DecisionSpace

Geosciences
10ep.3.03 Release
Beta
Release Notes
Contents
Whats In This Release ............................................................................................................. 2
Introduction ............................................................................................................................... 4
Software Requirements ............................................................................................................ 5
Installation Instructions ........................................................................................................... 8
DecisionSpace Montage Software ........................................................................................ 9
Plotter Support ........................................................................................................................ 10
Launching DecisionSpace Geosciences 10ep.3.03 .......................................................... 11
Getting Started ........................................................................................................................ 13
International Trade Compliance ............................................................................................ 16
Enhancements and New Functionality in 10ep.3 ................................................................. 18
Enhancements and New Functionality in 10ep.2 ................................................................. 28
Enhancements and New Functionality in 10ep.1 ................................................................. 37
Fixed Issues in 10ep.3.03 ....................................................................................................... 49
Fixed Issues in Previous 10ep Releases .............................................................................. 53
Known Issues .......................................................................................................................... 95
Third-Party Applications ...................................................................................................... 109
Contacting Landmark Customer Support .......................................................................... 128

10ep.3.03 Release Notes Page 1 of 131 March 2017

1703131109.221811
 DecisionSpace Geosciences 10ep.3.03 Release Notes

Whats In This Release

DecisionSpace Geosciences 10ep.3.03
The DecisionSpace Geosciences 10ep.3.03 patch addresses defects that have been fixed from
previous releases. The DecisionSpace Geosciences 10ep.3 point release includes new features
(listed below) while addressing performance improvements and defects from previous releases.

Beginning with DecisionSpace Geosciences 10ep.1, the interface was reorganized to present
the material you need when you need it. A video has been created on many of the changes in the
interface. You can access this video from the Welcome Page using the Getting Started video
button. See a list of user interface changes under DecisionSpace Base enhancements.

This DecisionSpace release uses OpenWorks 5000.10.5.0 or later. The installation on either
Windows or Linux platform includes the following enhancements that became available with the
DecisionSpace Geosciences 10ep.3 point release:

General Usability and Performance (includes GIS)

DecisionSpace Earth Modeling
Dynamic Frameworks to Fill
DecisionSpace Geology, including:
Horizontal Well Correlation (Geosteering)
Structural Modeling
Wellbore Analyzer
Zone Manager
DecisionSpace Geophysics, including:
Seismic Analysis
Seismic Attribute Generation
Velocity Modeling
Property Modeling
Volume Visualization
DecisionSpace Log Calculator
DecisionSpace Microseismic
DecisionSpace Natural Fracture Network
DecisionSpace Well Planning
Fixed Issues in 10ep.3.03, followed by Fixed Issues in previous releases (see below)
Known Issues

10ep.3.03 Release Notes Page 2 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

These release notes also contain the following:

Fixed Issues in 10ep.3.02

Fixed Issues in 10ep.3.01

Fixed Issues in 10ep.3

Fixed Issues in 10ep.2.02

Fixed Issues in 10ep.2.01

Fixed Issues in 10ep.2

Fixed Issues in 10ep.1.01

Fixed Issues in 10ep.1

DecisionSpace SDK
Customers and third-parties can create custom plug-ins for DecisionSpace 10ep.3.03 software using the
DecisionSpace 10ep.3 SDK. See the DecisionSpace 10ep.3 SDK Developer Guide for detailed
instructions. (The DecisionSpace 10ep.3 SDK is a separate purchase and is not included in the
DecisionSpace software installations.)
Note: 5000.8.x versions of plug-ins need to be recompiled with the DecisionSpace 10ep.3 SDK to run in
the DecisionSpace Geosciences 10ep.3.03 software. See the DecisionSpace 10ep.3 SDK Developer
Guide for detailed instructions.

10ep.3.03 Release Notes Page 3 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Introduction
This document contains information pertinent to this DecisionSpace Geosciences release.
Reading this document prior to using the software will assist you in attaining maximum
performance from the application. These release notes provide information specific to the
DecisionSpace Geosciences software, including known issues.

Windows 7 Foreign Language Issues

DecisionSpace can fail with some non-US English language system settings. See the
Installation Guide for more information.

Check for updated versions of the Release Notes and Installation Guide

The DecisionSpace Geosciences 10ep.3.03 Release Notes and the DecisionSpace

Geosciences 10ep.3.01 Release Installation Guide can be downloaded from the Landmark
Software Manager. The Software Manager may contain more recent versions of these
documents than accessed from the Installer or from the Online Help menu. To determine
whether a more recent version is available, compare the date at the bottom of the pages of
these documents with the pdfs in Landmark Software Manager. If you receive an error
message when accessing this site, contact your customer representative.

Refer to the DecisionSpace Geosciences 10ep.3.01 Release Installation Guide for the
following:

System requirements
Supported configurations
Installation procedures
Post-installation procedures
Troubleshooting the installation

To download Landmark Software: http://esd.halliburton.com

OpenWorks AQ Connections

In response to OpenWorks connection overloads, the OpenWorks Development Kit now

shares a single AQ connection across all the OpenWorks sessions for a user.

For Impetus, please see the Release Notes for each of its separate pieces of software. It can be
retrieved from the Landmark Software Manager.

Help Note: The structure of the Help Contents has been improved: If you have a specific topic you
want to find in Help, use the Search feature to find the page you need.

10ep.3.03 Release Notes Page 4 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Software Requirements
Complete system requirements, software and hardware, are contained in the DecisionSpace
Geosciences 10ep.3.01 Release Installation Guide. Following is the list of software that must be
installed and working before the DecisionSpace version is installed:

Oracle Database - either a local instance or a network solution

OpenWorks - included in the DecisionSpace installer

Special Note: ZEH Plotting Solutions Patch 5.1.0.1

If you are sending CGM files to a ZEH Plot Server, the ZEH Plotting Solutions Patch 5.1.0.1 is
required. This patch includes enhancements to the ZEH CGM interpreter and rasterizers to
support CGM files coming out of the 5000.8.3 version of DecisionSpace Suite software.
Improvements include support for alpha transparency in seismic data; support for files with many
protective clip regions; improvements to triangular gradient fills; and elimination of gaps between
seismic PIP panels.

The patch includes an updated CGM interpreter (zcgmio.exe); updated bitmap rasterizers
(rsbt.exe and rsbm.exe); and an updated continuous tone rasterizer (rcop.exe). Please refer to
each release note included in the plotting solutions patch delivery for a full list of changes.

Installer Path (URL) on Windows

For Windows environments, please make sure the directory path where the DecisionSpace
Installer is downloaded does not contain special characters such as # or parenthesis. If there are
special characters, the installer will not behave correctly and DecisionSpace will not install
correctly.

Remote Graphics Display

Landmark recommends using the latest version of HP Remote Graphics Software to remotely
display our applications. It is important that the version of RGS Sender and RGS Receiver are the
same (even if the latest version is not installed). Additionally, ensure the following settings are
applied.

1. From the HP Remote Graphics Software main dialog box, click the Settings icon (it looks like
a gear).

2. Use the following settings:

In the Connection tab, uncheck Enable Remote USB.

In the Performance tab, uncheck both Enable HP Velocity and Increase text rendering
quality.

In the Audio tab, uncheck Stereo.

In the Network tab, change the Error value to 80 and the Warning value to 15.

10ep.3.03 Release Notes Page 5 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Documentation Viewer
Use Adobe Reader 9.x or later for pdfs.

Online Help and Video Viewer

The supported browsers are:

Internet Explorer, latest version (Windows)

Mozilla Firefox, latest version (Windows, Linux)

You can set your browser preference within DecisionSpace Geosciences by selecting
Windows > Preferences > Web Browser > and selecting Default system web browser,
Firefox, or Internet Explorer.

Note: For Windows, if you have trouble accessing the online help using Internet Explorer, you
may have to adjust your settings to allow blocked content (Tools > Internet Options >
Advanced > Security > Allow active content to run in files on My Computer).

Welcome Page and Videos on Linux:

To access the Welcome page and videos on Linux, your system administrator needs to
configure your machines system settings to use the Mozilla Firefox browser.

If you experience trouble playing the videos, configure the proxy settings after launching
DecisionSpace Geosciences.

1. Select Window > Preferences.

2. Select Network Connections.

3. For the Active Provider, select Native.

4. Click OK.

For Linux computers the proxy is detected from either of these environment variables: http_proxy,
https_proxy. It should be configured as follows:

protocol://host:port

You can also specify the proxy bypass hosts by setting the environment variable no_proxy as a
comma-separated list of host names.

To view the help video thumbnails correctly, you must insert the following settings in the
DecisionSpace.ini file:

-Dnetwork.proxy_host=host

-Dnetwork.proxy_port=port

10ep.3.03 Release Notes Page 6 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Note: The application can not autodetect proxy settings if Gnome is being used. However, you can
set the following command in Linux for autodetect to work correctly.

http_proxy=protocol://host:port

https_proxy=protocol://host:port

You may set up a default proxy from within the LAN settings of your operating system and
DecisionSpace Geosciences will automatically pick up those settings. When proxy settings from
the Operating System are detected correctly, the settings are displayed in the Proxy entries panel
of the Preferences > Network Settings dialog box.

10ep.3.03 Release Notes Page 7 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Installation Instructions
DecisionSpace Suite 10ep.3.03
Refer to the DecisionSpace Geosciences 10ep.3.01 Release Installation Guide for detailed
installation information.

For Windows, it is important to verify that all other programs are closed before installing
DecisionSpace Suite software. If you are in doubt, a system restart is recommended.

Note: Any previously installed plug-ins must be reinstalled after DecisionSpace Suite has been
installed. Please see Advanced User Information in the DecisionSpace Geosciences 10ep.3.01
Installation Guide for instructions on the new 10ep plug-in process. Failure to reinstall the plug-ins
can result in session incompatibility issues.

Windows 7 Language Settings

DecisionSpace Geosciences supports US English only for some elements of the

software. If the Windows 7 system is set to a different language, the system can
fail on some pop-up menus.

Installer Path (URL)

For Windows environments, please make sure the directory path where the
DecisionSpace Installer is downloaded does not contain special characters such
as # or parenthesis. If there are special characters, the installer will not behave
correctly and DecisionSpace will not install correctly.

Licensing

If you are a current DecisionSpace Geosciences user and you experience poor
performance upon launching the application you should do the following:

verify you are pointing to a valid license server. This may be verified by checking
that your environment variable LM_LICENSE_FILE is pointing to a valid,
functioning license server or file.
set the environment variable FLEXLM_NO_CKOUT_INSTALL_LIC to the
numeral 1 (that is, FLEXLM_NO_CKOUT_INSTALL_LIC=1).
remove all license file entries in your registry or file system:
Windows - Delete all entries in your registry whose key is LM_LICENSE_FILE,
LICSRV_LICENSE_FILE, or LGCX_LICENSE_FILE.

More information on licensing is found in the DecisionSpace Geosciences

10ep.3.01 Release Installation Guide.

10ep.3.03 Release Notes Page 8 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

DecisionSpace Montage Software

This version of the DecisionSpace Suite includes DecisionSpace Montage software for use in
viewing and montaging CGMs. For more information, see the DecisionSpace Montage Getting
Started Guide and Release Notes in the Zeh directory of your DecisionSpace software
installation.

Basic information is also included in the DecisionSpace Geosciences documentation (Help >
Help Contents). Click on Creating Presentation Materials > Printing.

10ep.3.03 Release Notes Page 9 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Plotter Support
Quick Print
On Windows, the Quick Print option relies on the standard Windows File/Print mechanism. As long
as the printer has a properly installed Windows printer driver that conforms to the printing
mechanism of Windows, DecisionSpace software should support it. Most testing was performed
on Dell, Xerox, and HP small-format devices as well as on the wide-format HP T1100 and 4000
Designjets. If you miss some data while using the Quick Print option to wide-format HP devices,
try disabling the Send job as bitmap option of the driver.

On Linux, the Quick Print option relies on the Linux LP queue configured on the operating system.
PostScript data is sent to the LP queue. Only PostScript-enabled devices are supported when
using the Quick Print option on Linux.

ZEH Server
If you are submitting to a ZEH plot server, printers supported by the ZEH Plotting Solutions
software are supported. ZEH supports the following plotter makes:

Calcomp

Canon

EPSON

HP (PCL, RTL)

iSys

NeuraLog

Oc

OYO

PostScript printers

Versatec

Xerox

It is recommended that you use ZEH rasterizer 3.5.70 or above.

Other Plot Servers

If you are submitting to a third-party print server, consult its documentation for a list of supported
plotters.

When using SDI software for plotter support, it is recommended that you use version R12.0 or
higher.

10ep.3.03 Release Notes Page 10 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Launching DecisionSpace Geosciences 10ep.3.03

Linux
To run DecisionSpace Geosciences in a Linux environment:

From the terminal window, navigate to the DecisionSpace Geosciences 10ep.3.03

installation directory and enter the command:

./LaunchDS.sh

The DecisionSpace Geosciences Session Manager dialog box displays.

Optional: You can also run DecisionSpace Geosciences by invoking it from the OpenWorks
Command Menu. Use the following procedure to start OpenWorks software:

1. In a terminal window, check that the OpenWorks home variable is set:

echo $OWHOME

The terminal window readout should post the directory where OpenWorks software is
installed. If it does not, OpenWorks software is not installed, or your environment is not set
properly. Consult your system administrator.

2. In the terminal window, type in the OpenWorks executable:

startow

The OpenWorks Command Menu appears.

Windows
You can launch the DecisionSpace Geosciences using one of the following methods:

Make sure that language for your system is set to US English, currently foreign languages
are not supported in the DecisionSpace Geosciences 10ep.3.03 Release.

Double-click the desktop icon.

From the Windows Start menu, select All Programs > Landmark > <DSG10ep>

10ep.3.03 Release Notes Page 11 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

All Platforms
In the DecisionSpace Geosciences 10ep.3.03 release, the startup menus have changed.

Whether you launch the software from Windows or from Linux, the following steps are identical.

10ep.3.03 Release Notes Page 12 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Getting Started
DecisionSpace Geosciences 10ep.3.03 has a redesigned interface and user experience.

The startup page is different from previous versions, but the functionality is the same:

In addition to starting a session, the Welcome Screen is now hosted on iEnergy, Halliburtons
customer portal for Landmark software users. This page will be updated periodically as new
content, resources, and features are made available. Users will have instant access to the
following features from iEnergy:

The latest videos from the Video Learning Center

Whats New and Community Discussions from iEnergy Communities

Support Case creation and management

Support Knowledge Base search

Latest documentation and eLearning courses

10ep.3.03 Release Notes Page 13 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Opening a Session
To open a session, click one of the following buttons:

Restore Last Session opens the last session you worked on.

Open a Session allows selection of a different previous session other than the last one, a
list appears for you to check. If you have never used DecisionSpace, there will be no
previous sessions.

Import a Session opens a dialog box that lets you browse to a session saved in a specific
location.

New Session opens another dialog where you create the new session

1. Under Session Parameters, select each of the following:

(OpenWorks) District

(OpenWorks) Project

(OpenWorks) Interpretation project

Interpreter

Measurement system

10ep.3.03 Release Notes Page 14 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Domain

2. Under Session Options, choose the following:

Perspective (Geoscience, Geophysics, Geology, Earth Modeling, Microseismic,

Petrophysics, or Well Planning). Click Learn More under the Perspectives section of
the welcome page to learn about each perspective.

Click all of the Editors you want to display (Cube, Correlation, GIS Map, Map, or
Section).

3. Checking the Create Session and then add data check box will automatically display the
Add Data dialog box when the session is created. This allows you to quickly and easily add
data to your session.

Click Create Session.

Note: DecisionSpace Geosciences 10ep.3.03 is not fully compatible with saved sessions from
previous releases. If you receive an unexpected error when opening sessions from previous
versions, contact Landmark Support or use the online help (Help > Contents > Opening a
Previous Session).

Once your session has started, you may find the following features useful in helping you get
started using the software.

Workflow Guide
When you start DecisionSpace Geosciences for the first time, a Workflow Guide tab displays in
the window. The Workflow Guide contains straightforward help videos and instructions for many
common workflows, organized by perspective. Contents lists all workflows for all perspectives,
while Related Workflows lists the workflows for the selected perspective. If the Workflow Guide
is not exposed, open it by selecting Help > Workflow Guide.

Introductory Videos
Videos are currently being produced for DecisionSpace Geosciences. You can access them
from the Workflow Guide and from Help > Video Learning Center.

Getting Started Help

Additionally, you have access to the Getting Started section of Help in a stand-alone window.
From inside DecisionSpace under Help > Help Contents.

There is a search field at that top of the Help window and the contents section can be changed
from search contents to the Table of Contents via the buttons at the top.

10ep.3.03 Release Notes Page 15 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

International Trade Compliance

This application is manufactured or designed using U.S. origin technology and is therefore subject
to the export control laws of the United States. Any use or further disposition of such items is
subject to U.S. law. Exports from the United States and any re-export thereafter may require a
formal export license authorization from the government. If there are doubts about the
requirements of the applicable law, it is recommended that the buyer obtain qualified legal advice.
These items cannot be used in the design, production, use, or storage of chemical, biological, or
nuclear weapons, or missiles of any kind.

The ECCNs provided in Release Notes represent Halliburtons opinion of the correct classification
for the product today (based on the original software and/or original hardware). Classifications are
subject to change. If you have any questions or need assistance please contact us at:

[email protected]

Under the U.S. Export Administration Regulations (EAR), the U.S. Government assigns your
organization or client, as exporter/importer of record, responsibility for determining the correct
authorization for the item at the time of export/import. Restrictions may apply to shipments based
on the products, the customer, or the country of destination, and an export license may be required
by the Department of Commerce prior to shipment. The U.S. Bureau of Industry and Security
provides a web site to assist you with determining the need for a license and with information
regarding where to obtain help.

The URL is:

http://www.bis.doc.gov 1

Definitions
CCATS (Commodity Classification Automated Tracking System) The tracking number assigned
by the U.S. Bureau of Industry and Security (BIS) to products formally reviewed and classified by
the government. The CCATS provides information concerning export/re-export authorizations,
available exceptions, and conditions.

1. The Programs and Documentation may provide links to External Web sites and access to con-
tent, products, and services from third parties. Landmark is not responsible for the availability of, or
any content provided on, third-party Web sites. You bear all risks associated with the use of such
content. If you choose to purchase any products or services from a third party, the relationship is
directly between you and the third party. Landmark is not responsible for: (a) the quality of third-
party products or services; or (b) fulfilling any of the terms of the agreement with the third party, in-
cluding delivery of products or services and warranty obligations related to purchased products or
services. Landmark is not responsible for any loss or damage of any sort that you may incur from
dealing with any third party.

10ep.3.03 Release Notes Page 16 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

ECCN (Export Control Classification Number) The ECCN is an alphanumeric code, e.g., 3A001,
that describes a particular item or type of item, and shows the controls placed on that item. The
CCL (Commerce Control List) is divided into ten broad categories, and each category is further
subdivided into five product groups. The CCL is available on the EAR Web site (http://
www.access.gpo.gov/bis/ear/ear_data.html#ccl).

The ECCN Number, License Type, and the CCATS Numbers for this product are included in the
table below.

ECCN CCATS
Product/Component/R5000 Number License
Number

DecisionSpace Suite 5D002 ENC G054690

10ep.3.03 Release Notes Page 17 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Enhancements and New Functionality in 10ep.3

The following section gives a brief overview of the new features and functionality within this
release. For workflows using these features, please refer to the online Help for each component,
which can be accessed from the Help > Online Help menu.

DecisionSpace Base
General Usability and Performance

Auto Refresh of views for real time well updates.

Layers view has been added to allow the user to reference what is being displayed in a
Map, Section, or Correlation view, as well as Print Preview. Currently, Well Lists and
Conditional Pies are supported in the Layers view.

Hardcopy Enhancements:

Print Preview now offers a Legend plot shape. The Legend currently supports Well
Lists, Selected Well Lists, Wells within a Line of Section (LOS), and Conditional Pie
data.

DecisionSpace Petrophysics integration allowing customers to: access data viewers, QC

tools, and data management and pre-processing functionality within DecisionSpace
Geosciences, including the ability to:

Access data viewers, QC tools, data management, and pre-processing functionality

within DecisionSpace Geosciences.

Run workflows to select picks, create zones, and convert core data into log curves for
further investigation with wireline or MWD data.

Use the new Petrophysics perspective to adjust the interface for petrophysical tasks.

Image Capture utility provides an easy, effective way to save and share images of
interpretations for use in presentations, drilling status documentation and approval reports,
and state regulatory documentation.

DecisionSpace SDK to create custom plug-ins for a base installation of DecisionSpace

Geosciences

Calculator

New horizon unflattening calculation available both in the Calculator as a Provided

Calculation and as a shortcut directly from Horizons in the Inventory tree and Editors.

Data Analysis

Ability to use Data Analysis on the Natural Fracture Network (NFN) simulation

10ep.3.03 Release Notes Page 18 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

GIS

ESRI's On-the-Fly-Projection method chooses an applicable datum shift based on the

Source and Target coordinate systems using ESRI's proprietary method.

Using a spatial filter with SDE data allows the creation of a subset of data that has been
previously loaded into the GIS Map Editor to be added to a session.

GIS has the option to size Feature Labels that are affixed to a specified map unit height.
This feature is only actively used in the DecisionSpace Map editor and is disabled for the
GIS Map and the Cube editor.

Graphics

None listed at this time.

Geomechanics

None listed at this time.

Multivariate Analysis

None listed at this time

DecisionSpace Earth Modeling

None listed at this time.

Dynamic Frameworks to Fill

File > Reload Framework option now allows users to manually reload and refresh the
framework.

Framework Save a Copy behavior now performs a true Save as function, saving the
model as it exists in your session rather than its last-saved state.

Multi-user Frameworks allow entire asset team to load the same Framework and
simultaneously view the same dynamic subsurface representation in real time.

Interpreter ID rules now apply to Frameworks, allowing finer control over access to
Framework parameters.

If a framework is created with a private interpreter ID, that interpreter ID is the only
one which can make parameter (e.g. grid cell size, conformance, fault offset) changes
to the framework. Other simultaneous interpreter IDs can edit source data and load,
view, and refresh the framework, but cannot change framework parameters.

Each user can save a copy to their own interpreter ID with full access if they choose.

Frameworks can still be saved to public interpreter IDs with full access to all other
interpreter IDs.

10ep.3.03 Release Notes Page 19 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

DecisionSpace Fracture Productivity

The DecisionSpace Fracture Productivity plug-in is a technologically-advanced, yet
easy-to-use, software application that enables the determination of improved economic
outcomes in low and ultra-low permeability reservoirs by optimizing completions and well
spacing.

The plug-in brings unparalleled fracture productivity analysis in DecisionSpace

Geoscience through the execution of key workflows:

Models well and field performance over the life of the asset.

Advanced gridding that conforms to complex fracture geometry, captures critical flow
phenomena by providing high resolution near-frac discretization and allows users to
change model geometry in seconds not days.

History matching.

Well-spacing optimization.

Seamless integration of imported fractures from Natural Fracture Network (NFN),

FRACPRO and GOHFER that are stored in OpenWorks.

The plug-in is accessed separately from the Landmark Software Manager and has
independent release notes and installation instructions.

DecisionSpace Geology
Conditional Pies (point set) are now a query result option in the Search tool and
conditional pie display settings can be saved with the query.

Focus the view on a particular well in a map by right-click on a wellbore in a section,

correlation, cube, or map and selecting from a menu. This allows you to maintain focus on
your workflow as well as quickly find that well in a map.

GeoShaper enhancements, including:

Basic shapes (ellipse, circle, etc.) to use GeoShapers as a basic drawing tool.

Measurement options for all shapes with information displayed in associated tables.

Other general Usability enhancements.

Grid and Contour

2D Volumetric calculations have been added to Grid and Contour.

Contour rendering improvements in a cube.

Generate Difference Grids to create a difference grid between the saved grid and the
preview grid.

10ep.3.03 Release Notes Page 20 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

This lets you generate and save an initial grid/contour set and then a preview of a
grid/contour set where the parameters have changed.

To enhance the mapping workflow, users can now have confidence in where/how
the changed parameters are affecting their grid through automatic generation of a
difference grid.

Zone Manager qualifiers. Those map flags calculated from curve data statistics in
Zone Manager can be used as a category to quickly filter undesired values. This lets
you create a grid that is not skewed by low quality values and only represents values
that are accurate.

Display IL/XL and shot point values using the Section View Editors Borders and Grid
Lines panel.

Horizontal Well Segments let you split a wellbore into pieces in Correlation view
(Correlation View Editor > View Scale and Layout panel).

Resolves over posting of logs in repeated sections of a well (particularly useful in

unconventional fields)

When correlating and geosteering wells that decrease in TVD but increase in MD,
users will now be able to break the well into sections that eliminate over posting of log
curves and make it easier to accurately interpret surfaces and geologic features.

Inter-well point annotation to display the surface name, interpreter ID, and depth value
with borders and fill and to specify where annotation is placed, relative to the symbol.

