Innovatint Ultimate Manual PDF

InnovaTint Ultimate | User Manual 1
InnovaTint
ULTIMATE
User Manual
From:
Chromaflo Technologies
Vernissakatu 1
FIN-01300 VANTAA, FINLAND
P.O. Box 42
System Support:
Tel. +358 207 188 000
Fax. + 358 207 188 020
Table of Contents
GENERAL ............................................................................................................................................................................................................... 3
1. WORKING WITH THE INNOVATINT ULTIMATE ............................................................................................................................... 4

1.1. STARTING INNOVATINT ............................................................................................................................................................................. 4
1.2. CLOSING THE INNOVATINT PROGRAM ....................................................................................................................................................... 5
1.3. SOFTWARE ACTIVATION / DEACTIVATION ................................................................................................................................................... 6
1.3.1. Software license activation with an on-line connection .................................................................................................................. 6
1.3.2. Software license activation without an on-line connection ............................................................................................................. 7
1.3.3. Software license deactivation with an on-line connection ............................................................................................................... 8
1.3.4. Software license deactivation without an on-line connection .......................................................................................................... 9
2. MAIN WINDOW .......................................................................................................................................................................................... 10
2.1. ORDER STATUS ........................................................................................................................................................................................ 13
2.2. ORDER LIST ............................................................................................................................................................................................. 14
2.3. ORDER WITH WAITING STATUS ............................................................................................................................................................. 18
2.4. ORDER WITH DONE! STATUS .................................................................................................................................................................... 21
2.5. CREATE A NEW ORDER ............................................................................................................................................................................. 22
2.5.1. Color search .................................................................................................................................................................................. 28
2.5.2. Product search .............................................................................................................................................................................. 35
2.5.3. Can size search ............................................................................................................................................................................. 37
2.6. ENTER CUSTOMER DATA .......................................................................................................................................................................... 38
2.7. EDIT CUSTOMER DATA ............................................................................................................................................................................. 40
2.8. CREATE A NEW COLOR FORMULA ............................................................................................................................................................. 42
2.9. EDIT A FORMULA ..................................................................................................................................................................................... 44
2.10. RESCALE THE FORMULA .......................................................................................................................................................................... 46
3. HELP ............................................................................................................................................................................................................. 47
3.1. USER MANUAL ........................................................................................................................................................................................ 47
3.2. REMOTE CONNECTION ............................................................................................................................................................................. 48
4. COLORANT LEVELS ................................................................................................................................................................................. 50
4.1. LEVELS (COLORANT LEVEL INDICATOR) ................................................................................................................................................... 50
4.2. UPDATE COLORANT LEVELS (ALL COLORANTS VIEW) ............................................................................................................................... 51
4.3. COLORANT LEVELS (SINGLE COLORANT VIEW) ......................................................................................................................................... 55
5. TOOLS AND SETTINGS ............................................................................................................................................................................ 57
5.1. OPTIONS .................................................................................................................................................................................................. 60
5.2. COLOR MATCHING AND REPLICATION....................................................................................................................................................... 64
5.3. STATISTICS .............................................................................................................................................................................................. 67
5.4. EXTERNAL DEVICES ................................................................................................................................................................................. 70
5.5. PRICES AND STOCK.................................................................................................................................................................................. 80
5.5.1. Price .............................................................................................................................................................................................. 81
5.5.1. Stock .............................................................................................................................................................................................. 88
5.5.2. Info settings ................................................................................................................................................................................... 90
5.6. DISPENSER INFORMATION AND COMMANDS .............................................................................................................................................. 94
6. PRODUCT INFO........................................................................................................................................................................................ 104
7. HISTORY .................................................................................................................................................................................................... 105

7.1. ORDERS VIEW ........................................................................................................................................................................................ 106
7.2. CUSTOMERS VIEW ................................................................................................................................................................................. 108
8. BAR CODE DRIVEN TINTING............................................................................................................................................................... 110
9. APPENDIX 1............................................................................................................................................................................................... 112
10. APPENDIX 2 .......................................................................................................................................................................................... 114
11. APPENDIX 3 .......................................................................................................................................................................................... 115
12. APPENDIX 4 .......................................................................................................................................................................................... 116
13. APPENDIX 5 .......................................................................................................................................................................................... 141

General
COPYRIGHT 2010, Chromaflo Technologies. - All rights reserved in all countries. No part of this
material may be translated into any other languages and/or adapted and/or reproduced in any
form, or by any means, electronic or mechanical, including but not limited to photocopying and
recording, without prior written permission of Chromaflo Technologies.
Information in this manual is subject to change without notice and does not represent a
commitment on the part of Chromaflo. Any reference to companies, names, dates and addresses
used in the screens and/or examples is purely accidental, unless otherwise stated, and is intended
solely to clarify use of the Chromaflo Technologies products.
Chromaflo shall not be liable for technical or editorial errors or omissions made herein; nor for
incidental or consequential damages resulting from the performance or use of this material.
The names of the products used might be trademarks or registered trademarks of their respective
companies.
(Reference software version 1.4.0 beta 6. 7.1.2013)

1. Working with the InnovaTint Ultimate
1.1. Starting InnovaTint
InnovaTint Ultimate can be opened by using the desktop short cut, or from the start menu.
Start menu Programs Corob Windows Software InnovaTint 1.4.0
When starting the program, the nozzle purge operation appears.
1.OK: The button to start the purge.

2.ABORT: The button to continue the
program startup without the tinting
machine purge operation.
Note: See further information about

the purge operation in section 4.6.
1 2
1.2. Closing The InnovaTint program
The InnovaTint program can be closed from either the symbol (on the upper right corner of
the main window), or from the drop down menu (on the upper left corner of the main window).
The symbol
to close the
program.
The drop down
menu item Exit
to close the
program.
When a pop-up window is displayed, it can be closed in two ways:

1.X: Click on the X button to exit this
page.
1 2. CANCEL: Click on the CANCEL
button to exit.
2
1.3. Software activation / deactivation
1.3.1. Software license activation with an on-line connection

When the trial period has expired, the following screen is displayed when starting the program.
1.ACTIVATE: The button to proceed
to the software activation page.
2.Alternatively, during the trial period

the activation screen can be navigated
to from the upper left hand side menu.
2
3.License code: The text field for the

license code obtained during the
purchase of the software.
4.ACTIVATE NOW: The button to
3 activate the software.
5.MAIN PAGE: The button to return to
the previous screen.
6.Activation completed text will

appear if the activation was
successful. If the code was not correct,
the Invalid license code error
message is displayed.
7.CONTINUE: The button to return to
6 the main screen of the program.
See further instructions about this function in the separate InnovaTint activation manual.
1.3.2. Software license activation without an on-line connection
When the trial period has expired, the following screen is displayed when starting the program.
to the software activation page.
2. Alternatively, during the trial period

the activation screen can be navigated
to from the upper left hand side menu.
2
3.INSTALLATION ID: The code

needed to be input into the Nalpeiron
activation portal
(www.internetactivation.com), together
with the license code provided at the
time of purchase. Alternatively both
codes can be sent to Chromaflo
3 ([email protected]) to obtain the
Unlocking code.
4.Unlocking code: The text field to
input the unlocking code obtained from
4
either the Nalpeiron activation portal or
from Chromaflo.
5
5.ACTIVATE NOW: The button to
activate the software.
6.Activation complete text will appear

if the activation was successful. If the
code was not correct, the Invalid
license code error message is
displayed.
7.CONTINUE: The button to return to
6 the main screen of the program.
1.3.3. Software license deactivation with an on-line connection
The software license can be removed from the use at anytime via the Software activation section.
1.Navigate to the activation screen in

the upper left hand side menu.
1
2.BACK: The button to return to the

main screen of the software.
3.REMOVE LICENSE: The button to
proceed to the software license
removal page.
2 3

5.REMOVE SOFTWARE LICENSE: the
button to remove the software license.
4
5 6.MAIN PAGE: The button to return to
the previous screen
5
7.The software license has been

removed text will appear if the
deactivation was successful. If the code
was not correct, the Invalid license
code error message is displayed.
8.EXIT: The button to exit the
program.
1.3.4. Software license deactivation without an on-line connection
The software license can be removed from use at anytime via the Software activation section.
1.Navigate to the activation screen in

the upper left hand side menu.
1
2.BACK: The button to return to the

main screen of the software.
3.REMOVE LICENSE: The button to
proceed to the software license
removal page.
2 3

5.OK: The button to generate the
deactivation code.
4 5 6.The text field for the deactivation
code.
7.Copy to Clipboard: The button to
6 7 copy the deactivation code onto the
clipboard.
8
8.MAIN PAGE: The button to return to
the previous screen.
9.CONTINUE TRIAL PERIOD: (No

action)
back to the activation process.
9 10
2. Main window
1.Order list
4.Tool tabs
2.Order edit
5.History tab 6.Notes area
3.Color preview,
Formula,
colorant levels
The user interface is subdivided into the following main areas:

1.The left hand area: This area shows the list of currently managed orders. It shows the
orders sorted by the processing time, including the color name, the product name and the
processing status.
2.The central area: This is the area to create and edit the orders. Color formula, base product
and can sizes can be selected. Also the order status can be changed by saving the order or
processing it through the dispenser. See further details about this function in section 2.
3.The right hand area: This area is used to view various details such as color preview, colorants
used in the currently selected formula, colorant levels in the dispensing machine canisters, and
extra info, like: price, tax, margin, total volume, etc.
4.The tool tabs: Using the tabs on the very right side of the screen, the maintenance tools can be
accessed. There are 4 tab pages available:
4.1 Help: This is the page to search help from the users manual. See further details
about this function in section 3.
4.2 Colorant levels: This is the page to view and update the colorant levels of the
colorant canisters of the dispensing machine. See further details about this function in
section 4.
4.3 Tools and settings: This is the page for example to set the settings for the label
printer, the spectrophotometer, and the dispensing machine. See further details about this
function in section 5.
4.4 Product info: This is the page to view information about the product that has been
selected. See further details about this function in section 6.
5.The History tab: All previously dispensed orders can be accessed using the History tab on the
bottom of the application window. See further details about this function in section 7.
6.The Notes area: In this area, symbols for alternative color formula and primer suggestions are
displayed. Also, this area provides information regarding the formula for the chosen color, for
example if the formula is low hiding (comment =LH). The comment can then be explained to the
customer in advance.
Banner Action buttons for

the banners
The user interface has also the banner area that is changeable. In the banner, there is the
possibility to display customized company banners. Multiple banners with a rotating or looping
function can also be displayed. It is always possible to return to the previous banner with the
action buttons on the lower right hand side of the banner. The banners to be displayed can be
changed during the replication process. This functionality is handled with the InnovaTint LAB
software.
The program starts in the main window with the ORDERS list on the left hand side of the screen.
From this window previously made orders can be selected.
The software will create a new, empty order, assigning it a unique ID (for the future reference)
and a timestamp. The newly created order will have an unconfirmed! Status. This will be
displayed in the left area of the application window, on top of the orders list. At this stage, the
order is not yet saved into the program.
To complete the order and save it, making it available for dispensing, a color, a base product and
a can size must be filled in. The selection of this data can start from the color or from the product,
independently. Possible choices are offered based on the current color/product selections, upon
compatibility and upon availability of products stocks, colorants level etc.
2
1
1.Select an order: Click on a previously made order from the orders list.
2.Create new order: The button to create a new order.
3.New order: An alternative button to create a new order.
Alternatively, click the F2 function button on the keyboard to create a new order.
See further instructions on creating a new order in section 2.5.
2.1. Order status
All dispensing jobs are handled with orders that have been created within the InnovaTint software.
The main tasks will be to create, edit, and dispense saved orders. All orders will have a status
depending on what stage of the process they are.
Possible orders statuses are:
unconfirmed! The order will remain in the unconfirmed! status until all of
the mandatory information has been filled in (color formula,
base paint, can size, etc) and saved.
waiting The order will have the waiting status when all of the
mandatory information has been filled in, and the order has
been saved.
preparing The order will have the preparing status when the order
has been sent to the dispenser and the dispensing is in
progress.
done! The order will have the done! status when it has been
processed by the dispenser.
2.2. Order list

On the left hand side of the screen is the ORDERS list. Orders with the waiting status can be
dispensed or edited. Orders with the done! status can be re-dispensed or used as a template for
new orders.
Saved orders can be selected from the orders list, by clicking on the order field. When an order
has been selected from the list, the COLOR PREVIEW, FORMULA, EXTRA INFO, and
COLORANT LEVELS become visible on the right hand side of the screen.
COLOR PREVIEW
CLICK TO SELECT
FORMULA
Colorant level Show/Hide

indicator button
LEVELS/EXTRA
INFO
The default formula unit on the FORMULA display can be set from the Options section of the Tools
and settings page. See further instructions about this function in section 5.1. Alternatively, the
unit of the formula display can be changed by selecting an alternative from the drop down list.
Formula unit for

display
Items to be shown on the EXTRA INFO table can be set from the Extra information and
Hide/Show items sections of the Info settings tab page of the Tools and settings >
Prices and Stock >Info settings page. See further instructions about this function in section
5.5.2.
Note1: A discount (%) for the order can be set by double clicking with the left mouse button on
the value in the Set discount (%) field.
Note2: An alternative currency to display order prices can be selected from the dropdown list.
See further instructions about this function in section 5.5.2.
Alternative
EXTRA INFO
currency
Set discount %
The EXTRA INFO and LEVELS can be set to be visible or hidden via the buttons: and
.
If the colorant levels in the tinting machine canisters are below either the warning or reserve
levels, the indicators and are displayed in the formula section, next to the colorant in
question.
Warning and
reserve indicators
2.3. Order with waiting status
When an order with the waiting status has been selected from the order list, the following
options become available:
1 2 3
1.START DISPENSING: The button to start dispensing the colorants for this order. See more
details on the next page.
2.EDIT ORDER: The button to edit this order. See more details on the following pages.
3.DELETE ORDER: The button to delete this order.
4.Print: The button to print a label for this order. See section 5.4 to select a label printer.
When the START DISPENSING button has been clicked, the following window appears:
The following warning is displayed:
WARNING The last dispensed can
has not been removed if the If
Enable check of can change is selected
(Tools and settings > Dispenser
information and commands >
Dispenser general information section),
and the paint can has not been
removed from the dispensing machine
after the previous dispensing.
1. RETRY: The button to proceed with

the dispensing process. (this will ignore
the can change check warning)
2. OK: The button to start dispensing.

