100% found this document useful (1 vote)
3K views2 pages

YAESU FT 857d Cheatsheet

This document provides a quick reference for various menu items and functions available on the Yaesu FT-857D radio transceiver. It lists 60 menu items numbered 001 through 061 with descriptions of their functions and available adjustment values. The default values are also provided for each menu item setting.

Uploaded by

Cristian Alvarez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
3K views2 pages

YAESU FT 857d Cheatsheet

This document provides a quick reference for various menu items and functions available on the Yaesu FT-857D radio transceiver. It lists 60 menu items numbered 001 through 061 with descriptions of their functions and available adjustment values. The default values are also provided for each menu item setting.

Uploaded by

Cristian Alvarez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

No Menu Item Function Available Values Default No Menu Item Function Available Values Default

Yaesu FT-857D Quick Reference


001 EXT MENU Enables/Dis ables the extended Menu ON/OFF OFF 046 DSP HPF CUTOFF Adjusts the low-cut characteris tics of the 100 ~ 1000 Hz 100 Hz
Mode. DSP HPF filter.
002 144MHz ARS Activates/deactivates the Automatic ON/OFF 1 047 DSP LPF CUTOFF Adjusts the high-cut characteris tics of the 1000 ~ 6000 Hz 6000 Hz
Repeater Shift feature when operating DSP LPF filter.
on the 144 MHz band.
003 430MHz ARS Activates/deactivates the Automatic ON/OFF 1 048 DSP MIC EQ Sets the DSP microphone equalization OFF/LPF/HPF/BOT OFF
Repeater Shift feature when operating pattern. H
on the 430 MHz band.
004 AM&FM DIAL Enabling/disabling t he DIAL knob on t he AM ENABLE/DISABLE DISABLE 049 DSP NR LEVEL Setting of the degree of DSP Noise 1 ~ 16 8
and FM m odes. Reduction.
005 AM MIC GAIN Adjusts the microphone gain level for 0 ~ 100 50 050 EMERGENCY Enables Tx/Rx operation on the Alaska ON/OFF OFF
the AM m ode. Em ergency Channel, 5167.5 kHz.
006 AM STEP Selects the t uning st eps for t he SELECT knob 2.5/5/9/10/12.5/25 1 051 FM MIC GAIN Adjusts the microphone gain level for the 0 ~ 100 50
on the AM m ode. kHz FM mode.
007 APO TIME Selects the Auto Power Off tim e (tim e OFF/1h ~ 6h OFF 052 FM STEP Selects the tuning steps for the SELECT 5/6.25/10/12.5/15/ 2
before power goes off). knob in the FM mode. 20/25/50 kHz
008 ARTS BEEP Selects the ARTS beep mode. OFF/RANGE/ALL RANGE 053 HOME-->VFO Enables/dis ables the moving of HOME ON/OFF ON
channel data to the VFO.
009 ARTS ID Enables/dis ables the CW identifier ON/OFF OFF 054 LOCK MODE Selects the operation of the front panels DIAL/FREQ/PANE DIAL
during ARTS operation. LOCK key. L/ALL
010 ARTS IDW Stores your calls ign into the CW YAESU 055 MEM GROUP Enables/dis ables the mem ory grouping ON/OFF OFF
identifier. feature.
011 BEACON TEXT 1 Stores the message for the Beacon. 056 MEM TAG Stores Alpha-Numeric Tags for the
m emory channels.
012 BEACON TIME Selects the interval tim e (between OFF/1 sec ~ OFF 057 MEM/VFO DIAL MODE
Selects the function which is engaged CW MHz/MEM GRP
message and message). 255sec when you press the SELECT knob. SIDETONE,CW
SPEED,MHz/MEM
GRP,MIC GAIN,
NB LEVEL,RF
POWER, STEP
013 BEEP TONE Selects the beep frequency. 440/880/1760 Hz 880Hz 058 MIC SCAN Enables/dis ables scanning access via the ON/OFF ON
m icrophones [UP]/[DWN] keys.
014 BEEP VOL Selects the beep volum e level. 0 ~ 100 50 059 MIC SEL The choice of the equipment which NOR/RMT/CAT NOR
connects to the MIC jack.
015 CAR LSB R Sets the Rx Carrier Point for LSB. 300 ~ +300 Hz 0 Hz 060 MTR ARX SEL Select the analog meter dis play SIG, CTR, VLT, SIG
configuration while the trans ceiver is N/A, FS,OFF
receiving.
016 CAR LSB T Sets the Tx Carrier Point for LSB 300 ~ +300 Hz 0 Hz 061 MTR ATX SEL Selects the analog meter display PWR, ALC, MOD, PWR
configuration while the trans ceiver is SWR,VLT, N/A,
transm itting. OFF
017 CAR USB R Sets the Rx Carrier Point for USB 300 ~ +300 Hz 0 Hz 062 MTR PEAK HOLD Enabling/disabling of the peak hold ON/OFF ON
function of the m eter.
018 CAR USB T Sets the Tx Carrier Point for USB 300 ~ +300 Hz 0 Hz 063 NB LEVEL Setting of the blanking level for the IF Noise 0 ~ 100 50
Blanker.
019 CAT RATE Sets the transceivers circuitry for the 4800 bps/9600 4800bps 064 OP FILTER 1 Not available at this tim e.

