The complete guide to

Low Voltage switchgear

WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK
The complete guide to low voltage switchgear

Contents

4-7 Merlin Gerin LV Switchgear

An introduction to the Merlin Gerin low voltage range of switchgear, and
key solutions to providing customers with cost effective distribution.

8-9 SAIF - Switched and Insulated Fusegear

The worlds safest feeder pillar range providing independent manual, fault
make, load break switching.

10-11 SAIF - Heavy duty cut-out

Safety with flexibility over traditional cut-out solutions fully interlocked
with switching capability and IPXXB operator protection.

12-13 Shielded Fusegear

Increased safety, reliability and flexibility from a range including fuse
cabinets, fuse boards and feeder pillars.

14-15 Shielded - Heavy duty cut-out

Giving the operator protection to IPXXB by using proven shielded
fusegear technology.

16-17 NS - Low voltage outdoor switchboard

Incorporating technically advanced moulded case and air circuit breakers
up to 3200A. Transparent ready solution with options for remote
monitoring and operation.

18-21 Opus range - Operator Protection Upgradeable Safety

LV incoming disconnectors, switch disconnectors, outgoing fuse rails
and fuse switch disconnectors.

22-23 Service intake units, enclosures and mini pillars

Consisting of a range of indoor service intake units with ratings
up to 3200A. Outdoor empty enclosures and sub distribution circuit
up to 100A.

24-25 MODE - Multiple Occupancy Distribution Equipment

A range that provides indoor wall mounted low voltage distribution
up to 500A.

26-27 Package substations

The complete solution, tailored to customers requirements using
products from the comprehensive Merlin Gerin range.

3
 Introduction

A complete range of LV switchgear from

the transformer to the metering point.

Whatever your requirement for LV distribution, we have

the solution from fuse protection to the latest circuit
breaker technology. The assembly can be custom built
to meet your needs and delivered direct to site whilst
maintaining short product lead times from the moment
you place the order.

When indoor space is at a premium, the answer is often outdoors.

Merlin Gerin LV switchgear can be installed outdoors or indoors, in a
public or private network to protect and distribute electricity to housing
estates, shopping centres, colleges, ports, airports, MoD Estates,
telecommunication sites, factories and many other commercial and
industrial installations.

One of the great advantages of the Merlin Gerin outdoor distribution

range, apart from the fact that they cost much less than a purpose built
brick or fibreglass substation and indoor switchboard, is their much
smaller size. Outdoor low voltage switchgear can often be sited closer to
the load, cutting installation and running costs.

In addition, when it comes to safety, Merlin Gerin feeder pillars are second
to none. Safety as a minimum is to IPXXB standards, this means that
even an operator is protected from potentially live conductors during
normal service conditions.

WWW.CABLEJOINTS.CO.UK
For further information on any of the products detailed in this brochure
please contact: THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
[email protected]
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK

4 The complete guide to low voltage switchgear

Used individually or as an integrated part of an MV/LV package
substation, low voltage switchgear is the distribution solution that
provides the lowest total cost of ownership for many sites.

5
 Introduction

Safe, flexible and much more.

Easy and safe to use
Merlin Gerin LV switchgear assemblies are designed with inherent safety,
which means they can be operated by less skilled personnel and
ultimately reduce expensive training costs.

Saving valuable indoor floor space

On many sites, such as retail outlets and hospitals, indoor floor space is
at a premium and its loss to an indoor switchroom is unacceptable.
Outdoor LV switchgear simply side steps this issue.

Reduces cabling
Requiring no external housing, outdoor feeder pillars are compact in
footprint size and can be installed closer to the point of demand. This
reduces substantially the length of cable runs and sizes required, which
is often a dominant cost during installation. The associated level of
expensive circuit protection can also be lower. As an added benefit for
the end user, operational costs are cut because shorter cables mean
lower losses.

High availability for low ownership costs

Monitoring and control systems are easily integrated with Merlin Gerin
LV switchgear. The ability to monitor and control low voltage systems
remotely can greatly boost utilisation of the assembly by enabling the
network to be reconfigured to minimise costly supply failures. Remote
monitoring is also a tremendous aid to energy management schemes.

