OPERATING WEIGHT

2.990 - 3.465 kg
NET POWER
20,6 kW / 27,6 HP @ 2.500 rpm
BUCKET CAPACITY
0,035 - 0,13 m3

PC30MR-2

PC
30MR-2

Mini-Excavator

PC30MR-2
 PC30MR-2 MINI-EXCAVATOR

WALK-AROUND
Tradition and Innovation
The new compact mini-excavator is the product of the competence and the technology that KOMATSU has been
acquiring for over the past eighty years. The project has been developed with a constant attention to the needs of
customers from all over the world; the result is a user-friendly machine, which offers top class performance.

Performance Versatility
The new short tail PC30MR-2 supplies optimal power Many available congurations allow the operator to
and digging speed in conned spaces: yards, road choose the right machine for the specic job: short or
works, demolition works, sewers, wherever traditional long arm, cab or canopy, rubber or steel shoes, extra
machines cannot work. Sturdiness and excellent counterweight. Moreover, the 1 / 2 way auxiliary
stability ensure safety and condence in any hydraulic circuit consents to use multiple
condition. working tools, like the hammer, the
clamshell bucket, the auger,
etc.

Komatsu CLSS
The CLSS (Closed Load Sensing System)
hydraulic circuit guarantees power, speed and
perfect control to all movements, including
the combined ones. The main feature of this
system is the connection between the variable
displacement pump and the closed-centre
circuit with load sensing, which allows operators
to perform all movements with maximum
efciency, regardless of the load or the rpm.
These characteristics are highlighted by the
hydraulic servo-controls, which are by far the
easiest to use and require minimum efforts to
perform extremely precise manoeuvres.

Comfort
Despite its compact size, the PC30MR-2 offers
a comfort which has no equals: spacious cab, PPC
proportional servo-controls for all movements, sliding
door, gas spring assisted front window, storage
drawer, hook, cup holder, courtesy lamp and, upon
request, radio and air conditioning.

2
 MINI-EXCAVATOR PC30MR-2
OPERATING WEIGHT
2.990 - 3.465 kg

NET POWER
20,6 kW / 27,6 HP @ 2.500 rpm
Maintenance BUCKET CAPACITY
All periodic inspection points are easily accessible 0,035 - 0,13 m3
through the bonnets. The fuel and the hydraulic oil
tanks are located under the side bonnet, in a safe and
easy to reach position.
In addition, extra-ordinary maintenance can be
performed by simply tilting the cab upwards: under
the oor, the operator can nd all major hydraulic
components, like the main valve or the swing motor.

ORFS hydraulic face seal connectors

and DT electric connectors improve the
reliability of the machine and make repairs
easier and faster.
Special technical solutions have allowed
to extend up to 500 hours the intervals for
most ordinary maintenance operations,
such as pin greasing or engine oil
replacement.
Also, to avoid possible leakage, all tanks
are equipped with a draining hose:
this conrms once again the attention
KOMATSU pays to the environment.

3
 PC30MR-2 MINI-EXCAVATOR

OPERATOR'S ENVIRONMENT

The spacious cab has been developed with exceptional care for details, making the work environment noiseless
and comfortable. Special attention has been paid to the internal layout: ergonomic and dedicated PPC controls;
speed switch button on the panel instead of pedal, which consequently offers more oor room; adjustable seat;
gas spring assisted front window opening; efcient heating and ventilation system. Air conditioning is upon
request and guarantees optimal thermal comfort all year long.
Last, but not least, the upper rail type sliding door makes getting on/off the machine very easy and safe in any
situation.

4
 MINI-EXCAVATOR PC30MR-2

STRONG POINTS
Engine
The KOMATSU engine supplies the required power, keeping the fuel
consumption very low. By taking advantage of state of the art technolo-
gies, it ensures minimum levels of noise and emissions (STAGE 2).

Automatic Shift Down

Once turned on, this device automatically adjusts the hydraulic travel
motor to the working conditions: maximum displacement for faster
movements, minimum displacement for top drawbar pull. This process
doesnt require operators support.

Attachment line
The 1 / 2 way auxiliary hydraulic circuit allows the use of several tools for
different purposes: hammer, clamshell bucket, and so on. The switching
between the two options is realised simply by means of a cock, which is
located on the side of the machine and right behind a little bonnet.

