MetalisEnergy TechnicalBrochure PDF
MetalisEnergy TechnicalBrochure PDF
MetalisEnergy TechnicalBrochure PDF
metalisenergy.com
[email protected]
Tel: +44 (0) 1670 856 586
Fax: +44 (0) 1670 503 213
Metalis Energy are world leading specialists in
high integrity, high pressure, safety critical
pipeline components and drilling manifold
systems for today's latest generation high-
performance environment drill-rigs and drill
ship applications. In todays demanding deep-
water harsh environments where safety, high-
performance and certified quality materials
are absolutely paramount, why take a chance
using substandard unquantified materials
where quality and testing are in doubt.
metalisenergy.com
2
Contents
4. Products Overview
5. Quality Assurance
6. Seamless Pipe
8. Manifold Fittings
20. ANSI B16.9 Fittings
29. API Products
37. Hammer Lug Unions
41. API Valves
50. Pipeline Hubs and Clamps
57. API 16c Hubs and Clamps
3
Products Overview
Manifold Packages
Choke & Kill manifolds including Control Panel
Mud Manifolds
Cement Manifolds
Mud / Gas Separators
Manifold Fittings
Long Sweep Elbows
Long Sweep & Long Sweep Full Flow Tees
Goosenecks
ANSI B16.9, Block & Cushion Type
API Products
API 6A Flanges
API 6A Studded Blocks
API 16A Hubs & Clamps
Hammer Unions
Hammer Unions in sizes 2 to 6, Fig 1002 through to 2202.
We can oer our unions in standard or sour gas service, using
either but weld or screwed ends.
4
Quality Assurance
Our dedication to quality assurance is second
to none. All of our projects are conducted
from start to finish using our strict quality
system which is in full accordance with BS EN
ISO 9001. We also ensure that all of the
products we offer are in accordance with all
relative industry standards and specific
customer requirements. We are always open
to any input from our customers as to how to
improve our products and services as we
continue to grow. All of our products can also
be manufactured to meet any necessary
specifications brought forward by our clients
whether it is chemical compositions or
specialist packaging.
metalisenergy.com
5
Seamless Pipe
All pipe and tubing supplied by Metalis Energy is supplied in accordance with the following international
standards where applicable.
Material certification to BS EN 10204 3.1 is provided as standard, material certification to BS EN 10204 3.2
can be provided if required.
Table 4.1
Brinell
Min Tensile Charpy Impact
Material Min Yield Strength Hardness
Strength value
number
Metalis can provide pipe and tubing in other material grades, please contact us with any other material
requirements you may have. Specic working pressures available upon request.
See the tables below for the dimensional data of standard Metalis pipe sizes. Please note that these are lists of
only the most common sizes stocked by Metalis. If you have any requirements for specic sizes or special
materials that are not in the lists please contact [email protected] and we will be more than happy to
assist.
6
Table 4.2
Outside
Nominal Bore Outside Diameter Inside Diameter Inside Diameter Wall thickness Weight
Diameter
(in) (Inches) (inches) (mm) (mm) (kg/m)
(mm)
7
High Pressure Manifold Fittings
Metalis Energy only supplies the highest quality manifold ttings manufactured in the UK from wrought steel forgings
far superior to steel casings or steel plate. The ttings have been designed to meet all of the following international
standards:
8
Metalis forged manifold xings are available for the following pressure ratings:
MAX WORKING
5,000psi 10,000psi 15,000psi
PREESSURE*
Material Carbon Manganese Steel Low Alloy steel Low Alloy steel
(ASTM A860 Gr WPHY (AISI 4130) (AISI 4130)
52)
Operating temps -46 to 204 deg C -46 to 204 deg C -46 to 204 deg C
*Working pressures can be aected by a number of factors such as butt weld prep sizes. Please contact Metalis for
specic working pressures.
All tees and crosses can be supplied with reducing connections, these may eect the sizes of these ttings, please
contact Metalis for clarication.
See the tables below for the dimensional data of standard Metalis manifold ttings. Please note that these are lists of
only the most common sizes stocked by Metalis. If you have any requirements for specic sizes or special materials
that are not in the lists please contact [email protected] and we will be more than happy to assist.