Meets future requirements

Merlin Gerin LV switchgear is designed with future needs in mind.
Assemblies can be specified with capacity to spare. New circuits can be
readily added at any time to allow the installation to expand as demand
grows. Monitoring and control options can also be easily retrofitted, which
all means you make the best use of your available capital, while
protecting your investment for many years to come.

Long life, low maintenance

Merlin Gerin LV switchgear for outdoor use is manufactured from 3mm
hot-dip galvanised steel, processed with a primary coat of zinc rich epoxy
powder paint and finished with a final coat of polyester powder paint that
is cured to produce a hard wearing gloss finish.

All of which makes the robust enclosure, vandal proof and weatherproof
for reliable operation in all environmental conditions.

6 The complete guide to low voltage switchgear

7
 SAIF - Switched And Insulated Fusegear

Indoor/outdoor LV distribution up to 3200A

Merlin Gerins Switched And Insulated Fusegear (SAIF)

is the worlds safest feeder pillar range. Fully type-
tested it provides IPXXB operator protection in all
operating conditions, even when fuse links are being
replaced with the pillar remaining live.

Fault make and load break switching can be safely performed by less
experienced operators, thanks to its ASTA-certified switching. The
switching utilises the fully transferable independent manual switching
mechanism, which, to ensure safety, is the only way that the fuse carrier
can be switched on or off. A fully interlocked design ensures correct
operation and switching does not depend on the skill of the operator, or
the speed with which the handle is turned.

SAIF is factory assembled in a choice of outdoor feeder pillar, fuse

cabinet or indoor fuseboard providing safe solutions for LV distribution,
with the added benefit of minimum maintenance.

SAIFs unique qualities have proved successful in markets around the

world, being extensively used by utilities, commercial and industrial
customers.

8 The complete guide to low voltage switchgear

Features and benefits
Assured fault make, load break switching capability independent
of the skill or speed of the operator
Fuse switch performance to AC22B of IEC 60947-3
Fully interlocked fuseway with switching mechanism ensures
safe operation
Operator protection to IPXXB of IEC 60529 even with the fuse
carriers removed from the outgoing fuseway
Cable terminations at the base of fuseway accept cables up to
1 x 4C300mm2 per circuit up to 630A
Simple Plug-on fuseway design allows for easy addition of new
circuits whilst reducing initial capital cost of the assembly
Test probe access through front of fuse carrier
Accepts type gU fuse links with wedge tightening contacts 82mm
or 92mm centres
Three ratings of outgoing fuseway from 400A, 630A and 800A

9
 SAIF - Heavy duty cut-out range

Indoor LV protection and isolation up to 630A

The innovative range of SAIF cut-outs provide circuit

protection and a certified switching capability with
inherent safety features normally associated with fuse
switches whilst retaining the complete flexibility of a
traditional cut out.

The high level of enclosure protection to IP41 permits flexibility in site

location, including areas accessible to the general public. The SAIF range
of cut outs provides IPXXB operator protection, preventing accidental
contact with live conductors during switching and fuse link replacement
with the cut out still live.

Individual fully insulated phase and neutral modules in a horizontal TP&N

arrangement which, should a fault occur, prevent failure across adjacent
units. Assembled together on two individual plattens, the complete unit
can be easily installed through four external bolt fixings that also allow
for the simple installation of the fully insulated cable box.

10 The complete guide to low voltage switchgear

A portable independent manual switching mechanism provides a
proven fault making, load breaking switching capability, independent
of the operators skill and dexterity. The cut out, fuse carriers and
switching mechanism are interlocked ensuring correct operation even by
inexperienced operators.

The fully insulated design eliminates the need for direct earthing of the
cut out enclosure therefore facilitating flexibility in system earthing.
Flexible cabling arrangements allow for ring or radial systems, single or
multi-core cables, aluminium or copper conductors.

Features and benefits

Fully insulated design removes need for direct earthing
Full segregation between phases and neutrals
IP41 allows for flexibility of installation location
IPXXB operator protection from live conductors - even when
changing fuselinks
Fully interlocked design for correct operation
Independent manual switching mechanism - certified fault make,
load break switching

11
 Shielded fusegear

Indoor/outdoor LV distribution up to 3200A

The Shielded range from Merlin Gerin, comprises of

fuse cabinets, fuseboards and feeder pillars and goes
one step further than traditional exposed live
copperwork by screening all live conductors during
normal service conditions. Thus Shielded fusegear
ensures safety for all entering a substation from
accidental contact with live parts and greatly reducing
the risk of an electric shock.

