Afloat 2

AUG 2003
Section 2
FSG 52 thru 56
AFLOAT
SHOPPING
GUIDE
FOREWORD
PURPOSE
The purpose of this publication is to assist fleet personnel in identifying
common items of supply.
SCOPE
The selection of types and quantities of items in the ASG publication is
limited to items demanded by the afloat units. As a result, the ASG
publication does not include all valid items in the Supply System.
REMINDERS
ILLUSTRATIONS
In this publication, illustrations are representative and typical of the item(s)
described rather than exact representations, since the products of various
manufacturers may vary some what in appearance.
REFERENCE NUMBERS
Manufacturer reference numbers appearing in the Afloat Shopping Guide are
provided only where items descriptions were developed from manufacturer
drawings.
CARGO USE
To determine if an item is available from the Combat Logistics Force Ship,
refer to the latest edition of NAVSUP PUB 4998, Consolidated Afloat
Requisitioning Guide-Overseas (CARGO). If listed, we recommend the
selection and use of the items in the CARGO, because of the availability to
deployed units.
SUPPLY MANAGEMENT DATA

Refer to the current Supply Management Data found in your Requisitioning
data file for up-to-date information on unit price, unit of issue, and other
supply management data.
Table of Contents
Index of Federal Supply Groups and Classes ............................................. III
How to Use This Section .......................................................................... V
Buy Our Spares Smart Program (BOSS) ................................................... VI
Publication Distribution ............................................................................. VII
Plastic Removal in the Marine Environment (PRIME) .................................. VIII
Level 1 Fasteners .................................................................................... XI
Technical Assistance Phone Numbers ....................................................... XII
Shipboard Approved Habitability Statement ................................................ XIII
Alphabetic Index of Approved Item Names ................................................. XV
Item Descriptive Data ............................................................................... 2-1
NIIN Index .............................................................................................. 2-187
I
II
Index of Federal Supply Groups and Classes
GROUP 52
MEASURING TOOLS
FSC 5210 MEASURING TOOLS, CRAFTSMENS ................................................ 2-1
GROUP 53
HARDWARE and ABRASIVES
FSC 5305 SCREWS.................................................................................... 2-11
FSC 5306 BOLTS ....................................................................................... 2-39
FSC 5307 STUDS ...................................................................................... 2-51
FSC 5310 NUTS and WASHERS .................................................................... 2-55
FSC 5315 NAILS, MACHINE KEYS and PINS ..................................................... 2-73
FSC 5320 RIVETS...................................................................................... 2-83
FSC 5325 FASTENING DEVICES ................................................................... 2-89
FSC 5330 PACKING and GASKET MATERIALS .................................................. 2-101
FSC 5340 HARDWARE, COMMERCIAL............................................................ 2-133
FSC 5345 DISKS and STONES, ABRASIVE ....................................................... 2-149
FSC 5350 ABRASIVE MATERIALS .................................................................. 2-151
FSC 5355 KNOBS and POINTERS .................................................................. 2-153
FSC 5360 COIL, FLAT, LEAF and WIRE SPRINGS ............................................... 2-159
FSC 5365 BUSHINGS, RINGS, SHIMS, and SPACERS ......................................... 2-165
GROUP 55
LUMBER, MILLWORK, PLYWOOD and VENEER
FSC 5510 LUMBER and RELATED BASIC WOOD MATERIALS ............................... 2-177
FSC 5530 PLYWOOD and VENEER................................................................. 2-179
GROUP 56
CONSTRUCTION and BUILDING MATERIALS
FSC 5610 MINERAL CONSTRUCTION MATERIALS, BULK .................................... 2-181
FSC 5640 WALLBOARD, BUILDING PAPER, and THERMAL INSULATION MATERIALS.. 2-183
FSC 5680 MISCELLANEOUS CONSTRUCTION MATERIALS ................................. 2-185
III
IV
How to use the ASG Catalog.
Each ASG Section has a complete Federal
Supply Group/Class Index and an Alphabetical
Index.
Each Section is in numeric order beginning with

Page 1. Page Numbers are prefixed with the
corresponding Section Number, for example:
1-25 is page 25 of Section 1. Accordingly, 3-30 is
page 30 of Section 3.
V
WOULD YOU PAY
$500.00 FOR A
HAMMER?
Of course not, and Uncle Sam wont either. Weve all heard horror stories about excessive prices
being paid by the Government for supplies. Since its establishment, the Price Challenge Hotline
has saved the Government millions of dollars. The Navy is committed to continuing the programs
success in the future.
The person, best able, to identify instances of over-pricing is you, the customer. You are
encouraged to take the time to consider if the price you are being charged is fair and reasonable.
If you think youve found a case of over-pricing , please notify the Fitting Out and Supply Support
Assistance Center (FOSSAC) by calling any of the numbers listed below. FOSSAC is the central
point within the Navy for all pricing inquiries. Your challenge may also result in a cash award.
The Price Challenge Hotline voice mail, is available 24 hours per day, 7 days per week.
Toll Free: 1-(800) 628-2425
DSN: 646-2006
Commercial: (757) 443-2006
Fax DSN: 646-2019 Commercial: 757-443-2019
Web site: http://www.fossac.navy.mil
VI
Publication Distribution
Fo r Autom atic D istr ibution submit your request to NAVIC P by m a i l ,
emai l or phone. A CD - ROM of the ASG will be included with your
Cat al og.
Commanding Officer
Naval Inventory Control Point - P
Code P333343.10
700 Robbins Avenue
Philadelphia Pa 19111-5098
Email: [email protected]
Phone: DSN: 442-5647 Commercial: (215) 697-5647
Fax: DSN: 442-5914 Commercial: 215-697-5914
In cl u de your U nit I dentification C ode (UIC ), point of contact, phone

n u mb er and com plete m ailing address. For optimum response t o your
n eed s, also include your activity SNDL number.
Problem Reporting
Suspected data errors should be addressed using the DLIS Public a t i on
Feed back Car d pr ovided in the back of the catalog.
Comments, questions, suggestions and technical problems may be dir e c t e d
to:
Defense Logistics Information Service

ATTN: DLIS-KBNB
74 N Washington Avenue Suite 7
Battle Creek, Mi 49017-3084
For Inquires contact:
Defense Logistics Information Service

Customer Contact Center
DSN 932-4725 / 1-888-352-9333
Email: [email protected]
Fax: DSN 932-5305 / (269) 961-5305
VII
PRIME
PLASTIC REMOVAL IN THE MARINE ENVIRONMENT
Dumping plastic at sea is harmful to the marine environment.
Each year about 100,000 marine mammals and 1 million birds die from ingestion or
entanglement in plastic debris.
Plastic washes up near shores and on beaches, posing a litter problem.
Floating plastic can be a navigation hazard.
In accordance with the Marine Plastic Pollution Research and Control Act of 1987, U.S. Navy
ships may no longer dispose of plastic at sea.
What is being done about the problem from a supply standpoint?
The PRIME Action Team at the Navy Inventory Control Point-Mech. is working to identify
non-plastic substitutes for plastic consumables and packaging materials loaded on board ships.
As non-plastic alternatives to plastic items currently in use are identified , information will
be provided through shopping advisory messages and the Afloat Shopping Guide. To help you
shop more wisely, items recommended for shipboard use will be annotated with NP by the
National Item Identification Number.
What can you do?
Make every effort to cut down on the amount of plastic coming aboard your ship by ordering
those items annotated with NP or specified as non-plastics in the ASG in its item description.
If you know of an item packaged in or made of materials other than plastics that could
replace plastic or plastic-packaged items at your duty station, then please notify the PRIME
Program Manager by calling, Commercial (717) 605-5623 or DSN 430-5623, or by completing
and faxing (717) 605-7686 or mailing the attached form. You may also email to
[email protected]
Together, we can make a difference in saving our marine environment.
VIII
PRIME
RECOMMENDATION FOR NON-PLASTIC ITEM
Recommend that the following non-plastic item be adopted for Navy shipboard use:
Item Name
Description
NSN or Part Number
Manufacturer (or CAGE Code)
Unit of issue
Price
Other information
Can the above item be substituded for a plastic item currently being used? If so what is it?
Item Name
Description
NSN or Part Number
Manufacturer ( or CAGE Code)
Unit of issue
Price
Other information
Fill in what you can and mail to the address on the reverse side. Please sign and give us your
address and phone number should we need to contact you.
Rank/Rate Name
Address
Phone Number(s)
PRIME phone number at NAVICP-Mech is (717) 605-5623 or DSN 430-5623. Fax - (717)
605-7686 email address [email protected]
------------------------------------------------------------------------------------
DEPARTMENT OF THE NAVY
OFFICIAL BUSINESS
COMMANDING OFFICER
NAVAL INVENTORY CONTROL POINT-MECH
PRIME PM (CODE M077.A)
ATTN: VICKI EDGAR
5450 CARLISLE PIKE
PO BOX 2020
MECHANICSBURG PA 17055-0788
------------------------------------------------------------------------------------
DO NOT STAPLE!
Note: fold on the dotted lines and tape close.
THIS CATALOG IS
NOT TO BE USED
FOR OBTAINING
FASTENERS FOR
LEVEL 1 / SUBSAFE
SYSTEMS
CAUTION:
USE ONLY LEVEL 1/SUBSAFE STOCK
PROGRAM FOR YOUR SYSTEM FASTENERS.
Main and auxiliary steam and catapult steam systems with a design
temperature above 775 degess require Level 1 support. Use NAVSEA Level
1 Catalog 0948-LP-103-6010 to identify Level 1 fasteners, valves and piece
parts. For other steam system fastener requirements, consult Military
Standard 777.
Naval Ships Technical Manual 0901-LP-075-0000 (S9086-CJ-

STM-002), Chapter 075, provides additional information on the proper
identification and use of threaded fasteners.
XI
TECHNICAL ASSISTANCE
NOTE: Ask to speak to the Item Manager of your class
Defense Supply Center Columbus (DSCC) ..................................................... Phone (614) 692-2271
CLASSES: 2040, 2090, 3020, 3441, 4710, 4720, 4730, 4820, 4940, DSN 850-2271
5905, 5910, 5920, 5930, 5945, 5962, 5977, 5999,6695, 6750, 5935,
5965, 5990, 6145
Defense Supply Center Richmond (DSCR) ..................................................... Phone (804) 279-4865
CLASSES: 3040, 3110, 3130, 3433, 3439, 3455, 3456, 3460, 3940, DSN 695-4865
4010, 4030, 4130, 4140, 4240, 4810, 5130, 5940, 5970, 5975, 6135,
6140, 6160, 6645, 6670, 6685, 6810, 6830, 6840, 6850, 8120, 9150,
9320, 9330, 9340, 9350, 9390
Defense Supply Center Philadelphia(DSCP) .................................................. Phone (215) 737-2336

CLASSES: 3030, 4020, 4110, 4210, 4220, 4510, 4930, 5305, 5306, DSN 444-2336
5307, 5310, 5315, 5320, 5325, 5330, 5340, 5355, 5360, 5365, 5510,
5530, 6210, 6230, 6240, 6250, 6260, 6675, 7310, 7320, 7360, 8110,
8125, 9160, 9505, 9510, 9515, 9520, 9525, 9530, 9535, 9540
Defense Personnel Support Center (DPSC) ................................................... Phone (800) 413-6789

CLASSES: 7210, 8305, 8310, 8315, 8340, 8345, 8405, 8410, 8415,
8420, 8430, 8435, 8440, 8455, 8460, 8465, 8470 ................................
General Products Commodity Center ............................................................ Phone (817) 978-2051

CLASSES: 5345, 5350, 5610, 5640, 5680, 7240, 7290, 7330, 7340, DSN 874-3697/3698
7350, 7910, 7920, 7930, 9905, ...........................................................
USA Tank Automotive (TACOM) ..................................................................... Phone (810) 574-6245

CLASS: 2640 ..................................................................................... DSN 786-6245
National Furniture Center ............................................................................... Phone (703) 305-7003

CLASSES: 7220, 7230 ....................................................................... DSN 664-0504
Office and Supply and Paper Products .......................................................... Phone (212) 264-0479
CLASSES: 7510, 7520, 7530, 8105, 8115, 8135, 9310 .........................
Tools and Appliances Acquisition Center (GSA) ............................................ Phone (816) 926-7315
CLASSES: 5110, 5120, 5133, 5136, 5140, 5180, 5210, 8010, 8020, DSN 465-7315
8030, 8040 ........................................................................................
GSA National Customer Service Center ......................................................... Phone (800) 488-3111

CLASS: 9920 ..................................................................................... DSN 465-1416
XII
SHIPBOARD APPROVED
HABITABILITY
STATEMENT
CAUTION: THIS SECTION IS NOT TO BE USED FOR
OBTAINING SHIPBOARD APPROVED HABITABILITY
EQUIPMENT
This Afloat Shopping Guide section does not contain any shipboard approved habitability
equipment/items. Shipboard approved equipment/items are available on-line at:
http://www.dt.navy.mil/code97/9780/9783hp.html
All habitability equipment/items not identified in the above catalogs must be approved, in
writing, prior to shipboard installation. NAVSURFWARCEN SHIPSYSENGSTA Philadelphia PA
message, 171945Z Oct 97, provides specific instructions for their approval. Questions may be
directed to:
Naval Surface Warfare Center (NSWCCD-SSES)

Ship Systems Engineering Station, Carderock Division
5001 S. Broad St.
Philadelphia Naval Business Center
Philadelphia, PA 19112-1403
Attn: Code 9783
Telephone (215) 897-7317 (DSN 443-7317)
Fax at (215) 897-7343 (DSN 443-7343).
XIII
XIV
Section 1 Alphabetical Index
A MICROMETER, TUBE ................................... 2-2

SLIDE........................................................... 2-1
ABRASIVE CLOTH ASSORTMENT...................... 2-151 VERNIER ..................................................... 2-2
ANODE, CORROSION PREVENTIVE .................. 2-133 CAP,
PROTECTIVE, DUST AND MOISTURE SEAL 2-134
ASBESTOS SHEET, COMPRESSED ................... 2-101 SNAP FASTENER......................................... 2-89
CAP-PLUG, PROTECTIVE, DUST AND
B MOISTURE SEAL ............................................. 2-135
BALL ATTACHMENT, MICROMETER ................... 2-1 CASTER, SWIVEL .............................................. 2-135
BELT, ABRASIVE ................................................ 2-149 CASTOR, RIGID ................................................. 2-135
BEVEL, SLIDING T.............................................. 2-1 CATCH,
CLAMPING ................................................... 2-135
BLADE, THICKNESS GAGE ................................ 2-1
FLUSH ......................................................... 2-136
BOLT ASSEMBLY, CLAMP................................... 2-133
CEMENT, INSULATION, HIGH TEMPERATURE ... 2-183
BOLT,
CHAIN, INTERLOCKING, SLIDE FASTENER ....... 2-89
ASSEMBLED WASHER................................. 2-39
BARREL ....................................................... 2-133 CHALK LINE AND REEL ..................................... 2-2
CLEVIS ........................................................ 2-39 CLAMP,
CLOSE TOLERANCE .................................... 2-39 BRIDGE ....................................................... 2-136
EYE.............................................................. 2-39 INSTRUMENT MOUNTING ........................... 2-136
FIREBRICK ANCHOR ................................... 2-40 LOOP ........................................................... 2-136
HOOK .......................................................... 2-40
CLEVIS, ROD END ............................................. 2-137
INTERNAL WRENCHING .............................. 2-40
MACHINE ..................................................... 2-40 CLINCH PLATE, SNAP FASTENER ..................... 2-89
SELF-LOCKING............................................ 2-46 CLIP,
SHEAR......................................................... 2-46 RETAINING .................................................. 2-137
SHOULDER.................................................. 2-48 SPRING TENSION ........................................ 2-137
SQUARE NECK ............................................ 2-49
CLOSER, DOOR................................................. 2-138
TOGGLE ...................................................... 2-49
CLOTH, ABRASIVE............................................. 2-151
BOOT, DUST AND MOISTURE SEAL .................. 2-133
COATING COMPOUND, NONSLIP....................... 2-181
BRACKET, ANGLE .............................................. 2-134
COLLAR,
BUCKLE ............................................................. 2-134
GROOVED PIN-RIVET .................................. 2-83
BUILDING BOARD, HARD PRESSED, PIN-RIVET, THREADED ................................ 2-83
VEGETABLE FIBER .......................................... 2-183
CONNECTOR, ROD END.................................... 2-138
BUMPER, NONMETALLIC ................................... 2-134
CORK AND RUBBER SHEET .............................. 2-101
BUSHING BLANK ............................................... 2-165
CORK SHEET..................................................... 2-101
BUSHING,
COTTER PIN ASSORTMENT .............................. 2-75
MACHINE THREAD....................................... 2-165
NONMETALLIC ............................................. 2-165 COUPLING, CLAMP, GROOVED ......................... 2-138
BUTTON, PLUG.................................................. 2-134 CUP, COMPRESSION ......................................... 2-138
C D
CALIPER SET, MICROMETER, OUTSIDE............ 2-1 DECK AND FLOOR COVERING SURFACE
COMPOUND .................................................... 2-181
CALIPER,
HERMAPHRODITE ....................................... 2-1 DECK COVERING SEALING COATING ............... 2-181
INSIDE ......................................................... 2-1 DIAL, CONTROL................................................. 2-153
LEAD BENDER............................................. 2-1
DIAL-KNOB LOCK, ELECTRONIC COMPONENT 2-153
MICROMETER, INSIDE................................. 2-1
MICROMETER, OUTSIDE ............................. 2-2
XV
DISK, GAP SETTING.............................................. 2-4

ABRASIVE.................................................... 2-149 INJECTOR.................................................... 2-4
SOLID, PLAIN ............................................... 2-138 INJECTOR TIMING ....................................... 2-4
MARKING AND MORTISE............................. 2-4
DIVIDERS, MECHANICS .................................... 2-2
SCREW PITCH ............................................. 2-4
DOORSTOP ....................................................... 2-138 SHEET AND PLATE ...................................... 2-4
DOWEL, WOOD.................................................. 2-177 SMALL HOLE ............................................... 2-4
SURFACE..................................................... 2-4
DRESSER, CONTACT POINT.............................. 2-149
TAPER.......................................................... 2-4
TAPER-WIRE-THICKNESS, ENGINEERS ..... 2-5
E TELESCOPING............................................. 2-5
THICKNESS ................................................. 2-5
EJECTOR SPRING ASSEMBLY, TURNLOCK THREAD CUTTING TOOL ............................. 2-5
FASTENER....................................................... 2-89 TWIST DRILL AND DRILL ROD ..................... 2-6
EJECTOR SPRING, TURNLOCK FASTENER....... 2-89 TWIST DRILL AND TAP................................. 2-6
EYELET, WIRE............................................................ 2-6
METALLIC .................................................... 2-89 GASKET............................................................. 2-102
TURNLOCK FASTENER ............................... 2-90 GASKET, SPIRAL WOUND.................................. 2-111
GLIDE, FURNITURE ........................................... 2-139
F
GRAIN, ABRASIVE ............................................. 2-151
FASTENER ASSEMBLY, TURNLOCK................... 2-90 GROMMET,
FASTENER, METALLIC .................................................... 2-91
PANEL.......................................................... 2-90 NONMETALLIC ............................................. 2-91
PAWL ........................................................... 2-138
SLIDE, INTERLOCKING................................ 2-90 H
SNAPSLIDE.................................................. 2-91
TURNBUTTON ............................................. 2-91 HANDLE,
FELT SHEET ...................................................... 2-101 BAIL ............................................................. 2-139
BOW ............................................................ 2-139
FELT, MECHANICAL, PREFORMED .................... 2-101
HANDWHEEL ..................................................... 2-139
FERRULE, GROOVED CLAMP COUPLING ......... 2-139
HASP, HINGED ................................................... 2-139
FLIGHT DECK COMPOUND, NONSLIP ............... 2-181
HINGE,
BUTT............................................................ 2-140
G STRAP ......................................................... 2-141
GAGE................................................................. 2-4 HOLDER, DIAL TEST INDICATOR ....................... 2-6
GAGE PIN SET, HOLE SIZING AND LOCATING... 2-4 HOOK,
COAT AND HAT ............................................ 2-141
GAGE SET,
DOOR .......................................................... 2-141
PISTON ........................................................ 2-4
SCREW ........................................................ 2-141
SMALL HOLE ............................................... 2-4
TELESCOPING............................................. 2-5
I
GAGE,
BEARING CLEARANCE, PLASTIC WIRE....... 2-2 INDICATOR, DIAL ............................................... 2-6
CENTER....................................................... 2-2
INSERT,
CRANKSHAFT DISTORTION DIAL
INDICATING ............................................... 2-3 PANEL FASTENER ....................................... 2-92
CYLINDER ................................................... 2-3 SCREW THREAD ......................................... 2-141
DEPTH MICROMETER ................................. 2-3 INSULATION BLOCK, THERMAL......................... 2-183
DEPTH, DIAL INDICATING ............................ 2-3 INSULATION BOARD, THERMAL......................... 2-183
DEPTH, RULE .............................................. 2-3
DRILL POINT................................................ 2-3 INSULATION PIPE COVERING, THERMAL .......... 2-183
FILLET AND RADIUS .................................... 2-3 INSULATION SHEET, THERMAL ......................... 2-183
XVI
INSULATION SLEEVING, THERMAL ................... 2-183 NUT,

CONNECTOR ............................................... 2-55
K PLAIN, ASSEMBLED WASHER ..................... 2-55
PLAIN, BLIND RIVET .................................... 2-55
KEY CHAIN AND REEL....................................... 2-141 PLAIN, CAP .................................................. 2-55
PLAIN, CASTELLATED, HEXAGON ............... 2-55
KEY,
PLAIN, EXTENDED WASHER, DOUBLE
MACHINE ..................................................... 2-73
HEXAGON.................................................. 2-55
WOODRUFF................................................. 2-74
PLAIN, EXTENDED WASHER, HEXAGON ..... 2-56
KNOB................................................................. 2-153 PLAIN, HEXAGON ........................................ 2-56
PLAIN, KNURLED ......................................... 2-58
L PLAIN, RECTANGULAR ................................ 2-58
PLAIN, ROUND............................................. 2-58
LAPPING AND GRINDING COMPOUND.............. 2-151 PLAIN, SINGLE BALL SEAT, HEXAGON ........ 2-59
PLAIN, SLOTTED HEXAGON ........................ 2-59
LATCH, RIM........................................................ 2-141
PLAIN, WING................................................ 2-59
LEAF, BUTT HINGE ............................................ 2-142 SELF- LOCKING, SPLINE ............................. 2-64
LEATHER, CATTLEHIDE ..................................... 2-115 SELF-LOCKING SLOTTED HEXAGON .......... 2-64
SELF-LOCKING, ASSEMBLED WASHER ...... 2-59
LEVEL AND PLUMB............................................ 2-7
SELF-LOCKING, BARREL............................. 2-59
LEVEL, SELF-LOCKING, CAP ................................... 2-60
LINE ............................................................. 2-7 SELF-LOCKING, CASTELLATED HEXAGON . 2-60
POCKET....................................................... 2-7 SELF-LOCKING, CLINCH.............................. 2-60
LEVER HANDLE, LOCK ...................................... 2-142 SELF-LOCKING, DOUBLE HEXAGON........... 2-60
LOCK SET, SELF-LOCKING, EXTENDED WASHER,
DOUBLE HEXAGON ................................... 2-60
MORTISE ..................................................... 2-142
SELF-LOCKING, EXTENDED WASHER,
RIM .............................................................. 2-142
HEXAGON.................................................. 2-60
LOCK, SELF-LOCKING, HEXAGON ......................... 2-61
EXTERIOR ................................................... 2-142 SELF-LOCKING, KNURLED .......................... 2-62
FLUSH ......................................................... 2-142 SELF-LOCKING, PLATE................................ 2-63
RIM .............................................................. 2-142 SELF-LOCKING, ROUND.............................. 2-63
LUMBER, SELF-LOCKING, SINGLE BALL SEAT,
HARDWOOD ................................................ 2-177 HEXAGON.................................................. 2-63
SOFTWOOD, BOARD ................................... 2-177 SHEET SPRING ........................................... 2-64
SOFTWOOD, DIMENSION ............................ 2-178 SLEEVE ....................................................... 2-64
SOFTWOOD, SCAFFOLD PLANK ................. 2-178
SOFTWOOD, TIMBER................................... 2-178 O
M O-RING .............................................................. 2-115
MAGNETIC STRIP .............................................. 2-142 P

MAT, ABRASIVE ................................................. 2-152
PACKING ASSEMBLY ......................................... 2-115
METAL, EXPANDED............................................ 2-185
PACKING MATERIALS ........................................ 2-116
MICROMETER, OUTSIDE ................................... 2-7
PACKING WITH RETAINER ................................. 2-125
MOLDING, COVE BASE...................................... 2-185
PACKING, PREFORMED..................................... 2-118
MOUNT, RESILIENT ........................................... 2-142
PADLOCK........................................................... 2-143
N PADLOCK SET ................................................... 2-143
PAPER,
NAILS................................................................. 2-74 ABRASIVE.................................................... 2-152
GASKET....................................................... 2-125
XVII
PIN, RING,
COTTER....................................................... 2-75 DEE ............................................................. 2-167
GROOVED, HEADED .................................... 2-75 EXTERNALLY THREADED ............................ 2-167
GROOVED, HEADLESS ................................ 2-75 RETAINING .................................................. 2-168
HOLLOW ...................................................... 2-76 RIVET,
LOCK ........................................................... 2-76 BLIND .......................................................... 2-84
QUICK RELEASE ......................................... 2-76 SOLID .......................................................... 2-85
RETAINING .................................................. 2-77 SPLIT ........................................................... 2-86
SHOULDER, HEADED .................................. 2-77 TUBULAR..................................................... 2-87
SHOULDER, HEADLESS .............................. 2-77
SPRING ....................................................... 2-78 ROD, CONTINUOUS THREAD ............................ 2-49
STRAIGHT, HEADED .................................... 2-79 ROUGE, ABRASIVE............................................ 2-152
STRAIGHT, HEADLESS ................................ 2-80 RUBBER ROUND SECTION................................ 2-128
STRAIGHT, THREADED................................ 2-81
RUBBER SHEET,
TAPERED, PLAIN.......................................... 2-81
TOGGLE, EYE COLLAR................................ 2-81 CELLULAR ................................................... 2-128
SOLID .......................................................... 2-128
PIN-RIVET, SOLID, CLOTH INSERT ................................ 2-129
GROOVED ................................................... 2-83
THREADED .................................................. 2-83 RUBBER STRIP.................................................. 2-129
RULE,
PLATE, MOUNTING ............................................ 2-144
CIRCUMFERENCE ....................................... 2-7
PLUG, MULTIPLE FOLDING..................................... 2-7
ANODE RETAINING...................................... 2-144 STEEL, MACHINISTS................................... 2-8
EXPANSION ................................................. 2-144
MACHINE THREAD....................................... 2-166
MACHINE THREAD, MAGNETIC ................... 2-167
S
PROTECTIVE DUST AND MOISTURE SEAL . 2-144
SAND, SANDBLAST............................................ 2-152
VENT ........................................................... 2-144
WOOD.......................................................... 2-178 SCREW,
ASSEMBLED WASHER................................. 2-11
PLUMB BOB....................................................... 2-7
ASSEMBLY PANEL ....................................... 2-11
PLYWOOD.......................................................... 2-179 CAP, HEXAGON HEAD ................................. 2-11
PLYWOOD, CAP, SOCKET HEAD .................................... 2-15
CONSTRUCTION.......................................... 2-179 CLOSE TOLERANCE .................................... 2-17
DECORATIVE ............................................... 2-179 DRIVE .......................................................... 2-19
EXTERNALLY RELIEVED BODY.................... 2-19
POINTER, DIAL .................................................. 2-158
LAG.............................................................. 2-20
POST, SNAP FASTENER .................................... 2-92 MACHINE ..................................................... 2-20
PROTRACTOR, MECHANICS, BEVEL ................. 2-7 SELF LOCKING ............................................ 2-29
SHOULDER.................................................. 2-31
PUMICE, TECHNICAL......................................... 2-152
TAPPING ...................................................... 2-31
PUSH ON NUT ................................................... 2-64 TAPPING, THREAD FORMING ...................... 2-32
WOOD.......................................................... 2-32
R SEAL,
ANTI-PILFERAGE ......................................... 2-144
RECEPTACLE,
PLAIN ENCASED.......................................... 2-129
POSITIVE LOCK ........................................... 2-92 STRAPPING ................................................. 2-145
TURNLOCK FASTENER ............................... 2-92
SETSCREW ....................................................... 2-33
RETAINER,
NUT AND BOLT ............................................ 2-144 SHEET, NONMETALLIC, PROTECTIVE................ 2-131
PACKING...................................................... 2-126 SHIM .................................................................. 2-172
TURNLOCK FASTENER EJECTOR SPRING . 2-93 SLIDE, DRAWER, EXTENSION ........................... 2-145
RING RETAINING ............................................... 2-93 SLIDER AND PULL, INTERLOCKING SLIDE
FASTENER....................................................... 2-94
XVIII
SNAP, HOOK ...................................................... 2-145 TRAMMEL HEADS.............................................. 2-10

SOCKET, SNAP FASTENER................................ 2-94 TURNBUCKLE.................................................... 2-146
SOUND CONTROLLING BOARD......................... 2-184 TURNBUCKLE BODY.......................................... 2-147
SOUND CONTROLLING FELT............................. 2-184
SPACER,
W
PLATE .......................................................... 2-173
WASHER,
RING ............................................................ 2-173
CONVEX ...................................................... 2-64
SLEEVE ....................................................... 2-174
FINISHING ................................................... 2-64
SPRING, FLAT ............................................................ 2-64
HELICAL, COMPRESSION............................ 2-159 KEY.............................................................. 2-68
HELICAL, EXTENSION ................................. 2-164 KEYWAY ...................................................... 2-69
SQUARE, LOCK ........................................................... 2-69
CARPENTERS............................................. 2-8 RECESSED .................................................. 2-70
COMBINATION ............................................. 2-8 SHOULDERED AND RECESSED .................. 2-70
TRY.............................................................. 2-9 SPLIT ........................................................... 2-70
SPRING TENSION ........................................ 2-70
STANDOFF, THREADED, SPACING ..................... 2-51
WEATHER STRIP ............................................... 2-185
STAPLE .............................................................. 2-82
WEDGE, WOOD ................................................. 2-178
STEEL GRIT....................................................... 2-152
WHEEL, ABRASIVE ............................................ 2-150
STONE ASSEMBLY, SHARPENING ..................... 2-149
STONE, WINDOW DIAL ................................................... 2-158
COMMUTATOR SURFACING......................... 2-149 WOOL, METALLIC .............................................. 2-152
ELECTRICAL CONTACT BRUSH SEATER ..... 2-150
SHARPENING .............................................. 2-150 Y
STOP, INTERLOCKING SLIDE FASTENER .......... 2-94
YARDSTICK........................................................ 2-10
STRAIGHTEDGE ................................................ 2-9
STRAP,
LINE SUPPORTING ...................................... 2-145
RETAINING .................................................. 2-145
WEBBING..................................................... 2-146
STRAPPING ....................................................... 2-146
STRIKE, CATCH ................................................. 2-146
STUD ASSEMBLY, TURNLOCK FASTENER......... 2-94
STUD,
BALL ............................................................ 2-51
CONTINUOUS THREAD ............................... 2-51
PLAIN........................................................... 2-51
POSITIVE LOCK ........................................... 2-97
SHOULDERED ............................................. 2-52
SNAP FASTENER......................................... 2-97
TURNLOCK FASTENER ............................... 2-97
WELDING..................................................... 2-52
T
TAPE MEASURING, REPLACEMENT .................. 2-10
TAPE, MEASURING ............................................ 2-9
THUMBSCREW .................................................. 2-37
TRAMMEL .......................................................... 2-10
XIX
XX
GSA Tools and Appliances Acquisition Center
Phone (816) 926-7315
DSN 465-7315
GROUP 52
MEASURING TOOLS
CLASS 5210
MEASURING TOOLS, CRAFTSMENS
NOTE: As non-plastic alternatives to plastic items currently in use are identified, information will be provided through shopping advisory
messages and the Afloat Shopping Guide. To help you shop more wisely, items recommended for shipboard use will be annotated
with NP by the National Item Identification Number.
BALL ATTACHMENT, 01-010-4522 CALIPER SET, MICROMETER,

MICROMETER OUTSIDE
CALIPER, HERMAPHRODITE
Snap-on ball attachment for outside Six caliper set. Gauging range 0 to 6 inches, in
micrometers. Hardened Steel ball in retainer Firm-joint type with adjustable point. Transfer units of 10,000 of an inch. With ratchet stop and
converts flat ends of 1/4 inch diameter anvils and design feature not included. lock-nut. Case type container.
spindles for measuring wall thickness of tubing,
sleeves, and other parts with rounded surfaces. 00-554-7134
Ball diameter of each ball used must be
subtracted from micrometer reading. Ball
CALIPER, SLIDE
diameter shown in inches.
Stainless Steel pocket slide caliper. Inside and
01-435-6804 6 in. size outside measuring. Graduated in 32nds and
64ths on slide edge and 32nds on stock back.
CALIPER, INSIDE
General purpose inside calipers. Polished Steel
Ball Dia construction. Class and size in inches as noted.
00-494-1737 .200
00-494-1738* .200 Lock-joint type with sensitive adjustment device.
00-494-1739 .250
* .270 inch diameter spindle.
BEVEL, SLIDING T
Sliding T bevel with hardwood handle. Locks to Blade Lg/In.
hold Steel blade at desired angle. 00-224-9942 3
00-221-2091 5
Size/In.
00-229-3041 24 CALIPER, MICROMETER, INSIDE
Spring joint type, flat leg. Solid or quick English measure inside micrometers. Range as
adjustable nut. noted. All supplied with wood case. Class as
indicated.
Blade Lg/In. Jaw type. Caliper type jaws with lock screws.
00-278-0645 8 1,000ths inch graduations.
BLADE, THICKNESS GAGE

Size/In.
English system feeler stock. With rounded ends,
12 inches long by 1/2 inch wide. Without holder. 01-434-9440 4
With end hole. 00-229-3060 8
00-132-5693 CALIPER, LEAD BENDER

Range/In.
CALIPER, DIAL Plastic, measurement scale graduated in .100
inch increments. With 2 gauging probe tips, 2 00-221-1918 .200 to 1.000
ENGLISH MEASUREMENT. Stainless Steel, vertical mount forming posts and 1 locking
range 0 to 6 inches by .001 inch increments. screw. Rod and Sleeve type, Head graduations
Measures inside, outside and depth. Furnished 1,000ths inch. Furnished with measuring rods
with fitted case. 00-050-5118 and collars.
2-1
CLASS 5210
CALIPER, MICROMETER, TUBE
English reading tube micrometer. Enameled
frame with ball type anvil, 1,000ths inch
graduations. With wood case.
00-273-9793
Range/In.
00-221-1919 1 to 2
00-221-1921 2 to 12 DIVIDERS, MECHANICS
00-293-1652 8 to 36
Layout and scribing dividers. Polished Tool Steel
Tubular, interchangeable head set. Class 3, construction. Size as noted. Type as indicated.
Range/In.
Head graduations 1,000ths inch. Furnished with
5 adjustable measuring rods and 1 handle. 00-293-0042 0 to 1 Spring type, flat rectangular legs.
Range/In. CALIPER, VERNIER Solid nut adjustment.

00-293-3523 1-1/2 to 8
English measurement vernier calipers.
CALIPER, MICROMETER, Hardened Tool Steel, inside and outside
OUTSIDE measurements. Direct inside measurement
reading range 0.5 to 36 inches. Outside
English reading outside micrometers. Range as measurement range 0.0 to 36 inches
noted. With enameled frames, ratchet stop, lock
nut, and wood case. Closed nib width 0.5 inch. Jaw depth 2.75
inches.
Fixed solid anvil type, Style A. 10,000ths inch Size
graduations. 00-266-7038 4
00-263-0378 6
00-263-0376 8
00-267-3371 10
Split nut adjustment.

Size
00-293-1701 12
00-222-4565 Wing-type with fine adjustment device.
Range/In.
00-540-2973 0 to 1 English Metric scale vernier calipers. Hardened
00-243-2933 1 to 2 Tool Steel calipers for measuring inside and
00-221-1945 2 to 3 outside diameters. Graduated on front side,
00-221-1934 3 to 4 0.001 inch. and on reverse side 1/50 millimeter
00-255-7564 4 to 5 for direct outside readings. For inside
00-221-1948 5 to 6 measurements, the total width of the closed nibs
00-250-0870 7 to 8 must be added to the caliper readings. Supplied
00-790-1901* 8 to 9 with case.
* 1,000ths inch graduations Size
Closed nib width 0.250 inch. Depth of jaws 1.250 00-266-7047 12
Interchangeable Anvil type, Style B. 1,000ths inches.
inch graduations. With perforated frame. GAGE, BEARING CLEARANCE,
Furnished with standards and anvils as Range/In.
PLASTIC WIRE
indicated, in wood case. 00-250-4761 0 to 6 (outside)
.250 to 6 (inside) Unit of issue includes box of 12. Clearance range
color, and Dana Corporation part number
Closed nib width .300 inch. Depth of jaws 2.250 indicated.
inches.
Range/In. Color Pt/No.
Range/MM 00-640-6177 .001 to .003 Green PG-1
00-293-2913 .003 to 300 (outside) 00-640-6178 .002 to .006 Red PR-1
.300 to 300 mm (inside) 00-640-6176 .004 to .009 Blue PB-1
00-234-8017 000 to 600 (outside)
300 to 600 (inside)
GAGE, CENTER
CHALK LINE AND REEL U.S. standard 60 degree center gage. Handy
Std/In. Anvil/In. Range/In. gage for use in grinding and setting screw cutting
50 foot chalking line in metal case. Self chalking; tools. With scale for determining threads per inch
00-223-9158 2,3,4,5 0,1,2,3 2-6
with hook ring and hand crank rewind. and table of double depth of threads for
00-287-3336 6,7,8 0,1,2 6-9
determining size of tap drills. Graduated in 14ths
00-287-3337 9,10,11 0,1,2 9 - 12
and 20ths on one side, 24ths and 32nds on other
side. Ground gaging surfaces.
2-2
CLASS 5210
60 degree lines, 6 inches long.
00-221-1899
Flat rule with non-graduated base.
00-222-4000
GAGE, CRANKSHAFT
DISTORTION DIAL INDICATING
Range/In.
Steam boiler engine strain gage. For checking 00-684-9944 0 to 3
the distortion of engine shafts and frames.
Usable on all diesel engine shafts and center Knife-edge 2-1/2 inch base type with
crankshafts of any type engine or compressor. jewel-bearing dial indicator. Dial graduated in
Furnished with dial indicator, ten sharp pointed 0.0005 inch units, reading 0-25-0. Furnished
rods, one extension, one balancing attachment with push down needle point and case.
and wood case. Dial graduated in .001 inch units 00-221-1902
and reads 0-20-0, one turn equaling .040 inch
Range, 2-3/8 to 18 inches. Calibrated numerically in 32nds from 0 to 1 inch.
With pocket clip and round indicating sleeve.
00-357-5951
Range/In. GAGE, DRILL POINT

00-710-4359 0 to .125
59 degree drill point grinding gage. 6 inch hook
GAGE, DEPTH MICROMETER rule graduated in 64ths, 32nds, 16ths, and 8ths.
Sliding head with 1 inch tongue graduated in
00-494-1776 32nds along 59 degree bevel face, adjusts and
Multiple rod micrometer depth gages. One inch
movement. Graduations in 1,000ths inch. locks to any position.
GAGE, CYLINDER Furnished with 3/32 inch diameter rods, ratchet
stop and wood case.
Cylinder bore gage. For use in determining
tapered, out-of-round or scored cylinders.
Furnished with dial indicator mounted on block
alignment slide with 2 fixed contact points,
locking device, toggle-joint handle, and
extension rods. Dial graduated in .001 inch units
and reads 0 to 100, one turn equaling .100 inch.
Range 2-1/2 to 9 inches.
2-1/2 in. base

Rod/ Gauge/
Dia Range Rods
00-221-1932 1/8 0 to 6 in. 6 00-221-2072
00-826-5368 3/32 0 to 12 in. 12
GAGE, FILLET AND RADIUS
4 inch base
Stainless Steel. 16 blades/single end, or 8
Rod/ Gauge/
Dia Range Rods blades/double end, encased. 2 blade
group/single end blades, or 1 blade
00-619-4045 5/32 0 to 6 in. 6 group/double end blades, with or without a blade
lock; .266 blade radii. Blade sizes: .031, .047,
5 inch base .063, .078, .094, .109, .125, .141, .156, .172,
Rod/ Gauge/ .188, .203, .219, .234, and .250 inch thick.
00-494-1774 Dia Range Rods
00-542-4602 3/32 0 to 10 in. 10
GAGE, DEPTH, DIAL INDICATING
GAGE, DEPTH, RULE
Dial depth gages. For measuring holes,
recesses, slots, etc. 2.500 inch long by 1.200 6 inch depth gages. Flat Steel rule graduated in
inch wide base with indicator. Range as noted. 32nds one side, 64ths other side. Hardened
Steel head with clamping device.
Flat base type. With plain-bearing adjustable dial
indicator. Dial graduated in .001 inch units, Combination depth and angle gage. With flat
reading 0 to 100. Furnished with 2 extra rods and hook rule and nongraduated rod. One side of
case. head marked, both right and left, with 30, 45, and 00-273-9867
2-3
CLASS 5210
Right angle shape, 5 gauging surfaces. Sizes: GAGE, MARKING AND MORTISE GAGE SET, PISTON
9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32. and
1/2 inch thick. With leatherette case. Carpenters Steel scratch gage. Single-face Consists of 1 each thickness gage set; 1 each
head With 2 thumbscrews, and 2 sliding bars spring scale; 1 each swivel assembly.
graduated in 16ths or 32nds over 5 inch length.
00-116-1631
GAGE SET, SMALL HOLE

For internal measuring. Range in decimals. Size
(A) .125 to .200, (B) .200 to .300, (c) .300 to .400,
00-246-8833 and (D) .400 to 500.
GAGE, GAP SETTING 00-449-7014
Folding gap setting gages. Metal holder GAGE, SHEET AND PLATE
equipped with gap-adjusting tool.
00-237-8574
U.S. standard sheet metal gage. Circular, for
Angular wire-feeler type. With 8 bent wire sizes: gauging uncoated sheet, Plate Iron and Steel.
.010, .012, .015, .018, .020, .022, .025, and .030 GAGE PIN SET, HOLE SIZING AND Gage number range: Numbers 0 to 36. Decimal
inch diameter and tension lock. LOCATING equivalents on reverse side. 3-1/4 inch diameter
3/32 inch thick.
00-273-1935 Steel, pin sizes 120, 110, 100, and 090.
Angular wire-feeler type. With 8 bent wire sizes: 00-074-0881

.022, .025, .027, .028, .030, .032, .035, and .040
inch diameter and tension locking device and GAGE, SCREW PITCH
gap adjusting tool.
00-278-1248 Folding screw pitch gages for 60 degree threads.
00-244-7771* Measures American National or sharp V form
* Without locking device or gage adjusting internal and external threads. Steel case with
tool. locking device. Each blade permanently marked
With respective number of threads per inch 00-221-2448
Straight blade-feeler type (9): .002, .003, .004, (TPI).
.006, .008, .012, .013, .020, and .025 inch. Also GAGE, SMALL HOLE
angular wire-feeler type (6): .015, .018, .025, 27 blades; range 2-1/4 to 28 TPI, American
.030, .035, and .040 inch. Folding construction National. Includes center gage with coarse and Expandable-ball small hole gages. Knurled
type, with gap adjusting tool. SPECIAL fine notches. handle with sensitive adjustment. Hardened ball
FEATURE: 2 inch rule with knife edge measuring surface with 2 point contact.
combination Carbon scraper and file. 00-221-1992
00-031-1504 28 blades; range 4 to 80 TPI, Sharp V.
Straight blade-feeler type. With 6 blades, sizes: 00-293-1872 Size Range

.015, .018, .020, .025, and .030 inch thick. 00-221-2080 A .125 to .200
51 blades; range 4 to 84 TPI, American National. 00-221-2081 B .200 to .300
00-189-9538 00-221-2082 C .300 to .400
00-221-2083 D .400 to .500
00-203-7763
GAGE, INJECTOR
METRIC. 28 blades, encased blade type - GAGE, SURFACE
Steel. Base - 4 inches long by 4 inches wide by double blade/group. Sizes .25 to .90 in 5
millimeter increments: 1.00, 1.10, 1.20, 1.25, Universal surface gage. Hardened Steel base,
1/4 inch thick; body 1-5/8 inch diameter by 3-7/8
1.30, 1.40, 1.50, 1.60, 1.70, 1.75, 1.80, 1.90, approximately. 2 13/16 inches minimum and 3
inch length. Internal configuration designed to
2.00, and 2.50 millimeter. 1/2 inches maximum, V grooved for circular
accept Detroit Diesel Engine Series 53 and 71 work; gage pins in each corner of the base for
injector bodies. Furnished with dial indicated for linear work. 8 3/4 inch minimum and 12 1/4 inch
checking tip concentricity. 00-221-1991 maximum spindle with scriber clamp. Remove
spindle and insert scriber in lower clamp for
00-990-3327 GAGE bench work. Front of base with V notch for
universal settings.
GAGE, INJECTOR TIMING SET, GAP SETTING AND THICKNESS
00-221-1842
Steel, Black-Oxide; Chromium or Nickel surface 28 gages with handles. Thickness gage sizes:
treatment, 3-9/16 inch length. Working end .151 .002, .002 - Brass, .003, .004, .005, .006, .007 - GAGE, TAPER
inch minimum diameter for 1.438 inch minimum Phosphor Bronze, .010: Gap setting gage sizes:
reduced to .090 inch minimum diameter for .266 .006, .008, .010, .012, .015, .018, .020, .025, Used for measuring slot width; .020 to .375 inch
inch on tip. .030, .035, .037, .040, .045, .050, .055, .060, width range. Smallest unit of graduation .010
.065, .070, .075, and .080. inch 2 blades.
00-474-6400
00-448-3624 00-399-3715
2-4
CLASS 5210
GAGE, TAPER-WIRE-THICKNESS, Blades are 3-1/4 inches length by 1/2 inch width. by 1,000ths; .020, .022, .024, .025, .028, .030,
ENGINEERS Sizes .0015, .002, .003, .004, .005, .006, .007, .032, and .035 inch. thick. 1/2 inch width by 3 inch
.008, .009, .010, .011, .012, .013, .014, .015, length.
11 blade combination feeler-taper wire gage. .016, .018, .020, .022, .024, .025, .028, .030,
Provided with 9 feeler blades, sizes: .002, .003, .032, and .035 inch thick. 00-223-9191
.004, .006, .008, .010, .012, .015, and .062. A
taper gage blade with taper range from 1/64 to 29 blade feeler gage. Sizes: .004, .006, .008,
3/16 inch by 64ths one side; other side has a 3 .010, .013, .015, .017, .018, .038, .040, .041,
inch scale graduated in 8ths and 16ths. Also has .044, .047, .050, .053, .056, .059, .060, .062,
a Birmingham Standard wire gage blade with .065, .068, .071, .074, .200, .230, .260, .290,
sizes numbered from 19 to 36, plus extra slots .320, and .350 inch thick. Chromium Plated. 1/2
1/16 inch to 1/8 inch one side, reverse side gives inch width by 1-1/2 inch length.
decimal equivalents in 1000ths of an inch.
Blades fold into metal case, with a blade lock. 00-189-9518
Straight blade type, With 2 groups of blades.

00-804-2660
Straight blade types with one group of blades. 22 blade feeler gage, With 3 inch point file. 10
blades 3 inch length sizes: .002 through .008,
8 blade feeler gage, sizes: .002, .004, .006, .008, .010, .013, and .015 inch thick, 12 blades, 1-3/4
.010, .012, .016, and .020 inches thick, 1/2 inch inch length, Sizes: .011, through .020, .022, and
width by 3 inch length. .025, inch thick.
00-242-3926*
00-363-7573 * Non- Spec item.
9 blade feeler gage. Sizes: .0015, .002, .003, Tapered blade types with one group of blades.
00-221-2047 .004, .006, .008, .010, .012, and .015 inch thick,
1/2 inch width.
GAGE, TELESCOPING Lg/In.

00-517-8096 6
Telescoping gage with self-centering handle. 00-517-8097 9
Knurled handle holds and locks telescoping
plungers. Sizes and range as noted. 13 blade feeler gage, Sizes: .0015, .002, .003,
.004, .006, .008, .010, .020, .030, .040, .075,
.100, and 200 inch thick. 1/2 inch width by 4-1/2
inch length. Without a blade lock.
00-246-2303 11 blade feeler gage. Sizes: .002 through .012

inch thick by 1,000ths. Without a blade lock. 1/4
17 blade feeler gage, sizes: .010, .012, .013, inch width by 15 inch length.
.015, .016, .017, .018, .019, .020, .022, .024,
00-671-2275*
.025, .026, .028, .030, .032 and .035 inch thick.
* Non- Spec item.
Size Range 1/4 inch width by 1-3/4 inch length.
00-221-2084 AA 5/16 to 1/2 14 blade feeler gage. Sizes: .0015, .002, .003,
00-221-2085 A 1/2 to 3/4 00-250-6245
.004, .006, .008, .010, and 4 each of .025 and 3
00-221-2086 B 3/4 to 1-1/4 each of .125 inch thick, 1/4 inch width by 12 inch
00-221-2087 C 1-1/4 to 2-1/8 20 blade metric measure feeler gage. Sizes: .05,
length.
00-221-2076 D 2-1/8 to 3-1/2 .10, .15, .20, .25, .30, .35, .40, .45, .50, .55, .60,
00-221-2077 E 3-1/2 to 6 .65, .70, .75, .80, .85, .90, .95, and 1.0
millimeters thick. 1/2 inch width by 3 inch long 00-223-9194
blade.
GAGE SET, TELESCOPING 26 blade feeler gage. Sizes: .0015, .002, .0025,
00-045-3526 .003 through .025 inch thick by 1,000ths. 1/4 inch
Complete set of 6 telescoping gages in Vinyl width by 3 inch length.
case. Range 5/16 to 6 inches. Contains 1 each of
25 blade feeler gage. Sizes: .0015, .002, .003,
the following NSNs: 5210-00-221-2076, -2077, 00-221-1999
.004, .005, .006, .007, .008, .009, .010, .011,
-2084, -2085, -2086, and -2087. Sizes AA
.012, .013, .014, .015, .016, .017, .018, .019,
through E.
.020, .021, .025, .027, .030, and .040 inch thick. Tapered blade type with two groups of blades.
1/2 inch width by 3-5/16 inch. long. GSA
00-473-9350 replacement tool, to ensure uniformity and
economical operation. GAGE, THREAD CUTTING TOOL
GAGE, THICKNESS
01-335-1616 29 degree Acme screw head gage. Standard
English measure thickness (Feeler) gages. gage for grinding and setting tools when cutting
Tempered Steel blades fold into metal frame. 26 blade feeler gage. Sizes: .0015, .002, .0025, Acme threads. Pitch range (Threads Per Inch -
With blade lock, unless noted. .003, through .025 inch thick by 1,000ths. 1/2 TPI). Numbers 1 to 10, 3-3/8 inch length by 1-5/8
inch width by 3 inch length. inch width.
Bent end blade type with one group of blades.
00-274-2857
25 blade feeler gage with 30 degree bend, 5/8
inch length from bend to tip. Without blade lock. 26 feeler gage. Sizes: .0015, .002 through .018
2-5
CLASS 5210
GAGE, WIRE .0005 inch units, reading 0-25-0, range 0 to .125
inch. Supplied with adjustable offset arm,
American Standard wire gage. Circular, for reducing bushing, tool post holder, stanchion
gauging nonferrous metal sheets, plates and base (without stop) and regular contact point.
wire. Gauging number range, numbers 0 to 36.
Decimal equivalents on reverse side. 3-1/2 inch
diameter by 3/32 inch thick.
00-243-2100
GAGE, TWIST DRILL AND DRILL

ROD
Fractional (Jobbers) drill gage. Drill size range, 00-293-3016
1/16 to 1/2 by 64ths. Each hole marked with its 00-238-3106
size in inches and decimal equivalent. 6-1/4 inch Contact point on rim, plunger action. 2-1/4 inch
length by 2-5/16 inch width by 5/64 inch thick. HOLDER, DIAL TEST INDICATOR diameter bezel. Dial graduated in .001 inch units,
reading 0-100, range 0 to 1.000 inch. Adjustable
00-273-9865 Magnetic base indicator holder with holder rod.V dial setting type. Regular contact style bearing.
slotted, 3-1/2 inch length by 1-1/8 inch width by 1 Tell tale hand included.
Handy drill and Steel wire gage. Drill size range inch height base fits flat or round surfaces, holds
Numbers 1 to 60. Each hole marked with its drill in any position on Iron or Steel. 6 in. nonmagnetic 00-243-9649
gage number and decimal equivalent. 5-1/2 inch Stainless Steel holder rod fits standard 1/4 inch
length by 1-1/2 inch width by 5/64 inch thick. indicator back lugs, moves in ball socket for Contact point on rim. Plunger action. 2-3/16 inch
universal settings. diameter bezel. Dial graduated in .0001 inch
units, reading 0-5-0, range 0 to .025 inch, jewel
bearing. Adjustable dial range 0 to .025 inch,
jewel bearing. Adjustable dial type. Includes
base with upright post. Without cushioned
movement, lifting lever or tell tale hand.
00-432-9235
Contact point on extended body, swivel action. 1

inch diameter bezel. Dial graduated in .001 inch
00-390-5446 units, reading 0-15-0, range 0 to .030 inch.
Supplied with universal shank and clamp and
INDICATOR, DIAL adjustable 2 ball contact points.
Adjustable dial test indicators. Dial indicators

Drill Size with accessories.
Range/Nos
00-221-1893 Contact point on back, plunger action. 2-3/16
00-555-7993 61-80. inch diameter bezel. Dial graduated in .001 inch
units, range 0 to .200 inch. Adjustable dial setting
GAGE, TWIST DRILL AND TAP type. Supplied with hole attachment, arbor
clamp, tool post holder with upright spindle and 00-223-9648
Handy tap and drill gage. Drill size range, clamp, regular cone, and mushroom contact
numbers 1 to 60. Each hole marked with its drill points. Contact point on extension arm end. Lug on
gage number and decimal equivalents. Table center mounting style. 3.625 inch diameter dial
lists correct size tap drill and body drill for with a 5 inch measuring capacity. Fixed dial
popular 2-56 to 1/4-28 NC and NF series. 6-1/4 setting marked 0-100 inch .001 graduations.
inch length by 2-7/16 inch width. 5/64 inch thick. Regular contact point style.
00-111-3681
Contact point on extension arm end. Swivel

action, 2 ball contact point style. Dial graduated
in .0001 inch units, reading 0-4-0, range 0 to .008
inch. Jewel bearing, cushion movement feature
included. Adjustable dial type. With clamp
Dial attachment tool and post holder. SPECIAL
Reading Type FEATURE: Reversing levers, nonmagnetic.
00-377-6525 0-50-0 3 Packed in box.
00-277-8840 0-100 4
00-273-9791
Contact point on bottom rim, plunger action.
00-221-1894 2-1/4 inch diameter bezel. Dial graduated in Contact point on extension arm end, 2 ball swivel
2-6
CLASS 5210
action. 1-1/8 inch diameter bezel. Adjustable LEVEL, POCKET PLUMB BOB
dial, graduated in .001 inch units, reading
0-15-0, range 0 to .030 inch. Jewel bearing. Tell Midget pocket level. Plated Brass and Aluminum Polished Brass plumb bob, 8 ounce weight size.
tale hand included. Supplied with clamp body with end caps. Nonadjustable level vial. 1/2 With detachable hardened Steel point. 7 foot
attachment and tool post holder. inch width base, 3 inch length. length of braided Silk or Linen line. Accurately
centered. Lacquer finish.
00-273-9790
00-238-3299
Non-Spec Types
00-223-9604 Solid Brass plumb bob, 20 ounce weight size.
Cup type 1/2 inch manual throttle valve dial Top and point are nonremovable. Special
indicator. 2.065 inch inside diameter, 2.130 inch Feature: Has 1/8 inch Graduations.
outside diameter, .060 inch thick, .810 inch LEVEL AND PLUMB
height. 0-9 equally spaced markings on outer 00-238-1734
circumference. 3/8 inch hexagon shaped hole in Level and plumbs with fixed or adjustable vials
center. as specified.
PROTRACTOR, MECHANICS,
01-319-3357 CARPENTERS BEVEL
Nonreversible type head without level, 4 inch
Contact point on rim. Plunger action. 3-5/8 inch
length. Revolving dial. Disc graduated 90 to 0 to
diameter bezel. Adjustable dial - .500 inch
90 degree. With 1 vernier scale 5 minute
capacity with .001 graduations. 0-50-0 dial
minimum reading. Blade hardened 7 inch length
marking. Surface contact point mounting style.
by 1/2 inch width.With 1 acute angle attachment,
Regular contact point style. Jewel bearing with
hardened 12 inch length by 1/2 inch width.
tell tale hand.
Aluminum, side-reading. Double-faced stock
00-177-4191 with 1 level vial.
Lg/In.
Contact point on rim. Plunger action. 2-1/8 inch
diameter bezel. Adjustable dial - 2 inch capacity 00-239-0892 24
with .001 inch graduations. 0-100 dial marking. 00-926-5430 28
00-1727-2081 48
Continuous mounting. style. Regular contact
point style. Jewel bearing with tell tale hand.
Single face design with Cast Iron body.
Adjustable cross test level plumb vials. .005 inch
00-410-6607
per foot vial graduations.
Contact point located on the back. 1-1/2 inch Lg/In. 00-390-5610
diameter adjustable dial. Measurement capacity 00-223-9607 12
.200 inch graduated in .00100 inches. Dial
marked 0 to 100. Contact point is a plunger Torpedo (Pocket) type. Single faced wood, RULE, CIRCUMFERENCE
action type. Aluminum or Magnesium stock with one each
level-plumb, and 45 degree vial, 9 inch length Tinsmiths circumference rule. Polished flexible
00-203-9354 overall. Nonadjustable. Steel rule, graduated in 16ths one edge.
Circumference reading, graduated in 8ths other
Contact point located on the stem. Lug on center 00-516-3356 edge. Reverse side with layout data for dry and
mounting with 1-11/16 inch. Fixed dial. Dial liquid measures.
marked 0-50-0 in .00100 inch graduations. MASONS
Contact point is a regular plunger style.
Measurement capacity is .250 inch. And
indicator dial comes in a box.
00-127-7955
LEVEL, CYLINDRICAL, CIRCULAR VIAL Lg/In. W/In. Thk/In.

Aluminum, side-reading. Double faced stock with 00-132-5699 36 1.250 .062
Nonadjustable Brass single face design. 7/8 inch 2 level vials in pairs, and 4 plumb vials in pairs, 00-243-3350 48 1.250 .062
base diameter by 25/64 inch high. Ground 48 inch length.
surface with bubble type vial. Special Features: RULE, MULTIPLE FOLDING
Chrome Plated with three mounting holes. 45 00-720-7982
minutes sensitivity. 6 foot hardwood rules with 12 sections. 5/8 inch
width, outside reading, 12 section rules with
00-081-6052
MICROMETER, OUTSIDE metal joints and ends. Both faces graduated in
16ths each edge. White or Yellow enameled
Range-thimble 0 to 1 inch with .0001 inch
finish.
LEVEL, LINE graduations. Counter 00.00 to 25.40 millimeter
with .01 millimeter graduations.
Nonadjustable Aluminum and Brass line level. Standard Duty
Single face design, 3 inch length. Unground vial 01-130-8881
surface.
00-223-9606
2-7
CLASS 5210
Front face graduated in 64ths and 100ths of an SQUARE, COMBINATION
inch, rear face in 16ths and 32nds.
Carpenters try and miter square. Steel or Cast
Lg W Iron square and miter head with spirit level,
00-273-1965 6 3/4 scriber, and knurled clamp nut. Grooved, Steel
00-273-1960 36 1-3/16 blade graduated in 16ths and 8ths of an inch on
one side, and 16ths and 32nds on the other.
Flexible Approximately 1/2 inch wide 1/64th inch
thick. Thin and flexible, spring tempered. Lg/In.
00-241-3599 12 blade
Front face is graduated in 10ths and 100ths of an
00-293-3393 inch, and rear face is graduated in 32nds and Machinists combination squares. Cast Iron
64ths. heads. Square head with spirit level, hardened
Heavy Duty Steel scriber, and knurled clamp nut. Grooved,
Lg/In. tempered Steel blade graduated in 32nds and
With 6 inch extension slide, 12 section. Brass 00-971-8827 6 64ths of an inch on one side, and 50ths and
slide for inside measurements in first fold. 100ths on the other.
Front face is graduated in 32nds and 64ths, rear
00-293-3511 face in 8ths and 16ths. Blade with square head only.
Lg/In.
RULE, STEEL, MACHINISTS 00-243-3351 4
Tool-Steel machinists rules. Right hand reading. Front face is graduated in 32nds and 64ths of an
English measure for each graduated edge. inch, and rear face in 50ths and 100ths of an
Length as noted. inch.
No. Lg W
00-204-1283 3 6 1/2
00-827-0707 16 24 3/4
Lg/In.
SQUARE, CARPENTERS
00-078-8948 12 blade
One-piece Steel squares. Polished finish. Size
as specified. Outside edge length, width of body Blade with square and center heads.
and tongue as noted.
Rigid-Spring tempered approximately 3/64ths
inch thick, width as noted.
Face graduated in 10ths and 50ths of an inch.

Lg W
00-826-8298 6 3/4
Front face graduated in 32nds, 16ths, 8ths, and

1/4 of an inch. Rear face graduated in halves and Lg/In.
inches, millimeters and centimeters. Corrosion 00-078-8947 12 blade
Resistant Steel. Dimensions listed in inches. 00-078-8950 24 blade
Lg W Thk
Tapered squares. Body and tongue faces Groved Blade with square, center and reversible
00-362-5100* 6.250 .469 .020 protractor head with level. Hardened Steel,
* Non-Spec item. tapered from .070 inch minimum to .135 inch
square/miter head material. Blade graduated
maximum 12 by 1-1/2 inch body, 8 by 1 inch
1/64, 1/32, 1/16, and 1/8.
Front face graduated in 32nds and 64ths of an tongue. Front faces graduated in 64ths and
inch, rear face in 8ths and 16ths. 32nds of an inch, 16ths and 8ths on the back. Lg/In.
Size 12. 00-450-6920 12 Blade
Lg W
00-234-5223 6 3/4 24 by 2 inch body, 16 by 1-1/2 inch tongue. Front Blade with square, center and reversible
00-234-5224 12 1 faces graduated in 16ths and 8ths of an inch; protractor head with level.
00-243-3367 18 1-3/16 12ths, 16ths and 10ths on the back. Rafter or
forming brace octagon. Essex board measure
Front face graduated in 32nds and 64ths of an 100ths scale inscribed. Size 24.
inch, rear face in .500 and 1.000 millimeters.
Rigid, Tool or Stainless Steel material.
00-273-1948
Lg W
00-725-7347 6 3/4 24 by 2 inch. body, 16 by 1-1/2 inch tongue. Front
faces graduated in 16ths and 4ths of an inch,
Front face graduated in 1/100 and 1/64th of an 12ths and 4ths on the back. Inscribed with Brace
inch, rear face 1/32nd and 1/64th of an inch. table and Essex board measure. Size 24.
Lg W 00-810-3490 Lg/In.
00-293-0565 24 1-3/16 00-078-8949 12 blade
2-8
CLASS 5210
Blade with square head and center head, edges, except the first 6 inches or more on the
graduated in 8ths and 16ths of an inch on one one edge is graduated in 32nds inches. Features
side, 32nds and 64ths inch on the other. a belt hook, positive locking device to position
blade, Black and Red markings on White or
Lg/In. Yellow surface and a Chrome Plated case.
00-224-9937 6 blade
00-540-3513 12 blade Lg/Ft
00-182-9893 12
Square miter head scriber included, with 00-150-2920 16
grooved blade. Center head not included.
Special Feature: English and metric graduations. 1/2 inch wide Steel measuring tape. Butt end
Chrome Plated Steel ribbon with Black case with automatic rewind mechanism.
Lg/In. markings. Graduated in 32nds for the first 6 inches and in
01-037-0486 12 in. blade Lg/Ft 16ths for the remainder. Markings on one side
only. Foot numbers in Red and stud marks every
00-234-6744 25 16 inches.
SQUARE, TRY 00-234-6745 50
Lg/Ft
Carpenters try square. Hardened Steel blade. Corrosion Resistant Steel ribbon with Etched 00-078-3905* 12
Graduated in 8ths both sides, securely fastened markings. * Non Spec Item
to smooth-finished hardwood handle. Inside
edge length of blade and beam as noted. Lg/Ft
1/2 inch wide Steel measuring tape with an
00-221-1882 100 automatic spring rewind. Graduations in inches
and feet with the smallest graduation 1/16 inch.
White-enameled Steel ribbon with Black Chrome case with a blade lock, belt clip, rubber
markings. Graduated in feet, 10ths and 100ths bumper, reinforced blade tip and first 6 inches of
one side only. Vinyl covered case. the blade graduated in 32nds.
Lg/Ft Lg/Ft
00-221-1888 100 01-335-1611 10
01-335-1612* 12
1/2 inch wide Steel, self supporting measuring 01-139-7444 25
tape. Butt end case, pull-push winding method. * Blade width 3/4
Lg/In. Graduated in 16ths inch one edge millimeters on Blade width 1 inch
00-221-2051 8 other edge.
Lg/In 1 inch wide Steel measuring tape with an
Machinists try square. Extremely accurate
automatic spring rewind. Graduations in inches
precision square without graduations. Hardened 00-245-0301 78.4 and feet with the smallest graduation 1/16 inch.
Steel blade and beam permanently attached. Chrome case; blade lock; stud marking every 16
Furnished with a case. Inside edge length of Graduated 32nds inch first 12 inch upper edge inches; belt clip; rubber bumper and reinforced
blade and beam as noted. and 16ths inch both edges exclusive of first 12 blade tip.
inches of upper edge. Chrome Plated.
Lg Lg/Ft
00-277-7440 3 in. blade, 1-3/4 in. beam Lg/Ft
01-335-1614 25
00-190-3339 6 in. blade, 3-1/4 in. beam 00-540-2560 12
5/8 inch wide woven Synthetic fiber tape with a
3/4 inch wide Steel tape. Graduated 16ths inch moisture resistant Plastic coating. Graduated in
STRAIGHTEDGE top and bottom edges. 32nds inch for the first 12 1/4 inch and feet units. Black markings on White
inches, with a belt clip. surface. Round case of Vinyl covered Corrosion
Machinists straight edge with square edges, not
graduated. Semi-hard Corrosion Resisting Lg/Ft Resistant Steel with crank handle for quick hand
Steel. Length width and thickness, listed in rewinding of tape.
00-054-1011 12
inches. Lg/Ft
1/2 inch wide enameled Steel, self supporting 00-554-7085 50
Lg W Thk measuring tape. Butt end case, automatic 00-554-7087 100
00-174-3231 24 1.75 .125 rewind. Graduated in 32nds for first foot, 8ths
and inches for remainder, both edges. Special 1/2 inch wide self-supporting Steel tape rules.
One edge beveled, one edge square. Feature: brake to hold blade at any extension. Butt end metal case with pull-push rewind.
Lg W Thk Lg/Ft Graduations in inches, 16ths, and 32nds. Both
edges start at outside edge of hooks.
00-264-6400 36 3 .281 00-081-4719 8
TAPE, MEASURING Epoxy coated Steel ribbon. Upper edge of blade

is graduated in millimeters. The first 12 inches of
Distance measuring tapes for general use. the lower edge is graduated in 32nds and the
remainder of the lower edge in 16ths. Butt type
Graduated length as noted.
end, furnished with a case. Automatic rewind,
1/2 inch wide. One side measures 10 feet, other Chrome/Nickel Plated blade with Black
3/8 inch wide Steel tapes for machinists and side measures 3 meters. markings.
mechanics. Leather or Vinyl covered metal case
with hand crank and rewind. Graduations in feet, 00-086-4988 Lg/Ft
inches, and 8ths, on one side only, start at 00-293-3505 10
outside end of ring. 3/4 inch wide, Plastic coated self supporting
tape. Butt end case, with automatic rewind White Enameled Steel blade with Black
mechanism. Graduated in 16ths inch both markings.
2-9
CLASS 5210
Lg/Ft Lg/Ft
00-287-3335 6 00-221-1885 25
00-221-1886 50
Non-Spec Items 00-221-1887 75
3/4 inch wide Steel measuring tape. Standard 1/2 inch wide Steel, with Satin Chrome finish,
graduations in meters, inches and feet. Butt end. tank gaging tape. Graduated in inches and feet.
Automatic spring rewind. Graduated in 16ths Smallest graduation 1/8 inch. Reel type
inches one edge and metric other edge. One enclosure with hand crank and 20-1/4 ounce
side 10 feet, other side 3 meters. plumb bob.
Lg/Ft
00-545-5615 00-221-1848
01-217-7264 75
3/4 inch wide Steel measuring tape. Case or reel
enclosure. Accessory components: push button
1/2 inch wide Steel, tank gaging tape. Graduated TRAMMEL HEADS
in inches and feet. Smallest graduation 1/8 inch.
release, belt clip, and ten reference tables on
Black graduations and markings on light rust Bronze, Brass, Zinc Alloy, or Steel. Adjustable.
back. Tables include: nail sizes, screw head
resistant background. Reel type enclosure with Includes removable Steel scriber points, locking
types, wood screw sizes, decimal equivalents,
hand crank. screws, fine adjustment and pencil attachment.
working properties of wood, standard lumber
sizes, standard door sizes, hinge sizes, Steel Lg/Ft
pipe specifications and Copper tubing
01-357-4178 100
dimensions. Special Features: First foot
graduated in 32nds, remainder in 16ths. Tape
markings shall be Black and/or Red on a White TAPE MEASURING,
or Yellow background. REPLACEMENT
Lg/Ft
Replacement tape for tank level gauges. 1/2 inch
00-182-4797 12 wide Steel tape with swivel-snap on one end.
Black graduations (in feet, inches and meters) on
1 inch wide Plastic surface treated Steel tape, light rust resistant background.
with butt end type case enclosure. Automatic 00-221-1850
spring winding method and belt hook. Graduated Lg/Ft
in 16ths inch, general purpose type. 00-293-1739 25 YARDSTICK
Lg/Ft 00-293-1740 50
00-347-2591* 75 Aluminum. Both faces with Black graduations in
01-085-6104 16 * raised type marking 16ths on one edge and 8ths on the other. Hole at
one end for hanging. 1 inch minimum width, 1/16
Tank level gauging tapes. 1/2 inch wide Steel Replacement tape for tank level gauge. 1/2 inch inch minimum thickness.
tape. Black markings graduated in feet, inches, wide Steel. Smallest graduation 1/8 inch, with
and 8ths. Steel frame with hand crank reel raised type marking.
rewind and taper wiper. Supplied with 20 ounce 00-985-6610
plumb bob and swivel snap. Lg/Ft
Polished hardwood. Both faces with Black
00-347-2613 50
graduations. One face graduated in 8ths on one
edge, and 1/4, 1/2, and 3/4 fractions of a yard on
TRAMMEL other face. Both ends with Brass caps and holes
for hanging.
Trammels and replaceable points are intended
to be used by craftsmen for laying out work and 00-243-3349
measuring distances between points too great
for ordinary dividers.
Steel extension beam and points, fine

adjustment 36 inch range. Includes 2 caliper
points, 2 scribers, and 1 wooden case.
2-10
Defense Supply Center Philadelphia
Phone (215) 737-2336
DSN 444-2336
GROUP 53
HARDWARE AND ABRASIVES
CLASS 5305
SCREWS
SETSCREW 1/4-20 UNC-3A

Lg
* CRES Lg
Steel composition 316 fasteners. .750 inches
long with right thread 20-3A. Headless style with 01-227-6396* 1.312
D5 internal hexagon drive and plastic locking Pan head. Slot drive. Furnished with flat external * Cadmium and Chromate surface treatment
feature. F20 cup point style. teeth washer.
SCREW, CAP, HEXAGON HEAD
W 1/4-20 UNC-2A
00-929-6558 .250 Copper Alloy
01-389-8015 .500 Lg
00-901-3077 .875
SCREW, ASSEMBLED WASHER
SCREW, ASSEMBLY PANEL
Iron Alloy
Steel, Cadmium and Chromate Treatment
Fillister extended washer head style. Cross
1/4-20 UNC-2A
recess internal drive with flat washer. Cadmium Flat countersunk 100 degree head. 160,000 PSI
and Chromate overall surface treatment. Green minimum tensile strength. Three .040 inch wide Fas Lg
threads. Fastener length listed in inches. splines in shank and 120 degrees apart, double 00-527-5555 .500
lead thread. Grumman Aerospace part number 00-543-5828 .750
No. 10-32 UNJF-3A given. 00-550-3934 1.000
Lg 00-550-3935 1.250
1/4-28 UNF-3A 00-558-7182 1.500
01-296-7806 .500 00-558-7358 2.000
Lg P/N 00-576-5746 2.500
Steel 01-084-4706 .777 GS520CK4-02 00-550-3936 3.000
01-084-4707 .917 GS520CK4-04 00-550-3924 4.000
Flat countersunk 82 degree head. Slot drive. 01-084-4708 1.057 GS520CK4-06
Furnished with countersunk external teeth 01-116-7368* 1.337 CA21070-4-10HS 5/16-18 UNC-2A
washer. * Three splines in shaft, Ford Aero part
number 29732. Fas Lg
1/4-20 UNC-2A 00-011-6549 1.000
3/8-24 UNF-3A
Lg
3/8-16 UNC-2A
00-877-7437 .375 Lg P/N
01-175-0610* .935 Fas Lg
Steel, Cadmium Plated * Hexagon internal drive head, .219 00-543-4718 .750
inch width across flats. 00-004-7111 1.000
Flat countersunk 82 degree head. Slot drive. 00-576-2124 1.500
Furnished with countersunk external teeth CRES 00-655-9440 1.750
washer. 00-558-8364 2.000
Countersunk head, 100 degree angle. 00-655-9441 2.250
No. 10-32 UNF-2A 00-263-7536 2.500
No. 8-32 UNJC-3A 00-639-8053 3.000
Lg 00-558-5426 3.500
00-206-8750 .500 Lg 00-530-9136 4.000
00-492-2949 .605
Flat countersunk 100 degree head. Phillips 1/2-13 UNC-2A
recess drive. Furnished with spring tension HEXAGON HEAD, SLOT DRIVE.
washer. Fas Lg
No. 10-32 UNF-2A 00-530-9134 1.000
No. 10-32 UNJF-3A 00-655-9442 1.250
Lg 00-655-9443 1.500
Lg 01-164-4481 1.250 00-550-3923 1.750
01-081-7360* .562 01-163-9296 1.375 00-550-3931 2.000
2-11
CLASS 5305
Fas Lg Fas Lg Fas Lg
00-558-8365 2.500 00-208-1429 1.375 01-372-3542 .750
00-119-7452 3.000 00-021-3740 1.500 01-372-0788 1.000
00-655-9444 3.500 01-423-1329 1.730 01-389-8028 2.000
00-655-9445 5.000 00-847-1159 1.750
00-638-9837 2.000 5/16-18 UNC-2A
5/8-11 UNC-2A 01-423-5041 2.200
00-822-5853 2.500 Fas Lg
Fas Lg 01-422-9929 4.425 01-372-3543 .562
00-655-9446 1.500 00-431-5926 5.500 01-372-3544 .625
00-576-5745 1.750 01-399-6586 .750
00-655-9447 2.000 1/2-13 UNC-2A 01-372-3545 1.125
00-531-9108 2.500
00-550-3925 3.000 Fas Lg 3/8-16 UNC-2A
00-655-9448 3.500 01-422-6463 .985
00-637-9433 4.000 00-021-3801 1.250 Fas Lg
00-655-9449 5.000 01-422-9270 1.470 01-199-1332 .690
00-021-3806 1.500 01-371-7943 .735
3/4-10 UNC-2A 01-422-6121 1.730 01-371-7937 .985
00-727-6804 1.750 01-371-8467 1.000
Fas Lg 01-423-1089 2.200 01-371-7938 1.110
00-655-9451 2.500 01-423-5039 2.450 01-371-7939 1.230
01-113-4018 3.000 01-422-9361 2700 01-371-7940 1.355
00-655-9452 3.500 01-422-9259 4.450 01-389-8016 1.500
00-655-9453 4.500 01-422-7937 4.950 01-371-7941 1.610
01-371-8458 3.220
3/8-24 UNF-2A 1/2-20 UNF-2A
7/16-14 UNC-2A
Fas Lg Fas Lg
00-727-1281 .750 00-702-4524 1.500 Fas Lg
00-939-0800 2.250 01-371-8459 1.470
3/8-24 UNF-3A 01-371-8460 1.720
5/8-11 UNC-2A
Fas Lg 1/2-13 UNC-2A
00-616-2470* 1.500 Fas Lg
* Non Spec Item. 01-423-4735 .610 Fas Lg
01-422-7307 1.937 01-371-8461 .735
CRES, Passivated 01-422-6589 2.190 00-813-3792 2.500
01-422-7298 2.450
01-422-9602 2.700 5/8-11 UNC-3A
1/4-20 UNC-2A
01-422-8601 3.950
Fas Lg Fas Lg
00-719-3997 .500 3/4-10 UNC-2A 01-389-8012 1.250
00-021-3616 .625 00-584-7947* 3.000
Fas Lg * Nickel Alloy
00-702-4523 .750
00-021-3620 .875 00-947-7052 1.750
00-207-8253 1.000 00-948-0667 2.000 1-8 UNC-2A
00-579-5238 1.125 01-423-4732 2.200
01-423-4729 2.450 Fas Lg
00-021-3668 1.250
01-422-6116 1.444 01-371-8464 1.500
00-616-6370 1.750 1-8 UNC-2A
00-702-9070 2.953 Nickel- Copper Alloy, Uncoated
Fas Lg
01-422-9312 2.953
00-476-7475 3.250 01-422-7444 2.000 1/4-20 UNC-2A
01-081-5443 2.500
Fas Lg
1/4-20 UNC-3A
1/4-28 UNF-2A 00-174-4007 .500
Fas Lg 00-174-4008 .750
Fas Lg 00-174-4009 1.000
00-121-2996 .750
00-052-1457 .500 00-174-4010 1.250
00-688-2020 .625 00-174-4011 1.500
5/16-18 UNC-2A 00-685-3511 .750 00-174-4012 1.750
Fas Lg 00-688-2018 .875 00-174-4013 2.000
00-456-2430 1.250 00-174-4015 2.500
01-422-7467 1.219
00-826-7009 1.625 00-290-7156 3.000
3/8-16 UNC-2A 3/8-24 UNF-3A 5/16-18 UNC-2A
01-423-0132 .485 00-616-2471 1.000 00-282-9648 1.000
00-632-2777 .750
00-282-9649 1.250
00-576-5417 1.000 High temperature service. 00-282-9646 1.500
00-721-5665 1.125
00-717-5467 1.250
1/4-20 UNC-2A 3/8-16 UNC-2A
2-12
CLASS 5305
00-174-4028 .500 00-226-9238 2.750 00-269-2803 1.000
00-174-4029 .750 00-269-2811 2.500
00-174-4030 1.000 Steel, SAE Grade 2, Zinc Plated
00-174-4031 1.250 1/2-13 UNC-2A
00-174-4032 1.500 1/4-20 UNC-2A. Plain screw head.
01-163-8247 1.750 Fas Lg
00-174-4033 2.000 Fas Lg 00-044-4153 1.000
00-174-4034 2.250 00-299-2379 2.000
00-174-4035 2.500 1/2-20 UNF-2A
00-174-4037 3.000 Hexagon head.
Fas Lg
7/16-14 UNC-2A 3/8-16 UNC-2A 00-226-7767 1.000
00-725-4183 1.500
Fas Lg Fas Lg 00-226-7768 2.000
00-174-4040 .750 01-283-3605 .985 00-716-8174 4.250
00-174-4041 1.000 00-299-2370 2.000
00-174-4042 1.125 5/8-11 UNC-2A
00-174-4043 1.500
Steel, SAE Grade 5, Cadmium Plated Fas Lg
00-174-4045 2.000
00-174-4047 2.500 00-724-7218 1.000
Screw head marked with 3 radial lines located
00-724-5910 1.469
1/2-13 UNC-2A 120 degrees apart. 00-724-6761 2.750
00-724-5914 3.000
Fas Lg 1/4-20 UNC-2A 00-724-5936 3.500
00-174-4053 1.000 00-724-6760 4.500
00-174-4054 1.250 Fas Lg
00-724-6758 5.000
00-174-4055 1.500 00-068-0500 .500 00-724-6762 6.000
00-174-4056 1.750 00-225-3838 .562
00-174-4057 2.000 00-068-0501 .625 3/4-10 UNC-2A
00-174-4058 2.250 00-068-0502 .750
00-174-4059 2.500 00-071-2237 2.000 Fas Lg
00-226-9196 3.000 00-071-2233 3.000 00-050-4212 1.750
00-226-9198 3.500 00-939-9204 2.000
5/16-18 UNC-2A 00-939-9206 3.500
5/8-11 UNC-2A 00-939-7063 4.000
Fas Lg
Fas Lg 00-225-9081* 1.250 7/8-9 UNC-2A
00-226-9201 1.000 * Non Spec Item
00-226-9202 1.250 Fas Lg
00-226-9203 1.500 7/16-14 UNC-2A 00-929-4041 3.500
00-226-9204 1.750 00-904-3748 5.000
00-226-9205 2.000 Fas Lg
00-226-9206 2.250 00-071-1784 .750 1-8 UNC-2A
00-226-9207 2.500 00-050-1076 1.500
00-226-9208 2.750 00-042-9477 2.000 Fas Lg
00-226-9209 3.000 00-969-3142 3.500
00-226-9210 3.250 9/16-12 UNC-2A
00-226-9211 3.500 Screw head drilled for locking wire.
00-226-9213 4.000 Fas Lg
00-716-8204 1.000
5/16-18 UNC-2A
3/4-10 UNC-2A 00-716-8197 4.000
Fas Lg
Fas Lg 51/4-28 UNF-2A 00-753-4322 1.000
00-226-9216 1.500
00-226-9217 1.750 Fas Lg
3/8-16 UNC-2A
00-226-9218 2.000 00-068-0504 .500
00-226-9219 2.250 Fas Lg
00-226-9220 2.500 5/16-24 UNF-2A 00-018-7069 2.125
00-226-9221 2.750
00-226-9222 3.000 Fas Lg
7/16-14 UNC-2A
00-226-9223 3.250 00-225-9093 1.469
00-226-9224 3.500 Fas Lg
00-226-9226 4.000 3/8-16 UNC-2A 00-951-2620 1.750
7/8-9 UNC-2A Fas Lg
1/2-13 UNC-2A
00-269-3206 .500
Fas Lg 00-269-3211 1.000 Fas Lg
00-226-9230 2.000 00-269-3217 1.250
00-964-0589 2
00-226-9232 2.500 00-269-3218 2.500
00-165-8074 3
00-226-9234 3.000
3/8-24 UNF-2A
3/8-24 UNF-2A
1-8 UNC-2A
2-13
CLASS 5305
1/2-13 UNC-2A
Fas Lg Fas Lg
00-912-5113 .875 Fas Lg 00-269-3238 1.250
00-732-0512 .750 00-269-3239 1.375
Finished head. 00-732-0511 1.125 00-269-3240 1.500
00-071-2067 1.250 00-269-3241 1.750
1/4-20 UNC-2A 00-071-2068 1.375 00-269-3242 2.000
00-071-2069 1.500 00-269-3244 2.500
Fas Lg 00-071-2070 1.750 00-269-3246 3.000
01-296-7819 .98 00-071-2071 2.000 00-269-3248 3.500
00-071-2072 2.250
3/8-16 UNC-3A 00-071-2073 2.500 7/16-20 UNF-2A
00-071-2074 2.750
Fas Lg 00-071-2077 3.500 Fas Lg
01-098-6144 1.250 00-071-2079 4.000 00-709-8517 1.000
00-071-2081 4.500 00-709-8523 1.250
1/2-13 UNC-2A 00-071-2083 5.000
01-032-2312 6.000 1/2-20 UNF-2A
Fas Lg
01-285-7723 .985 5/8-11 UNC-2A Fas Lg
01-100-0596* 1.500 00-719-5219 1.250
Fas Lg 00-725-0154 1.375
01-283-6469 1.735
* Non Spec Item. 00-724-7219 1.250 00-719-5235 1.750
00-724-7221 1.750 00-719-5238 2.000
Non Spec Item. 00-724-7222 2.000 00-719-5240 2.500
00-724-7223 2.250 00-719-5243 3.000
00-724-7224 2.500
3/8-16 UNC-3A
00-724-7228 3.000 5/8-18 UNF-2A
Fas Lg 00-724-7247 3.500
00-724-7254 4.000 Fas Lg
00-206-6786 3.750
00-415-2138 .875
3/4-10 UNC-2A 00-726-2551 2.000
Steel, SAE Grade 8, Cadmium Plated
00-726-2552 2.250
Fas Lg 00-726-2553 2.500
Screw head marked with 6 radial lines located 60 00-900-1118 1.500 00-726-2555 3.000
degrees apart. 00-922-7994 2.500 00-726-2556 3.250
00-947-4353 2.750 00-726-2567 5.000
1/4-20 UNC-2A 00-947-4354 3.000
00-947-4362 5.000 3/4-16 UNF-2A
Fas Lg
00-068-7837 .625 7/8-9 UNC-2A Fas Lg
00-068-0508 .750 00-948-0803 3.000
00-071-2505 .875 Fas Lg 00-947-2309 3.750
00-225-3843 1.000 00-964-0508 2.000
00-225-3842 1.125 00-905-2700 2.500 Steel overall, Grade 8, Non Spec Items
00-068-0509 1.250 00-907-0033 3.000
00-225-3841 1.375 00-934-0262 4.500 5/16-18 UNC-2A
00-071-2509 1.500
00-071-2510 1.750 1-8 UNC-2A 01-205-3189 .938
00-071-2513 2.500 00-226-4831* 1.469
00-071-2519 4.000 Fas Lg * Zinc and Chromate Treated
00-925-7635 2.500
3/8-16 UNC-2A 00-940-8068 3.000 Steel, SAE Grade 8, Cadmium Plated
00-964-0557 4.000
Fas Lg 00-932-3280 4.500 1/4-28 UNF-2A
00-721-5492 .625
01-140-9118 .875 1/4-28 UNF-2A Fas Lg
00-543-2419 1.125 00-905-2712 2.250
00-068-0511 1.250 Fas Lg
00-688-2111 1.375 00-267-8952 .500 Screw head drilled for locking wire.
00-725-2317 1.500 00-267-8953 .625
00-821-3869 1.750 00-068-0515 1.000
00-782-9489 2.000 1/4-20 UNC-2A
00-068-0516 1.125
00-846-5703 3.000 00-267-8954 1.250 Fas Lg
00-781-3927 3.500 00-267-8956 1.500
00-781-3928 4.000 00-914-6130 .500
00-267-8958 2.000
00-964-0503 5.000 00-267-8962 3.000
3/8-16 UNC-2A
7/16-24 UNC-2A 3/8-24 UNF-2A Fas Lg
Fas Lg Fas Lg 00-115-9526 .750
00-071-1786 1.000 01-010-2362 .875
00-269-3234 .750 00-942-2196 1.000
00-071-1788 1.250 00-269-3235 .875
00-071-2059 2.500 00-269-3236 1.000
1/2-13 UNC-2A
2-14
CLASS 5305
00-915-8087 1.250 00-068-5276 .250 00-959-1909 .625
00-959-0379 .375 00-958-6517 .750
Steel, Phosphate Coated 00-068-5414 .500 00-068-8431 .875
00-068-5405 1.000
5/8-11 UNC-2A No. 6-32 UNC-3A 00-068-5407 1.500
Fas Lg Fas Lg 1/4-28 UNF-3A

01-092-6071* 3.250 00-051-6751 .250
* Non Spec Item. 00-959-0382 .375 Fas Lg
00-990-6381 .625 00-225-7773 .625
Steel, SAE Grade 8, Phosphate Coated 00-068-5415 .750 00-958-7667 .750
00-225-7774 1.000
Drilled for locking wire. No. 8-32 UNC-3A
3/8-24 UNF-3A
Fas Lg
1/4-20 UNC-2A Fas Lg
00-988-7601 .375
Fas Lg 00-988-7602 .500 00-068-8202 1.000
00-988-7603 .625
00-841-5181 .500
00-988-7604 .750 1/2-13 UNC-3A
Steel, Zinc and Chromate coated Fas Lg
No. 10-24 UNC-3A
00-051-8606 1.000
Non Spec Items. Fas Lg 00-983-6647 1.500
00-988-7607 .375 01-424-6553 1.500
3/8-16 UNC-2A 00-988-7608 .500 00-226-7609 2.500
00-989-3119 .625
00-942-2196* .985 00-273-5571 .625 5/8-11 UNC-2A
00-068-0510 1.000 00-988-7609 .750
* Drilled for lockwire. 00-988-7610 .875 Fas Lg
00-952-1432* 2.500
SCREW, CAP, SOCKET HEAD 1/4-20 UNC-2A * Non Spec Item.
FLAT CHAMFER HEAD, HEXAGON RECESS Fas Lg Drilled heads

DRIVE 01-252-5291 .750
No. 10-32 UNF-3A
Undrilled heads 1/4-20 UNC-3A
Fas Lg
Fas Lg 00-068-5398 .375
00-988-7612 .500 00-988-5308 .625
00-988-7613 .625
00-988-7614 .750 1/4-28 UNF-3A
00-988-7615 .875
00-988-7616 1.000 Fas Lg
CORROSION RESISTANT STEEL 00-988-7834 1.250 00-055-2797 .500
00-988-7835 1.500 00-983-9653 .625
(CRES) 00-988-7836 1.758 00-957-5897 .750
00-281-4538* 2.500
* Non Spec Item. 5/16-24 UNF-3A
1/4-20 UNC-3A
Fas Lg 5/16-18 UNC-3A Fas Lg
01-372-3539 .625 00-834-3388 1.000
Fas Lg
00-988-7838 .750 No. 6-32 UNC-3A
3/8-16 UNC-2A
00-988-7840 1.000
Fas Lg 00-988-7841 1.250 Fas Lg
01-372-2311 1.750 00-954-8942 .375
3/8-16 UNC-3A 00-848-9282 .500
1/2-13 UNC-2A Fas Lg
1/4-20 UNC-3A
Fas Lg 00-981-3512 .750
01-389-8753 1.750 00-988-7844 .875 Fas Lg
00-990-0668 1.000 00-207-4017 .750
00-988-7845 1.250
No. 2-56 UNC-3A
00-226-7238 1.750 Nickel-Copper Alloy
Fas Lg 00-988-7848 2.000
00-052-7495 2.500
00-068-5409 .204 1/4-20 UNC-3A
00-068-5410 .250
00-068-5411 .375 No. 10-32 UNF-3A Fas Lg
00-068-5412 .500 Fas Lg 00-543-5945 1.000
00-057-4593 .375
No. 4-40 UNC-3A 3/8-16 UNC-3A
00-052-6456 .500
2-15
CLASS 5305
00-806-2582 1.000 00-978-9396 1.500 00-983-6670 .875
00-983-5334 1.750 00-983-6671 1.000
1/2-13 UNC-3A 00-978-9397 2.000
00-983-5335 2.250 3/8-24 UNF-3A
Fas Lg 00-983-5336 2.500
00-655-9467* 1.000 00-983-5338 3.000 Fas Lg
* 6 Holes 00-983-7448 1.000
1/2-13 UNC-3A 00-983-7449 1.250
Steel, Cadmium Plated
Fas Lg 7/16-20 UNF-3A
Undrilled head 00-983-7460 1.000
00-187-9934 1.250 Fas Lg
No. 4-40 UNC-3A 00-158-0758 1.500 00-051-8608 1.250
00-983-7462 1.500
Fas Lg 00-983-7463 1.750 1/2-20 UNF-3A
00-978-9342 .250 00-983-8083 2.000
00-983-7467 3.000 Fas Lg
00-978-9344 .625
00-958-7483 3.500 00-983-7424 2.000
No. 6-32 UNC-3A 00-983-8075 2.500
5/8-11 UNC-3A
Fas Lg 5/8-18 UNF-3A
Fas Lg
00-978-9346 .250
00-983-7477 2.000 Fas Lg
00-978-9347 .375
00-978-9349 .625 00-983-7479 2.500 00-983-8081 2.250
00-978-9350 .750 00-983-8074 1.250
00-978-9352 1.000 3/4-9 USC-3A 00-983-7456 1.500
Fas Lg Steel, Cadmium Plated
No. 8-32 UNC-3A
00-983-7438 2.000
Fas Lg Drilled heads
00-978-9369 .375 3/4-10 UNC-3A
00-978-9370 .500 No. 4-40 UNC-3A
Fas Lg
00-978-9371 .625
00-978-9372 .750 00-158-0754* 1.500 Fas Lg
00-978-9373 .875 00-984-0234 3.000 00-543-5799 .250
00-978-9374 1.000 * Non Spec Item
00-978-9376 1.500 No. 8-32 UNC-3A
No. 1-8 UNC-3A
No. 10-24 UNC-3A Fas Lg
Fas Lg
00-543-5798 .375
Fas Lg 00-957-2394 2.250 00-969-6503 .500
00-978-9354 .500 00-978-9365 2.750
00-978-9355 .625 No. 10-24 UNC-3A
00-978-9358 1.000 No. 6-40 UNF-3A
Fas Lg
Fas Lg
1/4-20 UNC-3A 00-273-6438 .375
00-983-6650 .500 00-068-0540 .500
Fas Lg 00-543-5794 .625
00-978-9378 .500 No. 10-32 UNF-3A 00-068-0541 1.750
00-978-9379 .625
Fas Lg
00-983-8084 .750 1/4-20 UNC-3A
00-978-9380 .875 00-983-6651 .500
00-978-9385 1.000 00-983-7429 .625 Fas Lg
00-978-9381 1.250 00-983-6652 .750 00-273-5591 .625
00-978-9382 1.500 00-983-6653 .875 00-273-6304 .750
00-983-6654 1.000
5/16-18 UNC-3A 00-983-6655 1.250 No. 10-32 UNF-3A
00-983-6656 2.000
Fas Lg Fas Lg
00-983-6621 1.000 1/4-28 UNF-3A 00-273-7460 .375
00-983-6622 1.250 00-273-7463 .500
Fas Lg
00-983-6623 1.500 00-068-0543 .625
00-983-6625 2.000 00-983-6658 .500 00-207-0895 .750
00-983-6659 .625
3/8-16 UNC-3A 00-983-6660 .750 1/4-28 UNF-3A
00-983-6661 .875
Fas Lg 00-983-6662 1.000 Fas Lg
00-978-9391 .625 00-983-6663 1.250 00-990-6431 .500
00-978-9392 .750 00-685-3013 .750
00-978-9393 .875 5/16-24 UNF-3A 00-957-7446 .875
00-978-9394 1.000 00-226-7605* 1.750
00-978-9395 1.250 * Three holes.
2-16
CLASS 5305
1/2-20 UNF-3A Screw head marked with NAS part number.
Lg
Fas Lg 01-118-9593* 1.197 No. 8-32 UNC-3A
00-054-2265 1.500 * Double lead threads.
00-054-2266 1.750 Fas Lg Grip Lg
SCREW, CLOSE TOLERANCE 00-754-3046 .416 .125
5/8-18 UNF-3A 00-817-5973 .541 .250
PAN HEAD (ROUND) 00-959-2242 .853 .562
Fas Lg
00-059-3652 2.000 SHORT THREADS.
CROSS RECESS DRIVE
Steel No. 10-32 UNF-3A
5/8-11 UNC-3A Fas Lg Grip Lg

00-721-3058 .464 .188
Lg 00-616-6964 .526 .250
00-272-7188 1.500 00-680-6395 .588 .312
00-754-2064 .714 .438
NON SPEC ITEMS 00-660-3149 1.041 .750
Titanium Alloy 00-826-1633 1.526 1.250
Nickel Alloy 400
No. 10-32 UNJF-3A 1/4-28 UNF-3A
No. 8-32 UNC-3A
Fas Lg Grip Lg Fas Lg Grip Lg
Lg 00-505-3039 1.464 1.188 00-720-9112 .581 .250
00-912-3487* .375 00-721-3060 .691 .375
* SPCC HX Quality control TORQUE SET DRIVE 00-802-8860 .816 .500
item
Steel, Cadmium Plated 5/16-24 UNF-3A
Fas Lg Grip Lg
No. 10-32 UNJF-3A
No. 8-32 UNJC-3A 00-827-7071 1.000 .625
Fas Lg Grip Lg
Lg 01-057-9328 .564 .188 HIGH TORQUE DRIVE
01-131-2193 .589
100 DEGREES FLAT COUNTERSUNK HEAD
FLAT COUNTERSUNK HEAD, HEXAGON
INTERNAL DRIVE CROSS RECESS DRIVE
Copper Alloy
Iron Alloy Passivated
1/2-13 UNC-3A
Lg No. 10-32 UNF-3A
01-356-8411 1.250 Iron Alloy, Cadmium Plated Fas Lg Grip Lg
00-347-7828 .526 .250
Nickel Alloy Fas Lg Grip Lg
01-269-6888 .480 .365 No. 10-32 UNJF-3A
3/8-16 UNC-3A
Steel, Cadmium Plated Fas Lg Grip Lg
Lg 00-505-3441 .483 .125
01-169-6770 1.230 REGULAR THREADS. Screw head marked With 00-505-3442 .546 .188
triangle and dot symbol. Dimensions listed in 00-505-3444 .608 .250
Steel, Cadmium Treated inches. 00-505-4056 .670 .312
00-514-5436 .666 .375
1/4-28 UNF-3A No. 10-32 UNF-3A 00-503-5689* .853 .562
* Pan head
Lg Fas Lg Grip Lg
01-118-9593* 1.197 00-811-4067 .781 .375 1/4-28 UNF-3A
* Double lead threads.
1/4-28 UNF-3A Fas Lg Grip Lg
5/16-24 UNF-3A 01-054-8398 1.170 .812
Fas Lg Grip Lg
Lg 00-815-5050* .628 .316 Steel, Cadmium Plated
00-993-1063 .625 00-551-6716 1.407 .938
00-527-4569 1.719 1.250 No. 10-32 UNJF-3A
3/8-24 UNF-3A * 1/4-28 UNJF-3A
Fas Lg Grip Lg
Lg 5/16-24 UNF-3A 00-514-7499 .531 .125
01-220-0193 1.075 00-639-7256 .594 .188
00-811-5032 1.250 Fas Lg Grip Lg 00-580-7224* .594 .312
00-543-4644 .969 .438 00-509-7990 .656 .344
1/4-28 UNF-3A 00-576-2812 1.031 .500 01-131-6733 .675 .312
2-17
CLASS 5305
00-576-1223 .719 .312 00-505-3217 .603 .322 No. 10-32 UNJF-3A
00-639-7249 .844 .438
00-550-9474 .968 .562 No. 10-32 UNF-3A Fas Lg Grip Lg
00-639-7246 1.031 .625 01-193-6859 .716 .375
00-551-6713 1.094 .688 Fas Lg Grip Lg 01-199-1335 .841 .500
01-053-1903 1.363 .850 00-164-8319 .464 .125
* Clutch Type Drive 00-347-8294 .652 .188 Steel, Passivated
National Aerospace Standard. 00-114-1978 .675 .250
00-170-1606 .738 .312 3/8-24 UNJF-3A
1/4-28 UNF-3A 00-311-9327 .799 .375
00-338-3256 .839 .500 Fas Lg Grip Lg
Fas Lg Grip Lg 00-316-8107 .926 .500 01-183-5868 1.174 .633
00-551-8155 .719 .250 00-338-3257 1.051 .625
00-639-7254 .781 .312 00-338-3269 1.176 .750 100 DEGREES OVAL COUNTERSUNK HEAD
00-143-9768 .785 .448 00-338-3227 1.214 .339
00-639-7253 .844 .375
00-527-4424 .906 .438 CROSS RECESS DRIVE
TORQUE SET DRIVE
00-508-9744 1.031 .562
00-558-8149 1.219 .750
00-576-7651 1.406 .938
00-582-9223 1.531 1.062
5/16-24 UNF-3A
Steel, Passivated
Fas Lg Grip Lg
Screw head marked with National Aerospace 1/4-28 UNJF-3A
00-551-6709 1.406 .875
Standard (NAS) part number as indicated.
Dimensions listed in inches. Fas Lg Grip Lg
CRES, Passivated
00-395-3356 .657 .188
Iron Alloy, Passivated
No. 10-32 UNJF-3A
HIGH TORQUE DRIVE
Fas Lg Grip Lg No. 10-32 UNJF-3A
01-015-6646 .594 .188
Fas Lg Grip Lg
1/4-28 UNJF-3A 01-082-2048 .464 .188
00-116-0034 .516 .250
Fas Lg Grip Lg
01-006-2736 .719 .250 Steel, Cadmium Plated
Steel, Aluminum Plated
00-551-4842 1.157 .688
01-135-6490 1.344 .875 No. 10-32 UNJF-3A
1/4-28 UNJF-3A
5/16-24 UNJF-3A Fas Lg Grip Lg
Fas Lg Grip Lg
00-838-7329 .454 .188
Fas Lg Grip Lg 00-821-2838 .714 .438 01-135-2401 .844 .375
00-821-2839 .776 .500 01-133-2195 .969 .500
01-135-1149 .843 .312
00-814-1926 .901 .625 01-130-3273 1.031 .469
01-146-3594 1.344 .812
01-132-6508 1.406 .875
01-132-6509 1.469 .938 Titanium Alloy CRES, Passivated
3/8-24 UNJF-3A Fas Lg Grip Lg 1/4-28 UNF-3A

01-193-2380 .487 .125
Fas Lg Grip Lg 01-168-0877 .487 .125 Fas Lg Grip Lg
01-131-2209 1.641 1.000 01-158-7836 .549 .187 00-354-5143 .719 .469
01-166-1706 .549 .187 00-354-5148 .844 .375
7/16-20 UNJF-3A 01-160-5701 .613 .250 00-354-5151 .969 .500
01-176-7383 .613 .250 00-354-5155 1.031 .562
Fas Lg Grip Lg 01-191-8248 .675 .312 00-354-4919 1.157 .688
01-131-2206 1.844 1.188 01-163-8248 .675 .312
00-917-6279 .713 .888 10-32 UNJF-3A
Steel, Passivated 01-197-2550 .738 .375
01-173-6806 .809 .438 Fas Lg Grip Lg
No. 10-32 UNJF-3A 01-160-6837 .863 .375 00-316-8140 .584 .406
00-478-0296 2.191 1.875
Fas Lg Grip Lg Steel, Passivated
00-324-9249 .656 .406 1/4-28 UNJF-3A
No. 10-32 UNJF-3A
Fas Lg Grip Lg
Titanium Alloy
01-195-7950 .841 .438 Fas Lg Grip Lg
No. 10-32 UNJF-3A 01-197-6607* .903 .500 00-372-8344 .456 .406
* Internal drive, Ribbed
Fas Lg Grip Lg
00-338-3254 .589 .250 NON SPEC ITEMS
2-18
CLASS 5305
SCREW, DRIVE Steel, Cadmium Plated CRES Passivated
ROUND HEAD, DRIVE SCREW No. 4-40 UNC-2A 5/16-24 UNF-2A

Lg Lg
Steel
01-034-3993 .250 00-891-4896 1.750
CROSS RECESS DRIVE SLOT DRIVE
Size 0, No. 51 Drill

Pilot Lg
00-014-1766 .045 Steel, Nickel Plated
Steel
Cadmium Plated 1/4-32 UNEF-2A
No. 10-24 UNC-2A
Lg
Size 00, No. 55 Drill Lg
00-752-9462 .375
Fas Lg 00-436-4415 .813
00-253-5603 .125 WITHOUT INTERNAL DRIVE
FLAT CHAMFER HEAD
SLOT DRIVE
Fas Lg
00-253-5606 .125
00-253-5607 .188

Steel, Passivated
Fas Lg
00-175-3230 .188 1/4-28 UNF-2A
00-253-5612 .250 Steel, Cadmium Plated
Lg
Size 4, No. 37 Drill 1/2-20 UNF-3A 01-166-3641 1.000
Fas Lg Lg KNURLED HEAD

00-253-5614 .188 00-914-8824 5.520
00-253-5615 .250 CROSS RECESS DRIVE
00-253-5616 .312 Steel, Passivated
Size 6 No. 31 Drill General Dynamics Corp part number listed.
Fas Lg No. 10-32 UNF-2A

00-253-5625 .375
Lg P/N
Size 10, No. 20 Drill 00-019-9120 .656 666164-260
00-891-8989* .656 666231-671 CRES Passivated
Fas Lg * Cone point, 120 degree angle
00-253-5618 1/4-20 UNC-2A
100 DEGREES FLAT COUNTERSUNK
Lg
SCREW, EXTERNALLY RELIEVED UNDERCUT HEAD
00-998-2936 2.380
BODY
CROSS RECESS INTERNAL DRIVE
SLOT DRIVE
FILLISTER HEAD, SLOT DRIVE
Steel, Passivated
No. 10-24 UNC-2A

01-248-5731 .500 .310
HEXAGON HEAD
CROSS RECESS DRIVE CRES

Copper Alloy, Nickel Plated
No. 8-32 UNC-2A
No. 8-32 UNC-2A
Lg
Lg
01-087-1145 .670
00-443-5895 .454
00-973-0929 2.125 ROUND HEAD
2-19
CLASS 5305
CROSS RECESS DRIVE Steel Comp No. 4-40 UNC-3A
Furnished with fender washer part number S502 Lg

00-978-9345 .750
1/2-20 UNF-2A
Steel Comp, Passivated
Lg
01-167-3291 .297 No. 6-32 UNC-3A
Steel, Passivated Lg
FILLISTER HEAD
00-959-1082 .485
No. 10-32 UNF-3A
CROSS RECESS DRIVE
Lg 80 DEGREES FLAT COUNTERSUNK HEAD
00-782-8245 .610
INTERNAL CROSS RECESS DRIVE
UNDERCUT UNIVERSAL HEAD
Steel Comp
SLOT DRIVE
No. 10-32 UNF-2A
Screw head drilled with one hole and marked
with 1 or 2 Xs. Fastener length listed in inches. Lg
00-984-7342 .750
No. 6-32 UNC-3A
Steel Corrosion Resisting, Passivated
Lg
00-282-2712 .500 Lg
00-144-0364 .735
No. 8-32 UNC-3A
Plastic Polyamide
Lg
5/16-24 UNF-2A 00-264-2220 .250 HIGH TORQUE DRIVE
00-145-7011 .500
Lg
00-913-6886 1.530 No. 10-24 UNC-3A
SCREW, LAG Lg
00-145-7016 .375
HEXAGON HEAD, GIMLET POINT 00-145-7017* .500
* Slot drive
No.10-32 UNF-3A
Close tolerance screw. Screw head marked with
Lg NAS Standard part number. Dimensions listed in
00-150-9213 .375 inches.
Steel, Zinc Plated 00-150-9212 .500
00-150-9211 .625 SHORT THREAD
1/4 Inch Thread Diameter 00-150-9208 1.000
No. 10-32 UNJF-3A
Lg 1/4-28 UNF-3A
00-402-5748 2.000 Fas Lg
00-177-5622 2.500 Lg 00-902-7831 .472
00-402-5749 3.500 00-150-9517 .750 00-001-6673 .526
00-150-9515 1.000
3/8 Inch Thread Diameter 5/16-24 UNF-3A
INTERNAL SLOT DRIVE
Lg Fas Lg
00-406-9219 1.500 Steel Comp, Passivated 00-866-1729 .875
00-406-5178 2.000
00-406-9224 2.500 No. 8-32 UNC-2A REGULAR THREAD
00-145-1064* 3.000
00-177-5428 4.000 Lg No. 10-32 UNJF-3A
* CRES 00-939-9257* 2.000
* Round hole in head. Lg
1/2 Inch Thread Diameter 00-558-2585 .906
Steel Oxide 00-527-4426 .968
Lg
00-551-8151 1.281
00-412-9787 3.000 Thd Dia O/A Lg
00-412-9789 4.000 01-204-4371 3mm 4.8mm CROSS RECESS DRIVE
SCREW, MACHINE FLAT CHAMFER
BUTTON HEAD INTERNAL HEXAGON DRIVE
SLOT DRIVE Steel, Cadmium and Chromate
2-20
CLASS 5305
CRES
Lg Lg
Head marked with a dash (-) on No. 6 and larger 00-989-5002 .375 00-824-2021 .789
screws. Length listed in inches. 00-719-5400 .437 00-824-2028 .852
00-719-5401 .468 00-824-2020 .977
No. 4-40 UNC-2A 00-702-0609 .562 00-066-7323 1.352
00-964-2845 .625
Lg 00-958-3409 .687 1/4-28 UNF-3A
00-780-8454 .625 00-719-5402 .750
00-719-5403 .789 Lg
00-719-5404 .852 00-207-2793 .750
No. 6-32 UNC-2A
00-719-5405 .915 00-054-9242 .906
Lg 00-705-2271 .977
00-088-9665 .625 00-705-1640 1.039 3/8-24 UNF-3A
00-777-5984 1.000 00-705-2468 1.102
00-705-2388 1.165 Lg
00-705-2387 1.250 00-689-8871 1.187
No. 8-32 UNC-2A
00-705-2189 1.375
Lg 00-705-2332 1.500 100 DEGREES FLAT COUNTERSUNK HEAD
00-088-9671 .750 00-705-2030 1.562
00-705-2472 1.602 CROSS RECESS DRIVE
00-705-2801 1.665
No. 10-32 UNF-2A
00-705-2804 1.789
Lg 00-705-2833 1.915
00-781-5664 .438
00-043-0267 .735 1/4-28 UNF-3A
00-781-5663 1.000 Lg
1/4-20 UNC-2A 00-043-2684 .562
00-043-2681 .625 Steel, Cadmium Plated
Lg 00-043-2682 .750
00-724-7837 .735 00-045-3182 .789 Close tolerance aircraft screw.
00-045-3181 .852
Aluminum Alloy, Anodized 00-045-3180 .915 No. 8-32 UNC-3A
00-964-2844 1.125
00-058-4011 1.187 Lg
No. 10-32 UNF-3A
00-058-4006 1.750 00-297-8201 .468
Lg 00-297-8202 .593
00-225-4588 .539 5/16-24 UNF-3A
00-225-4590 .656 No. 10-32 UNF-3A
Lg
00-225-4592 .781 Lg
00-225-4593 .844 00-269-4204 1.312
00-225-4594 .906 00-206-3702 .468
00-225-4595 .969 3/8-24 UNF-3A 00-839-3437 .531
00-225-4597 1.094 00-206-3701 .593
Lg 00-206-1688 .656
1/4-28 UNF-3A 00-932-5694 .875 00-639-0047 .718
00-206-5401 .781
Lg CRES 00-206-3647 .843
00-071-2499 .625 00-207-1788 .968
Head marked with a dash (-). 00-206-3645 1.093
Steel, Cadmium Plated 00-207-1786 1.156
4-40 UNC-2A 00-515-7460 1.531
Head marked with an X. Length listed in
inches. Lg 1/4-28 UNF-3A
00-781-9478 .312
Lg
No. 8-32 UNC-3A
No. 8-32 UNC-3A 00-637-6949 .531
Lg 00-576-6617 .906
00-057-0489 .375 Lg
00-889-2994 .437 00-902-2124 .500 5/16-24 UNF-3A
00-057-0490 .500 00-902-2125 .562
Lg
00-057-0491 .562 00-904-0902 .593
00-551-0046 .718
00-057-0492 .625
00-725-0119 .750 No. 10-32 UNF-3A
00-057-0493 .789 Iron Alloy, 660
00-057-0495 .915 Lg
00-267-8971 .977 00-824-2026 .375 High temperature, nonmagnetic. Length listed in
00-057-0487 1.039 00-824-2025 .437 inches.
00-824-2024 .500
No. 10-32 UNF-3A 00-052-9802 .562 No. 10-32 UNF-3A
00-824-2023 .625
Lg 00-066-7322 .687 Lg
00-719-5406 .312 00-824-2022 .750 00-816-0033 .588
2-21
CLASS 5305
Lg Lg
00-616-1532 .651 00-891-1779 1.906
00-616-2424 .713 00-839-7090 2.094
01-113-9744* .783 00-839-0762 2.469
01-042-4410 .909
* Nickel Alloy 1/4-28 UNF-3A
CROSS RECESS DRIVE Lg Lg

00-618-1407 .416 00-891-1783 .656
00-824-6232 .464 00-891-8883 .719
00-891-1784 .727
CROSS RECESS DRIVE 00-903-7720 1.063
CRES
Steel, Cadmium Plated No. 8-32 UNC-3A

Lg
No. 10-32 UNJF-3A
00-936-3007 .469
Lg
Aluminum Alloy, Anodized No. 10-32 UNF-3A
00-145-0904 .500
00-177-5688 .937 Lg
No. 10-32 UNF-3A
00-943-0898 .626
1/4-28 UNJF-3A Lg 00-946-7877 .656
Lg 00-905-2891 .415
00-186-9220 1.250 FULL THREAD
Iron Alloy, Passivated
Steel, Corrosion Resisting Steel, Cadmium Plated
Lg
00-842-7492 .415 Lg
No. 10-24 UNC-2A 00-925-9679 .540 00-842-0241 .365
Lg 00-813-2796 .380
Steel, Cadmium Plated 00-995-2125 .440
01-355-5505* .750
* Plastic locking feature 00-841-2942 .475
Head marked with a dash (-). 00-866-0937 .500
00-813-2791 .562
TORQUE SET DRIVE
No. 8-32 UNC-3A 00-841-2948 .750
Lg SHORT THREAD
00-944-8271 .422
00-921-0919 .469 Lg
00-921-0918 .531 00-655-7541 .338
00-925-9675 .594 00-687-6333 .401
00-891-1775 .688 00-619-6031 .401
Steel, Cadmium Plated 00-932-1921 .719 00-619-4344 .464
00-840-5895 .853 00-616-3801 .526
SHORT THREAD. 00-997-7045 .938 00-625-7672 .588
00-616-6086 .651
No. 10-32 UNF-3A No. 10-32 UNF-3A 00-924-9508 .714
00-616-8217 .714
Lg Lg 00-680-6393 .776
00-902-7890 .353 00-849-4642 .281 00-680-5430 .964
00-935-3025 .416 00-925-7856 .344 00-993-5826 1.026
00-702-1595 .479 00-912-7307 .406 00-626-3495 1.526
00-058-2575 .541 00-944-5929 .469
00-820-2144* .588 00-781-9057 .531 Steel Comp, Cadmium and Chromate
00-702-1596 .603 00-925-7857 .594
* Rockwell P/N 7S36-3A4 00-925-9674 .656 No. 8-32 UNC-2A
00-925-9682 .719
HEXAGON HEAD 00-082-6780 .781 Lg
00-948-4152 .853 00-889-3002 .297
INTERNAL CROSS RECESS DRIVE 00-912-7308 .906
00-925-7862 .969 No. 8-32 UNC-3A
Steel Comp, Cadmium and Chromate 00-925-7863 1.031
Treated 00-925-4836 1.094 Lg
00-914-9000 1.156 00-925-9675 .588
Lg 00-891-1778 1.344
01-089-1520 .500 00-945-0539 1.414 No. 10-32 UNF-2A
00-982-2618 1.469
PAN HEAD 00-948-4151 1.594 Lg
00-925-7864 1.790 00-995-3444 .875
HI-TORQUE DRIVE 00-325-2461 1.853
2-22
CLASS 5305
No. 10-32 UNF-2A 1/4-28 UNF-3A 1/4-20 UNC-2A
Lg Lg Fas Lg
00-925-7858 1.228 00-282-0135 .500 00-543-5923 .500
00-182-1368 1.250 00-068-1814 1.000
No. 10-32 UNJF-3A 00-068-1817 2.000
INTERNAL SLOT DRIVE
Lg CRES
00-995-2124 1.085 Steel
One hole drilled in head.
PAN HEAD No. 10-32 UNF-3A
No. 2-56 UNC-2A
TORQUE SET DRIVE Lg
00-111-7491 .562 Fas Lg
00-008-3668* .875 00-922-8777 .188
* Corrosion Resisting Steel 00-922-8778 .250
00-941-6403 .625
ROUND HEAD
No. 4-40 UNC-2A
CROSS RECESS DRIVE
Fas Lg
00-945-0505 .187
00-925-4774* .312
No. 4-40 UNJC-3A 00-941-9437 .375
00-945-0506 .437
Lg 00-947-2169 .500
00-007-9881 .437 00-925-4780 .625
* Cross Recess Type
ROUND EXTENDED WASHER HEAD Steel, Cadmium Plated
No. 6-32 UNC-2A
CROSS RECESS DRIVE No. 10-32 UNF-3A
Fas Lg
Lg 00-940-9487 .187
00-282-4203 1.031 00-940-9488 .250
00-940-9489 .312
1/4-28 UNF-3A 00-922-6286 .375
00-940-9491 .500
Lg 00-925-4777 .625
00-282-9504 .969 00-948-4038 .750
00-942-2167 .875
Aluminum Alloy, Anodized FILLISTER HEAD 00-942-2168 1.000
No. 10-32 UNF-3A SLOT DRIVE No. 8-32 UNC-2A

Lg Fas Lg
00-823-5794 .375 00-939-9221 .250
00-180-1475 .437 00-939-9222 .312
00-576-7809 .688 00-939-9230 .375
00-942-8431 .500
1/4-28 UNF-3A 00-939-9232 .625
00-939-9208 .750
Lg Copper Alloy 00-943-5918 1.000
00-688-0254 1.500 00-939-9258 2.250
One drilled hole in head.
Steel, Cadmium or Zinc Plated No. 10-24 UNC-2A
No. 6-32 UNC-2A
Fas Lg 00-939-9179 .375
Lg 00-839-4513 .375 00-939-9188 .500
00-281-8875 .437 00-880-1425 .500 00-939-9189 .625
00-281-8527 .500 00-939-9191 .875
No. 10-24 UNC-2A 00-939-9209 1.250
No. 10-32 UNF-3A
Fas Lg No. 10-32 UNF-2A
Lg 00-068-9185 .500
00-180-3322 .375 00-068-5823 1.000 Fas Lg
00-180-0009 .438 00-068-5825 1.500 00-912-4839 .437
00-180-0011 .562 00-068-9156 2.000 00-912-4838 .500
00-180-0013 .688 00-912-4837 .625
00-180-0014* .734 No. 10-32 UNF-2A 00-912-4833 .750
00-282-8470 1.125 00-912-4819 1.000
00-920-0850 1.250 Fas Lg
* Slot drive 00-071-2214 1.000 1/4-20 UNC-2A
2-23
CLASS 5305
00-939-9132 .500 00-660-2467 .625 00-052-7449 1.000
00-939-9146 .625 00-808-9977 1.000 00-052-7451 1.500
00-939-9148 .875
00-939-9151 1.500 5/16-18 UNC-2A No. 4-48 UNF-2A
CROSS RECESS Fas Lg Fas Lg

00-619-2322 .750 00-057-9586 .250
82 DEGREES FLAT COUNTERSUNK HEAD No. 10-32 UNF-2A
CROSS RECESS DRIVE Fas Lg

00-964-6195 .375
00-964-6196 .500
00-053-1087 1.000
Nickel-Copper Alloy
One drilled hole in head.
Aluminum Alloy, Anodized 5/16-18 UNC 3A
No. 4-40 UNC-2A
Fas Lg
00-811-6951 .750
00-811-9853 .187 Fas Lg
00-543-2024 .250 00-879-0545 .562 3/8-16 UNC-3A
00-558-4887 .312 00-068-9167 1.000
00-531-0298 .375 Fas Lg
00-543-5058 .437 Copper Alloy 00-811-6953 1.000
00-614-0260 .500
00-543-2732 .625 CRES
No. 5-40 UNC-2A
00-614-0261 .750
Fas Lg Fastener length listed in inches.
No. 6-32 UNC-2A 00-151-2341 .375
Fas Lg No. 2-56 UNC-2A
No. 6-32 UNC-2A
00-543-2023 .187 Fas Lg
00-514-7506* .250 Fas Lg 00-764-2966 .188
00-582-5807* .375 00-954-5636 1.000 00-727-8833 .250
00-579-2139* .500 00-764-2964 .312
00-582-5808 .625 No. 8-32 UNC-2A 00-763-3356 .375
00-579-2136 .750 00-725-4191 .500
* Slot Drive Fas Lg
00-958-1002 .375 No. 4-40 UNC-2A
No. 8-32 UNC-2A 00-954-5629 .500
00-954-5637 .750 Fas Lg
Fas Lg
00-777-6039 .188
00-622-9475 .250 No. 10-24 UNC-2A 00-770-2533 .250
00-559-8145 .312 00-763-7822 .312
00-614-3423* .375 Fas Lg 00-770-2579 .375
00-614-0270 .437 00-052-5915 1.000 00-770-2580 .438
00-543-2752* .500 00-768-0336 .500
00-660-2625 .750 1/4-20 UNC-2A
00-622-9479 1.250 No. 6-32 UNC-2A
* Slot Drive Fas Lg
00-052-5923 .500 Fas Lg
No. 10-24 UNC-2A 00-206-3689 .625 00-763-6961 .250
00-206-3693 .750 00-763-6962 .312
Fas Lg
00-052-5925 1.000 00-763-6963 .375
00-543-4662* .375 00-052-5926 1.250 00-727-8832 .437
00-614-0245* .625 00-206-3694 1.500 00-719-5064 .500
00-579-4576 .750 00-052-5935 2.000 00-765-4352 .625
00-810-5543 1.000 00-052-5937 2.500 00-765-4350 .875
* Slot Drive 00-765-4344 1.500
5/16-18 UNC-2A
No. 10-32 UNF-2A No. 8-32 UNC-2A
Fas Lg
Fas Lg Fas Lg
00-052-5941 .625
00-969-6487 .250 00-052-7482 .750 00-765-4244 .250
00-720-8429 .312 00-052-7484 1.000 00-765-4257 .375
00-614-0246 .500 00-764-0066 .437
00-614-0247 .625 3/8-16 UNC-2A 00-764-0068 .500
00-616-4831 .750 00-764-0070 .625
Fas Lg 00-764-0071 .750
1/4-20 UNC-2A 00-052-7431 .750 00-727-8834 .875
2-24
CLASS 5305
No. 10-24 UNC-2A No. 4-40 UNC-2A
Fas Lg
Fas Lg 00-958-6230 .437 Fas Lg
00-701-5073 .437 00-081-6668 .250
00-701-5074 .500 No. 6-32 UNC-2A 00-957-2383 .312
00-701-5075 .625 00-957-7815 .375
00-701-5078 .750 Fas Lg 00-808-7834 .500
00-701-5079 .875 00-957-6265 .250 00-045-8338 .625
00-701-5118 1.000 00-059-4550 .312
00-958-5453 .375 No. 6-32 UNC-2A
1/4-20 UNC-2A 00-059-4553 .500
00-958-5460 1.000 Fas Lg
Fas Lg 00-051-6521 .312
00-701-5228 .500 No. 8-32 UNC-2A 00-957-7817 .375
00-719-5058 .625 00-957-7818 .437
00-719-5021 .750 Fas Lg 00-837-3343 .500
00-719-5017 .875 00-958-5473 .375 00-808-7832 .625
00-719-5007 1.000 00-059-4568 .500 00-957-7820 .875
00-719-5003 1.250 00-958-5477 .625 00-051-8308 2.000
00-719-5001 1.500 00-958-5481 1.000
00-059-4573 1.250 No. 8-32 UNC-2A
5/16-18 UNC-2A
Fas Lg 00-051-2352 .312
00-763-7832 .750 Fas Lg 00-957-7814 .375
00-763-7830 1.000 00-957-6272 .375 00-857-6822 .437
00-954-3487 .500 00-063-3503 .500
3/8-16 UNC-2A 00-958-5471 .750 00-958-6373 .625
00-957-6269 1.000 00-965-5882 .750
Fas Lg 00-088-8996 .875
00-082-6734 .750 No. 10-32 UNF-2A
00-082-6739 1.000 No. 10-32 UNF-2A
00-082-6738 1.250 Fas Lg
00-984-7343 1.000 Fas Lg
No. 0-80 UNF-2A 00-959-2690 2.000 00-900-3249 .250
00-957-7810 .437
Fas Lg 1/4-20 UNC-2A 00-957-7811 .500
00-774-9700 .188 00-957-7086 .625
Fas Lg 00-063-3507 .750
No. 10-32 UNF-2A 00-954-4295 .500 00-965-5879 .875
00-958-5245 .625 00-957-7813 1.125
Fas Lg 00-958-5246 .750
00-071-1322 .500 00-958-5247 1.000 NON SPEC ITEM
00-071-1323 .625 00-958-5248 1.500
00-071-1324 .750 No. 10-32 UNF-3A
00-071-1325 .875 1/4-28 UNF-2A
00-071-1327 1.250 Lg
Fas Lg 00-508-7669 .562
1/4-28 UNF-2A 00-957-2639 .625
No. 10-32 UNJF-3A
00-719-5093 .750 Lg
Fas Lg 00-182-7288 .437
3/8-24 UNF-2A 00-959-2723 1.000 00-151-7974 1.062
00-959-2724 1.250
Fas Lg 00-958-5260 1.500 1/4-28 UNF-3A
00-058-5051 .625
3/8-24 UNF-2A Lg
NON SPEC ITEMS 00-207-3741 1.061
Fas Lg
1/2-13 UNC-2A 00-959-4157 .750 1/4-28 UNJF-3A
00-272-5368 1.125 100 DEGREES FLAT COUNTERSUNK HEAD Lg

00-168-2984 .687
Steel, Cadmium Plated CROSS RECESS DRIVE 00-482-8500 1.125
Fastener length listed in inches. 5/16-24 UNF-3A
No. 2-56 UNC-2A Lg

00-637-5654 1.561
Fas Lg
00-959-2345 .250 5/16-24 UNJF-3A
No. 4-40 UNC-2A
2-25
CLASS 5305
No. 0-80 UNF-2A Steel, Nickel Plated
Lg
00-182-7307 .937 Lg No. 6-40 UNF-2A
00-942-2195 .125
CRES Lg
100 DEGREES FLAT COUNTERSUNK HEAD 00-208-6406 1.750
Screw head sizes No. 6 and larger are marked
with one dash (-). Fastener length listed in SLOT DRIVE Steel, Zinc with Chromate Finish
inches.
No. 4-40 UNC-3A
No. 4-40 UNC-2A
Lg
Lg 00-638-4017 .750
00-763-6009 .187
00-993-9189 .250 Plastic Polyamide FLAT CHAMFER HEAD
00-225-6400 .312
00-056-9961 .375 1/4-20 UNC-2A SLOT DRIVE
00-066-7325 .437
Lg
No. 6-32 UNC-2A 00-543-5733 .750
01-133-4457 .875
Lg 01-004-4983 1.125
00-066-7326 .250
HIGH TORQUE DRIVE
No. 8-32 UNC-2A Steel, Cadmium Plated
Lg
No. 10-32 UNF-3A
00-902-2136 .250
00-056-9962 .312 Lg
00-889-2991 .375
00-282-4919 .750
00-068-5287 .437
Titanium Alloy
00-079-5835 .500
5/16-24 UNF-3A
00-088-9666 .625
No. 8-32 UNC-3A
Lg
No. 10-32 UNF-2A Lg 00-722-6520 .281
Lg 00-141-7320 1.096
Steel, Nickel Plated
00-781-5662 .312
00-088-9667 .375 TORQUE SET DRIVE
00-051-0227 .500 No. 4-40 UNC-3A
00-959-4158 .625 Lg
00-717-5592 .875
00-207-7352 .312
00-781-5673 2.250
00-638-6053 .500
1/4-20 UNC-2A
Steel, Cadmium Plated No. 6-40 UNF-2A
Lg
Lg
00-637-5580 .625 No. 10-32 UNF-3A
00-208-6433 .437
Lg
82 DEGREES FLAT COUNTERSUNK HEAD FLAT CHAMFER HEAD
00-460-3042 .484
SLOT DRIVE CROSS RECESS DRIVE
No. 10-32 UNJF-3A
Lg
01-082-7052 .609
Steel, Passivated
Nickel-Copper Alloy No. 10-32 UNJF-3A
No. 10-24 UNC-2A Lg
00-508-7710 .656 No. 6-40 UNF-2A
Lg 00-413-4000 .750
00-271-4958 .500 Lg
FLAT CHAMFER HEAD 00-208-6403 .688
1/4-20 UNC-2A
CROSS RECESS DRIVE SLOT DRIVE
Lg
00-271-8253 .750
00-206-6931 .921
00-515-7205 1.000
Plastic
2-26
CLASS 5305
Lg Fas Lg
No. 4-40 UNC-3A 00-208-6432 .312 00-207-7467 1.500
00-298-2472 .375 00-954-8985 2.000
Lg 00-639-6399 .500
00-638-7409 .938 No. 8-32 UNC-2A
A39 FLAT COUNTERSUNK
HEXAGON HEAD Fas Lg
1/8-32 UNC2A 00-059-8263 .250
CROSS RECESS DRIVE 00-637-1124 .375
Lg 00-637-1103 .438
01-424-3571 .312 00-637-1123 .500
00-954-5641 .625
1/4-20 UNC2A 00-206-1285 .750
00-206-3713 1.000
Lg 00-206-3715 1.250
01-426-1285 .500 00-954-8987 1.500
01-424-3572 .750
Steel, Cadmium Plated No. 10-24 UNC-2A
1/8-32 UNC2A
No. 10-32 UNF-3A Fas Lg
00-954-8991 .375
Lg 00-059-8280 .500
01-407-5431 .500
00-812-8644 .531 00-954-5643 .625
82 DEGREES OVAL COUNTERSUNK HEAD 00-954-8994 .750
CRES 00-954-8996 1.000
No. 10-32 UNF-2A 00-954-8998 1.500
00-954-9000 2.000
Lg
00-271-6191 .375 No. 10-32 UNF-2A
Steel, Nickel Plated Fas Lg

00-206-2508 .375
No. 6-40 UNF-2A 00-206-2510 .500
00-954-8153 1.250
Lg CRES 00-954-8154 1.500
00-208-6430 .250 00-954-8155 2.000
1/4-20 UNC-2A
No. 6-40 UNF-3A 1/4-20 UNC-2A
Lg
Lg 00-082-6967 .750 Fas Lg
00-659-8291 .297 00-637-1119 .500
PAN HEAD (ROUND) 00-206-2218 1.250
Steel, Zinc with Chromate Finish 00-954-9525 1.500
00-954-9529 2.500
No. 4-40 UNC-3A
Lg 5/16-18 UNC-2A
00-638-2281 .250 Fas Lg
00-638-3826 .500
00-954-8981 1.000
00-954-9537 1.500
No. 6-40 UNF-3A 00-954-9539 2.000
Copper Alloy
Lg
No. 4-40 UNC-2A 3/8-16 UNC-2A
00-638-2303 .188
Fas Lg Fas Lg
SLOT DRIVE 00-954-9548 1.500
00-207-7468 .500
No. 6-32 UNC-2A CRES
Fas Lg No. 2-56 UNC-2A

00-059-8247 .188
00-059-8248 .250 Fas Lg
00-059-8249 .312 00-054-5635 .125
Steel, Nickel Plated 00-206-3716 .375 00-054-5636 .188
00-206-1288 .500 00-054-5637 .250
00-638-0502 .625 00-054-5638 .312
No. 4-40 UNC-2A
00-637-1125 .750 00-054-5639 .375
Lg 00-059-8255 .875 00-054-5640 .438
00-059-8256 1.000 00-054-5641 .500
00-208-6405 .250
00-184-1656 1.125 00-054-5642 .625
00-206-2220 1.250 00-054-5643 .750
No. 6-40 UNF-2A
2-27
CLASS 5305
00-054-5645 .875 01-406-7435 .360 00-762-7482 .188
00-889-3118 .250
No. 4-40 UNC-2A 3/16-24 UNC2A 00-988-1167 .312
00-989-0682 .375
Fas Lg Fas Lg 00-954-3938 .500
00-054-5646 .188 01-424-1352 .300 00-958-6381 .625
00-054-5647 .250 01-398-9599 .375
00-054-5648 .312 01-406-7433 .500 No. 4-40 UNC-2A
00-054-5649 .375 01-423-9274 .585
00-054-5650 .438 01-437-7085 .750 Fas Lg
00-054-5651 .500 01-435-0934 1.000 00-993-0191 .188
00-054-5652 .625 00-889-3116 .250
00-054-5653 .750 1/4-20 UNC-2A 00-993-0190 .312
00-054-5654 .875 00-889-2997 .375
00-054-5655 1.000 Fas Lg 00-889-2998 .438
00-054-5656 1.250 01-435-1743 .312 00-889-2999 .500
00-054-5657 1.500 00-071-1315 .500 00-983-6730* .625
01-406-7434 .500 00-984-4976 .750
No. 6-32 UNC-2A 00-071-1316 .625 00-984-4977 .875
00-082-6721 .750 00-984-4978 1.000
Fas Lg 01-435-1745 .750 00-984-4979 1.250
00-054-6649 .187 00-071-1318 1.000 * Copper Alloy
00-054-6650 .250 00-071-2087 1.250
00-054-6651 .312 00-071-2093 2.000 No. 6-32 UNC-2A
00-054-6652 .375
00-054-6653 .438 3/8-16 UNC2A Fas Lg
00-054-6654 .500 00-984-4982 .188
00-054-6655 .625 Fas Lg 00-984-4983 .250
00-448-6456* .625 01-424-1353 1.000 00-984-4984 .312
00-054-6656 .750 01-435-0936 1.188 00-984-4988 .375
00-054-6657 .875 00-984-4989 .438
00-054-6658 1.000 No. 10-32 UNF-2A 00-889-3000 .500
00-054-6659 1.250 00-889-3001 .625
00-054-6660 1.500 Fas Lg 00-984-4992 .750
00-054-6661 1.750 00-059-3655 .250 00-984-4993 .875
00-054-6662 2.000 00-059-3656 .312 00-984-6221 1.000
* Oxide surface treatment 00-059-3657 .375 00-984-6222 1.250
00-059-3658 .438 00-984-6223 1.500
No. 8-32 UNC-2A 00-059-3659 .500 00-984-6224 1.750
00-059-3660 .625 00-491-9441 1.875
Fas Lg 00-059-3661 .750 00-984-6225 2.000
00-054-6666 .250 00-059-3662 .875
00-054-6667 .312 00-059-3663 1.000 No. 6-40 UNF-2A
00-054-6668 .375 00-059-3664 1.250
00-054-6669 .438 00-059-3665 1.500 Fas Lg
00-054-6670 .500 00-059-3667 2.000 00-958-4351 .250
00-054-6671 .625 01-006-8963* 3.500
00-054-6672 .750 * Non Spec Item No. 8-32 UNC-2A
00-054-6673 .875
00-054-6674 1.000 1/8-40 UNF2A Fas Lg
00-054-6675 1.250 00-984-6189 .250
00-054-6676 1.500 Fas Lg 00-889-3002 .312
00-054-6677 1.750 01-435-1744 .500 00-984-6191 .375
00-054-6680 2.000 00-984-6192 .438
1/4-28 UNF-2A 00-984-6193 .500
No. 10-24 UNC-2A 00-954-0942 .562
Fas Lg 00-984-6194 .625
Fas Lg 00-984-6195 .750
00-059-3673 .375
00-050-9227 .375 00-059-3676 .625 00-984-6196 .875
00-050-9229 .500 00-984-6197 1.000
00-050-9230 .625 9/16-24 UNF-2A 00-455-6840 1.125
00-050-9231 .750 00-984-6198 1.250
00-050-9233 1.000 Fas Lg 00-984-6199 1.500
00-050-9234 1.250 00-500-9394* .437 00-984-6200 1.750
00-050-9235 1.500 * Non Spec Item, features 3/8 inch 00-984-6201 2.000
00-050-9238 2.250 diameter by .562 inch length concentric 00-984-6203 2.500
hole on thread end 00-984-6205 3.000
9/64-32 UNC2A
Steel, Cadmium Plated No. 8-36 UNF-2A
Fas Lg
01-419-4344 .360 No. 2-56 UNC-2A Fas Lg
00-989-4864 .500
5/32-32 UNC2A
2-28
CLASS 5305
No. 10-24 UNC-2A
Fas Lg Fas Lg
Fas Lg 00-958-0610 .625 00-010-1145* 1.000
00-984-6207 .312 * slot drive
00-984-6208 .375 No. 10-32 UNF-2A
00-984-6210 .500 CRES
00-984-6211 .625 Fas Lg
00-984-6212 .750 00-995-6311 2.000 No. 5-40 UNC-2A
00-984-6213 .875
00-984-6214 1.000 PAN HEAD (FLAT) Fas Lg
00-984-6216 1.500 00-455-2706* .500
00-984-6218 2.000 SLOT DRIVE * Non Spec Item.
No. 10-32 UNF-2A WATERTIGHT HEAD

Fas Lg
INTERNAL CROSS RECESS DRIVE
00-993-1849 .250
00-088-9044 .312
00-990-6444 .375 Steel Comp, Passivated
00-989-6265 .438
00-989-7434 .500 Plastic, Polyexamethylene Amide No. 8-32 UNC-2A
00-989-7435 .625
00-993-1848 .750
00-995-3444 .875 00-245-4621 .297
00-993-1851 1.000 Fas Lg
00-995-3442 1.250 00-833-8624 .250 SCREW, SELF LOCKING
00-995-3441 1.500
00-995-3440 1.750 No. 6-32 UNC-2A BUTTON HEAD
00-958-0585 2.250
00-958-0586 2.500 Fas Lg
00-582-6151 .500 HEX DRIVE
00-958-0671 2.750
00-958-0672 3.000
Plastic, Polyhexamethylene Adipamide
1/4-20 UNC-2A
No. 10-24 UNC-2A
Fas Lg
00-988-1723 .500 Fas Lg
00-988-1724 .625 00-452-2160 .250
00-988-1727 1.000
00-988-1170 1.250 Steel, Cadmium Plated Steel, Zinc Coated
00-988-1171 1.500
00-988-1728 2.000 No. 2-56 UNC-2A Lg WAF
00-988-1730 2.500 01-077-7099 .625 .156
Fas Lg
1/4-28 UNF-2A 00-412-5685 .156 FILLISTER HEAD
Fas Lg 1/4-20 UNC-3A HEX DRIVE
00-952-0760 .375
00-993-2463 .500 Fas Lg
00-993-2738 .625 00-216-8592 .500
00-993-2461 .750
Steel, Oxide Coated
1/4-28 UNF-3A
No. 6-40 UNF-3A
Fas Lg
00-619-2020* .375 Fas Lg
With Nylon locking element.
* Non Spec Item. 00-109-7436 .750
5/16-18 UNC-2A ROUND HEAD CRES
Fas Lg CROSS RECESS DRIVE No. 8-32 UNC-3A

00-984-5674 .500
Lg. WAF
00-984-5676 .750
00-984-5678 1.000 01-071-1297 .500 .141
00-984-5686 3.000
1/4-20 UNC-3A
3/8-16 UNC-2A
Lg WAF
Fas Lg 01-071-1299 .750 .188
NON SPEC ITEMS
00-984-5691 1.000
00-984-5693 1.500 Zinc O/A
No. 12-24 UNC-2A
3/8-24 UNF-2A Fas Lg 1/4-20 UNC-3A
00-290-3046 .500
2-29
CLASS 5305
No. 6-32 UNC-3A 1/4-20 UNC-3A
Lg WAF
01-071-1306 .500 .188 Lg Lg WAF
00-964-0872* .375 00-067-3461 .750
5/16-18 UNC-3A * With strip thread locking
device 5/16-18 UNC-3A
Lg WAF
01-060-7101 .750 .250 FLAT CHAMFER HEAD Lg WAF
01-159-1287* .625
82 DEGREES FLAT COUNTERSUNK HEAD HEX DRIVE * Non Spec Item.
HEX DRIVE Steel
1/4-20 UNC-3A
Lg WAF
00-034-1122 .250 .188
With Nylon locking element. 00-034-1127 1.250 .188
With Nylon locking element. Steel, Cadmium Plated 5/16-18 UNC-3A