9
Long sweep 90 degree elbow
Table 5.1 Long Sweep 90 deg Elbow Standard Sizes (All dims in inches unless otherwise stated)
NB A B C D E WEIGHT
(KG)
10
Long sweep 45 degree elbow
Table 5.2 Long Sweep 45 deg Elbow Standard Sizes (All dims in inches unless otherwise stated)
NB A B C D E WEIGHT
(KG)
11
Long sweep full flow tee
Table 5.3 Long Sweep Full Flow Tee Standard Sizes (All dims in inches unless otherwise stated)
NB A B C D E F WEIGHT
(KG)
12
Long sweep tee
Table 5.4 Long Sweep Tee Standard Sizes (All dims in inches unless otherwise stated)
NB A B C D E F WEIGHT
(KG)
13
Long Sweep Tee C/W Integral Bull Plug
Table 5.5 Long Sweep Tee C/W Bull Plug Standard Sizes (All dims in inches unless otherwise stated)
NB A B C D E F WEIGHT
(KG)
14
Long Sweep Full Flow Cross
Table 5.6 Long Sweep Full Flow Cross Standard Sizes (All dims in inches unless otherwise stated)
NB A B C D E F WEIGHT
(KG)
15
90 Degree 3d Double Backed Elbow
Table 5.7 90 Deg 3D Double Backed Elbow Standard Sizes (All dims in inches unless otherwise stated)
NB A B C D E WEIGHT
(KG)
16
45 Degree 3d Doubled Backed Elbow
Table 5.8 45 Deg 3D Double Backed Elbow Standard Sizes (All dims in inches unless otherwise stated)
NB A B C D E WEIGHT
(KG)
17
Standpipe Gooseneck 160 Degree C/W
Top Outlet
Table 5.9 Standpipe Gooseneck 160 Deg Standard Sizes (All dims in inches unless otherwise stated)
NB A B C D E WEIGHT
(KG)
18
Standpipe Gooseneck 160 Degree C/W
Top Integral Bullplug
Table 5.10 Standpipe Gooseneck 160 Deg C/W Top Bull Plug Standard Sizes (All dims in inches unless
otherwise stated)
NB A B C D E WEIGHT
(KG)
19
ANSI B16.9 Fittings
Metalis Energy only supplies the highest quality ANSI B16.9 xings & block type ttings manufactured in UK. The
ttings have been designed to meet all of the following international standards:
NACE MR0175 Sulphide Stress Cracking Resistant Metallic Materials for Oil Field
Equipment
ASME VIII Division 1 section 13.10 Boiler and Pressure Vessel Code.
20
Table 6.1 Standard Fitting Materials
A182 F51 UNS 31803 65,000psi 90,000psi 237 HB 27J min AV -50 deg C
* Metalis can provide fittings in other material grades, please contact us with any other material requirements you
may have. Specific working pressures available upon request.
See the tables below for the dimensional data of standard Metalis fitting sizes. Please note that these are lists of only
the most common sizes stocked by Metalis. If you have any requirements for specific sizes or special materials that
are not in the lists please contact [email protected] and we will be more than happy to assist.
21
90 Degree Long Radius Elbow
Table 6.2 90 Deg Long Radius Elbow Standard Sizes (All dims in inches unless otherwise stated)
NB A B C WEIGHT
(KG)
22
45 Degree Long Radius Elbow
Table 6.3 45 Deg Long Radius Elbow Standard Sizes (All dims in inches unless otherwise stated)
NB A B C WEIGHT
(KG)
23
Buttweld Equal Tee
Table 6.4 Equal Tee Standard Sizes (All dims in inches unless otherwise stated)
NB A B C D E WEIGHT
(KG)
24
Buttweld Equal Cross
Table 6.5 Equal Cross Standard Sizes (All dims in inches unless otherwise stated)
NB A B C D E WEIGHT
(KG)
* Reducing tees and crosses are available; these may alter the dimensions of the ttings. Please contact
Metalis for further information.
25
Bull Plug
Table 6.6 Bull Plug Standard Sizes (All dims in inches unless otherwise stated)
NB () A B C D E WEIGHT
(KG)
26
Concentric Reducer
Table 6.7 Concentric Reducer Standard Sizes (All dims in inches unless otherwise stated)
NB () A B C D E WEIGHT
(SCH XXS) (KG)
27
Eccentric Reducer
Table 6.8 Eccentric Reducer Standard Sizes (All dims in inches unless otherwise stated)
NB () A B C D E WEIGHT
(SCH XXS) (KG)
28
API 6A Products
Metalis Energy only supplies the highest quality API 6A Products including anges and studded blocks manufactured
in UK. Flanges available are weld neck, target, blind & test blind.
They have been designed to be strictly in accordance with the following standards:
NACE MR0175 Sulphide Stress Cracking Resistant Metallic Materials for Oil Field Equipment.
PSL level 1, 2, 3 or 4
PR1 or PR2
See the tables below for the dimensional data of standard Metalis ange sizes. Please note that these are lists of
only the most common sizes stocked by Metalis. If you have any requirements for specic sizes or special materials
that are not in the lists please contact [email protected] and we will be more than happy to assist. Metalis
are capable of supplying all API sizes.