The fuseway design fully segregates the main busbars and each outgoing
circuit. Individual moulded phase shrouds provide easy access to cable
terminations whilst ensuring protection from the adjacent live circuits.

Ease of operation, Shielded fusegear holds the solution

Fuse carriers accept gU type fuselinks with wedge tightening contact
whilst the patented through-grip handle ensures easy manual making and
breaking of contacts. The fuse carrier design also requires no tools to
change the fuse link and the ergonomic design of the thumbscrew
lozenge ensures tight fuse link contacts in order to prevent overheating
and potential interruptions of the supply.

12 The complete guide to low voltage switchgear

The shielded fuseway contacts and removable shrouds allow easy hinge
in and snatch out manual switching actions. Solid plastic busbar
contact shrouds are provided to maintain operator protection to IPXXB
once the fuse handle has been removed.

Outgoing cables up to 300mm2 terminate directly to the fixed fuse link

contacts with a four position terminal arrangement eliminates phase cable
core cross-overs.

Features and benefits

Fuseway ratings of 400A, 630 and 800A
Fuse carrier accepts type gU fuselinks with wedge tightening contacts
82mm or 92mm centres
Operator protection to IPXXB in normal service conditions
Through grip fuse handle for ease of manual switching
Fuse carrier requires no tools to change a fuselink
Fully segregated busbars and circuits with removable solid phase
shrouds
Test probe access to busbar and outgoing circuit whilst maintaining
IPXXB
Segregated circuits allows for safe cabling with adjacent fuseway live*
Four position terminals ensure no phase core cross-overs
Freestanding or TX mounted solutions

*All work on equipment that may be live must be carried out in complete compliance with the
electricity at work regulations and all safety procedures must be observed.
13
 Shielded heavy duty cut-out

Indoor LV protection and isolation up to 630A

The Merlin Gerin Shielded heavy duty cut-out goes one

step further than traditional cut-outs. It gives operator
protection to IPXXB by using proven Shielded fusegear
technology.

Shielded heavy duty cut-out provides operator protection to IPXXB from

live conductors as the cut-out incorporates segregated, flame retardant
phase termination mouldings and a through grip fuse handle on each
fuse carrier.

Phase termination modules are individually segregated making it easy to

remove and have access to either the top and bottom cable terminations.

It is possible to make a circuit live in seconds, as the Shielded fuse

carriers dispense with the need for tools to change the fuselink. The unit
can easily be fitted in areas used by the general public as it conforms to
IP4X.

Especially designed for commercial and industrial building applications,

customers individual requirements can be accommodated by the use of
additional accessories.

14 The complete guide to low voltage switchgear

Features and benefits
Available in 400A and 600A ratings
Conforms to ENA-TS 37-2, IEC 60947-3, IEC 60439-1, IEC 60529
standards
IPXXB operator protection during normal operation and IP4X
in normal service
8 segmented phase termination modules on a common one-piece
insulated base moulding
Through grip shielded fuse handles on all fuse carriers
Easy access to both top and bottom cable termination
Compact, modular design
Wide range of termination solutions

15
 NS Feeder Pillar

Outdoor switchboard solution

with ratings up to 3200A

The NS range of outdoor switchboards incorporates

technically advanced moulded case and air circuit
breakers up to 3200A, with the option for remote
monitoring and operation.

Weatherproof for outdoor installation, the NS feeder pillar can be either

transformer mounted to form part of a compact substation, or free
standing. Maximum flexibility is achieved by its stacked busbar system up
to 3200A and range of Compact NS moulded case and Masterpact NW
air circuit breakers.

For maximum flexibility up to 630A the NS breaker utilises a plug-on

cassette factory fitted to the top of the MCCB. The cassette allows the
NS breaker to be positioned anywhere on the busbar system whilst
ensuring the correct torque for the connection is achieved.

