Scribd
Upload
859 views2 pages

Bore and Keyway Tolerance Table

The document provides standards for bore and keyway dimensions according to the ANSI/AGMA 9002-B04 standard. It lists nominal bore diameters from 3/8" to 2-5/8" and provides specifications for clearance bore, interference bore, keyway width, height and T-dimension. It notes that hub keyway depth is half the nominal key height and T-dimension is calculated from the bore diameter and keyway dimensions.

Uploaded by

434lap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
859 views2 pages

Bore and Keyway Tolerance Table

The document provides standards for bore and keyway dimensions according to the ANSI/AGMA 9002-B04 standard. It lists nominal bore diameters from 3/8" to 2-5/8" and provides specifications for clearance bore, interference bore, keyway width, height and T-dimension. It notes that hub keyway depth is half the nominal key height and T-dimension is calculated from the bore diameter and keyway dimensions.

Uploaded by

434lap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Engineering

U.S. Customary Inch / Clearance-fit and interference-fit Bore and


Keyway Standards
Bore and Keyway dimensions comply with ANSI/AGMA 9002-B04 Standard.

Clearance Bore Interference Bore Keyway


Nominal Bore +0.001/ -0.0005/ Width Height T-DIM
Diameter -0.000 Min. Max. -0.0010 Min. Max. +0.002/-0.000 (ref) +0.015/-0.000

3/8 0.3750 0.3750 0.3760 0.3750 0.3740 0.3745 0.0938 0.0469 0.421
7/16 0.4375 0.4375 0.4385 0.4375 0.4365 0.4370 0.0938 0.0469 0.484
1/2 0.5000 0.5000 0.5010 0.5000 0.4990 0.4995 0.1250 0.0625 0.560
9/16 0.5625 0.5625 0.5635 0.5625 0.5615 0.5620 0.1250 0.0625 0.623
5/8 0.6250 0.6250 0.6260 0.6250 0.6240 0.6245 0.1875 0.0938 0.709
11/16 0.6875 0.6875 0.6885 0.6875 0.6865 0.6870 0.1875 0.0938 0.773
3/4 0.7500 0.7500 0.7510 0.7500 0.7490 0.7495 0.1875 0.0938 0.837
13/16 0.8125 0.8125 0.8135 0.8125 0.8115 0.8120 0.1875 0.0938 0.900
7/8 0.8750 0.8750 0.8760 0.8750 0.8740 0.8745 0.1875 0.0938 0.964
15/16 0.9375 0.9375 0.9385 0.9375 0.9365 0.9370 0.2500 0.1250 1.051
1 1.0000 1.0000 1.0010 1.0000 0.9990 0.9995 0.2500 0.1250 1.114
1-1/16 1.0625 1.0625 1.0635 1.0625 1.0615 1.0620 0.2500 0.1250 1.178
1-1/8 1.1250 1.1250 1.1260 1.1250 1.1240 1.1245 0.2500 0.1250 1.241
1-3/16 1.1875 1.1875 1.1885 1.1875 1.1865 1.1870 0.2500 0.1250 1.304
1-1/4 1.2500 1.2500 1.2510 1.2500 1.2490 1.2495 0.2500 0.1250 1.367
1-5/16 1.3125 1.3125 1.3135 1.3125 1.3115 1.3120 0.3125 0.1562 1.455
1-3/8 1.3750 1.3750 1.3760 1.3750 1.3740 1.3745 0.3125 0.1562 1.518

Clearance Bore Interference Bore Keyway


Nominal Bore +0.001/ -0.0005/ Width Height T-DIM
Diameter -0.000 Min. Max. -0.0010 Min. Max. +0.0025/-0.0000 (ref) +0.015/-0.000

1-7/16 1.4375 1.4375 1.4385 1.4375 1.4365 1.4370 0.3750 0.1875 1.605
1-1/2 1.5000 1.5000 1.5010 1.5000 1.4990 1.4995 0.3750 0.1875 1.669

Clearance Bore Interference Bore Keyway


Nominal Bore +0.001/ -0.001/ Width Height T-DIM
Diameter -0.000 Min. Max. -0.002 Min. Max. +0.0025/-0.0000 (ref) +0.015/-0.000

1-9/16 1.5625 1.5625 1.5635 1.5625 1.5605 1.5615 0.3750 0.1875 1.732
1-5/8 1.6250 1.6250 1.6260 1.6250 1.6230 1.6240 0.3750 0.1875 1.796
1-11/16 1.6875 1.6875 1.6885 1.6875 1.6855 1.6865 0.3750 0.1875 1.859
1-3/4 1.7500 1.7500 1.7510 1.7500 1.7480 1.7490 0.3750 0.1875 1.922
1-13/16 1.8125 1.8125 1.8135 1.8125 1.8105 1.8115 0.5000 0.2500 2.032
1-7/8 1.8750 1.8750 1.8760 1.8750 1.8730 1.8740 0.5000 0.2500 2.096
1-15/16 1.9375 1.9375 1.9385 1.9375 1.9355 1.9365 0.5000 0.2500 2.160
2 2.0000 2.0000 2.0010 2.0000 1.9980 1.9990 0.5000 0.2500 2.223

Clearance Bore Interference Bore Keyway


Nominal Bore +0.0015/ -0.001/ Width Height T-DIM
Diameter -0.0000 Min. Max. -0.002 Min. Max. +0.0025/-0.0000 (ref) +0.015/-0.000

2-1/16 2.0625 2.0625 2.0640 2.0625 2.0605 2.0615 0.5000 0.2500 2.287
2-1/8 2.1250 2.1250 2.1265 2.1250 2.1230 2.1240 0.5000 0.2500 2.350
2-3/16 2.1875 2.1875 2.1890 2.1875 2.1855 2.1865 0.5000 0.2500 2.414
2-1/4 2.2500 2.2500 2.2515 2.2500 2.2480 2.2490 0.5000 0.2500 2.477

Note: Class 1 clearance fits assumed.


Engineering
U.S. Customary Inch / Clearance-fit and interference-fit Bore and
Keyway Standards
Bore and Keyway dimensions comply with ANSI/AGMA 9002-B04 Standard.

Clearance Bore Interference Bore Keyway


Nominal Bore +0.0015/ -0.001/ Width Height T-DIM
Diameter -0.0000 Min. Max. -0.002 Min. Max. +0.003/-0.000 (ref) +0.015/-0.000

2-5/16 2.3125 2.3125 2.3140 2.3125 2.3105 2.3115 0.6250 0.3125 2.587
2-3/8 2.3750 2.3750 2.3765 2.3750 2.3730 2.3740 0.6250 0.3125 2.651
2-7/16 2.4375 2.4375 2.4390 2.4375 2.4355 2.4365 0.6250 0.3125 2.714
2-1/2 2.5000 2.5000 2.5015 2.5000 2.4980 2.4990 0.6250 0.3125 2.778
2-9/16 2.5625 2.5625 2.5640 2.5625 2.5605 2.5615 0.6250 0.3125 2.841
2-5/8 2.6250 2.6250 2.6265 2.6250 2.6230 2.6240 0.6250 0.3125 2.905

Hub keyway depth is one-half the nominal height of the key and measured
from the side corner. The dimension from the top of the keyway to the opposite
bore side, T-dim, is calculated from (refer to ANSI/AGMA 9002-B04) the
following:

T = bore + (h kw - Ch)

Note: Class 1 clearance fits assumed.

You might also like