Log Curve Aliasing to display log curves that cover different depths but are actually the
same curve. From the Log Curve Display Properties dialog box, you can create a
hierarchical list of curves and define their individual display parameters.

Manage wells in Correlation to easily move, remove, and add wells in the view.

Slide a key well up and down in Correlation to compare its data with another well.

Static scaling of coordinate grids, providing the option to set the grid at a specified interval
in a section so that when you zoom in and out, the grid lines do not automatically resize
(Section View Editor > Borders and Gridlines panel)

Surface pick filter to choose a specific interpreter ID and see the number of wells
containing that surface pick using a check box in the Add Data dialog box.

Surface pick qualifier and annotations (Last update date and Last user) to update the pick,
especially useful for workflows where teams use the same Interpreter ID.

New Well Core data type, including ability to bulk shift core data and change display
properties

Well List Display Properties enhancements, including:

10ep.3.03 Release Notes Page 21 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Editing Surface Pick annotation attribute parameters

Enhancements to well symbol options and ability to have different symbols for top and
bottom hole

Addition of several new basic symbols

Ability to display well symbols by status symbol color

Ability to display well symbols and well annotation in map units

Icon to adjust the data display order

Horizontal Well Correlation (Geosteering)

Section Geosteering: Auto-posting of Inter-Well Point based on lower surface isopach.

Curve Line Style and Scale Enhancements: easy to set the log curve line style and scale
for the log curves generated in the HWC workspace (Predicted, Filtered, Type Log, and
Projected curves).

Export Framework surfaces to GeoShaper Polyline: Save Framework surfaces as

Geoshaper polylines (VS mode) and display on DecisionSpace Geosteering Mobile.

Petroleum Systems

The Petroleum Systems Plug-In provides insight into fluid-oriented processes in 1D, 2.5D, and
3D

Plug-in installed separately and provides its own release notes and installation
instructions

Downloaded from Landmark Software Manager

Does not require a separate license

Based on Permedia Petroleum Systems software

For information on enhancements, fixed issues and known issues for the plug-in, consult the
Petroleum Systems Plug-In Release Notes

Structural Modeling

None listed at this time.

Wellbore Analyzer

None listed at this time.

10ep.3.03 Release Notes Page 22 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Zone Manager

None listed at this time

DecisionSpace Geophysics
ezValidator

New unconformity timing options allowing you to set the unconformity to have
occurred before or after faulting.

New strain display options to show strain in the unfolded/unfaulted state as well as the
folded/faulted state.

Multi-survey

Horizon Box Interpolation in Cube

Copy/paste display properties from one to others (seismic, horizon, fault)

Seismic Display Enhancements

3D Survey Intersection in the Section Header

Live Trace Display in the Cube

2D Lines Color by Survey

Interactive Mistie Analysis

Cross-correlate the selected reference and target seismic from the Section

Interactive application of shift, phase and amplitude gain to target seismic or 2D

survey

Create a new dataset using the corrections applied to the target seismic

Interactive Control of Overlapping 3D Surveys

MB3 to Change the Displaying Priority/Order

Drag to adjust the panel divider between two overlapping surveys

Double-click to exclude seismic null traces of the prioritized survey

Horizon unflattening calculation available both in the Calculator as a Provided

Calculation and as a shortcut directly from Horizons in the Inventory tree and Editors.

Ability to show histogram of seismic volume in a cube.

10ep.3.03 Release Notes Page 23 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Seismic Analysis

Reflection Coefficient spike display improvement

Synthetic Contribution Plot

Ability to display all picks in the same color

Seismic Attribute Generation

Seismic flattening and unflattening processes available in the Seismic Attribute Tool
under Processes > Utility.

Seismic mis-tie correction (time, phase, amplitude) for 2D and 3D seismic

Velocity Modeling

This release of the Velocity Modeling tool provides users:

Additional support for regional velocity modeling

Support for multiple 3D survey input

Support for velocity grid input (support for 2D layer cake velocity models).

Support for constant velocity gradient input per layer (V0 + kZ models)

Kriging, Kriging with External Drift, and Collocated Cokriging support of velocity grids

Expectation with Uncertainty analysis simulation modeling and error mapping of

velocity data

Additional Depth-Depth workflow support

Interpolation of depth stretch values along structure

Well tops plus depth horizons input of depth stretch values

Selection/usability enhancements for the Velocity Zone Analysis columns including update
to % Vertical computation.

Crossplotting enhancements

Ability to crossplot checkshots vs. stacking functions vs. pseudo velocities

Ability to estimate V0-K per geologic layer

Support for overlaying velocity models on horizons and grids.

10ep.3.03 Release Notes Page 24 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

New T-D table functionality to match SeisWorks, including Dynamic Time-Depth

Dashboard and Well Info tab.

Property Modeling

Kriging, Kriging with External Drift, and Collocated Cokriging support of velocity grids.

Expectation with Uncertainty analysis simulation modeling and error mapping of velocity
data.

Volume Visualization

Cube Enhancements:

Mouse Wheel Zoom now works in all mouse modes, including Arrow/Select, Hand/
Rotate, and Interpret/Edit

The <Alt> shortcut key to temporarily change mouse modes in the Cube is now bi-
directional. You can use it to temporarily enter Hand mode when you are in Arrow
mode. You can still use it to temporarily enter Arrow mode when you are in Hand
Mode.

The <Alt> shortcut key when used in conjunction with the Arrow (animation) keys will
increase the animation speed.

Cube Modes and Shortcut Key Quick Start Guide has been added to the Help menu.

Seismic Probe Enhancements:

Cube Shortcuts for Center on Center of Probe

New shortcut keys 0 and 1 (from the standard keyboard, not the keypad) which
will center the view on the center of a selected probe. This is especially useful for
box-probes where you can now easily rotate your view around the center of the
probe.

The F8 shortcut key in the Cube has been updated so that the scene cycles
through view orientations relative to inline/xline directions when a probe is
selected. (It still cycles through orientations relative to the compass directions
when a probe is not selected.) Shift + F8 now allows you to cycle through the
orientations in the reverse direction.

New Style Option for Probes: Seismic probes have a new display property called
Style. The options are opaque & transparent. When Style is set to transparent, the
probe will honor the opacity setting in the color bar. When Style is set to opaque, the
probe will ignore the opacity setting in the color map and display it without any
transparency.

New Opacity Setting for Volume Visualization Probes: For probes which are displayed
using either blending, RGB blending, or combo-mambo there is a new opacity setting

10ep.3.03 Release Notes Page 25 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

in the volume visualization section of the probe DPE. This allows you to set uniform
opacity value for these types of probes. In the past this was set by adjusting the
opacity of the base volume.

Seismic Probe Handles in the Cube have been improved in a number of ways,
including being less intrusive (flush to seismic, not Cubes), changing color as they are
selected, changing size as you zoom in/out, and turning off when a probe is
unselected.

DecisionSpace Log Calculator

None listed at this time

DecisionSpace Microseismic
Conversion of microseismic events to point sets allows the use of data analysis and
multivariate analysis functionality to better interpret microseismic data. It allows the
combination of multiple stages from different wells for more meaningful analysis.

DecisionSpace Natural Fracture Network

None at this time.

DecisionSpace Well Planning

Usability Enhancements Numerical spinner step size can be increased or decreased by
a factor of 10 by using the shift + up/down arrow, respectively. MultiWell Planning can be
launched from the Well Planning Menu item.

Horizontal Targeting Geosteering The horizontal targeting can now calculate the number
of waypoint targets required to stay within a defined range of depths. This will aid planners
by keeping the wellpath in the formation and maximizing production.

Target Assignment You can now MB3 your plan or target in the tables to assign targets
to plans. The Plans table option will list all targets within range, and you can sort by
distance, azimuth, and TVD from the surface location

Well Planning Inventory Organization Define the type of hazard, boundary, or target and
the inventory will automatically group them together.

eNotes Support eNotes has made the move to the 10ep Platform. It will no longer be a
separate install, a separate license is still required.

Replan selected sites Building upon the previous releases replan options, You can now
select one or more sites to replan your targets.

Azimuth column in Plans Table Users can add the azimuth column to the plans table to
rotate plans around their surface location to a new azimuth.

10ep.3.03 Release Notes Page 26 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Reference Site location placement A reference site can be defined for the algorithm to
pattern around. This will aid in organizing the surface locations into rows and columns,
aiding in defining surface facilities.

10ep.3.03 Release Notes Page 27 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Enhancements and New Functionality in 10ep.2

The following section gives a brief overview of the new features and functionality within this
release. For workflows using these features, please refer to the online Help for each component,
which can be accessed from the Help > Online Help menu.

DecisionSpace Base
General Usability and Performance

Cube Seismic Probe performance for Shared Memory volumes significantly improved

manipulation and animation of all probe types faster and smoother

particular improvements for box probes created from larger volumes

Objects in Cubes can now be hidden and un-hidden using shortcuts

Middle-click (MB2) hides objects in Hand/Navigation Mode and Arrow/Selection Mode

but not Interpretation Mode

Objects hidden by middle-clicking (MB2) can be re-displayed using the e shortcut

key

Last 30 objects hidden are remembered in order

Only objects that can be hidden from Inventory can use the shortcuts (i.e., well lists
can use shortcuts, but individual wells can not)

Exception for 2D seismic lines -- middle-click (MB2) on a seismic line turns the
associated seismic data on or off, not the 2D line itself; application remembers last
middle-click action for 2D seismic lines.

Switching between Arrow/Select Mode and Hand/Navigation Mode by double-clicking the

(MB1) now works anywhere in the Cube.

Double-clicking over an object in the Map and Section enters Interpretation Mode,
similar to a Cube.

Interpretation Mode can still be entered in the Cube by using Shortcut Keys, the
Interpretation toolbar, or the Interpretation drop-down the Application toolbar.

New Display Properties dialog boxes have been added for Synthetic Seismic, 2D Line
Lists, and 3D Surveys.

You can rename an editor by right-clicking on the editor name tab, then selecting Rename.
You can also access rename editor tabs by selecting File > Rename Editor from the menu
bar.

10ep.3.03 Release Notes Page 28 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

You can customize the items shown in the Application toolbar and in the floating toolbars.

You can customize the items shown in the Tools icon menu for each Perspective.

You can use a command line prompt to open a session and define the editors that are
used in the session.

Calculator

None listed at this time

Data Analysis

Ability to use Data Analysis on the Natural Fracture Network (NFN) simulation

GIS

The GIS tool features a measurement tool that allows you to measure the cumulative
length and/or area of line(s) and polygon shapefiles respectively. With the measurement
tool, you will be able to make a selection in the GIS Map and measure the length or area
of the shapefile.

When adding WMS data to the GIS Map, you can now select service layers individually.

Graphics

None listed at this time.

Geomechanics

None listed at this time.

Multivariate Analysis

None listed at this time

DecisionSpace Earth Modeling

RESQML

Support for unstructured grids

3D Grid

3D Grid Local Upgrade

Automatically calculated difference between updated framework and grid

Preview changed in grid geometry

Update property values around a new well

10ep.3.03 Release Notes Page 29 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Local property update for petrophysical properties

Local property upgrade for facies

Save computational variogram parameters

Point Sets / Blocked Point Set

Append new logs and/or wells to an existing blocked point set

Load blocked point set associated with grid when metadata is deleted

Convert point sets to log curves

DecisionSpace Natural Fracture Network

NFN Upscaling to dual property model in vdb

Predict natural fractures from surface geometry

Support NFN property simulation per fracture set

Ability to use Data Analysis on NFN simulation

Color code stereonet by fracture type and interaction with 3D view

Broaded stereonet plot functionality to accept fracture network objects from any source

Limit fracture vertically by a K layer when using a grid

Use polygons to select area for NFN simulation

Allow to rotate the NFN slice for creating arbitrary oriented fracture slices

Well Fracture Picks

Add a size slicer in the DPE for well fracture picks

Popup dialog box containing all well fracture picks for a given well list

Dynamic Frameworks to Fill

Derivative Gridding Algorithm

Surface polygon AOI cookie cutter

ISP per Framework for Picks

Pick confidence filter

Multi-edit Minimum Thickness

10ep.3.03 Release Notes Page 30 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

DecisionSpace Geology
Grid and Contour

New algorithms, including:

Frameworks Algorithms
Least Squares
Derivative Gridding
Refinement Gridding
Kriging Anisotropic
Kriging Isotropic
Triangulation Gridding

Point Gridding Plus

Kriging

Specify display properties for preview contours

Log Curve Display

Display separate Color Bars for log curves

Log Curve fill enhancements (Correlation and Section), accessed through an icon in the
Well Layout Track Details panel, to define single or multiple fill values, including solid
colors, lithology strips, lithology symbols, or color maps

Specify log curve scales by individual wells

Pick Enhancements

Ability to control symbol parameters for inter-well points

Ghost overlay improvements for well picks and log curves, including the ability to create
ghost overlays for all or part of a wellbore display

Pick flattening focus to display flattened pick in the center, top, or bottom of a Correlation
view

Well Display

Enable Well List Display Properties dialog box to use Zone Attribute data

Independently controlled surface and bottom hole location and wellbore line styles,
symbols, and colors using the Well List Display Properties dialog box

Level of Detail enhancements to control symbols, annotation type, and annotation text
(accessed in the Map View Editors Scale Dependencies panel)

Select wells using four kinds of polygons (mapping polygons, geoshapers, distance
measurement polygons, and GIS shapefiles) to send them to:

10ep.3.03 Release Notes Page 31 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

a well list

Well Data Manager

a new Correlation

a new Section

Well Locator to highlight well in a map with user-defined color and line thickness

Wells added to an existing Correlation display are placed in the most logical positions,
relative to the other wells already displaying in Correlation.

Well Layout

New default well layout for Correlation that spreads out wellbore data by automatically
assigning wellbore data to tracks, according to a structured track priority. This new layout
contains three tracks:

Correlation track (left) -- contains a TVDSS\Linear scale, horizontal and vertical lines,
and the well TD

Depth (center) -- contains a TVDSS scale, horizontal lines, line labels and the well TD

Resistivity (right) -- contains a TVDSS\Log scale, horizontal and vertical lines, and
well TD

Horizontal Well Correlation (Geosteering)

Section Geosteering: Auto-posting of Inter-Well Point based on lower surface isopach.

Curve Line Style and Scale Enhancements: easy to set the log curve line style and scale
for the log curves generated in the HWC workspace (Predicted, Filtered, Type Log, and
Projected curves).

Export Framework surfaces to GeoShaper Polyline: Save Framework surfaces as

Geoshaper polylines (VS mode) and display on DecisionSpace Geosteering Mobile.

Petroleum Systems

Introducing the Petroleum Systems plug-in, providing insight into fluid-oriented processes in
1D, 2.5D, and 3D

Application installed separately and provides its own release notes and installation
instructions

Downloaded from Landmark Software Manager

Does not require a separate license

10ep.3.03 Release Notes Page 32 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

1D Viewer

Includes a powerful set of tools for conducting 1D basin modeling and well-focused
analysis in frontier exploration areas and shale field developments

Uses OpenWorks wells to build 1D basin models, perform well and source rock
analysis, and create pressure from wireline studies

Models sediment maturity, source rock properties, thermal histories, and rock
property evolution, alongside traditional wireline processing

2.5D Prospect Ranking

Works with the Dynamic Frameworks to Fill workspace to perform quick prospect
ranking and lead definition on selected maps or surfaces

Generate closures along with fetch area, calculate volumes, and use fill-spill analysis
to understand fluid flow relationship between structures

3D Reservoir Filling

Perform petroleum migration filling simulations on 3D grids

Set various source points, fill the model, and analyze the resulting accumulations

Evaluate and rank geological models, quantify containment potential (reserves), and
assess connectivity and compartmentalization

Structural Modeling

None listed at this time.

Wellbore Analyzer

None listed at this time.

Zone Manager
None listed at this time

DecisionSpace Geophysics
Multi-Survey

Header display includes 2D intersection displaying line name, volume being

displayed, and display orientation

Freehand opacity for seismic in sections and maps

Live trace outline for 3D seismic

10ep.3.03 Release Notes Page 33 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Option to not display NULL/dead traces

Identify which interpretation is on which survey when adding session data

Improved horizon visibility in maps and cubes

Horizon delete improvements in cubes

Seismic Overlay and on-the-fly Attribute in sections

Seismic correlation (time, phase) interactive shift 2D/3D mode in sections

Performance

3X faster compressed seismic performance

Seismic Probe performance for Shared Memory Volumes significantly improved in

Cubes. Manipulation and animation of all probe types faster and smoother, especially
for box probes and for large volumes.

Seismic Analysis

Well Tie Template

Limit number of tie points for editing

Snap by synthetic onset to seismic onset while editing tie point

Check shot points over the interval velocity log track

Stratigraphy and lithology display on a well tie track

VSP workflow from data loading to visualization

Seismic Attribute Generation

Seismic mis-tie correction (time, phase, amplitude) for 2D and 3D seismic

Velocity Modeling

This release of the Velocity Modeling tool provides users:

Added the DepthTeam Express plugin to the Tools > Velocity Modeling drop down menu.

Added Attributes tool (Trace Calculations > Depth Depth Stretch) to stretch seismic
volumes from seismic-depth to well-depth. This tool includes a QC volume of all the depth
stretch values applied in 3D space.

10ep.3.03 Release Notes Page 34 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Added functionality to use OpenWorks time or depth grids for structural control of
velocity models.

Added functionality to compute the time error between checkshots and gridded time
surfaces, which can be gridded and kriged to correct the time surfaces.

Added ability to read in 2D RMS .2V2 velocity volumes and convert them to interval
velocity pointsets, which can be gridded and kriged.

Updated the Well Surface Picks Details pseudo velocity table to display the Top, Base and
%Verticalness of the wells in the zone of interest.

Added functionality to save T-D functions as Log curves from the Time-Depth Curves
selection tab and from the Time-Depth Curve Editor.

Added functionality to save selected wells as a well list from the Time-Depth Curves
selection tab.

Many usability updates such as:

Added MB3 option to load velocity model attributes directly to the cube view and to
shared memory

Automatically add brick exported velocity models to the Inventory Tree

Added functionality to properly display velocity models along the boundaries of a 3D

survey in map and cube views

Removed the initial velocity modeling splash screen

Single click to select velocity boundary surfaces

Volume Visualization

None listed at this time.

DecisionSpace Log Calculator

None listed at this time

DecisionSpace Microseismic
None listed at this time

DecisionSpace Well Planning

Setbacks for Boundaries - You can now create setbacks for one or more boundaries
based on azimuth or a set distance. Each side of the setback can have its own unique
distance from the boundary.

10ep.3.03 Release Notes Page 35 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Plans to Shapefiles - You can now save Well Planning objects, including boundaries,
hazards and well plans, as to shapefiles for use in GIS. The new shapefiles are named in
three different ways: surface locations use the suffix _mk; trajectories use _ln; and targets,
hazards, and boundaries use _ply.

Wellbore Planner Plugin for Geoprobe/SeisWorks - Targets, plans, and sites created
within Geoprobe and SeisWorks are now synchronized in the Well Planning Inventory.

Rename Utility - The new Rename Utility allows users to perform a mass rename of Well
Planning objects, such as plans, targets, sites.

DS ADX Support - Well Planning supports connection to the new DS ADX tool to improve
data exchange with EDM and COMPASS data.

Wellbore Planner Target Report - A target report can be generated through the ASCII
export. This report shows the coordinates for your penetration point and corner points of
all targets in one well.

ASCII Import Optimization - Workflows that involve the import of targets and sites have
been optimized. In a previous release the target import could assign targets to plans. Now,
Sites can be imported with slot names. This is further improved by matching the targets
and plans to a slot if the slot and plan names matched, drastically improving data import.

Replan Selected Plans - Select plans in the Well Planning inventory, change the
parameters in Multi Well Planning, and replan targets, plans, and sites to generate a new
trajectories.

Behind Fault Improvements - In the behind fault workflow the plan azimuth trends to the
average dip azimuth. This difference in Listric faults can place your targets closer to the
fault than initially planned. Two additional options have been added to address this:

Project Laterally, rotates your target around the fault plane and the section line
intersection to be perpendicular to the fault plane.

Project Sectionally, moves your target along the section line so that it is the min
distance from the fault in a 3D scan. This allows the targets to be snapped
perpendicular to the wellpath and maintain the minimum offset distance.

Scan Options - You can now automatically or manually scan plans for failures in buffers
and limits with hazard, boundary, and redline parameters. When set to automatic a dialog
pops up warning you of the failure as it occurs.

10ep.3.03 Release Notes Page 36 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Enhancements and New Functionality in 10ep.1

The following section gives a brief overview of the new features and functionality within this
release. For workflows using these features, please refer to the online Help for each component,
which can be accessed from the Help > Online Help menu.

DecisionSpace Base
General Usability and Performance

A new Welcome page displays when you first start the application. This page has links to
videos and help topics on Perspectives, Sessions, Getting Started for new
DecisionSpace Geoscience users, and three Whats New videos on the new look and
feel. Landmark suggests that you review the video on perspectives as well as view the list
of Landmark created perspectives and the description of each. The Sessions video tells
new users about sessions as well as demonstrates the new Sessions task pane.

The application is built around Perspectives. Perspectives are a set of tools that are
required to perform your workflow. For example, a geologist uses a different set of tools
than a drilling engineer. The active perspective determines the list of tools displayed in the
Tools icon menu. Each perspective has a default set of interpretation task panes.

Creating a Session, Opening an Existing Session, and Importing a Session dialog boxes
have been simplified. The major change is that you will need to choose a perspective
when creating a new session.

The Adding Data to a Session has changed to a green plus ( ).

The Tools menu has been broken into two parts. There is a new Utilities menu that
contains items that are common to all perspectives. Tools that are used by one or a few
perspectives are accessed from the Tools icon on the Application Toolbar.

A new search feature called Quick Access is available on the toolbar. If you want to use a
tool that is not in your perspective toolkit, or you cannot find the tool, type the tool name in
the Quick Access text box then select the tool from the list provided.

Standard click, Ctrl+click, and Shift+click functionality has been implemented throughout
the application.

The Select Session Data dialog box has been changed to the Add Data dialog box and
has been redesigned. The third Whats New video shows you the new dialog box.

The view tools bars that were located on the left side of the view, have been changed to
floating toolbars in the editors. The icons available in the toolbars are dependent on the
editor (Cube, Map, etc.) and the active Perspective. There is a demonstration of the new
toolbars in the second Whats New video.

16-bit shared memory volumes has been added which allows users to load higher
resolution data into shared memory. This is useful for interpreting high resolution data,

10ep.3.03 Release Notes Page 37 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

such as seismic attributes, where traditional 8-bit shared memory volumes do not have
enough precision.

High Definition (HiDef) Color - High Definition (HiDef) color allows the color map to
represent the true resolution at the data at the color fidelity supported by the graphics
hardware.

Using the 8-bit color map, input values are mapped into 256 discrete bins. Each
discrete bin maps to a specific 32-bit color (RGBA). In some cases, two different
values can lie in the same bin, where they map to the same RGB Color

In HiDef color, thumbs are used to define a transfer function that is used to map
input values to a 32bit color that is interpolated in the range between two thumbs.
Using HiDef color, even close input values map to separate colors. GPU-based
interpolation ensures system performance. The Inventory Tree task pane has been
extensively redesigned.

A new task pane called sessions has been added. It is in the icon group on the left side of
the workspace. This shows you all the sessions you have been in and provides a list of
sessions you have uses, a list of all the editors in each sessions, and a thumbnail graphic
of each of the editors.

Several new items have been added to help you get started in the application.

Dynamic Help provides information on the active tab. Select Help > Dynamic Help
from the menu bar. When you click on another tab, the Dynamic Help changes to
reflect the active tab.

Workflows have been reworked and many more are available. Select Help > Workflow
Guide from the menu bar. A list of all the workflows is listed if you click on the
Contents link.

Many new videos have been created. Some are available in the help system while
others are available from a server.

Views have been renamed to editors (for example, Map Editor, Section Editor).

The toolbars associated with an editor are no longer on the left side of the editor.
Instead they are floating and you can place them anywhere inside the editor.

The view editor icon has changed to .

Each icon now has only one function.

Task panes are represented by icons on the left and right side of the window.

Tabs have been replaced by icons.

The icons available are based on the perspective you selected.

10ep.3.03 Release Notes Page 38 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

The icons are put into groupings; each group has a restore icon above the group.
Click the restore icon and the task panes are docked.

Calculator

If/Then/Else equations (including nested equations) allows multi line calculations to be

included within IF blocks: to calculate oil/water contacts, pay curves, merge or trim
horizons or surface grids, and so forth.

Data Analysis

None listed at this time.

Graphics

None listed at this time.

Geomechanics

None listed at this time.