Lg WAF
Steel, Uncoated No. 10-24 UNC-3A
00-034-1130 .625 .188
Lg WAF
3/8-24 UNF-3A 3/8-16 UNC-3A
00-584-8012 .500 .156
Lg WAF 00-969-5466 1.500 .156 Lg WAF
00-059-7576 1.000 .218 00-145-0776 3.531 .156
00-034-1150 2.250 .312
00-034-1152 2.750 .312
Steel, Zinc Plated 1/4-20 UNC-3A
Lg WAF Steel, Zinc Plated
No. 10-24 UNC-3A
00-182-9379 .766 .188
No. 8-32 UNC-3A
Lg WAF
5/16-18 UNC-3A
00-034-1239 .500 .125 Lg WAF
Lg WAF 00-226-2827 .391 .141
5/16-18 UNC-3A 00-182-7485 .875 .250
5/16-18 UNC-3A
Lg WAF
5/16-24 UNF-3A
00-034-1234 .750 .188 Lg WAF
Lg WAF 00-064-8384 1.250 .312
Steel, Cadmium Plated 00-405-5304 .719 .250
3/8-16 UNC-3A
1/4-20 UNC-3A 3/8-16 UNC-3A
Lg WAF
Lg WAF Lg WAF 00-034-1215 .750 .312
00-021-2058 .625 .156 00-723-9415 1.000 .312 01-028-1519 1.000 .875
00-829-0413 1.250 .312 00-064-8388 1.500 .312
CRES
CRES 1/2-13 UNC-3A
1/4-20 UNC-3A
1/4-20 UNC-3A Lg WAF
Lg WAF 00-064-8389 1.000 .375
00-842-3410 .750 .156 Lg WAF 00-064-8390 1.250 .375
00-440-3513 .500 .188 01-152-4026 1.250 .563
100 DEGREES FLAT COUNTERSUNK HEAD 00-064-8391 1.500 .375
3/8-16 UNC-3A
CROSS RECESS DRIVE Steel, Cadmium Plated
Lg WAF
00-913-8869 2.750 .312 Soft metal locking element.
Steel, Oxide No. 4-40 UNC-3A
5/16-18 UNC-3A Lg
00-917-4729 .250
Lg WAF
With Soft Metal locking feature.
00-926-5679 .500 .218 No. 10-32 UNF 3A
CRES 3/4-10 UNJC-3A Lg
Lg 00-870-0048 .375
Lg WAF $Ww
00-115-9416 .937 01-133-7190 1.500 .625 No. 10-24 UNC-3A
Steel, Cadmium Plated Steel, Passivated
2-30
CLASS 5305
SCREW, SHOULDER No. 10-24 UNC-3A
Lg WAF
00-924-9507 .375 .156 Shldr
FILLISTER HEAD Fas Lg Thd Lg Dia
00-948-9811 .645 .156
00-939-0661 .740 .365 .247
SLOT DRIVE 00-914-3817 1.120 .365 .247
1/4-20 UNC-3A
Lg WAF 1/4-20 UNC-3A
00-810-7637 .625 .187
00-985-0650 .875 .187 Shldr
Fas Lg Thd Lg Dia
5/16-18 UNC-3A 00-914-3818 .928 .428 .309
Steel, Cadmium Plated.
Lg WAF 3/8-16 UNC-3A
00-723-9412 .750 .250 No. 6-32 UNC-2A
Shldr
00-811-6669 1.000 .218 Shldr Fas Lg Thd Lg Dia
Fas Lg Thd Lg Dia 00-914-4171 1.360 .610 .497
00-225-2784 .400 .213 .153
5/16-24 UNF-3A
5/8-11 UNC-3A
Lg No. 10-32 UNF-2A
Shldr
00-889-3154 1.031 Shldr Fas Lg Thd Lg Dia
Fas Thd Lg Lg 00-005-0429 1.860 .860 .747
00-234-0142 .687 .253 .218
HEXAGON DRIVE
3/4-10 UNC-3A
FLAT CHAMFER HEAD
Shldr
SLOT DRIVE Fas Lg Thd Lg Dia
00-577-5434 2.360 .860 .747
SCREW, TAPPING
Nickel
5/16-18 UNC-2A Copper Alloy CROSS RECESS DRIVE
Lg
No. 10-24 UNC-2A
00-786-6501 .628
Shldr
PAN HEAD Fas Lg Thd Lg Lg
Lg Lg Dia
CROSS RECESS DRIVE 00-514-7388 .290 .250 .250 Steel Comp, Cadmium and Chromate Plated
No. 10-32 UNF-2A No. 4-40
Shldr Lg
Fas Lg Thd Lg Lg 00-855-1444 .375
00-038-8042 .381 .188 .204 00-052-6866 .750
01-059-1931 .375
Steel, Cadmium Plated. 01-181-7476 .500
Nylon Locking Element.
No. 10-32 UNF-3A 100 DEGREE FLAT COUNTERSUNK HEAD
Shldr SLOT DRIVE
No. 8-32 UNC-2A. Fas Lg Thd Lg Lg
00-946-8273 .701 .286 .250
Lg
00-251-4004 .250 Steel, Uncoated.
00-078-0246 .750
5/8-18 UNF-3A Steel, Passivated
CRES
Shldr
Fas Lg Thd Lg Lg No. 4, Wide flute thread.
No. 4-40 UNC-2A
00-074-1586 5.288 .452 .748 Lg
Lg
00-822-1780 .625
01-032-1641 .250 HEX DRIVE
PAN HEAD
Iron Alloy, Passivated.
CROSS RECESS DRIVE
No. 6-32 UNJC-3A
Lg
00-901-2137 .312 Steel, Cadmium Plated.
2-31
CLASS 5305
C32 PAN HEAD CROSS RECESS DRIVE, DOG POINT No.14-10
SLOT OR FLUTE STYLE Lg

00-052-8241 .750
Dia Lg
00-052-8875 .086 .235 CRES
00-052-8887 .138 .500
00-052-9048 .164 .250 Steel, Cadmium Plated No. 4-24
00-052-9050 .164 .375
00-052-9052 .164 .625 CROSS RECESS DRIVE, GIMLET POINT Lg
00-063-4568 .190 .750 00-147-3248 .250
00-052-8903 .250 .500
00-052-8904 .250 .625 ROUND HEAD
GIMLET POINT STYLE. GIMLET POINT, CROSS RECESS DRIVE

Dia Lg
00-432-4169 .112 .375
00-497-7401 .138 .500
00-433-3711 .164 .500
00-432-7956 .164 .250 Steel Cadmium Plated
00-147-3238 .190 .500
00-052-8242 .242 .875 No. 4-24
00-734-7121 .250 .500 Lg Steel, Cadmium or Zinc Plated
Steel Comp, Cadmium and Chromate Plated. 00-954-5207 .250
00-879-3825 .281 No. 7-16
00-432-4173 .500
No. 6-32
00-854-6692 .625 Lg
Lg 00-016-1615 .625
00-855-0972 .375 No. 6-20
Lg SCREW, WOOD
C33 PAN HEAD
00-432-4163 .375
00-432-4164 .500 82 DEGREES FLAT COUNTERSUNK HEAD
GIMLET POINT STYLE 00-432-4165 .625
Dia Lg 00-432-4166 .750 GIMLET POINT, CROSS RECESS DRIVE
00-637-4521 .151 .750
No. 8-15
00-637-4522 .151 1.000
Lg
CRES 00-883-0628* .500
00-899-7647 .875 Copper Alloy
No. 2-32 * Non Spec Item
Lg No. 4
No. 8-18
00-051-8499 .188 Lg
Lg 00-014-9211 .500
No. 8-24 00-058-1082 .375 00-900-9012 .625
00-432-4170 .500 00-900-3272 .750
Lg
00-432-4171 .625 00-900-3274 1.000
00-052-9051 .500 00-432-4172 .750
00-432-7954 1.000 No. 6
No. 10-24 00-472-5252 1.500
Lg
Lg
No. 10-12 00-014-9247 .500
00-951-5617 .500 00-901-3787 .625
Lg 00-786-5503 .750
1/4-20 00-879-7941 .500 00-901-3788 .875
00-901-3795 1.000
Lg
No. 10-16 00-014-9262 1.250
00-052-8907 1.000 00-901-3790 1.500
Lg
C1 HEXAGON HEAD 00-432-4202 .625 No. 8
00-432-4203 .750
SLOT DRIVE 00-432-4205 1.000 Lg
00-432-4210 1.500 00-014-9289 .500
Dia Lg 00-901-3792 .625
00-181-0855 .138 .310 No. 12-11 00-901-3793 .750
01-063-6417 .250 1.225 00-901-3794 .875
Lg 00-014-9301 1.000
SCREW, TAPPING, THREAD 00-052-8238 .500 00-014-9304 1.250
FORMING 00-052-8240 .750 00-014-9307 1.500
00-052-7500 1.000 00-901-2630 1.750
82 DEGREES FLAT COUNTERSUNK HEAD 00-052-7405 1.250 00-901-2631 2.000
2-32
CLASS 5305
No. 10 GIMLET POINT, CROSS RECESS DRIVE
Lg
00-901-3124 .750
00-014-9349 1.000
00-014-9352 1.250
Copper Alloy Steel
00-014-9355 1.500
00-901-3127 1.750
00-901-3128 2.000 No. 4 5/16-18 UNC-2A
00-014-9367 2.500 Lg
Lg
00-900-3276 .500 00-213-0340 1.277
No. 12
Lg No. 6 1/4-28 UNF-2A
00-180-1995 .750 Lg
00-901-3129 1.000 Lg
00-901-3130 1.250 00-901-2101 .500 00-264-5925 .715
00-901-3131 1.500 00-901-2103 .750
00-901-3132 1.750 00-015-0859 1.000 CROSS RECESS DRIVE, CHAMFER DOG
00-901-3133 2.000 00-901-2106 1.250 POINT
00-014-9394 2.500
00-014-9400 3.000 No. 8
No. 14 Lg
00-901-2108 .500
Lg 00-959-1536 .750 Steel
00-014-9412 1.750 00-901-2111 .875
00-901-3136 2.000 00-015-0919 1.000 HEADLESS
00-901-3117 2.500 00-901-2113 1.250
00-014-9427 3.000 00-901-2114 1.500
CROSS RECESS DRIVE, CONE POINT
Steel, Cadmium or Zinc Plated No. 12
No. 6 Lg
00-015-0995 .750
Lg 00-015-1001 1.000
00-224-0147 .750 00-901-2612 1.250 Nickel Alloy
00-901-2614 2.000
No. 8 No. 10-24 UNC-3A
3/16
Lg Lg
00-722-4630 1.250 Lg 00-273-9361 .500
00-014-9926 .725
No. 12 1/4-20 UNC-3A
SLOT DRIVE WOOD SCREW STYLE
Lg Lg
00-157-5632 1.250 00-207-1406 .375
CRES, Nonmagnetic CROSS RECESS DRIVE, CUP POINT
No. 10
Lg
00-543-5391 1.000
Steel, Passivated Steel, Cadmium Plated
No. 14
Lg No. 10 No. 2-56 UNC-3A
00-543-5400 2.000 Lg Lg
00-543-5425 1.000 00-660-2840 .094
SLOT DRIVE
WOOD SCREW STYLE CRES
5/32 No. 6-40 UNF-2A
Lg Lg
Copper Alloy
00-533-5446 .725 00-206-2080 .125
No. 6
CROSS RECESS DRIVE, FLAT POINT
SETSCREW
Lg
00-010-2108 1.000 FLAT CHAMFER HEAD
ROUND HEAD SLOT DRIVE, FLAT POINT
2-33
CLASS 5305
Copper Alloy SLOT DRIVE, FLAT POINT
No. 10-24 UNC-3A

Lg
00-253-4924 .375
Nickel Alloy Copper Alloy
Nickel Alloy
No. 10-32 UNF-2A No. 10-24 UNC-3A
No 10-24 UNC-3A
Lg Lg
Lg 00-483-1451 .750 00-206-1975 .250
00-550-9523 .250
00-207-1399 .375 Steel, Oxide O/A 1/4-20 UNC-3A
No. 10-32 UNF-3A Lg

No. 6-32 UNC-2A
00-206-2285 .375
Lg Lg
00-473-4011 .250 00-163-1930 .188 5/16-24 UNF-3A
CRES Lg
HEADLESS
00-206-2113 .250
No. 10-24 UNC-2A SLOT DRIVE, OVAL POINT
Nickel Alloy
Lg
00-638-1782 .562 No. 8-32 UNC-3A
CROSS RECESS DRIVE, OVAL POINT Lg

00-840-6884 .188
Nickel Alloy 00-605-2172 .250
No. 8-32 UNC-3A 1/4-20 UNC-3A
Nickel Alloy Lg Lg
00-473-1090 .375 00-841-3998 .250
1/4-20 UNC-3A 00-275-8438 .312
1/4-20 UNC-3A 00-375-7417 .500
Lg
00-263-5098 .375 Lg 5/16-18 UNC-3A
00-206-2098 .500
Lg
SLOT DRIVE, DOG POINT
SOCKET (HEXAGON) DRIVE, CONE POINT 00-206-3454 .312
Steel
No. 4-40 UNC-3A

Copper Alloy Lg
Steel, Cadmium Plated 00-336-2152* .125
5/16-24 UNF-3A * AN-565 D4H2
Lg No. 4-40 UNC-2A
No. 10-32 UNF-2A
01-104-1052 2.625 Lg
Lg
01-045-2457 .317
No. 4-40 UNC-3A
1/4-28 UNF-3A No. 5-40 UNC-2A
Lg
Lg Lg
00-051-4484 .188
00-734-0765 .556 00-728-5489 .312 00-283-1909 .125
Steel No. 8-32 UNC-3A Steel, Cadmium Plated
3/8-16 UNC-3A Lg No. 2-56 UNC-3A

00-051-4502 .125
Lg Lg
00-056-9536 .687 Steel, Passivated 00-639-7715 .062
00-717-6955 .125
Steel Passivated 1/4-20 UNC-3A
No. 4-40 UNC-3A
No. 4-40 UNC-3A Lg
Lg
00-274-0023 .250
Lg 00-717-6950 .125
00-832-9849 .455 SOCKET (HEXAGON) DRIVE, CUP POINT 00-717-6949 .188
2-34
CLASS 5305
No. 6-12 UNC-3A No. 6-32 UNC-3A
Lg Lg 00-272-3683 .375
00-719-5329 .125 01-007-1517 .188
00-719-5330 .188 00-272-4123 .250 HEADLESS, SOCKET (HEXAGON) DRIVE,
00-719-5339 .250 00-282-8902 .375 FLAT POINT
No. 8-32 UNC-3A No. 8-32 UNC-3A

Lg Lg
00-719-5336 .125 00-579-0093 .125
00-719-5342 .188 00-607-1326* .250
01-102-1861* .188 * Non Spec Item Steel, Cadmium Plated
00-719-5346 .250
00-719-5337 .312 No. 10-32 UNF-3A No. 4-40 UNC-3A
00-719-5349 .375
* With self locking feature. Lg Lg
00-281-3120 .187 00-724-6777 .125
No. 10-24 UNC-3A
1/4-20 UNC-3A No. 6-30 UNC-3A
Lg
00-723-9398 .250 Lg Lg
00-723-9396 .375 00-638-8753 .375 00-421-7853 .438
00-723-9394 .500
5/16-18 UNC-3A 1/4-28 UNF-3A
No. 10-32 UNF-3A
Lg Lg
Lg 00-682-5972 .375 00-728-6315 .250
00-724-6798 .250 00-193-8868* .880
00-724-6799 .375 No. 4-40 UNC-2A * Non Spec Item
1/4-20 UNC-3A Lg 3/8-24 UNF-3A

01-130-0585* .103
Lg * Non Spec Item Lg
00-723-9387 .250 00-638-1878* .437
00-723-9386 .312 No. 4-40 UNC-3A * Non Spec Item
00-723-9385 .375
00-723-9384 .438 Lg CRES
00-723-9383 .500 00-800-7261 .125
00-723-9378 1.250 00-655-9246 .188 No. 2-56 UNC-3A
00-543-5832 .250
1/4-28 UNF-3A Lg
No. 6-32 UNC-3A 00-877-5377 .062
Lg
00-724-5811 .250 Lg 1/4-20 UNC-2A
00-724-5813 .375 00-531-0137 .125
00-724-5815 .500 00-576-7266 .188 Lg
01-062-6452* .312
5/16-18 UNC-3A No. 8-32 UNC-3A * Locking feature
Lg Lg HEADLESS, SOCKET (HEXAGON) DRIVE,
00-724-5893 .250 00-812-6962* .125 FULL DOG POINT
00-724-5898 .375 00-551-0156 .188
00-724-5903 .500 00-281-3118 .250
00-724-5834 .750 00-082-6782 .500
* With Self Locking Feature
3/8-16 UNC-3A
No. 10-24 UNC-3A Copper Alloy
Lg
00-724-6810 .375 Lg
No. 12-28 UNF-3A
00-724-5884 .500 00-821-3597 .375
00-724-5882 .750 Lg
00-724-5886 .875 No. 10-32 UNF-3A 01-103-8804 .281
00-724-5887 1.000
Lg
Nickel, Alloy
CRES 00-272-3533 .250
1/4-20 UNC-2A
No. 2-56 UNC-3A 5/16-18 UNC-3A
Lg
Lg Lg
00-273-5857 .312
00-843-2841 .125 00-682-5971 .250
00-901-3083* .125 Steel
00-685-3344 .312 1/2-13 UNC-3A
* With Self locking feature.
1/2-13 UNC-3A
2-35
CLASS 5305
Lg Lg
01-034-0564* .625 00-098-4757 1.750
* With Self Locking Feature
HEXAGON HEAD, WITHOUT INTERNAL
CRES Nickel Alloy DRIVE
No. 6-32 UNC-3A No. 10-24 UNC-3A CHAMFER, DOG POINT

Lg Lg
00-807-7975* .156 00-789-2256 .250
00-685-3097 .375
* AN565CC6H6
Non Spec Item
1/4-20 UNC-3A
HEADLESS, SOCKET (HEXAGON) DRIVE,
HALF DOG POINT Lg Cadmium Plated
00-715-1215 .250
00-715-1209 1.000 No. 10-32 UNF-3A
Lg
HEADLESS, SPLINE DRIVE,
00-785-9352 .670
Nickel Alloy
6 SPLINES, FLAT POINT
5/16-18 UNC-3A DRIVE
Lg FLAT POINT
00-206-4674 .375

Copper Alloy, Nickel Plated
No. 6-40 UNF-3A
No. 10-32 UNF-3A
Lg
Lg
01-221-3230 .218
00-687-3284 1.500
1/4-20 UNC-3A
Lg DRIVE, BALL POINT Drilled head
00-058-9379 .375
00-058-9380 .500 1/4-28 UNF-3A
Lg
1/4-28 UNF-3A
00-936-5995 .393
Lg
00-059-2490 .375 HEXAGON HEAD, WITHOUT INTERNAL
DRIVE
1/2-13 UNC-2A
5/16-18 UNC-3A
Lg OVAL POINT
Lg 01-046-3018* 2.375
00-058-9385 .375 * Non Spec Item
3/8-16 UNC-3A HEXAGON HEAD, WITHOUT INTERNAL

DRIVE
Lg
00-058-9389 .500
DOG POINT Steel
3/8-24 UNF-3A
5/8-18 UNF-3A
Lg
00-823-5719 1.000 Lg
01-103-7896* 1.000
HEADLESS, SOCKET (HEXAGON) DRIVE, * With self locking feature
FULL DOG POINT
SQUARE WEDGE HEAD WITHOUT INTERNAL
Steel, Cadmium Plated DRIVE, FLAT POINT
Steel Comp, Passivated and Oxide Treated.
5/16-24 UNJF-3A
No. 12-28 UNF-3A
Lg
Lg
00-497-7311* 2.715
01-369-0768 .281
* With hole
HEADLESS, SOCKET (HEXAGON) DRIVE,
OVAL POINT 9/16-18 UNF-3A Copper Alloy
2-36
CLASS 5305
3/4-10 UNC-2A Steel, Zinc Plated
Lg 3/8-16 UNC-2A
00-216-8007 2.500
Fas Lg Thd Lg
THUMBSCREW 00-276-3280 2.500 2.500
KNURLED ROUND HEAD, FLAT POINT Steel, Cadmium Plated

Steel
3/8-16 UNC-2A
Fas Lg Thd Lg
00-363-8051 2.313 .718

5/16-18 UNC-2A
1/4-28 UNF-3A
Fas Lg Thd Lg
Fas Lg Thd Lg 00-263-3585 .500 .500
00-934-0000 .875 .313 00-248-6809 1.000 1.000
THUMB HEAD, CUP POINT THUMB HEAD, OVAL POINT

No. 10-24 UNC-2A
WING HEAD, FLAT POINT
Fas Lg Thd Lg
00-809-1936 .797 .797
CRES
Steel
Fas Lg Thd Lg
00-263-3586 .688 .688 Copper Alloy
THUMB HEAD, FLAT POINT 5/16-18 UNC-2A

1/4-20 UNC-2A Fas Lg Thd Lg
Fas Lg Thd Lg 00-275-5408 1.000 .750
00-118-2933 .750 .750
2-37
2-38
Phone (215) 737-2336
DSN 444-2336
CLASS 5306
BOLTS
NOTE: As non-plastic alternatives to plastic items currently in us are identified, information will be provided through shopping advisory
BOLT, ASSEMBLED WASHER

HEXAGON HEAD 00-144-3852 1.047 .688 00-151-0330* 2.281 1.812
* Drilled head and shank
Steel, flatwasher. Head height .234 inch, width 1/220UNF-3A
across flats .500 inch, washer diameter .500 5/16-24 UNF-3A
Fas Lg Grip Lg
inch. Fas Lg Grip Lg
00-151-6234* 3.422 3.000
* Without hole. 00-151-1180* 3.344 2.812
5/16-18 UNC-2A
* Drilled head and shank
00-613-9396 .875 5/8-18 UNF-3A
3/8-24 UNF-3A
Steel composition, spring tension washer. Head Fas Lg Grip Lg
height .094 inch, width across flats 1.062 inch, 00-151-0277 1.625 1.125 Fas Lg Grip Lg
washer diameter 1.547 inch, 25 to 34 Rockwell 00-151-2322* 2.328 1.688
hardness rating. 3/4-16 UNF-3A * Drilled head and shank
Fas Lg Grip Lg Wheel bolts with external spline drive. Steel,

11/16-11 UNS-2A
00-156-2753 3.688 3.125 Cadmium Plated. Top of bolt head painted white.
00-953-0262 3.344 Dimensions listed in inches.
BOLT, CLOSE TOLERANCE
Steel, Zinc Plated. Flat washer with external 1/4-28 UNJF-3A
teeth. Head height .188 inch, width across flats
HEXAGON HEAD
1.062 inch, washer diameter. .469 inch. Fas Grip Ext Wash
Lg Lg Dia Thk
1/4-20 UNC-2A Steel Alloy, Cadmium Plated. Drilled head. Bolt 01-064-6263 1.156 1.000 .250 .047
head marked with an X within a triangle. Air
00-208-1601 .500 Force-Navy Aeronautical Standard. Fastener 5/16-24 UNJF-3A
and grip length shown in inches.
BOLT, CLEVIS Fas Grip Ext Wash
No. 10-32 UNF-3A Lg Lg Dia Thk
AIRCRAFT CLEVIS BOLTS. Steel Alloy, 01-064-6264 1.891 1.250 .531 .062
Fas Lg Grip Lg
Cadmium Plated. Button head, slot drive. Drilled
shank. Head marked with single or double X. 01-018-5600 .797 .375 Steel, Cadmium Plated
Air Force-Navy Aeronautical Standard. Fastener
and grip length shown in inches. 1/4-28 UNF-3A 1/2-20 UNJF-3A
Fas Lg Grip Lg Fas Grip Ext Wash
00-285-5325 .906 .438 Lg Lg Dia Thk
00-127-3439 1.703 .750 .828 .125
5/16-24 UNF-3A
Fas Lg Grip Lg BOLT, EYE
00-144-4048 1.969 1.438
No. 10-32 UNF-3A AIRCRAFT SHOULDERED TYPE
00-144-4051 2.344 1.812
Fas Lg Grip Lg
1/4-28 UNF-3A Steel, Cadmium Plated. Applicable Air
00-151-1962 .656 .312 Force-Navy Aeronautical Standard. Shank
00-151-1963 .719 .375 Fas Lg Grip Lg length and grip length shown in inches. With hole
00-151-1964 .781 .438
00-180-1739* 1.656 1.188 in shank.
00-151-1965 .844 .500
00-151-1969 1.094 .750 00-283-0169* 2.031 1.562
00-151-1970 1.156 .812 * Drilled Shank
00-151-1972 1.281 .938
10-32 NF-3A
Fas Lg Grip Lg 00-174-4108* 1.156 .750
00-156-2699 .969 .625 * Drilled Shank
00-156-2703 1.219 .875
00-151-0524 1.406 1.062 1/428 UNF-3A No. 10-32 UNF-3A
5/16-24 UNF-3A
2-39
CLASS 5306
Shank Thd
Lg Lg. Eye ID
00-638-2217 .664 .414 .191
1/4-28 UNF-3A
Shank Thd
Lg Lg. Eye ID 1/4-28 UNF-3A
00-613-9038* .531 .469 .191 1/2-13 UNC-2A Fas Lg Thd Lg
* Without hole in shank
Fas Lg Thd Lg Eye ID 00-206-1353 1.125 .500
EYE COLLAR TYPE 00-276-1396* 1.875 1.500 .377
* Includes one each, Brass wing nut and 3/8-24 UNF-3A
Steel. Shank length and inside diameter of eye cotter pin.
Fas Lg Thd Lg
shown in inches. 00-638-1171 2.438 .688
Steel.
Drilled head, 4 holes.
5/8-11 UNC-2A
Fas Lg Thd Lg Eye ID 1/4-28 UNF-3A
00-263-7014 2.250 2.250 1.375 Fas Lg Thd Lg
00-639-1791 .750 .500
1/4-20 UNC-3A
FLAT, CHAMFER HEAD, HEXAGON SOCKET
Shank No. 5-40 UNC-2A DRIVE
Lg Thd Lg Eye ID
Fas Lg Thd Lg Eye ID
00-975-7630 1.625 .219 .188 Steel, Cadmium Plated. Undrilled. Fastener
00-181-6086 .406 .169 .188
length and thread length shown in inches.
3/8-16 UNC-2A
Steel, right hand thread, B9 round, closed.
No. 10-32 UNF-3A
Shank
Lg Thd Lg Eye ID 5/8-11 UNC-2A Fas Lg Thd Lg
00-272-2138 1.000 .937 1.375 00-440-5745 1.132 .382
Shank Lg Eye ID
1/2-13 UNC-2A 01-417-7829 4 1.25 No. 8-32 UNJC-3A
Shank 1/2-13 UNC-2A Fas Lg Thd Lg
Lg Thd Lg Eye ID
00-392-0742* .984 .422
00-266-7557 1.500 .625 1.188 Shank Lg Eye ID
* Iron Alloy, Cadmium Plated
00-272-2135 1.500 1.500 1.625 01-424-5713 6 1.00
1/2-13 UNC-3A
5/8-11 UNC-2A BOLT, FIREBRICK ANCHOR
Fas Lg Thd Lg
Shank
Lg Thd Lg Eye ID SQUARE HEAD, STRAIGHT END 00-983-7461 1.250 1.250
00-017-6143 1.815 1.380 1.375 5/8-11 UNC-3A
ANCHOR BOLT. Steel, Corrosion Resisting.
3/4-10 UNC-2A Used in anchoring firebricks in oil-fired boilers of Fas Lg Thd Lg
Naval vessels. Fastener length shown in inches.
00-983-7478 2.220 2.129
Shank
Lg Thd Lg Eye ID Fas Lg
3/4-16 UNF-3A
00-272-2136 1.750 1.750 1.875 00-558-9326 7.500
00-558-9323 10.500 Fas Lg Thd Lg
1-8 UNC-2A 00-860-3956 2.793 1.310
Shank BOLT, HOOK
Lg Thd Lg Eye ID BOLT, MACHINE
00-271-6819 2.500 2.500 1.812 3/3-16 UNC-2A
CROWNED HEXAGON HEAD
Steel, Passivated. Threaded length 2.500, 8 inch distance inside of
bend to shank end. Steel Alloy, Cadmium Plated. Undrilled. Aircraft
Fas Lg Thd Lg Eye ID Type. Bolt head marked with X. Fastener and
01-391-0351 minimum grip length shown in inches. Items
3/8-16 UNC-2A without grip length are fully threaded.
00-905-0698 3.250 3.250 .250

BOLT, INTERNAL WRENCHING
BEVELED HEAD, HEXAGON SOCKET DRIVE
PLAIN EYE TYPE
Steel, Cadmium Plated. Undrilled. Tensile
Copper Alloy. Material, shank length and inside
strength 160,000 PSI. Military Standard,
diameter of eye shown in inches. Drilled head, 1 hole.
fastener and thread length shown in inches.
1/4-28 UNF-3A
2-40
CLASS 5306
Fas Lg Grip Lg Fas Lg Grip Lg Fas Lg Thd Lg G.E. No.
00-935-3062 1.125 .071 00-966-2427 .750 .750 * United Tech Corporation, Pratt and Whitney
DOUBLE HEXAGON EXTENDED WASHER Undrilled. HEXAGON HEAD

HEAD BOLTS.
5/16-24 UNF-3A Aluminum Alloy, Anodized. Bolt head marked
Iron Alloy. Fastener and thread length shown in with double dash. Fastener and grip length
inches. Fas Lg Grip Lg shown in inches.
00-808-6361 1.250 .875
Undrilled.
1/4-28 UNF-3A
Iron Alloy.
Drilled head, 4 holes. Fas Lg Grip Lg
1/4-28 UNJF-3A 00-275-9644 .781 .312
No. 10-32 UNJF-3A 00-810-3765 2.156 1.688
Fas Lg Grip Lg
Fas Lg Grip Lg 00-250-6254 .938 .750 Drilled head, 1 hole.
00-775-6235 .438 .356
00-775-6243 .500 .413 Iron Alloy, undrilled. 1/4-28 UNF-3A
No. 10-32 UNJF-3A No. 10-32 UNJF-3A Fas Lg Grip Lg

00-174-4091 .484 .062
00-915-4659 .750 .655 00-106-6321 .562 .480 Steel, Cadmium Plated. Bolt head marked with
00-113-3771 .625 .543 an X. Fastener and grip length shown in
1/4-28 UNF-1A inches.
Fas Lg Grip Lg Undrilled.
00-846-9547 .562 .491 Nickel.
No. 10-32 UNF-3A
1/4-28 UNJF-3A No. 10-32 UNJF-3A
Fas Lg Grip Lg
00-150-9221 .469 .062
00-143-1765 .625 .536 01-004-6882* .438 .407 00-722-0393 .531 .125
00-139-0011 .938 .780 * 2 Holes 00-274-2119 .656 .250
00-656-0358 .781 .375
No. 10-32 UNF Undrilled. 00-151-0785 .915 .500
00-151-0784 1.039 .625
Undrilled. Nickel. 00-685-3027 1.156 .750
00-151-0782 1.289 .882
Fas Lg Grip Lg 1/4-28 UNJF-3A 00-151-0781 1.415 1.000
00-685-0196 .625 .594 00-151-0780 1.539 1.125
00-467-0871 .812 .776 00-151-0779 1.663 1.250
No. 10-32 UNJF-3A 00-174-8562 .875 .780 00-151-0778 1.781 1.375
00-308-3519 1.000 .732 00-151-0777 1.906 1.500
Fas Lg Grip Lg 00-174-8563 1.250 .780
00-947-4228 .625 .594 00-084-3318 1.500 .780 1/4-28 UNF-3A
01-165-7518 2.000 .780
No. 10-32 UNJF-3A Fas Lg Grip Lg
Nickel Alloy. 00-150-9105 .539 .062
Fas Lg Grip Lg 00-151-1427 .656 .188
00-117-4737 .750 .654 No. 10-31 UNJF-3A 00-151-1426 .781 .383
00-993-8035 .875 .650 00-515-8064 .906 .438
00-523-2860 .812 .654
00-551-4845 .938 .660 00-151-1424 1.031 .562
00-151-1423 1.156 .688
Steel. 00-151-1422 1.281 .812
1/4-28 UNF-1A
00-151-1421 1.406 .938
Fas Lg Grip Lg 1/4-28 UNJF-3A 00-151-1420 1.531 1.062
00-616-1534 .875 .780 00-097-7306 .750 .750 00-151-1419 1.656 1.188
00-097-7307 .938 .780 00-151-1418 1.781 1.312
1/4-28 UNJF-3A 00-151-1417 1.906 1.438
00-151-1416 2.031 1.562
5/16-24 UNF-3A
Fas Lg Grip Lg 00-151-1415 2.156 1.688
00-402-5753 .875 .780 00-913-8708 1.750 1.322 00-180-2705 2.281 1.812
00-151-1413 2.406 1.938
Drilled head, 4 holes. Titanium Alloy. 00-151-1412 2.531 2.062
00-151-1411 2.665 2.188
Steel, Cadmium Plated. 1/4-28 UNJF-3A 00-151-1410 2.789 2.313
Fas Lg Thd Lg G.E. No. 5/16-24 UNF-3A

5/16-24 UNF-3A
00-939-9738* .750 .679 504103
2-41
CLASS 5306
Fas Lg Grip Lg Fas Lg Grip Lg Fas Lg Grip Lg
00-616-2618 1.352 .816 00-637-8591 .953 .312 00-754-3048 .805 .125
00-151-2626 1.469 .938 00-167-3708 4.836 4.188 00-807-6895 1.269 .750
3/8-24 UNF-3A 1/2-20 UNF-3A 3/8-16 UNC-3A

Fas Lg Grip Lg Fas Lg Grip Lg Fas Lg Grip Lg
00-180-0238 .703 .062 00-150-9990 1.102 .312 00-957-7853 1.305 .625
00-616-1224 .852 .188 00-811-9219 1.429 .750
00-531-8979 .953 .312 5/8-18 UNF-3A
00-208-3636 1.078 .438 Drilled head and shank, 1 hole.
00-180-1483 1.203 .562 Fas Lg Grip Lg
00-144-4004 1.328 .688 00-151-1461 3.028 2.063 1/4-28 UNF-3A
00-180-1485 1.453 .812 00-151-1454 3.899 2.938
00-281-8477 2.078 1.438 00-151-1452 4.146 3.188 Fas Lg Grip Lg
00-208-3654 2.203 1.562 00-180-2711 3.031 2.562
00-582-6411 3.078 2.438 Drilled head, 1 hole.
00-582-6692 3.828 3.188 Undrilled.
00-275-9561 4.078 3.438 No. 10-32 UNF-3A
00-145-0934 4.711 4.062 No. 10-32 UNF-3A
Fas Lg Grip Lg
7/16-20 UNF-3A 00-182-2056 .469 .062 Fas Lg Grip Lg
00-182-2057 .531 .125 00-721-7610 .669 .188
Fas Lg Grip Lg
00-182-2058 .656 .250
00-180-0261 1.469 .812 Steel, Cadmium Plated.
1/4-28 UNF-3A
1/2-20 UNF-3A 1/4-28 UNJF-3A
Fas Lg Grip Lg
00-182-2014 .469 .062
00-207-4575 .977 .188 00-182-2015 .531 .062 00-702-3998* .739 .312
00-208-3646 1.219 .438 00-182-2016 .656 .188 * 160,000 PSI minimum tensile
00-206-9572 1.344 .562 00-182-2017 .781 .312 strength.
00-206-4539 1.969 1.188 00-292-8252 .915 .438
00-208-3649 3.844 3.062 00-182-1958 1.031 .562 Steel, Corrosion Resisting. Heat resisting Steel.
00-207-9791 3.406 2.938 For use in aircraft accessories and engines
3/4-16 UNF-3A 00-638-5766 3.531 3.062 where temperatures do not exceed 1200
degrees Fahrenheit. Head marked 1200.
Fas Lg Grip Lg Fastener and grip length shown in inches.
5/16-24 UNF-3A
00-180-1442 2.406 1.312
00-845-4955 5.781 4.688 Fas Lg Grip Lg Undrilled.
00-182-2023 .594 .062
Drilled shank. 00-182-2024 .719 .188 No. 10-32 UNF-3A
00-182-2025 .844 .312
No. 10-32 UNF-3A 00-182-2026 .969 .438 Fas Lg Grip Lg
00-182-2027 1.094 .562 00-827-1972 .547 .125
Fas Lg Grip Lg 00-182-2028 1.219 .688 00-754-1794* .680 .328
00-151-3015 .469 .062 * UNJF
00-144-3646 .531 .125 3/8-24 UNF-3A
00-715-0566 .656 .250 1/4-28 UNJF-3A
00-680-6779 .781 .375 Fas Lg Grip Lg
00-144-3648 .915 .500 00-926-5680 4.836 4.187 Fas Lg Grip Lg
00-685-2634 1.406 1.000 00-971-7659 .649 .125
3/4-16 UNF-3A
1/4-28 UNF-3A Steel, Corrosion Resisting, Passivated. Head
Fas Lg Grip Lg marked with dash. Fastener and grip length
Fas Lg Grip Lg 00-240-6487* 4.250 2.470 shown in inches.
00-144-3706 .906 .438 * Drilled head, 2 holes.
00-855-3610* 1.415 .938 Undrilled.
00-182-1913 2.031 1.562 Drilled head, 6 holes.
00-180-2705 2.281 1.812 No. 10-32 UNF-3A
00-151-1135 3.781 3.312 No. 10-32 UNF-3A
* AN174-13 Fas Lg Grip Lg
Fas Lg Grip Lg 00-156-2336 .469 .062
5/16-24 UNF-3A 00-754-3049 .601 .062 00-150-9528 .531 .125
00-150-9527 .656 .250
Fas Lg Grip Lg
1/4-20 UNC-3A 00-156-2327 .789 .375
00-180-2750 1.227 .688 00-182-1857 1.039 .625
00-180-2751 1.344 .812 Fas Lg Grip Lg
00-180-2752 1.469 .938 00-754-1788 .663 .125 1/4-28 UNF-3A
00-825-4422 .906 .375
1/4-28 UNF-3A 00-156-2337 .665 .188
00-156-2338 .781 .312
2-42
CLASS 5306
Iron Alloy. Undrilled. Fastener and thread length
Fas Lg Grip Lg shown in inches. Fas Lg Grip Lg
00-156-2339 .906 .438 00-206-2938 1.500 .874
00-156-2341 1.156 .688 No. 10-32 UNJF-3A
00-156-2347 1.906 1.438 Nonmagnetic. Used for the construction, repair
00-156-2348 2.031 1.562 Fas Lg Grip Lg and maintenance of wood hull vessels and
00-116-7790 .688 .082 associated equipment.
5/16-24 UNF-3A 00-121-2676 .875 .660
3/8-16 UNC-2A
Fas Lg Grip Lg
00-182-1950 .969 .438 Fas Lg Grip Lg
00-182-1951 1.102 .563 Iron Alloy, Silver Plated. 00-543-5468 1.000 .907
00-182-2052 1.602 .063
No. 10-32 UNF-3A 1/2-13 UNC-2A
3/8-24 UNF-3A
Fas Lg Grip Lg
00-422-2543* .438 .082 00-543-5480 1.500 1.250
00-207-5916 .703 .062 00-543-5481 2.000 1.250
* UNJF Thread Series
00-637-7696 .836 .188 00-543-5482 2.500 1.250
No. 10-32 UNJF-3A
Drilled head, 1 hole. Nickel Alloy.
Fas Lg Grip Lg
No. 10-32 UNF-3A 00-997-2533* .500 .418 5/16-18 UNC-2A
00-538-7797 .688 .082
* UNJF Thread Series
00-182-1853 .539 .125 00-282-9603 .750 .750
00-182-1854 .641 .250 Fas Lg Grip Lg 00-282-9648 1.000 1.000
00-116-1426* .438 .089 00-282-9646 1.500 .875
1/4-28 UNF-3A * UNJF Thread Series 00-281-1584 1.968 1.968
Fas Lg Grip Lg Steel, Cadmium Plated. Nickel Copper Alloy. For general purpose use.
00-180-2778 .531 .062
00-180-2779 .656 .188 No. 10-32 UNF-3A 1/4-20 UNC-2A
5/16-24 UNF-3A Fas Lg Grip Lg Fas Lg Thd Lg
00-803-7108 .500 .500 00-174-9743 1.500 .750
Fas Lg Grip Lg
00-174-9744 1.750 .750
00-182-1951 1.078 .562 1/4-28 UNJF-3A
00-182-2052 1.601 1.062 3/8-16 UNC-2A
Fas Lg Grip Lg
Steel, Corrosion Resisting, Silver Plated. 00-116-1422 .688 .089 Fas Lg Thd Lg
Fastener length shown, fully threaded. 00-174-9761 1.750 1.000
Steel, Oxide Plated. 00-174-9766 3.250 1.000
No. 10-32 UNF-3A 1/2-13 UNC-2A
1/4-28 UNF
Fas Lg Grip Lg Fas Lg Thd Lg
Fas Lg 00-787-2237 .438 .438 00-226-9820 1.062 1.062
00-616-2980 .438 00-299-2820 4.500 1.173
1/4-28 UNF-3A
Steel, Corrosion Resisting, Passivated. 5/8-11 UNC-2A
Fas Lg Grip Lg
Drilled shank. 00-806-2206 .625 .625 Fas Lg Thd Lg
00-299-2827 1.750 1.500
1/4-28 UNF-3A 5/16-24 UNJF-3A 00-299-2837 4.500 1.500
00-299-2838 5.000 1.500
00-151-2797 1.665 .188 00-446-9304 1.000 .095 3/4-10 UNC-2A
1-14 UNF-3A HEXAGON HEAD Fas Lg Thd Lg

00-174-9731 4.500 1.750
Fas Lg Grip Lg Aluminum Alloy Anodized. Fastener and thread 00-174-9732 5.000 1.750
00-576-2623 6.125 4.750 length shown in inches. General purpose use.
7/8-9 UNC-2A
Steel, Cadmium Plated. 1/4-20 UNC-2A
Fas Lg Thd Lg
1/4-28 UNF-3A Fas Lg Grip Lg 00-299-2756 3.250 2.000
00-543-5606 .875 .750 00-299-2757 3.500 2.000
Fas Lg Grip Lg 00-299-2758 3.750 2.000
00-151-1942 1.164 .688 For use in precision machine tools and similar
00-855-3610 1.415 .938 applications. Commonly used in tapped holes, 1-8 UNC-2A
but may be used with nuts.
Fas Lg Thd Lg
DOUBLE HEXAGON HEAD WITH
LONGITUDINAL HOLE 5/16-18 UNC-2A 00-299-2771 3.250 2.250
2-43
CLASS 5306
3/4-10 UNC-2A 5/8-11 UNC-2A
Fas Lg Thd Lg
00-299-2772 3.500 2.250 Fas Lg Thd Lg Fas Lg Thd Lg
00-299-2773 3.750 2.250 00-174-9526 2.000 1.750 00-206-4318 2.985 1.516
00-174-9530 2.750 1.766
Steel, Cadmium Plated. Designed for insertion 00-227-0582 3.000 1.766 3/4-10 UNC-2A
through holes in assembled parts and are 00-174-9532 3.250 1.766
normally intended to be tightened or released by 00-174-9533 3.500 1.766 Fas Lg Thd Lg
torquing a nut. 00-174-9535 4.000 1.766 00-174-0532 2.500 1.766
1/4-20 UNC-2A Steel, Cadmium Plated. Cap screw designed for Steel, Corrosion Resisting, Passivated. Fastener
use in precision machine tools and similar and thread length shown in inches.
Fas Lg Thd Lg applications. Commonly used in tapped holes,
00-543-2245 2.000 .766 but may be used with nuts. Marked with three 1/4-20 UNC-2A
dashes spaced 120 degrees apart.
Steel, Zinc Plated. General purpose use. 69,000 Fas Lg Thd Lg
PSI minimum tensile strength. 5/16-18 UNC-2A 00-227-0850 .500 .500
00-227-0852 .750 .656
Fas Lg Thd Lg 00-227-0853 .875 .766
1/4-20 UNC-2A
00-269-4526* .488 .399 00-227-0856 1.500 .766
Fas Lg Thd Lg 00-225-8495 .562 .562 00-227-0857 1.750 .766
00-299-2392 .500 .484 00-225-8496 .625 .625 00-227-0858 2.000 .766
00-299-2393 .750 .766 00-225-8498 .875 .875 00-227-0860 2.500 .766
00-271-2289 1.000 .766 00-225-8499 .984 .875
00-497-7419 1.250 .891 00-225-8503 1.719 .969 5/16-18 UNC-2A
00-271-2290 1.500 .766 00-225-8514 4.500 .891
00-225-8516 4.853 .968 Fas Lg Thd Lg
00-299-2380 2.500 .766
00-299-2381 3.000 .891 * Drilled hole. 00-637-9675 .735 .679
00-299-2382 3.500 .891 00-543-4405 .984 .913
1/2-13 UNC-3A 00-227-0868 1.000 .891
3/8-16 UNC-2A 00-227-0869 1.250 .891
Fas Lg Thd Lg 00-227-0870 1.500 .828
Fas Lg Thd Lg 00-180-0082 3.439 .805 00-227-0871 1.750 .891
00-299-2364 .750 .484 00-227-0872 2.000 .891
00-299-2365 .859 .484 Steel Alloy, Cadmium Plated. Tensile strength 00-227-0874 2.500 .891
00-299-2366 1.000 .984 150,000 PSI. Fastener and thread length shown 00-227-0875 3.000 .891
00-299-2367 1.235 .766 in inches. 00-227-0878 4.000 .891
00-299-2368 1.500 1.016
00-299-2369 1.750 1.016 5/16-18 UNC-2A 3/8-16 UNC-2A
00-299-2370 2.000 1.016
Fas Lg Thd Lg Fas Lg Thd Lg
00-299-2371 2.500 1.016
00-299-2373 3.485 1.016 00-226-4822 .485 .415 00-227-0881 .875 .750
00-299-2374 4.000 1.016 00-226-4825 .735 .665 00-227-0882 1.000 1.000
00-299-2376 5.000 3.188 00-226-4826 .860 .790 00-227-0885 1.750 1.016
00-299-2377 5.985 1.203 00-226-4827 .985 .915 00-274-0905 4.000 1.016
00-226-4828 1.094 .969
7/16-14 UNC-2A 00-226-4829 1.219 .969 7/16-14 UNC-2A
00-226-4830 1.344 .969
00-226-4831 1.469 .969
00-174-9458 2.000 1.266 00-226-4833 1.969 .969 00-227-0896 1.000 1.000
00-226-4835 2.453 .969 00-227-0898 1.500 1.141
1/2-13 UNC-2A 00-226-4837 2.953 .969 00-227-0900 2.000 1.141
00-226-4839 3.453 .969
Fas Lg Thd Lg 00-226-4841 3.953 .969 1/2-13 UNC-2A
00-270-8290 1.250 1.016
00-174-9461 1.250 1.250 Fas Lg Thd Lg
Steel, Zinc Plated. General purpose use. Marked
00-174-9462 1.500 1.266 with three dashes spaced 120 degrees apart. 00-227-0912 1.000 1.000
00-174-9463 1.750 1.266 00-227-0914 1.500 1.266
00-174-9465 2.250 1.250 00-227-0915 1.750 1.266
1/4-20 UNC-2A 00-227-0916* 2.000 1.266
00-174-9466 2.500 .630
00-174-9468 3.000 1.266 Fas Lg Thd Lg 00-227-0918 2.500 1.266
00-174-9470 3.500 2.234 00-227-0920 3.000 1.266
00-270-9381 1.984 .766
00-174-9472 4.000 1.266 00-227-0922 4.000 2.266
00-174-9473 4.500 1.266 * Zinc Plated
3/8-16 UNC-2A
00-174-9479 6.000 1.266
00-174-9481 7.000 1.516 Fas Lg Thd Lg 5/8-11 UNC-2A
00-271-2279 1.000 .984 Fas Lg Thd Lg
5/8-11 UNC-2A 00-576-1032 3.266 1.266
00-227-0927 1.250 1.250
Fas Lg Thd Lg 00-227-0928 1.500 1.500
1/2-13 UNC-2A 00-227-0931 2.500 1.516
00-174-9497 1.500 1.500
00-174-9501 2.250 1.516 Fas Lg Thd Lg 00-227-0932 3.000 1.516
00-281-7116 2.750 1.516 00-227-0933 3.500 1.516
00-275-9787 2.969 1.266 00-227-0934 4.000 1.516
00-174-9505 3.500 1.516
2-44
CLASS 5306
Steel, Corrosion Resisting, Passivated. 5/16-24 UNF-1A
Fas Lg Thd Lg Nonmagnetic. Fastener and thread length given
00-227-0936 5.000 1.516 in inches. Fas Lg Thd Lg
00-576-1632 .625 .625
3/4-10 UNC-2A 1/4-20 UNC-2A
Iron Alloy, Passivated. Drilled shank, 1 hole.
00-227-0939 1.500 1.500 00-087-1628 1.000 .766 1/4-28 UNF-1A
00-227-0941 2.000 1.734 00-543-5562 1.500 .766
00-227-0944 2.500 1.766 00-087-1630 1.750 .766 Fas Lg Thd Lg
00-227-0946 3.000 1.766 00-543-5563 1.984 .734 00-912-9189 .815 .672
00-227-0949 4.000 1.766 00-543-5564 2.500 .766
Iron Alloy, Silver Plated. Drilled head 1 hole.
Steel. 3/8-16 UNC-2A
No. 10-32 UNF-2A
5/8-11 UNC-2A Fas Lg Thd Lg
00-087-0775 .750 .750 Fas Lg Thd Lg
Fas Lg Thd Lg 00-543-5569 .984 .984 00-446-9390 .740 .484
00-208-3988* 2.000 1.266 00-543-5604 1.250 1.016
* Zinc Plated 00-543-5570 1.500 1.016 Steel, Corrosion Resisting.
00-543-5571 1.984 .984
1/4-20 UNC-2A 00-543-5572 2.500 1.016 1/2-28 UNJF-3A
00-087-0779 2.734 1.016
Fas Lg Head H 00-543-5573 3.000 1.016 Fas Lg Thd Lg
01-389-8031 1.000 .188 00-543-5574 3.500 1.016 00-941-0121 .812 .812
5/16-18 UNC-2A 1/2-13 UNC-2A Titanium Alloy, undrilled.
Fas Lg Head H Fas Lg Thd Lg
1/4-28 UNJF-3A
01-389-8039 1.250 .235 00-543-5579 1.750 1.266
00-543-5580 2.000 1.266 Fas Lg Thd Lg
3/8-16 UNC-3A 00-543-5581 3.000 1.266
00-854-0684 .938 .780
Fas Lg Head H 5/8-11 UNC-2A
FLAT CHAMFER HEAD
01-372-0338 1.000 .243
Fas Lg Thd Lg
5/8-11 UNC-2A 00-087-0790 2.000 1.516 Steel, Passivated, undrilled.
00-543-5589 2.500 1.516
Fas Lg Head H 00-543-5591 2.500 1.766 5/16-18 UNC-3A
01-372-4706 1.000 .444
Fas Lg Thd Lg
Steel, Corrosion Resisting, Passivated.
3/8-16 UNC-2A 00-753-4217 1.250 .328
Fas Lg Thd Lg
Fas Lg Grip Lg Head H 00-807-1213 .485 .381 Steel, Cadmium Plated. Drilled head, 3 holes.
01-372-2309 .625 .125 .226 00-720-8260 1.094 .969
00-637-9674 1.219 .969 1/2-20 UNF-3A
1/2-13 UNC-2A
5/16-24 UNF-2A Fas Lg Thd Lg
Fas Lg Grip Lg Head H 00-445-8316 1.590 .780
01-372-0337 2.000 .750 .302 Fas Lg Thd Lg
00-449-0385 .750 .750 Copper Alloy.
Iron Alloy. Undrilled. 00-021-3912 .984 .922
5/16-18 UNC-3A
No. 10-32 UNJF-3A DISHED HEXAGON HEAD
Fas Lg Thd Lg
Fas Lg Thd Lg Steel, Cadmium Plated. Non Spec Items. 00-271-8447 1.250 .641
00-080-0099 .500 .419 01-181-7463* 1.719 1.680
00-080-0100 .562 .480 7/16-20 UNF-3A * Undrilled
00-838-1618 .625 .543
00-050-9401 .688 .606 Fas Lg Thd Lg 5/8-11 UNC-3A
00-080-0109 .750 .654 01-003-0191 3.968 .656
Fas Lg Thd Lg
5/16-24 UNJF-3A DOUBLE HEXAGON HEAD WITH EXTENDED 00-206-3007 1.125 1.047
Fas Lg Thd Lg WASHER
00-458-2233 1.250 .905
Iron Alloy. Drilled head, 4 holes.
No. 8-32 UNC-3A
Drilled head, 1 hole.
1/4-28 UNF-3A Fas Lg Thd Lg
1/4-28 UNJF-3A Fas Lg Thd Lg 00-912-5230 .622 .328
Fas Lg Thd Lg 00-638-1485 1.062 .766
Nickel Alloy.
00-054-1435 .625 .536
01-009-7105 .750 .661 Steel, Nickel and Cadmium Plated.
No. 10-32 UNJF-3A
2-45
CLASS 5306
Fas Lg Thd Lg Fas Lg Thd Lg Fas Lg Grip Lg
00-757-4125* .688 .678 00-554-6893 .835 .675 00-685-1876* 2.423 1.688
* Silver Plated * UNF thread series
SPLINE EXTENDED WASHER HEAD
Steel. No. 10-32 UNJF-3A
Steel, Corrosion Resisting.
3/4-16 UNJF-3A 01-055-3790 .635 .312
Fas Lg Thd Lg 01-242-8712 .823 .500
00-149-9688 1.000 .766 Fas Lg Thd Lg
00-149-1835 3.375 1.009 1/4-28 UNJF-3A
3/8-16 UNC-2A
Fas Lg Grip Lg
Fas Lg Thd Lg BOLT, SELF-LOCKING 01-058-5367 .558 .188
00-270-9417 3.000 1.016 01-169-2070 .682 .312
HEXAGON HEAD 01-058-8403 .808 .438
5/8-11 UNC-3A 01-177-5887 .995 0625
Steel, Cadmium Plated. Nylon insert in thread. 01-100-3985* 1.370 1.00
Fas Lg Thd Lg Fastener length shown in inches. * UNF
00-274-1966 4.750 1.703
No. 10-32 UNJF-3A
1-14 UNS-3A
Fas Lg Grip Lg
Fas Lg Thd Lg 01-136-3540 .407 .062
00-272-4250 3.250 2.250 01-106-8237 .470 .125
01-106-8238 .533 .188
No. 10-24 UNC-2A 01-107-1224 .595 .250
Steel, Cadmium and Chromate Plated.
01-131-7548 .907 .562
Fas Lg 01-197-9414 1.845 1.50
1/4-28 UNC-2A 00-517-6493 .609 01-209-4087 1.970 1.625
Fas Lg Thd Lg
Steel, Corrosion Resisting, Passivated. 1/4-28 UNJF-3A
00-810-6721 .800 .350
1/2-13 UNC-2A
01-142-9400 .613 .188
Fas Lg Thd Lg Fas Lg 01-286-0870 .737 .312
00-537-8198 2.000 1.266 00-839-1758 .625 01-106-5220 .800 .375
00-839-1759 .750 01-058-5372 .863 .438
Steel, Cadmium or Zinc Plated. 01-108-9376 .925 .500
3/8-16 UNC-3A 01-201-2237 .987 .562
01-210-7415 1.050 .625
1/2-13 UNC-3A Fas Lg 01-323-5428 1.113 .688
Fas Lg Thd Lg 00-940-9028* 1.000 01-205-9156 1.175 .750
00-893-6619 1.250 00-163-6805 1.175 .750
00-531-1297 2.000 .766
* 2A thread class 01-108-4418 1.425 1.000
01-202-6848 1.675 1.250
5/8-18 UNF-2A
1/2-13 UNC-3A
Fas Lg Thd Lg 5/16-24 UNJF-3A
Fas Lg
00-206-8544 2.500 1.766 Fas Lg Grip Lg
00-843-9474 1.250
01-152-2593 .781 .312
3/4-16 UNF-2A
5/8-20 UNF-3A
Fas Lg Thd Lg 3/8-24 UNJF-3A
Fas Lg
00-936-0022 1.000 .641 Fas Lg Grip Lg
01-131-6720 .995
Steel, Corrosion Resisting. 01-107-4620 1.140 .562
01-125-9019 2.703 2.125
BOLT, SHEAR
5/16-18 UNC-2A
UNDRILLED, SHORT THREAD
DISHED HEXAGON HEAD
Fas Lg Thd Lg
00-122-9721 1.240 .875 5/16-24 UNJF-3A
Steel Alloy, Cadmium Plated. Undrilled. Close
00-088-1607 2.625 .891 tolerance aircraft bolts. Bolt marked with national Fas Lg Grip Lg
Aerospace Standard part number. Fastener and 00-584-4952 .813 .438
1/2-20 UNF-3A grip length shown in inches.
Fas Lg Thd Lg 1/4-28 UNF-3A
01-190-4554 .852 .673 3/8-24 UNF-3A
Fas Lg Grip Lg DRILLED SHANK
ROUND HEAD W/WRENCH FLATS
00-691-0328 1.390 .812 Fas Lg Grip Lg
Nickel. 00-947-4306* 1.108 .688
1/2-20 UNJF-3A 00-115-6138* 1.487 1.062
1/4-28 UNF-1A * UNJF thread series
2-46
CLASS 5306
5/16-24 UNJF-3A No. 10-32 UNJF-3A
Fas Lg Grip Lg
Fas Lg Grip Lg Fas Lg Grip Lg * UNJF thread series
00-947-7023 1.344 .875 01-120-0867 .823 .500
9/16-18 UNJF-3A
3/8-24 UNF-3A Iron Alloy, Passivated.
Fas Lg Grip Lg
Fas Lg Grip Lg No. 10-32 UNJF-3A 00-827-9941 1.826 1.000
00-823-5698 2.266 1.688
00-964-3125 2.703 2.125 Fas Lg Grip Lg 5/8-18 UNJF-3A
01-133-5812 .470 .125
No. 10-32 UNJF-3A 01-169-9417 .533 .188 Fas Lg Grip Lg
01-168-5628 .595 .250 00-822-2024* 3.123 2.250
Fas Lg Grip Lg 01-237-0521 .657 .312 * UNF thread series
01-073-9174 1.011 .688 01-074-2075 .970 .625
DRILLED HEAD, 4 HOLES.
1/4-28 UNJF-3A 1/4-28 UNJF-3A
5/16-24 UNF-3A
01-143-3989 1.432 1.062 01-155-1880 .487 .062 Fas Lg Grip Lg
01-142-2138 1.558 1.188 01-167-0473 .613 .188 00-016-8286* .634 .062
01-058-7049 1.620 1.250 01-167-0472 1.363 .938 00-849-9347 .763 .188
01-136-7144 1.550 1.125 00-720-8046 .822 .250
DRILLED SHANK, SHORT THREADS * UNJF thread series
DRILLED HEAD, 3 HOLES AND DRILLED
1/4-28 UNF-3A SHANK. DRILLED HEAD, 4 HOLES.
Fas Lg Grip Lg 1/4-28 UNF-3A 3/4-24 UNJF-3A
00-582-8381 1.316 1.000
3/8-24 UNF 00-616-2759 .925 .500 00-889-2933 .807 .188
00-012-0493 1.550 1.125
Fas Lg Grip Lg Steel, Cadmium Plated. Undrilled. Bolt and grip
00-720-8037 1.329 .938 3/4-24 UNF-3A length shown in inches.
7/16-20 UNJF-3A Fas Lg Grip Lg

5/16-24 UNJF-3A
00-958-9318 2.516 1.938
01-190-5770 4.328 3.875 Iron Alloy, Passivated, undrilled. 00-949-3769 1.724 1.125
00-955-8237 1.974 1.375
1/2-20 UNF-3A No. 10-32 UNJF-3A 00-938-6624 2.224 1.625
3/8-24 UNJF-3A
00-834-1376 3.203 2.750 00-288-1951 .511 .188
Fas Lg Grip Lg
DRILLED HEAD, 3 HOLES DOUBLE HEXAGON HEAD W/LONGITUDINAL 01-017-3650 2.833 2.187
HOLE
No. 10-32 UNF-3A 7/16-20 UNF-3A
Steel, Cadmium Plated. Marked with National
Fas Lg Grip Lg Aerospace Standard or Military Standard part Fas Lg Grip Lg
00-828-6167 .713 .375 number as indicated. Fastener and grip length 00-958-8611* 2.491 1.750
shown in inches. * UNF thread series
1/4-28 UNF-3A
5/16-24 UNF-3A 1/2-20 UNJF-3A
Fas Lg Grip Lg
00-814-7330 1.487 1.062 Fas Lg Grip Lg Fas Lg Grip Lg
00-819-2685 1.987 1.562 00-723-5394 1.322 .750 01-021-1864 3.225 2.437
00-543-4625 1.572 1.000
5/16-24 UNJF-3A DRILLED HEAD, 1 HOLE
3/8-24 UNF-3A
Fas Lg Grip Lg
Fas Lg Grip Lg 5/16-24 UNJF-3A
00-943-6646 1.844 1.375
00-680-6309 1.244 .635 Fas Lg Grip Lg
3/8-24 UNF-3A 00-900-5282 4.724 4.125
7/16-20 UNJF-3A
Fas Lg Grip Lg
Fas Lg Grip Lg 3/8-24 UNF-3A
00-816-2552 1.140 .562
00-687-7707 1.944 1.250 Fas Lg Grip Lg
7/16-20 UNF-3A 00-990-6916 .859 .250
1/2-20 UNF-3A
Fas Lg Grip Lg
Fas Lg Grip Lg DRILLED HEAD, 4 HOLES
00-063-7682 .844 .250
00-063-7683 .906 .312 00-816-3128 1.741 1.000
00-687-7711* 2.741 2.000 5/16-24 UNJF-3A
2-47
CLASS 5306
DRILLED HEAD, 3 HOLES. Titanium Alloy.
01-133-0168 1.099 .500 00-530-0327 2.803 2.438 No. 10-32 UNF-3A
3/8-24 UNF-3A HEXAGON HEAD Fas Lg Grip Lg

00-889-2867 .463 .125
Fas Lg Grip Lg Steel Cadmium Plated. Close tolerance aircraft
00-990-6917 .895 .250 bolts. Bolt marked with a dot within a triangle and 1/4-28 UNJF-3A
with National Aerospace Standard part number.
1/2-20 UNF-3A Fastener and grip length shown in inches. Fas Lg Grip Lg
00-917-2614 .613 .188
Fas Lg Grip Lg 00-223-1123 1.737 1.312
1/4-28 UNF-3A
00-990-7830 1.038 .250
Fas Lg Grip Lg DRILLED SHANK, 1 HOLE
Steel, Cadmium and Chromate Treated. 00-550-9281 .664 .312
Undrilled. Fastener and grip length shown in 00-207-8744 .852 .500 Steel.
inches.
5/16-24 UNF-3A 7/16-20 UNF-3A
3/8-24 UNJF-3A
Fas Lg Grip Lg 00-206-6402 .805 .438 00-045-1937 1.679 1.250
01-102-1863 2.383 1.625
7/16-20 UNF-3A DRILLED SHANK, 1 HOLE. Steel.
DOUBLE HEXAGON HEAD
Fas Lg Grip Lg
5/16-24 UNF-3A
Steel, Nickel Plated. 00-582-6393 1.422 1.000
Fas Lg Grip Lg
1/4-28 UNJF-3A DRILLED SHANK 00-782-9378* 2.054 1.687
* Magnetically Inspected
Fas Lg Grip Lg 1/4-28 UNF-3A Cadmium Plated
01-064-5458 .550 .250
Fas Lg Grip Lg
7/16-20 UNF-3A
DOUBLE HEXAGON HEAD W/HOLE 00-639-2258 1.031 .688
Fas Lg Grip Lg
Nickel Alloy. No. 10-32 UNJF-3A 00-144-6546* 6.220 5.720
* Cadmium Plated
Fas Lg Grip Lg
5/16-24 UNJF-3A 00-551-6985 .914 .562 1/2-20 UNF-3A
Fas Lg Grip Lg 00-616-2201 2.102 1.812
Fas Lg Grip Lg
00-143-3351 .950 .285
1/4-28 UNF-3A 00-782-9380* 2.179 1.750
00-115-9621 1.370 .710
* Magnetically Inspected
Fas Lg Grip Lg
Steel, Cadmium Plated. Cadmium Plated
00-637-0374 1.344 1.000
00-551-5593 2.039 1.688 SPLINE EXTENDED WASHER HEAD
9/16-18 UNJF-3A 00-639-1468 2.531 2.188
Fas Lg Grip Lg Cadmium Plated. Fastener and grip length
5/16-24 UNF-3A
00-126-5149 2.951 2.125 shown in inches. Top of bolt head painted Blue.
Fas Lg Grip Lg
3/4-16 UNF-3A 00-551-6982 1.679 1.312 1/2-20 UNJF-3A
Fas Lg Grip Lg Fast Lg Grip Lg

3/8-24 UNF-3A
00-045-1915 3.868 2.875 01-120-5115 2.678 1.750
Fas Lg Grip Lg
1-1/4-12 UNJF-3A 00-639-2315 1.109 .750 5/16-18 UNJF-3A
00-551-5662 1.179 .812 Fast Lg Grip Lg
Fas Lg Grip Lg 00-206-6376 1.297 .938
00-126-5151 6.087 4.500 00-551-5663 1.428 1.062 01-181-0802 4.025 3.000
00-551-5664 1.797 1.438
Steel, Nickel and Chromium Plated. 00-616-8748 1.938 1.500 BOLT, SHOULDER
00-576-5913 2.118 1.750
1-12 UNF-3A DOUBLE HEXAGON EXTENDED WASHER
9/16-18 UNF-3A HEAD, ROUND SHOULDER
Fas Lg Grip Lg
01-115-8562 8.500 7.000 Fas Lg Grip Lg Nickel Alloy. Fastener and thread length,
00-543-4755 6.196 5.688 shoulder diameter, and shoulder length given in
DOUBLE HEXAGON HEAD inches.
DRILLED HEAD, 3 HOLES
Steel, Cadmium Plated. Drilled shank, 1 hole. 1/4-28 UNJF-3A
No. 10-32 UNJF-3A
Fas Thd Shldr Shldr
5/16-24 UNJF-3A Fas Lg Grip Lg Lg Lg Dia Lg
00-812-2305 .838 .500 00-518-6287 .900 .610 .266 .295
2-48
CLASS 5306
5/16-24 UNJF-3A SQUARE HEAD, ROUND SHOULDER No. 6-32 UNC-2A
Fas Thd Shldr Shldr Steel. Undrilled. Bolt Lg Wing W
Lg Lg Dia Lg 00-195-4729 2.000 .750
00-518-6285 1.340 .915 .328 .425 00-195-4730 3.000 .766
No. 10-32 UNF-3A
DOUBLE HEXAGON HEAD WITH HOLE Fas Thd Shldr Shldr No. 10-24 UNC-2A
Lg Lg Dia Lg
Iron Alloy. Drilled head, 4 holes. Bolt Lg Wing W
00-993-2714 .632 .372 .247 .265 00-195-4732 3.000 1.500
1/4-28 UNS 00-193-4280 .757 .321 .247 .390 00-195-4733 4.000 1.500
00-426-2690 2.065 .438 .250 .506
Fas Thd Shldr Shldr 1/4-20 UNC-2A
Lg Lg Dia Lg UNDERCUT HEXAGON HEAD, ROUND
01-138-6288 .845 .510 .251 .335 Bolt Lg Wing W
SHOULDER
00-209-3809 4.000 1.750
HEXAGON HEAD, ROUND SHOULDER Steel, Passivated, undrilled.
3/8-16 UNC-2A
Steel. Drilled head, 3 holes. 5/16-18 UNF-3A Bolt Lg Wing W
Drilled shank. Fas Thd Shldr Shldr 00-195-4747 6.000 2.266
Lg Lg Dia Lg
3/8-24 UNJF-3A 01-215-3775 1.640 .505 .624 1.025 ROD, CONTINUOUS THREAD
Fas Thd Shldr Shldr BOLT, SQUARE NECK CONTINUOUS THREADED ROD. Rod length
Lg Lg Dia Lg
shown in inches. For: Stud, Continuous Thread,
01-028-2447 1.914 .578 .499 .435 BUTTON HEAD See Class 5307.
Steel, Cadmium Plated. Undrilled. Steel, Cadmium or Zinc Plated. Bolt and thread
length shown in inches.
1/4-28 UNF-3A
Fas Thd Shldr Shldr
Lg Lg Dia Lg Steel, Composition. High Temperature service.
00-991-6416 .845 .440 .284 .405
3/8-16 UNC-2A
00-689-8193 1.190 .532 .310 .653
Bolt Lg
1/2-20 UNF-3A 1/4-20 UNC-2A
00-903-3535 120
Fas Thd Shldr Shldr Fas Lg Grip Lg
Lg Lg Dia Lg 00-108-9988 1.500 .766 5/8-11 UNC-2A
00-639-1465 4.000 .672 .623 3.188 00-145-0875 4.250 .766
Bolt Lg
Drilled shank. 3/8-16 UNC-2A 00-903-3538 120
Fas Lg Grip Lg 1/2-13 UNC-2A

1/4-28 UNF-3A
00-702-4484 2.500 1.016
Fas Thd Shldr Shldr 00-993-6257 3.000 1.016 Bolt Lg
Lg Lg Dia Lg 00-951-5699 4.000 1.016 00-903-3537 120
00-969-9225 2.374 .437 .311 1.937 00-067-8511 5.000 1.016
00-260-7515 7.000 1.266 3/4-10 UNC-2A
ROUND HEAD WITH WRENCH FLATS, 00-071-1228 8.000 1.266
Bolt Lg
ROUND SHOULDER
1/2-13 UNC-2A 00-913-6128 36
Steel, Chromium Plated.
Thd 1-8 UNC-2A
Size Fas Lg Thd Lg
Drilled shank. Bolt Lg
00-848-7045 3.000 1.266 131
00-903-3541 120
5/16-24 UNF-3A
BOLT, TOGGLE
Fas Thd Shldr Shldr NON SPEC ITEMS. Steel.
Lg Lg Dia Lg SPRING-WING TOGGLE BOLT
00-173-7617 1.500 .359 .436 1.150 5/16-18 UNC-2A
Steel, Cadmium or Zinc Plated. Round head, slot
ROUND HEAD WITH WRENCH FLATS Bolt Lg
drive. Bolt length and wing width shown in
CHAMFERED, ROUND SHOULDER inches. 00-424-8923 36
Steel. Undrilled. 3/8-16 UNC-2A

Bolt Lg
7/16-20 UNF-3A
00-819-6449 48
Fas Thd Shldr Shldr
Lg Lg Dia Lg 1/2-13 UNC-2A
00-980-1542 3.320 .781 .449 1.590
2-49
CLASS 5306
Bolt Lg
00-174-1937 30
Steel, Corrosion Resisting.
1/4-20 UNC-2A
Bolt Lg
00-574-1024 36.120
2-50
Phone (215) 737-2336
DSN 444-2336
CLASS 5307
STUDS
NOTE: As non-plastic alternatives to plastic items currently in use are identified, information will be through shopping advisory messages
and the Afloat Shopping Guide. To help you shop more wisely, items recommended for shipboard use will be annotated with NP
by the National Item Identification Number.
STUD, BALL STANDOFF, THREADED, SPACING

Lg
Continuous threaded studs. Thread series, class 00-637-6522 3 A Unified National Coarse or Fine internally and
of fit and length shown in inches. 00-637-6474 3-9/16 externally threaded stud, used to extend the
00-637-6466 4 reach of an externally threaded item. Thread
00-637-6479 4-1/2
Steel, Cadmium Plated size, series, class of fit, stud diameter shown in
00-637-6480 5
inches. External threads listed. Internal threads
00-637-6481 5-1/2
No. 6-32 UNC-2A 00-637-6482 6 are class 2A fit.
00-637-6483 7
Lg Aluminum Alloy
01-044-2385 43/64 3/4-10 UNC-2A
5/16-18 UNC-2B
Steel, Comp Lg
00-637-6491 3-9/16 Dia Lg
5/8-18 UNF-3A 00-637-6492 4-1/16 00-638-0084 1/2 1-15/16
00-637-6494 4-1/2
Lg 00-637-6493 5 Steel
00-447-5205 3-5/64 00-637-6496 5-1/2
00-637-6495 6 1/4-20 UNC-2B
STUD, CONTINUOUS THREAD 00-637-6498 6-1/2
00-637-6499 8 Dia Lg
For: Rod, Continuous Thread, See Class 5306. 00-272-6544 1/2 1-1/2
7/8-9 UNC-2A
Continuous threaded Unified National Coarse Steel Comp
Lg
studs. Thread series, class of fit and length 00-637-6485 4-1/2
shown in inches. 5/16-18 UNC-2B
00-637-6486 5
00-637-6476 5-1/2 Dia Lg
HIGH TEMPERATURE SERVICE. Chromium- 00-637-6475 6 00-272-6545 9/16 1-3/4
Molybdenum-Vanadium Alloy Steel. 00-637-6478 7
3/8-16 UNC-2B
Steel Comp 1-8 UNC-2A
Dia Lg
3/8-16 UNC-2A Lg 00-363-8059 15/32 4-5/16
00-136-2942 4-1/2 00-282-9526 5/8 1-3/4
Lg 00-637-6501 5
00-260-2937 3-1/4 00-637-6502 5-1/2 Steel Comp, Phosphate Manganese Coated.
00-637-6504 6 Nut end chamfered, .031 inch by 45 degrees.
7/16-14 UNC-2A 00-637-6503 6-1/2
00-637-6505 7
Lg No. 10-24 UNC-3A x No. 10-18 UNC-3B
00-637-6507 8
00-637-6461 1-9/16 Dia Lg
00-637-6510 2-1/2 1-1/8-8 UNC-2A 00-206-7632 1/2 2-1/4
00-637-6462 3
00-637-6463 3-1/2 Lg
1/4-20 UNC-3A x 5/16-18 UNC-3B
00-582-6738 5 00-637-6512 7
00-637-6513 8 Dia Lg
1/2-13 UNC-2A 00-206-7626 1/2 2-1/4
1-1/4-8 UNC- 2A
Lg
00-637-6464 2 Lg STUD, PLAIN
00-637-6465 2-1/2 00-637-6520 8
00-637-6467 3 00-637-6521 9 Plain stud with American Standard and Unified
00-637-6468 3-1/2 National Coarse or Fine threads on both ends.
00-637-6469 4 1-1/2-8 UNC 2A Right-Hand thread. Thread size, series, class of
00-637-6470 4-1/2 fit and length in inches listed below. Nut end and
00-637-6471 5 Lg stud end listed respectively.
00-637-6472 5-1/2 00-823-8815 10-1/4
00-637-6473 6 Copper Alloy
5/8-11 UNC-2A 1/4-20 UNC-2A x 1/4-20 UNC-5A
2-51
CLASS 5307
Lg Lg Lg
00-248-7844 2 00-248-7486 2-3/4 00-105-3297 6-15/16
5/16-18 UNC-2A x 5/16-18 UNC-3A 3/8-16 UNC-3A x 3/8-16 UNC-5A Steel

Lg Lg 1/4-20 UNC-2A x 1/4-20 UNC-5A
00-550-1558 2-7/8 00-248-7441 1-1/4
00-248-7487 1-1/2 Lg
5/16-18 UNC-2A x 5/16-18 UNC-5A 00-248-7488 1-3/4 00-248-8297 4
00-248-7489 2
Lg 00-248-7491 2-1/2 5/16-18 UNC-2A x 5/16-18 UNC-3A
00-248-7845 1-1/2 00-248-7493 3
Lg
5/16-18 UNC-3A x 5/16-18 UNC-3A 3/8-24 UNF-2A x 3/8-24 UNF-3A 00-174-4355 1-7/32
Lg Lg
3/8 - 16 UNC-2A x 3/8 - 16 UNC-5A
00-206-1459 1-1/16 01-074-2151 2-1/4
Lg
3/8-16 UNC-2A x 3/8-16 UNC-5A 7/16-14 UNC-3A x 7/16-14 UNC-5A 00-248-8290 1-1/2
Lg Lg
3/8 - 24 UNF-2A x 3/8 - 16 UNC-3A
00-248-7846 1-1/2 00-248-7501 2
00-248-7849 2 Lg
00-248-7850 2-1/2 1/2-13 UNC-3A x 1/2-13 UNC-5A 00-273-9380 1-11/16
00-248-7851 3
00-248-7852 4 Lg
7/16 - 20 UNF-2A x 7/16 - 14 UNC-3A
00-248-7446 1-1/2
7/16-14 UNC-2A x 7/16-14 UNC- 5A 00-248-7447 1-3/4 Lg
00-248-7448 2 00-550-1879* 1-15/16
Lg 00-248-7511 2-1/4 * Steel Comp
00-248-7856 2-1/2 00-248-7512 2-1/2
00-248-7513 2-3/4 1/2 - 13 UNC-2A x 1/2 - 13 UNC-5A
1/2-13 UNC-2A x 1/2-13 UNC-5A 00-248-7514 3
00-248-7518 4 Lg
Lg 00-248-7953 2
00-248-7861 3 5/8-11 UNC-3A x 5/8-11 UNC-5A
00-254-0802 4-1/4 5/8 - 11 UNC-2A x 5/8 - 11 UNC-5A
Lg
5/8-11 UNC-2A x 5/8-11 UNC-5A 00-248-7963 2-1/4 Lg
00-248-7964 2-1/2 00-248-8268 2-1/2
Lg 00-248-7965 2-3/4
00-246-9677 2 00-248-7966 3
00-248-7864 2-1/2 00-248-7968 3-1/2 STUD, SHOULDERED
00-248-7867 3
00-248-7870 3-1/2 3/4-10 UNC-3A x 3/4-10 UNC-5A Steel Comp
00-248-7871 4
00-248-7872 5 Lg No. 10-32 UNF-2A x No. 10-32 UNF-2A
00-248-7976 2-3/4
5/8-11 UNC-3A x 5/8-11 UNC-5A 00-248-7977 3 Lg
01-015-5831 3/4
Lg Steel 01-231-3912 2-21/64
00-248-7451 2 01-283-2460 5-3/4
3/8-24 UNF-3A x 3/8-16 UNC-5A
3/4-10 UNC-2A x 3/4-10 UNC-5A STUD, WELDING
Lg
Lg 00-638-0074 1-5/16 Steel Welding Studs. Unified National coarse or
00-246-9679 2-1/2 00-174-4764 2-7/16 fine threads. Thread size, series, class of fit and
00-248-7873 3 length in inches shown below.
00-248-7874 3-1/2 1/2-13 UNC-2A x 1/2-13 UNC-5A
00-248-7876 4
Lg HEADED STUD. Head height 3/8.
Nickel Alloy 00-248-7950 1-1/2
Steel Comp
1/4-20 UNC-3A x 1/4-20 UNC-5A Steel Comp Thd/Size Thd/Lg
00-355-4873 1/4-20 UNC-2A 7/16
Lg 7/16 - 20 UNF-3A x 7/16 - 20 UNC-2A 01-297-4107 1/2
00-248-7473 2 00-355-4874 5/16-18 UNC-2A 11/16
Lg 00-355-4875 3/8-16 UNC-2A 11/16
5/16-18 UNC-3A x 5/16-18 UNC-5A 00-359-1250 2-1/16 01-294-4356 3/4
01-278-9668 61/64
Lg Steel, Corrosion Resisting, Passivated.
00-248-7481 1-1/2 HEADLESS STUD. Furnished with a heat shield
00-248-7483 2 3/8-16 UNC-2A x 3/8-24 UNF-2A and flux.
2-52
CLASS 5307
Steel
Thd/Size Thd/Lg
00-265-9152 3/8-16 UNC-2A 2.125
SHOULDERED STUD. Thread size, series,

class of fit, overall length, and diameter of
shoulder listed. Unthreaded end diameter .330
inches. Heat shield and flux furnished.
Aluminum Alloy
Shldr
Thd Lg Dia Lg
01-025-1819 .500 .625 2.234
01-026-3185 .625 .625 1.203
01-026-3184 .625 .625 1.719
01-025-4463 .625 .625 2.734
Steel
3/8-16-UNC-2A
Shldr
Thd Lg Dia Lg
01-293-1818 .579 1.000
01-014-1256 .625 .656 1.375
01-265-0519 .625 .656 1.500
00-531-1053 .750 .656 1.688
00-531-1055* .750 .625 1.812
00-531-1056* .750 .625 1.938
01-225-7813 .750 .656 1.750
01-294-3149 .829 1.750
01-270-7374 .859 .656 1.750
* With ferrule
2-53
2-54
Phone (215) 737-2336
DSN 444-2336
CLASS 5310
NUTS AND WASHERS
NUT, CONNECTOR 01-160-6842
Carbon Steel Grade 1020, Cadmium Plated. Steel Composition, Passivated.

1-1/8 inches width across flats. 9/16 inch thick
25/64 inch diameter bore. 7/8-16-NS-3 thread. Smooth round shank with flat countersunk
reverse keyed head. Open shank. Nut .248 inch
00-367-1456 diameter by .625 inch length. Grip range .141 Steel, Cadmium Plated.
inch long and .391 inch diameter head. 100
NUT, EYE degree countersunk angle and .065 inch length Size H
key and .065 inch height head. 00-167-1284 No. 10-32 1/4
Steel Composition 316 CRES. Right hand 00-717-5570 No.10-32 UNF-3B 00-167-1285 1/4-28 9/32
thread. Temperature requirements not rated. 00-167-1286 5/16-24 21/64
Overall height, width and hole width shown in 00-582-6058 3/8-24 13/32
inches below.
NUT, PLAIN, CAP 00-167-1288 7/16-20 29/64
00-167-1289 1/2-20 9/16
GENERAL PURPOSE CAP NUTS. CRES Steel, 00-167-1290 9/16-18 39/64
A329 EYE STYLE. 1/2-13-UNC 2b. Passivated. Hexagon drive, chamfered or 00-582-6055 5/8-18 23/32
H W Hole W washer faced, Right hand Thread size and nut 00-167-1292 3/4-16 13/16
height and width across flats (WAF) listed. 00-143-6020 1-12 1
01-391-2360 1.250 2.000 1.250
00-167-1294 1-14 1
A325 EYE STYLE. 5/8-11 UNC 2b.
Steel, Passivated.
H W Hole W
Size H
01-388-8573 3.750 2.500 1.500
00-167-1279 No. 10-32 1/4
00-167-1280 1/4-28 9/32
NUT, PLAIN, ASSEMBLED Steel Composition, Passivated.
00-167-1281 5/16-24 21/64
WASHER Thd H WAF 00-268-7313 1/2-20 9/16
00-199-7639 1/4-20 UNC-2B .470 .433 00-268-7292* 5/8-18 23/32
CRES nut, Cadmium Plated CRES washer, 01-391-2361 3/8-16 UNC-2B .625 .562 00-268-7295 1-14 1
passivated. Flat, with turned back edge nut style. 00-199-7643 1/2-20 UNC-2B .810 .743 * CRES
Overall .385 inch height, with .545 inch OD
washer. .450 degrees Fahrenheit temperature NON-SPEC TYPES GENERAL PURPOSE CASTLE NUTS. Thread
rating. 1/4-28 UNJF-2B. Right hand threads. size and nut height listed.
Copper Alloy.
00-126-5753 Unfinished or washer faced
Thd H WAF
01-030-9217 3/8-24 UNF-2B .250 .562 Aluminum Alloy.
NUT, PLAIN, BLIND RIVET 00-967-4748 1/2-20 UNF 2B .953 .828
Size H
Aluminum Alloy CRES 00-107-1600 3/8-24 UNF-2B 21/32
Smooth round shank with flat head. Open shank. Thd H WAF Washer Faced
Nut .219 inch diameter by .656 inch length with 00-456-2633* 1/2-12 UNS-2B .838 .817
.430 inch long grip range and .344 inch diameter 00-066-2196 7/8-9 UNC-2B 1.500 1.312 Steel.
by .062 inch height head. * With locking device attached to bearing
surface Size H
00-076-0377 No. 8-36 UNF-2B
00-221-4698 1/2-20 UNF-2B 9/16
Steel.
Anodized. Smooth round shank with flat keyed
head. Open shank. Nut .250 inch diameter by Thd H WAF NUT, PLAIN, EXTENDED WASHER,
.438 inch length with .045 inch long grip range, 00-257-6177 9/16-18 UNF-2B .620 .690 DOUBLE HEXAGON
and .387 inch diameter by .032 inch height head. 01-196-3247* 7/8-9 UNC-2B 1.438 1.312
* Washer faced bearing surface Iron Alloy. Silver Coated.
00-550-4725 No. 10-32 UNF 2B
Cadmium and Chromate. NUT, PLAIN, CASTELLATED, 35-42 Rockwell hardness rating. Washer .322
HEXAGON inch Outside Diameter by .030 inch thick and
Thread size .375 inch right-hand. Blind rivet with .247 inch width across flats.
smooth round shank. Nut .488 inch diameter by AIRFRAME CASTLE NUTS. Chamfered or Thd H
1.125 inch length. Grip range .296 to .381 inch washer faced. UNF-3B thread. Thread size and
flat countersunk. nut height shown below. 00-118-5737 .254
2-55
CLASS 5310
Steel Composition.
Thd Size H Thd Size H
Washer .100 inch thick. 19 to 26 Rockwell 00-282-7823 7/16-20 UNF-3B 17/64 00-880-7746 5/16-24 17/64
hardness rating. Dyed Blue. 00-732-0559 3/8-24 21/64
NOTE: Selected Black Oxide Coated Brass 00-880-7745 7/16-20 3/8
Thd H Threaded Fasteners (BOCBTF) are 00-732-0560 1/2-20 7/16
00-854-0367 7/16-20 UNS .500 not authorized for Navy use. Main 00-763-8911 9/16-18 31/64
00-763-8905 5/8-18 35/64
and auxiliary steam and catapult 00-763-8901 3/4-16 41/64
NUT, PLAIN, EXTENDED WASHER, steam systems with a design
HEXAGON temperature above 775 degrees Steel, Cadmium overall. Non Spec.
Fahrenheit require Level 1 support.
Iron Alloy, passivated. Washer .500 inch Thd Size H
Use NAVSEA Level 1 Catalog
diameter by .040 inch thick, and .312 inch width 0948-LP-103-6010 to identify Level 1 00-817-9056 No. 2-56 UNJC-3B 1/16
across flats. 800 degrees Fahrenheit
fasteners, valves, and piece parts.
temperature rating. Steel Composition, Cadmium with Chromate
For other steam systems fastener Plating.
Thd H requirements, consult Mil Std-777.
00-058-6428 1/4-28 UNF-3B .245 Naval Ships Technical Manual Thd Size H
0901-LP-075-0000 00-188-7888 3/8-16 UNC-2B 21/64
Steel, Cadmium Plated. Washer .440 inch (S9086-CJ-STM-002), Chapter 075,
diameter by .050 inch thick and .309 inch width provides additional information on Steel Composition, Cadmium and Chromate
across flats. the proper identification and use of overall (with 3 drilled holes).
threaded fasteners. Thd Size H
Thd H
00-891-6498 1/4-28 UNF 3B .328 00-208-3755 5/16-24 UNJF-3B 7/32
Nickel Alloy. 00-298-9255 3/4-16 UNJF-3B 15/32
NUT, PLAIN, HEXAGON Thd Size H
Steel Composition, Passivated, Non Spec.
00-272-5696 1/4-20 UNC-2B 13/64
AIRFRAME HEXAGON NUTS. Chamfered or 00-264-3552 5/16-18 UNC-2B 13/64 Thd Size H
washer faced. UNF-3B thread. Thread size and 00-272-5697 5/16-18 UNC-2B 1/4 00-616-8660 No.6-32 UNJC-3B 3/32
nut height listed. 00-297-8833 3/8-16 UNC-3B 15/64
00-272-5698 3/8-16 UNC-2B 5/16 Steel Composition, Passivated.
00-676-8265* 7/16-14 UNC-2B 23/64
00-272-5700 1/2-13 UNC-2B 7/16 Thd Size H
00-582-6494 5/8-11 UNC-3B 3/8 00-903-5966 1/4-20 UNC-2B 7/32
00-272-5701 5/8-11 UNC-2B 17/32 00-767-0445 5/16-18 UNC-2B 17/64
00-917-4713 5/8-11 UNC-2B 35/64 01-429-2038 3/8-16 UNC-2B 21/64
00-272-5702 3/4-10 UNC-2B 41/64 00-913-8881 3/8-16 UNC-2B 21/64
00-272-5703 7/8-9 UNC-2B 3/4 00-965-1800 7/16-14 UNC-2B 3/8
Aluminum Alloy, Anodized. 00-272-5704 1-8 UNC-2B 55/64 00-764-6583 9/16-12 UNC-2B 31/64
Size H 00-272-5705 1-1/8-7 UNC-2B 31/32 00-768-0321 1/2-13 UNC-2B 7/16
* Non-spec item. 00-764-6609 5/8-11 UNC-2B 35/64
00-167-1320 1/4-28 3/16
00-924-5897 3/4-10 UNC-2B 41/64
Steel, Cadmium Plated. UNC-2B thread. Brinell 00-764-6610 7/8-9 UNC-2B 3/4
Steel, Cadmium Plated. hardness rating 121 Minimum.
Size H Steel Composition, Passivated, Non Spec 2.
Thd Size H
00-167-1342 No. 6-40 7/64 00-194-8195* No.4-40 3/32 Thd Size H
00-167-1343 No. 10-32 9/64 00-880-7744 5/16-18 17/64 00-199-3155 1-8 UNC-2B 55/64
00-167-1344 1/4-28 3/16 00-732-0558 3/8-16 21/64
00-167-1345 5/16-24 15/64 00-761-6882 1/4-20 7/32 Steel, CRES, Passivated.
00-167-1346 3/8-24 9/32 00-880-8189 7/16-14 3/8
00-298-9267 1/2-20 3/8 00-768-0318 1/2-13 7/16 Thd Size H
00-268-6054 5/8-18 5/16 00-761-3706 1/2-13 7/16 00-260-7924 3/8-16 UNC-2B 5/16
00-763-8913 9/16-12 31/64
Steel Composition, Passivated. 00-763-8920 5/8-11 35/64 Steel.
00-915-4891 5/8-11 35/64
Size H
00-763-8921 3/4-10 41/64 Rockwell hardness rating 33 nominal.
00-268-6022 No. 10-32 9/64 00-763-8922** 3/4-10 41/64
00-262-5516 3/8-24 9/32 00-880-8186 7/8-9 3/4 Thd Size H
00-762-6248 1-8 55/64 00-270-7111 5/16-24 UNF-3B 1/4
GENERAL PURPOSE REGULAR HEXAGON 00-762-6242 1-1/8-7 31/32 00-275-9333* 3/8-16 UNC-3B 5/32
NUTS. Chamfered or washer faced. Thread size 00-762-6241 1-1/4-7 1-1/16 * Rockwell hardness rating 23 nominal.
and nut height listed. * Non-spec item
Cadmium and Chromate overall Steel, Brinell hardness rating 121 nominal.
Aluminum Alloy, UNC-2B. Brinell hardness rating 163
Rockwell hardness rating 95. Thd Size H
Size H ** Rockwell rating, 78 00-723-4458 1/4-20 UNC-2B 7/32
00-584-8002 1/4-20 7/32 00-655-9544* 3/8-16 UNC-2B 21/64
00-584-8003 5/16-18 17/64 Steel, Cadmium Plated. UNF-2B thread. 00-817-9966 1-8 UNC-2B 7/8
00-415-2186 3/8-16 21/64 * Rockwell hardness rating 69.
Thd Size H
Aluminum Alloy, Anodized. 00-768-0319 1/4-28 7/32 HEAVY DUTY HEXAGON NUTS. Designed for
2-56
CLASS 5310
greater strength and heavy loads. Used for
applications at normal atmospheric Thd Size H Thd Size H
temperatures. Chamfered or washer faced. 00-851-2682 3/8-16 UNC-2B 7/32 00-934-9746 No.4-40 3/32
Thread size, nut height and dash number listed. 00-975-2075 3/8-24 UNF-2B 7/32 01-236-1685 No.6-32 7/64
00-934-9762 No.8-32 1/8
Copper Alloy. Steel Composition, Passivated. 00-934-9764 No.10-24 1/8
Thd Size H Thd Size H Steel, Cadmium and Chromate or Phosphate

00-297-8920 3/8-16 UNC-3B 23/64 00-989-0908 1/4-20 UNC-2B 5/32 treated.
00-903-3992 3/8-24 UNF-2B 11/32 00-989-5953 5/16-18 UNC-2B 3/16
00-928-9510 9/16-12 UNC-2B 31/64 00-849-6895 5/16-24 UNF-2B 3/16 Thd Size H
00-989-5956 3/8-16 UNF-2B 7/32 00-934-9738 No.2-56 1/16
Steel, Cadmium Plated. Brinell hardness rating 00-989-5945 1/2-13 UNC-2B 5/16 00-934-9739 No.4-40 3/32
103. 00-934-9724 5/8-11 UNC-2B 3/8 00-934-9747 No.6-32 7/64
00-934-9727 3/4-10 UNC-2B 27/64 00-934-9757 No.8-32 1/8
Thd Size H 00-891-3461 7/8-9 UNC-2B 31/64 00-934-9758 No.10-24 1/8
00-616-2793 1/2-13 UNC-3B 31/64 01-389-8001* 1/8-32 7/64
Steel Composition, Passivated. 01-389-7642* 5/32-32 1/8
Steel Composition. 00-997-1888 1/4-20 3/16
Thd Size H 00-829-9981 5/16-18 7/32
Thd Size H 00-199-3144 1/4-20 UNC-3B 7/32 00-056-3395 3/8-16 1/4
00-264-0300 5/16-24 UNF-3B 1/2 * Steel composition 316.
CRES Steel Composition 316. UNC-2B with
HEXAGON JAM NUTS, AIRCRAFT TYPE. right hand thread. A12 hexagon style with a Steel Composition, Passivated. UNC-2B
Chamfered face. washer faced bearing surface. Hardness rating threads.
of 95 Rockwell minimum. Temperature
resistment not rated. Nut thread size, height, and Thd Size H
Steel, Cadmium Plated. 00-938-2013 No.2-56 1/16
width shown in inches below.
Thd Size H 00-934-9748 No.4-40 3/32
Thd Sz H W 00-934-9761 No.6-32 7/64
00-208-7589 1/4-28 UNF-3B 1/8
01-372-2667 1/4-20 15/64 .432 00-934-9759 No.8-32 1/8
00-596-8422 5/16-24 UNF-3B 5/32
01-372-3940 5/16-18 17/64 .495 00-934-9760 No.10-24 1/8
00-268-6056* 5/16-24 UNF-3B 5/32
01-372-2669 5/16-18 17/64 .495 00-250-9477 1/4-20 3/16
00-167-1300 3/8-24 UNF-3B 3/16
01-372-2672 7/16-14 3/8 .680 00-245-3615 5/16-18 7/32
00-167-1302 7/16-20 UNF-3B 7/32
01-372-2666 1/2-13 7/16 .743 00-477-6768 3/8-16 1/4
00-167-1304 1/2-20 UNF-3B 1/4
* Left hand thread. 01-372-2673 5/8-11 3/8 .930
01-372-2670 5/8-11 35/64 .930 Copper Alloy, Oxide finish. UNF-2B threads.
Steel, Cadmium and Chromate Plating, with 3 Thd Size H
drilled holes. Steel, Chamfered.
00-934-9766 No.10-32 1/8
00-199-3119 9/16-12 UNC-2B 31/64 Steel, Cadmium treated, Chamfered, with
00-141-3010 1/4-28 UNJF-3B 3/16
00-199-3120 5/8-11 UNC-2B 35/64 UNF-2B threads.
00-208-6740 3/8-24 UNJF-3B 1/4
HIGH TEMPERATURE REGULAR HEXAGON Thd Size H
Steel, CRES. 00-934-9751 No.10-32 1/8
Thd Size H Steel, Chamfered or washer faced. Nut marked 00-043-0520* 1/4-28 3/16
with symbol H. * Cadmium and Chromate Plated.
00-282-4777 1/4-28 UNF-3B 1/8
00-268-6057 5/16-24 UNF-3B 5/32
Thd Size H Steel Composition, Passivated. UNF-2B
00-268-6068 1/2-20 UNF-3B 1/4
00-199-3114 1/4-20 UNC-2B 7/32 threads.
HEXAGON JAM NUTS, GENERAL PURPOSE Thd Size H
TYPE. Chamfered or washer faced. Steel Carbon-Molybdenum Alloy. Nut marked
with symbol 4. For 1000 degrees Fahrenheit 00-934-9765 No.10-32 1/8
01-389-7982* 3/16-32 1/8
Copper Alloy. service in high temperature piping systems.
00-400-5503 1/4-28 3/16
Thd Size H * CRES
Thd Size H
00-189-8467 1/2-13 UNC-3B 5/16 00-840-5872 5/8-11 UNC-2B 5/8
00-637-3627 7/16-24 UNC-2B 3/8 Iron Alloy, Silver Plated. UNJF-3B threads. 2
00-297-8822 1/2-13 UNC-3B 31/64 drilled holes.
00-637-3628 1/2-13 UNC-2B 7/16
Steel. 00-637-3634 5/8-11 UNC-2B 35/64
Thd Size H
00-637-3631 3/4-10 UNC-2B 41/64
00-010-3091 6-32 UNC-2B 7/64 00-637-3632 7/8-9 UNC-2B 3/4 00-943-5308 1/4-28 7/32
00-637-3629 1-8 UNC-2B 55/64
Steel Composition, Passivated. 00-637-3630 1-1/8-8 UN 31/32 Iron Alloy. UNJF-3B threads.
00-637-3625 1-1/4-8 UN 1-5/64
00-905-1691 1/4-28 UNF-2B 7/32 MACHINE SCREW Hexagon nuts, GENERAL 00-496-8922 3/8-24 21/64
00-903-1524 3/8-24 UNF-2B 21/64 PURPOSE TYPE. Chamfered or washer faced
00-924-8210 1/2-20 UNF-2B 7/16 with UNC-2B threads. TUBE, BULKHEAD, and UNIVERSAL FITTING
HEXAGON LOCK NUTS. Chamfered. Used with
Steel, Chromate and Cadmium treated. Copper Alloy. fluid connection fittings.
Aluminum Alloy, Anodized.
2-57
CLASS 5310
Thd Size H Thd Size H Thd
00-159-6339 7/16-20 UNF-3B 1/4 00-297-4126* No.6-32 UNC-3B 5/64 00-185-6345 2.360-18
00-638-2605 9/16-18 UNF-3B 17/64 * Flat 00-185-6346 2.548-18
00-282-7835 3/4-16 UNF-3B 5/16 00-185-6343
00-282-7834 7/8-14 UNF-3B 23/64 Steel, Passivated. Chamfered. * UNEF-2B
00-199-1028 1-1/16-12 UN-3B 13/32
00-949-6143 1-5/16-12 UN-3B 13/32 Thd Size H COMMERCIAL TYPES, NON-SPEC ITEMS
00-208-4135 1-5/8-12 UN-3B 13/32 00-812-4294* No.2-56 UNC-2B 1/16
00-208-3786 No.4-40 UNJC-3B 1/16 Copper Alloy.
Steel Composition, Cadmium treated. 00-220-6634* No.6-32 UNC-3B 7/64
00-827-9138 No.8-32 UNC-2B 3/32 1/16 inch drive point width 2 drive points.
Thd Size H 00-905-7292* No.10-32 UNF-3B 1/8
00-208-5769 7/16-20 UNF-3B 1/4 * Chamfer or Washer Thd Size
With 2 holes 00-207-8299 No.6-32 UNC-2B
Steel Composition, Passivated.
Steel Composition, Zinc treated. Washer faced. 1/16 inch diameter holes, 4 drive points.
Thd Size H
00-079-1967 7/16-20 UNF-3B 1/4 Thd Size H Thd Size
00-264-1321 3/8-16 UNC-2B 17/32 00-735-4548 5/8-18 UNF-2B
CRES
Thd Size H NUT, PLAIN, KNURLED Unslotted.
00-208-5233* 1/2-13 UNC-2B 11/16 Thd Size WAF
Steel Composition, Cadmium treated.
* Flat 00-873-5012 3/4-16 UNF-2B 1.500
No.10-32 UNJF-3B
Nickel Alloy, Chamfered. Steel, Cadmium Plated.
Dia Thk
Thd Size H
00-703-8309 21/64 5/16 1/16 inch drive point width, 2 drive points.
01-126-9148* 3/8-16 UNC-2B 21/64
01-021-9180 7/8-14 UNF-3B 33/64 Thd Size
* Flat or washer faced with 3 drilled 1/4-28 UNJF-3B
holes. 99-454-0560 No.10-32 UNF-2B
Dia Thk
Steel, Chamfered. 00-691-0911 3/8 23/64 Steel.
Thd Size H 2-3/8 UNC-2B 1/8 inch drive point width, 4 drive points.
00-208-8718* No.10-32 UNF-3B 3/32 Dia Thk Thd Size
00-275-5609* No.10-32 UNF-3B 5/32
00-023-2397* 3/8-16 UNC-2B 21/64 00-672-5944 4-1/8 3/4 00-185-6484 21/32-32 UNS
00-841-5700 7/16-20 UNF-2B 7/16 00-208-4305 1-1/8-12 UNF-3B
00-199-3118* 1/2-13 UNC-2B 7/16 NUT, PLAIN, RECTANGULAR
01-092-5007 5/8-11 UNC-2B 35/64 5/16 inch drive point width, 4 drive points.
01-097-7966 7/8-9 UNC-2B 1/2 Steel, CRES, Silver surface treatment. Number
00-975-1574 1-1/4-12 UNF-3B 17/32 Thd Size
10-32 UNJF-3B thread size. 90 degree
* Washer faced countersunk angle. Chamfered 45 degree by 00-540-4155 1-5/8-12 UNF-3B
035 inches deep along length on both sides. Non
Steel, Cadmium treated. Chamfered. Spec Item. 1/4 inch drive point diameter 2 drive points.
Thd Size H Lg W H Thd Size

00-297-8829* 3/8-24 UNF-3B 17/32 00-182-5806 .430 .363 .214 00-420-1080 1/2-13 UNC-3B
00-497-3221 3/8-32 UNEF-2B 1/16 00-702-0495 3/4-10 UNC-2B
00-781-4844 5/8-18 UNF-2B 3/8 00-550-0816 3/4-16 UNF-3B
NUT, PLAIN, ROUND 00-208-3359 39/64-20 UNS
00-208-6797 5/8-18 UNJF-3B 13/32
3 Holes 00-420-1765* 1-16 UN-3B
BALL AND ROLLER BEARING RETAINING * 2 drilled holes
* Washer
NUTS. Regular series. UNS thread. Steel
Chamfered or Washer
Composition. Four equally spaced slots are
Steel Composition.
intended for use with key washers.
Steel, Cadmium and Chromate treated.
Chamfered, with 3 drilled holes .070 inch 1/4 inch drive point diameter 4 drive points.
3/16 inch drive point width.
diameter.
Thd Size
Thd
Thd Size H 00-638-1124 1-3/8-12 UNF-3B
00-185-6425 041
00-543-5041 1/2-20 UNF-3B 5/16 00-185-6426 .969-32
00-208-5775* 3/4-16 UNF-3B 5/16 00-185-6463 1.173-18 Steel Composition, Phosphate treated.
* AN Std AN924-8 00-185-6464 1.376-18
1/4 inch drive point width, 8 drive points.
Steel, Cadmium or Zinc treated. Chamfered. 1/4 inch drive point width.
Thd Size
Thd Size H Thd 00-685-2767 2-3/4-18 UNS
00-576-1316 1/2-20 UNF-3B 47/64 00-185-6389* 1.563-18
00-185-6461 1.767-18 Steel, Corrosion Resisting.
Steel, Chromate Zinc treated. 00-185-6462 1.967-18
00-185-6460 2.157-18 17/64 inch drive point diameter 2 drive points.
2-58
CLASS 5310
NUT, PLAIN, WING NUT, SELF-LOCKING,
Thd Size
ASSEMBLED WASHER
00-835-4473 1/2-13 UNC-3B GENERAL PURPOSE WING NUTS. Drilled hole
in one wing. Thread size, nut height, width. Iron Alloy.
NUT, PLAIN, SINGLE BALL SEAT,
HEXAGON Thd Size H
00-500-3523* 3/4-16 UNJF-3B 29/32
Copper Alloy. Ball seat radius 3/16 inch Nut * Silver Coated Threads.
height 13/16 inch Width across flats 1-5/16 inch.
Steel, Cadmium treated.
Thd Size H
Copper Alloy, UNC-2B thread.
00-150-4154 3/8-24 UNJF-3B 33/64
Thd H W
01-142-3218 1/4-20 1/2 1 Steel Composition, Cadmium and Chromate
00-982-6827 1/4-20 9/16 1 treated, with Plastic Nylon locking insert.
00-515-9254 5/16-18 21/32 1-1/4
00-543-4717 3/8-16 25/32 1-3/8 Thd Size H
Thd Size 00-151-5431 1/4-28 UNJF-3B 3/8
00-274-9337 1/2-13 15/16 1-27/32
00-772-9259 3/4-8 ACME
Steel, Cadmium treated. UNC-2B thread. Steel, CRES, Silver Coated, Non Spec Item.
NUT, PLAIN, SLOTTED HEXAGON Thd Size H
Thd H W
SHEAR NUTS. For Aircraft use. Chamfered or 00-828-8189 5/16-18 19/32 1-3/16 01-030-9108 1/4-28 UNJF-3B 9/32
washer faced. Thread size, maximum nut height
listed. Steel Composition, Cadmium and Chromate NUT, SELF-LOCKING, BARREL
treated. UNC-2B threads.
Steel, Cadmium treated. Used with retainer.
Thd H W
Floating type, with metallic designed locking
01-106-1144 No.10-24 13/32 5164 device. 450 degrees Fahrenheit temperature
00-080-8495* 1/4-20 1/2 63/64 rating. Dry film lubrication.
01-064-8787 1/4-20 1/2 63/64
01-088-2490 3/8-16 3/4 1-3/8 Thd Size Dia Lg
* Drilled hole 01-259-3592 5/8-18 UNJF-3B 1-1/16 1-1/8
Steel, Cadmium and Chromate Plated.
Steel, Cadmium treated. UNF-2B threads. Non-floating type, with Nylon insert locking
Thd Size H
Thd H W device. 250 degrees Fahrenheit maximum
00-285-2177 No.10-32 UNF-3B 3/16 temperature.
00-176-8108 1/4-28 UNF-3B 3/16 00-720-8549* No.10-32 13/32 51/64
00-176-8109 5/16-24 UNF-3B 3/16 * Drilled hole
00-176-8110 3/8-24 UNF-3B 7/32
00-176-8111 7/16-20 UNF-3B 7/32 Steel, Cadmium and Chromate treated. UNF-2B
00-176-8112 1/2-20 UNF-3B 1/4 threads.
00-176-8113 9/16-18 UNF-3B 5/16
00-176-8114 5/8-18 UNF-3B 5/16 Thd H W
00-176-8115 3/4-16 UNF-3B 3/8 00-063-6716 1/4-28 1/2 1
00-176-8116 7/8-14 UNF-3B 7/16
00-177-1133 1-12 UNF-3B 1/2 COMMERCIAL TYPE, NON-SPEC ITEMS. Thd Size Dia Lg
00-176-8117 1-14 UNS-3B 1/2 00-638-5730 3/4-24 UNJF-3B 1-7/32 1-7/32
Steel Composition Treatment as noted. Wing nut
Steel Corrosion Resisting, Passivated. Thread, Height, and Width across spread as Steel Composition, Cadmium treated. Floating
shown. type with dry film lube.
Thd Size H
00-264-1240 No.10-32 UNF-3B 3/16 Thd Size Dia Lg
Steel Composition 304, CRES.
00-721-4434 1/4-28 UNF-3B 3/16 01-232-3542 1/4-28 UNF-3B 17/32 5/8
00-595-7652 5/16-24 UNF-3B 3/16 Thd H W 00-839-2017 5/16-24 UNJF-2B 19/32 11/16
00-207-9274 3/8-24 UNF-3B 7/32 01-416-5474 3/16 UNC 1/2 1
Nonfloating, with metallic designed locking nut.
Steel, Cadmium treated. Steel Composition, Cadmium treated. 550 degree Fahrenheit temperature rating.
Thd Size H Thd Size H W Steel Composition, Cadmium treated. .826 head
00-842-1490 1/2-20 UNF-2B 7/16 00-973-3697 No.10-32 29/64 7/8 diameter.
00-850-6876 5/8-11 UNC-2B 35/64 UNF-2B
Iron Alloy, Passivated. Dry film lubricated. Non Steel Composition, Passivated.
Spec Items.
Thd Size H W
Thd Size H 00-721-5093* 1/4-20 UNC-2B 1/2 1-1/16
00-273-5873 3/4-16 UNJF-3B 3/8 00-889-2500* 5/16-18 UNC-2B 5/8 1-7/32
01-119-1998 5/8-18 UNJF-3B 13/32 00-809-7616* 1/2-13 UNC-2B 15/16 1-7/8
* Drilled Hole
Thd Size Dia Lg
00-289-0241 No.10-32 UNF-3B 5/16 5/16
2-59
CLASS 5310
NUT, SELF-LOCKING, CAP Chamfered or washer faced. 450 degrees lubrication. 450 degree Fahrenheit temperature
Fahrenheit rating. rating.
Steel, with Nylon locking insert. UNF-3B thread.
Thd Size H Thd H OD
250 degrees Fahrenheit temperature rating.
01-008-9345 5/16-24 UNJF-3B 1/4 00-811-8050 5/16-24 UNJF-3B .359 .546
00-062-9602* 5/8-18 UNJF-3B .671 1.046
* Rockwell hardness rating 36 nominal.
NUT, SELF-LOCKING, EXTENDED
WASHER, DOUBLE HEXAGON Steel, Cadmium treated. 450 degree
temperature rating.
EXTENDED WASHER DOUBLE HEXAGON
NUTS. For use at various temperatures. Thread Thd H OD
Thd Size H size, nut height and washer diameter nominal 00-915-1212 5/16-24 UNJF-3B .406 .593
00-222-4246 No.10-32 11/32 dimension listed. 00-685-6779 3/8-24 UNJF-3B .462 .687
00-825-2945* 7/16-20 UNJF-3B .650 .745
With fiber locking insert. Iron Alloy. Passivated. 900 degree temperature * Temperature not rated
rating. Dry film lubricant.
Thd Size H Steel, Cadmium treated. Plastic-Polyamide
Thd Size H OD locking inserts, 520 degree temperature rating.
00-141-1767 3/8-16 UNC-3B 23/32
00-141-1768* 5/8-11 UNC-3B 1-1/8 00-173-7584 No.10-32 UNJF-3B .245 .306
* Chamfered Thd H OD
Washer faced Iron Alloy, Silver surface treatment. 1200 00-269-6797 5/16-24 UNJF-3B .396 .588
degrees Fahrenheit temperature rating. 00-297-3721 1/2-20 UNJF-3B .563 .870
Steel, CRES, with Copper Alloy locking insert.
Thd Size H OD Steel, Cadmium and Chromate treated.
Washer faced.
00-815-1041 No.10-32 UNJF-3B .347 .375
Thd Size H 00-998-8382 No.10-32 UNJF-3BG .347 .375 Thd H OD
01-227-6239 5/8-12UN-2B 1 00-975-1618* 1/4-28 UNJF-3BG .286 .404 01-065-6542 5/16-24 UNJF-3B .359 .515
00-685-1744 1/4-28 UNJF-3B .405 .437
00-964-6781 1/4-28 UNJF-3B .403 .443 Steel Composition, Silver treated. 800 degree
NUT, SELF-LOCKING, 00-058-6430 5/16-24 UNJF-3B .345 .515 temperature rating.
CASTELLATED HEXAGON 00-783-0075 5/16-24 UNJF-3B .470 .536
* Temperature not rated Thd H OD
Nickel Alloy, Chamfered. Plastic locking insert. 00-530-9927 5/16-24 UNF-3B .354 .536
Nickel Alloy, Silver surface treatment.
Thd Size H
00-605-2146 1/2-13 UNC-3B 9/16 Thd Size H OD NUT, SELF-LOCKING, EXTENDED
00-934-0012 1/4-28 UNJF-3B .323 .410 WASHER, HEXAGON
With metal locking feature, 392 degrees 00-151-9074* 5/16-24 UNJF-3B .352 .515
Fahrenheit temperature rating. * Temperature not rated EXTENDED WASHER HEXAGON NUTS WITH
ALL METAL LOCKING DEVICE. For use at
Thd Size H Steel. various temperatures. Thread size and nut
99-100-6050 5/16-24 UNF-3B 21/64 height, nominal dimension shown below.
Thd Size H OD
NUT, SELF-LOCKING, CLINCH 00-123-2499 5/8-18 UNF-3B .650 1.050
00-950-8468* 3/4-16 UNF-3B .781 1.245
* 1000 degrees Fahrenheit temperature
Steel Composition, Passivated. With Nylon rating.
locking insert. 350 degrees Fahrenheit
temperature rating. Steel Composition, Cadmium treated. 550
Thd Size H degrees Fahrenheit temperature rating.
00-827-9286 No.4-40 UNC-3B 5/32 Thd Size H OD Iron Alloy, Silver Plated. 800 degree Fahrenheit
00-688-2069 1/4-28 UNF-3B .321 .437 maximum temperature rating.
NUT, SELF-LOCKING, DOUBLE
Thd H
HEXAGON Steel Composition, Cadmium treated. 450
degrees Fahrenheit temperature rating. 00-878-3292 No. 4-40 UNJC-3B .114
DOUBLE HEXAGON NUTS, WITH ALL METAL 00-878-3291 No. 6-32 UNJC-3B .128
LOCKING DEVICE. Thread size, and maximum Thd Size H OD 00-878-7196 No. 8-32 UNJC-3B .156
nut height shown below. 00-272-6423 1/4-28 UNF-3B .353 .531 00-844-3302 No. 10-32 UNF-3B .171
00-844-4872 1/4-28 UNJF-3B .192
Steel, Composition. Cadmium treated. 90 00-881-0944 5/16-24 UNJF-3B .258
degree countersunk angle. 00-881-0943 3/8-24 UNJF-3B .274
Thd Size H OD Iron Alloy, Silver treatment. 900 degree

00-431-0618 32 UNJF-3BG .242 Fahrenheit temperature rating.
Thd H
Steel, Cadmium treated. 500 degrees Steel, Cadmium treated. Dry film lubricant, 450
degree Fahrenheit temperature rating. 00-113-4205 No.10-32 UNJF-3B .171
Fahrenheit temperature rating, chamfered face. 00-719-5570 1/4-28 UNF-3B .212
Thd Size H Thd Size H OD
01-063-1759 1-1/4-12 UNJF-3B 1.370 1.875 Nickel, Silver treatment. 850 degrees Fahrenheit
00-067-7775 9/16-18 UNF-3B 7/16 temperature rating. Dry film lubricant.
Steel Composition, Cadmium treated. Steel Composition, Cadmium treated. Soluble
2-60
CLASS 5310
Thd H Thd H Thd H
00-009-0683 1/4-28 UNJF-3B .212 00-857-4960 1/4-28 UNJF-3B .360 00-006-2250 3/4-10 UNC-3B .891
01-391-9887* 3/8-24 UNJF-3B .390 00-245-3505 7/8-9 UNC-3B 1.016
Steel, Cadmium Plated. 450 degrees Fahrenheit * Corrosion Resistant Steel CRES 00-042-4968 1-8 UNC-3B 1.042
maximum temperature rating. 01-041-2868 1-1/8-7 UNC-3B 1.198
Steel, Cadmium treated. 00-004-4583 1-1/4-7 UNC-3B 1.454
With dry film lubricant. 01-044-7273 1-1/2-6 UNC-3B 1.640
Thd H
Thd H 00-088-0551 No.4-40 UNC-3B .157 Steel, Cadmium and Chromate.
00-880-7010 No.2-56 UNJC-3B .090 00-081-8087 No.6-32 UNJC-3B .188
00-811-3494 No.8-32 UNJC-3B .281 Thd H
00-807-1471 No.4-40 UNJC-3B .114
00-807-1472 No.6-32 UNJC-3B .128 00-877-5797 No.10-32 UNJF-3B .281 00-088-1251 1/4-20 UNC-2B .328
00-807-1473 No.8-32 UNJC-3B .156 00-877-5796 1/4-28 UNF-3B .360 00-984-3806 5/16-18 UNC-2B .359
00-807-1474 No.10-32 UNJF-3B .171 00-088-0553 5/16-24 UNJF-3B .360 00-087-4652 3/8-16 UNC-2B .469
00-807-1475 1/4-28 UNJF-3B .216 00-950-0039 3/8-24 UNJF-3B .469 00-959-1488 3/8-24 UNF-2B .337
00-807-1476 5/16-24 UNJF-3B .258 00-088-0552 7/16-20 UNJF-3B .469 00-225-6993 1/2-13 UNC-2B .609
01-055-3854 5/16-24 UNJF-3B .194 00-877-5795 1/2-1/220 UNF-3B .609
01-055-3853 3/8-24 UNJF-3B .219 00-982-6809 5/8-18 UNJF-3B .766 Steel Composition, Cadmium treated.
00-807-1477 3/8-24 UNJF-3B .275 00-982-6810 3/4-16 UNJF-3B .891
00-497-3895 7/8-14 UNJF-3B 1.016 Thd H
With soluble lubricant. 00-689-3877 No.10-24 UNC-3B .281
Steel Composition, Passivated. 00-483-8792 1/4-20 UNC-3B .360
Thd H 00-245-3424 5/16-18 UNC-3B .360
Thd H 00-483-8790 3/8-16 UNC-3B .469
00-058-1823 No.2-56 UNJC-3B .090
00-811-6419 No.4-40 UNJC-3B .114 00-982-4999 No.4-40 UNJC-3B .157 00-595-7421 1/2-13 UNC-3B .610
00-807-1467 No.10-32 UNJC-3B .171 00-208-9255 No.10-32 UNJF-3B .281
00-807-1468 1/4-28 UNJF-3B .216 00-889-2589 1/4-28 UNJF-3B .360 Steel, Cadmium treated. All metal design, 550
00-807-1469 5/16-24 UNJF-3B .258 00-857-4959 3/8-24 UNJF-3B .469 degrees Fahrenheit temperature rating.
00-810-1786 3/8-24 UNJF-3B .274 00-982-4973 1/2-20 UNJF-3B .610
00-267-9974 3/4-16 UNJF-3B .891 Thd H
Steel, CRES Passivated 550 degrees 00-515-8772 1/4-28 UNF-3B .328
Fahrenheit temperature rating. Aluminum Alloy, anodized.
Steel, Cadmium treated. 250 degrees
Thd H Thd H Fahrenheit temperature rating.
00-813-6950 No.2-56 UNC-3B .090 00-905-3081 No.10-32 UNJF-3B .188
Thd H
00-845-2359 No.4-40 UNC-3B .114
Steel, Cadmium treated. 00-497-3889 No.6-40 UNF-2B .188
00-878-9518 No.6-32 UNC-3B .126
00-845-5030 No.8-32 UNC-3B .141
Thd H Steel, CRES Passivated.
00-894-3637 1/4-28 UNF-3B .212
00-925-9645 No.4-40 UNJC-3B 125
00-905-8451 No.6-32 UNJC-3B .141 Thd H
Iron Alloy, Passivated. 450 degrees Fahrenheit
00-941-6019 No.8-32 UNJC-3B .188 00-727-5223 1/4-20 UNC-3B .296
temperature rating. Dry film lubricant. Non Spec
Item. 00-902-6676 No.10-32 UNJF-3B .188
Thd H
00-903-8282 1/4-28 UNJF-3B .219
00-660-3381 5/16-24 UNJF-3B .266 00-245-8825 1/4-20 UNC-3B .296
Thd H
00-926-1852 3/8-24 UNJF-3B .282 00-241-6640* 3/8-16 UNC-3B .421
00-894-3638 No. 10-32 UNF-3B .169 00-241-6667 1/2-13 UNC-3B .546
00-902-7846 7/16-20 UNJF-3B .328
00-902-9369 1/2-20 UNJF-3B .328 00-245-8826 5/8-11 UNC-3B .624
NUT, SELF-LOCKING, HEXAGON 00-943-9897 9/16-18 UNJF-3B .375 * Steel Composition.
00-925-9642 5/8-18 UNJF-3B .407
Self-locking hexagon nuts chamfered or washer 00-939-0783 3/4-16 UNJF-3B .422 CORROSION RESISTANT STEEL Composition
faced. For use at various temperatures. Thread 316. UNC 3B right hand thread. Plastic polymide
size, maximum nut height. Steel Composition, Passivated. locking insert. A-12 Hexagon style head. Thread
size, Height, width, in inches.
Thd H
Thd H W
00-939-0849 No.4-40 UNJC-3B .125
00-925-9646 No.6-32 UNJC-3B .141 01-385-5842 .164 .250 .340
00-939-0850 No.8-32 UNJC-3B .188 01-389-8002 .190 .245 .372
00-926-1835 No.10-32 UNJF-3B .188 01-389-6996 .250 .250 .435
00-897-6145 1/4-28 UNJF-3B .219 01-389-7992 .312 .315 .497
00-956-4549 3/8-24 UNJF-3B .282 00-391-9846 .375 .375 .560
250 DEGREES. FAHRENHEIT MAXIMUM 01-385-3803* .500 .593 .746
TEMPERATURE RATING WITH NYLON 00-947-1380 1/2-20 UNJF-3B .328
01-398-2189 .625 .747 .934
LOCKING INSERTS. 01-391-9841 .750 .872 1.058
Nickel Alloy.
01-389-6008 .875 .990 1.245
Aluminum Alloy Anodized or Chromate treated. Thd H * Metallic locking feature for high
temperature end use.
Thd H 00-031-0920 1/4-20 UNC-3B .360
00-857-5548 No.4-40 UNJC-3B .157 00-701-5786 3/8-16 UNC-3B .468
00-857-5547 No.6-32 UNJC-3B .188 00-245-3504 1/2-13 UNC-3B .610
00-060-2039 No.8-32 UNJC-3B .281 00-245-8815 1/2-20 UNF-3B .610 Thd H
00-877-5798 10-32 UNJF-3B .281 01-004-6946 5/8-11 UNC-3B .766
00-176-6341 No.6-32 UNC-3B .188
2-61
CLASS 5310
RATING with all metal locking device. Steel, Steel Composition, Zinc Coated.
Thd H CRES, silver plated. marked with 12 on one
00-176-6333 No.8-82 UNC-3B .281 flat. Thd H
00-436-3290 No.10-24 UNC-3B .281 00-017-5121 5/16-18 UNJC-3B .359
00-241-6604 1/4-20 UNC-3B .360 Thread H 00-014-5855 3/8-16 UNJC-3B .468
00-241-6606 5/16-18 UNC-3B .360 00-208-4026 No.10-32 UNJF-3B .250
00-050-6646 3/8-16 UNC-3B .469 00-298-2747 1/4-28 UNJF-3B .328 450 DEGREES FAHRENHEIT MAXIMUM
00-411-4385 1/2-13 UNC-3B .610 00-208-4023 5/16-24 UNJF-3B .360 TEMPERATURE RATING WITH ALL METAL
00-406-7240 5/8-11 UNC-3B .766 00-297-8380 3/8-24 UNJF-3B .469 LOCKING INSERT.
00-241-6609 3/4-10 UNC-3B .891
NON-SPEC ITEMS Steel, CRES.
450 DEGREES FAHRENHEIT MAXIMUM
TEMPERATURE RATING WITH ALL METAL UNRATED NYLON LOCKING INSERTS. Thd H
LOCKING DEVICE. 00-232-0763 No.2-56 UNJC-3B .107
Steel.
Steel, Cadmium treated. 550 DEGREES FAHRENHEIT MAXIMUM
Thd H TEMPERATURE RATING WITH ALL METAL
Thd H 00-607-1328* 3/8-24 UNF-3B .456 LOCKING DEVICE.
00-889-2549 No.8-32 UNJC-3B .250 * Left Hand Thread.
00-061-7326 No.10-32 UNJF-3B .250 Steel, Cadmium or Zinc Plated.
00-061-7325 1/4-28 UNJF-3B .328 UNRATED METAL LOCKING INSERTS
00-982-4912 5/16-24 UNJF-3B .360 Thd H
00-982-4908 3/8-24 UNJF-3B .469 Iron Alloy. Silver treated. 00-982-4906 7/16-20 UNF-3B .469
00-062-4954 1/2-20 UNJF-3B .610
00-982-5009 5/8-18 UNJF-3B .766 Thd H Steel Composition, Cadmium treated.
01-063-5071 5/16-18 UNC-2B .353
Steel, Cadmium treated. 00-107-2229* 5/16-24 UNF-3B .340 Thd H
Thd H * dry film lube 00-721-5980* 1/4-28 UNF-3B .203
01-070-0928 5/16-24 UNF-3B .360
00-449-2378 1/2-20 UNJF-3B .328 Steel , Cadmium treated. * 2 holes
3 holes
Steel, Cadmium treated. Provided with internal Thd H
wrenching feature. 00-525-2028 1-14 UNS-3B .438 750 DEGREES FAHRENHEIT MAXIMUM
Thd H TEMPERATURE RATING WITH ALL METAL
Steel, Silver Plated. LOCKING DEVICE.
00-680-4892 No. 10-32 UNJF-3B .188
Thd H
Steel, CRES, Passivated. Soluble lubricant.
Steel, CRES Dry film lube. 00-913-2420 No.10-32 .250
UNJF-3B Thd H
Thd H
00-853-4090 5/8-11 UNC-2B .634
00-982-5000 No. 4-40 UNC-3B .157 250 DEGREES Fahrenheit MAXIMUM
00-263-2862 No. 10-32 UNJF-3B .250 TEMPERATURE RATED WITH NYLON
00-823-8835 5/16-24 UNJF-3B .360 875 DEGREES Fahrenheit TEMPERATURE
INSERTS. RATING WITH ALL METAL LOCKING DEVICE.
Steel, CRES, Passivated.
Aluminum Alloy, Anodized. Steel, Corrosion Resisting. Dry film lubricant.
Thd H
Thd H Thd H
00-982-5003 No.6-32 UNJC-3B .188
00-622-1724 No.2-56 UNC-3B .095 00-796-4415 1/4-28 UNJF-3B .297
00-059-9264 3/8-24 UNJF-3B .469
00-614-3500 No.4-40 UNC-3B .110
00-857-5561 7/16-20 UNJF-3B .469
1400 DEGREES Fahrenheit MAXIMUM
Copper Alloy. TEMPERATURE RATING WITH ALL METAL
550 DEGREE FAHRENHEIT MAXIMUM
TEMPERATURE RATING WITH ALL METAL Thd H LOCKING DEVICE.
LOCKING DEVICE. 00-050-3277 3/8-16 UNC-3B .562
Steel
Steel, Corrosion Resisting, Passivated. Nickel Alloy. Thd H
Thd H Thd H 00-558-7456 No.10-32 UNF-2B .250
00-285-5635 1/4-20 UNC-3B .320 00-205-7837 5/16-18 UNC-3B .438
00-171-2651 3/8-16 UNC-3B .561 2552 DEGREES Fahrenheit MAXIMUM
800 DEGREES FAHRENHEIT MAXIMUM 00-205-7840 1/2-13 UNC-2B .703 TEMPERATURE RATING WITH ALL.
TEMPERATURE RATING WITH ALL METAL 00-616-1586 5/8-11 UNC-3B .859
LOCKING DEVICE. 00-904-2344 5/8-11 UNC-3B A/A METAL LOCKING DEVICE.
00-205-7842 3/4-10 UNC-3B 1.015
Steel, CRES, Silver Plated. 00-205-7844 1-8 UNC-3B 1.312 Steel, CRES, Passivated.
Thd H Steel, Cadmium Plated. Thd H
00-059-9263 No.10-32 UNF-3B .250 00-558-7455 No.8-32 UNC-2B .234
00-059-9265 1/4-28 UNF-3B .328 Thd H
00-059-9266 5/16-24 UNF-3B .360 00-427-6552 5/8-18 UNJF-3B .765
00-982-4971 3/8-24 UNF-3B .469
NUT, SELF-LOCKING, KNURLED
00-982-4975 1/2-20 UNF-3B .610 250 DEGREES MAXIMUM TEMPERATURE Steel Composition, Passivated, with all metal
RATING WITH ALL METAL LOCKING DEVICE. locking device.
1200 DEGREE FAHRENHEIT TEMPERATURE
2-62
CLASS 5310
00-783-4174 No.10-32 UNJF-3B .948 lg x
.250 H x .353 W x .688 CC.
Dry film lube. 450 degrees Fahrenheit
00-780-1044* No.10-32 UNJF-3B .948 lg x
.250 H x .353 W x .688 CC. temperature rating.
* Countersunk mounting holes
00-761-4221 No.10-32 UNF-3B .526 lg x
.250 H x .250 CC.
Non Spec Items. Steel, Passivated. Dry film 00-761-6830 1/4-28 UNJF-3B .603 lg x .281
lubricant. 2 mounting holes. H x .281 CC
Thd H
00-431-6773 1/4-20 UNF-3B .409 00-510-6236 No.10-32 UNJF-3B .805 lg x 00-779-6594 No.10-32 UNJF-3B .653 lg x
.390 H x .430 W x .590 CC, .250 H x .344 CC.
Yellow color
NUT, SELF-LOCKING, PLATE Non Spec Item.
SELF-LOCKING PLATE NUT WITH ALL METAL
Steel, Cadmium Plated self-locking plate nut LOCKING DEVICE, SINGLE LUG, FLOATING Iron Alloy. Dry film lube, Yellow color.
with all metal locking device. 450 degrees NUT 2 HOLES.
Fahrenheit maximum temperature. Dry film 01-025-4391 1/4-28 UNF-2B, 1.038 lg x
lubricant. Two lug, floating nut length, height, .339 H, .707 CC.
plate width, and center to center mounting hole
distance noted in inches. NUT, SELF-LOCKING, ROUND
Steel, Composition with Plastic Polyamide
insert. UNS thread. Non Spec Items.
Iron Alloy, Passivated. 450 degrees Fahrenheit

temperature rating. Dry film lube.
00-778-9160 No.10-32 UNJF-3B 1.051 lg x
.250 H x .356 W x .312 CC.
00-283-4619* 1/4-28 UNJF-3B 1.292 in. lg x
00-771-7406 No.10-32 UNJF-3B .739 lg x .028 in. H x .574 in. W x 1.000
.250 H x .353 W x .500 CC. CC
00-771-7359 1/4-28 UNJF-3B .801 in. lg x * Non Spec Item
.281 H x .425 W x .562 CC. 4 DRIVE POINTS
Steel, Cadmium Plated. 450 degrees Fahrenheit
00-764-2391* No.10-32 UNJF-3B .739 lg x temperature rating. Dry film lube with a floating Thd Thk OD
.250 H x .353 W x .500 CC. nut. 01-110-7915 No.46-32 .406 1.125
* Soluble lubricant
01-057-9352 25/32 .532 1.367
00-772-3720 3/16-32 UNJF-3B .739 in. lg x
00-764-2392* 1/4-28 UNJF-3B .801 lg x .281 .250 in. H x .353 in. W x .500 01-056-2966 31/32 .469 1.554
H x .425 W x .562 CC. CC. 01-059-0262 1-11/64-18 .469 1.742
00-784-8145 1/4-28 UNJF-3B .801 lg x .281 01-053-7004 1-3/8-18 .500 2.054
H x .425 W x .562 CC. Steel, Cadmium Plated. 450 degrees Fahrenheit 01-054-2554 1-9/16-18 .516 2.242
* Soluble lubricant temperature rating. Dry film lube. 01-054-2555 1-49/64-18 .516 2.523
01-057-9350 1-31/32-18 .719 2.680
00-728-7715 No.8-32 UNJC-3B .692 lg x
.250 H x .263 W x .468 CC. 00-021-3884* No.10-32 UNJF-3B. .521 lg x 01-058-4659 2-5/32-18 .719 2.961
.250 H x .313 W x .219 CC. 01-057-9353 2-23/64-18 .594 3.148
00-728-7716 No.10-32 UNJF-3B .724 lg x
.250 H x .313 W x .500 CC. * Holes off-center parallel to screw hole. 01-063-1758 2-35/64-18 .641 3.367
01-057-9351 3-11/32-18 .922 4.398
00-778-9480 No.10-32 UNJF-3B 1.051 lg x
Iron Alloy, Passivated. .250 H x .356 W x .312 CC.
00-778-9482 1/4-28 UNJF-3B, 1.306 lg x 12 DRIVE POINTS
00-779-6625 No.10-32 UNJF-3B .948 lg x .281 H x .440 W x .312 CC.
.250 H x .353 W x .688 CC. Steel Composition, Cadmium and Chromate
00-773-8635 No.10-32 UNJF-3B .950 lg x treatment 450 degree temperature rating.
00-777-5787 No.8-32 UNJC-3B .948 lg x .250 H x .318 W x .312 CC.
.250 H x .353 W x .688 CC. Soluble lubricant.
00-778-2655* No.10-32 UNJF-3B .948 lg x Iron Alloy, Silver Plated. 800 degrees Fahrenheit Thd Thk OD
.250 H x .353 W x .688 CC.
temperature rating. 01-135-4159 9/16-18 UNJF-3B .933 .680
00-777-5791 No.10-32 UNJF-3B .948 lg x
.250 H x .353 W x .688 CC. 00-779-3601 No.10-32 UNJF-3B. 1.051 lg x
00-777-5793 1/4-28 UNJF-3B 1.292 lg x .250 H x .356 W x .312 CC. NUT, SELF-LOCKING, SINGLE
.281 H x .436 W x 1.000 CC. BALL SEAT, HEXAGON
00-881-0715 3/8-24 UNJF-3B 1.292 lg x SELF-LOCKING PLATE NUT WITH ALL METAL
.344 H x .577 W x 1.000 CC.
LOCKING DEVICE, DOUBLE LUG, FIXED Steel, Cadmium treatment, dry film lubricant.
* Soluble lubricant
NUT. 450 degree temperature rating.
00-764-7282 No. 10-32 UNJF-3B .948 lg x
.250 H x .318 W x .688 CC.
00-764-7283 1/4-28 UNJF-3B 1.260 lg x
.281 H x .394 W x 1.000 CC.
IRON ALLOY, Silver Plated self-locking plate nut

with all metal locking device. 800 degrees
Fahrenheit maximum temperature rating.
00-775-2567 No. 10-32 UNJF-3B .739 lg x Thd H Radius
.250 H x .353 W x .500 CC. 00-137-3036 5/16-24 UNJF-3B .311 .344
2-63
CLASS 5310
NUT, SELF-LOCKING SLOTTED beveled side; .312 inch width by .156 inch depth
HEXAGON slot on face.
ID OD Thk
Steel, Cadmium Plated self-locking slotted
00-733-9090 1.031 1.812 .500
hexagon nuts with Nylon insert locking device.
250 degrees Fahrenheit maximum temperature
Steel, Cadmium or Zinc Plated. Quenched in oil
rating. Chamfered or washer faced. UNJF-3B
and case hardened.
thread. Thread size, maximum nut height. Thk H
00-208-3467 .062 .438 ID OD Thk
00-208-3468 .187 .562 00-276-3015 .406 .750 .108
00-596-4274* .187 A/A
* No.10-24 machine screw. Steel.
Mil Std MS33737. ID OD Thk

00-276-3018* .460 .880 .120
Thk H 00-833-2583 1.562 2.500 .375
Thd H
00-208-4736 .125 .500 * case hardened
00-785-1755 No.10-32 .265 00-573-7616 .187 .562
00-961-8390 1/4-28 .296 00-875-9664 .250 .625
00-900-9421 5/16-24 .343 00-241-1075 .375 .750 WASHER, FINISHING
00-961-8391 3/8-24 .421
00-961-8392 7/16-20 .468 Aluminum Alloy, Anodized. Recessed angle 100
00-871-8758 1/2-20 .578 NUT, SLEEVE nominal degrees. Inside diameter, outside
00-455-6881 5/8-18 .734 diameter, material thickness and overall height
ALUMINUM ALLOY, ANODIZED. Flange .344 listed in inches.
inch diameter by .062 inch thick. Nut .219 inch
diameter by .640 inch length, .484 inch depth by ID OD Thk H
.168 inch diameter counter bored. SPECIAL 01-044-5989 .191 .625 .032 .094
FEATURE: 2 half-moon slots located at 190 00-884-3977 .202 .632 .016 .099
degrees on flange outside diameter .047 inch 00-981-3884 .212 .632 .025 .101
depth with .047 inch radius .062 inch width.
Steel, Phosphate treated.
Thd H 00-373-4954 No.8-32 UNC-2B R/H
00-066-4289 No.10-32 .203 ID OD Thk H
00-226-3911 1/4-28 .203 PUSH ON NUT 00-221-3108 .200 .750 .050 .196
00-961-8393 5/16-24 .203
00-961-8394 3/8-24 .234
Steel Cadmium Plated. Speed locknut used for WASHER, FLAT
00-961-8395 7/16-20 .234
quick assembling. Diameter of mating member,
00-961-8396 1/2-20 .265
00-111-3813 5/8-18 .328 outside diameter and material thickness listed in ROUND METALLIC FLAT WASHERS.
00-047-2965 3/4-16 .390 inches. Aeronautical washers. Inside diameter, outside
diameter and thickness listed in inches.
NUT, SELF- LOCKING, SPLINE Aluminum Alloy, Anodized or Chromate treated.
Steel Composition, Cadmium and Chromate
1/64 Thick.
treated. 85 degree countersunk angle. 450
degree temperature rating. ID OD
Thd H 00-183-4357 .105 .250
ID OD Thk 01-102-8473 .125 .318
01-092-0238 3/8-24 UNJF-3B .455 00-187-2397 .125 .312
01-203-5149 .201 .375 .020
00-061-2067 .305 .520 .025 00-187-2398 .149 .375
Non Spec Item. 01-147-5361 .149 .382
00-942-5139 .300 .510 .015
00-756-8141 .312 .516 .020 01-125-1225 .174 .375
Iron Alloy. Dry film lubricant. 01-067-3419 .344 .500 .016 00-184-9002 .174 .375
00-184-8987 .175 .382
Thd H 00-167-0752* .203 .438
Steel.
00-109-9007 1/4-28 UNJF 3B .333 01-215-7315 .203 .445
00-454-1513 3/8-24 UNJF-3B .463 ID OD Thk 01-172-7118 .203 .445
00-063-9097 .250 .522 .010 01-105-7241 .203 .445
NUT, SHEET SPRING 00-771-6827 .250 .438
WASHER ASSORTMENT 01-134-5792 .265 .507
00-184-9001 .265 .507
CLIP-IN TYPE SPRING NUTS. For mounting
00-167-0754 .265 .507
instruments on aircraft instrument panels. ASSORTED SPRING STEEL LOCK 10 each of 00-184-8980 .328 .562
Bronze cage with Copper Alloy nut, Cadmium 3/16; 22 each of 1/4, 5/16 and 3/8; 8 each of 7/16; 00-187-2395 .390 .632
Plated. Non-magnetic type. .671 length by .281 10 each of 1/2; 6 each of 5/8. Per box. 00-184-8979 .390 .632
width. Height above panel as indicated. For use 00-184-8985 .453 .757
with No. 6-32 machine screw. Thickness of panel 00-209-2312 00-184-8986 .453 .757
accommodated, nut height and Spec type are 00-188-7723 .578 1.069
listed below. WASHER, CONVEX 00-183-4362 .640 1.195
00-187-2396 .765 1.319
Copper Alloy SPECIAL FEATURES: 1.438 inch 00-187-2394 1.015 1.757
diameter by .250 inch depth counter bored on * Not anodized
2-64
CLASS 5310
1/32 Thick. Steel, Cadmium Plated.
ID OD
ID OD 1/64 Thick. * Not Passivated
00-515-9371 .105 .257 NAS 620
00-810-7199 .125 .312 ID OD
01-168-0882 .125 .319 00-167-0831 .125 .319 1/16 Thick.
01-352-9561 .149 .382 00-167-0832 .149 .382
00-167-0738 .149 .382 00-167-0833 .174 .382 ID OD
01-169-9627 .163 .380 00-167-0801* .203 .445
00-184-8966 .174 .382 1/32 Thick. 00-531-9515 .265 .507
00-167-0739 .174 .382 00-167-0803* .328 .569
01-123-5639 .174 .382 ID OD 00-167-0804 .390 .632
00-660-2215* .250 .359 00-167-0816 .149 .382 00-167-0805* .453 .757
* Non Spec Item 00-515-8058 .174 .382 00-167-0806 .515 .882
00-167-0834 .203 .445 00-167-0808* .640 1.195
3/32 Thick. 00-167-0835 .265 .507 * Not Passivated
00-167-0836 .328 .569
ID OD 00-167-0837 .390 .632 3/32 Thickness.
01-137-8983 .765 1.312 00-167-0838 .453 .757
00-187-2405 .890 1.507 00-167-0839 .515 .882 ID OD
00-187-2406 1.015 1.757 00-167-0841 .640 1.195 00-167-0809* .765 1.319
00-167-0842 .765 1.319 * Not Passivated
1/16 Thick.
1/16 Thick. Steel, Black Oxide finish.
ID OD
00-851-0913* .203 .445 ID OD 1/16 Thickness.
01-134-5794 .203 .445 00-167-0818 .203 .445
00-183-4406 .203 .445 00-579-1871* .250 .359 ID OD
01-106-5271* .203 .445 00-141-1795 .265 .507 00-146-7074 .328 .569
00-167-0740* .250 .500 00-281-1403* .265 .875
00-791-8501 .265 .500 00-167-0820 .328 .569 ENGINE AND PROPELLER WASHERS
01-115-3435* .265 .500 00-167-0821 .390 .632
01-145-3153 .265 .507 01-016-4871 .390 .632 Steel Composition, CRES.
00-167-1724* .328 .562 00-167-0822 .453 .757
01-199-1354 .328 .569 00-167-0823 .515 .882 ID OD Thk
00-167-1726* .390 .625 00-167-0824 .578 1.069 00-938-8387 .276 .500 .032
01-129-0607 .390 .632 00-167-0825 .640 1.195 00-938-8386 .463 .750 .032
00-187-2400 .390 .632 * Non Spec
01-369-5701 .515 .882 SPCC HX quality control item Steel Composition, Nickel-Cadmium Plated.
00-187-2402 .578 1.069
* Not anodized. 3/32 Thick. ID OD Thk
00-188-3744 .216 .438 .062
Copper Alloy, Uncoated. ID OD
00-194-0637 .278 .500 .062
00-167-0826 .765 1.319 00-194-0636 .340 .625 .062
1/32 Thick. 00-167-0827 .890 1.507 00-184-8974 .403 .750 .078
00-167-0828 1.015 1.757 00-184-8973 .465 .875 .094
ID OD 00-271-3233 1.140 1.882
00-193-9695 .328 .500 GENERAL PURPOSE WASHERS
3/32 Thick. Aluminum Alloy, Anodized.
1/64 Thick.
ID OD ID OD Thk
00-194-7291 .562 1.188 ID OD
00-550-5009 .126 .313 .032
00-584-3782 .125 .259
1/16 Thick. 00-595-6425* .125 .319 Copper Alloy, Non Spec Items.
00-638-9857 .149 .382
ID OD 00-515-7449 .265 .507 ID OD Thk
00-167-0702 .265 .507 * Not Passivated 00-350-2796 .162 .250 .032
00-595-6852 .453 .750 00-599-5616 .256 .435 .028
00-167-0706 .515 .882 1/32 Thickness. 00-193-9706 .312 .438 .031
01-430-8843 .516 .945 01-058-4661 .317 .812 .125
ID OD 00-655-9477 .380 .886 .084
Non Spec. 00-167-0797* .105 .257 00-147-6526* .393 .625 .031 .
00-531-9514 .149 .382 00-875-8249 .500 .775 .125
ID OD Thk 00-685-3744 .174 .382 00-264-0723 .510 1.000 .203
00-275-6635 .510 .812 .031 00-989-0640 .200 .359 00-955-6655 .530 1.188 .188
00-044-6234 .562 1.250 00-167-0812 .203 .445 00-194-0877 .531 .812 .031
00-515-7449 .265 .507 00-194-0924 .625 .844 .062
Iron Alloy. 00-167-0814 .328 .569 00-037-6902 .625 .875 .032
00-183-4355* .390 .632 00-595-6096 .635 1.625 .375
1/32 Thick. 00-306-3167 .515 .882 00-197-4144 .641 .875 .062
00-282-6907* .640 1.195 00-197-4169 .688 1.125 .062
ID OD Thk 00-595-6607 .765 1.319 00-470-5954 .760 1.750 .125
01-200-6068 .273 .438 00-551-8089* .890 1.507 00-304-9253 .835 1.316 .032
2-65
CLASS 5310
ID OD Thk ID OD Thk ID OD Thk
00-274-7834 1.000 1.672 .062 00-930-7013 .531 1.062 .094 00-722-5998 .158 .313 .037
00-599-4732 1.000 1.938 .025 01-041-4651 .531 1.062 .098 00-409-1763* .158 .313 .027
00-595-5800 1.016 1.500 .032 01-014-4280 .640 1.195 .063 00-880-5976 .156 .375 .049
00-275-1330 1.312 2.046 .125 00-588-2753 .641 .996 .140 01-389-8021 .157 .380 .049
* Cadmium Plated 00-770-1896 .844 1.719 .094 00-880-5978 .187 .375 .049
00-531-1813 1.031 1.875 .281 00-225-5328 .190 .443 .051
Copper Alloy, Black Oxide. 00-890-7980 1.630 2.250 .187 00-965-1806 .190 .380 .049
00-921-5424 2.125 3.125 .024 00-763-3413 .203 .560 .032
ID OD Thk 00-619-1148 .220 .443 .052
00-045-5214 .411 .816 .065 Steel, Cadmium and Chromate Plated. 00-883-9384 .220 .505 .050
00-045-5218 .505 1.073 .097 00-550-5054 .255 .567 .065
00-045-5220 .667 1.323 .097 ID OD Thk 01-391-7504 .281 .625 .065
00-951-4679 .122 .247 .022 00-582-5677 .281 .625 .065
Copper, Uncoated. Non Spec items. 00-950-1310 .125 .312 .032 00-680-6745 .317 .739 .065
00-809-8544 .189 .380 .050 01-389-6965 .344 .688 .065
ID OD Thk 00-809-8546 .220 .443 .050 00-625-5756 .344 .688 .065
00-737-5429 .330 .560 .060 00-823-8804 .255 .567 .065 01-389-7014 .380 .887 .084
00-566-4461 .343 .575 .031 00-809-3078 .317 .738 .065 00-802-4701 .380 .886 .084
00-423-4790 .375 .562 .062 00-081-4219 .349 .692 .065 01-389-7976 .411 .816 .065
00-193-9753 .387 .554 .062 00-809-5997 .500 1.261 .082 00-773-7618 .411 .816 .065
00-297-0359 .406 .750 .062 00-809-5998 .536 1.073 .097 01-389-7988 .443 1.011 .084
01-017-4148 .410 .627 .095 00-809-3079 .567 1.386 .109 00-595-6057 .443 1.011 .084
00-595-6844 .515 .875 .031 00-823-8803 .667 1.323 .097 01-389-8035 .505 1.262 .049
00-187-1855 .516 .938 .062 00-951-7209 .699 1.761 .134 00-614-3506 .505 1.262 .084
00-281-3342 .564 .753 .083 00-809-8536 .828 2.011 .149 00-767-9425 .536 1.073 .097
00-584-1421 .578 .859 .031 00-982-6562 1.058 2.500 .164 01-343-3590 .536 1.261 .101
00-116-0081 .594 .938 .031 01-389-7637 .567 1.386 .109
00-209-1761 .600 .812 .032 Steel, Cadmium Plated. Non-Spec Items. 00-656-0114 .567 1.386 .109
01-244-4517 .781 1.250 .063 00-922-1793 .599 1.481 .101
ID OD Thk 01-387-0525 .656 1.312 .095
Copper Alloy, Cadmium Plated. 00-812-4474 .194 .375 .042 00-614-3505 .668 1.324 .097
00-680-7296 .250 .359 .032 01-384-5385 .688 1.750 .134
ID OD Thk 00-655-7219 .265 .473 .063 00-720-8819 .699 1.761 .134
00-641-7148 .880 1.250 .032 00-839-8253 .312 .625 .031 01-384-4230 .812 1.469 .134
00-441-5473 .391 .750 .060 00-584-7799 .823 1.480 .134
Iron, Uncoated. 00-151-8930 .448 .809 .152 01-382-8218 .824 2.012 .189
00-576-2544 .453 .812 .065 00-584-7796 .940 1.761 .134
ID OD Thk 00-234-4240 .515 1.625 .063 00-543-2500 1.073 2.011 .134
00-187-3682 .453 .625 .031 00-194-9199* .599 1.188 .094 01-389-6953 1.074 2.012 .134
00-514-3394 .458 .620 .031 01-232-2036 .765 2.188 .125 01-389-7006 1.262 2.774 .164
01-041-4652* .812 2.000 .112 * Black Oxide film
Nickel. 00-781-1897 .896 1.250 .030
* Cadmium or Tin, or Cadmium or Zinc Steel Composition, Passivated.
ID OD Thk
00-727-0857 .221 .443 .051 Steel Composition, CRES, Passivated. ID OD Thk
00-727-0858 .286 .630 .061 Non-Spec Items. 00-058-3632 .437 .875 .084
00-972-5779 .349 .692 .061 00-584-7986 .562 1.250 .109
00-616-6750 .411 .817 .061 ID OD Thk 00-491-5895 .687 1.500 .134
00-691-0141 .536 1.073 .097 00-043-4708 .089 .154 .016 00-584-7985 .812 1.750 .149
01-097-8025 .670 1.323 .097 00-205-8583 .173 .500 .031 00-584-7983 1.062 2.250 .164
00-859-0719 .823 1.480 .134 00-105-3945 .190 .375 .031
00-304-9669 .196 .347 .050 Steel Composition, Cadmium Plated.
Nickel Alloy, Uncoated. Non Spec Items. 00-595-5992 .203 .562 .062
00-764-9564 .255 .468 .032 ID OD Thk
ID OD Thk 00-950-1403 .265 .687 .050 00-209-0027 .256 .531 .062
00-571-9710 1.280 2.250 .018 00-637-3471 .281 1.110 .064 00-209-0026 .319 .593 .062
00-194-0706 1.062 1.750 .094 00-576-1220 .375 .745 .063 00-149-9130 .383 .687 .062
00-067-9232 .375 .875 .063 00-205-8491 .446 .781 .062
Steel, Uncoated. Non Spec Items. 00-151-8817 .385 .615 .016 00-209-0295 .510 .875 .062
00-845-1877 .386 .750 .093 00-595-6612 .764 1.250 .062
ID OD Thk 00-800-9677 .515 .682 .032 00-149-9143 1.017 1.620 .062
00-984-2494 .250 .550 .042 00-945-4429 .515 .875 .125
00-205-9925 .251 .551 .020 00-840-2127 .583 .875 .036 Steel Composition, Cadmium, Chromate or
00-472-5163 .260 .420 .078 00-618-1435 .640 1.195 .032 Oxide treated.
00-832-9829 .280 .750 .063 01-006-3918 1.014 1.995 .188
00-784-7127 .287 .750 .094 Non Spec Items.
00-262-5429 .315 .547 .015 Steel Composition, CRES, Passivated.
00-059-8733 .415 .648 .048 ID OD Thk
00-213-0347 .422 1.500 .062 ID OD Thk 01-294-8593 .203 .445 .032
00-820-7022 .446 .875 .140 00-595-6761 .092 .247 .020 01-129-4375 .262 .507 .016
00-995-6924 .515 1.250 .045 00-595-6211 .122 .247 .022 01-295-5111 .265 .507 .032
00-995-9678 .531 .880 .134 00-782-1349 .127 .313 .032 01-129-6623 .325 .569 .016
2-66
CLASS 5310
POLYTETRAFLUOROETHYLENE
ID OD Thk ID OD Thk
00-274-4569 .391 1.000 .063 01-423-1747 .390 .632 .032 For use in chemical and electrical applications.
01-321-8599 .640 1.188 .063 01-321-3192* .406 2.000 .125
00-916-9214 .688 2.250 .032 * Uncoated ID OD Thk
01-013-5800 .221 .360 .031
Steel Composition, Passivated. ASBESTOS WASHERS 00-880-8211 .563 .750 .031
01-110-2456 .687 1.000 .055
ID OD Thk ID OD Thk 00-584-1423 .875 1.250 .062
00-831-2336 .230 .330 .030 00-783-6825 1.125 1.500 .063
00-599-3259 2.125 2.875 .031 PLASTIC
FELT WASHERS ID OD Thk
ID OD Thk 00-502-0106 .275 .644 .052
00-763-3925 .278 .500 .062 Wool. Used for vibration mountings, oil and 00-618-0475 .418 .571 .040
00-945-0528 .338 .625 .062 grease shields. Any color except Black or Gray 00-292-2456 1.125 1.968 .010
felt. 00-585-7594 1.625 1.803 .027
Steel Composition, Passivated. Non Spec Item.
ID OD Thk SYNTHETIC RUBBER WASHERS
ID OD Thk
00-591-7681 1.000 1.875 .312
00-685-1450 .203 .500 .060 Durometer hardness not rated. Non-Spec Items.
00-952-0309 .260 .473 .063 Wool. Used with teletype machines. Color not
01-352-9593 .265 .507 .063 specified. ID OD Thk
01-365-9402 .793 1.012 .060 00-291-2740 .190 .312 .062
ID OD Thk 01-138-4230 .211 .516 .062
Steel, Cadmium Plated. 00-599-1568 .125 .312 .062 00-599-9728 .250 .620 .062
00-599-6919 .250 .500 .094 01-147-5360 .250 3.000 .250
ID OD Thk
00-380-0437 .620 .992 .093 00-067-5672 .312 .870 .187
00-167-0765 .203 .875 .063 00-380-0438 .745 1.117 .093 00-042-0964 .366 .500 .071
00-167-0766 .265 1.125 .063 00-291-2764 .375 .562 .062
Wool, Cotton, Cellulose or Glass. 01-257-9143 .375 .609 .063
Steel Composition, Uncoated. Non Spec Items. 00-991-7193 .531 1.217 .250
ID OD Thk 00-753-2076 1.125 1.500 .062
ID OD Thk 01-292-4330 1.843 3.000 .250
00-641-0468 .406 .875 .062
01-015-3280 .256 .360 .075 00-440-5357 .906 1.750 .016 00-246-8233 3.094 4.469 .188
01-097-5771 .725 1.100 .030 00-210-2150 1.750 2.250 .093 00-239-1882 4.062 4.938 .188
01-212-6147 1.281 2.250 .179
CELLULOSE WASHER 55-65 durometer hardness rating.
Steel, Corrosion Resisting, Passivated. Non
Spec Items. ID OD Thk
Commercial Hard. Used in electrical and
mechanical applications. 00-728-7702 1.562 2.188 .125
ID OD Thk
00-057-0573 .120 .214 .032 ID OD Thk 65-70 durometer hardness rating.
00-723-9676 .125 .214 .016
00-001-9029 .256 .402 .046
01-141-6672* .125 .318 .025 ID OD Thk
00-641-7556 .375 .625 .031
00-773-7624 .148 .272 .032 01-411-4512 .277 .565 .125
01-017-8143* .180 .350 .030 00-774-9545 .547 .750 .121
LEATHER.
00-781-9483 .195 .354 .032 00-298-0125 1.469 2.000 .125
00-588-0391* .400 1.188 .195 ID OD Thk
00-317-4976* .640 .870 .060 NON SPEC ITEMS
00-186-1303 .261 .375 .062
00-930-7569 .650 1.345 .063
* Uncoated 75-85 durometer hardness rating.
Any acceptable material.
Steel. ID OD Thk ID OD Thk
ID OD Thk 00-291-9737 1.000 1.344 .188 00-285-9635 .438 .630 .114
01-303-4701 .157 .380 .050 85-95 durometer hardness rating.
01-091-1248* .286 .630 .065 Polyamide Resin (Nylon). For general purpose
00-880-5977 .312 .750 .065 and electrical use. Weather resistant.
ID OD Thk
00-639-7554 .317 .738 .065 ID OD Thk 00-582-1591 .250 .436 .062
01-423-1747 .370 .633 .032 00-610-5283 .312 .500 .062
00-579-2074 .380 .886 .084 00-042-6572 .097 .360 .062
00-846-2925 .120 .219 .031 00-291-9750 .391 .750 .062
01-103-7939 .411 .816 .065 00-610-5323 .437 .625 .062
00-579-2071 .443 .886 .084 01-057-2858 .125 .312 .047
00-836-0474 .150 .325 .045 00-599-1680 .500 .692 .114
01-422-0758 .534 1.620 .020 00-610-5324 .562 .750 .062
00-184-9121 .562 .875 .062 00-982-9529 .150 .312 .060
00-682-4425 .170 .375 .060 00-245-0376 .750 1.000 .156
00-187-4129 .687 1.125 .094 00-071-3234 1.813 3.750 .063
00-579-2073 .699 1.761 .134 00-846-4632 .252 .500 .032
00-579-2072 .567 1.262 .109 01-023-7624 .317 1.156 .070
01-219-7208 .323 1.000 .062 For hydraulic replaceable reservoir type filter
* HX quality controlled item element. 68 durometer hardness. AN part
Zinc and Chromate treated. 00-816-5300 .621 .872 .062
00-904-0743 .629 .874 .063 number stamped on washer.
01-057-5519 .656 1.120 .188
Steel Composition, Passivated. ID OD Thk
00-067-9491 4.531 6.968 .125
00-196-6695 3.500 5.250 .063
2-67
CLASS 5310
For service where resistance to oil and WASHER, KEY
serviceability at temperatures above minus 20
degrees is required. 35-55 durometer hardness. BALL and ROLLER BEARING, KEY
RETAINING WASHERS. Regular series. Carbon
ID OD Thk
Steel, Cadmium or Zinc Plated. One internal
00-764-9328 .750 1.250 .094 prebent key. Inside, outside diameter and
00-298-0126* 1.500 2.156 .031 thickness shown below. For use with plain round
* Non Spec Item nuts.
ID OD Thk
Medium swell. Mechanical and general purpose. 00-794-5949* .145 .260 .015
85-95 durometer hardness. * Steel, CRES . 1 external key.
ID OD Thk
00-625-8019 .500 .687 .062
00-291-2739 .625 1.000 .093
COMMERCIAL TYPE ROUND WASHERS 9 External Prebent keys.

