login as: admin

Using keyboard-interactive authentication.

Password:
cluster01::> vserver nfs status
The NFS server is running on Vserver "nas1".
cluster01::> vserver nfs status -
-vserver -is-enabled
cluster01::> vserver nfs status -vserver nas1 -is-enabled
true false
cluster01::> vserver show
show show-protocols
cluster01::> vserver show
Admin Operational Root
Vserver Type Subtype State State Volume Aggregate
----------- ------- ---------- ---------- ----------- ---------- ----------
cluster01 admin - - - - -
cluster01-01
node - - - - -
cluster01-02
node - - - - -
nas1 data default running running nas1_root cluster01_
01_
dataaggr1
nas2 data default running running nas_ dataaggr1
volroot
5 entries were displayed.
cluster01::> vserver h
Error: "h" is not a recognized command
cluster01::> vserver s
san security services show show-protocols
smtape start stop
cluster01::> vserver s
san security services show show-protocols
smtape start stop
cluster01::> vserver show
show show-protocols
cluster01::> vserver show -vserver
cluster01 cluster01-01 cluster01-02 nas1 nas2
cluster01::> vserver show -vserver nas
nas1 nas2
cluster01::> vserver show -vserver nas2 -instance
Vserver: nas2
Vserver Type: data
Vserver Subtype: default
Vserver UUID: e5ebefc7-c6ea-11e6-a110-000c299aae2
d
Root Volume: nas_volroot
Aggregate: dataaggr1
NIS Domain: -
Root Volume Security Style: unix
LDAP Client: -
Default Volume Language Code: C.UTF-8
 Snapshot Policy: default
Comment:
Quota Policy: default
List of Aggregates Assigned: -
Limit on Maximum Number of Volumes allowed: unlimited
Vserver Admin State: running
Vserver Operational State: running
Vserver Operational State Stopped Reason: -
Allowed Protocols: nfs, cifs, fcp, iscsi, ndmp
Disallowed Protocols: -
Is Vserver with Infinite Volume: false
QoS Policy Group: -
Config Lock: false
IPspace Name: Default
cluster01::>
cluster01::>
cluster01::> net interface show
show show-zones
cluster01::> net interface show
(network interface show)
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
Cluster
cluster01-01_clus1
up/up 169.254.39.156/16 cluster01-01 e0a true
cluster01-01_clus2
up/up 169.254.93.22/16 cluster01-01 e0b true
cluster01-02_clus1
up/up 169.254.218.246/16 cluster01-02 e0a true
cluster01-02_clus2
up/up 169.254.20.60/16 cluster01-02 e0b true
cluster01
cluster01-01_mgmt1
up/up 192.168.138.151/24 cluster01-01 e0d true
cluster01-02_mgmt1
up/up 192.168.138.152/24 cluster01-02 e0c true
cluster_mgmt up/up 192.168.138.150/24 cluster01-01 e0d false
nas1
lif1 up/up 192.168.138.153/24 cluster01-01 e0d true
nas2
lif2 up/up 192.168.138.154/24 cluster01-01 e0d true
9 entries were displayed.
cluster01::>
cluster01::>
cluster01::> export-policy show
Vserver Policy Name
--------------- -------------------
nas1 default
nas1 linux
nas2 default
nas2 linux
4 entries were displayed.
cluster01::> export-policy rule show
Policy Rule Access Client RO
Vserver Name Index Protocol Match Rule
------------ --------------- ------ -------- --------------------- ---------
nas1 default 1 any 0.0.0.0/0 any
nas1 linux 1 any 192.168.138.30 any
nas2 linux 1 any 192.168.138.30 any
3 entries were displayed.
cluster01::>
cluster01::>
cluster01::> vserver nfs
create delete kerberos modify off on show start
status stop
cluster01::> vserver nfs show
Vserver: nas1
General Access: true
v3: enabled
v4.0: enabled
4.1: enabled
UDP: enabled
TCP: enabled
Default Windows User: -
Default Windows Group: -
cluster01::> vserver nfs create -vserver nas
nas1 nas2
cluster01::> vserver nfs create -vserver nas2 -access true -v3 enabled -v4.0 ena
bled -tcp enabled
cluster01::>
cluster01::>
cluster01::> vserver nfs show
Vserver: nas1
General Access: true
v3: enabled
v4.0: enabled
4.1: enabled
UDP: enabled
TCP: enabled
Default Windows User: -
Default Windows Group: -
Vserver: nas2
General Access: true
v3: enabled
v4.0: enabled
4.1: disabled
UDP: enabled
TCP: enabled
Default Windows User: -
Default Windows Group: -
2 entries were displayed.
cluster01::> vserver nfs st
start status stop
cluster01::> vserver nfs sta
 start status
cluster01::> vserver nfs stat
stat status
cluster01::> vserver nfs status
Usage:
[-vserver] <vserver name> Vserver
[[-is-enabled] {true|false}] NFS Service Enabled
cluster01::> vserver nfs status -vserver nas
nas1 nas2
cluster01::> vserver nfs status -vserver nasnas
Error: the value "nasnas" is invalid for type <vserver name>
cluster01::> vserver nfs status -vserver nas2
The NFS server is running on Vserver "nas2".
cluster01::> vol show
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
cluster01-01
vol0 aggr0 online RW 807.3MB 250.3MB 68%
cluster01-02
vol0 aggr0_cluster01_02_0
online RW 807.3MB 236.1MB 70%
nas1 nas1_data cluster01_01_dataaggr1
online RW 200MB 189.8MB 5%
nas1 nas1_root cluster01_01_dataaggr1
online RW 20MB 18.86MB 5%
nas2 nas2_data dataaggr1 online RW 300MB 284.8MB 5%
nas2 nas_volroot dataaggr1 online RW 20MB 18.86MB 5%
6 entries were displayed.
cluster01::> network interface show -vserver nas1 -lif lif2 -fields firewall-pol
icy
There are no entries matching your query.
cluster01::> network interface show -vserver nas2 -lif lif2 -fields firewall-pol
icy
vserver lif firewall-policy
------- ---- ---------------
nas2 lif2 data
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method sys -protocol nfs3 -access-type
read-write
Policy Policy Rule
Path Policy Owner Owner Type Index Access
----------------------------- ---------- --------- ---------- ------ ----------
/ default nas_volroot
volume 0 denied
cluster01::>
login as: admin
Using keyboard-interactive authentication.
