Scribd
Upload
199 views2 pages

Lifting Plan Sketch - Example

This document provides a lifting plan sketch and details for a project. It summarizes the key lifting equipment needed, including an 80 tonne Liebherr crane with 1.74x1.74m outrigger mats applying up to 11.3 tonnes of pressure per square meter. It also notes the permissible bearing capacity of the hardstand area is 22 tonnes per square meter. The client must confirm the adequacy of the hardstanding prior to lifting.

Uploaded by

TON
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
199 views2 pages

Lifting Plan Sketch - Example

This document provides a lifting plan sketch and details for a project. It summarizes the key lifting equipment needed, including an 80 tonne Liebherr crane with 1.74x1.74m outrigger mats applying up to 11.3 tonnes of pressure per square meter. It also notes the permissible bearing capacity of the hardstand area is 22 tonnes per square meter. The client must confirm the adequacy of the hardstanding prior to lifting.

Uploaded by

TON
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Insert company logo here

Lifting Plan Sketch Example 2011


Date Site Visited : ********** Project Ref : ********** Approx. Scale: N.T.S. Insert company address

Client : ********************** / contact details here

Site Address : **********************

Lift Plan Prepared By (Appointed Person) :


Clients Site Representative : **********************
Print Name:
*****************************
This Lifting Plan has been prepared within guidelines drafted by the Precast Flooring Federation. www.precastfloors.info
It must be read in conjunction with the attached Lifting Schedule / Method Statement and all associated documentation Signature:
*****************************

X
Denotes Delivery
Crane Stand Ref / Installation Sequence
Deploy air mat fall A
protection around
delivery vehicle

Slew
Direction

4 No. 1.74 x 1.74m


Outrigger Mats
Max. 11.3 Tonnes / m2
pressure beneath mats

4
2

Crane required to undertake the Lift: 80 Tonne AT Liebherr LTM 1080/1 . Is Larger alternative crane permitted: No
Outrigger loadings are based on the worst case tonnes / m2 outrigger loading including the alternative: as above
The crane company must not provide a larger crane without prior agreement. If a crane larger than this is provided, do not rig up and refer to AP for guidance.
Crane Outrigger Jack Load: 35 Tonnes (LICCON) Permissible Bearing Capacity of Hardstand = 22.0 Tonnes / M
Crane Mat Size: 1740 x 1740mm = 3.02 M Pressure Applied Beneath Mats = 11.3 Tonnes / M
Client hardstand location / preparation / maintenance confirmation:
1. The permissible bearing capacity above has been provided by a competent person who assessed the adequacy of the crane hardstanding area.
2. On the day of installation (prior to commencing lifting), the Client should confirm the adequacy of the hardstanding, beneath each rig position (taking
account of deterioration since the initial assessment).
For And On Behalf Of The Client: Print Name: ***************************** Signature: *****************************

You might also like