29
Type 6B Welding Neck Flanges 5,000 PSI Rated Working Pressure
Table 7.1 API 6A TYPE 6B 5,000psi Weldneck Flange dimensions (All dims in inches unless otherwise stated)
- A B - C D E F G H - - - - - J L M -
TOTAL THICKNESS OF
DIAMETER OF BOLTS
BASIC THICKNESS OF
MAXIMUM BORE OF
WELD NECK FLANGE
NECK DIAMETER OF
DIAMETER OF BOLT
DIAMETER OF BOLT
NUMBER OF BOLTS
DIAMETER OF HUB
TOTAL LENGTH OF
LENGTH OF BOLTS
MAX. CHAMFER
RING TYPE, RX
OF FLANGES
(SEE NOTES)
TOLERANCE
MAX. BORE
FLANGES
FLANGE
FLANGE
FLANGE
FLANGE
CIRLCE
HOLES
FACE
2-1/16 2.09 8.50 +0.06 0.12 4.88 1.81 1.50 4.12 6.50 8 7/8 1.00 +0.06 6.00 4.31 2.38 1.72 24
2-9/16 2.59 9.62 +0.06 0.12 5.38 1.94 1.62 4.88 7.50 8 1 1.12 +0.06 6.50 4.44 2.88 2.16 27
3-1/8 3.22 10.50 +0.06 0.12 6.62 2.19 1.88 5.25 8.00 8 1-1/8 1.25 +0.06 7.25 4.94 3.50 2.65 35
4-1/16 4.28 12.25 +0.06 0.12 7.62 2.44 2.12 6.38 9.50 8 1-1/4 1.38 +0.06 8.00 5.19 4.50 3.47 39
5-1/8 5.16 14.75 +0.06 0.12 9.00 3.19 2.88 7.75 11.50 8 1-1/2 1.62 +0.06 10.00 6.44 5.56 4.34 44
30
Type 6BX Welding Neck Flanges 10,000 PSI Rated Working Pressure
Table 7.2 API 6A TYPE 6BX 10,000psi Weldneck Flange dimensions (All dims in inches unless otherwise stated)
- A B - C D E F G H R J - - - - - -
DIAMETER OF RAISED
TOTAL THICKNESS OF
SMALL DIAMETER OF
LARGE DIAMETER OF
DIAMETER OF BOLTS
DIAMETER OG BOLT
OUTSIDE DIAMETER
DIAMETER OF BOLT
MINIMUM LENGTH
NUMBER OF BOLTS
BORE OF FLANGES
NOMINAL SIZE &
TOLERANCE (SEE
LENGTH OF HUB
MAX. CHAMFER
RADIUS OF HUB
RING NUMBER
OF STUD BOLT
OF FLANGES
TOLERANCE
MAX. BORE
BOLT HOLE
FLANGE
NOTES)
CIRLCE
HOLES
FACE
HUB
HUB
1-13/16 1.84 7.38 +0.06 0.12 4.12 1.66 3.50 2.56 1.91 0.38 5.75 8 0.88 +0.06 5.00 151
2-1/16 2.09 7.88 +0.06 0.12 4.38 1.73 3.94 2.94 2.03 0.38 6.25 8 0.88 +0.06 5.25 152
2-9/16 2.59 9.12 +0.06 0.12 5.19 2.02 4.75 3.62 2.25 0.38 7.25 8 7/8 1.00 +0.06 6.00 153
3-1/16 3.09 10.62 +0.06 0.12 6.00 2.30 5.59 4.34 2.50 0.38 8.50 8 1 1.12 +0.06 6.75 154
4-1/16 4.09 12.44 +0.06 0.12 7.28 2.77 7.19 5.75 2.88 0.38 10.19 8 1-1/8 1.25 +0.06 8.00 155
5-1/8 5.16 14.06 +0.06 0.12 8.69 3.13 8.81 7.19 3.19 0.38 11.81 12 1-1/8 1.25 +0.06 8.75 169
31
Type 6BX Welding Neck Flanges 15,000 PSI Rated Working Pressure
Table 7.3 API 6A TYPE 6BX 15,000psi Weldneck Flange dimensions (All dims in inches unless otherwise stated)
- A B - C D E F G H R J - - - - - -
DIAMETER OF RAISED
TOTAL THICKNESS OF
SMALL DIAMETER OF
LARGE DIAMETER OF
DIAMETER OF BOLTS
DIAMETER OG BOLT
OUTSIDE DIAMETER
DIAMETER OF BOLT
MINIMUM LENGTH
NUMBER OF BOLTS
BORE OF FLANGES
NOMINAL SIZE &
TOLERANCE (SEE
LENGTH OF HUB
MAX. CHAMFER
RADIUS OF HUB
RING NUMBER
OF STUD BOLT
OF FLANGES
TOLERANCE
MAX. BORE
BOLT HOLE
FLANGE
NOTES)
CIRLCE
HOLES
FACE
HUB
HUB
1-13/16 1.84 8.19 +0.06 0.12 4.19 1.78 3.84 2.81 1.88 0.38 6.31 8 7/8 1.00 +.06 5.50 151
2-1/16 2.09 8.75 +0.06 0.12 4.50 2.00 4.38 3.25 2.12 0.38 6.88 8 7/8 1.00 +.06 6.00 152
2-9/16 2.59 10.00 +0.06 0.12 5.25 2.25 5.06 3.94 2.25 0.38 7.88 8 1 1.12 +.06 6.75 153
3-1/16 3.09 11.31 +0.06 0.12 6.06 2.53 6.06 4.81 2.50 0.38 9.06 8 1-1/8 1.25 +.06 7.50 154
4-1/16 4.09 14.19 +0.06 0.12 7.62 3.09 7.69 6.25 2.88 0.62 11.44 8 1-3/8 1.50 +.06 9.25 155
5-1/8 5.16 16.50 +0.06 0.12 8.88 3.88 9.62 7.88 3.22 0.62 13.50 12 1-1/2 1.62 +.09 11.50 169
32
Type 6BX Blind Flanges 10,000 PSI Rated Working Pressure