1 Volume 9 DSP Menu 020 CAT/LIN/TUN


CAT baud rate to be used. bps/38400 bps
Selects the device which is connected CAT/LINEAR/TUN CAT 065 PG A Program ming the [A] key (in the Operating All Multi Function, MONI

2 RF Gain 10 Fast / Hold for Power


to the CAT/LINEAR jack on the rear ER Function Row q (MFq)) function. All Menu Item ,
panel. MONI, Q.SPL,
021 CLAR DIAL SEL Defines the control knob to be used SEL, MAIN SEL 066 PG B Program ming the [B] key (in the Operating TCALL, ATC and Q. SPL
3 Select Knob (Push to 11 TX / Busy for setting of the clarifier offset
frequency.
Function Row q (MFq)) function. USER.

tune Mhz) 022 CW AUTO MODE Selects whether the KEY jack shall be
Enabled or Disabled while us ing
ON/OFF OFF 067 PG C Program ming the [C] key (in the Operating
Function Row q (MFq)) function.
ATC

4 Home 12 Change Band


the SSB/FM modes.
023 CW BFO Sets the CW carrier oscillator injection USB/LSB/AUTO USB 068 PG ACC Program ming the optional MH-59A8J MONI
side on the CW mode. m icrophones [ACC] button assignm ent.
5 Clar / IF Shift 13 VFO / Memory 024 CW DELAY Sets the receiver recovery tim e during FULL/30 ~ 3000
pseudo0VOX CW sem i-break-in m sec
250 m sec 069 PG P1 Program ming the optional MH-59A8J
m icrophones [P1] button as signment.
Q. SPL

6 FunctionMenu / Hold for 14 LOCK 025 CW KEY REV


operation.
Sets the keyer paddles wiring NORMAL/REVERS NORMAL 070 PG P2 Program ming the optional MH-59A8J TCALL
configuration. E m icrophones [P2] button as signment.
Menu 026 CW PADDLE Enables/dis ables CW keying by the
microphones [UP]/[DWN] keys.
ELEKEY/MICKEY ELEKEY 071 PKT 1200 Adjusts the audio input level from the TNC
during 1200 bps Packet operation.
0 ~ 100 50

7 Menu Keys 15 Main Dial (select 027 CW PITCH Setting of the pitch of the CW
sidetone, BFO offset, and CW filter
400 ~ 800 Hz 700 Hz 072 PKT 9600 Adjusts the audio input level from the TNC
during 9600 bps Packet operation.
0 ~ 100 50

frequency or menu option) 028 CW QSK


center frequencies.
Selects the tim e delay between when 10/15/20/25/30 10 ms 073 PKT RATE Sets the transceivers circui try for the 1200/9600 (bps) 1200 bps

8 Mode (LSB <> USB <> 16 Main Display the PTT is keyed and the carrier is
transmitted during QSK operation
ms Packet baud rate to be used.

when using the internal keyer.