Multivariate Analysis

Heat Map

CART

Cluster Analysis

DecisionSpace Earth Modeling

Grid Merging

Grid Resampling

DecisionSpace Natural Fracture Network

Use stereonet to identify fracture sets

Visual Validator for natural fracture networks

Allow minimum fracture length per fracture set

Allow customized triangle mesh for fracture networks

Data Analysis plots for NRM properties

Visualization of NFN by interval/fracture sets/property filters

Natural Fracture Network (NFN) simulation constrained by grids and framework

Fracture set truncation

10ep.3.03 Release Notes Page 39 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Multiple interval NFN simulation

NFN basic data analysis, including stereonet, histograms, and distribution

Multiple interval NFN property simulation

Copy and paste fracture parameters

NFN simulation in memory source

NFN persistence

When creating an NFN fracture slice, a dialog will appear where the user can select to
automatically inherit the fracture network data range and colormap in order for the fracture
slice properties to match exactly the ones for the fracture properties. The latter is needed
since the fracture network and the fracture slice have different property ranges and it
saves the user several steps when trying to match the colormap and data range.

Fracture tooltips display various types of information on the fractures and related
properties

The fracture set ID display interleaves the interval ID and the fracture set ID in order to
identify fracture objects from different intervals and to be able to map it to the colormap
display. The integer part of the property value is the interval and the decimal part
represents the fracture set ID on the colormap.

Fracture Network objects and fracture slice objects can display Element properties

Dynamic Frameworks to Fill

3D GeoShaper interpretation.

Ability to add OpenWorks contours as FW Attribute and Structure maps.

Asymmetric cleaning distance.

Change to true bottom-up volumetric slicing instead of top-down slice reporting.

Compartment opacity default.

Concave surface hull

Controlling fault sense in Frameworks (Normal/Reverse).

Fault as model boundary.

Features from patches 10.0.2 10.0.6.01.

Framework Volume of Interest:

Multiple Volumes of interest per Framework.

Digitize polygon.

10ep.3.03 Release Notes Page 40 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Select OpenWorks Polygon.

Match surface(s).

Select compartment types to generate.

Earth Model uses Framework Volume of Interest.

Improved accuracy of Earth Model generation from Frameworks.

Improved Add Sources to DFF dialogue.

Merge/split Framework fault source data.

QC map table enhancements.

Surface performance improvements

Surface smoothing.

DecisionSpace Geology
Performance improvements to well data loading and visualization

Redesigned Geo-reference workflow

Scale dependency of visible data in map view (level of detail)

Directional Survey

View both preferred and non-preferred directional survey data for wells

Ability to add directional survey data for particular wells (rather than for all wells in the
project) into a session

View detailed information about each data point in a survey

Change display properties of survey points and survey path lines, including:

size, color, decimation rate, and calculation method, for survey points and line color,
width and style for survey paths

option to display survey paths for both preferred and non-preferred surveys

Drag and Drop loading of log curves, directional surveys and grids

GIS improvements:

Numerous GIS-based workflows, including Thematic Mapping

GIS based search utility

10ep.3.03 Release Notes Page 41 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

GIS Coordinate Transformation tool

Creation of dynamic well lists

Grid and Contour tool redesigned, including ZMap algorithms and volumetrics

Simplified Well Query tool for session data (integrated with the new GIS Advanced and
Global search capabilities)

Surface Pick Aliasing, which allows you to create alias lists of picks that have varying
names, spellings, or interpretations for the same surface

Strat Column Editor Improvements:

New strat column type called Surface

Displays a set of surfaces instead of strat units

Is one generation only

Presents a new user interface to create and edit surface strat columns

Additional control over strat column annotations

Surfaces in new Surface column type can be labeled with surface name, age, and/or
age uncertainty

The same annotations can be applied to strat unit bounding surfaces in other column
types

Surfaces with age uncertainty (minimum/maximum ages) can be displayed with error
bars in strat column view

Multiple strat columns can be imported at once

New strat column import options handle how strat columns with the same name are
overwritten or renamed

Strat columns allow RGB colors, which are no longer limited to 64 OpenWorks colors

Horizontal Well Correlation (Geosteering)

Well Plan wellbore paths (OpenWorks Non-preferred Directional Surveys) displayed in the
HWC Section View

Block Shift the entire Select Interval using the Shift key in the Vertical Correlation View

Add editable green and red Anchor Lines to the start/end of the Select Interval

Add Stratigraphic Marker Lines parallel to the HWC Linear Surface

10ep.3.03 Release Notes Page 42 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Support Vertical Section distance domain in HWC workspace. A Lateral Azimuth value
defines the Line of Section azimuth.

Improved Cursor Tracking line in the HWC Workspace

Cut and Paste Directional Survey data directly into OpenWorks 10.3 tables

Structural Modeling

None listed at this time.

Wellbore Analyzer

None listed at this time.

Zone Manager

A new Add to Frameworks option creates Frameworks Attribute Maps from Zone Manager

Zone Manager Attributes added as a data option in Multivariate Data Analysis

DecisionSpace Geophysics
16 bit Shared Memory

Arbline Probe creation by using Shift + middle-click (MB2) to drag and rotate the probe in the
Cube. Return to an inline or crossline probe by right-clicking (MB3) and selecting either Show
Inline or Show Crossline.

Automated Fault Interpretation Tracking

Automated
Slice: User specifies a single time slice to track faults on
Volume: User specifies a volume or sub-volume to track faults in

Semi-automated
User supplies seed segments, which are then grown

Task pane containing expandable sub-panels:

Tracking volume: User specifies fault attribute volume used in tracking
AOI
Generate Horizontal Seed Segments
Single z-slice, seeds for tracking on a slice
Multiple z-slice, seeds for tracking in a volume

Track Horizontal Seed Segments

Parameters for tracking both slices and volumes in automated workflows

Grow faults
Parameters for tracking seed segments in semi-automated workflows

10ep.3.03 Release Notes Page 43 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fault Data Analysis:

Dialog box containing:

Table of faults
Rose Diagram for fault dip-azimuths (primary) and strikes (secondary)
Quarter Rose Diagram for fault dips
Histograms for:
fault length
fault height
fault area

Functionality
Save faults to OpenWorks software
Display faults in DecisionSpace software
Delete faults
Merge faults
Single or multiple figure fault selection
Union/intersection logic

Right-click button on selected faults in the Inventory:

Delete selected faults
Merge Selected faults
Open Fault Data Analysis

Fault interpretation enhancements

Fault Snap increases fault picking accuracy by snapping faults to the correct location, based
on specified seismic data.

Fault Rerib populates a fault with regularly-spaced segments (ribs) to

Fill in a fault

Generate input segments for fault tracking

Generate vertical fault segments after tracking on time slices

Decimate faults that have been tracked with too many segments

Fault Trim cuts the ends of faults based on specified top and base boundaries

Fault Merge combines selected faults into a single fault

Horizon tracking Clipped Amplitude parameter to track amplitude peaks on seismic data
during tracking; also available in ezTracker Plus

Section highlight in map

Display extents of the section currently visible in a section

10ep.3.03 Release Notes Page 44 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Interactively zoom and scroll

Move, rotate, and extend geometry of a Section

Seismic data enhancements

Display on Top in Inventory to display multiple seismic volumes on top of one another
by right-clicking (MB3) on a volume and selecting Display on Top.

Live Trace Outline shows the real outline of live traces in a Map

created by right-clicking (MB3) on a seismic volume in Inventory and selecting

Create Live Trace Outline
outline is written to the database
once calculated, becomes the default display instead of the original seismic outline
unless disabled (Contents > Data Properties > Seismic > Show Map Outline)
works on null-trace data only

Seismic Gain to adjust the seismic gain in a Section (only)

activated by clicking to focus and using Page Up/Page Down keys to see the gain
increase/decrease on the seismic
changes the seismic min/max and adjusts the selected color map.

Snap Seismic Section on Segments to create a Section based on fault segments

activated by right-clicking (MB3) on an existing fault (or faults) and selecting this
option from the menu (Fault Interpretation mode in Map or Cube)
can create multi-panel displays to show all faults in a Section

Vertical Seismic Profile (VSP)

Display VSP data alongside other session data in Maps, Sections, and Cubes

Display multiple VSP sources and receivers (represented as panels) side by side in
the view

Change the symbol and size of VSP Sources and Receivers

Displays zero offset and 2D VSP geometries only

Volume rendered probes to display all data in the probe, not just the data on the probe faces

Seismic Attribute Generation

Ability to calculate the Likelihood Volume for fault analysis from the Seismic Attribute
Generation dialog box

10ep.3.03 Release Notes Page 45 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Velocity Modeling

This release of the Velocity Modeling tool provides users:

Added new conformance of PROPORTIONAL_UNFAULTED, which allows the velocity

conformance to ignore dangling faults within formations.

Reordered the Surface Pick Details dialog box and updated the velocity model data
editors.

Added a set of constant velocity formations to the Formation Manager.

Added a multi-survey option allowing users to select the surveys from which horizon data
is accessed.

Volume Interpretation

None listed at this time.

DecisionSpace GIS
There have been lots of changes to the GIS component. Some of the new main features
include:

Custom transformation control

New set of tools in GIS Map such as Buffer and Time Slider

Support for .MPK file extension

Export as shapefile capability from AGS, MPK, FGDB, and Shapefiles loaded in the
DSG Session

Recursive folder search

New Georeferencing Perspective

Centralized GIS Data connection control

Search in GIS Map

For help finding new features and workflows, please read the online help Help > Help
Contents.

DecisionSpace Log Calculator

Added multiple line If, Then, and ElseIf syntax to Log Calculator LogCalc models.

Improve Log Model Editor for LogCalc models by adding List options to select Log Curve,
Lithology Strip, Well Interval, Logging Parameter and Zone Parameter data types.

10ep.3.03 Release Notes Page 46 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

DecisionSpace Microseismic
You no longer are required to display wells in order to view microseismic data.

DecisionSpace Well Planning

New platform with usability improvements

Progress and/or activity indicators have been added to various operations to help
inform users when processes are working.

Performance improvements

Cleaner menus

Multi-zone horizontal targeting

Horizontal Targeting has been improved to allow targeting more than two formation
depth layers. This functionality also has the capability to do complex layering offsets.

Unique pad size visualization

DecisionSpace Collaborative Well Planning now allows polygonal shapes to be

assigned as outlines, to be used in visualizing the extents of a surface location.

Unitization

Unitization is the capability to create units around existing planned wells and sites or
within an empty planning boundary.

Statuses for pads

By setting site statuses, a field development can be re-planned after existing surface
locations have been through permitting or construction.

Improved cost estimation

Cost estimates for a scenario now include further options for completion type of
associated costs.

Support for latitude and longitude

All data tables and import routines now have the capability to display latitude and
longitude in decimal degrees.

All the Well Planning import routines will now recognize and convert degrees,
minutes, and seconds upon importing data.

Easier access to slot templates

10ep.3.03 Release Notes Page 47 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Specification and editing of slot templates is now possible without having run a field
design process.

All Well Planning-related data is now viewable in specified data tables within the main
application interface.

10ep.3.03 Release Notes Page 48 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in 10ep.3.03

This section explains issues that have been fixed in DecisionSpace Geosciences 10ep.3.03.

Note: Defects entered in PeopleSoft are appended with (PS). Defects listed using Microsoft
Visual Studio Team Foundation Server numbers are not appended. Whenever possible, both
numbers of the defect are reported.

For support, contact: http://css.lgc.com/InfoCenter/index?page=home

Defect ID Summary

General
359435 Shared Memory Stability: Application crashes when loading shared memory
volume during the session restore.
363982 Section Stepping with Faults: Stepping through sections in a session with a
large number of faults causes display problems and the session becomes
sluggish. This issue also causes session saving and session restoring to fail.
367966 Session Restore: Restoring sessions is too slow.
370363 Session Close: Error message appears when closing a DecisionSpace
session. Changes have been made to some platform files to resolve this error
message and other issues related to it.
372115 Sessions: DecisionSpace log file needs to include the active session file
name.
372155 Session Restore: 45-60 minutes to open a session
373151 Diagnostic Assistant: License Test run from Diagnostic Assistant hangs
373275 DSG Log Counter: Use the environment variable
LGC_DSG_LOG_COUNTER to increase the DSG log counter.

Geological Interpretation
338996 Log Curve Display Properties: The dialog box invoked by clicking the
Parameters button in the Log Curve Display Properties dialog box needs to be
made modal
361361 Correlation View: Correlation View restore time can be slow.
367508 Merging Well Lists: Merging well lists from Well Data Manager does not work.
368186 Mapping: Unit issue with horizon generation in Calculator. Also a tolerance
problem with surveys in Calculator.
369946 Dipmeter Display: Display performance of dipmeter data in a Cube.
371489 Well List Display Properties: Well List display properties using only non-null
attributes very slow.
371834 Curve Fill in a Shared Session: User encounters a crash in the Curve Fill
colormap code after restoring a shared session.

10ep.3.03 Release Notes Page 49 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

372275 Geoshaper Interpretation: Unusable performance for Geoshaper point

interpretation in a map
373821 Sessions: Phantom grids appear in sessions with corrupted Grid and
Contours.
372314 Curve Fill: The Curve Fill Manager is not clearing up its listeners properly.
Opening and closing views causes the view-level services collection to
become corrupted and will generate null-pointer exceptions.
373989 Curve Fill in Restored Sessions: Class Cast Exception in the Curve Fill
Manager after restoring a session

Geophysical Interpretation
358289 Mistie Correction with Private Interpreters: When a mistie shift set is owned
by a public interpretation ID and is subsequently updated by a user using a
private interpretation ID, the misties ownership is shifted to the private ID,
which prevents public users from editing the mistie set in the future. The
solution is to preserve the interpretation ID after updating the shift header
table.
366868 Horizon Performance: It takes 20 seconds to load/display horizon data when
stepping in a section.
369454 Multiple Users: Application hangs when multiple users are interpreting fault
polygons.
370053, 370413 Horizon Tracking: Area Track seems to hang when two users are running at
the same time.
370722 2D Seismic Priority: 2D seismic priority is working in reverse using higher
values as highest priority instead of as lowest priority.
371154 Horizon Interpretation: Incorrect volume is used when using auto-track for a
2D horizon.
371309 Horizon Interpretation: DecisionSpace crashes after toggling on Horizon.
Resolution also improves other workflows.
371722 Horizon Deletion: Horizon is not deleted from Section view when it is deleted
in Map view.
372717 Horizon Interpretation: Application experiences a hotspot crash while
stepping an arbitrary line in a section.
372752 Well Tooltips: Well tooltip does not include information about the Active
Synthetic, Active T/D, and Shift value.
373202 Shared Memory: Application freezes every 55 seconds with 4 or more shared
memory volumes are loaded.
373868 Fault Segments: Single point fault segment cannot be deleted.
373989 Curve Fill with Restored Sessions: Class Cast Exception occurs in the
Curve Fill Manager after restoring a session.
374091 Section Line Rotation in Maps: Application crashes after rotating a section
line in a map and writes numerous errors to the log file.

10ep.3.03 Release Notes Page 50 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

374253 Fault Contours: Fault contour is not updated in a Cube and a Map when
editing the segment in a Section and a Map.
374554 Section Panel Display for 2D Lines: Selecting point-to-point mode across
multiple 2D lines results in extra panel dividers in the middle of the lines.
960007 (PS) Bookmarks: Bookmark backward/forward icon is always disabled.

GIS
369419 Session Sharing: Restoring data with SDE data gives an exception.
370217 WMS Servers: Various WMS Servers do not render in DSG but work in the
GIS Map.
371483 GIS Map WMS Performance: WMS re-projecting to non standard CRS is
slow.
371485 GIS Map: Many of the map services in WMS fail to re-project correctly or
cannot be rendered after CartoSnap in GIS Map
374400 Restoring Data with WMS Servers: WMS data is not restoring and
connections have issues for new sessions.

Velocity Modeling
367791 Model Building: Velocity models not rebuilding properly when the input
framework has been changed in-between builds

Installer
373033 Installation Errors: Resolved problems with memory settings and other
issues related to installing the application from an image.
373199 Bundle File Names: Allow for some variation in the name of the
product_bundle file.

OpenWorks
368339, 369054, Well Data Manager Fixes: Various defect fixes to address launching, hanging,
369076, 369391, and performance issues.
369578, 369716,
370362, 370368,
371173

Well Planning
368020 Precision Target Calculations: Precision Target calculations and reporting
error.
370429 Saving Data: Disappearing Stubs when saving Well Planning Projects.
370945 Saving TD Curves: TD Curves are shifted when saving well plans to
OpenWorks.
372805 Scenario Saving: Save as OpenWorks Scenario gets insertion exceptions.
372810 Scenario Saving: Saving a Well Planning scenario to a different location with
the same name causes problems.

10ep.3.03 Release Notes Page 51 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

373173 Turn Point Corruption: Well Planning needs to fix corrupted turn points upon
adding them to a Well Plan.
373315 Target Geometry: Saved Targets could not have more than one geometry.
Now targets will allow more than one geometry, allowing Drillers Targets to be
associated.
373325 Custom Reports: User-defined custom reports not working correctly.
373467 Extracting Dip from Surface: Option to extract dip from surface while picking
targets on surfaces has been lost.
373472 Kickoff Point: Well Planning is resetting user-supplied kickoff point
373540 Creating New Targets: Option to add to current plan missing from Create New
Target

10ep.3.03 Release Notes Page 52 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in Previous 10ep Releases

The following section lists defects that were fixed in previous patches and releases of
DecisionSpace Geosciences.

10ep.3.x
Fixed Issues in 10ep.3.02
Fixed Issues in 10ep.3.01
Fixed Issues in 10ep.3
10ep.2.x
Fixed Issues in 10ep.2.05
Fixed Issues in 10ep.2.04
Fixed Issues in 10ep.2.03
Fixed Issues in 10ep.2.02
Fixed Issues in 10ep.2.01
Fixed Issues in 10ep.2
10ep.1.x
Fixed Issues in 10ep.1.01
Fixed Issues in 10ep.1

10ep.3.03 Release Notes Page 53 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in 10ep.3.02

This section explains issues that have been fixed in DecisionSpace Geosciences 10ep.3.02.

Note: Defects entered in PeopleSoft are appended with (PS). Defects listed using Microsoft
Visual Studio Team Foundation Server numbers are not appended. Whenever possible, both
numbers of the defect are reported.

For support, contact: http://css.lgc.com/InfoCenter/index?page=home

Defect ID Summary

General
370405 Log File Environment Variable: The environment variable
LGC_LOGS_HOME has been exposed. This variable lets you set the location
to create DecisionSpace Geosciences application log files. Keeping log files
on local/fast drives can improve the applications performance.

Note: On Linux the variable value cannot have spaces, and URIs may not
work as expected. Additionally, the remote location needs to be mounted.

DecisionSpace Petrophysics
366527 Data Display: Data is missing for irregular data due to floating point
conversion errors.

Dynamic Frameworks to Fill

364767 Workspace Display and Stability: The Dynamic Frameworks to Fill
workspace intermittently displays a blank workspace, freezes, or has other
stability issues after installing 10ep.3.

Geological Interpretation
364783 Accessing and Displaying Raster Log Data: Accessing raster log data can
tale a long time or make the application appear to hang because the
Shared_Log_Images folder for raster logs is not using relative paths from
OpenWorks.

Geophysical Interpretation
317226 Z Value Display: Z values are not registering for surfaces displaying in a map.
They return a constant value.
363185 Shared Memory: Shared memory dialog box is causing a slowdown in the
session.

Well Planning
367005 Target Editing Performance: There is a performance issue when dragging
targets in real time. The issue has been addressed by adding a check box to
turn off real time target dragging so that targets will not show movement until
the mouse button is released.

10ep.3.03 Release Notes Page 54 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in 10ep.3.01

This section explains issues that have been fixed in DecisionSpace Geosciences 10ep.3.01.

Note: Defects entered in PeopleSoft are appended with (PS). Defects listed using Microsoft
Visual Studio Team Foundation Server numbers are not appended. Whenever possible, both
numbers of the defect are reported.

For support, contact: http://css.lgc.com/InfoCenter/index?page=home

Defect ID Summary

General
356531 Unit Conversion in Property Models: Error logs indicate the surface created
from property modeling may not be creating the correct units.
359660 User-Defined Data Units: When displaying DecisionSpace Petrophysics log
curves in DecisionSpace Geosciences, user-defined units are ignored.

DecisionSpace Petrophysics
358443 OpenWorks 10.3 Connector Issue with Curve Creation: Irregular curves
with the prefix Irr are created when using the OpenWorks 10.3 Connector.
358455 DSIS 10.8 and OpenWorks Connector Issues with Saving Wells: Not able
to save wells with DSIS 10.8 and OpenWorks 10.3 Connectors.
362070 Drag and Drop with Curve Sets: Drag and drop a curve set into the
workspace generates error messages.
362742 DSIS Issue with Acoustic Waveform Processing: Acoustic waveform
processing does not work for DSIS projects.
362798 Adding Wells to Correlation: Errors related to DSIS are encountered when
you add wells from DecisionSpace Petrophysics into a Correlation.
363130 Cartographic Conversion: Unable to save wells in a project.

Dynamic Frameworks to Fill

350531, 356963 Refresh Issues with Multiple Interpreters: There is a refresh problem if two
interpreters are interpreting the same Framework simultaneously.

Examples of refresh issues include displaying Attribute Fills that use log curves
and displaying intersection edits made while working with a static Framework
is static.
356530 Framework Display with Restored Sessions: Framework does not display
correctly in a Map or Cube in a restored session.

10ep.3.03 Release Notes Page 55 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

357033 Interpreter Permissions with Sessions: Interpreter B adds a Framework

created by a private interpreter (Interpreter A) to a session. (Interpreter B does
not have interpret permission to Interpreter As Framework.)

The Framework created by Interpreter A restores correctly in Inventory. When

Interpreter B removes that Framework from the session and then adds it back
into the session, the Framework does not restore properly.
359097 Adding Frameworks to a Session: The application shows an unhandled
event loop exception if a Framework is added to the session using the Green
Plus icon to open the Add Data dialog box.

Earth Modeling
362235 Multivariate Data Analysis Licensing: Multivariate Data Analysis needs to
be able to run using the DSBASEPLUS license.

Geological Interpretation
359918 Pick Performance: There is approximately a 4 second delay after adding a
pick to a well in Correlation before another pick can be added when log curves
exist in the wells.
959427 PS Dragging Well Planning Targets: Slow mouse movement when dragging
targets in Well Planning 10ep.2.
959450 PS Cube Display Performance for Well Planning Targets: Displaying well plans
in Cubes affect performance when targets are moved in Maps.

Geophysical Interpretation
None Survey Priority: Error in persistence of survey priority.
333353 (958505 Color Bar Display in Sections: A random set of color bars displays in
PS) Sections.
340784 (958652 Adding Attribute Seismic Files into a Session: Loading an attribute volume
PS) into a session causes another volume to also be loaded even if it was not
selected.
346156 2D Horizon Display Performance: Displaying a 2D horizon in a Map is slower
in 10ep.3 than in 5000.10.6 (Linux).
348483 Seismic Correlation: After switching to 2D survey mode, the Reference/
Target highlighted in the Section header is locked in the first two panels.
352857 Seismic Attribute Display: When more than one seismic volume is displayed
in multiple Sections, if you change an attribute that contains a color bar/scale)
in one Section, and then display another Section with a color bar, the second
color bar is reset.
357701 2D Seismic Priority: 2D seismic priority uses a high number instead of a low
number for priority when changes are made to the priority order.
357884 Shifting Seismic: Activating the Shift 2D Line/3D Survey icon does not turn off
interpretation mode.

10ep.3.03 Release Notes Page 56 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

358064 Horizon Tracking in Cubes: Deadlock when running Area Track with Track
Immediately option enabled in a Cube.
358237 Seismic Balance: Gain value is not persisted correctly. Returns zero even
though it is saved with a different value in the Seismic Correlation pane.
358271 (959412 Importing 5000.10 Sessions with 2D Lines into DecisionSpace
PS) Geosciences 10ep: 2D Lines are not selectable in Maps when sessions from
DecisionSpace 5000.10 are restored in DecisionSpace Geosciences 10ep.
358468 (959458 Volume Blending: Seismic volumes created using SpecD and the
PS) DecisionSpace Geosciences Volume Composer cause the Map editor to
hang.
359291 Horizon Saving: DecisionSpace Geosciences hangs while saving a horizon
copy with processing history open.
360467 2D Seismic Priority in Restored Sessions: 2D seismic priority is incorrectly
flopped and the wrong files are clipped when restoring a 5000.10.0.06 session
in 10ep.3.
362872 Section Selection: Extra 2D seismic file auto-loaded when selecting section
from a map.
363540 Session Data: Cannot add multi 2D seismic data into session.
364145 Dragging Panel Boundaries (Linux): When dragging the panel boundaries in
overlapping surveys there are odd exceptions coming in the log. Sometimes
when I save the session and restore and drag the boundary, on Linux, the
application crashes.
959752 PS Fault Performance: Session unresponsive after loading 14000 faults into
session.
959753 PS Fault Performance: Exception encountered when displaying a Line of Section
(LOS) or stepping section with many fault
959754 PS Static Shift: Exception encountered in reading static shift in a Line of Section
(LOS) with 14000 faults and 100 horizons.
959755 PS Map and Section View Editors: Exception encountered in reading 2d seismic
file when closing the Map and Section View Editors.

