Scenario1:

Calculate the TAX for each employee who belongs to the sales department if sal
is greater than 5000 then calculate the tax as sal*0.17 else calculate the TAX as
SAL*0.13

Note: Sales Department identified with deptno=30

Source:

Target:

Logic: use filter stage to filter the rows where deptno=30 and create a new
column in Transformer ie.TAX and write the derivation which is given below

TAX=If DSLink5.SAL >5000 Then DSLink5.SAL * 0.17 Else DSLink5.SAL*0.13

Job Design:
Scenario2:

Calculate the total salary for each employee based on SAL&COMM(Comm col
may have Nulls)

Source:

Target:

Logic: Create a new column in Transformer ie.Totalsal and write the derivation
which is given below

If IsNull(DSLink4.COMM) Then DSLink4.SAL Else DSLink4.SAL + DSLink4.COMM

Job Design:
Scenario3:

Create a job using filter stage to load the data which is having job as analyst

Source:

Target:

Logic: In filter stage write the where condition JOB='ANALYST'

Job Design:

Scenario4:

Calculate the TAX,HRA,ANNUALSAL based on Total salary the total salary

calculated based on SAL&COMM
TOTSAL=SAL+COMM(Comm col may have nulls)

If(is null(comm,sal,sal+comm)

If totalsal greater than 8000 then calculate the tax as TOTSAL*0.25 ELSE
Calculate the TAX as TOTSAL*0.15

Calculate the HRA as follows TOTSAL*0.18

Calculate the ANNUALSAL as follows TOTSAL*12

Source:

Target:

Logic:

Create a Stage variable in transformer TOTSAL and do the derivation which is

given below

TOTSAL=If IsNull(DSLink4.COMM) Then DSLink4.SAL Else DSLink4.SAL +

DSLink4.COMM

Create three new columns with Names TAX,HRA,ANNSAL and write the derivation
for each column which is given below
TAX=If TOTSAL> 8000Then TOTSAL*0.25 Else TOTSAL*0.15

HRA=TOTSAL*0.18

ANNSAL=TOTSAL*12

Job Design:

Scenario5:

Scenario1. Cummilative Sum:

Source:

Target:
Job Design

Logic:

Create stage variable VCUMMSUM and assign initial value=0

VCUMMSUM=VCUMMSUM + DSLink3.SAL

Scenario6:

Each Department wise Highest and Lowest Salary required

Source:
Target:

SQL query:

Select deptno, min_max from (

Select deptno,min(sal) min_max from emp group by deptno

Union

Select deptno,max(sal) min_max from emp group by deptno)

Second query:

select deptno,min(sal) min_max from emp where deptno=10 group by

deptno

union

select deptno,max(sal) min_max from emp where deptno=10 group by

deptno

union

select deptno,min(sal) min_max from emp where deptno=20 group by

deptno

union
select deptno,max(sal) min_max from emp where deptno=20 group by
deptno

union

select deptno,min(sal) min_max from emp where deptno=30 group by

deptno

union

select deptno,max(sal) min_max from emp where deptno=30 group by

deptno

Job Design:

Scenario7:

Calculate the GROSS SAL for each employee based on TOTSAL,HRA,TAX

GROSS SAL=TOTSAL+HRA-TAX

TOTSAL=SAL+COMM

Comm my have nulls

HRA=SAL*0.18

TAX=SAL*0.17

Source:

Target

Logic:

Create a Three Stage variable in transformer TOTSAL ,TAX,HRA and do the

derivation which is given below

TOTSAL=If IsNull(DSLink4.COMM) Then DSLink4.SAL Else DSLink4.SAL +

DSLink4.COMM

TAX=DSLink4.SAL*0.17

HRA=DSLink4.SAL*0.18

And Create three new columns in transformer TAX,HRA,GROSSSAL

TAX=TAX

HRA=HRA

GROSSSAL=TOTSAL + HRA- TAX

Scenario8:

Converting Rows into Columns without using pivot:

Source:

Target:
Job Design:

Job Logic:

In Transformer Change the Field Name MONTH1 to MONTH Similary for

MONTH2,MONTH3

And copy Three Transformer output to Funnel

Scenario9:

Fetch First and Last record from a file

Source:

Target:

Job Design:

Job Logic: Take one record from head and take one record from Tail and
club these two at target
Scenario 10

How to send first half record to target

Source:

Target:

JOB:

Job Logic:In source DB write the query given below

select * from emp where rownum <= ( select count(*)/2 from emp)

Scenario 11:

How to send second half record to target:

Source:

Target:

Job Design:

Job Logic:

in source DB write the query given below

Select * from emp minus Select * from emp where rownum <= ( select
count(*)/2 from emp)

Scenario 12:

How to send Even record in to one target &Odd records in to another

target:
Source:

Target:

Even:

Odd:

Job Design

JobLogic:
Create Stage variable with name Flag and enter following derivation

If Mod(DSLink2.EMPNO,2)=0 Then "EVEN" ELSE "ODD"=FLAG

And in Transformer Constraints Even link apply the condition FLAG="EVEN" Similarly
for Odd constraint apply the condition FLAG="ODD"

Scenario13:

Scenario 9: In Emp table there are three departments (dept no 30,20,10).