Password:
cluster01::> export-policy show
Vserver Policy Name
--------------- -------------------
nas1 default
nas1 linux
nas2 default
nas2 linux
4 entries were displayed.
cluster01::> export-policy rule show
Policy Rule Access Client RO
Vserver Name Index Protocol Match Rule
------------ --------------- ------ -------- --------------------- ---------
nas1 default 1 any 0.0.0.0/0 any
nas1 linux 1 any 192.168.138.30 any
nas2 linux 1 any 192.168.138.30 any
3 entries were displayed.
cluster01::> export-policy rule create -policyname default -clientmatch 0.0.0.0/
0 -rorule any -rwrule any
Error: command failed: "vserver" is a required field
cluster01::> export-policy rule create -vserver nas2 -policyname default -client
match 0.0.0.0/0 -rorule any -rwrule any
cluster01::> export-policy rule show
Policy Rule Access Client RO
Vserver Name Index Protocol Match Rule
------------ --------------- ------ -------- --------------------- ---------
nas1 default 1 any 0.0.0.0/0 any
nas1 linux 1 any 192.168.138.30 any
nas2 default 1 any 0.0.0.0/0 any
nas2 linux 1 any 192.168.138.30 any
4 entries were displayed.
cluster01::> vserver export-policy check-access -vserver nas1 -volume nas1_data
-client-ip 192.168.138.30 -authentication-method sys -protocol nfs3 -access-type
read-wri
Policy Policy Rule
Path Policy Owner Owner Type Index Access
----------------------------- ---------- --------- ---------- ------ ----------
/ default nas1_root volume 1 read
/linux linux nas1_data volume 1 read-write
2 entries were displayed.
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method sys -protocol nfs3 -access-type
read-write
Policy Policy Rule
Path Policy Owner Owner Type Index Access
----------------------------- ---------- --------- ---------- ------ ----------
/ default nas_volroot
volume 1 read
/linux linux nas2_data volume 1 read-write
2 entries were displayed.
cluster01::> vserver export-policy check-access -client-ip 192.168.138.30 -authe
ntication-method sys -protocol nfs3 -access-type read-write
Error: show failed: "vserver" is a required field
cluster01::> vserver export-policy check-access -vserver -volume nas2_data -clie
nt-ip 192.168.138.30 -authentication-method sys -protocol nfs3 -access-type read
-write
Error: Missing value for -vserver. If you want to only display certain fields, p
lease use -fields <list of fields>.
cluster01::> export-policy show
Vserver Policy Name
--------------- -------------------
nas1 default
nas1 linux
nas2 default
nas2 linux
4 entries were displayed.
cluster01::> export-policy rule show
Policy Rule Access Client RO
Vserver Name Index Protocol Match Rule
------------ --------------- ------ -------- --------------------- ---------
nas1 default 1 any 0.0.0.0/0 any
nas1 linux 1 any 192.168.138.30 any
nas2 default 1 any 0.0.0.0/0 any
nas2 linux 1 any 192.168.138.30 any
4 entries were displayed.
cluster01::> vol show
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
cluster01-01
vol0 aggr0 online RW 807.3MB 238.0MB 70%
cluster01-02
vol0 aggr0_cluster01_02_0
online RW 807.3MB 220.1MB 72%
nas1 nas1_data cluster01_01_dataaggr1
online RW 200MB 189.8MB 5%
nas1 nas1_root cluster01_01_dataaggr1
online RW 20MB 18.86MB 5%
nas2 nas2_data dataaggr1 online RW 300MB 284.8MB 5%
nas2 nas_volroot dataaggr1 online RW 20MB 18.86MB 5%
6 entries were displayed.
cluster01::> vol show -vserver nas2 -fi
-filesystem-size -files -files-used
-filesys-size-fixed -fields
cluster01::> vol show -vserver nas2 -fields policy
vserver volume policy
------- --------- ------
nas2 nas2_data linux
nas2 nas_volroot
default
2 entries were displayed.
cluster01::> vol mount
Usage:
-vserver <vserver name> Vserver Name
[-volume] <volume name> Volume Name
[-junction-path] <junction path> Junction Path Of The Mounting Volume
[[-active] {true|false}] Activate Junction Path (default: true)
[ -policy-override {true|false} ] Override The Export Policy (default: false)
cluster01::> vol mount -vserver nas2 -volume nas2_data -junction-path /linux
cluster01::>
cluster01::> network interface show
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
Cluster
cluster01-01_clus1
up/up 169.254.39.156/16 cluster01-01 e0a true
cluster01-01_clus2
up/up 169.254.93.22/16 cluster01-01 e0b true
cluster01-02_clus1
up/up 169.254.218.246/16 cluster01-02 e0a true
cluster01-02_clus2
up/up 169.254.20.60/16 cluster01-02 e0b true
cluster01
cluster01-01_mgmt1
up/up 192.168.138.151/24 cluster01-01 e0d true
cluster01-02_mgmt1
up/up 192.168.138.152/24 cluster01-02 e0c true
cluster_mgmt up/up 192.168.138.150/24 cluster01-01 e0d false
nas1
lif1 up/up 192.168.138.153/24 cluster01-01 e0d true
nas2
lif2 up/up 192.168.138.154/24 cluster01-01 e0d true
9 entries were displayed.
cluster01::> ping 192.168.138.151
Error: command failed: "node" is a required field
cluster01::> ping 192.168.138.30
Error: command failed: "node" is a required field
cluster01::> node ping 192.168.138.30
Error: "ping" is not a recognized command
cluster01::> network interface show
show show-zones
cluster01::> network interface show
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
Cluster
cluster01-01_clus1
up/up 169.254.39.156/16 cluster01-01 e0a true
cluster01-01_clus2
up/up 169.254.93.22/16 cluster01-01 e0b true
cluster01-02_clus1
up/up 169.254.218.246/16 cluster01-02 e0a true
cluster01-02_clus2
up/up 169.254.20.60/16 cluster01-02 e0b true
cluster01
cluster01-01_mgmt1
up/up 192.168.138.151/24 cluster01-01 e0d true
cluster01-02_mgmt1
up/up 192.168.138.152/24 cluster01-02 e0c true
 cluster_mgmt up/up 192.168.138.150/24 cluster01-01 e0d false
nas1
lif1 up/up 192.168.138.153/24 cluster01-01 e0d true
nas2
lif2 up/up 192.168.138.154/24 cluster01-01 e0d true
9 entries were displayed.
cluster01::> version e
Error: the value "e" is invalid for type <nodename>
cluster01::> version -node cluster01-0
cluster01-01 cluster01-02
cluster01::> vserver
active-directory add-aggregates add-protocols audit
check cifs context create
dashboard data-policy delete export-policy
fcp fpolicy group-mapping iscsi
locks modify name-mapping nfs
peer remove-aggregates remove-protocols rename
san security services show
show-protocols smtape start stop
vscan
cluster01::> vserver export-policy
cache check-access copy create delete
netgroup rename rule show
cluster01::> vserver export-policy check-access -vserver nas
nas1 nas2
cluster01::> vserver export-policy check-access -vserver nas2 -volume
<volume name> Volume Name
cluster01::> vserver export-policy check-access -vserver nas2 -volume
<volume name> Volume Name
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip
<IP Address> Client Address
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method
none krb5 krb5i ntlm sys
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method
none krb5 krb5i ntlm sys
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method sys -protocol
nfs3 nfs4 cifs flexcache
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method
Error: Missing value for -authentication-method. If you want to only display cer
tain fields, please use -fields <list of fields>.
