BDCOM GP3600 series
High-density Rack-mounted GPON OLT
BDCOM GP3600 High-density Rack-mounted GPON OLT
Product Overview
BDCOM GP3600 complies with ITU-T G.984/G.988 and meets requirements about GPON
OLT in Network Access Technical Requirements. It fully supports CTC2.0, automatic discovery
and cooperation with ONUs of different manufacturers.
BDCOM GP3600 supports the Asymmetric uplink 1.25Gbps/downlink 2.5Gbps PON
transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide
reliable services to their users.
Its coupling ratio ups to 1:128, and its support of different hybrid ONU networks minimize the
carriers investment.
BDCOM GP3600, based on the edge-cutting technologies, is strong in functions. A few of its
functions such as QoS guarantee, SLA and DBA can be easily listed out.
GP3600-16 GP3600-08
Product Characteristics
GPON: Abiding by ITU-T G.984/G.988, BDCOM GP3600 series OLT meets relevant
requirements of GPON OLT regulated in Network Access Technical Requirements and
China Telecom GPON Technical Requirements-CTC2.0;
System Capacity: GP3600 series supports maximum 16 GPON ports.
Uplink Interface: GP3600 series with 4 gigabit SFP ports, 4 gigabit combo ports, and 4 10G
SFP+ ports.
Dimensions: 1U, occupies a small space.
Environmental Protection: low power consumption and low operating cost.
Bus Optical Fiber Protection: the link can be automatically switched when trouble occurs in
the optical fiber;
Power Characteristics: supports dual-AC, dual-DC and AC/DC power supply. The power
supply supports modularized design, hot-swap and EMC-3 standard. It well adapts to the
environment.
Technical Parameters
Attributes GP3600-16 GP3600-08
Maximum coupling ratio:1:128
System Capacity Backplane bandwidth:205G
MAC table capacity: 64K
PON 16 8
Interface 4 gigabit SFP slots, 4 gigabit TX/SFP combo ports
Uplink interface
4 10G SFP+ slots
The transmission rate with downlink 2.5Gbps/uplink 1.25Gbps
Attributes of the PON
Class B+ and Class C+ GPON module
Interface
Security: ONU authentication mechanism
ITU-T G.984/G.988
IEEE 802.1D, Spanning Tree
IEEE 802.1Q, VLAN
Standards
IEEE 802.1w, RSTP
IEEE 802.3ad physical link static/dynamic aggregation (LACP)
Ethernet II
Backpressure flow control (half duplex)
IEEE 802.3x flow control (full duplex)
IEEE 802.1p, CoS
QoS
WRR, SP and FIFO queue schedule
Limiting the uplink/downlink rate based on each ONU
DBA and SLA
VLAN Port-based VLAN
QinQ and flexible QinQ
L2 multicast
Multicast IGMP Snooping
MLD Snooping
Layer-3 routing functions Static routing, RIP and OSFP, OSFP/OSPFv3
Unidirectional Link Detection (UDLD)
Hot swap of the GPON optical module
Reliability Optical path protection of GPON (type B/C, hand-in-hand)
Abnormal luminescence ONU detection such as long
luminescence
Limiting the maximum number of users on each port
Port isolation
Network Security Packet storm control
Flow-based ACL access control function
Transmission data encryption on the PON interface
Various management modes such as CLI, SNMP and telnet
Configuration Management Conducting software upgrade through TFTP/FTP
Debug output
Dimensions mm (WDH): 442.5x304x 44
Physical Characteristics Installation: standard 19-inch rack-mount
Weight:5.25Kg
Operating environment: 0-45; 10%-85% non-condensation
Environment
Storage environment: -40-80; 5%-95% non-condensation
Input voltage: AC90240V, DC 36 ~ 72V
Power supply
dual-power input, DC/AC power supply and hot-swap
Ordering Information
Model Description
OLT with 1 console port, 1 out-band 10M/100M port, 16 fixed GPON
ports(excluding the OLT SFP optical module), 4 gigabit SFP ports, 4
BDCOM GP3600-16 gigabit combo TX/SFP ports, 4 10GE ports, a standard AC90-240V
power supplyexpandable dual power supply, 19-inch rack-mounted
installation
OLT with 1 console port, 1 out-band 10M/100M port, 16 fixed GPON
ports(excluding the OLT SFP optical module), 4 gigabit SFP ports, 4
BDCOM GP3600-16-DC gigabit combo TX/SFP ports, 4 10GE ports, a standard DC -36~-72V
power supplyexpandable dual power supply, 19-inch rack-mounted
installation
OLT with 1 console port, 1 out-band 10M/100M port, 8 fixed GPON
ports(excluding the OLT SFP optical module), 4 gigabit SFP ports, 4
BDCOM GP3600-08 gigabit combo TX/SFP ports, 4 10GE ports, a standard AC90-240V
power supplyexpandable dual power supply, 19-inch rack-mounted
installation
OLT with 1 console port, 1 out-band 10M/100M port, 8 fixed GPON
ports(excluding the OLT SFP optical module), 4 gigabit SFP ports, 4
BDCOM GP3600-08-DC gigabit combo TX/SFP ports, 4 10GE ports, a standard DC -36~-72V
power supplyexpandable dual power supply, 19-inch rack-mounted
installation
GP3600-16 OLT DC power supply (input voltage DC -36V-72V, max
PWR-200-DC
power 200W)
GP3600-16 OLT AC power supply (input voltage AC 90240V, max
PWR-200-AC
power 200W)
GP3600-08 OLT DC power supply (input voltage DC -36V-72V, max
PWR-150-DC
power 150W)
GP3600-08 OLT AC power supply (input voltage AC 90240V, max
PWR-150-AC
power 150W)
OLT SFP module, Class B+ standard, downlink 2.5G/uplink 1.25G, TX
OLT-GSFP-B+
wavelength 1490nm, RX wavelength 1310nm, SC interface
OLT SFP module, Class C+ standard, downlink 2.5G/uplink 1.25G, TX
OLT-GSFP-C+
wavelength 1490nm, RX wavelength 1310nm, SC interface
For More Information
For more information about the BDCOM P3600-16 Series OLT, please contact your local
BDCOM account representative.
Shanghai Baud Data Communication Co., LTD.
No.123, Juli Road,
Pudong Zhangjiang High-Tech Park,
Shanghai 201203, P.R.China
www.bdcom.cn
Tel: +86-21-50800666
Copyright Shanghai Baud Data Communication Co., LTD. 2015. All Rights Reserved.
This document is BDCOM Public Information.
BDCOM reserves the right to alter, update and otherwise change the information contained in the
document from time to time without notice.