CW <> CWR <> AM <> 029 CW SIDE TONE Setting of the CW sidetone volum e
level.
0 ~ 100 50 074 PROC LEVEL Sets the compression level for the AF
speech proces sor in the SSB/AM m odes.
0 ~ 100 50

FM <> DIG <> PKT <> 030 CW SPEED Sets the sending speed for the built-in
Electronic keyer.
4 ~ 60 wpm
(1wpm /step)/20 ~
12 wpm (60 cpm ) 075 RF POWER SET Setting of the m axim um power level for the
current band.
5 ~ 100 2 ~ 100
(UHF)
2

LSB) 300 cpm


(5cpm/step)
031 CW TRAINING Sends random Morse Code five- N, A, AN N 076 RPT SHIFT Sets the magnitude of the repeater shift. 0.00 ~ 99.99 (MHz) 2
character groups via the sidetone.
032 CW WEIGHT Sets the Dot:Dash ratio for the built-in 1:2.5 ~ 1:4.5 01:03.00 077 SCAN MODE Selects the desired Scan-Resume mode. TIME/BUSY/STOP TIME
electronic keyer.

Front Panel Menus


033 DCS CODE Setting of the DCS code. 104 Standard 23 078 SCAN RESUME Sets the delay tim e for scanning 1 ~ 10 (s ec) 5 sec
DCS codes resumption.
034 DCS INV Selects Norm al or Inverted DCS Tn-Rn/Tn-Riv/Tiv- Tn-Rn 079 SPLIT TONE Enables/dis ables split CTCSS/DCS ON/OFF OFF
coding. Rn/Tiv-Riv cording.
035 DIAL STEP Setting of the DIAL knobs tuning FINE/COARSE FINE 080 SQL/RF GAIN Selects the configuration of the front RF-GAIN/SQL 1
speed. panels SQL/RF knob.
036 DIG DISP Defines the dis played frequency offset 3000 ~ +3000 Hz 0 Hz 081 SSB MIC GAIN Adjusts the microphone gain level for the 0 ~ 100 50
MFa A/B A=B SPL MFj SPOT BK KEY during DIG (USER-L or USER-U)
mode operation.
SSB mode.

MFb MW SKIP TAG MFk TUNE DWN UP 037 DIG GAIN Adjusts the audio input level from
terminal equipment during DIG
0 ~ 100 50 082 SSB STEP Selects the tuning steps for the SELECT
knob on the SSB m ode.
1kHz/2.5kHz/5kHz 2.5kHz

(Digital) m ode operation.


MFc STO RCL PROC MFl NB AGC AGC SPD 038 DIG MODE Selects the mode and sideband in the RTTY-L/RTTY- RTTY-L 083 TONE FREQ Setting of the CTCSS Tone Frequency. 50 Standard 88.5 Hz
DIG (Dig ital) m ode. U/PSK31-L/RTTY- CTCSS tones
MFd RPT REV VOX MFm IPO ATT NAR L/PSK31-U/USER-
L/USER-U

MFe TON/ENC ----/DEC TDCH MFn CFIL FIL-1 FIL-2 039 DIG SHIFT Defines the carrier frequency offset
during DIG (USER-L or USER-U)
3000 ~ +3000 Hz 0 Hz 084 TOT TIME Select the Tim e-Out Tim er tim e. OFF/1 ~ 20 (min) OFF

mode operation.
MFf ARTS SRCH PMS MFo PLY1 PLY2 PLY3 040 DIG VOX Sets the gain of the VOX circuitrys
input level for the DIG m ode.
0 ~ 100 0 085 TUNER/ATAS Selects the device (FC-30 or ATAS-100/-
120) to be controlled via the front panels
OFF/ATAS(HF)/AT
AS(HF&50)/ATAS(
OFF

MFg SCN PRI DW MFp DNR DNF DBF 041 DISP COLOR Selects the illumination color for each FIX: 26 086 TX IF FILTER
[A](TUNE) key.
Selects the Trans m it IF filter.
ALL)/TUNER
CFIL/FIL1/FIL2 CFIL

SCOP WID STEP UPRG1 UPRG2 UPRG3


operating status.
MFh MFq 042 DISP CONTRAST Setting of the dis play contrast level. 1 ~ 13 5 087 VOX DELAY Sets the hang tim e for the VOX circuitry. 100 ~ 3000 (ms) 500 m s
043 DISP INTENSITY Setting of the dis play brightness level. 1 (Dim) ~ 3 3 088 VOX GAIN Sets the gain of the VOX circuitrys input 1 ~ 100 50
MFi MTR DISP 044 DISP MODE Sets up the LCD Lamp mode.
(Bright)
OFF/AUTO1/AUTO AUTO2 089 XVTR A FREQ
audio detector.
Allows an arbitrary frequency to be set on 0,000,00 ~
2/ON the dis play, to allow direct frequency 9999,999,00 (kHz)
045 DSP BPF WIDTH Setting of the bandwidth for the DSP 60/120/240 Hz 240 Hz 090 XVTR B FREQ readout during transverter operation.
CW audio filter.
091 XVTR SEL Enables/dis ables/selects the antenna port OFF/X VTR A/X OFF
to be used for Transverter operation. VTR B
No Menu Item Function Available Values Default No Menu Item Function Available Values Default
Enables/Dis ables the extended Menu Adjusts the low-cut characteris tics of the