GIS
345791 Identity Tool for Spatial Filter Query: When using the Identify tool in DSG on
a spatial filter query layer, nothing happens and the log file shows an exception
in the log file.
348347 Opacity Settings for Print Preview: Opacity settings (other than 100%) for
GIS shapefiles are not honored in Print Preview.
352225 Data Saving: Exporting from a shapefile to a Geoshaper from a GIS Map does
not write attribute data to the project database.
355354 Layer Ordering in the SDE Database: When multiple SDE layers are added
at once, the layering is not correct in the GIS Map.

10ep.3.03 Release Notes Page 57 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

357074 Well Plan attributes in Geoshapers: Well Plan attributes in Geoshapers were
not being properly populated when exported as a shapefile.
357350 GIS Layer Properties Dialog Box (Windows 7): The GIS Layer Properties
dialog box does not display if opened by New Window> GIS Map
(2DNavigation). (Window 7)

Grid and Contour

353171 (959073 Grid to Horizon Saving: Saving a grid as a horizon causes the horizon data to
PS) be scrambled. Problem saving a grid as a horizon.
364053 Launching Grid and Contour from a Depth Grid: Unable to launch Grid and
Contour from a Depth grid using a right-click (MB3) menu.

Installer
None Support Assistant Folder in the Installer: The Support Assistant needs to be
updated in the DecisionSpace Geosciences installer.
350461 G1 Installation: Incompatible version of OpenWorks detected.

Workaround:
Install OpenWorks 5000.10.3.0.
Install OpenWorks 5000.10.5.0
Install DSG 10ep.3.01 from the executable in the support folder.
361827 G1 Installer: Include Seismic Analysis in the G1 bundle.

OpenWorks
359291 Session Lockup: Apps hang while loading and displaying a 2D line list and
1,000 faults to a session (Windows 7).
361636 Well Data Manager Opened Inside DecisionSpace Geosciences: Error
log details will not be written in the log file after launching Well Data Manager
from inside 10ep.
361892 Velocity Model Construction with Differing CRSs: Velocity model
construction using a static Framework fails if the CRS of the Project Database
is different from the Interpretation Project.

Seismic Analysis
358576 Synthetic Seismogram Display: Synthetic seismogram not displaying
along wellbore path with Project Datum above the wells KB.
Seismic Attributes
357861 Volume Math: Volume Math cannot run on shared memory volumes.

Velocity Modeling
324742 (957998 Velocity Model Display: Velocity models improperly display in a Map view
PS) when the view is zoomed.
357609 Saving Grids: Saving a grid created in GEM Property Modeling to OpenWorks
is not properly handling a different measurement system.

10ep.3.03 Release Notes Page 58 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

357612 Gridding of Structural Surfaces: When correcting structural surfaces with

the GEM Property Modeling tool, the output surface domain is UNKNOWN
instead of TIME or DEPTH.
358269 Model Construction: The layer-cake gradient computation for layers beyond
the first layer was using the wrong depth-Z value for depths beyond the first
layer.
363300 (959857 Opening Depth Team Express: Depth Team Express will not launch when
PS) LGC_DATA_HOME is set to a remote server.

Well Planning
357568 Hiding Sites in Maps: DecisionSpace Geosciences hangs after using a
group selection in the Well Planning tree to hide sites in a Map.
358275 Mouse Performance: Slow mouse movement when dragging targets in Well
Planning.

10ep.3.03 Release Notes Page 59 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in 10ep.3

This section explains issues that have been fixed for DecisionSpace software release
DecisionSpace Geosciences 10ep.3.

Note: Defects entered in PeopleSoft are appended with (PS). Defects listed using Microsoft
Visual Studio Team Foundation Server numbers are not appended. Whenever possible, both
numbers of the defect are reported.

For support, contact: http://css.lgc.com/InfoCenter/index?page=home

DecisionSpace Base Fixed Issues

General Usability and Performance Fixed Issues

Defect ID Summary
302362 (956656 PS) Point to Point Display from 3D Grids: Extracting a Section probe from a
3D Earth Modeling grid shows discontinuities in a Section.
302541 (956686 PS) Session Restore with GIS SDE Data: Restoring some sessions that
contain GIS SDE data takes a very long time to parse SDE layers in the
Add Data dialog box.
316875 (957657 PS) ZGF in Inventory: ZGF features in Inventory continue to display in a Map
despite being checked off.
322042 CGM Montage: The CGM Montage application aborts when changing
paper size during file print.
327061 (958137 PS) Online Help: Help lists incorrect location for the Diagnostic Assistant.
329974 (958230 PS) Network Settings: Closing and reopening DecisionSpace 10ep.2 does not
save network settings.
331808 (958344 PS) Installation: Problem installing DecisionSpace 10ep.2 with DecisionSpace
10ep.1.
332170 (958383 PS) GIS Network Connection: GIS network connection error in
DecisionSpace.
340691 (958637 PS) Export: Unable to export a Fracture Network with Fracman format.
343237 (958699 PS) Installation Guide: Installation Guide gives the wrong information for Print
Preview variable (DS_PLOT_CGM_DIR).
352037 (958977 PS) Incorrect Image: The Georeference tab displays the wrong icon.

Calculator Fixed Issues

Defect ID Summary
None listed at this time.

10ep.3.03 Release Notes Page 60 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Data Analysis Fixed Issues

Defect ID Summary
None listed at this time.

Geomechanics Fixed Issues

Defect ID Summary
None listed at this time.

GIS Fixed Issues

Defect ID Summary
291010 Identify Does Not Work for Layers Other Than the Top Layer: If you have
data on top of each other and are using the Identify Tool in the GIS Map editor,
the Identify Tool now identifies data on all the layers.

Multivariate Analysis Fixed Issues

Defect ID Summary
299950 Performance: Computing new correlation matrix is consuming all free
memory.
324517 After saving PCA or FA, the function on the existing plots is not working
properly (for example, you cannot change the XYZ , color, rotation on the
plots).

Project Designer Fixed Issues

Defect ID Summary
None listed at this time.

10ep.3.03 Release Notes Page 61 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

DecisionSpace Earth Modeling Fixed Issues

Defect ID Summary
308042 Facies & Petrophysical Update: Takes about 5 minutes to get the simulation
completion windows after the progress bars close.
315830 Multi-User: User B can delete User As 3D grid from SSD even though there is
a .lck file in the flat file area.
TC 287520
321789 Facies and Petro sim update using inside grid subset created from X range
says subset is not contiguous.
TC 304918
323420 1.8X slower (174.56secs vs 95.26secs) Displaying non-neighbor connections
of 3D grid on 10ep is slower than 5k10.06 (ResSim01, 02, 03) (Linux).
TC 230286
323440 (Linux Only) Extract K Layer as Horizon window is displayed incorrectly on
Linux 6.6.
324374 In Earth Modeling perspective views, on closing a child confirmation dialog
from the X button at the top right corner, the dialog closes. However, the
changes get saved.
325661 Earth Modeling: Grid bounding box can't be disabled if 3d grid is removed from
the session.
325998 Rescue model exported from Petrel cannot be imported.
326871 When running volumetrics again, without any changes in any parameter, the
graphical results show different
332920 Post Processing - Static Volumetrics Calculations - Exception during run and
never finishes
333153 NTG Normal or Log Normal models give zero for in place hydrocarbon
volumes

Dynamic Frameworks to Fill Fixed Issues

Defect ID Summary
304326 Issue when using very large minimum thickness values is fixed.
305086 Proportional conformance works properly when surfaces cross.
305396 Improvements when using very large surfaces with the least squares gridding
algorithm.
308546 Fixed an issue where adding new sources to a framework would create
UNKNOWN entries in the global sources panel.
314809 Improved fault offsetting at the edges of surfaces.
316903 Fixed issue around displaying attribute maps using anisotropic kriging gridding
algorithm.
322085 Edits to log curves used in attribute fills now trigger a framework refresh.

10ep.3.03 Release Notes Page 62 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Defect ID Summary
324527 Surface-fault intersections in cube view are now rendered more accurately.
350700 Fixed an issue where removing Framework Data Filter may corrupt surface
AOI.
352328 Unnecessary Framework refreshes are no longer seen when OW polygon type
or line color is changed.
352480 When any Framework objects are saved to OW data types, the Geoname field
will now be set correctly.
353066 Under certain IP and CRS combinations, static model compartments could
become corrupted. This has been fixed.

DecisionSpace Fracture Productivity Fixed Issues

Defect ID Summary
For information on enhancements, fixed issues and known issues for
DecisionSpace Fracture Productivity Plug-In, please consult the
DecisionSpace Fracture Productivity Plug-In Release Notes.

DecisionSpace Geology Fixed Issues

Defect ID Summary
292786 Cursor Tracking: Tracking in Correlation View (MD) does not follow well
trajectory in the Section View window. Communication between the DSG
correlation window and other views
296699 (956316 Z Scale in Grid and Contour Grids: Data points automatically created with
PS) Grid and Contour have a flipped Z Scale.
307520 Zone Data: Performance issue possible. First time posting Zone Data was
terribly slow.
324098 Production Data: In the Geoscience perspective, DSG would hang when
adding Cumulative Production Data to session for specific well lists
329686 Well Spot: Resolved annotation usability inconsistencies
331428 Well Spot: Annotation labels are displayed for null zone data values. When
posting zone data annotation, if the zone value was null, its label would display
when the label was selected for
332249 (958390 Merged Horizons in Grid and Contour: Merged 3D horizon output shifted
PS) with respect to input data
332748 (958436 Curve Fill: Exception was found when user would try to create a new Curve
PS) Fill

10ep.3.03 Release Notes Page 63 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

916336 PS Correlation View: Missing Pick Qualifier as pick annotation option

955081 PS Raster Log Issue: Related to SHARED_LOG_IMAGES with more than 3
million files. if "SHARED_LOG_IMAGES" is set to a directory with more than 3
million files, certain operations such as assigning a new raster to a well in
DecisionSpace were painfully slow and/or unresponsive.
355732 (959188 Curve Fill: When fault gap is applied to a well with curve fill, the fill below the
PS) gap disappears.

Horizontal Well Correlation (Geosteering) Fixed Issues

Defect ID Summary
None listed at this time.

Petroleum Systems Fixed Issues

Defect ID Summary
For information on enhancements, fixed issues and known issues for the
Petroleum Systems Plug-in, consult the Petroleum Systems Plug-in Release
Notes.

Structural Modeling Fixed Issues

Defect ID Summary
None listed at this time.

Wellbore Analysis Fixed Issues

Defect ID Summary
None listed at this time

Zone Manager Fixed Issues

Defect ID Summary
None listed at this time.

10ep.3.03 Release Notes Page 64 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

DecisionSpace Geophysics Fixed Issues

Defect ID Summary
163768 Auto Track and Auto Dip Parameters: Store horizon parameters for Auto
Track and Auto Dip parameters in session file so they are applied when the
session is reopened.
300297 Synthetic Display: Synthetics not displaying consistently in Depth-Depth
sessions and/or workflows.
306991 Cross-correlation Volumes: User needs a tool where he can do a cross-
correlation between volumes.
315337 Horizon Display: When you have a 3D survey that has the corner point
coordinates, the horizon picked in the Section view does not align with the
Section2 display in the Map view.
329381 Seismic Stepping: Seismic is not refreshing in the Section view when
stepping with the arbitrary line.
333351 Seismic Priority List: Seismic Priority List Reordering does not do anything.
340482 Seismic Attributes: Seismic attribute on-the-fly in Section Editor is only
enabled if the volume Attribute = Amplitude.
344026 Section Header Display: Multiple survey names in the Section view header.
349427 Wiggle Displays: There are some overlaps and gaps in some wiggle displays
when you create multi-panel/2d displays.
349584 Correlation Coefficient: The Correlation coefficient is higher than 100 when
zooming in to Section view.
350302 Seismic Stepping: DecisionSpace crashes when stepping inline and
crossline.

Seismic Analysis Fixed Issues

Defect ID Summary
182909 (909427 PS) Synthetic Generation: Would like reflection coefficient to be displayed as
spikes, not as curve.
263062 (953876 PS) Well Data: Add option to display all picks in same color
331285 (958289 PS) Well Tie Workflow: Option to save TD table with user-specified time sample
interval.
332468 (958410 PS) Pick List: Pick list created in an interpretation project in DecisionSpace
Geosciences does not show up in Seismic Analysis (Well Seismic Fusion).

Seismic Attribute Generation Fixed Issues

Defect ID Summary
None listed at this time.

10ep.3.03 Release Notes Page 65 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Velocity Modeling Fixed Issues

Defect ID Summary
181008 Allow 3D velocity model creation from interval velocity grids.
299814 VELF file strictly follows VELF format cannot be imported.
252581 Expanded decimal precision of Scale factor
276086 Model version warning as opposed to abort
322189, 248290 Added instructional warning when unable to use picks when the strat column
has not been assigned.
303329, 279574 Unable to move points in Time Depth curve editor.
348390 Depth Team Express plugin not compatible with Oracle 12c on Linux.
957638 DepthTeam Express: Unable to save velocity model in DS5000.10.3
embedded database.
959420 DepthTeam Express: Error saving velocity volume to OpenWorks in 10ep2
with Data Save failed permission error.
2287185 DepthTeam Express: Unable to create new velocity model in DTE if DSG/DTE
is installed as root user on Linux but launched as non-root user.

Property Modeling Fixed Issues

Defect ID Summary
None listed at this time.

Volume Visualization Fixed Issues

Defect ID Summary
None listed at this time

DecisionSpace Log Calculator Fixed Issues

Defect ID Summary
None listed at this time.

DecisionSpace Microseismic Fixed Issues

Defect ID Summary
293378 Errors encountered indicating an instance already exist when attempting to
create or save a horizontal.
332329 Copy Fault Center Lines causing session crash.

10ep.3.03 Release Notes Page 66 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

DecisionSpace Natural Fracture Network Fixed Issues

Defect ID Summary
308916 Network Simulation: Run button is still selectable if Use secondary data is
toggled on but no secondary data was selected.
314810 NFN Slice: After making a slice the fracture network resets sometimes and
other times the network does not reset.
315846 Generated fracture network does not extend to the boundaries of the rotated
bounded region in the x-y direction.
322294 Help is not linked in the Upscaling Tab.
324644 Secondary Data: Interval green check remains active even when 2D surfaces
are removed from the session.
324647 Import/Export: For Fracture Networks created by the NFN workflow, specific
properties such as aperture, permeability, porosity, dip angle, dip direction,
fracture length, fracture width, interval ID, and fracture set ID are lost when
exported and re-imported.
325050 Exporting an OpenWorks Natural Fracture Network: Exporting an OW NFN
after making OW slices (rotated and non-rotated) on the same network, is
causing an exception and an export error. A workaround is to Start a new
session > Load in the OW NFN > then export it, or dont make slices in the OW
FN, and it will export just fine.
338991 Incorrect fracture network geometry creation.

DecisionSpace Well Planning Fixed Issues

Defect ID Summary
958874 DS Well Planning Performance Issues when saving WBP file to a network
drive
957890 Drag/Move targets results in additional shift from intended cursor location.
958134 DSR when importing targets, non-numerical value in numerical only field
959091 SaveAs OpenWorks well does not update the survey history
957178 Project coordinates have changed after restoring session
TFS 326285 Site Node with no Plan - Deleting a Site and then undoing it can result in a site
node in the Inventory that has no plans
TFS 326316 Duplicate Items in Inventory - Duplicate items seen in Well Planning inventory
tab when Refresh Well Planning Scenario

10ep.3.03 Release Notes Page 67 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in 10ep.2.05

This section explains issues that have been fixed for the DecisionSpace Geosciences release
10ep.2.05.

Note: Defects entered in PeopleSoft are appended with (PS). Defects listed using Microsoft
Visual Studio Team Foundation Server numbers are not appended. Whenever possible, both
numbers of the defect are reported.

For support, contact: http://css.lgc.com/InfoCenter/index?page=home

Defect ID Summary
960510 (PS) Private Interpreters: Application hangs while using a second interpreter ID
and performing horizon interpretation area track.
358799 Color Bar: The Color bar Symmetric mode is not working properly.
359435 Shared Memory Stability: Application crashes when loading shared memory
volume during the session restore.
367947, 369454 Multiple Users: Application hangs when multiple users are interpreting fault
polygons.
370413 Horizon Tracking: Area Track seems to hang when two users are running at
the same time.
371309 Horizon Interpretation: DecisionSpace crashes after toggling on Horizon.
Resolution also improves other workflows.
372717 Horizon Interpretation: Application experiences a hotspot crash while
stepping an arbitrary line in a section.

10ep.3.03 Release Notes Page 68 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in 10ep.2.04

This section explains issues that have been fixed for the DecisionSpace Geosciences release
10ep.2.04.

Note: Defects entered in PeopleSoft are appended with (PS). Defects listed using Microsoft
Visual Studio Team Foundation Server numbers are not appended. Whenever possible, both
numbers of the defect are reported.

For support, contact: http://css.lgc.com/InfoCenter/index?page=home

Defect ID Summary

General
355523 Session Stability if Domain is Changed: The software throws an exception
when you change the Correlation editor domain from MD to TVDSS if the
automatic session backup has been engaged.

Dynamic Frameworks to Fill

348395 Frameworks from Horizons: Frameworks (in a projected CRS IP) created
from horizons appear in the wrong location.
353066 Time-Depth Conversion with Framework Compartments: Framework
compartments become dysfunctional in certain Interpretation Project/
Cartographic Reference System combinations. Using Time Frameworks for
velocity modeling in certain IP/CRS configurations does not perform Time-
Depth conversions correctly.

Geophysical Interpretation
959752 PS Fault Performance: Session unresponsive after loading 14000 faults into
session.
959753 PS Fault Performance: Exception encountered when displaying a Line of Section
(LOS) or stepping section with many fault
959754 PS Static Shift: Exception encountered in reading static shift in a Line of Section
(LOS) with 14000 faults and 100 horizons.
959755 PS Map and Section View Editors: Exception encountered in reading 2d seismic
file when closing the Map and Section View Editors.

10ep.3.03 Release Notes Page 69 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in 10ep.2.03

This section explains issues that have been fixed for the DecisionSpace Geosciences release
10ep.2.03.

Note: Defects entered in PeopleSoft are appended with (PS). Defects listed using Microsoft
Visual Studio Team Foundation Server numbers are not appended. Whenever possible, both
numbers of the defect are reported.

For support, contact: http://css.lgc.com/InfoCenter/index?page=home

Defect ID Summary

General
358093 Session Import: Application deadlocks when importing a session containing
data that shares and locks well lists.
358271 Session Importing with 2D Lines: 2D Lines are not selectable in Maps in
sessions that are imported from 5000.10 to 10ep.

Dynamic Frameworks to Fill

348395 (958798 Frameworks Created from Horizons: Frameworks created from horizons
PS) appear in the wrong location.
353066 Time-Depth Conversion with Framework Compartments: Framework
compartments become dysfunctional in certain Interpretation Project/
Cartographic Reference System combinations. Using Time Frameworks for
velocity modeling in certain IP/CRS configurations does not perform Time-
Depth conversions correctly.

Geological Interpretation
358462 (959451 Surface Pick Thicknesses Calculations: In Correlation, when you right-click
PS) on a well with picks, the ability to see a spreadsheet of TVD/TST thicknesses
between surface picks no longer works.
959602 PS Pick and Log Curve Display Performance in Correlation: Delay after
adding a pick to a well in Correlation before another pick can be added when
log curves exist in the wells.

Geophysical Interpretation
357701 2D Seismic Priority: 2D seismic priority uses high number instead of low
number for priority when changes are made to the order.
358064 Horizon Tracking in Cubes: Deadlock when running Area Track with Track
Immediately option enabled in a Cube.
358468 Volume Blending: Error blending volumes in map view.

10ep.3.03 Release Notes Page 70 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Velocity Modeling
324742 (957998 Velocity Model Display: Velocity models improperly displayed a map when
PS) the view is zoomed.
959420 PS Permissions: Permissions error when saving a Depth Team Express velocity
model to the database.

Well Planning
357568 Session Restore with Well Planning Sites: Saved Session -
DecisionSpace Geosciences hangs after using a group select in the Well
Planning tree to hide Sites in a Map.
358275 (959427 Mouse Performance while Moving Targets: Slow mouse movement when
PS) dragging targets in Well Planning 10ep.2.
959450 PS Cube Display Affects Moving Targets: Displaying Well Plans in Cubes
affects the performance of moving Well Planning Targets.

10ep.3.03 Release Notes Page 71 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in 10ep.2.02

This section explains issues that have been fixed for the DecisionSpace Geosciences release
10ep.2.02.

Note: Defects entered in PeopleSoft are appended with (PS). Defects listed using Microsoft
Visual Studio Team Foundation Server numbers are not appended. Whenever possible, both
numbers of the defect are reported.

For support, contact: http://css.lgc.com/InfoCenter/index?page=home

Defect ID Summary

GIS
308912 Performance: Performance issues loading GIS data.
339591 ESRI Transformations: When transform dialog box is not enabled, ESRI
transformations are not being used by default.
344378 CRS Issues with ESRI Projections: Adding a grid in a different CRS using
ESRI projections gives GPK exception error.
346042 Transformation Dialog: Default OpenWorks transformation setting is not
being picked by DecisionSpace Geosciences application.
346145 Adding Session Data: Data from the SDE server could not be added to the
session if LGC_DATA_HOME value has a slash \ on the end.
348882 CRS Issues With Special Characters: When the OpenWorks CRS has a
comma in the name, GIS data cannot be added.
349035 Session Restore with ESRI Projections: ESRI on-the-fly projection is not
being remembered when restoring sessions.

Dynamic Frameworks to Fill

348395 Framework Display Location: Frameworks created from horizons appear in
the wrong location.

Geological Interpretation
332239 Session Restore with Grids: Error restoring a session after modifying a Grid
and Contour object in another session.

Well Planning
none Engineering Notes: Engineering Notes, not previously included in
DecisionSpace Geosciences, has now been added to the application.

10ep.3.03 Release Notes Page 72 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in 10ep.2.01

This section explains issues that have been fixed for the DecisionSpace Geosciences release
10ep.2.01.

Note: Defects entered in PeopleSoft are appended with (PS). Defects listed using Microsoft
Visual Studio Team Foundation Server numbers are not appended. Whenever possible, both
numbers of the defect are reported.

For support, contact: http://css.lgc.com/InfoCenter/index?page=home

Defect ID Summary

General
312433 Display Properties: Wrong pick color shows in Section if you change the pick
color in Map.
322082 GIS - Refreshing SDE Connection: Doing an SSD refresh of SDE connection
from restore removes data from DecisionSpace Geosciences.
3222042 Zone Manager in Hardcopy: Zone Manager aborts when changing page size
during file print.
324110 Welcome Page: Video Carousel -- Only center video plays when clicked.
324647 Import/Export: Properties of Natural Fracture Network (NFN) get lost during
export and import.
325498 Platform Reporting in Diagnostic Assistant: Secondary platform supported
Linux version is not correct in Diagnostic Assistant.
325960 Display: DSPFractureProperties should support list of values.
325971 New Session Button on Welcome Page (Linux RH 7.2 KDE): Linux (RHEL
7.2: KDE only: Application crashes after clicking on New Session button.
326898 GIS - Incorrect Data Shift for CRS: A certain NAD27 Source CRS is providing
an incorrect data shift.
327182, 327193, Installation Guide and Release Notes: Various fixes to the Installation Guide
329851 and Release Notes, including correcting DSBASEPLUS license feature,
broken help links, updated information about GIS and Linux Red Hat 7.
327423 Welcome Page: Welcome Page opens outside DSG when the login link is
clicked
330027 GIS - Changing the CRS Offline: With no proxy, changing the CRS of the
offline basemap gives proxy error.

Dynamic Frameworks to Fill

317013 Performance: Change Grid cell size of 10ep is slower than 10.06

10ep.3.03 Release Notes Page 73 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

325091 Framework Performance: When creating a Framework in 10ep.2 with

hundreds of attribute fills, the refresh time for generating those fills may be
slower than the same operation in 5000.10.0.06 by up to a factor of 2X.

Earth Modeling
326871, 327043 Volumetric Calculations: When running volumetrics again, without any
changes in any parameter, the graphical results appear to be different.
329573 Natural Fracture Network: Error while running Natural Fracture Network
(NFN).

Geological Interpretation
324420 Grid and Contour Interpretation: Cannot delete second contour node from
Grid and Contour Interpretation.
324656 Curve Fill with Raster Logs: Rasters display on top of curve fill regardless of
data display order.
325237 Grid and Contour Interpretation: Contour Info. in Grid and Contour
Interpretation is showing more contours than are present in the grid.
327096 Grid and Contour Interpretation: When user interprets a new contour in a
TVDSS session with Grid and Contour in TVD, values recompute as opposite
signs.
331428 Zone Data Annotation: Annotation labels are displayed for null zone data
values, making a very messy display.
332471 (958415 StratWorks Grids with Grid and Contour: StratWorks grids with OpenWorks
PS), 332473 Grid IDs that reference Contour Parameters cannot be added to the session
(958419 PS) using Grid and Contour.
333156 Zone Attribute Annotation: Text Zone Attributes show up as Nulls.
333210 Zone Manager Curve Data Statistics: Curve Data Statistics is not honoring
coverage cutoff in some cases.
332748 Log Curve Fill: Log Curve > MB3 Display Properties > Edit Log Curve Fill >
Create New Curve Fill cannot add new record.