3. ABORT: The button to stop the
dispensing process.
Note: The order status has a

waiting status when the dispensing
process has been aborted.
2 3
If multiple cans are to be dispensed

(based on order),the software will
display the following dialogue and
message Dispensing completed!
Insert next can.
4. OK: The button to start the
dispensing.
dispensing process.
Note: The order status has a

waiting status when the dispensing
process has been aborted.
4 5
When the EDIT ORDER button has been clicked, the following options become available:
1.Change items, if needed: color,
2 3 4 product, can size, number of cans.
1 2.Edit customer data: The button to
edit customer data. This option is
available only if the customer is already
assigned to this order. See further
5 details about this function in section
2.7. If the customer is not already
assigned to this order, the Enter
customer data button is visible in the
6 7 8
middle part of the screen. See further
details about this option in section
2.6.
3.Reset changes: The button to reset
all changes made.
4.Rescale formula: The button to
rescale the formula. See further details
about this function in section 2.10.
5.Formula editing: The button to edit
the formula. See further details about
this function in section 2.9.
6.SAVE AND TINT: The button to save
changes and dispense the colorants.
7.SAVE: The button to save changes.
8.DISCARD: The button to ignore any
changes made and keep the original
order details.
2.4. Order with done! status
When an order has been selected with the done! status from the order list, the following options
become available:
1 2 3
1.CREATE NEW: The button to clear all selections and create a new order. Proceed as in to
Create new order. See more details in section 2.5.
2.TINT AGAIN: The button to re-dispense this order. Follow the same procedure as in START
DISPENSING on section 2.3.
3.USE AS TEMPLATE: The button to use this order as a template when creating a new order.
Follow the same procedure as in EDIT ORDER in section 2.3.
4.Print: The button to print a label for this order. See section 4.4 to select a label printer.
2.5. Create a new order
When the Create new order button is clicked, the following window appears:
11
12
1 2 3
5
4 6
13
7 8 9
10
The new order window has the following options:

1.COLOR: The color selector field. The place to type in the color code/name.
2.COLOR LIST: The button to open the color selector list. See further details about color search
options in section 2.5.1.
3.CHOOSE OR MEASURE A COLOR (EYE): The button to open the color measurement or
choose color from color card window. See further details about color search options in section
2.5.1.
4.PRODUCT: The product selector field. The place to type in the product code/name into the field.
See further details about color search options in section 2.5.2.
Note: It is possible to select first the product before the color. The order of these fields can be
changed via the Program settings section of the Tools and settings > Options page. See
further instructions about this function in section 5.1.
5.PRODUCT LIST: The product selector drop down list. See further instructions in section
2.5.2.
6.PRODUCT TREE: The product selector drop down list with grouped products. See further
instructions in section 2.5.2. The product grouping is set within the InnovaTint LAB software.
7.CANSIZE: The Can size selector drop down list. See further details about can size search
options in section 2.5.3.
8.QUANTITY TO TINT: The number of cans to be tinted.
9.BASE: The base paint code only is displayed.
10.DELETE ORDER: The button to delete the order (opens up a dialogue to confirm the deletion
request).
11.Clear: The button to clear all selections made.
12.Enter customer data: The button to create or select a customer. See further details in
section 2.7.
13.New formula: The button to create a new formula. See further details in section 2.8.
When the color, product and can size information (or when new formula) has been entered, the
following options become available:
6
1 2
3
7
1.SAVE AND TINT: The button to save the order and to dispense colorants.
2.SAVE ORDER: The button to save the order without dispensing the colorants.
3.Comment: The text field to enter comments for the formula. The comment will be added to the
customer data, if customer data is activated.
4.Re-scale formula: The button to re-scale a formula. See further details from section 2.10.
5.Formula editing: The button to edit a formula. See further details from section 2.9.
6.Show (LEVELS): The button to show/hide colorant canister levels information.
7.Show (EXTRA INFO): The button to show/hide EXTRA INFO table.
After selecting the can size, the clock folder symbol may become visible in the notes area, if an
alternative color formula is available. Also, the paint brush symbol may be visible when a primer
product is needed for the chosen color.
Symbol for alternative

color formula
Symbol for primer

selection
After clicking on the Clock symbol the

1.Click on the desired formula.
1 2.Use the slider to scroll to view other

formula, if multiple versions are
available.
3.OK: The button to select the formula
and proceed onwards to order creation.
OR
4.CANCEL: The button to use the
2 default formula.
3 4
After clicking on the Paint brush

symbol the following window appears:
1.The visual interpretation of the
selected color.
2.The visual interpretation of the
suggested primer color.
1
3.OK: The button to select the
suggested primer color and proceed
with the order creation.
2 OR
4.CANCEL: The button to return to
previous window without selecting a
primer.
4
3
Note: The automatic primer suggestion
is set up in the Program settings
section of the Tools and Settings >
Options > MORE page. See further
instructions in section 5.1.
Note: When the primer suggestion has been accepted and the top coat order created, the program
will create a new order for the primer and it will have the waiting status in the dispensing queue.
The can size is determined by the top coat can size.
When the SAVE AND TINT button has been clicked, the following options become available:
The following warning is displayed:
WARNING The last dispensed can
has not been removed if the If
Enable check of can change is selected
(Tools and settings > Dispenser
information and options > Dispenser
general information section), and the
paint can has not been removed from
the dispensing machine after the
previous dispensing.
1. RETRY: The button to proceed with
the dispensing process. (this will ignore
the can change check warning)

dispensing process.
2 3
If multiple cans are to be dispensed

(based on the order),the software will
display the following dialogue and
message Dispensing completed!
Insert next can.
dispensing process.
4 5
Note: An attempt to dispense a formula with a colorant level lower than the reserve level will
result in the following warning message: ERROR Colorant level too low!. The dispensing
process will be aborted.
Note: Reserve and warning level symbols are also displayed in the FORMULA table.
Colorant level below reserve

level
Warning message
Colorant level below warning

level
2.5.1. Color search
In the New order window, the following options are available when searching for a color:
1
2 3
1.COLOR: Color name or color code or part of it can be typed into this field. Possible choices
are offered from a drop down list showing the color name and a preview. Matching choices are
sorted alphabetically by color code.
2.Color list selector button.
3.Choose or measure a color (color eye). See further details about this option on the next
page.
4.The most popular colors are highlighted, if this option has been enabled via the Program
settings section of the Tools and settings > Options page. See further instructions about
this function in section 5.1.
When the Choose or measure a color (color eye): button has been clicked, the
1.Color card: The drop down list to
select a color card.
1 2.Filter colors: The field to narrow

down options by applying a filter.
2.Colors list: The list to select a color.
3.Measure: The button to measure a
2 color with the spectrophotometer. See
6 further details about this function on
the next page.
4.Continue: The button to proceed
after a color selection has been made.
3
5.Harmonies: See further instructions
about this item below.
4 5 Note: The harmonies button is only

visible when the reflectance data is
available for the selected color. The
behavior of Harmonies function is
controlled in Program settings
section of the Tools and settings >
Color matching page. See further
instructions about this function in
section 5.2.
When the Harmonies button has been clicked after selecting a color from the color card, the
1.Analogous harmonies: Color
preview of analogous harmony colors
are displayed. Select a color by clicking
1 on the color preview.
2.Complementary: Color preview of
complementary colors are displayed.
Select a color by clicking on the color
preview.
2
3.Continue: The button to proceed
after making a choice.
3
When the Continue button has been clicked after selecting a color, the following window appears:
1.PRODUCT: The product field. Type
in the product name, or use the
product list or product tree button to
search and select a product.
2.Use: The button to proceed after the
product has been selected.
1
Note: After this the can size has to be

selected before an order can proceed.
2
When the Measure button has been clicked on the Choose or measure a color page, the
following window appears:
1.Measure: The button to measure a
sample with a spectrophotometer.
Note: If the spectrophotometer has
not been calibrated, the program will
first request this to be carried out using
a black trap and a white tile. See
1 further details about this function on
the next page.
When the color has been measured and the product and can size selected, the following options
become available:
When a color has been measured:
1.PRODUCT: The product field. Type
in the product name, or use the
product list or product tree button to
search and select a product.
1
Note: Product list products are

commented, if they cant be chosen for
matching.
4 2.Find closest: The button to find the

closest matching color from the color
cards.
2 3 3.Match: The button to make a color

matching with the measured color as
the standard.
4.HARMONIES: The button to select
the closest harmony color.
When the Find closest button has been clicked, the following window appears:
1.The closest colors are listed in the
table with the color difference value.
2.COLOR PREVIEW: The visual color
difference is displayed on the screen.
1 Standard on the left, and the selected
2 color on the right.
3.SELECT: The button to select a
highlighted color.
When the Match button has been clicked, the following window appears:
1.The closest colors are listed in the
table with the color difference and cost
values. Select a color formula by
highlighting the row with the right
1 2 mouse button.
2.COLOR PREVIEW/FORMULA: The
color preview and the formula are
displayed on the screen.
3.SELECT: The button to select a
highlighted color.
3
Note: Basic settings of find closest color and color matching can be found in Program
settings section of the Tools and settings > Color matching page. See further instructions
about this function in section 5.2.
When the Measure button has been clicked on the Choose or measure a color page but the
spectrophotometer has not been calibrated, the following calibration process begins automatically.
1.READ: The button to make the
measurement of the black calibration
trap.
2.READ: The button to make the

measurement of the white calibration
tile.
3.OK: The button to return to the

sample measurement process after the
calibration has finished.
Note: The spectrophotometer has to be installed before starting the calibration process. The
spectrophotometer can be installed from the Spectrophotometer section of the Tools and
settings > External devices page. See further information about the spectrophotometer
installation in section 5.4.
When the Harmonies button has been clicked after measuring a color, the following options
become available:
When Harmonies button is clicked
after measuring a color:
1.Analogous harmonies: The Color
1 preview of analogous harmony colors
are displayed as squares. Select a color
by clicking on the color preview square.
2.Complementary: The color preview
of complementary colors are displayed
as squares. Select a color by clicking
2 on the color preview square.
3 3.Use: The button to proceed after the
color has been selected.
2.5.2. Product search
In the New order window, the following options available when searching for a product:
2
3
1
1.PRODUCT: Product name or product code or part of it can be typed into this field. Possible
choices are offered in a drop down list, showing the product name and a preview.
note: When Product tree mode selected, its possible to search also by group name.
2.Product list button. See further details about this function on the next page.
3.Product tree button. See further details about this function on the next page.
When the product list button has been clicked:

1.The product list button to display all

products becomes available in
alphabetical order.
2. Select a product from the dropdown
list
When the product tree button has been clicked:

1.The product tree button to display
all of the products available. Similar
products are grouped to help find a
suitable product.
2.Select a product from the dropdown

list
1
Note: The product grouping can be set up in the InnovaTint LAB software.
A non-compatible product choice is still possible (unless disabled, see below), but choosing one of
those will undo the color selection. The color list is now filtered based on the chosen product.
Note: Incompatible color/product combinations can be disabled from the Program settings
section of the Tools and settings > Options page. See further instructions about this function
in section 5.1.
2.5.3. Can size search
In the New order window, the following options are available when selecting a can size:
1.CANSIZE: The drop down list to
select a standard can size.
OR
2.Custom can size: Option to use
another can size. See further
instructions below.
When the Custom can size text has been selected from the CAN SIZE drop down list, the
The desired amount can be typed. After
typing the amount into the field, other
items are scaled accordingly.
1 2
Note. It is possible to type values into
either the volume (1) column or into
the weight (2) column.
3.OK: The button to accept selected

amounts, and return to the previous
page.
After the can size selection has been made, a colorant level check is done to evaluate the
possibility to dispense the selected formula.
It is possible to set a default can size in the General settings section of the Tools and
settings > Options page. See further instructions about this function in section 5.1.
Can sizes are created with the InnovaTint LAB software, however, shop owner may limit the
available selection in the Tools and settings > Prices and Stock > Stock page. See further
instructions about this function in section 5.5..
2.6. Enter customer data
In the Create new order or Edit order view, it is possible to include customer information with the
order.
1. Enter customer data: The button

to save customer information into the
1 order.
When creating a new order or editing
an existing one, this step can be done
either before or after the
product/color/etc has been selected.
When the Enter customer data button has been clicked, the following window appears:
1.Customer name: The text field to enter a
customer name. When the cursor is placed in the
5 field, and the Enter button is clicked on the
1
keyboard, the list of customers is opened up.
Narrow down the search result by typing a part of
4 the name before pressing the Enter button again.
The new customer text is placed on the top of
the list. It is possible to create a new user by
clicking on this text.
2 2.Details: Optional text fields for further

customer details, like: address, and email.
3.Receive marketing offers? When the check
box is enabled it is then possible (after
agreement) to send marketing material to this
3 customer.
4.Notes: The free text area for additional notes.
5.Clear: The button to clear all selections made
in the customer data page.
6 7
6.OK: The button to save all data and return to
the order view.
7.CANCEL: The button to abort the customer
data process and return to the order view.
Note: It is possible to search for existing customers by using the customers name, the
customers company, the phone number, or by their email address. Type in either the full name or
number, or part of it to find the list that matches the search criteria.
matching customer details are shown. Select existing customer or New customer.
Note: The customer contact details will be displayed in the Orders main page when the customer
has been assigned to the order.
Note: The Country is preselected if the site information is completed in the Site information
section of the Tools and settings > Color matching and replication > MORE page.
2.7. Edit customer data
In the Edit order view, it is possible to edit also the customer information.
1. Edit customer data: The button to

edit customer information.
1 When creating a new order or editing
an existing one, this step can be done
either before or after the
product/color/etc has been selected.
When the Edit customer data button has been clicked, the following window appears:
1.Customer name: The text field to enter
a customer name. When the cursor is
1
5 placed in the field, and the Enter button is
clicked on the keyboard, the list of
customers is opened up. Narrow down the
4 search result by typing a part of the name
before pressing the Enter button. The new
customer text is placed on the top of the
list. It is possible to create a new user by
clicking on this text.
2
2.Details: Optional text fields for further
customer details, like: address, and email.
3.Receive marketing offers? When the
check box is enabled it is then possible
3 (agreement) to send marketing material to
this customer.
4.Notes: The free text area for additional
notes.
6 7 5.Clear: The button to clear all selections
made in the customer data page.
6.OK: The button to save all data and
return to the order view.
7.CANCEL: The button to abort the
customer data process and return to the
order view.
2.8. Create a new color formula
It is possible to manually create a new color formula when creating a new order. This new formula
is saved only into the local database and can only be viewed and re-tinted afterwards through the
History function, or by selecting an order with this formula from the orders list.
1.Click on the New formula

button
When the new order has been created and the New formula button has been clicked, the
following items need to be filled in before proceeding further:
1.COLOR: Name or Code for the
1 formula
2.PRODUCT: Product selector
2
Then other items needs to be filled in:

3.BASE: Base selector
4.CANSIZE: Can size
selector
5.UNIT: formula unit
selector
6.Enter the Colorant
3 amounts (or use and +
buttons, or type into the
text box)
4
7.OK: The button to save
the formula.
5 6
8.CANCEL: The button to
exit this window without
saving a formula.
7 8
Note: If the name or the code of an existing color is used in the new (or modified) formula, the
original color formula is not overwritten.
Note: If the option Prevent color code copying from custom formulas is selected in the Program
settings section of the Tools and settings > Options > MORE page, the color name or
color code needs to be unique.
2.9. Edit a formula
It is possible to edit a formula within an order that has the waiting... status.
Note: It is also possible to edit a formula at any time that the order is still in the unconfirmed!
status
When the order has been selected from the orders list, and the EDIT ORDER button has been
clicked, the Formula editing button becomes visible.
1.Click on the Formula editing
button.
1
When the Formula editing button has been clicked, the following window appears:
4
5
1.Change: COLOR name, PRODUCT, BASE paint, CAN SIZE, UNIT (if needed)
2.Edit the formula by using and buttons or by typing the number into the box
3.Show incompatible colorants: When the check box has not been enabled, the colorants
which are not compatible with the product selected are hidden. The rules for compatible
colorants are set up in InnovaTint LAB program.
4 OK: The button to save changes.
5.CANCEL: The button to exit this window without saving a formula.
6. COLOR PREVIEW: The window to display color before and after the edit. (Does not
represent real color difference, just an estimation)
Note: If the name or the code of the existing color is used in the new (or modified) formula, the
original color formula is not overwritten. The new color formula can then only be viewed through
the History function.
Note: When a formula has been edited the formula name is automatically changed to correspond
to the changes made in the formula.
2.10. Rescale the formula
It is possible to rescale a formula in a saved order with the waiting... status.

Note: It is also possible to re-scale a formula at any time that the order is still in the unconfirmed!
status
When the order has been selected from the orders list, and the EDIT ORDER button has been
clicked, the Rescale formula button becomes visible.
1.Click on the Rescale
formula button.
1
When the Rescale formula button has been clicked, the following options become available:
7
1
3
2
4 5 6
1.Slider to rescale the formula from light to dark

2.Scaling % can be seen within the text field
3.Scaling % can be seen within the color name field
4.SAVE AND TINT: save the re-scaled formula and tint it immediately
5.SAVE: save the re-scaled formula and place it back into the order list
6.DISCARD: use the original order
7.Reset: use the original order
3. Help
3.1. User manual
Help file can be accessed by clicking the HELP-tab (1) or pressing F1-button, following window will
appear.
5
1
2
3
1.Miniature icon to display page content on a small preview page

2.Bookmark icon allows quick access to selected section
3.Appendix icon to display possible additional appendixes
4.Search icon to search a word or words from the manual
5.Toolbar for zooming in/out, how the page is displayed. Print content out, or quick access to
selected page.
3.2. Remote connection
Remote connection can be established by clicking help-icon (1) or alternatively from the upper
left hand side menu (2). Following window will appear.
Note: Remote connection is optional during installation and requires Internet connection to work.
If not installed, these controls are hidden.
1.ID number of your PC

2.Password for secure connection
When the Technical support makes the connection to the PC, it can have full control of it. It is
possible to chat with the support, follow the actions they make, exchange files, all needed to fix
the problem.
4. Colorant levels
4.1. Levels (colorant level indicator)
In the lower section on the right hand side of the screen the colorant level indicators are shown.
In this view, the five canisters with the lowest colorant amounts are shown.
It is possible to set this information to be visible or hidden by clicking the or the
buttons.
Colorant levels
tab page
Show/Hide
Colorant level button
indicator
Sorting criteria
The colorant level list can be sorted into ascending or descending order based on either the
colorant existence in the formula or by the canister order in the tinting machine.
4.2. Update colorant levels (all colorants view)
Use the COLORANT LEVELS > Update colorant levels tab page to get an overview of the
colorant levels in the tinting machine canisters, as well as to see the colorant level warning
symbols. From this page it is also possible to update the colorant levels for one or all of the
canister at the same time.
Access is available by clicking on the COLORANT LEVELS text on the right hand side of the
screen, or by clicking F3 button on the keyboard (see the picture on previous page).
On this page the following items are displayed:
1 4 10
Click on to the field

to navigate into the 9
single colorant view
6 7
8
1. By selecting the sorting method

from the drop down list, it is possible
to sort the order of the colorants by
either the canister number or by the
filling level.
2.The filling levels are illustrated with

green bars. 10 green bars meaning a
full canister.
When the filling level is lower than the
warning level, the bar color is
changed to yellow and the yellow
warning symbol is shown.
When the filling level on the colorant
canister is below the reserve level,
the red alert symbol is shown.
3. To increase (or decrease) the filling

levels (with full colorant cans) use the
(+) and (-) symbols.
4. The size (volume) of the colorant

can used is defined on the upper part
of the screen. Select a custom can size
from the drop down list (only valid if
custom can sizes for the colorants are
set in the InnovaTint LAB), or type
into the field the volume of the can.
5. The number of (full) colorant cans

needed to fill the canister. The
colorant can size is defined in item 4.
6.Use REFILL ALL button to refill all

of the colorant canisters at the same
time.
7.Click on the REFILL BY BARCODE

button to refill the canisters by using
the bar codes to identify the colorant
can and the canister.
Note: The Bar code actions check box
has to be enabled in the Bar code
section (Tools and options > External
devices page).
8.Click on the SAVE button to save

changes.
9.To close the Colorant levels lab page,

click on the X-symbol.
10. To set the factor for refilling

success rate.
Note: Increasing or decreasing colorant levels or using the refill all button does not actually
change any physical colorant amounts in the tinting machine. These are only indicators that can
be used to view material usage, and to provide warning messages. The canisters in the tinting
machines have to be filled manually before updating this information into the software.
To get a more detailed over view of the colorant levels of a single colorant, click on any part of the
colorant field on the Update Colorant Levels tab page.
When the REFILL BY BARCODE button is clicked, the following window opens up:
1.Colorant barcode: The colorant bar code can be read with the bar code reader after
the pointer is placed into this field.
2.Canister barcode: The canister (in the dispensing machine) bar code can be read with
the bar code reader after the pointer is placed into this field.
After both the colorant and canister bar codes are read, the following window appears:
3.OK: The button to confirm the filling of the canister with the selected colorant.
If either a wrong colorant or canister pair is read with the bar code reader, the following message
is displayed:
4.CANCEL: The button to abort the operation, and return to the previous window.
4.3. Colorant levels (single colorant view)
Use the COLORANT LEVELS > Update colorant levels > Colorant levels tab page to update
the colorant level in a single tinting machine canister.
Access can be made by clicking the COLORANT LEVELS text on the right hand side of the screen,
or by clicking F3 button on the keyboard (see the picture on previous page). Then continue by
clicking on any part of the screen to select a single colorant canister.
On this page the following items are displayed:
6 12 10
4
7
5
1 2 8
9
3
11
1.Canister capacity: The size

(volume) of the colorant canister in the
tinting machine.
2.Current level: The amount of

colorant left in the colorant canister in
the tinting machine. Click on Edit
button to manually change the volume.
3.Refill: The buttons to increase (-)

or decrease (+)colorant levels. Only
the full colorant cans are used.
4.Click on the Show all button to

return to the Update colorant Levels
page.
5.Use the arrow buttons to navigate to

the next or previous colorant within the
list.
6.The size of the colorant can can be

used to refill the canister. When using
the refill + and buttons only full
colorant cans are used. Select a
custom can size from the drop down
list (only valid if custom can sizes for
the colorants are set in the
InnovaTint LAB), or type into the
field the volume of the can.
7.Reset: The button to use default

values.
8.Warning level: When the colorant

amount in the colorant canister in the
tinting machine is below the warning
level, the yellow warning level symbol
is displayed in the formula, and in the
levels section on the main screen. Click
on the Edit button to change the
warning level amount or drag the slider
to desired level.
9.Reserve level: When the colorant

amount in the colorant canister in the
tinting machine is below the reserve
level, the red warning level symbol is
displayed in the formula, and on the
levels section in the main screen, and
dispensing of the formula containing
this colorant is disabled.
10.Use the X button to return to the

previous view.
11.Click on the SAVE button to save

changes.
12. To set the factor for refilling

success rate.
5. Tools and settings

The TOOLS AND SETTINGS tab is to enable changes to various settings like language, units,
printers, dispensing machines, and much more. Access is possible by clicking on the TOOLS AND
SETTINGS text on the right hand side of the screen, or by clicking on the F4 button on the
keyboard.
Tools and settings

tab page
The TOOLS AND SETTINGS tab page has six parts, which all have further subpages within.
Printers
Options
Matching and
replication
Pricing
Statistics Tinting machines
1.Use button to navigate back to

the main page of the program.
2.Use the MORE button to see
further details within any of the
subpages available.
2
1.Use the BACK button to navigate

back to the previous page.
After all changes

2.Restart the program to make the
changes effective.
2
5.1. Options
In the Options section of the Tools and settings page, the following are available:
1.Language (Default language is