The outdoor switchboard solution comes fully assembled to customer

specification for easy installation reducing costly site time, with bottom
entry cable connection via individual gland plates. The cable space is
protected by an earthed metal screen, whilst each breakers cable
terminations are protected with cable shrouds for maximum safety.

16 The complete guide to low voltage switchgear

Transparent Ready solutions
Never let your remote outdoor LV switchboard be more than a mouse
click away for remote monitoring and operation for efficient energy
management. The NS feeder pillar is transparent ready allowing it to be
integrated into a building management system through existing LAN
network infrastructure on large sites and then monitored centrally from a
WAN or over the internet, or alternatively as a stand alone web-enabled
solution. Either way real cuts in energy usage can be achieved through
analysis and visibility of information about the different forms of energy
used by plants and buildings.

Features and benefits

Operator protection to IPXXB of IEC 60529
Purpose built, weatherproof enclosure
Four pole or Three pole and neutral busbar system up to 3200A
Cable or flange connection to transformer
Merlin Gerin range of Compact NS and Masterpact NW moulded case
or air circuit breakers
Transparent ready solution optional remote control and monitoring
Free standing or package substation options available

17
 Opus - Operator Protection Upgradeable Safety

Fuse rails and fuse switch disconnectors

Opus Intra, Opus Plus and Opus Excel have been

developed by Merlin Gerin to offer you protection utilising
blade type fuselinks to IEC 60269-2-1 and a choice of
increased operator safety to suit your application.

Feeder pillar
Transformer mounted or
freestanding. The outdoor
weatherproof enclosure can
be equipped with up to 14
Opus range outgoing
circuits.

Opus Intra standard safety

Fuse rail or fuse base
Opus Intra fuseway base is moulded from durable, flame
retardant material
Cable distribution cabinet
A robust base for fuse contacts and solid outgoing tin
Reduced dimensions from
plated copper connections that of the feeder pillar
makes the cable or
Additional shrouding of the Opus Intra fuseway base distribution cabinet a
compact, flexible solution
provides IPXXB operator protection from live conductors for local street supplies.
when the fuselinks are not in service, or with insulated
blade type fuselink tags
Available in ratings of 400A and 630A, Opus Intra accepts
manually inserted size 2 and 3 fuselinks respectively
Manual insertion of fuse links is achieved with a hand held
fuse puller
Opus Intra fuseway provides a cost effective, simple
installation with minimal maintenance

Fuseboards
Fully shrouded to provide
IPXXB operator protection
from live conductors, a
fuseboard can be either
transformer, wall
or floor mounted, even part
of a MV/LV substation or
kiosk interior.

18 The complete guide to low voltage switchgear

Opus Plus increased safety
Manual fuse switch disconnector
Increased levels of operator protection are achieved with Opus Plus
Maximum flexibility in providing 12 possible distribution solutions
Fully shrouded fuselinks in fuse carriers
Manual switching is achieved via levers to move the fuse carriers to either
the on or off positions
A parallel switching action contacts with arc control, ensures a swift
opening and closing of the circuit
Operator protection from live conductors in the on, off or transitional
positions
Opus Plus is available in ratings of 400A and 630A as either a single pole
or triple pole switching operation
Solid outgoing tin plated copper connections accommodate a cable lug
or mechanical connector termination up to 300mm2
Facility for top or bottom cable entry, or alternatively to the left hand or
right hand side

Opus Excel optimum safety

Independent manual fuse switch disconnector
Operator protection from live conductors to IPXXB during all
operating conditions
Mechanical spring assisted switching mechanism enables safety of the
highest levels to be achieved. Switching mechanism engages with each
fuse carrier in turn to produce an AC22B fault make, load break fuse switch
Fully interlocked to ensure correct operation and does not rely on the
skill of the operator, or the speed at which the lever is moved
The mechanism is the only means of driving the fuse carrier
to the on or off positions
Facility to remotely monitor the on and off status of the
outgoing circuits
Opus Excel is available in ratings of 400A and 630A with
solid outgoing tin plated copper connections
Can accommodate a cable lug or mechanical connector
termination up to 300mm2
Facility for top or bottom cable entry, or alternatively
options to the left hand or right hand side

19
 Opus - Operator Protection Upgradeable Safety

LV incoming disconnectors, switch disconnectors

The Merlin Gerin range of disconnectors provide operator

protection to IPXXB in all operating conditions.
Assembled from single units as either a TP or TP&N
horizontal or vertical arrangement the compact and flexible
design has enhanced ratings and can accommodate an
integral CT for transformer load monitoring.