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30
Error: show failed: "authentication-method" is a required field
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method
 none krb5 krb5i ntlm sys
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method sys -protocol
nfs3 nfs4 cifs flexcache
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method sys -protocol nfs
nfs3 nfs4
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method sys -protocol nfsv3
Error: "nfsv3" is an invalid value for field "-protocol <Client Access Protocol>
"
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method sys -protocol nfs3
Error: show failed: "access-type" is a required field
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method sys -protocol nfs3 -access-type
read
read read-write
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method sys -protocol nfs3 -access-type
read -
-instance -qtree -path
-policy -policy-owner -policy-owner-type
-rule-index -access -partial-rule-match
-fields
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method sys -protocol nfs3 -access-type
read-write -
-instance -qtree -path
-policy -policy-owner -policy-owner-type
-rule-index -access -partial-rule-match
-fields
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method sys -protocol nfs3 -access-type
read-write -
Error: Ambiguous argument. Possible matches include:
-instance
-vserver
-volume
-client-ip
-authentication-method
-protocol
-access-type
-qtree
-path
-policy
-policy-owner
-policy-owner-type
-rule-index
-access
-partial-rule-match
-fields
cluster01::> vserver export-policy check-access -vserver nas2 -volume nas2_data
-client-ip 192.168.138.30 -authentication-method sys -protocol nfs3 -access-type
read-write
Policy Policy Rule
Path Policy Owner Owner Type Index Access
----------------------------- ---------- --------- ---------- ------ ----------
/ default nas_volroot
volume 1 read
/linux linux nas2_data volume 1 read-write
2 entries were displayed.
cluster01::> export-policy rule show -vserver nas
nas1 nas2
cluster01::> export-policy rule show -vserver nas2
Policy Rule Access Client RO
Vserver Name Index Protocol Match Rule
------------ --------------- ------ -------- --------------------- ---------
nas2 default 1 any 0.0.0.0/0 any
nas2 linux 1 any 192.168.138.30 any
2 entries were displayed.
cluster01::>
cluster01::>
cluster01::>
cluster01::>
cluster01::> vserver create -vserver nas3 -rootvolume
-rootvolume -rootvolume-security-style
cluster01::> vol show
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
cluster01-01
vol0 aggr0 online RW 807.3MB 222.5MB 72%
cluster01-02
vol0 aggr0_cluster01_02_0
online RW 807.3MB 205.7MB 74%
nas1 nas1_data cluster01_01_dataaggr1
online RW 200MB 189.8MB 5%
nas1 nas1_root cluster01_01_dataaggr1
online RW 20MB 18.86MB 5%
nas2 nas2_data dataaggr1 online RW 300MB 284.8MB 5%
nas2 nas_volroot dataaggr1 online RW 20MB 18.86MB 5%
6 entries were displayed.
cluster01::> vserver create -vserver nas3 -rootvolume
-rootvolume -rootvolume-security-style
cluster01::> vserver create -vserver nas3 -rootvolume nas3_root -subtype default
-aggregate dataaggr1 -rootvolume-security-style windows
Error: the value "windows" is invalid for type <security style>
cluster01::> vserver create -vserver nas3 -rootvolume nas3_root -subtype default
-aggregate dataaggr1 -rootvolume-security-style ntfs
[Job 78] Job succeeded:
Vserver creation completed
cluster01::>
cluster01::>
cluster01::> vol create -vserver nas3 -volume volnt -aggregate dataaggr1 -size 3
00m -state online -type RW -policy win -junction-path /win
Error: command failed: Ruleset win not found. Reason: entry doesn't exist.
cluster01::> network interface show
 Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
Cluster
cluster01-01_clus1
up/up 169.254.39.156/16 cluster01-01 e0a true
cluster01-01_clus2
up/up 169.254.93.22/16 cluster01-01 e0b true
cluster01-02_clus1
up/up 169.254.218.246/16 cluster01-02 e0a true
cluster01-02_clus2
up/up 169.254.20.60/16 cluster01-02 e0b true
cluster01
cluster01-01_mgmt1
up/up 192.168.138.151/24 cluster01-01 e0d true
cluster01-02_mgmt1
up/up 192.168.138.152/24 cluster01-02 e0c true
cluster_mgmt up/up 192.168.138.150/24 cluster01-01 e0d false
nas1
lif1 up/up 192.168.138.153/24 cluster01-01 e0d true
nas2
lif2 up/up 192.168.138.154/24 cluster01-01 e0d true
9 entries were displayed.
cluster01::> network interface create -vserver nas3 -lif lif3 -role data -data-p
rotooc
Error: invalid argument "-data-protooc"
cluster01::> network interface create -vserver nas3 -lif lif3 -role data -data-p
rotocol cifs,nfs,fcache -home-node cluster01-01 -home-port eod -address 192.168.
138.155 -netmask 255.255.25.0
Error: command failed: eod is an invalid port on node cluster01-01.
cluster01::> network interface create -vserver nas3 -lif lif3 -role data -data-p
rotocol cifs,nfs,fcache -home-node cluster01-01 -home-port eoc -address 192.168.
138.155 -netmask 255.255.25.0
Error: command failed: eoc is an invalid port on node cluster01-01.
cluster01::> port show
Speed (Mbps)
Node Port IPspace Broadcast Domain Link MTU Admin/Oper
------ --------- ------------ ---------------- ----- ------- ------------
cluster01-01
e0a Cluster Cluster up 1500 auto/1000
e0b Cluster Cluster up 1500 auto/1000
e0c Default Default up 1500 auto/1000
e0d Default Default up 1500 auto/1000
cluster01-02
e0a Cluster Cluster up 1500 auto/1000
e0b Cluster Cluster up 1500 auto/1000
e0c Default Default up 1500 auto/1000
e0d Default Default up 1500 auto/1000
8 entries were displayed.
cluster01::> network interface create -vserver nas3 -lif lif3 -role data -data-p
rotocol cifs,nfs,fcache -home-node cluster01-01 -home-port eoc -address 192.168.