Geophysical Interpretation
300656 Horizon Display: Horizon is incorrectly displayed in a map when 3D survey is
reprojected.
303985 Horizon Tracking Min/Max: Visible Min and Max of a newly tracked horizon
appear as -1.0 and 1.0.
323884 Horizon Display Color: Changes to the horizon color in the task pane are not
updated in Inventory.
324306 Domain Conversion: Dragging and dropping depth seismic to TWT in a
Section causes the application to crash.
326535 2D Line Shift: Application crashes when you select the Shift 2D Line icon in
Section view.

10ep.3.03 Release Notes Page 74 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

958537 (PS) Shared Memory: Shared memory volume service is not found in the App-V
container.
958551 Section Stepping Performance: Section stepping much slower than
expected.

DecisionSpace Petrophysics
326616 Session Launching: Default set get 0.5 as step and not 0.1524 after
launching a DecisionSpace Petrophysics session set in Metric in DSG.
327081 Batch LAS Loader: Auto-Extend well option only extends default set not
target curve set

Well Planning
321546 Perspectives: Custom perspectives not displaying
322055 Session Restore: Restoring Well Planing session will not display the Well
Planning data.
326285 Inventory Tree: Deleting a Site, then undoing it can result in a site node in the
Inventory that has no plans
326316 Inventory Refresh: Duplicate items seen in Well Planing Inventory tab when
refresh Well Planing scenario
327058 Importing Targets: Application crashes when importing targets.

10ep.3.03 Release Notes Page 75 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

OpenWorks
324270 Project and Session Compatibility: The OpenWorks software shipped
5000.10.3.02.01 that included a fix that allows a newer project to be opened.
For example, an OpenWorks 5000.10.5 project cannot be opened by the
10.3.02 data managers without this fix.

The DecisionSpace Geosciences installer now includes the OpenWorks

5000.10.3.02.01 hotfix.

There are no changes to the owdevkit delivered with DSG; they were included
in the DSG Geoscience libraries that were shipped with DecisionSpace
Geosciences 10ep.2.

10ep.3.03 Release Notes Page 76 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in 10ep.2

This section explains issues that have been fixed for DecisionSpace software release
DecisionSpace Geosciences 10ep.2.

Note: Defects entered in PeopleSoft are appended with (PS). Defects listed using Microsoft
Visual Studio Team Foundation Server numbers are not appended. Whenever possible, both
numbers of the defect are reported.

For support, contact: http://css.lgc.com/InfoCenter/index?page=home

DecisionSpace Base Fixed Issues

General Usability and Performance Fixed Issues

Defect ID Summary
247297 Can not auto composite logs with different service names
247973 End colors not working properly with Hill shade. Enabling Hill Shading
removes the end colors settings and reverts to the default background
stetting.
273374 Casing font size not working properly in Section or Map View: If you
change the font size in the display properties dialog box, the change is not
reflected in the Section or Map. This has been fixed for Section but not
Map. A new defect, 285018, has been entered for Maps.
273476 Inventory tree items not collapsing properly: If you collapse all data
types in the Inventory tree, when you reopen a branch that has branches,
all the branches are open instead of closed.
280011 Connection to GIS server not working: If you are not connected to the
Internet, you get an error when you try to connect to an internal GIS server.
282621 Missing tooltip in Add Data dialog: There is no tooltip for the Search/
Filter icon in the Add Data dialog box.
290429 Need better error messaging: When Home directory is full, 10ep would
not start and did not give a message.
290971 Data Values Disappear From Color Map Legend When Color Map is
Changed: When you change the color map, the color map is updated but
the data values disappear from the color map legend.
294623 Error logs missing system information and environmental variables:
The system information and environmental variables were not included in
the new logs. This has been fixed.
294848 Display of surfaces slow: Display of surfaces from OW is slower in
10ep.1 compared to 5000.10.0.05.

10ep.3.03 Release Notes Page 77 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Defect ID Summary
295930 Selecting an Improper District When Creating Session: When you
create a new session you must define a District. If you select a District you
do not have access to you are prompted for a login and password. When
you click Cancel, DecisionSpace Geosciences minimizes.
302297 Diagnostic Assistant not returning Linux OS value: The diagnostic assistant
is not returning the Linux OS version. Also, the dialog box lists 5.8 as a
supported version and it is not.
302540 Shapefile color not preserved when add to session: When you change the
color of a shapefile in the GIS map then right click and add the data to the
session, the color preferences set in GIS are not used in the session.
304397 Proxy settings not honored on Linux: Proxy setting defined in the Linux
operating system are not automatically being picked up by the application.
304969 LGC_DATA_HOME not setting platform folder correctly: When you set
the LGC_DATA_HOME directory to a specific location, the platform folder
will not be placed in the new LGC_DATA_HOME directory. It will stay in the
Users home directory. Use the LGC_PLATFORM_HOME variable to set
the platform directory.
307064 Correct version not shown on the Help > About dialog box: The Help >
About dialog box showed the wrong version of the application.
307410 Diagnostic Assistant has wrong information: Incorrect information
about memory usage is incorrect. Correct supported Red Hat versions are
not shown in dialog box.
307866 Right-click option for selecting new color bar does not work: If the
directory contains a custom color bar created in Seisworks that has a .slm
extension, the right click menu does not show a list of color maps.
307868 GIS could not display WMS Layer in NAD83: EPSG code for
North_American_Datum_1983_Colorado_Zone_502_NAD83 was not
mapped correctly for WMS layers.
308124 DSG will not open
316011 Change path color to white: When path color is changed to white the white
color is not honored.
322106 Save Horizon problem is DSBASE feature not in license file: If DSBASE is
not is license file then there is a problem saving a horizon.

Calculator Fixed Issues

Defect ID Summary
None listed at this time.

10ep.3.03 Release Notes Page 78 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Data Analysis Fixed Issues

Defect ID Summary
259233 TWT domain: Polygon around attribute data in crossplot; corresponding point
sets in Map view not visible

Geomechanics Fixed Issues

Defect ID Summary
None listed at this time.

GIS Fixed Issues

Defect ID Summary
298825 SDE Connection Dialog or Map Gallery Expansion (Linux Only): Expand-
ing the SDE Connection Dialog or Map Gallery previously caused DecisionS-
pace Geosciences to crash. This has been fixed.

Multivariate Analysis Fixed Issues

Defect ID Summary
299950 Performance: Computing new correlation matrix is consuming all free
memory.

Project Designer Fixed Issues

Defect ID Summary
None listed at this time.

DecisionSpace Earth Modeling Fixed Issues

Defect ID Summary
Earth Model Flow Simulation
183436, 187608 Display Refresh: The simulation well list and perforation manager will refresh
when a grid is re-selected or wells are added to the grid after the fact.
186418, 188570, Linux Issues: Full functionality in Linux has been restored.
199109
189284 G1 License: Functional usage of DecisionSpace G1 license has been
restored.

10ep.3.03 Release Notes Page 79 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Defect ID Summary
194906 Grid Analysis Toolkit Properties: New properties created using the Grid
Analysis Toolkit are accessible for the Flow Simulation workflow.
200739 Streamlines Help Documentation: Access to the Streamlines Help
documentation has been restored.
278743, 296000 Flow Simulation Results in Inventory: Ability to load flow simulation results
into Inventory from various directories and database configurations.
Grid Analysis Toolkit
217391 Grid Analysis Documentation: Access to the Grid Analysis Toolkit Help
documentation has been restored.
306635 Method Updates: Method update stops the lock up of DecisionSpace
Geosciences when exception occurs in Scaling Calculation.
188407, 189299, Application Stability: Addressed multiple exceptions thrown as a result of
218894 missing data objects.
208470 Surface Grid Rotation: Irregular rotation of surface grids no longer occurs.
311146 Name Change for Calculation: Porosity Thickness calculation is now called
Property Thickness to more clearly identify the calculation as being able to
accommodate the thickness calculation of a user-provided property.

DecisionSpace Natural Fracture Network Fixed Issues

Defect ID Summary
None listed at this time.

Dynamic Frameworks to Fill Fixed Issues

Defect ID Summary
277331 Framework Icons: Display Order fro Framework Objects
288724 Display: Offset spikes from reverse faults
293671 Conformance Mapping: Framework surface not honoring data during
conformal mapping.
298331 Grid Definition Settings: Frameworks GUI is incorrectly setting grid definition
row/col values based on number of cells when it should be using number of
nodes.
305699 Contour Annotation: DFF contour font size is not large enough.
307296 Fault Networking and Cleaning: Surfaces are extended incorrectly up to
faults.

10ep.3.03 Release Notes Page 80 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Defect ID Summary
308578 Polygon Area of Interest: Polygon AOI in Frameworks should strictly respect
the polygon after gridding a horizon/surface pick.
315098 Polygons and Gridding: Frameworks does not clip the grid to the extents of
the polygon.
317269 Well List from Well Details: Overwriting well list using Well Details is not
triggering a FW refresh.

DecisionSpace Geology Fixed Issues

Defect ID Summary
182319 (908979 GeoShaper Performance: GeoShaper edit slows when editing a polygon by
PS) moving an existing point.
283011 (955493 Lithology Symbols: restart required to update lithology symbols.
PS)
283156 (955509 Grid and Contour Data Tab: Interactivity between the histogram and table
PS)
291216 (956010 Well Shifts: Well shifts take long time to be applied.
PS)
293839 (956137 Section Well Projection: Well TD projected onto section even if outside
PS) projection distance area.
298119 (956380 Grid and Contour 2D Horizon Conversion: Convert 2D Horizon as a Point
PS) Set not working.
298277 (956396 Pick Aliasing: Not possible to use alias name in Well Details filters.
PS)
295051 (956213 Well Details: Well Details changes with new arbline.
PS)
296576 (956303 Grid and Contour Back Interpolation: Once the grid has been renamed,
PS) back interpolation does not remember the source.
301247 (956597 Log Curve Display: Apply Immediately will not work in Lithology Fill from
PS) Display Properties.
302538 (956683 Surface Pick Aliasing: Ability to alias picks from private interpreters.
PS)
303202 (956787 Grid and Contour Histogram: Grid and Contour data histogram switches axis
PS) min/max values.
303927 (956843 Curve Fill: Curve to Curve Fill Properties wrong Boundary.
PS)
303826 (956833 Well Layout: Cannot enter well layout edit mode in Correlation view; think you
PS) are in Map view.

10ep.3.03 Release Notes Page 81 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

304506 (956934 Grid and Contour Saving Contours: When saving contours from G&C to
PS) contour file, the annotation properties are not preserved.
305452 Grid and Contour - Calculator Issues: Grid and Contour grids not working in
Calculator.
305758 (957019 Grid and Contour Grid Node Labels: Cannot change grid and contour grid
PS) node label color.
306422 (957050 Grid and Contour Visual Performance: Visual performance degrades after
PS) grid and contour has finished running.
306617 (957071 Surface Pick Filtering: Filter surface picks by selected well list no longer
PS) showing selected well list.
307288 (957158 Well Data Manager from Quick Access: Error occurs when launching Well
PS) Data Manager from the Quick Access.
309671 (957338 Grid and Contour Null Handling: Grid and Contour treating null surface picks
PS) as valid values.
316933 (957664 Time Depth Performance: Time Depth Shift - performance on saving.
PS)
307796, 322317 Contour Interval Limit: Remove contour interval limit
(957816 PS),

Horizontal Well Correlation (Geosteering) Fixed Issues

Defect ID Summary
None listed at this time.

Petroleum Systems Fixed Issues

Defect ID Summary
None listed at this time.

Structural Modeling Fixed Issues

Defect ID Summary
None listed at this time.

Wellbore Analysis Fixed Issues

Defect ID Summary
None listed at this time

10ep.3.03 Release Notes Page 82 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Zone Manager Fixed Issues

Defect ID Summary
None listed at this time.

DecisionSpace Geophysics Fixed Issues

Defect ID Summary
165626 (908078 Seismic Display: Seismic displays step with unequal 3D seismic survey
PS) inline/xline spacing.
285562 Automated Fault Interpretation - Fault Snap: Able to snap multiple
segments without closing Snap Faults dialog
286923 Automated Fault Interpretation - Likelihood Generation: Likelihood
attribute generation work on CPU.
292851 (956091 Seismic Probe: DSG crashes when moving shared memory probe in
PS) GeoProbe.
299214 (956482 Horizon Tracking Performance: Paint brush tracking is very slow even when
PS) using shared memory.
299215 (956483 Polygon Tracking: Track dialog for polygon track missing/disappears.
PS)
301869 Automated Fault Interpretation - Fault Tracking: Fault tracking no longer
misplaces faults when running on shared memory.
302956 (956769 Shared Memory Performance: Loading Volumes to Shared Memory makes
PS) application unresponsive.
305631 (957016 Domain Conversion with Prestack Data: On-the-fly domain conversion
PS) issues using prestack data.
306421 (957049 2D Volume Posting: 2D volumes associated with the wrong lines.
PS)
307212 (957152 Seismic Priority List: The seismic priority list of volumes cant be turned on.
PS)
307293 (957163 Multi-panel Selection: Point to point seismic selection not working correction
PS) when using MB3 > Break.
308128 (957252 2D Seismic Flattening (Linux): Horizons disappear when multiple horizons
PS) are displayed and some not picked on all lines.
314617 (957452 Fault Triangulation: Fault triangulation errors when combining vertical and
PS), 307209 horizontal fault segments.
(957149 PS)

10ep.3.03 Release Notes Page 83 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Seismic Analysis Fixed Issues

Defect ID Summary
887847 Seismic Synthetic: Option to change default display properties for seismic
wiggles.
952066 Well Tie Workflow: Well Tie crashes when change wavelet that is in memory
952130 User Interface: View > Save Layout does not list previously saved layouts on
some Windows configurations.
952776 User Interface: Units are incorrect in the footer area for the Seismic Depth
(Centimeters/Second instead of Meters/cm) when launched from DSG
952777 User Interface: Seismic parameters set in the Surface Seismic track are not
remembered in the session file
953453 Installation: Well Seismic Fusion does not work with ORACLE 12
956577 Well Data: Ability to use Surface Pick List in WSF
956759 Well Tie Workflow: Ability to calibrate nodes of the synthetic to the seismic
event
956766 Well Data: Logs Color fill disturbed after changing the position of MD track in
WSF
956947 Well Tie Workflow: DSR in Well Tie workflow when copying curves between
tracks
957145 Well Tie Workflow: Launching Well Tie Synthetics from <All Wells> in DSG
crashes Well Seismic Fusion
957315 Synthetic Generation: Templates/layouts included in WSF
957317 Well Tie Workflow: Erratic behaviors in setting vertical scale in Well Tie
Workflow
957487 Well Tie Workflow: Load preferred synthetic checkbox is ignored

Seismic Attribute Generation Fixed Issues

Defect ID Summary
None listed at this time.

10ep.3.03 Release Notes Page 84 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Velocity Modeling Fixed Issues

Defect ID Summary
259702 Unit Conversion: Feet/Meters conversion issues in DepthTeam Express with
certain models.
280735, 289859 Translation and Performance: Translation and performance issues when
Import Data as Hybrid Model.
281071 T-D Curve Editor: Copy of TD table in T-D Curve Editor has zero in first Depth
entry and a non-zero value for Time.
286155 T-D Curve Editor: In certain projects, the Depth values are incorrectly
converted upon saving in the T-D Curve Editor.
295043 Interpreter Source Priority (Linux): On Linux, DepthTeam Express is not
honoring Interpreter Source Priority List when filtering Surface Picks.
297504 Interpolation: Problem interpolating shallow velocities from TD's starting at
different depths.
305466 Global Min/Max: Velocity model not applying global min/max velocity
restriction when a formation strays beyond the global range.

Volume Visualization Fixed Issues

Defect ID Summary
None listed at this time

DecisionSpace Log Calculator Fixed Issues

Defect ID Summary
None listed at this time.

DecisionSpace Microseismic Fixed Issues

Defect ID Summary
None listed at this time

DecisionSpace Well Planning Fixed Issues

Defect ID Summary
None listed at this time.

10ep.3.03 Release Notes Page 85 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in 10ep.1.01

This section explains issues that have been fixed for DecisionSpace Geosciences release
10ep.1.01

Note: Defects entered in PeopleSoft are appended with (PS). Defects listed using Microsoft
Visual Studio Team Foundation Server numbers are not appended. Whenever possible, both
numbers of the defect are reported.

For support, contact: http://css.lgc.com/InfoCenter/index?page=home

Defect ID Summary

General
287848 Zoom Issues with Task Panes: Minimized interpretation task pane restores
when area zoom map if any view has interpretation mode on.
290508 Cube Rotation with Geoshell Contours: Almost unable to rotate Cube view
with Geoshells contours displayed.
291175 Hardcopy: Error message pops up when trying to save as pdf/jpg/tif/png file.
291415 Hifi Color: Velocity model incorrectly resets to a 1.0 opacity after switching
color map.
295284 Orthographic Mode in Cube: View in Orthographic Mode works incorrectly
in Cube view.
299084 Session Import: Error message is seen on importing any 10ep session.
299965 Curve Shift: Applying Depth-Depth (DD) Curves is applying expected shift in
wrong direction.
301250 Session Parameters, Linux 7.2 Only: For the KDE environment, session
parameters cannot be set; the application crashes and shows an error.

Dynamic Frameworks to Fill

189004 (949769 Editing Multiple Minimum Thicknesses and Minimum Separations: Would
PS) like to multi-edit the minimum thickness for conformance and the minimum
separation.
295079 Bottom-up Conformance: Application crashes on setting Bottom-up
conformance for mini thickness surfaces.
299081 Saving Surfaces as OpenWorks Grids: Save surface(s) as OW Grid does
not work and shows an error in the log file.

Earth Modeling
300416 Natural Fracture Network: If set up dip direction or dip angle with truncation
value, after click Apply, all the parameters become zero.
302165 Natural Fracture Network: If set up dip direction or dip angle with truncation
value, after click Apply, all the parameters become zero.

10ep.3.03 Release Notes Page 86 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Geological Interpretation
235320 Allow Formation Volume Factor to Accept Gas Values: Fix formation
volume factor to allow gas reservoir numbers. The current restrictions are
based on oil reservoirs.
299462 Grid and Contour Crash: Grid and Contour throws a contour exception and
finally crashes DSG 10ep if a user clicking Run and calculating maps with
contours. The test example ran 34 times without exceptions; the 35th time
threw an exception; and the 36th time caused DSG to crash.
299521 Rotated Grids with Polygons in Grid and Contour: When a user puts
polygons into a rotated grid, then the resulting grid has weird blanked out
areas that do not correspond with the location of the polygons.
300668 Linux RedHat 7.2: Grid and Contour comes up blank in Red Hat 7.2.
301118 Search Results UI: Typo Attribute in the Save to Zone Manager dialog box
from Search results.
303493, 303690 Well Display: Well list displays incorrectly in Section View and Cube View
(Linux) and well depth is incorrect in TWT Domain.
304434 Contour Intervals in Grid and Contour: Contour intervals only work with
integers, but they also need to work with decimals.

Geophysical Interpretation
277673 Automatic Fault Likelihood Generation: Smooth step only smoothing in
inline direction, not xline.
295843 Volume Blending with Seismic Probe: Seismic probe volume blending is not
working for volumes that have different sizes.
296266 Fault Snap: Operator parameters need to be changed for better performance.
297914 Deadlock Issues: Swing UI access from worker thread causes deadlock
301869 Automatic Fault Interpretation: Fault tracking misplaces faults if running on a
Shared memory with inline/xline in <0.

GIS
298825 SDE Connection Window: Resizing the SDE connection window crashes
DSG. The fix is to lock the windows.

Well Planning
289426 Window Positioning: Clicking the Advanced Plan Editor icon brings the
window to the front.
296145 Well Plan Trajectory Table: The Well Plan Trajectory table remains populated
when plan is undone.
298312 Sidetrack Issues: Sidetrack issues in new Well Planning UI.
300904 Multi-layer Targeting: Multi-layer targeting with Infill issues

10ep.3.03 Release Notes Page 87 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

300905 Well Save Issues: True North, Ground Level saving to OW wells issues
300987 Unitization Boundaries: Unitization does not honor existing boundary.
301070 Linux 7.2 Issue with Multi Well Planning Tab: The Multi Well Planning tab is
blank on RHEL 7.2 with Mozilla.

10ep.3.03 Release Notes Page 88 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Fixed Issues in 10ep.1

This section explains issues that have been fixed for DecisionSpace software release
Geosciences 10ep.1.

Note: Defects entered in PeopleSoft are appended with (PS). Defects listed using Microsoft
Visual Studio Team Foundation Server numbers are not appended. Whenever possible, both
numbers of the defect are reported.

For support, contact: http://css.lgc.com/InfoCenter/index?page=home

DecisionSpace Base Fixed Issues

General Usability and Performance Fixed Issues

Defect ID Summary
164274 (873941 PS) Correlation Tool Performance: Correlation Tool is slow creating/moving/
removing polygon from view
194705 (915072 PS) Hybrid Model Performance: Hybrid models have poor performance in
Cube view display
274352 (954662 PS) Horizon Display Performance: Zoom/Pan Map displaying a horizon for
large survey shows poor performance
281240 (955377 PS) Framework QC Display Performance: Frameworks QC Maps have
performance issues

Calculator Fixed Issues

Defect ID Summary
None listed at this time.

Data Analysis Fixed Issues

Defect ID Summary
None listed at this time.

Geomechanics Fixed Issues

Defect ID Summary
None listed at this time.

10ep.3.03 Release Notes Page 89 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Multivariate Analysis Fixed Issues

Defect ID Summary
None listed at this time.

Project Designer Fixed Issues

Defect ID Summary
886932 Reporting: You cannot take a snapshot of the Color task pane when it
is docked. To undock the task pane, click the Undock task panes icon
at the top of the task pane.

DecisionSpace Earth Modeling Fixed Issues

Defect ID Summary
239423 Initializing a Framework Tab: Initialize Framework Tab didn't come back even
after removing FW Geoshell & making changes in Dynamic Framework.
253417 3D Grid Export: If export grid interval 2 and load back, the lithotype definition
process will get error.
259765 Uncertainty Analysis: When a Petrophysical simulation is constrained by
facies, but using the mode (coming from uncertainty analysis), the spinner isn't
grayed out, allowing to the user select more than 1 realization when is the
mode of all of them the one is being used. The statistics are the same for all of
them.
264733 Facies Modeling: EM facies modeling workflow is blocked if one interval
doesn't have any facies data
265245 Data Manager: If delete property, the associated subset should be deleted
together.
272749 Point Set Data: OW Table POINT_DATA_SET_ALL field NUM_POINTS
should be flexible.
276888 Subset Name Character Restriction: Data Analysis, cannot input space for
subset name
283952 Editing Iso-cutoff Maps: Post Processing > Uncertainty Analysis, cannot edit
Iso -cutoff maps option

DecisionSpace Natural Fracture Network Fixed Issues

Defect ID Summary
None listed at this time.

10ep.3.03 Release Notes Page 90 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Dynamic Frameworks to Fill Fixed Issues

Defect ID Summary
None listed at this time.

DecisionSpace Geology Fixed Issues

Defect ID Summary
943858 (PS) Project wells in a given radius distance Well Path Section Edit: It is not
possible to show well projections when using Well Path Section Edit.
951911 (PS) Saved sessions does not update after wells / well lists deletion: Displaying
a well list (that has been deleted by another user) in a saved session causes
the session to crash.
953261 (PS) User Depth table resets for some wells in his session when doing a View
> Reload > All: When you compare the wells that do not get reset to the ones
who do in the Well Z Conversion table in WDM the ones that do not reset have
a preferred TD Curve.
954500 (PS) Be able to add picks to display from Pick Analysis Table via DnD: Users
would like to be able to add picks to display from Pick Analysis Table via Drag
and Drop them to the correlation/LOS view, instead of having to go to select
session data.

Horizontal Well Correlation (Geosteering) Fixed Issues

Defect ID Summary
None listed at this time.

Structural Modeling Fixed Issues

Defect ID Summary
None listed at this time.

Wellbore Analysis Fixed Issues

Defect ID Summary
896434 Seismic Overlay on Framework Surfaces: When restoring a session with
seismic overlay on a Framework Surface, the overlay is only partially drawn if
the associated shared memory volume has been deleted. Clicking the Refresh
button on the Cube view will restore the entire overlay display.
897106 Flattening on Framework Surfaces: Flattening on a Framework surface
does not work properly and has been disabled for this release.

10ep.3.03 Release Notes Page 91 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Zone Manager Fixed Issues

Defect ID Summary
None listed at this time.

DecisionSpace Geophysics Fixed Issues

Defect ID Summary
None listed at this time.