Incoming disconnector
Off-load disconnector used to provide a
visible point of isolation from the incoming
transformer supply.
Operator protection from live conductors to
IPXXB in closed, open and transitional
positions.
Special insulated tool to operate the
Current transformers
disconnector.
The disconnector and
Disconnector and insulated handle fully switch disconnectors
accommodate an optional
interlocked to ensure that the disconnector integral CT for incoming
cannot be left in a transient position. load monitoring. The current
transformers are
Optional integral current transformers for encapsulated in epoxy resin
within moulded cases and
monitoring transformer load. comply with IEC 60185.
Vertical and horizontal configurations Test certificates indicating
ratio error and phase angle
available as either three pole or three pole are available upon request
for classes 1.0 and 0.5.
and neutral assemblies
Neutral link is rated at 50% that of the
phase rating as standard, full size
neutrals available upon request.

20 The complete guide to low voltage switchgear

Incoming switch disconnector
On load switch that can be used in conjunction
with generator backup for a no break
changeover to generator and vice-versa.
Certified manually dependent switching capability.
Operator protection from live conductors to
IPXXB in on, off and transitional positions
Special insulated tool to operate the switch
disconnector.
Switch disconnector and insulated handle fully
interlocked to ensure that the switch disconnector
cannot be left in a transient position.
Optional integral current transformers for
monitoring transformer load.
Vertical and horizontal configurations available as
either three pole or three pole and neutral
assemblies.
Neutral link is rated at 50% that of the phase
rating as standard, full size neutrals available
upon request.

21
 Other Merlin Gerin public distribution products

Service termination cubicles, service pillars and

outdoor enclosures

Outdoor Mini service pillar

A compact fuse service pillar mounted on it's own cable root, provides
easy access to outgoing fuse cut outs mounted to a staggered busbar
system, providing operator protection to IPXXB during normal service
conditions. These outdoor IP33 mini service pillars are freestanding and
bottom entry cable connected with a padlockable door handle. The
outgoing circuits provide up to 6 x three phase supplies or 18 x single
pole supplies with house service cut outs to BS 1361 providing flexible
fuse ratings from 5A up to 80A and 100A.

Note fuselinks not included

Outdoor enclosures

The padlockable enclosure with IP33 protection to the internal equipment

is offered as standard or IP54 as an option. Available in six sizes from
710mm to 2110mm each is fitted with a 12mm plywood backboard to
allow for easy installation of discrete components.

Manufactured in 3mm hot dipped galvanised steel a primary coat of zinc

rich epoxy powder paint is applied and oven cured followed by a final top
coat of polyester powder paint that is also oven cured. These three layers
of corrosion protection and the strong steel assembly ensure that the
enclosure will provide many years of reliable service.

Standard colour finish is dark grey to BS 381C although other colours are
available as an option.

22 The complete guide to low voltage switchgear

Service termination cubicle range
Utilising the latest range of Masterpact air or Compact NS moulded circuit
breakers the indoor service termination cubicles provides a point of
metering, isolation and protection to customers requiring large supplies
up to 3200A.

The cubicles floor mounted and for indoor use only with the optional kit
for a fault free busbar connection to the Merlin Gerin Prisma range of
indoor switchboard. The circuit breaker use the micrologic control units
common across all ratings above 800A for protection and also includes a
local external trip button and padlock facilities to prevent the breaker from
being reset and switched 'On'.

The arrangement provides separate door access to the incoming section

and CT metering section. The incoming section provides a gland plate
and support for up to 7 x 740mm2 incoming cables. Provision is included
in the upper section for the installation of 3 metering CT's on removable
links. The current transformers can be factory fitted from our wide range
of CT's to BS 3938 / 7626 for metering applications or fitted by others.
The potential fuses and optional test terminal block are accessible from
the front without exposing the operator to live conductors.

Direct connection
to Prisma Plus

23
 MODE - Multiple Occupancy Distribution Equipment

MODE is a range of electrical equipment

that provides indoor, wall mounted, low
voltage distribution up to 500A.

