Company Profiles

COMPANY PROFILES
SUBMITTED BY:
Maridan Industries Incorporated was first established as Maridan Chemical Industries, a single
proprietorship company registered with the Department of Trade and Industry (DTI) on July 5,
1991, and with the Food and Drug Administration (FDA) under license number RDII-RVI-DM-
021. Founded by Maridan Nava-Sollesta, the company specialized primarily in manufacturing
galenicals or medicines for external use made from the active components of plants and
chemicals. Among its first products were white rose rubbing alcohol, aceite de manzanilla, aceite
de alcamporado, oil of wintergreen, and solutions of povidone iodine, salicylic acid and
hydrogen peroxide.
Now a family-owned corporation, Maridan Industries Incorporated is being managed by Eusebio

V. Sollesta and Maridan Nava-Sollesta together with their sons, Marketing Manager Lester,
Production Manager Jan, and Eldred. A premier drug manufacturer in Western Visayas, the
company has launched a broad array of galenical products, drugs, cosmetics and chemicals in
over two decades, which are widely distributed in various channels locally.
While the company focuses on producing top products of choice, it seeks to keep abreast of the
dynamic chemical industry in diversified means. Pursuing quality while creating no adverse
impact on the environment is also one of its major thrusts. Thus, a significant portion of the
company investment yearly is on state-of-the art equipment and maintenance, proper waste
management, and sanitation that do not compromise the communities in the vicinity of its
facilities.
Likewise, investing in quality people and talent is of utmost importance. From the administration
to the manufacturing department to marketing, the company has a robust roster of competent and
driven personnel who seek to deliver on corporate goals.
Through the years, Maridan Industries Incorporated has remained steadfast in delivering
exceptional products and services as it earned invaluable support from loyal customers while
continuously building strong business relationships among its stakeholders, partners, and
suppliers. To date, Maridan Industries Incorporated has launched its new line of antiseptic brand,
Hyclens.
Process flow
Board of Directors
President: BERNADETTE Q. DELA ROSA

Vice President-Internal: MONA LITA S. MARACHA
Vice President-External: MA. LOURDES S. GARGANERA
Secretary: EMELINE S. BAUTISTA
Asst. Secretary: MINERVA C. BERMOY
Treasurer: CAROLINA dL. Tobias
Asst. Treasurer: ROSE ANNE P. EVANGELISTA
Auditor: MA. CARMELA A. BARREDO
P.R.O.: PAUL BERNARD G. IBE
Directors: JINGLE G. DIOLA and TEODORO M. DIZON III
Immediate Past President: MARITA P. SISCAR
Secretariat: CHARITY T. BOX
Holcim Philippines
Holcim Philippines, Inc. (Philippine Stock Exchange: HLCM) is one of the leading construction
solution companies in the country. The Company has a wide range of innovative construction
solutions that can help home owners to large contractors in their building needs.
With cement manufacturing facilities in La Union, Bulacan, Misamis Oriental and Davao,
mobile concrete ready-mix facilities and aggregates business backed by a strong nationwide
network of dealers, Holcim Philippines is a reliable partner of builders in the country. Holcim
Philippines is also committed to highest standards of sustainable operations and manufacturing
excellence with its plants certified under ISO 14001:2004 (Environmental Management System),
ISO 9001:2008 (Quality Management System) and OHSAS 18001:2007 (Occupational Health
and Safety Management System).
Holcim Philippines is a member of the LafargeHolcim Group, the world leader in the building
materials industry with presence in 90 countries and with over 100,000 employees.
Process Flow
Part 1 - raw materials extraction
1. Quarry
Extraction of limestone, marl and clays using drilling and blasting techniques
Other materials that contain the required proportions of calcium, silicon, aluminium and
iron oxides are extracted as well
2. Crusher
The quarried material is then reduced in size by compression and/or impact in various
mechanical crushers
Crushed rock is reduced in size from 120 cm to between 1.2 and 8 cm.
Drying of raw material may also be necessary for efficient crushing and pre-blending
3. Conveyor
Raw material is then transported from the quarry
using conveyors, rail wagons or other suitable logistics solutions specific to the cement
plant
Part 2 - blending and clinkerization
4. Mixing bed
The crushed limestone and clay is homogenized by stacking and reclaiming in a long
layered stockpile
This material is then ready for milling and drying in the kiln
5. Raw mill
The raw materials are milled and dried in a roller mill
Heavy rollers are held over a rotating table and the material is milled until it is fine
enough to be carried by air to a homogenizing silo.
6. Filter bag
Filters comprise filters of either woven fabric or needle felts to remove particles from kiln
exhaust
The exhaust gas from many kilns is used for drying raw materials
improving the energy efficiency of the plant.
7. Preheater
Cyclone preheaters enable the raw material of cement production to be preheated before
entry into the kiln.
This increases the energy efficiency of the kiln as the material is 20-40% calcined at the
point of entry into the kiln.
8. Kiln
The kiln is designed to maximize the efficiency of heat transfer from fuel burning to the
raw material
In the preheater tower the raw materials are heated rapidly to a temperature of about
1000C, where the limestone forms burnt lime.
In the rotating kiln, the temperature reaches up to 2000C.
At this high temperature, minerals fuse together to form predominantly calcium silicate
crystals - cement clinker.
9. Cooler
The molten cement clinker is then cooled as rapidly as possible
The ambient air used to cool the clinker is then fed into the kiln as combustion air
ensuring high utilization of the heat produced