Table 7.4 API 6A TYPE 6BX 10,000psi Blind Flange dimensions (All dims in inches unless otherwise stated)
- A B - C D E F G H R J - - - - - -
DIAMETER OF RAISED
TOTAL THICKNESS OF
SMALL DIAMETER OF
LARGE DIAMETER OF
DIAMETER OF BOLTS
DIAMETER OG BOLT
OUTSIDE DIAMETER
DIAMETER OF BOLT
MINIMUM LENGTH
NUMBER OF BOLTS
BORE OF FLANGES
NOMINAL SIZE &
TOLERANCE (SEE
LENGTH OF HUB
MAX. CHAMFER
RADIUS OF HUB
RING NUMBER
OF STUD BOLT
OF FLANGES
TOLERANCE
MAX. BORE
BOLT HOLE
FLANGE
NOTES)
CIRLCE
HOLES
FACE
HUB
HUB
1-13/16 1.84 7.38 +0.06 0.12 4.12 1.66 3.50 2.56 1.91 0.38 5.75 8 0.88 +.06 5.00 151
2-1/16 2.09 7.88 +0.06 0.12 4.38 1.73 3.94 2.94 2.03 0.38 6.25 8 0.88 +.06 5.25 152
2-9/16 2.59 9.12 +0.06 0.12 5.19 2.02 4.75 3.62 2.25 0.38 7.25 8 7/8 1.00 +.06 6.00 153
3-1/16 3.09 10.62 +0.06 0.12 6.00 2.30 5.59 4.34 2.50 0.38 8.50 8 1 1.12 +.06 6.75 154
4-1/16 4.09 12.44 +0.06 0.12 7.28 2.77 7.19 5.75 2.88 0.38 10.19 8 1-1/8 1.25 +.06 8.00 155
33
Type 6BX Blind Flanges 15,000 PSI Rated Working Pressure
Table 7.5 API 6A TYPE 6BX 10,000psi Blind Flange dimensions (All dims in inches unless otherwise stated)
- A B - C D E F G H R J - - - - - -
DIAMETER OF RAISED
TOTAL THICKNESS OF
SMALL DIAMETER OF
LARGE DIAMETER OF
DIAMETER OF BOLTS
DIAMETER OG BOLT
OUTSIDE DIAMETER
DIAMETER OF BOLT
MINIMUM LENGTH
NUMBER OF BOLTS
BORE OF FLANGES
LENGTH OF HUB
NOMINAL SIZE &
TOLERANCE (SEE
MAX. CHAMFER
RADIUS OF HUB
RING NUMBER
OF STUD BOLT
OF FLANGES
TOLERANCE
MAX. BORE
BOLT HOLE
FLANGE
NOTES)
CIRLCE
HOLES
FACE
HUB
HUB
1-13/16 1.84 8.19 +0.06 0.12 4.19 1.78 3.84 2.81 1.88 0.38 6.31 8 7/8 1.00 +.06 5.50 151
2-1/16 2.09 8.75 +0.06 0.12 4.50 2.00 4.38 3.25 2.12 0.38 6.88 8 7/8 1.00 +.06 6.00 152
2-9/16 2.59 10.00 +0.06 0.12 5.25 2.25 5.06 3.94 2.25 0.38 7.88 8 1 1.12 +.06 6.75 153
3-1/16 3.09 11.31 +0.06 0.12 6.06 2.53 6.06 4.81 2.50 0.38 9.06 8 1-1/8 1.25 +.06 7.50 154
4-1/16 4.09 14.19 +0.06 0.12 7.62 3.09 7.69 6.25 2.88 0.38 11.44 8 1-3/8 1.50 +.06 9.25 155
34
API 6A Studded Crosses & Tees
Table 7.6 API 6A 5,000psi Studded block dimensions (All dims in inches unless otherwise stated)
Table 7.7 API 6A 10,000psi Studded block dimensions (All dims in inches unless otherwise stated)
35
API 6A Studded Crosses & Tees
Table 7.8 API 6A 15,000psi Studded block dimensions (All dims in inches unless otherwise stated)
36
Fig 1002 Hammer Lug Union
Fig 1002 unions are a low allow steel union with an elastomer seal. Sizes 1
thru 4 use a lip type seal while size 5 and 6 use an Oring. 5 and 6
unions are available in butt weld end only. Fig 1002 unions are designed to
work at the following pressures:
Standard service:
1, 3 and 4 10,000psi
5 and 6 7,500psi
Sour service:
1, 3 and 4 7,500psi
5 and 6 5,000psi
Table 8.2 Fig 1002 dimensions (All dims in inches unless otherwise stated)
37
Fig 1502 Hammer Lug Union
Fig 1002 unions are designed to work at the following pressures:
Tab le 8.3 Fig 1502 dimensions (All dims in inches unless otherwise stated)
38
Fig 2202 Hammer Lug Union
Fig 2202 unions are a designed to work at 15,000psi standard or sour service
Table 8.4 Fig 2202 dimensions (All dims in inches unless otherwise stated)
39
API Valves
Metalis Energy only supplies the highest quality API 6A Products
All products have been designed to be strictly in accordance with the following standards:
NACE MR0175 Sulphide Stress Cracking Resistant Metallic Materials for Oil Field Equipment.