Seismic Attributes Fixed Issues

Defect ID Summary
867498 Color: The color scaling is incorrect in Section and Map views for the Relative
Amplitude Change attribute.
872696 Shared Memory: If the session measurement system is different from the
survey measurement system and you have a non-zero datum, you cannot
create a .bri volume as output, whether the input is shared memory or an
OpenWorks volume. In addition, shared memory output may be incorrectly
shifted vertically.
886245 dir.dat: Get dir.dat is not valid message if a missing or corrupt velocity model
is selected for time-depth conversion.
896724 Structure Attributes: Error when generating Relative Amplitude Change in Y
attribute with a single inline as the AOI.
898546 Volume Math: The two seismic volumes used as input must be from the same
seismic survey, or the second volume must be a subset of the first volume,
with inclusive line and trace numbers.

Velocity Modeling Fixed Issues

Defect ID Summary
188748 Clipping: Issues with clipping velocities have been resolved.
910785 (PS) Merged Project Horizons: The issue with merged project horizons at
elevation has been resolved.
925713, 931392 Importing Seismic Velocity Volumes with Null Traces: Allow users to fully
(PS) import seismic velocity volumes that contain null traces.
935320 (PS) Creating a Dynamic Velocity Model Menu: Issue with MB3 > Create
Dynamic Velocity Model functionality.

10ep.3.03 Release Notes Page 92 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Defect ID Summary
938960, 938962, Coordinate Reference System (CRS) Issues: Problems with moving velocity
948362 (PS) models to different CRSs.
951260 (PS) Interpreter Source Priority: Hybrid velocity models will not recognize your
ISP.
953474 (PS) Multiple Interpretation Projects: Unable to open a velocity model in different
Interpretation Projects (IPs).

DecisionSpace GIS Fixed Issues

Defect ID Summary
None listed at this time.

DecisionSpace Log Calculator Fixed Issues

Defect ID Summary
None listed at this time.

DecisionSpace Microseismic Fixed Issues

Defect ID Summary
891805 wpx Files: Now you can reload the wpx data file without loading microseismic
data if the geophone information gets updated.

DecisionSpace Well Planning Fixed Issues

Defect ID Summary
225034 (869833 Plan Parameters: Save as Default is grayed out in Well planning for Plan
PS) Parameters
225211 (934601 License: DSWellPlan checks out wrong license feature by default
PS)
225244 (941653 Saving Well Plan Names: Save well plans, then close the session and
PS) reopen, the well plan names are changed.
225305 (948637 Session Save: Well Planning ghost in saved session file (problem removing
PS) Well Planning from Inventory in a saved session)
225360 (950402 Display: Creating hazards from faults gives flipped results
PS)
225362 (950426 Target Creation: AssetPlanner cannot create targets when depth limit is used
PS) in 3D Grid

10ep.3.03 Release Notes Page 93 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Defect ID Summary
225386 (950632 Coordinate Display: Coordinates change in OpenWorks well in DS WP
PS)
225406 (950733 Asset Planner Infill with Vertical Wells: AssetPlaner Infill function fails to
PS) detect laterals and plans wells across the lease (vertical well bug)
225461 (951102 Importing Paths: When importing paths using MD, Inc, Azi, path is imported in
PS) Grid North regardless of North reference in project.
226921 (951555 Color Display: Override Color option still in place even after removing it
PS)
228971 (951675 Target Display: Targets toggling on automatically after saving a project in Well
PS) Planning
229259 (951696 Polygon Editing: DecisionSpace CWP - drawing polygons closes when
PS) panning across the map
232533 (951943 Northing and Easting Values: Wrong northing and easting value, offset local
PS) north and local east from center location
248278 (952934 Boundary Selection: Grouping boundaries
PS)
250314 (950732 Infill: Infill functionality fails to pick up some offset well plans. Infill functionality
PS) generates spurious no-go areas on offsets with deviated top-hole sections.
250322 (945367 Relief Wells: Relief Wells are showing up wrongly in Approach Analysis.
PS)
260406 (951530 Domain Conversion: Domain Conversion Does Not Update in Current Cube
PS) View
261190 (953748 Target Display: Locked target position not retained during optimization
PS)
272037 (954478 Display: Well Plan becomes zigzag
PS)
284278 (955601 Target Display: Precision targeting flipped
PS)

10ep.3.03 Release Notes Page 94 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Known Issues
The following list describes behaviors and problems that the Geosciences team has identified as
being an issue to users. This list does not include all the known problems of Geosciences
software.

DecisionSpace Base Known Issues

General Usability and Performance Known Issues

Defect ID Summary
Add Data Dialog Using Filter in Add Data pane does not show all data types: When you type
Box in a filter item, e.g. seismic, some of the seismic data types are not displayed.
In these instances, you must delete the filter and find the data type in the data
tree.
Display Cube View: If you ever run into the issue that Cube View is not responding to
turn on/off objects from Inventory, clone the Cube View and close the non-
responding one.
Online Help New Terminology: The terminology has changed for major parts of the
DecisionSpace Geosciences work area. The graphical views are now called
editors. The task panes are now called views (Window > Show View). The
documentation will continue using the term task panes for the Inventory, Color
Bar, and interpretation panels. Documentation is in the process of confirming
that the correct names are used throughout the documentation. However, this
process is not finished.
Online Help Dynamic Help: The Dynamic Help is connected to all the editors and most of
the task panes. There are a few task panes and links that are not working
properly. Among these are the Single Well Info task pane, Well Layout task
pane, and Fault Tracking task pane.
Online Help Help Buttons: A few of the help buttons are not connected to the help topics.
DecisionSpace DecisionSpace Petrophysics Installation: The version of the DecisionSpace
Petrophysics Petrophysics installer that is bundled with the DecisionSpace package does
Installation not include the .Net install. Users who do not already have .Net version 4.5.2
should install this separately before running the DSG 10ep. installer including
DS Petrophysics OR running the independent DS Petrophysics installer found
in the bundles support folder.
Secondary Secondary Platform Testing: Secondary platforms received only limited
Platform Testing testing for DecisionSpace Geosciences 10ep.3. Testing of these platforms is
continuing post-release. Issues found will be addressed in subsequent
releases.
282577, 274668 Ghost Images Display when Dragging and Dropping in Cube Editor: If
you move an image in the Cube Editor using drag and drop, artifacts of the
previous position of the image display in the background.
Workaround: You can personalize your Windows computer using various
Windows defined Aero Themes. This problem appears when an Aero theme is
selected. Please select a non-Areo theme.

10ep.3.03 Release Notes Page 95 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Defect ID Summary
287214 Configuration Message Window Opens Improperly: Open the Window >
Preferences > DecisionSpace Settings > Memory Configuration pane, do not
make any changes, and click OK. You may receive a message box that says
New values are set and will take effect after the application restarts. This
occurs the first time you enter this panel on Linux computers under certain
circumstances.
295089 Session Synchronization and Restore: Unable to rename an Editor using
the File > Rename menu for the same session displayed in two instances of
the application.
884840 (PS) Invalid Character When Parenthesis in Path: If the application is installed
into a location with a path that results in using parentheses ( ), the application
may not start. If the parentheses occur within the first eight characters, the
launch scripts interpret the parentheses as the part of the logic of the launch
script. If the parenthesis occurs after the eighth character, it is ignored by the
launch scripts.

Workaround: is to not install the application to a location with a path

containing a parenthesis occurring within the first eight characters. This issue
is expected to be resolved in a future release.
A valid example is: C:\Landmark\Program Files (x86)
An invalid example is: C:\DS(86)
291287 Live Filter in Inventory Tree has Performance Problems: If a large number
of data items are in the Inventory tree, the Live Filter could take several
seconds.
292701 Web conferencing in Cubes (Linux): Displaying Directional Surveys in
Cubes crashes the Session.
Workaround: Unchecking the Enable web conferencing option (Cube View
Editor > General Preferences) resolves this and other hotspot problems in
Cubes.
298221 Using Mapped Drives: If you are using a mapped drive on a Windows
system, all users must use the same mapped drive letter in order to see saved
sessions.
299857 Can Not Set Thumb Value in Color Bar: If you lock a thumb you can not set
the value for other thumbs.
299859 Interpretation Types can not be Selected: Sometimes, after you select Well
Planning from the Interpretation Type list box on the Application toolbar, the
remaining interpretation types can not be selected.
299860 Locked Thumb can be Moved: If you lock 2 or more thumbs then unlock
several thumbs, you can manually reset the remaining locked thumbs. You
should not be able to manually reset any locked thumbs.
302772 KDE and Web Browser Settings: Installer application does not honor the
default web browser preferences settings in a KDE session.

10ep.3.03 Release Notes Page 96 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Defect ID Summary
307876 Right-click menu on Dynamic Help video links: If you right click on a video
link in Dynamic Help in Linux, you get an Input Methods item in the menu. This
feature is not implemented.
308124 Error when launching DecisionSpace Geosciences: When you launch the
application and receive the following message An error has occurred. See the
log file Users/UserID/Landmark/DecisionSpace/
WorkspaceNameandDataLaunched/.metadata.log then your workspace has
become corrupted. You must go to Users/UserID/Landmark/DecisionSpace
and delete the Workspace. You will lose some Preference settings when you
delete the workspace. A possible cause for this is editing the files in the
Workspace/.metadata directory. It is important that these files not be edited.
314700 Deleting a Session: It is important that you delete sessions from the Sessions
task pane. If you delete the session from the
c:\Users\UserId\Landmark\DecisionSpace\UserSessions directory instead of
deleting from the Sessions task pane, you will not be able to import the session
again.
314703 Launch from command line: If you enter the command -editor when
launching the application from a command line, the editors open during the last
session will be opened even though you did not specify which editors to open.
316875 (957657 SGF Inventory Display: SGF features despite being checked off from
PS) Inventory continue to display in a Map.
322525 Sessions Between Different Users Cannot be Shared: Error pops up
[SQLITE] while saving a session after using environment variable
LGC_DATA_HOME to remote filer. LGC_DATA_HOME settings are per
individual user and must have a unique path. Sessions between different users
cannot be shared.
323451 Physical Memory Usage (Linux): Physical memory usage is not displayed
correctly on Linux machine. It is always more than 99%, but with the system
monitor, it is 14.3%.
323724 Login Error to iEnergy (Linux Red Hat 7.2): For RedHat 7.2, when the login
URL is clicked on the Welcome Page, the following error is displayed: The
connection to the sso11.corp.halliburton.com has terminated unexpectedly.
Some data may have been transferred.

Workaround: Edit the file ~/.mozilla/eclipse/prefs.js under the users home

directory and add the following line at the end of the file:

user_pref(security.tls.version.max, 3);

Save the file and then restart DecisionSpace Geosciences.

324046 Videos from Dynamic Help (Linux): Videos do not launch properly from the
Dynamic Help on Linux when you click on a video within the help topic.

Workaround: Launch the videos from Dynamic Help > Related Topics in the
Workflow Guide tab or from Help > Contents in the main toolbar.

10ep.3.03 Release Notes Page 97 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Defect ID Summary
326731 Diagnostic Assistant (Windows Only): Processor capacity does not display
the correct value in the Diagnostic Assistant.
326737 Diagnostic Assistant: Project Summary is not displayed correctly; several
data types are missing in the summary in the Diagnostic Assistant.
327061 (958137 Help: Help lists incorrect location for Diagnostic Assistant.
PS)
329974 (958230 Network Settings: Closing and reopening DecisionSpace does not save
PS) network settings.
331808 (958344 Installation: Problem installing DecisionSpace 10ep.2 with 10ep.1.
PS)
332170 (958383 GIS Connection: GIS network connection error in DecisionSpace 10ep.2.
PS)
343237 (958699 Install Guide: Online Help documentation (Installation Guide) for Print Preview
PS) variable DS_PLOT_CGM_DIR describes incorrect location.
300856, 350882, Potential Shared Memory Service Issue (Windows): There is a potential
350928 shared memory service issue on Windows 10, Windows Server 2008, and
Windows Server 2012 in a Virtual Environment.

Workaround:
Start the shared memory service manually (as admin) by typing the command:
%OWHOME%\bin64\ SPDMShmServer.exe -Install
352018 Exception When Creating a New Well: Unhandled event loop exception
upon creating a new well. When you delete wells and then create a new well in
a short amount of time, Well Data Manager (launched from DecisionSpace)
and Single Well Info may throw an exception.
355279 Secondary Windows Platforms with Zeh Montage: For secondary platforms
Win 2012 and Win 10, Zeh montage will not run. We suspect it requires a
recompile of the Qt code. A significant ramification is that you will not be able
to print to a PDF.
355783 Probe Color Map: Color map of probes are not changing from Inventory.
359115, 359379, Launching Well Data Manager Inside DecisionSpace Geosciences:
359415, 359422 DecisionSpace Geosciences freezes when Well Data Manager is opened
from the Inventory tree. Problems include application hanging, session restore
issues, saving newly interpreted horizons, working with Zone Manager, and so
forth.

Workaround: Open Well Data Manager from OpenWorks instead.

Calculator Known Issues

Defect ID Summary
None listed at this time.

10ep.3.03 Release Notes Page 98 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Data Analysis Known Issues

Defect ID Summary
355317 Linux Installation: R folder, a 3rd party statistical package, is missing in the
Linux installers - Need R 3.1.1 Linux install.

Geomechanics Known Issues

Defect ID Summary
None listed at this time.

GIS Known Issues

Defect ID Summary
none Proxy Settings If DecisionSpace Geosciences does not shut down on a Linux
system, recheck your proxy settings.

Workaround: Ensure 127.0.0.1 and 127.0.0.0/8 are listed in the Proxy bypass
settings or in the Ignore Host List.
260409 Shapefiles: Sometimes you cannot add shapefiles from DecisionSpace
Geosciences to the GIS Map.

Workaround: Remove the.gtf file from the Custom Transformations.

266652 Default Transformation: When using the default transformation and adding
data in GIS Map, the selected highlighted data will appear shifted in the map.

Workaround: Go to GIS Preferences and turn on the custom transformation

option.
273760 Decimation GIS Grids: DecisionSpace will automatically apply decimation to
GIS grids to improve rendering performance. You can disable this feature to
see the grids true resolution in the session by adding the environment
variable, ENABLE_GRID_DECIMATION, and setting the value to false. Such
as:
Variable: ENABLE_GRID_DECIMATION
Value: false
281762 DecisionSpace Installation and GIS: On Linux, If the user that installed
DecisionSpace Geosciences did not perform the first GIS workflow, permission
errors may occur when removing DecisionSpace Geosciences. See the
Important Considerations for Installation and Licensing of the DecisionSpace
Geosciences Installation Guide for more information.

10ep.3.03 Release Notes Page 99 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Defect ID Summary
297776 Embedded Database Linux Only: Using the GIS Map Editor while connected
to an Embedded database may yield Wrong JPEG library version errors and
result in a blank GIS Map. This occurs because this process overwrites a
JPEG library to an older version.

Workaround: Request that the system administrator remove the libjpeg.so

and libjpeg.so.62 links from the /usr/lib64 directory and recreate them by
pointing to the libopenjpeg.so.2.1.3.0 version as follows:

cd/usr/lib64
rm libjpeg.so
rm libjpeg.so.62
ln -s libopenjpeg.so.2.1.3.0 libjpeg.so
ln -s libopenjpeg.so.2.1.3.0 libjpeg.so.62
298219 Support ArcGIS Runtime for MPK Files: DecisionSpace Geosciences only
supports Map Package files (.mpk) that have the ArcGIS Runtime setting
enabled. Therefore, when saving your map package through the Save As... >
Map Package feature of ArcMap, ensure this option is checked.
298829 CRS/Datum: After performing a Carto Snap on the GIS Map Editor, any GIS
data that is not in the same CRS/Datum as the GIS Map cannot be added.

Workaround: Access Window > Preferences > Data Sources > GIS and click
Restore Defaults.
302365 Red Hat 7.x: ESRIs ArGIS Runtime 10.2.4 does not support RedHat 7.x Linux
environments; therefore the GIS component of DecisionSpace Geosciences
does not work.
304882 GPK Errors and Blank CRS Popups on Linux: You may encounter GPK
errors while trying to add data to the GIS Map editor or you may see blank
CRS (cartographic reference system) popups when adding data to the Map
and/or Cube editors,.

Workaround: Go to the /tmp folder on your system and remove the

arcgisruntime_8 folder.
305864 MPKs with ArcGIS Server Layers: MXDs that contain ArcGIS server layers
that are converted to MPK format cannot be added to DecisionSpace
Geosciences editors nor the GIS Map editor in DecisionSpace
Geosciences10ep.

Workaround: Remove the ArcGIS Server Layers from the MXD before saving
it as a MPK, and then re-add the ArcGIS Server Layer to the session
separately.

10ep.3.03 Release Notes Page 100 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Defect ID Summary
307362 Polygons from ArcGIS Server: There may be a slight delay during well
selection using polygons from an ArcGIS server when compared to selection
using local GIS polygons.

Workaround: Go to Windows> Preferences > Network Connection >

Proxy bypass > Add Host and add the AGS Server IP, then click OK.
307363 Shapefiles in Vector Mode: Performance degrades for shapefiles that contain
more than 5,000 features when displayed in Vector Mode in Cube View.
315310 Multi User Workstation (Linux): If remote visualization software is used to
share resources for several users on a single workstation, the following
environment variable can be set to accommodate GIS workflows:
GIS_MULTIUSER = true
315614 Shapefiles in Vector Mode: Symbology Settings for Individual Class Break or
Unique Value entries cannot be changed for shapefiles when in Vector mode.

Workaround: To change individual entries, return to the image mode.

316939 MXD to MPK Conversion Script: In the ArcGIS folder of DecisionSpace
103p, there is a python script that will batch convert MXD files to MPK files.
330910 Global Search with Zoomed GISMap Extents: If a Global Search is
performed where the GIS Map Extents are zoomed out so that gray space
appears in the GISMap editor, the search fails.

Workaround: Make the following change in the DSIS installation.

Navigate to the folder [DSIS Installation]\ApplicationServer\data\ds-
search\sp;r\dscore\ds\conf.
At the end of Line Number 39 (that begins with <fileType name=location_rpt
class=solr), add datelineRule=ccwRect/> to the file manage-schema.xml.
340455 Selected Data in the GIS Map is Shifted: When you use ESRI on the Fly
projection, the data selection may not appear in the correct location.

Workaround: If this occurs, go to Windows > Preferences> Data sources >

GIS and click Use default OpenWorks transformation.

Graphics Known Issues

Defect ID Summary
279802 Pop-up Display (Windows Only): Issues with your display driver can cause
pop-ups to be displayed twice. This is an issue between the NIVIDIA graphics
card and DecisionSpace.

Workaround: Disable the nView Desktop Manager by right-clicking on the

Windows desktop and clicking the Disable button in the nView Desktop
Manager.

10ep.3.03 Release Notes Page 101 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Multivariate Analysis Known Issues

Defect ID Summary
none Principal Component Analysis: the user cant use Principal Component
Analysis properties outputs to run Factor Analysis in the MVA workflow. There
isnt an open bug about this for 10ep.1 but this is something the user needs to
be aware of. If they try to use a PCA property while running FA they will get a
pop up message asking the user to select different properties for the
simulation.
294172 Performance: Multivariate Data Analysis performance issue using 3D grids
358053 Unable to Apply a Saved CART Model (Linux): Application is unable to
apply a saved Categorical Regression Tree model on Linux.

Workaround: Click the Create categorical regression tree option then switch
back to Predict using regression tree option. The saved models listed in the
drop down list become names only, not the full path. Reselect the saved model
you want to use and click the New button.

Project Designer Known Issues

Defect ID Summary
None listed at this time.

DecisionSpace Earth Modeling Known Issues

Defect ID Summary
296582 The lithotype data created in older version of DS is not seen displayed in
DS10ep. Exceptions are also seen in the log file.
319409 Multi-user: User A deletes User B's property on point set while being
displayed on User B screen Cube View does not update display and DPE
primary field selection is blank.
319414 Multi-user: Overwriting another users blocked point set while it is selected in
facies modeling results in exception and blank drop down list selection.
319415 Multi-user: Overwriting another users blocked point set while it is selected in
volumetrics results in blank drop down list.
319416 Multi-user: Two users creating the same point set with same name at exact
same time gives exception and poor behavior.
319597 Local Grid Update unable to update when FW surface name has duplicate
name.
329928 Progress bar disappears before finish the volumetrics calculation.
331703 When selecting new PointSet in Lithotype Definition "Data Selection", the 3d-
grid entry has to be re-entered.

10ep.3.03 Release Notes Page 102 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Defect ID Summary
331892 Grid Resampling - Show grid bounding box is turned off after adding new Map
view.
350477 Linux only: Not able to open K Layer Definition window from Local Grid Update
preview probe exception
352634 Resizing 3D Grids: Cannot resize grid bounding box by Shift + click (MB1),
corner manipulator handles are gone.
374276 Raw Lithotype Proportion Display: Raw lithotype proportion curves are not
automatically visualized in the Cube view after well blocking.

Workaround: Manually turn them on in the Inventory tree.

Dynamic Frameworks to Fill Known Issues

Defect ID Summary
295376 DSG may force quit if the user attempts to build a large framework which
exceeds the physical memory of the machine.
295436 In map view, equivalent framework surfaces and OpenWorks surface grids
with overlapping nodes will render with grid lines cell displaced.
322652 Under certain circumstances use of the Kriging algorithm may increase the
time to build a new framework.
323393 Print quality of framework surfaces may be decreased if using a discrete color
map.
339395 Using 2d horizons may cause slowdowns in framework refresh performance.

DecisionSpace Fracture Productivity Known Issues

Defect ID Summary
For information on enhancements, fixed issues and known issues for
DecisionSpace Fracture Productivity Plug-In, please consult the
DecisionSpace Fracture Productivity Plug-In Release Notes.

10ep.3.03 Release Notes Page 103 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

DecisionSpace Geology Known Issues

Defect ID Summary
165335 (900122 Well Query Tool (Renamed Search): Temporary point sets created in TWT
PS) using the Well Query Tool do not display.

Workaround: From the Point Set Display Properties dialog box, under
Advanced, uncheck the box next to Domain match. Your point sets will now
display in the map even if the map is in TWT.
183420 (914249 Point Set Z Fields: TVD fields for point sets created by ZMAP+ software and
PS) the Well Query Tool (DecisionSpace) differ from point sets created elsewhere
in the DecisionSpace software. With DecisionSpace, values in TVD Z fields
are referenced from sea level. With ZMAP+ and the Well Query Tool, values
are referenced from the elevation of the corresponding well. For such point
sets, if you select the TVD field as the Z Position field in the Point Set Display
Properties dialog box, the points will be positioned incorrectly in Cube view. If
available, choose the SSTVD or TVDSS field instead.
183931 (918625 Well Query Tool (Renamed Search): If the total depth of a well is greater
PS) than the last point in the wells position log, the X/Y values for the point set for
that well will be determined from the well headers X Coord BH and Y Coord
BH rather than being extrapolated from the last few points of the position log. If
those values in the well header are incorrect, the point set generated by the
tool will display in an incorrect location for that well.
276992 (954873 Lithology Symbols: Lithology symbols do not auto scale in very thin
PS) interpretation intervals.
297787 Point Sets in Bubble Mapping: The bubble map disappears if the point set is
toggled off in a Cube.
299774 Saved Sessions on Windows 7 and Windows 10: When using a mixture of
Windows 7 and Windows 10 systems and saved sessions in a network
location through the use of LGC_DATA_HOME, surface picks created and
saved to a session do not turn on/off in the Section View using the Inventory
tree.

Workaround: Surface picks selected in the Inventory tree can be turned on in

the View using the Surface Pick Interpretation task pane.
308806 Single Well Info: Single Well Info box collapses before a well can be selected.
The issue is related to the tab being undocked.

Workaround: click the Restore button of the Single Well Info panel. This docks
the panel.
315099 (957499 Grid and Contour Interpretation: Interactive contour-to-grid does not work.
PS)
316333 GeoShell Display: Sluggish geoshells display in Section View so much so that
the application may appear to be hung

10ep.3.03 Release Notes Page 104 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

323293 Strat Columns and Strat Units from StratWorks: User must exit DSG and
start a new session or restore a saved session in order to see changes made
to Strat Column/Strat Unit edited and saved in StratWorks.
326366 Framework Algorithms: Algorithms Kriging Isotropic and Anisotropic from
FW is taking more than 5 times longer to run than the rest.
332366 Well Symbol Display: Well Symbols do not display with Status color in LOD-2.
When Scale Dependencies (LOD-2) is activated, you will notice that well
symbols display with the default path color instead of the status
333154 (958485 Gridding with Polygons: When using a polygon in Grid and Contour, the
PS) gridding close to the edges of the polygon is not smooth.
349428 Inter-Well Point Display: Inter-Well Points display outside the canvas in
CGM.
350041 Performance: Predictive Curve generation
352637 Well Pick Interpretation: Unable to interpret multiple occurrences of the same
well pick in Drag Picks Edit mode after using the Slip Well mode.
353167 Grid and Contour Labels in Print Preview: No contour labels show in Print
Preview if Contour Color Fill is checked in Grid and Contour.
353227 Well Selection: When Show Segments is on, adding wells using the Select
Wells icon may fail or put the selected wells in the wrong location in the
Correlation view.
358345 Launching Well Data Manager inside DecisionSpace Geosciences:
Launching Well Data Manager from withing DecisionSpace Geosciences
causes session files to be created in the WellDataManager folder instead of
DecisionSpace.