1 English. All available languages are
listed in Appendix 3.
2 2. Formula unit of measure. This
unit is used to display the color formula
on the main page. Units available are
handled by the InnovaTint LAB
3 software.
3.MORE The button to view more
details.
On the Options > MORE page there are four different sections available: (1) general settings,
(2) formula history, (3) number of waiting orders, and (4) program settings.
1
4
3
In the General settings section, the following options are available:

1.Language (see previous page)
1
2.Formula unit of measure (see
2 previous page)
3 3.Levels unit of measure. The

default unit of measure used on the
4 canister sizes.
5 4.Resolution. Smallest screen
resolution for Shop 1024*695 (actual
size 1024*768), space needed for
default Windows bar. InnovaTint
Shop can use higher resolution, and
then the user interface is scaled to the
desired resolution. However, the
monitor used needs to support this
function. Fit to screen is the largest
resolution possible without changing
the width-length ratio. Full screen
will use all available window space,
including the Windows bar. This way
it is possible to use the whole space of
the wide screen monitor. When the
screen is wider, the order creation
section is also wider.
5.Default can size determines which
can size is used as the default when
making a new order. This selection will
make the order process faster, but the
possibility for error (due to wrong can
size) greater.
In the Formula history management section, the following options are available:
For the formula versions, select one of
the following options via a radio
1
button:
2 1.Enable all formula versions: all

formula versions are stored and
displayed.
3
2.Enable No. of formula versions: It
is possible to determine how many
formula versions are stored and
displayed.
3.Disable: no formula versions are
used.
NOTE: As a default, formula versions
are not displayed. If this option is used
and the product/color in a new order
has a history formula, then the clock
icon is displayed in the notes area. If
the clock icon is clicked, then it is
possible to select which formula to
choose.
In the Orders list section, the following options are available:

1.Max num. of waiting orders: The
1
maximum allowed number of waiting
orders. When the maximum number of
waiting orders has been reached, no
new order can be created.
In the Program setting section, the following options are available:

1.Enable extra info page: When the
check box is enabled, the extra info
1 panel on main screen is in use.
2 2.Most used colors: When the check
box is enabled, the most popularly sold
3 colors are placed on top of the colors
4 list in the color selector and highlighted
5 with a yellow background color.
3.Use as template: When the check
box is enabled, the previous order can
7 be used as a template (when all order
6 information is copied, including the
customer information), and placed
automatically into edit mode.
8 4.Re-scale formula: When the check
9 10 box is enabled, the re-scale slider is
visible in the main window.
5.Swap Color/Product search
11 11 fields: When the check box is enabled
the order of color/product selectors in
the Orders screen is changed.
a b 6.Show user name instead of color

code in orders list: When the check
box is enabled, the user name is
displayed in the orders list instead of
the color code.
7.Remove incompatible
product/colors from the list: When
the check box is enabled, the invalid
products/colors are not displayed in the
products or colors list.
8.Edit formula: colorant
concentration block: When the check
box is enabled, it is not possible to
save a formula that violates the
matching rules. Matching rules are set
in the InnovaTint LAB software.
9.Prevent color code copying for
custom formulas: When the check
box is enabled, the color code of the
regular color cannot be used in the
custom formula.
10.Hide formula volumes: When the
check box is enabled formula volumes
are not displayed for the user, only
colorant codes.
11.Enable stock management:

When the check box is enabled, the
stock management is enabled on the
Stock tab page of the Tools and
settings > Prices and stock >
MORE page.
12.Enable primer suggestion: When
the check box is enabled, the
automatic primer suggestion is in use
to optimize the hiding of the color. Two
options are available to choose from
via radio buttons:
a)Show primer icon only: When this
radio button is selected the primer icon
is shown in the notes area of the main
screen (when a primer is needed), and
the primer order is automatically
created.
b)Open primer window: When this
radio button is selected the primer icon
is shown in the notes area of the main
screen (when a primer is needed) and
the primer selection window
automatically appears. This provides
the option to cancel the primer
selection if not required.
5.2. Color matching and replication
In the Color matching and replication section of the Tools and settings page, the following
options are available:
1 1.Database of tinting system: The

file and the path for the main
2 database (display only).
2. Database of orders: The file and
3 4
the path for the local database
(display only).
3.Shop ID: The unique shop ID.
(display only).
4.MORE: The button to view more
details.
The Color matching and replication > MORE page has five different sections: (1)
Replication, (2) Site information, (3) Harmonies, (4) Closest color search, and (5) Color
matching.
1 3
2 4
5
In the Replication section, the following options are available:

1.Database of tinting system: The
1 file and the path for the main database
(display only).
3 2 2. Database of orders: The file and
the path for the local database (display
only).
5 4
3.Shop ID: The unique shop ID.
(display only).
6 4.Last successful replication:

(display only).
5.Next replication scheduled at:
(display only).
6. Run additional replication: The
button to run an additional replication.
In the Site information section, the following options are available:

1.Company name: The text field for
1 the company name.
2 2.Site: The text field for the site name
(display only).
3
4 3.Address: The text field for the
address of the site.
5
4.Address 2nd line: The text field for
6 the address of the site.
7 5.ZIP code: The text field for the
postal or ZIP code of the site.
8
6.Country: The drop down menu to
select the country of the site. (to be
used in customer entry as default
country selection)
7.Email: The text field for the email
address of the site.
8.Phone number: The text field for
the phone number of the site.
In the Harmonies section, the following options are available:

In this section, it is possible to select
one of the following options with the
1 radio button:
1.Disable harmonies: Disables color
2 harmonies area.
2.From preferred color cards: The
3 color harmonies are searched from the
preferred color card. Preferred color
cards are set in InnovaTint LAB
4 software.
3. All color cards: The color
5 harmonies are searched from all of the
color cards within the database.
NOTE: may slow down the system
significantly!
4. Selected color card: The color
harmonies are search from the selected
color card.
5. Number of suggested items: Sets
the number of possible harmonies
shown on the screen.
In the Closest color search section, the following options are available:
1.Use only preferred cards: If the
check box is enabled, search for closest
1
color is limited to preferred cards.
Preferred color cards are set in
2 InnovaTint LAB software.
2.Max dE: The maximum allowed color
3 difference value used in the closest
color search.
3.Max number of results: The
maximum number of results to be
displayed in the closest color search.
In the Color matching section, the following options are available:

1.Max dE: The maximum allowed color
1 difference value used in the closest
color search.
2.Max number of results: The
maximum number of results to be
displayed in the closest color search.
2
5.3. Statistics
In the Statistics section of the Tools and settings page, parameters can be set to limit the
statistics search results.
All orders are stored into the local database; this will enable statistical evaluation of the tinting
history.
In this section, the following options are available:

1.Period: The drop down list to
select the viewing period.
1
2.Product: The drop down list to
2 select the Product.
3.Colorant: The drop down list to
select the Colorant.
immediately the search results will

be visible once selections have been
made. Displayed items are:
4.Paint volume
4
5.Price of products sold
5
6.Number of produced cans
6 7.Dispensed colorant volume

8 details.
7
The Statistics > MORE page has three different sections to view statistics. These are sorted
by: (1) Products, (2) Colorants, or (3) Color.
1 2 3
The following options can be used to narrow the search result on all three subpages:
1
3 4
5
1. From and To: The date fields to specify a certain period of time to use as filter criteria.
See below for further instructions about this function.
2.Set range: The selector field to select a predefined time range. Options are: Previous
week, previous month, and previous year.
3.Update: The button to clear the table content.
4.Export: The button to export the statistics view on the table into the text file.
5.Totals: The area to limit search to a particular product/base or group information, for
example, weekdays.
When selecting date fields with the calendar function, the following appears:
2
1
1.The button to open up the calendar.
2.The calendar to select the date. Use the and buttons to navigate to a different
month within the calendar.
5.4. External devices
In the External devices section of the Tools and settings page, the following options are
available:
1.Label printer: The drop down list to

1
show all of the printers installed into
2 the Windows. To install a new printer,
follow the normal Windows printer
3 installation procedure.
2. Label template: The drop down list
to show all of the templates created
with the selected label program;
EasyPrint or AnyLabel (external
software). see further instruction on
coming pages.
details.
The External devices > MORE page has four different sections: (1) External devices (2)
Barcode, (3) Formula exchange, and (4) the Spectrophotometer.
1 3
2
In the External devices section, the following options are available:

1.Label software: The drop
1 down list to select label software,
Easyprint (Chromaflows own
default solution, See APPENDIX
2
4) or Anylabel (alternative
commercial solution)
3
2.Label printer: The drop down
a b list to show all of the printers
4
a installed into the Windows. To
install a new printer, follow
b normal Windows printer
installation procedure.
c 3.Label layout: The drop down
list to show all of the templates
5 created with the selected
software.
6
In case of Anylabel; If a new label
7 template is to be created, then
use the AnyLabel program and
save created label files into
c:\wuser\anylabel\files folder.
a.Preview: Displays preview
sample of the selected layout
(only for Easyprint)
b. Edit: opens EasyPrint designer
program to edit or create new
layouts. See APPENDIX 4 for
further instructions.
4.On request: When the check
box is enabled, the label is
printed only when requested.
When the On request check box is
enabled, There are three options
to choose from:
a. Request number of labels:
When the radio button is
selected, the number of labels to
be printed is asked before
printing.
b. Show print preview: If check
box enabled a preview of the
label is shown
c. Automatically print: When
the radio button is enabled, the
labels are printed when
requested. The number of labels
to be printed is entered into the
text box next to radio button.
5.Before tinting: When the
check box is enabled, the label is
printed before tinting. The
number of labels to be printed is
entered into the text box next to
check box.
6. After tinting: When the check

box is enabled, the label is
printed after tinting. The number
of labels to be printed is entered
into the text box next to check
box.
7.Product info printer: The
drop down list to show all of the
printers installed into the
Windows. To install a new printer,
follow normal Windows printer
installation procedure.
In the Barcode section, the following options are available:

1.Barcode actions: When the check
1 2
box is enabled, the bar code actions
are on, such as: Enter, OK, Tint, and
Save are enabled. These settings are
done in InnovaTint LAB software.
2.Configuration & settings: Click on
configuration settings will open a new
window to further setup barcoding
behavior.
5
1
6 7
1.Order check before tinting: When the check box is enabled, confirmation with the bar
code reader is needed to ensure that the correct can has been placed into the tinting
machine.
2.Order selection from queue: When the check box is enabled, it is possible to select an
order from the tinting queue by reading the paint can bar code with the bar code reader.
When the correct product, can size, or base paint code is read (same code found in the
dispensing queue) the order is automatically tinted. If the same code is found multiple times
within the dispensing queue, the correct one needs to be selected from the list.
3.Barcode reader configuration: By default InnovaTint expects to receive with the read
barcode an initialization character F8 and an ending character Enter, if the barcode
reader has been set for something else, the same selection must be made here.
4.Barcode reader testing: Testing area to test that barcode reader is correctly configured.
5.Colorant canister barcodes: The text field for the bar code for the colorant canisters in
the tinting machine.
6.Save: To save the changes.
7.Cancel: to discard the changes made
8. to exit the view.
In the Formula exchange section, the following options are available:
2 4
1.Reception: The file name and the location for the formula (order) to be
received. InnovaTint can receive orders from an external source if incoming
information is according to the syntax of the Flink program (by Corob) and also
has same product and colorant coding as in the InnovaTint database. The
minimum requirement is that the colorant codes are equal in the incoming order
and in the InnovaTint database. If the incoming order has the correct codes for
the colorants, product, base paint and can size, the order can be accepted
automatically, otherwise the order is handled as a new formula and missing
information has to be added manually. See further instructions APPENDIX 5.
2.Transmission: the file name and location for the formula (order) to be sent
to the external tinting device (other than Corob). Communication between
InnovaTint and a Corob tinting equipment is handled automatically, but if the
requirement is to use a tinting equipment from another supplier, the Flink protocol
can be used to send the formula information to this device. The driver of the
tinting equipment needs to be able to use the Flink protocol.
Regarding the use of the InnovaTint driver, two options with the radio buttons are
available:
3.Use with InnovaTint driver: When the radio button is enabled, the Corob
tinting machine is used for tinting, and the formula is also sent to the Flink file.
The Flink file can be used to send the formula to another program e.g. an external
statistics program.
4.Disable InnovaTint driver: When the radio button is enabled the InnovaTint
driver is disabled and the Flink file is used to communicate with the tinting
equipment. Furthermore, the LEVELS table in the main page, the COLORANT
LEVELS tab, Dispenser information and commands area are disabled.
NOTE: both reception and transmission may have multiple sources set, this can be done by
separating different paths with ;-semi colon sign.
In the Spectrophotometer section, the following options are available:

1.Spectro driver: The drop
down list to select the
spectrophotometer driver;
Datacolor or X-Rite.
2.Configure: The button to
2 3 run the spectrophotometer
configuration / area to
configure the device. See
further instructions about the
4 Datacolor configuration on the
following pages.
Datacolor driver selected
3.Display information and
1
test: The button to display the
spectrophotometer
information. Calibration and
test measurement can also be
done from the popup window.
2
4.Enable reading from the
instrument: When the check
box is enabled the reading
from the spectrophotometer is
3 enabled.
Note: This function has to be

disabled if the
spectrophotometer is not
X-Rite driver selected attached to the computer.
Note: All valid

spectrophotometers are listed
in appendix 2.
When the Display information and test button has been clicked, the following options become
available:
1.Measure: The button to make the
test measurement.
2.Calibrate: The button to calibrate
the spectrophotometer.
1 2
When the Configure button has been clicked (and Datacolor driver selected) the Measurement
Main Window appears.
1.Edit..: The button to edit the already

installed device.
2.Add..: The button to add a new
device.
6 3.Delete..: The button to delete the
1
already installed device.
4.Close. exit window without saving
any changes.
2 3
When the Add.. button has been

clicked, the following window appears:
1 1.Manufacturer/Model: The
spectrophotometer model selector.
2 2.Communication Parameter:
Port: The connector on which the
spectrophotometer is physically
attached.
3
Baud Rate: The communication
setting, use the default value.
4 5 Data Bits: The communication setting,
use the default value.
Parity Bit: The communication setting,
Stop Bit: The communication setting,
3.Serial No: The serial number of the
spectrophotometer.
4.Add: The button to continue the
add new device process.
5.Cancel: The button to abort the
installation without saving.
When the Add button has been clicked

on the Add Instrument screen, the
8
1 following screen appears:
3
1.Specular: Select between Include,
exclude, and gloss.
9
2.Aperture: Extra large, Medium,
2 Small, Ultra small, Extra ultra small.
3.UV-filter: 100% UV (filter off), 0%
UV (filter FL40), Filter FL42, Filter
FL46, Calibrator XX % remaining part
4 of UV, UV ExcL Filter options)
7 4.Auto-Zoom: on/off.
5
5.Transmissions. on/off.
6
6.Calibration time interval (hour):
The frequency of calibration .
8.Calibrate: The button to start the
calibration process.
When the calibrate button has been

clicked on the Calibration conditions
screen, the following dialogue appears:
1.Ready: Click Ready button to
continue.
1 2
When the ready button has been

clicked on the Prepare for calibration
1.Ready: click on Ready button to
continue.
1 2

clicked on the Prepare for calibration
1.Ready: Click on Ready button to
continue.

1
clicked on the Prepare for diagnostic
screen, the following screen appears:
2 1.OK: Click on OK button to continue
2.Print: The button to print a
diagnostic test result.
When the OK button has been clicked

on the Diagnostic test result screen,
the following screen appears:
1.Close: click on Close button to end
the installation and the calibration
sequence.
1
5.5. Prices and Stock
In the Prices and Stock section of the Tools and settings page, taxes, tinting fees, and
margins can be set, together with the option to manage information displayed in the main screen
of the program.
The main window displays the Common

level Tax, Tinting service price, base
margin, and Colorant margin.
The Prices and Stock > MORE page has three tabbed pages: (1) Price, (2) Stock, and (3)
Info settings.
2
1
Navigate to the
lower levels with
the arrow button
5.5.1. Price
Price calculation is driven by a number of parameters that may be inserted to the PRICE_xxx
tables in the main db, and in the corresponding LPRICE_xxx tables in the local db.
If the same parameter is found in multiple tables, the value from the highest priority table is used,
according to this order:
PRICE_COMMON (lowest priority)
PRICE_CANSIZE
PRICE_PRODUCT
PRICE_BASE
PRICE_CAN
PRICE_PRODUCT_COLOUR (only in main db)
PRICE_CNT (highest priority)
Values in the local db have priority over the main db, unless the parameter is locked in the main
db by inserting the parameter name in PRICE_LOCK. In that case the corresponding values in local
db are ignored.
Missing parameters are assumed value of 0, except the rounding steps which default to 0.01.
The following table lists all parameters and the tables where each might be inserted in typical
usage:
PRICE_PRODUCT_
PRICE_PRODUCT
PRICE_COMMON
PRICE_CANSIZE
PRICE_BASE
PRICE_CAN
PRICE_CNT
COLOUR
Parameter Description
TAX Tax rate
CTAX Tax rate on colorants, if different
TINTFEE Tinting fee
BCOST Base cost per can
BCOSTL Base cost per litre (for custom can
size)
BMARGIN Base margin rate
BPRICE Base price
CCOST Colorant cost
CMARGIN Colorant margin rate
MRP Maximum retail price
BROUND Rounding step for base price
CROUND Rounding step for colorant price
LROUND Rounding step for list price
PROUND Rounding step for (final) price
USEPG Enable price groups (non-zero value)
PGLIMIT Price group limit (colorant
cost/nominal quantity, in l or kg) for
each price group
PGCPRICE Colorant price according to price group
PGPRICE Total list price according to price
group
PGBC Barcode of price group
Tax and margins are inserted as numbers between 0 and 1. Tax is relative to tax-free price and
margin is relative to selling price.
It is possible that some or all items are disabled through the InnovaTint LAB software using the
LOCKS function. This will prevent using the Custom values instead of the predefined values. In
this case it is possible to input a new value into the table, but it will not be saved into the local
database.
The rounding of the values are done according to the following example:
1.012 -> 1.01
1.015 -> 1.02
Tax-inclusive prices are generally the above multiplied by (1 + TAX). If rounding is enabled, it is
applied to the tax-inclusive price, and the price before tax, and margin, are calculated backwards
from there. If CTAX is set, it applies to Price of tinting, and TAX applies to Base price.
In the Common data level, the following options are available:
3 4
1.Custom value field

2.Price group: The check box to show
and hide the price groups. The price
groups are set up in the InnovaTint
LAB program.
3.RESET: Reset entered values
4.SAVE: Save entered values
Note: When the price groups are not set up in the InnovaTint LAB software, the items related to
the price groups are not visible.
In the Common data level it is possible to define the following Custom Values into the Custom
value column:
Base margin (%) = Base price Base cost / Base price * 100%
Base price rounding= The rounding of the base paint price
Colorant margin (%) = Colorant price Colorant cost / Colorant price * 100%
Colorant price rounding = The rounding of the colorant price
Final price rounding= The rounding of the final price
List price rounding = The rounding of the list price
Price group limit for group = The price limit for the price group 1.
Tax (%) = Tax rate in percentage of tax-free price.
Tinting service price = additional flat fee, independent of the color
In the Common data > Colorants level it is possible to define the following Custom Values into
the Custom value column for each of the colorants separately:
Colorant cost = (internal) Cost of colorant

Colorant margin (%) = Colorant price Colorant cost / Colorant price * 100%
In the Common data > Can sizes level it is possible to define the following Custom Values into
the Custom value column for each of the can sizes separately:
Colorant price for group = Colorant price for price group 1

In the Common data > Products (when product selected) it is possible to define the following
Custom Values into the Custom value column for each product separately:
Base margin (%) = Base price Base cost / Base price * 100.
Tax (%) = Tax rate in percentage of tax-free price.
In the Common data > Products (when base paint selected) level it is possible to define the
following Custom Values into the Custom value column for each base paint separately:
Base cost (per liter) = Volumetric Base cost (eur/liter).

Base margin (%) = Base price Base cost / Base price * 100%.
In the Common data > Products (when can size of base paint selected) level it is possible to
define the following Custom Values into the Custom value column for each can size separately:
Base cost (per can size) = Cost of can of base (eur/can size xx l)
Base price = Price of base (eur/liter).
Total list price for group = The total list price for the price group 1.
Maximum retail price = Maximum retail price (MRP).
If MRP is set and the calculations would make List price including tax greater than MRP, List price
is set to MRP and Margin is adjusted accordingly.
5.5.1. Stock
In the Stock section of the Tools and settings > Prices and stock page, it is possible to view
and update the stock levels of the base paints.
For the Stock view of the Base paint can size, the following options are available:
2 3 4 5
1.Description (can in use): An option to limit sellable items, can sizes. Can sizes with check box
enabled are in use, by default all the can sizes set in InnovaTint LAB are in use.
2.Stock level check box: Check box to set the can size to be used. The symbol is displayed
if the stock level is negative. It is also displayed in the main screen when using this can size. See
the picture on the next page.
2.Stock level: The current stock level.
3.Warning level: When the number of cans is below this value, the warning message about the
stock level is displayed during the tinting process. The check box in the Stock level column needs
to be enabled to edit this field.
4.Add: The field to add cans into the stock. Use negative numbers to decrease the stock level.
The check box in the Description column needs to be enabled to edit this field.
5.Save: The button to save changes to the warning level and to the stock level.
Stock level
warning symbol
5.5.2. Info settings

In the Info settings under Prices and Stock there are three sections: (1) Extra information,
(2) Currencies, and (3) Hide/Show items.
1 2
In the Extra information section, the following options are available:

1.Show prices for the whole order:
When the check box is enabled, the
1
prices for the whole order are displayed
in the extra info panel.
2
2.Exclude tax from the displayed
prices: When the check box is
enabled, the tax is excluded from the
displayed prices.
In the Currencies section, the following options are available:
7
1 2
3
4
1.Currency: Set of currencies in use

2.Exchange rate: A multiplier to convert default currency into secondary currency
3.Decimals: Number of decimals to be used
4.Default currency: Set in InnovaTint LAB, cant be changed.
5.Secondary currency: If in use, prices shown on screen are direct multiplies of default
currency.
6.Add: Add a new secondary currency
7.Delete: Delete selected secondary currency
Secondary currencies can be selected on the main screen, see page 16.
In the Hide/Show items section, the following options are available:
1 2
1.Available items: following items are possible to choose to be displayed in the info panel.
Base cost = BCOST if available, or BCOSTL * Base volume
Base price = BPRICE if available, or Base cost / (1-BMARGIN)
Base margin = Base price Base cost
Colorant cost = CCOST * Colorant volume
Colorant price = CCOST * Colorant volume / (1- CMARGIN)
Tinting service price = Tinting fee (fixed amount)
Total colorant price = Total price of all colorants in formula
Cost = Base cost + colorant cost
List price = Base price + Price of tinting
Discount = -Discount rate * List price
Price = List price + Discount (Note: discount 0
Margin = Price cost
Maximum retail price = maximum retail price (only visible on Info window if MRP set for
the selected product/base/can)
Tax = Tax-inclusive prices are generally the above multiplied by (1 + TAX). If rounding is
enabled, it is applied to the tax-inclusive price, and the price before tax, and margin, are
calculated backwards from them.
Total volume = Total volume of tinted paint
Total weight = Total mass of tinted paint
Price per liter = Price / Total volume of tinted paint
Price per kg = Price / Total mass of tinted paint
2.Selected items: Items that has been selected to the Info panel
NOTE: Items may be moved from box to another by dragging them to the desired place. Shown
items has an option to arrange items any order, whereas Available items shows them always
alphabetical order to ease up finding.
NOTE: If MRP is set and the above calculations would make List price including tax greater than
MRP, List price is set to MRP and Margin is adjusted accordingly.
In the Print configuration for prices section is visible only if Anylabel label format in use, the
following options are available:
1.PRICE 1: Item 1 to be printed into the label. Choices are listed below.
2.PRICE 2: Item 2 to be printed into the label. Choices are listed below.
3.PRICE 3: Item 3 to be printed. into the label. Choices are listed below.
Available choices:
-Base cost
-Base price
-Base margin
-Colorant cost
-Colorant price
-Tinting service price
-Total colorant price
-Cost
-List price
-Discount
-Price
-Margin
-Tax
-Total volume
-Total weight
-Price per litre
-Price per kg
-Price group
5.6. Dispenser information and commands
In the Dispenser information and commands section of the Tools and settings page, it is
possible to run a command for the tinting machine. This section is active only, if the Corob tinting
machine is in use or a UDCP connection to the tinting machine has been established (limited
features available).
1.Dispenser model: This is defined in