PSL level 1, 2, 3 or 4
Material Class, AA, BB, CC, DD, EENL
PR1 or PR2
Temperature classes: K thru Y (60degC to 345degC)
See the tables below for the dimensional data of common valve sizes. Please note that these are lists of only the
most common sizes stocked by Metalis. If you have any requirements for specic sizes or special materials that are
not in the lists please contact [email protected] and we will be more than happy to assist. Metalis are
capable of supplying all standard API sizes.
40
API 6A Manual Gate Valve
VALVE SIZE API RING BORE FACE TO CENTRELINE EXTREME CENTRELINE HANDWHEEL TURNS TO WEIGHT
GASKET DIAMETER FACE TO BASE BODY TO DIA OPEN (KGs)
(A) (B) (C) DIAMETER HANDWHEEL (F)
(D) (E)
2-1/16 5K R-24 2.06 14.62 5.88 7.25 14.44 12.00 13.5 92kg
2-9/16 5K R-27 2.56 16.62 6.50 7.75 15.38 16.00 15.5 127kg
3-1/8 5K R-35 3.12 18.62 7.88 9.62 16.25 16.00 18 165kg
4-1/16 5K R-39 4.06 21.62 10.12 10.75 17.88 20.00 24 262kg
5-1/8 5K R-44 5.12 28.62 13.00 14.12 24.12 24.00 23.5 686kg
1-13/16 10K BX-151 1.81 18.25 5.30 8.25 14.25 16.00 12 115kg
2-1/16 10K BX-152 2.06 20.50 5.75 8.25 14.44 16.00 13.5 118kg
2-9/16 10K BX-153 2.56 22.25 6.88 9.25 15.38 16.00 15.5 150kg
3-1/16 10K BX-154 3.06 24.38 8.06 10.25 16.25 20.00 18 230kg
4-1/16 10K BX-155 4.06 26.38 9.88 12.25 20.50 24.00 24 416kg
5-1/8 10K BX-169 5.12 29.00 13.00 14.12 24.12 24.00 23.5 670kg
41
API 6A Manual Gate Valve
VALVE SIZE API RING BORE FACE TO FACE CENTRELINE EXTREME CENTRELINE HANDWHEEL TURNS TO WEIGHT
GASKET DIAMETER (B) TO BASE BODY TO DIA OPEN
(A) (C) DIAMETER HANDWHEEL (F)
(D) (E)
1-13/16 15K BX-151 1.81 18.00 5.38 8.25 14.25 16.00 12 127kg
2-1/16 15K BX-152 2.06 19.00 6.12 8.25 14.44 16.00 13.5 136kg
2-9/16 15K BX-153 2.56 25.00 7.12 10.25 17.88 20.00 16 207kg
3-1/16 15K BX-154 3.06 23.56 9.00 12.00 19.00 20.00 19 380kg
4-1/16 15K BX-155 4.06 29.00 10.50 13.00 23.00 24.00 20 619kg
42
API 6A Hydraulic Gate Valve
VALVE SIZE API RING BORE FACE TO FACE CENTRELINE TO EXTREME BODY CENTRELINE TO ACTUATOR DIA WEIGHT (KGs)
GASKET DIAMETER (B) BASE DIAMETER TOP (F)
(A) (C) (D) (E)
2-1/16 10K BX-152 2.06 20.50 5.75 8.25 20.50 7.87 134
3-1/16 10K BX-154 3.06 24.38 8.06 10.25 23.45 7.87 250
4-1/16 10K BX-155 4.06 26.38 10.50 12.25 29.78 10.75 474
5-1/8 10K BX-169 5.12 29.00 13.00 14.12 34.12 11.25 789
43
7,500 Psi Mud Valves Butt Weld Ends
Table 9.3 7,500 psi Butt Weld End Mud Valve Dimensions
44
7,500 PSI Mud Valves API 6A Flanged Ends
Table 9.4 7,500 psi API 6A Flanged End Mud Valve Dimensions
VALVE SIZE API 6A RTJ TYPE END TO CENTRELINE CENTRELINE HANDWHEEL FLANGE BORE SIZE WEIGHT
FLANGE END TO BASE TO TOP DIA DIA AT SEAT
SIZE (A) (B) (C) (D) (F)
2 2-1/16 10K BX-152 13.50 3.25 11.88 14.00 7.88 2.00 70kg
3 2-9/16 10K BX-153 22.25 4.87 18.13 18.00 9.12 3.00 155kg
3 3-1/16 10K BX-154 27.12 4.87 18.13 18.00 10.62 3.00 162kg