Separate the record to different target department wise.

Source:

Target1:

Target2:

Target3:

Job Design:
Job Logic:

In transformer constraint apply the below conditions

Scenario6:

Create a job that can load employees who employee no is EVEN

Scenario7:

Create a job that can load employees who employee no is ODD

Scenario8:

Design a job that can load employees whose employee name start with S or J

Scenario9:

Design a job that can generate sequence no

Scenario10:

Design a job that can load alternative records in to target

Scenario11:

Design a job that can load load 5th and 8th record into atarget
Scenario12:

Source:

Custid Cust_Name Gender

7369 SUBHA 0
7499 SURESH 1
7566 JAME SMEENA 2

Target:

Custid Cust_Name Gender

7369 SUBHA F
7499 SURESH M
7566 JAME SMEENA UNK

Scenario13:

Source

Cust_FNa
Custid me Cust_LName City
7001 BILL CLINTON HYD
7002 NARA LOKESH BANG
7003 SONIA GANDHI DELHI
7004 VENKAT RAVI VIZAG

Target:

Custid Cust_Name City

7001 BILL CLINTON HYD
7002 NARA LOKESH BANG
SONIA
7003 GANDHI DELHI
7004 VENKAT RAVI VIZAG

Scenario14:
Source:

Cust_FNa
Custid me Email
7001 VENKAT [email protected]
7002 SUJANA [email protected]
[email protected]
7003 KRSIHNA M

Target:

Cust_FNa
Custid me Email Username
7001 VENKAT [email protected] VENKAT
7002 SUJANA [email protected] SUJANA
[email protected]
7003 KRSIHNA M KRISHNA

Scenario15:

Source:

Custid Cust_Name
7001 VENKAT RAVI
7002 SRIDHAR REDDY
7003 SOBHA RANI

Target:

Custid Cust_FName Cust_LName

7001 VENKAT RAVI
7002 SRIDHAR REDDY
7003 SOBHA RANI

Scenario16:

Source:

Custid Cust_Name
VENKAT RAVI
7001 KUMAR
RAVI RAJA
7002 PINISETTI

Target:

Cust_MNa
Custid Cust_FName Cust_MName me
7001 VENKAT RAVI KUMAR
7002 RAVI RAJA PINISETTI

Scenario17:

Source:

EMPID PHONE
7369 9948047694
7370 9912395605
7371 8600097130

Target:

EMPID PHONE
7369 (994)-80-476-94
7370 (991)-23-956-05
7371 (860)-00-971-30

Scenario18:

There are three target tables with name T1,T2,T3 emp name start with S pass
to T1 AND emp name start with J pass to T2 AND others pass to T3

Scenario19:

There are twotarget tables with name T1,T2 and 2 nd record pass to T1 AND 8 th
record pass to T2

Scenario20:

There are two target tables with name T1,T2 And alternative records pass to
T1 AND Others pass to T2

Scenario21:

sourcedata

Colum
n
10
10
10
20
20
20
30
30

Targetdata:

Colum Colum
n1 n2
10 1
10 1
10 1
20 2
20 2
20 2
30 3
30 3

Scenario22:

sourcedata

Colum
n
10
10
10
20
20
20
30
30

Targetdata:

Colum Colum
n1 n2
10 1
10 2
10 3
20 1
20 2
20 3
30 1
30 2

Scenario23:

sourcedata

Colum
n
10
10
10
20
20
20
30
30

Target data:

Colum Colum
n1 n2
10 1
10 2
10 3
20 4
20 5
20 6
30 7
30 8

Scenario23:

Source data:

Colum
n
10
10
10
20
20
20
30
30

Target data(T1)

Colum
n1
10
20
30

Target data(T2)

Colum
n2
10
10
20
20
30

Scenario24:

There are two sources with Name S1&S2 and S1 Having 5 fields and S2 haing 3
fields there is no common column

Scenario25:

Sourcedata

Empid Sal
1 1000
2 2000
3 3000
4 5000

Target data:

Empid Sal Salary_Sum

1 1000 11000
2 2000 11000
3 3000 11000
4 5000 11000

Scenario26:

Calculate the amount of salary paying for each department

Scenario27:

If source contains N-rows Load N+5 Rows into the target

Scenario28:

If source contains N-rows where N=EVEN Load First half records into the target

Query: Select * from emp where rownum<=(select count(*)/2 from emp)

Scenario29:

If source contains N-rows where N=EVEN Load Second half records into the
target

Query: Select * from emp

Minus

Select * from emp where rownum<=(select count(*)/2 from emp)

Scenario30:

Sourcedata

Empid Sal
1 1000
2 2000
3 3000
4 5000

Target data:

Empid Sal Salary_Sum

1 1000 1000
2 2000 3000
3 3000 6000
4 5000 11000