1
the CorobTech 5.5 program (display
only).
2.Dispenser commands: These
2 3 commands depend on the model of the
dispenser. Possible options: reset,
initialization, punching, recirculation.
3.RUN: The button to execute a
dispenser command.
On the Dispenser information and commands > MORE page, it is possible to view general
dispenser information, view the hardware error log, and run dispenser commands. On the page,
there are four different sections: (1) Dispenser general information, (2) Hardware errors, (3)
Dispenser commands, and (4) Purge settings.
1 3
4
In the Dispenser general information section, the following options are available:
1.Dispenser model: This is defined in
the CorobTech 5.5 program (display
only). In case of Corob Flex5xx-series,
1 dispenser model is UDCP dispenser.
2
2.Enable check on can change: If
3
the dispensing machine is equipped
with the sensor for the paint can
movement, enabling this option will
check if the paint can has been
4 removed after dispensing. If the paint
can has not been removed from the
dispensing machine the following
5 warning message is displayed:
warning the last dispensed can has
not been removed
3.Minimum colorant quantity that
can be dispensed: Sets the smallest
quality to be dispensed in milliliters.
This value will prevent dispensing of
too small amounts.
4.Enable dispense with weight
check: When the check box is enabled,
the tinting equipment will dispense the
colorants one by one, and after each
colorant has been dispensed the
dispensed amount is checked with a
scale. Also the scale configuration
button is activated.
5.Scale configuration: The button to
configure a scale. This option is active
only if Enable dispense with weight
check (4) check box is enabled.
When the Scale configuration button has been clicked, the following window appears. The
following options are available:
1.Scale model: The drop down list to
1 select a scale model.
2 2.Scale port: The drop down list to

select the port to which the scale is to
3
be attached.
3.No.of weighting attempts: The
selector field to set the number of
4
attempts made.
4.Relative standard deviation max
limit: The selector field to set the
5 maximum allowed error during
weighing.
5.Communication settings: These
settings are dependent on the scale
type used. Please refer to the scales
6 manual for the correct settings.
Parity
Stop bits
Data bits
Timeout
Bit per second
6.Flow control: Hardware / Software.
In the Hardware errors section, the following options are available:

1.Hardware errors: If the dispensing
machine displays an error, error codes
are listed in this table with descriptions
and object numbers. This information
1
can be given to the service personnel.
2.Clear: The button to clear the error
log.
On the Dispenser commands section, the following options are available:

1.Select command: The radio button
1 and the drop down list to select a
general command. These commands
depend on the model of the dispenser.
2 Possible options are: reset,
initialization and country specific
3
commands.
2.Select purge: The radio button and
the drop down list to select a purge
4 and purge type. The purge sequence
5 6 can be selected to be either done via:
Parallel = Purge all canisters at the
same time
Sequential = Purge every canister
separately
Canister = Purge only a single canister
3.Quantity: The volume of purge in
milliliters
4.Canister: The canister number on
which the purge will be done (valid
only when the canister is selected in
item (2).
5.Autocap: The automatic cap
placement on top of the dispensing
nozzles. Options are:
- Open the dispensing nozzles are left
uncovered.
- Closed The automatic cap covers the
dispensing nozzles and prevents the
nozzles from drying.
6.Automatic shelf: The automatic
shelf repositioning after tinting.
Options:
- Move up after dispensing the shelf
moves up
- Move down after dispensing the
shelf moves down
- Move to mm after dispensing the
shelf moves to a predefined position.
In the Purge options section, the following options are available:
1 2
1.Configure purge: To configure purge options.

2.Purge statistics: to view purge statistics.
When the configure purge has been clicked following window appears. The following options are
available:
1.Purge options: To setup basic purge functionalities

2.Purge manager: to setup detailed purge rules
In the Purge options section, the following options are available:
6
1 4
2
5
1.At program startup: When the check box is enabled, the purge is done every time when
the program is started.
2.At: When the check box is enabled the purge request is made at the selected hour in the
related box (e.g. 08:36).
3.Every: When the check box is enabled the purge request is made after the number of
minutes that are indicated in the related box (e.g. every 20 minutes).
4.Is skippable: When the check box is enabled, the purge can be aborted from the pop-up
window.
5.Sequential: When the check box is enabled, the colorants are dispensed circuit after
circuit, otherwise colorants are dispensed simultaneously. This option is available only for the
fixed purge.
6.Default settings: The button to reset all changes.
In the Purge manager section, the following options are available:
2 3 4
1.Fixed purge/Automatic purge: It is possible to select either a Fixed purge or an

automatic purge.
When the Fixed purge radio button is selected it is possible to configure a specific quantity
to be purged, for every circuit of the dispenser. The client application (es: CPSDriver)
decides when to purge the amounts.
When the Automatic purge radio button is selected, it is possible to configure the behavior
of the purge operation and decide when and what circuit is to be purged (following the
planned rules).
2.CIRCUIT: The number of circuits in the dispenser.
3.COLORANT: The colorant code with the RGB representation of it.
4.QUANTITY: The volume to be used when purging each colorant (circuit).
5.Save: The button to save all of the settings, and close the window.
In the Purge manager section when the Automatic purge option has been selected (1), the
additional options become available:
1
2
2.Advanced settings: This is an extension to the Advanced purge in that it allows the
possibility to configure the purge behavior in more detail, so that the automatic purge
operation becomes more efficient. See further details about this option on the next page.
3.INTERVAL: The time interval in hour/minutes (h:m) in which the purge is executed.
In the Purge manager section when the Automatic purge option has been selected, and the
Advance settings check box enabled, then additional options become available:
1 2
1.CUMULATIVE QTY: The default value for this column is 0.0. A different value means that
if the Interval period specifies that the sum of all quantities dispensed for that colorant is
higher than the value set in the Cumulative Quantity field, then no purge is needed.
Otherwise, a purge is required and the quantity to be dispensed is the result of the difference
between the set quantity in the cumulative rule and the quantity dispensed in the elapsed
time (Quantity field).
2.SEQ TRESHOLD: The default value for this column is 0.0, and is the quantity expressed in
milliliters after which the purge will be performed sequentially.
When the purge statistics has been clicked following window appears. The following options are
available:
3
4
1
2
1.Overview: Overview shows table view of all the colorants and their purge history within
the selected time interval.
2.Detail: Detail view allows to monitor individual colorant purge history
3.Time interval: to set the analyze period
4.Export: to export selected information
5.Close: to close the view
When the Detail-tab has been selected following view will be displayed.
1 2
3 4
1.Colorant: Colorant under the evaluation

2.Purged amount (ml): Total purged amount within the given time frame
3.Date: Date and time of individual purges
4.Purged amount (ml): Amount of purge
6. Product info
On the PRODUCT INFO tab page it is possible to view the product info for products in use. Access
can be made by clicking on the PRODUCT INFO text on the right hand side of the screen, or by
clicking on the F5 function button on the keyboard.
Product info
tab page
This functionality is set up in the InnovaTint LAB software.

7. History
On the HISTORY tab page, it is possible to view tinting history as well as re-tint previously
dispensed orders. Access can be made by clicking on the HISTORY text at the bottom of the
screen, or by clicking on the F6 function button on the keyboard.
History
tab page
The history tab page has two views: Orders and Customers.
Orders
Customers
7.1. Orders view

Here it is possible to view the whole list of dispensed orders, or then use the following options to
narrow the search result:
2
1 7
5 6
3 4
1.Search: The text field to filter the search results. In this field it is possible to search by the
color code, color name, product code, product name, or by base code. The results table can be
sorted by clicking on the column header.
2. From and To: The date fields to specify certain period of time to use as filter criteria. See the
next page for further instructions about this function.
3.Custom formulas only: When the check box is enabled the search is limited to only custom
formulas.
4.Local orders only: When the check box is enabled the search is limited to only orders within
the local database.
5.Reset fields: The button to reset all selections.
6.Export: The button to save the search result into a text file.
7. The button to exit this view.

1
To select the time period as a search
criteria:
1.Click on the button.

2.Select the date from the window.
2
When an order has been selected an order, it is possible to:
1 2
1.Tint again the same order.

2.Use this order as a template.
7.2. Customers view
On the Customers view it is possible to see all custom formulas that have been dispensed.
4 5
1
2 3
1.Search the customer by name.

2.View: To view the dispensing history of a customer.
3.Delete: Delete an item within the list (visible only if customer doesnt have any orders).
4.View only active customers: When the check box is enabled, only the customers with at
least one order made are displayed in the list.
5.Export: The button to save the list into the text file.
When the View buttons has been clicked:
5
7
1
3 4
1.Search order by name, code, date, etc.

2.Select order.
When an order is selected:
3.Tint again the same order.
4.Use this order as a template.
5.View the formula details.
6.Go back to the previous window.
7.Go back to the main page.
8. Bar code driven tinting

Bar codes can be used to operate the InnovaTint software. With the bar code function it is
possible to select the base paint, the color, create a new order and finally dispense the colorants
into the paint can.
This functionality is set up in the InnovaTint LAB software. The flow chart on the next page
illustrates the bar code driven tinting process.
9. APPENDIX 1
Base paint
Base paint is paint or other resin intended to be tinted using colorants. A product may be available
as different base paints, designated with codes. In the InnovaTint window the base paint code is
shown below the product name.
Can size
Examples of can sizes for paint:
250ml ( 0,25 l )
1 000ml (1l)
3 000ml (3l)
10 000ml ( 10 l )
20 000ml ( 20 l )
The tinting system and the dispensing machine will determine the can sizes to be used.
Color codes
A Color code is a string of letters and numbers, e.g. RAL 3000, utilized by the InnovaTint program
to identify each color and to find the formula in the formula database.
Colorant
Colorants are stable pigment concentrates whose color, color strength and rheology are
controlled. They are manufactured according to rigid specifications, which guarantee the high
Color accuracy time after time.
Dispensing unit
In a dispensing machine the volume of colorant to be dispensed is usually defined in dispensing
units or in milliliter (ml). The unit to be used is defined by the tinting system and the dispensing
machine. Typically the unit is a form of fluid ounce divided into a set of fractions.
Formula
A formula in the InnovaTint program contains the following information:
Color Code (the color can also have a name(s))
Base paint code
Colorant code and volume.
A formula can have a maximum of 8 different colorants displayed at same time
Formula database
All Color formulas are stored in the main database. The InnovaTint program will automatically
group the formulae according to various criteria.
Basic formulae: This group contains the formulae delivered with the program package, and they
are stored into the Main database. It is not possible to edit these formulae
Users formulae: This is the group in which the customers own Color formulas are stored via a
local database. These formulae can only be searched via the History tab
Product
In InnovaTint, a product typically means a brand of paint. See also Base paint.
10. APPENDIX 2
Supported spectrophotometers for InnovaTint
BYK-Gardner Spectro Guide (45/0) Datacolor Textflash 3880

BYK-Gardner Spectro Guide (d/8) Datacolor Textflash 3881
Chroma Sensor 3 (45/0) Datacolor 3890
Chroma Sensor 3 (d/8) Datacolor Uniflash
Chroma Sensor 45 Dataflash 100
Chroma Sensor 5 Dataflash 110
Datacolor 110 Dataflash 2000
Datacolor 110P Dataflash 250 RS
Datacolor 245 Dataflash 80
Datacolor 400 HunterLab LabScan XE
Datacolor 550 HunterLab UltraScan XE
Datacolor 600 Macbeth 2020
Datacolor 650 Macbeth 2020+
Datacolor CHECK Macbeth 2025
Datacolor Elrepho MACBETH COLOR-EYE 2145
Datacolor Elrepho 3000 MACBETH COLOR-EYE 3000
Datacolor Elrepho 450 MACBETH COLOR-EYE 7000
Datacolor M2009 MACBETH COLOR-EYE 7000A
Datacolor Mercury MCS500: DC/Zeiss 45
Datacolor Microflash 200d Minolta CM-3700d
Datacolor Microflash 45 IR Minolta CM-503c
Datacolor Microflash 45 Minolta CM-503i
Datacolor Mixflash Minolta CM-508c
Datacolor Simulus 2000 ++ Minolta CM-508d
Datacolor Spectraflash 300 Minolta CM-508i
Datacolor Spectraflash 300uv Minolta CM-512 m3
Datacolor Spectraflash 350-X Minolta CM-525i
Datacolor Spectraflash 450 X-Rite CF57
Datacolor Spectraflash 450-X X-Rite CF58
Datacolor Spectraflash 500 X-Rite CFS58
Datacolor Spectraflash 600 X-Rite CFS57
Datacolor Spectraflash 600+ X Rite Ci51/Ci52
Datacolor Spectraflash 600-X X-Rite Color i7
Datacolor Spectraflash 650-X X-Rite RM400
Datacolor Textflash 2000
11. APPENDIX 3
The language options in the InnovaTint program.
Bulgarian
Chinese simplified
Chinese traditional
Croatian
Czech
Danish
Dutch
English (American English)
English_UK (UK English)
Finnish
French
German
Greek
Hebrew
Hungarian
Indonesian
Italian
Japanese
Korean
Malesian
Norwegian
Polish
Portuguese
Romanian
Russian
Serbian
Slovak
Spanish
Swedish
Thai
Turkish
Vietnamese
12. APPENDIX 4
-
EasyPrint
(version 0.2.4)
User Manual
From:
Chromaflo Technologies
Vernissakatu 1
P.O. Box 42
System Support:
Tel. +358 207 188 000
Fax. + 358 207 188 020
General
COPYRIGHT 2010, Chromaflo Technologies. - All rights reserved in all countries. No part of this
material may be translated into any other languages and/or adapted and/or reproduced in any
form, or by any means, electronic or mechanical, including but not limited to photocopying and
recording, without prior written permission of Chromaflo Technologies.
Information in this manual is subject to change without notice and does not represent a
commitment on the part of Chromaflo. Any reference to companies, names, dates and addresses
used in the screens and/or examples is purely accidental, unless otherwise stated, and is intended
solely to clarify use of the Chromaflo Technologies products.
Chromaflo shall not be liable for technical or editorial errors or omissions made herein; nor for
incidental or consequential damages resulting from the performance or use of this material.
The names of the products used might be trademarks or registered trademarks of their respective
companies.
(Reference software version EasyPrint 0.2.4)

