Scribd
Upload
36 views1 page

Column Design PDF

This document provides design details for a reinforced concrete column with a diameter of 800 mm and breadth of 300 mm. It specifies reinforcement details like bar diameter, cover, and spacing. It also lists load combinations considered in design including axial load and bending moments. Design checks are performed to verify that the column satisfies limit state requirements under the various load combinations. In summary, this document outlines the geometry, reinforcement, loads, and design checks for a reinforced concrete column.

Uploaded by

pandian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
36 views1 page

Column Design PDF

This document provides design details for a reinforced concrete column with a diameter of 800 mm and breadth of 300 mm. It specifies reinforcement details like bar diameter, cover, and spacing. It also lists load combinations considered in design including axial load and bending moments. Design checks are performed to verify that the column satisfies limit state requirements under the various load combinations. In summary, this document outlines the geometry, reinforcement, loads, and design checks for a reinforced concrete column.

Uploaded by

pandian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

15/10/23

Column Designation = C1
Unsupported length, l = 3
Effectve Length, l ex = 3 m
Effectve Length, l ey 3 m D = 800 mm
Depth, D = 800 mm 32 25 0 0 0 25 0 0 0 25 32
Breadth, b = 300 mm 0 0
f ck = 40 N/mm2 0 0
fy = 415 N/mm 2
0 0

B = 300 mm
Clear Cover = 40 mm 0 p t = 2.57 % 0
Max. bar dia = 32 mm 0 0
Eff. Cover, d' = 56 mm 0 A st = 61.62 cm2 0
No. of bars along D = 5 0 0
No. of bars along b = 2 0 0
Spacing b/w bars along D = 145.25 mm OK 0 0
Spacing b/w bars along b = 156 mm OK 32 25 0 0 0 25 0 0 0 25 32

Load Combination 1 2 3 Pu max. = 6090


P u (kN) 5000 2000 2000 p/fck = 0.06
M ux (kN.m) 300 830 100 ## 830 100 d'/D = 0.07
M uy (kN.m) 100 14 310 ## 40 310 d'/b = 0.19
M ecc.x (kN.m) 163.33 65.333 65.333 f ck = 40
M ecc.y (kN.m) 100 40 40 fy = 415

7000 7000
6000 6000
5000 5000
Pu (kN)
Pu (kN)

4000 4000
3000 3000
2000 2000
1000 1000
0 0
0 500 1000 0 100 200 300 400

Mux (kNm) Muy (kNm)

M ux1 (kN.m) 415.84 887.94 887.94


M uy1 (kN.m) 146.89 342.87 342.87
P uz (kN) 6090 6090 6090
P u /P uz 0.8211 0.3284 0.3284
an 2 1.214 1.214
an an
(M ux/ M ux1 ) + (M uy /M uy1 ) 0.984 0.995 0.9554
CHECK OK OK OK

You might also like