Scribd
Upload
813 views1 page

1.dead Load

The document calculates dead load for various parts of a building project. For the floor slab at EL(+4.75m), the total dead load is calculated to be 10.87 kN/m2. For the floor slab at EL(+8.55m), the total dead load is 1.15 kN/m2. Stair load is calculated to be 3.75 kN/m2 based on an assumed self weight of stair load.

Uploaded by

Dhina Karan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
813 views1 page

1.dead Load

The document calculates dead load for various parts of a building project. For the floor slab at EL(+4.75m), the total dead load is calculated to be 10.87 kN/m2. For the floor slab at EL(+8.55m), the total dead load is 1.15 kN/m2. Stair load is calculated to be 3.75 kN/m2 based on an assumed self weight of stair load.

Uploaded by

Dhina Karan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Sheet of

GERMAN STEEL

Job No Designed by
PROJECT WAVE AL FUTTAIM Dhina
Date Checked by
24.06.15
SUBJECT DEAD LOAD CALCULATION
Reference
DEAD LOAD CALCULATION
1. Floor slab at EL(+) 4.75m level
Self Weight of deck slab ( 150 mm depth ) = 3.75 kN/m2
Self Weight of wall/partition load = 1.5 kN/m2
Floor finish (stone flooring) = 1.9 kN/m2
Suspended ceiling = 0.5 kN/m2
Raised floor system = 0.72 kN/m2
Suspended MEP = 0.5
Super imposed dead load = 2 kN/m2

Total dead load = 10.87 kN/m2


10.87 - 3.75 = 7.12 kN/m2 (Applied in staad)
As concrete load added in floor load in staad
2. Floor slab at EL(+)8.55m level
Sand witch panel roof weight (approx) = 0.15 kN/m2
Suspended ceiling = 0.5 kN/m2
Suspende MEP = 0.5 kN/m2
Total dead load = 1.15 kN/m2

3.Stair load calculations


2
Self weight of stair load (Assumed) (0.15x25) = 3.75 kN/m

Contributory
Sl. No Memb. No Intensity of load UDL Remark
length
1 801 802 5009 5010 3.75 2.7 10.13
1 601 602 5011 3.75 2.7 10.13

You might also like