X-Frame
The new casted type X-frame ensures maximum stress resistance
and optimal stress distribution; this shape makes the machine much
more rigid and reliable. In addition, it facilitates the usual undercarriage
cleaning operations and the spoil removing.

Additional Counterweight
The opportunity to quickly add and remove counterweight allows
conversion to the PC30MR-2 from 0-Tail to Short Tail and vice-versa,
thereby satisfying specic job-site requirements. Such counterweight
increases the machine stability and the lifting capacity.

5
 PC30MR-2 MINI-EXCAVATOR

DIMENSIONS & WORKING RANGE

50
BUCKET RANGE
845

Width Capacity Weight

No. of teeth
110
585

R 77 mm m3 (ISO7451) kg
5

300 0,035 55 2
60

85 400 0,07 65 3
500 0,095 80 4
4.630 (4.720) 600 0,12 90 5
1.485
3.580 (3.670) 1.050 650 0,13 95 5

2.530
320

545
355

300 1.610
1.250
1.650
1.550
2.105

Machine with Cab, Steel Shoes, Additional

Counterweight and Blade at Ground Level

2.010 (2.140) A - Distance from machines center B - Height at bucket pin.

Arm length 1.260 mm

A 2m 3m 4m Max. outreach
4.950 (5.180)

B Front. 360 Front. 360 Front. 360 Front. 360

3.450 (3.690)

3m / / (*) 785 600 / / (*) 805 403

2m / / (*) 1.005 580 (*) 825 365 (*) 805 330
1m / / (*) 1.325 545 (*) 1.000 415 (*) 830 305
360

0 m (*) 2.680 985 (*) 1.450 530 (*) 940 350 (*) 855 320
-1 m (*) 2.155 975 (*) 1.270 530 / / (*) 870 395
310

Unit: kgf
2.650 (2.900)
2.910 (3.280)

Arm length 1.660 mm

A 2m 3m 4m Max. outreach

B Front. 360 Front. 360 Front. 360 Front. 360

3m / / / / (*) 660 370 (*) 675 335
5.060 (5.365) 2m / / (*) 815 585 (*) 720 365 (*) 695 280
5.150 (5.490) 1 m (*) 2.490 990 (*) 1.190 545 (*) 845 350 (*) 720 265
0 m (*) 2.820 945 (*) 1.410 520 (*) 925 340 (*) 755 275
-1 m (*) 2.480 950 (*) 1.360 510 (*) 850 335 (*) 795 320
Unit: kgf

NOTE:
Ratings are based on ISO standard 10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
- The values marked with an asterisk (*) are limited by the hydraulic capacities - Calculations are based on the machine resting on a uniform and rm surface
- The lifting point is a hypothetical hook placed behind the bucket.

6
 MINI-EXCAVATOR PC30MR-2

SPECIFICATIONS
ENGINE SWING SYSTEM

The new generation engine has been developed to comply with the The rotation is operated by means of an orbital hydraulic motor.
strictest emission controls (STAGE 2). Single ball-bearing ring with internal, induction hardened toothring.
Model .....................................................................Komatsu 3D84E-5 Centralised lubrication of the unit.
Type............................................. emissionised 4-cycle diesel engine Swing speed............................................................................9,3 rpm
Displacement....................................................................... 1.496 cm
Bore stroke....................................................................84 90 mm
No. of cylinders ................................................................................. 3
Combustion..................................................................direct injection
Aspiration ................................................................................. natural
Net power (SAE J1349) .....................20,6 kW / 27,6 HP @ 2.500 rpm
IMPIANTO ELETTRICO
TRANSMISSION
Max. torque ...................................................... 94,6 Nm @ 1.500 rpm
Cooling system........................................................................... water Type..............................................2 speed hydrostatic transmission,
Air lter type ................................................................................... dry controlled and steered by means of two levers and two pedals
Starting ............................ electric motor with pre-heating air system Hydraulic motors ....................................................... 2 axial pistons
for cold climate Reduction system....................................... epiclyclic reduction gears
Max. drawbar pull..............................................3.335 daN (3.400 kgf)
Travel speed..................................................................2,6 - 4,6 km/h