Yaesu FT-857D Quick Reference


001 EXT MENU ON/OFF OFF 046 DSP HPF CUTOFF 100 ~ 1000 Hz 100 Hz
Mode. DSP HPF filter.
002 144MHz ARS Activates/deactivates the Automatic ON/OFF 1 047 DSP LPF CUTOFF Adjusts the high-cut characteris tics of the 1000 ~ 6000 Hz 6000 Hz
Repeater Shift feature when operating DSP LPF filter.
on the 144 MHz band.
003 430MHz ARS Activates/deactivates the Automatic ON/OFF 1 048 DSP MIC EQ Sets the DSP microphone equalization OFF/LPF/HPF/BOT OFF
Repeater Shift feature when operating pattern. H
on the 430 MHz band.
004 AM&FM DIAL Enab ling /disabl ing t he DIAL knob on t he A M ENABLE/DISABLE DISABLE 049 DSP NR LEVEL Setting of the degree of DSP Noise 1 ~ 16 8
and FM m odes. Reduction.
005 AM MIC GAIN Adjusts the microphone gain level for 0 ~ 100 50 050 EMERGENCY Enables Tx/Rx operation on the Alaska ON/OFF OFF
the AM m ode. Em ergency Channel, 5167.5 kHz.
006 AM STEP Sel ects the t un ing st ep s for t he SELECT knob 2.5/5/9/10/12.5/25 1 051 FM MIC GAIN Adjusts the m icrophone gain level for the 0 ~ 100 50
on the AM m ode. kHz FM mode.
007 APO TIME Selects the Auto Power Off time (tim e OFF/1h ~ 6h OFF 052 FM STEP Selects the tuning steps for the SELECT 5/6.25/10/12.5/15/ 2
before power goes off). knob in the FM mode. 20/25/50 kHz
008 ARTS BEEP Selects the ARTS beep mode. OFF/RANGE/ALL RANGE 053 HOME-->VFO Enables/dis ables the moving of HOME ON/OFF ON
channel data to the VFO.
009 ARTS ID Enables/dis ables the CW identifier ON/OFF OFF 054 LOCK MODE Selects the operation of the front panels DIAL/FREQ/PANE DIAL
during ARTS operation. LOCK key. L/ALL
010 ARTS IDW Stores your calls ign into the CW YAESU 055 MEM GROUP Enables/dis ables the mem ory grouping ON/OFF OFF
identifier. feature.
011 BEACON TEXT 1 Stores the message for the Beacon. 056 MEM TAG Stores Alpha-Numeric Tags for the
m emory channels .
012 BEACON TIME Selects the interval tim e (between OFF/1 sec ~ OFF 057 MEM/VFO DIAL MODE
Selects the function which is engaged CW MHz/MEM GRP
message and message). 255sec when you press the SELECT knob. SIDETONE,CW
SPEED,MHz/MEM
GRP,MIC GAIN,
NB LEVEL,RF
POWER, STEP
013 BEEP TONE Selects the beep frequency. 440/880/1760 Hz 880Hz 058 MIC SCAN Enables/dis ables scanning access via the ON/OFF ON
m icrophones [UP]/[DWN] keys.
014 BEEP VOL Selects the beep volum e level. 0 ~ 100 50 059 MIC SEL The choice of the equipment which NOR/RMT/CAT NOR
connects to the MIC jack.
015 CAR LSB R Sets the Rx Carrier Point for LSB. 300 ~ +300 Hz 0 Hz 060 MTR ARX SEL Select the analog meter dis play SIG, CTR, VLT, SIG
configuration while the transceiver is N/A, FS,OFF
receiving.
016 CAR LSB T Sets the Tx Carrier Point for LSB 300 ~ +300 Hz 0 Hz 061 MTR ATX SEL Selects the analog meter dis play PWR, ALC, MOD, PWR
configuration while the transceiver is SWR,VLT, N/A,
transm itting. OFF
017 CAR USB R Sets the Rx Carrier Point for USB 300 ~ +300 Hz 0 Hz 062 MTR PEAK HOLD Enabling/disabling of the peak hold ON/OFF ON
function of the m eter.
018 CAR USB T Sets the Tx Carrier Point for USB 300 ~ +300 Hz 0 Hz 063 NB LEVEL Setting of the blanking level for the IF Noise 0 ~ 100 50
Blanker.
019 CAT RATE Sets the transceivers circuitry for the 4800 bps/9600 4800bps 064 OP FILTER 1 Not available at this tim e.
CAT baud rate to be used. bps/38400 bps
1 Volume 9 DSP Menu 020 CAT/LIN/TUN Selects the device which is connected CAT/LINEAR/TUN
to the CAT/LINEAR jack on the rear ER
CAT 065 PG A Program ming the [A] key (in the Operating
Function Row q (MFq)) function.
All Multi Function,
All Menu Item ,
MONI