138.155 -netmask 255.255.255.0
Error: command failed: eoc is an invalid port on node cluster01-01.
cluster01::> vserver show
show show-protocols
cluster01::> vserver show
Admin Operational Root
Vserver Type Subtype State State Volume Aggregate
----------- ------- ---------- ---------- ----------- ---------- ----------
cluster01 admin - - - - -
cluster01-01
node - - - - -
cluster01-02
node - - - - -
nas1 data default running running nas1_root cluster01_
01_
dataaggr1
nas2 data default running running nas_ dataaggr1
volroot
nas3 data default running running nas3_root dataaggr1
6 entries were displayed.
cluster01::> network interface create -vserver nas3 -lif lif3 -role data -data-p
rotocol cifs,nfs,fcache -home-node cluster01-01 -home-port e0c -address 192.168.
138.155 -netmask 255.255.255.0
Warning: The configured failover-group has insufficient remote failover targets
for the LIF's failover-policy. To view the failover targets for a LIF, use the "
network
interface show -failover" command.
cluster01::>
cluster01::>
cluster01::> net int show
show show-zones
cluster01::> net int show
(network interface show)
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
Cluster
cluster01-01_clus1
up/up 169.254.39.156/16 cluster01-01 e0a true
cluster01-01_clus2
up/up 169.254.93.22/16 cluster01-01 e0b true
cluster01-02_clus1
up/up 169.254.218.246/16 cluster01-02 e0a true
cluster01-02_clus2
up/up 169.254.20.60/16 cluster01-02 e0b true
cluster01
cluster01-01_mgmt1
up/up 192.168.138.151/24 cluster01-01 e0d true
cluster01-02_mgmt1
up/up 192.168.138.152/24 cluster01-02 e0c true
cluster_mgmt up/up 192.168.138.150/24 cluster01-01 e0d false
nas1
lif1 up/up 192.168.138.153/24 cluster01-01 e0d true
nas2
lif2 up/up 192.168.138.154/24 cluster01-01 e0d true
nas3
lif3 up/up 192.168.138.155/24 cluster01-01 e0c true
10 entries were displayed.
cluster01::> vserver
active-directory add-aggregates add-protocols audit
check cifs context create
dashboard data-policy delete export-policy
fcp fpolicy group-mapping iscsi
locks modify name-mapping nfs
peer remove-aggregates remove-protocols rename
san security services show
show-protocols smtape start stop
vscan
cluster01::> vserver cifs
add-netbios-aliases branchcache character-mapping
create delete domain
group-policy home-directory modify
nbtstat options remove-netbios-aliases
security session share
show start stop
symlink users-and-groups
cluster01::> vserver cifs create -vserver nas
nas1 nas2 nas3
cluster01::> vserver cifs create -vserver nas3 -cifs-server
<NetBIOS> CIFS Server NetBIOS Name
cluster01::> vserver cifs create -vserver nas3 -cifs-server
<NetBIOS> CIFS Server NetBIOS Name
cluster01::> vserver cifs create -vserver nas3 -cifs-server nas3 -domain
<TextNoCase> Fully Qualified Domain Name
cluster01::> vserver cifs
add-netbios-aliases branchcache character-mapping
create delete domain
group-policy home-directory modify
nbtstat options remove-netbios-aliases
security session share
show start stop
symlink users-and-groups
cluster01::> vserver cifs start
Usage:
[-vserver] <vserver name> Vserver
cluster01::> vserver cifs s
security session share show start stop symlink
cluster01::> vserver cifs start -vserver
<vserver name> Vserver
cluster01::> vserver cifs create -vserver nas
nas1 nas2 nas3
cluster01::> vserver cifs create -vserver nas3 -cifs-server
<NetBIOS> CIFS Server NetBIOS Name
cluster01::> vserver cifs create -vserver nas3 -cifs-server nas3 -domain
<TextNoCase> Fully Qualified Domain Name
cluster01::> vserver cifs create -vserver nas3 -cifs-server nas3 -domain storage
.com -ou CN=Computers -default-site "" -status-admin up -comment "" -netbios-ali
ases
<NetBIOS> List of NetBIOS Aliases
cluster01::> vserver cifs create -vserver nas3 -cifs-server nas3 -domain storage
.com -ou CN=Computers -default-site "" -status-admin up -comment "" ?
[ -netbios-aliases <NetBIOS>, ... ] List of NetBIOS Aliases
cluster01::> vserver cifs create -vserver nas3 -cifs-server nas3 -domain storage
.com -ou CN=Computers -default-site "" -status-admin up -comment "" ?
[ -netbios-aliases <NetBIOS>, ... ] List of NetBIOS Aliases
cluster01::> vserver cifs create -vserver nas3 -cifs-server nas3 -domain storage
.com -ou CN=Computers -default-site "" -status-admin up ?
[ -comment <text (size 0..256)> ] CIFS Server Description (default: "")
[ -netbios-aliases <NetBIOS>, ... ] List of NetBIOS Aliases
cluster01::> vserver cifs create -vserver nas3 -cifs-server nas3 -domain storage
.com -ou CN=Computers -default-site "" -status-admin up
Error: command failed: Cannot find a suitable DNS server. Check your Vserver's D
NS configuration.
cluster01::> set advanced
Warning: These advanced commands are potentially dangerous; use them only when d
irected to do so by NetApp personnel.
Do you want to continue? {y|n}: y
cluster01::*>
cluster01::*>
cluster01::*> vserver
active-directory add-aggregates add-protocols
audit check cifs
config-replication context create
dashboard data-policy delete
export-policy fcp fpolicy
group-mapping iscsi locks
modify name-mapping nfs
peer prepare-for-revert remove-aggregates
remove-protocols rename san
security services show
show-protocols smtape start
stop unlock vscan
cluster01::*> vserver cifs
add-netbios-aliases branchcache character-mapping
create delete domain
group-policy home-directory modify
nbtstat netbios-alias options
prepare-to-downgrade remove-netbios-aliases security
session share show
start stop superuser
symlink users-and-groups
cluster01::*> cifs
add-netbios-aliases branchcache character-mapping
create delete domain
group-policy home-directory modify
nbtstat netbios-alias options
prepare-to-downgrade remove-netbios-aliases security
session share show
start stop superuser
symlink users-and-groups
cluster01::*> cifs create -vserver nas
nas1 nas2 nas3
cluster01::*> cifs create -vserver nas3 -cifs-server
<NetBIOS> CIFS Server NetBIOS Name
cluster01::*> cifs create -vserver nas3 -cifs-server nas3 -domain
<TextNoCase> Fully Qualified Domain Name
cluster01::*> cifs create -vserver nas3 -cifs-server nas3 -domain storage.com -o
u CN=Computers -default-site "" -status-admin up -comment "" -netbios-aliases
<NetBIOS> List of NetBIOS Aliases
cluster01::*> cifs create -vserver nas3 -cifs-server nas3 -domain storage.com -o
u CN=Computers -default-site "" -status-admin up -comment "" -netbios-aliases na
s3
Error: command failed: Cannot find a suitable DNS server. Check your Vserver's D
NS configuration.