Introduction
EasyPrint software add-on replaces previous Anylabel labelling software. It is used to make and edit new labels
within InnovaTint software family. Main functionalities of the software are;
Label creation and design (any size)

Label edits
Retrieve order information from the database
Place picture(s) to the label
Create barcodes, including 2D and QR codes, and define their content
Navigation in the software

Navigation in the software is divided to three areas; main header for content design and appearance.
1 2 3 4 5 6 7 8
1. Label options; Create, Edit, Save and Preview
2. Font options; font type, size, bold, italic and underlined
3. Font characteristics; font color and background color
4. Text alignment; left, middle and right
5. Text alignment; top, centre and bottom
6. Add line; top, bottom, left and right
7. Add line; surround component and clear component line properties
8. Set component order; move front and back

Left side to select item type, see Available item types for more details.
1. Select item
2. Zoom
3. Add Text-component
4. Add picture
5. Add line
6. Add rectangle
7. Add circle / eclipse
8. Add barcode
9. Add 2D barcode
And right side to define content to the item and its details.
Icons on the screen come with tool tips that is shown, if mouse pointer kept over the icon. The same is true also
for Text system variables to display example cases of their use, see custom text / system variable.
Getting started
New label
A new label can be created at the program start up
or alternatively by clicking -icon on the header row or select new from the dropdown menu.
Possible settings for the label are:
4 5
1. Label size selection. EasyPrint has multiple preconfigured label sizes to choose from. It is also
possible to create custom size. Width and height must be given.
2. Set the label orientation
3. Set margins
4. OK to approve new label format
5. Cancel to open EasyPrint software without preset label canvas
When a new label is created possible content items can be moved into the canvas and label can be
designed into its final format. See more information on the available item types -section.
Label size and margin can always be adjusted on the right side panel under the page settings.
Edit label
To edit a label click on -icon or alternatively select Open from the dropdown menu.
A window will be displayed where to choose from available templates
*.ept files (EasyPrint templates) are by default saved under c:\wuser\easyprint\templates.
Select template and click open. Template will be opened for EasyPrint to be edited.
Save label
New or edited labels can be saved by clicking icon or alternatively select Save or Save as
from the dropdown menu.
Save will overwrite previous version (if editing) and Save as allows to rename edited version. In
both cases default location for the label is c:\wuser\easyprint\templates.
Preview label
To preview label click on -icon or alternatively select Show preview from the dropdown
menu.
A new window will be opened where data content fields are populated as they would be in real
print (demonstrational data used).
data design view:
preview mode:
Preview window has following options
1
2
1. Print the preview

2. Zoom the object
3. Close the preview window
Available item types

Select tool
Select tool, , is used to select an item from the label in order to modify its content or to
change location in the canvas. Item detail dropbox (1) or Tab-button can also be used to navigate
through the items.
Depending on the selection of the item, different type of information is shown on the right side on
the Item details section.
2. Set size defines the size of the component

3. Position the location of the item in the label (top left corner)
both of these are always present to each item types
All item, when selected, can be moved around the canvas with mouse by clicking it and dragging it
to its new location. Likewise its possible to reset their size by extending/shrinking the area of the
component. Any change made are effected to above size and position values.
Zoom
Zoom tool, , is used to zoom in and out. Mouse left click zooms in and right click out.
Add text
Text component is added to the label by clicking -icon and placing it to the canvas.
Area within the blue rectangles is reserved to display the content.

Custom text / system variable
Text can be custom text or a system variable component to collect data from the database.
Use radio -button to select the type of content.
1. To create static text to the label select custom text. Type in custom value.
2. To collect data from the database select system variable.
System variables are grouped into logical sets that present the area of need to easier find needed
data variable. Possible options for group are:
Date and times
Extra info
Formula
InnovaTint Lab
Order info
Prices (default currency)
Prices (selected currency)
Site info
Date and times

Variable from Data and times displays Date and/or time in its short format as set in Windows
regional settings. Possible options are;
Current date [currentDate] 19.12.2012

Current date + time [currentDateTime] 19.12.2012 12:12
Current time [currentTime] 12:12
,where info on brackets is the name of function as displayed on the designer canvas. Values on
quotation marks are examples of the outcome.
Extra info
Variable from Extra info displays additional information related to the order. Price group info
can only be shown, if in InnovaTint Lab mentioned function has been set to use. Possible
options are;
Price group [EIPriceGroup] 2

Total mass [EITotalMass] 1234,34 g
Total volume [EITotalVolume] 1000,23 ml
Formula
Variable for the Formula displayes information related to the formula used in the order. Possible
options are:
Formula cnts codes [formulacolorants] RT, TT, VT where each colorant is on its own
row
Formula cnts volumes (currently selected unit) [FormulaSelectedVolumes] 12/96,
41/96, 15/96 where each amount is on its own row. /96 in this example presents
temporarily selected unit in use.
Formula cnts volumes (default unit) [FormulaDefaultVolumes] 12/96, 41/96, 15/96
where each amount is on its own row. /96 is the default unit set in InnovaTint POS
version.
Formula cnts volumes (ml) [FormulaMlVolumes] 0,12, 0,13, 0,14 where each
amount is in mls and on its own rowFormula note [FormulaNote] low hiding
Formula volumes unit (currently selected) [formulaSelectedUnit] /96
Formula volumes unit (default) [formulaDefaultUnit] /192
Formula volumes unit (ml) [formulaMlUnit] ml
Formula weighting (volumes from db) [formulaCCsFromDb] 1, 2, 3 where each
amount is on its own row
Formula weighting (volumes from scale) [formulaCCsFromScale] 1, 2, 3 where each
Formula weighting (weights from db) [formulaWeightsFromDb] 1, 2, 3 where each
Formula weighting (weights from scale) [formulaWeightsFromScale] 1, 2, 3 where
each amount is on its own row
InnovaTint Lab
InnovaTint Lab variables are designed to support InnovaTint Lab matching and charaterization
features. Possible options are:
Characterization set component [charsetCMP]

Characterization set components [charsetSampleComponents]
Characterization set formula volumes (proposed amount of component)
[charsetCMPpro]
Characterization set formula volumes (true specific gravity for sample) [charsetCMPsg]
Characterization set name [chasetName]
Characterization set sample name [charsetSampleName]
Characterization set volumes (actual amount of component) [charsetCMPam]
Color HTML [colorHTML]
Color LAB [colorLAB]
Color XYZ [colorXYZ]
Sample made by [madeBy]
Sample thickness [thickness]
VOC components [formulaVOCcontent]
VOC total [formulaVOC]
Order info
Order info variables are related items in the order and customer. Possible options are:
Base code [baseCode] White

Can actual / total [canIDLot] 2/4
Can actual number [canID] 3
Can name [canName] 4 litre
Cans total number [canTotal] 10
Colour code [colourCode] Spirit 1-2-3
Colour name [colourName] Blue velvet
Customer name [customerName] John Doe
Date of Order [modificationDate] 18.12.2012 14:20
Date of order creation [creationDate] 17.12.2012 12:12
Order ID [orderID] 100202
Product name [productName] Exterior Latex
User notes [UserNote] Living room ceiling
Prices (default currency)

Default currency prices variables uses currency and values set for the zone in use. See LAB
manual for the calculation models. Possible options are:
Base cost (default) [EIPDBaseCost] 20

Base margin (default) [EIPDBaseMargin] 5
Base price (default) [EIPDBasePrice] 25
Colorant cost (default) [EIPDCntCost] 1
Colorant margin (default) [EIPDCntMargin] 0,1
Colorant price (default) [EIPDCntPrice] 1,1
Cost (default) [EIPDCost] 21
Discount (default) [EIPDDiscount] 0
List price (default) [EIPDListPrice] 26,1
Margin (default) [EIPDMargin] 5,1
Maximum retail price (default) [EIPDMaxPrice]
Price (default) [EIPDPrice] 26,1
Price per kg (default) [EIPDPricePerKilogram] 26,1
Price per litre (defaul) [EIPDPricePerLitre] 28,0
Tax (default) [EIPDTax] 2
Tint fee (default) [EIPDTintFee] 0,3
Tint price (default) [EIPDTintPrice] 1,4
Prices (selected currency)

Selected currency prices variables uses alternative currency and its conversion rate as set in
POS. Shown values are conversions and may cause inaccuracies. Possible options are:
Base cost (selected) [EIPSBaseCost] 20

Base margin (selected) [EIPSBaseMargin] 5
Base price (selected) [EIPSBasePrice] 25
Colorant cost (selected) [EIPSCntCost] 1
Colorant margin (selected) [EIPSCntMargin] 0,1
Colorant price (selected) [EIPSCntPrice] 1,1
Cost (selected) [EIPSCost] 21
Discount (selected) [EIPSDiscount] 0
List price (selected) [EIPSListPrice] 26,1
Margin (selected) [EIPSMargin] 5,1
Maximum retail price (selected) [EIPSMaxPrice]
Price (selected) [EIPSPrice] 26,1
Price per kg (selected) [EIPSPricePerKilogram] 26,1
Price per litre (selected) [EIPSPricePerLitre] 28,0
Tax (selected) [EIPSTax] 2
Tint fee (selected) [EIPSTintFee] 0,3
Tint price (selected) [EIPSTintPrice] 1,4
,where info on brackets is the name of function as displayed on the designer canvas. Values on quotation marks
are examples of the outcome.
Site info
Site info variable displayes infromation about the store. Possible options are:
Company name [companyName] Retailer ABC

Site address 1 [address1] Paint street 1
Site address 2 [address2] City2
Site country [country] Finland
Site email [email] [email protected]
Site name [siteName] local site
Site phone [phone] +358 123 123
Site post code [postCode] 12312
Text formatting
Text format, font type, size, color, can be set in header line settings (see section 2) or using
item details options.
1. Set the font

2. Set the font size
3. Font color
4. Background color for the text
5. Should the background be transparent
6. Font format
7. Horizontal alignment, left, centre, right
8. Vertical alignment, top. middle, bottom
9. Border options, line color. width and orientations.
Add picture
Click on the -icon to add picture to the canvas. A new window will be opened to define
location where to find needed picture.
Supported picture formats are .jpg, .bmp and .png.

Place the picture to its location.
Following options are available to control picture items
1. Location for the picture

2. How to treat picture if the area reserved for it doesnt match the picture aspect ratio. If off,
picture is scaled to fit whole area.
Add line
Click on the -icon to add a line to the canvas. Following options are available to control line
properties.
1. Set line color

2. Set line width
Add rectangle
Click on the icon to add a rectangle to the canvas. Following options are available to
control rectangle properties.
1. Set fill color and transparent

2. Set line color
3. Set line width
4. Set radius for the corners.
Add circle / eclipse
Click on the icon to add a circle or eclipse to the canvas. Following options are available to
control circle properties.
1. Set fill color and transparent

2. Set line color
3. Set line width
Add barcode
Click on the icon to add barcode to the canvas. Following options are available to control
circle properties.
1. Type of information to be set into the barcode. Options are:

Base cost barcode (type EAN13/UPC)
Base margin barcode (type EAN13/UPC)
Base price barcode (type EAN13/UPC)
Color barcode (type Code39)
Colorant cost barcode (type EAN13/UPC)
Colorant margin barcode (type EAN13/UPC)
Colorant price barcode (type EAN13/UPC)
Cost barcode (type EAN13/UPC)
Discount barcode (type EAN13/UPC)
List price barcode (type EAN13/UPC)
Margin barcode (type EAN13/UPC)
Maximum retail price (type EAN13/UPC)
Order barcode (type Code39)
Price barcode (type EAN13/UPC)
Price group barcode (type EAN13/UPC)
Price per kg barcode (type EAN13/UPC)
Price per litre barcode (type EAN13/UPC)
Tax barcode (type EAN13/UPC)
Tint fee barcode (type EAN13/UPC)
Tint price barcode (type EAN13/UPC)
2. Barcode prefix gives an option to pinpoint barcode type to one used in cashier system.
EAN/UPC barcode consist four distinct areas

prefix (links the item to cashier system) 2303222
zero padding (fills the empty space of the others) 000
encoded price (price coming from the database) 89
checksum 5
2 303222 000895
If prefix is started with zero 0, created barcode is compatible with UPC-based coding.
3. Show label adds barcode label into the barcode, see below picture.
Add 2D barcode
Click on the icon to add barcode to the canvas. Following options are available to control
circle properties.
1. Type of information to be set into the barcode. Options are:

Color barcode
Order identificator
2. Type of 2D barcode, options are:
Data Matrix Ecc 200
QR Code
QR Data Matrix
3. Show quite zone add empty margins around the barcode.