5 4-1/16 10K BX-155 29.12 7.00 24.63 23.00 12.44 4.00 250kg
5 5-1/8 10K BX-169 29.00 5.75 30.64 26.00 14.06 5.13 375Kg
45
7,500 PSI Mud Valves Hub Ends
46
API 6A Plug Valves Hammer Union Ends
VALVE 6 BORE SIZE END TO END END TO HANDWHEEL CENTRE LINE CENTRELINE CENTRELINE WEIGHT
SIZE (A) (B) CENTRE DIA TO END OF TO TOP TO BOTTOM
OF PLUG (D) HANDWHEEL (F) (G)
(C) (E)
1 1 FIG 1502 MxF 0.94 9.50 5.69 n/a n/a 5.19 4.56 19kg
1 2 FIG 1502 MXF 0.94 10.56 5.88 n/a n/a 5.19 4.56 25kg
2 2 FIG 1502 MxF 1.75 13.88 7.88 n/a n/a 5.94 5.50 45kg
3 3 FIG 1502 MxF 2.75 17.52 9.00 12.00 11.75 6.62 6.78 99kg
47
API 6A Plug Valves Flanged Union Ends
VALVE API 6A RTJ TYPE BORE SIZE END TO END TO HANDWHEEL CENTRELINE CENTRELINE CENTRELINE WEIGHT
SIZE FLANGE SIZE (A) END CENTRE OF DIA TO END OF TO TOP TO BOTTOM
(B) PLUG (D) HANDWHEEL (F) (G)
(C) (E)
2 2-1/16 10K BX-152 2.06 15.50 7.75 n/a n/a 5.94 5.50 62kg
3 2-9/16 10K BX-153 2.56 18.00 9.00 12.00 11.75 6.62 6.78 117kg
3 3-1/16 10K BX-154 3.06 20.75 10.38 12.00 11.75 6.62 6.78 140kg
3 3-1/16 15K BX-154 3.06 23.56 11.78 16.00 12.20 6.80 6.97 170kg
48
Pipeline Hubs and Clamps
Metalis Energy will only supply the highest quality hubs and clamps designed to be strictly in accordance with the
following standards:
NACE MR0175 Sulphide Stress Cracking Resistant Metallic Materials for Oil Field Equipment.
See the tables below for the dimensional data of standard Metalis hub and clamp sizes. Please note that these are
lists of only the most common sizes stocked by Metalis. If you have any requirements for specic sizes or special
materials that are not in the lists please contact [email protected] and we will be more than happy to assist.
49
Pipeline Hubs and Clamps Standard Series Hubs
Table 10.1 Standard Series Hubs Dimensions (all dims in inches unless otherwise stated)
CLAMP NOMINAL PIPE SCH STANDARD HUB HUB HUB B/W LIP BLIND BW HUB BLIND
SIZE DIA DESIGNATION OUTSIDE LENGTH BACKFACE INSIDE THICKNESS HUD WEIGHT HUB
N.P.S OD (DN) DIA (B) DIA DIA (F) THICKNESS (KG) WEIGHT
(D) (A) (C) (E) (G) (KG)
1/2 DN15 Std 40 40S 1in5 2.00 1.75 1.50 0.62 0.31 1.31 0.3 0.4
1/2 DN15 XS 80 80S 1in5 2.00 1.75 1.50 0.55 0.31 1.31 0.3 0.4
1/2 DN15 160 1in4 2.00 1.75 1.50 0.47 0.31 1.31 0.3 0.4
1/2 DN15 XXS 1in4 2.00 1.75 1.50 0.25 0.31 1.31 0.3 0.4
3/4 DN20 Std 40 40S 1in7 2.00 1.75 1.50 0.82 0.31 1.31 0.2 0.4
3/4 DN20 XS 80 80S 1in7 2.00 1.75 1.50 0.74 0.31 1.31 0.3 0.4
50
Table 10.1 Standard Series Hubs Dimensions (all dims in inches unless otherwise stated) continued
CLAMP NOMINAL PIPE SCH STANDARD HUB HUB HUB B/W LIP BLIND BW HUB BLIND
SIZE DIA DESIGNATION OUTSIDE LENGTH BACKFACE INSIDE THICKNESS HUD WEIGHT HUB
N.P.S OD (DN) DIA (B) DIA DIA (F) THICKNESS (KG) WEIGHT
(D) (A) (C) (E) (G) (KG)
3/4 DN20 160 1in5 2.00 1.75 1.50 0.61 0.31 1.31 0.3 0.4
3/4 DN20 XXS 1in4 2.00 1.75 1.50 0.43 0.31 1.31 0.3 0.4