cluster01::*> vserver
active-directory add-aggregates add-protocols
audit check cifs
config-replication context create
dashboard data-policy delete
export-policy fcp fpolicy
group-mapping iscsi locks
modify name-mapping nfs
peer prepare-for-revert remove-aggregates
remove-protocols rename san
security services show
show-protocols smtape start
stop unlock vscan
cluster01::*> vserver dn
Error: "dn" is not a recognized command
cluster01::*> vserver dns
Error: "dns" is not a recognized command
cluster01::*> vserver dns
Error: "dns" is not a recognized command
cluster01::*> vserver se
security services
cluster01::*> vserver services
dns ldap name-service ndmp netgroup
nis-domain unix-group unix-user web
cluster01::*> vserver services dns
clear-statistics create delete dynamic-update
hosts modify show show-statistics
cluster01::*> vserver services dns create -vserver
cluster01 nas1 nas2 nas3
cluster01::*> vserver services dns create -vserver nas3 -domains
<text> Domains
cluster01::*> vserver services dns create -vserver nas3 -domains storage.com -ti
meout 2 -attempts 1 -is-tld-query-enabled true -
-name-servers -state
cluster01::*> vserver services dns create -vserver nas3 -domains storage.com -ti
meout 2 -attempts 1 -is-tld-query-enabled true
Warning: "DNS" is present as one of the sources in one or more ns-switch databas
es but no valid DNS configuration was found for Vserver "nas3". Remove "DNS" fro
m
ns-switch using the "vserver services name-service ns-switch" command.
Configuring "DNS" as a source in the ns-switch setting when there is no valid
configuration can cause protocol access issues.
cluster01::*>
cluster01::*>
cluster01::*>
cluster01::*> vserver se
security services
cluster01::*> vserver services dns show
show show-statistics
cluster01::*> vserver services dns show
Name
Vserver State Domains Servers
--------------- --------- ----------------------------------- ----------------
nas3 disabled storage.com -
cluster01::*>
cluster01::*>
cluster01::*>
cluster01::*>
cluster01::*> vserver se
security services
cluster01::*> vserver services
dns ldap name-service ndmp netgroup
nis-domain unix-group unix-user web
cluster01::*> vserver services dns
clear-statistics create delete dynamic-update
hosts modify show show-statistics
cluster01::*> vserver services dns modify -
-vserver -domains -name-servers
-state -timeout -attempts
-is-tld-query-enabled
cluster01::*> vserver services dns modify -state
enabled disabled
cluster01::*> vserver services dns modify -state enabled
cluster01::*>
cluster01::*>
cluster01::*> vserver services dns show
Name
Vserver State Domains Servers
--------------- --------- ----------------------------------- ----------------
nas3 enabled storage.com -
cluster01::*>
cluster01::*>
cluster01::*>
cluster01::*> vserver cifs create -vserver nas
nas1 nas2 nas3
cluster01::*> vserver cifs create -vserver nas3 -cifs-server
<NetBIOS> CIFS Server NetBIOS Name
cluster01::*> vserver cifs create -vserver nas3 -cifs-server nas3 -domain
<TextNoCase> Fully Qualified Domain Name
cluster01::*> vserver cifs create -vserver nas3 -cifs-server nas3 -domain storag
e.com -ou CN=Computers -default-site "" -status-admin up -comment ""
In order to create an Active Directory machine account for the CIFS server, you
must supply the name and password of a Windows account with sufficient privilege
s to
add computers to the "CN=Computers" container within the "STORAGE.COM" domain.
Enter the user name: administrator
Enter the password:
Error: Machine account creation procedure failed
[ 34 ms] Trying to create machine account 'NAS3' in domain
'STORAGE.COM' for Vserver 'nas3'
**[ 75] FAILURE: No servers configured for DNS
[ 197] No servers configured for DNS
[ 197] Unable to contact DNS to discover domain controllers.
[ 197] Unable to connect to any (0) domain controllers.
[ 197] 'NisDomain' configuration not available
[ 197] NIS configuration not found for Vserver 5
[ 206] No servers configured for DNS
[ 207] Unable to contact DNS to discover domain controllers.
[ 211] No servers configured for DNS
[ 211] Unable to contact DNS to discover domain controllers.
[ 216] No servers configured for DNS
[ 216] Unable to contact DNS to discover domain controllers.
[ 219] 'CifsServerSecurity' configuration not available
[ 219] No servers available for MS_LDAP_AD, vserver: 5, domain:
STORAGE.COM.
[ 219] Failed to find a domain controller
Error: command failed: Failed to create the Active Directory machine account "NA
S3". Reason: SecD Error: no server available.
cluster01::*> png 192.168.138.21
Error: "png" is not a recognized command
cluster01::*> png 192.168.138.26
Error: "png" is not a recognized command
cluster01::*> network ping
ping ping6
cluster01::*> network ping -node cluster01-0
cluster01-01 cluster01-02
cluster01::*> network ping -node cluster01-01 -destination
<Remote InetAddress> Destination
cluster01::*> network ping -node cluster01-01 -destination
<Remote InetAddress> Destination
cluster01::*> network ping -node cluster01-01 -destination 192.168.138.26
192.168.138.26 is alive
cluster01::*>
cluster01::*>
cluster01::*>
cluster01::*> vserver cifs create -vserver nas3 -cifs-server nas3 -domain storag
e.com -ou CN=Computers -default-site "" -status-admin up -comment ""
In order to create an Active Directory machine account for the CIFS server, you
must supply the name and password of a Windows account with sufficient privilege
s to
add computers to the "CN=Computers" container within the "STORAGE.COM" domain.
Enter the user name: administrator
Enter the password:
Error: Machine account creation procedure failed
[ 0 ms] Trying to create machine account 'NAS3' in domain
'STORAGE.COM' for Vserver 'nas3'
**[ 5] FAILURE: No servers configured for DNS
[ 22] No servers configured for DNS
[ 22] Unable to contact DNS to discover domain controllers.
[ 23] Unable to connect to any (0) domain controllers.
[ 23] 'NisDomain' configuration not available
[ 23] NIS configuration not found for Vserver 5
[ 38] No servers configured for DNS
[ 39] Unable to contact DNS to discover domain controllers.
[ 50] No servers configured for DNS
[ 50] Unable to contact DNS to discover domain controllers.