13. APPENDIX 5
InnovaTint reception options
InnovaTint has option to accept remote orders using flink protocol. The remote software has to use compatible
flink format file and the databases have to match (colorant codes, product names, base codes, can names).
The correct structure of flink file looks like this (some lines are optional, please read more about Flink protocol in
definition of this protocol):
@RUN
@PRD "SOLVENT PRODUCT" "BRITISH STANDARD 4800"
@WGH 0
@UNT 31.2460 96.0000
@CLR "BS 02 C 39"
@CAN "5000 ml" 5000.0000
@LQT 1
@CNT "MS" 0.001 "KU" 40 "BS" 20
@FRM "MS,0.001,KU,40,BS,20" 1000.0000
@END
@RUN
Start of session
@PRD "SOLVENT PRODUCT" "BRITISH STANDARD 4800"
"SOLVENT PRODUCT" Product name
"BRITISH STANDARD 4800" Subproduct name (optional)
@WGH 0
Definition of weight / volume dispensing
@UNT 31.2460 96.0000
Unit definition (optional)
31.2460 metering unit
96.0000 fraction unit
@CLR "BS 02 C 39"
"BS 02 C 39" color code
@CAN "5000 ml" 5000.0000
"5000 ml" name of can
5000.0000 nominal quantity of can (optional)
@LQT 1
Lot quantity (optional)
1 number of packages
@CNT "MS" 0.001 "KU" 40 "BS" 20
Formula definition
"MS" 0.001 "KU" 40 "BS" 20 list of colorants and volumes
@FRM "MS,0.001,KU,40,BS,20" 1000.0000
Second option of formula definition
"MS,0.001,KU,40,BS,20" formula in different format cnt codes or Ids and volumes
1000.0000 formula volume
@END
End of session
InnovaTint comes with two build in tools, that can modify flink file and allow to process files, that contains for
example not matching product names, base codes, can names etc., but completely different structure. Both tools
are configured and enabled by creating configuration files.
Flink translation file

Path to configuration file:
C:\wuser\InnovaTint\wflink_translation.ini
Description of tool:
This tools allows to translate the entered names and codes. It is very useful, when for example name of
products, bases, cans etc. doesnt match in InnovaTint and other software. It doesnt alter the structure
of file (commands have to match the with example above)
Structure of configuration file:
File consists of sections: each section is first tag of flink file inside set of square brackets, for example:
[@PRD], [@BAS], [@CAN], [@FRM],
In the sections you can use unlimited number of translation rules, one rule is one line in section. Rule
consists of one or more strings to be translated to one or more other strings.
The section of old string and new string is separated by equal sign =, when there is set of strings, then
they are separated by vertical bar |. The number of sets can be different (one of old string can be
rewritten to two etc.).
Examples:
Base C=C
@BAS "Base C" is translated to @BAS "C"
Product with very long name AABC=Product AABC

@PRD "Product with very long name AABC" is translated to @PRD "Product AABC"
Product 1|Subproduct AABC=Product 1 AABC

@PRD "Product 1" "Subproduct AABC" is translated to @PRD "Product 1 AABC"
Subproduct AABC=AABC
@PRD "Product 1" "Subproduct AABC" is translated to @PRD "Product 1" "AABC"
Example of whole wflink_translation.ini file
[@PRD]
CPS Matching Exterior 2401 AABC=Exterior 2401 AABC
CPS Matching Exterior 2401 AAC=Exterior 2401 AAC
CPS Matching Interior 2401 AABC=Interior 2401 AABC
CPS Matching Interior 2401 AAC=Interior 2401 AAC
[@BAS]
CPS BASE AA=AA
CPS BASE B=B
CPS BASE C=C
[@CAN]
CAN 1 l=1 l
CAN 4 l=4 l
10=10 l
Flink file received:
@RUN
@PRD "CPS Matching Exterior 2401 AAC"
@UNT 1 1
@CLR "ASF 1011"
@CNT "FT" 9.85666634515 "MM" 8 "TT" 16.0170827061 "VT"
7.39249996841 "XT" 26.4897912741
@LQT 1
@BAS "CPS BASE C" 900
@CAN "CAN 1 l" 1000
@FRM 1000
@END
Flink file translated:
@RUN
@PRD "Exterior 2401 AAC"
@UNT 1 1
@CLR "ASF 1011"
@CNT "FT" 9.85666634515 "MM" 8 "TT" 16.0170827061 "VT"
7.39249996841 "XT" 26.4897912741
@LQT 1
@BAS " C" 900
@CAN "1 l" 1000
@FRM 1000
@END
Flink rewrite tool
Path to configuration file:
C:\wuser\InnovaTint\ wflink_rewrite.ini
Description of tool:
This tool modifies the structure of flink file. It allows using InnovaTint flink order reception even if the
second software is using completely different structure of flink file. It works in a way, that it parses
received flink file by template and then formats parsed data to valid structure of InnovaTint reception
flink file.
Structure of configuration file:
The configuration file is in fact flink file, but instead of values, there are variable, that identifies values.
Here is list of possible variables:
$PRODUCT$
$SUBPRODUCT$
$WEIGHT$
$UNIT$
$FRACTION$
$COLOR$
$GDATA$
$FORMULA$
$FORMULA_AMOUNT$
$FORMULA_WEIGHT$
$CAN$
$CAN_AMOUNT$
$CAN_WEIGHT$
$BASE$
$BASE_AMOUNT$
$BASE_WEIGHT$
$BARCODE$
$LOT_SIZE$
$CNT_ALL$
$CNT_CODE[x]$
$CNT_AMOUNT[x]$
$REFILL_ALL$
$REFILL_AMOUNT[x]$
The most of values are single variables, but there are also arrays ($CNT_CODE[x]$, $CNT_CODE[x]$,
$CNT_AMOUNT[x]$), that needs to identify the key of array. You can select if you want to use arrays or
you can use variable ending by _ALL. This means, that parser read everything from the actual position
of line till the end of line.
Example of single lines
@UNIT $UNIT$ $FRACTION$ $WEIGHT$
Received line
@UNIT 31.2460 96 1
Is rewritten to
@UNT 31.2460 96
@WGH 1
@FORMULA $COLOR$ $PRODUCT$ $BASE$ $CAN$ $CNT_ALL$
Received line
@FORMULA "BS 02 C 39" "Exterior 2401 AAC" "C" "5 l" "MS" 0.001
"KU" 40 "BS" 20
Is rewritten to
@CLR "BS 02 C 39"
@PRD "Exterior 2401 AAC"
@BAS "C"
@CAN "5 l"
@CNT "MS" 0.001 "KU" 40 "BS" 20
@CNT_CODES $CNT_CODE[1]$ $CNT_CODE[2]$ $CNT_CODE[3]$ $CNT_CODE[4]$
$CNT_CODE[5]$ $CNT_CODE[6]$ ...
@CNT_VOLUMES $CNT_ AMOUNT [1]$ $CNT_ AMOUNT [2]$ $CNT_ AMOUNT [3]$
$CNT_ AMOUNT [4]$ $CNT_ AMOUNT [5]$ $CNT_ AMOUNT [6]$ ...
Received lines
@CNT_CODES "MS" "KU" "BS"
@CNT_VOLUMES 0.001 40 20
Are rewritten to
@CNT "MS" 0.001 "KU" 40 "BS" 20
Examples of whole wflink_rewrite.ini file
Example of rewrite template:
@BEGIN
@KLEUR $COLOR$
@EENHEID $UNIT$ $FRACTION$ $WEIGHT$
@GOEDEREN $PRODUCT$ $BASE$ $BASE_AMOUNT$ $CAN$ $CAN_AMOUNT$
@KLEURSTOF $CNT_ALL$
@PAKKET $LOT_SIZE$
@EIND
Valid flink file to be rewritten
@BEGIN
@EENHEID 1 1 0
@PAKKET 10
@KLEURSTOF "FT" 9.85666634515 "TT" 16.0170827061 "VT"
7.39249996841 "XT" 26.4897912741
@GOEDEREN "Exterior 2401 AABC" "C" 900 "1 l" 1000
@KLEUR "ASF 1011"
@EIND
Example of rewrite template:
@RUN
@CLR $COLOR$
@UNT $UNIT$ $FRACTION$
@FRM $FORMULA$ $BASE_AMOUNT$
@PRD $PRODUCT$ $SUBPRODUCT$
@BAS $BASE$
@CAN $CAN$
@END
Valid flink file to be rewritten
@RUN
@CLR "00NN 05/000"
@UNT 29.57 48.0
@FRM "FT,672.,LT,78.742" 3784
@PRD "Exterior 2401 AABC"
@BAS "AA"
@CAN "4 l" 4000
@END
Combination of translation and rewrite tools
Both tools can be used together, you only need to keep in your mind, the order, how are tools applied. First
is always translation done, then the rewrite.
Content of C:\wuser\InnovaTint\wflink_translation.ini file

[@PRODUCT]
CPS Matching Exterior 2401 AABC=Exterior 2401 AABC
CPS Matching Exterior 2401 AAC=Exterior 2401 AAC
CPS Matching Interior 2401 AABC=Interior 2401 AABC
CPS Matching Interior 2401 AAC=Interior 2401 AAC
[@BASE]
CPS BASE AA=AA
CPS BASE B=B
CPS BASE C=C
[@CAN]
CAN 1 l=1 l
CAN 4 l=4 l
10=10 l
Content of C:\wuser\InnovaTint\ wflink_rewrite.ini file
@RUN
@COLOR $COLOR$
@UNT $UNIT$ $FRACTION$
@FORMULA $FORMULA$ $BASE_AMOUNT$
@PRODUCT $PRODUCT$ $SUBPRODUCT$
@BASE $BASE$
@CAN $CAN$
@END
Flink file
@RUN
@COLOR "00NN 05/000"
@UNIT 29.57 48.0
@FORMULA "FT,672.,LT,78.742" 3784
@PRODUCT "CPS Matching Exterior 2401 AABC"
@BASE "CPS BASE AA"
@CAN "CAN 4 l" 4000
@END

Innovatint Ultimate Manual PDF

Uploaded by

Copyright:

Available Formats

Innovatint Ultimate Manual PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Innovatint Ultimate Manual PDF

Uploaded by

Copyright:

Available Formats

InnovaTint Ultimate | User Manual 1

1. WORKING WITH THE INNOVATINT ULTIMATE ............................................................................................................................... 4

7. HISTORY .................................................................................................................................................................................................... 105

9. APPENDIX 1............................................................................................................................................................................................... 112

10. APPENDIX 2 .......................................................................................................................................................................................... 114

11. APPENDIX 3 .......................................................................................................................................................................................... 115

12. APPENDIX 4 .......................................................................................................................................................................................... 116

13. APPENDIX 5 .......................................................................................................................................................................................... 141

(Reference software version 1.4.0 beta 6. 7.1.2013)

1. Working with the InnovaTint Ultimate

1.1. Starting InnovaTint

When starting the program, the nozzle purge operation appears.

1.OK: The button to start the purge.

Note: See further information about

1.2. Closing The InnovaTint program

When a pop-up window is displayed, it can be closed in two ways:

1.3. Software activation / deactivation

1.3.1. Software license activation with an on-line connection

2.Alternatively, during the trial period

3.License code: The text field for the

6.Activation completed text will

1.3.2. Software license activation without an on-line connection

2. Alternatively, during the trial period

3.INSTALLATION ID: The code

6.Activation complete text will appear

1.3.3. Software license deactivation with an on-line connection

1.Navigate to the activation screen in

2.BACK: The button to return to the

4.License code: The text field for the

7.The software license has been

1.3.4. Software license deactivation without an on-line connection

1.Navigate to the activation screen in

2.BACK: The button to return to the

4.License code: The text field for the

9.CONTINUE TRIAL PERIOD: (No

5.History tab 6.Notes area

The user interface is subdivided into the following main areas:

Banner Action buttons for

2.1. Order status

Possible orders statuses are:

2.2. Order list

Colorant level Show/Hide

Formula unit for

2.3. Order with waiting status

1. RETRY: The button to proceed with

2. OK: The button to start dispensing.

Note: The order status has a

If multiple cans are to be dispensed

Note: The order status has a

2.4. Order with done! status

2.5. Create a new order

The new order window has the following options:

Symbol for alternative

Symbol for primer

After clicking on the Clock symbol the

1 2.Use the slider to scroll to view other

After clicking on the Paint brush

2. OK: The button to start dispensing.

If multiple cans are to be dispensed