1 DN25 Std 40 40S 1in11 2.00 1.75 1.50 1.05 0.31 1.31 0.2 0.4
1 DN25 XS 80 80S 1in11 2.00 1.75 1.50 0.96 0.31 1.31 0.2 0.4
1 DN25 160 1in7 2.00 1.75 1.50 0.82 0.31 1.31 0.3 0.4
1 DN25 XXS 1in5 2.00 1.75 1.50 0.60 0.31 1.31 0.3 0.4
1-1/2 DN40 Std 40 40S 1.5in13 3.13 2.38 2.38 1.61 0.44 1.63 0.7 1.1
1-1/2 DN40 XS 80 80S 1.5in13 3.13 2.38 2.38 1.50 0.50 1.63 0.8 1.1
1-1/2 DN40 160 1.5in13 3.13 2.38 2.38 1.34 0.50 1.63 0.9 1.1
1-1/2 DN40 XXS 1.5in11 3.13 2.38 2.38 1.10 0.50 1.63 1.1 1.1
2 DN50 Std 40 40S 2in20 3.63 2.75 2.88 2.07 0.44 1.75 1.0 1.7
2 DN50 XS 80 80S 2in20 3.63 2.75 2.88 1.94 0.44 1.75 1.1 1.7
2 DN50 160 2in16 3.63 2.75 2.88 1.69 0.44 1.75 1.4 1.7
2 DN50 XXS 2in14 3.63 2.75 2.88 1.50 0.44 1.75 1.5 1.7
3 DN75 Std 40 40S 3in27 5.00 3.25 4.00 3.07 0.50 1.88 2.1 3.5
3 DN75 XS 80 80S 3in27 5.00 3.25 4.00 2.90 0.50 1.88 2.4 3.5
3 DN75 160 3in25 5.00 3.25 4.00 2.62 0.50 1.88 2.9 3.5
3 DN75 XXS 3in23 5.00 3.25 4.00 2.30 0.50 1.88 3.3 3.5
51
Table 10.1 Standard Series Hubs Dimensions (all dims in inches unless otherwise stated) continued
CLAMP NOMINAL PIPE SCH STANDARD HUB HUB HUB B/W LIP BLIND BW HUB BLIND
SIZE DIA DESIGNATION OUTSIDE LENGTH BACKFACE INSIDE THICKNESS HUD WEIGHT HUB
N.P.S OD (DN) DIA (B) DIA DIA (F) THICKNESS (KG) WEIGHT
(D) (A) (C) (E) (G) (KG)
4 DN100 Std 40 40S 4in40 6.00 3.63 5.00 4.03 0.50 2.13 3.1 5.9
4 DN100 XS 80 80S 4in40 6.00 3.63 5.00 3.83 0.50 2.13 3.5 5.9
4 DN100 160 4in34 6.00 3.63 5.00 3.44 0.50 2.13 4.5 5.9
4 DN100 XXS 4in31 6.00 3.63 5.00 3.15 0.50 2.13 5.2 5.9
5 DN125 Std 40 40S 5in52 7.50 4.38 6.50 5.05 0.63 2.75 6.0 12.6
5 DN125 XS 80 80S 5in52 7.50 4.38 6.50 4.81 0.63 2.75 6.7 12.6
5 DN125 160 5in46 7.50 4.38 6.50 4.31 0.63 2.75 8.7 12.6
5 DN125 XXS 5in40 7.50 4.38 6.50 4.06 0.63 2.75 9.9 12.6
6 DN150 Std 40 40S 6in62 9.25 4.63 7.75 6.07 0.75 2.88 9.2 19.5
6 DN150 XS 80 80S 6in56 9.25 4.63 7.75 5.76 0.81 2.88 11.3 19.5
6 DN150 120 6in54 9.25 4.63 7.75 5.50 0.81 2.88 12.6 19.5
6 DN150 160 6in52 9.25 4.63 7.75 5.19 0.81 2.88 13.9 19.5
6 DN150 XXS 6in52 9.25 4.63 7.75 4.90 0.81 2.88 14.8 19.5
8 DN200 Std 40 40S 8in82 11.50 5.38 10.00 7.98 0.75 3.19 15.0 34.6
8 DN200 XS 80 80S 8in76 11.50 5.38 10.00 7.63 0.75 3.19 18.3 34.6
8 DN200 100 8in76 11.50 5.38 10.00 7.44 0.75 3.19 19.2 34.6
8 DN200 120 8in72 11.50 5.38 10.00 7.19 0.75 3.19 21.7 34.6
8 DN200 140 8in72 11.50 5.38 10.00 7.00 0.75 3.19 22.6 34.6
8 DN200 XXS 8in67 11.50 5.38 10.00 6.88 0.75 3.19 24.0 34.6
8 DN200 160 8in67 11.50 5.38 10.00 6.81 0.75 3.19 24.3 34.6
52
Pipeline Hubs and Clamps Standard Series Seal Rings
Table 10.3 Standard Series Clamps Dimensions (all dims in inches unless otherwise stated)
CLAMP CLAMP BOLT CLAMP OVERALL CLAMP LUG CLAMP BOLT BOLT BOLT BOLT ASSEMBLY ASSEMBLY
SIZE ID CENTRES OD LENGTH WIDTH SEPERATION CLEARENCE DIAMETER LENGTH LUG PITCH CLEARENCE WIEGTH