Part 3 - grinding and distribution
10. Clinker silo
Clinker may be either stored on site in preparation for grinding to form cement
or transported to other sites
11. Cement mill
Finish milling is the grinding together of cement clinker, with around 5% of natural or
synthetic gypsum
Other cementitious materials such as slag, flyash or other pozzolans may also be
incorporated into the final cement powder
12. Logistics
Final cement may be transported pre-bagged or as a bulk powder.
The method of transport selected varies according to location
and may include transport via truck, rail or ship

Board of Directors
Presently covering Western Visayas, we are recognized to be one of the most reliable total
advertising solutions provider in the cities of Bacolod and Iloilo. With our overriding passion
that is outdoor advertising, we constantly introduce unlimited choices and innovation where on-
time delivery of unparalleled graphic designs and printing quality is guaranteed. Our fascination
with technology is evident in our latest equipment and the constant innovation of our
machineries. We strive to aim that each and every project is as memorable as possible by
providing effective and strong visual communication that ensure to reach the target market of our
partners. Our Commitment From DESIGN to DELIVERY, we STRIVE to give you the FINEST
SERVICE that you deserve.
Process Flow
BOARD OF DIRECTORS
Alfredo Panlilio
Independent Director
Pedro Roxas
Independent Director
Joaquin Miguel Estrada Suarez
Chairman of the Board of Directors
Pedro Jose Palomino
President and Chief Executive Officer
Paul Vincent Arcenas
Vice President for Communications, Marketing and Investor Relations
Vincent Paul Piedad
Treasurer and Business Services Organization & Procurement Director
Jannet
te Virata Sevilla
Corporate Secretary and Compliance Officer

Company Profiles

Uploaded by

Copyright:

Available Formats

Company Profiles

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Company Profiles

Uploaded by

Copyright:

Available Formats

COMPANY PROFILES

Now a family-owned corporation, Maridan Industries Incorporated is being managed by Eusebio

President: BERNADETTE Q. DELA ROSA

Part 1 - raw materials extraction

Part 2 - blending and clinkerization

The raw materials are milled and dried in a roller mill

improving the energy efficiency of the plant.

In the rotating kiln, the temperature reaches up to 2000C.

The molten cement clinker is then cooled as rapidly as possible

ensuring high utilization of the heat produced

10. Clinker silo

or transported to other sites

11. Cement mill

Final cement may be transported pre-bagged or as a bulk powder.

The method of transport selected varies according to location

and may include transport via truck, rail or ship

You might also like