ID OD Thk
Aluminum Alloy, Anodized. 00-186-0960 .491 .728 .042 ID OD Thk
ID OD Thk 00-024-2914 .258 .451 .028
11 External Prebent keys.
00-065-5187 .131 .382 .016
ID OD Thk Nickel Alloy and Copper Alloy. 2 external keys.
Nickel Alloy. 00-186-0961 .608 .820 .042
ID OD Thk 00-186-0962 .686 .946 .042
00-226-5978 .808 1.125 .042
00-194-0760 .286 .500 .062
00-194-0761 .349 .562 .062 13 External Prebent keys.
00-194-0762 .375 .625 .062
00-194-0763 .474 .750 .062 ID OD Thk
00-621-5236 .531 1.062 .094 00-186-0964 .999 1.288 .050
00-194-0764 .562 .875 .062 ID OD Thk
00-275-1311 .656 1.500 .125 15 External Prebent keys. 00-294-9930 .391 .760 .036
00-194-0765 .667 1.188 .062 00-294-9927 .500 .875 .062
00-928-2418 .688 1.500 .250 ID OD Thk
00-194-0766 .805 1.312 .094 00-186-1032 1.406 1.819 .050 Copper Alloy. 1 internal key.
00-194-0767 .949 1.500 .094 00-186-0966* 1.406 1.819 .050
00-946-2830 1.062 2.250 .144 00-186-0967 1.593 2.015 .058
00-571-9709 1.280 2.250 .031 * Uncoated
Steel, Cadmium Plated. 17 External Prebent keys.
ID OD Thk ID OD Thk
00-148-4719 .516 .938 .062 00-205-8249 1.804 2.296 .058
ID OD Thk
00-186-0969 2.003 2.453 .058
Steel Composition, Black Oxide Film. 00-186-0970 2.195 2.671 .063 00-893-6638 .760 1.719 .062
00-186-0971 2.412 2.859 .063
ID OD Thk Steel Composition, Cadmium Plated. 3 internal
01-006-2086* 1.013 1.995 .178 19 External Prebent keys. keys.
* .020 inch width by .020 inch deep
groove. ID OD Thk ID OD Thk
00-186-0972 2.600 3.077 .063 01-014-4276 .261 .375 .025
Steel, CRES, Passivated. 00-226-5980 2.803 3.326 .063 01-172-7117 .390 .515 .025
00-186-0974 2.988 3.577 .072
ID OD Thk
Copper Alloy. 1 external prebent key. 1 internal
00-069-5291 .174 .304 .032 Steel Composition, Cadmium Plated. One straight key.
internal prebent key.
Steel, Chromate and Phosphate treated. ID OD Thk
00-334-0447 .656 2.125 .031
ID OD Thk
01-092-5494 .667 1.312 .095 Steel. 5 external keys, one internal key.
Steel, Nickel Plated.

ID OD Thk
00-392-2045 .125 .250 .031 ID OD Thk
00-297-4068 .272 .450 .050
Steel, Passivated. 00-209-3573 .334 .510 .050
00-527-4509 .396 .570 .050
ID OD Thk ID OD Thk
00-297-4085 .460 .631 .063
01-018-2287 .260 .875 .050 00-543-2426 .520 .760 .063 00-397-4485 1.013 1.781 .100
Steel Composition, Cadmium Plated. Non-Spec Steel Composition, 10 external keys, one
Items. internal key prebent.
2-68
CLASS 5310
ID OD Thk ID OD Thk
00-167-0680 .579 .971 .146 00-515-9962* .261 .489 .062
00-820-6653* .645 1.079 .161 * Cadmium Plated
00-584-7888 .773 1.271 .193
00-754-2005 .901 1.464 .229 FLAT INTERNAL TEETH Nominal inside
00-584-7889 1.030 1.661 .260 diameter, outside diameter and thickness listed.
* Cadmium and Chromate treated
ID OD Thk SPCC Quality Control Item
00-779-0921 .631 .750 .031 Mercury free
WASHER, KEYWAY Steel Composition, CRES, Passivated.

Nonmagnetic.
Copper Alloy. 1 external key .156 inch length by ID OD Thk
.156 inch width. Copper Alloy
00-928-2690 .091 .172 .023
00-933-8118 .118 .209 .028 ID OD Thk
00-929-6395 .145 .250 .034
00-019-0669 .145 .285 .019
00-224-0747* .145 .250 .034
01-067-9589 .172 .293 .043
01-389-6984 .172 .296 .042 Steel Composition, Cadmium and Chromate
00-933-8119 .172 .296 .043 Plated.
01-420-7626 .197 .334 .047 ID OD Thk
ID OD Thk 00-933-8120 .198 .334 .050
01-385-2665 .256 .467 .062 00-579-0079 .146 .285 .019
00-272-6478 1.820 2.500 .131 00-559-0070* .172 .332 .021
00-933-8121 .259 .489 .067
01-389-7015 .323 .586 .083 00-576-5752 .200 .373 .023
WASHER, LOCK 00-974-6623 .323 .586 .083 00-337-8329 .232 .460 .060
00-984-7042 .388 .683 .094 00-550-1130 .262 .469 .025
Split, Helical, Ring Lock Washers. Nominal 01-389-8038 .445 .776 .110 00-167-0721 .326 .602 .031
inside diameter, maximum outside diameter and 00-973-8786 .452 .779 .114 00-595-7237 .391 .681 .036
nominal thickness listed. 01-422-4476 .507 .869 .125 00-543-4385 .652 1.053 .046
00-933-8778 .516 .873 .130 00-550-3714 .782 1.232 .051
01-389-7640 .644 1.079 .161 * Cadmium Plated
00-937-0453 .644 1.079 .161
00-937-0454 .773 1.271 .193 Steel Composition, Passivated.
00-926-5871 .901 1.464 .229 ID OD Thk
* Black Oxide Film
Copper Alloy, Cadmium Plated. Black paint 00-616-3555 .146 .285 .019
00-543-5933 .200 .373 .023
ID OD Thk 00-543-2740 .261 .469 .025
Steel Composition, Passivated. Magnetic.
00-184-8996 .118 .209 .028 00-178-8631 .326 .602 .031
00-184-8977 .145 .250 .034 ID OD Thk 00-261-7156 .521 .883 .041
00-261-8278 .198 .334 .050 00-926-5877 .390 .683 .094
00-184-8970 .259 .489 .067 00-926-5879 .455 .779 .109 Steel, CRES, Passivated.
00-184-8971 .388 .683 .099
ID OD Thk
Nickel Alloy. 00-550-3715 .119 .262 .017
ID OD Thk 00-543-2739 .172 .332 .021
ID OD Thk 01-389-7002 .172 .332 .021
00-836-2458 .132 .239 .034
00-271-7454 .197 .334 .050 01-389-6972 .261 .402 .018
00-187-2425 .259 .489 .067
NON-SPEC ITEMS FLAT EXTERNAL TEETH
00-187-2426 .323 .586 .083
00-187-2427 .388 .683 .099
00-187-2428 .453 .779 .114 Steel, CRES.
00-187-2429 .516 .873 .130
ID OD Thk
00-187-2430 .644 1.079 .161
00-187-2431 .773 1.271 .193 00-209-6068 .259 .406 .062
00-187-2432 .901 1.464 .229
Steel Composition.
Steel Composition, Cadmium Plated. Copper Alloy.
ID OD Thk
ID OD Thk 00-194-7355 .325 .507 .062 ID OD Thk
00-543-5060 .091 .172 .023 00-948-9708 .522 .890 .041
00-543-2410* .118 .209 .028 Steel Composition, Chromate and Phosphate
00-045-4007 .145 .250 .034 treated. Steel Composition, Cadmium and Chromate
00-045-3299* .172 .293 .043 Plated.
00-045-3296* .198 .334 .047 ID OD Thk
00-582-5965* .259 .489 .067 01-092-8739 .644 1.079 .156 ID OD Thk
00-407-9566* .323 .586 .083 00-596-7691 .200 .403 .023
00-004-5033* .388 .683 .099 Steel Composition. White Nickel treatment. 00-514-6674* .326 .599 .031
00-637-9541 .388 .683 .099 00-209-5116 .521 .890 .041
00-209-0965 .453 .779 .114 ID OD Thk
* Cadmium Plated
00-003-4094 .516 .873 .125 00-011-4646 .146 .253 .031
00-584-5272 .516 .873 .130 00-011-4649 .200 .337 .047 CORROSION RESISTANT STEEL
2-69
CLASS 5310
CRES, Passivated. Dimensions are as follows - ID Inside Diameter,
OD Outside Diameter, RD Recess Dia, Thk ID OD Thk RD RA
ID OD Thk 00-921-8634 .509 1.004 .156 .619 90
Thickness, RA Recess Angle Degrees.
00-209-1239 .200 .403 .022
00-527-3634 .262 .500 .026 WASHER, SHOULDERED AND
Copper Alloy.
00-922-1794 .390 .682 .036
01-389-6960 .456 .750 .036
RECESSED
ID OD RD Thk RA
01-389-7639 .520 .890 .041 00-209-3484 .378 .561 .561 .125 30
01-389-7623* .262 .504 .025 Steel, Composition. Inside Diameter .639
00-209-3483 .875 1.249 1.249 .209 30 inches; Shoulder Diameter 1.120 inches;
* AA55607
Outside Diameter 1.186 inches; Recess
Steel, Cadmium Plated. Diameter .862 inches; Shoulder Height .062
NON-SPEC ITEMS inches; Thickness .090 inches; Recess Angle 30
ID OD RD Thk RA Degrees Non Spec Item.
FLAT EXTERNAL TEETH 00-829-1318 .440 .880 A/A .160 A/A
Iron. Steel, Passivated.

ID OD Thk ID OD RD Thk RA
00-958-9398 .344 1.125 .031 00-500-1575 .769 1.250 .900 .078 45
SPLIT HELICAL, RIGHT HAND Dimensions as follows: ID Inside Diameter OD 00-612-3890

Outside Diameter OH Overall Height, RD
Recess Depth, Thk Thickness. WASHER, SPLIT
Inside diameter, outside diameter and material.
Thickness as indicated.

ID OD Thk Copper Alloy.
01-073-8614 .509 .879 .125
ID OD OH RD Thk
Steel Composition, Cadmium Plated. 00-656-0398 .328 1.500 .188 .128 .059
ID OD Thk Plastic Polyamide (Nylon). ID OD Thk
00-682-5930 .259 .535 .089 00-530-9963* .153 .268 .014
ID OD OH RD Thk
* Passivated
00-052-6362 .296 .609 .094 .074 .020
WASHER, RECESSED
Steel, CRES.
Steel Composition, Cadmium Plated. High Dimensions as follows - ID Inside Diameter, OD
strength. 90 degree recessed angle. Nominal Outside Diameter, Thk Thickness, RD Top and ID OD Thk
inside diameter, outside diameter and thickness Bottom Recess Diameter, RA Top and Bottom 00-849-1984 .152 .268 .014
listed. For use under head of 125,000 PSI Recessed Angle. 00-243-2259 .156 .312 .019
internal wrenching bolts. 00-984-0388 .234 .444 .020
00-822-8525* .270 .437 .020
* Passivated
WASHER, SPRING TENSION

Inside diameter, outside diameter overall height
Steel and material thickness as indicated.
ID OD Thk ID OD Thk RD RA
00-596-1766 .256 .531 .078 00-451-9029 .450 .750 .150 .516 45
00-595-7078 .319 .593 .078
00-149-9146 .383 .687 .078
Steel Composition, Cadmium and Chromate
00-595-7079 .446 .781 .078
00-149-9116 .510 .875 .078 Plated.
Copper Alloy.
00-596-1712 .573 .968 .078 ID OD Thk RD RA
00-275-9211 .637 1.062 .078 ID OD H Thk
00-149-9119 .763 1.250 .078 00-774-9427 .516 1.000 .125 .591 90
01-190-4630 .312 .422 .070 .012
00-596-1774 1.018 1.625 .078 01-138-9183 .312 .422 .078 .015
Steel Composition, Cadmium Plated.
Steel Composition, Cadmium and Chromate ID OD Thk RD RA Steel.
treated.
01-066-9076 .316 .615 .119 .405 90 ID OD H Thk
ID OD Thk 01-089-5672 .378 .761 .151 .499 90 00-528-5892 3.612 4.627 .334 .162
01-011-3094 .316 .593 .063
Steel, CRES. Steel Composition, Passivated.
NON-SPEC ITEMS
ID OD H Thk
00-753-7112 .252 .406 .062 .012
Steel Composition.
2-70
CLASS 5310
ID OD H Thk
01-050-1525* .769 .996 .074 .013
00-211-9911 1.872 2.420 .187 .025
01-086-9895 3.370 4.300 .347 .045
* Cadmium treated
Steel, CRES.
ID OD H Thk
01-185-8696 .572 .937 .031 .016
00-621-5445 .727 1.117 .081 .010
Steel.
ID OD H Thk
00-595-7555 .254 .875 .050 .025
00-595-8121 .469 1.250 .299 .239
Steel, Cadmium treated.

ID OD H Thk
00-733-5992 .580 .875 .043 .020
Steel Composition.
ID OD H Thk
00-141-9705 .971 1.555 .125 .014
2-71
2-72
Phone (215) 737-2336
DSN 444-2336
CLASS 5315
NAILS, MACHINE KEYS AND PINS
KEY, MACHINE
W/In. H/In. Lg/In. W/In. H/In. Lg/In.
CHAMFERED STARTING EDGE 00-902-6898 .063 .063 1.375 00-918-3116 .188 .178 .520
01-032-6181 .123 .123 .753
00-003-4107 .157 .157 3.385 B17 SQUARE CROSS SECTIONAL SHAPE
B15 SQUARE CROSS SECTIONAL SHAPE.
01-181-8156 .186 .186 1.220 WITH TWO ROUNDED ENDS. Overall width,
Overall width, height and length listed.
00-362-7498 .244 .244 2.067 height and length listed.
00-139-0179 .309 .187 1.250
00-253-3403 .500 .500 1.500
Steel, Cadmium Plated, Composition 4130

W/In. H/In. Lg/In.
00-143-6275 .090 .090 .260
Copper Alloy 268 Steel, Carbon
W/In. H/In. Lg/In. W/In. H/In. Lg/In. Nickel Alloy, Alloy-405.

01-066-2537 .250 .250 1.250 00-188-9358 .188 .188 1.188 W/In. H/In. Lg/In.
00-256-4794 .250 .250 1.500
00-199-3476 .188 .188 1.125
Steel
CRES
W/In. H/In. Lg/In. Steel.
W/In. H/In. Lg/In.
00-276-6627 .099 .187 .551 W/In. H/In. Lg/In.
00-281-7338 .156 .157 1.375 00-621-5449 .187 .125 .875
00-730-4572 .188 .188 1.375 00-967-3449 .379 .377 1.340
01-227-1329 .246 .557 .734
00-995-0569* .250 .250 2.250
01-010-9776 .370 .370 1.515 Steel Alloy.
STRAIGHT STARTING EDGE
00-595-6196 .375 .375 4.750 W/In. H/In. Lg/In.
00-373-0764 .500 .500 1.837
Copper Alloy 360 00-188-9396* .250 .250 1.438
* Passivated
Composition 316 00-198-5085* .312 .312 2.125
W/In. H/In. Lg/In. 00-228-1989* .375 .250 3.125
01-132-3561 .250 .250 1.185 00-089-3000* .493 .250 .993
B16 SQUARE CROSS SECTIONAL SHAPE
* Non-Spec item
Nickel Alloy 400 WITH ONE ROUNDED END. Overall width,
height and length listed. Straight starting edge.
B21 TAPERED CROSS SECTIONAL SHAPE
W/In. H/In. Lg/In.
WITH FLAT ENDS. Overall width, height and
01-115-5430 .125 .125 1.250 length listed.
00-199-3473 .187 .187 1.000
00-235-1074 .187 .187 1.680
01-050-6289 .188 .188 1.150
00-188-9145 .188 .188 1.250
00-730-4572 .188 .188 1.375
00-199-3405* .188 .188 2.438
00-188-9207 .250 .250 .500
Nickel Alloy
00-132-8069 .250 .250 1.625
00-247-6462 .250 .250 2.000 W/In. H/In. Lg/In.
00-198-5336* .250 .250 2.375 Steel.
00-550-8112 .188 .188 1.938
01-130-1058 .250 .250 2.265
00-543-4194* .375 .375 2.750 W/In. H/In. Lg/In.
01-084-4911 .318 .318 3.125
* Alloy 400
00-132-8073 .375 .375 1.625 00-281-7578 .156 .156 1.906
00-188-9166 .375 .375 1.875 00-010-3070 .061 .124 .375
00-281-7948 .375 .375 5.500 Steel.
00-897-6340 .499 .275 1.000 W/In. H/In. Lg/In. STEPPED CROSS SECTIONAL SHAPE WITH
* Alloy R 405 ONE ROUNDED END. Overall width, height and
00-262-8197* .182 .125 .531
00-188-4716 .375 .375 1.688 length listed. Chamfered edge.
Plastic
* Composition 304
W/In. H/In. Lg/In.
01-163-6668 .124 .124 .370 Steel, Phosphate surface treated. Straight
starting edge. Composition 4130
Steel
2-73
CLASS 5315
Key Shank
Dia Thk Size Fas/Lg Dia.
00-252-5969 1.000 .250 15 00-753-3881 6d 2.000
00-753-3882 8d 2.500
Steel Alloy. 00-753-3883 10d 3.000
00-753-3885 16d 3.500
Key
Dia Thk Size Steel, Uncoated, 50 pound box.
00-616-5519 .250 .062 20
00-616-5517 .312 .093 207 Shank
00-019-2409 .316 .062 206 Fas/Lg Dia.
Steel, Carbon. 00-687-5218 .375 .125 213 00-164-5126 3d 1.250
W/In. H/In. Lg/In. 00-616-5516 .500 .062 1 00-010-4659 8d 2.500
00-616-5515 .500 .094 2 00-010-4661 10d 3.000
01-227-1329 .246 .557 1.421 00-616-5514 .500 .125 3 00-753-3885 16d 3.500
00-616-5526 .625 .125 5 00-164-5121 20d 4.000
ROUND STARTING EDGE 00-616-5525 .625 .156 6 00-010-4665 30d 4.500
00-616-5524 .750 1/8 7
B41 PLAIN STYLE WITH ROUND JOURNAL 00-616-5523 .750 .156 8 Steel, Zinc Coated, 1 pound box.
SHAPE. 00-616-5522 .750 3/16 9
00-021-8211 .750 .250 91 Shank
Steel. 00-616-5530 .875 .250 A Fas/Lg Dia
00-012-4553 1.000 .250 15 00-161-8837 4d 1.500
W/In. H/In. Lg/In. 01-184-5785* 1.094 .250 21 00-161-8834 6d 2.000
00-010-3070 .061 .124 375 00-616-5531 1.250 .375 E 00-161-8835 8d 2.500
00-531-7885* 2.000 .156 00-161-8832 10d 3.000
B16 PLAIN STYLE and PLAIN SHAPE. * Non spec item. 01-453-7592 12d 3.250
00-161-8830 16d 3.500
Nickel. Steel, CRES. 00-161-8831 20d 4.000
W/In. H/In. Lg/In. Key DUPLEX NAIL

Dia Thk Size
01-129-0151 .188 .188 1.312
00-438-6987 .500 .094 2 Steel, Zinc Coated.
Steel.
C58 FLAT BOTTOM Flat heads, diamond point, round smooth shank.
W/In. H/In. Lg/In.
01-118-2914 .188 .188 .312 Size Lg
00-242-9119 8d 2.250
B17 PLAIN STYLE and PLAIN SHAPE. 00-242-9121 20d 3.500
Steel. Copper Alloy. FINISHING NAIL. Steel wire, brad head,

diamond point, smooth shank.
W/In. H/In. Lg/In. Key
Dia Thk Size
00-054-3220 .188 .188 .623
00-781-1992 .188 .188 .745 00-664-1525 .875 .156
00-989-2343 .188 .188 .870
00-781-2004 .250 .250 1.120 Steel Alloy.
1 pound box.
00-951-2234 .250 .250 1.500 Key
00-967-3449 .379 .377 1.340 Dia Thk Size Size Lg
00-781-2034 .500 .500 1.750 00-198-5602 2d 1.000
00-431-7098 .484 .125 3
KEY, WOODRUFF NAILS 5 pound box.
ROUND or FLAT BOTTOM. Diameter and Size Lg

COMMON NAIL. Steel wire, flat head, diamond 00-753-3888 4d 1-1/2
thickness and key size designation listed. point, round smooth shank. 00-753-3890 6d 2
50 pound box.
Size Lg
Copper. 01-448-9215 3d 1.250
00-010-4655* 4d 1.500
Shank 00-198-5606 6d 2.000
Fas/Lg Dia. 00-011-0141 8d 2.500
00-188-0044 1.500 .109 00-011-0143 10d 3.000
Nickel Alloy. 00-188-0047 2.000 .120 * Needle point, brad head.
00-188-0049 2.500 .134
Key ZINC TREATED. 1 pound box.
Dia Thk Size Steel, Uncoated, 5 pound box.
Size Lg
00-234-7043 .625 .125 5
Shank 00-198-5616 4d 1.500
Fas/Lg Dia. 00-198-5617 6d 2.000
Steel.
00-753-3880 4d 1.500 00-198-5618 8d 2.500
2-74
CLASS 5315
COTTER PIN ASSORTMENT
Dia Lg Dia Lg
100 ASSORTED COTTER PINS. Length and 00-012-0123 1/8 1-5/16 00-879-4829 3/32 3/8
diameter given in inches. 1-1/4 length by 1/16 00-298-1481 1/8 1-1/2
00-013-7214 1/8 1-3/4
diameter 15, 1/2 length by 3/32 diameter 15,
00-298-1499 1/8 2
PIN, GROOVED, HEADED
1-1/2 length by 3/32 diameter 15, 1/2 length by
00-298-1498* 1/8 2-1/2
1/8 diameter 5, 1 length by 1/8 diameter 5, 1-1/4 FLAT HEAD
00-234-1663 9/64 4
length by 1/8 diameter-20, 2 length by 1/8 00-262-8162 13/64 2-1/2
diameter 5, 1 length by 5/32 diameter 15, 1-1/2 00-846-0126 1/4 3 Steel, Cadmium Plated.
length by 3/16 diameter. * Non Spec Item
AN Standard 360-8-12
00-598-5916
Steel Composition 302 or 304, Passivated
PIN, COTTER
Dia Lg
00-067-3871 1/32 1/4 Dia Lg
01-057-3311 1/32 5/16 00-200-8834 .495 1.125
00-855-6805 1/32 1/2
00-234-1851 1/32 3/4 Steel, Phosphate Coated.
00-234-1852 1/32 1
Copper Alloy 260, Oxide Treated. 00-239-8019 3/64 1/2
00-619-7976 3/64 3/4
Diameter and length listed. 00-239-8022 3/64 1
00-200-3586 1/16 3/8
Dia Lg
01-025-4510 1/16 7/16
00-234-1619 1/16 1/2 00-815-1405 1/16 1/2
00-187-9370 1/16 3/4 00-185-0037 1/16 3/4 Dia Lg
00-187-9373 1/16 1-1/2 00-234-1854 1/16 3/4 00-608-5178 .312 1.045
00-187-9375 1/16 3 00-234-1856 1/16 1
00-187-9377 3/32 3/4 00-682-1460 1/16 1-1/4 FLAT COUNTERSUNK HEAD, 130 DEGREE
00-234-1623 3/32 1 00-234-1858 1/16 1-1/2 ANGLE
00-234-1624 3/32 2 00-234-1859 1/16 1-3/4
00-234-1626 1/8 1 00-234-1860 1/16 2
00-187-9386 1/8 1-3/4 00-182-4173 1/16 3
00-234-1628 1/8 2 00-855-6804 1/16 1/2
00-187-9390 1/8 3 00-239-8023 1/16 3/4
00-234-1631 5/32 3 00-239-8024 1/16 1
00-234-1635 11/64 3 00-234-1858 1/16 1-1/2
00-234-1638 1/4 3 Copper Alloy, Composition 260 or 270.
00-239-8027 1/16 2
00-234-1642 9/32 3 00-234-1861* 5/64 9/16 Dia Lg
00-234-1863 3/32 25/32 00-664-4699 .205 .625
Nickel Alloy 400. 00-234-1864 3/32 1
01-359-1451 3/32 1 FLAT, COUNTERSUNK UNDERCUT HEAD
Dia Lg
00-241-7330 3/32 1-1/4
00-187-9430 1/16 1/2 00-236-8353 3/32 1-1/2
00-187-9431 1/16 3/4 00-236-8355 3/32 1-3/4
00-187-9432 1/16 1 00-245-1254 3/32 2
00-187-9439 3/32 1 00-543-3696 3/32 3
00-187-9443 3/32 2 00-236-8356 1/8 1/2
00-187-9446 1/8 1 00-236-8357 1/8 3/4 Steel
00-187-9447 1/8 1-1/4 00-236-8359 1/8 1
00-965-1823* 1/8 1-15/32 00-059-0491 1/8 1-1/4 Dia Lg
00-187-9448 1/8 1-1/2 00-241-7332 1/8 1-1/2 01-029-6576 .245 .780
00-187-9460 5/32 2 00-855-6803 1/8 1-5/8
00-187-9506 9/32 3 00-236-8362 1/8 1-3/4 KNURLED HEAD
* HX Quality Control Item 00-285-7161 1/8 2
00-899-4118 1/8 2-1/4
Steel, Cadmium Plated. 00-059-0494 1/8 2-1/2
00-236-8365 1/8 3
Dia Lg
00-236-8371 5/32 1-1/2
00-236-8345 1/32 1/2 00-899-4119 5/32 2-1/2
00-828-8190 3/64 1/2 Steel, Composition 416 Passivated.
00-239-8031 5/32 3
00-839-2325 1/16 1/2 00-239-8032 3/16 1-1/2 Dia Lg
00-839-5820 1/16 3/4 00-899-4116 3/16 3
00-017-9252 1/16 1 00-896-3671 .123 2.000
00-243-1167 1/4 3
00-252-5986 1/16 1-1/2 00-243-1165 1/4 4
00-234-1652 1/16 2 * Spec 12Z5056 PIN, GROOVED, HEADLESS
00-839-2326 3/32 1/2
00-842-3044 3/32 3/4 Copper Alloy. CENTER GROOVE, OVAL ENDS. Steel, Zinc
00-816-1794 3/32 1 Plated. Both ends identical. Intermediate
00-011-9120 3/32 1-1/4 Dia Lg diameter .198 inches, Small end diameter .186
00-845-7787 3/32 1-1/2 00-881-2705 5/64 3/8 inches, length .750 inches.
00-849-9851 3/32 2
00-839-5822 1/8 1 Steel, Composition 321.
2-75
CLASS 5315
00-923-5415
Dia/In. Lg/In.
00-956-5633 .058 .942
PIN, HOLLOW
STEEL, COMPOSITION 304.
00-044-3146 Chamfered with through hole on both ends.
Length 1.540 inches overall, Diameter .500
CENTER GROOVE, RADIUS ENDS. Steel, inches overall, inside diameter .281 inches.
Cadmium Plated. Both ends identical. Length
.448 inches intermediate diameter .100 inches, 01-127-0929
small diameter .091 inches. Dia/In. Lg/In.
Countersunk both ends. Drilled through center. 01-146-9799 .064 1.188
Length 5.190 inches overall, diameter 1.750
inches overall. Fatigue and fracture critical STEEL, COMPOSITION 316.
component.
Dia/In. Lg/In.
00-449-2945 01-138-0797 00-194-2460 .080 3
FULL LENGTH GROOVE, CHAMFERED Square both ends with through hole. Length
ENDS. Steel, CRES. Both ends identical, 45 5.526 inches. Overall, diameter 2.550 inches
degree angle, small end diameter .123 inches, overall, inside diameter 1.880 inches.
large end diameter .748 inches long. Dia/In. Lg/In.
01-343-2918 00-194-2455 .079 1.938
Radius both ends with Cadmium plate and STEEL, PHOSPHATE COATED.
epoxy primed through inside diameter of hole.
Length 5.085 inches, diameter 2.000 inches Dia/In. Lg/In.
00-613-8066
overall. 54.0 Rockwell C Hardness rated. 00-731-2930 .094 1.156
ONE HALF GROOVE, ROUND FIRST END,
SQUARE SECOND END. Steel Composition 00-765-0038 PIN, QUICK RELEASE
8740 overall. Length overall 6.020 inches.
Undercut diameter .186 inches, width .090 PIN, LOCK Steel Composition 630 or 632 overall. Push
inches, radius .050 inches. button release method. Style, shank diameter,
STEEL OVERALL and grip length as listed below.
00-716-2872
T HANDLE
ONE HALF GROOVE, IDENTICAL RADIUS
ENDS. Steel Composition 416 overall. Length Shank
overall .940. Ends corner radius .188 inches Dia Grip Lg
Passivate surface. Dia/In. Lg/In. 00-880-1418 .188 .410
00-012-0809* .120 3.640 00-068-0252 .188 1.910
01-291-2290 * With 4 inch length retaining 01-239-8048 .188 2.312
chain. 00-867-9945 .250 .125
GROOVE STYLE, OVAL FIRST END, SQUARE 00-702-4893 .250 .710
SECOND END. Steel overall length overall .765 00-702-4915 .250 1.312
inches, effective length .380 inches, diameter, 00-702-4898 .250 1.500
.156 inches, undercut diameter .134 inches, 00-216-5836 .250 2.000
undercut width .385 inches. 00-702-3102* .312 2.000
Dia/In. Lg/In.
00-702-1260 .312 3.000
00-359-3654 .240 7.075 01-283-5964 .312 3.312
01-347-4164 .312 4.000
STEEL, COMPOSITION 316. 00-702-3192 .375 2.125
00-027-5679 375 2.410
00-501-3212 01-118-8932 .375 2.625
00-548-4787 .375 3.219
GROOVE STYLE, SQUARE ENDS. Steel 00-975-1959 .375 3.500
overall. Both ends identical. Length overall 4.265 Dia/In. Lg/In. 00-685-0553 .500 1.500
inches, effective length 2.515 inches diameter, 00-079-2078 .500 3.500
00-806-3947 .103 2.083 01-347-4162 .500 4.910
1.180 inches, undercut diameter 1.062 inches,
undercut width .250 inches. 00-823-4821 .562 3.000
STEEL, CADMIUM PLATED. 00-702-3126 .625 1.500
00-702-3139 .750 2.812
01-323-1742 .750 4.000
* Steel Composition 4130.
01-057-2883 Dia/In. Lg/In. L HANDLE STYLE

00-619-2985 .091 1.655 Shank
GROOVE STYLE, SQUARE (INTERNALLY
Dia Grip Lg
THREADED) ENDS. Steel Composition 4140
overall. 32.5 Rockwell hardness. Length 1.000 00-982-2638 .188 .910
inches overall. Diameter .250 inches overall. 00-891-5546 .188 1.812
Effective length .750 inches. Undercut diameter 00-151-9653 .250 .625
.173 inches, width .050 inches. 00-965-6702 .250 1.125
2-76
CLASS 5315
PIN, RETAINING Steel, Slotted drive. first end slotted, thread size
Shank .312-24 UNF-3A by .500 inch length, second end
Dia Grip Lg
Steel, Cadmium Plated. Diameter, opening width square, shank .243 inch diameter by 1.000 inch
00-945-0549 .250 1.312 length. Overall length 1.500 inches.
and prong length listed.
00-177-4110 .250 2.125
01-308-8259 .250 2.500
01-094-2863
00-945-0548 .312 .625
01-314-2429 .312 1.000
00-765-2190 .312 1.312 Steel, Cadmium Plated. First end chamfered, 45
00-945-0546 .312 2.410 degree angle, drilled hole threaded size 10-24
Dia W Lg UNC-3B, shoulder .374 inch diameter. Second
00-904-6861 .375 1.500
00-943-2054 .500 1.312 00-223-6113 .051 .156 1.062 end square, shank .292 inch diameter by .188
01-008-2981 .500 2.500 inch length, overall length 2.125 inches.
00-964-1206 .625 1.910 Steel, Passivated.
00-082-8246
Dia W Lg
RING HANDLE STYLE
00-514-2660 .062 .125 1.031 Steel. First end chamfered, 45 degree, drilled
Shank hole, thread size 1/4-28 UNF 3B, shoulder .375
Dia Grip Lg
PIN, SHOULDER, HEADED inch diameter. Second end square, shank
00-951-6908 .188 .500 diameter .312 inch, overall length 2.188 inches.
00-938-9074 .188 1.710
01-021-0026 .250 .410
01-348-3822 .250 .710 00-893-6053
00-088-6014 .250 .812
00-710-0133* .250 1.500 SINGLE SHANK/UNTHREADED
00-169-7988 .250 1.500 COPPER ALLOY
00-952-0438 .250 2.000 Steel, Chromium Plated. First end radius with
00-980-3094 .250 3.500 drilled hole .187 inch diameter. Shank .372 inch
00-143-0256 .250 4.047 Flat head, shoulder style, first step .562 inch
diameter by .558 inch length. Second end
00-925-9768 .312 1.812 diameter by 1.156 inch length. Second step .375
slotted, shoulder .498 inch diameter, length
00-925-9769 .312 2.125 inch diameter by .188 inch length. Countersunk
4.495 inches.
00-984-2774 .312 2.312 first end.
01-121-5664 .375 .625 00-908-9364
01-150-6032 .375 1.410 00-802-1837
00-571-9519 .375 1.500
Steel Composition 1095. Phosphate surface.
01-049-0159 .375 2.125 Flat head. Countersunk first end first step .438
Hardness rated 56.0 Rockwell C. Shoulder style.
00-918-7054 .375 3.219 inch diameter by 1.156 inch length. Second step
00-005-8155 .625 2.219 Shank .086 inch diameter, .688 inch length.
.312 inch diameter by .188 inch length.
01-436-3717 .750 2.719 Shoulder .154 inch diameter. Overall length
01-367-6435 .875 3.719 1.000 inch.
01-140-9950
00-833-3467 1.000 6.000
* Nickel or Copper Alloy 00-299-1191
Pan Head shoulder style. Square first end. First
step .622 inch diameter by 2.656 inch length.
BUTTON STYLE Steel, CRES. Square ends. Shank .187 inch
Second step .371 diameter by .250 length.
Square pan first end. diameter by .468 inch length shoulder. .249 inch
Shank diameter, overall length 1.594 inches.
Dia Grip Lg
00-901-3888 .188 .625 00-841-1390
00-410-6648
00-901-3884 .188 .910
00-044-4855 .188 2.000 STEEL, CADMIUM PLATED
DOUBLE SHANK/THREADED
00-904-1662 .250 .500
00-901-1330 .250 .710 Round head with wrench flats, shoulder style,
00-904-1663 .250 .910 chamfered end. First step .382 inch diameter by
00-904-1673 .250 1.500 .080 inch length. Second step .372 inch diameter
00-052-7056 .250 2.500 by 1.220 inch length, .560 inch pinhead diameter
00-150-3009 .250 4.312 by .045 inch height.
00-058-1703 .375 1.219
00-904-4786 .375 1.312 00-853-0661 Steel Composition 303.
00-453-6278 .375 1.812
01-180-2612 .375 9.910 Square ends first shank .500 inch diameter by
01-248-3400 .435 3.000
PIN, SHOULDER, HEADLESS .437 inch length. Second shank .620 inch
01-081-0912 .500 2.000 diameter by .437 inch length. Thread size 5/8-18
00-575-5740 .500 2.410 SINGLE SHANK/THREADED UNF-2A by .359 inch length. Shoulder .730 inch
01-309-9505* .500 3.000 diameter, overall length 1.890 inches. Hole
00-135-5144 .500 3.812 drilled one end .156 inch diameter.
* Corrosion Resistant Steel
00-735-4567
CAM LEVER STYLE
Square ends. Overall shank diameter .625 inch
00-111-3606 .375 1.281 Copper Alloy, Square ends, slot drive. Thread and .312 inch length. Undercut diameter .500
01-145-4045 .375 1.500 size .312-18 UNC-3A by .500 inch length. Shank inch. and width .125 inch. Second shank
.243 inch diameter by 1.000 inch length, overall diameter .500 inch and .562 inch length. Right
length 1.500 inches. hand thread size .625 inch UNF length .359 inch.
01-045-9724 00-735-4571
2-77
CLASS 5315
First end oval, shank .500 inch diameter by .562 end oval style, first step 1.000 inch diameter and
inch length , second end square, shank .620 inch .188 inch length second step .620 inch diameter OD Lg
diameter by .375 inch length , thread size 5/8-18 and .406 inch length. Third step .498 inch 00-984-6829 .125 1.000
UNF-2A by .359 inch length. Shoulder .730 inch diameter and .969 inch length. Second end 00-239-7682 .187 1.000
diameter, overall length 1.250 inches. square style. 00-195-2207 .188 1.500
00-381-3123 .243 2.750
00-735-4572 01-123-8675
COILED TUBULAR, HEAVY DUTY
First end oval, shank .616 inch diameter by .437 Shoulder style, passivate surface. Shoulder .580
inch length, second end square, shank .500 inch inch diameter, 2.060 overall length. First end Steel, Passivated.
diameter by .437 inch length. 5/8-18 UNF-2A by chamfered 15 degree, .620 inch length and .310
.359 inch. length. Shoulder .730 inch diameter, OD Lg
inch diameter. Second end square style .340
overall length 1.450 inch drilled one end .125 00-853-2325 .062 .500
inch diameter and 1.350 inch length. 00-826-1848 .078 .375
inch diameter.
00-817-0727 .078 .438
00-735-4575 01-310-1656 00-298-9856 .094 .500
00-054-6346 .093 .625
First end oval, shank .620 inch diameter by . 437 Steel Composition 630 or 660. 00-846-2143 .125 .375
inch length, second end square, shank .500 inch 00-846-2142 .125 .500
diameter by .437 inch length, with counter bored Shoulder style 1.590 inch diameter by 5.750 inch 00-812-4658 .125 .625
hole .312 inch diameter by .187 inch deep, length overall. First end chamfered 45 degree, 00-064-2470 .125 .750
thread 5/8-18 UNF by .359 inch length. Overall first step 1.215 inch diameter and .750 inch 00-846-2140 .125 .875
length 2.150 inches. length. Second step 1.238 inch diameter and 00-827-7604 .188 .625
2.750 inch length. Third step .700 inch diameter 00-685-0678 .188 .750
00-735-4568 and 1.250 inch length. Second end chamfered to 00-531-7881 .188 .875
any acceptable angle. Both ends drilled. 00-275-8263 .187 1.000
00-763-2641 .250 .750
First end square, shank .425 inch diameter by
01-285-7796 00-058-1993 .250 .500
.400 inch length, second end oval, shank .500
inch diameter by .450 inch length, thread size
Undercut style, shoulder .300 inch diameter .950 Steel, Phosphate Zinc Coated.
5/8-18 UNF-2A by .359 inch length , shoulder
.750 inch diameter, overall length. 1.562 inches. inch overall length. Both ends chamfered at 45 00-839-0901 .094 .562
degree angle. Shanks .169 inch diameter and
.375 inch length. Undercut .040 inch width and 00-410-6675 .250 .500
00-735-4578 00-846-5997 .250 .750
.169 inch diameter.
First end oval, shank .625 inch diameter by .375 SLOTTED TUBULAR
inch length, Thread size 5/8-18 UNF-2A by .359 01-006-9197
inch length, second end counter bored with hole
.300 inch diameter by .125 inch deep. Shank DOUBLE SHANK/UNTHREADED
.500 inch diameter by .425 inch length, overall
length 1.300 inches. Steel, Composition 1118.
00-735-4573 First end chamfered, 45 degree seat angle. Steel, Cadmium Plated, Composition 1074.
Shank .108 inch diameter by .581 inch length,
OD Lg
First end round shank .247 inch diameter by .375 second end square, shank .147 inch diameter by
inch length. Thread length 1/4-20 UNC-2A by .046 inch length, overall length 1.072 inch. 00-721-7642 .125 1.125
.312 inch length, second end square, shank .340
inch diameter by 2.062 inch length, overall length 00-895-1702 Composition 1070 through 1095.
3.130 inches. Hole drilled in one end .095 inch OD Lg
diameter. Undercut style .780 inch diameter and .090 inch
00-844-3939 .067 .250
width. First end shank .530 inch diameter and
00-844-3940 .067 .375
00-405-5412 .400 inch length. Second end shank .875 inch
00-844-3943 .067 .750
diameter and 2.035 inch length.
00-993-4125 .085 .625
Steel Composition 301 or 302 or 304. 00-844-4790 .101 .500
01-141-4074 00-844-3956 .097 .625
Shoulder style .500 inch diameter and 2.160 00-616-4261 .101 .750
inch length overall. Right handed threads 1.410 PIN, SPRING 00-837-4545 .101 .875
inch length. Shank .500 inch diameter and .750 00-835-1240 .101 1.000
inch length. Chamfered 45 degree taper angle. COILED TUBULAR, STANDARD DUTY 00-843-7986 .133 .500
Second end square. 00-814-3530 .133 .625
00-810-3701 .133 .750
01-034-7814 00-843-7987 .133 .875
00-810-3702 .133 1.000
Steel Composition 410. 00-844-6796 .133 1.250
Steel, Passivated. 00-527-0604 .165 .500
Shoulder .375 inch diameter, by 1.890 inch 00-844-3963 .197 .500
length. First end round .268 inch diameter by OD Lg 00-814-3531 .197 1.000
.281 inch length. Second end countersunk 90 00-663-2771 .031 .187 00-810-3704 .388 1.750
degree angle, .268 inch diameter by .312 inch 00-913-9758 .039 .250
length. 00-940-8667 .039 .375 Steel, Composition 410 or 420.
00-584-6532 .047 .250
01-123-3007 00-619-3999 .047 .312 OD Lg
00-845-9892 .047 .375 00-291-5471 .067 .193
Shoulder style with right hand thread end. First 00-187-9745 .062 .750 00-847-3735 .067 .250
2-78
CLASS 5315
OD Lg OD Lg OD Lg
00-058-9698 .067 .312 01-019-9306 .188 .750 00-282-7050 .310 .938
00-823-8740 .067 .375 00-754-1854* .188 1.125 00-929-6847 .306 .970
00-882-1438 .067 .438 00-598-6435 .250 .500 00-281-7237 .310 1.812
00-844-5644 .067 .500 00-044-4234 .312 .812 00-930-6886 .436 1.410
00-823-8754 .067 .562 * CRES
00-664-7294 .067 .625 Steel, Phosphate Nickel Surface.
00-584-0257 .067 .750 Steel, Phosphate Zinc Coated.
00-845-9890 .085 .250 OD Lg
00-823-8744 .085 .500 OD Lg 00-948-3996 .125 .595
00-823-8746 .085 .750 01-027-4759 .101 .625 00-921-0862 .250 .845
00-058-9727 .101 .250
00-039-5563 .101 .375 NON SPEC ITEMS Steel, Cadmium or Zinc Plated.
00-614-3586 .101 .443
00-058-9731 .101 .500 Copper Alloy. OD Lg
00-840-0907 .101 .562 00-845-4232 .245 .797
00-823-8745 .101 .625 OD Lg 00-281-7238 .327 1.188
00-753-3892 .101 .750 01-052-1049 .125 1.375
00-058-9737 .101 .875 01-104-6069 .375 1.000 Steel, CRES.
00-823-8747 .101 1.000
00-823-8743 .133 .375 Steel. OD Lg
00-234-7465 .133 .438 00-088-1609 .128 .562
00-881-2253 .133 .500 OD Lg 00-088-1610 .250 1.095
00-058-9747 .125 .562 01-037-5244 .065 .385 00-989-2776 .310 1.378
00-826-3251 .133 .625 00-464-7132 .100 .375
00-841-4442 .133 .750 00-483-2788* .152 .620 FLAT CHAMFER HEAD. Slotted end. Diameter,
00-841-4443 .133 .875 00-969-2851 .187 1.500 shank length and slot width and length listed in
00-753-3893 .133 1.000 00-034-3924 .188 1.750 inches.
00-058-9756 .133 1.250 00-034-3927 .188 2.250
01-154-3202 .156 .625 * Dyed green Nickel Alloy.
00-058-9767 .164 .875
00-664-6213 .164 1.000 Steel, Cadmium Plated. Slot Shank
00-664-0401 .197 .500 OD Lg W Lg
00-058-9780 .197 .625 OD Lg 00-955-0877 .122 1.120 .015 .200
00-058-9782 .197 .750 00-058-5924 .094 1.375
00-058-9784 .197 .875 00-582-2466 .125 .688 CRES
00-753-3894 .197 1.000 00-619-3277 .250 1.125
00-587-2705 .197 1.250 OD Lg
00-200-3183 .188 1.500 01-129-3538 .153 2.525
Steel, CRES.
00-844-0341 .230 2.500
00-844-0342 .261 .750 OD Lg FLAT COUNTERSUNK HEAD/UNDRILLED
00-823-8742 .261 1.000
01-072-8343 .065 1.000 SHANK. Any acceptable angle. Shank diameter
00-058-9808 .261 1.250
00-680-4626 .094 .812 and effective length listed.
00-682-1777 .261 1.500
00-627-4889 .101 2.250
00-058-9812 .261 1.750
00-814-4456 .125 1.500
00-753-3895 .261 2.000
00-063-9016 .250 1.375
00-843-9498 .325 1.250
00-889-2607 .325 1.750
PIN, STRAIGHT, HEADED
Steel, Phosphate Zinc Coated. Steel, Uncoated.
Steel, Cadmium Plated. OD Lg
OD Lg
00-051-6891 .085 .375 00-501-3210 .837 .359
00-372-0871
00-812-3312 .101 .500
00-058-6077 .133 .375 Steel, Phosphate Coated.
Overall diameter .186 inch, under head length
00-058-6079 .133 .500 4.750 inches, eye length .570 inch, loop inside OD Lg
00-058-6081 .133 .625 diameter 1.468 inches.
00-850-5754 .325 1.745 00-501-3211 .109 .775
00-879-0338 FLAT FILLISTER HEAD, UNDRILLED SHANK.

Steel, Composition 410.
Shank diameter and shank length listed.
OD Lg FLAT HEAD. Drilled end hole.
00-597-2515 .067 1.125 Steel.
00-932-9927 .094 1.625
00-598-2933 .094 2.000 OD Lg
00-543-3033 .125 .250 00-501-3209* .172 .611
00-727-5731* .125 .688 00-501-3668 .186 .750
00-616-3839 .125 .812 Copper Alloy. 00-251-9754 .500 .500
00-619-0899 .125 .938 * 100 degree countersunk,
OD Lg .068 inch deep on head.
01-007-8299 .125 1.000
00-807-0928 .125 1.875 00-753-3875 .562 1.438
00-058-9765 .165 .750 Steel, Phosphate Coated.
00-081-6829 .165 .938 Steel.
2-79
CLASS 5315
OD Lg OD Lg Dia O/A Lg T/A
00-699-9887 .182 .358 00-823-8634 .250 1.125 00-994-9648* .126 .578
00-808-9685 .125 1.195 60
PAN HEAD. Chamfer end, 15 degree angle, ROUND HEAD. Undrilled Shank. Shank 00-382-7272 .156 1.375 45
drilled hole in shank end. Shank diameter and diameter and under head length listed. 00-072-8894 .180 .390 45
effective length given in inches. 00-989-2787 .186 .695 45
00-944-7490 .186 1.045 45
00-088-1611 .187 .296 45
00-209-7977 .189 .562 13
00-014-1195 .247 .625 25
00-014-1198 .247 .812 25
Steel, Uncoated. 00-619-3392 .256 .500 45
00-952-9810* .311 .695 45
Steel, Cadmium Plated. OD Lg 00-722-6533 .375 2.500 45
00-531-7263 .060 .125 00-524-7660 .496 1.625 15
OD Lg 00-251-9986 .562 1.755 15
00-812-3741 .062 .532 Steel Composition 4130, Zinc Phosphate * 1 end drilled, .281 inch diameter
00-811-1265 .123 .595 Treated.
00-812-3750 .123 .657 BOTH ENDS RADIUS
00-811-1266 .123 .720 01-089-7675 .200 .460
00-812-3757 .123 .782 BOTH ENDS IDENTICAL
00-812-3775 .123 .907 PIN, STRAIGHT, HEADLESS
00-080-1943 .123 1.032 Diameter and overall length listed.
00-080-1942 .123 1.157 BOTH ENDS CHAMFERED
00-811-1270 .123 1.345
00-812-1204 .123 1.657 BOTH ENDS IDENTICAL.
00-052-3540* .156 .420
00-080-0170 .185 .407 Diameter and Overall length listed in inches and
00-812-3759 .185 .470 taper angle (T/A) in degrees.
00-951-2395 .185 .532 Steel, Composition 1095.
00-812-3766 .185 .595
00-811-1241 .185 .657 Dia O/A Lg
00-990-1338 .185 .725 01-018-3125 .078 .240
00-087-8226 .185 .782 00-276-6766 .094 .375
00-811-1232 .185 .845 Copper Alloy. 00-282-6888 .250 .750
00-811-1233 .185 .907 00-576-9877 .500 1.750
00-811-1256 .185 1.345 Dia O/A Lg T/A
00-812-3764 .185 1.410 00-241-7353 .093 .250 25 Steel, Phosphate Coated.
00-064-2699 .247 .610 00-282-3012 .093 1.040
00-063-7366 .247 .672 00-014-1346 .184 .500 25 Dia O/A Lg
00-081-7874 .247 .860 00-014-1359 .250 .500 25 00-997-1972 .250 .340
00-081-7016 .247 1.723 00-276-4803 .250 .750 45 00-271-3707 .126 .875
00-770-9181 .250 1.360 00-598-9429 .197 1.410
00-957-7056 .310 1.032 Nickel Alloy 502.
00-903-5944 .310 1.469 Iron Alloy 660.
00-825-8353 .372 1.094 Dia O/A Lg T/A
00-957-2399 .372 1.282 01-117-7817* .245 3.250 15 Dia O/A Lg
00-957-9395 .372 1.969 * Drilled Ends 00-934-0285 .188 .750
00-057-9985 .372 2.219
00-957-9385 .372 3.157 Steel, Uncoated. BOTH ENDS ROUNDED
00-957-0756 .496 2.907
* Non Spec item Dia O/A Lg T/A
BOTH ENDS IDENTICAL
00-501-3203 .063 .609 45
Iron Alloy 660. 00-241-7427* .095 .112 45
Diameter and overall length listed.
00-501-3207 .095 .300 45
One end drilled, pan head, straight style. Pin 00-349-8115 .110 1.345 10
chamfer angle at 15 degrees. Shank diameter 00-501-3199 .155 .354 45
and under head length listed. 00-366-3254 .250 2.312 45
00-238-0848 .310 1.375 45
OD Lg 00-394-8032 .375 1.312 45
00-998-8118 .250 .922 00-297-6421 .434 3.125 .45 Steel.
01-057-1490 .372 1.282 * Chamfered one end
Drilled ends Dia O/A Lg
00-318-9710 .147 1.922
Steel Composition XM-13, Chromium Plated.
Steel, Cadmium Plated. 00-802-2938 .500 2.125
00-947-4605* .750 1.906
One end drilled, straight style, hardness rated Dia O/A Lg T/A 01-152-9899 5.012 22.260
48.0. Pin chamfered at 15 degree angle. 00-402-5885* .624 2.150 45 01-157-3064 8.015 30.310
00-579-9881 .740 1.081 45 * Passivate coating
OD Lg
00-249-7753 .750 2.375 45 Oil coating
01-160-4638 .185 .910
* 1 end drilled, .281 inch diameter
1 end drilled, .060 inch diameter BOTH ENDS SQUARE
Steel, CRES.
Steel, Passivated. Diameter and overall length listed.
2-80
CLASS 5315
Dia O/A Lg O/A
00-501-3215 .092 .500 Dia UNF Grip Lg Lg
00-531-8502* .470 .500 .562 1.688
ONE END CHAMFERED, ONE END RADIUS. 8 * Features break-away head.
degree chamfer angle. Diameter and overall
Aluminum Alloy, Anodized Composition 6061. length listed. Steel, CRES.
Dia O/A Lg O/A

Dia UNF Grip Lg Lg
01-077-0685 .248 .804
01-106-0336* .138 .138 2.312 2.625
Copper Alloy. 00-094-1830 .196 .190 .560 .920
* UNC threads
Dia O/A Lg Features break-away head
Steel, Uncoated.
00-816-9761 .188 .562
01-176-5990 .500 1.875 Dia O/A Lg First end chamfered, second end square. Left
00-221-5926 .1885 1.500 hand thread first end. Second end tapered at 45
Nickel Alloy. degree angle.
Steel, Passivated. O/A
Dia O/A Lg
Dia UNF Grip Lg Lg
01-039-7435 .125 1.500 Dia O/A Lg
01-132-0617 .374 4.875 01-008-2537 .500 .375 .750 1.940
00-806-7040 .094 .500
01-099-9652 .499 7.562
ONE END CHAMFERED, ONE END SQUARE PIN, TAPERED, PLAIN
Plastic. Chamfered end, 1 square end.
45 degree chamfer angle. Holes drilled in both BOTH ENDS OVAL. Pin size designation and
Dia O/A Lg
ends .057 inch diameter. Diameter, effective overall length listed.
01-047-9944 .440 1.377
length and overall length listed.
Steel, Uncoated.
Copper Alloy.
Dia O/A Lg
Dia O/A Lg
00-275-4766* .132 .219
00-276-4050 .1875 1.375
00-088-1612 .156 .281 Steel.
01-011-1448 .185 .490
00-992-0700 .380 2.777 PIN, STRAIGHT, THREADED Size. O/A Lg
* 5 inches by .062 inch lead, 00-051-9867 1 .875
one end BOTH ENDS CHAMFERED, 45 DEGREES, 00-188-0177 2/0 1.250
BOTH ENDS IDENTICAL. Drilled shank 00-865-3754 3 1.375
Steel, Cadmium Plated, CRES. threaded pin. Diameter, thread size, grip length, 00-198-5974 3 1.250
Dia O/A Lg and overall length listed. 00-188-0194 3 2.000
00-934-0231 .247 2.008
Copper Alloy, 647. Steel, CRES.
Steel, Passivated Composition 302. O/A Size. O/A Lg
Dia UNF Grip Lg Lg 00-188-0214 2 1.250
Dia O/A Lg
00-088-1054 .250 .250 6.906 7.937 00-187-3241 5/0 .500
01-112-8105 .012 .250 00-187-3243 5/0 .625
00-784-7442* .062 .365 Nickel Alloy.
01-077-0687 .090 1.380
OVAL large end, SQUARE small end.
01-132-0054 .085 1.690
00-970-4847 .085 3.250 Chamfered Both ends at 45 degree taper angle.
00-903-3949 .094 .560 First end threaded right hand. Steel Composition 416. Cres Large end outer
01-217-9283 .104 5.635 radius 2.125 inches, taper .250 inches per foot,
O/A Feature: GROOVE 1.109 inches from large end
00-261-0828* .125 .297 Dia UNF Grip Lg Lg
01-047-9335* .125 .630 by .343 inch width by .735 inch diameter.
01-151-0703 .220 .250 1.3802 .060
00-816-4794 .188 .750
O/A Lg
00-233-2440 .188 .779
01-169-8346 .561 2.875 Steel, Cadmium Plated. 00-261-3194 9.218
* CRES
Oval ends, slot drive one end, other end RADIUS Large end, SQUARE small end.
COUNTERSUNK BOTH ENDS threaded 1/4 inch with 6-32 UNC-2A thread.
Diameter and length listed. CRES Large end corner radius .937 inch Taper
Copper Alloy. .234 inches per foot.
O/A
Dia UNF Grip Lg Lg O/A Lg
Dia O/A Lg
00-597-0624 .133 .562 00-261-3185 5.562
01-142-3595 .438 .812
01-242-6133 .500 .750
BOTH ENDS SQUARE. 5/16 inch hole through
length of pin. Diameter thread size, grip length PIN, TOGGLE, EYE COLLAR
ONE END CHAMFERED, ONE END
and overall length listed.
PIN and TOGGLE. Copper Alloy. Shank diameter
Steel, Uncoated. 30 degree chamfer angle. and length listed.
Steel.
2-81
CLASS 5315
Dia Lg Size W Lg
00-221-6350 1/2 2 00-889-2602 4 .455 1/4
00-221-6352 1/2 3 00-889-2603 5 .455 5/16
00-221-6353 1/2 4 00-889-2604 6 .455 3/8
00-221-6354 1/2 5
00-221-6357 5/8 3 Medium Duty.
Dia Lg 00-221-6360 5/8 6
Size W Lg
00-222-2107 3/8 2
00-222-2108 3/8 3 PIN AND TOGGLE. Steel, Composition 304. 00-889-2601 4 .455 .250
00-222-2110 1/2 2
00-222-2111 1/2 3 Dia Lg HOG RING HEAD
00-222-2112 1/2 4 00-664-0459 3/8 2.090
00-222-2113 1/2 5 00-664-0462 17/32 2.531 Steel (non-sterilized)
00-664-0463 1/2 4.000
Copper TOGGLE. Galvanized Steel Pin. Rectangular, Stock diameter .062. 1/4 inch
STAPLE completely closed staple inside diameter.
Dia Lg
00-221-6333 1/4 1 00-680-3957
STRAIGHT RECTANGULAR HEAD
00-221-6335 1/4 2
00-221-6336 1/4 3 Nickel-Copper Alloy.
00-221-6337 3/8 1-1/2 Steel
00-221-6339 3/8 2-1/4 Straight rectangular stock. Blunt point,
00-221-6340 3/8 2-1/2 Smooth shank. Size, width between prongs, and Hardened, Fish hook barbs on both points. Size,
00-221-6342 3/8 3 overall length listed. width between prongs, and overall length listed.
00-221-6344 3/8 3-1/2
00-221-6345 3/8 4 Heavy Duty. Size W Lg
00-221-6347 17/32 4-17/32 00-812-0142 15/16 7/16
2-82
Phone (215) 737-2336
DSN 444-2336
CLASS 5320
RIVETS
COLLAR, GROOVED PIN-RIVET No. 10-32 UNJF-3B PIN-RIVET, THREADED

ID OD H
Aluminum Alloy 2024, Anodized HI-SHEAR THREADED PINS
00-631-3429 .188 .305 .447
Flat chamfer head. Close tolerance shank.
1/4-28 UNJF-3B
ID OD H
00-631-3430 .256 .410 .547
PIN-RIVET, GROOVED
Grease film lubrication
NOTE: Rivet pins should be installed with Steel-Alloy, Cadmium Plated
ID OD H
collars and tools as recommended
00-551-8001 .250 .395 .228
by the manufacturer and in Heat treated to 160000-180000 PSI tensile
Aluminum Alloy 6061, Configural type heat accordance with the Manufacturers strength.
treated to H-84. instructions. See Collar. Rivet Pin for
the applicable collar to install with No. 8-32 UNJC-3A
ID OD H pins.
Dia Grip/Lg
00-286-4631 .262 .405 .320
00-959-0334 .163 .193
Copper Alloy 464 00-959-0158* .163 .193
00-959-0336 .163 .255
ID OD H 00-959-0338 .163 .317
01-082-2171 .377 .688 .094 00-959-0345 .163 .380
00-959-0350 .163 .630
* Flush 100 degree countersunk
COLLAR, PIN-RIVET, THREADED HI-SHEAR TYPE PINS head.
NOTE: Collars should be installed with the Aluminum Alloy, Comp 6061 No. 10-32 UNJF-3A
applicable rivet pin and tools as
Undercut, Pan Head, Multiple grooved pin rivet Dia Grip/Lg
recommended by the manufacturer,
and in accordance with the shank. 00-959-7205 .190 .130
00-959-7214 .190 .193
manufacturers instructions. Collar Shank Grip 00-959-0150* .190 .193
selection is usually based upon Dia Lg 00-999-9407 .190 .255
temperatures involved in the 01-207-0351 .249 .687 00-959-0148* .190 .255
application and the method of 01-204-4045 .249 .937 00-869-1498 .190 .255
installation. See pin-rivet, grooved 01-204-4046 .249 1.000 00-959-0461 .190 .317
for the applicable rivet pin to install 00-959-0463 .190 .380
Iron Alloy 660 00-959-0145* .190 .505
with collar. 00-103-0727 .190 .567
Dry film lubrication 32 UNJC-3B, thread size * Flush 100 degree countersunk
.164 inches. Operating temperature range head.
176.67 to 648.89 degrees Celsius.
32 UNJF-3A
Shank Grip
Dia Grip/Lg
00-298-6164 .177 .285
01-208-8072 .249 .750 00-701-9807 .190 .193
01-201-8980 .249 .813 00-864-6097 .190 .317
FOR HI-SHEAR TYPE PINS 00-864-6099 .190 .380
01-207-0352 .249 .875
00-869-4298 .190 .443
Aluminum Alloy, Anodized 00-869-1486 .190 .505
Steel, CRES
Cetyl Alcohol lubrication Titanium Alloy
Multiple grooved shank, 1455 single PSI shear
strength.
No. 8-32 UNJC-3B 32 UNJF-3A, Cetyl Alcohol lubrication
Shank Grip
ID OD H Dia Grip/Lg
01-017-4185 .193 .178
00-076-4071 .169 .290 .427 01-377-2618 .190 .325
00-959-0172 .170 .290 .437 00-292-6074 .190 .380
2-83
CLASS 5320
RIVET, BLIND
Shank Dia Grip Range Shank Grip
00-932-5717 .188 .188-.250 Dia Range
For use where access to only one side of the
01-133-2233 .127 .251-.312
work is available. To be installed with tools
Universal head, pull through hollow shank. Knob 01-084-6093 .127 .313-.375
supplied or recommended by the rivet
stem type K. 01-033-8639* .142 .063-.125
Manufacturer and in accordance with 01-129-4525 .158 .065-.125
Manufacturers instruction. Shank Dia Grip Range 01-084-6090 .158 .126-.187
00-993-7363 .156 .187 Nom 01-084-6089 .158 .188-.250
Shank diameter and grip range shown as 01-135-6799 .158 .376-.437
minimum and maximum or nominal dimensions 01-036-2824* .173 .188-.250
Oval/Truss head style, pull through hollow
in inches. 01-084-6101 .190 .188-.187
shank. Knob stem-type K.
01-136-1785 .190 .188-.250
Aluminum Alloy Shank Dia Grip Range 01-136-1787 .190 .251-.312
00-956-7355 .188 .126-.250 * Non Spec item.
Flush countersunk head, 100 degree angle.
Drive pin shank. Plain type T. Shank Grip
Universal head, self plugging shank Plain Stem Dia Range
Shank Dia Grip Range Type T. 01-034-1885 .142 .126-.187
00-918-4798 .125 .126-.187 Shank Dia Grip Range 01-034-1883 .142 .188-.250
01-034-1886 .142 .251-.312
01-014-7503* .125 .126-.187 01-040-4811 .142 .313-.375
Flush countersunk head, 100 degree angle. Self 00-510-7823 .126 .063-.125
plugging shank, plain stem Type T. 01-090-3166 .142 .376-.437
00-904-4136 .126 .126-.187 01-092-2125 .142 .438-.500
Shank Dia Grip Range 01-015-6896 .126 .188-.250 01-034-6673 .174 .063-.125
00-052-1972 .126 .251-.312 01-133-7300 .174 .126-.187
00-987-1076 .125 .063-.125
00-903-8778 .126 .313-.375 01-035-6183 .174 .251-.312
00-054-8416* .157 .188-.250
00-303-1060 .157 .040-.125 01-034-2843 .174 .313-.375
00-493-4103 .187 .161-.220
00-938-6713 .157 .188-.250 01-087-8841 .174 .376-.437
00-057-1706 .188 .080-.125
00-395-6494 .157 .251-.375 01-033-9126 .204 .188-.250
01-004-4137 .188 .500 max
00-408-6073 .188 .063-.125 01-033-8181 .204 .251-.312
* Serrated stem Type with expansion
device. 00-493-4101 .188 .126-.250
120 Degree head angle. 00-409-6841 .188 .251-.375 Universal head, self-plugging shank
Strain hardened locking ring. 00-408-9928 .188 .376-.500
Mechanically Locked Stem. Type W.
* Non Spec Item
Flush countersunk head, 100 degree angle. Self Shank Grip
plugging, shank mechanically lock stem. Serrated stem Type W. Dia Range
Serrated stem Type W. 01-151-1061 .127 .063-.125
Shank Dia Grip Range
01-138-4239 .127 .126-.187
Shank Dia Grip Range 00-582-3305 .126 .126-.187 01-143-5079 .127 .188-.250
00-151-5516 .126 .063-.125 00-582-3496 .157 .188-.250 01-134-5844 .127 .251-.312
00-006-0806 .126 .126-.187 00-115-6368 .157 .188-.250 01-086-3597 .127 .313-.375
00-176-6281 .126 .188-.250 01-136-8361 .158 .063-.125
00-090-5394 .126 .251-.312 Universal head self plugging shank 01-133-5889 .158 .126-.187
00-246-4369 .157 .080-.125 Mechanically, Locked Stem. 01-085-1240 .158 .188-.250
00-165-2084 .157 .126-.187 01-134-5839 .158 .251-.312
Shank Dia Grip Range 01-159-9411 .158 .313-.375
00-165-2083 .157 .251-.312
00-922-3517 .157 .251-.312 01-143-5075 .190 .063-.125
Flush countersunk head, 100 degree angle. Self 00-213-9158 .188 .313-.375 01-135-7319 .190 .126-.187
plugging shank with grooved end for locking. 00-997-4727 .188 .376-.437 01-136-1782 .190 .188-.250
Plain stem Type T. 00-213-9163 .188 .501-.562 01-084-9235 .190 .251-.312
Shank Dia Grip Range Shank Dia Grip Range Shank Grip
00-150-4092 .126 .063-.125 Dia Range
00-239-1293* .127 .179-.203
00-081-8307 .188 .215-.312 00-151-5520 .126 .126-.187 01-033-8641 .142 .020-.062
* Serrated stem Type W 00-008-3719 .157 .063-.125 01-033-9127 .142 .063-.125
00-188-1613 .157 .126-.187 01-033-8642 .142 .126-.187
Oval/truss head, pull through hollow shank. 01-033-9128 .142 .188-.250
Universal head, self-plugging shank with 01-033-9663 .142 .251-.312
Shank Dia Grip Range grooved end for locking. Serrated stem, Type W. 01-040-4810 .142 .313-.375
00-454-5156 .187 .351-.430 01-091-1864 .142 .376-.437
Shank Dia Grip Range 01-091-9175 .174 .062 max
Oval washer head, drive pin shank. Plain stem 00-945-4694 .125 .025-.062 01-033-8177 .174 .063-.125
Type T expansion device. 00-167-4943 .127 .037-.061 01-037-1249 .174 .251-.312
01-033-8179 .174 .188-.250
Shank Dia Grip Range Aluminum Alloy and Steel Cadmium Plated. 01-033-8176 .174 .251-.312
00-918-4886 .156 .063-.125 01-033-8178 .174 .313-.375
Flush countersunk head, self plugging 01-091-9177 .174 .376-.437
Universal head, self plugging mechanical Mechanically Locked Serrated Stem. Type W. 01-092-6976 .174 .438-.500
locking stem. Serrated stem Type W. 01-081-2546 .203 .020-.062
Shank Grip 01-033-9125 .203 .063-.125
Shank Dia Grip Range Dia Range 01-033-8638 .203 .126-.187
00-945-4746 .125 .063-.125 01-085-3321 .127 .051-.125 01-033-8637 .203 .188-.250
00-941-7908 .125 .126-.187 01-136-4497 .127 .126-.187 01-034-1884 .203 .251-.312
00-988-9150 .156 .188-.250 01-136-3562 .127 .188-.250 01-033-8180 .203 .313-.375
2-84
CLASS 5320
Aluminum Alloy Sleeve, Anodized, Steel Universal head, self-plugging shank. Plain stem
Stem Type T. Shank Grip
Dia Range
Oval/truss head, self plugging shank. Knob stem Shank Grip 01-290-3803 .164 .099-.101
Dia Range 01-291-2267 .164 .345-.406
type K.
00-171-2693 .250 .301-.500
Shank Grip Steel
Dia Range Universal head. Self plugging shank,
00-850-3282* .094 .376-.500 Mechanically Locked Serrated stem Type W. . Oval/truss head, pull through hollow shank. Plain
00-850-3267 .156 .251-.375 stem type T.
* Plain stem Type T Shank Grip
Dia Range Shank Grip
Universal head, self-plugging shank, knob stem 01-042-2894 .141 .188-.250 Dia Range
type K. 00-850-3247 .188 .063-.125
Steel
Shank Grip Oval truss head, self-plugging shank, type T.
Dia Range Flush countersunk head, 100 degree angle. Pull
00-860-6605 .094 .040-.125 through hollow shank. Shank Grip
00-426-4916* .187 .062-.250 Dia Range
00-850-3266 .187 .063-.125 Shank Grip 00-850-3233 .187 .126-.250
00-962-4693 .187 .251-.375 Dia Range
00-571-2363 .187 .501-.625 00-135-1125 .094 .063-.125 Oval truss head, self-plugging high clinch shank.
* Plain stem Type T expansion 00-005-6257 .094 .376-.437 Knob stem type K.
device. 00-865-8994* .125 .250 Nom
Non Spec item * Drive stem Type H Shank Grip
Dia Range
Iron Alloy Steel, Overall 00-850-3225 .156 .251-.375
00-850-3241* .187 .251-.375
Flush countersunk head, self-plugging Flush countersunk head, 100 degree angle. Pull * Non Spec Item
mechanically locked stem. Serrated stem Type through hollow shank. Serrated stem Type W.
W. Flush countersunk head, 100 degree angle.
Shank Grip Blind rivet, nut and bolt shank. Threaded stem.
Shank Grip Dia Range
Dia Range 00-005-6256 .094 .188-.250 Shank Grip
Dia Range
00-519-7875 .126 .063-.125
01-369-5750 .157 .126-.187 Oval/truss head, pull through hollow shank. 00-986-6904 .311 .125
Knob stem type K. 00-735-4966 .311 .312
Nickel Alloy Anodized, Cadmium and Chromate Nom
Treatment. Shank Grip
Dia Range Titanium Alloy and Steel Comp
Flush countersunk head, 100 degree angle. Self 00-965-9504 .125 .121-.170
plugging mechanically locked stem. Serrated Flush countersunk head, 100 degree angle.
stem type W. Steel, Cadmium Plated Threaded self-plugging shank with sleeve.
Threaded stem.
Shank Grip Flush countersunk head pull through hollow
Dia Range Shank Grip
shank. Type W. Dia Range
01-091-6942 .095 .063-.125
00-958-8383* .125 .045-.062 Shank Grip 01-279-3378 .163 .188
00-800-6277 .141 .063-.125 Dia Range 01-279-3379 .163 .250
00-800-6278 .141 .126-.187 00-411-9439 .094 .126-.187 01-279-3380 .163 .313
00-958-6194 .141 .188-.250 01-280-4613 .163 .438
00-005-0989 .141 .313-.375 Flush countersunk head, self plugging high 01-279-3844 .198 .188
00-800-6274 .174 .063-.125 01-279-3845 .198 .250
clinch shank. Type W.
* Non Spec Item 01-279-3847 .198 .375
Shank Grip
Universal head, pull through hollow shank, type Dia Range RIVET, SOLID
W. National aeronautical . Type W, with lock ring. 01-234-1461 .094 .251-.312
00-005-6258 .094 .376-.437 Aluminum Alloy
Shank Grip
Dia Range
Flush countersunk, 100 degree angle. Aluminum Alloy rivets with moderately high
00-800-6275 .141 .063-.125 Self-plugging shank, mechanically locked Stem. strength, suitable for riveting Aluminum Alloy
Have mechanical Steel locks. sheet. Solution heat-treated (T4) by
Universal head, self plugging shank,
Mechanically Locked Serrated Stem. Type W. Shank Grip manufacturer, and require no further treatment
National Aeronautical. Dia Range before use.
Shank Grip 00-515-0076* .198 .125-.187

01-231-3326 .198 .344-.407 Aluminum Alloy, Comp. 2117-T4 Anodized.
Dia Range Dash No.
* Non Spec Item
00-999-2188* .125 .126-.187 Straight shank with plain, chamfered, or radius
00-779-0293 .174 .126-.187 B5-3 ends. Shank diameter and fastener length
Steel, CRES
00-937-5448 .174 .251-.312
shown in inches.
00-490-2237 .203 .376-.437 B6-7
* Non Spec Item Flush countersunk head, 100 degree angle.
Threaded self-plugging shank. National Flush countersunk head, 100 degree angle.
Nickel and Steel Aeronautical. Straight chamfered radius.
2-85
CLASS 5320
3/32 inch SHANK Diameter
Fas Lg
00-117-6828 3/8 Fas Lg
00-117-6830 1/2 00-702-4975 3/4
00-117-6833 3/4
Fas Lg
1/16 inch SHANK Diameter Fas Lg 00-684-9910 1/4
Fas Lg 00-117-6837* 1/4 00-806-2623 1-1/4
00-117-6010 3/16 01-349-8951 5/16
00-619-4039* 5/16 Iron Alloy
00-117-6839 3/8
00-117-6840* 7/16 Universal head, countersunk shank.
Fas Lg 00-117-6841 1/2
00-117-6843* 5/8 1/16 inch SHANK Diameter
00-117-6937 3/16
00-117-6845 1
00-117-6938 1/4
* Without Chamfered Fas Lg
00-117-6939 5/16 ends
00-584-0672 3/8 01-083-6532 5/16
00-117-6941 7/16
00-117-6942 1/2 Universal head, straight shank.
Fas Lg
1/8 inch SHANK Diameter 01-289-6073 3/8 1/8 inch SHANK Diameter
Fas Lg 00-117-6851 3/8
Fas Lg
00-117-6853 1/2
00-117-6948 3/16 00-117-6856 3/4 00-926-5899 1/4
00-117-6949 1/4
00-117-6950 5/16 Steel, Cadmium Plated
Aluminum Alloy 2024, Anodized
00-117-6951 3/8
00-117-6952 7/16 Flush countersunk head, 100 degree angle.
00-117-6953 1/2 5/32 inch SHANK Diameter
Straight shank.
00-117-6956 3/4 Fas Lg
00-117-6880 1-3/4
00-143-6079 5/16
5/32 inch SHANK Diameter 00-902-8678 3/8
Fas Lg Flush countersunk head, straight shank.

00-117-6881 1/4
00-117-6883 3/8
01-288-5666 7/16
00-117-6885 1/2 Fas Lg
00-117-6888 3/4 00-291-0932 2
Copper Alloy Titanium Alloy
Aluminum Alloy 2117, Anodized
1/8 inch SHANK Diameter Universal head, straight shank.
Universal head with chamfer radius. Mil Std
MS20470-. Fas Lg
00-170-3039 3/16
Nickel Alloy, 400 Series
Flush countersunk head, 100 degree angle. RIVET, SPLIT

Straight chamfered shank.
1/16 inch SHANK Diameter Copper Alloy
Fas Lg Oval/truss head, split shank.
00-119-6774 1 Fas Lg
01-163-5873 1/4
Universal head, straight shank.
Fas Lg
00-117-6815 1/4
00-242-0370* 7/16
00-808-7822 1/2
.146 inch SHANK Diameter
* Aluminum Alloy 1100
Fas Lg
1/8 inch SHANK Diameter 00-276-1299* 3/8
1/16 inch SHANK Diameter * Slot 11/32 inches
Fas Lg
Fas Lg deep.
00-117-6516 3/16
00-117-6826 1/4 00-889-2678 3/16
00-754-0822 5/16 00-068-0405 9/16
2-86
CLASS 5320
RIVET, TUBULAR
Aluminum Alloy 2117 with Oxide film

Shank Hole
Dia Fas Lg Dp
00-821-4995 .060 1/8 1/16
00-721-5244 .088 5/32 1/16
Steel, Comp 430
.120 inch SHANK Diameter

Fas Lg Hole Dp
01-119-5093 .750 .095
Nickel Alloy, Annealed

Fas Lg Hole Dp
00-789-2077 1/4 A/A
Steel CRES

Fas Lg Hole Dp
00-219-7354 .188 .105

Fas Lg Hole Dp
00-286-7578 .500 .190
00-205-7344 .562 .210
2-87
2-88
Phone (215) 737-2336
DSN 444-2336
CLASS 5325
FASTENING DEVICES
CAP, SNAP FASTENER

Designed to permanently fasten a snap fastener
socket to a material.
E/H DB/F
00-285-7795NP .188 .171
00-141-7957NP .203 .125
LARGE RIVET TYPE. EJECTOR SPRING, TURNLOCK

Cap Cap FASTENER
REGULAR WIRE SPRING CLAMP. O/A Lg Head Dia
00-281-2553NP .266 4B .018 inches thick. Dimensions as follows: A
Spring overall Length; B Spring mounting. hole
Copper Alloy Enamel Coated. diameter; C Distance from grommet hole center
CHAIN, INTERLOCKING, SLIDE to mounting hole center.
O/A Shank Shank
Lg/In. Lg/In Dia/In. FASTENER
00-359-6844NP .297 .172 .156
Copper Alloy chain with Olive Drab Cotton tape.
Closed bottom type stop. Mildew and water
Copper Alloy 260, Nickel Plated.
resistant. Fastener extension 3/4 to 1 inch. 120
O/A Shank Shank inches long.Tape width 3/4 inch, non-separating,
Lg/In. Lg/In. Dia/In. non-reversible. Cadmium and Chromate Treated.
00-276-4953NP .281 .172 .156
Size A B C
SMALL WIRE SPRING CLAMP TYPE 00-281-4781NP Medium 00-703-1451NP 3.810 2.844 .259
Copper Alloy. CLINCH PLATE, SNAP FASTENER Steel, Cadmium Plated Steel.
O/A Shank Shank A B C

Copper Alloy, Nickel Plated. For permanently
Lg Lg Dia 00-321-4269NP 3.375 2.500 .312
fastening snap fastener sockets or studs to a
00-253-5339NP .219 .125 .109 material by prongs or riveting. 13/16 inches wide
by 15/16 inches long by 1/16 inches high. EYELET, METALLIC
STRAIGHT ROUND TYPE BARREL. Barrel
height (A), barrel outside diameter (B) and
flange outside diameter (C), given in inches.
THREE WAY LOCKING TYPE.

00-276-4282NP
Aluminum Alloy, 2017 or 2117 00-276-4283NP* Copper.
* Enamel Coated
O/A Shank Shank A B C
Lg/In. Lg/In. Dia/In. 01-029-0816NP .050 .031 .048
00-737-7648NP* .626 .500 .274
EJECTOR SPRING ASSEMBLY,
* Non Spec Item TURNLOCK FASTENER Copper Alloy, Gold Plated.
Steel, Cadmium or Zinc Treated. With ring type A B C

Copper Alloy, Oxide finish.
securing device. Dimensions as follows: E/H 00-097-6527NP* .047 .047 .075
O/A Shank Shank (Eyelet Height); DB/F (Distance Between 00-062-2374NP* .063 .047 .075
Lg/In. Lg/In. Dia/In. Flanges, SO/D (Smallest Outside Diameter), 01-030-8486NP* .064 .061 .092
00-891-9073NP* .296 .171 .156 .475; long outside diameter; Largest Outside 00-139-0328NP* .078 .022 .032
* Non Spec Item Diameter .625; Eyelet Inside Diameter .421. 00-470-5311NP* .079 .031 .047
00-947-4440NP .093 .030 .059
Copper Alloy, Enamel Finish. 00-558-1785NP* .093 .047 .075
2-89
CLASS 5325
Steel, Nickel overall.
A B C
01-076-9499NP* .093 .060 .090 ID OD H
01-034-2869NP* .093 .060 .090 00-043-4682NP .421 .621 .113
00-813-6947NP .093 .059 .105
00-234-7913NP* .094 .031 .047
01-057-7256NP* .094 .047 .075
FASTENER ASSEMBLY,
Aluminum Alloy overall.
00-726-8804NP .125 .062 .105 TURNLOCK
00-956-5741NP .156 .089 .150 ID OD H
01-047-9525NP .170 .087 .076 00-638-4301NP .188 .312 .125 Steel, Cadmium and Chromate Treated. Stud
* 1 flat flange 00-281-4969NP .219 .375 .063 shank style turnlock. Flat countersunk head
00-141-4003NP .252 .438 .087 style, and turnlock receptacle with plain
FLAT FLANGE 00-141-4002NP .313 .563 .110 mounting hole. Cross recess type drive.
Dimensions as follows: Stud Shank Major
Copper Alloy, Black overall with a straight round Steel, Cadmium or Zinc Plated. Diameter .375; Head Diameter .525; Receptacle
type barrel. Dimensions shown in inches. Length overall 1.135, Width .625; Height .625,
C-C distance between Mounting Holes .875, and
A B C Mounting Hole Diameter .100.
01-023-3843 .297 .156 .562
Grip Lg Thk
Copper Alloy, Nickel Plated. 00-406-5478NP .730 .256
ID OD H
A B C
00-282-2045NP .354 .621 .197 FASTENER, PANEL
00-275-4461NP .265 .115 .210
00-369-2721NP* .354 .621 .197
* Steel, Passivated Steel AISI 1137, Cadmium Plated.
Copper Alloy 125 or 105 or 116, Tin Plated.
Steel, Cadmium Plated. .500 inch diameter head, .282 inches long
SPCC HX High Quality Control Items. overall. Number 10-32 UNF thread.
A B C
01-013-9732NP .093 .047 .080 01-043-7885NP
01-013-9733NP .093 .059 .090
FASTENER, SLIDE,
TAPERED ROUND TYPE. OVAL FLANGE INTERLOCKING
Barrel height (A), barrel outside diameter (B), ID OD H
flange outside diameter (C), and barrel largest 00-449-2797NP .344 .625 .188 Aluminum or Copper Alloy or Plastic or Steel.
outside diameter (D), shown in inches. 00-282-7463NP .356 .625 .197
00-550-2335NP .359 .625 .203
00-282-2047NP .359 .621 .197 Medium Heavy Duty.
Straight contour. Slate Gray tape .719 to .812

inches wide, with .750 inch fastener tape
extension length. Stop types, closed
bottom-bridge top. One long tab slider,
Copper Alloy. nonreversible. Automatic locking device. Mildew
and water resistant.
A B C D
00-239-0647NP .145 .180 .285 .190 ID OD H Lg/In.
00-292-8817NP .390 .621 .344 00-232-2057 35.500-36.250
FUNNEL FLANGE, STRAIGHT TYPE. Barrel
height (A), barrel outside diameter (B), and Steel, Cadmium or Chromate Plated. Copper Alloy.
flange outside diameter (C), shown in inches.
Medium Duty Special.
Cadmium Plated slider, Copper Alloy

Dichromate slider pull. Straight contour. Olive
Drab tape .750 inches wide, with .750 inch
ID OD H fastener tape extension length. Stop types,
00-432-9964NP .129 .297 .072 separating unit bottom open top. One short tab,
Copper Alloy, Gold Plated. 00-747-9928NP .488 .621 .197 nonreversible with automatic locking device.
Mildew and water resistant.
A B C Steel, Comp 1118, Cadmium Plated.
Lg/In.
00-861-4114NP .078 .047 .079
00-054-0088NP .086 .030 .059 00-252-5398 11
00-052-2266NP .109 .047 .079 00-007-3295* 24
00-057-5706NP* .162 .047 .075 * Flange type locking device.
* Uncoated
Medium Heavy Duty.
EYELET, TURNLOCK FASTENER Straight contour. Olive Drab tape .750 inch wide,
with .750 inch fastener tape extension length.
For captivating studs to a panel eliminating wear Right hand separation with quick release. Stop
ID OD H
of stud against the panel. types, open top and bottom. Two sliders,
00-980-5642NP .225 .344 .630
nonreversible. One short tab.
2-90
CLASS 5325
.125 Groove Width.
Lg/In. Hole
00-833-9102 30 Dia H Hole Groove
00-231-6582NP .250 .173 Dia Dia
00-231-6619NP .312 .210 00-185-0017 .188 .312
FASTENER, SNAPSLIDE 00-291-0289NP .375 .245 00-582-3601 .311 .562
00-291-0293NP .438 .255 00-795-0719 .500 .812
Steel, CRES with Copper Alloy washer, 00-231-6586NP* .500 .323 00-185-0001 .625 .859
Passivated overall. Flat turned up end latch style 00-231-6587NP .625 .380 00-276-5954 .750 1.060
.050 inches thick by 1.125 inches long overall by * 1 Gross per box 00-184-9858 .438 .688
.437 inches wide. With .187 inch notch diameter. Double row toothed
Indented end latch guide style .468 inch inside .250 Groove Width.
diameter by .250 inches long, with .130 inch
GROMMET, NONMETALLIC Hole Groove
diameter guide hole. Snapslide post style with
.125 inch hole depth, .625 inches long overall, Dia Dia
Plastic Cellulose Acetate Butyrate For drainage 00-276-6056 .750 1.000
.086 inch diameter mounting hole, .125 inch
use AN231-4 spec number..
shank outside diameter, .375 inch head outside
diameter, .075 inches long post shoulder, .113 O/A Thk NON-SPEC COMMERCIAL TYPE ITEMS
inches long post shank. 00-737-0831 1.187 .032
Rubber.
Plastic Polyamide
Round/Solid Style.
00-171-4238NP .750 hole diameter. Groove .078 wide by .875

outside diameter. 1.500 overall height. 1.125
FASTENER, TURNBUTTON Edging style, 12-3/4 maximum length. outside diameter large flange.
SOCKET STYLE, two screw holes, base design, Solid construction. 01-115-8798
on a 7/8 mounting center. Base length and width
H W
shown in inches. .094 Groove Width
00-960-2410 .150 .155
00-926-1394 .220 .155
01-025-4479 .220 .155
00-027-0322* .220 .155
01-032-9365 .406 .375
* Round style Non Spec Hole Groove
Copper Alloy. Dia O/D
Split construction. 00-291-7705 .312 .469
Lg/In. W/In.
H W
01-088-8982NP 1.250 .469 Rubber Natural or Synthetic
00-074-3301 .175 .155
00-923-9512 .325 .230
GROMMET, METALLIC Round/Solid Style.
Rubber, Synthetic.
TAPERED ROUND BARREL .062 Groove Width.
Hot oil, and coolant resistant. 45-50 durometer. Hole Groove
Finished hole diameter after insertion, and barrel Dia O/D
height before crimping, shown in inches. 00-276-4993 .281 .375
FLAT WASHER WITH FORMED INNER EDGE Rubber, Synthetic.
.062 Groove Width. Round/Solid Style.

Hole Groove .046 Groove Width.
Dia Dia
00-286-6047 .125 .250 Hole Groove
00-174-5317 .188 .311 Dia O/D
00-263-6632 .250 .438 00-840-7162 .203 .297
Copper Alloy. 00-174-5315 .250 .750 00-840-7165 .422 .563
00-276-6228 .311 .562
Hole 01-288-7881 .375 .500 .063 Groove Width.
Dia H 00-291-9366 .375 .625
00-291-0302NP .156 .135 00-290-6163 .437 .688 Hole Groove
00-231-6589NP .250 .175 00-276-6100 .500 .812 Dia O/D
00-231-6591NP .500 .374 00-281-1557 .625 .875 01-013-4060* .125 .250
00-276-6091 .688 1.000 00-171-8631* .297 .438
SINGLE ROW, TOOTHED WITH FLANGE 00-276-6343 1.000 1.375 00-811-1970* .328 .406
Copper Alloy, 260 or 268 00-185-0018 1.000 1.875 * Coolant and oil resistant.
2-91
CLASS 5325
.093 Groove Width.
Hole Groove Lg Dia
Hole Groove Dia Dia 00-276-4969NP .281 .156
Dia O/D 00-419-6689 .304 .429 00-202-2407NP .281 .171
00-873-5698 3.375 3.500 00-486-7954NP .297 .156
.095 Groove Width.
.125 Groove Width.
Hole Groove RECEPTACLE, POSITIVE LOCK
Hole Groove Dia Dia
Dia O/D 00-419-6690 .304 .429 Steel, Passivated. Positive lock receptacle. .526
01-011-6587 .187 .468 inches high. Receptive material, .060 inches
00-730-7048* .313 .438 Square/Solid Style. thick, (2) mounting holes: .098 inch diameter,
00-972-8377 .500 .750 .687 center to center.
01-018-7175 .843 1.343
* Coolant and oil resistant. 00-264-2172NP
.133 Groove Width.

RECEPTACLE, TURNLOCK
Hole Groove FASTENER
Dia O/D
00-084-4328* .375 .500 Steel, Cadmium Plated, plain type with mounting
* Coolant and oil resistant .250 hole diameter, .080 deep by .030 Wide holes. Length (A), Height (B), Width (C),
groove, .050 flange thickness, .510 overall Distance between holes (D), given in inches.
.188 Groove Width. height.
Hole Groove 00-503-5897

Dia O/D
00-596-7618* .750 1.062
* Coolant and oil resistant. INSERT, PANEL FASTENER
Aluminum Alloy Chromate or Anodized overall.
.625 Groove Width.
Flush flange insert style. .190 inch Body
diameter, .593 inch flange diameter, .455 inch
overall length. Features potting hole and
furnished with a floating nut. A B C D
00-449-2967NP 1.344 .312 .750 1.000
00-849-4001
Aluminum Alloy, plain type, with mounting holes,
Aluminum Alloy Chromate overall. Flush flange protective cap.
Hole Groove
Dia O/D insert style. .309 inch body diameter, .625 inch
flange diameter and .030 inch thick flange.
00-972-8378* .250 .500 Features grommet and .219 inch panel
01-011-5008* .687 937 thickness.
01-014-4409* .843 1.093
* Coolant and oil resistant
00-704-0704
Split style
CRES, Passivated, .212 inch long Body. .093
1 Inch Groove Width (Split Type).
inch diameter Flange .215 inch diameter by .030
Hole Groove inches thick.
Dia O/D
01-018-7176 1.312 1.812 01-032-6794NP A B C D
01-014-4414* 1.906 2.406 00-675-8900 1.031 .240 .400 .750
* Coolant and oil resistant POST, SNAP FASTENER
Aluminum Alloy, Anodized.
Copper. For permanently fastening a snap
fastener stud to a material.
Hole Groove
Dia O/D
01-027-0930 .219 .437
Black Enameled.
Round/Split Style. A B C D
Lg Dia 00-559-0334NP 1.000 .500 .500 .750
00-250-6858NP .203 .109
00-276-4978NP .281 .156 CRES Steel.
00-281-4359NP .328 .141
A B C D
Nickel Plated. 00-638-8088NP* 1.000 .500 .500 .750
.065 Groove Width. * Red color
Lg Dia
00-484-5478NP .188 .109 Copper Alloy, Cadmium Plated.
2-92
CLASS 5325
Steel stud, Cadmium Plated Retainer. Number.
A B C D 10-32 UNF threads. Lg H W
00-505-4798NP 1.000 .500 .500 .749 00-995-6630NP* .616 .844 .563
00-584-6638NP 1.000 .690 .500 .750 A B C D * With protective cap
00-151-7378NP 1.125 .585 .625 .875
Steel, Composition 1050, Cadmium Chromate RETAINER, TURNLOCK
Plated. Steel, Cadmium and Chromate Treated. 1/4-28
FASTENER EJECTOR SPRING
UNJF threads.
A B C D
00-579-7825NP 1.000 .250 .360 .750 A B C D Steel, Cadmium Plated.
00-924-8233NP 1.295 .771 .600 1.000
Steel, Cadmium Plated, plain mounting.
A B C D
01-014-1330NP .921 .427 .563 .681
01-136-4144NP .937 .562 .437 .687
Steel, Cadmium or Chromate Treated.

H Lg/ID Eye/ID Thk
00-291-9360NP .375 .342 .255 .015
00-904-0873NP* .375 .345 .235 .015
A B C D * Oxide film coated.
00-070-0386NP .875 .515 .386 .687
RING RETAINING
Steel, Cadmium Plated, plain mounting.
Copper Alloy material special flat ring style.
Double oval cross-sectional shape used internal.
ID OD Thk
A B C D
01-237-1177 1.108 1.314 .033
00-209-7885NP 1.250 .625 .625 1.000
Nickel-Copper Alloy with a micro-seal surface
Steel, Cadmium Plated. treatment. Chamfered outside corners
cross-sectional shape. Internal usage, spiral
A B C D round ring style.
00-282-7471NP 1.500 .367 .562 1.000
ID OD Thk
Copper Alloy. 01-139-1544 3.714 4.000 .124
A B C D Steel, Cadmium or Passivated overall. External

00-171-4365NP 1.000 .500 .500 .750 ring style with a rectangular cross-sectional
shape. External usage.
Steel overall, Cadmium Plated.
ID/In. Thk/In.
A B C D
00-818-0872 .393 .025
00-290-3976NP 1.375 .562 .844 1.000 01-135-9617 .666 .050
00-261-3918 .686 .079
Steel, Cadmium Plated. Floating nut mounted 00-804-2027 .864 .042
1/4-28 UNC threads. 00-721-6876 1.153 .050
A B C D 00-051-4887* 1.153 .050
00-663-2215 2.372 .083
00-771-3340NP 1.125 .780 .560 .875 * External inverted lugs, ring style
A B C D Two Lug, Floating style. Steel, Passivated material. Special ring style.
00-432-9810NP 1.438 .485 .312 1.000 Round cross-sectional shape and for external
Steel ejector spring, Aluminum Alloy receptacle. usage.
00-298-7026NP 1.438 .485 .875 1.000
A B C D ID/In. Thk/In.
Aluminum Alloy receptacle, Oxide finish. Steel, 00-036-9305 .625 .281 .375
Cadmium Plated stud. Number 6-32 UNC 00-794-2742 .265 .018
threads. Zinc Alloy, Cadmium and Chromate Treated. Steel, Cadmium or Passivated overall. Spiral ring
style with a double oval cross-sectional shape.
External usage.
ID/In OD/In. Thk/In.
00-285-7967 .050 .640 .025
01-139-4490 .576 .693 .035
01-130-0933 .701 .832 .042
00-815-0870* 1.180 1.350 .050
00-045-1879 1.379 1.614 .050
A B C D * Corrosion Resisting Steel
00-512-7013NP .927 .570 .531 .686
Steel, Passivated material overall. Split ring style
2-93
CLASS 5325
with a round cross-sectional shape. External STUD ASSEMBLY, TURNLOCK
usage. 00-579-8152NP med-duty
00-291-0195NP* med-duty FASTENER
ID/In OD/In. Thk/In. * Zinc Alloy with pin locking feature.
FILLISTER HEAD, CROSS RECESS DRIVE
01-131-3365 1.336 1.591 .125
SOCKET, SNAP FASTENER Steel, Material accommodated THICKNESS
Steel, Zinc Plated overall. Straight gap ring style
with a rectangular cross-sectional shape. and EYELET OUTSIDE DIAMETER shown in
Functions as a female receptacle for a snap inches.
External usage. fastener stud. Dimensions: (A) Major Diameter,
ID/In OD/In. Thk/In. (B) Overall height, (C) Opening Diameter.
00-157-5667 .388 .576 .050
Copper Alloy Barrel.
Steel material, clover ring style with a
rectangular cross-sectional shape. Internal Oxide Film Treated.
usage.
ID/In OD/In. Thk/In.
01-125-0508 .127 .290 .022 Thk Eyelet O/D
00-702-3336NP A/A .247
Steel, Passivated material overall. Hooked wire 00-882-5030NP* .135 .247
ring style with a round cross-sectional shape. 00-409-1865NP* .165 .247
Internal usage. 00-726-6701NP .180 .247
00-775-6436NP .270 .247
ID/In OD/In. Thk/In. 00-045-1933NP .311 .247
01-162-8844 .580 .636 .028 A B C 00-117-4813NP* .360 .247
00-945-2577NP .560 .245 .438 * Passivated
Steel, Cadmium or Passivated overall. Internal Spring secured
ring style with a rectangular cross-sectional Cadmium and Nickel
Nickel Treated.
shape. Washer secured
OD/In. Thk/In. AN227-7B. Steel, Passivated.
00-807-5330 .550 .035
00-810-6492 .833 .035 FILLISTER HEAD, SLOTTED
00-275-6097* 2.707 .078
01-197-3378 3.055 .093
* Beveled one outside corner
cross-sectional shape.
Steel material. Special ring style with a

rectangular cross-sectional shape. Internal
usage. A B C
ID/In. OD/In. Thk/In. 00-285-6250NP .557 .175 .415
Thk Eyelet O/D
00-841-2331 2.604 2.920 .031
Nickel Treated. 00-687-3842 .090 .247
Steel or Passivated Steel material overall. 00-543-3410* .195 .247
A B C * Spring secured
Special flat ring style with double oval
cross-sectional shape. Internal usage. 00-276-4946NP .562 .172 .156
CRES Passivated. With washer securing device.
ID/In. OD/In. Thk/In. Steel, Non-Spec Item.
00-939-0779 1.246 1.415 .043 A B C
01-077-7518 3.630 4.130 .111
00-218-8835NP .402 .143 .295
Steel material. Spiral ring style with a double oval
cross-sectional shape. Internal usage. STOP, INTERLOCKING SLIDE
ID/In. OD/In. Thk/In.
FASTENER
01-077-4980 .454 .544 .025 Open stop type. Black with Oxide film. Closed Thk Eyelet O/D
00-045-1884 11.845 11.095 .086 00-138-6466NP .172 .354
Bottom, Open top.
SLIDER AND PULL, Medium Duty. FILLISTER HEAD, SLOTTED DRIVE

INTERLOCKING SLIDE FASTENER
00-291-0197NP
Short tab, single pull, automatic locking.
Medium Heavy Duty.
00-276-4939NP
Note: Any acceptable color.

Thk Eyelet O/D
00-054-4530NP* .025 .312
* Cadmium
2-94
CLASS 5325
CRES Cadmium and Chromate Treated. Washer Steel, Cadmium and Chromate Treated. Ring
secured. treated.
Thk Eyelet O/D

00-025-0032NP .025 .312 Thk Eyelet O/D
Thk Eyelet O/D
01-079-8205NP A/A .374
00-780-9545NP .165 .525 FILLISTER, WING HEAD
FLAT COUNTERSUNK HEAD, TORQUE SET
Aluminum Alloy, 1100 grommet Cadmium Steel, Cadmium and Chromate Treated. DRIVE
Treated. Steel stud, slotted.
Steel, Cadmium and Chromate Treated.
Thk Eyelet O/D
00-508-8428NP .306 .374
FLAT COUNTERSUNK HEAD, SLOTTED

DRIVE
Thk Eyelet O/D Steel, Cadmium and Chromate Treated.

Thk Eyelet O/D
00-241-7421NP .90 .437
00-282-7458NP* .079 .247
00-449-3026NP .124 .247
FILLISTER, COUNTERSUNK HEAD, CROSS
* Ring secured
RECESS DRIVE
FLAT COUNTERSUNK HEAD, CROSS
Steel, Cadmium spring and pin, Nickel eyelet
RECESS DRIVE
and stud.
Thk Eyelet O/D

00-290-8235NP* .186 .345
00-290-8232NP* .216 .345
00-290-8233NP* .246 .345
00-171-5789NP* .306 .345
00-290-8231NP* .336 .345
Thk Eyelet O/D 00-639-5055NP .486 .345
00-045-1922NP A/A .247 Thk Eyelet O/D * Spring secured
00-045-1950NP A/A .247 00-840-6030NP .456 .345
00-043-0511NP .135 .247 00-172-4210NP* A/A .374 Steel, CRES, Passivated.
00-702-5006NP A/A .247 * Ring secured
00-990-5330NP* .150 .247 Thk Eyelet O/D
* Washer secured Aluminum Alloy eyelet, Dichromate Treated. 00-584-1094NP .126 .345
Steel spring, Passivated. Steel stud, Cadmium 00-059-9061NP* .405 .345
Steel, Cadmium Treated. Treated. 00-027-5947NP .456 .345
00-027-5949NP .576 .345
Thk Eyelet O/D * Washer secured
00-689-8837NP .045 .247
00-703-9346NP* .105 .247 FLAT COUNTERSUNK WING HEAD
00-995-8345NP .210 .247
* Washer secured
With Chromate
Spring secured
Thk Eyelet O/D
Steel, Passivated material overall. Steel, Nickel 00-579-7645NP .179 .374
Treated. 00-672-5835NP* .300 .340
* Ring secured
Thk Eyelet O/D
00-781-4761NP A/A .247 Steel, Cadmium and Chromate Treated. Thk Eyelet O/D
00-957-6637NP* A/A .247
00-423-6781NP .426 .345
* Spring secured Thk Eyelet O/D
00-189-9890NP A/A .374 FLAT FILLISTER HEAD, CROSS RECESS
FILLISTER, COUNTERSUNK HEAD, 00-241-7192NP* A/A .374
SLOTTED DRIVE, WITH LIFTING RING DRIVE
00-508-8426 .185 .374
00-550-0045NP .409 .374 Steel, Cadmium Treated.
Steel, Cadmium or Zinc Treated. SPECIAL * Ring secured
FEATURE: With lifting ring attached. 1.125 inch
long. by .875 inches high .104 inch diameter.
2-95
CLASS 5325
Thk Eyelet O/D Thk Eyelet O/D
* Chromate treated 00-701-9695NP .105 .247
00-804-9642NP .120 .247
FLAT FILLISTER WING HEAD 00-781-1251NP .150 .247
00-067-5716NP .358 .247
Steel, Cadmium and Chromate Treated. 00-781-1252NP* .424 .247
00-954-8795NP A/A .247
* Without Chromate treatment, ring
Thk Eyelet O/D secured.
00-726-6699NP .090 .247
00-726-6700NP* .150 .247 CRES, Comp 302 or 305
00-054-5044NP .225 .247
Thk Eyelet O/D
00-866-3810NP* .240 .247
00-687-5689NP .255 .247 00-819-7378NP .075 .247
00-921-3848NP .330 .247 00-787-8677NP .210 .247
Thk Eyelet O/D
* Washer secured
RES, Passivated 00-298-7003NP .090 .247 Steel, Cadmium and Chromate Treated.
Nickel Plated 00-298-7007NP .150 .247
00-639-5575NP* .240 .247
* Washer secured
FLAT FILLISTER HEAD, SLOTTED DRIVE
LOOP ON BELL HEAD
Steel, Passivated. Spring secured.
Steel, Cadmium and Chromate Treated. Washer
secured.
Thk Eyelet O/D

00-639-0561NP .125 .345
00-639-7954NP .155 .345
00-369-2714NP .186 .345
00-369-2716NP .245 .345
Thk Eyelet O/D 00-414-4738NP* .285 .345
* Washer secured
00-584-0024NP .075 .247
00-550-0711NP* .240 .247
STUD HEAD, HI-TORQUE RECESS DRIVE
* Washer secured
Aluminum Alloy receptacle, Copper Alloy eyelet. Steel, Cadmium and Chromate Treated, washer
Thk Eyelet O/D
Black color. secured.
00-945-6427NP .941 .345
Thk Eyelet O/D
Steel, Passivated. 00-508-8377NP .215 .345
00-508-8367NP .335 .345
Thk Eyelet O/D
00-943-5493NP .165 .247 STUD HEAD, SLOTTED DRIVE
STUD HEAD, CROSS RECESS DRIVE
Thk Eyelet O/D Steel, Cadmium and Chromate Treated. Thk Eyelet O/D
01-229-0315 .064 .375 00-298-7022NP* .576 .345
00-085-4124NP .680
Aluminum Alloy head and receptacle, Anodized. * Chromate treated, washer secured.
Steel lockspring and stud, Cadmium Plated.
STUD HEAD, TORQUE SET DRIVE
Thk Eyelet O/D
00-017-6414NP A/A .375 Steel, Cadmium and Chromate Treated.
FLAT FILLISTER, COUNTERSUNK HEAD, Thk Eyelet O/D

CROSS RECESS DRIVE 01-139-6528NP A/A .345
Spring secured. 01-134-5907NP A/A .345
Steel, Cadmium Treated. 00-508-8376NP .401 .345
Thk Eyelet O/D
00-799-1019NP .276 .419 STUD HEAD, TORQUE SET RECESS DRIVE
Steel, Cadmium and Chromate Treated. Washer

secured.
Thk Eyelet O/D
00-508-8848NP .855 .247
Thk Eyelet O/D
00-902-7355NP* A/A .246
01-048-9669NP .765 .246
2-96
CLASS 5325
STUD, POSITIVE LOCK Copper Alloy, Nickel Coated. Number 8-32 UNC Steel, Cadmium and Chromate Treated. Ring
screw base retention. Stud shank length (A). secured.
Steel, Cadmium Plated. Stud head/shank style. Stud overall length (B). Stud head diameter (C),
Head diameter .625 inches. Undercut diameter in inches.
.365. Major diameter .130 inches long. Undercut
.172 inch long end. .383 inches long overall. Stud
shank 1.130 inches high, overall, with 1/4-28
UNF threads. SPECIAL FEATURE: .070 inches
wide by .055 inch deep slot.
Thk/In. Dia/In.
00-774-9430NP 00-909-9659NP .155 .217
FILLISTER HEAD. CROSS RECESS DRIVE

STUD, SNAP FASTENER A B C
00-276-4930 .375 .562 .391 Steel, Cadmium and Chromate Treated.
Copper Alloy overall. For inserting into a snap
fastener socket, serving as the male end of a
snap fastener. Oxide film or Black dip finish. .359 STUD, TURNLOCK FASTENER
body length, .375 stud shank length, .875 overall
length. .344 width across flats. Screw base FILLISTER HEAD, SLOTTED DRIVE
Number 8-32 UNC threads.
Thk/In. Dia/In.
00-053-0252NP .138 .300
Steel, Oxide Film Coated.

00-276-5867NP
Nickel Treated. Steel, Cadmium Plated.

Thk/In. Dia/In.
Dimensions: (A) Overall length. (B) Base
00-281-1553NP .055 .212
diameter in inches.
00-489-1050NP .078 .188
00-281-5081NP .085 .215
00-515-9155NP* .106 .308 Thk/In. Dia/In.
00-281-5078NP .114 .215 00-550-9596NP* .087 .313
00-283-0090NP .135 .215 00-844-3763NP .276 .125
00-770-9340NP .135 .309 * Cadmium plated
A B 00-281-6212NP .155 .215
00-276-5876NP .141 .484 00-419-4471NP* .175 .185
FILLISTER HEAD, FLAT. SOCKET DRIVE
00-174-2923NP .231 .562 00-281-1922NP .165 .308
00-901-9660NP* .941 .281 00-291-0365NP .182 .247
00-281-1552NP .195 .306 Steel. Ring secured.
* Oxide film treated
00-281-5070NP .265 .217 Thk/In. Dia/In.
Nickel Treated, with screw base retention. 00-285-2804NP .287 .310
01-303-8180NP .326 .560 01-173-0381NP A/A .503
Dimensions: (A) overall length, (B) stud base
diameter in inches. 00-821-4253NP .356 .373
00-290-2907NP .377 .188 Steel, Corrosion Resisting.
00-151-5915NP* .465 .308
Thk/In. Dia/In.
00-762-6388NP .485 .366
* Grommet secured 00-298-6550NP A/A .434
Ring secured
Cadmium and Chromate FILLISTER HEAD, SLOTTED DRIVE
Oxide film- Screw base retention.

A B
00-842-1879NP .171 .562
A B
00-838-1787 .171 .562 Steel, Cadmium Plated.
Thk/In. Dia/In.
Thk Dia Grip/Lg
Enamel finish, Eyelet retention. 00-066-8691NP A/A .337
00-969-4502NP* A/A .187 .445
A B 00-976-5268NP .126 .187 .520
FILLISTER HEAD, CROSS RECESS DRIVE
00-276-4934NP .172 8B * Ring secured
Thk Dia Grommet secured
Oxide film or Black finish or dip. Clinch retention. 00-641-2987NP .435 .215
00-543-2418NP* .064 .337 CRES, Zinc and Chromate Treated. Ring
A B secured.
* Slot drive
00-276-4908NP .203 .555
2-97
CLASS 5325
Thk/In. Dia/In. Dia Stud/Dia
* Grommet secured 01-015-6956NP* .220 .281
* Washer secured
FLAT COUNTERSUNK HEAD, SLOTTED
DRIVE
Thk Dia Grip/Lg
01-170-8578NP .160 .160 .345
Steel, Aluminum Treated. Ring secured.

Thk Dia Grip/Lg
Thk/In. Dia/In.
00-806-9864NP .260 .290 .520
00-838-8576NP .340 .290
FILLISTER HEAD, FLAT COUNTERSUNK 01-132-3503 .155 .264
HEAD OR SLOTTED DRIVE
FLAT COUNTERSUNK HEAD, CROSS
Shank
RECESS DRIVE Thk Dia Grip/Lg
00-057-6367NP .055 .214 .290
Steel, Cadmium Plated. Grommet or ring
01-065-9787NP .115 .308 .420
secured. 01-065-6939NP .135 .308 .440
01-068-6411NP .165 .308 .470
00-282-1901NP .165 .374 .530
00-282-8131NP .172 .185 .305
Steel, Passivated. Ring secured. 00-282-1903NP .225 .374 .590
00-141-7134NP .255 .374 .620
Shank 00-702-3375NP .265 .311 .570
Thk Dia Grip/Lg 00-702-3376NP .276 .308 .590
00-115-6358NP .364 .248 .178 Shank 00-619-7044NP .285 .374 .650
00-942-5223NP .364 .248 .296 Thk Dia Grip/Lg 00-226-7582NP .360 .372 .690
00-151-5912NP* .345 .308 .650
01-068-6412NP .500 A/A .376
FILLISTER COUNTERSUNK HEAD, CROSS 01-068-7503NP .500 A/A .376 00-282-8132NP .350 .184 .350
RECESS DRIVE 01-099-0352NP .355 .371 .720
01-048-0127NP .365 .214 .600
01-246-3978NP .365 .308 .680
00-616-3851NP .375 .311 .680
00-210-2242NP .375 .372 .625
00-151-5914NP* .435 .308 .740
00-414-4871NP .455 .308 .760
* Grommet secured
Ring secured
Thk/In. Dia/In. Steel, Passivated. Ring secured.
00-544-4505NP .117 .298
FILLISTER COUNTERSUNK HEAD, SLOTTED Shank

DRIVE Dia Dia Grip/Lg
01-069-2778NP .524 .377 .145

Shank
Thk Dia Grip/Lg
00-281-1553NP .035 .214 .270
FILLISTER WING HEAD FLAT COUNTERSUNK HEAD, SLOTTED

DRIVE
Dia Stud/Dia Steel, Cadmium and Chromate Treated.

00-601-7292NP .192 .125
Shank
Thk Dia Grip/Lg
Steel, CRES, Passivated. Material
accommodated .095 - .125 for all items. 01-191-2598NP .186 .265 .392
01-190-7653NP .206 .265 .412
01-266-2606NP .266 .267 .502
Steel, Cadmium Plated. 01-190-7654NP .276 .265 .482
01-190-7655NP .286 .265 .492
Thk/In. Dia/In.
01-191-7559NP .306 .265 .512
00-291-0320NP .135 .312 01-190-7656NP .316 .265 .544
00-281-6210NP* .145 .215 01-194-9318NP .386 .265 .592
00-721-5503NP .145 .309
01-191-7558NP .275 .248 Steel Composition, Cadmium Treated.
2-98
CLASS 5325
Shank Shank
Thk Dia Grip/Lg Thk Dia Grip/Lg
01-229-8280NP .016 .215 .260 01-171-5954NP A/A .374 .250
00-151-5910NP .316 .308 .620 00-115-6365NP .295 .248 .297
00-497-0726NP .256 .248 .290
Steel, Corrosion Resisting, Passivated. Socket 01-042-2999NP .256 .374 .290
drive. 01-204-5518NP A/A .374 .312
00-918-8519NP A/A .249 .333
Shank 00-497-0756NP .322 .248 .360 Shank
Thk Dia Grip/Lg 01-173-0382NP A/A .374 .375 Thk Dia Grip/Lg
01-184-2045NP .313 .375 .842 00-497-0770NP .396 .248 .430 01-118-0935NP* .125 .214 .445
01-191-6400NP .485 .248 .531 01-010-2643NP .396 .374 .430 * Spring secured
01-119-9022NP A/A .248 .343 00-767-5997NP .436 .248 .500
01-119-9024NP A/A .248 .718 00-497-0697NP .436 .374 .500
01-175-1082NP A/A .374 .500
FLAT COUNTERSUNK HEAD, SOCKET DRIVE 00-733-7174NP A/A .374 .562
00-767-5998NP .534 .249 .570
00-222-1568NP .606 .248 .640
00-767-6007NP .746 .248 .780
Steel, Cadmium Plated. Ring secured. Steel, Cadmium and Chromate Treated.
Shank
Thk Dia Grip/Lg
00-575-6105NP A/A .217 .468
Iron Alloy, Passivated. Ring secured. FLAT FILLISTER, SOCKET DRIVE

Shank
Thk Dia Grip/Lg Shank Steel, Aluminum Treated. Ring secured. 1/4-28
Thk Dia Grip/Lg UNF threads.
01-303-0980NP .187 .375 .187
00-026-3756NP .536 .248 .536
Steel, Aluminum Treated. Ring secured.
FLAT FILLISTER, KNURLED DRIVE
Shank
Thk Dia Grip/Lg
01-186-3520NP A/A .312 .250
01-185-2902NP A/A .375 .437
01-204-5517NP A/A .375 .562
Shank
Thk Dia Grip/Lg
Steel, Cadmium and Chromate Treated. Ring
secured. 01-131-3045NP A/A .374 .562
Shank Shank
Thk Dia Grip/Lg Thk Dia Grip/Lg
00-497-0724NP .185 .248 .220 01-216-9635NP A/A .246 1.770
01-010-2640NP .185 .374 .220
01-129-0740NP .250 .374 .250 FLAT FILLISTER, SLOTTED DRIVE
2-99
2-100
Phone (215) 737-2336
DSN 444-2336
CLASS 5330
PACKING AND GASKET MATERIALS
ASBESTOS SHEET, COMPRESSED

Thk
Rubber-bonded, compressed. Asbestos sheet. For marine and general 00-585-0615 1/4
ship use at temperatures to 700 degrees Fahrenheit. 50 inches by 50
inches sheet size. MEDIUM CORK Composition. 100 PSI tensile strength. For general
purpose oil pans gasketing, cover plates, and gear cases. Mildew Resistant
COATED GRAPHITE, both sides. Tensile strength not rated. Treatment.
Thk Thk
01-396-1328 3/16 00-178-9791 1/32
00-178-9792 1/16
00-178-9793 3/32
UNCOATED GRAPHITE. Minimal tensile strength 3500 PSI, except where
00-178-9794 1/8
noted.
00-178-9795 3/16
Thk 00-178-9796 1/4
01-363-0621 3/32
HEAVY CORK Composition. 175 PSI tensile strength for transformers and
other oil filled electrical equipment and packing or bearing seals for rotating
HYDROCARBON FUELS use. Suitable for high temperature uses in
members. Untreated.
aircraft, and in diesel engines. Minimal tensile strength 2000 PSI, except
where noted. Thk
Thk W Lg 00-959-4718 1/8
00-585-0616 1/8
00-530-3526* 1/16 40 42
* Tensile strength not rated, petroleum and water resistant.
FELT, MECHANICAL, PREFORMED
CORK AND RUBBER SHEET
STYLE B1 circular. Wool material overall G3 rectangular cross section
inside diameter (ID) and outside diameter (OD) listed in inches.
Vulcanized Cork material; Synthetic Rubber binned. For gasket where
resistance to aromatic fuel and oil is required. Furnished in 36 by 36 inch ID/In. OD/In.
sheets. Grade as shown. 00-171-9974 1/8 5/16
00-729-6537 5/32 5/16
SOFT CORK; Grade A applications. 00-599-8249 9/32 1/2
00-607-3873* 11/32 5/8
Thk
* For use on teletype and facsimile equipment.
00-514-6014* 1/32
01-037-9351 1/4 STYLE B14 circular. Cotton material overall Adhesive impregnated. G23
* Non Spec Item circular cross section. Inside diameter 13/37 inches. Outside diameter
39/64 inches. For use on telephone and telegraph equipment.
MEDIUM CORK; Grade B applications.
Thk 00-125-8116
00-297-1986 1/16
00-184-8458 1/8 STYLE B27 rectangular. Wool material 12R1 overall Cross sectional
square shape 1/4 inches thick, 1/4 inches high, and 60 inches in length.
FIRM CORK; Grade C applications.
00-292-0012
Thk
00-297-1071 1/32 STYLE B29 Square. Wool material overall. G36 square cross section.
00-291-9598 1/8 Approximately 3.8 inches thick and 5/8 inches high. Used on teletype and
00-291-9597 1/16 facsimile equipment.
00-297-1073 3/16
00-370-0635
CORK SHEET
FELT SHEET
Protein bonded Compressed Cork. Approximately 36 inches long and 12
inches wide. For use as indicated below. Basic Wool, mildew resistant felt material. Mechanically rolled, not woven.
Classes and forms as shown below.
LIGHT CORK Composition 70 PSI tensile strength. For cushioning and
gaskets between glass or porcelain and metal. Untreated. CLASS 9R4 PAD FORM. Gray both sides. For sound deadening, chassis
strips, spacers, dust shields, pedal pads, dash liners, and for mechanical
2-101
CLASS 5330
purposes where abrasion and wear are not important factors. 3/16 inches Inside diameter (ID) and outside diameter (OD) and cross sectional
thick by 72 inches wide. thickness (Thk) are listed in inches. Non-Spec Item.
00-261-8493 CROSS SECTION
STYLE B1 SHAPE F-3

CLASS 12R1 STRIP FORM. White both sides. For dust shields, wipers,
grease retainer washers, wicks, vibration mountings, and uses where a
resilient felt is required. 1/8 inch thick by 60 inches wide.
00-261-8496
CLASS 16R3 STRIP FORM. White both sides. For ammunition

components. Also for aircraft applications; between rocker arm covers of
engines, ring cowlings, radio cushion strips, retaining and feeding oil under ID/In. OD/In. Thk/In.
difficult conditions, washers and bushings. 3/16 inches thick by 60 inches 01-044-0690 2.969 3.281 .031
wide.
F-9 METAL with FILLER
00-261-8483
STYLE B1 CIRCULAR
GASKET
F-9 metal cross section of Copper composition with a soft Asbestos filler.
NOTE: All items under this item name, GASKET, are listed Pressure rated to approximately 200 PSI. Inside diameter (ID) and outside
numerically by the cross sectional Style and Shape starting diameter (OD) and cross sectional thickness (Thk) are listed in inches.
applies except where noted.
with Styles B1 and continuing through B24, with
subdivisions by Shapes beginning F-2 and ending F-52. CROSS SECTION
STYLE B1 CIRCULAR GASKETS STYLE B1 SHAPE F-9
F-2 METAL
STYLE B1 CIRCULAR
F-2 metal cross section shape. Steel overall. Center to center distance .062
inch. Gage thickness .019 inch. Inside diameter (ID) and outside diameter
(OD) and cross sectional thickness (Thk) are listed in inches. ID/In. OD/In. Thk/In.
01-466-2419* .188 .438 .078
CROSS SECTION
00-229-4047 .562 1.000 .078
00-640-9966 1.062 1.484 .078
STYLE B1 SHAPE F-2
01-374-4524* 3.250 3.750 .078
* Non Spec Item
F-11 METAL and ASBESTOS
STYLE B1 CIRCULAR
F-11 metal with Asbestos. Metal composition as indicated below with a

ID/In. OD/In. Thk/In. folded Asbestos filler. Inside diameter (ID) and outside diameter (OD) and
cross sectional thickness (Thk) are listed in inches. Non-Spec Items.
00-246-9926 1.391 2.062 .031
00-199-0014 2.500 3.312 .031 CROSS SECTION
F-2 metal cross section of material composition as listed below. Inside STYLE B1 SHAPE F-11
diameter (ID) and outside diameter (OD) and cross sectional thickness
(Thk) are listed in inches. Non-Spec items.
ID/In. OD/In. Thk/In. Comp
00-958-6485 1.500 2.000 .047 Nickel
01-044-6482 2.469 3.000 .031 Iron
STYLE UNKNOWN
ID/In OD/In. Thk/In. Comp/In.
F-2 metal cross section of unknown material. Center to Center distance 00-904-6346 .125 .625 .010 Aluminum
.062 inch. Cross section Thickness .025 inch. overall length and width
2.180 by .625 inches with a .440 inch inside diameter. Non-Spec Item. F-15 METAL with FILLER
00-739-9315 STYLE B1 CIRCULAR
F-3 METAL F-15 Copper cross section with soft Asbestos filler. Pressure rated to 200
PSI. For temperatures to 150 degrees Fahrenheit. Inside diameter (ID) and
STYLE B1 CIRCULAR outside diameter (OD) and cross sectional thickness (Thk) are listed in
inches.
F-3 metal cross section of Iron material overall. 18 corrugations per inch.
2-102
CLASS 5330
CROSS SECTION ID/In. OD/In. Thk/In.
* Lead surface treatment
STYLE B1 SHAPE F-15 Copper Alloy 110/AMS 4500
IRON, Non-Spec Items.

00-375-6986 .250 .500 .031
00-375-6989 .328 .438 .031
00-603-6798 3.020 3.498 .500
ID/In. OD/In. Thk/In. 01-038-2503 3.781 4.719 .031
00-825-8888 1.062 1.500 .093 LEAD, Non-Spec Items.
00-599-4140 1.500 2.000 .094
01-419-7788 4.125 4.438 .078 ID/In. OD/In. Thk/In.
01-046-0440 5.625 6.750 .031
F-21 RECTANGULAR METAL
NICKEL, Non-Spec Items.
STYLE B1 CIRCULAR
F-21 rectangular metal cross section. Inside diameter (ID) and outside 00-777-5503 ..734 1.000 .031
diameter (OD) and cross sectional thickness (Thk) are listed in inches. 00-338-4028 1.375 1.730 .025
CROSS SECTION STEEL, Non-Spec Items. Corrosion Resisting.
STYLE B1 SHAPE F-21 ID/In. OD/In. Thk/In.