(A) (B) (C) (D) (E) (F) (G) (H) (I) WIDTH (K) (L) (KG)
(J)
1in 1.69 3.25 2.81 4.25 1.38 2.19 2.63 0.50 3.50 2.25 1.25 1.91 1.9
1-1/2in 2.69 5.00 4.50 6.50 2.00 3.25 4.00 0.63 5.00 3.13 1.63 3.02 4.5
2in 3.20 5.75 5.50 7.50 2.00 3.52 4.50 0.75 5.25 3.38 1.81 3.59 6.0
3in 4.38 7.50 6.88 9.25 2.38 4.60 5.25 0.75 6.50 3.38 1.81 4.63 10.7
4in 5.38 8.50 8.25 10.50 2.38 5.40 6.00 0.88 7.50 4.00 2.06 5.39 13.0
5in 6.88 10.25 9.88 12.38 3.13 6.13 7.25 1.00 8.25 4.50 2.31 6.38 18.6
6in 8.38 12.63 12.00 15.25 3.75 6.88 8.75 1.13 10.63 5.25 2.44 7.96 31.9
8in 10.63 15.25 14.50 18.50 3.75 7.88 9.88 1.25 12.00 5.75 2.88 9.39 50.0
53
Table 10.2 Standard Series Seal Rings Dimensions (all dims in inches unless otherwise stated) continued
SEAL RING OUTSIDE DIAMETER INSIDE DIAMETER OVERALL THICKNESS RIB THICKNESS SEAL RING WIEGHT
(A) (B) (C) (D) (KG)
54
Pipeline Hubs and Clamps Standard Series Clamp
Table 10.2 Standard Series Seal Rings Dimensions (all dims in inches unless otherwise stated)
SEAL RING OUTSIDE DIAMETER INSIDE DIAMETER OVERALL THICKNESS RIB THICKNESS SEAL RING WIEGHT
(A) (B) (C) (D) (KG)
55
API 16C Hubs and Clamps
Metalis Energy only supplies the highest quality API 16 Products manufactured in UK. They have been designed to
be strictly in accordance with the following standards:
NACE MR0175 Sulphide Stress Cracking Resistant Metallic Materials for Oil Field Equipment.
See the tables below for the dimensional data of standard Metalis hub sizes. Please note that these are lists of only
the most common sizes stocked by Metalis. If you have any requirements for specic sizes or special materials that
are not in the lists please contact [email protected] and we will be more than happy to assist. Metalis are
capable of supplying all API sizes.
56
5,000 PSI API 16C Hubs and Clamps
Table 11.1 5,000 psi API 16C Hubs & Clamps Dimensions (all dims in inches unless otherwise stated)
NOMINAL BORE OUTSIDE DIAMETER LIP THICKNESS LARGE DIAMETER OF HUB MIN LENGTH OF HUB RING GASKET CLAMP NUMBER
SIZE (D) (C) (A) (E) NUMBER
(B)
57
10,000 PSI API 16C Hubs and Clamps
Table 11.1 10,000 psi API 16C Hubs & Clamps Dimensions (all dims in inches unless otherwise stated)
NOMINAL BORE OUTSIDE DIAMETER LIP THICKNESS LARGE DIAMETER OF HUB MIN LENGTH OF HUB RING GASKET CLAMP NUMBER
SIZE (D) (C) (A) (E) NUMBER
(B)
58
15,000 PSI API 16C Hubs and Clamps
Table 11.1 15,000 psi API 16C Hubs & Clamps Dimensions (all dims in inches unless otherwise stated)
NOMINAL BORE OUTSIDE DIAMETER LIP THICKNESS LARGE DIAMETER OF HUB MIN LENGTH OF HUB RING GASKET CLAMP NUMBER
SIZE (D) (C) (A) (E) NUMBER
(B)
59
Metalis Energy Ltd
Unit 1 Birchwood Way, Ashwood Business Park,
Ashington, Northumberland, NE63 0XD.
Registered in the UK: 06758233
metalisenergy.com
[email protected]
Tel: +44 (0) 1670 856 586
Fax: +44 (0) 1670 503 213
60