[ 57] No servers configured for DNS
[ 58] Unable to contact DNS to discover domain controllers.
[ 58] 'CifsServerSecurity' configuration not available
[ 58] No servers available for MS_LDAP_AD, vserver: 5, domain:
STORAGE.COM.
[ 58] Failed to find a domain controller
Error: command failed: Failed to create the Active Directory machine account "NA
S3". Reason: SecD Error: no server available.
cluster01::*> vserver
active-directory add-aggregates add-protocols
audit check cifs
config-replication context create
dashboard data-policy delete
export-policy fcp fpolicy
group-mapping iscsi locks
modify name-mapping nfs
peer prepare-for-revert remove-aggregates
remove-protocols rename san
security services show
show-protocols smtape start
stop unlock vscan
cluster01::*> vserver se
security services
cluster01::*> vserver set
Error: "set" is not a recognized command
cluster01::*> vserver
active-directory add-aggregates add-protocols
audit check cifs
 config-replication context create
dashboard data-policy delete
export-policy fcp fpolicy
group-mapping iscsi locks
modify name-mapping nfs
peer prepare-for-revert remove-aggregates
remove-protocols rename san
security services show
show-protocols smtape start
stop unlock vscan
cluster01::*> vserver cifs create -vserver nas3 -cifs-server nas3 -domain storag
e.com -ou CN=Computers -default-site "" -status-admin up -comment ""
In order to create an Active Directory machine account for the CIFS server, you
must supply the name and password of a Windows account with sufficient privilege
s to
add computers to the "CN=Computers" container within the "STORAGE.COM" domain.
Enter the user name: administrator
Enter the password:
Error: Machine account creation procedure failed
[ 0 ms] Trying to create machine account 'NAS3' in domain
'STORAGE.COM' for Vserver 'nas3'
**[ 5] FAILURE: No servers configured for DNS
[ 23] No servers configured for DNS
[ 23] Unable to contact DNS to discover domain controllers.
[ 23] Unable to connect to any (0) domain controllers.
[ 23] 'NisDomain' configuration not available
[ 23] NIS configuration not found for Vserver 5
[ 33] No servers configured for DNS
[ 33] Unable to contact DNS to discover domain controllers.
[ 39] No servers configured for DNS
[ 40] Unable to contact DNS to discover domain controllers.
[ 46] No servers configured for DNS
[ 46] Unable to contact DNS to discover domain controllers.
[ 46] 'CifsServerSecurity' configuration not available
[ 46] No servers available for MS_LDAP_AD, vserver: 5, domain:
STORAGE.COM.
[ 46] Failed to find a domain controller
Error: command failed: Failed to create the Active Directory machine account "NA
S3". Reason: SecD Error: no server available.
cluster01::*> vserver cifs create -vserver nas3 -cifs-server nas3 -domain storag
e.com -ou CN=Computers -default-site "" -status-admin up -comment ""
In order to create an Active Directory machine account for the CIFS server, you
must supply the name and password of a Windows account with sufficient privilege
s to
add computers to the "CN=Computers" container within the "STORAGE.COM" domain.
Enter the user name: storage\administrator
Error: command failed: Username format not supported. Use either "user" or "user
@ad.domain".
cluster01::*> vserver cifs create -vserver nas3 -cifs-server nas3 -domain storag
e.com -ou CN=Computers -default-site "" -status-admin up -comment ""
In order to create an Active Directory machine account for the CIFS server, you
must supply the name and password of a Windows account with sufficient privilege
s to
add computers to the "CN=Computers" container within the "STORAGE.COM" domain.
Enter the user name: [email protected]
Enter the password:
Error: Machine account creation procedure failed
[ 0 ms] Trying to create machine account 'NAS3' in domain
'STORAGE.COM' for Vserver 'nas3'
**[ 2] FAILURE: No servers configured for DNS
[ 17] No servers configured for DNS
[ 18] Unable to contact DNS to discover domain controllers.
[ 18] Unable to connect to any (0) domain controllers.
[ 18] 'NisDomain' configuration not available
[ 18] NIS configuration not found for Vserver 5
[ 32] No servers configured for DNS
[ 33] Unable to contact DNS to discover domain controllers.
[ 46] No servers configured for DNS
[ 46] Unable to contact DNS to discover domain controllers.
[ 54] No servers configured for DNS
[ 54] Unable to contact DNS to discover domain controllers.
[ 55] 'CifsServerSecurity' configuration not available
[ 55] No servers available for MS_LDAP_AD, vserver: 5, domain:
STORAGE.COM.
[ 55] Failed to find a domain controller
Error: command failed: Failed to create the Active Directory machine account "NA
S3". Reason: SecD Error: no server available.
cluster01::*> network ping -node cluster01-01 -destination 192.168.138.26
192.168.138.26 is alive
cluster01::*> network ping -node cluster01-01 -destination 192.168.138.27
192.168.138.27 is alive
cluster01::*>
cluster01::*>
cluster01::*>
cluster01::*>
cluster01::*> vserver
active-directory add-aggregates add-protocols
audit check cifs
config-replication context create
dashboard data-policy delete
export-policy fcp fpolicy
group-mapping iscsi locks
modify name-mapping nfs
peer prepare-for-revert remove-aggregates
remove-protocols rename san
security services show
show-protocols smtape start
stop unlock vscan
cluster01::*> vserver se
security services
cluster01::*> vserver se
security services
cluster01::*> vserver set
Error: "set" is not a recognized command
cluster01::*> vserver set
Error: "set" is not a recognized command
cluster01::*> vserver set
Error: "set" is not a recognized command
cluster01::*> vserver setu
Error: "setu" is not a recognized command
cluster01::*> vserver setu
Error: "setu" is not a recognized command
cluster01::*> set admin
cluster01::> vserver
active-directory add-aggregates add-protocols audit
check cifs context create
dashboard data-policy delete export-policy
fcp fpolicy group-mapping iscsi
locks modify name-mapping nfs
peer remove-aggregates remove-protocols rename
san security services show
show-protocols smtape start stop
vscan
cluster01::> vserver se
security services
cluster01::> cluster
contact-info create date ha identity
image join log-forwarding peer setup
show statistics time-service
cluster01::> cluster vs
Error: "vs" is not a recognized command
cluster01::> vserver
active-directory add-aggregates add-protocols audit
check cifs context create
dashboard data-policy delete export-policy
fcp fpolicy group-mapping iscsi
locks modify name-mapping nfs
peer remove-aggregates remove-protocols rename
san security services show
show-protocols smtape start stop
vscan
cluster01::> vserver cifs
add-netbios-aliases branchcache character-mapping
create delete domain
group-policy home-directory modify
nbtstat options remove-netbios-aliases
security session share
 show start stop
symlink users-and-groups
cluster01::> vserver cifs domain
discovered-servers name-mapping-search password
preferred-dc trusts
cluster01::> vserver cifs domain discovered-servers
reset-servers show
cluster01::> vserver cifs domain discovered-servers sj
Error: "sj" is not a recognized command
cluster01::> vserver cifs domain discovered-servers show
This table is currently empty.