200A/3 way MODE box

The MODE (Multiple Occupancy Distribution

Equipment) range provides a point of distribution,
with or without fused incoming isolation, to tariff
meters serving multiple occupancy residences,
commercial buildings and offices.

Bespoke panel builders have traditionally served the distribution market, 300 amp 6 way MODE box

but with deregulation opening broader market opportunities, Schneider

Electric has recognised the need to provide easily specified, reliable and
cost effective packaged solutions. MODE is an elegant example of this
approach for Distribution Network Operators (DNOs), since its design
makes use of proven and widely used Merlin Gerin products which are
available in 13 variants as standard.

24 The complete guide to low voltage switchgear

 500A dual fused 10 way MODE box

Safety has been considered a high priority in the MODE design and
operators are protected to IPXXB with the door open.

Reliability has been assured through both the one-piece combination

busbar design of the MODE units and rigorous temperature rise testing.
Staggered outgoing phase banks increase cabling access and make
multiple cable termination easy though an optional range of outgoing pre-
drilled gland plates, which include either conical plastic grommets or
suffing glands, installation time is significantly reduced.

The MODE range use house service cut outs to BS 7657 for ratings of up
to 100A and for larger supplies over 100A the mode range can
accommodate several shielded fuseways for the outgoing distribution
circuits. The incoming supply can be provided from an externally mounted
heavy duty cut-out for requirements up to 200A, or via an integral
Shielded fuseway for ratings up to 500A.

Just four unit types, in three ratings, provide the 13 variants covering from
200A 6-single pole 100A ways up to a 500A 60-single pole 100A ways.
The 500A version is also available as standard with a dual incoming and
outgoing shielded fuseway and up to 30-single poles 100A ways for
distribution or incoming shielded fuseway and up to 12-single pole 200A
ways and 3-single pole 100A ways for a landlord supply.

The MODE range includes accessories to accommodate different

termination arrangements. As standard all incoming cables are supported
with an adjustable cable cleat, with optional mechanical connectors to
incoming fuseway removing the need for cable lugs also optional
extension boxes for larger incoming waveform cables up to 4C 240mm2.

Compact wall mtd IPXXB operator 13 standard Wide range of

indoor design protection solutions accessories

25
 Package substations

Our comprehensive range includes:

Metalclad distribution substations

In-line package substations

Unit substations
Padmount substations
One-stop engineered package substation
Fast-Trans substations

This provides customers with a convenient single source of package substation

with minimum time and costs.

Ease of specification is guaranteed by one point of contact, from initial enquiry

through to manufacture, delivery, commissioning and aftersales service.

Package substations are delivered as one complete unit, minimising logistic

costs. Cost savings on installation are achieved by reducing the foundation area
due to direct mounting of MV and LV switchgear.

26 The complete guide to low voltage switchgear

An extensive range of equipment to fulfill your specification
Flexibility is assured through tailored configurations from the wide range
of Merlin Gerin products that include:

Transformers from 200kVA to 2500kVA

Hermetically sealed
Free breathing with or without conservator
Extensible and non extensible Ringmaster MV switchgear
LV SAIF and Shielded fusegear
LV ACB cabinets and NS feeder pillars
Automation and monitoring systems

27
 Further information

For your convenience

The complete range of Low Voltage Switchgear literature is available in pdf
format on our website, www.schneider.co.uk

These can be easily viewed or downloaded, 24 hours a day, 7 days a week.

you may access these via the products and services section available under
electrical distribution; low voltage switchgear and feeder pillars.

The website also contains further information on our extensive range of

electrical distribution, automation and control products, services and local
distributor networks.

www.schneider.co.uk

26
28 The complete guide to low voltage switchgear
Notes

29
 Notes

30
31
 WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
Schneider Electric Ltd - Merlin Gerin LV switchgear
WWW.THORNEANDDERRICK.CO.UK
Cayton Low Road Eastfield Scarborough North Yorkshire YO11 3DA UK
Tel: +44 (0)1723 502800 Fax: +44 (0)1723 502860 Email: [email protected] Web: www.schneider.co.uk
MGLV 5488 V.3 DEC 2006