IMPIANTO ELETTRICO
BLADE

IMPIANTO ELETTRICO
OPERATING WEIGHT Type........................................... electro-welded, single unit structure
Width height ...........................................................1.550 355 mm
Operating weight with standard bucket, fully serviced, +80 kg Max. liting above ground level.............................................. 360 mm
operator (ISO 6016). Max. depth below ground level .............................................. 310 mm
Operating weight with cab and rubber shoes ....................... 3.165 kg
Operating weight with cab and steel shoes .......................... 3.275 kg
Canopy .................................................................... -175 kg (optional)
Additional counterweight ....................................................... +190 kg

IMPIANTO ELETTRICO
UNDERCARRIAGE

Central lower casted X-frame and carriage frame with boxed section.
Shoes (each side) ............................................................................ 44
Track rollers (each side) .................................................................... 4
Shoe width ............................................................................. 300 mm
Ground pressure (standard) .............................................0,31 kg/cm

HYDRAULIC SYSTEM

Type............................................................................ Komatsu CLSS

Main pumps...................... variable displacement pump + gear pump
Max. pump ow......................................................72,7 + 20,6 ltr/min
Max. operating pressure:
Working equipment ..............................................26 MPa (260 bar) IMPIANTO ELETTRICO
ELECTRIC SYSTEM
Hydraulic motors:
Travel ......................................................2 variable displacement Voltage ......................................................................................... 12 V
Swing ...........................................................1 xed displacement Battery ........................................................................................68 Ah
Hydraulic cylinders (bore stroke): Alternator......................................................................................40 A
Boom ..........................................................................80 550 mm Starter motor ............................................................................ 2,0 kW
Arm .............................................................................75 495 mm
Bucket.........................................................................65 490 mm
Boom swing................................................................80 500 mm
Blade...........................................................................85 135 mm
Bucket digging force (ISO 6015) ........................2.942 daN (3.000 kg)
Arm crowd force (ISO 6015): IMPIANTOCAPACITIES
SERVICE ELETTRICO
1.260 mm arm.................................................1.765 daN (1.830 kg)
1.660 mm arm.................................................1.491 daN (1.520 kg) Fuel tank...................................................................................... 44 ltr
The digging equipment is fully controlled by PPC servo-controls. All Radiator and system .................................................................. 3,3 ltr
movements are stopped by lifting the safety levers on the tiltable Engine oil.................................................................................... 7,2 ltr
case. Hydraulic system......................................................................... 40 ltr

7
PC30MR-2

MINI-EXCAVATOR

STANDARD EQUIPMENT
ROPS (ISO 3471) / FOPS (ISO 10262) Two speeds with Automatic Shift 1 / 2 way auxiliary hydraulic circuit Adjustable suspension seat
tiltable cab with heating Down up to the boom Lifting cylinder guard
Sliding door 1.260 mm digging arm Blade Working light on boom
Steel shoes

OPTIONAL EQUIPMENT
ROPS (ISO 3471) / FOPS (ISO 10262) Air conditioning Cocks for bucket cylinder Biodegradable oil
tiltable canopy Bucket range (300 - 650 mm) Boom, arm and blade safety valves Rearview mirrors
Rubber shoes 1.300 mm ditch cleaning bucket Overloading alarm Cab/canopy working lights
1.660 mm digging arm Extension of the auxiliary hydraulic Travel acoustic alarm Front and top protection guards
Additional counterweight circuit up to the arm, with quick Rotating beacon
couplings

Manufacturer: Komatsu Utility Europe

Head Ofce via Atheste 4 35042 Este (Padova) - Italy
Tel. +39 0429 616111 Fax +39 0429 601000 www.komatsueurope.com [email protected]

Komatsu Europe
International NV
Mechelsesteenweg 586
B-1800 VILVOORDE (BELGIUM)
Tel. +32-2-255 24 11
Fax +32-2-252 19 81
www.komatsueurope.com

WESS002902 02/2005 Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.

Printed in Europe This specification sheet may contain attachments and optional equipment that are not available in your area.
Please consult your local Komatsu distributor for those items you may require. Materials and specifications are subject to change without notice.