00-899-1493 2,048 2.370 .020
F-25 METAL
STYLE B1 CIRCULAR
F-25 metal cross section of Steel composition 321 overall. AMS 5576.
COPPER Some Silver precious material. Special features include inside diameter
groove depth of .045 inch nominal. Inside diameter (ID) and outside
ID/In. OD/In. Thk/In. diameter (OD) and cross sectional thickness (Thk) are listed in inches.
00-196-6696 .448 .678 .050 CROSS SECTION
00-914-0876 .531 .750 .031
00-194-0925 .625 .875 .031 STYLE B1 SHAPE F-25
00-952-6861 .750 .938 .062
00-829-9930 .750 1.015 .060
00-193-9807 .766 1.000 .062
00-952-6862 .812 1.000 .062
00-641-8366 .871 1.093 .031
00-432-4226 1.000 1.250 .031
00-952-6860 1.094 1.281 .031
00-952-6629 1.250 1.500 .062
00-952-6628 1.312 1.562 .062
00-599-5353* 1.313 1.625 .031 ID/In. OD/In. Thk/In.
00-952-6630 1.312 1.625 .031 01-058-4590 .792 .814 .062
00-980-5094 1.766 2.000 .031 01-058-5324 .980 1.002 .094
01-021-6895 1.781 2.188 .031
00-584-1419 2.094 2.406 .062 F-33 SOLID SINGLE NONMETALLIC
00-599-4847 22.175 25.295 .080
* Tempered, cold rolled
STYLE B1 CIRCULAR
COPPER, Non-Spec Items.
F-33 Solid Single or nonmetallic material cross sections. Listed
ID/In. OD/In. Thk/In. alphabetically by material composition. Inside diameter (I D) and outside
00-290-1056 .296 .500 .062 diameter (OD) and cross sectional thickness (Thk) are listed in inches.
00-247-7568* .406 .625 .015 Style as indicated.
00-603-2259 .406 .625 .031 CROSS SECTION
01-071-8176 .448 .675 .051
00-912-9190 .510 .740 .052 STYLE B1 SHAPE F-33
00-839-5866 .562 .875 .064
00-051-6066 .562 1.000 .031
00-112-7220 .594 .688 .031
00-641-4167* .641 .875 .035
01-017-2504 1.765 2.115 .013
00-908-6843* 3.500 4.000 .016
01-044-2864 4.562 5.062 .031
01-008-6847* 4.656 5.000 .063
01-033-9093 4.661 5.111 .065 ASBESTOS
2-103
CLASS 5330
ID/In. OD/In. Thk/In. ID/In. OD/In. Thk/In.
00-591-4900* .406 .625 .031 00-422-2535 1.125 1.344 .031
00-297-7364 1.156 1.438 .031 01-044-7515 1.254 1.499 .050
00-591-4898* 1.484 1.750 .031 00-562-3440 1.281 1.562 .031
00-687-8559** 1.562 1.938 .031 01-042-8879 2.670 3.260 .031
00-812-2928* 1.665 1.975 .032
01-374-3315* 4.070 4.600 .032 RUBBER.
00-290-7860* 4.625 5.135 .062
* Non Spec Items ID/In. OD/In. Thk/In.
00-186-1469 .188 .380 .094
ASBESTOS, NICKEL-CHROMIUM, IRON. 00-291-4688 .250 .531 .156
00-006-0759 .390 .750 .050
ID/In. OD/In. Thk/In. 00-847-4890 .390 .750 .060
01-091-1013 1.875 2.250 .125 01-078-8859 .436 .571 .060
00-282-6129 .453 .641 .156
ASBESTOS and RUBBER. 00-625-8020 .625 .812 .062
00-285-9656 .625 .817 .114
ID/In. OD/In. Thk/In. 00-610-5325 .687 .937 .062
01-442-1183 .562 .780 .031 01-040-4793 .750 1.000 .125
00-251-4418 1.000 1.250 .031 01-216-8806 .750 1.000 .156
00-975-7207 1.719 2.125 .062 00-053-0692 .750 1.125 .312
00-763-9651 10.625 11.125 .125 00-202-4315 .781 1.007 .161
00-814-9196* 797 1.062 .147
ASBESTOS with SYNTHETIC RUBBER BINDER. 00-291-2750 .875 1.125 .062
01-049-3960 .875 1.250 .050
ID/In. OD/In. Thk/In. 00-291-4604 .938 1.188 .094
00-297-6119 1.844 2.141 .062 00-291-7895 1.500 1.750 .188
00-763-9651 10.625 11.125 .125 00-292-2184 1.500 1.812 .062
00-803-1302 1.500 1.875 .125
CORK. 01-092-0259 1.500 1.875 .125
00-905-9544 1.500 3.375 .125
ID/In. OD/In. Thk/In. 00-640-9743 1.531 1.760 .161
00-781-5642 .531 .937 .062 00-239-1873 1.562 2.500 .125
00-291-6741 2.375 3.438 .156 00-890-3412 2.070 2.490 .062
00-290-7998 3.062 3.656 .125 00-105-4168 2.375 2.671 .312
01-021-6724 5.120 5.750 .120 00-298-0122 2.500 3.062 .188
00-818-9616 2.562 3.000 .128
FABRIC. 00-239-1877 2.562 3.188 .188
00-246-2914 2.562 3.250 .188
ID/In. OD/In. Thk/In. 00-297-6117 2.734 3.062 .875
01-008-6848 3.380 3.750 .030 00-812-7815 2.750 3.300 .039
00-239-1879 3.062 3.688 .094
FIBER. 00-484-6277 3.270 3.520 .062
00-469-8334 3.406 3.640 .210
ID/In. OD/In. Thk/In. 00-202-3731 3.438 3.938 .250
00-828-2035 .188 .438 .062 00-846-9841 3.465 3.691 .125
00-599-8182 .750 1.000 .015 00-143-7054* 3.562 4.062 .062
00-868-4852 .781 1.000 .062 01-004-4872 3.630 3.870 .134
00-641-4439 2.125 2.750 .062 00-297-7311 3.786 3.875 .125
00-421-4848 4.000 4.500 .062
LEATHER. 00-247-3631 4.062 4.875 .188
00-959-0296 4.062 4.938 .109
ID/In. OD/In. Thk/In. 00-776-7182 4.250 4.625 .188
00-914-4093 .754 1.000 .062 01-144-1019 4.938 5.438 .250
00-290-9933 4.938 5.438 .250
PAPER. 01-119-2011 5.000 5.750 .120
01-068-7379 5.938 6.438 .250
ID/In. OD/In. Thk/In. 00-843-1156 7.470 7.844 .281
00-779-6260 1.625 1.969 .031 00-126-8426 7.750 8.250 .250
00-247-7817 1.750 2.312 .125 00-247-3628 7.875 8.625 .375
00-255-6475 4.125 4.500 .125 00-250-5865 9.812 10.562 .375
00-752-8546 11.625 12.000 .062 01-377-9853 10.500 13.000 .031
00-250-5838 10.688 10.922 .172
01-022-5632 15.000 16.500 .250
PLASTIC.
* Silicone Rubber material
01-052-2340 .125 .250 .032 CRES STEEL.
01-125-0938 .312 .625 .010 ID/In. OD/In. Thk/In.
00-956-8465 .502 .622 .045
01-025-4408 .531 .750 .031 00-810-8134* 1.312 1.594 .031
00-006-4757 .564 .684 .045 * Passivate overall
00-966-0502 .570 2.250 .032
01-017-3927 .755 .995 .156
2-104
CLASS 5330
STYLE B1 CIRCULAR 00-618-9479 .565 .691 .064
01-009-7223 1.005 1.127 .062
F-35 metal alloy with a soft Asbestos filler. All metal alloy outer layers are 01-017-1535 1.185 1.380 .098
listed alphabetically. Inside diameter (ID) and outside diameter (OD) and 01-009-7225 1,255 1.377 ,063
cross sectional thickness (Thk) are listed in inches. 01-009-6741 1.505 1.627 .062
00-618-9476* 1.875 2.064 .094
CROSS SECTION 01-009-6742 1.880 2.000 .062
00-848-8952* 2.062 2.250 .094
STYLE B1 SHAPE F-35 00-883-5929 2.062 2.250 .094
01-009-7224 2.130 2.250 .062
00-843-3137 2.312 2.565 .126
01-023-9140 2.429 2.617 .094
01-017-1534 2.560 2.755 .098
00-113-6215 2.751 3.002 .126
00-061-9104* 2.937 3.125 .094
00-045-9025 3.063 3.252 .093
01-065-5958 4.063 4.252 .094
* Steel composition unknown.
ALUMINUM and ASBESTOS.
ID/In. OD/In. Thk/In. F-52 METAL and ASBESTOS
00-290-9884 .633 .877 .094
STYLE B1 CIRCULAR
COPPER with ASBESTOS.
F-52 Steel and Asbestos material cross section.
00-298-5555 .438 .688 .094 STYLE B5A OVAL GASKETS
01-355-3686 .508 .742 .093
01-354-7733 .570 .805 .094 F-33 SOLID SINGLE NONMETALLIC
00-298-5594* .570 .868 .078
01-354-2531 .625 .875 .094
01-375-2901 .750 .938 .078 STYLE B5A OVAL
00-883-8220 .820 1.055 .093
01-352-3132 1.133 1.367 .093 F-33 solid single or nonmetallic composition cross sections. Listed
00-866-0660 2.319 2.554 .093 alphabetically by material composition.
* Non Spec Item
CROSS SECTION
F-39 HOLLOW
STYLE B5A SHAPE F-33
STYLE B1 CIRCULAR
F-39 hollow metal cross sections. Listed alphabetically by Material

compositions as indicated.
CROSS SECTION
ASBESTOS. Sixteen (16) holes irregularly spaced around gasket. For use
STYLE B1 SHAPE F-39 on an Ice Plant Ammonia Compressor Assembly.
W/In. Lg/In. Thk/In. Sfc.W/In.
00-374-3251 7.250 13.625 .062 .844
CELLULOSE.
W/In. Lg/In. Thk/In. Sfc.W/In.
00-847-6222 3.240 6.840 .120 .500
IRON.
GRAPHITE. F33 solid single or composition nonmetallic material. B29
square.
00-727-7010 2.124 2.312 .094
00-239-3603 2.312 2.500 .094 Lg/In. Thk/In.
00-004-1153 2.562 2.750 .094 01-383-8033 50.0 0.031
00-004-1155 3.375 3.625 .125 01-383-8033 50.0 0.01
NICKEL. GRAPHITE and STEEL. F33 solid single or composition nonmetallic
ID/In. OD/In. Thk/In. material. B29 square.
00-395-1288 .876 1.000 .062 Lg/In. Thk/In.
01-026-8975 .881 1.005 .065 01-392-2760 50.0 0.062
STEEL COMPOSITION 321, Corrosion Resisting Steel composition 321.
Rubber Butadiene-styrene class SBR overall. 45 shore durometer
ID/In. OD/In. Thk/In. hardness rated. Design control Reference, K1-0103-999501ACT1PC16.
01-009-7221 .500 .565 .036
2-105
CLASS 5330
W/In. Lg/In. Thk/In. Sfc.W/In. Aperture Overall No.
00-064-8577 19.990 37.990 .688 1.005 W/In. Lg/In. W/In. Lg/In. Thk/In. Holes
00-844-1696 3.031 7.031 4.219 8.219 .035 8
STYLE B12 NON-CIRCULAR GASKETS 00-844-1695 4.531 6.031 5.719 7.219 .035 8
00-844-1692 4.531 15.031 5.719 16.218 .035 14
F-33 SOLID SINGLE NONMETALLIC 00-838-8779 6.562 10.062 7.688 11.188 .035 16
00-844-1697 7.531 21.656 8.719 22.844 .035 20
STYLE B12 NON-CIRCULAR 00-844-0752 8.031 9.031 9.219 10.219 .035 12
00-846-4680 8.500 14.000 9.718 15.218 .045 16
00-844-1694 8.531 19.031 9.719 20.219 .035 20
F-33 solid single or nonmetallic composition cross sections. Listed
00-844-0753 9.156 10.031 10.344 11.219 .035 14
alphabetically by material composition.
00-844-1693 12.281 13.156 13.469 14.344 .035 18
CROSS SECTION
STYLE B13 NON-CIRCULAR GASKETS
STYLE B12 SHAPE F-33
F-33 SOLID SINGLE, NONMETALLIC
STYLE B13 NON-CIRCULAR
F-33 solid single or composition nonmetallic material cross section.

CROSS SECTION
ASBESTOS. STYLE B13 SHAPE F-33
Aperture Overall No.
W/In. Lg/In. W/In. Lg/In. Thk/In. Holes
00-090-9621 3.375 3.375 4.250 4.250 .031 4
00-066-5799 4.000 7.000 6.000 9.000 .062 8
00-297-5024 9.500 18.125 11.250 19.875 .062 16
CORK.
Aperture Overall No. ASBESTOS.
W/In. Lg/In. W/In. Lg/In. Thk/In. Holes
00-641-1993 1.250 1.875 1.938 2.625 .062 4 Aperture O/A No.
00-425-5142 3.250 5.250 4.500 6.500 .125 unk Dia/In. W/In. Thk/In. Holes
00-970-0059 7.750 25.188 8.500 25.938 .188 unk 00-892-1764* .844 2.328 .031 2
00-377-2188 8.812 12.688 9.750 13.625 .312 unk 00-989-3295 1.060 2.822 .031 2
00-246-0233 1.125 3.750 .031 2
COTTON and RUBBER. 00-110-3604* 1.687 2.875 .063 2
* Asbestos with Rubber
Aperture Overall No.
W/In. Lg/In. W/In. Lg/In. Thk/In. Holes CORK.
01-004-4906 31.500 5.500 33.500 7.750 .063 38
Aperture O/A No.
RUBBER. Dia/In. W/In. Thk/In. Holes
01-024-8141 .516 1.562 unk 2
Aperture Overall No. 00-542-0926 1.062 2.500 .031 2
W/In. Lg/In. W/In. Lg/In. Thk/In. Holes 01-085-3262 2.250 4.375 .062 2
01-076-3206 .700 .900 9.000 11.500 .125 16
00-239-7985 3.626 3.688 4.250 4.312 .188 unk PAPER.
01-130-7335 3.656 4.156 4.656 5.156 .032 12
00-726-1638 4.000 18.000 5.000 19.000 .188 unk Aperture O/A No.
Dia/In. W/In. Thk/In. Holes
F-38 CLOTH and RUBBER, NONMETALLIC 00-844-2907* 1.125 2.680 .016 2
00-105-3236 2.562 4.000 .031 2
STYLE B12 NON-CIRCULAR * Cellulose material
RUBBER. Chloroprene class CR overall. Approximately 50 shore

F-38 cloth and Rubber nonmetallic cross section. 50 shore durometer
nominal hardness. durometer. Hardness rated. Bolt circle diameter 1.375 inches; bolt hole
diameter .219 inch.
CROSS SECTION
Aperture O/A No.
00-599-4291 .562 1.875 .062 2
F-34 METAL and ASBESTOS
F-20 metal and Asbestos cross sections. Metals as listed below. Number of
bolt holes as indicated.
2-106
CLASS 5330
CROSS SECTION
F-33 solid single or nonmetallic material cross section. Aperture diameter,

overall width and length, and thickness shown in inches. Outside edge to
bolt hole center distance along width and length (ADV W and Lg) also
shown in inches. Listed alphabetically by material content.
CROSS SECTION
COPPER and Asbestos. For use in aircraft jet engines. Design control STYLE B18 SHAPE F-33
reference 6724494.
Aperture O/A No.
00-641-6910 .922 2.188 .062 2
STYLE B15 CIRCULAR GASKETS

ASBESTOS except where noted. 4 bolt holes.
STYLE B15 CIRCULAR
Overall ADV
F-21 rectangular metal cross sections. Dia/In. W/In. Lg/In. Thk/In. W/In. Lg/In.
01-395-1562 1.940 3.500 3.500 .030 .500 .500
CROSS SECTION 01-348-2440* 4.250 5.000 5.000 .063 .500 .500
* Asbestos and Rubber
COPPER. 2 bolt holes.
Overall ADV
Dia/In. W/In. Lg/In. Thk/In. W/In. Lg/In.
00-945-4415 .750 1.125 2.250 .062 1.500 N/A
CORK overall except where noted. 4 bolt holes.

Overall ADV
00-542-0927* 1.156 1.812 2.750 .031 .281 .281
STEEL overall. 12 bolt holes; each approximately .438 inch in diameter in * Contains Rubber
a 7.500 inch diameter circle around gasket.
PLASTIC Alloy Polypropylene overall. 4 bolt holes.
OD/In. Thk/In.
01-067-9630 8.312 .531 Overall ADV
F-33 SOLID SINGLE, NONMETALLIC 00-979-1594 .312 1.000 1.000 .030 .138 .138
STYLE B15 CIRCULAR Rubber Alloy Chloroprene class CR overall. 4 bolt holes, except where
noted.
F-33 solid single or composition nonmetallic material cross section. Overall ADV
CROSS SECTION Dia/In. W/In. Lg/In. Thk/In. W/In. Lg/In.
00-815-6552 1.375 1.563 1.563 .020 .156 .156
STYLE B15 SHAPE F-33 01-077-0221* - 6.750 16.500 .062 1.875 1.500
* 18 bolt holes, each .218 inch diameter.
F-38 CLOTH and RUBBER
F-38 cloth and Synthetic Rubber cross section. Aperture diameter, overall
width and length; thickness and outside edge to bolt hole center distance
along width and length (ADV W and Lg) shown in inches.
RUBBER Chloroprene class CR overall. 18 bolt holes; each

approximately .218 inch in diameter in a 2.688 inch diameter circle around
gasket. ASTM D2000 2BC615B Ass Std.
OD/In. Thk/In.
00-334-6815 3.125 .031
2-107
CLASS 5330
CROSS SECTION CROSS SECTION
STYLE B18 SHAPE F-38 STYLE B21 SHAPE F-50
ALUMINUM ALLOY 6061 and FLUOROCARBON class FPM Rubber.

AMS4027 Assn Std 75 shore durometer hardness rated. 4 bolt holes
Overall ADV approximately .270 inches in diameter.
00-833-3771 .781 1.250 1.250 .035 .156 .156 Bolt Cir
00-558-0540 unk 2.500 2.562 .062 .281 .281 ID/In. OD/In. Thk/In. Dia/In.
00-549-9589 1.138 2.188 .125 1.656
STYLE B21 NON-CIRCULAR GASKETS 01-088-0314 1.372 unk .125 1.812
F-33 SOLID SINGLE, NONMETALLIC ALUMINUM ALLOY 6061 and BUTADIENE-ACRYLONITRILE class
NBR Rubber. Anodized overall. 4 bolt holes approximately .266 inch in
STYLE B21 NON-CIRCULAR diameter.
Bolt Cir
F-33 solid single or nonmetallic, material cross section. Number of bolt ID/In. OD/In. Thk/In. Dia/In.
holes as indicated. 00-806-6648 .905 2.292 .120 1.856
CROSS SECTION 00-141-2453 1.138 2.322 .120 2.188
00-898-9594 1.372 2.375 .120 2.558
STYLE B21 SHAPE F-33 00-902-7950* 1.841 3.984 .120 3.359
* Bolt holes diameter .330 inch.
STEEL COMPOSITION 302 and FLUOROCARBON class FPM Rubber

overall. Type 2, class 2 material response. 4 bolt holes approximately .208
inches in diameter.
Bolt Cir
ID/In. OD/In. Thk/In. Dia/In.
00-944-5940 .670 2.073 .132 1.635
RUBBER. Silicone class Q and GLASS. 4 bolt holes approximately .281
inches in diameter in a 3.500 inch circle around gasket. Hardness rated to UNKNOWN METAL and Rubber Composition. 4 bolt holes approximately
70 shore durometer. .328 inch in diameter. Gage ring thick .081 inch. Outside corner radius .312
inch. Temperature rated -35 degrees to 400 degrees Fahrenheit. 2000 PSI
Dia/In. W/In. Thk/In. tensile strength.
00-733-9096 1.031 4.000 .062
Bolt Cir
F-38 CLOTH and RUBBER, NONMETALLIC ID/In. OD/In. Thk/In. Dia/In.
01-003-5984 1.841 2.999 .124 4.639
F-38 cloth and Synthetic Rubber nonmetallic material cross section.
Aperture Diameter, Overall Width and Thickness shown in inches. Number F-33 SOLID SINGLE, NONMETALLIC
of bolt holes as indicated.
CROSS SECTION
F-33 solid single or nonmetallic material cross section.
CROSS SECTION
F-50 METAL and RUBBER
STYLE B21 NON- CIRCULAR

ASBESTOS material with .219 inch diameter bolt holes approximately
F-50 metal and Synthetic Rubber material cross section. Number of bolt 1.375 inches apart along the gasket length.
holes as indicated.
2-108
CLASS 5330
Aperture Overall
W/In. Lg/In. W/In. Lg/In. Thk/In. STYLE B24 CIRCULAR
00-297-5022 .500 1.000 .875 1.800 .031
F-13 metal with a soft material cross section as indicated. Number of bolt
PAPER and GLUE material with .406 inch diameter bolt holes holes as indicated.
approximately 2.500 inches apart along the gasket length.
CROSS SECTION
Aperture Overall
W/In. Lg/In. W/In. Lg/In. Thk/In. STYLE B24 SHAPE F-13
00-364-3550 .656 1.781 1.250 2.875 .031
STYLE B23 CIRCULAR
F-33 solid single or nonmetallic material cross section. Number of bolt F-14 METAL with FILLER
holes as indicated.
STYLE B24 CIRCULAR
CROSS SECTION
F-14 metal with a soft material cross section as indicated. Number of bolt
holes as indicated.
CROSS SECTION
ASBESTOS.
Bolt Cir No.
ID/In. OD/In. Thk/In. Dia/In. Holes
01-438-5913 3.750 5.750 .031 4.750 12 STEEL and ASBESTOS. Cross section of Corrosion Resistant Steel with a
soft Asbestos filler.
PAPER and GLUE overall. Bolt Cir No.
Bolt Cir No.
ID/In. OD/In. Thk/In. Dia/In. Holes 00-112-9775 2.800 5.000 .070 4.312 6
00-406-5245 2.000 3.750 .031 3.062 4
STYLE B24 CIRCULAR
F-21 rectangular metal cross section as indicated. Number of bolt holes as
indicated.
STYLE B24 CIRCULAR
CROSS SECTION
F-9 metal with soft filler material cross section. Number of bolt holes as
indicated. STYLE B24 SHAPE F-21
CROSS SECTION
STYLE B24 SHAPE F-9
COPPER
Bolt Cir No.
ASBESTOS and COPPER overall. Soft Asbestos filler surrounded by a 00-297-6773 3.281 6.312 .025 4.875 8
Copper casing. 00-255-2572 3.719 7.438 .031 5.750 8
Bolt Cir No. STEEL

00-245-8256 23.875 25.375 .062 24.625 16 Bolt Cir No.
00-252-1797 .907 2.000 .042 1.465 6
2-109
CLASS 5330
Bolt Cir No. Bolt Cir No.
ID/In. OD/In. Thk/In. Dia/In. Holes ID/In. OD/In. Thk/In. Dia/In. Holes
00-551-1493 1.656 4.000 .031 2.875 6 00-959-0297 1.500 2.625 .031 2.000 4
00-641-4053 1.969 4.375 .031 3.250 6 00-593-3234 1.880 3.090 .031 2.750 6
00-446-3348 3.281 6.312 .125 4.875 8 01-008-2900 2.060 5.000 .062 4.000 6
00-653-0293 2.750 4.188 .031 3.630 8
F-33 SOLID SINGLE, NONMETALLIC 00-007-5772 3.750 4.625 .062 4.125 unk
00-171-6856 4.625 6.250 .030 5.500 8
STYLE B24 CIRCULAR 01-008-2901* 4.880 6.060 .062 5.500 6
01-037-4236 5.000 7.500 .062 unk 6
01-239-7934 5.000 6.500 .062 5.750 8
F-33 solid single or nonmetallic composition cross section. Number of bolt
01-146-7318 5.188 7.250 .062 6.500 8
holes as indicated. 00-171-6857 7.125 9.750 .031 8.500 8
CROSS SECTION 00-958-8527 14.750 19.190 .031 17.500 16
* Exact style unknown
F-38 CLOTH and RUBBER, NONMETALLIC
STYLE B24 CIRCULAR
F-38 cloth and a Synthetic Rubber, nonmetallic composition cross section.

Number of bolt holes as indicated.
CROSS SECTION
ASBESTOS.
Bolt Cir No.
01-388-2843 2.250 3.500 .062 3.000 3
00-122-9648 6.000 7.500 .029 6.750 6
ASBESTOS and RUBBER.

Bolt Cir No.
01-076-2995 2.375 3.875 .062 3.188 4 RUBBER and COTTON material overall. Material response.
01-435-4549 4.000 6.375 .062 5.250 6 Bolt Cir No.
01-090-2868 4.250 5.875 .062 5.313 8 ID/In. OD/In. Thk/In. Dia/In. Holes
01-088-8911 12.125 15.500 .062 14.375 12
00-641-2887 6.281 8.875 .062 7.875 8
CLOTH and RUBBER.
RUBBER and PLASTIC Polyamide overall. 50 durometer nominal
Bolt Cir No. hardness rated.
Bolt Cir No.
00-291-6006 4.875 7.188 .062 6.062 8 ID/In. OD/In. Thk/In. Dia/In. Holes
CORK and RUBBER. 00-836-2099 4.000 5.032 .035 4.438 6
00-836-2100 6.250 7.438 .035 6.875 8
Bolt Cir No. 00-844-0751 8.625 9.844 .035 9.250 8
00-435-9015 2.000 3.000 .015 2.500 4 F-41 METAL and ASBESTOS
00-232-8352 2.875 4.250 .031 3.500 4
00-003-0676 11.000 14.375 .062 13.000 unk STYLE B24 CIRCULAR
CELLULOSE. F-41 metal as indicated with Asbestos cross section. Number of bolt holes
as indicated.
Bolt Cir No.
ID/In. OD/In. Thk/In. Dia/In. Holes CROSS SECTION
00-618-6681 .906 2.005 .042 1.375 4
00-579-5054 2.750 4.625 .031 3.875 6 STYLE B24 SHAPE F-41
01-004-9558 3.750 5.875 .031 5.250 4
PAPER.
Bolt Cir No.
01-050-3844 1.125 2.000 .031 1.625 4
00-339-5319 3.500 5.250 .031 4.500 6
RUBBER. Synthetic, Butadiene-Acrylonitrile, or Chloroprene. STYLES UNKNOWN

Bolt Cir No. F-21 RECTANGULAR METAL
00-828-8748 1.275 2.188 .031 1.812 12
2-110
CLASS 5330
Rectangular metal cross sections of unknown styles. Usage and material F-49 ASBESTOS and WIRE.
composition as indicated.
Asbestos interwoven with wire cross section. Unknown style.
COPPER. For use in Ice Plant Ammonia Compressor Assemblies. Outside Approximately .062 inch thick. Aperture length 9.375 inches. Overall width
diameter 2.750 inches. Thickness .014 inch. Bolt circle diameter 6.000 4.000 inches by length 18.125 inches. Six holes .375 inch in diameter.
inches. Bolt hole diameter .438 inch.
00-997-4400
00-374-3252
F-51 METAL and RUBBER
STEEL, Corrosion Resistant. For use in Aircraft Jet Engines. Inside
diameter 1.250 inches. Overall length 2.062 inches. Thickness .018 inch. Aluminum Alloy and Synthetic Rubber cross section. Unknown style.
Bolt hole diameter .281 inch. Center to center distance between bolt holes Approximately .133 inch thick. Special features include four apertures .500,
along width 1.375 inches; along length 1.500 inches. 1.062, 1.250, and 1.375 inches diameter. Temperature envelope of minus
65 degrees to 350 degrees Fahrenheit. 1500 PSI maximum pressure
00-320-2563 rating. Overall width 6.742 and length 7.531 inches.
ALUMINUM, laminate 93. Overall width 2.313 inches. Overall length 00-110-6222
17.375 inches. Thickness .080 inch. Bolt hole .344 inch.
GASKET, SPIRAL WOUND
00-066-1286
NOTE: Because of the variety of Styles and cross sectional Shapes
F-33 SOLID SINGLE, NONMETALLIC within the different type materials used in this area, the
following illustrations are provided in an effort to assist you
Nonmetallic composition cross section. Listed alphabetically. in the location of a proper replacement for most Gaskets,
Spiral Wound
ASBESTOS and RUBBER.
GASKET SHAPES
For use in air conditioning units and with compressor refrigerant.
Non-circular style unknown.
Aperture Overall
W/In. Lg/In. W/In. Lg/In. Thk/In.
01-387-8947 3.812 6.000 5.312 7.500 .031
01-388-4609 4.375 7.000 6.250 7.875 .031 F-44 INNER RING
00-797-7466 20.594 22.250 .062
For use with engine quadrant controls. Circular style unknown.

00-237-5653 3.344 4.224 .018
F-45 NO RING
CORK, Non-circular style unknown.
Aperture Overall
W/In. Lg/In. W/In. Lg/In. Thk/In.
00-026-2037 1.000 1.500 .031
00-641-1990 4.031 4.093 5.406 5.562 .219
00-053-5647* 4.438 15.000 5.188 15.750 .188 F-46 NO RING
00-217-0133 6.000 11.500 8.000 13.500 .125
00-110-3600 12.625 16.500 .125
00-383-8661 11.000 27.250 13.000 29.250 .094
* With Asbestos
With Rubber
COTTON. Circular style unknown.

F-47 OUTER RING
01-008-6866 3.750 .030 GASKETS, SPIRAL WOUND
01-092-1458 9.375 11.625 .062
A Spiral Wound Gasket is constructed from a strip of dovetail or V shaped
PAPER. Circular style unknown. corrosion resistant metal. Between the spiral wound metal plies, lies an
ID/In. OD/In. Thk/In. Asbestos paper cushion.
00-239-4304 3.500 5.000 .034
For Pipeline Flanged Joint Gaskets, a complete gasket consists of a gasket
00-620-7359 5.438 7.250 .031
refill plus a soft Carbon Steel outer ring.The refill is the gasket without the
outer ring.
PLASTIC. Non-circular style unknown.
W/In. Lg/In. Thk/In. The Diamond, Spiral Wound, Oblong and Oval shaped Boiler Hand
01-217-4040 .750 1.090 .010 Gaskets, do not include Steel outer rings.
Round Valve Bonnet Gaskets, Spiral Wound, are constructed without Steel
outer rings.
2-111
CLASS 5330
GASKET STYLES
B8/F-47
COMPLETE B1/F-45 OUTER
GASKET REFILL RING
NSN GASKET NSN ID OD OD
01-387-1977 7 7-25/32 8-1/4
01-408-6846 8 8-25/32 9-3/8
00-828-4527 4-7/8 5-15/32 6-1/16
00-965-0659 11 12-1/8 12-11/16
B-1 ROUND
300 PSI SERVICE
B8/F-47
GASKET REFILL RING
01-378-3951 3/4 1-7/32 2-3/8
B-4A DIAMOND 01-378-3938 1 1-17/32 2-11/16
01-378-2936 1-1/4 1-27/32 3-1/8
01-378-3046 01-411-7108 1-11/16 2-11/32 3-7/16
01-378-3092 2 2-23/32 4
01-379-9702 01-411-4532 2-9/16 3-11/32 4-1/2
01-378-4005 2-15/16 3-27/32 5-3/16
01-378-2896 00-239-5368 3-3/4 4-23/32 5-3/4
01-378-4172 01-442-3326 4-1/8 5-7/32 6-5/16
01-377-9787 4-3/4 5-27/32 6-7/8
B-5A OBROUND-OVAL 01-387-1972 5-5/16 6-15/32 7-7/16
01-384-7504 01-440-8565 6-7/8 8-7/32 9-1/4
01-387-1966 7-11/16 9-7/32 10-7/16
400 PSI SERVICE
B8/F-47
B-6A OVAL GASKET REFILL RING
01-381-9509 1/2 27/32 1-3/4
01-381-5724 00-239-5361 3/4 1-7/32 2-1/8
01-382-0097 1-1/4 1-27/32 2-7/8
01-379-9754 2 2-23/32 3-3/4
01-378-8797 01-411-4532 2-9/16 3-11/32 4-5/16
01-378-4308 00-239-5368 3-3/4 4-23/32 5-13/16
B-8 CIRCULAR (With outer ring) 01-381-5707 01-442-3326 4-1/8 5-7/32 6-5/16
01-380-7327 4-3/4 5-13/16 6-15/16
600 PSI SERVICE
B8/F-47
GASKET REFILL RING
B-11 CIRCULAR (With inner ring)
01-418-6198 1-15/16 1-7/8 2-7/8
01-338-7819 3-3/4 4-3/4 5.875
GASKETS, SPIRAL WOUND 00-239-3732 5-5/16 6-15/32 7-7/16
00-239-3733 00-580-2293 5-13/16 6-31/32 8-3/16
150 PSI SERVICE 01-379-9724 00-239-5373 6-3/8 7-19/32 8-15/16
01-394-7980 01-440-8565 6-7/8 8-7/32 9-9/16
B8/F-47 00-239-5377 8-5/16 9-27/32 11-5/16
GASKET REFILL RING
NSN GASKET NSN ID OD OD Type II. Gaskets with outer metal ring for service with ANSI 16.5 pipeline
flange joints. For use under pressures up to and including 2500 PSI. The
01-398-4223 3/4 1-3/32 1-5/8
01-042-1270 7/8 1-7/32 1-3/4 NSNs indicated are differentiated only by material as per the Spec Class.
01-412-1421 1 1-11/32 1-15/16
00-828-4185 1 1-11/32 1-15/16 Class A. Corrosion Resistant Steel, for temperatures up to 1050 degrees
01-434-1717 00-828-4184 1-1/2 1-31/32 2-5/8 Fahrenheit maximum.
01-392-7567 00-828-4183 1-3/4 2-7/32 2-7/8
01-386-8248 00-828-4182 2-1/4 2-23/32 3-7/16 Class B. Nickel-Chromium Iron Alloy, for temperatures up to 900 degrees
01-387-0382 00-828-4531 2-3/4 3-9/32 3-15/16 Fahrenheit maximum.
01-394-9346 3-3/8 3-31/32 4-1/2
01-391-4407 3-7/8 4-15/16 5 Class C. Nickel-Copper Alloy, for temperatures up to 700 degrees
01-390-4329 4-7/8 5-15/32 6-1/16 Fahrenheit maximum. Where contact with sea water is possible.
01-338-7835 5 5-7/8 6-7/8
01-413-3907 5-3/8 6-1/32 6-9/16
01-395-9567 4-7/8 5-15/32 6-1/16
01-041-9716 01-042-2872 6-1/2 7-7/32 7-11/16
2-112
CLASS 5330
NOTE: For refill, gasket inside diameter and outside diameter apply.
For complete gasket add outer ring outside diameter. Gasket CROSS SECTION B8/ F-47 OUTER
RING
is 0.175 inch thick and outer ring is 0.125 inch thick. All CLASS A CLASS B CLASS C ID OD OD
dimensions given in inches. 150 PSI SERVICE. 01-338-7779 3-3/4 4-23/32 6-5/8
01-338-7916 4-3/4 5-27/32 8-1/8
CROSS SECTION B8/ F-47 OUTER 01-338-7864 00-512-4910 5-13/16 6-31/32 9-3/4
RING 01-338-7860 8-7/8 10-11/32 14-1/8
CLASS A CLASS B CLASS C ID OD OD
01-338-7861 10-13/16 12-15/32 17-1/8
01-338-7816 02-324-0139 01-338-7851 1/2 27/32 1-3/4
01-338-7823 01-338-7929 01-338-7851 3/4 1-7/32 1-7/8
1500 PSI SERVICE
01-338-7824 01-324-1054 01-338-7853 1 1-17/32 2-1/4
01-338-7836* 01-324-9542 01-338-7924 1-1/4 1-27/32 2-5/8 OUTER
01-338-7910 01-338-7797 01-338-7852 1-23/32 2-11/16 3 CROSS SECTION B8/ F-47
RING
01-338-7789 01-323-5577 01-338-7854 2-1/8 3-23/32 3-3/8 CLASS A CLASS B CLASS C ID OD OD
01-338-7862 01-374-5970 2-3/4 3-11/32 4-1/8 01-338-7832 01-338-7778 01-338-7870 3/4 1-7/32 2-1/2
01-326-4348 01-324-1055 01-338-7885 3-1/8 3-27/32 4-7/8 01-338-7831 01-338-7898 01-338-7914 1 1-17/32 2-3/4
01-338-7856 4 4-23/32 5-3/8 01-338-7780 01-338-7818 01-338-7900 1-11/16 2-11/32 3-1/2
01-338-7813 01-041-6357 4-1/2 5-7/32 6-3/8 01-338-7820 01-338-7922 2 2-23/32 3-7/8
01-338-7835 01-324-1056 01-338-7857 5 5-27/32 6-7/8 01-338-7783 01-324-6749 3-3/4 4-23/32 6-7/8
01-338-7792 01-338-7928 01-338-7858 6-1/8 6-31/32 7-3/4 01-338-7784 01-338-7869 4-3/4 5-27/32 8-1/4
01-338-7812 01-324-1057 01-338-7911 7-3/16 8-7/32 8-3/4 01-338-7785 5-13/16 6-31/32 10
01-338-7863 01-338-7807 01-338-7885 9-3/16 10-11/32 11 01-338-7786 01-324-1058 6-7/8 8-7/32 11-1/8
01-338-7791 01-338-7798 01-424-6787 11-5/16 12-15/32 13-3/8 01-338-7787 8-7/8 10-11/32 13-7/8
01-338-7913 01-338-7887 14-5/8 15-31/32 17-3/4
* Outer ring outside diameter, 2-7/8 inch. 2500 PSI SERVICE
300 PSI SERVICE CROSS SECTION B8/ F-47 OUTER
RING
OUTER CLASS A CLASS B CLASS C ID OD OD
CROSS SECTION B8/ F-47
RING 01-338-7799 01-324-1053 3/4 1-7/32 2-3/4
CLASS A CLASS B CLASS C ID OD OD 01-338-7840 1 1-17/32 3
01-338-7849 3/4 1-7/32 2-1/8 01-338-7800 2-3/4 3-27/32 6-5/8
01-041-4777 01-338-7806 1 1-17/32 2-5/8
01-338-7828 01-338-7805 1-11/16 2-11/32 3-1/4 COMMERCIAL USE GASKETS, SPIRAL WOUND
01-345-0251 01-338-7817 2-9/16 3-11/32 4-3/8
01-338-7888 01-338-7930 2-15/16 3-27/32 5-1/8
01-338-7819 01-338-7826 01-324-4210 3-3/4 4-23/32 5-7/8 With outer metal ring. Flexitallic Gasket or equal. Part numbers indicated
01-338-7810 01-338-7889 4-1/8 5-7/32 6-1/2 below.
01-338-7794 01-338-7837 01-338-7890 4-3/4 5-27/32 7-1/8
01-338-7896 5-13/16 6-31/32 8-1/2 150 PSI SERVICE
01-338-7809 01-338-7808 6-7/8 8-7/32 9-7/8
01-338-7848 10-13/16 12-15/32 14-1/4 OUTER
CROSS SECTION RING FLEXITALLIC
B8/F-47 NSN ID OD OD PART NO.
400 PSI SERVICE
01-338-7824 1 1-9/16 2-1/4 CG-1C
OUTER 01-338-7836 1-1/4 1-27/32 2-5/8 CG-1D
CROSS SECTION B8/ F-47
RING 01-326-4348 3-1/4 3-7/8 4-7/8 CG-1H
CLASS A CLASS B CLASS C ID OD OD 01-388-2135 5-1/2 6-1/2 7 CG-1M
01-338-7819 3-3/4 4-23/32 5-7/8 00-290-9558 7-3/16 8-1/4 8-3/4 CG-1P
01-338-7881 01-345-0250 4-1/8 5-7/32 6-3/8 01-338-7873 13-3/8 14-3/4 16-1/8 CG-1S
01-338-7865 6-7/8 8-7/32 9-3/4 01-380-9500 18-11/16 20-3/4 21-5/8 CG-1V
600 PSI SERVICE 300 PSI SERVICE
CROSS SECTION B8/ F-47 OUTER OUTER

RING CROSS SECTION RING FLEXITALLIC
CLASS A CLASS B CLASS C ID OD OD B8/F-47 NSN ID OD OD PART NO.
01-388-8835 01-324-0139 01-338-7933 1/2 27/32 1-3/4 01-338-7896 1/2 7/8 1-3/4 CG-3A
01-338-7805 01-338-7828 01-338-7804 1-11/16 2-11/32 3-1/4 01-338-7849 3/4 1-1/4 2-1/8 CG-3B
01-338-7811 01-323-5580 01-324-4208 2 2-23/32 3-3/4 00-077-1458 1-1/4 1-7/8 2-7/8 CG-3D
01-323-5583 01-338-7817 2-9/16 3-11/32 4-3/8 01-338-7810 4-1/2 5-1/4 6-1/2 CG-3K
01-338-7881 4-1/8 5-7/32 6-3/8 01-338-7794 5 5-7/8 7-1/8 CG-3L
01-338-7825 01-324-8886 01-338-7926 4-3/4 5-27/32 7-5/8 01-045-6635 5-1/2 6-1/2 7-3/4 CG-3M
01-338-7793 01-338-7827 01-324-2634 5-13/16 6-31/32 9-1/2 01-338-7896 6-1/8 7 8-1/2 CG-3N
01-338-7822 01-324-1059 01-338-7878 6-7/8 8-7/32 10-1/2 01-338-7809 7-3/16 8-1/4 9-7/8 CG-3P
01-338-7774 01-338-7829 8-7/8 10-11/32 12-5/8
400 PSI SERVICE
900 PSI SERVICE
OUTER
CROSS SECTION B8/ F-47 OUTER CROSS SECTION RING FLEXITALLIC
RING B8/F-47 NSN ID OD OD PART NO.
CLASS A CLASS B CLASS C ID OD OD
01-041-9692 01-338-7898 01-338-7914 1 1-17/32 2-3/4 01-045-6640 3/4 1-1/4 2-1/8 CG-4B
01-338-7780 01-338-7818 01-338-7900 1-11/16 2-11/32 3-1/2 01-053-2919 2-3/4 3-3/8 4-3/8 CG-4G
01-041-9697 01-322-8810 2-9/16 3-11/32 5-5/8
01-338-7782 01-338-7872 01-338-7901 2-15/16 3-27/32 6-1/2
2-113
CLASS 5330
600 PSI SERVICE Nominal pressure rating 1500 PSI. Temperature rating 950 degrees
Fahrenheit.
OUTER
CROSS SECTION RING FLEXITALLIC Aperture X-sect
B8/F-47 NSN ID OD OD PART NO. W/In. L/In. Thk/In.
01-338-7833 1-1/4 1-7/8 2-7/8 CG-6D 01-394-9926 2.781 3.406 .175
00-286-9855 2-3/4 3-3/8 4-3/8 CG-6G
01-338-7888 3-1/4 3-7/8 5-1/8 CG-6H GRAPHITE and STEEL (B1 / F-45).
01-338-7819 4 4-3/4 5-7/8 CG-6J
01-338-7825 4-3/4 5-7/8 7-5/8 CG-6L Corrosion resisting Steel with soft spiral wound filler. Style B1 Circular,
Shape F-45. Nominal pressure rating of 1500 PSI.
900 PSI SERVICE
CROSS SECTION
OUTER
CROSS SECTION RING FLEXITALLIC STYLE B1 SHAPE F-45
01-338-7830 1-1/4 1-7/8 3-1/8 CG-9D
1500 PSI SERVICE
OUTER
01-048-6122 1 1-9/16 2-3/4 CG-15C
Aperture X-sect
01-048-6123 2-3/4 3-7/8 6-1/2 CG-15H
01-338-7783 3-5/8 4-3/4 6-7/8 CG-15J ID/In. OD/In. Thk/In.
00-239-3768 4-5/8 5-7/8 8-1/4 CG-15L 00-862-9391 3.641 4.173 .175
01-048-6162 5-5/16 6-1/2 9-1/8 CG-15M
00-097-6510 18-1/4 20-3/4 27-3/4 CG-15V ASBESTOS and STEEL (B1 / F-45).
2500 PSI SERVICE For service in other than flange joints, such as valve bonnets, pumps and
other related applications, where conditions do not exceed 2500 PSI at
OUTER 1050 degrees Fahrenheit. Style B1 Circular, Shape F-45.
B8/F-47 NSN ID OD OD PART NO. Aperture X-sect
01-046-3934 1-1/4 1-7/8 3-3/8 CG-25D ID/In. OD/In. Thk/In.
01-338-7800 2-3/4 3-7/8 6-5/8 CG-25H 01-434-1473* .406 .781 .175
00-064-8804 3-5/8 4-3/4 7-3/4 CG-25J 00-926-1923* .938 1.438 .175
01-388-2419* 1.000 1.625 .175
GRAPHITE and STEEL (B4A / F-45). 00-641-1698* 1.219 1.750 .175
00-841-2282* 1.500 2.000 .125
Corrosion Resisting Steel with soft spiral wound filler. Style B4A Diamond, 00-087-0172 1.531 2.078 .125
Shape F-45. Nominal pressure rating of 1500 PSI. 01-438-0519* 1.562 2.125 .175
01-387-1973 1.875 2.375 .125
CROSS SECTION 01-308-7462 2.062 2.688 .175
01-416-9490* 2.062 2.938 .175
STYLE B4A SHAPE F-45 01-383-0100 2.125 2.625 .125
00-551-9786 2.250 3.125 .175
00-989-6914 2.375 2.875 .125
01-375-2169 2.688 3.062 .125
00-989-6913 2.750 3.250 .125
01-382-7075* 3.062 3.923 .175
01-363-0621* 3.312 4.062 .175
01-380-0797 4.125 3.375 .125
Aperture 00-171-7274 3.938 4.430 .125
X-sect 00-996-7712* 12.312 12.750 .175
W/In. L/In. Thk/In. * Non Spec item
00-306-1128 3.375 3.750 .125
01-392-5158 3.375 4.250 .175 ASBESTOS and NICKEL-CHROMIUM IRON (B1 / F-45).
00-599-5782 3.781 4.656 .175
Aperture X-sect
GRAPHITE and STEEL (B5A / F-45). ID/In. OD/In. Thk/In.
01-387-0504 .500 1.000 .125
Corrosion Resisting Steel with soft Chlorite spiral wound filler. Style B5A 01-026-0637 1.000 1.375 .125
Oval, Shape F-45. Nominal pressure and temperature rating as indicated. 01-283-1776 1.328 1.671 .175
01-023-8161 7.513 8.090 .125
CROSS SECTION
ASBESTOS and STEEL, CORROSION RESISTING (B1 / F-45).
STYLE B5A SHAPE F-45
Type 1.
Aperture X-sect
00-857-5861* .437 .750 .125
01-431-7627 1.000 1.375 .125
2-114
CLASS 5330
Metal winding with soft filler or spiral wound filler. Style B8 circular, Shape
Aperture X-sect F-47. Maximum pressure rating 150 PSI.
01-394-3480* 1.094 1.625 .125 Aperture X-sect
00-892-4050 1.312 1.688 .125 ID/In. OD/In. Thk/In.
01-395-9580 1.406 1.812 .175 01-338-4223 .750 1.094 .175
01-381-0036 1.515 2.015 .125 01-338-7824 1.000 1.531 .175
00-782-9441 1.687 2.437 .175
00-720-3395 1.812 2.156 .062 ASBESTOS and STEEL (B11/F-44).
01-410-7171 1.812 2.562 .175
01-478-3395 2.140 2.890 .140 Corrosion Resisting Steel Composition 304 or 347 with metal winding soft
00-958-0245 2.312 2.875 .175 Asbestos filler and inner ring. Style B11 Circular, Shape F-44. Maximum
00-809-1997 2.375 2.875 .125 pressure rating to 1260 PSI. Gage ring thickness .100 inch nominal. Gage
01-040-8666 3.130 3.970 .062
ring outside diameter 3.688 inches nominal. Bearing surface width .438
00-752-8654 3.375 4.125 .125
inch nominal.
00-585-1309 4.250 4.750 .125
01-388-3070 9.687 10.250 .125 CROSS SECTION
* Non Spec Item
RUBBER and STEEL (B1 / F-45).
Corrosion Resisting Steel with soft Asbestos spiral wound filler. Style B1
Circular, Shape F-45.
Aperture X-sect
00-585-1310 .688 1.062 .133 Aperture X-sect
ASBESTOS and STEEL (B1 / F-46). 00-297-5169 3.312 4.562 .175
Corrosion Resisting Steel with soft Asbestos spiral wound filler. Style B1 LEATHER, CATTLEHIDE
Circular, Shape F-46.
CROSS SECTION Chrome-tanned, wax impregnated, hydraulic packing. furnished in belting
butt ends. Used with hydraulic pistons at temperatures to 155 degrees
STYLE B1 SHAPE F-46 Fahrenheit, and pressures to 3,000 PSI. Full grain, whole skin, mineral
tanning with natural finish.
Thk Grade
00-276-9512 1/8-5/32 Medium
OAKUM
Spun and tarred hemp. For caulking boats and ships. Approximately 45-55
Aperture feet per pound.
X-sect
ID/In. OD/In. Thk/In. 00-191-5679 5 lb. ball
00-369-7741 0.625 1.000 .125
00-890-1471* 1.250 1.620 .125
00-291-4082 2.812 3.344 .175 O-RING
00-641-2346* 2.812 3.750 .172
* Non Spec Item Rubber or Rubber compound material. Used in various applications
according to specific size.
GRAPHITE OVERALL (B8 / F-47).
ID/In. Thk/In.
Metal winding with soft filler and outer ring. Style B8 circular, Shape F-47. 00-240-3392 .101 .070
Maximum pressure rating 150 PSI. Gage ring thickness .125 inch nominal. 00-689-6489 .424 .103
. 00-914-1118 1.171 .139
00-608-6432 3.359 .139
Aperture X-sect
ID/In. OD/In. Thk/In. PACKING ASSEMBLY
01-394-9346 3.375 3.969 .175
Asbestos, Copper Alloy and Graphite material. D2 square/rectangular
GRAPHITE and NICKEL ALLOY (B8 / F-47). cross-sectional shape style.
Steel outer ring with spiral wound filler. Style B8 circular, Shape F-47. OD/In. ID/In. Ht/In.
Temperature rating 900 degrees Fahrenheit. 00-559-2537 .875 .375 2.125
Aperture X-sect Asbestos, Nickel Alloy and Synthetic Resin material. D2

ID/In. OD/In. Thk/In. square/rectangular cross sectional shape style.
01-324-0143 1.250 1.844 .175
01-323-5583 2.562 3.344 .175 OD/In. ID/In. Ht/In.
01-324-2633 4.000 4.719 .175 01-424-7039 1.910 1.250 .312
GRAPHITE and STEEL (B8 / F-47). Plastic Polyamide and Rubber Chloroprene material. D2
2-115
CLASS 5330
square/rectangular cross sectional shape style.
OD/In. ID/In. Ht/In.
00-202-2599 1.052 .777 .938
00-202-2594 1.052 .609 .938
00-202-2587* .771 .387 .938
00-202-2588 .750 .390 1.000
* D3 cross sectional shape style. V top,
bottom and intermediate rings.
Asbestos and Copper Alloy material. D7 special cross sectional shape OD

style.
00-190-9978 1/2
01-391-9230 1.375 .875 1.500 Fiberglass material.Twisted rope type, circular cross-sectional shape style.
Any acceptable length. Temperature rating 500 degrees Fahrenheit.
Graphite and Plastic Polytetrafluoroethylene material. D35 cup and D2 Dia
square/rectangular cross sectional shape style.
01-344-1046 .375
OD/In. ID/In. Ht/In. 01-343-8540 .625
01-376-0812 1.000 .610 1.425 01-343-8543 1.000
01-376-0811 .875 .480 1.375
ELECTRIC CABLE STUFFING-TUBE PACKING
Rubber Chloroprene or Plastic Polyamide material. D53 angle and D2
square/rectangular cross sectional shape style. Circular packing. For electric cable seals in decks, bulkheads, and
equipment stuffing tubes. Issued in Reel or spool form.
00-202-2603 1.687 .937 1.375 Retainer packing. Braided Asbestos yarn, waterproofed, Non spec.
00-202-2602 1.687 .889 1.375
00-788-8713 1.687 .812 1.375
00-202-2589 .750 .425 1.000
00-202-2586 .750 .325 1.000
00-202-2585 .687 .296 .937
00-202-2584 .687 .278 .937
00-202-2583 .687 .234 .937
Rubber Chloroprene or Plastic Polyamide material. D79 Special and D2

square/rectangular cross sectional shape style. OD
01-410-7157 3/16
00-202-2593 1.515 .584 .938 Sealing packing. Cork particles, Graphite, lubricant and Plastic binder
00-202-2590 .750 .472 .938 enclosed in a woven Cotton lattice jacket.
PACKING MATERIALS
Rubber impregnated Asbestos metallic cloth. Boiler access opening
gaskets for temperatures to 500 degrees Fahrenheit, and pressures to 300
PSI. Cross sectional shape style 3 rectangular.
Cross sectional height 40 inches. Any acceptable length.

Thk OD
00-268-9879 1/16 00-264-8460 3/16
00-268-9880 1/8 00-264-8461 1/4
00-264-8463 3/8
Cross sectional height as indicated. Approximate length, 48 feet.
OIL RESISTANT SYNTHETIC RUBBER
Thk H
00-222-2576 1/8 1 For gasketing where resistance to oil and serviceability at temperatures
01-392-3352 3/16 1 above minus 20 degrees Fahrenheit. are required. Low temperature tested.
Yellow marking identifies oil resistance. 1000 PSI tensile strength.
Cross sectional height and width as indicated. Length 51 inches OD/In.
nominal.Conatins non-asbestos material.
00-222-2590 1/8
W H 00-222-2591 3/16
01-415-7775 0.625 0.625 00-222-2592 1/4
00-222-2593 5/16
00-222-2594 3/8
BOILER CASING TWISTED ROPE
00-222-2595 1/2
Asbestos rope. For sealing between steam sectional boiler headers, ROD AND VALVE STEM PACKING
uptake dampers, boiler bolt grommets, and boiler casing gasketing at
temperatures to 500 degrees Fahrenheit. 25-50 pound coils. Square braided Asbestos yarn, lubricated and Graphite. 36 square shape
style. Any acceptable length. Type as shown.
2-116
CLASS 5330
Type 1 - Plain Type. For rotary rods, reciprocating rods, and valve stems at
temperatures to 250 degrees Fahrenheit, and pressures to 600 PSI. Size
00-527-7493 1-1/4
OD/In. * Oil Lubricated
00-197-8535 1/8
Square braided metal foil over a nonmetallic core, graphite lubricated. For
Type 2 - Wire Inserted. For valve stems and expansion joints where steam reciprocating and rotary rods, valve stems, and outside packed plungers at
temperatures are to 500 degrees Fahrenheit and pressures to 600 PSI. temperatures to 550 degrees Fahrenheit. Furnished in coil form.
OD/In. Size
00-197-8524* 1/8 00-186-1745 1/4
00-197-8527 5/16 00-186-1747 3/8
* May contain Brass, Nickel or Copper 00-186-1749 1/2
Circular shape style
For rotary and reciprocating pumps servicing steam, water, gas or oil.
Square braided asbestos yarn, TFE impregnated and coated with a Temperatures 550 degrees Fahrenheit. Square cross section accept where
petroleum lubricant. For stern tubes, rudder posts, rotary shafts, indicated.
reciprocating rods, and valve stems where pressures do not exceed 2500
PSI, and rod or shaft speeds to 5000 RPM. Temperature limit to 500 TYPE B. SYMBOL 1433
degrees Fahrenheit. Furnished in reels or spools.
Size
00-197-9650 1/8 Sq
01-399-8492* 1/4 Cir
01-359-1535 1/2 Sq
01-388-1003 5/8 Sq
* Circular cross section
Square nonmetallic Plastic core with corrosion inhibitor. Wire, Asbestos

braided jacket. For valve stems, rods, expansion joints using superheated
steam and hot gases. Class 2, Type shown below.
Size
00-038-2922 1/4
00-618-3223 5/16
00-005-0521 1
Square braided Asbestos and Lead, lubricated with mineral oil. For general
rod and valve stem use at temperatures to 450 degrees Fahrenheit.
Furnished in reels or spools.
Size
01-388-8456* 1/2 TYPE C. SYMBOL 1108. Wire inserted for temperatures to 850 degrees
* Temperature not rated. Fahrenheit.
Square braided yarn. Lubricated with Graphite. 1000 degrees Fahrenheit Size
temperature rating. Tensile strength, not rated. Any acceptable length. 00-197-8490 1/8
Non-Spec Item. 00-197-8493 5/16
00-197-8494 3/8
Size 00-197-8495 7/16
01-307-3780 1/4 00-197-8497 9/16
00-197-8498 5/8
Square braided flax, For rods and valve stems in hot or cold water or brine 00-197-8505* 11/8
at 300 PSI and fuel oil service at 500 PSI, and temperatures to 200 degrees * Circular Plastic
Fahrenheit. composition
Graphite Lubrication. TYPE E. SYMBOL 1111. Inconnel wire inserted, for line temperatures to
1200 degrees Fahrenheit. Square braided Asbestos and
Size Nickel-Chromium-Iron Alloy. Tensile strength not rated.
00-530-0680 1/8
00-530-0681 3/16 Size
00-202-3427 1/4 00-599-9550 1/2
01-390-5251 7/16 00-599-9552 5/8
00-530-0683 3/8
00-530-0685 1/2 Any acceptable lubrication method. For packing dogs and operating the
handwheel spindles of watertight doors and closures.
Any acceptable lubrication.
Size TYPE 1. Solid, circular. Plastic. Approximately 1-/4 diameter and 1-1/4 long
00-527-7498* 3/16
00-527-7495* 1/4 00-262-9439
00-527-7502 5/16
00-527-7503 3/8 TYPE 2. 1/8 diameter. Any acceptable length latticed and solid, circular.
00-527-7505* 1/2 Plastic and Cotton.
00-527-7499 7/8
00-527-7496 1 00-262-9437
2-117
CLASS 5330
TYPE 3. Loose fibrous material. Plastic. Shipped in 5 pound carton.
Tube ID
00-262-9436 00-995-5382 1/2
00-901-7196 9/16
GRAPHITE. Corrugated ribbon form. For use in steam systems, 00-044-5726 5/8
conventionally powered ships. 1250 PSI. 00-724-5541 3/4
00-995-5381 13/16
H W Lg/Ft 00-760-5719 7/8
01-011-5048 3/4 .013 100 00-939-9095 15/16
01-011-5049 1/2 .013 50 00-900-7399 1
01-011-5050 1/4 .013 50 00-182-3115 1-1/16
01-004-6639 1/64 1.000 100 00-942-5120 1-1/8
00-934-9794 1-3/16
00-472-6954 1-3/8
PACKING, PREFORMED 00-135-7227 1-1/2
00-052-5267 1-5/8
A circular shaped item with an aperture manufactured to predetermined 00-460-8310 1-7/8
dimensions and designed for use as a seal in stuffing boxes, packing nuts, 00-067-6408 2-1/4
and the like. It may be any nonmetallic molded or formed ring or any 00-941-9444 3
shredded metal or metal foil type metallic or semimetallic ring. Excludes felt
items, but includes multi material items in which one of the materials is felt. 3/32 inch X-Sect.
For Rubber items specifically designed for weatherproofing doors,
windows, chests, and etc., see Seal. Tube ID
00-891-1759 3/8
STYLE D1 / O-RING 00-965-0719 7/16
00-579-8108 7/16
00-915-3630 1/2
00-981-3736 9/16
00-965-0749 5/8
00-138-4440 11/16
00-829-2608 3/4
00-075-3221 13/16
00-143-7932 7/8
00-143-8695 15/16
00-143-6875 1
Rubber, hot oil and Ethylene Glycol type coolant resistant. Low swell, 55-65 00-437-5261 1-1/16
durometer. 00-180-9098 1-3/16
00-981-3733 1-1/4
1/18 inch X-Sect. 00-853-9191 1-5/16
00-469-3917 1-7/16
Tube ID 00-849-8352 1-11/16
00-599-0458 1-1/16 00-068-4358 2
00-171-6411 3-1/2 00-990-4129 2-1/2
00-975-2037 3
AM3238. Rubber, Phosphate esters resistant. Low permeability to gases. 01-053-1009 3-1/2
65-75 durometer. 00-930-3041 3-3/4
00-021-3625 4
00-143-6823 4-1/4
1/16 inch X-Sect.
00-941-5767 5-1/2
Tube ID 00-118-9090 5-3/4
00-559-8586 11/64
00-582-2522 15/64 1/8 inch X-Sect.
Tube ID
70-80 durometer.
00-001-4811 3/4
00-901-4407 13/16
1/16 inch X-Sect. 00-829-2607 7/8
Tube ID 00-968-1864 15/16
00-997-7230 1
00-222-1680 23/64
00-463-0327 1-1/16
00-965-0750 1-1/8
65-75 durometer. 00-881-1234 1-1/4
00-068-2500 1-3/8
1/16 inch X-Sect. 00-197-8981 1-7/16
Tube ID 00-194-6970 1-1/2
00-599-6406 1-7/8
00-079-4578 1/8 00-463-0225 2-3/4
00-990-7749 5/32 00-990-4149 2-3/4
00-052-7533 3/16 00-829-2606 2-7/8
00-052-9730 7/32 00-902-0401 3
00-225-9054 1/4 00-849-6720 3-1/8
00-071-2204 5/16 00-482-7963 3-1/4
00-066-2413 3/8 00-901-6194 3-3/8
00-003-9193 3/8 00-440-4948 3-1/2
00-724-7902 27/64
2-118
CLASS 5330
Tube ID Tube ID
00-180-9090 3-5/8 00-701-1819 6
00-072-3665 3-7/8
00-939-9097 4-1/8 1/8 inch X-Sect.
00-926-9331 4-1/4
00-146-2670 4-3/4 Tube ID
00-223-1073 4-7/8 00-857-6664 3/4
00-849-6726 5-1/8 00-059-7503 1-1/4
00-989-6002 5-5/8 00-059-6515 2-1/4
00-853-4272 6-1/4 00-851-1826 2-3/8
00-891-1760 6-1/2 00-846-1592 2-5/8
00-497-1247 6-3/4 00-045-4559 2-7/8
00-849-6735 7-1/2 00-882-8058 3-1/8
00-905-3653 7-3/4 00-425-2080 3-7/8
00-054-8546 8-1/2
00-926-4075 9 AMS7274. Rubber, hot petroleum base lubricating oil, and low temperature
00-935-9260 14 to minus 65 degrees Fahrenheit. 65 to 75 durometer.
3/16 inch X-Sect. 1/8 inch X-Sect.

Tube ID Tube ID
01-006-5479 1-7/8 00-290-9384 1-1/16
01-103-1785 2
00-420-5918 2-3/4 Rubber, oil and low temperature resistant. For temperatures above minus
01-165-7581 2-7/8 20 degrees Fahrenheit. 35-55 durometer.
00-321-9962 3-3/8
00-121-2466 3-5/8
00-121-2475 3-3/4 3/16 inch X-Sect.
Tube ID
1/4 inch X-Sect.
00-171-8069 8-9/16
Tube ID
01-164-8556 5-1/2 1/4 inch X-Sect.
01-058-5413 15-1/2 Tube ID
00-171-7429 3/4
Rubber, Synthetic lubricant resistant. BUNA-N type. 65-75 durometer.
9/32 inch X-Sect.
1/16 inch X-Sect.
Tube ID
Tube ID
00-171-7426 10-7/8
00-059-8753 5/32
00-846-0502 1/4
5/16 inch X-Sect.
00-882-6874 5/16
00-068-4382 7/16 Tube ID
00-852-4230 9/16
00-291-9218 6-13/16
00-715-1364 11/16
00-924-7760 7/8
7/16 inch X-Sect.
00-882-8051 15/16
00-924-7757 1-1/18 Tube ID
00-009-0534 1-1/4
00-291-3368 7-9/16
00-269-4495 2-7/8
11/16 inch X-Sect.
3/32 inch X-Sect.
Tube ID
Tube ID
00-291-5960 3-1/16
00-910-6629 3/8
00-081-6910 7/16
00-959-0982 1/2 These O-rings are usually made of Ethylene Propylene Rubber. Grade 1
00-846-0503 9/16 O-rings have a hardness of 65 durometer and are suitable for temperatures
00-846-0499 5/8 to 230 degrees Fahrenheit. Grade 2 O-rings have a hardness of 80
00-857-7175 3/4 durometer and are suitable for temperatures up to 280 degrees Fahrenheit.
00-846-0501 7/8 These O-rings are compatible with hot air, hot water, steam, aryl phosphate
00-846-0500 15/16 ester hydraulic fluids and Aqueous Monoethanolamine (MEA).These seals
00-701-1768 1-7/16 are also used in water-glycol hydraulic systems, CO2 scrubbers, and
00-882-8045 1-9/16 coolant discharge systems.
00-842-3203 1-5/8
00-846-0504 1-21/32 GRADE 1. (65 shore durometer)
00-007-0180 1-3/4
00-701-1880 1-7/8 1/8 inch X-Sect.
00-115-1357 2
00-883-6572 2-3/8 ID
00-686-1314 5-1/4 00-582-7144 1-1/2
00-882-8056 5-3/4 00-245-5211 7
2-119
CLASS 5330
9/32 inch X-Sect.
ID
ID 00-172-7187 2-3/8
00-136-5673 8-1/2 00-166-8396 2-1/2
00-166-8397 2-5/8
GRADE 2. (80 shore durometer) 00-166-8398 2-3/4
00-166-1041 3
Boss/tube fitting O-ring, intended for use with internal straight thread 00-166-1046 3-1/4
connection bosses and tube fittings. 00-166-1049 3-1/2
00-245-5611 3-3/4
01-013-3718 4
3/32 inch X-Sect.
00-166-1055 4-1/4
ID 00-303-0091 4-1/2
00-580-6326 3/4 01-010-3369 4-3/4
01-010-3370 5
01-009-6735 5-1/4
Fluorocarbon O-rings for temperatures up to 500 degrees Fahrenheit.
Class 1 has a Shore durometer hardness of 75 and Class 2 a hardness of
90. Type 1. Rubber, oil and fuel resistant. For use where resistance to fuel 3/32 inch X-Sect.
and lubricating oil is required. ID
01-005-0502 1/16
3/32 inch X-Sect.
01-005-0505 5/32
01-007-1599 1-3/4 01-005-0506 3/16
01-005-0507 7/32
Fluorocarbon O-rings intended for use when resistance to jet fuel, 00-762-9964 1/4
Synthetic engine lubricants and petroleum hydraulic fluids is required. Also 01-007-4887 5/16
suitable for Phosphate Ester base fluids and sea water. Generally suitable 00-166-1058 3/8
over a temperature range from minus 30 to 500 degrees Fahrenheit. 00-166-1059 7/16
00-166-1060 1/2
CLASS 1 seals with a Shore durometer hardness of 75 are the preferred 00-166-1062 9/16
O-ring material for shipboard petroleum base and Triaryl Phosphate Ester 00-166-1063 5/8
base hydraulic systems, lube oil and refrigeration systems. 00-166-1066 11/16
00-166-1068 3/4
00-166-1071 13/16
CLASS 2 seals with a shore durometer hardness of 90 are the preferred
00-166-1072 7/8
O-ring gaskets for bosses.
00-166-1074 15/16
00-166-1076 1
CLASS 1 00-167-5110 1-1/16
00-167-5111 1-1/8
1/16 inch X-Sect. 00-167-5112 1-3/16
00-167-5113 1-1/4
ID
00-322-6397 1-5/16
01-006-3930 1/16 00-167-5114 1-3/8
00-166-0959 5/64 00-167-5115 1-7/16
00-166-0963 1/8 00-167-5116 1-1/2
00-166-0966 5/32 00-167-5117 1-9/16
00-166-0967 3/16 00-167-5118 1-5/8
00-166-0968 7/32 00-167-5119 1-11/16
00-166-0969 1/4 00-167-5120 1-3/4
01-062-4465 5/16 00-167-5121 1-13/16
00-166-0975 5/16 00-167-5122 1-7/8
00-166-0980 3/8 01-005-0508 1-15/16
00-166-0988 7/16 00-167-5123 2
00-166-0990 1/2 01-005-0509 2-1/16
00-166-0991 9/16 00-537-3929 2-1/8
00-166-0992 5/8 00-167-5124 2-3/16
00-166-0993 11/16 01-010-3371 2-1/4
00-166-0994 3/4 00-330-3307 2-5/16
00-166-0996 13/16 00-537-3888 2-3/8
00-166-1001 7/8 00-167-5125 2-7/16
00-166-1010 15/16 00-167-5126 2-1/2
00-166-1011 1 00-167-5127 2-9/16
00-166-1017 1-1/16 00-172-7188 2-5/8
00-166-1020 1-1/8 00-167-5128 2-11/16
00-166-1022 1-3/16 00-167-5129 2-3/4
00-166-1025 1-1/4 00-167-5135 2-13/16
01-166-1026 1-5/16 00-167-5136 2-7/8
00-166-1030 1-3/8 00-167-5137 3
00-166-1036 1-1/2 00-167-5138 3-1/4
00-166-8390 1-5/8 00-167-5139 3-1/2
00-166-8391 1-3/4 00-166-8399 3-3/4
00-166-8392 1-7/8 00-166-8400 4
00-194-1670 2 00-166-8401 4-1/4
00-166-8394 2-1/8 00-530-6990 4-1/2
00-166-8395 2-1/4
2-120
CLASS 5330
ID ID
00-165-1935 4-3/4 00-404-1473 5
00-165-1936 5 00-165-1966 5-1/8
00-005-0482 5-1/4 00-165-1967 5-1/4
00-165-1937 5-1/2 00-165-1968 5-3/8
00-165-1938 5-3/4 00-165-1969 5-1/2
00-537-3944 6 00-554-0990 5-5/8
01-005-0515 6-1/2 00-165-1970 5-3/4
01-106-7289 6-3/4 00-167-5140 5-7/8
00-549-3628 7 00-167-5141 6
00-173-3022 7-1/4 00-167-5142 6-1/4
00-364-8103 7-1/2 00-167-5143 6-1/2
01-019-2452 7-3/4 00-167-5144 6-3/4
01-106-0943 8 00-167-5145 7
01-007-4888 8-3/4 01-005-3702 7-1/4
01-005-0513 9 00-167-5146 7-1/2
01-005-0512 9-1/4 00-167-5147 7-3/4
01-005-0511 9-1/2 00-167-5148 8
01-005-0516 9-3/4 01-005-3202 8-1/4
00-167-5149 8-1/2
1/8 inch X-Sect. 00-167-5150 8-3/4
00-167-5151 9
ID 00-167-5152 9-1/4
01-005-0517 3/16 00-167-5153 9-1/2
01-005-3200 1/4 01-005-0522 9-3/4
01-004-9552 5/16 01-005-0523 10-1/2
01-006-9034 3/8 00-159-9152 11
01-005-0518 7/16 01-005-0524 11-1/2
01-005-0521 1/2 01-005-0525 12
01-005-3701 9/16 00-167-5154 13
01-005-0519 5/8 00-167-5155 14
01-005-0520 11/16 01-006-2103 15
00-166-8402 3/4 00-537-3923 16
00-166-8428 13/16 00-537-3927 17
00-166-8403 7/8 00-539-6313 18
00-165-1940 15/16
00-165-1941 1 3/16 inch X-Sect.
00-166-8404 1-1/16
00-165-1942 1-1/8 ID
00-165-1943 1-3/16 01-006-0302 7/16
00-166-8405 1-1/4 01-005-3703 1/2
00-166-8406 1-5/16 01-005-3705 9/16
00-166-8411 1-3/8 01-005-3706 5/8
00-166-8412 1-7/16 01-005-4042 11/16
00-194-1675 1-1/2 01-005-4043 3/4
00-166-8415 1-5/8 01-005-4044 13/16
00-166-8422 1-3/4 01-005-4046 7/8
00-165-1944 1-7/8 01-006-0304 15/16
00-421-9387 2 01-006-0305 1
00-173-3023 2-1/8 01-006-0307 1-1/16
01-021-6285 2-1/8 01-006-0308 1-1/8
00-165-1946 2-1/4 01-006-0306 1-3/16
00-165-1947 2-3/8 01-006-0303 1-1/4
00-165-1948 2-1/2 01-005-4045 1-5/16
00-165-1949 2-5/8 01-005-3704 1-3/8
00-165-1950 2-3/4 00-167-5156 1-1/2
00-165-1951 2-7/8 01-005-3212 1-5/8
00-165-1952 3 01-005-3213 1-3/4
00-165-1953 3-1/8 01-007-5144 1-7/8
00-165-1954 3-1/4 01-005-4057 2
00-165-1955 3-3/8 01-005-4058 2-1/8
00-165-1956 3-1/2 01-026-1706 2-1/8
00-165-1957 3-5/8 00-167-5157 2-1/4
00-165-1958 3-3/4 01-005-4409 2-3/8
00-165-1959 3-7/8 00-167-5158 2-1/2
00-165-1960 4 01-005-4055 2-5/8
00-165-1961 4-1/8 01-005-4056 2-3/4
00-165-1962 4-1/4 01-009-7216 2-7/8
00-165-1963 4-3/8 01-005-4059 3
00-165-1964 4-1/2 00-367-4374 3-1/8
01-005-3201 4-5/8 00-167-5159 3-1/4
00-165-1965 4-3/4 01-005-4062 3-3/8
00-537-3940 4-7/8 00-167-5160 3-1/2
2-121
CLASS 5330
ID ID
01-005-4060 3-5/8 01-005-2308 8
01-005-3214 3-3/4 01-005-2309 8-1/2
01-005-4061 3-7/8 01-007-4895 9
00-184-3472 4 01-008-6808 9-1/2
01-005-3215 4-1/8 01-005-4053 10
01-005-3216 4-1/4 01-205-3173 10
01-005-3205 4-3/8 00-167-5163 10-1/2
01-005-3206 4-1/2 00-167-5164 11
01-005-3207 4-5/8 01-005-4054 11-1/2
01-005-3208 4-3/4 01-005-2310 12
01-005-3209 4-7/8 01-005-2311 12-1/2
01-006-0310 5 01-005-2312 13
01-006-0311 5-1/8 01-005-2313 13-1/2
01-006-0312 5-1/4 01-005-2314 14
01-006-0313 5-3/8 01-005-2315 14-1/2
01-006-0315 5-5/8 01-006-0318 15
01-009-6732 5-3/4 01-006-0319 15-1/2
01-006-0316 5-7/8 01-006-0320 16
01-006-0309 6 01-006-0321 16-1/2
01-006-0317 6-1/4 01-006-2106 17
01-006-0322 6-1/2 01-006-2107 17-1/2
01-006-2105 6-3/4 01-006-2108 18
01-006-0323 7 01-006-2109 18-1/2
01-006-0324 7-1/4 01-006-2111 19-1/2
01-006-0325 7-1/2 01-006-2112 20
01-006-2121 7-3/4 01-006-2113 21
01-006-0326 8 01-006-2114 22
01-006-0328 8-1/4 01-006-2116 24
01-006-0329 8-1/2 01-006-2117 25
01-006-2122 8-3/4
01-006-0327 9 Boss/tube fitting O-ring, intended for use with internal straight thread
01-006-0330 9-1/4 connection bosses and tube fittings.
01-006-2123 9-1/2
01-006-3932 9-3/4 1/16 inch X-Sect.
01-005-2305 10
01-004-9551 10-1/2 ID
01-005-0526 11 00-167-5165 1/16
01-005-0527 11-1/2 00-165-1971 1/4
01-005-0528 12 00-165-1972 5/16
01-005-0529 13 00-020-0203 3/8
01-005-0530 14 00-167-5166 7/16
01-005-0531 15
01-005-0532 16 5/64 inch X-Sect.
01-005-0533 17
01-005-0537 21 ID
01-005-0538 23 00-020-0186 1/2
01-005-0539 24 00-173-3025 9/16
01-005-3211 25 00-020-0105 5/8
1/4 inch X-Sect. 3/32 inch X-Sect.
ID ID
01-005-0541 4-1/2 00-165-1974 11/16
01-005-0542 4-5/8 00-020-0067 3/4
01-005-0543 4-3/4
01-007-4891 4-7/8 1/8 inch X-Sect.
01-006-9035 5
01-005-0544 5-1/8 ID
01-005-3204 5-1/4 00-165-1975 7/8
01-006-2104 5-3/8 00-020-0064 11/16
01-005-4047 5-1/2 01-006-2119 1
01-005-4048 5-5/8 00-211-8213 1-1/16
01-005-4049 5-3/4 00-165-4565 1-3/16
01-005-4050 5-7/8 00-165-1976 1-3/8
01-005-4051 6 00-165-1977 1-1/2
01-005-4052 6-1/4 00-165-1978 1-3/4
00-167-5162 6-1/2 00-165-1979 2-1/16
01-007-4892 6-3/4 01-006-2120 2-3/8
01-007-4893 7
01-007-4894 7-1/4
CLASS 2.
01-005-2307 7-1/2
01-005-4408 7-3/4
1/16 inch X-Sect.
2-122
CLASS 5330
ID ID
00-166-1077 5/64 00-338-1382 1-7/16
01-132-1925 1/8 01-006-2129 1-1/2
01-103-2596 1/8 01-187-7680 1-3/4
00-425-0649 5/32 00-338-1440 1-7/8
00-166-1078 3/16 00-166-1112 2
00-133-9791 7/32 01-106-0940 2-1/8
00-166-1079 1/4 01-119-3220 2-1/4
00-166-1081 5/16 00-338-1441 2-3/8
00-166-1084 3/8 01-180-5228 2-1/2
00-166-1085 7/16 01-113-9871 2-5/8
00-166-1086 1/2 01-174-7868 2-3/4
00-166-1087 9/16 01-189-3822 2-7/8
00-528-5236 5/8 01-194-8964 3
00-166-1088 11/16 01-127-0972 3-1/8
00-166-1089 3/4 01-006-2130 3-1/4
01-058-4008 13/16 01-167-9770 3-3/8
01-127-0849 7/8 00-167-5167 3-1/2
00-166-1090 15/16 01-050-1537 3-5/8
00-166-1091 1 01-129-2730 3-3/4
01-137-9007 1-3/64 01-144-1661 4-1/8
00-556-7513 1-1/8 01-043-1904 4-1/4
00-166-1092 1-3/16 01-203-2327 4-3/8
01-203-6549 1-1/4 01-105-9152 4-7/8
00-166-1094 1-5/16 00-167-5168 5-1/8
00-166-1095 1-3/8 01-106-0938 5-3/8
00-166-1097 1-1/2
01-112-1765 1-7/8 3/16 inch X-Sect.
01-148-2691 2-5/8
ID
3/32 inch X-Sect. 01-028-8289 1-1/2
01-137-8392 1-7/8
ID 00-167-5170 2
00-166-1098 3/8 01-183-9169 2-1/8
00-166-1099 1/2 01-028-6511 2-1/2
01-121-8092 9/16 01-243-9299 2-7/8
01-133-9790 5/8 00-338-1302 3
01-105-9153 11/16 01-199-5375 3-1/8
00-211-9143 3/4 01-212-4624 3-3/4
01-106-0936 11/16
01-106-0942 1 Boss/tube fitting O-ring, intended for use with internal straight thread
00-166-1100 1-1/16 connection bosses and tube fittings.
01-182-8670 1-1/8
00-166-1101 1-3/16 1/16 inch X-Sect.
01-184-7576 1-5/16
00-166-1104 1-7/16 ID
01-104-4906 1-1/2 00-167-5171 1/4
01-105-9154 1-9/16 01-011-4057 5/16
01-176-4014 1-5/8 00-167-5172 3/8
01-058-4009 1-11/16 00-165-1980 7/16
01-049-6595 1-13/16
01-188-7636 2-3/16 5/64 inch X-Sect.
01-180-5229 2-5/16
01-104-5943 2-3/8 ID
01-104-4411 2-7/16 00-165-1981 1/2
00-556-7506 3 00-167-5173 5/8
00-001-6681 3-1/2
3/32 inch X-Sect.
1/8 inch X-Sect.
ID
ID 00-167-5174 3/4
01-047-2908 7/16
01-127-0971 3/4 1/8 inch X-Sect.
01-175-9164 13/16
00-166-1109 7/8 ID
01-120-9550 1-15/16 01-018-5663 7/8
01-017-6535 1 00-167-5175 1
01-125-1731 1-1/16 01-088-6106 1-1/16
00-166-1110 1-1/8 00-167-5176 1-3/16
01-027-4703 1-3/16 01-024-2512 1-1/2
01-106-7288 1-1/4 00-172-7189 1-3/4
01-106-7290 1-5/16 01-088-6871 2-5/16
00-166-1111 1-3/8
Synthetic Rubber. Shore durometer hardness of 75 nominal. Temperature
2-123
CLASS 5330
rating between minus 65 degrees Fahrenheit and plus 275 degrees
Fahrenheit. ID
01-160-4324 4-1/2
1/16 inch X-Sect.
1.4 inch X-Sect.
ID
01-107-4962 1/16 ID
01-088-5363 1/4 01-183-0983 4-1/2
01-047-0435 5/16 01-183-0984 4-5/8
01-046-3300 3/8 01-183-0985 4-3/4
01-088-6108 7/16 01-107-4960 4-7/8
01-046-0628 9/16 01-160-4329 5
01-043-1419 5/8 01-160-4330 5-1/8
01-050-1538 11/16 01-160-4331 5-1/4
01-046-3299 3/4 01-160-4332 5-1/2
01-050-1539 13/16 01-160-4333 5-5/8
01-107-4950 7/8 01-160-4334 5-3/4
01-107-4961 1 01-160-4335 5-7/8
01-107-4963 1-1/16 01-160-4336 6
01-107-9249 1-1/8 01-160-4337 6-1/4
01-123-3298 1-1/4 01-160-4338 6-1/2
01-107-4949 1-5/16 01-160-4339 6-3/4
01-160-4340 7
3/32 inch X-Sect. 01-183-0987 7-1/4
01-160-4341 7-1/2
ID 01-211-9788 7-3/4
01-160-2508 3/8 01-183-0979 8
01-107-4955 1/2 01-186-8336 8-1/2
01-107-4954 5/8 01-174-0214 9
01-110-1412 3/4 01-183-0986 9-1/2
01-123-3299 1 01-169-0657 10-1/2
01-117-1076 1-3/16 01-185-1927 12
01-097-6619 1-5/16 01-195-8733 12-1/2
01-123-3300 1-3/8 01-161-4498 13
01-118-7701 1-7/16 01-199-5370 14
01-097-8957 1-9/16 01-162-4704 14-1/2
01-113-2083 1-5/8 01-199-5374 15
01-146-4563 1-3/4
01-112-4060 1-7/8 RUBBER
01-089-1583 2-3/16
01-115-2216 2-5/16 Shore durometer hardness rating of 70 nominal.
01-112-4059 2-5/8
01-105-6662 2-3/4 1/16 inch X-Sect.
1/8 inch X-Sect. ID

00-343-1035 1/4
ID 00-498-5733 5/16
01-182-7410 3/4 00-759-1687 3/8
01-133-4718 7/8 00-759-2022 7/16
01-213-6128 15/16 00-759-2113 1/2
01-113-5624 2-3/4 00-765-1948 9/16
00-759-2121 11/16
3/16 inch X-Sect. 00-702-7217 1-1/8
01-007-8798 1-3/16
ID 00-377-0921 1-1/4
01-160-4343 1-1/2 00-279-9305 1-3/8
01-160-4344 1-3/4 01-018-6498 2-1/2
01-160-4345 1-7/8
01-129-9438 2 3/32 inch X-Sect.
01-160-4346 2-1/8
01-123-3303 2-1/4 ID
01-160-4347 2-1/2 00-763-0074 1/2
01-160-4348 2-3/4 00-498-5755 1-3/16
01-160-4349 2-7/8 00-759-1692 1-5/8
01-160-4342 3 01-010-2419 2-9/16
01-162-4705 3-1/8 00-498-5806 3-1/4
01-162-4706 3-7/32
01-172-2432 3-3/8 1/8 inch X-Sect.
01-175-0311 3-1/2
01-174-3283 3-3/4 ID
01-160-4326 3-7/8 01-007-1608 1
01-179-0252 4 01-010-2420 1-29/64
01-160-4327 4-1/8 00-288-2036 1-1/2
01-160-4328 4-1/4 00-279-4342 2-1/2
2-124
CLASS 5330
ID Peripheral
00-279-4344 2-3/4 ID Dia
01-007-4898 3 00-582-7481 3-7/64 3-41/64
01-007-4899 3-1/8
PACKING WITH RETAINER
3/32 inch X-Sect.
ID ONE PIECE CONSTRUCTION
01-005-4064 1/4
00-288-1976 3/8 Rubber, Yellow color, 050 inch nominal retainer thickness and .072 inch
00-279-9323 1/2 nominal cross sectional diameter.
00-279-9322 5/8
01-006-9048 1-3/16 ALUMINUM, Anodized retainer.
ID OD Thk
7/32 inch X-Sect.
01-165-4518 .240 .500 .050
ID
01-129-6962 1/2 CRES STEEL, Passivated or Annealed.
00-279-9391 1-7/8
00-279-9317 2-1/8 ID OD Thk
01-029-8185 .240 .500 .050
Shore durometer hardness rating of 75 nominal.
Rubber.
1/16 inch X-Sect.
STEEL, Cadmium Plated.
ID
01-130-9665 1-5/16 ID OD Thk
01-145-5162 .301 .600 .050
hore durometer hardness rating of 70 nominal. 01-145-5160 .490 .882 .050
1/16 inch X-Sect. Rubber .050 inch nominal, retainer thickness and .072 inch nominal cross
sectional diameter.
ID
ID OD Thk
01-129-2018 1-3/4
01-101-9492 .180 .445 .050
SQUARE or RECTANGULAR PREFORMED PACKING MATERIALS 01-128-6071 .427 .757 .050
SYNTHETIC RUBBER inner ring with an integral metallic outer retaining

A circular shaped item with an aperture manufactured to predetermined
ring as indicated.
dimensions and designed for use as a seal in stuffing boxes, packing nuts,
and the like. It may be any nonmetallic molded or formed ring or any
shredded metal or metal foil type metallic or semimetallic ring. Excludes felt ALUMINUM Alloy retaining rings.
items, but includes multi material items in which one of the materials is felt. ID OD Thk
For rubber items specifically designed for weatherproofing doors, 00-171-8363 .242 .500 .050
windows, chests, and etc., see Seal. 00-413-4734 .245 .531 .072
STYLE D2 / SQUARE-RECTANGULAR STEEL, Cadmium Plated retaining ring.

ID OD Thk
00-580-5329* .184 .364 .041
00-808-1805 .281 .377 .054
00-580-5327* .280 .516 .054
01-019-2616 .740 1.322 .060
* Triangular shaped Rubber ring.
PAPER, GASKET
Paper material with an animal or plant fiber. Gas, oil and water resistant 36
inches wide and 36 to 48 inches long.
Military Specification single material response overall classification Plastic,
Thk/In.
Tetrafluoroethylene Resin material Scarf-Peripheral packing joints.
00-270-8465 .003
3/64 inch X-Sect. 00-270-8466 .007
00-270-8467 .011
Peripheral 00-270-8468 .016
ID Dia 00-467-3615 .031
00-894-1954 9/32 11/64 00-634-8265 .031
00-163-6566 7/16 5/8 00-270-8470 .063
00-270-8471 .094
5/64 inch X-Sect. 00-270-8473 .125
00-270-8475 .250
P3415-A. 36 inches wide.
2-125
CLASS 5330
Thk/In. Lg/In. ID OD
00-530-2253 .010 3600 00-582-1538 .390 .562
00-530-2259 .016 1800 01-020-9521 .444 .616
00-530-2254 .031 1800 00-582-2113 .452 .624
00-530-2762 .062 900 00-543-7085 .577 .749
01-020-9519 .633 .805
00-801-3440 .702 .874
RETAINER, PACKING 00-582-2111 .765 .937
00-835-7712 .832 .919
Plastic. Teflon back up rings. Intended for use in air, Nitrogen and hydraulic 01-020-9516 .825 .997
systems. Temperature range of minus 65 degrees to 275 degrees 00-821-8849 .895 1.067
Fahrenheit, at pressures from 0-3000 PSI continuous, and 0-45000 PSI 00-820-4142 .957 1.129
intermittent. 00-814-2371 1.014 1.000
00-821-8848 1.082 1.254
00-808-2335 1.145 1.317
01-020-9514 1.141 1.313
00-808-2340 1.207 1.379
00-822-0991 1.270 1.442
00-819-4641 1.332 1.514
00-800-9721 1.397 1.569
01-041-3399 1.397 1.569
00-820-9846 1.455 1.627
General Service Application. Boss/Tube fittings packings. 00-892-1608 1.522 1.694
00-808-2337 1.584 1.756
ID OD 01-020-9517 1.581 1.753
00-935-9268 .309 .533 00-725-4369 1.647 1.819
00-246-6403 .360 .594 00-821-1508 1.709 1.881
00-487-4687 .423 .655 00-848-9128 1.771 1.943
00-246-6404 .478 .720 00-850-7490 1.834 2.000
00-550-6742 .656 .906 00-734-1843 1.897 2.066
00-809-2587 .941 1.279 00-850-7491 1.960 2.130
00-487-4676 1.191 1.529 00-842-8342 2.002 2.194
00-808-2339 2.084 2.256
00-702-2534 2.147 2.319
00-998-3140 2.209 2.381
00-205-3465 2.508 2.680
00-853-4152 2.754 2.930
.050 inch X-Sect.

ID OD
.050 inch X-Sect.
00-543-7087 766 1.004
ID OD 01-031-8611 766 1.004
00-585-6937 .109 .215 00-582-2116 828 1.066
01-020-9510 .126 .232 00-571-9008 .884 1.122
00-057-5709 .140 .246 00-543-7088 .891 1.129
00-088-8719 .202 .308 00-582-2146 .953 1.192
00-582-1551 .234 .340 00-543-7089 1.016 1.254
00-842-5505 .265 .370 00-618-6845 1.073 1.311
00-582-1548 .327 .431 00-582-2142 1.141 1.379
00-543-7090 .390 .496 00-582-2141 1.203 1.441
01-020-9511 .376 .482 00-582-2150 1.266 1.504
00-843-9726 .455 .561 00-582-2118 1.334 2.572
00-580-5055 .518 .624 00-582-1539 1.397 1.635
00-684-2572 .580 .686 00-684-2164 1.459 1.697
00-064-2570 .643 .751 00-582-1536 1.522 1.760
01-020-9518 .632 .738 00-582-1544 1.647 1.885
00-833-4210 .695 .801 00-582-1537 1.772 2.010
00-839-1846 .768 .874 00-582-1550 1.897 2.134
00-720-3652 .830 .936 00-582-1547 2.022 2.260
00-838-9773 .892 1.004 00-582-7526 2.147 2.285
00-413-4520 .951 1.058 00-582-1542 2.272 2.510
00-419-2969 1.015 1.121 00-582-1541 2.397 2.634
00-841-9959 1.023 1.129 00-582-2143 2.522 2.760
00-855-3430 1.085 1.191 00-820-4019 2.755 2.993
00-618-8899 1.148 1.254 00-582-1549 2.880 3.118
00-800-9720 1.210 1.316 00-567-4905 3.004 3.243
00-834-6676 1.273 1.377 00-543-7093 3.130 3.368
00-003-9271 1.329 1.435 00-582-1543 3.254 3.493
00-814-2372 1.398 1.500 00-729-5142 3.504 3.743
00-582-1540 3.630 3.868
00-729-5141 3.880 4.118
.050 inch X-Sect.
00-684-2735 4.130 4.369
2-126
CLASS 5330
.030 inch X-Sect.
ID OD
00-582-2149 4.255 4.493 ID OD
00-543-7083 4.629 4.867 00-171-5052 .125 .235
00-171-6748 .156 .266
.070 inch X-Sect. 00-171-5074 .188 .298
00-171-5063 .219 .329
ID OD 00-171-5044 .250 .360
00-582-1545 1.513 1.879 00-641-0103 .312 .422
00-582-2119 1.638 2.004 00-171-5042 .375 .485
00-582-2144 1.763 2.129 00-171-5885 .375 .551
00-618-6282 1.888 2.254 00-641-1571 .438 .614
00-582-2107 2.013 2.379 00-171-5047 .500 .676
00-582-2145 2.138 2.504 00-171-5889 .562 .738
00-582-2115 2.268 2.634 00-171-5048 .625 .801
00-542-0920 2.393 2.759 00-171-6768 .688 .864
00-543-7092 2.516 2.882 01-043-3468 .688 .864
00-582-2108 2.643 3.009 00-171-6754 .750 .926
00-836-6092 2.893 3.259 00-171-5897 .750 .992
00-684-2168 3.018 3.384 00-171-5075 .812 1.054
00-582-1546 3.143 3.509 00-171-5069 .875 1.117
00-582-1533 3.398 3.764 00-171-6746 .938 1.180
00-582-1534 3.523 3.889 00-171-6749 1.000 1.242
00-582-2148 4.028 4.394 00-171-9225 1.062 1.304
00-834-6679 4.280 4.642 00-171-6767 1.125 1.367
00-843-9719 4.528 4.894 00-171-6757 1.188 1.430
00-171-6758 1.250 1.492
105 inch X-Sect. 00-171-6760 1.312 1.554
00-171-6755 1.375 1.617
ID OD
00-904-4129 4.551 5.021 .030 inch X-Sect.
00-729-5143 4.801 5.272
00-845-5016 5.176 5.647 ID OD
00-834-6675 5.300 5.775 00-171-7346 1.438 1.680
00-899-6728 5.529 6.001 00-171-6695 1.500 1.742
00-078-8381 6.752 7.225 00-171-5102 1.500 1.870
00-171-5073 1.625 1.995
PLASTIC TETRAFLUOROETHYLENE 00-171-5071 1.750 2.120
00-171-5908 1.875 2.245
.050 inch X-Sect. 00-663-7151 2.000 2.370
00-171-6770 2.125 2.495
ID OD 00-171-5098 2.250 2.620
00-376-8653 1.000 1.178 00-171-5097 2.375 2.745
00-892-4096 2.254 2.430 00-171-5070 2.500 2.870
00-839-7795 2.317 2.493 00-171-5902 2.625 2.995
00-878-4784 2.379 2.555 00-640-9717 2.750 3.120
00-061-2359 2.442 2.618 00-171-6764 2.875 3.245
00-061-2360 2.567 2.743 00-171-5067 3.000 3.370
00-950-1303 2.692 2.868 00-171-5898 3.125 3.495
00-957-1120 2.817 2.993 00-171-5778 3.250 3.620
00-663-7152 3.375 3.745
.050 inch X-Sect. 00-171-5890 3.500 3.870
00-171-5901 3.625 3.995
ID OD 00-171-5065 3.750 4.120
01-066-3936 1.124 1.366 00-171-5894 3.875 4.245
00-061-2361 2.630 2.867 00-171-5062 4.000 4.370
00-061-2379 2.755 2.994 00-171-5053 4.125 4.495
00-808-4467 3.380 3.618 00-171-5752 4.250 4.620
00-083-0678 3.505 3.743 00-171-5066 4.375 4.745
00-275-3371 3.630 3.868 00-171-5050 4.500 4.870
00-038-8931 3.755 3.993
01-208-8050 4.005 4.242 .050 inch X-Sect.
ID OD
.105 inch X-Sect.
00-663-7035 4.500 4.976
ID OD 00-171-6751 4.875 5.351
00-883-0233 7.002 7.474 00-171-5904 5.000 5.476
00-889-2128 7.502 7.974 00-171-5905 5.125 5.601
00-171-5903 5.250 5.726
TEFLON back-up rings. Intended for same use as indicated above. .050 00-171-6747 5.500 5.976
00-171-6763 5.625 6.011
inches wide.
00-171-5064 5.750 6.226
00-171-6762 6.000 6.476
General service application. 00-171-6765 6.250 6.726
2-127
CLASS 5330
RUBBER SHEET, SOLID
ID OD
00-171-5779 6.500 6.976 AIRTIGHT / WATERTIGHT SERVICE
00-171-6756 6.750 7.226
00-171-6694 7.000 7.476
Synthetic Rubber material; light and water resistant. 40-50 durometer. For
00-171-5068 7.500 7.976
gasketing in airtight and/or watertight closures. 1000 PSI tensile strength.
00-171-5899 7.750 8.226
00-171-5913 8.000 8.476 Smooth surface. Thickness shown in inches. Any acceptable length except
00-171-5886 8.500 8.976 where noted.
00-171-5887 9.000 9.476
00-171-9223 10.500 10.976 24 inch wide coils.
00-641-0225 12.000 12.476
00-171-6753 12.500 12.976 Thk
00-171-6759 13.000 13.476 00-244-0191 1/16
00-244-0192* 1/8
TEFLON back up packing retainers. .120 inches wide. * 27 feet long.
.030 inch X-Sect. 36 inch wide rolls.
ID OD Thk
00-171-6693 1.625 1.865 00-244-0193 1/4
00-171-5893 1.750 1.990 00-244-0195 3/8
00-641-1573 1.875 2.115 00-244-0197 1/2
00-171-5100 2.000 2.240
00-171-5049 2.125 2.365 FUEL / PETROLEUM OIL SERVICE
00-171-5099 2.250 2.490
00-171-5891 2.375 2.615 Synthetic Rubber material. For low temperature, aviation fuels, petroleum
00-171-5051 2.500 2.740 base oils, and weather resistant applications. Petroleum oil, weather, and
00-171-5095 2.625 2.865 ozone resistant. Class 2.
00-171-9222 2.750 2.990
00-171-9220 2.875 3.115 Shore durometer 35 to 45. 1200 PSI.
00-641-0101 3.000 3.240
00-171-5043 3.125 3.365 Thk/In. Lg x W/In.
00-171-5072 3.250 3.490 00-261-5423 1/16 36 x 36
00-171-5914 3.375 3.615 00-261-5433 1/8 24 x 36
00-171-5910 3.500 3.740
00-171-5911 3.625 3.865 Shore durometer 55 to 65. 1500 PSI.
00-171-6761 3.750 3.990
00-171-5909 3.875 4.115 Thk/In. Lg x W/In.
00-171-5046 4.000 4.240 00-261-5424 1/16 36 x 36
00-171-5892 4.250 4.490 00-261-5440 1/8 36 x 36
00-944-9577 4.750 4.990
GENERAL PURPOSE SERVICE
RUBBER ROUND SECTION
Synthetic Rubber, cured. 45-55 durometer. 1000 PSI tensile strength.
Synthetic Rubber, Black. Having a circular cross section. Shore durometer Smooth surface. Any acceptable color. Thickness displayed in inches.
of 55 to 65. 1500 PSI tensile strength cellular structure may be tubular or
nontubular. Any acceptable length. CLASS 1. Oil resistant.
OD Thk/In. Lg x W/Ft
00-542-4466* .105 00-292-0880 1/32 9x3
00-641-3718 .188 00-641-3051 1/16 3x3
00-641-3719 .250 00-729-5103* 1/8 3x3
* Non Spec Item .1300 PSI, any acceptable color. * Non Spec Item. 1200 PSI tensile
Synthetic Rubber material. Circular cross section. Shore Durometer (Sh CLASS 2. Non-oil resistant.
Dm) and outside diameter as indicated.
Thk/In. Lg x W/Ft
Sh Dm OD 00-244-9276 1/16 120 x 3
00-641-6366* 25-35 .125 00-244-9277 1/8 60 x 3
00-607-0617 65-75 .275 00-244-9278 3/16 A/A x 3
* 100 pounds tensile strength 00-244-9279 1/4 A/A x 3
00-244-9280 5/16 A/A x 3
00-244-9281 3/8 A/A x 3
RUBBER SHEET, CELLULAR 00-261-5455* 1/2 A/A x 3
* Non Spec Item. 1200 PSI tensile.
Medium condition Rubber. Smooth surface exploded cellular fabrication.
120 inches long, 24 inches wide, and .500 inch thick. Any acceptable color. Synthetic Rubber material with 70-80 durometer hardness. Smooth
Tensile strength and hardness not rated. surface, both sides. Compression, high temperature and fluid resistant.
1600 PSI tensile strength.
00-232-2447
Thk/In. Lg x W/Ft
00-395-3529 1/16 in. 15 x 3
01-064-8065 1/8 in. 3x2
2-128
CLASS 5330
OIL / LOW TEMPERATURE SERVICE
H/In. W/In. Lg/Ft
Cured Synthetic Rubber material. 35-55 durometer hardness. For use 00-290-5879 3/4 3/4 100
where resistance to oil and serviceability to temperatures above minus 20 00-290-5872 1 1/2 100
degrees Fahrenheit are required. 35-42 inch wide rolls. 1000 PSI tensile. 01-014-6318 1-1/8 1/2 100
smooth surface. 00-290-5873 1-3/16 1/2 100
00-290-5858 1-1/4 1/4 100
Thk Lg/Ft 00-171-9368 1-1/4 1/2 100
00-222-2565 1/32 A/A 00-542-1984 1-1/4 1/2 100
00-222-2566 1/16 3 00-290-5878 1-1/2 5/8 100
00-222-2568 1/8 33 00-290-5859 2 1/4 100
00-222-2569 1/4 18 * Non Spec Item. Tensile strength not rated.
1/8 inch by 45 degree bevel on all edges.
Synthetic Rubber material, 50 shore durometer hardness. Smooth, both
sides. 1500 PSI tensile strength. SEAL, PLAIN ENCASED
Oil Resistant. A pliable Rubber, felt, leather or composition ring shaped element, split or
solid, with or without spring or spreader, having a metal shell on all or a
Thk/In. Lg x W/Ft portion of at least two of the outer surfaces. It may be designed to be either
00-527-9087 1/4 3x3 bolt mounted or press mounted between fixed or movable parts to form a
tight and effective seal by the pressure of the spring or spreader or the
Fuel Resistant. resiliency inherent in the element material.
Lg x
Thk/In. W/Ft SEAL STYLES
01-003-7690 1/8 2x2
00-180-4833 1/8 3x3
Synthetic Rubber, 80-90 shore durometer hardness. For use in distilling

plants and other applications. 1600 PSI tensile strength.
Acid and water resistant.

Thk/In. Lg x W/Ft
00-850-3501 1/16 A/A x 3 ELEMENT STYLES
00-850-3502 1/8 25 x 3
RUBBER SHEET, SOLID, CLOTH INSERT

Synthetic Rubber, and one ply of fractioned Cotton fabric for each 1/16 inch
of thickness. Strengthening feature insert. For flanged joints using water or
brine, to 250 degrees and for ventilating systems. 1000 PSI tensile
strength. Water resistant, smooth surface. 35-44 inch wide rolls.
Thk/In.
00-179-0050 1/16
00-179-0051 3/32
00-179-0052 1/8
00-179-0053 3/16
00-179-0054 1/4
RUBBER STRIP
Rubber, Synthetic, 40-50 durometer. For use in watertight and airtight SEAL, PLAIN ENCASED dimensions, including Shaft Size, Housing Bore
closures. Solid strip form. (HB), and Seal Width (W), are displayed in inches.
Size-Shaft Size
NOTE: This material is not intended for food equipment use. HB-Housing Bore
W-Seal Width
H/In. W/In. Lg/Ft
01-031-1135* 1/16 3/8 1.6 SQUARE CASE SEAL STYLES
01-032-0886* 1/8 1 15.3
00-290-5853 1/8 1/8 100
00-290-5854 3/16 3/16 100
00-290-5855 1/4 1/4 100
00-892-4258* 5/16 1/8 1.5
00-804-6813* 3/8 1/4 11
00-290-5863 3/8 5/16 100
00-290-5865 3/8 3/8 100
00-290-5869 1/2 1/2 100
00-598-6966* 9/16 25/64 22
00-026-7926 9/16 1/2 4
00-290-5883 3/4 3/8 100
00-290-5871 3/4 1/2 100
2-129
CLASS 5330
SQUARE CASES SINGLE #4-ANGULAR SEALING ELEMENT. Steel case and all leather
sealing elements with springs. Shaft speed ratings up to 2000 feet per
SINGLE #2-VERTICAL SEALING ELEMENT. Steel case with a minute (fpm).
Cadmium-Chromate surface treatment. Synthetic Rubber sealing element.
Leather Sealing Elements
Size/In. HB/In. W/In.
00-735-6235 1.000 1.500 .312 Size/In. HB/In. W/In.
00-292-0492* .750 1.375 .400
SINGLE #3-ANGULAR SEALING ELEMENT. Steel case and a Synthetic 00-178-4679 1.000 1.828 .438
Rubber sealing element without springs. Shaft speed ratings between 00-154-9075 1.500 2.250 .500
2000 and 3000 fpm. 00-250-5743 2.500 3.189 .438
00-154-8358* 2.875 3.751 .500
Size/In. HB/In. W/In. 00-527-7322 3.125 4.125 .562
00-292-0808 .750 1.579 .250 * Leather or Rubber sealing elements.
00-781-4524 .750 1.250 .250 Cadmium treated Steel case.
00-961-9801 1.250 1.750 .375
00-922-3497 3.250 4.500 .468 DOUBLE #14-ANGULAR/OPPOSED SEALING ELEMENTS. Steel case
and two Synthetic Rubber sealing elements with springs. Shaft speed
SINGLE #4-ANGULAR SEALING ELEMENT. Steel case and Synthetic (Spd) as shown in thousands of feet per minute.
Rubber sealing element with springs. Size/In. HB/In. W/In. SPD
00-963-6886 2.000 3.000 .625 3
Synthetic Rubber Sealing Elements 01-004-5031 2.187 2.875 .375 3
Shaft speed ratings to 2000 fpm except where noted. DOUBLE #15-ANGULAR/OPPOSED SEALING ELEMENTS. Steel case
and two Synthetic Rubber sealing elements with springs. Shaft speed
Size/In. HB/In. W/In.
(Spd) as shown in thousands of feet per minute.
00-262-4953* .562 1.125 .375
00-077-0606 .875 1.250 .188 Size/In. HB/In. W/In. SPD
00-292-0816 1.370 2.000 .343 00-364-9798 3.000 4.000 .688 1
00-599-5062 1.875 2.623 .500 00-012-9521 4.687 5.750 .812
00-584-2060 2.312 3.251 .500
00-179-0952 2.875 4.303 .470 DOUBLE #16-VERTICAL/EXTERNAL SEALING ELEMENTS. Steel case
* Shaft speed 1000 fpm, Cadmium treated
Steel case. with two Synthetic Rubber sealing elements. Temperature rated minus 65
to 225 degrees Fahrenheit. Shaft speed not rated.
Shaft speed ratings to 3000 fpm. Size/In. HB/In. W/In. SPD
Size/In. HB/In. W/In. 00-891-7826 3.307 4.375 .662
00-154-3110 .500 1.000 .312
00-178-3782 .562 1.125 .312 SHOULDERED CASE SEAL STYLES
00-285-9495 .750 1.250 .312
00-297-9853 1.000 1.500 .312 SHOULDERED CASES
00-576-8337* 1.062 1.562 .375
00-178-3879 1.062 1.625 .375 SINGLE #1-VERTICAL SEALING ELEMENT. Corrosion Resistant Steel
00-033-7080 1.250 2.000 .375 case (CRES) and a Synthetic Rubber sealing element with spring. Shaft
00-549-8050 1.469 2.250 .375 speed not rated. Temperature rated minus 40 to plus 400 degrees
00-291-9049 1.500 2.250 .375 Fahrenheit.
00-286-6868 1.625 2.374 .500
00-179-1430 2.500 3.500 .500 Size/In. HB/In. W/In. SPD
00-726-3126 2.863 4.730 .500 01-026-0579 1.125 2.062 .438
00-596-7738 4.188 5.500 .500
00-282-5906 4.688 5.750 .562 RECESSED CASE SEAL STYLES
* Cadmium treated Steel case.
SINGLE #4-ANGULAR SEALING ELEMENT. Steel case except where
Shaft speed ratings to 3600 fpm. noted. Synthetic Rubber (except where noted) sealing element with spring.
Size/In. HB/In. W/In. Shaft speed (Spd) as indicated in thousands of feet per minute.
00-808-7595 .625 1.124 .375 Size/In. HB/In. W/In. SPD
00-752-9032 2.125 3.061 .500 01-077-3910 .625 1.575 .312
00-549-8049 1.812 3.132 .380 3
Shaft speed not rated. 00-045-4027* 9.000 10.750 .750
* Aluminum Alloy 5052 recessed case.
Size/In. HB/In. W/In. Sealing element material unknown.
00-097-9838 1.188 1.812 .250
01-047-6088 1.250 1.687 .250 DOUBLE #14-ANGULAR/OPPOSED SEALING ELEMENTS. Steel case
00-792-9841 1.875 unk .312 and two Synthetic Rubber sealing elements with springs. Shaft speed to
00-212-0166 2.000 2.875 .375 2000 fpm. Temperature rated from minus minus 65 to 225 degrees
00-246-6380* 2.273 2.657 .250
Fahrenheit.
00-818-7478 4.000 5.000 .500
00-923-0880 3.000 unk .313 Size/In. HB/In. W/In. SPD
* Copper Alloy case.
01-052-0043 3.500 4.626 .437 2
Rubber coated Steel case.
2-130
CLASS 5330
SHEET, NONMETALLIC,
PROTECTIVE
Fiber, nonasbestos.
Lg/In. W/In.
01-386-5379 50.0 50.0
2-131
2-132
Phone (215) 737-2336
DSN 444-2336
CLASS 5340
HARDWARE, COMMERCIAL
ANODE, CORROSION 00-290-8243 inch minimum. Plate mounted.

PREVENTIVE
Segmented disc machined formed interlocking
Zinc, Galvanic protectors primarily for corrosion core. 1.157 inches long, mounted by number
prevention in seawater of ship hulls, Steel and 12-28 UNF threaded end.
Aluminum equipment and structures, and
seawater side of condensers and other heat Dia
exchangers. 00-682-2174 1.050
CAST-IN-CORES PLAIN NO CORES

00-654-2948 5/16-24 UNF-2A
Segmented disc machine formed interlocking Rod type, extruded, drawn or cast, without
core. 1.157 inches long, suspended by number thread, 72 inches long.
12-28 UNF threaded end.
Dia
Dia/In. 00-813-6053 .405
00-725-3998 .625 00-813-6054 .675
00-725-3999 .825 00-813-6055 .840
00-813-6056 1.050
Square slab 1 inch thick with pipe core, for heat
exchanger or fair water disc. Rod type threaded end with 3/8-18 NPT solid 00-019-6299* 1/4-28 UNF-2A
construction. * Hole mounted
Lg/In.
00-543-3032 6 Dia
01-068-1252 5.380 BOLT, BARREL
Circular slab 1 inch thick with pipe core.
Rod type, threaded end, .840 inch diameter, with Screws furnished.
Lg/In. 1/2-14 NPT threads.
00-527-2368 2
00-582-2012 3 Lg
00-582-2011* 4 00-796-4354 3.000
00-527-2366 5 00-222-0717 4.000
00-702-1371 6 00-576-1750 4.500
00-702-1372 9 00-576-1749 6.500
Brass.
00-702-1664 11
* With heat exchanger slab pipe core. .625 inch diameter with 9/16-18. NPT threads. Lg/In. W/In.
Lg 00-240-2309 2.125 1.000
Circular slab 1.120 inches thick with pipe core. 00-240-2310 2.500 1.000
00-390-0727 2.000
00-240-2313 3.000 1.125
Lg/In.
00-240-2314 4.000 1.125
00-536-4473 6 .750 inch diameter with 9/16-11 UNC-2A
threads.
Steel, Zinc Plated.
Semi-Circular slab 1 inch thick with pipe.
Lg/In.
Lg/In. W/In.
Lg/In. 00-278-1224* 3.938
* Furnished with a neoprene washer. 00-240-2307 2.500 1.000
00-702-1665 15 00-240-2305 3.000 1.125
.750 inch diameter with 3/4-14 NPT, with square 00-240-2306 4.000 1.125
Hull slab. 6 inches wide, 12 inches long with
strap core. drive.
BOOT, DUST AND MOISTURE
Thk Lg
SEAL
00-813-6058 1.250 00-278-1226 2.750
00-486-0957 2.500 Rubber Silicone body with a compound sealing
Slab type, 48 inches long. method. Through hole expandable style. 1.625
Hull slab. 1.250 inches thick, 6 inches wide, 12 inches high 1 inch outside diameter and .215
Thk/In. W/In.
inches long. Suspended with two Zinc Plated inch inside diameter. Base outside diameter .938
Steel straps. 00-290-3793 .500 24
inch and .750 inch base inside diameter.
00-277-7559 BOLT ASSEMBLY, CLAMP

Slab type, with strap core, strap mounted. 1.250 CRES Steel bolt, clevis, collar, and Cadmium
inches thick, 3.000 inches wide, 12 inches long. Plated nut. Designed for material thickness 1
2-133
CLASS 5340
BUMPER, NONMETALLIC BUTTON, PLUG
White Plastic, .266 inches shank length by .250
inch shank diameter by .531 inch overall height.
Flange outside diameter .500 inches.
00-948-0091
00-979-3518 Copper Alloy.
Flat top, .485 inch height, with a flange outside Prong
Rubber Silicone, compression mounting diameter of .625 inches. ID/In. Thk/In. Qty
method. Through hole expandable style. 1.469 00-935-3886 .500 .120 6
inches high 2 inches outside diameter and .875 00-728-0949
inch inside diameter. Base outside diameter Steel.
2.875 inches and 1.875 inch base inside Black natural Rubber, round top, flanged.
diameter. Prong
ID/In. Thk/In. Qty
00-615-6762 00-680-2940 .500 .062 8
00-290-4532 .875 .062 12
BRACKET, ANGLE
Steel, Cadmium or Zinc Plated.
Aluminum Alloy 90 degree angle bracket. First Prong
leg: .625 inches long by .500 inches wide by .063 Shank
Lg Dia H OD ID/In. Thk/In. Qty
inches thick, .204 inch diameter hole. Second 00-281-9892 .250 .054 6
leg: .690 inches long by .500 inches wide. .063 00-499-0073 .187 .187 .312 .312
00-286-4079 .188 .188 .406 .500 00-290-4545 .750 .065 12
inch thick, .204 inch diameter hole. .250 inch 00-286-4158 .875 .148 12
radius, both ends. 00-663-2428 1.000 .070 12
Black natural Rubber, flat top, counter bored.
00-270-8544 1.125 .064 12
00-282-7409 1.250 .078 12
Steel, Nickel Plated.

Prong
ID/In. Thk/In. Qty
00-598-8251 00-466-3936 .500 .049 8
00-868-0384 .750 .078 12
Steel Composition, Passivated. Bored
ID H OD Depth 00-816-3424 1.000 .070 12
First leg: .750 inches long by .620 inches wide by 00-550-8485 .138 .313 .625 .250
.063 inches thick, with .219 inch diameter hole.
CAP, PROTECTIVE, DUST AND
Second leg: .730 inches long by .620 inches Double flange style. Buna Rubber Groove .250 MOISTURE SEAL
wide by .063 inches thick, with .344 inch inch diameter, .337 inches high, Top flange .062
diameter hole. .435 inch radius, both ends. Used inches wide by .440 inch diameter. Bottom flange Designed to fit over openings. For protecting
on aircraft engines. .150 inches wide by .340 inch diameter. threads, flares, tapered and straight surfaces
from intrusion of dirt, moisture and foreign matter
00-981-9100 during storage. NOT DESIGNED TO RETAIN
FLUID UNDER PRESSURE.
BUCKLE
Aluminum, threaded type. Dimensions shown
Steel, Black enameled. .750 inches long by are given in the following order: thread size or
1.266 inches wide. Strap accommodation width 01-062-3628 outside diameter of tube for which designed,
1 inch. length of inside diameter, and outside diameter.
Oblong.
ID
Thd Lg OD
Rubber bumper 1.080 inches long by 1.400
00-804-0790 3/8-24 NF .380 .875
inches wide and .640 inches high. Bumper has a
01-081-8282 7/16-20 UNF .380
hole .580 inches in diameter centered .700
01-016-8180* 9/16-18 UNF .380
inches from edge along length and .500 inches 00-682-2116 3/4-16 NPT .750 .875
from edge along width. 00-804-0768 7/8-14 UNF A/A 1.438
00-664-6395 00-682-2118 1-1/16-12 .750 1.250
UNF
* Outside surface knurled
Anodized Aluminum Alloy. 1.625 inches long by
Outside surface serrated
any acceptable width. Strap accommodation
width 1 inch.
Brass, threaded type.
Thd ID OD
01-225-1324 00-218-5907* 1-8 UNC .615 1.395
* Outside surface serrated
Plastic, friction type, Non Spec.
00-914-9315
2-134
CLASS 5340
Thd ID OD ID OD Lg
00-395-2969 .240 .183 .420 01-183-0978 .803 .975 .620
00-855-0805 .516 .440 .720 00-171-2436 1.028 1.094 .446
00-720-5946 .531 .625 .596 01-238-3768 1.030 1.215 .750
01-194-3200 1.161 1.355 .750
Plastic, friction type. 01-194-3201 1.384 1.600 .880
01-213-9668 1.498 1.682 .750
Tube ID Lg OD 00-290-7263 2.688 2.457 1.000
00-837-9408 .853 .500 1.125
00-660-5248 1.236 .531 1.469 Plastic, Non Spec Items. Wheel Load
R - Red Dia Eff Ht Lbs
ID OD Lg
00-576-9986 2 3
Plastic, friction type. 01-013-3904 .250 .500 .500
00-291-3642 .960 .915 .687
Tube ID Lg OD 00-770-9180 1.217 1.150 .656 CATCH, CLAMPING
00-324-9158 .413 .575 .685 00-290-7249 1.402 1.312 .875
00-211-8188 .605 .500 .840 00-914-5748 1.528 1.452 .625 Steel body and hook, Bronze cam. Cadmium
00-213-8881 .720 .500 .970 00-815-0890 1.649 1.580 .625 Plated. 1.781 inches long by 1.500 inches wide
00-493-5835 .850 .500 1.125 00-685-0707 1.807 1.730 .625 by .625 inches high. With two .125 inch diameter
00-481-8934 .785 .625 1.031 00-078-0046 1.903 2.198 .500 mounting holes. Claw engaging, lever operating.
00-496-5832 .893 .625 1.125 00-637-0880 2.750 3.125 .375
00-200-5904 .973 .500 1.220 00-655-8157 3.080 2.995 .750
00-193-0783 1.093 .562 1.330 00-837-3116 3.517 3.225 1.125
00-051-0029 1.150 .625 1.405
00-494-7597 1.270 .625 1.500 CASTOR, RIGID
00-437-6461 1.340 .562 1.590
00-889-8677 1.463 .562 1.700
Single wheel with ball bearing, solid Rubber
01-046-5888 1.715 .562 1.949
01-041-9514 1.648 .625 1.875 wheel, steel body, and rectangular plate with
00-687-1148 1.965 .562 2.229 countersunk ends. Wheel diameter and effective 00-809-2189
00-682-2473 2.215 .599 2.435 height in inches and safe operating load capacity
Y - Yellow, R - Red listed in pounds. Chromium Steel Alloy. 3.625 inches long by
Wheel Eff Load 1.875 inches with by .625 inches high. Three
Plastic, friction type. Dia Ht Lbs .218 inch diameter mounting holes. Loop
engaging, lever operated.
Tube ID Lg OD 00-985-6735 4 7 400
00-052-3033 1.222 .560 1.460
CASTER, SWIVEL
Plastic, threaded style. Thread size, inside
diameter length, and overall diameter listed in Single wheel with ball, roller, or plain, self
inches. lubricating bearing. Steel body and plate or
stem. Rubber wheel, unless noted. Without lock
ID
Thd Lg OD brake.
00-515-0525* 3/8-24 UNF .438 .500
Flat mounting plate
01-112-2822 7/16-20 UNF .250 00-205-5223
00-111-2211* 1/2-20 UNF .156 .562
00-727-4774 1/2-20 UNF .500 .563 Steel with Chromate and Cadmium surface
* Outside surface serrated treatment. 1.906 inches long by 1.500 inches
wide by .625 inches high. with two .130 inch
CAP-PLUG, PROTECTIVE, DUST mounting holes. Catch .937 inches with Wing nut
AND MOISTURE SEAL 1.937 inches. With claw engaging, wing nut
operated.
Designed to fit into and over openings. For Wheel Load
protecting threads, flares, tapered and straight Dia Eff Ht Lbs
surfaces from intrusion of dirt, moisture and
00-598-6368 2 2.625
foreign matter during storage. NOT DESIGNED
00-985-6736 3.5 4.625 250
TO RETAIN FLUID UNDER PRESSURE.
00-205-5628 4 5.062 175
00-810-4188 4 5.250 400
Plastic. 00-720-7896* 4 5.250 400
ID OD Lg 00-804-2244 6 7.375 340
01-079-1758* 8 10.250 560
00-515-0525 .438 .500 00-812-3874 8 10.250 1200
01-065-9917 .235 .365 .380 00-848-6017 12.6 12.500 390
00-727-4774 .500 .563 * With wheel lock 00-821-0304
00-664-0671 .500 .625 With pneumatic tire
01-063-1192 .356 .485 .380 Steel, Cadmium Plated. 2.031 inches long by
01-085-4234 .485 .471 .440 .625 inches high. With three .130 mounting
Grip neck stem mounting.
01-043-7077 .487 .631 .500 holes. Catch size 1.437 inches long by .500
01-105-9613 .518 .667 .500 inches. With .193 inches high Claw engaging
00-726-2214 .726 .690 .562 type, wing nut operated.
01-039-0334 .687 .848 .560
01-043-7078 .740 .911 .620 00-680-4375
2-135
CLASS 5340
Steel, Cadmium Plated. 2.063 inches long by Aluminum Alloy, .375 inches wide by .031 inches
.406 inches high by 1.125 inches wide. With two Lever Bolt thick.
Offset Offset
.131 inch diameter holes. Loop engaging, lever
operated. 01-022-3301 .080 .261 ID
00-194-4265 1.000
Steel, CRES, Passivated. Mounting base 1.770 00-193-0095 2.000
inches long by 1.460 inches wide. Mounting hole 00-193-0120 3.000
.128 inch diameter center to center distance
between mounting holes along the length 1.390 Steel Composition, painted, .187 inches wide.
inches by 1.020 inches along the width.
ID
Lever Bolt 00-382-1710 1.750
Offset Offset
00-063-9627 .090 .312 SINGLE LOOP
00-975-2126
Steel, Cadmium Plated. Mounting base 2.154 Plain Plastic band without cushion. .375 inches
Steel, Zinc and Chromate surface treatment. inches long by 1.438 inches wide. Mounting hole wide except as indicated.
2.500 inches long by .531 inches high by 1.438 .098 inch diameter. Center to center distance
inches wide. Loop engaging, lever with spring. between mounting holes along the length 1.125
00-760-9241 Lever Bolt
Offset Offset
CATCH, FLUSH 00-025-2160 .040 .156
ID
BUTTON ACTUATOR STYLE CLAMP, BRIDGE 00-619-7754 .190
00-782-8737 .250
Steel, CRES body, anodized Aluminum button. Iron material, flat style with a .437 inch diameter 00-969-6502 .312
Mounting base 1.380 inches, square. Mounting hole in the center. 1.687 inches long by .875 00-964-2555 .375
hole .128 inches diameter center to center inches wide. Inside length 1.375 inches with a 00-964-2557 .500
distance between mounting holes along the .468 inch height.
width and length 1.060 inches. WEDGE TYPE
Aluminum Alloy with Chloroprene rubber

cushion, .500 inches wide except as indicated.
ID
01-046-5903 .563
Steel, with rubber cushion.

00-066-1457
Lever Bolt ID
Offset Offset CLAMP, INSTRUMENT MOUNTING 01-044-7973 .313
00-872-7937 .063 .123 01-048-0795* .438
00-232-0681 .063 .279 Aluminum Alloy, anodized. 1.500 inch size for * .375 inches wide
00-333-6426 .140 .577 .125 inch thick panel mounting. Nonstandard
01-137-9792 .180 .380 size instrument case. 1 inch band width by .020 CRES, with Plastic cushion.
inches thick. Overall 2.047 inches wide, with
ID
Steel, CRES, Aluminum button and floor plate. 10-32 adjusting screw, and 6-32 NC-2B thread
Mounting base 1.770 inches long by 1.460 size mounting hole. 01-013-7424* .188
00-103-2945* .250
inches wide, mounting hole .128 inch diameter,
00-937-1348 * .375 inches wide
center to center distance along the length 1.394
Aluminum Alloy, anodized. 2.000 inch size for Steel Composition, .500 inches wide.
.250 inch thick panel mounting. Nonstandard ID
size instrument case. 1 inch band width by .065
inches thick. 2.750 inches wide, with 10-32 00-597-0055 .250
adjusting screw and 8-32 UNC-2B thread size 00-597-9385 .438
mounting hole. 00-881-5026* .500
00-584-6563 .562
01-019-2658 1.375
00-014-5970
* Plastic cushion
Lever Bolt CLAMP, LOOP Plastic with ribbed inside diameter. Natural color
Offset Offset .500 inches wide.
00-074-1576 .032 .312 Center mount. Tongue hole type, round,
00-075-3690 .050 .190 unthreaded. ID
00-543-3931 .188
Steel, CRES, Aluminum button. Mounting base 00-988-3210 .250
1.380 inches square. Mounting hole diameter 00-543-3934 .500
.128 inches. Center to center distance along 00-530-6833 .562
length 1.060 inches. 00-964-3664 .688
OFFSET MOUNT
2-136
CLASS 5340
Rubber wedge type cushion. Intended for use in inches. Fork span .161 inches wide. Width .322
general aircraft applications including electrical ID inches, Rod connection thread number.
systems. 00-579-1531 .125 10-32-UNF-3A by .500 inches long. Pivot pin
hole diameter .191 inches.
Steel, CRES band, Rubber Fluorosilicone
cushion .500 inches wide. For elevated
temperature usage in petroleum based fluid
areas. Unaffected by ozone.
ID
Aluminum Alloy band, Chloroprene cushion 00-104-5060* .313
00-068-0529
00-103-2976* .375
(Black color with Blue identifier). For general
01-161-6234* .438
purpose use, .500 inches wide. Resistant to Steel, Cadmium Plated. Shank .677 inch
01-160-0398* .500
petroleum based and hydraulic fluids and ozone. 01-156-5482 .625 diameter by 1.590 inches long. End radius .500
Do not use on Titanium tubing. 01-156-5481 .688 inch, fork span .280 inches and overall width
00-254-5025 .750 .750 inches. Rod connection thread 3/4-16
ID UNF-2A by .750 inches long. Pivot pin hole
00-165-7671 .813
00-291-5353 .123 01-156-5483 1.000 diameter .375 inches. and rod comes with 1 set
00-291-5322 .188 00-254-5017 1.313 screw.
00-291-5323 .250 00-223-1286 2.000
00-200-8560 .313 * .375 inches wide 00-895-9345
00-598-0146 .375
00-200-8559 .438 Steel, CRES, Passivated. Shank .625 inch
Aluminum band, .500 inches wide. Weather
00-291-5347 .500 diameter by 1.810 inches long. End radius .500
resistant Chloroprene cushion.
00-584-6556 .625 inches, fork span .939 inches and overall width
00-664-8163 .688 ID 1.439 inches. Rod connection thread 5/8-24
00-286-9427 .750 UNJEFO-3A by 1.690 inches long. Pivot hole
00-598-4201 .688
00-286-9421 .813 diameter .312 inches.
00-286-9424 .875
00-664-8164 .938 Steel, two piece.
00-286-9418 1.000
00-200-7451 1.063
00-200-7449 1.125
01-061-2296 1.188
00-664-8188 1.250
00-200-3045 1.500 00-372-8629
00-200-3041 1.625
00-598-0529 1.750 CLIP, RETAINING
00-579-9678 2.000
00-515-0595 2.250 ID W
00-061-2839 1.750 .687
Aluminum band, Nitrite cushion. Fuel and heat 00-358-5711 2.625 .750
resistant. .500 inches wide. 00-152-0457* 3.000 .750
* Cadmium and Chromate Treated
ID
00-845-2072 .125 CLEVIS, ROD END
00-286-9416 1.500
H Dia
Steel. Shank diameter .375 inches. End radius
Steel, low carbon band, Chloroprene cushion .250 inch Fork span .141 inches wide. Overall 00-619-7031 1.223 .029
(Black color with Blue identifier). For general .312 inches wide. Pivot pinhole center to rod end 00-010-3090 2.105 .029
purpose use .500 inches wide. Resistant to 1.875 inches. Fork arm .085 inches thick by 1
petroleum based and hydraulic fluids and ozone. inch long. Rod connection thread 1/4-28 Steel, Cadmium with Chromate.
Do not use on titanium tubing. UNF-3B, .875 inches long. Pivot pin hole .188 H Dia
ID inch diameter.
01-303-7765 1.750 .059
00-664-9056* .375
00-291-5348 .500
* .375 inches wide
Steel Composition band, Silicone cushion.

(Natural White color). .500 inches wide. For
elevated temperature usage in phosphate ester
based fluid areas. Unaffected by ozone. 00-838-1591
H W Dia
ID Steel. Shank .500 inch diameter, end radius .375
inches, fork span .569 inches wide. Overall 1.062 00-014-2583 .625 .188 .048
00-988-0388* .563
00-052-4020* .938 inches wide, rod connection thread 5/16-24
01-163-5499 1.250 UNF-3B by .602 inches long. Pivot pin hole .438 CLIP, SPRING TENSION
* Non Spec item inch diameter.
Flat concave style. Steel, .562 inches wide by
Steel Composition, Cadmium treated band, 00-662-9735 .594 inches high by 1 inches long, and .062
plastic cushion .375 inches wide. For elevated inches thick.
temperature usage in phosphate ester based Steel, Cadmium Plated. Shank .136 inch
fluid areas. Unaffected by ozone. diameter by 1.622 inches long. End radius .250 00-112-1382
2-137
CLASS 5340
Steel, Nickel surface treatment. CONNECTOR, ROD END Iron Alloy. Style A latch.
Ret
Steel, overall. 1.500 inch height by .990 inch ID Thk
width, end radius .750 inch, rod connection
00-118-6659 3.340 .063
thread 1/2-13 UNC-2B by .625 inch length,
securing pin hole .113 inch diameter.
FOUR SEGMENT
Steel Style A latch.

Hole
Size/In. Loop Hold/In. Ret
00-725-6033* .103 .375 ID Thk
00-835-3638 .125 .187 00-307-0778 6.750 .040
00-854-6701 .125 .500 01-032-6083 7.680 .050
00-329-2136 .147 .625
00-584-9400 .156 .750 00-398-9396
00-801-7545 .188 1.250 CUP, COMPRESSION
00-847-0102 .188 1.500 COUPLING, CLAMP, GROOVED
* Cadmium and Chromate Plated. Rubber, synthetic. 80 nominal durometer
hardness rating. Base outside diameter 8.234
CRES. Single V grooved metal loop. For inches by .054 inches thick. Center hole
Steel, Unplated. creating a fluid tight joint with ducts, pipe, tank diameter 7.516 inches wide and .375 inches
Hole covers, etc. overall length.
Size/In. Loop Hold/In.
01-005-3118 .188 1.063 TWO SEGMENT 01-057-1356
U-Shaped style. Brass, .375 inches wide by .500

inches high by .572 inches long, and .031 inches
DISK, SOLID, PLAIN
thick.
Polyamide Nylon.
ID Thk
00-788-1380 .069 .060
00-788-1377 .120 .093
Style A latch. Inside diameter and retainer
thickness in inches, and included angle 40 Steel.
00-695-3922 degrees except where noted.
ID Thk
00-838-9696 .415 .025
CLOSER, DOOR 00-197-4180 .562 .016
01-121-0176 1.000 .375
Air controlled type. Steel, CRES, passivated. 00-792-9020 1.608 .016
Surface mounting, 90 degree holding angle, 00-551-6146 1.693 .018
10.330 inches long, .875 inch tube diameter. Ret
Features press to release mechanism in rod or ID Thk Synthetic Rubber.
release ring at end of rod. 00-607-6225 4.620 .050
ID Thk
00-826-6181* 4.620 .080
00-014-9479 * 20 degree included angle 01-219-9943 .275 .080
Liquid controlled closing action. Aluminum Alloy, Style B latch. DOORSTOP

cast Iron or Steel case, without mounting
bracket. For left or right hand doors. Size and Nickel Plated Brass. Baseboard mounted. Screw
application listed.
shank attachment method. Hook/keeper
included. Left or right hand. 1.750 inch diameter
by 3.750 inches long.
Ret 00-369-5013
ID Thk
00-066-9611 2.812 .050
01-032-3895 3.960 .032 FASTENER, PAWL
01-032-3896 4.180 .040
01-013-4160 4.340 .040 Adjustable offset pawl.
00-846-8966 4.620 .050
00-000-0057 Size 2. Exterior doors (light 00-062-1847* 8.120 .050 Steel, Cadmium Plated, Grip handle actuating. 2
screen/combination storm * Iron Alloy mounting holes .257 inch diameter, spaced
doors) 36 inch width 1.875 inches apart. Mounting plate 1.250 inches
maximum, Interior doors 32 THREE SEGMENT wide by 2.500 inches high, 90 degree pawl
inch width maximum. swing, right hand operation.
00-000-0059 Size 4. Exterior doors 36 inch
width maximum, Interior doors
48 inch width maximum. 00-919-8173
00-000-0060 Size 5. Exterior doors 1-3/4
inches by 42 inches by 7 feet, Steel, Zinc Plated. T-handle actuating. Right or
and interior doors subject to left-hand operation. .875 inches long, mounting
strong drafts. plate 1.344 inches high.
2-138
CLASS 5340
00-780-4078
Grip handle actuating. Right or left-hand

operation. 1.812 inches long, Grip handle length
from mounting hole 1.437 inches by .625 inches
wide. 00-310-2147 2 Hole
00-113-6247 Bronze. 4.750 inch overall length. Screws

OD Drive H
furnished.
00-285-1838* 3.062 .281 .760
FERRULE, GROOVED CLAMP 00-285-1839 4.062 .312 .900
COUPLING 00-285-1836 4.750 .375 1.030
* 3 spokes at 120 degree angles.
Brass. Flanged, .750 inch overall length, flange
.125 inches long by .500 inch outside diameter:
.312 inch inside diameter. Wall .047 inches thick. HASP, HINGED
00-310-2142 2 Hole
Single safety hinge. Closed hasp conceals
00-352-8292
Bronze, 6.000 inch overall length. Screws screws, preventing removal. Screws furnished.
furnished. Sizes shown for closed position.
GLIDE, FURNITURE
Steel base, Rubber cushion. Grip plate
attachment device. 1.292 inch base diameter.
00-310-2143 4 Hole
Adjustable staple. Steel strap and pin.
Steel, Black Japan finish. 4.750 inch overall
length. Screws furnished.
Leg OD 00-622-9651 2 Hole

00-825-6503 1.000
Steel, Zinc surface. 6.500 inch overall length.
00-825-6504 1.125
01-177-9614 4 Hole
HANDLE, BAIL Lg/In.
HANDWHEEL 00-664-1707 3.500
Steel, Cadmium Plated. 90 degree bail swing, 00-664-1667 4.500
furnished with mounting plate and screws. Aluminum Alloy spoke type. 4 spokes at 90 00-664-1705 6.000
Dimensions for inside bail length and width of degree angles, with tapered square drive facility.
plate are listed in inches. Fixed staple. Steel strap/Brass pin, Zinc Plated
overall.
OD/In. Drive/In. H/In. Lg/In.

Lg W 00-285-1872 5.000 .375 .625 00-291-6521 3.500
00-285-1870 6.000 .437 .688 00-234-8430 4.500
00-251-7971 3.620 2.940
00-285-1871 7.000 .500 .750 00-234-8431 6.000
00-682-1502 4.500 4.190
Steel, CRES spoke type. 3 spokes at 120 degree Swivel staple. Steel strap, Brass pin, Zinc Plated
HANDLE, BOW angles. Square drive facility with diagonal overall.
corners. Reference marking Open/Arrow/CCW.
Brass, Nickel Plated. 3.688 inch overall length.
Handle clearance .844 inches attached by
1/4-20 UNC threaded studs, 3.000 inches on
center. Nuts furnished.
Lg/In.
00-234-8424 2.375
OD/In. Drive/In. H/In. 00-234-8425 4.500
00-802-1835 10.000 .624 2.125 00-234-8426 6.000
00-371-8105 Iron, cast, malleable. Grip type with 4 spokes at Swivel staple. Brass strap/pin, Nickel Plated.
90 degree angles. Square drive with diagonal Non Spec Item.
Bronze. 4 inch overall length. Furnished with two corner tapered 3/4 inches per feet. Lg/In.
Steel washer head machine screws. 00-264-7582 1.500
2-139
CLASS 5340
Single non-safety hinge. Screws furnished.
Sizes shown for closed position. Mtg
Size Hole
00-229-4246 3.000 x 3.000 6
00-229-4248 3.500 x 3.000 6
Brass body, CRES pin, Nickel Plated. Full

Mtg mortise mounting, with removable pin. Regular
Fixed staple. Steel strap/Brass pin, Zinc Plated Size Hole duty.
overall. 00-229-4224 1.500 x .875 4
00-223-4175 2.000 x 1.375 6
00-223-4174 3.000 x 2.125 6
Brass body, Steel pin. Nickel Plated body.

Swaged, with a full mortise mounting.
Mtg
Lg/In. Size Hole
00-234-8421 3.000 00-229-4292* 2.000 x 2.000 4 Mtg
00-229-4321 2.500 x 2.500 6 Size Hole
00-234-8427 6.000
00-229-4323 3.000 x 2.500 6 00-229-4354 4.000 x 4.000 8
00-229-4326 3.500 x 3.000 6
HINGE, BUTT * Full surface mounting Steel body, Brass/Steel pin. Zinc Coated.
Aluminum body, Steel pin, anodized. Full surface CRES body, Brass pin, Zinc pin, Full mortise Mtg
type, single action. Removable pin, without type. with screws. Size Hole
mounting holes. 00-229-4250 4.000 x 4.000 8
Mtg
Size Hole Steel body and pin, Primed for paint. Full mortise
00-664-6974 2.000 x 2.000 6 mounting, removable pin. Extra heavy duty.
Brass body and button tip, CRES pin. Nickel

Lg W Plated overall. Full mortise mounting, with
00-051-9133 72 1.250 removable pin. Regular duty.
00-069-5124 72 2.000
Aluminum body and pin. Mtg

Size Hole
Lg W 00-664-1328 3.000 x 3.000 6
01-053-7128 72 2.000
Aluminum body, CRES pin. Cadmium Plated pin.

Mtg
Lg W Size Hole
00-664-8121 72 1.062 00-229-4343* 2.000 x 1.500 4
00-664-8141 72 1.500 00-229-4344 2.000 x 2.000 4
00-551-6903* 72 3.718 00-229-4345 2.000 x 2.500 4
* Heavy duty * Half mortise mounting
Steel body and pin. Mtg

Steel body, CRES pin, Zinc Coated, Friction Size Hole
type. Non removable pin.
Lg W 00-664-1326 4.000 x 4.000 8
01-053-7130 72 1.500 Mtg
Size Hole Brass. Dull Bronze surface treatment. Full
Steel, Passivated. 00-598-6371 1.500 x 1.500 4 surface type mounting 72 inches long,
Nonremovable pins.
Lg W Brass body and button tip, Steel pin. Nickel
00-282-3753 48 1.500 Plated. Full mortise mounting, Removable pin.
00-839-3749 72 2.000 Regular duty.
Brass body and pin, lacquered. Full surface type,

single action. Nonremovable pin. 1 inch long by Size Mtg Hole
3.062 inches wide. 00-229-4370* 1.063 68
00-229-4372 1.500 68
00-229-4373 2.000 68
* Light Duty
Aluminum body, Steel pin. Cadmium Plated pin.

Mtg 22.750 inches long by 1.500 inches wide. 8
Size Hole holes.
00-369-4943 6 mtg holes 00-229-4353 3.500 x 3.500 6
00-471-0886
Brass body and pin. Full surface type. Steel body, Brass/Steel pin, Zinc Coated.
Nonremovable pins. Removable pin. Steel, Bright Brass Single action and adjustable
2-140
CLASS 5340
enclosed spring, Full surface mount.
Lg Thd Size Lg
00-251-7974 3.500 00-291-3484 1/4-28 .375
00-251-7975 5.000 00-290-4497 1/4-28 .500
00-251-7976 6.000 00-291-3495 5/16-24 .469
00-291-3492 3/8-24 .562
HOOK, SCREW 00-634-7860 7/16-20 .656
00-290-4511 7/16-20 .875
00-598-5634 1/2-20 .500
Copper Alloy, cup style with wood screw thread.
00-291-3488 1/2-20 .750
Mtg
Size Hole
UNIFIED COARSE - SCREW LOCK
00-252-3326 3.000 x 3.000 6
Thd Size Lg
HINGE, STRAP Proj 00-631-7894 No. 4-40 .168
Lg/In. Dia/In. Lg/In. 00-827-4024 No. 4-40 .224
Steel hinge, Zinc Plated. Brass or CRES pin. 00-815-4930 No. 6-32 .207
00-290-4138 .813 .072 .500
Screws furnished. Width at pin, and closed 00-558-8826 No. 6-32 .276
00-290-4140 1.188 .092 .750
length shown. 00-631-7891 No. 8-32 .164
00-290-4141 1.563 .121 1.000
00-815-4929 No. 8-32 .246
00-290-4143* 2.313 .162 1.500
00-721-6936 No. 8-32 .328
* Gimlet point
00-754-0847 1/4-20 .375
00-721-8352 1/4-20 .500
INSERT, SCREW THREAD 00-803-5574 5/16-18 .469
Mtg 00-210-3935 3/8-16 .375
Size Hole HELICAL COIL TYPE 00-754-1976 3/8-16 .562
00-240-2584 1.562 6 00-812-1894 3/8-16 .750
All helical-coil wire inserts listed here are 00-814-9865 1/2-13 .750
HOOK, COAT AND HAT Corrosion Resistant Stainless Steel. Selection is 00-772-4849 5/8-11 .625
made based upon internal screw thread size and
Two prong, wall type. Screws furnished. insert length. Dimensions and part numbers for UNIFIED - SCREW LOCK
coarse and fine (UNC and UNF) thread series
with free running internal threads are per Military Thd Size Lg
Standards. Refer to Class 5180 for helical coil 00-684-9501 No. 10-32 .190
insert repair kits. 00-800-7874 No. 10-32 .285
00-721-7653 No. 10-32 .380
UNIFIED COARSE, FREE RUNNING 00-210-3920 1/4-28 .250
00-829-2141 1/4-28 .375
00-721-7498 1/4-28 .500
00-218-1518 5/16-24 .312
00-264-0919 3.000 in. Zinc Alloy 01-073-2809 5/16-24 .469
00-754-1678* 1.625 in. Zinc Alloy and 00-847-0734 5/16-24 .469
Aluminum 00-754-1817 3/8-24 .375
* Chromium Plated Thd Size Lg 00-680-8768 3/8-24 .562
00-678-3310 7/16-20 .656
00-834-8372 No. 2-56 .172 00-678-3309 1/2-20 .750
Three prong, wall type. Screws furnished. 00-842-5920 No. 4-40 .168 00-723-6780 3/4-16 1.125
00-843-0003 No. 6-32 .138
00-734-5525 No. 6-32 .207
00-825-4826 No. 6-32 .276 KEY CHAIN AND REEL
00-479-9197 No. 8-32 .246
00-597-3304 No.10-24 .285 Chrome-Plated metal, or CRES. Key ring with
00-290-4478 No.10-24 .380 belt clip. 2 inch reel, 21.750 inch chain length.
00-200-7224 1/4-20 .250
01-030-6854 1/4-20 .375
00-240-5309 3.063 in. Aluminum 00-286-2458 1/4-20 .500
00-290-4489 1/4-20 .750
Two prong, wall type, with seperate screw 00-290-4521 5/16-18 .469
attachment. 00-290-4520 5/16-18 .625
00-331-4774 3/8-16 .375
00-244-2728 3 in. Bronze 00-290-4518 3/8-16 .562
00-990-7157 3/8-16 .750
HOOK, DOOR 00-290-4506 7/16-14 .656
00-290-4505 1/2-13 .500
00-290-4504 1/2-13 .750
Bronze, lacquered finish. Double jointed with 00-787-0148
00-990-7158 1/2-13 1.000
shoulder stop.
00-290-4494 5/8-11 .938
LATCH, RIM
UNIFIED FINE, FREE RUNNING
Brass or Bronze with Nickel finish. Pull knob
Thd Size Lg operated. 1.500 inch case width. Screws
00-986-2929 No. 10-32 .190 furnished.
00-597-3302 No. 10-32 .285
Lg 00-290-4480 No. 10-32 .380
00-290-0957 2.500 00-286-6600 1/4-28 .250
2-141
CLASS 5340
LOCK, FLUSH Steel case. Bronze front, knobs, roses and strike.
With stop. 2.375 inch backset. 2.250 inches. by 1
Brass case drawer locks. Dead bolt style, with inch front dimension.
lever tumbler locking mechanism operated from
outside by key. Plate is 2 inches long by 1.625 00-281-2193
inches wide. Thickness of member for which
designed shown below. Bolts furnished. LOCK SET, RIM
Ht/In.
00-240-2365 1.250
00-240-2364 2.000 Pin tumbler locking mechanism. Bronze keeper,
rose and strike. Case 2.312 inches high, 3.500
inches wide. Screws furnished. For 1.375 inch to
Brass, Chromium Plated. Lever handle
2 inch doors.
operated. 3 inch case width by 3 inches in height.
Furnished with screws for mounting and a hole
for a padlock.
Thk
00-285-7979
00-264-7586 .625
00-264-7587 .750
LEAF, BUTT HINGE 00-264-7588 .875
Aluminum Alloy, 1.445 pin center to body edge

distance. 5.68 overall length. Material .194 LOCK, RIM 00-264-7598 Bronze case
inches thick. Knuckles .374 inches long. Knuckle 00-664-7014 Cast Iron case
inside diameter .109 inches. Brass case. Dead bolt style, with lever tumbler
locking mechanism operated from outside by a Turn handle locking mechanism. Zinc Alloy case
01-317-3915 combination dial. Case is 2.250 inches high by Chrome Treated. 4.625 inches high by 2 inches
3.250 inches wide. Screws furnished. For wide.
shipboard safes and safe lockers.
LEVER HANDLE, LOCK 00-911-2443
Brass, Nickel Plated. 3.687 inches long.
Threaded end 3/8-16 NC-2A. MAGNETIC STRIP
00-369-4940 100 foot roll, .500 inches wide by .060 inches

thick.
LOCK, EXTERIOR 00-761-7471
00-264-7592
Corrosion Resistant Steel assembly except for
hardened Steel bolts and back plates. All parts, MOUNT, RESILIENT
Cadmium or Nickel Chrome Plated are coated LOCK SET, MORTISE
and will maintain lubricity from -200 degrees to Round type with flanged bushing two-hole
500 degrees Fahrenheit. Designed for use on Pin tumbler locking mechanism. Latch bolt style flange. Steel resilient member, Steel rigid
almost any type closure where padlocks or with regular bevel latch. Tubular case 2.125 inch member. Inside diameter .437 inches, mounting
shackle locks are required for high security diameter. Screws furnished. Door minimum hole diameter .213 inches, diameter by 2.800
purposes. thickness 1.375 inches. inches center to center, flange 2.240 inches
wide, 1.130 inches high.
Lock assembly consists of two interlocking Brass case, knobs, roses, strike, and spindle.
sections flush mounted directly to closures and a With stop. 2.375 inch backset, 2.250 inch by 1
pick-resistant locking cylinder. Lock can be inch front dimension.
welded with stainless steel rods or fastened with
3/8-16 NC carriage bolts and hexagon nuts.
Furnished with two keys for each lock, six

standard length (1, 1-1/2 and 2 inch) mounting
bolts, and two matching back plates. Overall
dimensions as shown. 00-788-0416 Flange 3.300 in. lg
Steel resilient member, Steel rigid member.