Horizontal Well Correlation (Geosteering) Known Issues

Defect ID Summary
none Detaching Windows: Detaching windows from the HWC workspace causes
errors and the system wont run correctly, we strongly recommend not un-
docking views from the HWC workspace.

none Multiple HWC Instances: We do not recommend running two separate

instances of the HWC workspaces on the same well.

Petroleum Systems Known Issues

Defect ID Summary
For information on enhancements, fixed issues and known issues for the
Petroleum Systems Plug-in, consult the Petroleum Systems Plug-in Release
Notes.

10ep.3.03 Release Notes Page 105 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Structural Modeling Known Issues

Defect ID Summary
None listed at this time.

Wellbore Analyzer Known Issues

Defect ID Summary
None listed at this time.

Zone Manager Known Issues

Defect ID Summary
None listed at this time.

DecisionSpace Geophysics Known Issues

Defect ID Summary
none Automated Fault Interpretation Performance: For running AFI fault
likelihood operations, Landmark recommends using a system with large RAM
(Multi-cores) contained workstation with high level GPU to run the operation.
An alternative approach is to use SeisSpace on a cluster to run the attribute
generation and use SeisLink to pass to DSG for further AFI operation.

Based on our limited testing, on a 32 GB RAM machine, with a volume size of

approximately 2 GB .bri volume (32 bit), the operation will take around 8hours
(with GPU) to finish attribute volume generation. This example is a volume of
16x12 miles.
256456 Vertical Fault Display: Edge effects on seismic boundary when displaying
vertical faults.
279735 Automated Fault Interpretation: Fault attribute generation is ignoring z
bounds.
293234, 297330 Fault Data Analysis: Fault operations from inside the Fault Data Analysis GUI
will apply to all faults.

Workaround: Delete, Trim, and Merge faults by using a right-click menu from
Inventory or the view.

10ep.3.03 Release Notes Page 106 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

295886 Fault Snap: No faults generated for top and bottom of slice.
297062 Fault Trim: User cannot trim a fault at a horizon, either at top or base.

Workaround: Trim faults by selecting either TWT or TVD from the menu.
355727 :Prestack Data: Cannot add prestack data to DecisionSpace Geosciences
sessions on RedHat 7.2.

Workaround: If you are using DecisionSpace10ep.3, in order to run on the

Red Hat 7.2 operating system, you must create a soft link for /usr/lib64/
libXm.so.3

Seismic Analysis Known Issues

Defect ID Summary
352863 Red Hat 7.2: Seismic Analysis cannot load or display any Seismic, Wavelet,
and/or Synthetic Data on the Red Hat 7.2 operating system.

Workaround: If you are using DecisionSpace10ep.3, in order to run on the

Red Hat 7.2 operating system, you must create a soft link for /usr/lib64/
libXm.so.3.

Seismic Attribute Generation Known Issues

Defect ID Summary
None listed at this time

Velocity Modeling Known Issues

Defect ID Summary
277857 CRS: DepthTeam Express models build in one CRS cannot be viewed or
edited in a different CRS.
305001 Surface Aliasing: Surface Aliasing is ignored in Velocity Modeling
315628 Depth Team Express Documentation: The Depth Team Express interval/
velocity depth output sample rate documentation is incorrect.
357870 Model Construction: Delta-V values are not accurate for layer-cake velocity
models for layers beyond the first layer.

Property Modeling Known Issues

Defect ID Summary
None at this time.

10ep.3.03 Release Notes Page 107 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Volume Visualization Known Issues

Defect ID Summary
308268 Drag and Drop: Drag and Drop from GeoProbe to DSG Inventory tree does
not work.

Workaround: Items can be successfully dragged to each view type (map,

cube, and section) which will add the object to the Inventory tree.

DecisionSpace Log Calculator Known Issues

Defect ID Summary
None listed at this time.

DecisionSpace Microseismic Known Issues

Defect ID Summary
348482 UnsupportedOperationException selecting an offset well not in the loaded well
list.
Workaround: Make sure offset well(s) are included in the session well list.

DecisionSpace Natural Fracture Network Known Issues

Defect ID Summary
264493 MB3 stereonet properties of the fracture parameters should persist.
327129 DPE Menu title is placed randomly in the Natural Fracture DPE MB3 menu list.
332892 Fracture slice creation error extracting a slice with the fracture in solid color.
Needs to select a property. Object is created though.
350012 Parameters window - Cumulative Length and Clustering & Smoothness
windows appear behind Fracture Parameters window.

DecisionSpace Well Planning Known Issues

Defect ID Summary
852702 PS Well Planning does not appear in the releasable license list.
958739 PS Well Planning Attributes are not saved to the Shapefile attribute table
355683 (959195 In certain workflows, Plan Knowledge Attachments (KAs) are not replicated
PS) during an overwriting Save As when the overwritten Scenario has been
previously opened during the same Session.

10ep.3.03 Release Notes Page 108 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Third-Party Applications
Halliburton uses various third-party applications in the development of its software. Halliburton
acknowledges that certain third party code has been bundled with, or embedded in, its software.
The licensors of this third party code, and the terms and conditions of their respective licenses,
may be found at the following location:

Linux:
$DSHOME/Zeh/Third_Party.pdf

Windows:
%DSHome%\Zeh\Third_Party.pdf

The following table describes the third-party software in the DecisionSpace Geosciences
10ep.3.03 release that is in addition to the ones listed in the Third Party document noted above.

10ep.3.03 Release Notes Page 109 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Substance 6.1 Copyright 2005-2010, Kirill Grouchnikov and contributors All rights
reserved.
Copyright 2001-2005 JGoodies Karsten Lentzsch and contributors All
rights reserved.
Copyright Werner & Walter Randelshofer. All Rights Reserved.
Copyright Tango Project
Copyright Xoetrope Ltd., 2002-2004
Source Code:
Original code available at Copyright 2005-2010, Kirill Grouchnikov and
contributors All rights reserved.
Copyright 2001-2005 JGoodies Karsten Lentzsch and contributors All
rights reserved.
Copyright Werner & Walter Randelshofer. All Rights Reserved.
Copyright Tango Project
Copyright Xoetrope Ltd., 2002-2004
Source Code:
Original code available at:
http://java.net/projects/substance/
Contact Landmark for a file documenting the changes that were made to the
original code and a copy of the modified code.
HDF5 HDF5 (Hierarchical Data Format 5) Software Library and Utilities
Copyright 2006-2010 by The HDF Group.

NCSA HDF5 (Hierarchical Data Format 5) Software Library and Utilities

Copyright 1998-2006 by the Board of Trustees of the University of Illinois.

All rights reserved.

yWorks COPYRIGHT 2006-2007 yWorks ALL RIGHTS RESERVED
Any software and documentation (denoted collective as "software") that is
yGUARD made available from yWorks is the copyrighted work of yWorks and/or its
suppliers.
Use of the software is subject to the general business terms and conditions of
yWorks and its related transaction documents like license sheets or other
written notices.
The software is made available exclusively for use in accordance with the
license terms. Any reproduction or redistribution of the software not in
accordance with the license terms is expressly prohibited by law, and may
result in severe civil and criminally penalties. Violators will be prosecuted to
the maximum extent possible.
Please note:
YOU ARE BREAKING A LAW WHEN USING OUR SOFTWARE BEYOND
OUR LICENSE TERMS. COPYING OR REPRODUCTION OF OUR
SOFTWARE TO ANY OTHER SERVER OR LOCATION FOR FURTHER
REPRODUCTION OR REDISTRIBUTION IS EXPRESSLY PROHIBITED.

10ep.3.03 Release Notes Page 110 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Sun Microsystems: Copyright 1994-2007 Sun Microsystems, Inc. All Rights Reserved.

Java Advanced Imaging Neither the name of Sun Microsystems, Inc. or the names of contributors may
1.1.2 be used to endorse or promote products derived from this software without
specific prior written permission.
JavaBeans Activation This software is provided "AS IS, without a warranty of any kind. ALL
Framework 1.0 EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
Java Matrix (JAMA) MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-
Package INFRINGEMENT, ARE HEREBY EXCLUDED. SUN MICROSYSTEMS, INC.
("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE FOR ANY
Java Media Framework DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING,
2.1.1 MODIFYING OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.
IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST
AWT Java Native REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL,
Interface (JNI) CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING
TableLayout OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, EVEN IF
SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Java Runtime You acknowledge that this software is not designed, licensed or intended for
Environment 1.6 Update use in the design, construction, operation or maintenance of any nuclear
1 facility.
Redistribution and use in source and binary forms, with or without
Java Media Framework modification, are permitted provided that the following conditions are met:
2.1.1e Redistribution of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
JComponentVista Redistribution in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or
Java 2 Platform SE other materials provided with the distribution.
Neither the name of Sun Microsystems, Inc. or the names of contributors may
RPC be used to endorse or promote products derived from this software without
specific prior written permission.
This software is provided "AS IS," without a warranty of any kind. ALL
EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-
INFRINGEMENT, ARE HEREBY EXCLUDED. SUN MICROSYSTEMS, INC.
("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE FOR ANY
DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING,
MODIFYING OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.
IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST
REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL,
CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING
OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, EVEN IF
SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

You acknowledge that this software is not designed, licensed or intended for
use in the design, construction, operation or maintenance of any nuclear
facility.

10ep.3.03 Release Notes Page 111 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Apache Software Copyright 2007 The Apache Software Foundation

Foundation
Redistributions of source code must retain the above copyright notice, this list
Jakarta-POI of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
The end-user documentation included with the redistribution, if any, must
include the following acknowledgment: "This product includes software
developed by the Apache Software Foundation (http://www.apache.org/)."
Alternately, this acknowledgment may appear in the software itself, if and
wherever such third-party acknowledgments normally appear.
The names "Apache" and "Apache Software Foundation", "Jakarta-POI"
must not be used to endorse or promote products derived from this software
without prior written permission. For written permission, please contact
[email protected].
Products derived from this software may not be called "Apache" or "Jakarta-
POI", nor may "Apache" or "Jakarta-POI" appear in their name, without prior
written permission of the Apache Software Foundation.

THIS SOFTWARE IS PROVIDED AS IS'' AND ANY EXPRESSED OR

IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.

10ep.3.03 Release Notes Page 112 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Jgraph Copyright 2006 - JGraph

This license statement and limited warranty constitutes a legal agreement
("License Agreement") between you (either as an individual or a single entity)
and JGraph Ltd. for the software product ("Software") identified above,
including any software, media, and accompanying on-line or printed
documentation.
BY INSTALLING, COPYING, OR OTHERWISE USING THE SOFTWARE,
YOU AGREE TO BE BOUND BY ALL OF THE TERMS AND CONDITIONS
OF THE LICENSE AGREEMENT.
Upon your acceptance of the terms and conditions of the License Agreement,
JGraph Ltd. grants you the right to use the Software in the manner provided
below:
This Software is owned by JGraph Ltd. and is protected by copyright law and
international copyright treaty. Therefore, you must treat this Software like any
other copyrighted material (e.g., a book), except that you may either make
one copy of the Software solely for backup or archival purposes or transfer
the Software to a single hard disk provided you keep the original solely for
backup or archival purposes.
You may transfer the Software and documentation on a permanent basis
provided you retain no copies and the recipient agrees to the terms of the
License Agreement. Except as provided in the License Agreement, you may
not transfer, rent, lease, lend, copy, modify, translate, sublicense, time-share
or electronically transmit or receive the Software, media or documentation.
If you are not in receipt of the source code of the Software, you acknowledge
that the Software is a confidential trade secret of JGraph Ltd. and therefore
you agree not to reverse engineer, decompile, or disassemble the Software.
JGraph Ltd. grants to you as an individual, a personal, nonexclusive license
to install and use the Software for the sole purposes of designing, developing,
testing, and deploying application programs which you create. You may
install copies of the Software on computers in a manner consistent with the
type of license purchased. A Single Developer License may be installed on a
computer and be freely moved from one computer to another, providing that
you have purchased a number of Single Developer Licenses equivalent to the
maximum possible number of developers using that Software concurrently. A
Site Developer License may be installed on any number of computers and be
used by any number of developers at any time at one geographical location.
A geographical location is defined as a building or site occupied by the
employees of one company or organization.
If you are an entity, JGraph Ltd. grants you the right to designate one
individual within your organization ("Named User") to have the right to use the
Software in the manner provided above, in the case of the Single Developer
License.
You may not distribute any program or file which includes, is created from, or
otherwise incorporates portions of the Software if such program or file is a
general purpose development tool, library, and/or component, or is otherwise
generally competitive with or a substitute for any JGraph Ltd. product.
Continued next page...

10ep.3.03 Release Notes Page 113 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Jgraph Continued from previous page...

SOURCE CODE
In addition to the license and rights granted, JGraph Ltd. grants you the right
to use and modify the SOFTWARE source provided you purchased source
code.
You may not distribute the SOFTWARE source code, or any modified version
or derivative work of the SOFTWARE source code, in source code form.
The source code contained herein and in related files is provided to the
registered developer for the purposes of education and troubleshooting.
Under no circumstances may any portion of the source code be distributed,
disclosed or otherwise made available to any third party without the express
written consent of JGraph Ltd.
Under no circumstances may the source code be used in whole or in part, as
the basis for creating a product that provides the same, or substantially the
same, functionality as any JGraph Ltd. product.
The registered developer acknowledges that this source code contains
valuable and proprietary trade secrets of JGraph Ltd. The registered
developer agrees to expend every effort to insure its confidentiality.
SOURCE CODE IS SOLD AS IS. JGRAPH LTD. DOES NOT PROVIDE ANY
TECHNICAL SUPPORT FOR SOURCE CODE.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, JGRAPH

LTD. AND ITS SUPPLIERS DISCLAIM ALL OTHER WARRANTIES AND
CONDITIONS, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT, WITH
REGARD TO THE SOFTWARE, AND THE PROVISION OF OR FAILURE TO
PROVIDE SUPPORT SERVICES. THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHERS, WHICH VARY
FROM STATE/JURISDICTION TO STATE/JURISDICTION.

Macrovision 2002-2007 Macrovision Corporation

InstallAnywhere 8.0.2 You may not (a) make the Software available for use by others in any service
bureau or similar arrangement; (b) distribute, sublicense, transfer, or lend the
FlexLM Software to any third party; or (d) disassemble or reverse engineer (except in
European Union countries, to the extent allowed by law) the Software. You
may copy the Software solely for backup/archival purposes, provided that you
include all copyright and similar rights notices. Licensor (or its licensor) retains
all right, title, and interest in the Software (and in all copies). Unauthorized
copying and modification of the Software is not permitted.

Continued next page...

10ep.3.03 Release Notes Page 114 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Macrovision Continued from previous page...

InstallAnywhere 8.0.2 If you have a license to the InstallAnywhere Collaboration or InstallAnywhere

Enterprise, you may use the Software for the purposes of creating unit test
FlexLM installations for your own exclusive use. You may use the software as a plug-
in to the Eclipse Open Source IDE. Licensor is not licensing to you any right,
title, and interest with respect to the Eclipse Open Source IDE; your use of the
Eclipse Open Source IDE is subject to your acceptance of the terms and
conditions of the end-user license agreement from Eclipse Foundation for that
product.
The Software component parts may not be separated for use on more than
one computer, except as set forth in this Agreement. You may copy the files
specifically identified in the documentation as "redistributables" and
redistribute such files to your end users of your products, provided that: (a) all
such distribution is done solely with the redistributables as an integral part of
your software installations; (b) all copies of the redistributables must be exact
and unmodified; and (c) you grant your end users a limited, personal, non-
exclusive and non-transferable license to use the redistributables only to the
extent required for the permitted operation of your products and not to
distribute them further. You will reproduce with the redistributables all
applicable trademark and copyright notices that accompany the Software, but
you may not use Licensor's name, logos or trademarks to market your
products.
Licensor warrants that:
a.it has the right and authority to grant the rights described in this Agreement,
and;
b.the Software, as provided, will substantially perform the functions described
in the documentation when operated in the intended environment for a period
of ninety (90) days from the date of delivery (the "Warranty Period").
THE WARRANTIES ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. LICENSOR EXPRESSLY
DISCLAIMS ANY WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Licensor does not warrant that the Software will (a) achieve specific results,
(b) operate without interruption, or (c) be error free.

This Agreement does not convey to you any rights of ownership in the
Software. All right, title, and interest in the Software and in any ideas, know-
how, and programs which are developed by Licensor in the course of
providing any technical services, including any enhancements or
modifications made to the Software, shall at all times remain the property of
Licensor or its licensor. You acknowledge and agree that the Software is
licensed, not sold. You shall not permit the Software to be accessed or used
by anyone other than your employees whose duties require such access or
use.
You will not remove, modify or alter any of Licensor's copyright, trademark or
proprietary rights notices from any part of the Software, including but not
limited to any such notices contained in the physical and/or electronic media
or documentation, in the Setup Wizard dialogue or 'about' boxes, in any of the
runtime resources and/or in any web-presence or web-enabled notices, code
or other embodiments originally contained in or otherwise created by the
Software, or in any archival or back-up copies, if applicable.

10ep.3.03 Release Notes Page 115 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

iText Copyright 1999-2005 by Bruno Lowagie and Paulo Soares. All Rights
Reserved.

To use iText, you agree with either the Mozilla Public License (with LGPL as
alternative license) or the Library General Public License (without MPL).
Source Code License.
The Initial Developer Grant.
The Initial Developer hereby grants You a world-wide, royalty-free, non-
exclusive license, subject to third party intellectual property claims:
(a) under intellectual property rights (other than patent or trademark)
Licensable by Initial Developer to use, reproduce, modify, display, perform,
sublicense and distribute the Original Code (or portions thereof) with or
without Modifications, and/or as part of a Larger Work; and
(b) under Patents Claims infringed by the making, using or selling of Original
Code, to make, have made, use, practice, sell, and offer for sale, and/or
otherwise dispose of the Original Code (or portions thereof).
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date
Initial Developer first distributes Original Code under the terms of this License.
(d) notwithstanding Section 2.1(b) above, no patent license is granted: 1) for
code that You delete from the Original Code; 2) separate from the Original
Code; or 3) for infringements caused by: i) the modification of the Original
Code or ii) the combination of the Original Code with other software or
devices.

Contributor Grant.
Subject to third party intellectual property claims, each Contributor hereby
grants You a world-wide, royalty-free, non-exclusive license:
(a) under intellectual property rights (other than patent or trademark)
Licensable by Contributor, to use, reproduce, modify, display, perform,
sublicense and distribute the Modifications created by such Contributor (or
portions thereof) either on an unmodified basis, with other Modifications, as
Covered Code and/or as part of a Larger Work; and
(b) under Patent Claims infringed by the making, using, or selling of
Modifications made by that Contributor either alone and/or in combination with
its Contributor Version (or portions of such combination), to make, use, sell,
offer for sale, have made, and/or otherwise dispose of: 1) Modifications made
by that Contributor (or portions thereof); and 2) the combination of
Modifications made by that Contributor with its Contributor Version (or portions
of such combination).
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date
Contributor first makes Commercial Use of the Covered Code.
(d) notwithstanding Section 2.2(b) above, no patent license is granted: 1) for
any code that Contributor has deleted from the Contributor Version; 2)
separate from the Contributor Version; 3) for infringements caused by: i) third
party modifications of Contributor Version or ii) the combination of
Modifications made by that Contributor with other software (except as part of
the Contributor Version) or other devices; or 4) under Patent Claims infringed
by Covered Code in the absence of Modifications made by that Contributor.

Continued next page...

10ep.3.03 Release Notes Page 116 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

iText Continued from previous page...

Intellectual Property Matters

(a) Third Party Claims.
If Contributor has knowledge that a license under a third party's intellectual
property rights is required to exercise the rights granted by such Contributor
under Sections 2.1 or 2.2, Contributor must include a text file with the Source
Code distribution titled "LEGAL" which describes the claim and the party
making the claim in sufficient detail that a recipient will know whom to contact.
If Contributor obtains such knowledge after the Modification is made available
as described in Section 3.2, Contributor shall promptly modify the LEGAL file
in all copies Contributor makes available thereafter and shall take other steps
(such as notifying appropriate mailing lists or newsgroups) reasonably
calculated to inform those who received the Covered Code that new
knowledge has been obtained.
(b) Contributor APIs.
If Contributor's Modifications include an application programming interface
and Contributor has knowledge of patent licenses which are reasonably
necessary to implement that API, Contributor must also include this
information in the LEGAL file.
(c) Representations.
Contributor represents that, except as disclosed pursuant to Section 3.4(a)
above, Contributor believes that Contributor's Modifications are Contributor's
original creation(s) and/or Contributor has sufficient rights to grant the rights
conveyed by this License.

COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS"

BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE
COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A
PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH
YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY
RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER
CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING,
REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY
CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY
COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS
DISCLAIMER.

10ep.3.03 Release Notes Page 117 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

CougaarForge Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
Cougaar Dual Slider 1. Redistributions of source code must retain the original author's copyright
Swing Component notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the original author's copyright
notice, this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Java Exchange Copyright 2007 The Apache Software Foundation

RandomGUID
Java Exchange Continued from previous page...

RandomGUID APPENDIX: How to apply the Apache License to your work.

To apply the Apache License to your work, attach the following boilerplate
notice, with the fields enclosed by brackets "[]" replaced with your own
identifying information. (Don't include the brackets!) The text should be
enclosed in the appropriate comment syntax for the file format. We also
recommend that a file or class name and description of purpose be included
on the same "printed page" as the copyright notice for easier identification
within third-party archives.

Copyright [yyyy] [name of copyright owner]

Licensed under the Apache License, Version 2.0 (the "License"); you may not
use this file except in compliance with the License. You may obtain a copy of
the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed

under the License is distributed on an "AS IS" BASIS, WITHOUT
WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

10ep.3.03 Release Notes Page 118 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Jython 2.5.1 Copyright (c) 2000-2009 Jython Developers.

All rights reserved.

Copyright (c) 2000 BeOpen.com.

All Rights Reserved.

Copyright (c) 2000 The Apache Software Foundation.

All rights reserved.

Copyright (c) 1995-2000 Corporation for National Research Initiatives.

All Rights Reserved.

Copyright (c) 1991-1995 Stichting Mathematisch Centrum, Amsterdam.

All Rights Reserved.

Copyright (c) 2007 Python Software Foundation;

All Rights Reserved
Open Source Copyright 2007 - OSTG Open Source Technology Group, All Rights
Technology Group: Reserved
Redistribution and use in source and binary forms, with or without
Foxtrot modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list
ATLAS (Automatically of conditions and the following disclaimer.
Tuned Linear Algebra Redistributions in binary form must reproduce the above copyright notice, this
Software) list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
Neither the name of the software nor the names of the contributors may be
used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Java Boutique These components are free for any use you see fit (other than selling the
components as a standalone product.)
Tabsplitter

10ep.3.03 Release Notes Page 119 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Blue Marble Copyright 2007 Blue Marble Geographics

Geographics The agreement specifies the following:
Halliburton agrees to include an acknowledgment in the about box of the
Blue Marble 5.0.0 Landmark Software containing the Ported Derivatives that GeoCalc is the
trademark of Blue Marble and that the Software and the Ported Derivatives
are the copyrighted property of Blue Marble.
Landmark shall not permit any personnel of Landmark to remove proprietary
or other legend or restrictive notice contained or included in any material
provided by Blue Marble, and that Landmark shall not permit Landmark
personnel to reproduce or copy any such material except as specifically
authorized hereunder.
Landmark shall use reasonable efforts to include an acknowledgement of Blue
Marbles copyright and the mark GeoCalc in advertising materials relating to
the Landmark Software containing Ported Derivatives.
Mingw.org Copyright 2004 www.mingw.org
All rights reserved
Basic MinGW runtime When MinGW runtime was released, the source was placed into the public
mingwm10.dll domain. No one owns a copyright (C) to the source because of this. You as a
software manufacturer are free to use the MinGW runtime in your proprietary
and OpenSource software as you see fit. The only thing you can't do is to
claim ownership of the source and use the creator's name, the MinGW name
or the name of any of it's contributors in endorsement of any product.
The MinGW basic runtime system, which is basically the glue to the
underlying operating system, is completely in the public domain. The runtime
system includes MinGW headers (such as stdio.h), libraries (such as
libmingw32.a) and import libraries for CRTDLL/MSVCRT.
W32API, which consists of the headers and import libraries related to WIN32
API access, is released under copyright. The copyright agreement states no
restrictions are placed on programs or object files compiled with the library.
Mingw development tools, which include compilers, linkers, other tools in the
bin directory, etc., are released under the GNU General Public License.
Profiled code, which is code compiled and linked with the -pg option for
runtime profiling, also falls under the GNU General Public License. CAUTION:
do not distribute proprietary source with profiling enabled. The profiling library
is covered by the GPL which infects your product to conform to the GPL as
well.