2 RF Gain 10 Fast / Hold for Power panel.


021 CLAR DIAL SEL Defines the control knob to be used SEL, MAIN SEL 066 PG B Program ming the [B] key (in the Operating
MONI, Q.SPL,
TCALL, ATC and Q. SPL
for setting of the clarifier offset Function Row q (MFq)) function. USER.
3 Select Knob (Push to 11 TX / Busy frequency.
022 CW AUTO MODE Selects whether the KEY jack shall be ON/OFF OFF 067 PG C Program ming the [C] key (in the Operating ATC
tune Mhz) Enabled or Disabled while us ing
the SSB/FM modes.
Function Row q (MFq)) function.

4 Home 12 Change Band 023 CW BFO Sets the CW carrier oscillator injection USB/LSB/AUTO
side on the CW mode.
USB 068 PG ACC Program ming the optional MH-59A8J
m icrophones [ACC] button assignm ent.
MONI

024 CW DELAY Sets the receiver recovery tim e during FULL/30 ~ 3000 250 m sec 069 PG P1 Program ming the optional MH-59A8J Q. SPL
5 Clar / IF Shift 13 VFO / Memory pseudo0VOX CW sem i-break-in
operation.
m sec m icrophones [P1] button as signment.

6 FunctionMenu / Hold for 14 LOCK 025 CW KEY REV Sets the keyer paddles wiring
configuration.
NORMAL/REVERS
E
NORMAL 070 PG P2 Program ming the optional MH-59A8J
m icrophones [P2] button assignment.
TCALL

Enables/dis ables CW keying by the Adjusts the audio input level from the TNC
Menu
026 CW PADDLE ELEKEY/MICKEY ELEKEY 071 PKT 1200 0 ~ 100 50
microphones [UP]/[DWN] keys. during 1200 bps Packet operation.
027 CW PITCH Setting of the pitch of the CW 400 ~ 800 Hz 700 Hz 072 PKT 9600 Adjusts the audio input level from the TNC 0 ~ 100 50
7 Menu Keys 15 Main Dial (select sidetone, BFO offset, and CW filter
center frequencies.
during 9600 bps Packet operation.

frequency or menu option) 028 CW QSK Selects the tim e delay between when
the PTT is keyed and the carrier is
10/15/20/25/30
ms
10 ms 073 PKT RATE Sets the transceivers circuitry for the
Packet baud rate to be used.
1200/9600 (bps) 1200 bps

transmitted during QSK operation


8 Mode (LSB <> USB <> 16 Main Display when using the internal keyer.
029 CW SIDE TONE Setting of the CW sidetone volum e 0 ~ 100 50 074 PROC LEVEL Sets the compression level for the AF 0 ~ 100 50
CW <> CWR <> AM <> 030 CW SPEED
level.
Sets the sending speed for the built-in 4 ~ 60 wpm 12 wpm (60 cpm ) 075 RF POWER SET
speech processor in the SSB/AM m odes.
Setting of the m axim um power level for the 5 ~ 100 2 ~ 100 2

FM <> DIG <> PKT <> Electronic keyer. (1wpm /step)/20 ~


300 cpm
current band. (UHF)