Inside diameter .750 inches, mounting hole
00-685-1202
diameter .656 inches by 5.374 inches center to
center. Flange length 6.500 inches by 4 inches
CRES case and front. Aluminum knobs, roses wide by .500 inches thick with overall height
and strike.With stop 2.750 inches backset, 2.250 3.125 inches.
inches. by 1.125 inches front dimension.
00-144-7310 4.500 in. x 3.500 in.
00-664-4473
00-847-2605
Rubber resilient member, Steel rigid member.
Steel case, Brass or Bronze front, knobs, roses, Inside diameter .641 inches, flange 5.875 inches
strike and thumb piece. With stop 2.437 long by 3.375 inches wide by .438 inches thick.
minimum backset, 2.250 inches by 1 inches front Mounting hole .516 inches in diameter by 4.750
dimension. inches center to center 2.500 inches high.
Frequency range 7.65 to 8.65 Hz. Load range 50
00-144-7311 6.437 in. x 3.500 in. 00-281-2194 to 100 pounds.
2-142
CLASS 5340
00-543-3574
Inside diameter .641 inches, flange 6.625 inches

long by 3.500 inches wide by .500 inches thick,
mounting hole .641 inch diameter by 5.375 inch.
Center to center 2.688 inches high. Maximum
frequency 7.45 Hz. Load rating 100 to 150
00-753-3609
pounds.
ROUND VERTICAL TYPE TWO-HOLE
00-543-3575 Case Shackle Case
FLANGE W Size Ht
Flange 6.500 inches long by 4 inches wide by 00-682-1508* 1.500 .750 1.250
Rubber resilient member, Steel rigid member. 01-004-5180* 1.500 2.500 1.344
.875 inches thick, Mounting hole .656 inch
Thread size 1/4-28, stud .062 inches long, 1 inch 00-682-1645 1.500 2.500 1.250
diameter by 5.375 inches center to center, 3.875
outside diameter, bushing .250 inches long, * With clevis and chain.
inches high. Load rating 100 to 450 pounds.
flange 2.750 inches long by 1.375 inches wide.
Mounting hole 2 center to center, 1.250 inches Steel shackle and case, Cadmium or Chrome
01-020-5589
high. Static load 8 pounds at .020 inch deflection. Plated.
Rubber resilient member, Steel rigid member. Case Shackle Case
Inside diameter .391 inches, flange 4.250 inches W Size Ht
long by 2.375 inches wide by .500 inches thick, 00-158-3807* 1.750 A/A 1.594
mounting hole .391 inch diameter by 3.500 00-158-3805 1.750 A/A 1.594
inches center to center. 2.375 inches high. Load * With clevis and chain.
rating 50 pounds.
00-473-3199 Steel shackle, high security, keyed. Case
00-687-5684 equipped with clevis and retaining chain. For use
ROUND WITH FLANGED BUSHING, TWO with hasp assemblies, high security, listed below.
Rubber resilient member, Steel rigid member. HOLE FLANGE
Inside diameter .281 inches, flange 2.750 inches Shrouded Shackle. With raised shoulders
long by 1.750 inches wide by .125 inches thick. Rubber resilient member, Steel rigid member. protecting front and sides of shackle.
Mounting hole .281 inch diameter by 2 inches Inside diameter .635 inches, flange 6.625 inches
center to center, .813 inches high. long by 3.500 inches wide by .438 inches thick.
Mounting hole .641 inch diameter by 5.365
01-063-8188 inches center to center, 3.266 inches in height.
Load rating 220 pounds.
Resilient member not rated, Steel rigid member.
Inside diameter .375 inch, flange 4.250 inches
long by 2.375 inches wide by .333 inches thick,
mounting hole .328 inches in diameter by 3.500
inches center to center. Frequency range 13.2 to
16.2 Hz. Maximum load 25 pounds. 01-217-5068
00-530-8810 Key operated, low security use. Shackle

00-531-9170 diameter may range from 1/4 to 3/8 inches,
Rubber resilient member. Anodized Aluminum shackle clearance from 3/4 to 1-1/2 inches. Solid
rigid member. Inside diameter .166 inches. or laminated case. Pin tumbler or disk tumbler.
Flange 1.654 inches long by 1.240 inches wide PADLOCK
by .034 inches thick. 1.414 inch mounting hole Steel.
Combination dial. Exposed regular shackle. With
centers. .141 inch diameter mounting holes.
combination key. 01-346-4611
Overall height .844. Static load rated 4 pounds at
.188 inch deflection.
Brass or Bronze.
01-346-7462
PADLOCK SET
Brass or Bronze case with regular shackle,
Steel shackle. unless noted. Clevis, 9 inch long chain furnished
with each padlock. For general purpose use.
00-633-8295 Case Case Dial Grandmaster keyed sets. Three different master
W Ht Qty keyed groups of individually keyed locks.
ROUND WITH FLANGE THREADED STUD. 00-292-0896 1.750 1.500 4 Furnished with 2 keys per lock, 2 master keys
00-285-6523 2.750 4.000 1 per group, 2 grandmaster keys per set.
Rubber resilient member, Steel rigid member. 00-514-2782* 1.750 1.750
Stud thread size 5/16-18 UNC-2A by .500 inches * Round face style .688 inch Case.
long one end, 5/16-18 UNC-2A by .750 inches
Brass or Bronze shackle and case, general use, Sets
other end.
keyed. Pin tumbler mechanism. Furnished with 00-406-6496 55 locks, 35/10/10
two keys. Clevis and chain provided as indicated
by an asterisk (*). 1.500 inch Case.
2-143
CLASS 5340
Sets Thd Dia
00-292-0904 30 locks, 15/10/5 * Non spec item. 00-957-0834* 5/8-11 UNC .770
00-409-3246 30 locks, 15/10*/5 * Non Spec Item
00-421-9382 40 locks, 20*/15/5 Copper Alloy overall. Hexagon drive end. Plain
00-292-0906 50 locks, 20/20/10 end 1-1/16-32 UNEF exterior thread, number THREADED TYPE, FLARELESS TUBE END
00-421-9382 50 locks, 20*/20/10 12-28 UNF internal thread.
* Long shackles only. Aluminum Alloy.
1.750 inch Case. 00-873-2557* Thd Dia

* Non spec item. 00-804-1238 7/16-20 NF .660
Sets
00-409-3247 80 locks, 45/20*/15
* Long shackles only PLUG, EXPANSION PLUG, VENT
Keyed alike sets. Steel, cup style. Steel, Cadmium with Chromate material. Round
shape, end connection threaded 1-14 UNS-2A.
Outside diameter 1.250 inches. Inside diameter
1.500 inch Case.
.688 inches and 1.525 inches long. Non Spec
Locks Keys/set Item.
00-682-1505 5 7
00-838-5266 10 2 00-334-5817
00-838-5267 20 2
OD H Thk
RETAINER, NUT AND BOLT
Master keyed sets. Individually keyed locks. 00-939-1192 .775 .312 .037
Furnished with 2 keys per lock, 2 master keys 00-728-3491* 2.014 .360 060
Material type and overall dimensions indicated.
per set. * CRES
Steel, Clip type.
1.500 inch Case. PLUG, PROTECTIVE DUST AND
MOISTURE SEAL
Locks
00-291-4213 5 FOR PROTECTING: Threads, flares, tapered
00-291-4214 10 and straight surfaces, from intrusion of dirt,
00-291-4211 20 moisture and foreign matter during storage. Also
00-291-4212 30 used to seal in anti-corrosion fluid in hydraulic
00-291-4209 40 units in storage and shipment. Serrated drive
00-291-4210 50
type, without gasket.
00-291-4204 100
Lg W Ht Thk
FRICTION TYPE 00-966-9587 .540 .520 .410 .020
PLATE, MOUNTING
Plastic. Steel, Cadmium Plated. Grip height .125 inches
Steel, 3 hole mounting, .312 diameter hole,
thread size .312-24. 12 inches long by 12 inches ID OD
wide by .875 inches thick. 00-945-4419* .125 .125
01-281-5116 1.500 1.600
01-340-6221 * Non Spec Item
THREADED TYPE, FLARED TUBE END

PLUG, ANODE RETAINING
Aluminum Alloy. Lg W Ht Thk
Copper-Nickel Alloy. Hex head wrenching facility,
with internal thread through bottom of plug. For Thd Dia 00-788-8385 .706 .578 .354 .009
use in corrosion protection of heat exchangers 00-804-1229 5/16-24 NF .530
and other equipment using sea water. Steel, Cadmium and Chromate Plated. Grip
00-804-1224 3/8-24 NF .595
height .125 inches.
00-292-3292 9/16-18 UNF .750
00-828-8802* 3/4-16 UNF 1.065
00-804-1230 7/8-14 UNF 1.438
00-008-7123 1-1/16-12 UN 1.750
00-804-1245 1-5/16-12 UN 2.063
* Shoulder included
For ZDM type anodes. Copper Alloy, Inverted Plastic.

flare. 3/4-12 NPT exterior threads, number 12-28
UNF interior threads. Thd Dia
00-597-9433* 7/16-20 UNF .875
00-753-3920 01-167-9321 1/2-20UNF .810 Lg W Ht Thk
00-917-9763 1/2-20 UNF .700 00-809-4390 .720 .578 .359 .012
Aluminum and Copper overall. Plain end. 00-682-1857* 9/16-18 UNF .890
1-1/16-12 UN exterior threads, 3/8-18 NPT 00-804-1236 3/4-16 NF 1.250 SEAL, ANTI-PILFERAGE
interior threads. * Shoulder included
BALL TYPE. Embossed U.S. Navy and with
Steel and Plastic. serial numbers. Primarily used as a railroad car
00-688-0004* seal.
2-144
CLASS 5340
Lg Loop ID
01-187-9402* 1.984 1.093 x .281
* Connection end in same plane as
hook end.
00-081-3381
Brass. 3.625 inches long .750 inch inside
diameter of eye. Furnished with sliding bolt and
FLAT TYPE. Embossed with U.S. and serial unattached ring. Lg Eye ID
numbered. 01-016-8473 3.560 .375 x 1.000
STRAP, LINE SUPPORTING

Nylon strap and buckle material. Self clinching
style. Black color.
00-662-9817
00-275-4583 Lg/In. W/In. Thk/In.
01-228-6118 3.750 .094 .045
LEAD. Circular shape with attaching wire. With 2
Aluminum, Bronze or Steel. 6.500 inches long 01-234-7725 7.500 .188 .055
holes.
1.125 inch inside diameter of eye. Sliding bolt 01-235-1359 11.500 .188 .055
with an open eye on one side.
STRAP, RETAINING
Curved arch style.
SEAL, STRAPPING
Steel, CRES. With ears, and to be used with
Band-it Tool. Any acceptable length. 00-200-8823
OPEN DESIGN Iron malleable. Cadmium Plated. 5.000 inches Nickel Alloy.
long overall, .500 inches inside diameter of eye.
W/In. Inside
00-244-7324 .375 Steel. Cadmium Plated. 3.562 inches long, 1.750 Ht/In. Lg/In. W/In. Thk/In.
00-244-7325 .500 inches long by .375 inches, with attaching loop. 00-629-9907 .970 4.020 .580 .063
00-244-7326 .625
00-244-7327 .750 Curved arch style. Steel, Cadmium Plated.
CLOSED DESIGN
Strap W Lg W
00-664-3250 .500 .813 .625
00-664-3249 .625 .750 .813
00-205-5573
SLIDE, DRAWER, EXTENSION Inside
Steel. Galvanized eye. Ht/In. Lg/In. W/In. Thk/In.
SOLID ROLLER TYPE. Aluminum Alloy, 00-836-3941 .625 1.813 .688 .078
anodized. Bolt hole mounted. Left side except
where noted. Straight arch style. Aluminum Alloy, anodized.
Clo Lg Ext Lg H W
00-760-2683* 15.130 30.250 3.500 .500
01-031-0677 16.500 37.500 3.500 .437
01-028-7721* 16.500 37.500 3.500 .437
Lg Eye ID
* Right side
00-682-1686 5.625 1.000
00-291-3543 5.000 .750
SNAP, HOOK Inside
Steel, Cadmium plate. Ht/In. Lg/In. W/In. Thk/In.
Brass.
01-213-7101* .900 2.000 2.250 .500
* Threaded mounting holes with 2 captive
screws and washers.
HALF ARCH STYLE
Steel, galvanized.
Lg Loop ID Lg Eye ID
00-291-3551 2.094 1.125 x .281 01-034-6798 1.875 .406
Steel. Steel, Cadmium Plated.
2-145
CLASS 5340
Lg/In. W/In. H/In. Thk/In.
00-804-0995 1.500 1.016 2 .250
TURNBUCKLE
ALUMINUM
Hole
W Size Round closed body with hook and hook end
Lg/In. W/In. styles. Serrated wedge wire rope retention
01-015-9807 1.000 .375 01-072-9846 62 1 method. 8.500 inch long body. Furnished with 1
cotter pin, 2 nuts, 1 ring and pin, and 2 sister
SADDLE ARCH
STRAPPING hooks.
Steel.
Steel, CRES. Nailless type. 100 feet long.
Breaking
W Thk Str/Lb
00-245-9437 .375 .025 900 01-267-6232
00-245-9438 .500 .030 1500
00-245-9440 .750 .032 24000 BRONZE
Hexagon, closed body, clevis and clevis end

Inside STRIKE, CATCH
Ht/In. Lg/In. W/In. Thk/In. styles. With lock nuts, 4.562 inches take-up
distance with 6 inch long body. 11.625 inches
00-494-7430 .380 1.500 .500 .060 MORTISE STYLE
long overall with .562 inch fork span. 1/2-20 UNF
body threads.
STRAP, WEBBING Steel. 1.438 inches overall length by .500 inches
wide by .188 inches high: .090 inches thick 2
COTTON holes .133 inch diameter, Tongue .188 inches
long by .281 inches wide.
Olive drab and fungus resistant, Steel buckle.
00-292-5531
Lg/In. W/In.
00-769-8489 15 1.500
Round closed body, wire rope socket and clevis
end styles. With lock nuts and sister hook. Solid
Black color, fungus resistant, adjustable Steel
wedge wire rope retention. 6 inch take-up
buckle and end clips. 00-685-5899 distance. 7.625 inch long body. 3/8-8 ACME
Lg/In. W/In. body threads, .875 inch fork span. .438 inch wire
Steel, Cadmium Plated. 1.031 inches long by 1 rope accommodation. 19.562 inches long
00-772-7512 24 .750 inch wide by .422 inches high, .078 inches thick, overall.
tongue length .563 by .813 inches. Includes 2
Any acceptable color, moveable buckle and end mounting holes .203 inches in diameter.
clip.
Lg/In. W/In.
00-286-6894 35.875 .688
00-243-6704
Black color, fire, flame, and abrasion resistant.
1.062 inch fork span. .562 inch wire rope
Lg/In. W/In. 00-582-3934 accommodation. 21.094 inches long overall.
01-156-5313 50 .625
SURFACE STYLE 00-243-6705
NYLON
Brass 1.500 inches long by 1 inch wide by .187 Steel, Zinc Plated
Olive drab color with 4 buckle tongue holes in inches thick opening length .437 inches, tongue
each end. Used on fire control binoculars. width .843 inches, 2 countersunk mounting ROUND open body, clevis and clevis end styles.
holes .204 inches in diameter. With lock nuts. 4 inch takeup distance. 4.750 inch
Lg/In. W/In. long body, .375 inch fork span. .250 inch
00-764-6236 20 .750 diameter pinhole. 8.250 inches long overall.
1/4-20 UNC body threads.
Fungus resistant. Dark Green color, plain end.
Includes Anodized Aluminum buckle.
Lg/In. W/In. 00-369-4952
00-490-1678 80 1
Steel, Chrome Treated.
Mildew resistant, Gray color, Adjustable Steel, 00-188-0328
Zinc Coated buckle.
6 inch take-up distance, 7.125 inch long body,
.500 inch fork span, .328 inch diameter pinhole,
11.875 inches long overall. 3/8-16 UNC body
threads.
2-146
CLASS 5340
00-188-0330
6 inch take-up distance, 7.500 inch long body.

.625 inch. fork span, .390 inch diameter pinhole,
threads.
00-188-0331
9 inch take-up distance, 10.500 inch long body,

.625 inch fork span. .390 inch diameter pinhole.
threads.
00-188-0332
12 inch take-up distance. 13.500 inches long

body, .625 inch fork span, .390 inch diameter
pinhole. 19.313 inches long overall, 1/2-13 UNC
body threads.
00-188-0333
12 inch take-up distance. 13.875 inch long body,

.750 inch fork span, .515 inch diameter pinhole.
threads.
00-188-0336
TURNBUCKLE BODY
Round body with locking device.
Brass
Lg/In. UNF Thd
00-067-9875 2.250 No. 10-32
00-067-9878 2.250 1/4-28
00-067-9880 4.000 1/4-28
2-147
2-148
General Products Commodity Center
Phone (817) 978-2051
DSN 874-3697/3698
CLASS 5345
DISKS AND STONES, ABRASIVE
BELT, ABRASIVE DISK, ABRASIVE

Size
COATED ABRASIVE CLOTH BELTS used with COATED ABRASIVE DISKS. Metal working. 00-196-1700 7/8 x 7
power machines for sanding and finishing wood, Commonly used in portable sanding machines
metal and other materials. for polishing, grinding of materials, and cleanup Grit 120
of surfaces in maintenance and repair work.
01-117-4285* 3 in. dia
00-576-5387 7/8 x 7
Grit 150
00-187-3433 7/8 x 7
* Mounted on a Rubber holder pad.
ALUMINUM OXIDE ABRASIVE, closed coat.
Glue bonded Cotton Drill cloth backing. (Metal
DRESSER, CONTACT POINT
and woodworking).
Size ALUMINUM OXIDE ABRASIVE, closed coat. FLEXIBLE PLASTIC SHEET, with Aluminum
Glue bonded vulcanized fiber and cloth Oxide abrasive grit embedded on both sides.
Grit 36
combination backing.
00-753-5278 2 x 38-3/8 Size
Grit 16
Grit 40
00-558-5929 7/8 x 7
00-192-9341 3 x 24
00-881-7863 7/8 x 7 W/4 slots Grit 120
00-881-7582 7/8 x 9-1/8
Grit 50
Lg/In. W/In. Thk/In.
Grit 24 00-250-1345 4.500 .375 .025
00-838-1087 3 x 23-3/4
01-013-9040 5/8 x 4 W/4 slots
Grit 60 STONE ASSEMBLY, SHARPENING
00-558-5928 7/8 x 7
00-881-7862 7/8 x 7 W/4 slots
00-838-1086 3 x 23-3/4 Complete with cover, center section with
00-881-7581 7/8 x 9-1/8
00-192-9339 3 x 24 handles and nonskid base and one pint
00-881-7597 7/8 x 9-1/8 W/4 slots
lubricating oil. Has a lift out triangular spindle
Grit 80 fitted with 3 grit selections - coarse, medium and
Grit 36
fine. Each stone is 11-1/2 by 2-1/2 by 1/2 inches.
00-838-1085 3 x 23-3/4 Used for sharpening cutlery of all types.
00-881-8377 1/2 x 7
00-240-4683 6 x 48-5/16
01-013-9041 5/8 x 4 W/4 slots
00-196-1692 7/8 x 7 00-215-1881
Grit 100
00-238-5685 7/8 x 7 W/4 slots
00-881-7580 7/8 x 9-1/8
00-838-1084 3 x 23-3/4 STONE, COMMUTATOR
00-262-9455 3 x 24
Grit 50 SURFACING
Grit 120 PENCIL TYPE. Aluminum Oxide abrasive.
01-117-4284* 3 in. dia
00-196-1693 1/2 x 7
00-192-9345 3 x 23-3/4
00-881-8380 7/8 x 7
00-196-1674 7/8 x 9-1/8
Grit 280
Grit 60
00-185-7261 3 x 23-3/4
00-196-1696 7/8 x 7 Medium Cutting. Grit 90. Suitable for use where
ALUMINUM OXIDE ABRASIVE. Closed Coat. 00-881-7859 7/8 x 7 W/4 slots
Resin bonded Cotton Drill cloth backing. (Metal the MICA is slightly high or where the
working). commutator or Copper Alloy slip ring is slightly
Grit 80 rough or grooved and only a light cut need be
made.
Grit 50 00-196-1698 7/8 x 7
00-196-1678 7/8 x 9-1/8 Lg/In. W/In. Thk/In.
Size
00-597-9598 6.000 .625 .375
00-240-4685 6 x 48-5/16 Grit 100
Fine Finishing. Grit 120. Suitable for use as a fine
2-149
CLASS 5345
finishing stone for imparting the final polished MEDIUM. Round-edge slip. Unmounted. Rectangular, Unmounted.
surface to a commutator or Copper Alloy slip
ring. Lg/In. W/In. Thk/In. Edge Lg/In. W/In. Thk/In.
00-198-8056 4-500 1.750 .375 .125 00-584-4486 3.000 1.000 .312
Lg/In. W/In. Thk/In. 00-584-4520* 4-500 1.750 .375 .125
00-678-1893 5.000 1.000 .625 * Fine Knife-blade, Unmounted.
00-366-1393 5.000 2.000 1.000
SILICON-CARBIDE STONES, NON-OIL Lg/In. W/In. Thk/In.
Extra Fine Finishing Grit 220. Suitable for use as IMPREGNATED. 00-184-1374 3.500 .750 .187
an extra-fine finishing stone where it is essential
that commutators operate with a minimum of Triangular, Unmounted.
audio and radio noise.
Lg/In. W/In. Thk/In. 00-184-1372 3.250 .250 .250
00-174-0446 .625 .375 6.000
Round, Unmounted.
STONE, ELECTRICAL CONTACT MEDIUM. Rectangular, mounted in box. Lg/In. Dia/In.
BRUSH SEATER 00-198-8060 3.250 .250
01-352-4254 6.000 .375
ALUMINUM OXIDE MILD ABRASIVE. Intended 00-198-8040 8.000 2.000 1.000 01-023-2224* 6.000 .500
for finish-fitting of brushes to commutators and 01-016-9973 6.000 .500
collector rings. Rectangular, Unmounted. * Medium grit
Coarse grit
EXTRA-FINE
00-198-8057* 8.000 2.000 1.000
Lg/In. W/In. Thk/In. 00-292-2314 3.000 .750 .375 WHEEL, ABRASIVE
00-237-8701 .750 .500 4.750 00-198-8046 6.000 .625 .312
00-116-9230 6.000 1.000 .375 REINFORCED ABRASIVE WHEELS consisting
01-017-1495 6.000 1.000 .375 of abrasive particles, nonwoven Nylon fibers and
MEDIUM a resin binder.
01-023-2225 6.000 1.000 .375
Lg/In. W/In. Thk/In. 00-198-8048 6.000 2.000 1.000
00-262-6623 .500 .500 4.750 00-198-8058 8.000 2.000 1.000 ALUMINUM OXIDE STRAIGHT ABRASIVE
00-262-6622 1.125 .625 4.750 00-161-9695** 8.000 2.000 1.000 WHEELS. For removing corrosion from metal
00-198-8050 8.000 2.000 1.000 and for use where fine finish plus stock removal
* Coarse is required.
STONE, SHARPENING Fine
Ex-Fine/Cr Grit 100, FINE, 8000 RPM Maximum.
ABRASIVE STONES For sharpening edged Medium
tools and instruments. ** Fine/Coarse Hole
O/D Thk Dia
ALUMINUM OXIDE ABRASIVE, OIL FINE. Round-edge slip, unmounted. 00-732-9978 3.000 .750 .250
IMPREGNATED.
Lg/In. W/In. Thk/In. Edge Grit 280, Spec grade A, VERY FINE.
FINE, Unmounted, Flat. 00-183-8179 4.500 2.125 .625 .312
Hole
Lg/In. W/In. Thk/In. NATURAL ABRASIVE (NO VACULITE) HARD O/D Thk Dia
00-242-2555* 4.000 .312 .156 (SLOW CUTTING) STONES. NON-OIL 00-935-7869 2.000 .500 .250
* Half-round IMPREGNATED.
FINE/COARSE, Unmounted. Rectangular, Mounted.

Lg/In. W/In. Thk/In. Lg/In. W/In. Thk/In.
00-584-4580 6.000 2.000 1.000 00-265-3126 8.000 2.000 1.000
2-150
Phone (817) 978-2051
DSN 874-3697/3698
CLASS 5350
ABRASIVE MATERIALS
ABRASIVE CLOTH ASSORTMENT Sheets, 9 by 11 inches. Packed 25 sheets per

Grit bundle.
72 sheets of cloth abrasive. 4.5 by 5.5 inches. 12 00-187-6279 240
00-187-6281 150 Grit
each of: numbers 120, 100, 80, 60, 40, and 30.
00-187-6283 100 00-174-0995 400
00-187-6284 80 00-174-0997 320
00-271-5950
00-174-1000 220
2 inches wide by 150 feet long. 00-174-1001 180
CLOTH, ABRASIVE 00-865-5689 100
Grit
ALUMINUM OXIDE glue bond abrasive cloth, 00-187-6289 320 Sheets, 9 by 3-21/32. Packed 100 sheets per
titanium toughened closed coating. Generally 00-187-6290 240 bundle.
intended for use in abrading metal of high tensile 00-274-6209 220
strength. 00-187-6291 180 Grit
00-187-6292 150 00-174-0986 400
9 by 11 inches. 00-187-6293 120
00-187-6294 100
00-187-6295 80 GRAIN, ABRASIVE
Drill cloth backing
Grit 3 inches wide by 150 feet long. SOFT ABRASIVE GRAINS. For use as an
abrasive blasting material to clean carbon
00-253-4393 60
Grit deposits from the air passages and turbine
00-246-0334* 36
00-229-3092 320 blades of operating turbojet engines.
* 25 sheets
00-229-3080 240
00-229-3095 180 Aluminum Oxide
Jean cloth backing
00-229-3094 150
Grit
Grit 00-229-3097 120
00-230-3251 120
00-597-5798 320
CROCUS CLOTH. (Ferric Oxide and Quartz 00-619-8973 100 lb bag 36
00-246-0330 320
00-161-9715 240 type). Not waterproof. Used to produce a high
00-192-9316* 220 Black Walnut Shell
polish on metal surfaces.
00-192-5051 180 Grit
00-192-5050 150 Jean cloth backing sheets, closed coating.
00-192-5049 120 00-050-1094 50 lb bag
00-161-9066 100 9 by 11 inches.
00-192-5047 80 SPHERICAL GLASS BEADS to be used dry in
00-246-0333 50 pressure/suction type blasting equipment.
00-221-0872 50 sheet pkg
00-246-0331* 40 Cleans, peens, finishes and polishes ferrous and
* 50 sheets nonferrous materials. 95 percent round. 50
2 inches wide by 150 feet long. pound bag.
Drill cloth backing 00-268-3116 Size
00-576-9634 13
1 inch wide by 150 feet long. EMERY CLOTH. Jean cloth backing sheets, 00-110-2981 10
Grit closed coating, Not recommended for use with 00-012-1869 8
wood. General purpose abrasive for cleaning 00-950-9766 6
00-187-6275 50
and polishing. 00-935-7698 3
Jean cloth backing rolls 00-638-2756* Extra Coarse
00-584-4660 Coarse
LAPPING AND GRINDING
1 inch wide by 150 feet long. 00-584-4654 Fine COMPOUND
00-584-4653 Medium
Grit SILICON CARBIDE AND/OR ALUMINUM
* 25 sheets per bundle
00-187-6268 240 OXIDE. Grease mixed. Grit numbers 600, 500,
00-187-6269 180 SILICON CARBIDE, open mesh cloth with 400 and 320 intended for finish lapping,
00-187-6270 150 polishing and fitting of parts. Grit numbers 220,
Rayon backing. Closed coating both sides with
00-187-6271 120 150 and 120 intended for valve grinding. 1 pound
waterproof resin and lattices and abrasive grain.
00-187-6272 100 can.
Used for abrading and smoothing wood, metal,
cork, fiberglass, prime paint coats and most any
1-1/2 inches wide by 150 feet long. Extra Fine
other application where loading and filling
Grit presents a problem. Grit
00-187-6278 320 00-193-1356 600
2-151
CLASS 5350
use. Gives high polish to Gold and other precious
Grit Grade Grit metals. 2-1/2 inches long.
00-193-1349 500 00-193-7211 8/0 280
00-193-1348 400 00-186-8818 7/0 240 00-552-8000 2 oz
00-193-1341 220 00-186-8819 6/0 220
00-193-1340 150 00-271-7930 5/0 180
00-193-7227 120 00-221-0881 4/0 150 SAND, SANDBLAST
00-221-0882 3/0 120
00-186-8820 2/0 100 Siliceous grain sand containing a minimum of
00-221-0883 1/0 80 95% Silicon Dioxide. Intended for use in the blast
ARTIFICIAL SILICON CARBIDE AND/OR
00-221-0886 1G 50 cleaning of castings and metal surfaces in the
ALUMINUM OXIDE. Lapping and grinding
compound. For Chromium-Cobalt hard faced 00-221-0864 36 shop.
valve seats and disks used in steam systems. Oil 00-276-6126 100 lb bag
or greased-mixed. Packed 1 pound can. Closed Coating Sheets. 9 by 11 inches. Less
Flexible. Used chiefly for hand and machine 00-223-4365 100 lb bag
Fine Grit sanding on wood or other surfaces where

greater pressures are used for stock removal. STEEL GRIT
Grit
Grade Grit
00-576-1687 240 Angular particles produced by crushing
00-186-8821 4/0 150
heat-treated Steel shot. Suitable for most
00-161-9043 3/0 120
Coarse Grit stationary blast cleaning purposes. 100 pound
00-161-9044 2/0 100
00-221-0884 1/0 80 carton.
Grit
00-221-0885 1/2 60
00-576-1689 100 Cast Steel
SILICON-CARBIDE ABRASIVE SHEETS, Size
MAT, ABRASIVE coated on one surface. Waterproof paper 00-271-5986* 25
backing. Used for sanding or finishing wood, 00-271-5988 50
Nylon fiber, nonwoven, nonmetallic mats bonded metal, Plastic, paint, enamel, lacquer and other * 50 pound box
together with waterproof Aluminum Oxide similar material. Water, oils, or special waxes
abrasives. For use by hand or with an oscillating may be used as a lubricant, 9 by 11 inches.
sander for cleaning, scouring, development or Closed coating, 50 sheets per package. WOOL, METALLIC
new surface finishes, and preparing surfaces for
painting or enameling. 9 by 11 by 1/4 inches CARBON STEEL fibers having uniform sharp
48 pound backing
thick. cutting edges. Used as an abrasive for cleaning
Grade Grit and polishing.
Size
00-224-7215 600
00-967-5089 280 to 600
00-224-7216 500 Class 00. Used for rubbing down final coat for
00-967-5093 180 to 140
00-224-7201 10/0 400 cabinet work and smoothing automobile bodies
00-967-5092 Medium
00-224-7202 360 for paint spraying.
00-224-7203 9/0 320
PAPER, ABRASIVE 00-224-7205 8/0 280 00-240-2920 FINE 1 lb roll
00-224-7207 240 00-242-4403 1 lb roll
ALUMINUM OXIDE 00-224-7209 220
Polishing and cleaning metal, finishing and
Paper, rope or wood fiber backing. Paper 80 pound backing receiving old painted surfaces and removing
backing weight 90 pounds per ream. Metal discoloration stain.
working 9 by 3.667 inches. Grade Grit
00-721-8117 180 00-242-4405 1 lb roll
Grit 00-721-8116 150
00-543-3600 80 00-721-8115 120 Preparation of surfaces for first coats, polishing
00-619-9166 2/0 100 sheet metals and machinery parts, and
EMERY 00-619-9167 80 smoothing woodwork.
00-619-9168 60
Used for metal working. 9 by 13-3/4 inches. 00-242-4404 1 lb roll
00-186-8854 4/0 Extra Fine PUMICE, TECHNICAL

Floor maintenance, cleaning linoleum,
00-186-8855 3/0 Extra Fine scrubbing floors, cleaning machinery and tools,
00-186-8856 2/0 Extra Fine Intended for polishing metal, Plastic hard
Rubber parts, finishing glass, mirrors and removing rust, preparing surfaces before
furniture. Powder form, in 5 pound can. painting or varnishing first coats and finished
GARNET coats.
00-195-2565 Grade FFF
Rope or wood fiber paper backing. 100 sheets 00-242-4406 1 lb roll
per package.
ROUGE, ABRASIVE
Open Coating Sheets, 9 by 11 inches. Used
chiefly for sanding by hand on finishing WHITE ROUGE, STICK FORM. Natural or
materials. Synthetic Iron Oxides. For dental and general
2-152
Phone (215) 737-2336
DSN 444-2336
CLASS 5355
KNOBS AND POINTERS
DIAL, CONTROL DIAL-KNOB LOCK, ELECTRONIC

Dia
COMPONENT
DRUM SHAPE. Plastic knob, 1.750 inch outside 00-667-9155 1.000
diameter by .620 drum height. Press fit. Key style Plastic, with friction adjustment locking.
shaft accommodates .301. inch inside diameter BAR WITH SINGLE POINTER SHAPE.
Attached with threaded holes. Item
nominal, by .550 inches deep. Nonlinear single accommodated maximum 1 inch diameter by 3/8 Setscrew mounting.
scale marked 2 to 0 to 1 clockwise. 12 division inch thick.
quantity.
00-503-4264
Plastic with Aluminum Alloy insert.
KNOB
Aluminum Alloy material, painted Black. With
00-727-0557
BAR SHAPE, straight pin type mounting (without smooth gripping surface. Has White line
pin). Pin hole diameter .203 inch. Copper 1.500 reference marking .251 inch inside diameter,
ROUND WITH KNOB SHAPE. Aluminum Alloy
inches long by .562 inches wide by .500 inches Counter bored shaft accommodated.
6061 knob, Plastic Acrylic dial, 1.250 inch
outside diameter, knob portion diameter .750 thick. Smooth surface, natural color, without skirt Lg W Thk
inches, .830 inches high. With 2 cross recess set or pointer. Fits round shaft of .270 inch diameter
.375 inches deep. 00-676-5008NP 1.313 .813 .782
screws, 8-32 UNC threads. Accommodated
round shaft .250 inch diameter nominal by .643 Black with matte finish, single line marking.
inches deep. without skirt. With grip aid and two cross-recess
setscrews. Accommodated shaft .250 inch
diameter by .445 inch deep. Nondetachable
pointer. Setscrews 4-40 UNC threads.
Lg W Thk
00-219-7314NP 00-842-3111 1.504 .716 .649
CRES, Cadmium Plated, .562 inches wide by With grip aid. Integrally molded skirt 1.520 inch
SPECIAL FEATURES; Marked EMERGENCY, 1.624 inches by .562 inches thick. Smooth diameter. Black with White arrow 1.520 inches
NORMAL LOW, STANDBY, OFF, additional gripping surface. Accommodated square shaft long. RD shaft accommodated. .252 inch
screw hole diameter .486 inches. .250 inches wide by .343 inches deep. diameter by .590 inches deep. Setscrew with
8-32 UNC.
00-925-8249 00-928-9325NP
Lg W Thk
ROUND WITH KNOB. PLASTIC. 1.015 inch BALL SHAPE, setscrew mounting. 00-751-7597 1.515 .700 .800
outside diameter by .890 inch height. With 2
Hexagon socket setscrews. Counter bored shaft With grip aid. Integrally flared skirt 1.520 inch
diameter, nondetachable. Accommodated .250
.250 inch diameter by .812 inch deep. Linear
inch diameter shaft flatted (1) side, and secured
scale 90 to 10 CW direction with 10 divisions.
with 2 hexagon socket setscrews with 8-32 UNC
threads. Opaque lusterless Black with White
00-351-4581 arrow and line.
ROUND WITH KNOB. Linear scale range 400 to Plastic material without skirt, without pointer, Lg W Thk
200 CW direction, with 21 divisions. smooth surface round shaft accommodated. 00-839-9448 1.720 .710 .815
00-838-1766 Gray. Thread size 10-32 UNF, 1.000 outside Accommodated RD shaft .253 inch inside
diameter. diameter by .500 inches deep. Secured by 2
SETSCREW MOUNTING. 2 hexagon socket hexagon socket setscrews with 6-32 UNC
screws. Accommodated RD shaft .250 inch 00-838-2830 threads. Nondetachable ring skirt .609 inch
inside diameter. Linear scale 11 to 1 CW diameter. Nondetachable pointer 1.469 inches
direction, with 12 divisions. Plastic with smooth gripping surface. overall length. Black lusterless knob with White
Accommodation Rectangular shaft, .627 inches reference line.
00-721-8879NP inside length by .127 inches inside width. Lg W Thk
Secured with cross recess machine screw,
10-32 UNF threads. Black Knob. 00-160-5910 1.469 .750 .656
2-153
CLASS 5355
Accommodated RD counterbore shaft with .253 4-40 UNC thread. Accommodated RD Accommodated .1910 inch diameter shaft.
inch inside diameter and .470 inch counterbore counterbore shaft with .128 inch inside diameter Attached with (2) 5-40 UNC setscrews. Shaft
by .266 inches deep. With .590 inch overall 8.620 inches overall depth and .310 inch counterbore. Pointer .796 inches long overall.
deepness. Secured with 2 hexagon socket counterbore diameter by .100 inches deep. Gray Gray knob with reference line.
setscrews 8-32 UNC threads. Nondetachable lusterless color.
Lg W
flared skirt with 1.520 inches outside diameter.
Nondetachable pointer with 1.870 inches overall Lg W 00-508-2208 .706 .790
length. Black lusterless knob with line reference 01-119-5955 .660 .750
Plastic with Copper or Aluminum insert, without
mark.
FLUTED FOILS skirt. Matte finish with grip aid. RD shaft
Lg W Thk accommodated .127 inch diameter by .405
00-985-6888 1.870 .710 .815 inches deep. Requires 2 No. 4-40 UNC
setscrews.
Accommodated RD shaft with .251 inch Lg W Thk
diameter, 8 .656 inch overall depth. 00-990-3173 .750 .510 .510
Nondetachable skirt with 1.125 inch outside
diameter. Nondetachable pointer with 1.812 inch Plastic with Aluminum insert, without skirt. With
overall length. Black color with White single line 6 FLUTES. Aluminum Alloy material with a hole grip aid and shaft .253 inch inside diameter and
reference marking. attachment method. Grip aid included. .640 inch diameter by .114 inch deep
counterbore, overall .520 inches deep.
Lg W Thk Lg W Nondetachable pointer. Opaque Black lusterless
00-667-9183 1.812 .530 .843 01-297-3878 3.187 3.000 finish. Requires 2 No. 8-32 UNC threaded
hexagon socket set screws.
Plastic Black knob with White reference line. 6 FLUTES. Cast Iron overall. Glossy Yellow
Round shaft: .250 inch inside diameter, overall enamel color. Smooth gripping surface attached Lg W Thk
depth .500. Non detachable skirt, non with .312 inch diameter pin. Accommodating 00-582-3804 1.350 .910 .790
detachable pointer 1.250 inches long. 2- 8-32 .750 inch diameter by .812 inch deep shank .719
UNC set screw holes. Slot screw drive. inches long by 1.250 inches in diameter. Plastic with Copper insert, with detachable skirt
.900 inch diameter. Black with smooth surface.
Lg W Thk Lg W Reference mark slot in skirt, without pointer. RD
00-341-2477 1.250 .750 .625 00-073-2629NP 2.750 1.219 shaft accommodated .127 inch diameter by .560
inches deep. Requires (2) No. 4-40 UNC
BAR WITH DOUBLE POINTER SHAPE 8 FLUTES. Plastic with Copper insert, with flared setscrews.
nondetachable skirt 1.500 inch outside diameter.
Grip aid surface. Accommodating .251-.255 inch Lg W Thk
Aluminum, with smooth gripping surface, without
skirt or pointer. Natural color shaft diameter by .562 inch deep shaft. Attached with 00-013-8646 .750 .505 .655
accommodation. 2 hexagon socket 8-32 UNC setscrews. Black
overall with reference line marking. STEPPED SKIRT
.221 inch diameter by .375 inches deep. Set Lg W
screw size 4-40 UNC. Plastic with Aluminum Alloy insert. Grip aid.
00-584-5884 1.438 .875 Black color with matte surface luster.
Lg W Thk Accommodated RD counterbore shaft .252 inch
00-219-7321NP 1.500 .562 .500 12 FLUTES. Material unknown with grip aid. diameter. Nondetachable pointer.
Shaft accommodated counterbore .190 inch
inside diameter, counterbore .270 inch diameter Lg W Thk
Plastic with Copper insert and grip aid. With out
skirt. Black matte with indicator line. With 2 by .062 inches deep. .375 inches overall depth 00-556-0145 1.045 .715 .782
hexagon socket 4-40 UNC setscrews, attached with 2 setscrews. 00-559-8943 1.355 .910 1.110
accommodated a counterbore shaft .250 inch Lg W
inside diameter, .380 counterbore diameter by Plastic with Aluminum Alloy insert. Grip aid.
.160 inches deep .620 overall depth. 00-528-5129 .500 .440 Black color with matte surface luster.
Accommodated RD counterbore shaft .300 inch
Lg W 12 FLUTES. Plastic with Copper insert with grip diameter.
01-010-2224 .750 .750 aid. Accommodated shaft, flatted (1) side. .253
inch diameter by .562 inches deep. Straight Lg W Thk
Plastic with Copper insert. Without skirt or shank, .938 inch length by .094 inch diameter. 00-917-7957 .755 .510 .655
pointer. Gray with White line, RD shaft Attached with (1) 8-32 UNC threaded hexagon 00-959-3161 .755 .510 .655
accommodated .126 inch diameter by .380 socket setscrew. Gray matte finish. 00-616-9604 1.050 .710 .610
inches deep. 1 setscrew 4-40 UNC, Grip aid Lg W
circle with bar marking. Plastic, with Aluminum Alloy insert, grip aid
00-836-9268 .844 1.000 surface. Gray lusterless color with Dot reference
Lg W marking. Accommodated RD, counterbore hole
00-237-8192 .500 .440 12 FLUTES. Plastic with Copper insert with grip shaft .485 inch minimum diameter by .026
aid. Accommodated RD, flatted shaft (1) side. inches deep. Shaft inside diameter: .253 by
CROWN SHAPE .253 inch inside diameter by .468 inch depth. overall depth .405.
Nondetachable flared skirt. Straight shank, .094
inch long by .562 inch diameter. Attached with Lg W Thk
setscrew 8-32 UNC thread. Black matte luster, 00-020-3511 1.045 .710 .610
with single line reference marking.
Plastic with Aluminum insert and grip aid.
Lg W Accommodated RD, flatted (1) side .253 inch
00-883-4609 .625 .719 inside diameter by .568 inches deep.
PLASTIC with Copper insert and smooth Nondetachable stepped skirt 1.000 inch in
surface. Without skirt or pointer. With 2 hexagon 18 FLUTES. Plastic with grip aid, and flared diameter. Nondetachable pointer 1.045 inch
socket setscrew. nondetachable skirt .706 inch outside. overall length. Requires (2) No. 4-40 UNC
2-154
CLASS 5355
threaded hexagon socket setscrews. Black and line reference marking. Accommodated RD
lusterless knob. SPECIAL FEATURES CB shaft OD Thk shaft .250 inch diameter by .562 inch depth.
.485 inch diameter by .188 inches deep. 00-771-4271NP .515 .750 Attached with (1) hexagon socket 8-32 UNC
threaded setscrew.
Lg W Thk Aluminum Alloy, anodized, with Black matte
00-881-0722 1.045 .710 .777 finish. Grip aid. Accommodated .251 inch inside OD Thk SD
diameter by .500 inch depth RD shaft. Requires 00-518-1850 1.000 .750 1.500
ROUND SHAPE setscrew.
SETSCREW MOUNTING. WITH
OD Thk NONDETACHABLE SKIRT, WITH
00-833-3608NP 1.500 .625 COUNTERBORE, WITH GRIP AID, WITHOUT
SHANK.
Plastic, with Copper insert. Black matte finish,
slotted on top. Grip aid. RD shaft accommodated Plastic, Gray matte with dot reference mark. CB
PRESS-FIT MOUNTING. Black Rubber, without .125 inches by .187 inches deep. Attached with .375 inch diameter by .146 inch depth. Overall
pointer or skirt. Shaft accommodation .096 inch (2) hexagon sockets No. 4-40 UNC threaded .279 inch diameter by .531 inch depth. Requires
diameter by .180 deep smooth gripping surface. setscrews. (1) hexagon socket No. 5-40 UNC threaded
setscrew.
OD Thk OD Thk
00-793-0003 .219 .236 00-067-3659 .750 .750 OD Thk SD
00-419-4045 .385 .531 .500
PUSH-ON MOUNTING Plastic, with Copper insert. Grip aid.
Accommodated .253 inch inside diameter by Plastic, with Aluminum Alloy insert. Gray matte
Plastic overall, with Gray matte finish. With .500 inch depth RD shaft. Requires (2) hexagon finish with arrow reference mark, illuminated. CB
smooth grip. Accommodation RD shaft .075 inch heads No. 8-32 UNC threaded setscrews. .300 inch diameter by .060 inch depth. Overall
diameter by .260 inches deep. .129 inch inside diameter by .560 inch depth.
OD Thk Requires (2) hexagon socket No. 4-40 UNC
OD Thk 00-140-8122 .620 .660 threaded setscrews.
00-438-9479 .227 .300
Plastic, with Gray matte finish. Grip aid. OD Thk SD
PIN MOUNTING Accommodated .253 inch inside diameter by 01-018-0749* .510 .640 .900
.531 inch depth RD shaft. Requires (2) hexagon * Smooth grip
Steel composition 1020 material having a sockets No. 4-40 UNC threaded setscrews.
Phosphate Manganese surface treatment with Plastic, with Aluminum Alloy insert. Black
matte luster. Accommodated RD shaft .250 inch OD Thk lusterless finish, with slot reference mark. CB
diameter by .375 inches deep. Attached with 01-027-6495 .718 .531 .300 inch diameter by .177 inch depth. Overall
straight pin, .063 inch pin hole diameter. Knob .129 inch inside diameter by .560 inch depth.
comes without pin. Has grip aid surface. SCREW MOUNTING WITH NONDETACHABLE Requires (2) hexagon socket No. 4-40 UNC
SKIRT threaded setscrews.
OD Thk
01-031-8197NP .375 .500 Ring Style Skirt (SD=Skirt Diameter) OD Thk SD
00-853-9693 .510 .655 .900
Aluminum Alloy material with smooth gripping Plastic, with Aluminum insert, and Gray matte
surface. Accommodated RD shaft .087 inch finish. Grip aid. Accommodated .127 inch inside Plastic, with Aluminum Alloy insert. Black
diameter by .204 inches deep. Attachment is diameter by .560 inch depth RD shaft. Requires lusterless finish, with arrow reference mark. CB
straight pin. Item does not have pin, pin hole (2) hexagon sockets No. 4-40 UNC threaded .300 inch diameter by .177 inch depth. Overall
diameter .079 inches. setscrews. .254 inch diameter by .560 inch depth. Requires
(2) hexagon socket No. 4-40 UNC threaded
OD Thk OD Thk SD setscrews.
00-005-1027NP .236 .236 00-082-8231 .630 .630 .380
OD Thk SD
SCREW-ON MOUNTING Plastic, with Copper insert. Lusterless Black 00-838-6978 .510 .655 .900
color with White reference line market.
Plastic with Black matte finish and Copper insert. Accommodated .131 inch inside diameter by Plastic, with Aluminum Alloy insert. Black
with grip aid. Accommodated RD shaft .138 inch .380 inch depth RD shaft. Requires (2) cross lusterless with White arrow reference mark. CB
diameter by .250 inch depth. With No. 6-32 UNC recess No. 4-40 UNC threaded setscrews. Grip .485 inch diameter by .188 inch depth. Overall
receptacle threads. aid. .254 inch diameter by .665 inch depth. Requires
(2) hexagon socket No. 4-40 UNC threaded
OD Thk OD Thk SD setscrews.
00-519-3120 .750 .625 00-432-4836 .500 .500 .750
OD Thk SD
Black, Anodized Aluminum Alloy. Straight shank Plastic material with grip aid surface. Gray color 00-762-1493 .710 .690 1.150
style. Diameter .500 by long .343. With grip aid, with detail reference marking. SPECIAL
without skirt or pointer. Round shaft FEATURES are knob face measurements 1.28 Plastic, with Aluminum Alloy insert. Black
accommodated .352 diameter by .562 deep. to 5.12 MHZ AND 5 TO 640 KHZ. Nondetachable lusterless finish with White arrow reference
6-40 UNC thread size. flared skirt. Nondetachable pointer .437 inches mark. CB .485 inch diameter by .188 inch depth.
long. Attached with (2) hexagon socket Overall .254 inch diameter by .568 inch depth
OD Thk setscrews. setscrews. Requires (2) hexagon socket No.
00-043-0302NP .750 .750 4-40 UNC threaded setscrews. Skirt diameter
OD Thk SD 1.150.
Aluminum Alloy, Chromate finish. Grip aid. 01-075-4629 .500 .593 1.562
OD Thk
Accommodated .128 inch inside diameter by
.625 inch depth RD shaft. Requires 2 hexagon Plastic material with Copper Alloy insert, grip aid 00-989-4269 .710 .782
sockets No. 2-56 UNC threaded setscrews. surface. Black color knob with matte luster. Dot 00-680-1357 .710 .782
2-155
CLASS 5355
Plastic, with Aluminum Alloy insert. Black Nondetachable flared skirt. Gray color knob with Outside diameter .710, overall thickness .610.
lusterless finish with White arrow reference lusterless finish. Arrow reference marking.
mark. CB .640 inch diameter by .320 inch depth. Accommodated RD shaft. CB .485 inch diameter 00-543-0789 Black
Overall .254 inch diameter by .730 inch depth. by .188 inch depth. Overall diameter .128 inches 00-965-4891 Black W/Dot
Requires (2) hexagon socket No. 8-32 UNC by .568 inches deep. Attached with (2) hexagon
threaded setscrews. socket 4-40 UNC threaded setscrews. Plastic, with Aluminum insert. Black lusterless
finish CB .640 inch diameter by .114 inch depth.
OD Thk SD OD Thk SD Overall .254 inch diameter by .520 inch depth.
00-619-3835 .910 1.010 1.525 01-050-5043 .710 .782 1.150 With (2) hexagon socket No. 8-32 UNC threaded
00-579-6390 .910 1.010 1.525 setscrews. Outside diameter .910, overall
Plastic with Aluminum Alloy insert, grip aid thickness .790.
Plastic, with aluminum Alloy insert. Black surface. Nondetachable flared skirt. Black
lusterless finish with White arrow reference lusterless color with White lusterless arrow 00-619-4668
mark. CB .750 inch diameter by .250 inch depth. reference marking. Opaque material
Overall .254 inch diameter by .605 inch depth. transparency. Accommodated RD, flatted, (1) Plastic, with Aluminum Alloy insert. Black
Requires (2) hexagon socket No. 8-32 UNC side shaft with a counterbore shaft hole .485 lusterless finish, with Red lusterless tactile part
threaded setscrews. inches in diameter by .188 inches deep. Overall of knob. CB .640 inch diameter by .114 inch
OD Thk .128 inch diameter by .568 inch depth by .110 depth. Overall .254 inch diameter by .520 inch
inches wide. Attached with (2) hexagon socket depth with (2) hexagon socket No. 8-32 UNC
00-579-1210 1.260 .850 No. 4-40 UNC threaded setscrews. thread setscrews. SPECIAL FEATURE: Tactile
Plastic, with Aluminum Alloy insert. Black OD Thk SD form 4-GAIN.
lusterless finish. CB .300 inch diameter by .177 00-482-4498 .710 .782 1.150 OD Thk
inch depth. Overall .129 inch diameter by .560
inch depth. Requires (2) hexagon socket No. 00-667-9826 .910 1.156
Plastic with Aluminum Alloy insert, grip aid
4-40 UNC threaded setscrews. surface. Nondetachable flared skirt. Black
SETSCREW MOUNTING. WITH
OD Thk SD lusterless color with White lusterless arrow
COUNTERBORE AND GRIP AID. WITHOUT
reference marking. Opaque transparency
00-813-2078* .510 .655 .460 SKIRT OR SHANK.
material. Accommodated RD, flatted (1) side
00-762-1489 .510 .655 .460 shaft with a counterbore hole .485 inch diameter
* Without dot reference mark by .188 inch depth. Overall .253 inch diameter by Plastic, with Copper Alloy insert, grip aid surface.
With White dot reference mark .568 inch depth by .225 inches wide. Attached Black and Gray lusterless color with White
with (2) hexagon socket No. 4-40 UNC threaded illuminated reference index line. Accommodated
Plastic, with Aluminum Alloy insert. Black setscrews. RD, flatted (1) side counterbore shaft hole .380
lusterless finish. CB .485 inch diameter by .188 inch diameter by .030 inches deep. Overall .253
inch depth. Overall .129 inch diameter by .568 OD Thk SD inch diameter by .440 inches deep by .223
inch depth. Requires (2) hexagon socket No. 00-059-5438 .710 .782 1.150 inches wide. Attached with (2) hexagon socket
4-40 UNC threaded setscrews. No. 8-32 UNC threaded setscrews.
OD Thk SETSCREW MOUNTING. WITH OD Thk

COUNTERBORE, WITH GRIP AID, WITHOUT
00-685-4688 .710 .782 01-104-4957 1.000 .440
SKIRT, WITHOUT SHANK.
Plastic, with Aluminum Alloy insert. Black Plastic, with Aluminum Alloy insert, grip aid
Plastic, with Aluminum Alloy insert. Colors
lusterless finish. CB .485 inch diameter by .188 surface. Gray lusterless color. Accommodated
shown below. (lusterless finish). CB .435 inch
inch depth. Overall .254 inch diameter by .568 RD, counterbore hole shaft: .640 inch diameter
diameter by .026 inch depth. Overall .129 inch
inch depth. Requires (2) hexagon socket No. by .114 inches deep. Attached with (2) hexagon
diameter by .405 inch depth. Outside diameter
4-40 UNC threaded setscrews. socket No. 8-32 UNC threaded setscrews.
.510, Overall thickness .510.
OD Thk SD OD Thk
00-850-9799 Black
00-556-0151 .710 .782 .680 00-057-7794 Black W/White Dot 01-073-7408 .910 .655
00-945-4534 Gray W/Dot
With White Dot Reference Mark. Plastic, with Aluminum Alloy insert, grip aid
Plastic, with Aluminum Alloy insert. Gray, with surface. Black lusterless color, opaque material
OD Thk SD transparency. Accommodated RD, counterbore
line reference mark. CB .485 inch diameter by
00-994-3435 .710 .782 .680 .026 inch depth. Overall .269 inch diameter by hole shaft .750 inch diameter by .114 inches
.275 inch depth. With (2) hexagon socket No. deep. Overall .253 inch diameter by .520 inches
Plastic, with Aluminum Alloy insert. Black 4-40 UNC threaded setscrews. SPECIAL deep. Attached with (2) hexagon socket No. 8-32
lusterless finish. CB .640 inch diameter by .320 FEATURE: Top counterbore .600 inch diameter UNC threaded setscrews.
inch depth. Overall .254 inch diameter by .730 by .105 inch depth.
inch depth. Requires (2) hexagon socket No. OD Thk
8-32 UNC threaded setscrews. OD Thk SD 00-685-3799 1.760 .850
01-053-8958 .700 .380
OD Thk SD SETSCREW MOUNTING, WITH
00-616-7669 .910 1.010 .845 Plastic, with Aluminum Alloy insert. CB .485 inch NONDETACHABLE SKIRT, WITH SHANK,
diameter by .026 inch depth. Overall .129 inch WITH GRIP AID, WITHOUT COUNTERBORE.
Plastic, with Aluminum Alloy insert. Black diameter by .405 inch depth. With (2) hexagon (SD = Shank Diameter Inches).
lusterless finish. CB .750 inch diameter by .250 socket No. 4-40 UNC threaded setscrews.
inch depth. Overall .254 inch diameter by .605 Outside diameter .710, overall thickness .510. Plastic, with Aluminum Alloy insert. Black
inch depth. Requires (2) hexagon socket No. lusterless finish. With White tactile part of knob.
8-32 UNC threaded setscrews. 00-958-9986 Black W/Dot Accommodated .254 inch diameter by .730
inches long shaft. With straight shank .235
OD Thk SD Plastic, with Aluminum Alloy insert. CB .485 inch inches long by .845 inch diameter with (2)
00-687-2917 1.260 .850 1.185 diameter by .026 inch depth. Overall .254 inch hexagon socket No. 8-32 UNC threaded
diameter by .405 inch depth. With (2) hexagon setscrews. SPECIAL FEATURE: With Tactile
Plastic with Copper Alloy insert, grip aid surface. socket No. 4-40 UNC threaded setscrews. Form-Dimmer.
2-156
CLASS 5355
marking. Opaque transparency material. Black color . .250 inch RD counterbore shaft
OD Thk SD Accommodated flatted, (1) side shaft, .250 inch, accommodated.
00-667-5522 .910 1.375 .64 diameter by .640 inches deep by .223 inches
wide. Counterbore shaft hole .650 inch diameter OD Thk
SETSCREW MOUNTING, WITHOUT by .140 inches deep. Attached with (1) hexagon 00-584-4247 1.840 1.350
COUNTERBORE, WITHOUT SKIRT, WITH socket No. 6-32 UNC threaded setscrew.
SHANK. Plastic, with Aluminum Alloy inset. With grip aid
OD Thk and skirt. Black with Gray spinner. Counterbore
Copper Alloy material, Black with lacquer finish. 01-162-5765 1.250 .719 shaft accommodated .685 inch diameter by .320
Straight shank .002 inches long by .007 inches in inches deep overall .253 inch diameter by .740
diameter grip aid surface. Accommodated RD ROUND WITH BAR LEVER SHAPE. Setscrew inches deep without pointer. Requires (2) No.
shaft .002 inch diameter by .006 inches deep. type mounting. 8-32 UNC setscrews.
Attached with (2) cross recess No. 2-56 UNC
threaded setscrews. O/A
W Thk
OD Thk 00-275-2950 2.563 1.940
00-817-7593NP .011 .013
ROUND WITH DOUBLE FIN LEVER SHAPE
THREADED STUD MOUNTING
Plastic, with Copper insert. Grip aid. RD shaft
Enamelized CRES, Black color, without skirt or accommodated .250 inch diameter by .500
pointer, with grip aid. Reference marking CW inches deep. Without pointer or skirt. With (2)
Arrow lock, CCW Arrow release. Stud size hexagon socket No. 4-40 UNC threaded
thread 9/16 by 18UNF, 3/4 inches long. setscrews.
OD Thk W Lg Thk
00-921-3845NP 2.500 1.469 01-067-7086 .625 1.000 .625 Plastic, with Aluminum Alloy insert. Color
lusterless Black, with White line reference mark.
Opaque transparency material. Black color. Grip Plastic, with Aluminum Alloy insert. Black Grip aid. CB .485 inch diameter by .026 inches
aid surface. Accommodated concave shank. lusterless color with White single line reference deep. Overall .253 inch diameter by .405 inches
Attached with 3/8-16 UNC threaded stud. marking. deep with (2) hexagon socket No. 4-40 UNC
threaded setscrews. Without skirt.
OD Thk
Smooth gripping surface. Accommodated a
01-139-1268 1.750 .750 W Thk
flatted, (1) side shaft .253 inch diameter by .500
inches deep by .223 inches wide. A straight 00-324-6971 1.150 .610
UNTHREADED STUD shank .813 inch diameter by .094 inches long.
Attached with 1 cross recess type 1, 8-32 UNC Plastic, with Aluminum Alloy insert. Black
UNTHREADED COUNTERBORE HOLE, WITH threaded setscrew. lusterless finish, with White line reference mark.
SKIRT AND SHANK. Grip aid. CB .485 inch diameter by .188 inches
W Lg Thk deep. Overall .253 inch diameter by .568 inches
Steel, with Phosphate surface treatment and 00-995-6357 .875 1.062 .688 deep. With nondetachable flared skirt 1.150 inch
matte luster finish. Arrow reference marking. diameter with (2) hexagon socket No. 4-40 UNC
Nondetachable stepped skirt. Attached with ROUND WITH CONCAVE TOP SHAPE threaded setscrews.
unthreaded counterbore and stepped hole.
Nondetachable pointer .275 inches long. Setscrew type mounting. W Thk
Accommodated flatted (1) side shaft .164 inch 00-211-8469 1.150 .782
diameter by .749 inches deep by .139 inches
wide. Has grip aid surface. Shank dimension Plastic, with Aluminum Alloy insert. Black color,
.308 inch diameter. line reference marking. Grip aid. Counterbore
OD Thk Skirt/D .485 inch diameter by .026 inches deep. RD
shaft, flatted, (1) side .253 inch diameter by .405
00-731-2737NP .792 .749 .725
inches deep by .224 inches wide. Attached with
ROUND WITH BAR LEVER SHAPE (2) hexagon socket No. 4-40 UNC threaded
Plastic, with Aluminum Alloy insert. Gray matte setscrews.
finish. Grip aid. RD shaft accommodated .253
inch diameter by .405 inches deep. With (2) W Thk
hexagon socket No. 4-40 UNC threaded 01-056-3267 1.150 .610
setscrews.
OD Thk 16 FLUTES. Plastic, with Copper insert. Black
lusterless finish, with line reference mark. Grip
00-044-4190 .730 .956
aid. RD shaft accommodated .128 inch diameter
Plastic, with Copper insert. Black, with White
by .620 inches deep. CB .380 inch diameter by
reference mark. Smooth grip, without pointer, ROUND WITH CRANK SHAPE. Setscrew
with skirt .625 inch diameter RD shaft mounting. .150 inches deep. With (2) hexagon socket No.
accommodated .252 inch diameter by .422 4-40 UNC threaded setscrews.
inches deep. Requires (2) No. 4-40 UNC OD Thk
setscrew.
00-562-3113 .750 .750
OD Thk
00-644-1485 .687 .852 ROUND WITH SINGLE POINTED BAR FACE
SHAPE. Setscrew type mounting (unless noted
Plastic Polycarbonate material with Copper Alloy otherwise).
insert. Grip aid surface condition. Black Plastic material with Aluminum Alloy insert, grip
lusterless color with White arrow reference aid and integrally molded skirt. Without pointer.
2-157
CLASS 5355
ROUND WITH SINGLE POINTED BAR FACE
SHAPE
Plastic, with Copper insert. Gray lusterless finish

with White arrow reference mark. Smooth grip.
Accommodated RD shaft, flatted (1) side .253
inch diameter by .594 inches deep.
Nondetachable ring type skirt .719 inch W OD Thk
Aluminum Alloy, anodized, with painted groove. diameter. Nondetachable pointer 1.500 inches 00-240-1186 .630 .560 .620
Smooth grip. RD shaft accommodated .193 inch long. Attached with (1) hexagon socket No. 8-32
diameter by .356 inches deep. With UNC threaded setscrew. RD Plastic with clear color having a .037 inch
nondetachable pointer 1.060 inches long. long by 45 degree angle machine tool beveled
Distance to pointer end .700 inches. OD Thk edge. Any acceptable attachment method.
00-538-7331 1.500 .844
OD Thk Dia Thk
00-889-3424NP* .720 .470 ROUND WITH SINGLE POINTER SHAPE. 01-122-6138 3.500 .090
* Press fit Setscrew type mounting. Width, outside
Plastic, with Copper insert. Black matte finish
diameter and length shown. POINTER, DIAL
with line reference mark. Smooth grip. RD flatted
(1) side shaft accommodated .253 inch diameter 1 HOLE MOUNTING
by .500 inches deep. Nondetachable Gray matte
finish, flared skirt 1.250 inch diameter. TEAR DROP SHAPE
Nondetachable pointer .875 inches long.
Distance to pointer end .625 inches wide (1)
hexagon socket No. 8-32 UNC threaded
Plastic, with Copper insert. Color unknown. Grip
setscrew.
aid. RD shaft accommodated .125 inch diameter
OD Thk by .500 inches long. With nondetachable pointer.
00-833-9185 .875 .687 With (2) hexagon socket No. 4-40 UNC threaded
setscrews. Plastic, with clear material transparency.
Plastic, with Copper insert. Natural color with
W OD Lg Hole
matte finish. Smooth grip. RD shaft,
accommodated .250 inch diameter by .500 01-061-7482 .620 .640 W Lg Dia
inches long. Nondetachable stepped type skirt 00-846-8978 1.500 4.750 .516
1.250 inch diameter. Non detachable pointer Plastic, with Copper insert. Black top, clear sides
1.280 inches long. Distance to end of pointer and pointer, matte finish. Smooth grip. WINDOW DIAL
.630 inches. With (1) slot type No. 8-32 UNC Nondetachable pointer. RD shaft
threaded setscrew. accommodated .253 inch diameter by .480 ROUND SHAPE.Transparent glass. Designed to
inches long. With (2) hexagon socket No. 4-40 be placed directly over a dial or scale to protect it
OD Thk UNC threaded setscrews. from foreign matter furnished without frame.
00-814-4342 1.250 .562
W OD Lg
Plastic, with Copper insert. Gray lusterless finish 00-113-6274 1.250 1.150 .670
with White arrow reference mark. Smooth grip.
RD flatted (1) side shaft accommodated .253 Plastic, with Copper insert. Gray color knob with
inch diameter by .531 inches deep. on line reference marking. Lusterless finish. Grip
detachable pointer 1.250 inches long. Distance aid. Nondetachable ring skirt. Attached with (2)
to pointer end .750 inches wide (1) hexagon cross recess type. 1 setscrew.
socket No. 8-32 UNC threaded setscrew. Dia Thk
00-667-9365NP 5.796 .094
W Thk
00-667-9366NP 8.312 .094
00-579-2896 1.266 .719
2-158
Phone (215) 737-2336
DSN 444-2336
CLASS 5360
COIL, FLAT, LEAF AND WIRE SPRINGS
SPRING, HELICAL, NICKEL-COPPER-ALUMINUM ALLOY 00-597-1197

COMPRESSION
.428 inch inside diameter, .973 inches long, .072 .091 inch inside diameter, .740 inches long, .026
CYLINDRICAL COMPRESSION SPRINGS. inches thick, B4 style ends, 8 left-hand coils, 15 inches thick, B1 style ends, 13 right-hand coils,
Open-coiled round stock wound in left-hand, pounds at .062 inch. compression. 5.7 pounds at .550 inch compression.
right-hand, AND left-hand OR RA (any
acceptable) helixes. Both ends identical, except 00-759-0562 00-501-3217
as noted.
1.526 inch inside diameter, 5.015 inches long, .124 inch inside diameter, .840 inches long, .028
.184 inches thick, B4 style ends, 12 left-hand inches thick, B1 style ends. 11 any acceptable
coils, 57 pounds at 3.07 inch compression. coils, Support load rating 3.4 to 4.8 pounds at
.672 inch compression.
00-759-0564
00-209-9691
PHOSPHOR BRONZE
.125 inch inside diameter, .281 inches long, .078
.589 inch inside diameter, 2.00 inches long, .036 inches thick, B2 style ends, 11 left-hand coils, 6
inches thick, B4 style ends. 11 any acceptable pounds at .406 inch compression.
coils, .6 pounds at 1 inch compression.
00-291-5129
00-470-1956
1.313 inch inside diameter, 3.813 inches long, inches thick. B4 style ends, 7.25 left-hand coils.
.220 inches thick, B4 style ends. 9.5 any
acceptable coils, 60 pounds at 3.00 inch 01-061-2939
BRASS
compression.
.250 inch inside diameter, .500 inches long, .018 inches thick, B2 style ends, 12 any acceptable
inches thick, B2 style ends, 10 right-hand coils, 00-551-7507
coils, 4 ounces at .312 inch compression.
.448 pounds at .395 inch compression.
STEEL
00-308-8909
00-527-2436
.065 inch inside diameter .593 inches long, .018
.390 inch inside diameter, 1.00 inches long. .032 inches thick, B4 style ends, 14.5 left-hand coils, inches thick, B2 style ends, 8 coils.
inches thick, B2 style ends, 6 right-hand coils, 1 2.5 pounds at .400 inch compression.
pound at .656 inch compression. 00-252-8446
00-501-3194
00-292-1123 .140 inch inside diameter, .294 inches long, .024
.068 inch inside diameter, 1.200 inches long. inches thick, B4 style ends, 7 any acceptable
COPPER ALLOY .032 inches thick, B1 style ends, 25 any coils, 24 ounces at .219 inch compression.
acceptable coils, 18 pounds at .900 inch
.750 inch inside diameter, 2.250 inches long. compression. 00-308-8897
.094 inches thick, B1 style ends, 10 right-hand
coils, 14 pounds at 1.625 inch compression. 00-608-5060 .143 inch inside diameter, .295 inches long, .020
inches thick, B2 style ends. 7.5 coils, 10 to 12
00-292-1129 .088 inch inside diameter, .560 inches long, .016 ounces at .218 inch compression.
inches thick, B4 style ends, 12 right-hand coils,
.181 inch inside diameter, .240 inches long, .040 1.837 pounds at .333 inch compression. 00-308-8913
inches thick, B4 style ends. 4 any acceptable
coils, 11 pounds at .172 inch compression. 00-899-9721 .150 inch inside diameter, 1.700 inches long,
.026 inches thick, B4 style ends, 40 coils, 1
00-314-7079 .088 inch inside diameter, .718 inches long, .031 pound at 1.36 inch compression.
inches thick, B1 style ends, 12 any acceptable
NICKEL COPPER ALLOY coils, 13 pounds at .470 inch compression. 00-501-3204
.156 inch inside diameter, .563 inches long, .035 00-501-3516 .167 inch inside diameter, .263 inches long, .018
inches thick, B4 style ends, 8 right-hand coils, inches thick, B4 style ends, 5 coils, .581 pounds
2.5 to 4.0 pounds at .454 inch compression. .091 inch inside diameter, .268 inches long, .032 at .141 inch compression.
inches thick, B4 style ends, 6.5 any acceptable
00-919-8177 coils, 5.25 pounds at .240 inch compression. 00-200-4445
2-159
CLASS 5360
.173 inch inside diameter, 1.010 inches long, 00-201-1684 2.6 pounds at 1.015 inch compression.
.035 inches thick, B4 style ends, 14 any
acceptable coils, 3.5 pounds at .810 inch .254 inch inside diameter, .830 inches long, .043 00-292-4139
compression. inches thick, B4 style ends, 9 coils.
.409 inch inside diameter, 1.125 inches long,
00-933-0753 00-818-0282 .092 inches thick, B4 style ends. 7 right-hand
coils, 30 pounds at 1 inch compression.
.175 inch inside diameter, .560 inches long, .033 .272 inch inside diameter, .490 inches long, .042
inches thick, B1 style ends. 6.5 coils, 8.1 to 11.3 inches thick B4 style ends. 6 any acceptable 00-597-1914
pounds at .256 inch compression. coils. Support load rating 3.5 pounds at .375 inch
compression. .418 inch inside diameter, 1.250 inches long,
00-209-8720 .042 inches thick, B1 style ends, 7.5 right-hand
00-572-0817 coils, 3 pounds at .767 inch compression.
.045 inches thick, B4 style ends, 21.5 left-hand .285 inch inside diameter, .575 inches long, .045 00-200-2355
coils, 22 pounds at 1.312 inch compression. inches thick, B4 style ends, 7.5 any acceptable
coils, 4.1 pounds at .438 inch compression. .428 inch inside diameter, 1.656 inches long,
00-501-3208 .067 inches thick, B4 style ends. 11 any
00-291-1144 acceptable coils, Support load rating 16.5
.178 inch inside diameter, 1.063 inches long, pounds at .938 inch compression.
.020 inches thick, B1 style ends, 23 coils, 765 .291 inch inside diameter, 1.140 inches long,
pounds at .50 inch compression. .140 inches thick, B4 style ends. 6.75 any 00-829-5543
acceptable coils, 152 to 170 pounds at 1.048
00-209-9533 inch compression. .437 inch inside diameter, 1.250 inches long, .89
inches thick, B4 style ends, 8 left-hand coils,
00-343-7835 43.75 pounds at .75 inch compression.
inches thick, B4 style ends, 5.25 right-hand coils,
.315 inch inside diameter, .600 inches long, .053 00-687-3454
40 pounds at .436 inch compression.
inches thick, B4 style ends, 6.5 coils, 11 pounds
at .406 inch compression. .445 inch inside diameter, .840 inches long, .035
00-986-7304 inches thick, B4 style ends, 5.5 any acceptable
00-366-3386 coils, .75 pounds at .660 inch compression.
.063 inches thick, B2 style ends, 22 right-hand .316 inch inside diameter, 1.00 inches long, .060 00-833-6516
coils, 6 pounds at 2.390 inch compression. inches thick, 12.75 coils, 14.36 pounds at .844
inch compression. .480 inch inside diameter, 2.125 inches long,
00-608-5061 .135 inches thick, B4 style ends, 11 coils, 65
00-200-9596 pounds at 1.84 inch compression.
inches thick, B1 style ends, 6.5 any acceptable .338 inch inside diameter, 6.55 inches long, .043 00-432-3846
coils, 6.5 pounds at .230 inch compression. inches thick, B3 style ends, 30 left-hand coils, 8
pounds at 3.72 inch compression. .510 inch inside diameter, .880 inches. long, .082
00-420-5980 inches thick, B4 style ends, any acceptable coils
00-501-3200 18 pounds at .594 inch compression.
inches thick, B4 style ends, 6 right-hand coils, 6 .342 inch inside diameter, 2.423 inches long, 00-291-4281
ounces at .406 inch compression. .063 inches thick B4 style ends. 20.5 any
acceptable coils, 13.8 pounds at 1.656 inch .517 inch inside diameter, 2.500 inches. long,
00-376-1137 compression. .054 inches thick, B4 style ends, 14 right-hand
coils, 40 pounds at 1.75 inch compression.
.200 inch inside diameter, 1.226 inches long, 00-527-2322
.050 inches thick, B4 style ends, 13 any 00-253-7245
acceptable coils, 1.5 pounds at .900 inch .375 inch inside diameter, .734 inches long, .055
compression. inches thick, B4 style ends, 3.7 right-hand coils, .532 inch inside diameter, 1.875 inches long,
15 pounds at .375 inch compression. .093 inches thick, B4 style ends, 9 coils, 36.8
01-103-7575 pounds at 1.330 inch compression.
00-292-4407
.206 inch inside diameter, 1.00 inches long, .022 00-316-4242
inches thick, B4 style ends. any acceptable coils, .381 inch inside diameter, .442 inches long, .020
2 pounds at .459 inch compression. inches thick, B2 style ends, 5 coils, .3 pounds at .533 inch inside diameter, 2.090 inches long,
.20 inch compression. .135 inches thick, B4 style ends. 10.25
00-699-9925 right-hand coils.
00-316-3573
.222 inch inside diameter, 1.00 inches long, .045 00-236-3149
inches thick, B2 style ends. 8 right-hand coils, 11 .399 inch inside diameter, 2.00 inches long, .081
to 15 pounds at .562 inch compression. inches thick, B4 style ends. 10 right-hand coils, .550 inch inside diameter, 2.620 inches long,
22 pounds at 1.531 inch compression. .192 inches thick, B4 style ends, 10.5 right-hand
00-291-4278 coils, 12 pounds at 2.140 inch compression.
00-291-7587
.238 inch inside diameter, 1.378 inches long, 00-689-8264
.035 inches thick, B4 style ends, 19.5 right-hand .400 inch inside diameter, 1.125 inches long,
coils, 3 pounds at .809 inch compression. .055 inches thick, B4 style ends. 8 left-hand coils, .599 inch inside diameter, 2.00 inches long, .047
2-160
CLASS 5360
inches thick, B4 style ends, 11.5 coils, 3.85 01-183-4373 .283 inches thick, B4 style ends, 6.2 right-hand
pounds at .60 inch compression. coils.
.840 inch inside diameter, 3.5 inches long, .115
00-366-3375 inches thick, B4 style ends. 13 any acceptable 01-045-9992
coils, Spring deflection rate 32 pounds/inch.
.590 inch inside diameter, 2.656 inches long, 1.216 inch inside diameter, 3.750 inches long,
.162 inches thick, B4 style ends, 11.5 right-hand 00-680-3381 .343 inches thick, B4 style ends, 8 right-hand
coils, 60 pounds at 2.44 inch compression. coils. Spring deflection rate 806 pounds/inch.
00-252-8444 .168 inches thick, Spring has 1.268 inch bore 00-664-3287
diameter to work over .900 inch outside
.593 inch inside diameter, 1.00 inches long, .062 diameter. Ground end. 7 right-hand coils. 1.268 inch inside diameter, 11.812 inches long,
inches thick, B4 style ends. 6 right-hand coils, 19 .125 inches thick, B4 style ends. 25.5 left-hand
to 21 pounds at .812 inch compression. 00-781-4861 coils, 40 pounds at 4.750 inch compression.
00-217-9600 .906 inch inside diameter 2.266 inches long, 00-291-5126

.225 inches thick, B4 style ends. 6.5 any
.594 inch inside diameter, .812 inches long, .175 acceptable coils, Spring deflection rate 495 1.375 inch inside diameter, 1.750 inches long,
inches thick, B4 style ends. 4 left-hand coils, pounds/inch. .187 inches thick, B4 style ends. 5 right-hand
Square stock. 320 pounds at .718 inch coils, 30 pounds at 2.125 inch compression.
compression. 00-627-5666
00-290-9102
00-292-1126 .910 inch inside diameter, 2.687 inches long,
.170 inches thick, B4 style ends. 9 any 1.890 inch inside diameter, 3.596 inches long,
acceptable coils, Spring deflection rate 130 .283 inches thick, B4 style ends, 5 coils, 215 to
.640 inch inside IL diameter, 1.812 inches long,
pounds/inch. 245 pounds at 2.281 inch compression.
.085 inches thick, B4 style ends, 7.5 right-hand
coils, 12.6 pounds at .734 inch compression.
00-854-9868 00-761-4134
00-200-4635 .938 inch inside diameter, .781 inches long, .121 2.375 to 2.437 inch inside diameter, 5.625 to
inches thick, B4 style ends, 3.5 coils. 5.875 inches long, .468 inches thick, B4 style
.652 inch inside diameter, 1.950 inches long, ends. 7 any acceptable coils, 1460 pounds
.148 inches thick, B4 style ends, 8.8 right-hand 01-147-6778 compressed Spring deflection rate 545
coils, 5 pounds at 1.397 inch compression. pounds/inch.
00-878-8214 .162 inches. thick, B4 style ends. 7 any 00-764-2865
acceptable coils, 140 pounds at 1.312 inch
.684 inch inside diameter, .875 inches long, .041 compression. 2.531 inch inside diameter, 1.500 inches long,
inches thick, B2 style ends, 5 coils, 1.5 pounds at .156 inch thick, B4 style ends, 4 left-hand coils,
.375 inch compression. 00-218-6374 12.2 pounds at .953 inch compression.
01-147-9889 1.020 inch inside diameter, 4.063 inches long, 01-091-1004

.190 inches thick, B4 style ends. Springs
.734 inch inside diameter, 5.00 inches long, .148 deflection rate 52 pounds/inch. STEEL, BLACK JAPANNED
inches. thick, B4 style ends, 21.5 coils, 125
pounds at 3.5 inch compression. 00-503-5894 1.500 inch inside diameter, .906 inches long,
.156 inches thick, B4 style ends. 4 left-hand coils,
00-664-2992 1.09 inch inside diameter, 2.375 inches long, Support load rating 35 pounds at .688 inch
.135 inches. thick, B4 style ends. 5.5 left-hand compression.
.744 inch inside IL diameter, 1.504 inches long, coils, Spring deflection rate 38 pounds/inch.
.14 2 inches thick, B4 style ends, 7 any 00-292-4140
acceptable coils, 80 pounds at 1.028 inch 00-291-1229
compression. STEEL, CADMIUM PLATED
1.100 inch inside diameter, 6.824 inches long,
00-792-9771 .207 inches thick, B4 style ends. 19 coils, 170 .122 inch inside diameter, .812 inches long, .029
pounds at 4.25 inch compression. inches thick, B4 style ends, any acceptable coils,
.777 inch inside diameter, 2.375 inches long, 9.5 pounds at .375 inch compression.
.177 inches thick, B4 style ends, 8.75 right-hand 00-366-3367
coils, 44 pounds at 2.187 inch compression. 01-132-8924
00-664-4216 .244 inches thick, B4 style ends, 6.5 coils. .156 inch inside diameter, 1.00 inches long, .032
inches thick, B4 style ends, any acceptable coils,
.792 inch inside diameter, 7.625 inches long, 00-408-3231 23 pounds at 1.00 inch compression.
.135 inches thick, B4 style ends. 28 left-hand
coils, 68 to 78 pounds at 4.344 inch 1.120-1.135 inch inside diameter, 1.780 inches 00-198-8198
compression. long, .156 inches thick, B4 style ends. 7.5
left-hand coils, 98.3-105.3 pounds at 1.322 .161 inch inside diameter, .690 inches long, .051
00-417-1683 inches. inches thick, B4 style ends. 8.5 right-hand coils,
Support load rating 27 pounds at .510 inch
.813 inch inside IL diameter, 3.240 inches long, 00-906-6279 compression.
.063 inches thick, B4 style ends, 11 coils, 9.1
pounds at .694 inch compression. 1.120 inch inside diameter, 2.620 inches long, 00-584-2359
2-161
CLASS 5360
.228 inch inside diameter, 0281 inches long, 00-343-8376 acceptable coils, 26.2 to 31.2 pounds at 1.228
.050 inches thick, B4 style ends. 2.5 any inch compression.
acceptable coils. 1.750 inch inside diameter, 8.000 inches long,
.281 inches thick, B1 style ends. 12 right-hand 00-788-1378
00-201-0272 coils. Support load rating 111 pounds/inch.
.562 inch inside IL diameter, 2.063 inches long,
.293 inch inside diameter, .641 inches long, .041 00-291-2503 .078 inches thick, B4 style ends. 11 coils, 30
inches thick, B4 style ends, 7 left-hand coils, 5.7 pounds at 1.063 inch compression.
pounds at .375 inch compression. 2.500 inch inside diameter, .703 inches long,
.500 inches thick, B4 style ends. 8.5 any 01-080-8978
00-200-4767 acceptable coils, Spring deflection rate 532
pounds/inch. .592 inch inside diameter, 1.188 inches long,
.311 inch inside diameter, 2.625 inches long, .060 inches thick, B4 style ends. 6.75 any
.032 inches thick, B4 style ends. 27 left-hand 00-505-3923 acceptable coils, Support load rating 6 pounds at
coils, Spring deflection rate 1.5 pounds/inch. .688 inch compression.
STEEL, CHROMATE FINISH
00-936-5989 01-080-8977
.791 to .805 inch inside diameter, 1.530 inches
.317 inch inside diameter, 1.102 inches long, long, .110 inches thick, B4 style ends. 8.5 2.313 inch inside diameter, 4.375 inches long,
.125 inches thick, B4 style ends. 7 any right-hand coils, 52.5 pounds at 1.072 inch .188 inches thick, B4 style ends. 10 any
acceptable coils, Support load rating 56.5 to compression. acceptable coils, 22 pounds at 2.875 inch
60.5 pounds at 1.030 inch compression. compression.
00-906-6261
00-297-6698 00-619-3664
STEEL, CORROSION-RESISTING
.369 to .398 inch inside diameter, 1.375 inches 2.750 inch inside diameter, 10.250 inches long,
long, . to .032 inches thick, B3 style ends. 10 any .156 inch inside diameter, .313 inches long, .014 .162 inches thick, B4 style ends. 11 any
acceptable coils, 1.9 pounds at .575 inch inches thick, B4 style ends. 9 any acceptable acceptable coils, 26 pounds at 4 inch
compression. active coils, .50 pounds at .3 inch compression.
compression.
01-057-9175 00-576-2823
00-619-0150
.442 inch inside diameter, 1.185 inches long, .199 inch inside diameter, .437 inches long, .025
.162 inches thick, B4 style ends. 6.5 any inches thick, B3 style ends any acceptable 4.188 inch inside diameter, 6.375 inches long,
acceptable coils, Support load rating 127.5 right-hand coils, 4.50 ounces at 26/64 inch .313 inches thick, B4 style ends. 9.75 any
pounds at 1.062 inch compression. compression. acceptable coils, 116 pounds at 3.312 inch
compression.
00-200-9642 00-308-9091
00-616-5432
.047 inches thick, B4 style ends, 13 coils, 2 inches thick, B4 style ends, 5.5 right-hand coils, STEEL, NICKEL PLATED
pounds at 1.187 inch compression. 63.5 pounds at .378 inch compression.
00-568-9620 00-446-6292 inches thick, B4 style ends. 3.750 left-hand coils,
Spring deflection rate 520 pounds/inch.
.283 inches thick, B1 style ends. 6-1/8 any inches. thick, B4 style ends. any acceptable 00-291-7114
acceptable coils. coils, 1.6 pounds at .806 inch compression.
00-446-3377 00-972-9894 inches thick, B4 style ends. 4.75 left-hand coils,
Spring deflection rate 70 pounds/inch.
.125 inches. thick, B4 style ends, 8.25 right-hand inches thick, B4 style ends. 7 right-hand coils, 00-291-1225
coils, 25 pounds at 1. .438 inch compression. support load rating 2.6 pounds at .625 inches
and 70 pounds at .5 inch compression. .640 inch inside diameter, 2.063 inches long,
00-291-7607 .207 inches thick, B4 style ends. 5.5 left-hand
00-209-7720 coils, spring deflection rate 858 pounds/inch.
.130 inches thick, B4 style ends. 8 left-hand coils, .399 inch inside diameter, .954 inches long, .035 00-291-1227
Spring deflection rate 38.7 pounds/inch. inches thick, B4 style ends. 8.80 any acceptable
00-291-1231 .100 inches thick, B4 style ends. 6.5 left-hand
00-894-4489 coils, Spring deflection rate 21.2 pounds/inch.
.312 inches thick, B4 style ends, 9.25 right-hand .400 inch inside IL diameter, 1.188 inches long, 00-291-1226
coils, 129 pounds at 3.75 inch compression. .080 inches thick, B4 style ends. 7 left-hand coils,
40 pounds at .043 inch compression. .884 inch inside diameter, 2.875 inches long,
00-291-7582 .1205 inches. thick, B4 style ends. 10.5
00-874-7171 right-hand coils, Spring deflection rate 33.4
1.631 inch inside diameter, 5.188 inches long, pounds/inch.
.307 inches thick, B4 style ends, 8 right-hand .465 inch inside diameter, 1.765 inches long,
coils. .090 inches thick, B4 style ends. 11 any 00-527-2199
2-162
CLASS 5360
.9375 inch inside diameter, 1.875 inches long, 00-690-5474 00-598-7147
.100 inches thick, B4 style ends. 6.5 right-hand
coils, spring deflection rate 23.2 pounds/inch. .276 inch inside diameter, 1.00 inches long, .042 STEEL, STAINLESS
inches thick, B4 style ends. 6-3/4 right-hand
00-291-7113 coils, 8.33 pounds at .534 inch compressed .1934 inch inside diameter, .813 inches long,
length. Spring deflection rate 17.9 pounds/inch. .0253 inches thick, B2 style ends. 11 any
1.188 to 1.250 inch inside diameter, 3.875 acceptable coils, 1.5 pounds at .500 inch
inches long, .307 inches thick, B1 style ends. 7 00-974-6632 compression.
right-hand coils, Spring deflection rate 540
pounds/inch. .284 inch inside diameter, 1.250 inches long, 00-265-3667
.038 inches thick, B4 style ends. 8 right-hand
00-664-3619 active coils, 7.631 pounds at .598 inch .199 inch inside diameter, .500 inches long, .020
compression. inches thick, B2 style ends, 7 coils, 15.4 ounces
STEEL, PASSIVATED, CORROSION at .25 inch compression.
RESISTANT 00-770-4949
00-265-3671
.050 inch inside diameter, .394 inches long, .020 .399 to .409 inch inside diameter, 1.175 inches
inches thick, B4 style ends, 13.5 left-hand coils, long, .033 inches thick, B4 style ends. 6.30 any
.192 inches thick, B4 style ends. 7 right-hand
4 pounds at .322 inch compression. acceptable coils, 3.26 pounds at .454 inch
compression.
00-794-0506
00-216-9015
00-817-6295
.076 inch inside diameter, .810 inches long, .022 TAPERED COMPRESSION SPRINGS
inches thick, B4 style ends, 20 right-hand coils, .405 inch inside diameter, 1.01 inches long, .102
3.73 pounds at .475 inch compression. inch thick, B4 style ends, 6 coils, 92.5 pounds at Open-coils lengthened round stock wound in
.785 inch compression. left-hand, right-hand, and left-hand or right-hand
00-943-8154 (any acceptable) helixes. Both ends identical
01-017-7014 except as noted.
inches thick, B4 style ends, 4.5 right-hand coils, .456 inch inside diameter, 2.250 inches long,
1.53 pounds at .155 inch compression.
.072 inches thick, B4 style ends, any acceptable
00-946-4683
01-110-8136
inches thick, B4 style ends, 10 coils, .025 pounds STEEL
at .178 inch compression. .515 inch inside diameter, .750 inches long, .052
inches thick, B4 style ends, 5 pounds at .330 .245 inch inside diameter, .762 inches long, .035
00-948-5034 inch compression. inches thick, B4 style ends, 7 coils, 2.3 pounds at
.435 inch compression.
.156 inch inside diameter, .880 inches long, .042 00-759-0563
inches thick, B4 style ends. 10 any acceptable 00-532-1898
.062 inches thick, B4 style ends. 14 coils, 3 .875 inch inside diameter, 2.438 inches long,
00-455-6922 pounds at 1.562 inch compression. .085 inches thick, B4 style ends. 16 any
acceptable coils, Spring deflection rate 2
.190 inch inside diameter, .515 inches long, .020 00-899-7050 pounds/inch.
inches thick, B1 style ends. 12 any acceptable
coils, Support load rating .305 pounds at .372 2.750 inch inside diameter, 5.750 inches long, 00-527-1405
inch compressed length. Spring deflection rate .250 inches thick, B4 style ends, 9 coils, 77.5
2.150 pounds/inch. pounds at 2.750 inch compression. 1.125 inch inside diameter, 2.221 inches long,
.135 inches thick, B4 style ends. 8 any
00-619-0285 00-827-4095 acceptable coils.
.210 inch inside diameter, 1.500 inches long, STEEL, PLASTIC COATED 00-314-7089
.045 inches. thick, B4 style ends, any acceptable
coils, 11.8 pounds at 2.00 inch compression. 1.122 inch inside diameter, 3.824 inches long, STEEL, CORROSION RESISTING
.201 inch thick, B4 style ends. 9 any acceptable
00-575-5423 coils, 164.5 pounds at 1.933 inch compression. .188 inch inside diameter, .406 inches long, .183
inches thick, B4 style ends. 5 left-hand
.217 to .257 inch inside diameter, 1.171 inches 00-598-7148 rectangular shaped coils, Support load rating.
long, .062 inches thick, B4 style ends. 11 any 1.322 pounds at 9/32 inch compression.
acceptable coils, 18 to 22 pounds at .937 inch 1.312 inch inside diameter, 5.172 inches long,
compression. .192 inches thick, B4 style ends. 11 any 00-307-8538
acceptable coils, 166 pounds at 2.570 inch
00-841-9014 compression. .580 inch inside diameter, .615 inches long, .045
inches thick, B2 style ends. 3 right-hand coils, 2
.250 inch inside diameter, 1.250 inches long, 00-962-2728 pounds at .340 inch compression.
.025 inches thick, B4 style ends. 15-1/2 any
acceptable coils, 1.210 pounds at .540 inch 1.476 inch inside diameter, 3.955 inches long, 00-584-2358
compressed length. Spring deflection rate 1.710 .250 inches thick, B4 style ends, 7.5 coils, 325
pounds/inch. pounds at 2.3 inch compression. STEEL, PLASTIC COATED
2-163
CLASS 5360
1.820 inch inside diameter, 7.550 inches long, .172 inch outside diameter, 8.854 inch inside long. Closed coils initial tension rating .800
.387 inches thick, B4 style ends. 10 any length. Hooks at 180 degree and centered. any pounds. Support load rating 2 pounds 5 ounces
acceptable coils, Support load rating 643 acceptable coils, 8.922 inches long. at 1.875 inch extended length.
pounds at 4.13 inch compression.
00-343-8378 00-801-3001
00-598-7151
STEEL STEEL, PASSIVATED
2.250 inch inside diameter, 7.875 inches long
.313 inches thick, B4 style ends. 12 any .094 inch outside diameter, .562 inch inside .350 inch outside diameter, 3.000 inch inside
acceptable coils, .381 pounds at 3.875 inch length, .009 inches thick, Hooks centered and length, .035 inches thick, Full loops both ends
compression.
parallel. 45 right-hand coils, .406 inches long. centered. 70 any acceptable coils, 2.450 inches
long. Closed coils length initial tension rating 2.9
00-598-7149
00-664-2149 pounds. Support load rating 3.5 pounds at 3.450
inches extended length. Spring deflection rate
.094 inch outside diameter, .601 inch inside 1.010 pounds/inch.
.437 inches thick, B4 style ends. 10 any
acceptable coils, 880 pounds at 4.87 inch length, .012 inches thick, Hooks centered and
compressed length. Spring deflection rate 142 parallel. 32 right-hand coils, .437 inches long. 00-894-1035
pounds/inch.
00-664-2145 .485 inch outside diameter, 2.250 inch inside
00-664-3629 length, .063 inches thick, D17 style ends, loops
.125 inch outside diameter, .563 inch inside centered and parallel, 35 coils, 6 pounds at 3.80
2.226 inch inside diameter, 5.780 inches long, length, .018 inches thick, Loops centered and inches extended.
.375 inches thick, B4 style ends, 8 coils, 950 parallel, 17 right-hand coils, .313 inches long.
pounds at 3.28 inch compression. 01-017-1436
00-664-2139
00-598-7150 .750 inch outside diameter, 1.500 inch inside
.234 inch outside diameter, 112.50 inch inside length, .097 inches thick, Hooks at 180 degrees
3.062 inch inside diameter, 14.69 inches long, length, .041 inches thick, Loops at 90 degree and centered. 10-1/2 any acceptable coils,
.437 inches thick, B4 style ends, 11 coils, 780 and centered, 294 coils, 5 pounds at 2.60 inches support load rating 35 pounds at 2.375 inches
pounds at 5.06 inch compression. extended. extended length. Spring deflection rate 40
pounds/inch.
00-803-5536 00-318-9298
00-972-8816
SPRING, HELICAL, EXTENSION STEEL, CADMIUM PLATED
STEEL, ZINC COATED
CYLINDRICAL EXTENSION SPRINGS. .250 inch outside diameter, 11.250 inch inside
Close-coils lengthened round stock wound in length, .037 inches thick, D17 style ends .750 inch outside diameter, 1.375 inch inside
left-hand, right-hand and left-hand or right-hand centered an parallel, any acceptable coils, 12.7 length, .625 inches thick, Loops centered and
(any acceptable) helixes. Dimensions, relative pounds per inch. parallel. 11 right-hand coils, .750 inches long.
position of hooks and other data noted below. IL Spring deflection rate 7.5 pounds/inch.
length-hook to hook free IL length. 01-144-9036
00-298-6134
STEEL, CORROSION-RESISTING
.250 inch outside diameter, 5.061 inch inside
0380 inch outside diameter, 1.065 inch inside length, .032 inches thick, Loops centered and
length, .031 inches thick, Hooks at 90 degrees parallel, 160 right-hand coils, 5.135 inches.
and centered any acceptable coils, .542 inches
NI-CH-IR ALLOY 00-515-0662
2-164
Phone (215) 737-2336
DSN 444-2336
CLASS 5365
BUSHINGS, RINGS, SHIMS, AND SPACERS
BUSHING BLANK
Body Dia O/A Lg Hole Dia Flange Dia
Copper Alloy. Overall length .312 inch. Body outside diameter 2.500 00-663-2125 .615 2.375 .562 .869
inches. Outside flange diameter 3.000 inches with a .125 inch flange width. 00-598-5416 .740 2.250 .625 1.084
Square corners. 00-141-6943 .927 2.125 .750 1.314
Non Spec Item

00-246-3092
Body Dia O/A Lg Hole Dia Flange Dia
BUSHING, MACHINE THREAD 00-903-7123 .375 .406 .125 .500
00-910-5288 .590 .500 .375 1.062
HEXAGON WRENCHING SURFACE 00-598-5323 .750 1.063 .375 1.250
00-598-6605 .750 1.125 .375 1.250
Brass 00-851-3066 1.125 1.062 .750 1.250
Round
5/8-27 UNS-3A
O/A Lg Thd Lg Hole Dia
00-293-7971 .531 .344 .391
1-1/4-12 UNF-3A
O/A Lg Thd Lg Hole Dia
00-618-8579 .813 .563 .750
Body Dia O/A Lg Hole Dia
KNURLED WRENCHING SURFACE 00-828-8526 .427 2.000 .312
00-598-5394 .531 2.000 .438
Steel 00-598-5287 .740 2.000 .541
00-927-2972 .927 2.000 .750
1-9/16-18 UNEF-2A 00-644-0392 1.240 2.000 .938
O/A Lg Thd Lg Hole Dia Non Spec Item

00-073-4109 1.000 .420 1.150
SLOTTED WRENCHING SURFACE 00-543-4470* .270 .938 .080
00-768-7737 .281 1.000 .083
Steel, Passivated 00-342-4330 .391 .150 .257
00-598-5389 .453 .531 .320
00-685-0030 .750 .656 .406
1/4-20 UNF-3A 01-023-9467 .812 .375 .562
O/A Lg Thd Lg Hole Dia 00-598-5365 1.000 .500 .672
00-010-8423 1.115 .375 .740
01-180-8853 .562 .225 .188 00-655-8141 2.625 1.260 1.938
* Split design
BUSHING, NONMETALLIC White
RUBBER, SYNTHETIC Round Beveled
Round Flanged

Body Dia O/A Lg Hole Dia Flange Dia 00-598-5322 .344 .688 .125
00-598-5282 .302 2.750 .220 .505
00-820-4535 .427 2.625 .312 .619 Round Tapered
00-141-6944 .552 2.500 .437 .744
2-165
CLASS 5365
Thd Size O/A Lg
00-805-6646 7/8-14 UNF-3A .781
Steel, Cadmium Plated, Flared Tube.
Body Dia Body Dia

Max Min O/A Lg Hole Dia
00-445-8617 2.500 2.375 .500 2.000
PLUG, MACHINE THREAD Thd Size O/A Lg

01-041-4367* 7/16-20 UNF-3A .719
Anodized Aluminum Alloy plug. With 45 degree seat angle and a .062 inch 00-289-0431 9/16-18 UNF-3A .812
diameter bleeder hole. * With lockwire holes.
Copper Alloy, Hexagon Head Extended Washer.
Lockwire holes.
Thd Size O/A Lg Thd Size O/A Lg
00-006-8202 3/8-24 UNF-3A .594 00-203-0292 7/8-16 UN-3A 1.450
00-287-0093 7/16-20 UNF-3A .625
00-124-3042 1/2-20 UNF-3A .656 Steel, Hexagon Head.
00-845-3502 9/16-18 UNF-3A .719
00-080-1846 3/4-16 UNF-3A .844
Without lockwire holes.

Thd Size O/A Lg
00-287-0094 7/16-20 UNF-3A .625
00-287-0092 1/2-20 UNF-3A .625
00-287-0101 3/4-16 UNF-3A .781 Thd Size O/A Lg
00-142-2684 5/8-18 UNF-3A 1.094
Aluminum Alloy, Round Head Square Drive.
With bleeder hole and 6 lockwire holes.
Thd Size O/A Lg
00-684-7471 7/16-20 UNF-3A .625
With bleeder hole.

Thd Size O/A Lg
01-020-5369* 9/16-18 UNF-3A .719 Thd Size O/A Lg
00-287-0103 9/16-18 UNF-3A .719
* Steel Passivated 00-289-1820 1-5/8-12 UN-2A .875
Without lockwire holes
Steel, Round Head Hexagon Drive.
Without bleeder hole.
Thd Size O/A Lg
00-289-3019 7/16-20 UNF-3A .640
00-289-3070* 3/4-16UNF-3A .730
* Anodized Aluminum Alloy
With bleeder hole.

Thd Size O/A Lg
Thd Size O/A Lg 00-609-6771 1/4-28 UNF-3A .375
00-805-1403 7/16-20 UNF-3A .656
01-146-0564* 7/16-20 UNF-3A .656 Steel, Passivated.
00-050-5661 1/2-20 UNF-3A .656
* Steel Passivated Thd Size O/A Lg
00-349-1908 10-32 UNF-3A .343
Steel CRES, Passivated. 00-607-8537 5/16-24 UNF-3A .375
With lockwire holes. Steel, Zinc and Chromate
2-166
CLASS 5365
Thd Size O/A Lg Thd Size O/A Lg
00-816-1145 5/16-24 UNF-2A .375 00-898-0146 1-1/4-18 UNEF-2A .641
00-816-1146 3/8-24 UNF-2A .375
00-816-1148 7/16-20 UNF-2A .453 Steel, CRES
00-816-1149 1/2-20 UNF-2A .453
00-816-1155 3/4-16-UNF-2A .344 Thd Size O/A Lg
00-816-1152 3/4-16 UNF-2A .484 00-843-1523* No. 10-32 UNF-3A .364
00-816-1156 7/8-14 UNF-2A .625 01-096-5143 3/4-10 UNC-2A .641
00-816-1158 1-3/16-12 UN-2A .750 * Silver Plated, with lockwire holes.
SPCC HX Quality Control Item
Steel, Round Slotted
Copper Alloy
Thd Size O/A Lg
00-336-5565 1/2-20 UNF-2A 1.688
Steel, Phosphate Treated

Thd Size O/A Lg
00-142-1775 3/8-16 UNC-3A .375
00-336-5557 1-1/8-12 UNF-2A .711
Copper Alloy, Hexagon Head
Thd Size O/A Lg

01-209-3590* 3/8-24 UNF-3A .610
* With 1 lockwire hole.
Thd Size O/A Lg PLUG, MACHINE THREAD, MAGNETIC

00-177-3754 1/2-14 UNS-1A .609
00-119-4750 3/4-16 UNF-2A .938 Aluminum Alloy, Anodized, Hexagon Head
Nickel, Chromium Plated

Thd Size O/A Lg
01-098-4490* 1/2-13 UNC-2A .469
* SPCC HX Quality Control Item
Thd Size O/A Lg
Nickel Alloy
00-835-2504 1/2-20 UNF-3A .670
Thd Size O/A Lg
00-994-1630* 9/16-18 UNF-2B .687 Steel, CRES. Hexagon Head Extended Washer
* With bleeder hole and lockwire hole.
Steel
Thd Size O/A Lg
01-046-1135 5/16-24 UNF-2A .531
00-908-6541 7/16-20 UNF-2A .670
01-026-5236 1/2-20 UNF-2A .670 Thd Size O/A Lg
01-018-9064 3/4-16 NPT-2A 1.015 00-857-6658 1-18 UNS-3A .830
Steel, Passivated RING, DEE

Thd Size O/A Lg
Brass, Black Chemical Surface Treatment
00-965-1158* 7/16-20 UNF-3A .660
00-611-0906* 9/16-24 UNEF-2A .666
* With 6 lockwire holes. Used with textile, webbing and leather items where the corrosion
properties of ferrous metals may affect these items.
Steel, Silver Plated Stock Dia Ins W Ins H
Thd Size O/A Lg 00-260-1415 .156 1.000 .844
00-913-1265* 1/2-20 UNF-3A .540
* With 1 lockwire hole. Steel Cadmium and Chromate Treated
Stock Dia Ins W Ins H
Aluminum, Round Slotted Head
00-990-3186 .188 1.090 .780
RING, EXTERNALLY THREADED

Slotted face drive with a straight bore shape. Accommodates 22 slots.
Right hand thread size listed, plus the dimensions shown are listed in
inches.
2-167
CLASS 5365
Aluminum, Anodized Black
Style
Bore Dia W Dp Thd Size ID OD Thk No. Type
00-364-9676 1.420 .047 .031 1-5/8-32 UNS-3A 00-733-9030 .730 .948 .109 1 I or E
00-364-9807 4.724 .062 .047 5-32UNS 00-282-7207 1.164 1.323 .080 3 I or E
00-281-5403 1.234 1.547 .087 2 E
Copper Alloy 00-200-2595 1.267 1.455 .094 3 E
00-579-6481 1.298 2.432 .067 1 I
Bore Dia W Dp Thd Size 00-590-1739 1.750 2.055 .090 1 E
01-047-6710 2.562 .188 .078 2-13/16-16 Special 00-282-7392 1.797 2.186 .093 2 E
3A 00-263-2710 1.938 2.250 .065 3 E
00-263-5981 2.250 2.500 .183 2 E
Steel, Black Oxide Threaded 00-200-5453 3.515 3.781 .188 3 E
00-200-2639 3.688 4.063 .125 3 E
Bore Dia W Dp Thd Size 00-355-2033 4.062 4.438 .125 2 E
01-147-4307 .656 .030 .040 7/8-18 UNS-2A 00-597-4351 5.500 5.750 .125 1 I
01-171-8936 5.000 .062 .046 5-3/16-32 UNS-3A 00-200-3548 5.750 6.125 .125 3 E
00-263-5938 8.943 9.568 .092 3 I
Steel, Passivated
Bore Dia W Dp Thd Size
00-866-8263 .049 .050 .030 10-32 UNF-3A Style
ID OD Thk No. Type
00-634-7045 .114 .154 .020 2 E
RING, RETAINING 00-882-1435 .172 .216 .022 1 I
00-115-6848 .192 .284 .031 2 E
00-838-0422 .270 .437 .020 2 E
00-598-1474 .429 .432 .039 2 E
00-680-2375 3.625 3.812 .094 1 I
00-597-8475 4.062 4.312 .250 1 I
Steel, CRES
Style
ID OD Thk No. Type
Inside and outside diameters and thickness are shown in inches. 00-550-8599 .172 .297 .030 2 I or E
Application type listed: E = external or I = internal. 00-159-3901 .173 .223 .025 2 E
00-543-3388 .429 .468 .042 1 E
STRAIGHT GAP 00-159-3904 .579 .735 .078 2 E
00-168-6593 .691 .815 .062 1 E
Steel, Passivated
Style
ID OD Thk No. Type
00-938-9841 .170 .220 .025 2 E
01-015-2600 .255 .384 .031 2 E
01-017-8571 .386 .582 .045 2 E
Beryllium Copper 01-020-6298 .453 .677 .053 2 E
Style 01-015-2601 .515 .775 .061 2 E
ID OD Thk No. Type 01-025-6082 .646 .968 .076 2 E
00-695-2558 .161 .185 .156 2 E 00-402-5852 .710 .828 .059 1 I
01-017-8573 .905 1.339 .107 2 E
Bronze
Steel, Stainless
Style
ID OD Thk No. Type Style
ID OD Thk No. Type
00-200-7244 .906 1.096 .095 1 I
00-434-7510 .202 .246 .022 1 E
Nickel Copper Alloy
Steel, Zinc Plated
Style
ID OD Thk No. Type Style
ID OD Thk No. Type
01-113-1146 1.664 1.790 .063 1 I
00-180-4896 .194 .321 .031 2 E
00-982-2559 .260 .390 .031 2 E
Steel
Style HOOKED WIRE
ID OD Thk No. Type
00-775-5071 .250 .508 .093 9 I
00-598-6610 .285 .359 .037 1 E
00-523-8813 .312 .437 .093 5 I
01-017-8570 .321 .486 .039 2 E
00-331-2365 .412 .482 .035 1 E
00-598-1112 .579 .735 .078 2 E
2-168
CLASS 5365
Steel
OD Thk Style Thk
Style 00-804-9743 .550 .035 2
ID OD Thk No. Type 00-687-3379 .697 .037 2
00-266-1963 .905 1.031 .063 1 I 00-807-7968 .763 .035 2
00-282-5031 1.099 1.219 .060 1 I 00-754-1082 .831 .035 2
00-597-8513 1.688 1.875 .047 4 I 00-804-4997 .859 .042 2
00-804-9739 .974 .042 2
Steel, Passivated 00-833-7454 1.041 .042 2
00-807-2636 1.114 .042 2
Style 00-721-4828 1.136 .042 2
ID OD Thk No. Type 00-811-4073* 1.180 .050 2
00-988-7982 .470 .578 .054 1 I 00-801-2500 1.252 .050 2
00-530-6777 1.283 .052 2
HOOKED 00-780-9640 1.323 .050 2
00-804-2786 1.390 .050 2
00-804-3892 1.459 .050 2
00-754-1083 1.529 .050 2
00-804-3891 1.663 .050 2
00-804-2769 1.744 .062 2
00-804-2782 1.809 .062 2
00-804-5827 1.947 .062 2
00-804-2781 2.017 .062 2
00-754-1896 2.059 .062 2
Steel 00-804-2784 2.164 .063 2
00-804-9738 2.285 .078 2
Style
ID OD Thk No. Type 00-804-2773 2.415 .078 2
00-805-1398 2.565 .078 2
00-530-4934 .792 .978 .093 1 I 00-804-2770 2.635 .078 2
00-292-4089 .815 .878 .063 1 E 00-804-2772 2.707 .078 2
00-804-2771 2.780 .078 2
SPIRAL FLAT 00-804-2777 3.055 .093 2
00-822-2136 3.126 .093 2
00-811-4102* 4.157 .109 2
00-059-6363 4.558 .109 2
00-754-2190 4.691 .109 2
* Cadmium and Chromate Treated
Steel, CRES, Passivated

OD Thk Style Thk
00-804-6860 1.111 .042 2
Steel, Stainless 00-598-1774 1.250 .050 2
00-804-2276 1.283 .050 2
Style 01-026-3244 1.390 .050 2
ID OD Thk No. Type
00-806-0202 2.702 .078 2
00-110-8813 .280 .390 A/A 2 E 01-201-4778 3.415 .110 2
00-455-2588 3.488 .109 2
INTERNAL
Steel, Passivated
OD Thk Style Thk
00-597-8487 .349 .015 2
00-804-6855 .415 .025 2
00-807-5331 .623 .035 2
00-807-5333 .766 .035 2
00-804-2275 1.400 .050 2
00-530-7953 1.665 .050 2
01-214-3955 5.755 .095 2
Copper Alloy
Steel, Phosphate Treated
Style
ID OD Thk No. OD Thk Style Thk
01-130-1344 .563 .035 2 00-282-2431 .419 .025 2
Steel EXTERNAL
Style
ID OD Thk No.
00-890-6291 2.062 .064 2
Steel, Cadmium Treated

OD Thk Style Thk
00-804-9735 .415 .025 2
2-169
CLASS 5365
Beryllium Copper
ID Thk Style No.
ID Thk Style No. 00-804-7645 .460 .035 2
00-200-2637 .111 .010 2 00-753-3699 .577 .035 2
00-263-5877 .141 .010 2 00-597-4314 .619 .035 2
00-102-9621 .167 .015 2 00-808-7913 .691 .042 2
00-282-7109 .365 .025 3 00-598-1500 1.041 .050 2
Beryllium Copper, Cadmium Plated Steel, Phosphate Coated

ID Thk Style No. ID Thk Style No.
00-432-3584 .167 .015 2 00-174-9885 .691 .042 2
00-445-3244* .178 .015 2 01-071-9006 .904 .078 2
00-900-1803 .224 .025 2
00-282-7102 .459 .035 3 INTERNAL INVERTED LUGS
* Phosphate Treated
Steel
ID Thk Style No.
00-339-3348 1.000 .050 2
00-107-9068 1.085 .093 2

ID Thk Style No. Steel
00-880-2666 .181 .035 2 ID Thk Style No.
00-947-0159 .352 .020 2
00-418-2893 1.056 .078 2
Steel, Cadmium Plated 00-655-8113* 1.150 .050 2
* Cadmium and Chromate Treated.
ID Thk Style No.
00-720-8064 .224 .025 2
00-803-7313 .280 .025 2
00-715-1152 .337 .025 2
00-252-4721 .365 .025 2
00-803-7315 .395 .025 2
00-803-7301 .460 .035 2
00-803-7306 .519 .035 2
00-803-7305 .579 .035 2
00-282-1830 .619 .035 2 Steel, Passivated
00-810-8932 .633 .042 2
00-803-7303 .691 .042 2 ID Thk Style No.
00-804-7653 .720 .042 2 01-232-5265 .864 .042 2
00-804-2025 .808 .042 2
00-804-2026 .908 .042 2
00-530-7968 .923 .042 2
00-803-7319 1.039 .050 2
00-281-6623 1.154 .050 2
00-803-7316 1.270 .050 2
00-803-7299 1.385 .050 2
00-803-7304 1.443 .061 2
00-818-8087 1.500 .062 2
00-721-6476 1.615 .062 2 Copper Alloy
00-721-6877 1.634 .062 2
00-252-4758 1.756 .062 2 ID Thk Style No.
00-282-1831 1.928 .078 2 01-093-0987 .204 .025 2
00-200-7234 2.538 .093 2
00-809-0007 7.019 .187 2
Steel
Steel, CRES, Passivated ID Thk Style No.
ID Thk Style No. 00-263-3831 .207 .025 4
00-923-1326 .181 .035 2
Steel, Cadmium with Chromate
00-827-3262 .238 .035 2
00-598-1785 .925 .042 2 ID Thk Style No.
00-619-7229 .051 .010 2
Steel, Passivated 00-205-4731 .073 .015 2
ID Thk Style No. 00-816-4239 .094 .015 2
00-634-7465 .102 .025 2
00-298-6564 .224 .025 2 00-200-7377 .114 .025 2
00-263-5915 .279 .025 2 00-882-5959 .121 .025 2
00-282-7120 .337 .025 2 00-282-1633* .144 .025 2
00-263-5907 .427 .025 2 00-900-0982 .185 .025 2
2-170
CLASS 5365
ID Thk Style No. ID Thk Style No.
00-721-7680 .206 .025 2 01-287-9035 1.250 .050 2
00-682-1762 .243 .027 2 01-287-9030 1.412 .062 2
00-256-2465 .299 .037 2 00-473-1076 1.068 .052 2
00-442-5845* .391 .042 2 00-958-1073 1.809 .081 2
01-006-9567* 1.066 .062 2 00-003-0688 2.180 .078 2
* Cadmium Surface Treatment
INTERNALLY NOTCHED
Steel, CRES, Passivated
ID Thk Style No.
00-543-3981 .073 .015 2
00-598-1138 .094 .015 2
00-598-1840 .114 .025 2
00-817-1327 .125 .025 2
00-725-0969 .145 .025 2
00-205-6552 .206 .025 2
00-878-1908 .243 .025 2
Steel, Passivated
00-286-8718 .300 .035 2
OD Thk Style No.
Steel, Nickel Plated 00-824-3279 .375 .020 2
ID Thk Style No.
SPECIAL FLAT
00-370-0359 .300 .035 2
E BOWED
Steel
Style
Steel, Nickel Plated Finish ID OD Thk No. Type
00-357-2086 1.100 1.268 .050 7 I
ID Thk Style No.
00-205-6566 1.377 1.575 .043 7 I
00-712-6251 .532 .031 2 00-792-8362 1.445 1.669 .062 7 I
00-877-5324 1.859 2.135 .062 7 I
00-958-1075 3.894 4.518 .111 7 I

Style
ID OD Thk No. Type
00-252-7769 1.709 1.945 .048 7 I
00-205-6716 1.961 2.217 .048 7 I
Steel, Cadmium and Chromate Plated 00-582-3115 2.895 3.251 .063 7 I
00-943-8149* 5.066 5.566 .074 7 I
ID Thk Style No. * With Chromate
00-064-2652 .102 .015 2
00-634-7444 .161 .015 2 Steel, CRES
00-200-5234 .210 .025 2
00-584-6620 .328 .025 2 Style
ID OD Thk No. Type
SPECIAL 00-063-9099 .575 .672 .035 7 I
00-432-3152 1.524 1.740 .049 7 I
00-255-4386 1.908 2.190 .078 7 I
00-942-5371* 2.612 3.068 .049 7 I
* Passivated
SPIRAL FLAT
Steel
ID Thk Style No.
01-287-9031 .414 .033 2
00-246-6392 .569 .035 2
01-047-6712 .863 .050 2
Steel
2-171
CLASS 5365
SHIM
Style
ID OD Thk No. Type
LAMINATED METAL, RECTANGULAR CROSS SECTION
00-357-2086 1.090 1.267 .050 7
01-067-3768 1.416 1.622 .050 7 E
00-621-3192 1.421 1.623 .043 7 1136A A1 CIRCULAR STYLE
00-531-6487 1.503 1.719 .049 7
01-095-8228 1.779 2.035 .049 7 1144A
00-200-2550 1.971 2.227 .049 7 1148A

Style
ID OD Thk No. Type
00-281-3634 .930 1.080 .036 7 E
Steel, CRES Aluminum Alloy

Style Aperture
ID OD Thk No. Type Dia OD Thk
00-526-1833 3.724 4.140 .059 7 E 00-067-9743 .250 .875 .138
00-811-7105* .460 .690 .010
00-912-2913 .562 2.250 .014
01-237-2144 .765 1.312 .030
* Anodized Surface Treatment
Copper
Aperture
Dia OD Thk
Steel, Passivated 00-879-9934 .255 .423 .010
00-252-3888 .625 .796 .005
Style 00-194-0920 .625 .813 .016
OD Thk No. Type
00-599-4679 .688 1.188 .005
00-758-1034 .450 .040 2 E 00-599-4881 .937 1.140 .005
00-599-5912 1.160 1.350 .015
CLOVER 00-256-3439 1.375 1.562 .005
00-188-9654* 3.375 3.743 .015
00-599-4754 3.757 3.969 .011
* Lead Surface Treatment
Copper Alloy
Aperture
Dia OD Thk
00-842-0669 .536 .844 .033
Cobalt Alloy, Passivated 00-201-1984 .641 .781 .003
00-782-8511 .911 1.094 .032
Style 00-201-1982 1.140 1.500 .030
ID OD Thk No. Type 00-703-1693 1.344 1.750 .093
00-070-0385 .187 .350 .020 1 E 00-055-5055 1.500 2.125 .125
00-089-9303 .187 .360 .022 1 E 01-145-5766 1.781 2.250 .156
00-726-7939 4.250 4.781 .125
Steel
Nickel Alloy
Style
ID OD Thk No. Type Aperture
00-471-5606 .218 .406 .024 1 E Dia OD Thk
00-249-3270* .219 .406 .024 1 E 01-026-1270 .758 1.015
* Eligiloy Steel Alloy
Plastic Composition
OFFSET
Aperture
Dia OD Thk
00-493-9619 .319 .870 .012
00-493-9617 .421 .870 .010
Steel
Aperture
Dia OD Thk
00-412-7558 .156 .312 .007
Style 00-274-8837 .199 .392 .008
ID OD Thk No. Type 00-205-9924 .252 .551 .004
00-757-3234 .232 .132 .050 1 E 00-205-9926 .252 .551 .008
2-172
CLASS 5365
SPACER, PLATE
Aperture
Dia OD Thk
NON-CIRCULAR
00-416-8520 .260 .558 .002
00-901-0877 .265 .500 .048
00-597-7383 .266 .500 .007
00-763-0595 .399 1.188 .005
00-763-0596 .399 1.188 .010
00-763-0597 .399 1.188 .015
01-057-9288 .400 .750 .010
01-063-2033* .403 .530 .003
00-177-3940 .625 .746 .005
00-838-4774 .625 .875 .062
00-687-5659 .757 1.250 .062
00-051-1327 .765 .930 .002 Aluminum Alloy, Chromate Treated
00-827-4562 .765 1.562 .020 Bolt
00-165-7806 .800 1.200 .060 Hole Dia O/A Lg Holes Thk
00-597-5142 .875 1.250 .004 01-103-5142 .094 .520 2 .010
00-597-5141 .875 1.250 .016
00-597-7422 1.000 1.375 .002
Steel
00-597-7423 1.000 1.375 .005
00-597-7424 1.000 1.375 .010 Aperture Bolt
01-044-7084 1.005 1.250 .063 Dia O/A W Holes Thk
00-597-9219 2.000 2.434 .008 01-366-9976 1.125 2
00-597-7409 2.531 2.875 .007 00-792-9028 1.700 4.425 2 .208
00-597-7408 2.531 2.875 .016 00-662-9721 1.812 4.375 2 .030
00-458-0264 4.633 4.775 .003
* Passivated Surface Treatment
SPACER, RING
Steel, CRES
Aluminum Alloy
Aperture
Dia OD Thk ID OD Thk
01-379-5133 .752 1.000 .015 00-596-7647 .656 .790 .025
00-856-4682 .906 1.812 .062 00-873-5015 .750 1.499 .187
00-924-5850 1.015 1.875 .076 00-810-6752 .813 1.000 .064
00-038-0737* 1.078 1.375 .032
A21 CIRCULAR 00-585-8176 1.125 1.250 .025
00-980-3825 1.187 1.500 .062
00-276-2767 2.500 3.250 .091
01-108-0843 2.750 3.165
* Anodized Surface Treatment
Brass
ID OD Thk
01-105-7473 .910 1.620 .190
00-656-0397 2.156 2.563 .025
Copper Alloy 01-035-6624 2.312 2.625 .062
Aperture Bolt Bronze

Dia OD Holes Thk
00-597-5153 3.313 4.250 6 .005 ID OD Thk
00-200-5711 4.000 6.500 4 .005 00-398-9458 1.126 1.860 .438
00-597-5015 4.000 6.500 4 .010 01-193-3331 1.188 1.394 .050
00-933-0955 4.938 6.125 14 .094
Copper
NON-CIRCULAR
ID OD Thk
00-255-0296 .632 .750 .062
00-193-9791* .750 .968 .025
00-197-5309* .906 1.125 .062
00-197-5296* .938 1.188 .031
00-942-2571 .970 1.156 .062
00-430-7321 1.000 1.250 .031
00-205-8489 1.010 1.312 .025
00-835-2124 1.090 1.380 .032
00-199-5937* 1.125 1.250 .062
00-187-7489* 1.140 1.359 .031
Steel 00-199-5955* 1.140 1.437 .062
00-199-6001* 1.281 1.500 .062
Aperture Bolt 00-641-0017* 1.281 1.656 .047
Dia O/A W Holes Thk 00-641-1988 1.344 1.688 .025
00-662-9722 1.813 4.375 2 .007 00-199-6027* 1.375 1.625 .125
00-806-1806 1.375 1.718 .020
2-173
CLASS 5365
ID OD Thk ID OD Thk
00-187-1477* 1.390 1.593 .062 00-892-4189 2.062 2.625 .031
00-187-1506* 1.500 1.750 .067 01-057-2856 2.100 2.238 .032
00-247-1720 1.500 2.000 .031 01-130-7114 2.321 2.498 .033
00-599-5946* 1.641 1.938 .025 01-057-2857 2.438 2.625 .034
00-187-7508* 1.968 2.281 .062 00-753-1886 2.636 3.020 .063
00-193-9882* 2.031 2.312 .062 00-810-0599 3.996 4.362 .070
00-514-9171 2.812 3.500 .062 01-079-6678 4.980 5.875 .218
00-197-8426* 3.500 3.844 .031
00-599-4853* 3.875 4.125 .062 Steel
00-230-6949* 4.750 5.250 .062
00-656-7020 5.164 5.710 .149 ID OD Thk
00-641-9725 6.000 6.469 .125 00-248-1336 .765 1.000 .025
00-188-8343* 6.500 7.688 .032 00-262-4701 .812 1.075 .062
* Cold rolled, soft annealed 00-106-3151 .890 1.180 .060
Silver Plated 01-124-5218 1.000 1.440 .061
00-837-8352 1.188 1.595 .640
Copper Alloy 00-595-6093 1.281 1.574 .140
00-597-9221 2.000 2.434 .016
ID OD Thk 01-057-2996 2.252 2.750 .500
00-193-9812 .781 .937 .031 00-522-4315 3.346 4.340 .035
00-297-7803 .945 1.185 .050
01-076-3509 1.186 1.394 .050 Steel, Cadmium Plated
01-032-6028 1.188 1.394 .050
01-128-5065 1.778 2.000 .403 ID OD Thk
00-656-0397 2.156 2.563 .025 00-837-3338 .277 .375 .078
01-078-3829 2.375 2.790 00-478-9354 2.307 3.024 .026
00-187-7535 8.250 9.437 .062 00-466-2371 2.307 3.024 .090
Iron Steel, CRES

ID OD Thk ID OD Thk
00-171-6886 1.312 1.625 .031 00-579-2048 .656 .790 .031
00-579-2047 1.062 1.187 .031
Lead Alloy 01-025-2658 1.125 1.484 1.300
00-792-9948 1.135 1.350 .060
ID OD Thk 00-606-2256 1.377 1.996 .125
00-171-9898 .656 .812 .062 00-338-4001 1.928 2.250 .025
00-188-3291 2.437 3.000 .031 00-835-4911 2.041 2.264 .018
00-188-3300 8.250 9.250 .062 00-597-7407 2.531 2.875 .060
00-684-6698* 3.165 3.491 .030
Nickel Copper Alloy 00-080-6783 3.922 4.892 .040
01-033-2157 4.063 4.497 .434
ID OD Thk * Special clean for oxygen service
00-731-9165 .870 .900 .025
00-250-2049 1.250 1.500 .025 Steel, Nickel Plated
00-242-3688 1.375 1.730 .025
00-250-1261 1.500 1.750 .025 O/A Lg OD ID
00-596-7783 1.687 1.980 .025 00-679-8493 .440 .525 .028
01-121-2623 2.410 2.750 .030
Steel, Zinc Coated
Plastic
O/A Lg OD ID
ID OD Thk 00-215-5975 5.750 6.250 .032
00-945-4414 .437 .585 .010
00-948-0092 .517 .606 .050
00-952-5350 .578 .719 .030
SPACER, SLEEVE
00-200-9054 .580 .700 .045
Aluminum Anodized
00-580-2259 .618 .812 .143
01-121-8809 .760 1.000 O/A Lg OD ID
00-736-7720 .781 .969
00-580-4454 .187 .250 .130
00-905-2448 .882 1.175 .060
01-302-4478 .250 .188 .130
00-753-2359 1.031 1.343
00-684-2093 .250 .312 .214
00-810-9423 1.114 1.226 .062
01-296-9818 .375 .312 .214
00-111-3660 1.122 1.495 .124
01-289-9753 .500 .312 .214
00-558-0541 1.125 1.300 .046
01-358-1594 1.078 .875 .775
00-731-9092 1.127 1.498 .125
00-935-5603 1.281 .880 .777
00-914-0429 1.138 1.406
01-188-9690 1.420 3.645 3.482
00-476-2052 1.250 1.500 .016
00-980-3507 1.890 1.250 .062
Copper
00-860-5084 1.469 1.719 .124
00-814-0666 1.501 1.872 .124 O/A Lg OD ID
00-890-8067 1.508 1.865
00-938-1732 .106 .240 .100
2-174
CLASS 5365
Copper Alloy
O/A Lg OD ID
O/A Lg OD ID 00-367-7299 .421 .625 .317
00-398-7242 .250 1.562 .531 00-362-7173 .433 .563 .332
00-064-4381 .400 .187 .106 00-294-0535 .531 .938 .668
00-088-1046 .469 1.438 1.184 00-460-4882 .531 .937 .673
00-088-1047* 1.468 .250 .140 00-813-3678 .621 .592 .405
* Cadmium Plated 00-294-0600 .681 .526 .373
00-294-4109 .827 1.248 .876
Iron Alloy, Passivated 01-066-1248 .835 .625 .460
01-092-6000 .875 2.500 2.060
O/A Lg OD ID 00-608-0486 1.062 .781 .741
01-005-0786 .440 .438 .260 00-849-7253 1.230 1.250 1.000
01-007-4985 .630 .563 .319 00-379-1727 1.625 1.370 1.155
00-092-6882 2.126 1.874 1.574
Nickel Alloy 00-294-1262 5.925 .750 .523
O/A Lg OD ID Steel, Cadmium Plated
00-932-0892 1.219 1.688 1.375
00-892-2165 2.156 1.874 1.574 O/A Lg OD ID
00-892-2166 2.281 1.874 1.545 00-841-1977 .125 .312 .214
Plastic Steel, CRES

O/A Lg OD ID O/A Lg OD ID
00-001-6743 .406 1.125 .750 00-142-0384 .812 1.250 1.005
00-838-1550 .165 .490 .415 00-846-9229 .874 .592 .395
00-171-6332 .187 .343 .250 00-990-1701 8.063 .750 .523
00-585-5184 .250 .937 .764
00-834-0509 .400 .310 .174 Steel, Nickel Plated
00-469-4023 .433 .358 .251
01-057-7116 1.062 1.062 .875 O/A Lg OD ID
00-753-2227 .055 .169 .113
Steel 00-412-5635 .094 .312 .125
O/A Lg OD ID
00-761-1985 .221 1.600 1.195
00-334-7180 .250 .688 .516
00-849-2283 .354 .524 .375
2-175
2-176
Phone (215) 737-2336
DSN 444-2336
GROUP 55
LUMBER, MILLWORK, PLYWOOD AND VENEER
CLASS 5510
LUMBER AND RELATED BASIC WOOD MATERIALS
NOTE: As nonplastic alternatives to plastic items currently in use are identified, information will be provided through shopping advisory
DOWEL, WOOD PLANKING AND DECKING GRADE (PD) otherwise finished. Subfloors, sheathing, or
concrete forms. 6 to 14 feet.
Random
ASH, BEECH, BIRCH, OAK OR MAPLE Thk W
DOWELING. Smooth finish. 12 percent NO. 3 COMMON GRADE
00-267-2337 1 6
maximum moisture content. 36 inches long.
00-267-2340 2 6
For use as roof and wall, sub-flooring, boxes,
Dia crates and pallets.
00-237-8254 1/8 HARD MAPLE, ROUGH FINISHED. Air or kiln
00-223-7182 3/16 dried. Commercial grades under National
Surfaced 2 sides
00-240-0067 1/4 Hardwood Lumber Association (NHLA) rules.
00-223-0952 5/16 Random length 6 to 14 feet. Random
00-240-0068 3/8 Thk W
00-240-0069 1/2 SELECT GRADE 00-220-6078 1 4
00-240-0070 5/8 00-220-6080 1 6
00-240-0071 3/4 Random 00-220-6082 1 8
Thk W
00-223-0953 1 00-220-6084 1 10
00-267-2296 1 4 00-220-6086 1 12
00-267-2283 2 4
LUMBER, HARDWOOD
NO. 2 COMMON GRADE
WHITE OAK, ROUGH FINISH. Air or kiln dried.
WALNUT, ROUGH FINISH. Air or kiln dried. Commercial grades under National Hardwood
Commercial grades under the National For use as concrete forms, sub-flooring, blocking
Lumber Association (NHLA) rules. and crates.
Hardwood Lumber Association (NHLA) rules.
SELECT GRADE. Random length 6 to 14 feet. Air or kiln dried. Pentachlorophenol treated for
SELECT GRADE. Random length 6 to 10 feet.
Random paintability. Primarily for use where treated
Random Thk W lumber is required. 6 to 14 feet.
Thk W
00-267-2394 1 4
00-275-2551 1 4 00-267-2392* 1-1/4 6 Surfaced 4 sides
00-267-2402 1-1/2 4
WHITE ASH, ROUGH FINISH. Air or kiln dried. 00-267-2403 2 4 Random
Commercial grades under the National Thk W
00-267-2406 4 6
Hardwood Lumber Association (NHLA) rules. * 8 to 14 feet 00-285-6450 1 6
SELECT GRADE. Random length 6 to 16 feet. Number 1 COMMON GRADE. Random length 4 GRADE D SELECT
to 14 feet.
Random Air or kiln dried. Primarily for re-manufacture into
Thk W Random molding, trim, cabinet work or In service where a
00-267-2155 1 4 Thk W good finish is desired. 4 to 12 feet.
00-267-2158 2 4 00-267-2289 2 3
Surfaced 4 sides
MAHOGANY, ROUGH FINISH. Air or kiln dried. UNGRADED NATIONAL. Random length 4 to 12
Used In fabrication and construction. Not feet. Random
available for miscellaneous shop uses. Random Thk W
length 6 to 14 feet. Random 00-551-8689 1 4
Thk W 00-551-8688 1 6
00-267-2063 12 14 00-551-8705 1 12
SELECT GRADE
Random LUMBER, SOFTWOOD, BOARD GRADE B
Thk W
00-267-2416 1 6 BOARD LUMBER Alaska Yellow Cedar or Port Oxford White Cedar,
air or kiln dried. Primarily for use in planking for
AFRICAN, PAN-AMERICAN OR DARK RED CONSTRUCTION AND FABRICATION. Any and boats and ships. 5 to 12 feet or longer.
PHILIPPINE MAHOGANY, ROUGH FINISH. Air all species acceptable as listed In product
or kiln dried. For use in ship and boat standard 20 (PS20). Air or kiln dried. Primarily for Rough Finish
construction. 8 feet minimum length. use as a coverage where wood is not painted or
2-177
CLASS 5510
Surfaced 4 sides LUMBER, SOFTWOOD, TIMBER
Random
Thk W Random
Thk W No. 1 GRADE
00-220-4711 1-1/2 6
00-551-9872 2 4
00-551-9871* 2 6 Used for beams, stringers, posts, column and
LUMBER, SOFTWOOD, 00-551-9870 2 8 struts. Rough unsanded finish. 10 to 14 feet or
DIMENSION 00-551-9868 2 12 longer.
* 8 to 20 feet Random
CONSTRUCTION AND FABRICATION. Any and
all species acceptable as listed in product GRADE C, SELECT Thk W
standard 20 (PS29). 00-550-6825 6 6
00-551-9879* 12 12
Air or kiln dried. Primarily for high quality finish, * Creosote Treated
GRADE 3 interior trim, cabinet work, joiner work, and
shipwork. 4 to 12 feet.
Air or kiln dried. Primarily for low cost temporary PLUG, WOOD
construction, studs, boxes and craters. 6 to 14 Surfaced 4 sides
feet. SOFTWOOD. Used for damage control. Any
Random specie. Conical shape. Dimensions listed in
Surface 4 sides Thk W inches.
00-551-9672 2 10
Random 00-551-9671 2 12
Thk W
00-220-6242 2 4 GRADE B
00-220-6274* 4 4
* 8 to 13 feet Expensive high quality finish lumber. Air or kiln
dried. Primarily used for highest quality cabinet
GRADE 2 work and interior trim, clamps, gangways, and Small Large
spars. 4 to 12 feet. Dia Dia Lg
Air or kiln dried. Used for framing In ordinary
construction, boxes and crates, studding, rafters, 00-260-8953 0 1 3
Surfaced 4 sides 00-260-8958 0 2 4
joists, blocking, 6 to 14 feet.
00-260-8962 0 3 8
Random
Thk W 00-260-8966 1 5 10
Surfaced 4 sides 00-260-8969 3 7 10
00-551-9728 2 6 00-260-8973 4 8 10
Random 00-551-9731 2 12
Thk W 00-260-8949 7 10 12
00-220-6194 2 4 SELECT STRUCTURAL GRADE
00-220-6196 2 6 WEDGE, WOOD
00-220-6198 2 8 High quality construction, structural light framing
00-220-6202 2 12 joints and planks. Rough Finish 8 to 14 feet or PARALLEL SIDES, FEATHERED EDGE, BUTT
00-220-6226* 4 4 END PERPENDICULAR TO ONE FACE. Used
longer.
00-220-6228 4 6 to raise bodies, fill a space between two pieces
* Surfaced 2 or 4 sides Random of material, to effect a tight joint or connection or
Thk W to maintain a split or partial separation In a piece
No. 1 GRADE 00-551-9659 4 4 of material. NAVSHIPS Drawing S8800-461043.
00-551-9717 4 12
Untreated. Air or kiln dried. Primarily for light
framing In high quality construction. 6 to 14 feet SELECT STRUCTURAL
long.
Fire retardant treated damage control shoring.
Surfaced 4 sides Air or kiln dried. Rough unsanded Finish.
Plugging type. 2 inch taper per foot.
Random Thk/In W/In Lg/Ft
Thk W 00-663-4687 2 4 12 Thk W Lg
00-220-6146 2 4 00-663-4689 2 10 14 00-268-3479 2 2 8
00-220-6148 2 6 00-663-4693 4 4 12 00-268-3480 2 4 8
00-220-6154* 2 12 00-663-4695 6 6 14 00-268-3481 3 3 12
00-220-6178 4 4 00-268-3482 3 6 12
* Rough unsanded or surfaced 4
sides LUMBER, SOFTWOOD,
Shoring type. 1-1/2 inch taper per foot.
SCAFFOLD PLANK
NO. 1 GRADE Thk W Lg
Select structural grade. Used for scaffold plank
00-268-3475 1-1/2 2 12
Preservative treated. Above ground use. For for boats and ships.
00-268-3476 1-1/2 3 12
high quality construction under moderate 00-268-3477 2-1/4 3 18
Thk/In W/In Lg/Ft
weathering conditions where cleanliness or 00-268-3478 2-1/4 4 18
paintability is required. 8 to 20 feet long, except 00-550-6866 2 12 16
as noted. 00-551-9860 2 12 16
2-178
Phone (215) 737-2336
DSN 444-2336
CLASS 5530
PLYWOOD AND VENEER
PLYWOOD PLYWOOD, CONSTRUCTION 4 by 8 feet

