ALPU-CMM3
Motorola Canopy Surge Protection TM
Todays wireless broadband technology involves sensitive electronic
equipment which you depend on for systems reliability. Your wireless
broadband radios will experience unpredictable and potentially
destructive power quality conditions. Incidents such as lightning and
transients may cause your business maintenance time and costs,
radio replacement costs and customer dissatisfaction. In addition,
protection is required by NEC (National Electric Code) and NFPA
(National Fire Protection Agency) Standards.
Your Success Requires a Superior Protection
Solution Provided by Transtector Systems, Inc.
Applications
Motorola Canopy Cluster TM
Management Module 3 (CMM3)
Motorola Canopy Cluster TM
Management Module 2 (CMM2)
Features
Patented fast response, non-degrading silicon diode
technology for increased systems dependability.
Exclusive design for Motorola Radio Products and
Service Division.
ALPU-CMM3 Protects eight CAT 5e data/powerlines - line to line,
line to ground.
Motorola CMM
Easy connections with shielded RJ-45 connections
Protection to IEC 61000-4-5
Internal 1/4 - 20 bolt for grounding
ALPU-CMM3
Configurations Installations
RRDN 4115B 1. The enclosure is designed to mount on both flat surfaces and
ALPU Series pole applications. Refer to figure 1 for the mechanical
ALPU-CMM3
dimensions. Note the bottom orientation of the enclosure is
Motorola Part Number WiNS-TRANSSURGE referenced with the grommet opening down.
Max. Continuous 2. For ease of wiring, the surge suppressor protects each wire
Operating Voltage of each of the eight channels effectively no matter which
Ethernet 12 VDC direction the cables are installed. Create a narrow slice on the
DC Power 30 VDC grommet and pull the individual data cables into the enclosure
one at a time through the bottom. Note each in-and-out
Surge Current Ratings channel pair and install across horizontal RJ45 connector pair,
i.e. Connector 1 to Connector 2.
Ethernet 25V@100A*
DC Power 50V@100A 3. When all required cables are pulled and connected secure
Response Time (Max.) <5 nanoseconds the cable sets to the cable tie rings within the enclosure as
illustrated in figure 2.
Operating Temperature -40 C to +80 C
Dimensions Refer to Diagram Below
* 10/1000 micro second waveform
TRANSTECTOR 8 CHANNEL
CANOPY SURGE SUPPRESSOR
JUNCTION BOX
P/N 1101-805
INSTALLATION INSTRUCTIONS
17.0
16.0
14.9
INPUT/OUTPUT MOUNTING HOLE
RUBBER GROMMETS (4 PL) 0.25 (4 PL)
GROUND TERMINAL
MOUNTING HOLE (ACCEPTS 2-8 AWG WIRE)
0.50 (2 PL)
Figure 1
Phone: 800.442.4210 EXT. 6883
TTY Phone: 866.522.5210
Transtector Systems, Inc.
Fax: 800.622.6210
208.772.8515 800.882.9110 FAX 208.762.6133
10701 N. Airport Road, Hayden, ID 83835 US Federal Government: 800.826.1913
Online Users: www.motorola.com/businessonline
www.transtector.com
[email protected] MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.
All other product or service names are the property of their respective owners.
WiNS-TRANSSURGE 1455-021