cluster01::> vserver se
security services
cluster01::> vserver se
security services
cluster01::> vserver services dns
create delete dynamic-update hosts modify
show
cluster01::> vserver services dns show
Name
Vserver State Domains Servers
--------------- --------- ----------------------------------- ----------------
nas3 enabled storage.com -
cluster01::> vserver
active-directory add-aggregates add-protocols audit
check cifs context create
dashboard data-policy delete export-policy
fcp fpolicy group-mapping iscsi
locks modify name-mapping nfs
peer remove-aggregates remove-protocols rename
san security services show
show-protocols smtape start stop
vscan
cluster01::> vserver se
security services
cluster01::> vserver services dns
create delete dynamic-update hosts modify
show
cluster01::> vserver services dns modify -
-vserver -domains -name-servers -state -timeout
-attempts
cluster01::> vserver services dns modify -name-servers
<IP Address> Name Servers
cluster01::> vserver services dns modify -name-servers 192.168.138.26
cluster01::> vserver services dns show
Name
Vserver State Domains Servers
--------------- --------- ----------------------------------- ----------------
nas3 enabled storage.com 192.168.138.26
cluster01::> vserver cifs create -vserver nas3 -cifs-server nas3 -domain storage
.com -ou CN=Computers -default-site "" -status-admin up -comment ""
In order to create an Active Directory machine account for the CIFS server, you
must supply the name and password of a Windows account with sufficient privilege
s to
add computers to the "CN=Computers" container within the "STORAGE.COM" domain.
Enter the user name: administrator.storage.com
Enter the password:
Error: Machine account creation procedure failed
[ 428] Loaded the preliminary configuration.
**[ 600] FAILURE: Could not authenticate as
** '[email protected]': Unknown user
** (KRB5KDC_ERR_C_PRINCIPAL_UNKNOWN)
Error: command failed: Failed to create the Active Directory machine account "NA
S3". Reason: Kerberos Error: Invalid credentials were given.
cluster01::> vserver cifs create -vserver nas3 -cifs-server nas3 -domain storage
.com -ou CN=Computers -default-site "" -status-admin up -comment ""
In order to create an Active Directory machine account for the CIFS server, you
must supply the name and password of a Windows account with sufficient privilege
s to
add computers to the "CN=Computers" container within the "STORAGE.COM" domain.
Enter the user name: administrator
Enter the password:
cluster01::> vise
Error: "vise" is not a recognized command
cluster01::> vserver cifs
add-netbios-aliases branchcache character-mapping
create delete domain
group-policy home-directory modify
nbtstat options remove-netbios-aliases
security session share
show start stop
symlink users-and-groups
cluster01::> vserver cifs sh
share show
cluster01::> vserver cifs show
Server Status Domain/Workgroup Authentication
Vserver Name Admin Name Style
----------- --------------- --------- ---------------- --------------
nas3 NAS3 up STORAGE domain
cluster01::> vserver cifs shares
Vserver context has not been set.
cluster01::> vol show
show show-footprint show-space
cluster01::> vol show -vserver
Cluster cluster01 cluster01-01 cluster01-02 nas1
nas2 nas3
cluster01::> vol show -vserver nas
nas1 nas2 nas3
cluster01::> vol show -vserver nas3 -volume nas3_root -fields policy
vserver volume policy
------- --------- -------
nas3 nas3_root default
cluster01::> export-policy rule show -vserver nas
nas1 nas2 nas3
cluster01::> export-policy rule show -vserver nas3 -policyname default
There are no entries matching your query.
cluster01::> export-policy rule show -vserver nas
nas1 nas2 nas3
cluster01::> export-policy rule show -vserver nas3 -policyname default -ruleinde
x
<integer> Rule Index
cluster01::> export-policy rule show -vserver nas3 -policyname default -ruleinde
x
<integer> Rule Index
cluster01::> export-policy rule show -vserver nas3 -policyname default -ruleinde
x 1 -
-instance -protocol -clientmatch -rorule -rwrule
-anon -superuser -allow-suid -allow-dev -fields
cluster01::> export-policy rule create -vserver nas
nas1 nas2 nas3
cluster01::> export-policy rule create -vserver nas3 -policyname default -client
match
<text> Client Match Hostname, IP Address, Netgroup, or Do
main
cluster01::> export-policy rule create -vserver nas3 -policyname default -client
match 0.0.0.0/0 -rorule
any none never krb5 krb5i ntlm sys
cluster01::> export-policy rule create -vserver nas3 -policyname default -client
match 0.0.0.0/0 -rorule any -rwrule
any none never krb5 krb5i ntlm sys
cluster01::> export-policy rule create -vserver nas3 -policyname default -client
match 0.0.0.0/0 -rorule any -rwrule any
cluster01::>
cluster01::>
cluster01::> vserver export-policy check-access -vserver nas
nas1 nas2 nas3
cluster01::> vserver export-policy check-access -vserver nas3 -volume
<volume name> Volume Name
cluster01::> vserver export-policy check-access -vserver nas3 -volume
<volume name> Volume Name
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip
<IP Address> Client Address
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26
Error: show failed: "authentication-method" is a required field
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26 -authentication-method
none krb5 krb5i ntlm sys
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26 -authentication-method
none krb5 krb5i ntlm sys
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26 -authentication-method sys -protocol
nfs3 nfs4 cifs flexcache
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26 -authentication-method sys -protocol cifs
Error: show failed: "access-type" is a required field
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26 -authentication-method sys -protocol cifs -access-type
read
read read-write
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26 -authentication-method sys -protocol cifs -access-type
read-write
Error: show failed: invalid operation
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26 -authentication-method sys -protocol cifs -access-type
read-write -
-instance -qtree -path
-policy -policy-owner -policy-owner-type
-rule-index -access -partial-rule-match
-fields
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26 -authentication-method sys -protocol
nfs3 nfs4 cifs flexcache
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26 -authentication-method sys -protocol cifs -access-type
read
read read-write