Thk Ply
INTERIOR TYPE, COMMERCIAL GRADED. EXTERIOR TYPE, COMMERCIAL GRADED.
Softwood. Douglas Fir and/or Western softwood 00-128-5134 3/4 5
for faces, cross-bands and core. Moisture Softwood. Douglas Fir and/or Western softwood
resistant. Intended for interior application as well for faces, crossbands and core. Bonded with GRADE B-C, EXTERIOR SOLID 1 SIDE.
as application where it may be temporarily water proof adhesive that will retain its glue bond
exposed to the elements. Unit pack 1 sheet. when repeatedly wetted and dried or otherwise Primarily used for containers, crates and as
subjected to weather and is, therefore, intended utility building panels. Sanded 2 sides. May be
for permanent exterior exposure. Unit pack 1 used In lieu of Grade A-C.
sheet, unless specified.
4 by 8 feet
GRADE A-A SOFTWOOD INTERIOR
Thk Ply
Thk Ply 00-128-4475 1/4 3
00-128-5419* 3/8 5 00-128-5619 3/8 3
* Exterior glue 00-128-5059 1/2 3
00-128-4981 3/4 5
GRADE A-B, SOUND SOLID. Primarily for
marine use, signs and enclosures, where high GRADE C-C, EXTERIOR Primarily used for
quality appearance of one side is required. sheathing, containers, crates, pallets, and under
Sanded 2 sides. layments. Unsanded.
GRADE A-B, SOUND SOLID. Primarily used for 4 by 8 feet 4 by 8 feet, untreated.
cabinets, built-ins requiring one side to have a
Thk Ply Thk Ply
natural finish and the other side to be painted.
Sanded 2 sides, 3 ply. 00-262-8181 3/8 3 00-128-5143 1/2 3
00-262-8195 1/2 5
4 by 8 feet 00-262-8182 3/4 5 GRADE A-A, EXTERIOR. A marine plywood for
boat and ship construction and for special
Thk Ply GRADE A-C, EXTERIOR SOUND 1 SIDE. applications on vital equipment for extreme
00-262-8180* 1/4 3 Primarily used for siding and soffits where environments. Not intended for general
00-128-5475 1/2 3 appearance of one side only is important. construction where commercial exterior grades
00-128-5531 3/4 3 Sanded 2 sides. can be used.
00-129-2063* 1 7
* Exterior 4 by 8 feet Fir, Untreated. Sanded 2 sides 4 x 8 feet.
Thk Ply Thk

GRADE A-D, SOUND 1 FACE. Primarily used for
paneling, built ins and other one side uses. Also 00-129-7721 1/4 3 00-641-5843 3/4
for most uses in lieu of Grade A-B. Sanded 2 00-129-7749 3/8 3
sides. 00-129-7777 1/2 5 PLYWOOD, DECORATIVE
00-262-8179 5/8 5
4 by 8 feet 00-129-7833 3/4 GRADE B-C, EXTERIOR USE WHERE TWO
00-129-7889 1 SOLID SURFACES NECESSARY.
Thk
00-128-4751 1/4 GRADE B-B, EXTERIOR Primarily used as a 4 by 8 feet.
00-128-4005 1/2 concrete form. Sanded 2 sides.
Thk Ply
00-128-5059 3/4 5
2-179
2-180
Phone (817) 978-2051
DSN 874-3697/3698
GROUP 56
CONSTRUCTION AND BUILDING MATERIALS
CLASS 5610
MINERAL CONSTRUCTION MATERIALS, BULK
NOTE: As nonplastic alternatives to plastic items currently in use are identified, information will be provided through shopping advisory
DECK AND FLOOR COVERING Haze Gray, No. 36270

00-641-0427 1 gal can
SURFACE COMPOUND 00-857-4392NP 1 gal kit
00-857-4393NP 5 gal kit Dark Gull Gray, No. 36231
LIQUID SYNTHETIC RUBBER LATEX. WITH
UNDERLAY POWDER. White, No 27886 00-641-0426 1 gal can
Used under ceramic tile. 5 gallon kit. 00-857-2450NP 1 gal kit Light Gull Gray. No. 36440
Color 00-141-7842 1 gal can

SPRAY-ON-TYPE. Intended to provide safe
01-281-9740 Gray, Navy footing for both machinery and personnel under
Olive Drab. STD 595
01-281-9741 A/A dry, wet or oily conditions.
00-141-7838 1 gal can
DECK COVERING SEALING General Purpose
Seaplane Gray, No. 36081
COATING
Dull Black, No. 37038 00-599-9201 1 gal can
CLEAR, UNPIGMENTED SEALING COATING. 00-516-0021NP 5 gal kit
Used With Deck Covering. Terrazzo Mix. SMOOTH FINISH
00-285-1459 1 gal can Dark Gray, No. 36076
Black, No. 37038
00-285-1460 5 gal pail 00-519-1852NP 5 gal kit
00-641-0429 1 gal can
COATING COMPOUND, NONSLIP White, No 27886
Dark Gray, No. 36231
ROLL-ON TYPE, lightweight decking covering. 00-516-0022NP 5 gal kit
00-641-0428 1 gal can
Consisting of the base material and accelerator AIRCRAFT WING WALKS NONSLIP
COMPOUND. Brush application. FLIGHT DECK COMPOUND,
or curing agent. For use on metal or wood decks. NONSLIP
Dark Gray, No. 36076 Rough Finish
Aircraft Carrier Landing Areas
01-078-9283NP 5 gal kit Black, No. 37038
Dark Gray, No. 36076
00-516-0038 5 gal kit
2-181
2-182
Phone (817) 978-2051
DSN 874-3697/3698
CLASS 5640
WALLBOARD, BUILDING PAPER, AND THERMAL INSULATION MATERIALS
BUILDING BOARD, HARD surface temperature. Made of fire resistance,

Thk W Lg asbestos free, heat resisting compound. SPCC
PRESSED, VEGETABLE FIBER
01-371-3263NP 1 24 36 High Quality Control Item.
01-371-3262NP 2 24 36
TEMPERED PLAIN HARD BOARD, Brown IPS Thk/in. Lg/Ft
color, size 4 feet by 8 feet Intended for use as
HEAT RESISTANT COMPOUND. BUTT joints. 01-021-0191NP 1 1 3
industrial or building construction panes for
Used on machinery and equipment at surface 01-021-0193NP 1 2 3
interior or exterior application. Screen mesh,
temperatures up to 1500 degrees Fahrenheit.
indented one side.
3.36 inch length, 12 inch width. Scored across INSULATION SHEET, THERMAL
center of width to allow for separation.
Smooth one side
Thk W Lg Expanded unicellular elastomeric Plastic foam
Thk sheets. 48 to 56 inches long, 36 to 42 inches
00-267-1586NP 1 12 36
00-275-7459NP 1/8 wide.
00-267-1589NP 1-1/2 12 36
00-275-7451NP 3/16
00-267-1590NP 2 12 36 Thk
00-267-1591NP 2-1/2 12 36
Smooth both sides 00-237-4779 1/4
00-237-4780 3/8
00-849-9850NP 1/4 FACTORY FIBER. 1.49 maximum thermal 00-237-4781 1/2
conductivity at 2000 degree Fahrenheit. 2600 00-237-4782 3/4
degrees Fahrenheit temperature rating. 00-237-4786 1
CEMENT, INSULATION, HIGH
TEMPERATURE Thk W Lg
01-074-7875NP 1/2 24 36 INSULATION SLEEVING,
Composed of a dry mixture of refractory material THERMAL
or mineral fiber and a clay binder. Asbestos free. INSULATION BOARD, THERMAL
Intended for thermal control of irregular surfaces ASBESTOS FREE, HEAT RESISTING
and piping operating at temperatures between Polyamide Fiber material. 0.29 rated thermal COMPOUND. Suitable for temperature
100 and 1800 degrees Fahrenheit. conductivity at 75 degrees Fahrenheit mean conditions listed below. Molded round type, rigid,
3 foot long, split in half lengthwise. Pipe size
00-272-2995 50 lb bag temperature. Fiber Glass cloth-coated and
accommodated and insulation thickness are
00-142-6194 50 lb bag flameproof.
listed in inches.
Thk W Lg
MINERAL WOOL FIBER, HYDRAULIC 338 degrees Fahrenheit temperature rating.
SETTING THERMAL AND FINISHING 01-371-3266 1 24 48
CEMENT. Intended to provide a thermal 01-371-3264* 1 24 48 Pipe
01-371-3265 2 24 48 Size Thk
insulation for piping systems.Temperature range
* Not Fiber Glass Cloth-Coated.
of 100 to 1200 degrees Fahrenheit. 01-042-0971NP 3/4 1-1/2
01-042-0970NP 1 1-1/2
00-226-4540 50 lb bag INSULATION FELT, THERMAL 01-042-0968 1-1/4 1-1/2
01-042-0969NP 1-1/2 1-1/2
Fiber Glass material with no interwoven or 01-042-0966NP 1-3/4 1-1/2
INSULATION BLOCK, THERMAL thread bound construction. 0.42 at 300 degrees 01-042-0967NP 2-1/4 1-1/2
Fahrenheit. 01-042-0964 2-1/2 1-1/2
CORK. Butt joints. 0.29 at 75 degrees.
01-042-0965 3 1-1/2
Thk W Lg
Thk W Lg 01-042-0962 3-1/2 1-1/2
00-242-6034 2 24 48 01-042-0963 4 1-1/2
00-266-9706NP 1/2 12 36
00-266-9711NP* 1 12 36 01-042-0976 5 1-1/2
THERMAL INSULATION. Fiberglass laminated 01-042-0972 6 1-1/2
00-266-9709NP 3 12 36 and felted Intended for use as thermal insulation
* One decorative side sanded. on machinery and equipment, such as turbines, 750 degrees Fahrenheit temperature rating.
boilers and piping at temperatures up to 1200
FIBERGLASS CLOTH FACE. Butt joints. 0.23 at degrees Fahrenheit. Dimensions listed in inches. Pipe
75 degrees Fahrenheit. Used as hull and Size Thk
ventilation duct insulation. 36 inch length, 24 inch Thk W Lg 00-551-3480 1/2 2-1/2
width. 00-786-2229NP 1/2 60 900 00-279-7716 3/4 2-1/2
00-173-6591 1 60 540 00-207-8241NP 1-1/4 2-1/2
Thk W Lg
00-201-2602NP 1-1/2 2-1/2
00-809-6312NP 1 24 36 00-201-2615NP 2 3
00-809-6315NP 2 24 36
INSULATION PIPE COVERING,
THERMAL 00-201-2587NP 2-1/2 3
00-201-2595NP 3 3-1/2
Flameproof. .029 inches. At 75 degrees 00-201-2596NP 3-1/2 3-1/2
Special purpose. Intended for use on pipes
Fahrenheit mean temperature. 00-201-2583NP 4 3-1/2
operating up to 1200 degrees Fahrenheit.
2-183
CLASS 5640
3/4 inch thick insulation. MINERAL WOOL
Pipe
Size Thk ID 01-065-6769 48 x 24 x 5/8
00-201-2611NP 5 3-1/2 00-237-4816 5/8
00-551-3476NP 6 3-1/2 00-238-6024 7/8 WHITE FIBERGLASS FISSURED BOARD.
00-237-4817 1-1/16 Flameproof. Butt joint edges.
1200 degrees Fahrenheit temperature rating. 00-237-4820 1-3/8
00-237-4822 1-5/8 01-065-6769 48 x 24 x 5/8
Pipe 00-237-4824 2-1/8
Size Thk 00-237-4827 2-5/8 SOUND CONTROLLING FELT
00-163-8028NP 1/2 4 00-237-4829 3-1/8
00-163-8029NP 3/4 4 00-237-4828 3-1/2 LIGHTWEIGHT FLEXIBLE FIBERGLASS FELT.
00-237-4830 4 used for acoustical and thermal control
Expanded, flexible, unicellular elastomeric 00-237-4833 41/8 maximum temperature 400 degrees Fahrenheit
Plastic foam suitable for temperature conditions 00-237-4835 6-5/8 50 foot roll.
listed below. Molded round type, rigid 6 foot long 00-237-4836 8-5/8
split In half lengthwise. ID inches and insulation 00-542-3449NP 72 In wide, 2 In thk
thickness are listed in inches. 180 degrees 1 inch thick insulation.
Fahrenheit to minus 20 degrees Fahrenheit TAPE, DUCT
ID
temperature rating. 01-023-4192NP 1-1/8 Plastic coated cloth backed high tensile strength
01-023-4193NP 3 tape. Aluminum or Silver Gray color. Vapor proof,
1/2 inch thick insulation.
prevents dust, moisture and odors from entering
ID 1/8 inch thick insulation, 450 degrees Fahrenheit duct. May be used to secure duct installation. 60
to minus 65 degrees Fahrenheit temperature. yards long.
00-841-5220NP* 1/2
00-237-4792 5/8 ID 00-103-2254 2 In wide
00-841-5222NP* 3/4
00-568-4687 1/2 00-409-4265 2-1/2 In wide
00-444-7680 7/8
01-009-0041 7/8
00-237-4793 1-1/16
00-568-4640NP 1 TAPE, JOINT, WALLBOARD
00-237-4797 1-3/8 00-421-3818 1-1/4
00-237-4799 1-5/8 00-507-4104NP A/A
00-237-4801 1-7/8 Used to seal joints on wallboard. Length and
00-237-4802 2 width shown in inches.
00-237-4803 2-1/8 SOUND CONTROLLING BOARD
00-237-4806 2-1/2 Lg W
00-237-4807 2-5/8 WHITE FIBERGLASS PREFABRICATED 00-634-8891NP 250 2
00-237-4809 3-1/8 BOARD WITH PERFORATED FIBERGLASS
00-237-4808 3-1/2 CLOTH FACING. Flameproof. Butt joint edges.
00-237-4810 4
Used for acoustical purpose.
00-237-4812 5-9/16
* Glass fiber 3 foot long, 375 00-756-5866 36 x 24 x 2
degrees.
2-184
Phone (817) 978-2051
DSN 874-3697/3698
CLASS 5680
MISCELLANEOUS CONSTRUCTION MATERIALS
METAL, EXPANDED STEEL, UNCOATED MOLDING, COVE BASE

Mesh Mesh Strand Strand
EXPANDED METAL SHEETS 6 by 8 feet. Used W Lg W Thk RUBBER. Black color, 4 inches wide by 48
for nonstructural partitional bulkheads, deck inches long.
grating, top side storage baskets and other 00-222-4010 .480 1.200 .088 .048
general shipboard use. 00-222-4011 .136 2.000 .143 .090
00-222-4003* .480 1.200 .088 .048 00-477-6071
00-222-4004 .920 2.000 .095 .100
00-222-4005 .920 2.000 .143 .090 WEATHER STRIP
00-222-4006 .920 2.000 .143 .138
00-222-4007 1.330 3.000 .108 .090 SYNTHETIC RUBBER
00-222-4009 1.330 3.000 .136 .142
00-222-0358 1.412 4.000 A/A .243
Flexible, 3/16 inch thick by 1/2 inch wide.
* Zinc Coated
00-929-5118 50 foot coil
2-185
2-186
NIIN Cross Reference Index
Page Page Page Page

NIIN No. NIIN No. NIIN No. No.
00-000-0057 . . . . . . . 2-138 00-011-0141 . . . . . . . 2-74 00-019-9120 . . . . . . . 2-19 00-043-0267 . . . . . . . 2-21
00-000-0059 . . . . . . . 2-138 00-011-0143 . . . . . . . 2-74 00-020-0064 . . . . . . . 2-122 00-043-0302 . . . . . . . 2-155
00-000-0060 . . . . . . . 2-138 00-011-4646 . . . . . . . 2-69 00-020-0067 . . . . . . . 2-122 00-043-0511 . . . . . . . 2-95
00-001-4811 . . . . . . . 2-118 00-011-4649 . . . . . . . 2-69 00-020-0105 . . . . . . . 2-122 00-043-0520 . . . . . . . 2-57
00-001-6673 . . . . . . . 2-20 00-011-6549 . . . . . . . 2-11 00-020-0186 . . . . . . . 2-122 00-043-2681 . . . . . . . 2-21
00-001-6681 . . . . . . . 2-123 00-011-9120 . . . . . . . 2-75 00-020-0203 . . . . . . . 2-122 00-043-2682 . . . . . . . 2-21
00-001-6743 . . . . . . . 2-175 00-012-0123 . . . . . . . 2-75 00-020-3511 . . . . . . . 2-154 00-043-2684 . . . . . . . 2-21
00-001-9029 . . . . . . . 2-67 00-012-0493 . . . . . . . 2-47 00-021-2058 . . . . . . . 2-30 00-043-4682 . . . . . . . 2-90
00-003-0676 . . . . . . . 2-110 00-012-0809 . . . . . . . 2-76 00-021-3616 . . . . . . . 2-12 00-043-4708 . . . . . . . 2-66
00-003-0688 . . . . . . . 2-171 00-012-1869 . . . . . . . 2-151 00-021-3620 . . . . . . . 2-12 00-044-3146 . . . . . . . 2-76
00-003-4094 . . . . . . . 2-69 00-012-4553 . . . . . . . 2-74 00-021-3625 . . . . . . . 2-118 00-044-4153 . . . . . . . 2-13
00-003-4107 . . . . . . . 2-73 00-012-9521 . . . . . . . 2-130 00-021-3668 . . . . . . . 2-12 00-044-4190 . . . . . . . 2-157
00-003-9193 . . . . . . . 2-118 00-013-7214 . . . . . . . 2-75 00-021-3740 . . . . . . . 2-12 00-044-4234 . . . . . . . 2-79
00-003-9271 . . . . . . . 2-126 00-013-8646 . . . . . . . 2-154 00-021-3801 . . . . . . . 2-12 00-044-4855 . . . . . . . 2-77
00-004-1153 . . . . . . . 2-105 00-014-1195 . . . . . . . 2-80 00-021-3806 . . . . . . . 2-12 00-044-5726 . . . . . . . 2-118
00-004-1155 . . . . . . . 2-105 00-014-1198 . . . . . . . 2-80 00-021-3884 . . . . . . . 2-63 00-044-6234 . . . . . . . 2-65
00-004-4583 . . . . . . . 2-61 00-014-1346 . . . . . . . 2-80 00-021-3912 . . . . . . . 2-45 00-045-1879 . . . . . . . 2-93
00-004-5033 . . . . . . . 2-69 00-014-1359 . . . . . . . 2-80 00-021-8211 . . . . . . . 2-74 00-045-1884 . . . . . . . 2-94
00-004-7111 . . . . . . . 2-11 00-014-1766 . . . . . . . 2-19 00-023-2397 . . . . . . . 2-58 00-045-1915 . . . . . . . 2-48
00-005-0429 . . . . . . . 2-31 00-014-2583 . . . . . . . 2-137 00-024-2914 . . . . . . . 2-68 00-045-1922 . . . . . . . 2-95
00-005-0482 . . . . . . . 2-121 00-014-5855 . . . . . . . 2-62 00-025-0032 . . . . . . . 2-95 00-045-1933 . . . . . . . 2-94
00-005-0521 . . . . . . . 2-117 00-014-5970 . . . . . . . 2-136 00-025-2160 . . . . . . . 2-136 00-045-1937 . . . . . . . 2-48
00-005-0989 . . . . . . . 2-85 00-014-9211 . . . . . . . 2-32 00-026-2037 . . . . . . . 2-111 00-045-1950 . . . . . . . 2-95
00-005-1027 . . . . . . . 2-155 00-014-9247 . . . . . . . 2-32 00-026-3756 . . . . . . . 2-99 00-045-3180 . . . . . . . 2-21
00-005-6256 . . . . . . . 2-85 00-014-9262 . . . . . . . 2-32 00-026-7926 . . . . . . . 2-129 00-045-3181 . . . . . . . 2-21
00-005-6257 . . . . . . . 2-85 00-014-9289 . . . . . . . 2-32 00-027-0322 . . . . . . . 2-91 00-045-3182 . . . . . . . 2-21
00-005-6258 . . . . . . . 2-85 00-014-9301 . . . . . . . 2-32 00-027-5679 . . . . . . . 2-76 00-045-3296 . . . . . . . 2-69
00-005-8155 . . . . . . . 2-77 00-014-9304 . . . . . . . 2-32 00-027-5947 . . . . . . . 2-95 00-045-3299 . . . . . . . 2-69
00-006-0759 . . . . . . . 2-104 00-014-9307 . . . . . . . 2-32 00-027-5949 . . . . . . . 2-95 00-045-3526 . . . . . . . 2-5
00-006-0806 . . . . . . . 2-84 00-014-9349 . . . . . . . 2-33 00-031-0920 . . . . . . . 2-61 00-045-4007 . . . . . . . 2-69
00-006-2250 . . . . . . . 2-61 00-014-9352 . . . . . . . 2-33 00-031-1504 . . . . . . . 2-4 00-045-4027 . . . . . . . 2-130
00-006-4757 . . . . . . . 2-104 00-014-9355 . . . . . . . 2-33 00-033-7080 . . . . . . . 2-130 00-045-4559 . . . . . . . 2-119
00-006-8202 . . . . . . . 2-166 00-014-9367 . . . . . . . 2-33 00-034-1122 . . . . . . . 2-30 00-045-5214 . . . . . . . 2-66
00-007-0180 . . . . . . . 2-119 00-014-9394 . . . . . . . 2-33 00-034-1127 . . . . . . . 2-30 00-045-5218 . . . . . . . 2-66
00-007-3295 . . . . . . . 2-90 00-014-9400 . . . . . . . 2-33 00-034-1130 . . . . . . . 2-30 00-045-5220 . . . . . . . 2-66
00-007-5772 . . . . . . . 2-110 00-014-9412 . . . . . . . 2-33 00-034-1150 . . . . . . . 2-30 00-045-8338 . . . . . . . 2-25
00-007-9881 . . . . . . . 2-23 00-014-9427 . . . . . . . 2-33 00-034-1152 . . . . . . . 2-30 00-045-9025 . . . . . . . 2-105
00-008-3668 . . . . . . . 2-23 00-014-9479 . . . . . . . 2-138 00-034-1215 . . . . . . . 2-30 00-047-2965 . . . . . . . 2-64
00-008-3719 . . . . . . . 2-84 00-014-9926 . . . . . . . 2-33 00-034-1234 . . . . . . . 2-30 00-050-1076 . . . . . . . 2-13
00-008-7123 . . . . . . . 2-144 00-015-0859 . . . . . . . 2-33 00-034-1239 . . . . . . . 2-30 00-050-1094 . . . . . . . 2-151
00-009-0534 . . . . . . . 2-119 00-015-0919 . . . . . . . 2-33 00-034-3924 . . . . . . . 2-79 00-050-3277 . . . . . . . 2-62
00-009-0683 . . . . . . . 2-61 00-015-0995 . . . . . . . 2-33 00-034-3927 . . . . . . . 2-79 00-050-4212 . . . . . . . 2-13
00-010-1145 . . . . . . . 2-29 00-015-1001 . . . . . . . 2-33 00-036-9305 . . . . . . . 2-93 00-050-5118 . . . . . . . 2-1
00-010-2108 . . . . . . . 2-33 00-016-1615 . . . . . . . 2-32 00-037-6902 . . . . . . . 2-65 00-050-5661 . . . . . . . 2-166
00-010-3070 . . . . . . . 2-73 00-016-8286 . . . . . . . 2-47 00-038-0737 . . . . . . . 2-173 00-050-6646 . . . . . . . 2-62
. . . . . . . 2-74 00-017-5121 . . . . . . . 2-62 00-038-2922 . . . . . . . 2-117 00-050-9227 . . . . . . . 2-28
00-010-3090 . . . . . . . 2-137 00-017-6143 . . . . . . . 2-40 00-038-8042 . . . . . . . 2-31 00-050-9229 . . . . . . . 2-28
00-010-3091 . . . . . . . 2-57 00-017-6414 . . . . . . . 2-96 00-038-8931 . . . . . . . 2-127 00-050-9230 . . . . . . . 2-28
00-010-4655 . . . . . . . 2-74 00-017-9252 . . . . . . . 2-75 00-039-5563 . . . . . . . 2-79 00-050-9231 . . . . . . . 2-28
00-010-4659 . . . . . . . 2-74 00-018-7069 . . . . . . . 2-13 00-042-0964 . . . . . . . 2-67 00-050-9233 . . . . . . . 2-28
00-010-4661 . . . . . . . 2-74 00-019-0669 . . . . . . . 2-69 00-042-4968 . . . . . . . 2-61 00-050-9234 . . . . . . . 2-28
00-010-4665 . . . . . . . 2-74 00-019-2409 . . . . . . . 2-74 00-042-6572 . . . . . . . 2-67 00-050-9235 . . . . . . . 2-28
00-010-8423 . . . . . . . 2-165 00-019-6299 . . . . . . . 2-133 00-042-9477 . . . . . . . 2-13 00-050-9238 . . . . . . . 2-28
2-187
Page Page Page Page

00-050-9401 . . . . . . . 2-45 00-052-8907 . . . . . . . 2-32 00-054-6660 . . . . . . . 2-28 00-058-6081 . . . . . . . 2-79
00-051-0029 . . . . . . . 2-135 00-052-9048 . . . . . . . 2-32 00-054-6661 . . . . . . . 2-28 00-058-6428 . . . . . . . 2-56
00-051-0227 . . . . . . . 2-26 00-052-9050 . . . . . . . 2-32 00-054-6662 . . . . . . . 2-28 00-058-6430 . . . . . . . 2-60
00-051-1327 . . . . . . . 2-173 00-052-9051 . . . . . . . 2-32 00-054-6666 . . . . . . . 2-28 00-058-9379 . . . . . . . 2-36
00-051-2352 . . . . . . . 2-25 00-052-9052 . . . . . . . 2-32 00-054-6667 . . . . . . . 2-28 00-058-9380 . . . . . . . 2-36
00-051-4484 . . . . . . . 2-34 00-052-9730 . . . . . . . 2-118 00-054-6668 . . . . . . . 2-28 00-058-9385 . . . . . . . 2-36
00-051-4502 . . . . . . . 2-34 00-052-9802 . . . . . . . 2-21 00-054-6669 . . . . . . . 2-28 00-058-9389 . . . . . . . 2-36
00-051-4887 . . . . . . . 2-93 00-053-0252 . . . . . . . 2-97 00-054-6670 . . . . . . . 2-28 00-058-9698 . . . . . . . 2-79
00-051-6066 . . . . . . . 2-103 00-053-0692 . . . . . . . 2-104 00-054-6671 . . . . . . . 2-28 00-058-9727 . . . . . . . 2-79
00-051-6521 . . . . . . . 2-25 00-053-1087 . . . . . . . 2-24 00-054-6672 . . . . . . . 2-28 00-058-9731 . . . . . . . 2-79
00-051-6751 . . . . . . . 2-15 00-053-5647 . . . . . . . 2-111 00-054-6673 . . . . . . . 2-28 00-058-9737 . . . . . . . 2-79
00-051-6891 . . . . . . . 2-79 00-054-0088 . . . . . . . 2-90 00-054-6674 . . . . . . . 2-28 00-058-9747 . . . . . . . 2-79
00-051-8308 . . . . . . . 2-25 00-054-1011 . . . . . . . 2-9 00-054-6675 . . . . . . . 2-28 00-058-9756 . . . . . . . 2-79
00-051-8499 . . . . . . . 2-32 00-054-1435 . . . . . . . 2-45 00-054-6676 . . . . . . . 2-28 00-058-9765 . . . . . . . 2-79
00-051-8606 . . . . . . . 2-15 00-054-2265 . . . . . . . 2-17 00-054-6677 . . . . . . . 2-28 00-058-9767 . . . . . . . 2-79
00-051-8608 . . . . . . . 2-16 00-054-2266 . . . . . . . 2-17 00-054-6680 . . . . . . . 2-28 00-058-9780 . . . . . . . 2-79
00-051-9133 . . . . . . . 2-140 00-054-3220 . . . . . . . 2-74 00-054-8416 . . . . . . . 2-84 00-058-9782 . . . . . . . 2-79
00-051-9867 . . . . . . . 2-81 00-054-4530 . . . . . . . 2-94 00-054-8546 . . . . . . . 2-119 00-058-9784 . . . . . . . 2-79
00-052-1457 . . . . . . . 2-12 00-054-5044 . . . . . . . 2-96 00-054-9242 . . . . . . . 2-21 00-058-9808 . . . . . . . 2-79
00-052-1972 . . . . . . . 2-84 00-054-5635 . . . . . . . 2-27 00-055-2797 . . . . . . . 2-15 00-058-9812 . . . . . . . 2-79
00-052-2266 . . . . . . . 2-90 00-054-5636 . . . . . . . 2-27 00-055-5055 . . . . . . . 2-172 00-059-0491 . . . . . . . 2-75
00-052-3033 . . . . . . . 2-135 00-054-5637 . . . . . . . 2-27 00-056-3395 . . . . . . . 2-57 00-059-0494 . . . . . . . 2-75
00-052-3540 . . . . . . . 2-80 00-054-5638 . . . . . . . 2-27 00-056-9536 . . . . . . . 2-34 00-059-2490 . . . . . . . 2-36
00-052-4020 . . . . . . . 2-137 00-054-5639 . . . . . . . 2-27 00-056-9961 . . . . . . . 2-26 00-059-3652 . . . . . . . 2-17
00-052-5267 . . . . . . . 2-118 00-054-5640 . . . . . . . 2-27 00-056-9962 . . . . . . . 2-26 00-059-3655 . . . . . . . 2-28
00-052-5915 . . . . . . . 2-24 00-054-5641 . . . . . . . 2-27 00-057-0487 . . . . . . . 2-21 00-059-3656 . . . . . . . 2-28
00-052-5923 . . . . . . . 2-24 00-054-5642 . . . . . . . 2-27 00-057-0489 . . . . . . . 2-21 00-059-3657 . . . . . . . 2-28
00-052-5925 . . . . . . . 2-24 00-054-5643 . . . . . . . 2-27 00-057-0490 . . . . . . . 2-21 00-059-3658 . . . . . . . 2-28
00-052-5926 . . . . . . . 2-24 00-054-5645 . . . . . . . 2-28 00-057-0491 . . . . . . . 2-21 00-059-3659 . . . . . . . 2-28
00-052-5935 . . . . . . . 2-24 00-054-5646 . . . . . . . 2-28 00-057-0492 . . . . . . . 2-21 00-059-3660 . . . . . . . 2-28
00-052-5937 . . . . . . . 2-24 00-054-5647 . . . . . . . 2-28 00-057-0493 . . . . . . . 2-21 00-059-3661 . . . . . . . 2-28
00-052-5941 . . . . . . . 2-24 00-054-5648 . . . . . . . 2-28 00-057-0495 . . . . . . . 2-21 00-059-3662 . . . . . . . 2-28
00-052-6362 . . . . . . . 2-70 00-054-5649 . . . . . . . 2-28 00-057-0573 . . . . . . . 2-67 00-059-3663 . . . . . . . 2-28
00-052-6456 . . . . . . . 2-15 00-054-5650 . . . . . . . 2-28 00-057-1706 . . . . . . . 2-84 00-059-3664 . . . . . . . 2-28
00-052-6866 . . . . . . . 2-31 00-054-5651 . . . . . . . 2-28 00-057-4593 . . . . . . . 2-15 00-059-3665 . . . . . . . 2-28
00-052-7056 . . . . . . . 2-77 00-054-5652 . . . . . . . 2-28 00-057-5706 . . . . . . . 2-90 00-059-3667 . . . . . . . 2-28
00-052-7405 . . . . . . . 2-32 00-054-5653 . . . . . . . 2-28 00-057-5709 . . . . . . . 2-126 00-059-3673 . . . . . . . 2-28
00-052-7431 . . . . . . . 2-24 00-054-5654 . . . . . . . 2-28 00-057-6367 . . . . . . . 2-98 00-059-3676 . . . . . . . 2-28
00-052-7449 . . . . . . . 2-24 00-054-5655 . . . . . . . 2-28 00-057-7794 . . . . . . . 2-156 00-059-4550 . . . . . . . 2-25
00-052-7451 . . . . . . . 2-24 00-054-5656 . . . . . . . 2-28 00-057-9586 . . . . . . . 2-24 00-059-4553 . . . . . . . 2-25
00-052-7482 . . . . . . . 2-24 00-054-5657 . . . . . . . 2-28 00-057-9985 . . . . . . . 2-80 00-059-4568 . . . . . . . 2-25
00-052-7484 . . . . . . . 2-24 00-054-6346 . . . . . . . 2-78 00-058-1082 . . . . . . . 2-32 00-059-4573 . . . . . . . 2-25
00-052-7495 . . . . . . . 2-15 00-054-6649 . . . . . . . 2-28 00-058-1703 . . . . . . . 2-77 00-059-5438 . . . . . . . 2-156
00-052-7500 . . . . . . . 2-32 00-054-6650 . . . . . . . 2-28 00-058-1823 . . . . . . . 2-61 00-059-6363 . . . . . . . 2-169
00-052-7533 . . . . . . . 2-118 00-054-6651 . . . . . . . 2-28 00-058-1993 . . . . . . . 2-78 00-059-6515 . . . . . . . 2-119
00-052-8238 . . . . . . . 2-32 00-054-6652 . . . . . . . 2-28 00-058-2575 . . . . . . . 2-22 00-059-7503 . . . . . . . 2-119
00-052-8240 . . . . . . . 2-32 00-054-6653 . . . . . . . 2-28 00-058-3632 . . . . . . . 2-66 00-059-7576 . . . . . . . 2-30
00-052-8241 . . . . . . . 2-32 00-054-6654 . . . . . . . 2-28 00-058-4006 . . . . . . . 2-21 00-059-8247 . . . . . . . 2-27
00-052-8242 . . . . . . . 2-32 00-054-6655 . . . . . . . 2-28 00-058-4011 . . . . . . . 2-21 00-059-8248 . . . . . . . 2-27
00-052-8875 . . . . . . . 2-32 00-054-6656 . . . . . . . 2-28 00-058-5051 . . . . . . . 2-25 00-059-8249 . . . . . . . 2-27
00-052-8887 . . . . . . . 2-32 00-054-6657 . . . . . . . 2-28 00-058-5924 . . . . . . . 2-79 00-059-8255 . . . . . . . 2-27
00-052-8903 . . . . . . . 2-32 00-054-6658 . . . . . . . 2-28 00-058-6077 . . . . . . . 2-79 00-059-8256 . . . . . . . 2-27
00-052-8904 . . . . . . . 2-32 00-054-6659 . . . . . . . 2-28 00-058-6079 . . . . . . . 2-79 00-059-8263 . . . . . . . 2-27
2-188
Page Page Page Page

00-059-8280 . . . . . . . 2-27 00-066-7323 . . . . . . . 2-21 00-068-7837 . . . . . . . 2-14 00-074-1576 . . . . . . . 2-136
00-059-8733 . . . . . . . 2-66 00-066-7325 . . . . . . . 2-26 00-068-8202 . . . . . . . 2-15 00-074-1586 . . . . . . . 2-31
00-059-8753 . . . . . . . 2-119 00-066-7326 . . . . . . . 2-26 00-068-8431 . . . . . . . 2-15 00-074-3301 . . . . . . . 2-91
00-059-9061 . . . . . . . 2-95 00-066-8691 . . . . . . . 2-97 00-068-9156 . . . . . . . 2-23 00-075-3221 . . . . . . . 2-118
00-059-9263 . . . . . . . 2-62 00-066-9611 . . . . . . . 2-138 00-068-9167 . . . . . . . 2-24 00-075-3690 . . . . . . . 2-136
00-059-9264 . . . . . . . 2-62 00-067-3461 . . . . . . . 2-30 00-068-9185 . . . . . . . 2-23 00-076-0377 . . . . . . . 2-55
00-059-9265 . . . . . . . 2-62 00-067-3659 . . . . . . . 2-155 00-069-5124 . . . . . . . 2-140 00-076-4071 . . . . . . . 2-83
00-059-9266 . . . . . . . 2-62 00-067-3871 . . . . . . . 2-75 00-069-5291 . . . . . . . 2-68 00-077-0606 . . . . . . . 2-130
00-060-2039 . . . . . . . 2-61 00-067-5672 . . . . . . . 2-67 00-070-0385 . . . . . . . 2-172 00-077-1458 . . . . . . . 2-113
00-061-2067 . . . . . . . 2-64 00-067-5716 . . . . . . . 2-96 00-070-0386 . . . . . . . 2-93 00-078-0046 . . . . . . . 2-135
00-061-2359 . . . . . . . 2-127 00-067-6408 . . . . . . . 2-118 00-071-1228 . . . . . . . 2-49 00-078-0246 . . . . . . . 2-31
00-061-2360 . . . . . . . 2-127 00-067-7775 . . . . . . . 2-60 00-071-1315 . . . . . . . 2-28 00-078-3905 . . . . . . . 2-9
00-061-2361 . . . . . . . 2-127 00-067-8511 . . . . . . . 2-49 00-071-1316 . . . . . . . 2-28 00-078-8381 . . . . . . . 2-127
00-061-2379 . . . . . . . 2-127 00-067-9232 . . . . . . . 2-66 00-071-1318 . . . . . . . 2-28 00-078-8947 . . . . . . . 2-8
00-061-2839 . . . . . . . 2-137 00-067-9491 . . . . . . . 2-67 00-071-1322 . . . . . . . 2-25 00-078-8948 . . . . . . . 2-8
00-061-7325 . . . . . . . 2-62 00-067-9743 . . . . . . . 2-172 00-071-1323 . . . . . . . 2-25 00-078-8949 . . . . . . . 2-8
00-061-7326 . . . . . . . 2-62 00-067-9875 . . . . . . . 2-147 00-071-1324 . . . . . . . 2-25 00-078-8950 . . . . . . . 2-8
00-061-9104 . . . . . . . 2-105 00-067-9878 . . . . . . . 2-147 00-071-1325 . . . . . . . 2-25 00-079-1967 . . . . . . . 2-58
00-062-1847 . . . . . . . 2-138 00-067-9880 . . . . . . . 2-147 00-071-1327 . . . . . . . 2-25 00-079-2078 . . . . . . . 2-76
00-062-2374 . . . . . . . 2-89 00-068-0252 . . . . . . . 2-76 00-071-1784 . . . . . . . 2-13 00-079-4578 . . . . . . . 2-118
00-062-4954 . . . . . . . 2-62 00-068-0405 . . . . . . . 2-86 00-071-1786 . . . . . . . 2-14 00-079-5835 . . . . . . . 2-26
00-062-9602 . . . . . . . 2-60 00-068-0500 . . . . . . . 2-13 00-071-1788 . . . . . . . 2-14 00-080-0099 . . . . . . . 2-45
00-063-3503 . . . . . . . 2-25 00-068-0501 . . . . . . . 2-13 00-071-2059 . . . . . . . 2-14 00-080-0100 . . . . . . . 2-45
00-063-3507 . . . . . . . 2-25 00-068-0502 . . . . . . . 2-13 00-071-2067 . . . . . . . 2-14 00-080-0109 . . . . . . . 2-45
00-063-4568 . . . . . . . 2-32 00-068-0504 . . . . . . . 2-13 00-071-2068 . . . . . . . 2-14 00-080-0170 . . . . . . . 2-80
00-063-6716 . . . . . . . 2-59 00-068-0508 . . . . . . . 2-14 00-071-2069 . . . . . . . 2-14 00-080-1846 . . . . . . . 2-166
00-063-7366 . . . . . . . 2-80 00-068-0509 . . . . . . . 2-14 00-071-2070 . . . . . . . 2-14 00-080-1942 . . . . . . . 2-80
00-063-7682 . . . . . . . 2-47 00-068-0510 . . . . . . . 2-15 00-071-2071 . . . . . . . 2-14 00-080-1943 . . . . . . . 2-80
00-063-7683 . . . . . . . 2-47 00-068-0511 . . . . . . . 2-14 00-071-2072 . . . . . . . 2-14 00-080-6783 . . . . . . . 2-174
00-063-9016 . . . . . . . 2-79 00-068-0515 . . . . . . . 2-14 00-071-2073 . . . . . . . 2-14 00-080-8495 . . . . . . . 2-59
00-063-9097 . . . . . . . 2-64 00-068-0516 . . . . . . . 2-14 00-071-2074 . . . . . . . 2-14 00-081-3381 . . . . . . . 2-145
00-063-9099 . . . . . . . 2-171 00-068-0529 . . . . . . . 2-137 00-071-2077 . . . . . . . 2-14 00-081-4219 . . . . . . . 2-66
00-063-9627 . . . . . . . 2-136 00-068-0540 . . . . . . . 2-16 00-071-2079 . . . . . . . 2-14 00-081-4719 . . . . . . . 2-9
00-064-2470 . . . . . . . 2-78 00-068-0541 . . . . . . . 2-16 00-071-2081 . . . . . . . 2-14 00-081-6052 . . . . . . . 2-7
00-064-2570 . . . . . . . 2-126 00-068-0543 . . . . . . . 2-16 00-071-2083 . . . . . . . 2-14 00-081-6668 . . . . . . . 2-25
00-064-2652 . . . . . . . 2-171 00-068-1814 . . . . . . . 2-23 00-071-2087 . . . . . . . 2-28 00-081-6829 . . . . . . . 2-79
00-064-2699 . . . . . . . 2-80 00-068-1817 . . . . . . . 2-23 00-071-2093 . . . . . . . 2-28 00-081-6910 . . . . . . . 2-119
00-064-4381 . . . . . . . 2-175 00-068-2500 . . . . . . . 2-118 00-071-2204 . . . . . . . 2-118 00-081-7016 . . . . . . . 2-80
00-064-8384 . . . . . . . 2-30 00-068-4358 . . . . . . . 2-118 00-071-2214 . . . . . . . 2-23 00-081-7874 . . . . . . . 2-80
00-064-8388 . . . . . . . 2-30 00-068-4382 . . . . . . . 2-119 00-071-2233 . . . . . . . 2-13 00-081-8087 . . . . . . . 2-61
00-064-8389 . . . . . . . 2-30 00-068-5276 . . . . . . . 2-15 00-071-2237 . . . . . . . 2-13 00-081-8307 . . . . . . . 2-84
00-064-8390 . . . . . . . 2-30 00-068-5287 . . . . . . . 2-26 00-071-2499 . . . . . . . 2-21 00-082-6721 . . . . . . . 2-28
00-064-8391 . . . . . . . 2-30 00-068-5398 . . . . . . . 2-15 00-071-2505 . . . . . . . 2-14 00-082-6734 . . . . . . . 2-25
00-064-8577 . . . . . . . 2-106 00-068-5405 . . . . . . . 2-15 00-071-2509 . . . . . . . 2-14 00-082-6738 . . . . . . . 2-25
00-064-8804 . . . . . . . 2-114 00-068-5407 . . . . . . . 2-15 00-071-2510 . . . . . . . 2-14 00-082-6739 . . . . . . . 2-25
00-065-5187 . . . . . . . 2-68 00-068-5409 . . . . . . . 2-15 00-071-2513 . . . . . . . 2-14 00-082-6780 . . . . . . . 2-22
00-066-1286 . . . . . . . 2-111 00-068-5410 . . . . . . . 2-15 00-071-2519 . . . . . . . 2-14 00-082-6782 . . . . . . . 2-35
00-066-1457 . . . . . . . 2-136 00-068-5411 . . . . . . . 2-15 00-071-3234 . . . . . . . 2-67 00-082-6967 . . . . . . . 2-27
00-066-2196 . . . . . . . 2-55 00-068-5412 . . . . . . . 2-15 00-072-3665 . . . . . . . 2-119 00-082-8231 . . . . . . . 2-155
00-066-2413 . . . . . . . 2-118 00-068-5414 . . . . . . . 2-15 00-072-8894 . . . . . . . 2-80 00-082-8246 . . . . . . . 2-77
00-066-4289 . . . . . . . 2-64 00-068-5415 . . . . . . . 2-15 00-073-2629 . . . . . . . 2-154 00-083-0678 . . . . . . . 2-127
00-066-5799 . . . . . . . 2-106 00-068-5823 . . . . . . . 2-23 00-073-4109 . . . . . . . 2-165 00-084-3318 . . . . . . . 2-41
00-066-7322 . . . . . . . 2-21 00-068-5825 . . . . . . . 2-23 00-074-0881 . . . . . . . 2-4 00-084-4328 . . . . . . . 2-92
2-189
Page Page Page Page

00-085-4124 . . . . . . . 2-96 00-106-6321 . . . . . . . 2-41 00-117-6839 . . . . . . . 2-86 . . . . . . . 2-179
00-086-4988 . . . . . . . 2-9 00-107-1600 . . . . . . . 2-55 00-117-6840 . . . . . . . 2-86 00-128-5134 . . . . . . . 2-179
00-087-0172 . . . . . . . 2-114 00-107-2229 . . . . . . . 2-62 00-117-6841 . . . . . . . 2-86 00-128-5143 . . . . . . . 2-179
00-087-0775 . . . . . . . 2-45 00-107-9068 . . . . . . . 2-170 00-117-6843 . . . . . . . 2-86 00-128-5419 . . . . . . . 2-179
00-087-0779 . . . . . . . 2-45 00-108-9988 . . . . . . . 2-49 00-117-6845 . . . . . . . 2-86 00-128-5475 . . . . . . . 2-179
00-087-0790 . . . . . . . 2-45 00-109-7436 . . . . . . . 2-29 00-117-6851 . . . . . . . 2-86 00-128-5531 . . . . . . . 2-179
00-087-1628 . . . . . . . 2-45 00-109-9007 . . . . . . . 2-64 00-117-6853 . . . . . . . 2-86 00-128-5619 . . . . . . . 2-179
00-087-1630 . . . . . . . 2-45 00-110-2981 . . . . . . . 2-151 00-117-6856 . . . . . . . 2-86 00-129-2063 . . . . . . . 2-179
00-087-4652 . . . . . . . 2-61 00-110-3600 . . . . . . . 2-111 00-117-6880 . . . . . . . 2-86 00-129-7721 . . . . . . . 2-179
00-087-8226 . . . . . . . 2-80 00-110-3604 . . . . . . . 2-106 00-117-6881 . . . . . . . 2-86 00-129-7749 . . . . . . . 2-179
00-088-0551 . . . . . . . 2-61 00-110-6222 . . . . . . . 2-111 00-117-6883 . . . . . . . 2-86 00-129-7777 . . . . . . . 2-179
00-088-0552 . . . . . . . 2-61 00-110-8813 . . . . . . . 2-169 00-117-6884 . . . . . . . 2-86 00-129-7833 . . . . . . . 2-179
00-088-0553 . . . . . . . 2-61 00-111-2211 . . . . . . . 2-135 00-117-6885 . . . . . . . 2-86 00-129-7889 . . . . . . . 2-179
00-088-1046 . . . . . . . 2-175 00-111-3606 . . . . . . . 2-77 00-117-6888 . . . . . . . 2-86 00-132-5693 . . . . . . . 2-1
00-088-1047 . . . . . . . 2-175 00-111-3660 . . . . . . . 2-174 00-117-6937 . . . . . . . 2-86 00-132-5699 . . . . . . . 2-7
00-088-1054 . . . . . . . 2-81 00-111-3681 . . . . . . . 2-6 00-117-6938 . . . . . . . 2-86 00-132-8069 . . . . . . . 2-73
00-088-1251 . . . . . . . 2-61 00-111-3813 . . . . . . . 2-64 00-117-6939 . . . . . . . 2-86 00-132-8073 . . . . . . . 2-73
00-088-1607 . . . . . . . 2-46 00-111-7491 . . . . . . . 2-23 00-117-6941 . . . . . . . 2-86 00-133-9791 . . . . . . . 2-123
00-088-1609 . . . . . . . 2-79 00-112-1382 . . . . . . . 2-137 00-117-6942 . . . . . . . 2-86 00-135-1125 . . . . . . . 2-85
00-088-1610 . . . . . . . 2-79 00-112-7220 . . . . . . . 2-103 00-117-6948 . . . . . . . 2-86 00-135-5144 . . . . . . . 2-77
00-088-1611 . . . . . . . 2-80 00-112-9775 . . . . . . . 2-109 00-117-6949 . . . . . . . 2-86 00-135-7227 . . . . . . . 2-118
00-088-1612 . . . . . . . 2-81 00-113-3771 . . . . . . . 2-41 00-117-6950 . . . . . . . 2-86 00-136-2942 . . . . . . . 2-51
00-088-6014 . . . . . . . 2-77 00-113-4205 . . . . . . . 2-60 00-117-6951 . . . . . . . 2-86 00-136-5673 . . . . . . . 2-120
00-088-8719 . . . . . . . 2-126 00-113-6215 . . . . . . . 2-105 00-117-6952 . . . . . . . 2-86 00-137-3036 . . . . . . . 2-63
00-088-8996 . . . . . . . 2-25 00-113-6247 . . . . . . . 2-139 00-117-6953 . . . . . . . 2-86 00-138-4440 . . . . . . . 2-118
00-088-9044 . . . . . . . 2-29 00-113-6274 . . . . . . . 2-158 00-117-6956 . . . . . . . 2-86 00-138-6466 . . . . . . . 2-94
00-088-9665 . . . . . . . 2-21 00-114-1978 . . . . . . . 2-18 00-118-2933 . . . . . . . 2-37 00-139-0011 . . . . . . . 2-41
00-088-9666 . . . . . . . 2-26 00-115-1357 . . . . . . . 2-119 00-118-5737 . . . . . . . 2-55 00-139-0179 . . . . . . . 2-73
00-088-9667 . . . . . . . 2-26 00-115-6138 . . . . . . . 2-46 00-118-6659 . . . . . . . 2-138 00-139-0328 . . . . . . . 2-89
00-088-9671 . . . . . . . 2-21 00-115-6358 . . . . . . . 2-98 00-118-9090 . . . . . . . 2-118 00-140-8122 . . . . . . . 2-155
00-089-3000 . . . . . . . 2-73 00-115-6365 . . . . . . . 2-99 00-119-4750 . . . . . . . 2-167 00-141-1767 . . . . . . . 2-60
00-089-9303 . . . . . . . 2-172 00-115-6368 . . . . . . . 2-84 00-119-6774 . . . . . . . 2-86 00-141-1768 . . . . . . . 2-60
00-090-5394 . . . . . . . 2-84 00-115-6848 . . . . . . . 2-168 00-119-7452 . . . . . . . 2-12 00-141-1795 . . . . . . . 2-65
00-090-9621 . . . . . . . 2-106 00-115-9416 . . . . . . . 2-30 00-121-2466 . . . . . . . 2-119 00-141-2453 . . . . . . . 2-108
00-092-6882 . . . . . . . 2-175 00-115-9526 . . . . . . . 2-14 00-121-2475 . . . . . . . 2-119 00-141-3010 . . . . . . . 2-57
00-094-1830 . . . . . . . 2-81 00-115-9621 . . . . . . . 2-48 00-121-2676 . . . . . . . 2-43 00-141-4002 . . . . . . . 2-90
00-097-6510 . . . . . . . 2-114 00-116-0034 . . . . . . . 2-18 00-121-2996 . . . . . . . 2-12 00-141-4003 . . . . . . . 2-90
00-097-6527 . . . . . . . 2-89 00-116-0081 . . . . . . . 2-66 00-122-9648 . . . . . . . 2-110 00-141-6943 . . . . . . . 2-165
00-097-7306 . . . . . . . 2-41 00-116-1422 . . . . . . . 2-43 00-122-9721 . . . . . . . 2-46 00-141-6944 . . . . . . . 2-165
00-097-7307 . . . . . . . 2-41 00-116-1426 . . . . . . . 2-43 00-123-2499 . . . . . . . 2-60 00-141-7134 . . . . . . . 2-98
00-097-9838 . . . . . . . 2-130 00-116-1631 . . . . . . . 2-4 00-124-3042 . . . . . . . 2-166 00-141-7320 . . . . . . . 2-26
00-098-4757 . . . . . . . 2-36 00-116-7790 . . . . . . . 2-43 00-125-8116 . . . . . . . 2-101 00-141-7838 . . . . . . . 2-181
00-102-9621 . . . . . . . 2-170 00-116-9230 . . . . . . . 2-150 00-126-5149 . . . . . . . 2-48 00-141-7842 . . . . . . . 2-181
00-103-0727 . . . . . . . 2-83 00-117-4737 . . . . . . . 2-41 00-126-5151 . . . . . . . 2-48 00-141-7957 . . . . . . . 2-89
00-103-2254 . . . . . . . 2-184 00-117-4813 . . . . . . . 2-94 00-126-5753 . . . . . . . 2-55 00-141-9705 . . . . . . . 2-71
00-103-2945 . . . . . . . 2-136 00-117-6010 . . . . . . . 2-86 00-126-8426 . . . . . . . 2-104 00-142-0384 . . . . . . . 2-175
00-103-2976 . . . . . . . 2-137 00-117-6516 . . . . . . . 2-86 00-127-3439 . . . . . . . 2-39 00-142-1775 . . . . . . . 2-167
00-104-5060 . . . . . . . 2-137 00-117-6815 . . . . . . . 2-86 00-127-7955 . . . . . . . 2-7 00-142-2684 . . . . . . . 2-166
00-105-3236 . . . . . . . 2-106 00-117-6826 . . . . . . . 2-86 00-128-4005 . . . . . . . 2-179 00-142-6194 . . . . . . . 2-183
00-105-3297 . . . . . . . 2-52 00-117-6828 . . . . . . . 2-86 00-128-4475 . . . . . . . 2-179 00-143-0256 . . . . . . . 2-77
00-105-3945 . . . . . . . 2-66 00-117-6830 . . . . . . . 2-86 00-128-4751 . . . . . . . 2-179 00-143-1765 . . . . . . . 2-41
00-105-4168 . . . . . . . 2-104 00-117-6833 . . . . . . . 2-86 00-128-4981 . . . . . . . 2-179 00-143-3351 . . . . . . . 2-48
00-106-3151 . . . . . . . 2-174 00-117-6837 . . . . . . . 2-86 00-128-5059 . . . . . . . 2-179 00-143-6020 . . . . . . . 2-55
2-190
Page Page Page Page

00-143-6079 . . . . . . . 2-86 00-150-9528 ....... 2-42 00-151-5915 . . . . . . . 2-97 00-165-1935 . . . . . . . 2-121
00-143-6275 . . . . . . . 2-73 00-150-9990 ....... 2-42 00-151-6234 . . . . . . . 2-39 00-165-1936 . . . . . . . 2-121
00-143-6823 . . . . . . . 2-118 00-151-0277 ....... 2-39 00-151-7378 . . . . . . . 2-93 00-165-1937 . . . . . . . 2-121
00-143-6875 . . . . . . . 2-118 00-151-0330 ....... 2-39 00-151-7974 . . . . . . . 2-25 00-165-1938 . . . . . . . 2-121
00-143-7054 . . . . . . . 2-104 00-151-0524 ....... 2-39 00-151-8817 . . . . . . . 2-66 00-165-1940 . . . . . . . 2-121
00-143-7932 . . . . . . . 2-118 00-151-0777 ....... 2-41 00-151-8930 . . . . . . . 2-66 00-165-1941 . . . . . . . 2-121
00-143-8695 . . . . . . . 2-118 00-151-0778 ....... 2-41 00-151-9074 . . . . . . . 2-60 00-165-1942 . . . . . . . 2-121
00-143-9768 . . . . . . . 2-18 00-151-0779 ....... 2-41 00-151-9653 . . . . . . . 2-76 00-165-1943 . . . . . . . 2-121
00-144-0364 . . . . . . . 2-20 00-151-0780 ....... 2-41 00-152-0457 . . . . . . . 2-137 00-165-1944 . . . . . . . 2-121
00-144-3646 . . . . . . . 2-42 00-151-0781 ....... 2-41 00-154-3110 . . . . . . . 2-130 00-165-1946 . . . . . . . 2-121
00-144-3648 . . . . . . . 2-42 00-151-0782 ....... 2-41 00-154-8358 . . . . . . . 2-130 00-165-1947 . . . . . . . 2-121
00-144-3706 . . . . . . . 2-42 00-151-0784 ....... 2-41 00-154-9075 . . . . . . . 2-130 00-165-1948 . . . . . . . 2-121
00-144-3852 . . . . . . . 2-39 00-151-0785 ....... 2-41 00-156-2327 . . . . . . . 2-42 00-165-1949 . . . . . . . 2-121
00-144-4004 . . . . . . . 2-42 00-151-1135 ....... 2-42 00-156-2336 . . . . . . . 2-42 00-165-1950 . . . . . . . 2-121
00-144-4048 . . . . . . . 2-39 00-151-1180 ....... 2-39 00-156-2337 . . . . . . . 2-42 00-165-1951 . . . . . . . 2-121
00-144-4051 . . . . . . . 2-39 00-151-1410 ....... 2-41 00-156-2338 . . . . . . . 2-42 00-165-1952 . . . . . . . 2-121
00-144-6546 . . . . . . . 2-48 00-151-1411 ....... 2-41 00-156-2339 . . . . . . . 2-43 00-165-1953 . . . . . . . 2-121
00-144-7310 . . . . . . . 2-142 00-151-1412 ....... 2-41 00-156-2341 . . . . . . . 2-43 00-165-1954 . . . . . . . 2-121
00-144-7311 . . . . . . . 2-142 00-151-1413 ....... 2-41 00-156-2347 . . . . . . . 2-43 00-165-1955 . . . . . . . 2-121
00-145-0776 . . . . . . . 2-30 00-151-1415 ....... 2-41 00-156-2348 . . . . . . . 2-43 00-165-1956 . . . . . . . 2-121
00-145-0875 . . . . . . . 2-49 00-151-1416 ....... 2-41 00-156-2699 . . . . . . . 2-39 00-165-1957 . . . . . . . 2-121
00-145-0904 . . . . . . . 2-22 00-151-1417 ....... 2-41 00-156-2703 . . . . . . . 2-39 00-165-1958 . . . . . . . 2-121
00-145-0934 . . . . . . . 2-42 00-151-1418 ....... 2-41 00-156-2753 . . . . . . . 2-39 00-165-1959 . . . . . . . 2-121
00-145-1064 . . . . . . . 2-20 00-151-1419 ....... 2-41 00-157-5632 . . . . . . . 2-33 00-165-1960 . . . . . . . 2-121
00-145-7011 . . . . . . . 2-20 00-151-1420 ....... 2-41 00-157-5667 . . . . . . . 2-94 00-165-1961 . . . . . . . 2-121
00-145-7016 . . . . . . . 2-20 00-151-1421 ....... 2-41 00-158-0754 . . . . . . . 2-16 00-165-1962 . . . . . . . 2-121
00-145-7017 . . . . . . . 2-20 00-151-1422 ....... 2-41 00-158-0758 . . . . . . . 2-16 00-165-1963 . . . . . . . 2-121
00-146-2670 . . . . . . . 2-119 00-151-1423 ....... 2-41 00-158-3805 . . . . . . . 2-143 00-165-1964 . . . . . . . 2-121
00-146-7074 . . . . . . . 2-65 00-151-1424 ....... 2-41 00-158-3807 . . . . . . . 2-143 00-165-1965 . . . . . . . 2-121
00-147-3238 . . . . . . . 2-32 00-151-1426 ....... 2-41 00-159-3901 . . . . . . . 2-168 00-165-1966 . . . . . . . 2-121
00-147-3248 . . . . . . . 2-32 00-151-1427 ....... 2-41 00-159-3904 . . . . . . . 2-168 00-165-1967 . . . . . . . 2-121
00-147-6526 . . . . . . . 2-65 00-151-1452 ....... 2-42 00-159-6339 . . . . . . . 2-58 00-165-1968 . . . . . . . 2-121
00-148-4719 . . . . . . . 2-68 00-151-1454 ....... 2-42 00-159-9152 . . . . . . . 2-121 00-165-1969 . . . . . . . 2-121
00-149-1835 . . . . . . . 2-46 00-151-1461 ....... 2-42 00-160-5910 . . . . . . . 2-153 00-165-1970 . . . . . . . 2-121
00-149-9116 . . . . . . . 2-70 00-151-1942 ....... 2-43 00-161-8830 . . . . . . . 2-74 00-165-1971 . . . . . . . 2-122
00-149-9119 . . . . . . . 2-70 00-151-1962 ....... 2-39 00-161-8831 . . . . . . . 2-74 00-165-1972 . . . . . . . 2-122
00-149-9130 . . . . . . . 2-66 00-151-1963 ....... 2-39 00-161-8832 . . . . . . . 2-74 00-165-1974 . . . . . . . 2-122
00-149-9143 . . . . . . . 2-66 00-151-1964 ....... 2-39 00-161-8834 . . . . . . . 2-74 00-165-1975 . . . . . . . 2-122
00-149-9146 . . . . . . . 2-70 00-151-1965 ....... 2-39 00-161-8835 . . . . . . . 2-74 00-165-1976 . . . . . . . 2-122
00-149-9688 . . . . . . . 2-46 00-151-1969 ....... 2-39 00-161-8837 . . . . . . . 2-74 00-165-1977 . . . . . . . 2-122
00-150-2920 . . . . . . . 2-9 00-151-1970 ....... 2-39 00-161-9043 . . . . . . . 2-152 00-165-1978 . . . . . . . 2-122
00-150-3009 . . . . . . . 2-77 00-151-1972 ....... 2-39 00-161-9044 . . . . . . . 2-152 00-165-1979 . . . . . . . 2-122
00-150-4092 . . . . . . . 2-84 00-151-2322 ....... 2-39 00-161-9066 . . . . . . . 2-151 00-165-1980 . . . . . . . 2-123
00-150-4154 . . . . . . . 2-59 00-151-2341 ....... 2-24 00-161-9695 . . . . . . . 2-150 00-165-1981 . . . . . . . 2-123
00-150-9105 . . . . . . . 2-41 00-151-2626 ....... 2-42 00-161-9715 . . . . . . . 2-151 00-165-2083 . . . . . . . 2-84
00-150-9208 . . . . . . . 2-20 00-151-2797 ....... 2-43 00-163-1930 . . . . . . . 2-34 00-165-2084 . . . . . . . 2-84
00-150-9211 . . . . . . . 2-20 00-151-3015 ....... 2-42 00-163-6566 . . . . . . . 2-125 00-165-4565 . . . . . . . 2-122
00-150-9212 . . . . . . . 2-20 00-151-5431 ....... 2-59 00-163-6805 . . . . . . . 2-46 00-165-7671 . . . . . . . 2-137
00-150-9213 . . . . . . . 2-20 00-151-5516 ....... 2-84 00-163-8028 . . . . . . . 2-184 00-165-7806 . . . . . . . 2-173
00-150-9221 . . . . . . . 2-41 00-151-5520 ....... 2-84 00-163-8029 . . . . . . . 2-184 00-165-8074 . . . . . . . 2-13
00-150-9515 . . . . . . . 2-20 00-151-5910 ....... 2-99 00-164-5121 . . . . . . . 2-74 00-166-0959 . . . . . . . 2-120
00-150-9517 . . . . . . . 2-20 00-151-5912 ....... 2-98 00-164-5126 . . . . . . . 2-74 00-166-0963 . . . . . . . 2-120
00-150-9527 . . . . . . . 2-42 00-151-5914 ....... 2-98 00-164-8319 . . . . . . . 2-18 00-166-0966 . . . . . . . 2-120
2-191
Page Page Page Page

00-166-0967 . . . . . . . 2-120 00-166-1099 . . . . . . . 2-123 00-167-0821 . . . . . . . 2-65 00-167-5120 . . . . . . . 2-120
00-166-0968 . . . . . . . 2-120 00-166-1100 . . . . . . . 2-123 00-167-0822 . . . . . . . 2-65 00-167-5121 . . . . . . . 2-120
00-166-0969 . . . . . . . 2-120 00-166-1101 . . . . . . . 2-123 00-167-0823 . . . . . . . 2-65 00-167-5122 . . . . . . . 2-120
00-166-0975 . . . . . . . 2-120 00-166-1104 . . . . . . . 2-123 00-167-0824 . . . . . . . 2-65 00-167-5123 . . . . . . . 2-120
00-166-0980 . . . . . . . 2-120 00-166-1109 . . . . . . . 2-123 00-167-0825 . . . . . . . 2-65 00-167-5124 . . . . . . . 2-120
00-166-0988 . . . . . . . 2-120 00-166-1110 . . . . . . . 2-123 00-167-0826 . . . . . . . 2-65 00-167-5125 . . . . . . . 2-120
00-166-0990 . . . . . . . 2-120 00-166-1111 . . . . . . . 2-123 00-167-0827 . . . . . . . 2-65 00-167-5126 . . . . . . . 2-120
00-166-0991 . . . . . . . 2-120 00-166-1112 . . . . . . . 2-123 00-167-0828 . . . . . . . 2-65 00-167-5127 . . . . . . . 2-120
00-166-0992 . . . . . . . 2-120 00-166-8390 . . . . . . . 2-120 00-167-0831 . . . . . . . 2-65 00-167-5128 . . . . . . . 2-120
00-166-0993 . . . . . . . 2-120 00-166-8391 . . . . . . . 2-120 00-167-0832 . . . . . . . 2-65 00-167-5129 . . . . . . . 2-120
00-166-0994 . . . . . . . 2-120 00-166-8392 . . . . . . . 2-120 00-167-0833 . . . . . . . 2-65 00-167-5135 . . . . . . . 2-120
00-166-0996 . . . . . . . 2-120 00-166-8394 . . . . . . . 2-120 00-167-0834 . . . . . . . 2-65 00-167-5136 . . . . . . . 2-120
00-166-1001 . . . . . . . 2-120 00-166-8395 . . . . . . . 2-120 00-167-0835 . . . . . . . 2-65 00-167-5137 . . . . . . . 2-120
00-166-1010 . . . . . . . 2-120 00-166-8396 . . . . . . . 2-120 00-167-0836 . . . . . . . 2-65 00-167-5138 . . . . . . . 2-120
00-166-1011 . . . . . . . 2-120 00-166-8397 . . . . . . . 2-120 00-167-0837 . . . . . . . 2-65 00-167-5139 . . . . . . . 2-120
00-166-1017 . . . . . . . 2-120 00-166-8398 . . . . . . . 2-120 00-167-0838 . . . . . . . 2-65 00-167-5140 . . . . . . . 2-121
00-166-1020 . . . . . . . 2-120 00-166-8399 . . . . . . . 2-120 00-167-0839 . . . . . . . 2-65 00-167-5141 . . . . . . . 2-121
00-166-1022 . . . . . . . 2-120 00-166-8400 . . . . . . . 2-120 00-167-0841 . . . . . . . 2-65 00-167-5142 . . . . . . . 2-121
00-166-1025 . . . . . . . 2-120 00-166-8401 . . . . . . . 2-120 00-167-0842 . . . . . . . 2-65 00-167-5143 . . . . . . . 2-121
00-166-1030 . . . . . . . 2-120 00-166-8402 . . . . . . . 2-121 00-167-1279 . . . . . . . 2-55 00-167-5144 . . . . . . . 2-121
00-166-1036 . . . . . . . 2-120 00-166-8403 . . . . . . . 2-121 00-167-1280 . . . . . . . 2-55 00-167-5145 . . . . . . . 2-121
00-166-1041 . . . . . . . 2-120 00-166-8404 . . . . . . . 2-121 00-167-1281 . . . . . . . 2-55 00-167-5146 . . . . . . . 2-121
00-166-1046 . . . . . . . 2-120 00-166-8405 . . . . . . . 2-121 00-167-1284 . . . . . . . 2-55 00-167-5147 . . . . . . . 2-121
00-166-1049 . . . . . . . 2-120 00-166-8406 . . . . . . . 2-121 00-167-1285 . . . . . . . 2-55 00-167-5148 . . . . . . . 2-121
00-166-1055 . . . . . . . 2-120 00-166-8411 . . . . . . . 2-121 00-167-1286 . . . . . . . 2-55 00-167-5149 . . . . . . . 2-121
00-166-1058 . . . . . . . 2-120 00-166-8412 . . . . . . . 2-121 00-167-1288 . . . . . . . 2-55 00-167-5150 . . . . . . . 2-121
00-166-1059 . . . . . . . 2-120 00-166-8415 . . . . . . . 2-121 00-167-1289 . . . . . . . 2-55 00-167-5151 . . . . . . . 2-121
00-166-1060 . . . . . . . 2-120 00-166-8422 . . . . . . . 2-121 00-167-1290 . . . . . . . 2-55 00-167-5152 . . . . . . . 2-121
00-166-1062 . . . . . . . 2-120 00-166-8428 . . . . . . . 2-121 00-167-1292 . . . . . . . 2-55 00-167-5153 . . . . . . . 2-121
00-166-1063 . . . . . . . 2-120 00-167-0680 . . . . . . . 2-69 00-167-1294 . . . . . . . 2-55 00-167-5154 . . . . . . . 2-121
00-166-1066 . . . . . . . 2-120 00-167-0702 . . . . . . . 2-65 00-167-1300 . . . . . . . 2-57 00-167-5155 . . . . . . . 2-121
00-166-1068 . . . . . . . 2-120 00-167-0706 . . . . . . . 2-65 00-167-1302 . . . . . . . 2-57 00-167-5156 . . . . . . . 2-121
00-166-1071 . . . . . . . 2-120 00-167-0721 . . . . . . . 2-69 00-167-1304 . . . . . . . 2-57 00-167-5157 . . . . . . . 2-121
00-166-1072 . . . . . . . 2-120 00-167-0738 . . . . . . . 2-65 00-167-1320 . . . . . . . 2-56 00-167-5158 . . . . . . . 2-121
00-166-1074 . . . . . . . 2-120 00-167-0739 . . . . . . . 2-65 00-167-1342 . . . . . . . 2-56 00-167-5159 . . . . . . . 2-121
00-166-1076 . . . . . . . 2-120 00-167-0740 . . . . . . . 2-65 00-167-1343 . . . . . . . 2-56 00-167-5160 . . . . . . . 2-121
00-166-1077 . . . . . . . 2-123 00-167-0752 . . . . . . . 2-64 00-167-1344 . . . . . . . 2-56 00-167-5162 . . . . . . . 2-122
00-166-1078 . . . . . . . 2-123 00-167-0754 . . . . . . . 2-64 00-167-1345 . . . . . . . 2-56 00-167-5163 . . . . . . . 2-122
00-166-1079 . . . . . . . 2-123 00-167-0765 . . . . . . . 2-67 00-167-1346 . . . . . . . 2-56 00-167-5164 . . . . . . . 2-122
00-166-1081 . . . . . . . 2-123 00-167-0766 . . . . . . . 2-67 00-167-1724 . . . . . . . 2-65 00-167-5165 . . . . . . . 2-122
00-166-1084 . . . . . . . 2-123 00-167-0797 . . . . . . . 2-65 00-167-1726 . . . . . . . 2-65 00-167-5166 . . . . . . . 2-122
00-166-1085 . . . . . . . 2-123 00-167-0801 . . . . . . . 2-65 00-167-3708 . . . . . . . 2-42 00-167-5167 . . . . . . . 2-123
00-166-1086 . . . . . . . 2-123 00-167-0803 . . . . . . . 2-65 00-167-4943 . . . . . . . 2-84 00-167-5168 . . . . . . . 2-123
00-166-1087 . . . . . . . 2-123 00-167-0804 . . . . . . . 2-65 00-167-5110 . . . . . . . 2-120 00-167-5170 . . . . . . . 2-123
00-166-1088 . . . . . . . 2-123 00-167-0805 . . . . . . . 2-65 00-167-5111 . . . . . . . 2-120 00-167-5171 . . . . . . . 2-123
00-166-1089 . . . . . . . 2-123 00-167-0806 . . . . . . . 2-65 00-167-5112 . . . . . . . 2-120 00-167-5172 . . . . . . . 2-123
00-166-1090 . . . . . . . 2-123 00-167-0808 . . . . . . . 2-65 00-167-5113 . . . . . . . 2-120 00-167-5173 . . . . . . . 2-123
00-166-1091 . . . . . . . 2-123 00-167-0809 . . . . . . . 2-65 00-167-5114 . . . . . . . 2-120 00-167-5174 . . . . . . . 2-123
00-166-1092 . . . . . . . 2-123 00-167-0812 . . . . . . . 2-65 00-167-5115 . . . . . . . 2-120 00-167-5175 . . . . . . . 2-123
00-166-1094 . . . . . . . 2-123 00-167-0814 . . . . . . . 2-65 00-167-5116 . . . . . . . 2-120 00-167-5176 . . . . . . . 2-123
00-166-1095 . . . . . . . 2-123 00-167-0816 . . . . . . . 2-65 00-167-5117 . . . . . . . 2-120 00-168-2984 . . . . . . . 2-25
00-166-1097 . . . . . . . 2-123 00-167-0818 . . . . . . . 2-65 00-167-5118 . . . . . . . 2-120 00-168-6593 . . . . . . . 2-168
00-166-1098 . . . . . . . 2-123 00-167-0820 . . . . . . . 2-65 00-167-5119 . . . . . . . 2-120 00-169-7988 . . . . . . . 2-77
2-192
Page Page Page Page

00-170-1606 . . . . . . . 2-18 00-171-5899 . . . . . . . 2-128 00-171-9898 . . . . . . . 2-174 00-174-4108 . . . . . . . 2-39
00-170-3039 . . . . . . . 2-86 00-171-5901 . . . . . . . 2-127 00-171-9974 . . . . . . . 2-101 00-174-4355 . . . . . . . 2-52
00-171-2436 . . . . . . . 2-135 00-171-5902 . . . . . . . 2-127 00-172-4210 . . . . . . . 2-95 00-174-4764 . . . . . . . 2-52
00-171-2651 . . . . . . . 2-62 00-171-5903 . . . . . . . 2-127 00-172-7187 . . . . . . . 2-120 00-174-5315 . . . . . . . 2-91
00-171-2693 . . . . . . . 2-85 00-171-5904 . . . . . . . 2-127 00-172-7188 . . . . . . . 2-120 00-174-5317 . . . . . . . 2-91
00-171-4238 . . . . . . . 2-91 00-171-5905 . . . . . . . 2-127 00-172-7189 . . . . . . . 2-123 00-174-8562 . . . . . . . 2-41
00-171-4365 . . . . . . . 2-93 00-171-5908 . . . . . . . 2-127 00-173-3022 . . . . . . . 2-121 00-174-8563 . . . . . . . 2-41
00-171-5042 . . . . . . . 2-127 00-171-5909 . . . . . . . 2-128 00-173-3023 . . . . . . . 2-121 00-174-9458 . . . . . . . 2-44
00-171-5043 . . . . . . . 2-128 00-171-5910 . . . . . . . 2-128 00-173-3025 . . . . . . . 2-122 00-174-9461 . . . . . . . 2-44
00-171-5044 . . . . . . . 2-127 00-171-5911 . . . . . . . 2-128 00-173-6591 . . . . . . . 2-183 00-174-9462 . . . . . . . 2-44
00-171-5046 . . . . . . . 2-128 00-171-5913 . . . . . . . 2-128 00-173-7584 . . . . . . . 2-60 00-174-9463 . . . . . . . 2-44
00-171-5047 . . . . . . . 2-127 00-171-5914 . . . . . . . 2-128 00-173-7617 . . . . . . . 2-49 00-174-9465 . . . . . . . 2-44
00-171-5048 . . . . . . . 2-127 00-171-6332 . . . . . . . 2-175 00-174-0446 . . . . . . . 2-150 00-174-9466 . . . . . . . 2-44
00-171-5049 . . . . . . . 2-128 00-171-6411 . . . . . . . 2-118 00-174-0532 . . . . . . . 2-44 00-174-9468 . . . . . . . 2-44
00-171-5050 . . . . . . . 2-127 00-171-6693 . . . . . . . 2-128 00-174-0986 . . . . . . . 2-151 00-174-9470 . . . . . . . 2-44
00-171-5051 . . . . . . . 2-128 00-171-6694 . . . . . . . 2-128 00-174-0995 . . . . . . . 2-151 00-174-9472 . . . . . . . 2-44
00-171-5052 . . . . . . . 2-127 00-171-6695 . . . . . . . 2-127 00-174-0997 . . . . . . . 2-151 00-174-9473 . . . . . . . 2-44
00-171-5053 . . . . . . . 2-127 00-171-6746 . . . . . . . 2-127 00-174-1000 . . . . . . . 2-151 00-174-9479 . . . . . . . 2-44
00-171-5062 . . . . . . . 2-127 00-171-6747 . . . . . . . 2-127 00-174-1001 . . . . . . . 2-151 00-174-9481 . . . . . . . 2-44
00-171-5063 . . . . . . . 2-127 00-171-6748 . . . . . . . 2-127 00-174-1937 . . . . . . . 2-50 00-174-9497 . . . . . . . 2-44
00-171-5064 . . . . . . . 2-127 00-171-6749 . . . . . . . 2-127 00-174-2923 . . . . . . . 2-97 00-174-9501 . . . . . . . 2-44
00-171-5065 . . . . . . . 2-127 00-171-6751 . . . . . . . 2-127 00-174-3231 . . . . . . . 2-9 00-174-9505 . . . . . . . 2-44
00-171-5066 . . . . . . . 2-127 00-171-6753 . . . . . . . 2-128 00-174-4007 . . . . . . . 2-12 00-174-9526 . . . . . . . 2-44
00-171-5067 . . . . . . . 2-127 00-171-6754 . . . . . . . 2-127 00-174-4008 . . . . . . . 2-12 00-174-9530 . . . . . . . 2-44
00-171-5068 . . . . . . . 2-128 00-171-6755 . . . . . . . 2-127 00-174-4009 . . . . . . . 2-12 00-174-9532 . . . . . . . 2-44
00-171-5069 . . . . . . . 2-127 00-171-6756 . . . . . . . 2-128 00-174-4010 . . . . . . . 2-12 00-174-9533 . . . . . . . 2-44
00-171-5070 . . . . . . . 2-127 00-171-6757 . . . . . . . 2-127 00-174-4011 . . . . . . . 2-12 00-174-9535 . . . . . . . 2-44
00-171-5071 . . . . . . . 2-127 00-171-6758 . . . . . . . 2-127 00-174-4012 . . . . . . . 2-12 00-174-9731 . . . . . . . 2-43
00-171-5072 . . . . . . . 2-128 00-171-6759 . . . . . . . 2-128 00-174-4013 . . . . . . . 2-12 00-174-9732 . . . . . . . 2-43
00-171-5073 . . . . . . . 2-127 00-171-6760 . . . . . . . 2-127 00-174-4015 . . . . . . . 2-12 00-174-9743 . . . . . . . 2-43
00-171-5074 . . . . . . . 2-127 00-171-6761 . . . . . . . 2-128 00-174-4028 . . . . . . . 2-13 00-174-9744 . . . . . . . 2-43
00-171-5075 . . . . . . . 2-127 00-171-6762 . . . . . . . 2-127 00-174-4029 . . . . . . . 2-13 00-174-9761 . . . . . . . 2-43
00-171-5095 . . . . . . . 2-128 00-171-6763 . . . . . . . 2-127 00-174-4030 . . . . . . . 2-13 00-174-9766 . . . . . . . 2-43
00-171-5097 . . . . . . . 2-127 00-171-6764 . . . . . . . 2-127 00-174-4031 . . . . . . . 2-13 00-174-9885 . . . . . . . 2-170
00-171-5098 . . . . . . . 2-127 00-171-6765 . . . . . . . 2-127 00-174-4032 . . . . . . . 2-13 00-175-3230 . . . . . . . 2-19
00-171-5099 . . . . . . . 2-128 00-171-6767 . . . . . . . 2-127 00-174-4033 . . . . . . . 2-13 00-176-6281 . . . . . . . 2-84
00-171-5100 . . . . . . . 2-128 00-171-6768 . . . . . . . 2-127 00-174-4034 . . . . . . . 2-13 00-176-6333 . . . . . . . 2-62
00-171-5102 . . . . . . . 2-127 00-171-6770 . . . . . . . 2-127 00-174-4035 . . . . . . . 2-13 00-176-6341 . . . . . . . 2-61
00-171-5752 . . . . . . . 2-127 00-171-6856 . . . . . . . 2-110 00-174-4037 . . . . . . . 2-13 00-176-8108 . . . . . . . 2-59
00-171-5778 . . . . . . . 2-127 00-171-6857 . . . . . . . 2-110 00-174-4040 . . . . . . . 2-13 00-176-8109 . . . . . . . 2-59
00-171-5779 . . . . . . . 2-128 00-171-6886 . . . . . . . 2-174 00-174-4041 . . . . . . . 2-13 00-176-8110 . . . . . . . 2-59
00-171-5789 . . . . . . . 2-95 00-171-7274 . . . . . . . 2-114 00-174-4042 . . . . . . . 2-13 00-176-8111 . . . . . . . 2-59
00-171-5885 . . . . . . . 2-127 00-171-7346 . . . . . . . 2-127 00-174-4043 . . . . . . . 2-13 00-176-8112 . . . . . . . 2-59
00-171-5886 . . . . . . . 2-128 00-171-7426 . . . . . . . 2-119 00-174-4045 . . . . . . . 2-13 00-176-8113 . . . . . . . 2-59
00-171-5887 . . . . . . . 2-128 00-171-7429 . . . . . . . 2-119 00-174-4047 . . . . . . . 2-13 00-176-8114 . . . . . . . 2-59
00-171-5889 . . . . . . . 2-127 00-171-8069 . . . . . . . 2-119 00-174-4053 . . . . . . . 2-13 00-176-8115 . . . . . . . 2-59
00-171-5890 . . . . . . . 2-127 00-171-8363 . . . . . . . 2-125 00-174-4054 . . . . . . . 2-13 00-176-8116 . . . . . . . 2-59
00-171-5891 . . . . . . . 2-128 00-171-8631 . . . . . . . 2-91 00-174-4055 . . . . . . . 2-13 00-176-8117 . . . . . . . 2-59
00-171-5892 . . . . . . . 2-128 00-171-9220 . . . . . . . 2-128 00-174-4056 . . . . . . . 2-13 00-177-1133 . . . . . . . 2-59
00-171-5893 . . . . . . . 2-128 00-171-9222 . . . . . . . 2-128 00-174-4057 . . . . . . . 2-13 00-177-3754 . . . . . . . 2-167
00-171-5894 . . . . . . . 2-127 00-171-9223 . . . . . . . 2-128 00-174-4058 . . . . . . . 2-13 00-177-3940 . . . . . . . 2-173
00-171-5897 . . . . . . . 2-127 00-171-9225 . . . . . . . 2-127 00-174-4059 . . . . . . . 2-13 00-177-4110 . . . . . . . 2-77
00-171-5898 . . . . . . . 2-127 00-171-9368 . . . . . . . 2-129 00-174-4091 . . . . . . . 2-41 00-177-4191 . . . . . . . 2-7
2-193
Page Page Page Page

00-177-5428 . . . . . . . 2-20 00-182-1950 . . . . . . . 2-43 00-184-9858 . . . . . . . 2-91 00-187-2405 . . . . . . . 2-65
00-177-5622 . . . . . . . 2-20 00-182-1951 . . . . . . . 2-43 00-185-0001 . . . . . . . 2-91 00-187-2406 . . . . . . . 2-65
00-177-5688 . . . . . . . 2-22 . . . . . . . 2-43 00-185-0017 . . . . . . . 2-91 00-187-2425 . . . . . . . 2-69
00-178-3782 . . . . . . . 2-130 00-182-1958 . . . . . . . 2-42 00-185-0018 . . . . . . . 2-91 00-187-2426 . . . . . . . 2-69
00-178-3879 . . . . . . . 2-130 00-182-2014 . . . . . . . 2-42 00-185-0037 . . . . . . . 2-75 00-187-2427 . . . . . . . 2-69
00-178-4679 . . . . . . . 2-130 00-182-2015 . . . . . . . 2-42 00-185-6343 . . . . . . . 2-58 00-187-2428 . . . . . . . 2-69
00-178-8631 . . . . . . . 2-69 00-182-2016 . . . . . . . 2-42 00-185-6345 . . . . . . . 2-58 00-187-2429 . . . . . . . 2-69
00-178-9791 . . . . . . . 2-101 00-182-2017 . . . . . . . 2-42 00-185-6346 . . . . . . . 2-58 00-187-2430 . . . . . . . 2-69
00-178-9792 . . . . . . . 2-101 00-182-2023 . . . . . . . 2-42 00-185-6389 . . . . . . . 2-58 00-187-2431 . . . . . . . 2-69
00-178-9793 . . . . . . . 2-101 00-182-2024 . . . . . . . 2-42 00-185-6425 . . . . . . . 2-58 00-187-2432 . . . . . . . 2-69
00-178-9794 . . . . . . . 2-101 00-182-2025 . . . . . . . 2-42 00-185-6426 . . . . . . . 2-58 00-187-3241 . . . . . . . 2-81
00-178-9795 . . . . . . . 2-101 00-182-2026 . . . . . . . 2-42 00-185-6460 . . . . . . . 2-58 00-187-3243 . . . . . . . 2-81
00-178-9796 . . . . . . . 2-101 00-182-2027 . . . . . . . 2-42 00-185-6461 . . . . . . . 2-58 00-187-3433 . . . . . . . 2-149
00-179-0050 . . . . . . . 2-129 00-182-2028 . . . . . . . 2-42 00-185-6462 . . . . . . . 2-58 00-187-3682 . . . . . . . 2-66
00-179-0051 . . . . . . . 2-129 00-182-2052 . . . . . . . 2-43 00-185-6463 . . . . . . . 2-58 00-187-4129 . . . . . . . 2-67
00-179-0052 . . . . . . . 2-129 . . . . . . . 2-43 00-185-6464 . . . . . . . 2-58 00-187-6268 . . . . . . . 2-151
00-179-0053 . . . . . . . 2-129 00-182-2056 . . . . . . . 2-42 00-185-6484 . . . . . . . 2-58 00-187-6269 . . . . . . . 2-151
00-179-0054 . . . . . . . 2-129 00-182-2057 . . . . . . . 2-42 00-185-7261 . . . . . . . 2-149 00-187-6270 . . . . . . . 2-151
00-179-0952 . . . . . . . 2-130 00-182-2058 . . . . . . . 2-42 00-186-0960 . . . . . . . 2-68 00-187-6271 . . . . . . . 2-151
00-179-1430 . . . . . . . 2-130 00-182-3115 . . . . . . . 2-118 00-186-0961 . . . . . . . 2-68 00-187-6272 . . . . . . . 2-151
00-180-0009 . . . . . . . 2-23 00-182-4173 . . . . . . . 2-75 00-186-0962 . . . . . . . 2-68 00-187-6275 . . . . . . . 2-151
00-180-0011 . . . . . . . 2-23 00-182-4797 . . . . . . . 2-10 00-186-0964 . . . . . . . 2-68 00-187-6278 . . . . . . . 2-151
00-180-0013 . . . . . . . 2-23 00-182-5806 . . . . . . . 2-58 00-186-0966 . . . . . . . 2-68 00-187-6279 . . . . . . . 2-151
00-180-0014 . . . . . . . 2-23 00-182-7288 . . . . . . . 2-25 00-186-0967 . . . . . . . 2-68 00-187-6281 . . . . . . . 2-151
00-180-0082 . . . . . . . 2-44 00-182-7307 . . . . . . . 2-26 00-186-0969 . . . . . . . 2-68 00-187-6283 . . . . . . . 2-151
00-180-0238 . . . . . . . 2-42 00-182-7485 . . . . . . . 2-30 00-186-0970 . . . . . . . 2-68 00-187-6284 . . . . . . . 2-151
00-180-0261 . . . . . . . 2-42 00-182-9379 . . . . . . . 2-30 00-186-0971 . . . . . . . 2-68 00-187-6289 . . . . . . . 2-151
00-180-1442 . . . . . . . 2-42 00-182-9893 . . . . . . . 2-9 00-186-0972 . . . . . . . 2-68 00-187-6290 . . . . . . . 2-151
00-180-1475 . . . . . . . 2-23 00-183-4355 . . . . . . . 2-65 00-186-0974 . . . . . . . 2-68 00-187-6291 . . . . . . . 2-151
00-180-1483 . . . . . . . 2-42 00-183-4357 . . . . . . . 2-64 00-186-1032 . . . . . . . 2-68 00-187-6292 . . . . . . . 2-151
00-180-1485 . . . . . . . 2-42 00-183-4362 . . . . . . . 2-64 00-186-1303 . . . . . . . 2-67 00-187-6293 . . . . . . . 2-151
00-180-1739 . . . . . . . 2-39 00-183-4406 . . . . . . . 2-65 00-186-1469 . . . . . . . 2-104 00-187-6294 . . . . . . . 2-151
00-180-1995 . . . . . . . 2-33 00-183-8179 . . . . . . . 2-150 00-186-1745 . . . . . . . 2-117 00-187-6295 . . . . . . . 2-151
00-180-2705 . . . . . . . 2-41 00-184-1372 . . . . . . . 2-150 00-186-1747 . . . . . . . 2-117 00-187-7489 . . . . . . . 2-173
. . . . . . . 2-42 00-184-1374 . . . . . . . 2-150 00-186-1749 . . . . . . . 2-117 00-187-7508 . . . . . . . 2-174
00-180-2711 . . . . . . . 2-42 00-184-1656 . . . . . . . 2-27 00-186-8818 . . . . . . . 2-152 00-187-7535 . . . . . . . 2-174
00-180-2750 . . . . . . . 2-42 00-184-3472 . . . . . . . 2-122 00-186-8819 . . . . . . . 2-152 00-187-9370 . . . . . . . 2-75
00-180-2751 . . . . . . . 2-42 00-184-8458 . . . . . . . 2-101 00-186-8820 . . . . . . . 2-152 00-187-9373 . . . . . . . 2-75
00-180-2752 . . . . . . . 2-42 00-184-8966 . . . . . . . 2-65 00-186-8821 . . . . . . . 2-152 00-187-9375 . . . . . . . 2-75
00-180-2778 . . . . . . . 2-43 00-184-8970 . . . . . . . 2-69 00-186-8854 . . . . . . . 2-152 00-187-9377 . . . . . . . 2-75
00-180-2779 . . . . . . . 2-43 00-184-8971 . . . . . . . 2-69 00-186-8855 . . . . . . . 2-152 00-187-9386 . . . . . . . 2-75
00-180-3322 . . . . . . . 2-23 00-184-8973 . . . . . . . 2-65 00-186-8856 . . . . . . . 2-152 00-187-9390 . . . . . . . 2-75
00-180-4833 . . . . . . . 2-129 00-184-8974 . . . . . . . 2-65 00-186-9220 . . . . . . . 2-22 00-187-9430 . . . . . . . 2-75
00-180-4896 . . . . . . . 2-168 00-184-8977 . . . . . . . 2-69 00-187-1477 . . . . . . . 2-174 00-187-9431 . . . . . . . 2-75
00-180-9090 . . . . . . . 2-119 00-184-8979 . . . . . . . 2-64 00-187-1506 . . . . . . . 2-174 00-187-9432 . . . . . . . 2-75
00-180-9098 . . . . . . . 2-118 00-184-8980 . . . . . . . 2-64 00-187-1855 . . . . . . . 2-66 00-187-9439 . . . . . . . 2-75
00-181-0855 . . . . . . . 2-32 00-184-8985 . . . . . . . 2-64 00-187-2394 . . . . . . . 2-64 00-187-9443 . . . . . . . 2-75
00-181-6086 . . . . . . . 2-40 00-184-8986 . . . . . . . 2-64 00-187-2395 . . . . . . . 2-64 00-187-9446 . . . . . . . 2-75
00-182-1368 . . . . . . . 2-23 00-184-8987 . . . . . . . 2-64 00-187-2396 . . . . . . . 2-64 00-187-9447 . . . . . . . 2-75
00-182-1853 . . . . . . . 2-43 00-184-8996 . . . . . . . 2-69 00-187-2397 . . . . . . . 2-64 00-187-9448 . . . . . . . 2-75
00-182-1854 . . . . . . . 2-43 00-184-9001 . . . . . . . 2-64 00-187-2398 . . . . . . . 2-64 00-187-9460 . . . . . . . 2-75
00-182-1857 . . . . . . . 2-42 00-184-9002 . . . . . . . 2-64 00-187-2400 . . . . . . . 2-65 00-187-9506 . . . . . . . 2-75
00-182-1913 . . . . . . . 2-42 00-184-9121 . . . . . . . 2-67 00-187-2402 . . . . . . . 2-65 00-187-9745 . . . . . . . 2-78
2-194
Page Page Page Page

00-187-9934 . . . . . . . 2-16 00-193-8868 . . . . . . . 2-35 00-197-5309 . . . . . . . 2-173 00-200-3041 . . . . . . . 2-137
00-188-0044 . . . . . . . 2-74 00-193-9695 . . . . . . . 2-65 00-197-8426 . . . . . . . 2-174 00-200-3045 . . . . . . . 2-137
00-188-0047 . . . . . . . 2-74 00-193-9706 . . . . . . . 2-65 00-197-8490 . . . . . . . 2-117 00-200-3183 . . . . . . . 2-79
00-188-0049 . . . . . . . 2-74 00-193-9753 . . . . . . . 2-66 00-197-8493 . . . . . . . 2-117 00-200-3548 . . . . . . . 2-168
00-188-0177 . . . . . . . 2-81 00-193-9791 . . . . . . . 2-173 00-197-8494 . . . . . . . 2-117 00-200-3586 . . . . . . . 2-75
00-188-0194 . . . . . . . 2-81 00-193-9807 . . . . . . . 2-103 00-197-8495 . . . . . . . 2-117 00-200-4445 . . . . . . . 2-159
00-188-0214 . . . . . . . 2-81 00-193-9812 . . . . . . . 2-174 00-197-8497 . . . . . . . 2-117 00-200-4635 . . . . . . . 2-161
00-188-0328 . . . . . . . 2-146 00-193-9882 . . . . . . . 2-174 00-197-8498 . . . . . . . 2-117 00-200-4767 . . . . . . . 2-162
00-188-0330 . . . . . . . 2-147 00-194-0636 . . . . . . . 2-65 00-197-8505 . . . . . . . 2-117 00-200-5234 . . . . . . . 2-171
00-188-0331 . . . . . . . 2-147 00-194-0637 . . . . . . . 2-65 00-197-8524 . . . . . . . 2-117 00-200-5453 . . . . . . . 2-168
00-188-0332 . . . . . . . 2-147 00-194-0706 . . . . . . . 2-66 00-197-8527 . . . . . . . 2-117 00-200-5711 . . . . . . . 2-173
00-188-0333 . . . . . . . 2-147 00-194-0760 . . . . . . . 2-68 00-197-8535 . . . . . . . 2-117 00-200-5904 . . . . . . . 2-135
00-188-0336 . . . . . . . 2-147 00-194-0761 . . . . . . . 2-68 00-197-8981 . . . . . . . 2-118 00-200-7224 . . . . . . . 2-141
00-188-1613 . . . . . . . 2-84 00-194-0762 . . . . . . . 2-68 00-197-9650 . . . . . . . 2-117 00-200-7234 . . . . . . . 2-170
00-188-3291 . . . . . . . 2-174 00-194-0763 . . . . . . . 2-68 00-198-5085 . . . . . . . 2-73 00-200-7244 . . . . . . . 2-168
00-188-3300 . . . . . . . 2-174 00-194-0764 . . . . . . . 2-68 00-198-5336 . . . . . . . 2-73 00-200-7377 . . . . . . . 2-170
00-188-3744 . . . . . . . 2-65 00-194-0765 . . . . . . . 2-68 00-198-5602 . . . . . . . 2-74 00-200-7449 . . . . . . . 2-137
00-188-4716 . . . . . . . 2-73 00-194-0766 . . . . . . . 2-68 00-198-5606 . . . . . . . 2-74 00-200-7451 . . . . . . . 2-137
00-188-7723 . . . . . . . 2-64 00-194-0767 . . . . . . . 2-68 00-198-5616 . . . . . . . 2-74 00-200-8559 . . . . . . . 2-137
00-188-7888 . . . . . . . 2-56 00-194-0877 . . . . . . . 2-65 00-198-5617 . . . . . . . 2-74 00-200-8560 . . . . . . . 2-137
00-188-8343 . . . . . . . 2-174 00-194-0920 . . . . . . . 2-172 00-198-5618 . . . . . . . 2-74 00-200-8823 . . . . . . . 2-145
00-188-9145 . . . . . . . 2-73 00-194-0924 . . . . . . . 2-65 00-198-5974 . . . . . . . 2-81 00-200-8834 . . . . . . . 2-75
00-188-9166 . . . . . . . 2-73 00-194-0925 . . . . . . . 2-103 00-198-8040 . . . . . . . 2-150 00-200-9054 . . . . . . . 2-174
00-188-9207 . . . . . . . 2-73 00-194-1670 . . . . . . . 2-120 00-198-8046 . . . . . . . 2-150 00-200-9596 . . . . . . . 2-160
00-188-9358 . . . . . . . 2-73 00-194-1675 . . . . . . . 2-121 00-198-8048 . . . . . . . 2-150 00-200-9642 . . . . . . . 2-162
00-188-9396 . . . . . . . 2-73 00-194-2455 . . . . . . . 2-76 00-198-8050 . . . . . . . 2-150 00-201-0272 . . . . . . . 2-162
00-188-9654 . . . . . . . 2-172 00-194-2460 . . . . . . . 2-76 00-198-8056 . . . . . . . 2-150 00-201-1684 . . . . . . . 2-160
00-189-8467 . . . . . . . 2-57 00-194-4265 . . . . . . . 2-136 00-198-8057 . . . . . . . 2-150 00-201-1982 . . . . . . . 2-172
00-189-9518 . . . . . . . 2-5 00-194-6970 . . . . . . . 2-118 00-198-8058 . . . . . . . 2-150 00-201-1984 . . . . . . . 2-172
00-189-9538 . . . . . . . 2-4 00-194-7291 . . . . . . . 2-65 00-198-8060 . . . . . . . 2-150 00-201-2583 . . . . . . . 2-183
00-189-9890 . . . . . . . 2-95 00-194-7355 . . . . . . . 2-69 00-198-8198 . . . . . . . 2-161 00-201-2587 . . . . . . . 2-183
00-190-3339 . . . . . . . 2-9 00-194-8195 . . . . . . . 2-56 00-199-0014 . . . . . . . 2-102 00-201-2595 . . . . . . . 2-183
00-190-9978 . . . . . . . 2-116 00-194-9199 . . . . . . . 2-66 00-199-1028 . . . . . . . 2-58 00-201-2596 . . . . . . . 2-183
00-191-5679 . . . . . . . 2-115 00-195-2207 . . . . . . . 2-78 00-199-3114 . . . . . . . 2-57 00-201-2602 . . . . . . . 2-183
00-192-5047 . . . . . . . 2-151 00-195-2565 . . . . . . . 2-152 00-199-3118 . . . . . . . 2-58 00-201-2611 . . . . . . . 2-184
00-192-5049 . . . . . . . 2-151 00-195-4729 . . . . . . . 2-49 00-199-3119 . . . . . . . 2-57 00-201-2615 . . . . . . . 2-183
00-192-5050 . . . . . . . 2-151 00-195-4730 . . . . . . . 2-49 00-199-3120 . . . . . . . 2-57 00-202-2407 . . . . . . . 2-92
00-192-5051 . . . . . . . 2-151 00-195-4732 . . . . . . . 2-49 00-199-3144 . . . . . . . 2-57 00-202-2583 . . . . . . . 2-116
00-192-9316 . . . . . . . 2-151 00-195-4733 . . . . . . . 2-49 00-199-3155 . . . . . . . 2-56 00-202-2584 . . . . . . . 2-116
00-192-9339 . . . . . . . 2-149 00-195-4747 . . . . . . . 2-49 00-199-3405 . . . . . . . 2-73 00-202-2585 . . . . . . . 2-116
00-192-9341 . . . . . . . 2-149 00-196-1674 . . . . . . . 2-149 00-199-3473 . . . . . . . 2-73 00-202-2586 . . . . . . . 2-116
00-192-9345 . . . . . . . 2-149 00-196-1678 . . . . . . . 2-149 00-199-3476 . . . . . . . 2-73 00-202-2587 . . . . . . . 2-116
00-193-0095 . . . . . . . 2-136 00-196-1692 . . . . . . . 2-149 00-199-5937 . . . . . . . 2-173 00-202-2588 . . . . . . . 2-116
00-193-0120 . . . . . . . 2-136 00-196-1693 . . . . . . . 2-149 00-199-5955 . . . . . . . 2-173 00-202-2589 . . . . . . . 2-116
00-193-0783 . . . . . . . 2-135 00-196-1696 . . . . . . . 2-149 00-199-6001 . . . . . . . 2-173 00-202-2590 . . . . . . . 2-116
00-193-1340 . . . . . . . 2-152 00-196-1698 . . . . . . . 2-149 00-199-6027 . . . . . . . 2-173 00-202-2593 . . . . . . . 2-116
00-193-1341 . . . . . . . 2-152 00-196-1700 . . . . . . . 2-149 00-199-7639 . . . . . . . 2-55 00-202-2594 . . . . . . . 2-116
00-193-1348 . . . . . . . 2-152 00-196-6695 . . . . . . . 2-67 00-199-7643 . . . . . . . 2-55 00-202-2599 . . . . . . . 2-116
00-193-1349 . . . . . . . 2-152 00-196-6696 . . . . . . . 2-103 00-200-2355 . . . . . . . 2-160 00-202-2602 . . . . . . . 2-116
00-193-1356 . . . . . . . 2-151 00-197-4144 . . . . . . . 2-65 00-200-2550 . . . . . . . 2-172 00-202-2603 . . . . . . . 2-116
00-193-4280 . . . . . . . 2-49 00-197-4169 . . . . . . . 2-65 00-200-2595 . . . . . . . 2-168 00-202-3427 . . . . . . . 2-117
00-193-7211 . . . . . . . 2-152 00-197-4180 . . . . . . . 2-138 00-200-2637 . . . . . . . 2-170 00-202-3731 . . . . . . . 2-104
00-193-7227 . . . . . . . 2-152 00-197-5296 . . . . . . . 2-173 00-200-2639 . . . . . . . 2-168 00-202-4315 . . . . . . . 2-104
2-195
Page Page Page Page

00-203-0292 . . . . . . . 2-166 00-206-4674 . . . . . . . 2-36 00-208-6430 . . . . . . . 2-27 00-218-6374 . . . . . . . 2-161
00-203-7763 . . . . . . . 2-4 00-206-5401 . . . . . . . 2-21 00-208-6432 . . . . . . . 2-27 00-218-8835 . . . . . . . 2-94
00-203-9354 . . . . . . . 2-7 00-206-6376 . . . . . . . 2-48 00-208-6433 . . . . . . . 2-26 00-219-7314 . . . . . . . 2-153
00-204-1283 . . . . . . . 2-8 00-206-6402 . . . . . . . 2-48 00-208-6740 . . . . . . . 2-57 00-219-7321 . . . . . . . 2-154
00-205-3465 . . . . . . . 2-126 00-206-6786 . . . . . . . 2-14 00-208-6797 . . . . . . . 2-58 00-219-7354 . . . . . . . 2-87
00-205-4731 . . . . . . . 2-170 00-206-6931 . . . . . . . 2-26 00-208-7589 . . . . . . . 2-57 00-220-4711 . . . . . . . 2-178
00-205-5223 . . . . . . . 2-135 00-206-7626 . . . . . . . 2-51 00-208-8718 . . . . . . . 2-58 00-220-6078 . . . . . . . 2-177
00-205-5573 . . . . . . . 2-145 00-206-7632 . . . . . . . 2-51 00-208-9255 . . . . . . . 2-61 00-220-6080 . . . . . . . 2-177
00-205-5628 . . . . . . . 2-135 00-206-8544 . . . . . . . 2-46 00-209-0026 . . . . . . . 2-66 00-220-6082 . . . . . . . 2-177
00-205-6552 . . . . . . . 2-171 00-206-8750 . . . . . . . 2-11 00-209-0027 . . . . . . . 2-66 00-220-6084 . . . . . . . 2-177
00-205-6566 . . . . . . . 2-171 00-206-9572 . . . . . . . 2-42 00-209-0295 . . . . . . . 2-66 00-220-6086 . . . . . . . 2-177
00-205-6716 . . . . . . . 2-171 00-207-0895 . . . . . . . 2-16 00-209-0965 . . . . . . . 2-69 00-220-6146 . . . . . . . 2-178
00-205-7344 . . . . . . . 2-87 00-207-1399 . . . . . . . 2-34 00-209-1239 . . . . . . . 2-70 00-220-6148 . . . . . . . 2-178
00-205-7837 . . . . . . . 2-62 00-207-1406 . . . . . . . 2-33 00-209-1761 . . . . . . . 2-66 00-220-6154 . . . . . . . 2-178
00-205-7840 . . . . . . . 2-62 00-207-1786 . . . . . . . 2-21 00-209-2312 . . . . . . . 2-64 00-220-6178 . . . . . . . 2-178
00-205-7842 . . . . . . . 2-62 00-207-1788 . . . . . . . 2-21 00-209-3483 . . . . . . . 2-70 00-220-6194 . . . . . . . 2-178
00-205-7844 . . . . . . . 2-62 00-207-2793 . . . . . . . 2-21 00-209-3484 . . . . . . . 2-70 00-220-6196 . . . . . . . 2-178
00-205-8249 . . . . . . . 2-68 00-207-3741 . . . . . . . 2-25 00-209-3573 . . . . . . . 2-68 00-220-6198 . . . . . . . 2-178
00-205-8489 . . . . . . . 2-173 00-207-4017 . . . . . . . 2-15 00-209-3809 . . . . . . . 2-49 00-220-6202 . . . . . . . 2-178
00-205-8491 . . . . . . . 2-66 00-207-4575 . . . . . . . 2-42 00-209-3940 . . . . . . . 2-86 00-220-6226 . . . . . . . 2-178
00-205-8583 . . . . . . . 2-66 00-207-5916 . . . . . . . 2-43 00-209-5116 . . . . . . . 2-69 00-220-6228 . . . . . . . 2-178
00-205-9924 . . . . . . . 2-172 00-207-7352 . . . . . . . 2-26 00-209-6068 . . . . . . . 2-69 00-220-6242 . . . . . . . 2-178
00-205-9925 . . . . . . . 2-66 00-207-7467 . . . . . . . 2-27 00-209-7720 . . . . . . . 2-162 00-220-6274 . . . . . . . 2-178
00-205-9926 . . . . . . . 2-172 00-207-7468 . . . . . . . 2-27 00-209-7885 . . . . . . . 2-93 00-220-6634 . . . . . . . 2-58
00-206-1285 . . . . . . . 2-27 00-207-8241 . . . . . . . 2-183 00-209-7977 . . . . . . . 2-80 00-221-0864 . . . . . . . 2-152
00-206-1288 . . . . . . . 2-27 00-207-8253 . . . . . . . 2-12 00-209-8720 . . . . . . . 2-160 00-221-0872 . . . . . . . 2-151
00-206-1353 . . . . . . . 2-40 00-207-8299 . . . . . . . 2-58 00-209-9533 . . . . . . . 2-160 00-221-0881 . . . . . . . 2-152
00-206-1459 . . . . . . . 2-52 00-207-8744 . . . . . . . 2-48 00-209-9691 . . . . . . . 2-159 00-221-0882 . . . . . . . 2-152
00-206-1688 . . . . . . . 2-21 00-207-9274 . . . . . . . 2-59 00-210-2150 . . . . . . . 2-67 00-221-0883 . . . . . . . 2-152
00-206-1975 . . . . . . . 2-34 00-207-9791 . . . . . . . 2-42 00-210-2242 . . . . . . . 2-98 00-221-0884 . . . . . . . 2-152
00-206-2080 . . . . . . . 2-33 00-208-1429 . . . . . . . 2-12 00-210-3920 . . . . . . . 2-141 00-221-0885 . . . . . . . 2-152
00-206-2098 . . . . . . . 2-34 00-208-1601 . . . . . . . 2-39 00-210-3935 . . . . . . . 2-141 00-221-0886 . . . . . . . 2-152
00-206-2113 . . . . . . . 2-34 00-208-3359 . . . . . . . 2-58 00-211-8188 . . . . . . . 2-135 00-221-1842 . . . . . . . 2-4
00-206-2218 . . . . . . . 2-27 00-208-3467 . . . . . . . 2-64 00-211-8213 . . . . . . . 2-122 00-221-1848 . . . . . . . 2-10
00-206-2220 . . . . . . . 2-27 00-208-3468 . . . . . . . 2-64 00-211-8469 . . . . . . . 2-157 00-221-1850 . . . . . . . 2-10
00-206-2285 . . . . . . . 2-34 00-208-3636 . . . . . . . 2-42 00-211-9143 . . . . . . . 2-123 00-221-1882 . . . . . . . 2-9
00-206-2508 . . . . . . . 2-27 00-208-3646 . . . . . . . 2-42 00-211-9911 . . . . . . . 2-71 00-221-1885 . . . . . . . 2-10
00-206-2510 . . . . . . . 2-27 00-208-3649 . . . . . . . 2-42 00-212-0166 . . . . . . . 2-130 00-221-1886 . . . . . . . 2-10
00-206-2938 . . . . . . . 2-43 00-208-3654 . . . . . . . 2-42 00-213-0340 . . . . . . . 2-33 00-221-1887 . . . . . . . 2-10
00-206-3007 . . . . . . . 2-45 00-208-3755 . . . . . . . 2-56 00-213-0347 . . . . . . . 2-66 00-221-1888 . . . . . . . 2-9
00-206-3454 . . . . . . . 2-34 00-208-3786 . . . . . . . 2-58 00-213-8881 . . . . . . . 2-135 00-221-1893 . . . . . . . 2-6
00-206-3645 . . . . . . . 2-21 00-208-3988 . . . . . . . 2-45 00-213-9158 . . . . . . . 2-84 00-221-1894 . . . . . . . 2-6
00-206-3647 . . . . . . . 2-21 00-208-4023 . . . . . . . 2-62 00-213-9163 . . . . . . . 2-84 00-221-1899 . . . . . . . 2-3
00-206-3689 . . . . . . . 2-24 00-208-4026 . . . . . . . 2-62 00-215-1881 . . . . . . . 2-149 00-221-1902 . . . . . . . 2-3
00-206-3693 . . . . . . . 2-24 00-208-4135 . . . . . . . 2-58 00-215-5975 . . . . . . . 2-174 00-221-1918 . . . . . . . 2-1
00-206-3694 . . . . . . . 2-24 00-208-4305 . . . . . . . 2-58 00-216-5836 . . . . . . . 2-76 00-221-1919 . . . . . . . 2-2
00-206-3701 . . . . . . . 2-21 00-208-4736 . . . . . . . 2-64 00-216-8007 . . . . . . . 2-37 00-221-1921 . . . . . . . 2-2
00-206-3702 . . . . . . . 2-21 00-208-5233 . . . . . . . 2-58 00-216-8592 . . . . . . . 2-29 00-221-1932 . . . . . . . 2-3
00-206-3713 . . . . . . . 2-27 00-208-5769 . . . . . . . 2-58 00-216-9015 . . . . . . . 2-163 00-221-1934 . . . . . . . 2-2
00-206-3715 . . . . . . . 2-27 00-208-5775 . . . . . . . 2-58 00-217-0133 . . . . . . . 2-111 00-221-1945 . . . . . . . 2-2
00-206-3716 . . . . . . . 2-27 00-208-6403 . . . . . . . 2-26 00-217-9600 . . . . . . . 2-161 00-221-1948 . . . . . . . 2-2
00-206-4318 . . . . . . . 2-44 00-208-6405 . . . . . . . 2-27 00-218-1518 . . . . . . . 2-141 00-221-1991 . . . . . . . 2-4
00-206-4539 . . . . . . . 2-42 00-208-6406 . . . . . . . 2-26 00-218-5907 . . . . . . . 2-134 00-221-1992 . . . . . . . 2-4
2-196
Page Page Page Page

00-221-1999 . . . . . . . 2-5 00-222-2592 . . . . . . . 2-116 00-225-4594 . . . . . . . 2-21 00-226-9209 ....... 2-13
00-221-2047 . . . . . . . 2-5 00-222-2593 . . . . . . . 2-116 00-225-4595 . . . . . . . 2-21 00-226-9210 ....... 2-13
00-221-2051 . . . . . . . 2-9 00-222-2594 . . . . . . . 2-116 00-225-4597 . . . . . . . 2-21 00-226-9211 ....... 2-13
00-221-2072 . . . . . . . 2-3 00-222-2595 . . . . . . . 2-116 00-225-5328 . . . . . . . 2-66 00-226-9213 ....... 2-13
00-221-2076 . . . . . . . 2-5 00-222-4000 . . . . . . . 2-3 00-225-6400 . . . . . . . 2-26 00-226-9216 ....... 2-13
. . . . . . . 2-5 00-222-4003 . . . . . . . 2-185 00-225-6993 . . . . . . . 2-61 00-226-9217 ....... 2-13
00-221-2077 . . . . . . . 2-5 00-222-4004 . . . . . . . 2-185 00-225-7773 . . . . . . . 2-15 00-226-9218 ....... 2-13
00-221-2080 . . . . . . . 2-4 00-222-4005 . . . . . . . 2-185 00-225-7774 . . . . . . . 2-15 00-226-9219 ....... 2-13
00-221-2081 . . . . . . . 2-4 00-222-4006 . . . . . . . 2-185 00-225-8495 . . . . . . . 2-44 00-226-9220 ....... 2-13
00-221-2082 . . . . . . . 2-4 00-222-4007 . . . . . . . 2-185 00-225-8496 . . . . . . . 2-44 00-226-9221 ....... 2-13
00-221-2083 . . . . . . . 2-4 00-222-4009 . . . . . . . 2-185 00-225-8498 . . . . . . . 2-44 00-226-9222 ....... 2-13
00-221-2084 . . . . . . . 2-5 00-222-4010 . . . . . . . 2-185 00-225-8499 . . . . . . . 2-44 00-226-9223 ....... 2-13
00-221-2085 . . . . . . . 2-5 00-222-4011 . . . . . . . 2-185 00-225-8503 . . . . . . . 2-44 00-226-9224 ....... 2-13
00-221-2086 . . . . . . . 2-5 00-222-4246 . . . . . . . 2-60 00-225-8514 . . . . . . . 2-44 00-226-9226 ....... 2-13
00-221-2087 . . . . . . . 2-5 00-222-4565 . . . . . . . 2-2 00-225-8516 . . . . . . . 2-44 00-226-9230 ....... 2-13
00-221-2091 . . . . . . . 2-1 00-223-0952 . . . . . . . 2-177 00-225-9054 . . . . . . . 2-118 00-226-9232 ....... 2-13
00-221-2448 . . . . . . . 2-4 00-223-0953 . . . . . . . 2-177 00-225-9081 . . . . . . . 2-13 00-226-9234 ....... 2-13
00-221-3108 . . . . . . . 2-64 00-223-1073 . . . . . . . 2-119 00-225-9093 . . . . . . . 2-13 00-226-9238 ....... 2-13
00-221-4698 . . . . . . . 2-55 00-223-1123 . . . . . . . 2-48 00-226-2827 . . . . . . . 2-30 00-226-9820 ....... 2-43
00-221-5926 . . . . . . . 2-81 00-223-1286 . . . . . . . 2-137 00-226-3911 . . . . . . . 2-64 00-227-0582 ....... 2-44
00-221-6333 . . . . . . . 2-82 00-223-4174 . . . . . . . 2-140 00-226-4540 . . . . . . . 2-183 00-227-0850 ....... 2-44
00-221-6335 . . . . . . . 2-82 00-223-4175 . . . . . . . 2-140 00-226-4822 . . . . . . . 2-44 00-227-0852 ....... 2-44
00-221-6336 . . . . . . . 2-82 00-223-4365 . . . . . . . 2-152 00-226-4825 . . . . . . . 2-44 00-227-0853 ....... 2-44
00-221-6337 . . . . . . . 2-82 00-223-6113 . . . . . . . 2-77 00-226-4826 . . . . . . . 2-44 00-227-0856 ....... 2-44
00-221-6339 . . . . . . . 2-82 00-223-7182 . . . . . . . 2-177 00-226-4827 . . . . . . . 2-44 00-227-0857 ....... 2-44
00-221-6340 . . . . . . . 2-82 00-223-9158 . . . . . . . 2-2 00-226-4828 . . . . . . . 2-44 00-227-0858 ....... 2-44
00-221-6342 . . . . . . . 2-82 00-223-9191 . . . . . . . 2-5 00-226-4829 . . . . . . . 2-44 00-227-0860 ....... 2-44
00-221-6344 . . . . . . . 2-82 00-223-9194 . . . . . . . 2-5 00-226-4830 . . . . . . . 2-44 00-227-0868 ....... 2-44
00-221-6345 . . . . . . . 2-82 00-223-9604 . . . . . . . 2-7 00-226-4831 . . . . . . . 2-14 00-227-0869 ....... 2-44
00-221-6347 . . . . . . . 2-82 00-223-9606 . . . . . . . 2-7 . . . . . . . 2-44 00-227-0870 ....... 2-44
00-221-6350 . . . . . . . 2-82 00-223-9607 . . . . . . . 2-7 00-226-4833 . . . . . . . 2-44 00-227-0871 ....... 2-44
00-221-6352 . . . . . . . 2-82 00-223-9648 . . . . . . . 2-6 00-226-4835 . . . . . . . 2-44 00-227-0872 ....... 2-44
00-221-6353 . . . . . . . 2-82 00-224-0147 . . . . . . . 2-33 00-226-4837 . . . . . . . 2-44 00-227-0874 ....... 2-44
00-221-6354 . . . . . . . 2-82 00-224-0747 . . . . . . . 2-69 00-226-4839 . . . . . . . 2-44 00-227-0875 ....... 2-44
00-221-6357 . . . . . . . 2-82 00-224-7201 . . . . . . . 2-152 00-226-4841 . . . . . . . 2-44 00-227-0878 ....... 2-44
00-221-6360 . . . . . . . 2-82 00-224-7202 . . . . . . . 2-152 00-226-5978 . . . . . . . 2-68 00-227-0881 ....... 2-44
00-222-0358 . . . . . . . 2-185 00-224-7203 . . . . . . . 2-152 00-226-5980 . . . . . . . 2-68 00-227-0882 ....... 2-44
00-222-0717 . . . . . . . 2-133 00-224-7205 . . . . . . . 2-152 00-226-7238 . . . . . . . 2-15 00-227-0885 ....... 2-44
00-222-1568 . . . . . . . 2-99 00-224-7207 . . . . . . . 2-152 00-226-7582 . . . . . . . 2-98 00-227-0896 ....... 2-44
00-222-1680 . . . . . . . 2-118 00-224-7209 . . . . . . . 2-152 00-226-7605 . . . . . . . 2-16 00-227-0898 ....... 2-44
00-222-2107 . . . . . . . 2-82 00-224-7215 . . . . . . . 2-152 00-226-7609 . . . . . . . 2-15 00-227-0900 ....... 2-44
00-222-2108 . . . . . . . 2-82 00-224-7216 . . . . . . . 2-152 00-226-7767 . . . . . . . 2-13 00-227-0912 ....... 2-44
00-222-2110 . . . . . . . 2-82 00-224-9937 . . . . . . . 2-9 00-226-7768 . . . . . . . 2-13 00-227-0914 ....... 2-44
00-222-2111 . . . . . . . 2-82 00-224-9942 . . . . . . . 2-1 00-226-9196 . . . . . . . 2-13 00-227-0915 ....... 2-44
00-222-2112 . . . . . . . 2-82 00-225-2784 . . . . . . . 2-31 00-226-9198 . . . . . . . 2-13 00-227-0916 ....... 2-44
00-222-2113 . . . . . . . 2-82 00-225-3838 . . . . . . . 2-13 00-226-9201 . . . . . . . 2-13 00-227-0918 ....... 2-44
00-222-2565 . . . . . . . 2-129 00-225-3841 . . . . . . . 2-14 00-226-9202 . . . . . . . 2-13 00-227-0920 ....... 2-44
00-222-2566 . . . . . . . 2-129 00-225-3842 . . . . . . . 2-14 00-226-9203 . . . . . . . 2-13 00-227-0922 ....... 2-44
00-222-2568 . . . . . . . 2-129 00-225-3843 . . . . . . . 2-14 00-226-9204 . . . . . . . 2-13 00-227-0927 ....... 2-44
00-222-2569 . . . . . . . 2-129 00-225-4588 . . . . . . . 2-21 00-226-9205 . . . . . . . 2-13 00-227-0928 ....... 2-44
00-222-2576 . . . . . . . 2-116 00-225-4590 . . . . . . . 2-21 00-226-9206 . . . . . . . 2-13 00-227-0931 ....... 2-44
00-222-2590 . . . . . . . 2-116 00-225-4592 . . . . . . . 2-21 00-226-9207 . . . . . . . 2-13 00-227-0932 ....... 2-44
00-222-2591 . . . . . . . 2-116 00-225-4593 . . . . . . . 2-21 00-226-9208 . . . . . . . 2-13 00-227-0933 ....... 2-44
2-197
Page Page Page Page

00-227-0934 . . . . . . . 2-44 00-234-1635 . . . . . . . 2-75 00-237-4802 . . . . . . . 2-184 00-239-8024 . . . . . . . 2-75
00-227-0936 . . . . . . . 2-45 00-234-1638 . . . . . . . 2-75 00-237-4803 . . . . . . . 2-184 00-239-8027 . . . . . . . 2-75
00-227-0939 . . . . . . . 2-45 00-234-1642 . . . . . . . 2-75 00-237-4806 . . . . . . . 2-184 00-239-8031 . . . . . . . 2-75
00-227-0941 . . . . . . . 2-45 00-234-1652 . . . . . . . 2-75 00-237-4807 . . . . . . . 2-184 00-239-8032 . . . . . . . 2-75
00-227-0944 . . . . . . . 2-45 00-234-1663 . . . . . . . 2-75 00-237-4808 . . . . . . . 2-184 00-240-0067 . . . . . . . 2-177
00-227-0946 . . . . . . . 2-45 00-234-1851 . . . . . . . 2-75 00-237-4809 . . . . . . . 2-184 00-240-0068 . . . . . . . 2-177
00-227-0949 . . . . . . . 2-45 00-234-1852 . . . . . . . 2-75 00-237-4810 . . . . . . . 2-184 00-240-0069 . . . . . . . 2-177
00-228-1989 . . . . . . . 2-73 00-234-1854 . . . . . . . 2-75 00-237-4812 . . . . . . . 2-184 00-240-0070 . . . . . . . 2-177
00-229-3041 . . . . . . . 2-1 00-234-1856 . . . . . . . 2-75 00-237-4816 . . . . . . . 2-184 00-240-0071 . . . . . . . 2-177
00-229-3060 . . . . . . . 2-1 00-234-1858 . . . . . . . 2-75 00-237-4817 . . . . . . . 2-184 00-240-1186 . . . . . . . 2-158
00-229-3080 . . . . . . . 2-151 . . . . . . . 2-75 00-237-4820 . . . . . . . 2-184 00-240-2305 . . . . . . . 2-133
00-229-3092 . . . . . . . 2-151 00-234-1859 . . . . . . . 2-75 00-237-4822 . . . . . . . 2-184 00-240-2306 . . . . . . . 2-133
00-229-3094 . . . . . . . 2-151 00-234-1860 . . . . . . . 2-75 00-237-4824 . . . . . . . 2-184 00-240-2307 . . . . . . . 2-133
00-229-3095 . . . . . . . 2-151 00-234-1861 . . . . . . . 2-75 00-237-4827 . . . . . . . 2-184 00-240-2309 . . . . . . . 2-133
00-229-3097 . . . . . . . 2-151 00-234-1863 . . . . . . . 2-75 00-237-4828 . . . . . . . 2-184 00-240-2310 . . . . . . . 2-133
00-229-4047 . . . . . . . 2-102 00-234-1864 . . . . . . . 2-75 00-237-4829 . . . . . . . 2-184 00-240-2313 . . . . . . . 2-133
00-229-4224 . . . . . . . 2-140 00-234-4240 . . . . . . . 2-66 00-237-4830 . . . . . . . 2-184 00-240-2314 . . . . . . . 2-133
00-229-4246 . . . . . . . 2-140 00-234-5223 . . . . . . . 2-8 00-237-4833 . . . . . . . 2-184 00-240-2364 . . . . . . . 2-142
00-229-4248 . . . . . . . 2-140 00-234-5224 . . . . . . . 2-8 00-237-4835 . . . . . . . 2-184 00-240-2365 . . . . . . . 2-142
00-229-4250 . . . . . . . 2-140 00-234-6744 . . . . . . . 2-9 00-237-4836 . . . . . . . 2-184 00-240-2584 . . . . . . . 2-141
00-229-4292 . . . . . . . 2-140 00-234-6745 . . . . . . . 2-9 00-237-5653 . . . . . . . 2-111 00-240-2920 . . . . . . . 2-152
00-229-4321 . . . . . . . 2-140 00-234-7043 . . . . . . . 2-74 00-237-8192 . . . . . . . 2-154 00-240-3392 . . . . . . . 2-115
00-229-4323 . . . . . . . 2-140 00-234-7465 . . . . . . . 2-79 00-237-8254 . . . . . . . 2-177 00-240-4683 . . . . . . . 2-149
00-229-4326 . . . . . . . 2-140 00-234-7913 . . . . . . . 2-90 00-237-8574 . . . . . . . 2-4 00-240-4685 . . . . . . . 2-149
00-229-4343 . . . . . . . 2-140 00-234-8017 . . . . . . . 2-2 00-237-8701 . . . . . . . 2-150 00-240-5309 . . . . . . . 2-141
00-229-4344 . . . . . . . 2-140 00-234-8421 . . . . . . . 2-140 00-238-0848 . . . . . . . 2-80 00-240-6487 . . . . . . . 2-42
00-229-4345 . . . . . . . 2-140 00-234-8424 . . . . . . . 2-139 00-238-1734 . . . . . . . 2-7 00-241-1075 . . . . . . . 2-64
00-229-4353 . . . . . . . 2-140 00-234-8425 . . . . . . . 2-139 00-238-3106 . . . . . . . 2-6 00-241-3599 . . . . . . . 2-8
00-229-4354 . . . . . . . 2-140 00-234-8426 . . . . . . . 2-139 00-238-3299 . . . . . . . 2-7 00-241-6604 . . . . . . . 2-62
00-229-4370 . . . . . . . 2-140 00-234-8427 . . . . . . . 2-140 00-238-5685 . . . . . . . 2-149 00-241-6606 . . . . . . . 2-62
00-229-4372 . . . . . . . 2-140 00-234-8430 . . . . . . . 2-139 00-238-6024 . . . . . . . 2-184 00-241-6609 . . . . . . . 2-62
00-229-4373 . . . . . . . 2-140 00-234-8431 . . . . . . . 2-139 00-239-0647 . . . . . . . 2-90 00-241-6640 . . . . . . . 2-61
00-230-3251 . . . . . . . 2-151 00-235-1074 . . . . . . . 2-73 00-239-0892 . . . . . . . 2-7 00-241-6667 . . . . . . . 2-61
00-230-6949 . . . . . . . 2-174 00-236-3149 . . . . . . . 2-160 00-239-1293 . . . . . . . 2-84 00-241-7192 . . . . . . . 2-95
00-231-6582 . . . . . . . 2-91 00-236-8345 . . . . . . . 2-75 00-239-1873 . . . . . . . 2-104 00-241-7330 . . . . . . . 2-75
00-231-6586 . . . . . . . 2-91 00-236-8353 . . . . . . . 2-75 00-239-1877 . . . . . . . 2-104 00-241-7332 . . . . . . . 2-75
00-231-6587 . . . . . . . 2-91 00-236-8355 . . . . . . . 2-75 00-239-1879 . . . . . . . 2-104 00-241-7353 . . . . . . . 2-80
00-231-6589 . . . . . . . 2-91 00-236-8356 . . . . . . . 2-75 00-239-1882 . . . . . . . 2-67 00-241-7421 . . . . . . . 2-95
00-231-6591 . . . . . . . 2-91 00-236-8357 . . . . . . . 2-75 00-239-3603 . . . . . . . 2-105 00-241-7427 . . . . . . . 2-80
00-231-6619 . . . . . . . 2-91 00-236-8359 . . . . . . . 2-75 00-239-3732 . . . . . . . 2-112 00-242-0370 . . . . . . . 2-86
00-232-0681 . . . . . . . 2-136 00-236-8362 . . . . . . . 2-75 00-239-3733 . . . . . . . 2-112 00-242-2555 . . . . . . . 2-150
00-232-0763 . . . . . . . 2-62 00-236-8365 . . . . . . . 2-75 00-239-3768 . . . . . . . 2-114 00-242-3688 . . . . . . . 2-174
00-232-2057 . . . . . . . 2-90 00-236-8371 . . . . . . . 2-75 00-239-4304 . . . . . . . 2-111 00-242-3926 . . . . . . . 2-5
00-232-2447 . . . . . . . 2-128 00-237-4779 . . . . . . . 2-183 00-239-5361 . . . . . . . 2-112 00-242-4403 . . . . . . . 2-152
00-232-8352 . . . . . . . 2-110 00-237-4780 . . . . . . . 2-183 00-239-5368 . . . . . . . 2-112 00-242-4404 . . . . . . . 2-152
00-233-2440 . . . . . . . 2-81 00-237-4781 . . . . . . . 2-183 . . . . . . . 2-112 00-242-4405 . . . . . . . 2-152
00-234-0142 . . . . . . . 2-31 00-237-4782 . . . . . . . 2-183 00-239-5373 . . . . . . . 2-112 00-242-4406 . . . . . . . 2-152
00-234-1619 . . . . . . . 2-75 00-237-4786 . . . . . . . 2-183 00-239-5377 . . . . . . . 2-112 00-242-6034 . . . . . . . 2-183
00-234-1623 . . . . . . . 2-75 00-237-4792 . . . . . . . 2-184 00-239-7682 . . . . . . . 2-78 00-242-9119 . . . . . . . 2-74
00-234-1624 . . . . . . . 2-75 00-237-4793 . . . . . . . 2-184 00-239-7985 . . . . . . . 2-106 00-242-9121 . . . . . . . 2-74
00-234-1626 . . . . . . . 2-75 00-237-4797 . . . . . . . 2-184 00-239-8019 . . . . . . . 2-75 00-243-1165 . . . . . . . 2-75
00-234-1628 . . . . . . . 2-75 00-237-4799 . . . . . . . 2-184 00-239-8022 . . . . . . . 2-75 00-243-1167 . . . . . . . 2-75
00-234-1631 . . . . . . . 2-75 00-237-4801 . . . . . . . 2-184 00-239-8023 . . . . . . . 2-75 00-243-2100 . . . . . . . 2-6
2-198
Page Page Page Page

00-243-2259 . . . . . . . 2-70 00-246-6380 . . . . . . . 2-130 00-248-7876 . . . . . . . 2-52 00-253-5607 . . . . . . . 2-19
00-243-2933 . . . . . . . 2-2 00-246-6392 . . . . . . . 2-171 00-248-7950 . . . . . . . 2-52 00-253-5612 . . . . . . . 2-19
00-243-3349 . . . . . . . 2-10 00-246-6403 . . . . . . . 2-126 00-248-7953 . . . . . . . 2-52 00-253-5614 . . . . . . . 2-19
00-243-3350 . . . . . . . 2-7 00-246-6404 . . . . . . . 2-126 00-248-7963 . . . . . . . 2-52 00-253-5615 . . . . . . . 2-19
00-243-3351 . . . . . . . 2-8 00-246-8233 . . . . . . . 2-67 00-248-7964 . . . . . . . 2-52 00-253-5616 . . . . . . . 2-19
00-243-3367 . . . . . . . 2-8 00-246-8833 . . . . . . . 2-4 00-248-7965 . . . . . . . 2-52 00-253-5618 . . . . . . . 2-19
00-243-6704 . . . . . . . 2-146 00-246-9677 . . . . . . . 2-52 00-248-7966 . . . . . . . 2-52 00-253-5625 . . . . . . . 2-19
00-243-6705 . . . . . . . 2-146 00-246-9679 . . . . . . . 2-52 00-248-7968 . . . . . . . 2-52 00-253-7245 . . . . . . . 2-160
00-243-9649 . . . . . . . 2-6 00-246-9926 . . . . . . . 2-102 00-248-7976 . . . . . . . 2-52 00-254-0802 . . . . . . . 2-52
00-244-0191 . . . . . . . 2-128 00-247-1720 . . . . . . . 2-174 00-248-7977 . . . . . . . 2-52 00-254-5017 . . . . . . . 2-137
00-244-0192 . . . . . . . 2-128 00-247-3628 . . . . . . . 2-104 00-248-8268 . . . . . . . 2-52 00-254-5025 . . . . . . . 2-137
00-244-0193 . . . . . . . 2-128 00-247-3631 . . . . . . . 2-104 00-248-8290 . . . . . . . 2-52 00-255-0296 . . . . . . . 2-173
00-244-0195 . . . . . . . 2-128 00-247-6462 . . . . . . . 2-73 00-248-8297 . . . . . . . 2-52 00-255-2572 . . . . . . . 2-109
00-244-0197 . . . . . . . 2-128 00-247-7568 . . . . . . . 2-103 00-249-3270 . . . . . . . 2-172 00-255-4386 . . . . . . . 2-171
00-244-2728 . . . . . . . 2-141 00-247-7817 . . . . . . . 2-104 00-249-7753 . . . . . . . 2-80 00-255-6475 . . . . . . . 2-104
00-244-7324 . . . . . . . 2-145 00-248-1336 . . . . . . . 2-174 00-250-0870 . . . . . . . 2-2 00-255-7564 . . . . . . . 2-2
00-244-7325 . . . . . . . 2-145 00-248-6809 . . . . . . . 2-37 00-250-1261 . . . . . . . 2-174 00-256-2465 . . . . . . . 2-171
00-244-7326 . . . . . . . 2-145 00-248-7441 . . . . . . . 2-52 00-250-1345 . . . . . . . 2-149 00-256-3439 . . . . . . . 2-172
00-244-7327 . . . . . . . 2-145 00-248-7446 . . . . . . . 2-52 00-250-2049 . . . . . . . 2-174 00-256-4794 . . . . . . . 2-73
00-244-7771 . . . . . . . 2-4 00-248-7447 . . . . . . . 2-52 00-250-4761 . . . . . . . 2-2 00-257-6177 . . . . . . . 2-55
00-244-9276 . . . . . . . 2-128 00-248-7448 . . . . . . . 2-52 00-250-5743 . . . . . . . 2-130 00-260-1415 . . . . . . . 2-167
00-244-9277 . . . . . . . 2-128 00-248-7451 . . . . . . . 2-52 00-250-5838 . . . . . . . 2-104 00-260-2937 . . . . . . . 2-51
00-244-9278 . . . . . . . 2-128 00-248-7473 . . . . . . . 2-52 00-250-5865 . . . . . . . 2-104 00-260-7515 . . . . . . . 2-49
00-244-9279 . . . . . . . 2-128 00-248-7481 . . . . . . . 2-52 00-250-6245 . . . . . . . 2-5 00-260-7924 . . . . . . . 2-56
00-244-9280 . . . . . . . 2-128 00-248-7483 . . . . . . . 2-52 00-250-6254 . . . . . . . 2-41 00-260-8949 . . . . . . . 2-178
00-244-9281 . . . . . . . 2-128 00-248-7486 . . . . . . . 2-52 00-250-6858 . . . . . . . 2-92 00-260-8953 . . . . . . . 2-178
00-245-0301 . . . . . . . 2-9 00-248-7487 . . . . . . . 2-52 00-250-9477 . . . . . . . 2-57 00-260-8958 . . . . . . . 2-178
00-245-0376 . . . . . . . 2-67 00-248-7488 . . . . . . . 2-52 00-251-4004 . . . . . . . 2-31 00-260-8962 . . . . . . . 2-178
00-245-1254 . . . . . . . 2-75 00-248-7489 . . . . . . . 2-52 00-251-4418 . . . . . . . 2-104 00-260-8966 . . . . . . . 2-178
00-245-3419 . . . . . . . 2-61 00-248-7491 . . . . . . . 2-52 00-251-7971 . . . . . . . 2-139 00-260-8969 . . . . . . . 2-178
00-245-3424 . . . . . . . 2-61 00-248-7493 . . . . . . . 2-52 00-251-7974 . . . . . . . 2-141 00-260-8973 . . . . . . . 2-178
00-245-3504 . . . . . . . 2-61 00-248-7501 . . . . . . . 2-52 00-251-7975 . . . . . . . 2-141 00-261-0828 . . . . . . . 2-81
00-245-3505 . . . . . . . 2-61 00-248-7511 . . . . . . . 2-52 00-251-7976 . . . . . . . 2-141 00-261-3185 . . . . . . . 2-81
00-245-3615 . . . . . . . 2-57 00-248-7512 . . . . . . . 2-52 00-251-9754 . . . . . . . 2-79 00-261-3194 . . . . . . . 2-81
00-245-4621 . . . . . . . 2-29 00-248-7513 . . . . . . . 2-52 00-251-9986 . . . . . . . 2-80 00-261-3918 . . . . . . . 2-93
00-245-5211 . . . . . . . 2-119 00-248-7514 . . . . . . . 2-52 00-252-1797 . . . . . . . 2-109 00-261-5423 . . . . . . . 2-128
00-245-5611 . . . . . . . 2-120 00-248-7518 . . . . . . . 2-52 00-252-3326 . . . . . . . 2-141 00-261-5424 . . . . . . . 2-128
00-245-8256 . . . . . . . 2-109 00-248-7844 . . . . . . . 2-52 00-252-3888 . . . . . . . 2-172 00-261-5433 . . . . . . . 2-128
00-245-8815 . . . . . . . 2-61 00-248-7845 . . . . . . . 2-52 00-252-4721 . . . . . . . 2-170 00-261-5440 . . . . . . . 2-128
00-245-8825 . . . . . . . 2-61 00-248-7846 . . . . . . . 2-52 00-252-4758 . . . . . . . 2-170 00-261-5455 . . . . . . . 2-128
00-245-8826 . . . . . . . 2-61 00-248-7849 . . . . . . . 2-52 00-252-5398 . . . . . . . 2-90 00-261-7156 . . . . . . . 2-69
00-245-9437 . . . . . . . 2-146 00-248-7850 . . . . . . . 2-52 00-252-5969 . . . . . . . 2-74 00-261-8278 . . . . . . . 2-69
00-245-9438 . . . . . . . 2-146 00-248-7851 . . . . . . . 2-52 00-252-5986 . . . . . . . 2-75 00-261-8483 . . . . . . . 2-102
00-245-9440 . . . . . . . 2-146 00-248-7852 . . . . . . . 2-52 00-252-7769 . . . . . . . 2-171 00-261-8493 . . . . . . . 2-102
00-246-0233 . . . . . . . 2-106 00-248-7856 . . . . . . . 2-52 00-252-8444 . . . . . . . 2-161 00-261-8496 . . . . . . . 2-102
00-246-0330 . . . . . . . 2-151 00-248-7861 . . . . . . . 2-52 00-252-8446 . . . . . . . 2-159 00-262-4701 . . . . . . . 2-174
00-246-0331 . . . . . . . 2-151 00-248-7864 . . . . . . . 2-52 00-253-3403 . . . . . . . 2-73 00-262-4953 . . . . . . . 2-130
00-246-0333 . . . . . . . 2-151 00-248-7867 . . . . . . . 2-52 00-253-3810 . . . . . . . 2-34 00-262-5429 . . . . . . . 2-66
00-246-0334 . . . . . . . 2-151 00-248-7870 . . . . . . . 2-52 00-253-4393 . . . . . . . 2-151 00-262-5516 . . . . . . . 2-56
00-246-2303 . . . . . . . 2-5 00-248-7871 . . . . . . . 2-52 00-253-4924 . . . . . . . 2-34 00-262-6622 . . . . . . . 2-150
00-246-2914 . . . . . . . 2-104 00-248-7872 . . . . . . . 2-52 00-253-5339 . . . . . . . 2-89 00-262-6623 . . . . . . . 2-150
00-246-3092 . . . . . . . 2-165 00-248-7873 . . . . . . . 2-52 00-253-5603 . . . . . . . 2-19 00-262-8162 . . . . . . . 2-75
00-246-4369 . . . . . . . 2-84 00-248-7874 . . . . . . . 2-52 00-253-5606 . . . . . . . 2-19 00-262-8179 . . . . . . . 2-179
2-199
Page Page Page Page