10ep.3.03 Release Notes Page 120 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Silicon Graphics Copyright 1993-2007 Silicon Graphics, Inc.

Subject to the terms of this License and any third party intellectual property
OpenGL Utility and claims, for the duration of intellectual property protections inherent in the
Extensions Header Files Original Code, SGI hereby grants Recipient a worldwide, royalty-free, non-
exclusive license, to do the following: (i) under copyrights Licensable by SGI,
OpenGL Windows to reproduce, distribute, create derivative works from, and, to the extent
Interface applicable, display and perform the Original Code and/or any Modifications
provided by SGI alone and/or as part of a Larger Work; and (ii) under any
OpenGL X Interface Licensable Patents, to make, have made, use, sell, offer for sale, import and/
Header Files or otherwise transfer the Original Code and/or any Modifications provided by
SGI. Recipient accepts the terms and conditions of this License by
undertaking any of the aforementioned actions. The patent license shall apply
to the Covered Code if, at the time any related Modification is added, such
addition of the Modification causes such combination to be covered by the
Licensed Patents. The patent license in Section 2.1(ii) shall not apply to any
other combinations that include the Modification. No patent license is provided
under SGI Patents for infringements of SGI Patents by Modifications not
provided by SGI or combinations of Original Code and Modifications not
provided by SGI.

Subject to the terms of this License and any third party intellectual property
claims, Recipient hereby grants SGI and any other Recipients a worldwide,
royalty-free, non-exclusive license, under any Recipient Patents, to make,
have made, use, sell, offer for sale, import and/or otherwise transfer the
Original Code and/or any Modifications provided by SGI.

Continued next page...

10ep.3.03 Release Notes Page 121 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Silicon Graphics Continued from previous page...

OpenGL Utility and The Notice set forth in Exhibit A, below, must be conspicuously retained or
Extensions Header Files included in any and all redistributions of Covered Code. For distributions of
the Covered Code in source code form, the Notice must appear in every file
OpenGL Windows that can include a text comments field; in executable form, the Notice and a
Interface copy of this License must appear in related documentation or collateral where
the Recipients rights relating to Covered Code are described. Any Additional
OpenGL X Interface Notice Provisions which actually appears in the Original Code must also be
Header Files retained or included in any and all redistributions of Covered Code.
Note that, as provided in the License, the Software is distributed on an "AS IS"
basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS
DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED
WARRANTIES AND CONDITIONS OF MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT.
COVERED CODE IS PROVIDED "AS IS." ALL EXPRESS AND IMPLIED
WARRANTIES AND CONDITIONS ARE DISCLAIMED, INCLUDING,
WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS
OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT. SGI ASSUMES NO
RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE.
SHOULD THE SOFTWARE PROVE DEFECTIVE IN ANY RESPECT, SGI
ASSUMES NO COST OR LIABILITY FOR SERVICING, REPAIR OR
CORRECTION. THIS DISCLAIMER OF WARRANTY IS AN ESSENTIAL
PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS
AUTHORIZED HEREUNDER EXCEPT SUBJECT TO THIS DISCLAIMER.
Koders Copyright 2007 Koders. All rights reserved.

KaiserWindow.java The Koders Services are made available for your personal, non-commercial
use only. You may not use the Koders Services to sell a product or service. If
you want to make commercial use of the Koders Services, you must enter into
an agreement with Koders to do so in advance.
Koders disclaims any and all responsibility or liability for the accuracy, content,
completeness, legality, reliability, or operability or availability of information or
material displayed in the Koders SERVICES results. Koders disclaims any
responsibility for the deletion, failure to store, misdelivery, or untimely delivery
of any information or material. Koders disclaims any responsibility for any
harm resulting from downloading or accessing any information or material on
the Internet through the Koders SERVICES.

Continued next page...

10ep.3.03 Release Notes Page 122 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Koders Continued from previous page...

KaiserWindow.java THE Koders SERVICES, AND ALL MATERIALS, INFORMATION,

PRODUCTS AND SERVICES INCLUDED IN THE Koders SERVICES ARE
PROVIDED "AS IS," WITH NO WARRANTIES WHATSOEVER. Koders AND
ITS LICENSORS EXPRESSLY DISCLAIM TO THE FULLEST EXTENT
PERMITTED BY LAW ALL EXPRESS, IMPLIED, AND STATUTORY
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF PROPRIETARY RIGHTS. Koders AND ITS
LICENSORS DISCLAIM ANY WARRANTIES REGARDING THE SECURITY,
RELIABILITY, TIMELINESS, AND PERFORMANCE OF THE Koders
SERVICES. Koders AND ITS LICENSORS DISCLAIM, ANY WARRANTIES
FOR ANY INFORMATION OR ADVICE OBTAINED THROUGH THE Koders
SERVICES. Koders AND ITS LICENSORS DISCLAIM ANY WARRANTIES
FOR SERVICES OR GOODS RECEIVED THROUGH OR ADVERTISED ON
THE Koders SERVICES OR RECEIVED THROUGH ANY LINKS PROVIDED
BY THE Koders SERVICES, AS WELL AS FOR ANY INFORMATION OR
ADVICE RECEIVED THROUGH ANY LINKS PROVIDED IN THE Koders
SERVICES.
YOU UNDERSTAND AND AGREE THAT YOU DOWNLOAD OR
OTHERWISE OBTAIN MATERIAL OR DATA THROUGH THE USE OF THE
Koders SERVICES AT YOUR OWN DISCRETION AND RISK AND THAT
YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGES TO YOUR
COMPUTER SYSTEM OR LOSS OF DATA THAT RESULTS FROM THE
DOWNLOAD OF SUCH MATERIAL OR DATA.
SOME STATES OR OTHER JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSIONS
MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER RIGHTS THAT
VARY FROM STATE TO STATE AND JURISDICTION TO JURISDICTION.

10ep.3.03 Release Notes Page 123 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Colorado School of Copyright (c) 2006

Mines and others
All rights reserved. This program and accompanying materials are made
agfc.h (advance available under the terms of the Common Public License - v1.0, which
geophysical fundamental accompanies this distribution.
C) Common Public License - v 1.0
THE ACCOMPANYING PROGRAM IS PROVIDED UNDER THE TERMS OF
CubicInterpolator.java THIS COMMON PUBLIC LICENSE ("AGREEMENT"). ANY USE,
REPRODUCTION OR DISTRIBUTION OF THE PROGRAM CONSTITUTES
RandomFloat.java RECIPIENT'S ACCEPTANCE OF THIS AGREEMENT.
GRANT OF RIGHTS
Subject to the terms of this Agreement, each Contributor hereby grants
Recipient a non-exclusive, worldwide, royalty-free copyright license to
reproduce, prepare derivative works of, publicly display, publicly perform,
distribute and sublicense the Contribution of such Contributor, if any, and
such derivative works, in source code and object code form.
Subject to the terms of this Agreement, each Contributor hereby grants
Recipient a non-exclusive, worldwide, royalty-free patent license under
Licensed Patents to make, use, sell, offer to sell, import and otherwise
transfer the Contribution of such Contributor, if any, in source code and object
code form. This patent license shall apply to the combination of the
Contribution and the Program if, at the time the Contribution is added by the
Contributor, such addition of the Contribution causes such combination to be
covered by the Licensed Patents. The patent license shall not apply to any
other combinations which include the Contribution. No hardware per se is
licensed hereunder.
Recipient understands that although each Contributor grants the licenses to
its Contributions set forth herein, no assurances are provided by any
Contributor that the Program does not infringe the patent or other intellectual
property rights of any other entity. Each Contributor disclaims any liability to
Recipient for claims brought by any other entity based on infringement of
intellectual property rights or otherwise. As a condition to exercising the rights
and licenses granted hereunder, each Recipient hereby assumes sole
responsibility to secure any other intellectual property rights needed, if any.
For example, if a third party patent license is required to allow Recipient to
distribute the Program, it is Recipient's responsibility to acquire that license
before distributing the Program.
Each Contributor represents that to its knowledge it has sufficient copyright
rights in its Contribution, if any, to grant the copyright license set forth in this
Agreement.
Continued next page...

10ep.3.03 Release Notes Page 124 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Colorado School of Continued from previous page...

Mines and others
COMMERCIAL DISTRIBUTION
agfc.h (advance Commercial distributors of software may accept certain responsibilities with
geophysical fundamental respect to end users, business partners and the like. While this license is
C) intended to facilitate the commercial use of the Program, the Contributor who
includes the Program in a commercial product offering should do so in a
CubicInterpolator.java manner which does not create potential liability for other Contributors.
Therefore, if a Contributor includes the Program in a commercial product
RandomFloat.java offering, such Contributor ("Commercial Contributor") hereby agrees to defend
and indemnify every other Contributor ("Indemnified Contributor") against any
losses, damages and costs (collectively "Losses") arising from claims,
lawsuits and other legal actions brought by a third party against the
Indemnified Contributor to the extent caused by the acts or omissions of such
Commercial Contributor in connection with its distribution of the Program in a
commercial product offering. The obligations in this section do not apply to
any claims or Losses relating to any actual or alleged intellectual property
infringement. In order to qualify, an Indemnified Contributor must: a) promptly
notify the Commercial Contributor in writing of such claim, and b) allow the
Commercial Contributor to control, and cooperate with the Commercial
Contributor in, the defense and any related settlement negotiations.
WARRANTY EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT,
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT
WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR
IMPLIED INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR
CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is solely
responsible for determining the appropriateness of using and distributing the
Program and assumes all risks associated with its exercise of rights under this
Agreement, including but not limited to the risks and costs of program errors,
compliance with applicable laws, damage to or loss of data, programs or
equipment, and unavailability or interruption of operations.

DISCLAIMER OF LIABILITY
EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, NEITHER
RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST
PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY
RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.Indemnified Contributor may participate
in any such claim at its own expense.

10ep.3.03 Release Notes Page 125 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Microsoft Platform SDK 2007 Microsoft Corporation

Microsoft Visual Studio Any software that is made available to download from the Services
2005 ("Software") is the copyrighted work of Microsoft and/or its suppliers. Use of
the Software is governed by the terms of the end user license agreement, if
any, which accompanies or is included with the Software ("License
Agreement"). An end user will be unable to install any Software that is
accompanied by or includes a License Agreement, unless he or she first
agrees to the License Agreement terms.
WITHOUT LIMITING THE FOREGOING, COPYING OR REPRODUCTION
OF THE SOFTWARE TO ANY OTHER SERVER OR LOCATION FOR
FURTHER REPRODUCTION OR REDISTRIBUTION IS EXPRESSLY
PROHIBITED, UNLESS SUCH REPRODUCTION OR REDISTRIBUTION IS
EXPRESSLY PERMITTED BY THE LICENSE AGREEMENT
ACCOMPANYING SUCH SOFTWARE.
THE SOFTWARE IS WARRANTED, IF AT ALL, ONLY ACCORDING TO THE
TERMS OF THE LICENSE AGREEMENT. EXCEPT AS WARRANTED IN
THE LICENSE AGREEMENT, MICROSOFT CORPORATION HEREBY
DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH REGARD TO
THE SOFTWARE, INCLUDING ALL WARRANTIES AND CONDITIONS OF
MERCHANTABILITY, WHETHER EXPRESS, IMPLIED OR STATUTORY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-
INFRINGEMENT.

10ep.3.03 Release Notes Page 126 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Geovariances (The following except is from Landmark Graphics Corporation Embedded

Technology Agreement - Agreement Number 2007-CONT-000638)

Isatis 2. LICENSE GRANT TO LANDMARK.

2.1. License. During the Term of this Agreement (as defined below),
Geovariances hereby grants Landmark a worldwide license to use the
Geovariances' Library in executable form on an Exclusive Basis within the
exploration and production segment of the worldwide oil and gas industry for
the purposes of development, demonstration, marketing, and sublicensing to
Landmark's sublicensees, together with the Licensed Documentation, and any
and all modifications, enhancements, or replacements to the Geovariances'
Library and License Documentation that may be communicated by
Geovariances to Landmark from time to time.

2.2. Trademark and Service Mark License. Subject to the terms of this
Agreement, Geovariances grants Landmark the right to use Geovariances
Marks in connection with Landmark's efforts to market and sublicense the
Geovariances' Library (or other licensed uses of the Geovariances' Library).
Landmark shall reference the Geovariances Marks as deemed reasonably
appropriate by Landmark and in keeping with Landmark's overall marketing
strategies, while preserving the integrity and commercial value of such Marks.
Landmark shall use all reasonable endeavors to coordinate with
Geovariances regarding the references of Geovariances' Marks. All rights to
use Geovariances Marks shall cease upon expiration or termination of this
Agreement

2.3. Title to and Use of Geovariances' Library and Standard User

Documentation. All right, title, and interest in and to the Geovariances' Library
and Standard User Documentation shall remain with Geovariances.
Landmark. acknowledges that no such right, title, or interest in or to the
Geovariances' Library is granted under this Agreement, and no such assertion
shall be made by Landmark. Except as otherwise expressly stated within this
Agreement, neither Landmark nor its sublicensees shall modify, translate,
reverse engineer, decompile disassemble, create derivative works of the
Geovariances' Library, copy the Geovariances' Library (except for back up
purposes), rent, lease, assign, license to others (except as provided herein) or
otherwise transfer rights to the Geovariances' Library, or remove any
proprietary notices or labels on the Geovariances' Library or Standard User
Documentation.

10ep.3.03 Release Notes Page 127 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Contacting Landmark Customer Support

Landmark Customer Support operates Technical Assistance Centers (TACs) in Malaysia, the
United Kingdom, and the United States. Customer Support provides technical assistance on
Landmark applications. The website for Landmark is:

Halliburton | Landmark (https://www.landmark.solutions/)

Requests for support can be made by:

Landmark Customer Support Portal

See Submitting a Request for Technical Assistance below.

Email

[email protected] Pacific

[email protected] America (Spanish)

[email protected] America (Portuguese)

[email protected], Eurasia, Europe, Middle East, North America

Telephone

See Technical Assistance Centers below.

Submitting a Request for Technical Assistance

To submit a request for technical assistance:

1. Open Landmark Customer Support Portal (https://www.landmark.solutions/Support)

in a browser.

2. Click Log On To Customer Support under the Need Help? heading. The Sign In page
displays.

However, if you have previously signed in and the system has remembered your credentials,
the Customer Support page displays.

3. If the Sign In page is displaying, log in. The Customer Support page displays.

4. Under the Need Help? heading, click Customer Support Portal. The Landmark Customer
Support page appears in the browser.

5. In the Case & Defect Information area on the right, select Create A New Case. The Add
Case page appears in the browser.

10ep.3.03 Release Notes Page 128 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

6. Fill in the requested information.

Provide:

Details about your technical concern, including any error messages.

Workflow steps where the problem occurred.

Attachments of screen shots that capture the problem.

7. Click Submit.

A support analyst in the nearest Technical Assistance Center will respond to your request.

Technical Assistance Centers

The hours of operation are:

8:00 a.m. - 5:00 p.m., local time

Monday-Friday, excluding holidays

The phone numbers for the Technical Assistance Centers are:

Asia Pacific, Malaysia

+61-8-9481-4488

Toll Free +1-800-803-687 (Malaysia)

Europe, Africa, Middle East, Eurasia, United Kingdom

+44-1372-868686

Latin America, USA

+1-713-839-3405 (Spanish, Portuguese, English)

North America, USA

+1-713-839-2200 (Houston, TX, USA)

Toll Free +1-877-435-7542

For more information about contacting Customer Support, see:

https://www.landmark.solutions/Support

10ep.3.03 Release Notes Page 129 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

2017 Halliburton
All Rights Reserved

This publication has been provided pursuant to an agreement containing restrictions on its use. The publication is also protected by
Federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system,
or translated into any human or computer language, in any form or by any means, electronic, magnetic, manual, or otherwise, or
disclosed to third parties without the express written permission of:

Halliburton | Landmark
3000 North Sam Houston Parkway East, Houston, Texas 77032-3219, USA
P.O. Box 60087, Houston, Texas 77205-0087, USA
Phone: 281.871.4000
Internet: https://www.landmark.solutions/

Trademarks
3D Drill View, 3D Drill View KM, 3D Surveillance, 3DFS, 3DView, Active Reservoir Surveillance, Adaptive Mesh Refining, ADC, Advanced Data Transfer,
Analysis Model Layering, ARIES, ARIES DecisionSuite, Asset Data Mining, Asset Decision Solutions, Asset Development Center, Asset Development Centre,
Asset Journal, Asset Performance, AssetConnect, AssetConnect Enterprise, AssetConnect Enterprise Express, AssetConnect Expert, AssetDirector,
AssetJournal, AssetLink, AssetLink Advisor, AssetLink Director, AssetLink Observer, AssetObserver, AssetObserver Advisor, AssetOptimizer, AssetPlanner,
AssetPredictor, AssetSolver, AssetSolver Online, AssetView, AssetView 2D, AssetView 3D, Barrier Assurance Monitoring, BLITZPAK, Buckle, CartoSnap,
CasingLife, CasingSeat, CasingWear, CDS Connect, CGMage Builder, Channel Trim, Chronoframe, COMPASS, Contract Generation, Corporate Data
Archiver, Corporate Data Store, Data Analyzer, DataManager, DataServer, DataStar, DataVera, DBPlot, Decision Management System, DecisionSpace,
DecisionSpace 3D Drill View, DecisionSpace 3D Drill View KM, DecisionSpace AssetLink, DecisionSpace AssetPlanner, DecisionSpace AssetSolver,
DecisionSpace Atomic Meshing, DecisionSpace Automated Fault Interpretation, DecisionSpace Base Module, DecisionSpace Data Quality, DecisionSpace
Desktop, DecisionSpace Dropsite, DecisionSpace Fracture Productivity, DecisionSpace Geoscience, DecisionSpace GIS Module, DecisionSpace GRC Module,
DecisionSpace Nexus, DecisionSpace Reservoir, DecisionSuite, Deeper Knowledge. Broader Understanding., DepthTeam, DepthTeam Explorer, DepthTeam
Express, DepthTeam Extreme, DepthTeam Interpreter, Desktop Navigator, DESKTOP-PVT, DESKTOP-VIP, DEX, DIMS, Discovery, Discovery 3D,
Discovery Asset, Discovery Framebuilder, Discovery PowerStation, Discovery Suite, DMS, Drillability Suite, Drilling Desktop, DrillModel, DrillNET, Drill-
to-the-Earth-Model, Drillworks, Drillworks ConnectML, Drillworks Predict, DSS, Dynamic Frameworks to Fill, Dynamic Reservoir Management, Dynamic
Surveillance System, E&P Blueprint, EDM, EDM AutoSync, EDT, eLandmark, Emergent Oilfield, Engineers Data Model, Engineers Desktop, Engineers
Link, ENGINEERING NOTES, eNotes, ESP, Event Similarity Prediction, Exploration Insights, ezFault, ezModel, ezSurface, ezTracker, ezTracker2D,
ezValidator, FastTrack, Field Scenario Planner, FieldPlan, FieldPlan Express, For Production, FrameBuilder, Frameworks to Fill, FZAP!, GeoAtlas,
GeoDataLoad, GeoGraphix, GeoGraphix Exploration System, Geologic Interpretation Component, Geometric Kernel, GeoProbe, GeoProbe GF DataServer,
GeoSmith, GES, GES97, GesFull, GESXplorer, GMAplus, GMI Imager, Grid3D, GRIDGENR, H. Clean, Handheld Field Operator, HHFO, Horizon
Generation, I2 Enterprise, iDIMS, iEnergy, Infrastructure, iNotes, Iso Core, IsoMap, iWellFile, KnowledgeSource, Landmark (as service), Landmark (as
software), Landmark Decision Center, Landmark Field Appliance, LandNetX, Landscape, Large Model, Lattix, Limits, LithoTect, Live Drilling Advisor,
LogEdit, LogM, LogPrep, MagicDesk, Make Great Decisions, MathPack, MDS Connect, MIMIC, MIMIC+, Model Builder, Neftex, NETool, Nexus, Nexus
View, No Well Left Behind, Object MP, OneCall, OpenBooks, OpenEarth, OpenJournal, OpenLink, OpenSGM, OpenVision, OpenWells, OpenWire, OpenWire
Client, OpenWire Production, OpenWire Server, OpenWorks, OpenWorks Development Kit, OpenWorks Well File, Operations Management Suite, PAL,
Parallel-VIP, Parametric Modeling, Permedia, PetrisWINDS, PetrisWINDS Enterprise, PetroBank, PetroBank Explorer, PetroBank Master Data Store,
PetroWorks, PetroWorks Asset, PetroWorks Pro, PetroWorks ULTRA, PLOT EXPRESS, PlotView, Point Gridding Plus, Pointing Dispatcher, PostStack,
PostStack ESP, PostStack Family, Power Interpretation, PowerCalculator, PowerExplorer, PowerExplorer Connect, PowerGrid, PowerHub, PowerModel,
PowerView, PrecisionTarget, Presgraf, PressWorks, PRIZM, Production, Production Asset Manager, PROFILE, Project Administrator, ProMAGIC Connect,
ProMAGIC Server, ProMAX, ProMAX 2D, ProMAX 3D, ProMAX 3DPSDM, ProMAX 4D, ProMAX Family, ProMAX MVA, ProMAX VSP, pSTAx, Query
Builder, Quick, Quick+, QUICKDIF, Quickwell, Quickwell+, Quiklog, QUIKRAY, QUIKSHOT, QUIKVSP, RAVE, RAYMAP+, Real Freedom, Real Time
Asset Management Center, Real Time Decision Center, Real Time Operations Center, Real Time Production Surveillance, Real Time Surveillance, Real-time
View, Recall, Reference Data Manager, Reservoir, Reservoir Framework Builder, RESev, ResMap, RTOC, SCAN, SeisCube, SeisMap, SeisMapX, Seismic
Data Check, SeisModel, SeisSpace, SeisVision, SeisWell, SeisWorks, SeisWorks 2D, SeisWorks 3D, SeisWorks PowerCalculator, SeisWorks PowerJournal,
SeisWorks PowerSection, SeisWorks PowerView, SeisXchange, Semblance Computation and Analysis, Sierra Family, SigmaView, SimConnect, SimConvert,
SimDataStudio, SimResults, SimResults+, SimResults+3D, SIVA+, SLAM, Smart Change, Smart Deploy, Smart Flow, Smart Skills, Smart Start, Smart Sustain,
Smart Transform, Smart Vision, SmartFlow, smartSECTION, smartSTRAT, Spatializer, SpecDecomp, StrataMap, StrataModel, StratAmp, StrataSim,
StratWorks, StratWorks 3D, StreamCalc, StressCheck, STRUCT, Structure Cube, Surf & Connect, SurfNet, SynTool, System Start for Servers, SystemStart,
SystemStart for Clients, SystemStart for Servers, SystemStart for Storage, Tanks & Tubes, TDQ, Team Workspace, TERAS, T-Grid, The Engineers DeskTop,
Total Drilling Performance, TOW/cs, TOW/cs Revenue Interface, TracPlanner, TracPlanner Xpress, Trend Form Gridding, Trimmed Grid, Tubular Basic, Turbo
Synthetics, Unconventional Essentials, VESPA, VESPA+, VIP, VIP-COMP, VIP-CORE, VIPDataStudio, VIP-DUAL, VIP-ENCORE, VIP-EXECUTIVE, VIP-
Local Grid Refinement, VIP-THERM, vSpace, vSpace Blueprint, vSpace Onsite, WavX, Web Editor, Well H. Clean, Well Seismic Fusion, Wellbase, Wellbore
Planner, Wellbore Planner Connect, WELLCAT, WELLPLAN, WellSolver, WellXchange, WOW, Xsection, Youre in Control. Experience the difference.,
ZAP!, ZEH, ZEH Plot, ZetaAnalytics, Z-MAP, Z-MAP Plus, and ZPS are trademarks, registered trademarks, or service marks of Halliburton.
All other trademarks, service marks and product or service names are the trademarks or names of their respective owners.

Note
The information contained in this document is subject to change without notice and should not be construed as a commitment by Halliburton.
Halliburton assumes no responsibility for any error that may appear in this manual. Some states or jurisdictions do not allow disclaimer of expressed
or implied warranties in certain transactions; therefore, this statement may not apply to you.

10ep.3.03 Release Notes Page 130 of 131 March 2017

 DecisionSpace Geosciences 10ep.3.03 Release Notes

Go To Whats In This Release?

Third Party Licenses and Attributions

Halliburton acknowledges that certain third party code has been bundled with, or embedded in, its software. The licensors of this
third party code, and the terms and conditions of their respective licenses, may be found at the following location:

PathNameInInstallationDir/Third_Party.pdf
Disclaimer
The programs and documentation may provide links to external web sites and access to content, products, and services from third
parties. Halliburton is not responsible for the availability of, or any content provided on, third party web sites. You bear all risks
associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is
directly between you and the third party. Halliburton is not responsible for: (a) the quality of third party products or services; or (b)
fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations
related to purchased products or services. Halliburton is not responsible for any loss or damage of any sort that you may incur from
dealing with any third party.

10ep.3.03 Release Notes Page 131 of 131 March 2017