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26 -authentication-method sys -protocol cifs -access-type
read
read read-write
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26 -authentication-method sys -protocol cifs -access-type
read
Error: show failed: invalid operation
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-ip 192.168.138.26 -authentication-method ntlm -protocol cifs -access-typ
e read
Error: show failed: invalid operation
cluster01::>
cluster01::>
cluster01::> vserver export-policy check-access -vserver nas3 -volume nas3_root
-client-i
cluster01::>
cluster01::>
cluster01::>
cluster01::>
cluster01::> vol create -vserver nas
nas1 nas2 nas3
cluster01::> vol create -vserver nas3 -volume
<volume name> Volume Name
cluster01::> vol create -vserver nas3 -volume cifsvol -aggregate
aggr0 aggr0_cluster01_02_0 cluster01_01_dataaggr1
dataaggr1
cluster01::> vol create -vserver nas3 -volume cifsvol -aggregate dataaggr1 -size
100m -state online -type RW -policy default -unix-permissions ---rwxr-xr-x -sna
pshot-policy default -foreground true -
-user -group
-security-style -junction-path
-comment -max-autosize
-autosize-increment -autosize-increment-percent
-min-autosize -autosize-grow-threshold-percent
-autosize-shrink-threshold-percent -autosize-mode
-autosize -space-guarantee
-percent-snapshot-space -language
-nvfail -enable-snapdiff
-qos-policy-group -caching-policy
cluster01::> vol create -vserver nas3 -volume cifsvol -aggregate dataaggr1 -size
100m -state online -type RW -policy default -unix-permissions ---rwxr-xr-x -sna
pshot-policy default -foreground true -
-user -group
-security-style -junction-path
-comment -max-autosize
-autosize-increment -autosize-increment-percent
-min-autosize -autosize-grow-threshold-percent
-autosize-shrink-threshold-percent -autosize-mode
-autosize -space-guarantee
-percent-snapshot-space -language
-nvfail -enable-snapdiff
-qos-policy-group -caching-policy
cluster01::> vol create -vserver nas3 -volume cifsvol -aggregate dataaggr1 -size
100m -state online -type RW -sa

Error: invalid argument "-sa"

cluster01::> vol create -vserver nas3 -volume cifsvol -aggregate dataaggr1 -size
100m -state online -type RW -space-guarantee none
[Job 80] Job succeeded: Successful
cluster01::>
cluster01::>
cluster01::> vserver
active-directory add-aggregates add-protocols audit
check cifs context create
dashboard data-policy delete export-policy
fcp fpolicy group-mapping iscsi
locks modify name-mapping nfs
peer remove-aggregates remove-protocols rename
san security services show
 show-protocols smtape start stop
vscan
cluster01::> vserver cifs sh
share show
cluster01::> vserver cifs share create -share-name
<Share> Share
cluster01::> vserver cifs share create -share-name test -path
<text (size 1..256)> Path
cluster01::> vol create -vserver nas3 -volume cifsvol -aggregate dataaggr1 -size
100m -state online -type RW -space-guarantee none -junction-path
<junction path> Junction Path
cluster01::> vol create -vserver nas3 -volume cifsvol -aggregate dataaggr1 -size
100m -state online -type RW -space-guarantee none -junction-path /cifsvol
Error: command failed: Duplicate volume name cifsvol.
cluster01::> vol create -vserver nas3 -volume cifsvol1 -aggregate dataaggr1 -siz
e 100m -state online -type RW -space-guarantee none -junction-path /cifsvol1
[Job 81] Job succeeded: Successful
cluster01::>
cluster01::>
cluster01::>
cluster01::> vserver
active-directory add-aggregates add-protocols audit
check cifs context create
dashboard data-policy delete export-policy
fcp fpolicy group-mapping iscsi
locks modify name-mapping nfs
peer remove-aggregates remove-protocols rename
san security services show
show-protocols smtape start stop
vscan
cluster01::> vserver cifs create -vserver nas
nas1 nas2
cluster01::> vserver cifs sh
share show
cluster01::> vserver cifs share
access-control create delete modify properties
show
cluster01::> vserver cifs share create -share-name
<Share> Share
cluster01::> vserver cifs share create -share-name test -path
<text (size 1..256)> Path
cluster01::> vserver cifs share create -share-name test -path /cifsvol1 -share-p
roperties oplocks,browsable,changenotify
cluster01::>
cluster01::>
cluster01::> vserver cifs share show
Vserver Share Path Properties Comment ACL
-------------- ------------- ----------------- ---------- -------- -----------
nas3 admin$ / browsable - -
nas3 c$ / oplocks - BUILTIN\Admin
istrators / Full Control
browsable
changenotify
nas3 ipc$ / browsable - -
nas3 test /cifsvol1 oplocks - Everyone / Fu
ll Control
browsable
changenotify
4 entries were displayed.
cluster01::>
cluster01::>
cluster01::> vserver cifs se
security session
cluster01::> vserver cifs session
close file show
cluster01::> vserver cifs session show
This table is currently empty.
cluster01::> vserver
active-directory add-aggregates add-protocols audit
check cifs context create
dashboard data-policy delete export-policy
fcp fpolicy group-mapping iscsi
locks modify name-mapping nfs
peer remove-aggregates remove-protocols rename
san security services show
show-protocols smtape start stop
vscan
cluster01::> vserver s
san security services show show-protocols
smtape start stop
cluster01::> vserver show
show show-protocols
cluster01::> vserver show-protocols -vserver
cluster01 cluster01-01 cluster01-02 nas1 nas2
nas3
cluster01::> vserver show-protocols -vserver nas3
Vserver: nas3
Protocols: nfs, cifs, fcp, iscsi, ndmp
cluster01::> net int show
(network interface show)
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
Cluster
cluster01-01_clus1
up/up 169.254.39.156/16 cluster01-01 e0a true
cluster01-01_clus2
up/up 169.254.93.22/16 cluster01-01 e0b true
cluster01-02_clus1
up/up 169.254.218.246/16 cluster01-02 e0a true
cluster01-02_clus2
up/up 169.254.20.60/16 cluster01-02 e0b true
cluster01
cluster01-01_mgmt1
up/up 192.168.138.151/24 cluster01-01 e0d true
cluster01-02_mgmt1
up/up 192.168.138.152/24 cluster01-02 e0c true
cluster_mgmt up/up 192.168.138.150/24 cluster01-01 e0d false
nas1
lif1 up/up 192.168.138.153/24 cluster01-01 e0d true
nas2
lif2 up/up 192.168.138.154/24 cluster01-01 e0d true
nas3
lif3 up/up 192.168.138.155/24 cluster01-01 e0c true
10 entries were displayed.
cluster01::>
cluster01::>
cluster01::>
cluster01::> vserver se
security services
cluster01::> vserver services dns create -vserver
cluster01 nas1 nas2
cluster01::> vserver services dns create -vserver nas
nas1 nas2
cluster01::> vserver cifs create -vserver nas
nas1 nas2
cluster01::>