00-262-8180 . . . . . . . 2-179 00-266-9709 . . . . . . . 2-183 00-269-3218 . . . . . . . 2-13 00-272-5696 . . . . . . . 2-56
00-262-8181 . . . . . . . 2-179 00-266-9711 . . . . . . . 2-183 00-269-3234 . . . . . . . 2-14 00-272-5697 . . . . . . . 2-56
00-262-8182 . . . . . . . 2-179 00-267-1586 . . . . . . . 2-183 00-269-3235 . . . . . . . 2-14 00-272-5698 . . . . . . . 2-56
00-262-8195 . . . . . . . 2-179 00-267-1589 . . . . . . . 2-183 00-269-3236 . . . . . . . 2-14 00-272-5700 . . . . . . . 2-56
00-262-8197 . . . . . . . 2-73 00-267-1590 . . . . . . . 2-183 00-269-3238 . . . . . . . 2-14 00-272-5701 . . . . . . . 2-56
00-262-9436 . . . . . . . 2-118 00-267-1591 . . . . . . . 2-183 00-269-3239 . . . . . . . 2-14 00-272-5702 . . . . . . . 2-56
00-262-9437 . . . . . . . 2-117 00-267-2063 . . . . . . . 2-177 00-269-3240 . . . . . . . 2-14 00-272-5703 . . . . . . . 2-56
00-262-9439 . . . . . . . 2-117 00-267-2155 . . . . . . . 2-177 00-269-3241 . . . . . . . 2-14 00-272-5704 . . . . . . . 2-56
00-262-9455 . . . . . . . 2-149 00-267-2158 . . . . . . . 2-177 00-269-3242 . . . . . . . 2-14 00-272-5705 . . . . . . . 2-56
00-263-0376 . . . . . . . 2-2 00-267-2283 . . . . . . . 2-177 00-269-3244 . . . . . . . 2-14 00-272-6423 . . . . . . . 2-60
00-263-0378 . . . . . . . 2-2 00-267-2289 . . . . . . . 2-177 00-269-3246 . . . . . . . 2-14 00-272-6478 . . . . . . . 2-69
00-263-2710 . . . . . . . 2-168 00-267-2296 . . . . . . . 2-177 00-269-3248 . . . . . . . 2-14 00-272-6544 . . . . . . . 2-51
00-263-2862 . . . . . . . 2-62 00-267-2337 . . . . . . . 2-177 00-269-4204 . . . . . . . 2-21 00-272-6545 . . . . . . . 2-51
00-263-3585 . . . . . . . 2-37 00-267-2340 . . . . . . . 2-177 00-269-4495 . . . . . . . 2-119 00-272-7188 . . . . . . . 2-17
00-263-3586 . . . . . . . 2-37 00-267-2392 . . . . . . . 2-177 00-269-4526 . . . . . . . 2-44 00-273-1935 . . . . . . . 2-4
00-263-3831 . . . . . . . 2-170 00-267-2394 . . . . . . . 2-177 00-269-6797 . . . . . . . 2-60 00-273-1948 . . . . . . . 2-8
00-263-5098 . . . . . . . 2-34 00-267-2402 . . . . . . . 2-177 00-270-7111 . . . . . . . 2-56 00-273-1960 . . . . . . . 2-8
00-263-5877 . . . . . . . 2-170 00-267-2403 . . . . . . . 2-177 00-270-8290 . . . . . . . 2-44 00-273-1965 . . . . . . . 2-8
00-263-5907 . . . . . . . 2-170 00-267-2406 . . . . . . . 2-177 00-270-8465 . . . . . . . 2-125 00-273-5571 . . . . . . . 2-15
00-263-5915 . . . . . . . 2-170 00-267-2416 . . . . . . . 2-177 00-270-8466 . . . . . . . 2-125 00-273-5591 . . . . . . . 2-16
00-263-5938 . . . . . . . 2-168 00-267-3371 . . . . . . . 2-2 00-270-8467 . . . . . . . 2-125 00-273-5857 . . . . . . . 2-35
00-263-5981 . . . . . . . 2-168 00-267-8952 . . . . . . . 2-14 00-270-8468 . . . . . . . 2-125 00-273-5873 . . . . . . . 2-59
00-263-6632 . . . . . . . 2-91 00-267-8953 . . . . . . . 2-14 00-270-8470 . . . . . . . 2-125 00-273-6304 . . . . . . . 2-16
00-263-7014 . . . . . . . 2-40 00-267-8954 . . . . . . . 2-14 00-270-8471 . . . . . . . 2-125 00-273-6438 . . . . . . . 2-16
00-263-7536 . . . . . . . 2-11 00-267-8956 . . . . . . . 2-14 00-270-8473 . . . . . . . 2-125 00-273-7460 . . . . . . . 2-16
00-264-0300 . . . . . . . 2-57 00-267-8958 . . . . . . . 2-14 00-270-8475 . . . . . . . 2-125 00-273-7463 . . . . . . . 2-16
00-264-0723 . . . . . . . 2-65 00-267-8962 . . . . . . . 2-14 00-270-8544 . . . . . . . 2-134 00-273-9361 . . . . . . . 2-33
00-264-0919 . . . . . . . 2-141 00-267-8971 . . . . . . . 2-21 00-270-9381 . . . . . . . 2-44 00-273-9380 . . . . . . . 2-52
00-264-1240 . . . . . . . 2-59 00-267-9974 . . . . . . . 2-61 00-270-9417 . . . . . . . 2-46 00-273-9790 . . . . . . . 2-7
00-264-1321 . . . . . . . 2-58 00-268-3116 . . . . . . . 2-151 00-271-2279 . . . . . . . 2-44 00-273-9791 . . . . . . . 2-6
00-264-2172 . . . . . . . 2-92 00-268-3475 . . . . . . . 2-178 00-271-2289 . . . . . . . 2-44 00-273-9793 . . . . . . . 2-2
00-264-2220 . . . . . . . 2-20 00-268-3476 . . . . . . . 2-178 00-271-2290 . . . . . . . 2-44 00-273-9865 . . . . . . . 2-6
00-264-3552 . . . . . . . 2-56 00-268-3477 . . . . . . . 2-178 00-271-3233 . . . . . . . 2-65 00-273-9867 . . . . . . . 2-3
00-264-5925 . . . . . . . 2-33 00-268-3478 . . . . . . . 2-178 00-271-3707 . . . . . . . 2-80 00-274-0023 . . . . . . . 2-34
00-264-6400 . . . . . . . 2-9 00-268-3479 . . . . . . . 2-178 00-271-4958 . . . . . . . 2-26 00-274-0905 . . . . . . . 2-44
00-264-7582 . . . . . . . 2-139 00-268-3480 . . . . . . . 2-178 00-271-5950 . . . . . . . 2-151 00-274-1966 . . . . . . . 2-46
00-264-7586 . . . . . . . 2-142 00-268-3481 . . . . . . . 2-178 00-271-5986 . . . . . . . 2-152 00-274-2119 . . . . . . . 2-41
00-264-7587 . . . . . . . 2-142 00-268-3482 . . . . . . . 2-178 00-271-5988 . . . . . . . 2-152 00-274-2857 . . . . . . . 2-5
00-264-7588 . . . . . . . 2-142 00-268-6022 . . . . . . . 2-56 00-271-6191 . . . . . . . 2-27 00-274-4569 . . . . . . . 2-67
00-264-7592 . . . . . . . 2-142 00-268-6054 . . . . . . . 2-56 00-271-6819 . . . . . . . 2-40 00-274-6209 . . . . . . . 2-151
00-264-7598 . . . . . . . 2-142 00-268-6056 . . . . . . . 2-57 00-271-7454 . . . . . . . 2-69 00-274-7834 . . . . . . . 2-66
00-264-8460 . . . . . . . 2-116 00-268-6057 . . . . . . . 2-57 00-271-7930 . . . . . . . 2-152 00-274-8837 . . . . . . . 2-172
00-264-8461 . . . . . . . 2-116 00-268-6068 . . . . . . . 2-57 00-271-8253 . . . . . . . 2-26 00-274-9337 . . . . . . . 2-59
00-264-8463 . . . . . . . 2-116 00-268-7292 . . . . . . . 2-55 00-271-8447 . . . . . . . 2-45 00-275-1311 . . . . . . . 2-68
00-265-3126 . . . . . . . 2-150 00-268-7295 . . . . . . . 2-55 00-272-2135 . . . . . . . 2-40 00-275-1330 . . . . . . . 2-66
00-265-3667 . . . . . . . 2-163 00-268-7313 . . . . . . . 2-55 00-272-2136 . . . . . . . 2-40 00-275-2551 . . . . . . . 2-177
00-265-3671 . . . . . . . 2-163 00-268-9879 . . . . . . . 2-116 00-272-2138 . . . . . . . 2-40 00-275-2950 . . . . . . . 2-157
00-265-9152 . . . . . . . 2-53 00-268-9880 . . . . . . . 2-116 00-272-2995 . . . . . . . 2-183 00-275-3371 . . . . . . . 2-127
00-266-1963 . . . . . . . 2-169 00-269-2803 . . . . . . . 2-13 00-272-3533 . . . . . . . 2-35 00-275-4461 . . . . . . . 2-90
00-266-7038 . . . . . . . 2-2 00-269-2811 . . . . . . . 2-13 00-272-3683 . . . . . . . 2-35 00-275-4583 . . . . . . . 2-145
00-266-7047 . . . . . . . 2-2 00-269-3206 . . . . . . . 2-13 00-272-4123 . . . . . . . 2-35 00-275-4766 . . . . . . . 2-81
00-266-7557 . . . . . . . 2-40 00-269-3211 . . . . . . . 2-13 00-272-4250 . . . . . . . 2-46 00-275-5408 . . . . . . . 2-37
00-266-9706 . . . . . . . 2-183 00-269-3217 . . . . . . . 2-13 00-272-5368 . . . . . . . 2-25 00-275-5609 . . . . . . . 2-58
2-200
Page Page Page Page

00-275-6097 . . . . . . . 2-94 00-279-9317 . . . . . . . 2-125 00-282-4919 . . . . . . . 2-26 00-285-7979 . . . . . . . 2-142
00-275-6635 . . . . . . . 2-65 00-279-9322 . . . . . . . 2-125 00-282-5031 . . . . . . . 2-169 00-285-9495 . . . . . . . 2-130
00-275-7451 . . . . . . . 2-183 00-279-9323 . . . . . . . 2-125 00-282-5906 . . . . . . . 2-130 00-285-9635 . . . . . . . 2-67
00-275-7459 . . . . . . . 2-183 00-279-9391 . . . . . . . 2-125 00-282-6129 . . . . . . . 2-104 00-285-9656 . . . . . . . 2-104
00-275-8263 . . . . . . . 2-78 00-281-1403 . . . . . . . 2-65 00-282-6888 . . . . . . . 2-80 00-286-2458 . . . . . . . 2-141
00-275-8438 . . . . . . . 2-34 00-281-1552 . . . . . . . 2-97 00-282-6907 . . . . . . . 2-65 00-286-4079 . . . . . . . 2-134
00-275-9211 . . . . . . . 2-70 00-281-1553 . . . . . . . 2-97 00-282-7050 . . . . . . . 2-79 00-286-4158 . . . . . . . 2-134
00-275-9333 . . . . . . . 2-56 . . . . . . . 2-98 00-282-7102 . . . . . . . 2-170 00-286-4631 . . . . . . . 2-83
00-275-9561 . . . . . . . 2-42 00-281-1557 . . . . . . . 2-91 00-282-7109 . . . . . . . 2-170 00-286-6047 . . . . . . . 2-91
00-275-9644 . . . . . . . 2-41 00-281-1584 . . . . . . . 2-43 00-282-7120 . . . . . . . 2-170 00-286-6600 . . . . . . . 2-141
00-275-9787 . . . . . . . 2-44 00-281-1922 . . . . . . . 2-97 00-282-7207 . . . . . . . 2-168 00-286-6868 . . . . . . . 2-130
00-276-1299 . . . . . . . 2-86 00-281-2193 . . . . . . . 2-142 00-282-7392 . . . . . . . 2-168 00-286-6894 . . . . . . . 2-146
00-276-1396 . . . . . . . 2-40 00-281-2194 . . . . . . . 2-142 00-282-7409 . . . . . . . 2-134 00-286-7578 . . . . . . . 2-87
00-276-2767 . . . . . . . 2-173 00-281-2553 . . . . . . . 2-89 00-282-7458 . . . . . . . 2-95 00-286-8718 . . . . . . . 2-171
00-276-3015 . . . . . . . 2-64 00-281-3118 . . . . . . . 2-35 00-282-7463 . . . . . . . 2-90 00-286-9416 . . . . . . . 2-137
00-276-3018 . . . . . . . 2-64 00-281-3120 . . . . . . . 2-35 00-282-7471 . . . . . . . 2-93 00-286-9418 . . . . . . . 2-137
00-276-3280 . . . . . . . 2-37 00-281-3342 . . . . . . . 2-66 00-282-7823 . . . . . . . 2-56 00-286-9421 . . . . . . . 2-137
00-276-4050 . . . . . . . 2-81 00-281-3634 . . . . . . . 2-172 00-282-7834 . . . . . . . 2-58 00-286-9424 . . . . . . . 2-137
00-276-4282 . . . . . . . 2-89 00-281-4359 . . . . . . . 2-92 00-282-7835 . . . . . . . 2-58 00-286-9427 . . . . . . . 2-137
00-276-4283 . . . . . . . 2-89 00-281-4538 . . . . . . . 2-15 00-282-8131 . . . . . . . 2-98 00-286-9855 . . . . . . . 2-114
00-276-4803 . . . . . . . 2-80 00-281-4781 . . . . . . . 2-89 00-282-8132 . . . . . . . 2-98 00-287-0092 . . . . . . . 2-166
00-276-4908 . . . . . . . 2-97 00-281-4969 . . . . . . . 2-90 00-282-8470 . . . . . . . 2-23 00-287-0093 . . . . . . . 2-166
00-276-4930 . . . . . . . 2-97 00-281-5070 . . . . . . . 2-97 00-282-8902 . . . . . . . 2-35 00-287-0094 . . . . . . . 2-166
00-276-4934 . . . . . . . 2-97 00-281-5078 . . . . . . . 2-97 00-282-9504 . . . . . . . 2-23 00-287-0101 . . . . . . . 2-166
00-276-4939 . . . . . . . 2-94 00-281-5081 . . . . . . . 2-97 00-282-9526 . . . . . . . 2-51 00-287-0103 . . . . . . . 2-166
00-276-4946 . . . . . . . 2-94 00-281-5403 . . . . . . . 2-168 00-282-9603 . . . . . . . 2-43 00-287-3335 . . . . . . . 2-10
00-276-4953 . . . . . . . 2-89 00-281-6210 . . . . . . . 2-98 00-282-9646 . . . . . . . 2-12 00-287-3336 . . . . . . . 2-2
00-276-4969 . . . . . . . 2-92 00-281-6212 . . . . . . . 2-97 . . . . . . . 2-43 00-287-3337 . . . . . . . 2-2
00-276-4978 . . . . . . . 2-92 00-281-6623 . . . . . . . 2-170 00-282-9648 . . . . . . . 2-12 00-288-1951 . . . . . . . 2-47
00-276-4993 . . . . . . . 2-91 00-281-7116 . . . . . . . 2-44 . . . . . . . 2-43 00-288-1976 . . . . . . . 2-125
00-276-5867 . . . . . . . 2-97 00-281-7237 . . . . . . . 2-79 00-282-9649 . . . . . . . 2-12 00-288-2036 . . . . . . . 2-124
00-276-5876 . . . . . . . 2-97 00-281-7238 . . . . . . . 2-79 00-283-0090 . . . . . . . 2-97 00-289-0241 . . . . . . . 2-59
00-276-5954 . . . . . . . 2-91 00-281-7338 . . . . . . . 2-73 00-283-0169 . . . . . . . 2-39 00-289-0431 . . . . . . . 2-166
00-276-6056 . . . . . . . 2-91 00-281-7578 . . . . . . . 2-73 00-283-1909 . . . . . . . 2-34 00-289-1820 . . . . . . . 2-166
00-276-6091 . . . . . . . 2-91 00-281-7948 . . . . . . . 2-73 00-283-4619 . . . . . . . 2-63 00-289-3019 . . . . . . . 2-166
00-276-6100 . . . . . . . 2-91 00-281-8477 . . . . . . . 2-42 00-285-1459 . . . . . . . 2-181 00-289-3070 . . . . . . . 2-166
00-276-6126 . . . . . . . 2-152 00-281-8527 . . . . . . . 2-23 00-285-1460 . . . . . . . 2-181 00-290-0957 . . . . . . . 2-141
00-276-6228 . . . . . . . 2-91 00-281-8875 . . . . . . . 2-23 00-285-1836 . . . . . . . 2-139 00-290-1056 . . . . . . . 2-103
00-276-6343 . . . . . . . 2-91 00-281-9892 . . . . . . . 2-134 00-285-1838 . . . . . . . 2-139 00-290-2907 . . . . . . . 2-97
00-276-6627 . . . . . . . 2-73 00-282-0135 . . . . . . . 2-23 00-285-1839 . . . . . . . 2-139 00-290-3046 . . . . . . . 2-29
00-276-6766 . . . . . . . 2-80 00-282-1633 . . . . . . . 2-170 00-285-1870 . . . . . . . 2-139 00-290-3793 . . . . . . . 2-133
00-276-9512 . . . . . . . 2-115 00-282-1830 . . . . . . . 2-170 00-285-1871 . . . . . . . 2-139 00-290-3976 . . . . . . . 2-93
00-277-7440 . . . . . . . 2-9 00-282-1831 . . . . . . . 2-170 00-285-1872 . . . . . . . 2-139 00-290-4138 . . . . . . . 2-141
00-277-7559 . . . . . . . 2-133 00-282-1901 . . . . . . . 2-98 00-285-2177 . . . . . . . 2-59 00-290-4140 . . . . . . . 2-141
00-277-8840 . . . . . . . 2-6 00-282-1903 . . . . . . . 2-98 00-285-2804 . . . . . . . 2-97 00-290-4141 . . . . . . . 2-141
00-278-0645 . . . . . . . 2-1 00-282-2045 . . . . . . . 2-90 00-285-5325 . . . . . . . 2-39 00-290-4143 . . . . . . . 2-141
00-278-1224 . . . . . . . 2-133 00-282-2047 . . . . . . . 2-90 00-285-5635 . . . . . . . 2-62 00-290-4478 . . . . . . . 2-141
00-278-1226 . . . . . . . 2-133 00-282-2431 . . . . . . . 2-169 00-285-6250 . . . . . . . 2-94 00-290-4480 . . . . . . . 2-141
00-278-1248 . . . . . . . 2-4 00-282-2712 . . . . . . . 2-20 00-285-6450 . . . . . . . 2-177 00-290-4489 . . . . . . . 2-141
00-279-4342 . . . . . . . 2-124 00-282-3012 . . . . . . . 2-80 00-285-6523 . . . . . . . 2-143 00-290-4494 . . . . . . . 2-141
00-279-4344 . . . . . . . 2-125 00-282-3753 . . . . . . . 2-140 00-285-7161 . . . . . . . 2-75 00-290-4497 . . . . . . . 2-141
00-279-7716 . . . . . . . 2-183 00-282-4203 . . . . . . . 2-23 00-285-7795 . . . . . . . 2-89 00-290-4504 . . . . . . . 2-141
00-279-9305 . . . . . . . 2-124 00-282-4777 . . . . . . . 2-57 00-285-7967 . . . . . . . 2-93 00-290-4505 . . . . . . . 2-141
2-201
Page Page Page Page

00-290-4506 . . . . . . . 2-141 00-291-2740 . . . . . . . 2-67 00-292-0816 . . . . . . . 2-130 00-297-6421 . . . . . . . 2-80
00-290-4511 . . . . . . . 2-141 00-291-2750 . . . . . . . 2-104 00-292-0880 . . . . . . . 2-128 00-297-6698 . . . . . . . 2-162
00-290-4518 . . . . . . . 2-141 00-291-2764 . . . . . . . 2-67 00-292-0896 . . . . . . . 2-143 00-297-6773 . . . . . . . 2-109
00-290-4520 . . . . . . . 2-141 00-291-3368 . . . . . . . 2-119 00-292-0904 . . . . . . . 2-144 00-297-7311 . . . . . . . 2-104
00-290-4521 . . . . . . . 2-141 00-291-3484 . . . . . . . 2-141 00-292-0906 . . . . . . . 2-144 00-297-7364 . . . . . . . 2-104
00-290-4532 . . . . . . . 2-134 00-291-3488 . . . . . . . 2-141 00-292-1123 . . . . . . . 2-159 00-297-7803 . . . . . . . 2-174
00-290-4545 . . . . . . . 2-134 00-291-3492 . . . . . . . 2-141 00-292-1126 . . . . . . . 2-161 00-297-8201 . . . . . . . 2-21
00-290-5853 . . . . . . . 2-129 00-291-3495 . . . . . . . 2-141 00-292-1129 . . . . . . . 2-159 00-297-8202 . . . . . . . 2-21
00-290-5854 . . . . . . . 2-129 00-291-3543 . . . . . . . 2-145 00-292-2184 . . . . . . . 2-104 00-297-8380 . . . . . . . 2-62
00-290-5855 . . . . . . . 2-129 00-291-3551 . . . . . . . 2-145 00-292-2314 . . . . . . . 2-150 00-297-8822 . . . . . . . 2-57
00-290-5858 . . . . . . . 2-129 00-291-3642 . . . . . . . 2-135 00-292-2456 . . . . . . . 2-67 00-297-8829 . . . . . . . 2-58
00-290-5859 . . . . . . . 2-129 00-291-4082 . . . . . . . 2-115 00-292-3292 . . . . . . . 2-144 00-297-8833 . . . . . . . 2-56
00-290-5863 . . . . . . . 2-129 00-291-4204 . . . . . . . 2-144 00-292-4089 . . . . . . . 2-169 00-297-8920 . . . . . . . 2-57
00-290-5865 . . . . . . . 2-129 00-291-4209 . . . . . . . 2-144 00-292-4139 . . . . . . . 2-160 00-297-9853 . . . . . . . 2-130
00-290-5869 . . . . . . . 2-129 00-291-4210 . . . . . . . 2-144 00-292-4140 . . . . . . . 2-161 00-298-0122 . . . . . . . 2-104
00-290-5871 . . . . . . . 2-129 00-291-4211 . . . . . . . 2-144 00-292-4407 . . . . . . . 2-160 00-298-0125 . . . . . . . 2-67
00-290-5872 . . . . . . . 2-129 00-291-4212 . . . . . . . 2-144 00-292-5531 . . . . . . . 2-146 00-298-0126 . . . . . . . 2-68
00-290-5873 . . . . . . . 2-129 00-291-4213 . . . . . . . 2-144 00-292-6074 . . . . . . . 2-83 00-298-1481 . . . . . . . 2-75
00-290-5878 . . . . . . . 2-129 00-291-4214 . . . . . . . 2-144 00-292-8252 . . . . . . . 2-42 00-298-1498 . . . . . . . 2-75
00-290-5879 . . . . . . . 2-129 00-291-4278 . . . . . . . 2-160 00-292-8817 . . . . . . . 2-90 00-298-1499 . . . . . . . 2-75
00-290-5883 . . . . . . . 2-129 00-291-4281 . . . . . . . 2-160 00-293-0042 . . . . . . . 2-2 00-298-2472 . . . . . . . 2-27
00-290-6163 . . . . . . . 2-91 00-291-4604 . . . . . . . 2-104 00-293-0565 . . . . . . . 2-8 00-298-2747 . . . . . . . 2-62
00-290-7156 . . . . . . . 2-12 00-291-4688 . . . . . . . 2-104 00-293-1652 . . . . . . . 2-2 00-298-5555 . . . . . . . 2-105
00-290-7249 . . . . . . . 2-135 00-291-5126 . . . . . . . 2-161 00-293-1701 . . . . . . . 2-2 00-298-5594 . . . . . . . 2-105
00-290-7263 . . . . . . . 2-135 00-291-5129 . . . . . . . 2-159 00-293-1739 . . . . . . . 2-10 00-298-6134 . . . . . . . 2-164
00-290-7860 . . . . . . . 2-104 00-291-5322 . . . . . . . 2-137 00-293-1740 . . . . . . . 2-10 00-298-6164 . . . . . . . 2-83
00-290-7998 . . . . . . . 2-104 00-291-5323 . . . . . . . 2-137 00-293-1872 . . . . . . . 2-4 00-298-6550 . . . . . . . 2-97
00-290-8231 . . . . . . . 2-95 00-291-5347 . . . . . . . 2-137 00-293-2913 . . . . . . . 2-2 00-298-6564 . . . . . . . 2-170
00-290-8232 . . . . . . . 2-95 00-291-5348 . . . . . . . 2-137 00-293-3016 . . . . . . . 2-6 00-298-7003 . . . . . . . 2-96
00-290-8233 . . . . . . . 2-95 00-291-5353 . . . . . . . 2-137 00-293-3393 . . . . . . . 2-8 00-298-7007 . . . . . . . 2-96
00-290-8235 . . . . . . . 2-95 00-291-5471 . . . . . . . 2-78 00-293-3505 . . . . . . . 2-9 00-298-7022 . . . . . . . 2-96
00-290-8243 . . . . . . . 2-133 00-291-5960 . . . . . . . 2-119 00-293-3511 . . . . . . . 2-8 00-298-7026 . . . . . . . 2-93
00-290-9102 . . . . . . . 2-161 00-291-6006 . . . . . . . 2-110 00-293-3523 . . . . . . . 2-2 00-298-9255 . . . . . . . 2-56
00-290-9384 . . . . . . . 2-119 00-291-6521 . . . . . . . 2-139 00-293-7971 . . . . . . . 2-165 00-298-9267 . . . . . . . 2-56
00-290-9558 . . . . . . . 2-113 00-291-6741 . . . . . . . 2-104 00-294-0535 . . . . . . . 2-175 00-298-9856 . . . . . . . 2-78
00-290-9884 . . . . . . . 2-105 00-291-7113 . . . . . . . 2-163 00-294-0600 . . . . . . . 2-175 00-299-1191 . . . . . . . 2-77
00-290-9933 . . . . . . . 2-104 00-291-7114 . . . . . . . 2-162 00-294-1262 . . . . . . . 2-175 00-299-2364 . . . . . . . 2-44
00-291-0195 . . . . . . . 2-94 00-291-7582 . . . . . . . 2-162 00-294-4109 . . . . . . . 2-175 00-299-2365 . . . . . . . 2-44
00-291-0197 . . . . . . . 2-94 00-291-7587 . . . . . . . 2-160 00-294-9927 . . . . . . . 2-68 00-299-2366 . . . . . . . 2-44
00-291-0289 . . . . . . . 2-91 00-291-7607 . . . . . . . 2-162 00-294-9930 . . . . . . . 2-68 00-299-2367 . . . . . . . 2-44
00-291-0293 . . . . . . . 2-91 00-291-7705 . . . . . . . 2-91 00-297-0359 . . . . . . . 2-66 00-299-2368 . . . . . . . 2-44
00-291-0302 . . . . . . . 2-91 00-291-7895 . . . . . . . 2-104 00-297-1071 . . . . . . . 2-101 00-299-2369 . . . . . . . 2-44
00-291-0320 . . . . . . . 2-98 00-291-9049 . . . . . . . 2-130 00-297-1073 . . . . . . . 2-101 00-299-2370 . . . . . . . 2-13
00-291-0365 . . . . . . . 2-97 00-291-9218 . . . . . . . 2-119 00-297-1986 . . . . . . . 2-101 . . . . . . . 2-44
00-291-0932 . . . . . . . 2-86 00-291-9360 . . . . . . . 2-93 00-297-3721 . . . . . . . 2-60 00-299-2371 . . . . . . . 2-44
00-291-1144 . . . . . . . 2-160 00-291-9366 . . . . . . . 2-91 00-297-4068 . . . . . . . 2-68 00-299-2373 . . . . . . . 2-44
00-291-1225 . . . . . . . 2-162 00-291-9597 . . . . . . . 2-101 00-297-4085 . . . . . . . 2-68 00-299-2374 . . . . . . . 2-44
00-291-1226 . . . . . . . 2-162 00-291-9598 . . . . . . . 2-101 00-297-4126 . . . . . . . 2-58 00-299-2376 . . . . . . . 2-44
00-291-1227 . . . . . . . 2-162 00-291-9737 . . . . . . . 2-67 00-297-5022 . . . . . . . 2-109 00-299-2377 . . . . . . . 2-44
00-291-1229 . . . . . . . 2-161 00-291-9750 . . . . . . . 2-67 00-297-5024 . . . . . . . 2-106 00-299-2379 . . . . . . . 2-13
00-291-1231 . . . . . . . 2-162 00-292-0012 . . . . . . . 2-101 00-297-5169 . . . . . . . 2-115 00-299-2380 . . . . . . . 2-44
00-291-2503 . . . . . . . 2-162 00-292-0492 . . . . . . . 2-130 00-297-6117 . . . . . . . 2-104 00-299-2381 . . . . . . . 2-44
00-291-2739 . . . . . . . 2-68 00-292-0808 . . . . . . . 2-130 00-297-6119 . . . . . . . 2-104 00-299-2382 . . . . . . . 2-44
2-202
Page Page Page Page

00-299-2392 . . . . . . . 2-44 00-334-6815 . . . . . . . 2-107 00-363-7573 . . . . . . . 2-5 00-392-0742 . . . . . . . 2-40
00-299-2393 . . . . . . . 2-44 00-334-7180 . . . . . . . 2-175 00-363-8051 . . . . . . . 2-37 00-392-2045 . . . . . . . 2-68
00-299-2756 . . . . . . . 2-43 00-336-2152 . . . . . . . 2-34 00-363-8059 . . . . . . . 2-51 00-394-8032 . . . . . . . 2-80
00-299-2757 . . . . . . . 2-43 00-336-5557 . . . . . . . 2-167 00-364-3550 . . . . . . . 2-109 00-395-1288 . . . . . . . 2-105
00-299-2758 . . . . . . . 2-43 00-336-5565 . . . . . . . 2-167 00-364-8103 . . . . . . . 2-121 00-395-2969 . . . . . . . 2-135
00-299-2771 . . . . . . . 2-43 00-337-8329 . . . . . . . 2-69 00-364-9676 . . . . . . . 2-168 00-395-3356 . . . . . . . 2-18
00-299-2772 . . . . . . . 2-44 00-338-1302 . . . . . . . 2-123 00-364-9798 . . . . . . . 2-130 00-395-3529 . . . . . . . 2-128
00-299-2773 . . . . . . . 2-44 00-338-1382 . . . . . . . 2-123 00-364-9807 . . . . . . . 2-168 00-395-6494 . . . . . . . 2-84
00-299-2820 . . . . . . . 2-43 00-338-1440 . . . . . . . 2-123 00-366-1393 . . . . . . . 2-150 00-397-4485 . . . . . . . 2-68
00-299-2827 . . . . . . . 2-43 00-338-1441 . . . . . . . 2-123 00-366-3254 . . . . . . . 2-80 00-398-7242 . . . . . . . 2-175
00-299-2837 . . . . . . . 2-43 00-338-3227 . . . . . . . 2-18 00-366-3367 . . . . . . . 2-161 00-398-9396 . . . . . . . 2-138
00-299-2838 . . . . . . . 2-43 00-338-3254 . . . . . . . 2-18 00-366-3375 . . . . . . . 2-161 00-398-9458 . . . . . . . 2-173
00-303-0091 . . . . . . . 2-120 00-338-3256 . . . . . . . 2-18 00-366-3386 . . . . . . . 2-160 00-399-3715 . . . . . . . 2-4
00-303-1060 . . . . . . . 2-84 00-338-3257 . . . . . . . 2-18 00-367-1456 . . . . . . . 2-55 00-400-5503 . . . . . . . 2-57
00-304-9253 . . . . . . . 2-65 00-338-3269 . . . . . . . 2-18 00-367-4374 . . . . . . . 2-121 00-402-5748 . . . . . . . 2-20
00-304-9669 . . . . . . . 2-66 00-338-4001 . . . . . . . 2-174 00-367-7299 . . . . . . . 2-175 00-402-5749 . . . . . . . 2-20
00-306-1128 . . . . . . . 2-114 00-338-4028 . . . . . . . 2-103 00-369-2714 . . . . . . . 2-96 00-402-5753 . . . . . . . 2-41
00-306-3167 . . . . . . . 2-65 00-339-3348 . . . . . . . 2-170 00-369-2716 . . . . . . . 2-96 00-402-5852 . . . . . . . 2-168
00-307-0778 . . . . . . . 2-138 00-339-5319 . . . . . . . 2-110 00-369-2721 . . . . . . . 2-90 00-402-5885 . . . . . . . 2-80
00-307-8538 . . . . . . . 2-163 00-341-2477 . . . . . . . 2-154 00-369-4940 . . . . . . . 2-142 00-404-1473 . . . . . . . 2-121
00-308-3519 . . . . . . . 2-41 00-342-4330 . . . . . . . 2-165 00-369-4943 . . . . . . . 2-140 00-405-5304 . . . . . . . 2-30
00-308-8897 . . . . . . . 2-159 00-343-1035 . . . . . . . 2-124 00-369-4952 . . . . . . . 2-146 00-405-5412 . . . . . . . 2-78
00-308-8909 . . . . . . . 2-159 00-343-7835 . . . . . . . 2-160 00-369-5013 . . . . . . . 2-138 00-406-5178 . . . . . . . 2-20
00-308-8913 . . . . . . . 2-159 00-343-8376 . . . . . . . 2-162 00-369-7741 . . . . . . . 2-115 00-406-5245 . . . . . . . 2-109
00-308-9091 . . . . . . . 2-162 00-343-8378 . . . . . . . 2-164 00-370-0359 . . . . . . . 2-171 00-406-5478 . . . . . . . 2-90
00-310-2142 . . . . . . . 2-139 00-347-2591 . . . . . . . 2-10 00-370-0635 . . . . . . . 2-101 00-406-6496 . . . . . . . 2-143
00-310-2143 . . . . . . . 2-139 00-347-2613 . . . . . . . 2-10 00-371-8105 . . . . . . . 2-139 00-406-7240 . . . . . . . 2-62
00-310-2147 . . . . . . . 2-139 00-347-7828 . . . . . . . 2-17 00-372-0871 . . . . . . . 2-79 00-406-9219 . . . . . . . 2-20
00-311-9327 . . . . . . . 2-18 00-347-8294 . . . . . . . 2-18 00-372-8344 . . . . . . . 2-18 00-406-9224 . . . . . . . 2-20
00-314-7079 . . . . . . . 2-159 00-349-1908 . . . . . . . 2-166 00-372-8629 . . . . . . . 2-137 00-407-9566 . . . . . . . 2-69
00-314-7089 . . . . . . . 2-163 00-349-8115 . . . . . . . 2-80 00-373-0764 . . . . . . . 2-73 00-408-3231 . . . . . . . 2-161
00-316-3573 . . . . . . . 2-160 00-350-2796 . . . . . . . 2-65 00-373-4954 . . . . . . . 2-64 00-408-6073 . . . . . . . 2-84
00-316-4242 . . . . . . . 2-160 00-351-4581 . . . . . . . 2-153 00-374-3251 . . . . . . . 2-105 00-408-9928 . . . . . . . 2-84
00-316-8107 . . . . . . . 2-18 00-352-8292 . . . . . . . 2-139 00-374-3252 . . . . . . . 2-111 00-409-1763 . . . . . . . 2-66
00-316-8140 . . . . . . . 2-18 00-354-4919 . . . . . . . 2-18 00-375-6986 . . . . . . . 2-103 00-409-1865 . . . . . . . 2-94
00-317-4976 . . . . . . . 2-67 00-354-5143 . . . . . . . 2-18 00-375-6989 . . . . . . . 2-103 00-409-3246 . . . . . . . 2-144
00-318-9298 . . . . . . . 2-164 00-354-5148 . . . . . . . 2-18 00-375-7417 . . . . . . . 2-34 00-409-3247 . . . . . . . 2-144
00-318-9710 . . . . . . . 2-80 00-354-5151 . . . . . . . 2-18 00-376-1137 . . . . . . . 2-160 00-409-4265 . . . . . . . 2-184
00-320-2563 . . . . . . . 2-111 00-354-5155 . . . . . . . 2-18 00-376-8653 . . . . . . . 2-127 00-409-6841 . . . . . . . 2-84
00-321-4269 . . . . . . . 2-89 00-355-2033 . . . . . . . 2-168 00-377-0921 . . . . . . . 2-124 00-410-6607 . . . . . . . 2-7
00-321-9962 . . . . . . . 2-119 00-355-4873 . . . . . . . 2-52 00-377-2188 . . . . . . . 2-106 00-410-6648 . . . . . . . 2-77
00-322-6397 . . . . . . . 2-120 00-355-4874 . . . . . . . 2-52 00-377-6525 . . . . . . . 2-6 00-410-6675 . . . . . . . 2-78
00-324-6971 . . . . . . . 2-157 00-355-4875 . . . . . . . 2-52 00-379-1727 . . . . . . . 2-175 00-411-4385 . . . . . . . 2-62
00-324-9158 . . . . . . . 2-135 00-357-2086 . . . . . . . 2-171 00-380-0437 . . . . . . . 2-67 00-411-9439 . . . . . . . 2-85
00-324-9249 . . . . . . . 2-18 . . . . . . . 2-172 00-380-0438 . . . . . . . 2-67 00-412-5635 . . . . . . . 2-175
00-325-2461 . . . . . . . 2-22 00-357-5951 . . . . . . . 2-3 00-381-3123 . . . . . . . 2-78 00-412-5685 . . . . . . . 2-29
00-329-2136 . . . . . . . 2-138 00-358-5711 . . . . . . . 2-137 00-382-1710 . . . . . . . 2-136 00-412-7558 . . . . . . . 2-172
00-330-3307 . . . . . . . 2-120 00-359-1250 . . . . . . . 2-52 00-382-7272 . . . . . . . 2-80 00-412-9787 . . . . . . . 2-20
00-331-2365 . . . . . . . 2-168 00-359-3654 . . . . . . . 2-76 00-383-8661 . . . . . . . 2-111 00-412-9789 . . . . . . . 2-20
00-331-4774 . . . . . . . 2-141 00-359-6844 . . . . . . . 2-89 00-390-0727 . . . . . . . 2-133 00-413-4000 . . . . . . . 2-26
00-333-6426 . . . . . . . 2-136 00-362-5100 . . . . . . . 2-8 00-390-5446 . . . . . . . 2-6 00-413-4520 . . . . . . . 2-126
00-334-0447 . . . . . . . 2-68 00-362-7173 . . . . . . . 2-175 00-390-5610 . . . . . . . 2-7 00-413-4734 . . . . . . . 2-125
00-334-5817 . . . . . . . 2-144 00-362-7498 . . . . . . . 2-73 00-391-9846 . . . . . . . 2-61 00-414-4738 . . . . . . . 2-96
2-203
Page Page Page Page

00-414-4871 . . . . . . . 2-98 00-432-4226 . . . . . . . 2-103 00-456-2430 . . . . . . . 2-12 00-490-1678 . . . . . . . 2-146
00-415-2138 . . . . . . . 2-14 00-432-4836 . . . . . . . 2-155 00-456-2633 . . . . . . . 2-55 00-490-2237 . . . . . . . 2-85
00-415-2186 . . . . . . . 2-56 00-432-7954 . . . . . . . 2-32 00-458-0264 . . . . . . . 2-173 00-491-5895 . . . . . . . 2-66
00-416-8520 . . . . . . . 2-173 00-432-7956 . . . . . . . 2-32 00-458-2233 . . . . . . . 2-45 00-491-9441 . . . . . . . 2-28
00-417-1683 . . . . . . . 2-161 00-432-9235 . . . . . . . 2-6 00-460-3042 . . . . . . . 2-26 00-492-2949 . . . . . . . 2-11
00-418-2893 . . . . . . . 2-170 00-432-9810 . . . . . . . 2-93 00-460-4882 . . . . . . . 2-175 00-493-4101 . . . . . . . 2-84
00-419-2969 . . . . . . . 2-126 00-432-9964 . . . . . . . 2-90 00-460-8310 . . . . . . . 2-118 00-493-4103 . . . . . . . 2-84
00-419-4045 . . . . . . . 2-155 00-433-3711 . . . . . . . 2-32 00-463-0225 . . . . . . . 2-118 00-493-5835 . . . . . . . 2-135
00-419-4471 . . . . . . . 2-97 00-434-7510 . . . . . . . 2-168 00-463-0327 . . . . . . . 2-118 00-493-9617 . . . . . . . 2-172
00-419-6689 . . . . . . . 2-92 00-435-9015 . . . . . . . 2-110 00-464-7132 . . . . . . . 2-79 00-493-9619 . . . . . . . 2-172
00-419-6690 . . . . . . . 2-92 00-436-3290 . . . . . . . 2-62 00-466-2371 . . . . . . . 2-174 00-494-1737 . . . . . . . 2-1
00-420-1080 . . . . . . . 2-58 00-436-4415 . . . . . . . 2-19 00-466-3936 . . . . . . . 2-134 00-494-1738 . . . . . . . 2-1
00-420-1765 . . . . . . . 2-58 00-437-5261 . . . . . . . 2-118 00-467-0871 . . . . . . . 2-41 00-494-1739 . . . . . . . 2-1
00-420-5918 . . . . . . . 2-119 00-437-6461 . . . . . . . 2-135 00-467-3615 . . . . . . . 2-125 00-494-1774 . . . . . . . 2-3
00-420-5980 . . . . . . . 2-160 00-438-6987 . . . . . . . 2-74 00-469-3917 . . . . . . . 2-118 00-494-1776 . . . . . . . 2-3
00-421-3818 . . . . . . . 2-184 00-438-9479 . . . . . . . 2-155 00-469-4023 . . . . . . . 2-175 00-494-7430 . . . . . . . 2-146
00-421-4848 . . . . . . . 2-104 00-440-3513 . . . . . . . 2-30 00-469-8334 . . . . . . . 2-104 00-494-7597 . . . . . . . 2-135
00-421-7853 . . . . . . . 2-35 00-440-4948 . . . . . . . 2-118 00-470-1956 . . . . . . . 2-159 00-496-5832 . . . . . . . 2-135
00-421-9382 . . . . . . . 2-144 00-440-5357 . . . . . . . 2-67 00-470-5311 . . . . . . . 2-89 00-496-8922 . . . . . . . 2-57
. . . . . . . 2-144 00-440-5745 . . . . . . . 2-40 00-470-5954 . . . . . . . 2-65 00-497-0697 . . . . . . . 2-99
00-421-9387 . . . . . . . 2-121 00-441-5473 . . . . . . . 2-66 00-471-0886 . . . . . . . 2-140 00-497-0724 . . . . . . . 2-99
00-422-2535 . . . . . . . 2-104 00-442-5845 . . . . . . . 2-171 00-471-5606 . . . . . . . 2-172 00-497-0726 . . . . . . . 2-99
00-422-2543 . . . . . . . 2-43 00-443-5895 . . . . . . . 2-19 00-472-5163 . . . . . . . 2-66 00-497-0756 . . . . . . . 2-99
00-423-4790 . . . . . . . 2-66 00-444-7680 . . . . . . . 2-184 00-472-5252 . . . . . . . 2-32 00-497-0770 . . . . . . . 2-99
00-423-6781 . . . . . . . 2-95 00-445-3244 . . . . . . . 2-170 00-472-6954 . . . . . . . 2-118 00-497-1247 . . . . . . . 2-119
00-424-8923 . . . . . . . 2-49 00-445-8316 . . . . . . . 2-45 00-473-1076 . . . . . . . 2-171 00-497-3221 . . . . . . . 2-58
00-425-0649 . . . . . . . 2-123 00-445-8617 . . . . . . . 2-166 00-473-1090 . . . . . . . 2-34 00-497-3889 . . . . . . . 2-61
00-425-2080 . . . . . . . 2-119 00-446-3348 . . . . . . . 2-110 00-473-3199 . . . . . . . 2-143 00-497-3895 . . . . . . . 2-61
00-425-5142 . . . . . . . 2-106 00-446-3377 . . . . . . . 2-162 00-473-4011 . . . . . . . 2-34 00-497-7311 . . . . . . . 2-36
00-426-2690 . . . . . . . 2-49 00-446-6292 . . . . . . . 2-162 00-473-9350 . . . . . . . 2-5 00-497-7401 . . . . . . . 2-32
00-426-4916 . . . . . . . 2-85 00-446-9304 . . . . . . . 2-43 00-474-6400 . . . . . . . 2-4 00-497-7419 . . . . . . . 2-44
00-427-6552 . . . . . . . 2-62 00-446-9390 . . . . . . . 2-45 00-476-2052 . . . . . . . 2-174 00-498-5733 . . . . . . . 2-124
00-430-7321 . . . . . . . 2-173 00-447-5205 . . . . . . . 2-51 00-476-7475 . . . . . . . 2-12 00-498-5755 . . . . . . . 2-124
00-431-0618 . . . . . . . 2-60 00-448-3624 . . . . . . . 2-4 00-477-6071 . . . . . . . 2-185 00-498-5806 . . . . . . . 2-124
00-431-5926 . . . . . . . 2-12 00-448-6456 . . . . . . . 2-28 00-477-6768 . . . . . . . 2-57 00-499-0073 . . . . . . . 2-134
00-431-6773 . . . . . . . 2-63 00-449-0385 . . . . . . . 2-45 00-478-0296 . . . . . . . 2-18 00-500-1575 . . . . . . . 2-70
00-431-7098 . . . . . . . 2-74 00-449-2378 . . . . . . . 2-62 00-478-9354 . . . . . . . 2-174 00-500-3523 . . . . . . . 2-59
00-432-3152 . . . . . . . 2-171 00-449-2797 . . . . . . . 2-90 00-479-9197 . . . . . . . 2-141 00-500-9394 . . . . . . . 2-28
00-432-3584 . . . . . . . 2-170 00-449-2945 . . . . . . . 2-76 00-481-8934 . . . . . . . 2-135 00-501-3194 . . . . . . . 2-159
00-432-3846 . . . . . . . 2-160 00-449-2967 . . . . . . . 2-92 00-482-4498 . . . . . . . 2-156 00-501-3199 . . . . . . . 2-80
00-432-4163 . . . . . . . 2-32 00-449-3026 . . . . . . . 2-95 00-482-7963 . . . . . . . 2-118 00-501-3200 . . . . . . . 2-160
00-432-4164 . . . . . . . 2-32 00-449-7014 . . . . . . . 2-4 00-482-8500 . . . . . . . 2-25 00-501-3203 . . . . . . . 2-80
00-432-4165 . . . . . . . 2-32 00-450-6920 . . . . . . . 2-8 00-483-1451 . . . . . . . 2-34 00-501-3204 . . . . . . . 2-159
00-432-4166 . . . . . . . 2-32 00-451-9029 . . . . . . . 2-70 00-483-2788 . . . . . . . 2-79 00-501-3207 . . . . . . . 2-80
00-432-4169 . . . . . . . 2-32 00-452-2160 . . . . . . . 2-29 00-483-8790 . . . . . . . 2-61 00-501-3208 . . . . . . . 2-160
00-432-4170 . . . . . . . 2-32 00-453-6278 . . . . . . . 2-77 00-483-8792 . . . . . . . 2-61 00-501-3209 . . . . . . . 2-79
00-432-4171 . . . . . . . 2-32 00-454-1513 . . . . . . . 2-64 00-484-5478 . . . . . . . 2-92 00-501-3210 . . . . . . . 2-79
00-432-4172 . . . . . . . 2-32 00-454-5156 . . . . . . . 2-84 00-484-6277 . . . . . . . 2-104 00-501-3211 . . . . . . . 2-79
00-432-4173 . . . . . . . 2-32 00-455-2588 . . . . . . . 2-169 00-486-0957 . . . . . . . 2-133 00-501-3212 . . . . . . . 2-76
00-432-4202 . . . . . . . 2-32 00-455-2706 . . . . . . . 2-29 00-486-7954 . . . . . . . 2-92 00-501-3215 . . . . . . . 2-81
00-432-4203 . . . . . . . 2-32 00-455-6840 . . . . . . . 2-28 00-487-4676 . . . . . . . 2-126 00-501-3217 . . . . . . . 2-159
00-432-4205 . . . . . . . 2-32 00-455-6881 . . . . . . . 2-64 00-487-4687 . . . . . . . 2-126 00-501-3516 . . . . . . . 2-159
00-432-4210 . . . . . . . 2-32 00-455-6922 . . . . . . . 2-163 00-489-1050 . . . . . . . 2-97 00-501-3668 . . . . . . . 2-79
2-204
Page Page Page Page

00-502-0106 . . . . . . . 2-67 00-515-9371 . . . . . . . 2-65 00-530-2253 . . . . . . . 2-126 00-542-1984 . . . . . . . 2-129
00-503-4264 . . . . . . . 2-153 00-515-9962 . . . . . . . 2-69 00-530-2254 . . . . . . . 2-126 00-542-3449 . . . . . . . 2-184
00-503-5689 . . . . . . . 2-17 00-516-0021 . . . . . . . 2-181 00-530-2259 . . . . . . . 2-126 00-542-4466 . . . . . . . 2-128
00-503-5894 . . . . . . . 2-161 00-516-0022 . . . . . . . 2-181 00-530-2762 . . . . . . . 2-126 00-542-4602 . . . . . . . 2-3
00-503-5897 . . . . . . . 2-92 00-516-0038 . . . . . . . 2-181 00-530-3526 . . . . . . . 2-101 00-543-0789 . . . . . . . 2-156
00-505-3039 . . . . . . . 2-17 00-516-3356 . . . . . . . 2-7 00-530-4934 . . . . . . . 2-169 00-543-2023 . . . . . . . 2-24
00-505-3217 . . . . . . . 2-18 00-517-6493 . . . . . . . 2-46 00-530-6777 . . . . . . . 2-169 00-543-2024 . . . . . . . 2-24
00-505-3441 . . . . . . . 2-17 00-517-8096 . . . . . . . 2-5 00-530-6833 . . . . . . . 2-136 00-543-2245 . . . . . . . 2-44
00-505-3442 . . . . . . . 2-17 00-517-8097 . . . . . . . 2-5 00-530-6990 . . . . . . . 2-120 00-543-2410 . . . . . . . 2-69
00-505-3444 . . . . . . . 2-17 00-518-1850 . . . . . . . 2-155 00-530-7953 . . . . . . . 2-169 00-543-2418 . . . . . . . 2-97
00-505-3923 . . . . . . . 2-162 00-518-6285 . . . . . . . 2-49 00-530-7968 . . . . . . . 2-170 00-543-2419 . . . . . . . 2-14
00-505-4056 . . . . . . . 2-17 00-518-6287 . . . . . . . 2-48 00-530-8810 . . . . . . . 2-143 00-543-2426 . . . . . . . 2-68
00-505-4798 . . . . . . . 2-93 00-519-1852 . . . . . . . 2-181 00-530-9134 . . . . . . . 2-11 00-543-2500 . . . . . . . 2-66
00-507-4104 . . . . . . . 2-184 00-519-3120 . . . . . . . 2-155 00-530-9136 . . . . . . . 2-11 00-543-2732 . . . . . . . 2-24
00-508-2208 . . . . . . . 2-154 00-519-6630 . . . . . . . 2-61 00-530-9927 . . . . . . . 2-60 00-543-2739 . . . . . . . 2-69
00-508-7669 . . . . . . . 2-25 00-519-7875 . . . . . . . 2-85 00-530-9963 . . . . . . . 2-70 00-543-2740 . . . . . . . 2-69
00-508-7710 . . . . . . . 2-26 00-522-4315 . . . . . . . 2-174 00-531-0137 . . . . . . . 2-35 00-543-2752 . . . . . . . 2-24
00-508-8367 . . . . . . . 2-96 00-523-2860 . . . . . . . 2-41 00-531-0298 . . . . . . . 2-24 00-543-3032 . . . . . . . 2-133
00-508-8376 . . . . . . . 2-96 00-523-8813 . . . . . . . 2-168 00-531-1053 . . . . . . . 2-53 00-543-3033 . . . . . . . 2-79
00-508-8377 . . . . . . . 2-96 00-524-7660 . . . . . . . 2-80 00-531-1055 . . . . . . . 2-53 00-543-3388 . . . . . . . 2-168
00-508-8426 . . . . . . . 2-95 00-525-2028 . . . . . . . 2-62 00-531-1056 . . . . . . . 2-53 00-543-3410 . . . . . . . 2-94
00-508-8428 . . . . . . . 2-95 00-526-1833 . . . . . . . 2-172 00-531-1297 . . . . . . . 2-46 00-543-3574 . . . . . . . 2-143
00-508-8848 . . . . . . . 2-96 00-527-0604 . . . . . . . 2-78 00-531-1813 . . . . . . . 2-66 00-543-3575 . . . . . . . 2-143
00-508-9744 . . . . . . . 2-18 00-527-1405 . . . . . . . 2-163 00-531-6487 . . . . . . . 2-172 00-543-3600 . . . . . . . 2-152
00-509-7990 . . . . . . . 2-17 00-527-2199 . . . . . . . 2-162 00-531-7263 . . . . . . . 2-80 00-543-3696 . . . . . . . 2-75
00-510-6236 . . . . . . . 2-63 00-527-2322 . . . . . . . 2-160 00-531-7881 . . . . . . . 2-78 00-543-3931 . . . . . . . 2-136
00-510-7823 . . . . . . . 2-84 00-527-2366 . . . . . . . 2-133 00-531-7885 . . . . . . . 2-74 00-543-3934 . . . . . . . 2-136
00-512-4910 . . . . . . . 2-113 00-527-2368 . . . . . . . 2-133 00-531-8502 . . . . . . . 2-81 00-543-3981 . . . . . . . 2-171
00-512-7013 . . . . . . . 2-93 00-527-2436 . . . . . . . 2-159 00-531-8979 . . . . . . . 2-42 00-543-4194 . . . . . . . 2-73
00-514-2660 . . . . . . . 2-77 00-527-3634 . . . . . . . 2-70 00-531-9108 . . . . . . . 2-12 00-543-4385 . . . . . . . 2-69
00-514-2782 . . . . . . . 2-143 00-527-4424 . . . . . . . 2-18 00-531-9170 . . . . . . . 2-143 00-543-4405 . . . . . . . 2-44
00-514-3394 . . . . . . . 2-66 00-527-4426 . . . . . . . 2-20 00-531-9514 . . . . . . . 2-65 00-543-4470 . . . . . . . 2-165
00-514-5436 . . . . . . . 2-17 00-527-4509 . . . . . . . 2-68 00-531-9515 . . . . . . . 2-65 00-543-4625 . . . . . . . 2-47
00-514-6014 . . . . . . . 2-101 00-527-4569 . . . . . . . 2-17 00-532-1898 . . . . . . . 2-163 00-543-4644 . . . . . . . 2-17
00-514-6674 . . . . . . . 2-69 00-527-5555 . . . . . . . 2-11 00-533-5446 . . . . . . . 2-33 00-543-4662 . . . . . . . 2-24
00-514-7388 . . . . . . . 2-31 00-527-7322 . . . . . . . 2-130 00-536-4473 . . . . . . . 2-133 00-543-4717 . . . . . . . 2-59
00-514-7499 . . . . . . . 2-17 00-527-7493 . . . . . . . 2-117 00-537-3888 . . . . . . . 2-120 00-543-4718 . . . . . . . 2-11
00-514-7506 . . . . . . . 2-24 00-527-7495 . . . . . . . 2-117 00-537-3923 . . . . . . . 2-121 00-543-4755 . . . . . . . 2-48
00-514-9171 . . . . . . . 2-174 00-527-7496 . . . . . . . 2-117 00-537-3927 . . . . . . . 2-121 00-543-5041 . . . . . . . 2-58
00-515-0076 . . . . . . . 2-85 00-527-7498 . . . . . . . 2-117 00-537-3929 . . . . . . . 2-120 00-543-5058 . . . . . . . 2-24
00-515-0525 . . . . . . . 2-135 00-527-7499 . . . . . . . 2-117 00-537-3940 . . . . . . . 2-121 00-543-5060 . . . . . . . 2-69
. . . . . . . 2-135 00-527-7502 . . . . . . . 2-117 00-537-3944 . . . . . . . 2-121 00-543-5391 . . . . . . . 2-33
00-515-0595 . . . . . . . 2-137 00-527-7503 . . . . . . . 2-117 00-537-8198 . . . . . . . 2-46 00-543-5400 . . . . . . . 2-33
00-515-0662 . . . . . . . 2-164 00-527-7505 . . . . . . . 2-117 00-538-7331 . . . . . . . 2-158 00-543-5425 . . . . . . . 2-33
00-515-7205 . . . . . . . 2-26 00-527-9087 . . . . . . . 2-129 00-538-7797 . . . . . . . 2-43 00-543-5468 . . . . . . . 2-43
00-515-7449 . . . . . . . 2-65 00-528-5129 . . . . . . . 2-154 00-539-6313 . . . . . . . 2-121 00-543-5480 . . . . . . . 2-43
. . . . . . . 2-65 00-528-5236 . . . . . . . 2-123 00-540-2560 . . . . . . . 2-9 00-543-5481 . . . . . . . 2-43
00-515-7460 . . . . . . . 2-21 00-528-5892 . . . . . . . 2-70 00-540-2973 . . . . . . . 2-2 00-543-5482 . . . . . . . 2-43
00-515-8058 . . . . . . . 2-65 00-530-0327 . . . . . . . 2-48 00-540-3513 . . . . . . . 2-9 00-543-5562 . . . . . . . 2-45
00-515-8064 . . . . . . . 2-41 00-530-0680 . . . . . . . 2-117 00-540-4155 . . . . . . . 2-58 00-543-5563 . . . . . . . 2-45
00-515-8772 . . . . . . . 2-61 00-530-0681 . . . . . . . 2-117 00-542-0920 . . . . . . . 2-127 00-543-5564 . . . . . . . 2-45
00-515-9155 . . . . . . . 2-97 00-530-0683 . . . . . . . 2-117 00-542-0926 . . . . . . . 2-106 00-543-5569 . . . . . . . 2-45
00-515-9254 . . . . . . . 2-59 00-530-0685 . . . . . . . 2-117 00-542-0927 . . . . . . . 2-107 00-543-5570 . . . . . . . 2-45
2-205
Page Page Page Page

00-543-5571 . . . . . . . 2-45 00-550-5054 . . . . . . . 2-66 00-554-7085 . . . . . . . 2-9 00-576-1316 . . . . . . . 2-58
00-543-5572 . . . . . . . 2-45 00-550-6742 . . . . . . . 2-126 00-554-7087 . . . . . . . 2-9 00-576-1632 . . . . . . . 2-45
00-543-5573 . . . . . . . 2-45 00-550-6825 . . . . . . . 2-178 00-554-7134 . . . . . . . 2-1 00-576-1687 . . . . . . . 2-152
00-543-5574 . . . . . . . 2-45 00-550-6866 . . . . . . . 2-178 00-555-7993 . . . . . . . 2-6 00-576-1689 . . . . . . . 2-152
00-543-5579 . . . . . . . 2-45 00-550-8112 . . . . . . . 2-73 00-556-0145 . . . . . . . 2-154 00-576-1749 . . . . . . . 2-133
00-543-5580 . . . . . . . 2-45 00-550-8485 . . . . . . . 2-134 00-556-0151 . . . . . . . 2-156 00-576-1750 . . . . . . . 2-133
00-543-5581 . . . . . . . 2-45 00-550-8599 . . . . . . . 2-168 00-556-7506 . . . . . . . 2-123 00-576-2124 . . . . . . . 2-11
00-543-5589 . . . . . . . 2-45 00-550-9281 . . . . . . . 2-48 00-556-7513 . . . . . . . 2-123 00-576-2544 . . . . . . . 2-66
00-543-5591 . . . . . . . 2-45 00-550-9474 . . . . . . . 2-18 00-558-0540 . . . . . . . 2-108 00-576-2623 . . . . . . . 2-43
00-543-5604 . . . . . . . 2-45 00-550-9523 . . . . . . . 2-34 00-558-0541 . . . . . . . 2-174 00-576-2812 . . . . . . . 2-17
00-543-5606 . . . . . . . 2-43 00-550-9596 . . . . . . . 2-97 00-558-1785 . . . . . . . 2-89 00-576-2823 . . . . . . . 2-162
00-543-5733 . . . . . . . 2-26 00-551-0046 . . . . . . . 2-21 00-558-2585 . . . . . . . 2-20 00-576-5387 . . . . . . . 2-149
00-543-5794 . . . . . . . 2-16 00-551-0156 . . . . . . . 2-35 00-558-4887 . . . . . . . 2-24 00-576-5417 . . . . . . . 2-12
00-543-5798 . . . . . . . 2-16 00-551-1493 . . . . . . . 2-110 00-558-5426 . . . . . . . 2-11 00-576-5745 . . . . . . . 2-12
00-543-5799 . . . . . . . 2-16 00-551-3476 . . . . . . . 2-184 00-558-5928 . . . . . . . 2-149 00-576-5746 . . . . . . . 2-11
00-543-5828 . . . . . . . 2-11 00-551-3480 . . . . . . . 2-183 00-558-5929 . . . . . . . 2-149 00-576-5752 . . . . . . . 2-69
00-543-5832 . . . . . . . 2-35 00-551-4842 . . . . . . . 2-18 00-558-7182 . . . . . . . 2-11 00-576-5913 . . . . . . . 2-48
00-543-5923 . . . . . . . 2-23 00-551-4845 . . . . . . . 2-41 00-558-7358 . . . . . . . 2-11 00-576-6617 . . . . . . . 2-21
00-543-5933 . . . . . . . 2-69 00-551-5593 . . . . . . . 2-48 00-558-7455 . . . . . . . 2-62 00-576-7266 . . . . . . . 2-35
00-543-5945 . . . . . . . 2-15 00-551-5662 . . . . . . . 2-48 00-558-7456 . . . . . . . 2-62 00-576-7651 . . . . . . . 2-18
00-543-7083 . . . . . . . 2-127 00-551-5663 . . . . . . . 2-48 00-558-8149 . . . . . . . 2-18 00-576-7809 . . . . . . . 2-23
00-543-7085 . . . . . . . 2-126 00-551-5664 . . . . . . . 2-48 00-558-8364 . . . . . . . 2-11 00-576-8337 . . . . . . . 2-130
00-543-7087 . . . . . . . 2-126 00-551-6146 . . . . . . . 2-138 00-558-8365 . . . . . . . 2-12 00-576-9634 . . . . . . . 2-151
00-543-7088 . . . . . . . 2-126 00-551-6709 . . . . . . . 2-18 00-558-8826 . . . . . . . 2-141 00-576-9877 . . . . . . . 2-80
00-543-7089 . . . . . . . 2-126 00-551-6713 . . . . . . . 2-18 00-558-9323 . . . . . . . 2-40 00-576-9986 . . . . . . . 2-135
00-543-7090 . . . . . . . 2-126 00-551-6716 . . . . . . . 2-17 00-558-9326 . . . . . . . 2-40 00-577-5434 . . . . . . . 2-31
00-543-7092 . . . . . . . 2-127 00-551-6903 . . . . . . . 2-140 00-559-0070 . . . . . . . 2-69 00-579-0079 . . . . . . . 2-69
00-543-7093 . . . . . . . 2-126 00-551-6982 . . . . . . . 2-48 00-559-0334 . . . . . . . 2-92 00-579-0093 . . . . . . . 2-35
00-544-4505 . . . . . . . 2-98 00-551-6985 . . . . . . . 2-48 00-559-2537 . . . . . . . 2-115 00-579-1210 . . . . . . . 2-156
00-545-5615 . . . . . . . 2-10 00-551-7507 . . . . . . . 2-159 00-559-8145 . . . . . . . 2-24 00-579-1531 . . . . . . . 2-137
00-548-4787 . . . . . . . 2-76 00-551-8001 . . . . . . . 2-83 00-559-8586 . . . . . . . 2-118 00-579-1871 . . . . . . . 2-65
00-549-3628 . . . . . . . 2-121 00-551-8089 . . . . . . . 2-65 00-559-8943 . . . . . . . 2-154 00-579-2047 . . . . . . . 2-174
00-549-8049 . . . . . . . 2-130 00-551-8151 . . . . . . . 2-20 00-562-3113 . . . . . . . 2-157 00-579-2048 . . . . . . . 2-174
00-549-8050 . . . . . . . 2-130 00-551-8155 . . . . . . . 2-18 00-562-3440 . . . . . . . 2-104 00-579-2071 . . . . . . . 2-67
00-549-9589 . . . . . . . 2-108 00-551-8688 . . . . . . . 2-177 00-566-4461 . . . . . . . 2-66 00-579-2072 . . . . . . . 2-67
00-550-0045 . . . . . . . 2-95 00-551-8689 . . . . . . . 2-177 00-567-4905 . . . . . . . 2-126 00-579-2073 . . . . . . . 2-67
00-550-0711 . . . . . . . 2-96 00-551-8705 . . . . . . . 2-177 00-568-4640 . . . . . . . 2-184 00-579-2074 . . . . . . . 2-67
00-550-0816 . . . . . . . 2-58 00-551-9659 . . . . . . . 2-178 00-568-4687 . . . . . . . 2-184 00-579-2136 . . . . . . . 2-24
00-550-1130 . . . . . . . 2-69 00-551-9671 . . . . . . . 2-178 00-568-9620 . . . . . . . 2-162 00-579-2139 . . . . . . . 2-24
00-550-1558 . . . . . . . 2-52 00-551-9672 . . . . . . . 2-178 00-571-2363 . . . . . . . 2-85 00-579-2896 . . . . . . . 2-158
00-550-1879 . . . . . . . 2-52 00-551-9717 . . . . . . . 2-178 00-571-9008 . . . . . . . 2-126 00-579-4576 . . . . . . . 2-24
00-550-2335 . . . . . . . 2-90 00-551-9728 . . . . . . . 2-178 00-571-9519 . . . . . . . 2-77 00-579-5054 . . . . . . . 2-110
00-550-3714 . . . . . . . 2-69 00-551-9731 . . . . . . . 2-178 00-571-9709 . . . . . . . 2-68 00-579-5238 . . . . . . . 2-12
00-550-3715 . . . . . . . 2-69 00-551-9786 . . . . . . . 2-114 00-571-9710 . . . . . . . 2-66 00-579-6390 . . . . . . . 2-156
00-550-3923 . . . . . . . 2-11 00-551-9860 . . . . . . . 2-178 00-572-0817 . . . . . . . 2-160 00-579-6481 . . . . . . . 2-168
00-550-3924 . . . . . . . 2-11 00-551-9868 . . . . . . . 2-178 00-573-7616 . . . . . . . 2-64 00-579-7645 . . . . . . . 2-95
00-550-3925 . . . . . . . 2-12 00-551-9870 . . . . . . . 2-178 00-574-1024 . . . . . . . 2-50 00-579-7825 . . . . . . . 2-93
00-550-3931 . . . . . . . 2-11 00-551-9871 . . . . . . . 2-178 00-575-5423 . . . . . . . 2-163 00-579-8108 . . . . . . . 2-118
00-550-3934 . . . . . . . 2-11 00-551-9872 . . . . . . . 2-178 00-575-5740 . . . . . . . 2-77 00-579-8152 . . . . . . . 2-94
00-550-3935 . . . . . . . 2-11 00-551-9879 . . . . . . . 2-178 00-575-6105 . . . . . . . 2-99 00-579-9678 . . . . . . . 2-137
00-550-3936 . . . . . . . 2-11 00-552-8000 . . . . . . . 2-152 00-576-1032 . . . . . . . 2-44 00-579-9881 . . . . . . . 2-80
00-550-4725 . . . . . . . 2-55 00-554-0990 . . . . . . . 2-121 00-576-1220 . . . . . . . 2-66 00-580-2259 . . . . . . . 2-174
00-550-5009 . . . . . . . 2-65 00-554-6893 . . . . . . . 2-46 00-576-1223 . . . . . . . 2-18 00-580-2293 . . . . . . . 2-112
2-206
Page Page Page Page

00-580-4454 . . . . . . . 2-174 00-582-5807 . . . . . . . 2-24 00-584-9400 . . . . . . . 2-138 00-597-3304 . . . . . . . 2-141
00-580-5055 . . . . . . . 2-126 00-582-5808 . . . . . . . 2-24 00-585-0615 . . . . . . . 2-101 00-597-4314 . . . . . . . 2-170
00-580-5327 . . . . . . . 2-125 00-582-5965 . . . . . . . 2-69 00-585-0616 . . . . . . . 2-101 00-597-4351 . . . . . . . 2-168
00-580-5329 . . . . . . . 2-125 00-582-6055 . . . . . . . 2-55 00-585-1309 . . . . . . . 2-115 00-597-5015 . . . . . . . 2-173
00-580-6326 . . . . . . . 2-120 00-582-6058 . . . . . . . 2-55 00-585-1310 . . . . . . . 2-115 00-597-5141 . . . . . . . 2-173
00-580-7224 . . . . . . . 2-17 00-582-6151 . . . . . . . 2-29 00-585-5184 . . . . . . . 2-175 00-597-5142 . . . . . . . 2-173
00-582-1533 . . . . . . . 2-127 00-582-6393 . . . . . . . 2-48 00-585-6937 . . . . . . . 2-126 00-597-5153 . . . . . . . 2-173
00-582-1534 . . . . . . . 2-127 00-582-6411 . . . . . . . 2-42 00-585-7594 . . . . . . . 2-67 00-597-5798 . . . . . . . 2-151
00-582-1536 . . . . . . . 2-126 00-582-6494 . . . . . . . 2-56 00-585-8176 . . . . . . . 2-173 00-597-7383 . . . . . . . 2-173
00-582-1537 . . . . . . . 2-126 00-582-6692 . . . . . . . 2-42 00-587-2705 . . . . . . . 2-79 00-597-7407 . . . . . . . 2-174
00-582-1538 . . . . . . . 2-126 00-582-6738 . . . . . . . 2-51 00-588-0391 . . . . . . . 2-67 00-597-7408 . . . . . . . 2-173
00-582-1539 . . . . . . . 2-126 00-582-7144 . . . . . . . 2-119 00-588-2753 . . . . . . . 2-66 00-597-7409 . . . . . . . 2-173
00-582-1540 . . . . . . . 2-126 00-582-7481 . . . . . . . 2-125 00-590-1739 . . . . . . . 2-168 00-597-7422 . . . . . . . 2-173
00-582-1541 . . . . . . . 2-126 00-582-7526 . . . . . . . 2-126 00-591-4898 . . . . . . . 2-104 00-597-7423 . . . . . . . 2-173
00-582-1542 . . . . . . . 2-126 00-582-8381 . . . . . . . 2-47 00-591-4900 . . . . . . . 2-104 00-597-7424 . . . . . . . 2-173
00-582-1543 . . . . . . . 2-126 00-582-9223 . . . . . . . 2-18 00-591-7681 . . . . . . . 2-67 00-597-8475 . . . . . . . 2-168
00-582-1544 . . . . . . . 2-126 00-584-0024 . . . . . . . 2-96 00-593-3234 . . . . . . . 2-110 00-597-8487 . . . . . . . 2-169
00-582-1545 . . . . . . . 2-127 00-584-0257 . . . . . . . 2-79 00-595-5800 . . . . . . . 2-66 00-597-8513 . . . . . . . 2-169
00-582-1546 . . . . . . . 2-127 00-584-0672 . . . . . . . 2-86 00-595-5992 . . . . . . . 2-66 00-597-9219 . . . . . . . 2-173
00-582-1547 . . . . . . . 2-126 00-584-1094 . . . . . . . 2-95 00-595-6057 . . . . . . . 2-66 00-597-9221 . . . . . . . 2-174
00-582-1548 . . . . . . . 2-126 00-584-1419 . . . . . . . 2-103 00-595-6093 . . . . . . . 2-174 00-597-9385 . . . . . . . 2-136
00-582-1549 . . . . . . . 2-126 00-584-1421 . . . . . . . 2-66 00-595-6096 . . . . . . . 2-65 00-597-9433 . . . . . . . 2-144
00-582-1550 . . . . . . . 2-126 00-584-1423 . . . . . . . 2-67 00-595-6196 . . . . . . . 2-73 00-597-9598 . . . . . . . 2-149
00-582-1551 . . . . . . . 2-126 00-584-2060 . . . . . . . 2-130 00-595-6211 . . . . . . . 2-66 00-598-0146 . . . . . . . 2-137
00-582-1591 . . . . . . . 2-67 00-584-2358 . . . . . . . 2-163 00-595-6425 . . . . . . . 2-65 00-598-0529 . . . . . . . 2-137
00-582-2011 . . . . . . . 2-133 00-584-2359 . . . . . . . 2-161 00-595-6607 . . . . . . . 2-65 00-598-1112 . . . . . . . 2-168
00-582-2012 . . . . . . . 2-133 00-584-3782 . . . . . . . 2-65 00-595-6612 . . . . . . . 2-66 00-598-1138 . . . . . . . 2-171
00-582-2107 . . . . . . . 2-127 00-584-4247 . . . . . . . 2-157 00-595-6761 . . . . . . . 2-66 00-598-1474 . . . . . . . 2-168
00-582-2108 . . . . . . . 2-127 00-584-4486 . . . . . . . 2-150 00-595-6844 . . . . . . . 2-66 00-598-1500 . . . . . . . 2-170
00-582-2111 . . . . . . . 2-126 00-584-4520 . . . . . . . 2-150 00-595-6852 . . . . . . . 2-65 00-598-1774 . . . . . . . 2-169
00-582-2113 . . . . . . . 2-126 00-584-4580 . . . . . . . 2-150 00-595-7078 . . . . . . . 2-70 00-598-1785 . . . . . . . 2-170
00-582-2115 . . . . . . . 2-127 00-584-4653 . . . . . . . 2-151 00-595-7079 . . . . . . . 2-70 00-598-1840 . . . . . . . 2-171
00-582-2116 . . . . . . . 2-126 00-584-4654 . . . . . . . 2-151 00-595-7237 . . . . . . . 2-69 00-598-2933 . . . . . . . 2-79
00-582-2118 . . . . . . . 2-126 00-584-4660 . . . . . . . 2-151 00-595-7421 . . . . . . . 2-61 00-598-4201 . . . . . . . 2-137
00-582-2119 . . . . . . . 2-127 00-584-4952 . . . . . . . 2-46 00-595-7555 . . . . . . . 2-71 00-598-5282 . . . . . . . 2-165
00-582-2141 . . . . . . . 2-126 00-584-5272 . . . . . . . 2-69 00-595-7652 . . . . . . . 2-59 00-598-5287 . . . . . . . 2-165
00-582-2142 . . . . . . . 2-126 00-584-5884 . . . . . . . 2-154 00-595-8121 . . . . . . . 2-71 00-598-5322 . . . . . . . 2-165
00-582-2143 . . . . . . . 2-126 00-584-6532 . . . . . . . 2-78 00-596-1712 . . . . . . . 2-70 00-598-5323 . . . . . . . 2-165
00-582-2144 . . . . . . . 2-127 00-584-6556 . . . . . . . 2-137 00-596-1766 . . . . . . . 2-70 00-598-5365 . . . . . . . 2-165
00-582-2145 . . . . . . . 2-127 00-584-6563 . . . . . . . 2-136 00-596-1774 . . . . . . . 2-70 00-598-5389 . . . . . . . 2-165
00-582-2146 . . . . . . . 2-126 00-584-6620 . . . . . . . 2-171 00-596-4274 . . . . . . . 2-64 00-598-5394 . . . . . . . 2-165
00-582-2148 . . . . . . . 2-127 00-584-6638 . . . . . . . 2-93 00-596-7618 . . . . . . . 2-92 00-598-5416 . . . . . . . 2-165
00-582-2149 . . . . . . . 2-127 00-584-7796 . . . . . . . 2-66 00-596-7647 . . . . . . . 2-173 00-598-5634 . . . . . . . 2-141
00-582-2150 . . . . . . . 2-126 00-584-7799 . . . . . . . 2-66 00-596-7691 . . . . . . . 2-69 00-598-5916 . . . . . . . 2-75
00-582-2466 . . . . . . . 2-79 00-584-7888 . . . . . . . 2-69 00-596-7738 . . . . . . . 2-130 00-598-6368 . . . . . . . 2-135
00-582-2522 . . . . . . . 2-118 00-584-7889 . . . . . . . 2-69 00-596-7783 . . . . . . . 2-174 00-598-6371 . . . . . . . 2-140
00-582-3115 . . . . . . . 2-171 00-584-7947 . . . . . . . 2-12 00-596-8422 . . . . . . . 2-57 00-598-6435 . . . . . . . 2-79
00-582-3305 . . . . . . . 2-84 00-584-7983 . . . . . . . 2-66 00-597-0055 . . . . . . . 2-136 00-598-6605 . . . . . . . 2-165
00-582-3496 . . . . . . . 2-84 00-584-7985 . . . . . . . 2-66 00-597-0624 . . . . . . . 2-81 00-598-6610 . . . . . . . 2-168
00-582-3601 . . . . . . . 2-91 00-584-7986 . . . . . . . 2-66 00-597-1197 . . . . . . . 2-159 00-598-6966 . . . . . . . 2-129
00-582-3804 . . . . . . . 2-154 00-584-8002 . . . . . . . 2-56 00-597-1914 . . . . . . . 2-160 00-598-7147 . . . . . . . 2-163
00-582-3934 . . . . . . . 2-146 00-584-8003 . . . . . . . 2-56 00-597-2515 . . . . . . . 2-79 00-598-7148 . . . . . . . 2-163
00-582-5677 . . . . . . . 2-66 00-584-8012 . . . . . . . 2-30 00-597-3302 . . . . . . . 2-141 00-598-7149 . . . . . . . 2-164
2-207
Page Page Page Page

00-598-7150 . . . . . . . 2-164 00-612-3890 . . . . . . . 2-70 00-616-8660 . . . . . . . 2-56 00-626-3495 . . . . . . . 2-22
00-598-7151 . . . . . . . 2-164 00-613-8066 . . . . . . . 2-76 00-616-8748 . . . . . . . 2-48 00-627-4889 . . . . . . . 2-79
00-598-8251 . . . . . . . 2-134 00-613-9038 . . . . . . . 2-40 00-616-9604 . . . . . . . 2-154 00-627-5666 . . . . . . . 2-161
00-598-9429 . . . . . . . 2-80 00-613-9396 . . . . . . . 2-39 00-618-0475 . . . . . . . 2-67 00-629-9907 . . . . . . . 2-145
00-599-0458 . . . . . . . 2-118 00-614-0245 . . . . . . . 2-24 00-618-1407 . . . . . . . 2-22 00-631-3429 . . . . . . . 2-83
00-599-1568 . . . . . . . 2-67 00-614-0246 . . . . . . . 2-24 00-618-1435 . . . . . . . 2-66 00-631-3430 . . . . . . . 2-83
00-599-1680 . . . . . . . 2-67 00-614-0247 . . . . . . . 2-24 00-618-3223 . . . . . . . 2-117 00-631-7891 . . . . . . . 2-141
00-599-3259 . . . . . . . 2-67 00-614-0260 . . . . . . . 2-24 00-618-6282 . . . . . . . 2-127 00-631-7894 . . . . . . . 2-141
00-599-4140 . . . . . . . 2-103 00-614-0261 . . . . . . . 2-24 00-618-6681 . . . . . . . 2-110 00-632-2777 . . . . . . . 2-12
00-599-4291 . . . . . . . 2-106 00-614-0270 . . . . . . . 2-24 00-618-6845 . . . . . . . 2-126 00-633-8295 . . . . . . . 2-143
00-599-4679 . . . . . . . 2-172 00-614-3423 . . . . . . . 2-24 00-618-8579 . . . . . . . 2-165 00-634-7045 . . . . . . . 2-168
00-599-4732 . . . . . . . 2-66 00-614-3500 . . . . . . . 2-62 00-618-8899 . . . . . . . 2-126 00-634-7444 . . . . . . . 2-171
00-599-4754 . . . . . . . 2-172 00-614-3505 . . . . . . . 2-66 00-618-9476 . . . . . . . 2-105 00-634-7465 . . . . . . . 2-170
00-599-4847 . . . . . . . 2-103 00-614-3506 . . . . . . . 2-66 00-618-9479 . . . . . . . 2-105 00-634-7860 . . . . . . . 2-141
00-599-4853 . . . . . . . 2-174 00-614-3586 . . . . . . . 2-79 00-619-0150 . . . . . . . 2-162 00-634-8265 . . . . . . . 2-125
00-599-4881 . . . . . . . 2-172 00-615-6762 . . . . . . . 2-134 00-619-0285 . . . . . . . 2-163 00-634-8891 . . . . . . . 2-184
00-599-5062 . . . . . . . 2-130 00-616-1224 . . . . . . . 2-42 00-619-0899 . . . . . . . 2-79 00-637-0374 . . . . . . . 2-48
00-599-5353 . . . . . . . 2-103 00-616-1532 . . . . . . . 2-22 00-619-1148 . . . . . . . 2-66 00-637-0880 . . . . . . . 2-135
00-599-5616 . . . . . . . 2-65 00-616-1534 . . . . . . . 2-41 00-619-2020 . . . . . . . 2-29 00-637-1103 . . . . . . . 2-27
00-599-5782 . . . . . . . 2-114 00-616-1586 . . . . . . . 2-62 00-619-2322 . . . . . . . 2-24 00-637-1119 . . . . . . . 2-27
00-599-5912 . . . . . . . 2-172 00-616-2201 . . . . . . . 2-48 00-619-2985 . . . . . . . 2-76 00-637-1123 . . . . . . . 2-27
00-599-5946 . . . . . . . 2-174 00-616-2424 . . . . . . . 2-22 00-619-3277 . . . . . . . 2-79 00-637-1124 . . . . . . . 2-27
00-599-6406 . . . . . . . 2-118 00-616-2470 . . . . . . . 2-12 00-619-3392 . . . . . . . 2-80 00-637-1125 . . . . . . . 2-27
00-599-6919 . . . . . . . 2-67 00-616-2471 . . . . . . . 2-12 00-619-3664 . . . . . . . 2-162 00-637-3471 . . . . . . . 2-66
00-599-8182 . . . . . . . 2-104 00-616-2618 . . . . . . . 2-42 00-619-3835 . . . . . . . 2-156 00-637-3625 . . . . . . . 2-57
00-599-8249 . . . . . . . 2-101 00-616-2759 . . . . . . . 2-47 00-619-3999 . . . . . . . 2-78 00-637-3627 . . . . . . . 2-57
00-599-9201 . . . . . . . 2-181 00-616-2793 . . . . . . . 2-57 00-619-4039 . . . . . . . 2-86 00-637-3628 . . . . . . . 2-57
00-599-9550 . . . . . . . 2-117 00-616-2980 . . . . . . . 2-43 00-619-4045 . . . . . . . 2-3 00-637-3629 . . . . . . . 2-57
00-599-9552 . . . . . . . 2-117 00-616-3555 . . . . . . . 2-69 00-619-4344 . . . . . . . 2-22 00-637-3630 . . . . . . . 2-57
00-599-9728 . . . . . . . 2-67 00-616-3801 . . . . . . . 2-22 00-619-4668 . . . . . . . 2-156 00-637-3631 . . . . . . . 2-57
00-601-7292 . . . . . . . 2-98 00-616-3839 . . . . . . . 2-79 00-619-6031 . . . . . . . 2-22 00-637-3632 . . . . . . . 2-57
00-603-2259 . . . . . . . 2-103 00-616-3851 . . . . . . . 2-98 00-619-7031 . . . . . . . 2-137 00-637-3634 . . . . . . . 2-57
00-603-6798 . . . . . . . 2-103 00-616-4261 . . . . . . . 2-78 00-619-7044 . . . . . . . 2-98 00-637-4521 . . . . . . . 2-32
00-605-2146 . . . . . . . 2-60 00-616-4831 . . . . . . . 2-24 00-619-7229 . . . . . . . 2-170 00-637-4522 . . . . . . . 2-32
00-605-2172 . . . . . . . 2-34 00-616-5432 . . . . . . . 2-162 00-619-7754 . . . . . . . 2-136 00-637-5580 . . . . . . . 2-26
00-606-2256 . . . . . . . 2-174 00-616-5514 . . . . . . . 2-74 00-619-7976 . . . . . . . 2-75 00-637-5654 . . . . . . . 2-25
00-607-0617 . . . . . . . 2-128 00-616-5515 . . . . . . . 2-74 00-619-8973 . . . . . . . 2-151 00-637-6461 . . . . . . . 2-51
00-607-1326 . . . . . . . 2-35 00-616-5516 . . . . . . . 2-74 00-619-9166 . . . . . . . 2-152 00-637-6462 . . . . . . . 2-51
00-607-1328 . . . . . . . 2-62 00-616-5517 . . . . . . . 2-74 00-619-9167 . . . . . . . 2-152 00-637-6463 . . . . . . . 2-51
00-607-3873 . . . . . . . 2-101 00-616-5519 . . . . . . . 2-74 00-619-9168 . . . . . . . 2-152 00-637-6464 . . . . . . . 2-51
00-607-6225 . . . . . . . 2-138 00-616-5522 . . . . . . . 2-74 00-620-7359 . . . . . . . 2-111 00-637-6465 . . . . . . . 2-51
00-607-8537 . . . . . . . 2-166 00-616-5523 . . . . . . . 2-74 00-621-3192 . . . . . . . 2-172 00-637-6466 . . . . . . . 2-51
00-608-0486 . . . . . . . 2-175 00-616-5524 . . . . . . . 2-74 00-621-5236 . . . . . . . 2-68 00-637-6467 . . . . . . . 2-51
00-608-5060 . . . . . . . 2-159 00-616-5525 . . . . . . . 2-74 00-621-5445 . . . . . . . 2-71 00-637-6468 . . . . . . . 2-51
00-608-5061 . . . . . . . 2-160 00-616-5526 . . . . . . . 2-74 00-621-5449 . . . . . . . 2-73 00-637-6469 . . . . . . . 2-51
00-608-5178 . . . . . . . 2-75 00-616-5530 . . . . . . . 2-74 00-622-1724 . . . . . . . 2-62 00-637-6470 . . . . . . . 2-51
00-608-6432 . . . . . . . 2-115 00-616-5531 . . . . . . . 2-74 00-622-9475 . . . . . . . 2-24 00-637-6471 . . . . . . . 2-51
00-609-6771 . . . . . . . 2-166 00-616-6086 . . . . . . . 2-22 00-622-9479 . . . . . . . 2-24 00-637-6472 . . . . . . . 2-51
00-610-5283 . . . . . . . 2-67 00-616-6370 . . . . . . . 2-12 00-622-9651 . . . . . . . 2-139 00-637-6473 . . . . . . . 2-51
00-610-5323 . . . . . . . 2-67 00-616-6750 . . . . . . . 2-66 00-625-5756 . . . . . . . 2-66 00-637-6474 . . . . . . . 2-51
00-610-5324 . . . . . . . 2-67 00-616-6964 . . . . . . . 2-17 00-625-7672 . . . . . . . 2-22 00-637-6475 . . . . . . . 2-51
00-610-5325 . . . . . . . 2-104 00-616-7669 . . . . . . . 2-156 00-625-8019 . . . . . . . 2-68 00-637-6476 . . . . . . . 2-51
00-611-0906 . . . . . . . 2-167 00-616-8217 . . . . . . . 2-22 00-625-8020 . . . . . . . 2-104 00-637-6478 . . . . . . . 2-51
2-208
Page Page Page Page

00-637-6479 . . . . . . . 2-51 00-638-7409 . . . . . . . 2-27 00-641-4439 . . . . . . . 2-104 00-663-2215 . . . . . . . 2-93
00-637-6480 . . . . . . . 2-51 00-638-8088 . . . . . . . 2-92 00-641-5843 . . . . . . . 2-179 00-663-2428 . . . . . . . 2-134
00-637-6481 . . . . . . . 2-51 00-638-8753 . . . . . . . 2-35 00-641-6366 . . . . . . . 2-128 00-663-2771 . . . . . . . 2-78
00-637-6482 . . . . . . . 2-51 00-638-9837 . . . . . . . 2-12 00-641-6910 . . . . . . . 2-107 00-663-4687 . . . . . . . 2-178
00-637-6483 . . . . . . . 2-51 00-638-9857 . . . . . . . 2-65 00-641-7148 . . . . . . . 2-66 00-663-4689 . . . . . . . 2-178
00-637-6485 . . . . . . . 2-51 00-639-0047 . . . . . . . 2-21 00-641-7556 . . . . . . . 2-67 00-663-4693 . . . . . . . 2-178
00-637-6486 . . . . . . . 2-51 00-639-0561 . . . . . . . 2-96 00-641-8366 . . . . . . . 2-103 00-663-4695 . . . . . . . 2-178
00-637-6491 . . . . . . . 2-51 00-639-1465 . . . . . . . 2-49 00-641-9725 . . . . . . . 2-174 00-663-7035 . . . . . . . 2-127
00-637-6492 . . . . . . . 2-51 00-639-1468 . . . . . . . 2-48 00-644-0392 . . . . . . . 2-165 00-663-7151 . . . . . . . 2-127
00-637-6493 . . . . . . . 2-51 00-639-1791 . . . . . . . 2-40 00-644-1485 . . . . . . . 2-157 00-663-7152 . . . . . . . 2-127
00-637-6494 . . . . . . . 2-51 00-639-2258 . . . . . . . 2-48 00-653-0293 . . . . . . . 2-110 00-664-0401 . . . . . . . 2-79
00-637-6495 . . . . . . . 2-51 00-639-2315 . . . . . . . 2-48 00-654-2948 . . . . . . . 2-133 00-664-0459 . . . . . . . 2-82
00-637-6496 . . . . . . . 2-51 00-639-5055 . . . . . . . 2-95 00-655-7219 . . . . . . . 2-66 00-664-0462 . . . . . . . 2-82
00-637-6498 . . . . . . . 2-51 00-639-5575 . . . . . . . 2-96 00-655-7541 . . . . . . . 2-22 00-664-0463 . . . . . . . 2-82
00-637-6499 . . . . . . . 2-51 00-639-6399 . . . . . . . 2-27 00-655-8113 . . . . . . . 2-170 00-664-0671 . . . . . . . 2-135
00-637-6501 . . . . . . . 2-51 00-639-7246 . . . . . . . 2-18 00-655-8141 . . . . . . . 2-165 00-664-1326 . . . . . . . 2-140
00-637-6502 . . . . . . . 2-51 00-639-7249 . . . . . . . 2-18 00-655-8157 . . . . . . . 2-135 00-664-1328 . . . . . . . 2-140
00-637-6503 . . . . . . . 2-51 00-639-7253 . . . . . . . 2-18 00-655-9246 . . . . . . . 2-35 00-664-1525 . . . . . . . 2-74
00-637-6504 . . . . . . . 2-51 00-639-7254 . . . . . . . 2-18 00-655-9440 . . . . . . . 2-11 00-664-1667 . . . . . . . 2-139
00-637-6505 . . . . . . . 2-51 00-639-7256 . . . . . . . 2-17 00-655-9441 . . . . . . . 2-11 00-664-1705 . . . . . . . 2-139
00-637-6507 . . . . . . . 2-51 00-639-7554 . . . . . . . 2-67 00-655-9442 . . . . . . . 2-11 00-664-1707 . . . . . . . 2-139
00-637-6510 . . . . . . . 2-51 00-639-7715 . . . . . . . 2-34 00-655-9443 . . . . . . . 2-11 00-664-2139 . . . . . . . 2-164
00-637-6512 . . . . . . . 2-51 00-639-7954 . . . . . . . 2-96 00-655-9444 . . . . . . . 2-12 00-664-2145 . . . . . . . 2-164
00-637-6513 . . . . . . . 2-51 00-639-8053 . . . . . . . 2-11 00-655-9445 . . . . . . . 2-12 00-664-2149 . . . . . . . 2-164
00-637-6520 . . . . . . . 2-51 00-640-6176 . . . . . . . 2-2 00-655-9446 . . . . . . . 2-12 00-664-2992 . . . . . . . 2-161
00-637-6521 . . . . . . . 2-51 00-640-6177 . . . . . . . 2-2 00-655-9447 . . . . . . . 2-12 00-664-3249 . . . . . . . 2-145
00-637-6522 . . . . . . . 2-51 00-640-6178 . . . . . . . 2-2 00-655-9448 . . . . . . . 2-12 00-664-3250 . . . . . . . 2-145
00-637-6949 . . . . . . . 2-21 00-640-9717 . . . . . . . 2-127 00-655-9449 . . . . . . . 2-12 00-664-3287 . . . . . . . 2-161
00-637-7696 . . . . . . . 2-43 00-640-9743 . . . . . . . 2-104 00-655-9451 . . . . . . . 2-12 00-664-3619 . . . . . . . 2-163
00-637-8591 . . . . . . . 2-42 00-640-9966 . . . . . . . 2-102 00-655-9452 . . . . . . . 2-12 00-664-3629 . . . . . . . 2-164
00-637-9433 . . . . . . . 2-12 00-641-0017 . . . . . . . 2-173 00-655-9453 . . . . . . . 2-12 00-664-4216 . . . . . . . 2-161
00-637-9541 . . . . . . . 2-69 00-641-0101 . . . . . . . 2-128 00-655-9467 . . . . . . . 2-16 00-664-4473 . . . . . . . 2-142
00-637-9674 . . . . . . . 2-45 00-641-0103 . . . . . . . 2-127 00-655-9477 . . . . . . . 2-65 00-664-4699 . . . . . . . 2-75
00-637-9675 . . . . . . . 2-44 00-641-0225 . . . . . . . 2-128 00-655-9544 . . . . . . . 2-56 00-664-6213 . . . . . . . 2-79
00-638-0074 . . . . . . . 2-52 00-641-0426 . . . . . . . 2-181 00-656-0114 . . . . . . . 2-66 00-664-6395 . . . . . . . 2-134
00-638-0084 . . . . . . . 2-51 00-641-0427 . . . . . . . 2-181 00-656-0358 . . . . . . . 2-41 00-664-6974 . . . . . . . 2-140
00-638-0502 . . . . . . . 2-27 00-641-0428 . . . . . . . 2-181 00-656-0397 . . . . . . . 2-173 00-664-7014 . . . . . . . 2-142
00-638-1124 . . . . . . . 2-58 00-641-0429 . . . . . . . 2-181 . . . . . . . 2-174 00-664-7294 . . . . . . . 2-79
00-638-1171 . . . . . . . 2-40 00-641-0468 . . . . . . . 2-67 00-656-0398 . . . . . . . 2-70 00-664-8121 . . . . . . . 2-140
00-638-1485 . . . . . . . 2-45 00-641-1571 . . . . . . . 2-127 00-656-7020 . . . . . . . 2-174 00-664-8141 . . . . . . . 2-140
00-638-1782 . . . . . . . 2-34 00-641-1573 . . . . . . . 2-128 00-659-8291 . . . . . . . 2-27 00-664-8163 . . . . . . . 2-137
00-638-1878 . . . . . . . 2-35 00-641-1698 . . . . . . . 2-114 00-660-2215 . . . . . . . 2-65 00-664-8164 . . . . . . . 2-137
00-638-2217 . . . . . . . 2-40 00-641-1988 . . . . . . . 2-173 00-660-2467 . . . . . . . 2-24 00-664-8188 . . . . . . . 2-137
00-638-2281 . . . . . . . 2-27 00-641-1990 . . . . . . . 2-111 00-660-2625 . . . . . . . 2-24 00-664-9056 . . . . . . . 2-137
00-638-2303 . . . . . . . 2-27 00-641-1993 . . . . . . . 2-106 00-660-2840 . . . . . . . 2-33 00-667-5522 . . . . . . . 2-157
00-638-2605 . . . . . . . 2-58 00-641-2346 . . . . . . . 2-115 00-660-3149 . . . . . . . 2-17 00-667-9155 . . . . . . . 2-153
00-638-2756 . . . . . . . 2-151 00-641-2887 . . . . . . . 2-110 00-660-3381 . . . . . . . 2-61 00-667-9183 . . . . . . . 2-154
00-638-3826 . . . . . . . 2-27 00-641-2987 . . . . . . . 2-97 00-660-5248 . . . . . . . 2-135 00-667-9365 . . . . . . . 2-158
00-638-4017 . . . . . . . 2-26 00-641-3051 . . . . . . . 2-128 00-662-9721 . . . . . . . 2-173 00-667-9366 . . . . . . . 2-158
00-638-4301 . . . . . . . 2-90 00-641-3718 . . . . . . . 2-128 00-662-9722 . . . . . . . 2-173 00-667-9826 . . . . . . . 2-156
00-638-5730 . . . . . . . 2-59 00-641-3719 . . . . . . . 2-128 00-662-9735 . . . . . . . 2-137 00-671-2275 . . . . . . . 2-5
00-638-5766 . . . . . . . 2-42 00-641-4053 . . . . . . . 2-110 00-662-9817 . . . . . . . 2-145 00-672-5835 . . . . . . . 2-95
00-638-6053 . . . . . . . 2-26 00-641-4167 . . . . . . . 2-103 00-663-2125 . . . . . . . 2-165 00-672-5944 . . . . . . . 2-58
2-209
Page Page Page Page

00-675-8900 . . . . . . . 2-92 00-685-0678 . . . . . . . 2-78 00-701-1768 . . . . . . . 2-119 00-705-2468 . . . . . . . 2-21
00-676-5008 . . . . . . . 2-153 00-685-0707 . . . . . . . 2-135 00-701-1819 . . . . . . . 2-119 00-705-2472 . . . . . . . 2-21
00-676-8265 . . . . . . . 2-56 00-685-1202 . . . . . . . 2-142 00-701-1880 . . . . . . . 2-119 00-705-2801 . . . . . . . 2-21
00-678-1893 . . . . . . . 2-150 00-685-1450 . . . . . . . 2-67 00-701-5073 . . . . . . . 2-25 00-705-2804 . . . . . . . 2-21
00-678-3309 . . . . . . . 2-141 00-685-1744 . . . . . . . 2-60 00-701-5074 . . . . . . . 2-25 00-705-2833 . . . . . . . 2-21
00-678-3310 . . . . . . . 2-141 00-685-1876 . . . . . . . 2-46 00-701-5075 . . . . . . . 2-25 00-709-8517 . . . . . . . 2-14
00-679-8493 . . . . . . . 2-174 00-685-2634 . . . . . . . 2-42 00-701-5078 . . . . . . . 2-25 00-709-8523 . . . . . . . 2-14
00-680-1357 . . . . . . . 2-155 00-685-2767 . . . . . . . 2-58 00-701-5079 . . . . . . . 2-25 00-710-0133 . . . . . . . 2-77
00-680-2375 . . . . . . . 2-168 00-685-3013 . . . . . . . 2-16 00-701-5118 . . . . . . . 2-25 00-710-4359 . . . . . . . 2-3
00-680-2940 . . . . . . . 2-134 00-685-3027 . . . . . . . 2-41 00-701-5228 . . . . . . . 2-25 00-712-6251 . . . . . . . 2-171
00-680-3381 . . . . . . . 2-161 00-685-3097 . . . . . . . 2-36 00-701-5786 . . . . . . . 2-61 00-715-0566 . . . . . . . 2-42
00-680-3957 . . . . . . . 2-82 00-685-3344 . . . . . . . 2-35 00-701-9695 . . . . . . . 2-96 00-715-1152 . . . . . . . 2-170
00-680-4375 . . . . . . . 2-135 00-685-3511 . . . . . . . 2-12 00-701-9807 . . . . . . . 2-83 00-715-1209 . . . . . . . 2-36
00-680-4626 . . . . . . . 2-79 00-685-3744 . . . . . . . 2-65 00-702-0495 . . . . . . . 2-58 00-715-1215 . . . . . . . 2-36
00-680-4892 . . . . . . . 2-62 00-685-3799 . . . . . . . 2-156 00-702-0609 . . . . . . . 2-21 00-715-1364 . . . . . . . 2-119
00-680-5430 . . . . . . . 2-22 00-685-4688 . . . . . . . 2-156 00-702-1260 . . . . . . . 2-76 00-716-2872 . . . . . . . 2-76
00-680-6309 . . . . . . . 2-47 00-685-5899 . . . . . . . 2-146 00-702-1371 . . . . . . . 2-133 00-716-8174 . . . . . . . 2-13
00-680-6393 . . . . . . . 2-22 00-685-6779 . . . . . . . 2-60 00-702-1372 . . . . . . . 2-133 00-716-8197 . . . . . . . 2-13
00-680-6395 . . . . . . . 2-17 00-686-1314 . . . . . . . 2-119 00-702-1595 . . . . . . . 2-22 00-716-8204 . . . . . . . 2-13
00-680-6745 . . . . . . . 2-66 00-687-1148 . . . . . . . 2-135 00-702-1596 . . . . . . . 2-22 00-717-5467 . . . . . . . 2-12
00-680-6779 . . . . . . . 2-42 00-687-2917 . . . . . . . 2-156 00-702-1664 . . . . . . . 2-133 00-717-5570 . . . . . . . 2-55
00-680-7296 . . . . . . . 2-66 00-687-3284 . . . . . . . 2-36 00-702-1665 . . . . . . . 2-133 00-717-5592 . . . . . . . 2-26
00-680-8768 . . . . . . . 2-141 00-687-3379 . . . . . . . 2-169 00-702-2534 . . . . . . . 2-126 00-717-6949 . . . . . . . 2-34
00-682-1460 . . . . . . . 2-75 00-687-3454 . . . . . . . 2-160 00-702-3102 . . . . . . . 2-76 00-717-6950 . . . . . . . 2-34
00-682-1502 . . . . . . . 2-139 00-687-3842 . . . . . . . 2-94 00-702-3126 . . . . . . . 2-76 00-717-6955 . . . . . . . 2-34
00-682-1505 . . . . . . . 2-144 00-687-5218 . . . . . . . 2-74 00-702-3139 . . . . . . . 2-76 00-719-3997 . . . . . . . 2-12
00-682-1508 . . . . . . . 2-143 00-687-5659 . . . . . . . 2-173 00-702-3192 . . . . . . . 2-76 00-719-5001 . . . . . . . 2-25
00-682-1645 . . . . . . . 2-143 00-687-5684 . . . . . . . 2-143 00-702-3336 . . . . . . . 2-94 00-719-5003 . . . . . . . 2-25
00-682-1686 . . . . . . . 2-145 00-687-5689 . . . . . . . 2-96 00-702-3375 . . . . . . . 2-98 00-719-5007 . . . . . . . 2-25
00-682-1762 . . . . . . . 2-171 00-687-6333 . . . . . . . 2-22 00-702-3376 . . . . . . . 2-98 00-719-5017 . . . . . . . 2-25
00-682-1777 . . . . . . . 2-79 00-687-7707 . . . . . . . 2-47 00-702-3998 . . . . . . . 2-42 00-719-5021 . . . . . . . 2-25
00-682-1857 . . . . . . . 2-144 00-687-7711 . . . . . . . 2-47 00-702-4484 . . . . . . . 2-49 00-719-5058 . . . . . . . 2-25
00-682-2116 . . . . . . . 2-134 00-687-8559 . . . . . . . 2-104 00-702-4523 . . . . . . . 2-12 00-719-5064 . . . . . . . 2-24
00-682-2118 . . . . . . . 2-134 00-688-0004 . . . . . . . 2-144 00-702-4524 . . . . . . . 2-12 00-719-5093 . . . . . . . 2-25
00-682-2174 . . . . . . . 2-133 00-688-0254 . . . . . . . 2-23 00-702-4893 . . . . . . . 2-76 00-719-5219 . . . . . . . 2-14
00-682-2473 . . . . . . . 2-135 00-688-2018 . . . . . . . 2-12 00-702-4898 . . . . . . . 2-76 00-719-5235 . . . . . . . 2-14
00-682-4425 . . . . . . . 2-67 00-688-2020 . . . . . . . 2-12 00-702-4915 . . . . . . . 2-76 00-719-5238 . . . . . . . 2-14
00-682-5930 . . . . . . . 2-70 00-688-2069 . . . . . . . 2-60 00-702-4975 . . . . . . . 2-86 00-719-5240 . . . . . . . 2-14
00-682-5971 . . . . . . . 2-35 00-688-2111 . . . . . . . 2-14 00-702-5006 . . . . . . . 2-95 00-719-5243 . . . . . . . 2-14
00-682-5972 . . . . . . . 2-35 00-689-3877 . . . . . . . 2-61 00-702-7217 . . . . . . . 2-124 00-719-5329 . . . . . . . 2-35
00-684-2093 . . . . . . . 2-174 00-689-6489 . . . . . . . 2-115 00-702-9070 . . . . . . . 2-12 00-719-5330 . . . . . . . 2-35
00-684-2164 . . . . . . . 2-126 00-689-8193 . . . . . . . 2-49 00-703-1451 . . . . . . . 2-89 00-719-5336 . . . . . . . 2-35
00-684-2168 . . . . . . . 2-127 00-689-8264 . . . . . . . 2-160 00-703-1693 . . . . . . . 2-172 00-719-5337 . . . . . . . 2-35
00-684-2572 . . . . . . . 2-126 00-689-8837 . . . . . . . 2-95 00-703-8309 . . . . . . . 2-58 00-719-5339 . . . . . . . 2-35
00-684-2735 . . . . . . . 2-126 00-689-8871 . . . . . . . 2-21 00-703-9346 . . . . . . . 2-95 00-719-5342 . . . . . . . 2-35
00-684-6698 . . . . . . . 2-174 00-690-5474 . . . . . . . 2-163 00-704-0704 . . . . . . . 2-92 00-719-5346 . . . . . . . 2-35
00-684-7471 . . . . . . . 2-166 00-691-0141 . . . . . . . 2-66 00-705-1640 . . . . . . . 2-21 00-719-5349 . . . . . . . 2-35
00-684-9501 . . . . . . . 2-141 00-691-0328 . . . . . . . 2-46 00-705-2030 . . . . . . . 2-21 00-719-5400 . . . . . . . 2-21
00-684-9910 . . . . . . . 2-86 00-691-0911 . . . . . . . 2-58 00-705-2189 . . . . . . . 2-21 00-719-5401 . . . . . . . 2-21
00-684-9944 . . . . . . . 2-3 00-695-2558 . . . . . . . 2-168 00-705-2271 . . . . . . . 2-21 00-719-5402 . . . . . . . 2-21
00-685-0030 . . . . . . . 2-165 00-695-3922 . . . . . . . 2-138 00-705-2332 . . . . . . . 2-21 00-719-5403 . . . . . . . 2-21
00-685-0196 . . . . . . . 2-41 00-699-9887 . . . . . . . 2-80 00-705-2387 . . . . . . . 2-21 00-719-5404 . . . . . . . 2-21
00-685-0553 . . . . . . . 2-76 00-699-9925 . . . . . . . 2-160 00-705-2388 . . . . . . . 2-21 00-719-5405 . . . . . . . 2-21
2-210
Page Page Page Page

00-719-5406 . . . . . . . 2-21 00-723-9394 . . . . . . . 2-35 00-726-2551 . . . . . . . 2-14 00-733-9090 . . . . . . . 2-64
00-719-5570 . . . . . . . 2-60 00-723-9396 . . . . . . . 2-35 00-726-2552 . . . . . . . 2-14 00-733-9096 . . . . . . . 2-108
00-720-3395 . . . . . . . 2-115 00-723-9398 . . . . . . . 2-35 00-726-2553 . . . . . . . 2-14 00-734-0765 . . . . . . . 2-34
00-720-3652 . . . . . . . 2-126 00-723-9412 . . . . . . . 2-31 00-726-2555 . . . . . . . 2-14 00-734-1843 . . . . . . . 2-126
00-720-5946 . . . . . . . 2-135 00-723-9415 . . . . . . . 2-30 00-726-2556 . . . . . . . 2-14 00-734-5525 . . . . . . . 2-141
00-720-7896 . . . . . . . 2-135 00-723-9676 . . . . . . . 2-67 00-726-2567 . . . . . . . 2-14 00-734-7121 . . . . . . . 2-32
00-720-7982 . . . . . . . 2-7 00-724-5541 . . . . . . . 2-118 00-726-3126 . . . . . . . 2-130 00-735-4548 . . . . . . . 2-58
00-720-8037 . . . . . . . 2-47 00-724-5811 . . . . . . . 2-35 00-726-6699 . . . . . . . 2-96 00-735-4567 . . . . . . . 2-77
00-720-8046 . . . . . . . 2-47 00-724-5813 . . . . . . . 2-35 00-726-6700 . . . . . . . 2-96 00-735-4568 . . . . . . . 2-78
00-720-8064 . . . . . . . 2-170 00-724-5815 . . . . . . . 2-35 00-726-6701 . . . . . . . 2-94 00-735-4571 . . . . . . . 2-77
00-720-8260 . . . . . . . 2-45 00-724-5834 . . . . . . . 2-35 00-726-7939 . . . . . . . 2-172 00-735-4572 . . . . . . . 2-78
00-720-8429 . . . . . . . 2-24 00-724-5882 . . . . . . . 2-35 00-726-8804 . . . . . . . 2-90 00-735-4573 . . . . . . . 2-78
00-720-8549 . . . . . . . 2-59 00-724-5884 . . . . . . . 2-35 00-727-0557 . . . . . . . 2-153 00-735-4575 . . . . . . . 2-78
00-720-8819 . . . . . . . 2-66 00-724-5886 . . . . . . . 2-35 00-727-0857 . . . . . . . 2-66 00-735-4578 . . . . . . . 2-78
00-720-9112 . . . . . . . 2-17 00-724-5887 . . . . . . . 2-35 00-727-0858 . . . . . . . 2-66 00-735-4966 . . . . . . . 2-85
00-721-3058 . . . . . . . 2-17 00-724-5893 . . . . . . . 2-35 00-727-1281 . . . . . . . 2-12 00-735-6235 . . . . . . . 2-130
00-721-3060 . . . . . . . 2-17 00-724-5898 . . . . . . . 2-35 00-727-4774 . . . . . . . 2-135 00-736-7720 . . . . . . . 2-174
00-721-4434 . . . . . . . 2-59 00-724-5903 . . . . . . . 2-35 . . . . . . . 2-135 00-737-0831 . . . . . . . 2-91
00-721-4828 . . . . . . . 2-169 00-724-5910 . . . . . . . 2-13 00-727-5223 . . . . . . . 2-61 00-737-5429 . . . . . . . 2-66
00-721-5093 . . . . . . . 2-59 00-724-5914 . . . . . . . 2-13 00-727-5731 . . . . . . . 2-79 00-737-7648 . . . . . . . 2-89
00-721-5244 . . . . . . . 2-87 00-724-5936 . . . . . . . 2-13 00-727-6804 . . . . . . . 2-12 00-739-9315 . . . . . . . 2-102
00-721-5492 . . . . . . . 2-14 00-724-6758 . . . . . . . 2-13 00-727-7010 . . . . . . . 2-105 00-747-9928 . . . . . . . 2-90
00-721-5503 . . . . . . . 2-98 00-724-6760 . . . . . . . 2-13 00-727-8832 . . . . . . . 2-24 00-751-7597 . . . . . . . 2-153
00-721-5665 . . . . . . . 2-12 00-724-6761 . . . . . . . 2-13 00-727-8833 . . . . . . . 2-24 00-752-8546 . . . . . . . 2-104
00-721-5980 . . . . . . . 2-62 00-724-6762 . . . . . . . 2-13 00-727-8834 . . . . . . . 2-24 00-752-8654 . . . . . . . 2-115
00-721-6476 . . . . . . . 2-170 00-724-6777 . . . . . . . 2-35 00-728-0949 . . . . . . . 2-134 00-752-9032 . . . . . . . 2-130
00-721-6876 . . . . . . . 2-93 00-724-6798 . . . . . . . 2-35 00-728-3491 . . . . . . . 2-144 00-752-9462 . . . . . . . 2-19
00-721-6877 . . . . . . . 2-170 00-724-6799 . . . . . . . 2-35 00-728-5489 . . . . . . . 2-34 00-753-1886 . . . . . . . 2-174
00-721-6936 . . . . . . . 2-141 00-724-6810 . . . . . . . 2-35 00-728-6315 . . . . . . . 2-35 00-753-2076 . . . . . . . 2-67
00-721-7498 . . . . . . . 2-141 00-724-7218 . . . . . . . 2-13 00-728-7702 . . . . . . . 2-67 00-753-2227 . . . . . . . 2-175
00-721-7610 . . . . . . . 2-42 00-724-7219 . . . . . . . 2-14 00-728-7715 . . . . . . . 2-63 00-753-2359 . . . . . . . 2-174
00-721-7642 . . . . . . . 2-78 00-724-7221 . . . . . . . 2-14 00-728-7716 . . . . . . . 2-63 00-753-3609 . . . . . . . 2-143
00-721-7653 . . . . . . . 2-141 00-724-7222 . . . . . . . 2-14 00-729-5103 . . . . . . . 2-128 00-753-3699 . . . . . . . 2-170
00-721-7680 . . . . . . . 2-171 00-724-7223 . . . . . . . 2-14 00-729-5141 . . . . . . . 2-126 00-753-3875 . . . . . . . 2-79
00-721-8115 . . . . . . . 2-152 00-724-7224 . . . . . . . 2-14 00-729-5142 . . . . . . . 2-126 00-753-3880 . . . . . . . 2-74
00-721-8116 . . . . . . . 2-152 00-724-7228 . . . . . . . 2-14 00-729-5143 . . . . . . . 2-127 00-753-3881 . . . . . . . 2-74
00-721-8117 . . . . . . . 2-152 00-724-7247 . . . . . . . 2-14 00-729-6537 . . . . . . . 2-101 00-753-3882 . . . . . . . 2-74
00-721-8352 . . . . . . . 2-141 00-724-7254 . . . . . . . 2-14 00-730-4572 . . . . . . . 2-73 00-753-3883 . . . . . . . 2-74
00-721-8879 . . . . . . . 2-153 00-724-7837 . . . . . . . 2-21 . . . . . . . 2-73 00-753-3885 . . . . . . . 2-74
00-722-0393 . . . . . . . 2-41 00-724-7902 . . . . . . . 2-118 00-730-7048 . . . . . . . 2-92 . . . . . . . 2-74
00-722-4630 . . . . . . . 2-33 00-725-0119 . . . . . . . 2-21 00-731-2737 . . . . . . . 2-157 00-753-3888 . . . . . . . 2-74
00-722-5998 . . . . . . . 2-66 00-725-0154 . . . . . . . 2-14 00-731-2930 . . . . . . . 2-76 00-753-3890 . . . . . . . 2-74
00-722-6520 . . . . . . . 2-26 00-725-0969 . . . . . . . 2-171 00-731-9092 . . . . . . . 2-174 00-753-3892 . . . . . . . 2-79
00-722-6533 . . . . . . . 2-80 00-725-2317 . . . . . . . 2-14 00-731-9165 . . . . . . . 2-174 00-753-3893 . . . . . . . 2-79
00-723-4458 . . . . . . . 2-56 00-725-3998 . . . . . . . 2-133 00-732-0511 . . . . . . . 2-14 00-753-3894 . . . . . . . 2-79
00-723-5394 . . . . . . . 2-47 00-725-3999 . . . . . . . 2-133 00-732-0512 . . . . . . . 2-14 00-753-3895 . . . . . . . 2-79
00-723-6780 . . . . . . . 2-141 00-725-4183 . . . . . . . 2-13 00-732-0558 . . . . . . . 2-56 00-753-3920 . . . . . . . 2-144
00-723-9378 . . . . . . . 2-35 00-725-4191 . . . . . . . 2-24 00-732-0559 . . . . . . . 2-56 00-753-4217 . . . . . . . 2-45
00-723-9383 . . . . . . . 2-35 00-725-4369 . . . . . . . 2-126 00-732-0560 . . . . . . . 2-56 00-753-4322 . . . . . . . 2-13
00-723-9384 . . . . . . . 2-35 00-725-6033 . . . . . . . 2-138 00-732-9978 . . . . . . . 2-150 00-753-5278 . . . . . . . 2-149
00-723-9385 . . . . . . . 2-35 00-725-7347 . . . . . . . 2-8 00-733-5992 . . . . . . . 2-71 00-753-7112 . . . . . . . 2-70
00-723-9386 . . . . . . . 2-35 00-726-1638 . . . . . . . 2-106 00-733-7174 . . . . . . . 2-99 00-754-0822 . . . . . . . 2-86
00-723-9387 . . . . . . . 2-35 00-726-2214 . . . . . . . 2-135 00-733-9030 . . . . . . . 2-168 00-754-0847 . . . . . . . 2-141
2-211
Page Page Page Page

00-754-1082 . . . . . . . 2-169 00-763-3925 . . . . . . . 2-67 00-770-1896 . . . . . . . 2-66 00-781-1897 . . . . . . . 2-66
00-754-1083 . . . . . . . 2-169 00-763-6009 . . . . . . . 2-26 00-770-2533 . . . . . . . 2-24 00-781-1992 . . . . . . . 2-74
00-754-1678 . . . . . . . 2-141 00-763-6961 . . . . . . . 2-24 00-770-2579 . . . . . . . 2-24 00-781-2004 . . . . . . . 2-74
00-754-1788 . . . . . . . 2-42 00-763-6962 . . . . . . . 2-24 00-770-2580 . . . . . . . 2-24 00-781-2034 . . . . . . . 2-74
00-754-1794 . . . . . . . 2-42 00-763-6963 . . . . . . . 2-24 00-770-4949 . . . . . . . 2-163 00-781-3927 . . . . . . . 2-14
00-754-1817 . . . . . . . 2-141 00-763-7822 . . . . . . . 2-24 00-770-9180 . . . . . . . 2-135 00-781-3928 . . . . . . . 2-14
00-754-1854 . . . . . . . 2-79 00-763-7830 . . . . . . . 2-25 00-770-9181 . . . . . . . 2-80 00-781-4524 . . . . . . . 2-130
00-754-1896 . . . . . . . 2-169 00-763-7832 . . . . . . . 2-25 00-770-9340 . . . . . . . 2-97 00-781-4761 . . . . . . . 2-95
00-754-1976 . . . . . . . 2-141 00-763-8901 . . . . . . . 2-56 00-771-3340 . . . . . . . 2-93 00-781-4844 . . . . . . . 2-58
00-754-2005 . . . . . . . 2-69 00-763-8905 . . . . . . . 2-56 00-771-4271 . . . . . . . 2-155 00-781-4861 . . . . . . . 2-161
00-754-2064 . . . . . . . 2-17 00-763-8911 . . . . . . . 2-56 00-771-6827 . . . . . . . 2-64 00-781-5642 . . . . . . . 2-104
00-754-2190 . . . . . . . 2-169 00-763-8913 . . . . . . . 2-56 00-771-7359 . . . . . . . 2-63 00-781-5662 . . . . . . . 2-26
00-754-3046 . . . . . . . 2-17 00-763-8920 . . . . . . . 2-56 00-771-7406 . . . . . . . 2-63 00-781-5663 . . . . . . . 2-21
00-754-3048 . . . . . . . 2-42 00-763-8921 . . . . . . . 2-56 00-772-3720 . . . . . . . 2-63 00-781-5664 . . . . . . . 2-21
00-754-3049 . . . . . . . 2-42 00-763-8922 . . . . . . . 2-56 00-772-4849 . . . . . . . 2-141 00-781-5673 . . . . . . . 2-26
00-756-5866 . . . . . . . 2-184 00-763-9651 . . . . . . . 2-104 00-772-7512 . . . . . . . 2-146 00-781-9057 . . . . . . . 2-22
00-756-8141 . . . . . . . 2-64 . . . . . . . 2-104 00-772-9259 . . . . . . . 2-59 00-781-9478 . . . . . . . 2-21
00-757-3234 . . . . . . . 2-172 00-764-0066 . . . . . . . 2-24 00-773-7618 . . . . . . . 2-66 00-781-9483 . . . . . . . 2-67
00-757-4125 . . . . . . . 2-46 00-764-0068 . . . . . . . 2-24 00-773-7624 . . . . . . . 2-67 00-782-1349 . . . . . . . 2-66
00-758-1034 . . . . . . . 2-172 00-764-0070 . . . . . . . 2-24 00-773-8635 . . . . . . . 2-63 00-782-8245 . . . . . . . 2-20
00-759-0562 . . . . . . . 2-159 00-764-0071 . . . . . . . 2-24 00-774-9427 . . . . . . . 2-70 00-782-8511 . . . . . . . 2-172
00-759-0563 . . . . . . . 2-163 00-764-2391 . . . . . . . 2-63 00-774-9430 . . . . . . . 2-97 00-782-8737 . . . . . . . 2-136
00-759-0564 . . . . . . . 2-159 00-764-2392 . . . . . . . 2-63 00-774-9545 . . . . . . . 2-67 00-782-9378 . . . . . . . 2-48
00-759-1687 . . . . . . . 2-124 00-764-2865 . . . . . . . 2-161 00-774-9700 . . . . . . . 2-25 00-782-9380 . . . . . . . 2-48
00-759-1692 . . . . . . . 2-124 00-764-2964 . . . . . . . 2-24 00-775-2567 . . . . . . . 2-63 00-782-9441 . . . . . . . 2-115
00-759-2022 . . . . . . . 2-124 00-764-2966 . . . . . . . 2-24 00-775-5071 . . . . . . . 2-168 00-782-9489 . . . . . . . 2-14
00-759-2113 . . . . . . . 2-124 00-764-6236 . . . . . . . 2-146 00-775-6235 . . . . . . . 2-41 00-783-0075 . . . . . . . 2-60
00-759-2121 . . . . . . . 2-124 00-764-6583 . . . . . . . 2-56 00-775-6243 . . . . . . . 2-41 00-783-4174 . . . . . . . 2-63
00-760-2683 . . . . . . . 2-145 00-764-6609 . . . . . . . 2-56 00-775-6436 . . . . . . . 2-94 00-783-6825 . . . . . . . 2-67
00-760-5719 . . . . . . . 2-118 00-764-6610 . . . . . . . 2-56 00-776-7182 . . . . . . . 2-104 00-784-7127 . . . . . . . 2-66
00-760-9241 . . . . . . . 2-136 00-764-7282 . . . . . . . 2-63 00-777-5503 . . . . . . . 2-103 00-784-7442 . . . . . . . 2-81
00-761-1985 . . . . . . . 2-175 00-764-7283 . . . . . . . 2-63 00-777-5787 . . . . . . . 2-63 00-784-8145 . . . . . . . 2-63
00-761-3706 . . . . . . . 2-56 00-764-9328 . . . . . . . 2-68 00-777-5791 . . . . . . . 2-63 00-785-1755 . . . . . . . 2-64
00-761-4134 . . . . . . . 2-161 00-764-9564 . . . . . . . 2-66 00-777-5793 . . . . . . . 2-63 00-785-9352 . . . . . . . 2-36
00-761-4221 . . . . . . . 2-63 00-765-0038 . . . . . . . 2-76 00-777-5984 . . . . . . . 2-21 00-786-2229 . . . . . . . 2-183
00-761-6830 . . . . . . . 2-63 00-765-1948 . . . . . . . 2-124 00-777-6039 . . . . . . . 2-24 00-786-5503 . . . . . . . 2-32
00-761-6882 . . . . . . . 2-56 00-765-2190 . . . . . . . 2-77 00-778-2655 . . . . . . . 2-63 00-786-6501 . . . . . . . 2-31
00-761-7471 . . . . . . . 2-142 00-765-4244 . . . . . . . 2-24 00-778-9160 . . . . . . . 2-63 00-787-0148 . . . . . . . 2-141
00-762-1489 . . . . . . . 2-156 00-765-4257 . . . . . . . 2-24 00-778-9480 . . . . . . . 2-63 00-787-2237 . . . . . . . 2-43
00-762-1493 . . . . . . . 2-155 00-765-4344 . . . . . . . 2-24 00-778-9482 . . . . . . . 2-63 00-787-8677 . . . . . . . 2-96
00-762-6241 . . . . . . . 2-56 00-765-4350 . . . . . . . 2-24 00-779-0293 . . . . . . . 2-85 00-788-0416 . . . . . . . 2-142
00-762-6242 . . . . . . . 2-56 00-765-4352 . . . . . . . 2-24 00-779-0921 . . . . . . . 2-69 00-788-1377 . . . . . . . 2-138
00-762-6248 . . . . . . . 2-56 00-767-0445 . . . . . . . 2-56 00-779-3601 . . . . . . . 2-63 00-788-1378 . . . . . . . 2-162
00-762-6388 . . . . . . . 2-97 00-767-5997 . . . . . . . 2-99 00-779-6260 . . . . . . . 2-104 00-788-1380 . . . . . . . 2-138
00-762-7482 . . . . . . . 2-28 00-767-5998 . . . . . . . 2-99 00-779-6594 . . . . . . . 2-63 00-788-8385 . . . . . . . 2-144
00-762-9964 . . . . . . . 2-120 00-767-6007 . . . . . . . 2-99 00-779-6625 . . . . . . . 2-63 00-788-8713 . . . . . . . 2-116
00-763-0074 . . . . . . . 2-124 00-767-9425 . . . . . . . 2-66 00-780-1044 . . . . . . . 2-63 00-789-2077 . . . . . . . 2-87
00-763-0595 . . . . . . . 2-173 00-768-0318 . . . . . . . 2-56 00-780-4078 . . . . . . . 2-139 00-789-2256 . . . . . . . 2-36
00-763-0596 . . . . . . . 2-173 00-768-0319 . . . . . . . 2-56 00-780-8454 . . . . . . . 2-21 00-790-1901 . . . . . . . 2-2
00-763-0597 . . . . . . . 2-173 00-768-0321 . . . . . . . 2-56 00-780-9545 . . . . . . . 2-95 00-791-8501 . . . . . . . 2-65
00-763-2641 . . . . . . . 2-78 00-768-0336 . . . . . . . 2-24 00-780-9640 . . . . . . . 2-169 00-792-8362 . . . . . . . 2-171
00-763-3356 . . . . . . . 2-24 00-768-7737 . . . . . . . 2-165 00-781-1251 . . . . . . . 2-96 00-792-9020 . . . . . . . 2-138
00-763-3413 . . . . . . . 2-66 00-769-8489 . . . . . . . 2-146 00-781-1252 . . . . . . . 2-96 00-792-9028 . . . . . . . 2-173
2-212
Page Page Page Page

00-792-9771 . . . . . . . 2-161 00-804-2025 . . . . . . . 2-170 00-807-1474 . . . . . . . 2-61 00-810-7199 . . . . . . . 2-65
00-792-9841 . . . . . . . 2-130 00-804-2026 . . . . . . . 2-170 00-807-1475 . . . . . . . 2-61 00-810-7637 . . . . . . . 2-31
00-792-9948 . . . . . . . 2-174 00-804-2027 . . . . . . . 2-93 00-807-1476 . . . . . . . 2-61 00-810-8134 . . . . . . . 2-104
00-793-0003 . . . . . . . 2-155 00-804-2244 . . . . . . . 2-135 00-807-1477 . . . . . . . 2-61 00-810-8932 . . . . . . . 2-170
00-794-0506 . . . . . . . 2-163 00-804-2275 . . . . . . . 2-169 00-807-2636 . . . . . . . 2-169 00-810-9423 . . . . . . . 2-174
00-794-2742 . . . . . . . 2-93 00-804-2276 . . . . . . . 2-169 00-807-5330 . . . . . . . 2-94 00-811-1232 . . . . . . . 2-80
00-794-5949 . . . . . . . 2-68 00-804-2660 . . . . . . . 2-5 00-807-5331 . . . . . . . 2-169 00-811-1233 . . . . . . . 2-80
00-795-0719 . . . . . . . 2-91 00-804-2769 . . . . . . . 2-169 00-807-5333 . . . . . . . 2-169 00-811-1241 . . . . . . . 2-80
00-796-4354 . . . . . . . 2-133 00-804-2770 . . . . . . . 2-169 00-807-6895 . . . . . . . 2-42 00-811-1256 . . . . . . . 2-80
00-796-4415 . . . . . . . 2-62 00-804-2771 . . . . . . . 2-169 00-807-7968 . . . . . . . 2-169 00-811-1265 . . . . . . . 2-80
00-797-7466 . . . . . . . 2-111 00-804-2772 . . . . . . . 2-169 00-807-7975 . . . . . . . 2-36 00-811-1266 . . . . . . . 2-80
00-799-1019 . . . . . . . 2-96 00-804-2773 . . . . . . . 2-169 00-808-1805 . . . . . . . 2-125 00-811-1270 . . . . . . . 2-80
00-800-6274 . . . . . . . 2-85 00-804-2777 . . . . . . . 2-169 00-808-2335 . . . . . . . 2-126 00-811-1970 . . . . . . . 2-91
00-800-6275 . . . . . . . 2-85 00-804-2781 . . . . . . . 2-169 00-808-2337 . . . . . . . 2-126 00-811-3494 . . . . . . . 2-61
00-800-6277 . . . . . . . 2-85 00-804-2782 . . . . . . . 2-169 00-808-2339 . . . . . . . 2-126 00-811-4067 . . . . . . . 2-17
00-800-6278 . . . . . . . 2-85 00-804-2784 . . . . . . . 2-169 00-808-2340 . . . . . . . 2-126 00-811-4073 . . . . . . . 2-169
00-800-7261 . . . . . . . 2-35 00-804-2786 . . . . . . . 2-169 00-808-4467 . . . . . . . 2-127 00-811-4102 . . . . . . . 2-169
00-800-7874 . . . . . . . 2-141 00-804-3891 . . . . . . . 2-169 00-808-6361 . . . . . . . 2-41 00-811-5032 . . . . . . . 2-17
00-800-9677 . . . . . . . 2-66 00-804-3892 . . . . . . . 2-169 00-808-7595 . . . . . . . 2-130 00-811-6419 . . . . . . . 2-61
00-800-9720 . . . . . . . 2-126 00-804-4997 . . . . . . . 2-169 00-808-7822 . . . . . . . 2-86 00-811-6669 . . . . . . . 2-31
00-800-9721 . . . . . . . 2-126 00-804-5827 . . . . . . . 2-169 00-808-7832 . . . . . . . 2-25 00-811-6951 . . . . . . . 2-24
00-801-2500 . . . . . . . 2-169 00-804-6813 . . . . . . . 2-129 00-808-7834 . . . . . . . 2-25 00-811-6953 . . . . . . . 2-24
00-801-3001 . . . . . . . 2-164 00-804-6855 . . . . . . . 2-169 00-808-7913 . . . . . . . 2-170 00-811-7105 . . . . . . . 2-172
00-801-3440 . . . . . . . 2-126 00-804-6860 . . . . . . . 2-169 00-808-9685 . . . . . . . 2-80 00-811-8050 . . . . . . . 2-60
00-801-7545 . . . . . . . 2-138 00-804-7645 . . . . . . . 2-170 00-808-9977 . . . . . . . 2-24 00-811-9219 . . . . . . . 2-42
00-802-1835 . . . . . . . 2-139 00-804-7653 . . . . . . . 2-170 00-809-0007 . . . . . . . 2-170 00-811-9853 . . . . . . . 2-24
00-802-1837 . . . . . . . 2-77 00-804-9642 . . . . . . . 2-96 00-809-1936 . . . . . . . 2-37 00-812-0142 . . . . . . . 2-82
00-802-2938 . . . . . . . 2-80 00-804-9735 . . . . . . . 2-169 00-809-1997 . . . . . . . 2-115 00-812-1204 . . . . . . . 2-80
00-802-4701 . . . . . . . 2-66 00-804-9738 . . . . . . . 2-169 00-809-2189 . . . . . . . 2-135 00-812-1894 . . . . . . . 2-141
00-802-8860 . . . . . . . 2-17 00-804-9739 . . . . . . . 2-169 00-809-2587 . . . . . . . 2-126 00-812-2305 . . . . . . . 2-48
00-803-1302 . . . . . . . 2-104 00-804-9743 . . . . . . . 2-169 00-809-3078 . . . . . . . 2-66 00-812-2928 . . . . . . . 2-104
00-803-5536 . . . . . . . 2-164 00-805-1398 . . . . . . . 2-169 00-809-3079 . . . . . . . 2-66 00-812-3312 . . . . . . . 2-79
00-803-5574 . . . . . . . 2-141 00-805-1403 . . . . . . . 2-166 00-809-4390 . . . . . . . 2-144 00-812-3741 . . . . . . . 2-80
00-803-7108 . . . . . . . 2-43 00-805-6646 . . . . . . . 2-166 00-809-5997 . . . . . . . 2-66 00-812-3750 . . . . . . . 2-80
00-803-7299 . . . . . . . 2-170 00-806-0202 . . . . . . . 2-169 00-809-5998 . . . . . . . 2-66 00-812-3757 . . . . . . . 2-80
00-803-7301 . . . . . . . 2-170 00-806-1806 . . . . . . . 2-173 00-809-6312 . . . . . . . 2-183 00-812-3759 . . . . . . . 2-80
00-803-7303 . . . . . . . 2-170 00-806-2206 . . . . . . . 2-43 00-809-6315 . . . . . . . 2-183 00-812-3764 . . . . . . . 2-80
00-803-7304 . . . . . . . 2-170 00-806-2582 . . . . . . . 2-16 00-809-7616 . . . . . . . 2-59 00-812-3766 . . . . . . . 2-80
00-803-7305 . . . . . . . 2-170 00-806-2623 . . . . . . . 2-86 00-809-8536 . . . . . . . 2-66 00-812-3775 . . . . . . . 2-80
00-803-7306 . . . . . . . 2-170 00-806-3947 . . . . . . . 2-76 00-809-8544 . . . . . . . 2-66 00-812-3874 . . . . . . . 2-135
00-803-7313 . . . . . . . 2-170 00-806-6648 . . . . . . . 2-108 00-809-8546 . . . . . . . 2-66 00-812-4294 . . . . . . . 2-58
00-803-7315 . . . . . . . 2-170 00-806-7040 . . . . . . . 2-81 00-810-0599 . . . . . . . 2-174 00-812-4474 . . . . . . . 2-66
00-803-7316 . . . . . . . 2-170 00-806-9864 . . . . . . . 2-98 00-810-1786 . . . . . . . 2-61 00-812-4658 . . . . . . . 2-78
00-803-7319 . . . . . . . 2-170 00-807-0928 . . . . . . . 2-79 00-810-3490 . . . . . . . 2-8 00-812-6962 . . . . . . . 2-35
00-804-0768 . . . . . . . 2-134 00-807-1213 . . . . . . . 2-45 00-810-3701 . . . . . . . 2-78 00-812-7815 . . . . . . . 2-104
00-804-0790 . . . . . . . 2-134 00-807-1465 . . . . . . . 2-61 00-810-3702 . . . . . . . 2-78 00-812-8644 . . . . . . . 2-27
00-804-0995 . . . . . . . 2-146 00-807-1466 . . . . . . . 2-61 00-810-3704 . . . . . . . 2-78 00-813-2078 . . . . . . . 2-156
00-804-1224 . . . . . . . 2-144 00-807-1467 . . . . . . . 2-61 00-810-3765 . . . . . . . 2-41 00-813-2791 . . . . . . . 2-22
00-804-1229 . . . . . . . 2-144 00-807-1468 . . . . . . . 2-61 00-810-4188 . . . . . . . 2-135 00-813-2796 . . . . . . . 2-22
00-804-1230 . . . . . . . 2-144 00-807-1469 . . . . . . . 2-61 00-810-5543 . . . . . . . 2-24 00-813-3678 . . . . . . . 2-175
00-804-1236 . . . . . . . 2-144 00-807-1471 . . . . . . . 2-61 00-810-6492 . . . . . . . 2-94 00-813-3792 . . . . . . . 2-12
00-804-1238 . . . . . . . 2-144 00-807-1472 . . . . . . . 2-61 00-810-6721 . . . . . . . 2-46 00-813-6053 . . . . . . . 2-133
00-804-1245 . . . . . . . 2-144 00-807-1473 . . . . . . . 2-61 00-810-6752 . . . . . . . 2-173 00-813-6054 . . . . . . . 2-133
2-213
Page Page Page Page

00-813-6055 . . . . . . . 2-133 00-819-2685 . . . . . . . 2-47 00-824-6232 . . . . . . . 2-22 00-833-3608 . . . . . . . 2-155
00-813-6056 . . . . . . . 2-133 00-819-4641 . . . . . . . 2-126 00-825-2945 . . . . . . . 2-60 00-833-3771 . . . . . . . 2-108
00-813-6058 . . . . . . . 2-133 00-819-6449 . . . . . . . 2-49 00-825-4422 . . . . . . . 2-42 00-833-4210 . . . . . . . 2-126
00-813-6947 . . . . . . . 2-90 00-819-7378 . . . . . . . 2-96 00-825-4826 . . . . . . . 2-141 00-833-6516 . . . . . . . 2-160
00-813-6950 . . . . . . . 2-61 00-820-2144 . . . . . . . 2-22 00-825-6503 . . . . . . . 2-139 00-833-7454 . . . . . . . 2-169
00-814-0666 . . . . . . . 2-174 00-820-4019 . . . . . . . 2-126 00-825-6504 . . . . . . . 2-139 00-833-8624 . . . . . . . 2-29
00-814-1926 . . . . . . . 2-18 00-820-4142 . . . . . . . 2-126 00-825-8353 . . . . . . . 2-80 00-833-9102 . . . . . . . 2-91
00-814-2371 . . . . . . . 2-126 00-820-4535 . . . . . . . 2-165 00-825-8888 . . . . . . . 2-103 00-833-9185 . . . . . . . 2-158
00-814-2372 . . . . . . . 2-126 00-820-6653 . . . . . . . 2-69 00-826-1633 . . . . . . . 2-17 00-834-0509 . . . . . . . 2-175
00-814-3530 . . . . . . . 2-78 00-820-7022 . . . . . . . 2-66 00-826-1848 . . . . . . . 2-78 00-834-1376 . . . . . . . 2-47
00-814-3531 . . . . . . . 2-78 00-820-9846 . . . . . . . 2-126 00-826-3251 . . . . . . . 2-79 00-834-3388 . . . . . . . 2-15
00-814-4342 . . . . . . . 2-158 00-821-0304 . . . . . . . 2-135 00-826-5368 . . . . . . . 2-3 00-834-6675 . . . . . . . 2-127
00-814-4456 . . . . . . . 2-79 00-821-1508 . . . . . . . 2-126 00-826-6181 . . . . . . . 2-138 00-834-6676 . . . . . . . 2-126
00-814-7330 . . . . . . . 2-47 00-821-2838 . . . . . . . 2-18 00-826-7009 . . . . . . . 2-12 00-834-6679 . . . . . . . 2-127
00-814-9196 . . . . . . . 2-104 00-821-2839 . . . . . . . 2-18 00-826-8298 . . . . . . . 2-8 00-834-8372 . . . . . . . 2-141
00-814-9865 . . . . . . . 2-141 00-821-3597 . . . . . . . 2-35 00-827-0707 . . . . . . . 2-8 00-835-1240 . . . . . . . 2-78
00-815-0870 . . . . . . . 2-93 00-821-3869 . . . . . . . 2-14 00-827-1972 . . . . . . . 2-42 00-835-2124 . . . . . . . 2-173
00-815-0890 . . . . . . . 2-135 00-821-4253 . . . . . . . 2-97 00-827-3262 . . . . . . . 2-170 00-835-2504 . . . . . . . 2-167
00-815-1041 . . . . . . . 2-60 00-821-4995 . . . . . . . 2-87 00-827-4024 . . . . . . . 2-141 00-835-3638 . . . . . . . 2-138
00-815-1405 . . . . . . . 2-75 00-821-8848 . . . . . . . 2-126 00-827-4095 . . . . . . . 2-163 00-835-4473 . . . . . . . 2-59
00-815-4929 . . . . . . . 2-141 00-821-8849 . . . . . . . 2-126 00-827-4562 . . . . . . . 2-173 00-835-4911 . . . . . . . 2-174
00-815-4930 . . . . . . . 2-141 00-822-0991 . . . . . . . 2-126 00-827-7071 . . . . . . . 2-17 00-835-7712 . . . . . . . 2-126
00-815-5050 . . . . . . . 2-17 00-822-1780 . . . . . . . 2-31 00-827-7604 . . . . . . . 2-78 00-836-0474 . . . . . . . 2-67
00-815-6552 . . . . . . . 2-107 00-822-2024 . . . . . . . 2-47 00-827-9138 . . . . . . . 2-58 00-836-2099 . . . . . . . 2-110
00-816-0033 . . . . . . . 2-21 00-822-2136 . . . . . . . 2-169 00-827-9286 . . . . . . . 2-60 00-836-2100 . . . . . . . 2-110
00-816-1145 . . . . . . . 2-167 00-822-5853 . . . . . . . 2-12 00-827-9941 . . . . . . . 2-47 00-836-2458 . . . . . . . 2-69
00-816-1146 . . . . . . . 2-167 00-822-8525 . . . . . . . 2-70 00-828-2035 . . . . . . . 2-104 00-836-3941 . . . . . . . 2-145
00-816-1148 . . . . . . . 2-167 00-823-4821 . . . . . . . 2-76 00-828-4182 . . . . . . . 2-112 00-836-6092 . . . . . . . 2-127
00-816-1149 . . . . . . . 2-167 00-823-5698 . . . . . . . 2-47 00-828-4183 . . . . . . . 2-112 00-836-9268 . . . . . . . 2-154
00-816-1152 . . . . . . . 2-167 00-823-5719 . . . . . . . 2-36 00-828-4184 . . . . . . . 2-112 00-837-3116 . . . . . . . 2-135
00-816-1155 . . . . . . . 2-167 00-823-5794 . . . . . . . 2-23 00-828-4185 . . . . . . . 2-112 00-837-3338 . . . . . . . 2-174
00-816-1156 . . . . . . . 2-167 00-823-8634 . . . . . . . 2-80 00-828-4527 . . . . . . . 2-112 00-837-3343 . . . . . . . 2-25
00-816-1158 . . . . . . . 2-167 00-823-8740 . . . . . . . 2-79 00-828-4531 . . . . . . . 2-112 00-837-4545 . . . . . . . 2-78
00-816-1794 . . . . . . . 2-75 00-823-8742 . . . . . . . 2-79 00-828-6167 . . . . . . . 2-47 00-837-8352 . . . . . . . 2-174
00-816-2552 . . . . . . . 2-47 00-823-8743 . . . . . . . 2-79 00-828-8189 . . . . . . . 2-59 00-837-9408 . . . . . . . 2-135
00-816-3128 . . . . . . . 2-47 00-823-8744 . . . . . . . 2-79 00-828-8190 . . . . . . . 2-75 00-838-0422 . . . . . . . 2-168
00-816-3424 . . . . . . . 2-134 00-823-8745 . . . . . . . 2-79 00-828-8526 . . . . . . . 2-165 00-838-1084 . . . . . . . 2-149
00-816-4239 . . . . . . . 2-170 00-823-8746 . . . . . . . 2-79 00-828-8748 . . . . . . . 2-110 00-838-1085 . . . . . . . 2-149
00-816-4794 . . . . . . . 2-81 00-823-8747 . . . . . . . 2-79 00-828-8802 . . . . . . . 2-144 00-838-1086 . . . . . . . 2-149
00-816-5300 . . . . . . . 2-67 00-823-8754 . . . . . . . 2-79 00-829-0413 . . . . . . . 2-30 00-838-1087 . . . . . . . 2-149
00-816-9761 . . . . . . . 2-81 00-823-8803 . . . . . . . 2-66 00-829-1318 . . . . . . . 2-70 00-838-1550 . . . . . . . 2-175
00-817-0727 . . . . . . . 2-78 00-823-8804 . . . . . . . 2-66 00-829-2141 . . . . . . . 2-141 00-838-1591 . . . . . . . 2-137
00-817-1327 . . . . . . . 2-171 00-823-8815 . . . . . . . 2-51 00-829-2606 . . . . . . . 2-118 00-838-1618 . . . . . . . 2-45
00-817-5973 . . . . . . . 2-17 00-823-8835 . . . . . . . 2-62 00-829-2607 . . . . . . . 2-118 00-838-1766 . . . . . . . 2-153
00-817-6295 . . . . . . . 2-163 00-824-2020 . . . . . . . 2-21 00-829-2608 . . . . . . . 2-118 00-838-1787 . . . . . . . 2-97
00-817-7593 . . . . . . . 2-157 00-824-2021 . . . . . . . 2-21 00-829-5543 . . . . . . . 2-160 00-838-2830 . . . . . . . 2-153
00-817-9056 . . . . . . . 2-56 00-824-2022 . . . . . . . 2-21 00-829-9930 . . . . . . . 2-103 00-838-4774 . . . . . . . 2-173
00-817-9966 . . . . . . . 2-56 00-824-2023 . . . . . . . 2-21 00-829-9981 . . . . . . . 2-57 00-838-5266 . . . . . . . 2-144
00-818-0282 . . . . . . . 2-160 00-824-2024 . . . . . . . 2-21 00-831-2336 . . . . . . . 2-67 00-838-5267 . . . . . . . 2-144
00-818-0872 . . . . . . . 2-93 00-824-2025 . . . . . . . 2-21 00-832-9829 . . . . . . . 2-66 00-838-6978 . . . . . . . 2-155
00-818-7478 . . . . . . . 2-130 00-824-2026 . . . . . . . 2-21 00-832-9849 . . . . . . . 2-34 00-838-7329 . . . . . . . 2-18
00-818-8087 . . . . . . . 2-170 00-824-2028 . . . . . . . 2-21 00-833-2583 . . . . . . . 2-64 00-838-8576 . . . . . . . 2-98
00-818-9616 . . . . . . . 2-104 00-824-3279 . . . . . . . 2-171 00-833-3467 . . . . . . . 2-77 00-838-8779 . . . . . . . 2-106
2-214
Page Page Page Page

