Volume - buttons until you see
below screen

6. Connect your tablet to PC, update will start automatically


7. Disconnect your tablet from PC until the progress bar reaches 100%
8. Done!

You might also like