(5cpm/step)
LSB) 031 CW TRAINING Sends random Morse Code five- N, A, AN N 076 RPT SHIFT Sets the magnitude of the repeater shift. 0.00 ~ 99.99 (MHz) 2
character groups via the sidetone.
032 CW WEIGHT Sets the Dot:Dash ratio for the built-in 1:2.5 ~ 1:4.5 01:03.00 077 SCAN MODE Selects the desired Scan-Resume mode. TIME/BUSY/STOP TIME
electronic keyer.
033 DCS CODE Setting of the DCS code. 104 Standard 23 078 SCAN RESUME Sets the delay tim e for scanning 1 ~ 10 (s ec) 5 sec

Front Panel Menus


DCS codes resumption.
034 DCS INV Selects Norm al or Inverted DCS Tn-Rn/Tn-Riv/Tiv- Tn-Rn 079 SPLIT TONE Enables/dis ables split CTCSS/DCS ON/OFF OFF
coding. Rn/Tiv-Riv cording.
035 DIAL STEP Setting of the DIAL knobs tuning FINE/COARSE FINE 080 SQL/RF GAIN Selects the configuration of the front RF-GAIN/SQL 1
speed. panels SQL/RF knob.
036 DIG DISP Defines the dis played frequency offset 3000 ~ +3000 Hz 0 Hz 081 SSB MIC GAIN Adjusts the microphone gain level for the 0 ~ 100 50
during DIG (USER-L or USER-U) SSB mode.

MFa A/B A=B SPL MFj SPOT BK KEY 037 DIG GAIN
mode operation.
Adjusts the audio input level from 0 ~ 100 50 082 SSB STEP Selects the tuning steps for the SELECT 1kHz/2.5kHz/5kHz 2.5kHz
terminal equipment during DIG knob on the SSB m ode.
MFb MW SKIP TAG MFk TUNE DWN UP 038 DIG MODE
(Digital) m ode operation.
Selects the mode and sideband in the RTTY-L/RTTY- RTTY-L 083 TONE FREQ Setting of the CTCSS Tone Frequency. 50 Standard 88.5 Hz
MFc STO RCL PROC MFl NB AGC AGC SPD DIG (Digital) m ode. U/PSK31-L/RTTY-
L/PSK31-U/USER-
CTCSS tones

MFd RPT REV VOX MFm IPO ATT NAR


L/USER-U

039 DIG SHIFT Defines the carrier frequency offset 3000 ~ +3000 Hz 0 Hz 084 TOT TIME Select the Tim e-Out Tim er tim e. OFF/1 ~ 20 (min) OFF
MFe TON/ENC ----/DEC TDCH MFn CFIL FIL-1 FIL-2 during DIG (USER-L or USER-U)
mode operation.

MFf ARTS SRCH PMS MFo PLY1 PLY2 PLY3 040 DIG VOX Sets the gain of the VOX circuitrys
input level for the DIG m ode.
0 ~ 100 0 085 TUNER/ATAS Selects the device (FC-30 or ATAS-100/-
120) to be controlled via the front panels
OFF/ATAS(HF)/AT
AS(HF&50)/ATAS(
OFF

[A](TUNE) key. ALL)/TUNER


MFg SCN PRI DW MFp DNR DNF DBF 041 DISP COLOR Selects the illumination color for each
operating status.
FIX: 26 086 TX IF FILTER Selects the Transm it IF filter. CFIL/FIL1/FIL2 CFIL

MFh SCOP WID STEP MFq UPRG1 UPRG2 UPRG3 042 DISP CONTRAST Setting of the dis play contrast level.
043 DISP INTENSITY Setting of the dis play brightness level.
1 ~ 13
1 (Dim ) ~ 3
5
3
087 VOX DELAY
088 VOX GAIN
Sets the hang tim e for the VOX circuitry.
Sets the gain of the VOX circuitrys input
100 ~ 3000 (ms)
1 ~ 100
500 m s
50
(Bright) audio detector.
MFi MTR DISP 044 DISP MODE Sets up the LCD Lamp mode. OFF/AUTO1/AUTO AUTO2 089 XVTR A FREQ Allows an arbitrary frequency to be set on 0,000,00 ~
2/ON the dis play, to allow direct frequency 9999,999,00 (kHz)
045 DSP BPF WIDTH Setting of the bandwidth for the DSP 60/120/240 Hz 240 Hz 090 XVTR B FREQ readout during transverter operation.
CW audio filter.
091 XVTR SEL Enables/dis ables/selects the antenna port OFF/X VTR A/X OFF
to be used for Transverter operation. VTR B

You might also like