00-838-9696 . . . . . . . 2-138 00-842-7492 . . . . . . . 2-22 00-846-0504 . . . . . . . 2-119 00-850-9799 . . . . . . . 2-156
00-838-9773 . . . . . . . 2-126 00-842-8342 . . . . . . . 2-126 00-846-1592 . . . . . . . 2-119 00-851-0913 . . . . . . . 2-65
00-839-0762 . . . . . . . 2-22 00-843-0003 . . . . . . . 2-141 00-846-2140 . . . . . . . 2-78 00-851-1826 . . . . . . . 2-119
00-839-0901 . . . . . . . 2-78 00-843-1156 . . . . . . . 2-104 00-846-2142 . . . . . . . 2-78 00-851-2682 . . . . . . . 2-57
00-839-1758 . . . . . . . 2-46 00-843-1523 . . . . . . . 2-167 00-846-2143 . . . . . . . 2-78 00-851-3066 . . . . . . . 2-165
00-839-1759 . . . . . . . 2-46 00-843-2841 . . . . . . . 2-35 00-846-2925 . . . . . . . 2-67 00-852-4230 . . . . . . . 2-119
00-839-1846 . . . . . . . 2-126 00-843-3137 . . . . . . . 2-105 00-846-4632 . . . . . . . 2-67 00-853-0661 . . . . . . . 2-77
00-839-2017 . . . . . . . 2-59 00-843-7986 . . . . . . . 2-78 00-846-4680 . . . . . . . 2-106 00-853-2325 . . . . . . . 2-78
00-839-2325 . . . . . . . 2-75 00-843-7987 . . . . . . . 2-78 00-846-5703 . . . . . . . 2-14 00-853-4090 . . . . . . . 2-62
00-839-2326 . . . . . . . 2-75 00-843-9474 . . . . . . . 2-46 00-846-5997 . . . . . . . 2-78 00-853-4152 . . . . . . . 2-126
00-839-3437 . . . . . . . 2-21 00-843-9498 . . . . . . . 2-79 00-846-8966 . . . . . . . 2-138 00-853-4272 . . . . . . . 2-119
00-839-3749 . . . . . . . 2-140 00-843-9719 . . . . . . . 2-127 00-846-8978 . . . . . . . 2-158 00-853-9191 . . . . . . . 2-118
00-839-4513 . . . . . . . 2-23 00-843-9726 . . . . . . . 2-126 00-846-9229 . . . . . . . 2-175 00-853-9693 . . . . . . . 2-155
00-839-5820 . . . . . . . 2-75 00-844-0341 . . . . . . . 2-79 00-846-9547 . . . . . . . 2-41 00-854-0367 . . . . . . . 2-56
00-839-5822 . . . . . . . 2-75 00-844-0342 . . . . . . . 2-79 00-846-9841 . . . . . . . 2-104 00-854-0684 . . . . . . . 2-45
00-839-5866 . . . . . . . 2-103 00-844-0751 . . . . . . . 2-110 00-847-0102 . . . . . . . 2-138 00-854-6692 . . . . . . . 2-32
00-839-7090 . . . . . . . 2-22 00-844-0752 . . . . . . . 2-106 00-847-0734 . . . . . . . 2-141 00-854-6701 . . . . . . . 2-138
00-839-7795 . . . . . . . 2-127 00-844-0753 . . . . . . . 2-106 00-847-1159 . . . . . . . 2-12 00-854-9868 . . . . . . . 2-161
00-839-8253 . . . . . . . 2-66 00-844-1692 . . . . . . . 2-106 00-847-2605 . . . . . . . 2-142 00-855-0805 . . . . . . . 2-135
00-839-9448 . . . . . . . 2-153 00-844-1693 . . . . . . . 2-106 00-847-3735 . . . . . . . 2-78 00-855-0972 . . . . . . . 2-32
00-840-0907 . . . . . . . 2-79 00-844-1694 . . . . . . . 2-106 00-847-4890 . . . . . . . 2-104 00-855-1444 . . . . . . . 2-31
00-840-2127 . . . . . . . 2-66 00-844-1695 . . . . . . . 2-106 00-847-6222 . . . . . . . 2-105 00-855-3430 . . . . . . . 2-126
00-840-5872 . . . . . . . 2-57 00-844-1696 . . . . . . . 2-106 00-848-6017 . . . . . . . 2-135 00-855-3610 . . . . . . . 2-42
00-840-5895 . . . . . . . 2-22 00-844-1697 . . . . . . . 2-106 00-848-7045 . . . . . . . 2-49 . . . . . . . 2-43
00-840-6030 . . . . . . . 2-95 00-844-2907 . . . . . . . 2-106 00-848-8952 . . . . . . . 2-105 00-855-6803 . . . . . . . 2-75
00-840-6884 . . . . . . . 2-34 00-844-3302 . . . . . . . 2-60 00-848-9128 . . . . . . . 2-126 00-855-6804 . . . . . . . 2-75
00-840-7162 . . . . . . . 2-91 00-844-3763 . . . . . . . 2-97 00-848-9282 . . . . . . . 2-15 00-855-6805 . . . . . . . 2-75
00-840-7165 . . . . . . . 2-91 00-844-3939 . . . . . . . 2-78 00-849-1984 . . . . . . . 2-70 00-856-4682 . . . . . . . 2-173
00-841-1390 . . . . . . . 2-77 00-844-3940 . . . . . . . 2-78 00-849-2283 . . . . . . . 2-175 00-857-2450 . . . . . . . 2-181
00-841-1977 . . . . . . . 2-175 00-844-3943 . . . . . . . 2-78 00-849-4001 . . . . . . . 2-92 00-857-4392 . . . . . . . 2-181
00-841-2282 . . . . . . . 2-114 00-844-3956 . . . . . . . 2-78 00-849-4642 . . . . . . . 2-22 00-857-4393 . . . . . . . 2-181
00-841-2331 . . . . . . . 2-94 00-844-3963 . . . . . . . 2-78 00-849-6720 . . . . . . . 2-118 00-857-4959 . . . . . . . 2-61
00-841-2942 . . . . . . . 2-22 00-844-4790 . . . . . . . 2-78 00-849-6726 . . . . . . . 2-119 00-857-4960 . . . . . . . 2-61
00-841-2948 . . . . . . . 2-22 00-844-4872 . . . . . . . 2-60 00-849-6735 . . . . . . . 2-119 00-857-5547 . . . . . . . 2-61
00-841-3998 . . . . . . . 2-34 00-844-5644 . . . . . . . 2-79 00-849-6895 . . . . . . . 2-57 00-857-5548 . . . . . . . 2-61
00-841-4442 . . . . . . . 2-79 00-844-6796 . . . . . . . 2-78 00-849-7253 . . . . . . . 2-175 00-857-5561 . . . . . . . 2-62
00-841-4443 . . . . . . . 2-79 00-845-1877 . . . . . . . 2-66 00-849-8352 . . . . . . . 2-118 00-857-5861 . . . . . . . 2-114
00-841-5181 . . . . . . . 2-15 00-845-2072 . . . . . . . 2-137 00-849-9347 . . . . . . . 2-47 00-857-6658 . . . . . . . 2-167
00-841-5220 . . . . . . . 2-184 00-845-2359 . . . . . . . 2-61 00-849-9850 . . . . . . . 2-183 00-857-6664 . . . . . . . 2-119
00-841-5222 . . . . . . . 2-184 00-845-3502 . . . . . . . 2-166 00-849-9851 . . . . . . . 2-75 00-857-6822 . . . . . . . 2-25
00-841-5700 . . . . . . . 2-58 00-845-4232 . . . . . . . 2-79 00-850-3225 . . . . . . . 2-85 00-857-7175 . . . . . . . 2-119
00-841-9014 . . . . . . . 2-163 00-845-4955 . . . . . . . 2-42 00-850-3233 . . . . . . . 2-85 00-859-0719 . . . . . . . 2-66
00-841-9959 . . . . . . . 2-126 00-845-5016 . . . . . . . 2-127 00-850-3241 . . . . . . . 2-85 00-860-3956 . . . . . . . 2-40
00-842-0241 . . . . . . . 2-22 00-845-5030 . . . . . . . 2-61 00-850-3247 . . . . . . . 2-85 00-860-5084 . . . . . . . 2-174
00-842-0669 . . . . . . . 2-172 00-845-7787 . . . . . . . 2-75 00-850-3266 . . . . . . . 2-85 00-860-6605 . . . . . . . 2-85
00-842-1490 . . . . . . . 2-59 00-845-9890 . . . . . . . 2-79 00-850-3267 . . . . . . . 2-85 00-861-4114 . . . . . . . 2-90
00-842-1879 . . . . . . . 2-97 00-845-9892 . . . . . . . 2-78 00-850-3282 . . . . . . . 2-85 00-862-9391 . . . . . . . 2-114
00-842-3044 . . . . . . . 2-75 00-846-0126 . . . . . . . 2-75 00-850-3501 . . . . . . . 2-129 00-864-6097 . . . . . . . 2-83
00-842-3111 . . . . . . . 2-153 00-846-0499 . . . . . . . 2-119 00-850-3502 . . . . . . . 2-129 00-864-6099 . . . . . . . 2-83
00-842-3203 . . . . . . . 2-119 00-846-0500 . . . . . . . 2-119 00-850-5754 . . . . . . . 2-79 00-865-3754 . . . . . . . 2-81
00-842-3410 . . . . . . . 2-30 00-846-0501 . . . . . . . 2-119 00-850-6876 . . . . . . . 2-59 00-865-5689 . . . . . . . 2-151
00-842-5505 . . . . . . . 2-126 00-846-0502 . . . . . . . 2-119 00-850-7490 . . . . . . . 2-126 00-865-8994 . . . . . . . 2-85
00-842-5920 . . . . . . . 2-141 00-846-0503 . . . . . . . 2-119 00-850-7491 . . . . . . . 2-126 00-866-0660 . . . . . . . 2-105
2-215
Page Page Page Page

00-866-0937 . . . . . . . 2-22 00-881-0715 . . . . . . . 2-63 00-889-3002 . . . . . . . 2-22 00-899-4119 . . . . . . . 2-75
00-866-1729 . . . . . . . 2-20 00-881-0722 . . . . . . . 2-155 . . . . . . . 2-28 00-899-6728 . . . . . . . 2-127
00-866-3810 . . . . . . . 2-96 00-881-0943 . . . . . . . 2-60 00-889-3116 . . . . . . . 2-28 00-899-7050 . . . . . . . 2-163
00-866-8263 . . . . . . . 2-168 00-881-0944 . . . . . . . 2-60 00-889-3118 . . . . . . . 2-28 00-899-7647 . . . . . . . 2-32
00-867-9945 . . . . . . . 2-76 00-881-1234 . . . . . . . 2-118 00-889-3154 . . . . . . . 2-31 00-899-9721 . . . . . . . 2-159
00-868-0384 . . . . . . . 2-134 00-881-2253 . . . . . . . 2-79 00-889-3424 . . . . . . . 2-158 00-900-0982 . . . . . . . 2-170
00-868-4852 . . . . . . . 2-104 00-881-2705 . . . . . . . 2-75 00-889-8677 . . . . . . . 2-135 00-900-1118 . . . . . . . 2-14
00-869-1486 . . . . . . . 2-83 00-881-5026 . . . . . . . 2-136 00-890-1471 . . . . . . . 2-115 00-900-1803 . . . . . . . 2-170
00-869-1498 . . . . . . . 2-83 00-881-7580 . . . . . . . 2-149 00-890-3412 . . . . . . . 2-104 00-900-3249 . . . . . . . 2-25
00-869-4298 . . . . . . . 2-83 00-881-7581 . . . . . . . 2-149 00-890-6291 . . . . . . . 2-169 00-900-3272 . . . . . . . 2-32
00-870-0048 . . . . . . . 2-30 00-881-7582 . . . . . . . 2-149 00-890-7980 . . . . . . . 2-66 00-900-3274 . . . . . . . 2-32
00-871-8758 . . . . . . . 2-64 00-881-7597 . . . . . . . 2-149 00-890-8067 . . . . . . . 2-174 00-900-3276 . . . . . . . 2-33
00-872-7937 . . . . . . . 2-136 00-881-7859 . . . . . . . 2-149 00-891-1759 . . . . . . . 2-118 00-900-5282 . . . . . . . 2-47
00-873-2557 . . . . . . . 2-144 00-881-7862 . . . . . . . 2-149 00-891-1760 . . . . . . . 2-119 00-900-7399 . . . . . . . 2-118
00-873-5012 . . . . . . . 2-58 00-881-7863 . . . . . . . 2-149 00-891-1775 . . . . . . . 2-22 00-900-9012 . . . . . . . 2-32
00-873-5015 . . . . . . . 2-173 00-881-8377 . . . . . . . 2-149 00-891-1778 . . . . . . . 2-22 00-900-9421 . . . . . . . 2-64
00-873-5698 . . . . . . . 2-92 00-881-8380 . . . . . . . 2-149 00-891-1779 . . . . . . . 2-22 00-901-0877 . . . . . . . 2-173
00-874-7171 . . . . . . . 2-162 00-882-1435 . . . . . . . 2-168 00-891-1783 . . . . . . . 2-22 00-901-1330 . . . . . . . 2-77
00-875-8249 . . . . . . . 2-65 00-882-1438 . . . . . . . 2-79 00-891-1784 . . . . . . . 2-22 00-901-2101 . . . . . . . 2-33
00-875-9664 . . . . . . . 2-64 00-882-5030 . . . . . . . 2-94 00-891-3461 . . . . . . . 2-57 00-901-2103 . . . . . . . 2-33
00-877-5324 . . . . . . . 2-171 00-882-5959 . . . . . . . 2-170 00-891-4896 . . . . . . . 2-19 00-901-2106 . . . . . . . 2-33
00-877-5377 . . . . . . . 2-35 00-882-6874 . . . . . . . 2-119 00-891-5546 . . . . . . . 2-76 00-901-2108 . . . . . . . 2-33
00-877-5795 . . . . . . . 2-61 00-882-8045 . . . . . . . 2-119 00-891-6498 . . . . . . . 2-56 00-901-2111 . . . . . . . 2-33
00-877-5796 . . . . . . . 2-61 00-882-8051 . . . . . . . 2-119 00-891-7826 . . . . . . . 2-130 00-901-2113 . . . . . . . 2-33
00-877-5797 . . . . . . . 2-61 00-882-8056 . . . . . . . 2-119 00-891-8883 . . . . . . . 2-22 00-901-2114 . . . . . . . 2-33
00-877-5798 . . . . . . . 2-61 00-882-8058 . . . . . . . 2-119 00-891-8989 . . . . . . . 2-19 00-901-2137 . . . . . . . 2-31
00-877-7437 . . . . . . . 2-11 00-883-0233 . . . . . . . 2-127 00-891-9073 . . . . . . . 2-89 00-901-2612 . . . . . . . 2-33
00-878-1908 . . . . . . . 2-171 00-883-0628 . . . . . . . 2-32 00-892-1608 . . . . . . . 2-126 00-901-2614 . . . . . . . 2-33
00-878-3291 . . . . . . . 2-60 00-883-4609 . . . . . . . 2-154 00-892-1764 . . . . . . . 2-106 00-901-2630 . . . . . . . 2-32
00-878-3292 . . . . . . . 2-60 00-883-5929 . . . . . . . 2-105 00-892-2165 . . . . . . . 2-175 00-901-2631 . . . . . . . 2-32
00-878-4784 . . . . . . . 2-127 00-883-6572 . . . . . . . 2-119 00-892-2166 . . . . . . . 2-175 00-901-3077 . . . . . . . 2-11
00-878-7196 . . . . . . . 2-60 00-883-8220 . . . . . . . 2-105 00-892-4050 . . . . . . . 2-115 00-901-3083 . . . . . . . 2-35
00-878-8214 . . . . . . . 2-161 00-883-9384 . . . . . . . 2-66 00-892-4096 . . . . . . . 2-127 00-901-3117 . . . . . . . 2-33
00-878-9518 . . . . . . . 2-61 00-884-3977 . . . . . . . 2-64 00-892-4189 . . . . . . . 2-174 00-901-3124 . . . . . . . 2-33
00-879-0338 . . . . . . . 2-79 00-889-2128 . . . . . . . 2-127 00-892-4258 . . . . . . . 2-129 00-901-3127 . . . . . . . 2-33
00-879-0545 . . . . . . . 2-24 00-889-2500 . . . . . . . 2-59 00-893-6053 . . . . . . . 2-77 00-901-3128 . . . . . . . 2-33
00-879-3825 . . . . . . . 2-32 00-889-2549 . . . . . . . 2-62 00-893-6619 . . . . . . . 2-46 00-901-3129 . . . . . . . 2-33
00-879-4829 . . . . . . . 2-75 00-889-2589 . . . . . . . 2-61 00-893-6638 . . . . . . . 2-68 00-901-3130 . . . . . . . 2-33
00-879-7941 . . . . . . . 2-32 00-889-2601 . . . . . . . 2-82 00-894-1035 . . . . . . . 2-164 00-901-3131 . . . . . . . 2-33
00-879-9934 . . . . . . . 2-172 00-889-2602 . . . . . . . 2-82 00-894-1954 . . . . . . . 2-125 00-901-3132 . . . . . . . 2-33
00-880-1418 . . . . . . . 2-76 00-889-2603 . . . . . . . 2-82 00-894-3637 . . . . . . . 2-61 00-901-3133 . . . . . . . 2-33
00-880-1425 . . . . . . . 2-23 00-889-2604 . . . . . . . 2-82 00-894-3638 . . . . . . . 2-61 00-901-3136 . . . . . . . 2-33
00-880-2666 . . . . . . . 2-170 00-889-2607 . . . . . . . 2-79 00-894-4489 . . . . . . . 2-162 00-901-3787 . . . . . . . 2-32
00-880-5976 . . . . . . . 2-66 00-889-2678 . . . . . . . 2-86 00-895-1702 . . . . . . . 2-78 00-901-3788 . . . . . . . 2-32
00-880-5977 . . . . . . . 2-67 00-889-2867 . . . . . . . 2-48 00-895-9345 . . . . . . . 2-137 00-901-3790 . . . . . . . 2-32
00-880-5978 . . . . . . . 2-66 00-889-2933 . . . . . . . 2-47 00-896-3671 . . . . . . . 2-75 00-901-3792 . . . . . . . 2-32
00-880-7010 . . . . . . . 2-61 00-889-2991 . . . . . . . 2-26 00-897-6145 . . . . . . . 2-61 00-901-3793 . . . . . . . 2-32
00-880-7744 . . . . . . . 2-56 00-889-2994 . . . . . . . 2-21 00-897-6340 . . . . . . . 2-73 00-901-3794 . . . . . . . 2-32
00-880-7745 . . . . . . . 2-56 00-889-2997 . . . . . . . 2-28 00-898-0146 . . . . . . . 2-167 00-901-3795 . . . . . . . 2-32
00-880-7746 . . . . . . . 2-56 00-889-2998 . . . . . . . 2-28 00-898-9594 . . . . . . . 2-108 00-901-3884 . . . . . . . 2-77
00-880-8186 . . . . . . . 2-56 00-889-2999 . . . . . . . 2-28 00-899-1493 . . . . . . . 2-103 00-901-3888 . . . . . . . 2-77
00-880-8189 . . . . . . . 2-56 00-889-3000 . . . . . . . 2-28 00-899-4116 . . . . . . . 2-75 00-901-4407 . . . . . . . 2-118
00-880-8211 . . . . . . . 2-67 00-889-3001 . . . . . . . 2-28 00-899-4118 . . . . . . . 2-75 00-901-6194 . . . . . . . 2-118
2-216
Page Page Page Page

00-901-7196 . . . . . . . 2-118 00-906-6279 . . . . . . . 2-161 00-917-9763 . . . . . . . 2-144 . . . . . . . 2-22
00-901-9660 . . . . . . . 2-97 00-907-0033 . . . . . . . 2-14 00-918-3116 . . . . . . . 2-73 00-925-9679 . . . . . . . 2-22
00-902-0401 . . . . . . . 2-118 00-908-6541 . . . . . . . 2-167 00-918-4798 . . . . . . . 2-84 00-925-9682 . . . . . . . 2-22
00-902-2124 . . . . . . . 2-21 00-908-6843 . . . . . . . 2-103 00-918-4886 . . . . . . . 2-84 00-925-9768 . . . . . . . 2-77
00-902-2125 . . . . . . . 2-21 00-908-9364 . . . . . . . 2-77 00-918-7054 . . . . . . . 2-77 00-925-9769 . . . . . . . 2-77
00-902-2136 . . . . . . . 2-26 00-909-9659 . . . . . . . 2-97 00-918-8519 . . . . . . . 2-99 00-926-1394 . . . . . . . 2-91
00-902-6676 . . . . . . . 2-61 00-910-5288 . . . . . . . 2-165 00-919-8173 . . . . . . . 2-138 00-926-1835 . . . . . . . 2-61
00-902-6898 . . . . . . . 2-73 00-910-6629 . . . . . . . 2-119 00-919-8177 . . . . . . . 2-159 00-926-1852 . . . . . . . 2-61
00-902-7355 . . . . . . . 2-96 00-911-2443 . . . . . . . 2-142 00-920-0850 . . . . . . . 2-23 00-926-1923 . . . . . . . 2-114
00-902-7831 . . . . . . . 2-20 00-912-2913 . . . . . . . 2-172 00-921-0862 . . . . . . . 2-79 00-926-4075 . . . . . . . 2-119
00-902-7846 . . . . . . . 2-61 00-912-3487 . . . . . . . 2-17 00-921-0918 . . . . . . . 2-22 00-926-5430 . . . . . . . 2-7
00-902-7890 . . . . . . . 2-22 00-912-4819 . . . . . . . 2-23 00-921-0919 . . . . . . . 2-22 00-926-5679 . . . . . . . 2-30
00-902-7950 . . . . . . . 2-108 00-912-4833 . . . . . . . 2-23 00-921-3845 . . . . . . . 2-157 00-926-5680 . . . . . . . 2-42
00-902-8678 . . . . . . . 2-86 00-912-4837 . . . . . . . 2-23 00-921-3848 . . . . . . . 2-96 00-926-5871 . . . . . . . 2-69
00-902-9369 . . . . . . . 2-61 00-912-4838 . . . . . . . 2-23 00-921-5424 . . . . . . . 2-66 00-926-5877 . . . . . . . 2-69
00-903-1524 . . . . . . . 2-57 00-912-4839 . . . . . . . 2-23 00-921-8634 . . . . . . . 2-70 00-926-5879 . . . . . . . 2-69
00-903-3535 . . . . . . . 2-49 00-912-5113 . . . . . . . 2-14 00-922-1793 . . . . . . . 2-66 00-926-5899 . . . . . . . 2-86
00-903-3537 . . . . . . . 2-49 00-912-5230 . . . . . . . 2-45 00-922-1794 . . . . . . . 2-70 00-926-9331 . . . . . . . 2-119
00-903-3538 . . . . . . . 2-49 00-912-7307 . . . . . . . 2-22 00-922-3497 . . . . . . . 2-130 00-927-2972 . . . . . . . 2-165
00-903-3541 . . . . . . . 2-49 00-912-7308 . . . . . . . 2-22 00-922-3517 . . . . . . . 2-84 00-928-2418 . . . . . . . 2-68
00-903-3949 . . . . . . . 2-81 00-912-9189 . . . . . . . 2-45 00-922-6286 . . . . . . . 2-23 00-928-2690 . . . . . . . 2-69
00-903-3992 . . . . . . . 2-57 00-912-9190 . . . . . . . 2-103 00-922-7994 . . . . . . . 2-14 00-928-9325 . . . . . . . 2-153
00-903-5944 . . . . . . . 2-80 00-913-1265 . . . . . . . 2-167 00-922-8777 . . . . . . . 2-23 00-928-9510 . . . . . . . 2-57
00-903-5966 . . . . . . . 2-56 00-913-2420 . . . . . . . 2-62 00-922-8778 . . . . . . . 2-23 00-929-4041 . . . . . . . 2-13
00-903-7123 . . . . . . . 2-165 00-913-6128 . . . . . . . 2-49 00-923-0880 . . . . . . . 2-130 00-929-5118 . . . . . . . 2-185
00-903-7720 . . . . . . . 2-22 00-913-6886 . . . . . . . 2-20 00-923-1326 . . . . . . . 2-170 00-929-6395 . . . . . . . 2-69
00-903-8282 . . . . . . . 2-61 00-913-8708 . . . . . . . 2-41 00-923-5415 . . . . . . . 2-76 00-929-6558 . . . . . . . 2-11
00-903-8778 . . . . . . . 2-84 00-913-8869 . . . . . . . 2-30 00-923-9512 . . . . . . . 2-91 00-929-6847 . . . . . . . 2-79
00-904-0743 . . . . . . . 2-67 00-913-8881 . . . . . . . 2-56 00-924-5850 . . . . . . . 2-173 00-930-3041 . . . . . . . 2-118
00-904-0873 . . . . . . . 2-93 00-913-9758 . . . . . . . 2-78 00-924-5897 . . . . . . . 2-56 00-930-6886 . . . . . . . 2-79
00-904-0902 . . . . . . . 2-21 00-914-0429 . . . . . . . 2-174 00-924-7757 . . . . . . . 2-119 00-930-7013 . . . . . . . 2-66
00-904-1662 . . . . . . . 2-77 00-914-0876 . . . . . . . 2-103 00-924-7760 . . . . . . . 2-119 00-930-7569 . . . . . . . 2-67
00-904-1663 . . . . . . . 2-77 00-914-1118 . . . . . . . 2-115 00-924-8210 . . . . . . . 2-57 00-932-0892 . . . . . . . 2-175
00-904-1673 . . . . . . . 2-77 00-914-3817 . . . . . . . 2-31 00-924-8233 . . . . . . . 2-93 00-932-1921 . . . . . . . 2-22
00-904-2344 . . . . . . . 2-62 00-914-3818 . . . . . . . 2-31 00-924-9507 . . . . . . . 2-31 00-932-3280 . . . . . . . 2-14
00-904-3748 . . . . . . . 2-13 00-914-4093 . . . . . . . 2-104 00-924-9508 . . . . . . . 2-22 00-932-5694 . . . . . . . 2-21
00-904-4129 . . . . . . . 2-127 00-914-4171 . . . . . . . 2-31 00-925-4774 . . . . . . . 2-23 00-932-5717 . . . . . . . 2-84
00-904-4136 . . . . . . . 2-84 00-914-5748 . . . . . . . 2-135 00-925-4777 . . . . . . . 2-23 00-932-9927 . . . . . . . 2-79
00-904-4786 . . . . . . . 2-77 00-914-6130 . . . . . . . 2-14 00-925-4780 . . . . . . . 2-23 00-933-0753 . . . . . . . 2-160
00-904-6346 . . . . . . . 2-102 00-914-8824 . . . . . . . 2-19 00-925-4836 . . . . . . . 2-22 00-933-0955 . . . . . . . 2-173
00-904-6861 . . . . . . . 2-77 00-914-9000 . . . . . . . 2-22 00-925-7635 . . . . . . . 2-14 00-933-8118 . . . . . . . 2-69
00-905-0698 . . . . . . . 2-40 00-914-9315 . . . . . . . 2-134 00-925-7856 . . . . . . . 2-22 00-933-8119 . . . . . . . 2-69
00-905-1691 . . . . . . . 2-57 00-915-1212 . . . . . . . 2-60 00-925-7857 . . . . . . . 2-22 00-933-8120 . . . . . . . 2-69
00-905-2448 . . . . . . . 2-174 00-915-3630 . . . . . . . 2-118 00-925-7858 . . . . . . . 2-23 00-933-8121 . . . . . . . 2-69
00-905-2700 . . . . . . . 2-14 00-915-4659 . . . . . . . 2-41 00-925-7862 . . . . . . . 2-22 00-933-8778 . . . . . . . 2-69
00-905-2712 . . . . . . . 2-14 00-915-4891 . . . . . . . 2-56 00-925-7863 . . . . . . . 2-22 00-934-0000 . . . . . . . 2-37
00-905-2891 . . . . . . . 2-22 00-915-8087 . . . . . . . 2-15 00-925-7864 . . . . . . . 2-22 00-934-0012 . . . . . . . 2-60
00-905-3081 . . . . . . . 2-61 00-916-9214 . . . . . . . 2-67 00-925-8249 . . . . . . . 2-153 00-934-0231 . . . . . . . 2-81
00-905-3653 . . . . . . . 2-119 00-917-2614 . . . . . . . 2-48 00-925-9642 . . . . . . . 2-61 00-934-0262 . . . . . . . 2-14
00-905-7292 . . . . . . . 2-58 00-917-4713 . . . . . . . 2-56 00-925-9645 . . . . . . . 2-61 00-934-0285 . . . . . . . 2-80
00-905-8451 . . . . . . . 2-61 00-917-4729 . . . . . . . 2-30 00-925-9646 . . . . . . . 2-61 00-934-9724 . . . . . . . 2-57
00-905-9544 . . . . . . . 2-104 00-917-6279 . . . . . . . 2-18 00-925-9674 . . . . . . . 2-22 00-934-9727 . . . . . . . 2-57
00-906-6261 . . . . . . . 2-162 00-917-7957 . . . . . . . 2-154 00-925-9675 . . . . . . . 2-22 00-934-9738 . . . . . . . 2-57
2-217
Page Page Page Page

00-934-9739 . . . . . . . 2-57 00-939-9179 . . . . . . . 2-23 00-944-8271 . . . . . . . 2-22 00-950-9766 . . . . . . . 2-151
00-934-9746 . . . . . . . 2-57 00-939-9188 . . . . . . . 2-23 00-944-9577 . . . . . . . 2-128 00-951-2234 . . . . . . . 2-74
00-934-9747 . . . . . . . 2-57 00-939-9189 . . . . . . . 2-23 00-945-0505 . . . . . . . 2-23 00-951-2395 . . . . . . . 2-80
00-934-9748 . . . . . . . 2-57 00-939-9191 . . . . . . . 2-23 00-945-0506 . . . . . . . 2-23 00-951-2620 . . . . . . . 2-13
00-934-9751 . . . . . . . 2-57 00-939-9204 . . . . . . . 2-13 00-945-0528 . . . . . . . 2-67 00-951-4679 . . . . . . . 2-66
00-934-9757 . . . . . . . 2-57 00-939-9206 . . . . . . . 2-13 00-945-0539 . . . . . . . 2-22 00-951-5617 . . . . . . . 2-32
00-934-9758 . . . . . . . 2-57 00-939-9208 . . . . . . . 2-23 00-945-0546 . . . . . . . 2-77 00-951-5699 . . . . . . . 2-49
00-934-9759 . . . . . . . 2-57 00-939-9209 . . . . . . . 2-23 00-945-0548 . . . . . . . 2-77 00-951-6908 . . . . . . . 2-77
00-934-9760 . . . . . . . 2-57 00-939-9221 . . . . . . . 2-23 00-945-0549 . . . . . . . 2-77 00-951-7209 . . . . . . . 2-66
00-934-9761 . . . . . . . 2-57 00-939-9222 . . . . . . . 2-23 00-945-2577 . . . . . . . 2-94 00-952-0309 . . . . . . . 2-67
00-934-9762 . . . . . . . 2-57 00-939-9230 . . . . . . . 2-23 00-945-4414 . . . . . . . 2-174 00-952-0438 . . . . . . . 2-77
00-934-9764 . . . . . . . 2-57 00-939-9232 . . . . . . . 2-23 00-945-4415 . . . . . . . 2-107 00-952-0760 . . . . . . . 2-29
00-934-9765 . . . . . . . 2-57 00-939-9257 . . . . . . . 2-20 00-945-4419 . . . . . . . 2-144 00-952-1432 . . . . . . . 2-15
00-934-9766 . . . . . . . 2-57 00-939-9258 . . . . . . . 2-23 00-945-4429 . . . . . . . 2-66 00-952-5350 . . . . . . . 2-174
00-934-9794 . . . . . . . 2-118 00-939-9738 . . . . . . . 2-41 00-945-4534 . . . . . . . 2-156 00-952-6628 . . . . . . . 2-103
00-935-3025 . . . . . . . 2-22 00-940-8068 . . . . . . . 2-14 00-945-4694 . . . . . . . 2-84 00-952-6629 . . . . . . . 2-103
00-935-3062 . . . . . . . 2-41 00-940-8667 . . . . . . . 2-78 00-945-4746 . . . . . . . 2-84 00-952-6630 . . . . . . . 2-103
00-935-3886 . . . . . . . 2-134 00-940-9028 . . . . . . . 2-46 00-945-6427 . . . . . . . 2-96 00-952-6860 . . . . . . . 2-103
00-935-5603 . . . . . . . 2-174 00-940-9487 . . . . . . . 2-23 00-946-2830 . . . . . . . 2-68 00-952-6861 . . . . . . . 2-103
00-935-7698 . . . . . . . 2-151 00-940-9488 . . . . . . . 2-23 00-946-4683 . . . . . . . 2-163 00-952-6862 . . . . . . . 2-103
00-935-7869 . . . . . . . 2-150 00-940-9489 . . . . . . . 2-23 00-946-7877 . . . . . . . 2-22 00-952-9810 . . . . . . . 2-80
00-935-9260 . . . . . . . 2-119 00-940-9491 . . . . . . . 2-23 00-946-8273 . . . . . . . 2-31 00-953-0262 . . . . . . . 2-39
00-935-9268 . . . . . . . 2-126 00-941-0121 . . . . . . . 2-45 00-947-0159 . . . . . . . 2-170 00-954-0942 . . . . . . . 2-28
00-936-0022 . . . . . . . 2-46 00-941-3551 . . . . . . . 2-23 00-947-1380 . . . . . . . 2-61 00-954-3487 . . . . . . . 2-25
00-936-3007 . . . . . . . 2-22 00-941-5767 . . . . . . . 2-118 00-947-2169 . . . . . . . 2-23 00-954-3938 . . . . . . . 2-28
00-936-5989 . . . . . . . 2-162 00-941-6019 . . . . . . . 2-61 00-947-2309 . . . . . . . 2-14 00-954-4295 . . . . . . . 2-25
00-936-5995 . . . . . . . 2-36 00-941-6403 . . . . . . . 2-23 00-947-4228 . . . . . . . 2-41 00-954-5207 . . . . . . . 2-32
00-937-0453 . . . . . . . 2-69 00-941-7908 . . . . . . . 2-84 00-947-4306 . . . . . . . 2-46 00-954-5629 . . . . . . . 2-24
00-937-0454 . . . . . . . 2-69 00-941-9437 . . . . . . . 2-23 00-947-4353 . . . . . . . 2-14 00-954-5636 . . . . . . . 2-24
00-937-1348 . . . . . . . 2-136 00-941-9444 . . . . . . . 2-118 00-947-4354 . . . . . . . 2-14 00-954-5637 . . . . . . . 2-24
00-937-5448 . . . . . . . 2-85 00-942-2167 . . . . . . . 2-23 00-947-4362 . . . . . . . 2-14 00-954-5641 . . . . . . . 2-27
00-938-1732 . . . . . . . 2-174 00-942-2168 . . . . . . . 2-23 00-947-4440 . . . . . . . 2-89 00-954-5643 . . . . . . . 2-27
00-938-2013 . . . . . . . 2-57 00-942-2195 . . . . . . . 2-26 00-947-4605 . . . . . . . 2-80 00-954-8153 . . . . . . . 2-27
00-938-6624 . . . . . . . 2-47 00-942-2196 . . . . . . . 2-14 00-947-7023 . . . . . . . 2-47 00-954-8154 . . . . . . . 2-27
00-938-6713 . . . . . . . 2-84 . . . . . . . 2-15 00-947-7052 . . . . . . . 2-12 00-954-8155 . . . . . . . 2-27
00-938-8386 . . . . . . . 2-65 00-942-2571 . . . . . . . 2-173 00-948-0091 . . . . . . . 2-134 00-954-8795 . . . . . . . 2-96
00-938-8387 . . . . . . . 2-65 00-942-5120 . . . . . . . 2-118 00-948-0092 . . . . . . . 2-174 00-954-8942 . . . . . . . 2-15
00-938-9074 . . . . . . . 2-77 00-942-5139 . . . . . . . 2-64 00-948-0667 . . . . . . . 2-12 00-954-8981 . . . . . . . 2-27
00-938-9841 . . . . . . . 2-168 00-942-5223 . . . . . . . 2-98 00-948-0803 . . . . . . . 2-14 00-954-8985 . . . . . . . 2-27
00-939-0661 . . . . . . . 2-31 00-942-5371 . . . . . . . 2-171 00-948-3996 . . . . . . . 2-79 00-954-8987 . . . . . . . 2-27
00-939-0779 . . . . . . . 2-94 00-942-8431 . . . . . . . 2-23 00-948-4038 . . . . . . . 2-23 00-954-8991 . . . . . . . 2-27
00-939-0783 . . . . . . . 2-61 00-943-0898 . . . . . . . 2-22 00-948-4151 . . . . . . . 2-22 00-954-8994 . . . . . . . 2-27
00-939-0800 . . . . . . . 2-12 00-943-2054 . . . . . . . 2-77 00-948-4152 . . . . . . . 2-22 00-954-8996 . . . . . . . 2-27
00-939-0849 . . . . . . . 2-61 00-943-5308 . . . . . . . 2-57 00-948-5034 . . . . . . . 2-163 00-954-8997 . . . . . . . 2-27
00-939-0850 . . . . . . . 2-61 00-943-5493 . . . . . . . 2-96 00-948-9708 . . . . . . . 2-69 00-954-8998 . . . . . . . 2-27
00-939-1192 . . . . . . . 2-144 00-943-5918 . . . . . . . 2-23 00-948-9811 . . . . . . . 2-31 00-954-9000 . . . . . . . 2-27
00-939-7063 . . . . . . . 2-13 00-943-6646 . . . . . . . 2-47 00-949-3769 . . . . . . . 2-47 00-954-9525 . . . . . . . 2-27
00-939-9095 . . . . . . . 2-118 00-943-8149 . . . . . . . 2-171 00-949-6143 . . . . . . . 2-58 00-954-9527 . . . . . . . 2-27
00-939-9097 . . . . . . . 2-119 00-943-8154 . . . . . . . 2-163 00-950-0039 . . . . . . . 2-61 00-954-9529 . . . . . . . 2-27
00-939-9132 . . . . . . . 2-24 00-943-9897 . . . . . . . 2-61 00-950-1303 . . . . . . . 2-127 00-954-9537 . . . . . . . 2-27
00-939-9146 . . . . . . . 2-24 00-944-5929 . . . . . . . 2-22 00-950-1310 . . . . . . . 2-66 00-954-9539 . . . . . . . 2-27
00-939-9148 . . . . . . . 2-24 00-944-5940 . . . . . . . 2-108 00-950-1403 . . . . . . . 2-66 00-954-9548 . . . . . . . 2-27
00-939-9151 . . . . . . . 2-24 00-944-7490 . . . . . . . 2-80 00-950-8468 . . . . . . . 2-60 00-955-0877 . . . . . . . 2-79
2-218
Page Page Page Page

00-955-6655 . . . . . . . 2-65 00-958-5477 . . . . . . . 2-25 00-961-8394 . . . . . . . 2-64 00-970-0059 . . . . . . . 2-106
00-955-8237 . . . . . . . 2-47 00-958-5481 . . . . . . . 2-25 00-961-8395 . . . . . . . 2-64 00-970-4847 . . . . . . . 2-81
00-956-4549 . . . . . . . 2-61 00-958-6194 . . . . . . . 2-85 00-961-8396 . . . . . . . 2-64 00-971-7659 . . . . . . . 2-42
00-956-5633 . . . . . . . 2-76 00-958-6230 . . . . . . . 2-25 00-961-9801 . . . . . . . 2-130 00-971-8827 . . . . . . . 2-8
00-956-5741 . . . . . . . 2-90 00-958-6373 . . . . . . . 2-25 00-962-2728 . . . . . . . 2-163 00-972-5779 . . . . . . . 2-66
00-956-7355 . . . . . . . 2-84 00-958-6381 . . . . . . . 2-28 00-962-4693 . . . . . . . 2-85 00-972-8377 . . . . . . . 2-92
00-956-8465 . . . . . . . 2-104 00-958-6485 . . . . . . . 2-102 00-963-6886 . . . . . . . 2-130 00-972-8378 . . . . . . . 2-92
00-957-0756 . . . . . . . 2-80 00-958-6517 . . . . . . . 2-15 00-964-0503 . . . . . . . 2-14 00-972-8816 . . . . . . . 2-164
00-957-0834 . . . . . . . 2-144 00-958-7483 . . . . . . . 2-16 00-964-0508 . . . . . . . 2-14 00-972-9894 . . . . . . . 2-162
00-957-1120 . . . . . . . 2-127 00-958-7667 . . . . . . . 2-15 00-964-0557 . . . . . . . 2-14 00-973-0929 . . . . . . . 2-19
00-957-2383 . . . . . . . 2-25 00-958-8383 . . . . . . . 2-85 00-964-0589 . . . . . . . 2-13 00-973-3697 . . . . . . . 2-59
00-957-2394 . . . . . . . 2-16 00-958-8527 . . . . . . . 2-110 00-964-0872 . . . . . . . 2-30 00-973-8786 . . . . . . . 2-69
00-957-2399 . . . . . . . 2-80 00-958-8611 . . . . . . . 2-47 00-964-1206 . . . . . . . 2-77 00-974-6623 . . . . . . . 2-69
00-957-2639 . . . . . . . 2-25 00-958-9318 . . . . . . . 2-47 00-964-2555 . . . . . . . 2-136 00-974-6632 . . . . . . . 2-163
00-957-5897 . . . . . . . 2-15 00-958-9398 . . . . . . . 2-70 00-964-2557 . . . . . . . 2-136 00-975-1574 . . . . . . . 2-58
00-957-6265 . . . . . . . 2-25 00-958-9986 . . . . . . . 2-156 00-964-2844 . . . . . . . 2-21 00-975-1618 . . . . . . . 2-60
00-957-6269 . . . . . . . 2-25 00-959-0145 . . . . . . . 2-83 00-964-2845 . . . . . . . 2-21 00-975-1959 . . . . . . . 2-76
00-957-6272 . . . . . . . 2-25 00-959-0148 . . . . . . . 2-83 00-964-3125 . . . . . . . 2-47 00-975-2037 . . . . . . . 2-118
00-957-6637 . . . . . . . 2-95 00-959-0150 . . . . . . . 2-83 00-964-3664 . . . . . . . 2-136 00-975-2075 . . . . . . . 2-57
00-957-7056 . . . . . . . 2-80 00-959-0158 . . . . . . . 2-83 00-964-6195 . . . . . . . 2-24 00-975-2126 . . . . . . . 2-136
00-957-7086 . . . . . . . 2-25 00-959-0172 . . . . . . . 2-83 00-964-6196 . . . . . . . 2-24 00-975-7207 . . . . . . . 2-104
00-957-7446 . . . . . . . 2-16 00-959-0296 . . . . . . . 2-104 00-964-6781 . . . . . . . 2-60 00-975-7630 . . . . . . . 2-40
00-957-7810 . . . . . . . 2-25 00-959-0297 . . . . . . . 2-110 00-965-0659 . . . . . . . 2-112 00-976-5268 . . . . . . . 2-97
00-957-7811 . . . . . . . 2-25 00-959-0334 . . . . . . . 2-83 00-965-0719 . . . . . . . 2-118 00-978-9342 . . . . . . . 2-16
00-957-7813 . . . . . . . 2-25 00-959-0336 . . . . . . . 2-83 00-965-0749 . . . . . . . 2-118 00-978-9344 . . . . . . . 2-16
00-957-7814 . . . . . . . 2-25 00-959-0338 . . . . . . . 2-83 00-965-0750 . . . . . . . 2-118 00-978-9345 . . . . . . . 2-20
00-957-7815 . . . . . . . 2-25 00-959-0345 . . . . . . . 2-83 00-965-1158 . . . . . . . 2-167 00-978-9346 . . . . . . . 2-16
00-957-7817 . . . . . . . 2-25 00-959-0350 . . . . . . . 2-83 00-965-1800 . . . . . . . 2-56 00-978-9347 . . . . . . . 2-16
00-957-7818 . . . . . . . 2-25 00-959-0379 . . . . . . . 2-15 00-965-1806 . . . . . . . 2-66 00-978-9349 . . . . . . . 2-16
00-957-7820 . . . . . . . 2-25 00-959-0382 . . . . . . . 2-15 00-965-1823 . . . . . . . 2-75 00-978-9350 . . . . . . . 2-16
00-957-7853 . . . . . . . 2-42 00-959-0461 . . . . . . . 2-83 00-965-4891 . . . . . . . 2-156 00-978-9352 . . . . . . . 2-16
00-957-9385 . . . . . . . 2-80 00-959-0463 . . . . . . . 2-83 00-965-5879 . . . . . . . 2-25 00-978-9354 . . . . . . . 2-16
00-957-9395 . . . . . . . 2-80 00-959-0982 . . . . . . . 2-119 00-965-5882 . . . . . . . 2-25 00-978-9355 . . . . . . . 2-16
00-958-0245 . . . . . . . 2-115 00-959-1082 . . . . . . . 2-20 00-965-6702 . . . . . . . 2-76 00-978-9358 . . . . . . . 2-16
00-958-0585 . . . . . . . 2-29 00-959-1488 . . . . . . . 2-61 00-965-9504 . . . . . . . 2-85 00-978-9365 . . . . . . . 2-16
00-958-0586 . . . . . . . 2-29 00-959-1536 . . . . . . . 2-33 00-966-0502 . . . . . . . 2-104 00-978-9369 . . . . . . . 2-16
00-958-0610 . . . . . . . 2-29 00-959-1909 . . . . . . . 2-15 00-966-2427 . . . . . . . 2-41 00-978-9370 . . . . . . . 2-16
00-958-0671 . . . . . . . 2-29 00-959-2242 . . . . . . . 2-17 00-966-9587 . . . . . . . 2-144 00-978-9371 . . . . . . . 2-16
00-958-0672 . . . . . . . 2-29 00-959-2345 . . . . . . . 2-25 00-967-3449 . . . . . . . 2-73 00-978-9372 . . . . . . . 2-16
00-958-1002 . . . . . . . 2-24 00-959-2690 . . . . . . . 2-25 . . . . . . . 2-74 00-978-9373 . . . . . . . 2-16
00-958-1073 . . . . . . . 2-171 00-959-2723 . . . . . . . 2-25 00-967-4748 . . . . . . . 2-55 00-978-9374 . . . . . . . 2-16
00-958-1075 . . . . . . . 2-171 00-959-2724 . . . . . . . 2-25 00-967-5089 . . . . . . . 2-152 00-978-9376 . . . . . . . 2-16
00-958-3409 . . . . . . . 2-21 00-959-3161 . . . . . . . 2-154 00-967-5092 . . . . . . . 2-152 00-978-9378 . . . . . . . 2-16
00-958-4351 . . . . . . . 2-28 00-959-4157 . . . . . . . 2-25 00-967-5093 . . . . . . . 2-152 00-978-9379 . . . . . . . 2-16
00-958-5245 . . . . . . . 2-25 00-959-4158 . . . . . . . 2-26 00-968-1864 . . . . . . . 2-118 00-978-9380 . . . . . . . 2-16
00-958-5246 . . . . . . . 2-25 00-959-4718 . . . . . . . 2-101 00-969-2851 . . . . . . . 2-79 00-978-9381 . . . . . . . 2-16
00-958-5247 . . . . . . . 2-25 00-959-7205 . . . . . . . 2-83 00-969-3142 . . . . . . . 2-13 00-978-9382 . . . . . . . 2-16
00-958-5248 . . . . . . . 2-25 00-959-7214 . . . . . . . 2-83 00-969-4502 . . . . . . . 2-97 00-978-9385 . . . . . . . 2-16
00-958-5260 . . . . . . . 2-25 00-960-2410 . . . . . . . 2-91 00-969-5466 . . . . . . . 2-30 00-978-9391 . . . . . . . 2-16
00-958-5453 . . . . . . . 2-25 00-961-8390 . . . . . . . 2-64 00-969-6487 . . . . . . . 2-24 00-978-9392 . . . . . . . 2-16
00-958-5460 . . . . . . . 2-25 00-961-8391 . . . . . . . 2-64 00-969-6502 . . . . . . . 2-136 00-978-9393 . . . . . . . 2-16
00-958-5471 . . . . . . . 2-25 00-961-8392 . . . . . . . 2-64 00-969-6503 . . . . . . . 2-16 00-978-9394 . . . . . . . 2-16
00-958-5473 . . . . . . . 2-25 00-961-8393 . . . . . . . 2-64 00-969-9225 . . . . . . . 2-49 00-978-9395 . . . . . . . 2-16
2-219
Page Page Page Page

00-978-9396 . . . . . . . 2-16 00-983-6660 ....... 2-16 00-984-6194 . . . . . . . 2-28 00-988-7608 . . . . . . . 2-15
00-978-9397 . . . . . . . 2-16 00-983-6661 ....... 2-16 00-984-6195 . . . . . . . 2-28 00-988-7609 . . . . . . . 2-15
00-979-1594 . . . . . . . 2-107 00-983-6662 ....... 2-16 00-984-6196 . . . . . . . 2-28 00-988-7610 . . . . . . . 2-15
00-979-3518 . . . . . . . 2-134 00-983-6663 ....... 2-16 00-984-6197 . . . . . . . 2-28 00-988-7612 . . . . . . . 2-15
00-980-1542 . . . . . . . 2-49 00-983-6670 ....... 2-16 00-984-6198 . . . . . . . 2-28 00-988-7613 . . . . . . . 2-15
00-980-3094 . . . . . . . 2-77 00-983-6671 ....... 2-16 00-984-6199 . . . . . . . 2-28 00-988-7614 . . . . . . . 2-15
00-980-3507 . . . . . . . 2-174 00-983-6730 ....... 2-28 00-984-6200 . . . . . . . 2-28 00-988-7615 . . . . . . . 2-15
00-980-3825 . . . . . . . 2-173 00-983-7424 ....... 2-16 00-984-6201 . . . . . . . 2-28 00-988-7616 . . . . . . . 2-15
00-980-5094 . . . . . . . 2-103 00-983-7429 ....... 2-16 00-984-6203 . . . . . . . 2-28 00-988-7834 . . . . . . . 2-15
00-980-5642 . . . . . . . 2-90 00-983-7438 ....... 2-16 00-984-6205 . . . . . . . 2-28 00-988-7835 . . . . . . . 2-15
00-981-3512 . . . . . . . 2-15 00-983-7448 ....... 2-16 00-984-6207 . . . . . . . 2-29 00-988-7836 . . . . . . . 2-15
00-981-3733 . . . . . . . 2-118 00-983-7449 ....... 2-16 00-984-6208 . . . . . . . 2-29 00-988-7838 . . . . . . . 2-15
00-981-3736 . . . . . . . 2-118 00-983-7456 ....... 2-16 00-984-6210 . . . . . . . 2-29 00-988-7840 . . . . . . . 2-15
00-981-3884 . . . . . . . 2-64 00-983-7460 ....... 2-16 00-984-6211 . . . . . . . 2-29 00-988-7841 . . . . . . . 2-15
00-981-9100 . . . . . . . 2-134 00-983-7461 ....... 2-40 00-984-6212 . . . . . . . 2-29 00-988-7844 . . . . . . . 2-15
00-982-2559 . . . . . . . 2-168 00-983-7462 ....... 2-16 00-984-6213 . . . . . . . 2-29 00-988-7845 . . . . . . . 2-15
00-982-2618 . . . . . . . 2-22 00-983-7463 ....... 2-16 00-984-6214 . . . . . . . 2-29 00-988-7848 . . . . . . . 2-15
00-982-2638 . . . . . . . 2-76 00-983-7467 ....... 2-16 00-984-6216 . . . . . . . 2-29 00-988-7982 . . . . . . . 2-169
00-982-4906 . . . . . . . 2-62 00-983-7477 ....... 2-16 00-984-6218 . . . . . . . 2-29 00-988-9150 . . . . . . . 2-84
00-982-4908 . . . . . . . 2-62 00-983-7478 ....... 2-40 00-984-6221 . . . . . . . 2-28 00-989-0640 . . . . . . . 2-65
00-982-4912 . . . . . . . 2-62 00-983-7479 ....... 2-16 00-984-6222 . . . . . . . 2-28 00-989-0682 . . . . . . . 2-28
00-982-4971 . . . . . . . 2-62 00-983-8074 ....... 2-16 00-984-6223 . . . . . . . 2-28 00-989-0908 . . . . . . . 2-57
00-982-4973 . . . . . . . 2-61 00-983-8075 ....... 2-16 00-984-6224 . . . . . . . 2-28 00-989-2343 . . . . . . . 2-74
00-982-4975 . . . . . . . 2-62 00-983-8081 ....... 2-16 00-984-6225 . . . . . . . 2-28 00-989-2776 . . . . . . . 2-79
00-982-4999 . . . . . . . 2-61 00-983-8083 ....... 2-16 00-984-6829 . . . . . . . 2-78 00-989-2787 . . . . . . . 2-80
00-982-5000 . . . . . . . 2-62 00-983-8084 ....... 2-16 00-984-7042 . . . . . . . 2-69 00-989-3119 . . . . . . . 2-15
00-982-5003 . . . . . . . 2-62 00-983-9653 ....... 2-15 00-984-7342 . . . . . . . 2-20 00-989-3295 . . . . . . . 2-106
00-982-5009 . . . . . . . 2-62 00-984-0234 ....... 2-16 00-984-7343 . . . . . . . 2-25 00-989-4269 . . . . . . . 2-155
00-982-6562 . . . . . . . 2-66 00-984-0388 ....... 2-70 00-985-0650 . . . . . . . 2-31 00-989-4864 . . . . . . . 2-28
00-982-6809 . . . . . . . 2-61 00-984-2494 ....... 2-66 00-985-6610 . . . . . . . 2-10 00-989-5002 . . . . . . . 2-21
00-982-6810 . . . . . . . 2-61 00-984-2774 ....... 2-77 00-985-6735 . . . . . . . 2-135 00-989-5945 . . . . . . . 2-57
00-982-6813 . . . . . . . 2-61 00-984-3806 ....... 2-61 00-985-6736 . . . . . . . 2-135 00-989-5953 . . . . . . . 2-57
00-982-6814 . . . . . . . 2-61 00-984-4976 ....... 2-28 00-985-6888 . . . . . . . 2-154 00-989-5956 . . . . . . . 2-57
00-982-6827 . . . . . . . 2-59 00-984-4977 ....... 2-28 00-986-2929 . . . . . . . 2-141 00-989-6002 . . . . . . . 2-119
00-982-9529 . . . . . . . 2-67 00-984-4978 ....... 2-28 00-986-6904 . . . . . . . 2-85 00-989-6265 . . . . . . . 2-29
00-983-5334 . . . . . . . 2-16 00-984-4979 ....... 2-28 00-986-7304 . . . . . . . 2-160 00-989-6913 . . . . . . . 2-114
00-983-5335 . . . . . . . 2-16 00-984-4982 ....... 2-28 00-987-1076 . . . . . . . 2-84 00-989-6914 . . . . . . . 2-114
00-983-5336 . . . . . . . 2-16 00-984-4983 ....... 2-28 00-988-0388 . . . . . . . 2-137 00-989-7434 . . . . . . . 2-29
00-983-5338 . . . . . . . 2-16 00-984-4984 ....... 2-28 00-988-1167 . . . . . . . 2-28 00-989-7435 . . . . . . . 2-29
00-983-6621 . . . . . . . 2-16 00-984-4988 ....... 2-28 00-988-1170 . . . . . . . 2-29 00-990-0668 . . . . . . . 2-15
00-983-6622 . . . . . . . 2-16 00-984-4989 ....... 2-28 00-988-1171 . . . . . . . 2-29 00-990-1338 . . . . . . . 2-80
00-983-6623 . . . . . . . 2-16 00-984-4992 ....... 2-28 00-988-1723 . . . . . . . 2-29 00-990-1701 . . . . . . . 2-175
00-983-6625 . . . . . . . 2-16 00-984-4993 ....... 2-28 00-988-1724 . . . . . . . 2-29 00-990-3173 . . . . . . . 2-154
00-983-6647 . . . . . . . 2-15 00-984-5674 ....... 2-29 00-988-1727 . . . . . . . 2-29 00-990-3186 . . . . . . . 2-167
00-983-6650 . . . . . . . 2-16 00-984-5676 ....... 2-29 00-988-1728 . . . . . . . 2-29 00-990-3327 . . . . . . . 2-4
00-983-6651 . . . . . . . 2-16 00-984-5678 ....... 2-29 00-988-1730 . . . . . . . 2-29 00-990-4129 . . . . . . . 2-118
00-983-6652 . . . . . . . 2-16 00-984-5686 ....... 2-29 00-988-3210 . . . . . . . 2-136 00-990-4149 . . . . . . . 2-118
00-983-6653 . . . . . . . 2-16 00-984-5691 ....... 2-29 00-988-5308 . . . . . . . 2-15 00-990-5330 . . . . . . . 2-95
00-983-6654 . . . . . . . 2-16 00-984-5693 ....... 2-29 00-988-7601 . . . . . . . 2-15 00-990-6381 . . . . . . . 2-15
00-983-6655 . . . . . . . 2-16 00-984-6189 ....... 2-28 00-988-7602 . . . . . . . 2-15 00-990-6431 . . . . . . . 2-16
00-983-6656 . . . . . . . 2-16 00-984-6191 ....... 2-28 00-988-7603 . . . . . . . 2-15 00-990-6444 . . . . . . . 2-29
00-983-6658 . . . . . . . 2-16 00-984-6192 ....... 2-28 00-988-7604 . . . . . . . 2-15 00-990-6916 . . . . . . . 2-47
00-983-6659 . . . . . . . 2-16 00-984-6193 ....... 2-28 00-988-7607 . . . . . . . 2-15 00-990-6917 . . . . . . . 2-48
2-220
Page Page Page Page

00-990-7157 . . . . . . . 2-141 00-998-8382 . . . . . . . 2-60 01-005-0786 . . . . . . . 2-175 01-005-4062 . . . . . . . 2-121
00-990-7158 . . . . . . . 2-141 00-999-2188 . . . . . . . 2-85 01-005-2305 . . . . . . . 2-122 01-005-4064 . . . . . . . 2-125
00-990-7749 . . . . . . . 2-118 00-999-9407 . . . . . . . 2-83 01-005-2307 . . . . . . . 2-122 01-005-4408 . . . . . . . 2-122
00-990-7830 . . . . . . . 2-48 01-003-0191 . . . . . . . 2-45 01-005-2308 . . . . . . . 2-122 01-005-4409 . . . . . . . 2-121
00-991-6416 . . . . . . . 2-49 01-003-5984 . . . . . . . 2-108 01-005-2309 . . . . . . . 2-122 01-006-0302 . . . . . . . 2-121
00-991-7193 . . . . . . . 2-67 01-003-7690 . . . . . . . 2-129 01-005-2310 . . . . . . . 2-122 01-006-0303 . . . . . . . 2-121
00-992-0700 . . . . . . . 2-81 01-004-4137 . . . . . . . 2-84 01-005-2311 . . . . . . . 2-122 01-006-0304 . . . . . . . 2-121
00-993-0190 . . . . . . . 2-28 01-004-4872 . . . . . . . 2-104 01-005-2312 . . . . . . . 2-122 01-006-0305 . . . . . . . 2-121
00-993-0191 . . . . . . . 2-28 01-004-4906 . . . . . . . 2-106 01-005-2313 . . . . . . . 2-122 01-006-0306 . . . . . . . 2-121
00-993-1063 . . . . . . . 2-17 01-004-4983 . . . . . . . 2-26 01-005-2314 . . . . . . . 2-122 01-006-0307 . . . . . . . 2-121
00-993-1848 . . . . . . . 2-29 01-004-5031 . . . . . . . 2-130 01-005-2315 . . . . . . . 2-122 01-006-0308 . . . . . . . 2-121
00-993-1849 . . . . . . . 2-29 01-004-5180 . . . . . . . 2-143 01-005-3118 . . . . . . . 2-138 01-006-0309 . . . . . . . 2-122
00-993-1851 . . . . . . . 2-29 01-004-6639 . . . . . . . 2-118 01-005-3200 . . . . . . . 2-121 01-006-0310 . . . . . . . 2-122
00-993-2461 . . . . . . . 2-29 01-004-6882 . . . . . . . 2-41 01-005-3201 . . . . . . . 2-121 01-006-0311 . . . . . . . 2-122
00-993-2463 . . . . . . . 2-29 01-004-6946 . . . . . . . 2-61 01-005-3202 . . . . . . . 2-121 01-006-0312 . . . . . . . 2-122
00-993-2714 . . . . . . . 2-49 01-004-9551 . . . . . . . 2-122 01-005-3204 . . . . . . . 2-122 01-006-0313 . . . . . . . 2-122
00-993-2738 . . . . . . . 2-29 01-004-9552 . . . . . . . 2-121 01-005-3205 . . . . . . . 2-122 01-006-0315 . . . . . . . 2-122
00-993-4125 . . . . . . . 2-78 01-004-9558 . . . . . . . 2-110 01-005-3206 . . . . . . . 2-122 01-006-0316 . . . . . . . 2-122
00-993-5826 . . . . . . . 2-22 01-005-0502 . . . . . . . 2-120 01-005-3207 . . . . . . . 2-122 01-006-0317 . . . . . . . 2-122
00-993-6257 . . . . . . . 2-49 01-005-0505 . . . . . . . 2-120 01-005-3208 . . . . . . . 2-122 01-006-0318 . . . . . . . 2-122
00-993-7363 . . . . . . . 2-84 01-005-0506 . . . . . . . 2-120 01-005-3209 . . . . . . . 2-122 01-006-0319 . . . . . . . 2-122
00-993-8035 . . . . . . . 2-41 01-005-0507 . . . . . . . 2-120 01-005-3211 . . . . . . . 2-122 01-006-0320 . . . . . . . 2-122
00-993-9189 . . . . . . . 2-26 01-005-0508 . . . . . . . 2-120 01-005-3212 . . . . . . . 2-121 01-006-0321 . . . . . . . 2-122
00-994-1630 . . . . . . . 2-167 01-005-0509 . . . . . . . 2-120 01-005-3213 . . . . . . . 2-121 01-006-0322 . . . . . . . 2-122
00-994-3435 . . . . . . . 2-156 01-005-0511 . . . . . . . 2-121 01-005-3214 . . . . . . . 2-122 01-006-0323 . . . . . . . 2-122
00-994-9648 . . . . . . . 2-80 01-005-0512 . . . . . . . 2-121 01-005-3215 . . . . . . . 2-122 01-006-0324 . . . . . . . 2-122
00-995-0569 . . . . . . . 2-73 01-005-0513 . . . . . . . 2-121 01-005-3216 . . . . . . . 2-122 01-006-0325 . . . . . . . 2-122
00-995-2124 . . . . . . . 2-23 01-005-0515 . . . . . . . 2-121 01-005-3701 . . . . . . . 2-121 01-006-0326 . . . . . . . 2-122
00-995-2125 . . . . . . . 2-22 01-005-0516 . . . . . . . 2-121 01-005-3702 . . . . . . . 2-121 01-006-0327 . . . . . . . 2-122
00-995-3440 . . . . . . . 2-29 01-005-0517 . . . . . . . 2-121 01-005-3703 . . . . . . . 2-121 01-006-0328 . . . . . . . 2-122
00-995-3441 . . . . . . . 2-29 01-005-0518 . . . . . . . 2-121 01-005-3704 . . . . . . . 2-121 01-006-0329 . . . . . . . 2-122
00-995-3442 . . . . . . . 2-29 01-005-0519 . . . . . . . 2-121 01-005-3705 . . . . . . . 2-121 01-006-0330 . . . . . . . 2-122
00-995-3444 . . . . . . . 2-22 01-005-0520 . . . . . . . 2-121 01-005-3706 . . . . . . . 2-121 01-006-2086 . . . . . . . 2-68
. . . . . . . 2-29 01-005-0521 . . . . . . . 2-121 01-005-4042 . . . . . . . 2-121 01-006-2103 . . . . . . . 2-121
00-995-5381 . . . . . . . 2-118 01-005-0522 . . . . . . . 2-121 01-005-4043 . . . . . . . 2-121 01-006-2104 . . . . . . . 2-122
00-995-5382 . . . . . . . 2-118 01-005-0523 . . . . . . . 2-121 01-005-4044 . . . . . . . 2-121 01-006-2105 . . . . . . . 2-122
00-995-6311 . . . . . . . 2-29 01-005-0524 . . . . . . . 2-121 01-005-4045 . . . . . . . 2-121 01-006-2106 . . . . . . . 2-122
00-995-6357 . . . . . . . 2-157 01-005-0525 . . . . . . . 2-121 01-005-4046 . . . . . . . 2-121 01-006-2107 . . . . . . . 2-122
00-995-6630 . . . . . . . 2-93 01-005-0526 . . . . . . . 2-122 01-005-4047 . . . . . . . 2-122 01-006-2108 . . . . . . . 2-122
00-995-6924 . . . . . . . 2-66 01-005-0527 . . . . . . . 2-122 01-005-4048 . . . . . . . 2-122 01-006-2109 . . . . . . . 2-122
00-995-8345 . . . . . . . 2-95 01-005-0528 . . . . . . . 2-122 01-005-4049 . . . . . . . 2-122 01-006-2111 . . . . . . . 2-122
00-995-9678 . . . . . . . 2-66 01-005-0529 . . . . . . . 2-122 01-005-4050 . . . . . . . 2-122 01-006-2112 . . . . . . . 2-122
00-996-7712 . . . . . . . 2-114 01-005-0530 . . . . . . . 2-122 01-005-4051 . . . . . . . 2-122 01-006-2113 . . . . . . . 2-122
00-997-1888 . . . . . . . 2-57 01-005-0531 . . . . . . . 2-122 01-005-4052 . . . . . . . 2-122 01-006-2114 . . . . . . . 2-122
00-997-1972 . . . . . . . 2-80 01-005-0532 . . . . . . . 2-122 01-005-4053 . . . . . . . 2-122 01-006-2116 . . . . . . . 2-122
00-997-2533 . . . . . . . 2-43 01-005-0533 . . . . . . . 2-122 01-005-4054 . . . . . . . 2-122 01-006-2117 . . . . . . . 2-122
00-997-4400 . . . . . . . 2-111 01-005-0537 . . . . . . . 2-122 01-005-4055 . . . . . . . 2-121 01-006-2119 . . . . . . . 2-122
00-997-4727 . . . . . . . 2-84 01-005-0538 . . . . . . . 2-122 01-005-4056 . . . . . . . 2-121 01-006-2120 . . . . . . . 2-122
00-997-7045 . . . . . . . 2-22 01-005-0539 . . . . . . . 2-122 01-005-4057 . . . . . . . 2-121 01-006-2121 . . . . . . . 2-122
00-997-7230 . . . . . . . 2-118 01-005-0541 . . . . . . . 2-122 01-005-4058 . . . . . . . 2-121 01-006-2122 . . . . . . . 2-122
00-998-2936 . . . . . . . 2-19 01-005-0542 . . . . . . . 2-122 01-005-4059 . . . . . . . 2-121 01-006-2123 . . . . . . . 2-122
00-998-3140 . . . . . . . 2-126 01-005-0543 . . . . . . . 2-122 01-005-4060 . . . . . . . 2-122 01-006-2129 . . . . . . . 2-123
00-998-8118 . . . . . . . 2-80 01-005-0544 . . . . . . . 2-122 01-005-4061 . . . . . . . 2-122 01-006-2130 . . . . . . . 2-123
2-221
Page Page Page Page

01-006-2736 . . . . . . . 2-18 01-010-3369 . . . . . . . 2-120 01-017-7014 . . . . . . . 2-163 01-025-4408 . . . . . . . 2-104
01-006-3918 . . . . . . . 2-66 01-010-3370 . . . . . . . 2-120 01-017-8143 . . . . . . . 2-67 01-025-4463 . . . . . . . 2-53
01-006-3930 . . . . . . . 2-120 01-010-3371 . . . . . . . 2-120 01-017-8570 . . . . . . . 2-168 01-025-4479 . . . . . . . 2-91
01-006-3932 . . . . . . . 2-122 01-010-4522 . . . . . . . 2-1 01-017-8571 . . . . . . . 2-168 01-025-4510 . . . . . . . 2-75
01-006-5479 . . . . . . . 2-119 01-010-9776 . . . . . . . 2-73 01-017-8573 . . . . . . . 2-168 01-025-6082 . . . . . . . 2-168
01-006-8963 . . . . . . . 2-28 01-011-1448 . . . . . . . 2-81 01-018-0749 . . . . . . . 2-155 01-026-0579 . . . . . . . 2-130
01-006-9034 . . . . . . . 2-121 01-011-3094 . . . . . . . 2-70 01-018-2287 . . . . . . . 2-68 01-026-0637 . . . . . . . 2-114
01-006-9035 . . . . . . . 2-122 01-011-4057 . . . . . . . 2-123 01-018-3125 . . . . . . . 2-80 01-026-1270 . . . . . . . 2-172
01-006-9048 . . . . . . . 2-125 01-011-5008 . . . . . . . 2-92 01-018-5600 . . . . . . . 2-39 01-026-1706 . . . . . . . 2-121
01-006-9197 . . . . . . . 2-78 01-011-5048 . . . . . . . 2-118 01-018-5663 . . . . . . . 2-123 01-026-3184 . . . . . . . 2-53
01-006-9567 . . . . . . . 2-171 01-011-5049 . . . . . . . 2-118 01-018-6498 . . . . . . . 2-124 01-026-3185 . . . . . . . 2-53
01-007-1517 . . . . . . . 2-35 01-011-5050 . . . . . . . 2-118 01-018-7175 . . . . . . . 2-92 01-026-3244 . . . . . . . 2-169
01-007-1599 . . . . . . . 2-120 01-011-6587 . . . . . . . 2-92 01-018-7176 . . . . . . . 2-92 01-026-5236 . . . . . . . 2-167
01-007-1608 . . . . . . . 2-124 01-013-3718 . . . . . . . 2-120 01-018-9064 . . . . . . . 2-167 01-026-8975 . . . . . . . 2-105
01-007-4887 . . . . . . . 2-120 01-013-3904 . . . . . . . 2-135 01-019-2452 . . . . . . . 2-121 01-027-0930 . . . . . . . 2-92
01-007-4888 . . . . . . . 2-121 01-013-4060 . . . . . . . 2-91 01-019-2616 . . . . . . . 2-125 01-027-4703 . . . . . . . 2-123
01-007-4891 . . . . . . . 2-122 01-013-4160 . . . . . . . 2-138 01-019-2658 . . . . . . . 2-136 01-027-4759 . . . . . . . 2-79
01-007-4892 . . . . . . . 2-122 01-013-5800 . . . . . . . 2-67 01-019-9306 . . . . . . . 2-79 01-027-6495 . . . . . . . 2-155
01-007-4893 . . . . . . . 2-122 01-013-7424 . . . . . . . 2-136 01-020-5369 . . . . . . . 2-166 01-028-1519 . . . . . . . 2-30
01-007-4894 . . . . . . . 2-122 01-013-9040 . . . . . . . 2-149 01-020-5589 . . . . . . . 2-143 01-028-2447 . . . . . . . 2-49
01-007-4895 . . . . . . . 2-122 01-013-9041 . . . . . . . 2-149 01-020-6298 . . . . . . . 2-168 01-028-6511 . . . . . . . 2-123
01-007-4898 . . . . . . . 2-125 01-013-9732 . . . . . . . 2-90 01-020-9510 . . . . . . . 2-126 01-028-7721 . . . . . . . 2-145
01-007-4899 . . . . . . . 2-125 01-013-9733 . . . . . . . 2-90 01-020-9511 . . . . . . . 2-126 01-028-8289 . . . . . . . 2-123
01-007-4985 . . . . . . . 2-175 01-014-1256 . . . . . . . 2-53 01-020-9514 . . . . . . . 2-126 01-029-0816 . . . . . . . 2-89
01-007-5144 . . . . . . . 2-121 01-014-1330 . . . . . . . 2-93 01-020-9516 . . . . . . . 2-126 01-029-6576 . . . . . . . 2-75
01-007-8299 . . . . . . . 2-79 01-014-4276 . . . . . . . 2-68 01-020-9517 . . . . . . . 2-126 01-029-8185 . . . . . . . 2-125
01-007-8798 . . . . . . . 2-124 01-014-4280 . . . . . . . 2-66 01-020-9518 . . . . . . . 2-126 01-030-6854 . . . . . . . 2-141
01-008-2537 . . . . . . . 2-81 01-014-4409 . . . . . . . 2-92 01-020-9519 . . . . . . . 2-126 01-030-8486 . . . . . . . 2-89
01-008-2900 . . . . . . . 2-110 01-014-4414 . . . . . . . 2-92 01-020-9521 . . . . . . . 2-126 01-030-9108 . . . . . . . 2-59
01-008-2901 . . . . . . . 2-110 01-014-6318 . . . . . . . 2-129 01-021-0026 . . . . . . . 2-77 01-030-9217 . . . . . . . 2-55
01-008-2981 . . . . . . . 2-77 01-014-7503 . . . . . . . 2-84 01-021-0191 . . . . . . . 2-183 01-031-0677 . . . . . . . 2-145
01-008-6808 . . . . . . . 2-122 01-015-2600 . . . . . . . 2-168 01-021-0193 . . . . . . . 2-183 01-031-1135 . . . . . . . 2-129
01-008-6847 . . . . . . . 2-103 01-015-2601 . . . . . . . 2-168 01-021-1864 . . . . . . . 2-47 01-031-8197 . . . . . . . 2-155
01-008-6848 . . . . . . . 2-104 01-015-3280 . . . . . . . 2-67 01-021-6285 . . . . . . . 2-121 01-031-8611 . . . . . . . 2-126
01-008-6866 . . . . . . . 2-111 01-015-5831 . . . . . . . 2-52 01-021-6724 . . . . . . . 2-104 01-032-0886 . . . . . . . 2-129
01-008-9345 . . . . . . . 2-60 01-015-6646 . . . . . . . 2-18 01-021-6895 . . . . . . . 2-103 01-032-1641 . . . . . . . 2-31
01-009-0041 . . . . . . . 2-184 01-015-6896 . . . . . . . 2-84 01-021-9180 . . . . . . . 2-58 01-032-2312 . . . . . . . 2-14
01-009-6732 . . . . . . . 2-122 01-015-6956 . . . . . . . 2-98 01-022-3301 . . . . . . . 2-136 01-032-3895 . . . . . . . 2-138
01-009-6735 . . . . . . . 2-120 01-015-9807 . . . . . . . 2-146 01-022-5632 . . . . . . . 2-104 01-032-3896 . . . . . . . 2-138
01-009-6741 . . . . . . . 2-105 01-016-4871 . . . . . . . 2-65 01-023-2224 . . . . . . . 2-150 01-032-6028 . . . . . . . 2-174
01-009-6742 . . . . . . . 2-105 01-016-8180 . . . . . . . 2-134 01-023-2225 . . . . . . . 2-150 01-032-6083 . . . . . . . 2-138
01-009-7105 . . . . . . . 2-45 01-016-8473 . . . . . . . 2-145 01-023-3843 . . . . . . . 2-90 01-032-6181 . . . . . . . 2-73
01-009-7216 . . . . . . . 2-121 01-016-9973 . . . . . . . 2-150 01-023-4192 . . . . . . . 2-184 01-032-6794 . . . . . . . 2-92
01-009-7221 . . . . . . . 2-105 01-017-1436 . . . . . . . 2-164 01-023-4193 . . . . . . . 2-184 01-032-9365 . . . . . . . 2-91
01-009-7223 . . . . . . . 2-105 01-017-1495 . . . . . . . 2-150 01-023-7624 . . . . . . . 2-67 01-033-2157 . . . . . . . 2-174
01-009-7224 . . . . . . . 2-105 01-017-1534 . . . . . . . 2-105 01-023-8161 . . . . . . . 2-114 01-033-8176 . . . . . . . 2-84
01-009-7225 . . . . . . . 2-105 01-017-1535 . . . . . . . 2-105 01-023-9140 . . . . . . . 2-105 01-033-8177 . . . . . . . 2-84
01-010-2224 . . . . . . . 2-154 01-017-2504 . . . . . . . 2-103 01-023-9467 . . . . . . . 2-165 01-033-8178 . . . . . . . 2-84
01-010-2362 . . . . . . . 2-14 01-017-3650 . . . . . . . 2-47 01-024-2512 . . . . . . . 2-123 01-033-8179 . . . . . . . 2-84
01-010-2419 . . . . . . . 2-124 01-017-3927 . . . . . . . 2-104 01-024-8141 . . . . . . . 2-106 01-033-8180 . . . . . . . 2-84
01-010-2420 . . . . . . . 2-124 01-017-4148 . . . . . . . 2-66 01-025-1819 . . . . . . . 2-53 01-033-8181 . . . . . . . 2-84
01-010-2640 . . . . . . . 2-99 01-017-4185 . . . . . . . 2-83 01-025-2658 . . . . . . . 2-174 01-033-8637 . . . . . . . 2-84
01-010-2643 . . . . . . . 2-99 01-017-6535 . . . . . . . 2-123 01-025-4391 . . . . . . . 2-63 01-033-8638 . . . . . . . 2-84
2-222
Page Page Page Page

01-033-8639 . . . . . . . 2-84 01-042-0969 . . . . . . . 2-183 01-048-9669 . . . . . . . 2-96 01-058-5367 . . . . . . . 2-46
01-033-8641 . . . . . . . 2-84 01-042-0970 . . . . . . . 2-183 01-049-0159 . . . . . . . 2-77 01-058-5372 . . . . . . . 2-46
01-033-8642 . . . . . . . 2-84 01-042-0971 . . . . . . . 2-183 01-049-3960 . . . . . . . 2-104 01-058-5413 . . . . . . . 2-119
01-033-9093 . . . . . . . 2-103 01-042-0972 . . . . . . . 2-183 01-049-6595 . . . . . . . 2-123 01-058-7049 . . . . . . . 2-47
01-033-9125 . . . . . . . 2-84 01-042-0976 . . . . . . . 2-183 01-050-1525 . . . . . . . 2-71 01-058-8403 . . . . . . . 2-46
01-033-9126 . . . . . . . 2-84 01-042-1270 . . . . . . . 2-112 01-050-1537 . . . . . . . 2-123 01-059-0262 . . . . . . . 2-63
01-033-9127 . . . . . . . 2-84 01-042-2872 . . . . . . . 2-112 01-050-1538 . . . . . . . 2-124 01-059-1931 . . . . . . . 2-31
01-033-9128 . . . . . . . 2-84 01-042-2894 . . . . . . . 2-85 01-050-1539 . . . . . . . 2-124 01-060-7101 . . . . . . . 2-30
01-033-9663 . . . . . . . 2-84 01-042-2999 . . . . . . . 2-99 01-050-3844 . . . . . . . 2-110 01-061-2296 . . . . . . . 2-137
01-034-0564 . . . . . . . 2-36 01-042-4410 . . . . . . . 2-22 01-050-5043 . . . . . . . 2-156 01-061-2939 . . . . . . . 2-159
01-034-1883 . . . . . . . 2-84 01-042-8879 . . . . . . . 2-104 01-050-6289 . . . . . . . 2-73 01-061-7482 . . . . . . . 2-158
01-034-1884 . . . . . . . 2-84 01-043-1419 . . . . . . . 2-124 01-052-0043 . . . . . . . 2-130 01-062-3628 . . . . . . . 2-134
01-034-1885 . . . . . . . 2-84 01-043-1904 . . . . . . . 2-123 01-052-1049 . . . . . . . 2-79 01-062-4465 . . . . . . . 2-120
01-034-1886 . . . . . . . 2-84 01-043-3468 . . . . . . . 2-127 01-052-2340 . . . . . . . 2-104 01-062-6452 . . . . . . . 2-35
01-034-2843 . . . . . . . 2-84 01-043-7077 . . . . . . . 2-135 01-053-1009 . . . . . . . 2-118 01-063-1192 . . . . . . . 2-135
01-034-2869 . . . . . . . 2-90 01-043-7078 . . . . . . . 2-135 01-053-1903 . . . . . . . 2-18 01-063-1758 . . . . . . . 2-63
01-034-3993 . . . . . . . 2-19 01-043-7885 . . . . . . . 2-90 01-053-2919 . . . . . . . 2-113 01-063-1759 . . . . . . . 2-60
01-034-6673 . . . . . . . 2-84 01-044-0690 . . . . . . . 2-102 01-053-7004 . . . . . . . 2-63 01-063-2033 . . . . . . . 2-173
01-034-6798 . . . . . . . 2-145 01-044-2385 . . . . . . . 2-51 01-053-7128 . . . . . . . 2-140 01-063-5071 . . . . . . . 2-62
01-034-7814 . . . . . . . 2-78 01-044-2864 . . . . . . . 2-103 01-053-7130 . . . . . . . 2-140 01-063-6417 . . . . . . . 2-32
01-035-6183 . . . . . . . 2-84 01-044-5989 . . . . . . . 2-64 01-053-8958 . . . . . . . 2-156 01-063-8188 . . . . . . . 2-143
01-035-6624 . . . . . . . 2-173 01-044-6482 . . . . . . . 2-102 01-054-2554 . . . . . . . 2-63 01-064-5458 . . . . . . . 2-48
01-036-2824 . . . . . . . 2-84 01-044-7084 . . . . . . . 2-173 01-054-2555 . . . . . . . 2-63 01-064-6263 . . . . . . . 2-39
01-037-0486 . . . . . . . 2-9 01-044-7273 . . . . . . . 2-61 01-054-8398 . . . . . . . 2-17 01-064-6264 . . . . . . . 2-39
01-037-1249 . . . . . . . 2-84 01-044-7515 . . . . . . . 2-104 01-055-3790 . . . . . . . 2-46 01-064-8065 . . . . . . . 2-128
01-037-4236 . . . . . . . 2-110 01-044-7973 . . . . . . . 2-136 01-055-3853 . . . . . . . 2-61 01-064-8787 . . . . . . . 2-59
01-037-5244 . . . . . . . 2-79 01-045-2457 . . . . . . . 2-34 01-055-3854 . . . . . . . 2-61 01-065-5958 . . . . . . . 2-105
01-037-9351 . . . . . . . 2-101 01-045-6635 . . . . . . . 2-113 01-056-2966 . . . . . . . 2-63 01-065-6542 . . . . . . . 2-60
01-038-2503 . . . . . . . 2-103 01-045-6640 . . . . . . . 2-113 01-056-3267 . . . . . . . 2-157 01-065-6769 . . . . . . . 2-184
01-039-0334 . . . . . . . 2-135 01-045-9724 . . . . . . . 2-77 01-057-1356 . . . . . . . 2-138 . . . . . . . 2-184
01-039-7435 . . . . . . . 2-81 01-045-9992 . . . . . . . 2-161 01-057-1490 . . . . . . . 2-80 01-065-6939 . . . . . . . 2-98
01-040-4793 . . . . . . . 2-104 01-046-0440 . . . . . . . 2-103 01-057-2856 . . . . . . . 2-174 01-065-9787 . . . . . . . 2-98
01-040-4810 . . . . . . . 2-84 01-046-0628 . . . . . . . 2-124 01-057-2857 . . . . . . . 2-174 01-065-9917 . . . . . . . 2-135
01-040-4811 . . . . . . . 2-84 01-046-1135 . . . . . . . 2-167 01-057-2858 . . . . . . . 2-67 01-066-1248 . . . . . . . 2-175
01-040-8666 . . . . . . . 2-115 01-046-3018 . . . . . . . 2-36 01-057-2883 . . . . . . . 2-76 01-066-2537 . . . . . . . 2-73
01-041-2868 . . . . . . . 2-61 01-046-3299 . . . . . . . 2-124 01-057-2996 . . . . . . . 2-174 01-066-3936 . . . . . . . 2-127
01-041-3399 . . . . . . . 2-126 01-046-3300 . . . . . . . 2-124 01-057-3311 . . . . . . . 2-75 01-066-9076 . . . . . . . 2-70
01-041-4367 . . . . . . . 2-166 01-046-3934 . . . . . . . 2-114 01-057-5519 . . . . . . . 2-67 01-067-3419 . . . . . . . 2-64
01-041-4651 . . . . . . . 2-66 01-046-5888 . . . . . . . 2-135 01-057-7116 . . . . . . . 2-175 01-067-3768 . . . . . . . 2-172
01-041-4652 . . . . . . . 2-66 01-046-5903 . . . . . . . 2-136 01-057-7256 . . . . . . . 2-90 01-067-7086 . . . . . . . 2-157
01-041-4777 . . . . . . . 2-113 01-047-0435 . . . . . . . 2-124 01-057-9175 . . . . . . . 2-162 01-067-9589 . . . . . . . 2-69
01-041-6357 . . . . . . . 2-113 01-047-2908 . . . . . . . 2-123 01-057-9288 . . . . . . . 2-173 01-067-9630 . . . . . . . 2-107
01-041-9514 . . . . . . . 2-135 01-047-6088 . . . . . . . 2-130 01-057-9328 . . . . . . . 2-17 01-068-1252 . . . . . . . 2-133
01-041-9692 . . . . . . . 2-113 01-047-6710 . . . . . . . 2-168 01-057-9350 . . . . . . . 2-63 01-068-6411 . . . . . . . 2-98
01-041-9697 . . . . . . . 2-113 01-047-6712 . . . . . . . 2-171 01-057-9351 . . . . . . . 2-63 01-068-6412 . . . . . . . 2-98
01-041-9716 . . . . . . . 2-112 01-047-9335 . . . . . . . 2-81 01-057-9352 . . . . . . . 2-63 01-068-7379 . . . . . . . 2-104
01-042-0962 . . . . . . . 2-183 01-047-9525 . . . . . . . 2-90 01-057-9353 . . . . . . . 2-63 01-068-7503 . . . . . . . 2-98
01-042-0963 . . . . . . . 2-183 01-047-9944 . . . . . . . 2-81 01-058-4008 . . . . . . . 2-123 01-069-2778 . . . . . . . 2-98
01-042-0964 . . . . . . . 2-183 01-048-0127 . . . . . . . 2-98 01-058-4009 . . . . . . . 2-123 01-070-0928 . . . . . . . 2-62
01-042-0965 . . . . . . . 2-183 01-048-0795 . . . . . . . 2-136 01-058-4590 . . . . . . . 2-103 01-071-1297 . . . . . . . 2-29
01-042-0966 . . . . . . . 2-183 01-048-6122 . . . . . . . 2-114 01-058-4659 . . . . . . . 2-63 01-071-1299 . . . . . . . 2-29
01-042-0967 . . . . . . . 2-183 01-048-6123 . . . . . . . 2-114 01-058-4661 . . . . . . . 2-65 01-071-1306 . . . . . . . 2-30
01-042-0968 . . . . . . . 2-183 01-048-6162 . . . . . . . 2-114 01-058-5324 . . . . . . . 2-103 01-071-8176 . . . . . . . 2-103
2-223
Page Page Page Page

01-071-9006 . . . . . . . 2-170 01-086-3597 . . . . . . . 2-84 01-102-8473 . . . . . . . 2-64 01-112-1765 . . . . . . . 2-123
01-072-8343 . . . . . . . 2-79 01-086-9895 . . . . . . . 2-71 01-103-1785 . . . . . . . 2-119 01-112-2822 . . . . . . . 2-135
01-072-9846 . . . . . . . 2-146 01-087-1145 . . . . . . . 2-19 01-103-2596 . . . . . . . 2-123 01-112-4059 . . . . . . . 2-124
01-073-2809 . . . . . . . 2-141 01-087-8841 . . . . . . . 2-84 01-103-5142 . . . . . . . 2-173 01-112-4060 . . . . . . . 2-124
01-073-7408 . . . . . . . 2-156 01-088-0314 . . . . . . . 2-108 01-103-7575 . . . . . . . 2-160 01-112-8105 . . . . . . . 2-81
01-073-8614 . . . . . . . 2-70 01-088-2490 . . . . . . . 2-59 01-103-7896 . . . . . . . 2-36 01-113-1146 . . . . . . . 2-168
01-073-9174 . . . . . . . 2-47 01-088-5363 . . . . . . . 2-124 01-103-7939 . . . . . . . 2-67 01-113-2083 . . . . . . . 2-124
01-074-2075 . . . . . . . 2-47 01-088-6106 . . . . . . . 2-123 01-103-8804 . . . . . . . 2-35 01-113-4018 . . . . . . . 2-12
01-074-2151 . . . . . . . 2-52 01-088-6108 . . . . . . . 2-124 01-104-1052 . . . . . . . 2-34 01-113-5624 . . . . . . . 2-124
01-074-7875 . . . . . . . 2-183 01-088-6871 . . . . . . . 2-123 01-104-4411 . . . . . . . 2-123 01-113-9744 . . . . . . . 2-22
01-075-4629 . . . . . . . 2-155 01-088-8911 . . . . . . . 2-110 01-104-4906 . . . . . . . 2-123 01-113-9871 . . . . . . . 2-123
01-076-2995 . . . . . . . 2-110 01-088-8982 . . . . . . . 2-91 01-104-4957 . . . . . . . 2-156 01-115-2216 . . . . . . . 2-124
01-076-3206 . . . . . . . 2-106 01-089-1520 . . . . . . . 2-22 01-104-5943 . . . . . . . 2-123 01-115-3435 . . . . . . . 2-65
01-076-3509 . . . . . . . 2-174 01-089-1583 . . . . . . . 2-124 01-104-6069 . . . . . . . 2-79 01-115-5430 . . . . . . . 2-73
01-076-9499 . . . . . . . 2-90 01-089-5672 . . . . . . . 2-70 01-105-6662 . . . . . . . 2-124 01-115-8562 . . . . . . . 2-48
01-077-0221 . . . . . . . 2-107 01-089-7675 . . . . . . . 2-80 01-105-7241 . . . . . . . 2-64 01-115-8798 . . . . . . . 2-91
01-077-0685 . . . . . . . 2-81 01-090-2868 . . . . . . . 2-110 01-105-7473 . . . . . . . 2-173 01-116-7368 . . . . . . . 2-11
01-077-0687 . . . . . . . 2-81 01-090-3166 . . . . . . . 2-84 01-105-9152 . . . . . . . 2-123 01-117-1076 . . . . . . . 2-124
01-077-3910 . . . . . . . 2-130 01-091-1004 . . . . . . . 2-161 01-105-9153 . . . . . . . 2-123 01-117-4284 . . . . . . . 2-149
01-077-4980 . . . . . . . 2-94 01-091-1013 . . . . . . . 2-104 01-105-9154 . . . . . . . 2-123 01-117-4285 . . . . . . . 2-149
01-077-7099 . . . . . . . 2-29 01-091-1248 . . . . . . . 2-67 01-105-9613 . . . . . . . 2-135 01-117-7817 . . . . . . . 2-80
01-077-7518 . . . . . . . 2-94 01-091-1864 . . . . . . . 2-84 01-106-0336 . . . . . . . 2-81 01-118-0935 . . . . . . . 2-99
01-078-3829 . . . . . . . 2-174 01-091-6942 . . . . . . . 2-85 01-106-0936 . . . . . . . 2-123 01-118-2914 . . . . . . . 2-74
01-078-8859 . . . . . . . 2-104 01-091-9175 . . . . . . . 2-84 01-106-0938 . . . . . . . 2-123 01-118-7701 . . . . . . . 2-124
01-078-9283 . . . . . . . 2-181 01-091-9177 . . . . . . . 2-84 01-106-0940 . . . . . . . 2-123 01-118-8932 . . . . . . . 2-76
01-079-1758 . . . . . . . 2-135 01-092-0238 . . . . . . . 2-64 01-106-0942 . . . . . . . 2-123 01-118-9593 . . . . . . . 2-17
01-079-6678 . . . . . . . 2-174 01-092-0259 . . . . . . . 2-104 01-106-0943 . . . . . . . 2-121 . . . . . . . 2-17
01-079-8205 . . . . . . . 2-95 01-092-1458 . . . . . . . 2-111 01-106-1144 . . . . . . . 2-59 01-119-1998 . . . . . . . 2-59
01-080-8977 . . . . . . . 2-162 01-092-2125 . . . . . . . 2-84 01-106-5220 . . . . . . . 2-46 01-119-2011 . . . . . . . 2-104
01-080-8978 . . . . . . . 2-162 01-092-5007 . . . . . . . 2-58 01-106-5271 . . . . . . . 2-65 01-119-3220 . . . . . . . 2-123
01-081-0912 . . . . . . . 2-77 01-092-5494 . . . . . . . 2-68 01-106-7288 . . . . . . . 2-123 01-119-5093 . . . . . . . 2-87
01-081-2546 . . . . . . . 2-84 01-092-6000 . . . . . . . 2-175 01-106-7289 . . . . . . . 2-121 01-119-5955 . . . . . . . 2-154
01-081-5443 . . . . . . . 2-12 01-092-6071 . . . . . . . 2-15 01-106-7290 . . . . . . . 2-123 01-119-9022 . . . . . . . 2-99
01-081-7360 . . . . . . . 2-11 01-092-6976 . . . . . . . 2-84 01-106-8237 . . . . . . . 2-46 01-119-9024 . . . . . . . 2-99
01-081-8282 . . . . . . . 2-134 01-092-8739 . . . . . . . 2-69 01-106-8238 . . . . . . . 2-46 01-120-0867 . . . . . . . 2-47
01-082-2048 . . . . . . . 2-18 01-093-0987 . . . . . . . 2-170 01-107-1224 . . . . . . . 2-46 01-120-5115 . . . . . . . 2-48
01-082-2171 . . . . . . . 2-83 01-094-2863 . . . . . . . 2-77 01-107-4620 . . . . . . . 2-46 01-120-9550 . . . . . . . 2-123
01-082-7052 . . . . . . . 2-26 01-095-8228 . . . . . . . 2-172 01-107-4949 . . . . . . . 2-124 01-121-0176 . . . . . . . 2-138
01-083-6532 . . . . . . . 2-86 01-096-5143 . . . . . . . 2-167 01-107-4950 . . . . . . . 2-124 01-121-2623 . . . . . . . 2-174
01-084-4706 . . . . . . . 2-11 01-097-5771 . . . . . . . 2-67 01-107-4954 . . . . . . . 2-124 01-121-5664 . . . . . . . 2-77
01-084-4707 . . . . . . . 2-11 01-097-6619 . . . . . . . 2-124 01-107-4955 . . . . . . . 2-124 01-121-8092 . . . . . . . 2-123
01-084-4708 . . . . . . . 2-11 01-097-7966 . . . . . . . 2-58 01-107-4960 . . . . . . . 2-124 01-121-8809 . . . . . . . 2-174
01-084-4911 . . . . . . . 2-73 01-097-8025 . . . . . . . 2-66 01-107-4961 . . . . . . . 2-124 01-122-6138 . . . . . . . 2-158
01-084-6089 . . . . . . . 2-84 01-097-8957 . . . . . . . 2-124 01-107-4962 . . . . . . . 2-124 01-123-3007 . . . . . . . 2-78
01-084-6090 . . . . . . . 2-84 01-098-4490 . . . . . . . 2-167 01-107-4963 . . . . . . . 2-124 01-123-3298 . . . . . . . 2-124
01-084-6093 . . . . . . . 2-84 01-098-6144 . . . . . . . 2-14 01-107-9249 . . . . . . . 2-124 01-123-3299 . . . . . . . 2-124
01-084-6101 . . . . . . . 2-84 01-099-0352 . . . . . . . 2-98 01-108-0843 . . . . . . . 2-173 01-123-3300 . . . . . . . 2-124
01-084-9235 . . . . . . . 2-84 01-099-9652 . . . . . . . 2-81 01-108-4418 . . . . . . . 2-46 01-123-3303 . . . . . . . 2-124
01-085-1240 . . . . . . . 2-84 01-100-0596 . . . . . . . 2-14 01-108-9376 . . . . . . . 2-46 01-123-5639 . . . . . . . 2-65
01-085-3262 . . . . . . . 2-106 01-100-3985 . . . . . . . 2-46 01-110-1412 . . . . . . . 2-124 01-123-8675 . . . . . . . 2-78
01-085-3321 . . . . . . . 2-84 01-101-9492 . . . . . . . 2-125 01-110-2456 . . . . . . . 2-67 01-124-5218 . . . . . . . 2-174
01-085-4234 . . . . . . . 2-135 01-102-1861 . . . . . . . 2-35 01-110-7915 . . . . . . . 2-63 01-125-0508 . . . . . . . 2-94
01-085-6104 . . . . . . . 2-10 01-102-1863 . . . . . . . 2-48 01-110-8136 . . . . . . . 2-163 01-125-0938 . . . . . . . 2-104
2-224
Page Page Page Page

01-125-1225 . . . . . . . 2-64 01-133-7190 . . . . . . . 2-30 01-145-4045 . . . . . . . 2-77 01-160-4345 . . . . . . . 2-124
01-125-1731 . . . . . . . 2-123 01-133-7300 . . . . . . . 2-84 01-145-5160 . . . . . . . 2-125 01-160-4346 . . . . . . . 2-124
01-125-9019 . . . . . . . 2-46 01-133-9790 . . . . . . . 2-123 01-145-5162 . . . . . . . 2-125 01-160-4347 . . . . . . . 2-124
01-126-9148 . . . . . . . 2-58 01-134-5792 . . . . . . . 2-64 01-145-5766 . . . . . . . 2-172 01-160-4348 . . . . . . . 2-124
01-127-0849 . . . . . . . 2-123 01-134-5794 . . . . . . . 2-65 01-146-0564 . . . . . . . 2-166 01-160-4349 . . . . . . . 2-124
01-127-0929 . . . . . . . 2-76 01-134-5839 . . . . . . . 2-84 01-146-3594 . . . . . . . 2-18 01-160-4638 . . . . . . . 2-80
01-127-0971 . . . . . . . 2-123 01-134-5844 . . . . . . . 2-84 01-146-4563 . . . . . . . 2-124 01-160-5701 . . . . . . . 2-18
01-127-0972 . . . . . . . 2-123 01-134-5907 . . . . . . . 2-96 01-146-7318 . . . . . . . 2-110 01-160-6837 . . . . . . . 2-18
01-128-5065 . . . . . . . 2-174 01-135-1149 . . . . . . . 2-18 01-146-9799 . . . . . . . 2-76 01-160-6842 . . . . . . . 2-55
01-128-6071 . . . . . . . 2-125 01-135-2401 . . . . . . . 2-18 01-147-4307 . . . . . . . 2-168 01-161-4498 . . . . . . . 2-124
01-129-0151 . . . . . . . 2-74 01-135-4159 . . . . . . . 2-63 01-147-5360 . . . . . . . 2-67 01-161-6234 . . . . . . . 2-137
01-129-0607 . . . . . . . 2-65 01-135-6490 . . . . . . . 2-18 01-147-5361 . . . . . . . 2-64 01-162-4704 . . . . . . . 2-124
01-129-0740 . . . . . . . 2-99 01-135-6799 . . . . . . . 2-84 01-147-6778 . . . . . . . 2-161 01-162-4705 . . . . . . . 2-124
01-129-2018 . . . . . . . 2-125 01-135-7319 . . . . . . . 2-84 01-147-9889 . . . . . . . 2-161 01-162-4706 . . . . . . . 2-124
01-129-2730 . . . . . . . 2-123 01-135-9617 . . . . . . . 2-93 01-148-2691 . . . . . . . 2-123 01-162-5765 . . . . . . . 2-157
01-129-3538 . . . . . . . 2-79 01-136-1782 . . . . . . . 2-84 01-150-6032 . . . . . . . 2-77 01-162-8844 . . . . . . . 2-94
01-129-4375 . . . . . . . 2-66 01-136-1785 . . . . . . . 2-84 01-151-0703 . . . . . . . 2-81 01-163-5499 . . . . . . . 2-137
01-129-4525 . . . . . . . 2-84 01-136-1787 . . . . . . . 2-84 01-151-1061 . . . . . . . 2-84 01-163-5873 . . . . . . . 2-86
01-129-6623 . . . . . . . 2-66 01-136-3540 . . . . . . . 2-46 01-152-2593 . . . . . . . 2-46 01-163-6668 . . . . . . . 2-73
01-129-6962 . . . . . . . 2-125 01-136-3562 . . . . . . . 2-84 01-152-4026 . . . . . . . 2-30 01-163-8247 . . . . . . . 2-13
01-129-9438 . . . . . . . 2-124 01-136-4144 . . . . . . . 2-93 01-152-9899 . . . . . . . 2-80 01-163-8248 . . . . . . . 2-18
01-130-0585 . . . . . . . 2-35 01-136-4497 . . . . . . . 2-84 01-154-3202 . . . . . . . 2-79 01-163-9296 . . . . . . . 2-11
01-130-0933 . . . . . . . 2-93 01-136-7144 . . . . . . . 2-47 01-155-1880 . . . . . . . 2-47 01-164-4481 . . . . . . . 2-11
01-130-1058 . . . . . . . 2-73 01-136-8361 . . . . . . . 2-84 01-156-5313 . . . . . . . 2-146 01-164-8556 . . . . . . . 2-119
01-130-1344 . . . . . . . 2-169 01-137-8392 . . . . . . . 2-123 01-156-5481 . . . . . . . 2-137 01-165-4518 . . . . . . . 2-125
01-130-3273 . . . . . . . 2-18 01-137-8983 . . . . . . . 2-65 01-156-5482 . . . . . . . 2-137 01-165-7518 . . . . . . . 2-41
01-130-7114 . . . . . . . 2-174 01-137-9007 . . . . . . . 2-123 01-156-5483 . . . . . . . 2-137 01-165-7581 . . . . . . . 2-119
01-130-7335 . . . . . . . 2-106 01-137-9792 . . . . . . . 2-136 01-157-3064 . . . . . . . 2-80 01-166-1026 . . . . . . . 2-120
01-130-8881 . . . . . . . 2-7 01-138-0797 . . . . . . . 2-76 01-158-7836 . . . . . . . 2-18 01-166-1706 . . . . . . . 2-18
01-130-9665 . . . . . . . 2-125 01-138-4230 . . . . . . . 2-67 01-159-1287 . . . . . . . 2-30 01-166-3641 . . . . . . . 2-19
01-131-2193 . . . . . . . 2-17 01-138-4239 . . . . . . . 2-84 01-159-9411 . . . . . . . 2-84 01-167-0472 . . . . . . . 2-47
01-131-2206 . . . . . . . 2-18 01-138-6288 . . . . . . . 2-49 01-160-0398 . . . . . . . 2-137 01-167-0473 . . . . . . . 2-47
01-131-2209 . . . . . . . 2-18 01-138-9183 . . . . . . . 2-70 01-160-2508 . . . . . . . 2-124 01-167-3291 . . . . . . . 2-20
01-131-3045 . . . . . . . 2-99 01-139-1268 . . . . . . . 2-157 01-160-4324 . . . . . . . 2-124 01-167-9321 . . . . . . . 2-144
01-131-3365 . . . . . . . 2-94 01-139-1544 . . . . . . . 2-93 01-160-4326 . . . . . . . 2-124 01-167-9770 . . . . . . . 2-123
01-131-6720 . . . . . . . 2-46 01-139-4490 . . . . . . . 2-93 01-160-4327 . . . . . . . 2-124 01-168-0877 . . . . . . . 2-18
01-131-6733 . . . . . . . 2-17 01-139-6528 . . . . . . . 2-96 01-160-4328 . . . . . . . 2-124 01-168-0882 . . . . . . . 2-65
01-131-7548 . . . . . . . 2-46 01-139-7444 . . . . . . . 2-9 01-160-4329 . . . . . . . 2-124 01-168-5628 . . . . . . . 2-47
01-132-0054 . . . . . . . 2-81 01-140-9118 . . . . . . . 2-14 01-160-4330 . . . . . . . 2-124 01-169-0657 . . . . . . . 2-124
01-132-0617 . . . . . . . 2-81 01-140-9950 . . . . . . . 2-77 01-160-4331 . . . . . . . 2-124 01-169-2070 . . . . . . . 2-46
01-132-1925 . . . . . . . 2-123 01-141-4074 . . . . . . . 2-78 01-160-4332 . . . . . . . 2-124 01-169-6770 . . . . . . . 2-17
01-132-3503 . . . . . . . 2-98 01-141-6672 . . . . . . . 2-67 01-160-4333 . . . . . . . 2-124 01-169-8346 . . . . . . . 2-81
01-132-3561 . . . . . . . 2-73 01-142-2138 . . . . . . . 2-47 01-160-4334 . . . . . . . 2-124 01-169-9417 . . . . . . . 2-47
01-132-6508 . . . . . . . 2-18 01-142-3218 . . . . . . . 2-59 01-160-4335 . . . . . . . 2-124 01-169-9627 . . . . . . . 2-65
01-132-6509 . . . . . . . 2-18 01-142-3595 . . . . . . . 2-81 01-160-4336 . . . . . . . 2-124 01-170-8578 . . . . . . . 2-98
01-132-8924 . . . . . . . 2-161 01-142-9400 . . . . . . . 2-46 01-160-4337 . . . . . . . 2-124 01-171-5954 . . . . . . . 2-99
01-133-0168 . . . . . . . 2-48 01-143-3989 . . . . . . . 2-47 01-160-4338 . . . . . . . 2-124 01-171-8936 . . . . . . . 2-168
01-133-2195 . . . . . . . 2-18 01-143-5075 . . . . . . . 2-84 01-160-4339 . . . . . . . 2-124 01-172-2432 . . . . . . . 2-124
01-133-2233 . . . . . . . 2-84 01-143-5079 . . . . . . . 2-84 01-160-4340 . . . . . . . 2-124 01-172-7117 . . . . . . . 2-68
01-133-4457 . . . . . . . 2-26 01-144-1019 . . . . . . . 2-104 01-160-4341 . . . . . . . 2-124 01-172-7118 . . . . . . . 2-64
01-133-4718 . . . . . . . 2-124 01-144-1661 . . . . . . . 2-123 01-160-4342 . . . . . . . 2-124 01-173-0381 . . . . . . . 2-97
01-133-5812 . . . . . . . 2-47 01-144-9036 . . . . . . . 2-164 01-160-4343 . . . . . . . 2-124 01-173-0382 . . . . . . . 2-99
01-133-5889 . . . . . . . 2-84 01-145-3153 . . . . . . . 2-65 01-160-4344 . . . . . . . 2-124 01-173-6806 . . . . . . . 2-18
2-225
Page Page Page Page

01-174-0214 . . . . . . . 2-124 01-191-2598 . . . . . . . 2-98 01-213-9668 . . . . . . . 2-135 01-278-9668 . . . . . . . 2-52
01-174-3283 . . . . . . . 2-124 01-191-6400 . . . . . . . 2-99 01-214-3955 . . . . . . . 2-169 01-279-3378 . . . . . . . 2-85
01-174-7868 . . . . . . . 2-123 01-191-7558 . . . . . . . 2-98 01-215-3775 . . . . . . . 2-49 01-279-3379 . . . . . . . 2-85
01-175-0311 . . . . . . . 2-124 01-191-7559 . . . . . . . 2-98 01-215-7315 . . . . . . . 2-64 01-279-3380 . . . . . . . 2-85
01-175-0610 . . . . . . . 2-11 01-191-8248 . . . . . . . 2-18 01-216-8806 . . . . . . . 2-104 01-279-3844 . . . . . . . 2-85
01-175-1082 . . . . . . . 2-99 01-193-2380 . . . . . . . 2-18 01-216-9635 . . . . . . . 2-99 01-279-3845 . . . . . . . 2-85
01-175-9164 . . . . . . . 2-123 01-193-3331 . . . . . . . 2-173 01-217-4040 . . . . . . . 2-111 01-279-3847 . . . . . . . 2-85
01-176-4014 . . . . . . . 2-123 01-193-6859 . . . . . . . 2-18 01-217-5068 . . . . . . . 2-143 01-280-4613 . . . . . . . 2-85
01-176-5990 . . . . . . . 2-81 01-194-3200 . . . . . . . 2-135 01-217-7264 . . . . . . . 2-10 01-281-5116 . . . . . . . 2-144
01-176-7383 . . . . . . . 2-18 01-194-3201 . . . . . . . 2-135 01-217-9283 . . . . . . . 2-81 01-281-9740 . . . . . . . 2-181
01-177-5887 . . . . . . . 2-46 01-194-8964 . . . . . . . 2-123 01-219-7208 . . . . . . . 2-67 01-281-9741 . . . . . . . 2-181
01-177-9614 . . . . . . . 2-139 01-194-9318 . . . . . . . 2-98 01-219-9943 . . . . . . . 2-138 01-283-1776 . . . . . . . 2-114
01-179-0252 . . . . . . . 2-124 01-195-7950 . . . . . . . 2-18 01-220-0193 . . . . . . . 2-17 01-283-2460 . . . . . . . 2-52
01-180-2612 . . . . . . . 2-77 01-195-8733 . . . . . . . 2-124 01-221-3230 . . . . . . . 2-36 01-283-3605 . . . . . . . 2-13
01-180-5228 . . . . . . . 2-123 01-196-3247 . . . . . . . 2-55 01-225-1324 . . . . . . . 2-134 01-283-5964 . . . . . . . 2-76
01-180-5229 . . . . . . . 2-123 01-197-2550 . . . . . . . 2-18 01-225-7813 . . . . . . . 2-53 01-283-6469 . . . . . . . 2-14
01-180-8853 . . . . . . . 2-165 01-197-3378 . . . . . . . 2-94 01-227-1329 . . . . . . . 2-73 01-285-7723 . . . . . . . 2-14
01-181-0802 . . . . . . . 2-48 01-197-6607 . . . . . . . 2-18 . . . . . . . 2-74 01-285-7796 . . . . . . . 2-78
01-181-7463 . . . . . . . 2-45 01-197-9414 . . . . . . . 2-46 01-227-6239 . . . . . . . 2-60 01-286-0870 . . . . . . . 2-46
01-181-7476 . . . . . . . 2-31 01-199-1332 . . . . . . . 2-12 01-227-6396 . . . . . . . 2-11 01-287-9030 . . . . . . . 2-171
01-181-8156 . . . . . . . 2-73 01-199-1335 . . . . . . . 2-18 01-228-6118 . . . . . . . 2-145 01-287-9031 . . . . . . . 2-171
01-182-7410 . . . . . . . 2-124 01-199-1354 . . . . . . . 2-65 01-229-0315 . . . . . . . 2-96 01-287-9035 . . . . . . . 2-171
01-182-8670 . . . . . . . 2-123 01-199-5370 . . . . . . . 2-124 01-229-8280 . . . . . . . 2-99 01-288-5666 . . . . . . . 2-86
01-183-0978 . . . . . . . 2-135 01-199-5374 . . . . . . . 2-124 01-231-3326 . . . . . . . 2-85 01-288-7881 . . . . . . . 2-91
01-183-0979 . . . . . . . 2-124 01-199-5375 . . . . . . . 2-123 01-231-3912 . . . . . . . 2-52 01-289-6073 . . . . . . . 2-86
01-183-0983 . . . . . . . 2-124 01-200-6068 . . . . . . . 2-65 01-232-2036 . . . . . . . 2-66 01-289-9753 . . . . . . . 2-174
01-183-0984 . . . . . . . 2-124 01-201-2237 . . . . . . . 2-46 01-232-3542 . . . . . . . 2-59 01-290-3803 . . . . . . . 2-85
01-183-0985 . . . . . . . 2-124 01-201-4778 . . . . . . . 2-169 01-232-5265 . . . . . . . 2-170 01-291-2267 . . . . . . . 2-85
01-183-0986 . . . . . . . 2-124 01-201-8980 . . . . . . . 2-83 01-234-1461 . . . . . . . 2-85 01-291-2290 . . . . . . . 2-76
01-183-0987 . . . . . . . 2-124 01-202-6848 . . . . . . . 2-46 01-234-7725 . . . . . . . 2-145 01-292-4330 . . . . . . . 2-67
01-183-4373 . . . . . . . 2-161 01-203-2327 . . . . . . . 2-123 01-235-1359 . . . . . . . 2-145 01-293-1818 . . . . . . . 2-53
01-183-5868 . . . . . . . 2-18 01-203-5149 . . . . . . . 2-64 01-236-1685 . . . . . . . 2-57 01-294-3149 . . . . . . . 2-53
01-183-9169 . . . . . . . 2-123 01-203-6549 . . . . . . . 2-123 01-237-0521 . . . . . . . 2-47 01-294-4356 . . . . . . . 2-52
01-184-2045 . . . . . . . 2-99 01-204-4045 . . . . . . . 2-83 01-237-1177 . . . . . . . 2-93 01-294-8593 . . . . . . . 2-66
01-184-5785 . . . . . . . 2-74 01-204-4046 . . . . . . . 2-83 01-237-2144 . . . . . . . 2-172 01-295-5111 . . . . . . . 2-66
01-184-7576 . . . . . . . 2-123 01-204-4371 . . . . . . . 2-20 01-238-3768 . . . . . . . 2-135 01-296-7806 . . . . . . . 2-11
01-185-1927 . . . . . . . 2-124 01-204-5517 . . . . . . . 2-99 01-239-7934 . . . . . . . 2-110 01-296-7819 . . . . . . . 2-14
01-185-2902 . . . . . . . 2-99 01-204-5518 . . . . . . . 2-99 01-239-8048 . . . . . . . 2-76 01-296-9818 . . . . . . . 2-174
01-185-8696 . . . . . . . 2-71 01-205-3173 . . . . . . . 2-122 01-242-6133 . . . . . . . 2-81 01-297-3878 . . . . . . . 2-154
01-186-3520 . . . . . . . 2-99 01-205-3189 . . . . . . . 2-14 01-242-8712 . . . . . . . 2-46 01-297-4107 . . . . . . . 2-52
01-186-8336 . . . . . . . 2-124 01-205-9156 . . . . . . . 2-46 01-243-9299 . . . . . . . 2-123 01-302-4478 . . . . . . . 2-174
01-187-7680 . . . . . . . 2-123 01-207-0351 . . . . . . . 2-83 01-244-4517 . . . . . . . 2-66 01-303-0980 . . . . . . . 2-99
01-187-9402 . . . . . . . 2-145 01-207-0352 . . . . . . . 2-83 01-246-3978 . . . . . . . 2-98 01-303-4701 . . . . . . . 2-67
01-188-7636 . . . . . . . 2-123 01-208-8050 . . . . . . . 2-127 01-248-3400 . . . . . . . 2-77 01-303-7765 . . . . . . . 2-137
01-188-9690 . . . . . . . 2-174 01-208-8072 . . . . . . . 2-83 01-248-5731 . . . . . . . 2-19 01-303-8180 . . . . . . . 2-97
01-189-3822 . . . . . . . 2-123 01-209-3590 . . . . . . . 2-167 01-252-5291 . . . . . . . 2-15 01-307-3780 . . . . . . . 2-117
01-190-4554 . . . . . . . 2-46 01-209-4087 . . . . . . . 2-46 01-257-9143 . . . . . . . 2-67 01-308-7462 . . . . . . . 2-114
01-190-4630 . . . . . . . 2-70 01-210-7415 . . . . . . . 2-46 01-259-3592 . . . . . . . 2-59 01-308-8259 . . . . . . . 2-77
01-190-5770 . . . . . . . 2-47 01-211-9788 . . . . . . . 2-124 01-265-0519 . . . . . . . 2-53 01-309-9505 . . . . . . . 2-77
01-190-7653 . . . . . . . 2-98 01-212-4624 . . . . . . . 2-123 01-266-2606 . . . . . . . 2-98 01-310-1656 . . . . . . . 2-78
01-190-7654 . . . . . . . 2-98 01-212-6147 . . . . . . . 2-67 01-267-6232 . . . . . . . 2-146 01-314-2429 . . . . . . . 2-77
01-190-7655 . . . . . . . 2-98 01-213-6128 . . . . . . . 2-124 01-269-6888 . . . . . . . 2-17 01-317-3915 . . . . . . . 2-142
01-190-7656 . . . . . . . 2-98 01-213-7101 . . . . . . . 2-145 01-270-7374 . . . . . . . 2-53 01-319-3357 . . . . . . . 2-7
2-226
Page Page Page Page

01-321-3192 . . . . . . . 2-67 01-338-7800 . . . . . . . 2-113 01-338-7853 . . . . . . . 2-113 01-345-0251 . . . . . . . 2-113
01-321-8599 . . . . . . . 2-67 . . . . . . . 2-114 01-338-7854 . . . . . . . 2-113 01-346-4611 . . . . . . . 2-143
01-322-8810 . . . . . . . 2-113 01-338-7804 . . . . . . . 2-113 01-338-7856 . . . . . . . 2-113 01-346-7462 . . . . . . . 2-143
01-323-1742 . . . . . . . 2-76 01-338-7805 . . . . . . . 2-113 01-338-7857 . . . . . . . 2-113 01-347-4162 . . . . . . . 2-76
01-323-5428 . . . . . . . 2-46 . . . . . . . 2-113 01-338-7858 . . . . . . . 2-113 01-347-4164 . . . . . . . 2-76
01-323-5577 . . . . . . . 2-113 01-338-7806 . . . . . . . 2-113 01-338-7860 . . . . . . . 2-113 01-348-2440 . . . . . . . 2-107
01-323-5580 . . . . . . . 2-113 01-338-7807 . . . . . . . 2-113 01-338-7861 . . . . . . . 2-113 01-348-3822 . . . . . . . 2-77
01-323-5583 . . . . . . . 2-113 01-338-7808 . . . . . . . 2-113 01-338-7862 . . . . . . . 2-113 01-349-8951 . . . . . . . 2-86
. . . . . . . 2-115 01-338-7809 . . . . . . . 2-113 01-338-7863 . . . . . . . 2-113 01-352-3132 . . . . . . . 2-105
01-324-0139 . . . . . . . 2-113 . . . . . . . 2-113 01-338-7864 . . . . . . . 2-113 01-352-4254 . . . . . . . 2-150
01-324-0143 . . . . . . . 2-115 01-338-7810 . . . . . . . 2-113 01-338-7865 . . . . . . . 2-113 01-352-9561 . . . . . . . 2-65
01-324-1053 . . . . . . . 2-113 . . . . . . . 2-113 01-338-7869 . . . . . . . 2-113 01-352-9593 . . . . . . . 2-67
01-324-1054 . . . . . . . 2-113 01-338-7811 . . . . . . . 2-113 01-338-7870 . . . . . . . 2-113 01-354-2531 . . . . . . . 2-105
01-324-1055 . . . . . . . 2-113 01-338-7812 . . . . . . . 2-113 01-338-7872 . . . . . . . 2-113 01-354-7733 . . . . . . . 2-105
01-324-1056 . . . . . . . 2-113 01-338-7813 . . . . . . . 2-113 01-338-7873 . . . . . . . 2-113 01-355-3686 . . . . . . . 2-105
01-324-1057 . . . . . . . 2-113 01-338-7816 . . . . . . . 2-113 01-338-7878 . . . . . . . 2-113 01-355-5505 . . . . . . . 2-22
01-324-1058 . . . . . . . 2-113 01-338-7817 . . . . . . . 2-113 01-338-7881 . . . . . . . 2-113 01-356-8411 . . . . . . . 2-17
01-324-1059 . . . . . . . 2-113 . . . . . . . 2-113 . . . . . . . 2-113 01-357-4178 . . . . . . . 2-10
01-324-2633 . . . . . . . 2-115 01-338-7818 . . . . . . . 2-113 01-338-7885 . . . . . . . 2-113 01-358-1594 . . . . . . . 2-174
01-324-2634 . . . . . . . 2-113 . . . . . . . 2-113 . . . . . . . 2-113 01-359-1451 . . . . . . . 2-75
01-324-4208 . . . . . . . 2-113 01-338-7819 . . . . . . . 2-112 01-338-7887 . . . . . . . 2-113 01-359-1535 . . . . . . . 2-117
01-324-4210 . . . . . . . 2-113 . . . . . . . 2-113 01-338-7888 . . . . . . . 2-113 01-363-0621 . . . . . . . 2-101
01-324-6749 . . . . . . . 2-113 . . . . . . . 2-113 . . . . . . . 2-114 . . . . . . . 2-114
01-324-8886 . . . . . . . 2-113 . . . . . . . 2-114 01-338-7889 . . . . . . . 2-113 01-365-9402 . . . . . . . 2-67
01-324-9542 . . . . . . . 2-113 01-338-7820 . . . . . . . 2-113 01-338-7890 . . . . . . . 2-113 01-366-9976 . . . . . . . 2-173
01-326-4348 . . . . . . . 2-113 01-338-7822 . . . . . . . 2-113 01-338-7896 . . . . . . . 2-113 01-367-6435 . . . . . . . 2-77
. . . . . . . 2-113 01-338-7823 . . . . . . . 2-113 . . . . . . . 2-113 01-369-0768 . . . . . . . 2-36
01-335-1611 . . . . . . . 2-9 01-338-7824 . . . . . . . 2-113 . . . . . . . 2-113 01-369-5701 . . . . . . . 2-65
01-335-1612 . . . . . . . 2-9 . . . . . . . 2-113 01-338-7898 . . . . . . . 2-113 01-369-5750 . . . . . . . 2-85
01-335-1614 . . . . . . . 2-9 . . . . . . . 2-115 . . . . . . . 2-113 01-371-3262 . . . . . . . 2-183
01-335-1616 . . . . . . . 2-5 01-338-7825 . . . . . . . 2-113 01-338-7900 . . . . . . . 2-113 01-371-3263 . . . . . . . 2-183
01-338-4223 . . . . . . . 2-115 . . . . . . . 2-114 . . . . . . . 2-113 01-371-3264 . . . . . . . 2-183
01-338-7774 . . . . . . . 2-113 01-338-7826 . . . . . . . 2-113 01-338-7901 . . . . . . . 2-113 01-371-3265 . . . . . . . 2-183
01-338-7778 . . . . . . . 2-113 01-338-7827 . . . . . . . 2-113 01-338-7910 . . . . . . . 2-113 01-371-3266 . . . . . . . 2-183
01-338-7779 . . . . . . . 2-113 01-338-7828 . . . . . . . 2-113 01-338-7911 . . . . . . . 2-113 01-371-7937 . . . . . . . 2-12
01-338-7780 . . . . . . . 2-113 . . . . . . . 2-113 01-338-7913 . . . . . . . 2-113 01-371-7938 . . . . . . . 2-12
. . . . . . . 2-113 01-338-7829 . . . . . . . 2-113 01-338-7914 . . . . . . . 2-113 01-371-7939 . . . . . . . 2-12
01-338-7782 . . . . . . . 2-113 01-338-7830 . . . . . . . 2-114 . . . . . . . 2-113 01-371-7940 . . . . . . . 2-12
01-338-7783 . . . . . . . 2-113 01-338-7831 . . . . . . . 2-113 01-338-7916 . . . . . . . 2-113 01-371-7941 . . . . . . . 2-12
. . . . . . . 2-114 01-338-7832 . . . . . . . 2-113 01-338-7922 . . . . . . . 2-113 01-371-7943 . . . . . . . 2-12
01-338-7784 . . . . . . . 2-113 01-338-7833 . . . . . . . 2-114 01-338-7924 . . . . . . . 2-113 01-371-8458 . . . . . . . 2-12
01-338-7785 . . . . . . . 2-113 01-338-7835 . . . . . . . 2-112 01-338-7926 . . . . . . . 2-113 01-371-8459 . . . . . . . 2-12
01-338-7786 . . . . . . . 2-113 . . . . . . . 2-113 01-338-7928 . . . . . . . 2-113 01-371-8460 . . . . . . . 2-12
01-338-7787 . . . . . . . 2-113 01-338-7836 . . . . . . . 2-113 01-338-7929 . . . . . . . 2-113 01-371-8461 . . . . . . . 2-12
01-338-7789 . . . . . . . 2-113 . . . . . . . 2-113 01-338-7930 . . . . . . . 2-113 01-371-8464 . . . . . . . 2-12
01-338-7791 . . . . . . . 2-113 01-338-7837 . . . . . . . 2-113 01-338-7933 . . . . . . . 2-113 01-371-8467 . . . . . . . 2-12
01-338-7792 . . . . . . . 2-113 01-338-7840 . . . . . . . 2-113 01-340-6221 . . . . . . . 2-144 01-372-0337 . . . . . . . 2-45
01-338-7793 . . . . . . . 2-113 01-338-7848 . . . . . . . 2-113 01-343-2918 . . . . . . . 2-76 01-372-0338 . . . . . . . 2-45
01-338-7794 . . . . . . . 2-113 01-338-7849 . . . . . . . 2-113 01-343-3590 . . . . . . . 2-66 01-372-0788 . . . . . . . 2-12
. . . . . . . 2-113 . . . . . . . 2-113 01-343-8540 . . . . . . . 2-116 01-372-2309 . . . . . . . 2-45
01-338-7797 . . . . . . . 2-113 01-338-7851 . . . . . . . 2-113 01-343-8543 . . . . . . . 2-116 01-372-2311 . . . . . . . 2-15
01-338-7798 . . . . . . . 2-113 . . . . . . . 2-113 01-344-1046 . . . . . . . 2-116 01-372-2666 . . . . . . . 2-57
01-338-7799 . . . . . . . 2-113 01-338-7852 . . . . . . . 2-113 01-345-0250 . . . . . . . 2-113 01-372-2667 . . . . . . . 2-57
2-227
Page Page Page Page

01-372-2669 . . . . . . . 2-57 01-385-5842 . . . . . . . 2-61 01-390-5251 . . . . . . . 2-117 01-422-7298 . . . . . . . 2-12
01-372-2670 . . . . . . . 2-57 01-386-5379 . . . . . . . 2-131 01-391-0351 . . . . . . . 2-40 01-422-7307 . . . . . . . 2-12
01-372-2672 . . . . . . . 2-57 01-386-8248 . . . . . . . 2-112 01-391-2360 . . . . . . . 2-55 01-422-7444 . . . . . . . 2-12
01-372-2673 . . . . . . . 2-57 01-387-0382 . . . . . . . 2-112 01-391-2361 . . . . . . . 2-55 01-422-7467 . . . . . . . 2-12
01-372-3539 . . . . . . . 2-15 01-387-0504 . . . . . . . 2-114 01-391-4407 . . . . . . . 2-112 01-422-7937 . . . . . . . 2-12
01-372-3542 . . . . . . . 2-12 01-387-0525 . . . . . . . 2-66 01-391-7504 . . . . . . . 2-66 01-422-8601 . . . . . . . 2-12
01-372-3543 . . . . . . . 2-12 01-387-1966 . . . . . . . 2-112 01-391-9230 . . . . . . . 2-116 01-422-9259 . . . . . . . 2-12
01-372-3544 . . . . . . . 2-12 01-387-1972 . . . . . . . 2-112 01-391-9841 . . . . . . . 2-61 01-422-9270 . . . . . . . 2-12
01-372-3545 . . . . . . . 2-12 01-387-1973 . . . . . . . 2-114 01-391-9887 . . . . . . . 2-61 01-422-9312 . . . . . . . 2-12
01-372-3940 . . . . . . . 2-57 01-387-1977 . . . . . . . 2-112 01-392-2760 . . . . . . . 2-105 01-422-9361 . . . . . . . 2-12
01-372-4706 . . . . . . . 2-45 01-387-8947 . . . . . . . 2-111 01-392-3352 . . . . . . . 2-116 01-422-9602 . . . . . . . 2-12
01-374-3315 . . . . . . . 2-104 01-388-1003 . . . . . . . 2-117 01-392-5158 . . . . . . . 2-114 01-422-9929 . . . . . . . 2-12
01-374-4524 . . . . . . . 2-102 01-388-2135 . . . . . . . 2-113 01-392-7567 . . . . . . . 2-112 01-423-0132 . . . . . . . 2-12
01-374-5970 . . . . . . . 2-113 01-388-2419 . . . . . . . 2-114 01-394-3480 . . . . . . . 2-115 01-423-1089 . . . . . . . 2-12
01-375-2169 . . . . . . . 2-114 01-388-2843 . . . . . . . 2-110 01-394-7980 . . . . . . . 2-112 01-423-1329 . . . . . . . 2-12
01-375-2901 . . . . . . . 2-105 01-388-3070 . . . . . . . 2-115 01-394-9346 . . . . . . . 2-112 01-423-1747 . . . . . . . 2-67
01-376-0811 . . . . . . . 2-116 01-388-4609 . . . . . . . 2-111 . . . . . . . 2-115 . . . . . . . 2-67
01-376-0812 . . . . . . . 2-116 01-388-8456 . . . . . . . 2-117 01-394-9926 . . . . . . . 2-114 01-423-4729 . . . . . . . 2-12
01-377-2618 . . . . . . . 2-83 01-388-8573 . . . . . . . 2-55 01-395-1562 . . . . . . . 2-107 01-423-4732 . . . . . . . 2-12
01-377-9787 . . . . . . . 2-112 01-388-8835 . . . . . . . 2-113 01-395-9580 . . . . . . . 2-115 01-423-4735 . . . . . . . 2-12
01-377-9853 . . . . . . . 2-104 01-389-6008 . . . . . . . 2-61 01-396-1328 . . . . . . . 2-101 01-423-5039 . . . . . . . 2-12
01-378-2896 . . . . . . . 2-112 01-389-6953 . . . . . . . 2-66 01-398-2189 . . . . . . . 2-61 01-423-5041 . . . . . . . 2-12
01-378-2936 . . . . . . . 2-112 01-389-6960 . . . . . . . 2-70 01-398-4223 . . . . . . . 2-112 01-423-9274 . . . . . . . 2-28
01-378-3046 . . . . . . . 2-112 01-389-6965 . . . . . . . 2-66 01-398-9599 . . . . . . . 2-28 01-424-1352 . . . . . . . 2-28
01-378-3092 . . . . . . . 2-112 01-389-6972 . . . . . . . 2-69 01-399-6586 . . . . . . . 2-12 01-424-1353 . . . . . . . 2-28
01-378-3938 . . . . . . . 2-112 01-389-6984 . . . . . . . 2-69 01-399-8492 . . . . . . . 2-117 01-424-3571 . . . . . . . 2-27
01-378-3951 . . . . . . . 2-112 01-389-6996 . . . . . . . 2-61 01-406-7433 . . . . . . . 2-28 01-424-3572 . . . . . . . 2-27
01-378-4005 . . . . . . . 2-112 01-389-7002 . . . . . . . 2-69 01-406-7434 . . . . . . . 2-28 01-424-5713 . . . . . . . 2-40
01-378-4172 . . . . . . . 2-112 01-389-7006 . . . . . . . 2-66 01-406-7435 . . . . . . . 2-28 01-424-6553 . . . . . . . 2-15
01-378-4308 . . . . . . . 2-112 01-389-7014 . . . . . . . 2-66 01-407-5431 . . . . . . . 2-27 01-424-6787 . . . . . . . 2-113
01-378-8797 . . . . . . . 2-112 01-389-7015 . . . . . . . 2-69 01-408-6846 . . . . . . . 2-112 01-424-7039 . . . . . . . 2-115
01-379-5133 . . . . . . . 2-173 01-389-7623 . . . . . . . 2-70 01-410-7157 . . . . . . . 2-116 01-426-1285 . . . . . . . 2-27
01-379-9702 . . . . . . . 2-112 01-389-7637 . . . . . . . 2-66 01-410-7171 . . . . . . . 2-115 01-429-2038 . . . . . . . 2-56
01-379-9724 . . . . . . . 2-112 01-389-7639 . . . . . . . 2-70 01-411-4512 . . . . . . . 2-67 01-430-8843 . . . . . . . 2-65
01-379-9754 . . . . . . . 2-112 01-389-7640 . . . . . . . 2-69 01-411-4532 . . . . . . . 2-112 01-431-7627 . . . . . . . 2-114
01-380-0797 . . . . . . . 2-114 01-389-7642 . . . . . . . 2-57 . . . . . . . 2-112 01-434-1473 . . . . . . . 2-114
01-380-7327 . . . . . . . 2-112 01-389-7976 . . . . . . . 2-66 01-411-7108 . . . . . . . 2-112 01-434-1717 . . . . . . . 2-112
01-380-9500 . . . . . . . 2-113 01-389-7982 . . . . . . . 2-57 01-412-1421 . . . . . . . 2-112 01-434-9440 . . . . . . . 2-1
01-381-0036 . . . . . . . 2-115 01-389-7988 . . . . . . . 2-66 01-413-3907 . . . . . . . 2-112 01-435-0934 . . . . . . . 2-28
01-381-5707 . . . . . . . 2-112 01-389-7992 . . . . . . . 2-61 01-415-7775 . . . . . . . 2-116 01-435-0936 . . . . . . . 2-28
01-381-5724 . . . . . . . 2-112 01-389-8001 . . . . . . . 2-57 01-416-5474 . . . . . . . 2-59 01-435-1743 . . . . . . . 2-28
01-381-9509 . . . . . . . 2-112 01-389-8002 . . . . . . . 2-61 01-416-9490 . . . . . . . 2-114 01-435-1744 . . . . . . . 2-28
01-382-0097 . . . . . . . 2-112 01-389-8012 . . . . . . . 2-12 01-417-7829 . . . . . . . 2-40 01-435-1745 . . . . . . . 2-28
01-382-7075 . . . . . . . 2-114 01-389-8015 . . . . . . . 2-11 01-418-6198 . . . . . . . 2-112 01-435-4549 . . . . . . . 2-110
01-382-8218 . . . . . . . 2-66 01-389-8016 . . . . . . . 2-12 01-419-4344 . . . . . . . 2-28 01-435-6804 . . . . . . . 2-1
01-383-0100 . . . . . . . 2-114 01-389-8021 . . . . . . . 2-66 01-419-7788 . . . . . . . 2-103 01-436-3717 . . . . . . . 2-77
01-383-8033 . . . . . . . 2-105 01-389-8028 . . . . . . . 2-12 01-420-7626 . . . . . . . 2-69 01-437-7085 . . . . . . . 2-28
. . . . . . . 2-105 01-389-8031 . . . . . . . 2-45 01-422-0758 . . . . . . . 2-67 01-438-0519 . . . . . . . 2-114
01-384-4230 . . . . . . . 2-66 01-389-8035 . . . . . . . 2-66 01-422-4476 . . . . . . . 2-69 01-438-5913 . . . . . . . 2-109
01-384-5385 . . . . . . . 2-66 01-389-8038 . . . . . . . 2-69 01-422-6116 . . . . . . . 2-12 01-440-8565 . . . . . . . 2-112
01-384-7504 . . . . . . . 2-112 01-389-8039 . . . . . . . 2-45 01-422-6121 . . . . . . . 2-12 . . . . . . . 2-112
01-385-2665 . . . . . . . 2-69 01-389-8753 . . . . . . . 2-15 01-422-6463 . . . . . . . 2-12 01-442-1183 . . . . . . . 2-104
01-385-3803 . . . . . . . 2-61 01-390-4329 . . . . . . . 2-112 01-422-6589 . . . . . . . 2-12 01-442-3326 . . . . . . . 2-112
2-228
Page Page Page Page

. . . . . . . 2-112 01-453-7592 . . . . . . . 2-74 01-478-3395 . . . . . . . 2-115 99-100-6050 . . . . . . . 2-60
01-448-9215 . . . . . . . 2-74 01-466-2419 . . . . . . . 2-102 02-324-0139 . . . . . . . 2-113 99-454-0560 . . . . . . . 2-58
2-229
2-230
Please take a minute to provide feedback regarding this catalog.
Your comments are important and help to provide a quality product for you.
(Upon completion, tear off the card at the perfs, fold in half, seal with tape and mail.)
DLIS QUALITY FEEDBACK CARD (CATALOG)

DLIS Account No. Submission Date
Product Name/Number/Edition/Date Page/Ref/Ident/Etc.
Component Name: Phone (DSN or Comm):

Air Force Organization:
Navy
DoD Address:
Coast Guard
Army City/State/Zip:
Marines
Civilian Requisition/Voucher No. Distribution Rating
Other Product Rating Poor (1) Excellent (10)
Would you like to see the existing three sections of the Afloat Shopping Guide (ASG) merged into one
book? YES NO
Quality Problem
Received wrong catalog Catalogs received late Incorrect position

Received incorrect quantities Border info incorrect Obscure/missing data
Received in poor condition Height/depth incorrect Inconsistent data
Description of Quality Problem(s):
Comments:
.
CUSTOMER ASSISTANCE: 1-888-352-9333
FOR DLIS USE ONLY
or DSN 932-4725
Control Number Received By/Date Reply Date This card does not replace existing procedures
for submitting requisitions or
requesting automatic distribution.
---- ----
Fold Here Fold Here
Seal With Tape Only

P r o duced by:
DLI S
ELECTRONIC DOCUMENTS/PRODUCTS BRANCH
DEFENSE LOGISTICS INFORMATION SERVICE
74 WASHINGTON AVENUE NORTH, SUITE 7
BATTLE CREEK MI 49017-3084
Te lephone: DSN 932-4690 FAX: DSN 9 32-4983

Co mmercial (269 ) 961-4690 Co m m ercial: (2 6 9 ) 9 61-4983

Afloat 2

Uploaded by

Copyright:

Available Formats

Afloat 2

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Afloat 2

Uploaded by

Copyright:

Available Formats

What is the purpose of the Afloat Shopping Guide?

What is the purpose of the Afloat Shopping Guide?

What information is included in the Index of Federal Supply Groups and Classes?

What information is included in the Index of Federal Supply Groups and Classes?

AUG 2003

SUPPLY MANAGEMENT DATA

FSC 5306 BOLTS ....................................................................................... 2-39

FSC 5307 STUDS ...................................................................................... 2-51

FSC 5310 NUTS and WASHERS .................................................................... 2-55

FSC 5315 NAILS, MACHINE KEYS and PINS ..................................................... 2-73

FSC 5320 RIVETS...................................................................................... 2-83

FSC 5325 FASTENING DEVICES ................................................................... 2-89

FSC 5330 PACKING and GASKET MATERIALS .................................................. 2-101

FSC 5340 HARDWARE, COMMERCIAL............................................................ 2-133

FSC 5345 DISKS and STONES, ABRASIVE ....................................................... 2-149

FSC 5350 ABRASIVE MATERIALS .................................................................. 2-151

FSC 5355 KNOBS and POINTERS .................................................................. 2-153

FSC 5365 BUSHINGS, RINGS, SHIMS, and SPACERS ......................................... 2-165

FSC 5530 PLYWOOD and VENEER................................................................. 2-179

FSC 5680 MISCELLANEOUS CONSTRUCTION MATERIALS ................................. 2-185

Each Section is in numeric order beginning with

In cl u de your U nit I dentification C ode (UIC ), point of contact, phone

Defense Logistics Information Service

For Inquires contact:

Defense Logistics Information Service

Dumping plastic at sea is harmful to the marine environment.

Plastic washes up near shores and on beaches, posing a litter problem.

Floating plastic can be a navigation hazard.

What is being done about the problem from a supply standpoint?

What can you do?

Together, we can make a difference in saving our marine environment.

NSN or Part Number

Manufacturer (or CAGE Code)

NSN or Part Number

Manufacturer ( or CAGE Code)

DEPARTMENT OF THE NAVY

Naval Ships Technical Manual 0901-LP-075-0000 (S9086-CJ-

Defense Supply Center Richmond (DSCR) ..................................................... Phone (804) 279-4865

Defense Supply Center Philadelphia(DSCP) .................................................. Phone (215) 737-2336

Defense Personnel Support Center (DPSC) ................................................... Phone (800) 413-6789

General Products Commodity Center ............................................................ Phone (817) 978-2051

USA Tank Automotive (TACOM) ..................................................................... Phone (810) 574-6245

National Furniture Center ............................................................................... Phone (703) 305-7003

GSA National Customer Service Center ......................................................... Phone (800) 488-3111

Naval Surface Warfare Center (NSWCCD-SSES)

A MICROMETER, TUBE ................................... 2-2

DISK, GAP SETTING.............................................. 2-4

INSULATION SLEEVING, THERMAL ................... 2-183 NUT,

MAGNETIC STRIP .............................................. 2-142 P

SNAP, HOOK ...................................................... 2-145 TRAMMEL HEADS.............................................. 2-10

BALL ATTACHMENT, 01-010-4522 CALIPER SET, MICROMETER,

BLADE, THICKNESS GAGE

00-132-5693 CALIPER, LEAD BENDER

Range/In. CALIPER, VERNIER Solid nut adjustment.

Split nut adjustment.

Flat rule with non-graduated base.

Range/In. GAGE, DRILL POINT

2-1/2 in. base

GAGE SET, SMALL HOLE